Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
d1fdb6d Linus Torvalds 09 June 2019, 03:24:46 UTC Linux 5.2-rc4 09 June 2019, 03:24:46 UTC
2759e05 Linus Torvalds 08 June 2019, 22:57:35 UTC Merge tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "A change to call iput() asynchronously to avoid a possible deadlock when iput_final() needs to wait for in-flight I/O (e.g. readahead) and a fixup for a cleanup that went into -rc1" * tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client: ceph: fix error handling in ceph_get_caps() ceph: avoid iput_final() while holding mutex or in dispatch thread ceph: single workqueue for inode related works 08 June 2019, 22:57:35 UTC
8e61f6f Linus Torvalds 08 June 2019, 20:16:05 UTC Merge tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "Just one fix for the Xen block frontend driver avoiding allocations with order > 0" * tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkfront: switch kcalloc to kvcalloc for large array allocation 08 June 2019, 20:16:05 UTC
3d4645b Linus Torvalds 08 June 2019, 20:12:54 UTC Merge tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - fix stack unwinder: the stack unwinder rework has on off-by-one bug which prevents following stack backchains over more than one context (e.g. irq -> process). - fix address space detection in exception handler: if user space switches to access register mode, which is not supported anymore, the exception handler may resolve to the wrong address space. * tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/unwind: correct stack switching during unwind s390/mm: fix address space detection in exception handling 08 June 2019, 20:12:54 UTC
d0cc617 Linus Torvalds 08 June 2019, 20:09:31 UTC Merge tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: - Declare ginvt() __always_inline due to its use of an argument as an inline asm immediate. - A VDSO build fix following Kbuild changes made this cycle. - A fix for boot failures on txx9 systems following memory initialization changes made this cycle. - Bounds check virt_addr_valid() to prevent it spuriously indicating that bogus addresses are valid, in turn fixing hardened usercopy failures that have been present since v4.12. - Build uImage.gz for pistachio systems by default, since this is the image we need in order to actually boot on a board. - Remove an unused variable in our uprobes code. * tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: uprobes: remove set but not used variable 'epc' MIPS: pistachio: Build uImage.gz by default MIPS: Make virt_addr_valid() return bool MIPS: Bounds check virt_addr_valid MIPS: TXx9: Fix boot crash in free_initmem() MIPS: remove a space after -I to cope with header search paths for VDSO MIPS: mark ginvt() as __always_inline 08 June 2019, 20:09:31 UTC
9331b67 Linus Torvalds 08 June 2019, 19:52:42 UTC Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ... 08 June 2019, 19:52:42 UTC
1ce2c85 Linus Torvalds 08 June 2019, 19:50:36 UTC Merge tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.2-rc4 to resolve a number of reported issues. The most "notable" one here is the kernel headers in proc^Wsysfs fixes. Those changes move the header file info into sysfs and fixes the build issues that you reported. Other than that, a bunch of small habanalabs driver fixes, some fpga driver fixes, and a few other tiny driver fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Read upper bits of trace buffer from RWPHI habanalabs: Fix virtual address access via debugfs for 2MB pages fpga: zynqmp-fpga: Correctly handle error pointer habanalabs: fix bug in checking huge page optimization habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close test_firmware: Use correct snprintf() limit genwqe: Prevent an integer overflow in the ioctl parport: Fix mem leak in parport_register_dev_model fpga: dfl: expand minor range when registering chrdev region fpga: dfl: Add lockdep classes for pdata->lock fpga: dfl: afu: Pass the correct device to dma_mapping_error() fpga: stratix10-soc: fix use-after-free on s10_init() w1: ds2408: Fix typo after 49695ac46861 (reset on output_write retry with readback) kheaders: Do not regenerate archive if config is not changed kheaders: Move from proc to sysfs lkdtm/bugs: Adjust recursion test to avoid elision lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical 08 June 2019, 19:50:36 UTC
902b2ed Linus Torvalds 08 June 2019, 19:48:49 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has a driver bugfix and a MAINTAINERS fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk 08 June 2019, 19:48:49 UTC
66b59f2 Linus Torvalds 08 June 2019, 19:46:31 UTC Merge tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: - jz4780 transfer fix for acking descriptors early - fsl-qdma: clean registers on error - dw-axi-dmac: null pointer dereference fix - mediatek-cqdma: fix sleeping in atomic context - tegra210-adma: fix bunch os issues like crashing in driver probe, channel FIFO configuration etc. - sprd: Fixes for possible crash on descriptor status, block length overflow. For 2-stage transfer fix incorrect start, configuration and interrupt handling. * tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: sprd: Add interrupt support for 2-stage transfer dmaengine: sprd: Fix the right place to configure 2-stage transfer dmaengine: sprd: Fix block length overflow dmaengine: sprd: Fix the incorrect start for 2-stage destination channels dmaengine: sprd: Add validation of current descriptor in irq handler dmaengine: sprd: Fix the possible crash when getting descriptor status dmaengine: tegra210-adma: Fix spelling dmaengine: tegra210-adma: Fix channel FIFO configuration dmaengine: tegra210-adma: Fix crash during probe dmaengine: mediatek-cqdma: sleeping in atomic context dmaengine: dw-axi-dmac: fix null dereference when pointer first is null dmaengine: fsl-qdma: Add improvement dmaengine: jz4780: Fix transfers being ACKed too soon 08 June 2019, 19:46:31 UTC
8d72e5b Linus Torvalds 08 June 2019, 19:12:11 UTC Merge tag 'for-linus-20190608' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Allow symlink from the bfq.weight cgroup parameter to the general weight (Angelo) - Damien is new skd maintainer (Bart) - NVMe pull request from Sagi, with a few small fixes. - Ensure we set DMA segment size properly, dma-debug is now tripping on these (Christoph) - Remove useless debugfs_create() return check (Greg) - Remove redundant unlikely() check on IS_ERR() (Kefeng) - Fixup request freeing on exit (Ming) * tag 'for-linus-20190608' of git://git.kernel.dk/linux-block: block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file block: free sched's request pool in blk_cleanup_queue nvme-rdma: use dynamic dma mapping per command nvme: Fix u32 overflow in the number of namespace list calculation mmc: also set max_segment_size in the device mtip32xx: also set max_segment_size in the device rsxx: don't call dma_set_max_seg_size nvme-pci: don't limit DMA segement size block: Drop unlikely before IS_ERR(_OR_NULL) block: aoe: no need to check return value of debugfs_create functions nvmet: fix data_len to 0 for bdev-backed write_zeroes MAINTAINERS: Hand over skd maintainership nvme-tcp: fix queue mapping when queue count is limited nvme-rdma: fix queue mapping when queue count is limited 08 June 2019, 19:12:11 UTC
1b02caa Linus Torvalds 08 June 2019, 18:54:17 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two bug fixes, both for fairly serious problems; the UFS one looks like it could be used to exfiltrate data from the kernel, although probably only a privileged user has access to the command management interface and the missing unlock in smartpqi is long standing and probably a little used error path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous() scsi: ufs: Check that space was properly alloced in copy_query_response 08 June 2019, 18:54:17 UTC
0ad43e2 Linus Torvalds 08 June 2019, 17:57:32 UTC Merge tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "This consists of a single fix for a vm test build failure regression when it is built by itself" * tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: vm: Fix test build failure when built by itself 08 June 2019, 17:57:32 UTC
79c3ba3 Linus Torvalds 08 June 2019, 00:39:31 UTC Merge tag 'drm-fixes-2019-06-07-1' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "A small bit more lively this week but not majorly so. I'm away in Japan next week for family holiday, so I'll be pretty disconnected, I've asked Daniel to do fixes for the week while I'm out. The nouveau firmware changes are a bit large, but they address a big problem where a whole set of boards don't load with the driver, and the new firmware fixes that, so I think it's worth trying to land it now. core: - Allow fb changes in async commits (drivers as well) udmabuf: - Unmap scatterlist when unmapping udmabuf nouveau: - firmware loading fixes for secboot firmware on new GPU revision. komeda: - oops, dma mapping and warning fixes arm-hdlcd: - clock fixes - mode validation fix i915: - Add a missing Icelake workaround - GVT - DMA map fault fix and enforcement fixes amdgpu: - DCE resume fix - New raven variation updates" * tag 'drm-fixes-2019-06-07-1' of git://anongit.freedesktop.org/drm/drm: (33 commits) drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device drm/komeda: Potential error pointer dereference drm/komeda: remove set but not used variable 'kcrtc' drm/amd/amdgpu: add RLC firmware to support raven1 refresh drm/amd/powerplay: add set_power_profile_mode for raven1_refresh drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2) udmabuf: actually unmap the scatterlist drm/arm/hdlcd: Allow a bit of clock tolerance drm/arm/hdlcd: Actually validate CRTC modes drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times drm/komeda: fixing of DMA mapping sg segment warning drm: don't block fb changes for async plane updates drm/vc4: fix fb references in async update drm/msm: fix fb references in async update drm/amd: fix fb references in async update ... 08 June 2019, 00:39:31 UTC
8f77293 Wolfram Sang 27 May 2019, 19:45:45 UTC MAINTAINERS: Karthikeyan Ramasubramanian is MIA A mail just bounced back with "user unknown": 550 5.1.1 <kramasub@codeaurora.org> User doesn't exist I also couldn't find a more recent address in git history. So, remove this stale entry. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 07 June 2019, 22:32:50 UTC
49b8095 Robert Hancock 04 June 2019, 21:55:51 UTC i2c: xiic: Add max_read_len quirk This driver does not support reading more than 255 bytes at once because the register for storing the number of bytes to read is only 8 bits. Add a max_read_len quirk to enforce this. This was found when using this driver with the SFP driver, which was previously reading all 256 bytes in the SFP EEPROM in one transaction. This caused a bunch of hard-to-debug errors in the xiic driver since the driver/logic was treating the number of bytes to read as zero. Rejecting transactions that aren't supported at least allows the problem to be diagnosed more easily. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org 07 June 2019, 22:24:07 UTC
d442564 Linus Torvalds 07 June 2019, 20:38:53 UTC Merge tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix a couple of inconsistencies and locking problems in pmbus driver - Register with thermal subsystem only on systems supporting devicetree * tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus/core) Treat parameters as paged if on multiple pages hwmon: (pmbus/core) mutex_lock write in pmbus_set_samples hwmon: (core) add thermal sensors only if dev->of_node is present 07 June 2019, 20:38:53 UTC
893a7d3 Jan Glauber 05 June 2019, 13:48:49 UTC lockref: Limit number of cmpxchg loop retries The lockref cmpxchg loop is unbound as long as the spinlock is not taken. Depending on the hardware implementation of compare-and-swap a high number of loop retries might happen. Add an upper bound to the loop to force the fallback to spinlocks after some time. A retry value of 100 should not impact any hardware that does not have this issue. With the retry limit the performance of an open-close testcase improved between 60-70% on ThunderX2. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jan Glauber <jglauber@marvell.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 June 2019, 20:15:06 UTC
d934452 Andrey Konovalov 04 June 2019, 12:04:47 UTC uaccess: add noop untagged_addr definition Architectures that support memory tagging have a need to perform untagging (stripping the tag) in various parts of the kernel. This patch adds an untagged_addr() macro, which is defined as noop for architectures that do not support memory tagging. The oncoming patch series will define it at least for sparc64 and arm64. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 June 2019, 20:09:06 UTC
d18c7e9 Linus Torvalds 07 June 2019, 20:06:00 UTC Merge tag 'xtensa-20190607' of git://github.com/jcmvbkbc/linux-xtensa Pull xtensa fix from Max Filippov: "Fix a section mismatch between memblock_reserve and mem_reserve. This fixes tinyconfig xtensa builds" * tag 'xtensa-20190607' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: Fix section mismatch between memblock_reserve and mem_reserve 07 June 2019, 20:06:00 UTC
6c70f89 Jens Axboe 07 June 2019, 20:04:28 UTC Merge branch 'nvme-5.2-rc-next' of git://git.infradead.org/nvme into for-linus Pull NVMe fixes from Sagi. * 'nvme-5.2-rc-next' of git://git.infradead.org/nvme: nvme-rdma: use dynamic dma mapping per command nvme: Fix u32 overflow in the number of namespace list calculation nvmet: fix data_len to 0 for bdev-backed write_zeroes nvme-tcp: fix queue mapping when queue count is limited nvme-rdma: fix queue mapping when queue count is limited 07 June 2019, 20:04:28 UTC
33de0d1 Linus Torvalds 07 June 2019, 18:59:20 UTC Merge tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild fixes from Masahiro Yamada: - fix kselftest-merge to find config fragments in deeper directories - fix kconfig unit test, which was broken by SPDX tag addition - add + prefix to buildtar to suppress jobserver unavailable warning - fix checkstack.pl to recognize arch=arm64 - suppress noisy warning from cc-cross-prefix * tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: use more portable 'command -v' for cc-cross-prefix scripts/checkstack.pl: Fix arm64 wrong or unknown architecture kbuild: tar-pkg: enable communication with jobserver kconfig: tests: fix recursive inclusion unit test kbuild: teach kselftest-merge to find nested config files 07 June 2019, 18:59:20 UTC
91f152e Linus Torvalds 07 June 2019, 18:52:31 UTC Merge tag 'mmc-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "Here's a couple of MMC and MEMSTICK fixes: MMC host: - sdhci: Fix SDIO IRQ thread deadlock - sdhci-tegra: Fix a warning message - sdhci_am654: Fix SLOTTYPE write - meson-gx: Fix IRQ ack - tmio: Fix SCC error handling to avoid false positive CRC error MEMSTICK core: - mspro_block: Fix returning a correct error code" * tag 'mmc-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci_am654: Fix SLOTTYPE write mmc: sdhci: Fix SDIO IRQ thread deadlock mmc: meson-gx: fix irq ack mmc: tmio: fix SCC error handling to avoid false positive CRC error mmc: tegra: Fix a warning message memstick: mspro_block: Fix an error code in mspro_block_issue_req() 07 June 2019, 18:52:31 UTC
a373ec2 Linus Torvalds 07 June 2019, 18:36:17 UTC Merge tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a crash during resume from hibernation introduced during the 4.19 cycle, cause the new Performance and Energy Bias Hint (EPB) code to be built only if CONFIG_PM is set and add a few missing kerneldoc comments. Specifics: - Fix a crash that occurs when a kernel with 'nosmt' in the command line is used to resume the system from hibernation (as the "restore" kernel), because memory mapping differences between the restore and image kernels cause SMT siblings to be woken up from idle states and subsequently they try to fetch instructions from incorrect memory locations (Jiri Kosina). - Cause the new Performance and Energy Bias Hint (EPB) code to be built only if CONFIG_PM is set, because that code is not really necessary otherwise (Rafael Wysocki). - Add kerneldoc comments to documents some helper functions related to system-wide suspend to avoid possible confusion regarding their purpose (Rafael Wysocki)" * tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86/power: Fix 'nosmt' vs hibernation triple fault during resume PM: sleep: Add kerneldoc comments to some functions x86: intel_epb: Do not build when CONFIG_PM is unset 07 June 2019, 18:36:17 UTC
de9f869 Jann Horn 02 June 2019, 01:15:58 UTC x86/insn-eval: Fix use-after-free access to LDT entry get_desc() computes a pointer into the LDT while holding a lock that protects the LDT from being freed, but then drops the lock and returns the (now potentially dangling) pointer to its caller. Fix it by giving the caller a copy of the LDT entry instead. Fixes: 670f928ba09b ("x86/insn-eval: Add utility function to get segment descriptor") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 June 2019, 18:11:06 UTC
1e1d926 Linus Torvalds 07 June 2019, 16:29:14 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Free AF_PACKET po->rollover properly, from Willem de Bruijn. 2) Read SFP eeprom in max 16 byte increments to avoid problems with some SFP modules, from Russell King. 3) Fix UDP socket lookup wrt. VRF, from Tim Beale. 4) Handle route invalidation properly in s390 qeth driver, from Julian Wiedmann. 5) Memory leak on unload in RDS, from Zhu Yanjun. 6) sctp_process_init leak, from Neil HOrman. 7) Fix fib_rules rule insertion semantic change that broke Android, from Hangbin Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ipv6: fix EFAULT on sendto with icmpv6 and hdrincl ipv6: use READ_ONCE() for inet->hdrincl as in ipv4 Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied" net: aquantia: fix wol configuration not applied sometimes ethtool: fix potential userspace buffer overflow Fix memory leak in sctp_process_init net: rds: fix memory leak when unload rds_rdma ipv6: fix the check before getting the cookie in rt6_get_cookie ipv4: not do cache for local delivery if bc_forwarding is enabled s390/qeth: handle error when updating TX queue count s390/qeth: fix VLAN attribute in bridge_hostnotify udev event s390/qeth: check dst entry before use s390/qeth: handle limited IPv4 broadcast in L3 TX path net: fix indirect calls helpers for ptype list hooks. net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set udp: only choose unbound UDP socket for multicast when not in a VRF net/tls: replace the sleeping lock around RX resync with a bit lock ... 07 June 2019, 16:29:14 UTC
6e38335 Linus Torvalds 07 June 2019, 16:25:27 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "Things are looking pretty quiet here in RDMA, not too many bug fixes rolling in right now. The usual driver bug fixes and fixes for a couple of regressions introduced in 5.2: - Fix a race on bootup with RDMA device renaming and srp. SRP also needs to rename its internal sys files - Fix a memory leak in hns - Don't leak resources in efa on certain error unwinds - Don't panic in certain error unwinds in ib_register_device - Various small user visible bug fix patches for the hfi and efa drivers - Fix the 32 bit compilation break" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/efa: Remove MAYEXEC flag check from mmap flow mlx5: avoid 64-bit division IB/hfi1: Validate page aligned for a given virtual address IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value IB/hfi1: Insure freeze_work work_struct is canceled on shutdown IB/rdmavt: Fix alloc_qpn() WARN_ON() RDMA/core: Fix panic when port_data isn't initialized RDMA/uverbs: Pass udata on uverbs error unwind RDMA/core: Clear out the udata before error unwind RDMA/hns: Fix PD memory leak for internal allocation RDMA/srp: Rename SRP sysfs name after IB device rename trigger 07 June 2019, 16:25:27 UTC
a02a532 Linus Torvalds 07 June 2019, 16:21:48 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Another round of mostly-benign fixes, the exception being a boot crash on SVE2-capable CPUs (although I don't know where you'd find such a thing, so maybe it's benign too). We're in the process of resolving some big-endian ptrace breakage, so I'll probably have some more for you next week. Summary: - Fix boot crash on platforms with SVE2 due to missing register encoding - Fix architected timer accessors when CONFIG_OPTIMIZE_INLINING=y - Move cpu_logical_map into smp.h for use by upcoming irqchip drivers - Trivial typo fix in comment - Disable some useless, noisy warnings from GCC 9" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Silence gcc warnings about arch ABI drift ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix arm64: arch_timer: mark functions as __always_inline arm64: smp: Moved cpu_logical_map[] to smp.h arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding() 07 June 2019, 16:21:48 UTC
913ab97 Masahiro Yamada 06 June 2019, 04:13:58 UTC kbuild: use more portable 'command -v' for cc-cross-prefix To print the pathname that will be used by shell in the current environment, 'command -v' is a standardized way. [1] 'which' is also often used in scripts, but it is less portable. When I worked on commit bd55f96fa9fc ("kbuild: refactor cc-cross-prefix implementation"), I was eager to use 'command -v' but it did not work. (The reason is explained below.) I kept 'which' as before but got rid of '> /dev/null 2>&1' as I thought it was no longer needed. Sorry, I was wrong. It works well on my Ubuntu machine, but Alexey Brodkin reports noisy warnings on CentOS7 when 'which' fails to find the given command in the PATH environment. $ which foo which: no foo in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin) Given that behavior of 'which' depends on system (and it may not be installed by default), I want to try 'command -v' once again. The specification [1] clearly describes the behavior of 'command -v' when the given command is not found: Otherwise, no output shall be written and the exit status shall reflect that the name was not found. However, we need a little magic to use 'command -v' from Make. $(shell ...) passes the argument to a subshell for execution, and returns the standard output of the command. Here is a trick. GNU Make may optimize this by executing the command directly instead of forking a subshell, if no shell special characters are found in the command and omitting the subshell will not change the behavior. In this case, no shell special character is used. So, Make will try to run it directly. However, 'command' is a shell-builtin command, then Make would fail to find it in the PATH environment: $ make ARCH=m68k defconfig make: command: Command not found make: command: Command not found make: command: Command not found In fact, Make has a table of shell-builtin commands because it must ask the shell to execute them. Until recently, 'command' was missing in the table. This issue was fixed by the following commit: | commit 1af314465e5dfe3e8baa839a32a72e83c04f26ef | Author: Paul Smith <psmith@gnu.org> | Date: Sun Nov 12 18:10:28 2017 -0500 | | * job.c: Add "command" as a known shell built-in. | | This is not a POSIX shell built-in but it's common in UNIX shells. | Reported by Nick Bowler <nbowler@draconx.ca>. Because the latest release is GNU Make 4.2.1 in 2016, this commit is not included in any released versions. (But some distributions may have back-ported it.) We need to trick Make to spawn a subshell. There are various ways to do so: 1) Use a shell special character '~' as dummy $(shell : ~; command -v $(c)gcc) 2) Use a variable reference that always expands to the empty string (suggested by David Laight) $(shell command$${x:+} -v $(c)gcc) 3) Use redirect $(shell command -v $(c)gcc 2>/dev/null) I chose 3) to not confuse people. The stderr would not be polluted anyway, but it will provide extra safety, and is easy to understand. Tested on Make 3.81, 3.82, 4.0, 4.1, 4.2, 4.2.1 [1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/command.html Fixes: bd55f96fa9fc ("kbuild: refactor cc-cross-prefix implementation") Cc: linux-stable <stable@vger.kernel.org> # 5.1 Reported-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> 07 June 2019, 15:38:47 UTC
0ab0d7a Vasily Gorbik 06 June 2019, 14:58:45 UTC s390/unwind: correct stack switching during unwind Adjust conditions in on_stack function. That fixes backchain unwinder which was unable to read pt_regs at the very bottom of the stack and hence couldn't follow stacks (e.g. from async stack to a task stack). Fixes: 78c98f907413 ("s390/unwind: introduce stack unwind API") Reported-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> 07 June 2019, 13:20:44 UTC
a964d23 Rafael J. Wysocki 07 June 2019, 08:48:57 UTC Merge branch 'pm-x86' * pm-x86: x86/power: Fix 'nosmt' vs hibernation triple fault during resume x86: intel_epb: Do not build when CONFIG_PM is unset 07 June 2019, 08:48:57 UTC
19e9da9 Angelo Ruocco 21 May 2019, 08:01:55 UTC block, bfq: add weight symlink to the bfq.weight cgroup parameter Many userspace tools and services use the proportional-share policy of the blkio/io cgroups controller. The CFQ I/O scheduler implemented this policy for the legacy block layer. To modify the weight of a group in case CFQ was in charge, the 'weight' parameter of the group must be modified. On the other hand, the BFQ I/O scheduler implements the same policy in blk-mq, but, with BFQ, the parameter to modify has a different name: bfq.weight (forced choice until legacy block was present, because two different policies cannot share a common parameter in cgroups). Due to CFQ legacy, most if not all userspace configurations still use the parameter 'weight', and for the moment do not seem likely to be changed. But, when CFQ went away with legacy block, such a parameter ceased to exist. So, a simple workaround has been proposed [1] to make all configurations work: add a symlink, named weight, to bfq.weight. This commit adds such a symlink. [1] https://lkml.org/lkml/2019/4/8/555 Suggested-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> 07 June 2019, 07:29:40 UTC
54b7b86 Angelo Ruocco 21 May 2019, 08:01:54 UTC cgroup: let a symlink too be created with a cftype file This commit enables a cftype to have a symlink (of any name) that points to the file associated with the cftype. Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> 07 June 2019, 07:29:39 UTC
671e2ee Dave Airlie 07 June 2019, 07:14:19 UTC Merge branch 'linux-5.2' of git://github.com/skeggsb/linux into drm-fixes " This is a bit more than I'd like to be pushing at this point in a cycle, but it's a fairly important issue. There's been numerous reports of more recent GP10[2467] boards failing to load, and I've worked with NVIDIA FW engineers and tracked this down to the FW we've been using not properly supporting the boards in question. I've pushed an update to linux-firmware with the new FW version, which unfortunately contains API changes vs the older firmware. This series teaches the ACR subsystem inside nouveau enough to be able to deal with supporting multiple incompatible FW revisions, and adds support to the relevant chipsets for loading the newer FW revision, if it's available." Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7pG+vur0Kn_TyU3ainnkvJVw07upnnaQNOToF+kzQtDQ@mail.gmail.com 07 June 2019, 07:16:00 UTC
ab4bec1 Ben Skeggs 06 June 2019, 06:28:35 UTC drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards Some newer boards with these chipsets aren't compatible with the prior version of the SEC2 FW, and fail to load as a result. This newer FW is actually the one we already use on >=GP108. Unfortunately, there are interface differences in GP108's FW, making it impossible to simply move files around in linux-firmware to solve this. We need to be able to keep compatibility with all linux-firmware/kernel combinations, which means supporting both firmwares. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 07 June 2019, 05:13:58 UTC
9352ce3 Ben Skeggs 06 June 2019, 06:32:31 UTC drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW Some chipsets will be switching to updated SEC2 LS firmware, so we need to plumb that through. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 07 June 2019, 05:13:58 UTC
5f0f8b5 Ben Skeggs 06 June 2019, 05:57:14 UTC drm/nouveau/secboot: split out FW version-specific LS function pointers It's not enough to have per-falcon structures anymore, we have multiple versions of some firmware now that have interface differences. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 07 June 2019, 05:13:58 UTC
c26f306 Ben Skeggs 06 June 2019, 05:38:25 UTC drm/nouveau/secboot: pass max supported FW version to LS load funcs Will be passed to the FW loader function as an upper bound on the supported FW version to attempt to load. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 07 June 2019, 05:13:58 UTC
475cf02 Ben Skeggs 22 May 2019, 06:15:54 UTC drm/nouveau/core: support versioned firmware loading We have a need for this now with updated SEC2 LS FW images that have an incompatible interface from the previous version. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 07 June 2019, 05:13:58 UTC
8854eed Ben Skeggs 06 June 2019, 07:08:12 UTC drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device It'd be nice to have FW loading debug messages to appear for the relevant subsystem, when enabled. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 07 June 2019, 05:13:58 UTC
c3e2219 Ming Lei 04 June 2019, 13:08:02 UTC block: free sched's request pool in blk_cleanup_queue In theory, IO scheduler belongs to request queue, and the request pool of sched tags belongs to the request queue too. However, the current tags allocation interfaces are re-used for both driver tags and sched tags, and driver tags is definitely host wide, and doesn't belong to any request queue, same with its request pool. So we need tagset instance for freeing request of sched tags. Meantime, blk_mq_free_tag_set() often follows blk_cleanup_queue() in case of non-BLK_MQ_F_TAG_SHARED, this way requires that request pool of sched tags to be freed before calling blk_mq_free_tag_set(). Commit 47cdee29ef9d94e ("block: move blk_exit_queue into __blk_release_queue") moves blk_exit_queue into __blk_release_queue for simplying the fast path in generic_make_request(), then causes oops during freeing requests of sched tags in __blk_release_queue(). Fix the above issue by move freeing request pool of sched tags into blk_cleanup_queue(), this way is safe becasue queue has been frozen and no any in-queue requests at that time. Freeing sched tags has to be kept in queue's release handler becasue there might be un-completed dispatch activity which might refer to sched tags. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Fixes: 47cdee29ef9d94e485eb08f962c74943023a5271 ("block: move blk_exit_queue into __blk_release_queue") Tested-by: Yi Zhang <yi.zhang@redhat.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 07 June 2019, 04:39:39 UTC
e659b41 Dave Airlie 07 June 2019, 00:41:32 UTC Merge tag 'drm-intel-fixes-2019-06-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Include gvt-fixes-2019-06-05 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190606120401.GA16071@jlahtine-desk.ger.corp.intel.com 07 June 2019, 00:41:33 UTC
bcc9d0e Dave Airlie 06 June 2019, 21:31:49 UTC Merge branch 'malidp-fixes' of git://linux-arm.org/linux-ld into drm-fixes Assorted set of patches for Arm DRM drivers that I maintain in my tree. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Liviu Dudau <Liviu.Dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190604144205.GO15316@e110455-lin.cambridge.arm.com 06 June 2019, 21:31:59 UTC
16d72dd Linus Torvalds 06 June 2019, 20:13:09 UTC Merge branch 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Fix crashes when accessing PCI devices on some machines like C240 and J5000. The crashes were triggered because we replaced cache flushes by nops in the alternative coding where we shouldn't for some machines. - Dave fixed a race in the usage of the sr1 space register when used to load the coherence index. - Use the hardware lpa instruction to to load the physical address of kernel virtual addresses in the iommu driver code. - The kernel may fail to link when CONFIG_MLONGCALLS isn't set. Solve that by rearranging functions in the final vmlinux executeable. - Some defconfig cleanups and removal of compiler warnings. * 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix crash due alternative coding for NP iopdir_fdc bit parisc: Use lpa instruction to load physical addresses in driver code parisc: configs: Remove useless UEVENT_HELPER_PATH parisc: Use implicit space register selection for loading the coherence index of I/O pdirs parisc: Fix compiler warnings in float emulation code parisc/slab: cleanup after /proc/slab_allocators removal parisc: Allow building 64-bit kernel without -mlong-calls compiler option parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK 06 June 2019, 20:13:09 UTC
ae87660 Linus Torvalds 06 June 2019, 20:10:49 UTC Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a regression that breaks the jitterentropy RNG and a potential memory leak in hmac" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hmac - fix memory leak in hmac_init_tfm() crypto: jitterentropy - change back to module_init() 06 June 2019, 20:10:49 UTC
0104763 Linus Torvalds 06 June 2019, 19:36:54 UTC Merge tag 'xfs-5.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fixes from Darrick Wong: "Here are a couple more bug fixes for 5.2. Changes since last update: - Fix some forgotten strings in a log debugging function - Fix incorrect unit conversion in online fsck code" * tag 'xfs-5.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: inode btree scrubber should calculate im_boffset correctly xfs: fix broken log reservation debugging 06 June 2019, 19:36:54 UTC
dc8ca9c Linus Torvalds 06 June 2019, 19:33:52 UTC Merge tag 'gfs2-v5.2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: "A revert for a patch that turned out to be broken" * tag 'gfs2-v5.2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: Revert "gfs2: Replace gl_revokes with a GLF flag" 06 June 2019, 19:33:52 UTC
5d6b501 Linus Torvalds 06 June 2019, 19:31:15 UTC Merge tag 'ovl-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "Here's one fix for a class of bugs triggered by syzcaller, and one that makes xfstests fail less" * tag 'ovl-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: doc: add non-standard corner cases ovl: detect overlapping layers ovl: support the FS_IOC_FS[SG]ETXATTR ioctls 06 June 2019, 19:31:15 UTC
2117585 Linus Torvalds 06 June 2019, 19:25:56 UTC Merge tag 'fuse-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "This fixes a leaked inode lock in an error cleanup path and a data consistency issue with copy_file_range(). It also adds a new flag for the WRITE request that allows userspace filesystems to clear suid/sgid bits on the file if necessary" * tag 'fuse-fixes-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: extract helper for range writeback fuse: fix copy_file_range() in the writeback case fuse: add FUSE_WRITE_KILL_PRIV fuse: fallocate: fix return with locked inode 06 June 2019, 19:25:56 UTC
459aa07 Linus Torvalds 06 June 2019, 19:19:37 UTC Merge tag 'nfs-for-5.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client fixes from Anna Schumaker: "These are mostly stable bugfixes found during testing, many during the recent NFS bake-a-thon. Stable bugfixes: - SUNRPC: Fix regression in umount of a secure mount - SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential - NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter - NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled Other bugfixes: - xprtrdma: Use struct_size() in kzalloc()" * tag 'nfs-for-5.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential SUNRPC fix regression in umount of a secure mount xprtrdma: Use struct_size() in kzalloc() 06 June 2019, 19:19:37 UTC
720f1de Paolo Abeni 06 June 2019, 13:45:03 UTC pktgen: do not sleep with the thread lock held. Currently, the process issuing a "start" command on the pktgen procfs interface, acquires the pktgen thread lock and never release it, until all pktgen threads are completed. The above can blocks indefinitely any other pktgen command and any (even unrelated) netdevice removal - as the pktgen netdev notifier acquires the same lock. The issue is demonstrated by the following script, reported by Matteo: ip -b - <<'EOF' link add type dummy link add type veth link set dummy0 up EOF modprobe pktgen echo reset >/proc/net/pktgen/pgctrl { echo rem_device_all echo add_device dummy0 } >/proc/net/pktgen/kpktgend_0 echo count 0 >/proc/net/pktgen/dummy0 echo start >/proc/net/pktgen/pgctrl & sleep 1 rmmod veth Fix the above releasing the thread lock around the sleep call. Additionally we must prevent racing with forcefull rmmod - as the thread lock no more protects from them. Instead, acquire a self-reference before waiting for any thread. As a side effect, running rmmod pktgen while some thread is running now fails with "module in use" error, before this patch such command hanged indefinitely. Note: the issue predates the commit reported in the fixes tag, but this fix can't be applied before the mentioned commit. v1 -> v2: - no need to check for thread existence after flipping the lock, pktgen threads are freed only at net exit time - Fixes: 6146e6a43b35 ("[PKTGEN]: Removes thread_{un,}lock() macros.") Reported-and-tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 18:31:35 UTC
44e843e Linus Torvalds 06 June 2019, 18:02:54 UTC Merge tag 'for-rc-adfs' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ADFS cleanups/fixes from Russell King: "As a result of some of Al Viro's great work, here are a few cleanups with fixes for adfs: - factor out filename comparison, so we can be sure that adfs_compare() (used for namei compare) and adfs_match() (used for lookup) have the same behaviour. - factor out filename lowering (which is not the same as tolower() which will lower top-bit-set characters) to ensure that we have the same behaviour when comparing filenames as when we hash them. - factor out the object fixups, so we are applying all fixups to directory objects in the same way, independent of the disk format. - factor out the object name fixup (into the previously factored out function) to ensure that filenames are appropriately translated - for example, adfs allows '/' in filenames, which being the Unix path separator, need to be translated to a different character, which is normally '.' (DOS 8.3 filenames represent the . as a / on adfs, so this is the expected reverse translation.) - remove filename truncation; Al asked about this and apparently the decision is to remove it. In any case, adfs's truncation was buggy, so this rids us of that bug by removing the truncation feature. - we now have only one location which adds the "filetype" suffix to the filename, so there's no point that code being out of line. - since we translate '/' into '.', an adfs filename of "/" or "//" would end up being translated to "." and ".." which have special meanings. In this case, change the first character to "^" to avoid these special directory names being abused" * tag 'for-rc-adfs' of git://git.armlinux.org.uk/~rmk/linux-arm: fs/adfs: fix filename fixup handling for "/" and "//" names fs/adfs: move append_filetype_suffix() into adfs_object_fixup() fs/adfs: remove truncated filename hashing fs/adfs: factor out filename fixup fs/adfs: factor out object fixups fs/adfs: factor out filename case lowering fs/adfs: factor out filename comparison 06 June 2019, 18:02:54 UTC
d37acd5 Maxime Chevallier 06 June 2019, 08:42:56 UTC net: mvpp2: Use strscpy to handle stat strings Use a safe strscpy call to copy the ethtool stat strings into the relevant buffers, instead of a memcpy that will be accessing out-of-bound data. Fixes: 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 17:38:42 UTC
85cb928 Zhu Yanjun 06 June 2019, 08:00:03 UTC net: rds: fix memory leak in rds_ib_flush_mr_pool When the following tests last for several hours, the problem will occur. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M -T 30 The following will occur. " Starting up.... tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 " >From vmcore, we can find that clean_list is NULL. >From the source code, rds_mr_flushd calls rds_ib_mr_pool_flush_worker. Then rds_ib_mr_pool_flush_worker calls " rds_ib_flush_mr_pool(pool, 0, NULL); " Then in function " int rds_ib_flush_mr_pool(struct rds_ib_mr_pool *pool, int free_all, struct rds_ib_mr **ibmr_ret) " ibmr_ret is NULL. In the source code, " ... list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail); if (ibmr_ret) *ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode); /* more than one entry in llist nodes */ if (clean_nodes->next) llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list); ... " When ibmr_ret is NULL, llist_entry is not executed. clean_nodes->next instead of clean_nodes is added in clean_list. So clean_nodes is discarded. It can not be used again. The workqueue is executed periodically. So more and more clean_nodes are discarded. Finally the clean_list is NULL. Then this problem will occur. Fixes: 1bc144b62524 ("net, rds, Replace xlist in net/rds/xlist.h with llist") Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 17:32:16 UTC
8d037f9 David S. Miller 06 June 2019, 17:29:21 UTC Merge branch 'ipv6-fix-EFAULT-on-sendto-with-icmpv6-and-hdrincl' Olivier Matz says: ==================== ipv6: fix EFAULT on sendto with icmpv6 and hdrincl The following code returns EFAULT (Bad address): s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6); setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1); sendto(ipv6_icmp6_packet, addr); /* returns -1, errno = EFAULT */ The problem is fixed in the second patch. The first one aligns the code to ipv4, to avoid a race condition in the second patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 17:29:21 UTC
b9aa52c Olivier Matz 06 June 2019, 07:15:19 UTC ipv6: fix EFAULT on sendto with icmpv6 and hdrincl The following code returns EFAULT (Bad address): s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6); setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1); sendto(ipv6_icmp6_packet, addr); /* returns -1, errno = EFAULT */ The IPv4 equivalent code works. A workaround is to use IPPROTO_RAW instead of IPPROTO_ICMPV6. The failure happens because 2 bytes are eaten from the msghdr by rawv6_probe_proto_opt() starting from commit 19e3c66b52ca ("ipv6 equivalent of "ipv4: Avoid reading user iov twice after raw_probe_proto_opt""), but at that time it was not a problem because IPV6_HDRINCL was not yet introduced. Only eat these 2 bytes if hdrincl == 0. Fixes: 715f504b1189 ("ipv6: add IPV6_HDRINCL option for raw sockets") Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 17:29:21 UTC
59e3e4b Olivier Matz 06 June 2019, 07:15:18 UTC ipv6: use READ_ONCE() for inet->hdrincl as in ipv4 As it was done in commit 8f659a03a0ba ("net: ipv4: fix for a race condition in raw_sendmsg") and commit 20b50d79974e ("net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()") for ipv4, copy the value of inet->hdrincl in a local variable, to avoid introducing a race condition in the next commit. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 17:29:21 UTC
62f99b6 Max Gurtovoy 06 June 2019, 09:27:36 UTC nvme-rdma: use dynamic dma mapping per command Commit 87fd125344d6 ("nvme-rdma: remove redundant reference between ib_device and tagset") caused a kernel panic when disconnecting from an inaccessible controller (disconnect during re-connection). -- nvme nvme0: Removing ctrl: NQN "testnqn1" nvme_rdma: nvme_rdma_exit_request: hctx 0 queue_idx 1 BUG: unable to handle kernel paging request at 0000000080000228 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI ... Call Trace: blk_mq_exit_hctx+0x5c/0xf0 blk_mq_exit_queue+0xd4/0x100 blk_cleanup_queue+0x9a/0xc0 nvme_rdma_destroy_io_queues+0x52/0x60 [nvme_rdma] nvme_rdma_shutdown_ctrl+0x3e/0x80 [nvme_rdma] nvme_do_delete_ctrl+0x53/0x80 [nvme_core] nvme_sysfs_delete+0x45/0x60 [nvme_core] kernfs_fop_write+0x105/0x180 vfs_write+0xad/0x1a0 ksys_write+0x5a/0xd0 do_syscall_64+0x55/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa215417154 -- The reason for this crash is accessing an already freed ib_device for performing dma_unmap during exit_request commands. The root cause for that is that during re-connection all the queues are destroyed and re-created (and the ib_device is reference counted by the queues and freed as well) but the tagset stays alive and all the DMA mappings (that we perform in init_request) kept in the request context. The original commit fixed a different bug that was introduced during bonding (aka nic teaming) tests that for some scenarios change the underlying ib_device and caused memory leakage and possible segmentation fault. This commit is a complementary commit that also changes the wrong DMA mappings that were saved in the request context and making the request sqe dma mappings dynamic with the command lifetime (i.e. mapped in .queue_rq and unmapped in .complete). It also fixes the above crash of accessing freed ib_device during destruction of the tagset. Fixes: 87fd125344d6 ("nvme-rdma: remove redundant reference between ib_device and tagset") Reported-by: Jim Harris <james.r.harris@intel.com> Suggested-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> 06 June 2019, 16:53:19 UTC
c8e8c77 Jaesoo Lee 03 June 2019, 23:42:28 UTC nvme: Fix u32 overflow in the number of namespace list calculation The Number of Namespaces (nn) field in the identify controller data structure is defined as u32 and the maximum allowed value in NVMe specification is 0xFFFFFFFEUL. This change fixes the possible overflow of the DIV_ROUND_UP() operation used in nvme_scan_ns_list() by casting the nn to u64. Signed-off-by: Jaesoo Lee <jalee@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> 06 June 2019, 16:53:07 UTC
638803d Bob Peterson 06 June 2019, 12:33:38 UTC Revert "gfs2: Replace gl_revokes with a GLF flag" Commit 73118ca8baf7 introduced a glock reference counting bug in gfs2_trans_remove_revoke. Given that, replacing gl_revokes with a GLF flag is no longer useful, so revert that commit. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> 06 June 2019, 14:29:26 UTC
e7bf2ce Greg Kroah-Hartman 06 June 2019, 13:13:22 UTC Merge tag 'misc-habanalabs-fixes-2019-06-06' of git://people.freedesktop.org/~gabbayo/linux into char-misc-linus Oded writes: This tag contains the following fixes: - Fix the code that checks whether we can use 2MB page size when mapping memory in the ASIC's MMU. The current code had a "hole" which happened in architectures other then x86-64. - Fix the debugfs interface to read/write from/to the device using device virtual addresses. There was a bug in the translation regarding addresses that were mapped using 2MB page size. - Fix a bug in the debug/profiling code, where the code didn't read the full address but only the lower 32-bits of the address. * tag 'misc-habanalabs-fixes-2019-06-06' of git://people.freedesktop.org/~gabbayo/linux: habanalabs: Read upper bits of trace buffer from RWPHI habanalabs: Fix virtual address access via debugfs for 2MB pages habanalabs: fix bug in checking huge page optimization 06 June 2019, 13:13:22 UTC
ebcc592 Dave Martin 06 June 2019, 10:33:43 UTC arm64: Silence gcc warnings about arch ABI drift Since GCC 9, the compiler warns about evolution of the platform-specific ABI, in particular relating for the marshaling of certain structures involving bitfields. The kernel is a standalone binary, and of course nobody would be so stupid as to expose structs containing bitfields as function arguments in ABI. (Passing a pointer to such a struct, however inadvisable, should be unaffected by this change. perf and various drivers rely on that.) So these warnings do more harm than good: turn them off. We may miss warnings about future ABI drift, but that's too bad. Future ABI breaks of this class will have to be debugged and fixed the traditional way unless the compiler evolves finer-grained diagnostics. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> 06 June 2019, 12:28:45 UTC
527a1d1 Helge Deller 27 May 2019, 19:20:00 UTC parisc: Fix crash due alternative coding for NP iopdir_fdc bit According to the found documentation, data cache flushes and sync instructions are needed on the PCX-U+ (PA8200, e.g. C200/C240) platforms, while PCX-W (PA8500, e.g. C360) platforms aparently don't need those flushes when changing the IO PDIR data structures. We have no documentation for PCX-W+ (PA8600) and PCX-W2 (PA8700) CPUs, but Carlo Pisani reported that his C3600 machine (PA8600, PCX-W+) fails when the fdc instructions were removed. His firmware didn't set the NIOP bit, so one may assume it's a firmware bug since other C3750 machines had the bit set. Even if documentation (as mentioned above) states that PCX-W (PA8500, e.g. J5000) does not need fdc flushes, Sven could show that an Adaptec 29320A PCI-X SCSI controller reliably failed on a dd command during the first five minutes in his J5000 when fdc flushes were missing. Going forward, we will now NOT replace the fdc and sync assembler instructions by NOPS if: a) the NP iopdir_fdc bit was set by firmware, or b) we find a CPU up to and including a PCX-W+ (PA8600). This fixes the HPMC crashes on a C240 and C36XX machines. For other machines we rely on the firmware to set the bit when needed. In case one finds HPMC issues, people could try to boot their machines with the "no-alternatives" kernel option to turn off any alternative patching. Reported-by: Sven Schnelle <svens@stackframe.org> Reported-by: Carlo Pisani <carlojpisani@gmail.com> Tested-by: Sven Schnelle <svens@stackframe.org> Fixes: 3847dab77421 ("parisc: Add alternative coding infrastructure") Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 5.0+ 06 June 2019, 12:25:22 UTC
116d753 John David Anglin 02 June 2019, 23:12:40 UTC parisc: Use lpa instruction to load physical addresses in driver code Most I/O in the kernel is done using the kernel offset mapping. However, there is one API that uses aliased kernel address ranges: > The final category of APIs is for I/O to deliberately aliased address > ranges inside the kernel. Such aliases are set up by use of the > vmap/vmalloc API. Since kernel I/O goes via physical pages, the I/O > subsystem assumes that the user mapping and kernel offset mapping are > the only aliases. This isn't true for vmap aliases, so anything in > the kernel trying to do I/O to vmap areas must manually manage > coherency. It must do this by flushing the vmap range before doing > I/O and invalidating it after the I/O returns. For this reason, we should use the hardware lpa instruction to load the physical address of kernel virtual addresses in the driver code. I believe we only use the vmap/vmalloc API with old PA 1.x processors which don't have a sba, so we don't hit this problem. Tested on c3750, c8000 and rp3440. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> 06 June 2019, 12:12:22 UTC
ec13c82 Krzysztof Kozlowski 04 June 2019, 07:57:39 UTC parisc: configs: Remove useless UEVENT_HELPER_PATH Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Helge Deller <deller@gmx.de> 06 June 2019, 12:12:20 UTC
63923d2 John David Anglin 28 May 2019, 00:15:14 UTC parisc: Use implicit space register selection for loading the coherence index of I/O pdirs We only support I/O to kernel space. Using %sr1 to load the coherence index may be racy unless interrupts are disabled. This patch changes the code used to load the coherence index to use implicit space register selection. This saves one instruction and eliminates the race. Tested on rp3440, c8000 and c3750. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> 06 June 2019, 12:12:18 UTC
2b55d83 George G. Davis 05 June 2019, 20:30:09 UTC ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix Fix a s/TIF_SECOMP/TIF_SECCOMP/ comment typo Cc: Jiri Kosina <trivial@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Will Deacon <will.deacon@arm.com> 06 June 2019, 09:40:05 UTC
6d10dc6 Dan Carpenter 03 May 2019, 12:25:25 UTC drm/komeda: Potential error pointer dereference We need to check whether drm_atomic_get_crtc_state() returns an error pointer before dereferencing "crtc_st". Fixes: 9e5603094176 ("drm/komeda: Add komeda_plane/plane_helper_funcs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: "james qian wang (Arm Technology China)" <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> 06 June 2019, 08:00:29 UTC
7cb8bec YueHaibing 26 April 2019, 16:42:02 UTC drm/komeda: remove set but not used variable 'kcrtc' Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/arm/display/komeda/komeda_plane.c: In function komeda_plane_atomic_check: drivers/gpu/drm/arm/display/komeda/komeda_plane.c:49:22: warning: variable kcrtc set but not used [-Wunused-but-set-variable] It is never used since introduction in commit 9e5603094176 ("drm/komeda: Add komeda_plane/plane_helper_funcs") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> 06 June 2019, 07:59:41 UTC
dbd9f78 Dave Airlie 06 June 2019, 01:56:00 UTC Merge tag 'drm-misc-fixes-2019-06-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - Allow fb changes in async commits (fixes igt failures) (Helen) - Actually unmap the scatterlist when unmapping udmabuf (Lucas) Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Helen Koike <helen.koike@collabora.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190605210335.GA35431@art_vandelay 06 June 2019, 01:57:13 UTC
75cb377 Dave Airlie 06 June 2019, 01:53:13 UTC Merge branch 'drm-fixes-5.2' of git://people.freedesktop.org/~agd5f/linux into drm-fixes - A fix to make VCE resume more reliable - Updates for new raven variants Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190605182332.4073-1-alexander.deucher@amd.com 06 June 2019, 01:53:36 UTC
351212f Dave Airlie 06 June 2019, 01:46:08 UTC Merge tag 'drm-intel-fixes-2019-06-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Add missing Icelake W/A to disable GPU hang on cache ECC error - GVT a fix for recently seen arbitrary DMA map fault and more enforcement fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603132928.GA4866@jlahtine-desk.ger.corp.intel.com 06 June 2019, 01:49:04 UTC
4a60570 Robert Hancock 05 June 2019, 19:49:00 UTC hwmon: (pmbus/core) Treat parameters as paged if on multiple pages Some chips have attributes which exist on more than one page but the attribute is not presently marked as paged. This causes the attributes to be generated with the same label, which makes it impossible for userspace to tell them apart. Marking all such attributes as paged would result in the page suffix being added regardless of whether they were present on more than one page or not, which might break existing setups. Therefore, we add a second check which treats the attribute as paged, even if not marked as such, if it is present on multiple pages. Fixes: b4ce237b7f7d ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 06 June 2019, 01:36:27 UTC
3846372 Adamski, Krzysztof (Nokia - PL/Wroclaw) 29 May 2019, 14:33:52 UTC hwmon: (pmbus/core) mutex_lock write in pmbus_set_samples update_lock is a mutex intended to protect write operations. It was not taken, however, when _pmbus_write_word_data is called from pmbus_set_samples() function which may cause problems especially when some PMBUS_VIRT_* operation is implemented as a read-modify-write cycle. This patch makes sure the lock is held during the operation. Fixes: 49c4455dccf2 ("hwmon: (pmbus) Introduce PMBUS_VIRT_*_SAMPLES registers") Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> [groeck: Declared and initialized missing 'data' variable] Signed-off-by: Guenter Roeck <linux@roeck-us.net> 06 June 2019, 01:36:27 UTC
c41dd48 Eduardo Valentin 30 May 2019, 02:56:04 UTC hwmon: (core) add thermal sensors only if dev->of_node is present Drivers may register to hwmon and request for also registering with the thermal subsystem (HWMON_C_REGISTER_TZ). However, some of these driver, e.g. marvell phy, may be probed from Device Tree or being dynamically allocated, and in the later case, it will not have a dev->of_node entry. Registering with hwmon without the dev->of_node may result in different outcomes depending on the device tree, which may be a bit misleading. If the device tree blob has no 'thermal-zones' node, the *hwmon_device_register*() family functions are going to gracefully succeed, because of-thermal, *thermal_zone_of_sensor_register() return -ENODEV in this case, and the hwmon error path handles this error code as success to cover for the case where CONFIG_THERMAL_OF is not set. However, if the device tree blob has the 'thermal-zones' entry, the *hwmon_device_register*() will always fail on callers with no dev->of_node, propagating -EINVAL. If dev->of_node is not present, calling of-thermal does not make sense. For this reason, this patch checks first if the device has a of_node before going over the process of registering with the thermal subsystem of-thermal interface. And in this case, when a caller of *hwmon_device_register*() with HWMON_C_REGISTER_TZ and no dev->of_node will still register with hwmon, but not with the thermal subsystem. If all the hwmon part bits are in place, the registration will succeed. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduval@amazon.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 06 June 2019, 01:36:27 UTC
4970b42 Hangbin Liu 05 June 2019, 04:27:14 UTC Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied" This reverts commit e9919a24d3022f72bcadc407e73a6ef17093a849. Nathan reported the new behaviour breaks Android, as Android just add new rules and delete old ones. If we return 0 without adding dup rules, Android will remove the new added rules and causing system to soft-reboot. Fixes: e9919a24d302 ("fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reported-by: Yaro Slav <yaro330@gmail.com> Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 00:54:46 UTC
930b9a0 Nikita Danilov 04 June 2019, 13:23:49 UTC net: aquantia: fix wol configuration not applied sometimes WoL magic packet configuration sometimes does not work due to couple of leakages found. Mainly there was a regression introduced during readx_poll refactoring. Next, fw request waiting time was too small. Sometimes that caused sleep proxy config function to return with an error and to skip WoL configuration. At last, WoL data were passed to FW from not clean buffer. That could cause FW to accept garbage as a random configuration data. Fixes: 6a7f2277313b ("net: aquantia: replace AQ_HW_WAIT_FOR with readx_poll_timeout_atomic") Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 00:39:43 UTC
0ee4e76 Vivien Didelot 03 June 2019, 20:57:13 UTC ethtool: fix potential userspace buffer overflow ethtool_get_regs() allocates a buffer of size ops->get_regs_len(), and pass it to the kernel driver via ops->get_regs() for filling. There is no restriction about what the kernel drivers can or cannot do with the open ethtool_regs structure. They usually set regs->version and ignore regs->len or set it to the same size as ops->get_regs_len(). But if userspace allocates a smaller buffer for the registers dump, we would cause a userspace buffer overflow in the final copy_to_user() call, which uses the regs.len value potentially reset by the driver. To fix this, make this case obvious and store regs.len before calling ops->get_regs(), to only copy as much data as requested by userspace, up to the value returned by ops->get_regs_len(). While at it, remove the redundant check for non-null regbuf. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 00:15:27 UTC
0a8dd9f Neil Horman 03 June 2019, 20:32:59 UTC Fix memory leak in sctp_process_init syzbot found the following leak in sctp_process_init BUG: memory leak unreferenced object 0xffff88810ef68400 (size 1024): comm "syz-executor273", pid 7046, jiffies 4294945598 (age 28.770s) hex dump (first 32 bytes): 1d de 28 8d de 0b 1b e3 b5 c2 f9 68 fd 1a 97 25 ..(........h...% 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a02cebbd>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<00000000a02cebbd>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000a02cebbd>] slab_alloc mm/slab.c:3326 [inline] [<00000000a02cebbd>] __do_kmalloc mm/slab.c:3658 [inline] [<00000000a02cebbd>] __kmalloc_track_caller+0x15d/0x2c0 mm/slab.c:3675 [<000000009e6245e6>] kmemdup+0x27/0x60 mm/util.c:119 [<00000000dfdc5d2d>] kmemdup include/linux/string.h:432 [inline] [<00000000dfdc5d2d>] sctp_process_init+0xa7e/0xc20 net/sctp/sm_make_chunk.c:2437 [<00000000b58b62f8>] sctp_cmd_process_init net/sctp/sm_sideeffect.c:682 [inline] [<00000000b58b62f8>] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1384 [inline] [<00000000b58b62f8>] sctp_side_effects net/sctp/sm_sideeffect.c:1194 [inline] [<00000000b58b62f8>] sctp_do_sm+0xbdc/0x1d60 net/sctp/sm_sideeffect.c:1165 [<0000000044e11f96>] sctp_assoc_bh_rcv+0x13c/0x200 net/sctp/associola.c:1074 [<00000000ec43804d>] sctp_inq_push+0x7f/0xb0 net/sctp/inqueue.c:95 [<00000000726aa954>] sctp_backlog_rcv+0x5e/0x2a0 net/sctp/input.c:354 [<00000000d9e249a8>] sk_backlog_rcv include/net/sock.h:950 [inline] [<00000000d9e249a8>] __release_sock+0xab/0x110 net/core/sock.c:2418 [<00000000acae44fa>] release_sock+0x37/0xd0 net/core/sock.c:2934 [<00000000963cc9ae>] sctp_sendmsg+0x2c0/0x990 net/sctp/socket.c:2122 [<00000000a7fc7565>] inet_sendmsg+0x64/0x120 net/ipv4/af_inet.c:802 [<00000000b732cbd3>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000b732cbd3>] sock_sendmsg+0x54/0x70 net/socket.c:671 [<00000000274c57ab>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2292 [<000000008252aedb>] __sys_sendmsg+0x80/0xf0 net/socket.c:2330 [<00000000f7bf23d1>] __do_sys_sendmsg net/socket.c:2339 [inline] [<00000000f7bf23d1>] __se_sys_sendmsg net/socket.c:2337 [inline] [<00000000f7bf23d1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2337 [<00000000a8b4131f>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:3 The problem was that the peer.cookie value points to an skb allocated area on the first pass through this function, at which point it is overwritten with a heap allocated value, but in certain cases, where a COOKIE_ECHO chunk is included in the packet, a second pass through sctp_process_init is made, where the cookie value is re-allocated, leaking the first allocation. Fix is to always allocate the cookie value, and free it when we are done using it. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 00:11:47 UTC
b50e058 Zhu Yanjun 03 June 2019, 12:48:19 UTC net: rds: fix memory leak when unload rds_rdma When KASAN is enabled, after several rds connections are created, then "rmmod rds_rdma" is run. The following will appear. " BUG rds_ib_incoming (Not tainted): Objects remaining in rds_ib_incoming on __kmem_cache_shutdown() Call Trace: dump_stack+0x71/0xab slab_err+0xad/0xd0 __kmem_cache_shutdown+0x17d/0x370 shutdown_cache+0x17/0x130 kmem_cache_destroy+0x1df/0x210 rds_ib_recv_exit+0x11/0x20 [rds_rdma] rds_ib_exit+0x7a/0x90 [rds_rdma] __x64_sys_delete_module+0x224/0x2c0 ? __ia32_sys_delete_module+0x2c0/0x2c0 do_syscall_64+0x73/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 " This is rds connection memory leak. The root cause is: When "rmmod rds_rdma" is run, rds_ib_remove_one will call rds_ib_dev_shutdown to drop the rds connections. rds_ib_dev_shutdown will call rds_conn_drop to drop rds connections as below. " rds_conn_path_drop(&conn->c_path[0], false); " In the above, destroy is set to false. void rds_conn_path_drop(struct rds_conn_path *cp, bool destroy) { atomic_set(&cp->cp_state, RDS_CONN_ERROR); rcu_read_lock(); if (!destroy && rds_destroy_pending(cp->cp_conn)) { rcu_read_unlock(); return; } queue_work(rds_wq, &cp->cp_down_w); rcu_read_unlock(); } In the above function, destroy is set to false. rds_destroy_pending is called. This does not move rds connections to ib_nodev_conns. So destroy is set to true to move rds connections to ib_nodev_conns. In rds_ib_unregister_client, flush_workqueue is called to make rds_wq finsh shutdown rds connections. The function rds_ib_destroy_nodev_conns is called to shutdown rds connections finally. Then rds_ib_recv_exit is called to destroy slab. void rds_ib_recv_exit(void) { kmem_cache_destroy(rds_ib_incoming_slab); kmem_cache_destroy(rds_ib_frag_slab); } The above slab memory leak will not occur again. >From tests, 256 rds connections [root@ca-dev14 ~]# time rmmod rds_rdma real 0m16.522s user 0m0.000s sys 0m8.152s 512 rds connections [root@ca-dev14 ~]# time rmmod rds_rdma real 0m32.054s user 0m0.000s sys 0m15.568s To rmmod rds_rdma with 256 rds connections, about 16 seconds are needed. And with 512 rds connections, about 32 seconds are needed. >From ftrace, when one rds connection is destroyed, " 19) | rds_conn_destroy [rds]() { 19) 7.782 us | rds_conn_path_drop [rds](); 15) | rds_shutdown_worker [rds]() { 15) | rds_conn_shutdown [rds]() { 15) 1.651 us | rds_send_path_reset [rds](); 15) 7.195 us | } 15) + 11.434 us | } 19) 2.285 us | rds_cong_remove_conn [rds](); 19) * 24062.76 us | } " So if many rds connections will be destroyed, this function rds_ib_destroy_nodev_conns uses most of time. Suggested-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 00:08:14 UTC
b7999b0 Xin Long 02 June 2019, 11:10:46 UTC ipv6: fix the check before getting the cookie in rt6_get_cookie In Jianlin's testing, netperf was broken with 'Connection reset by peer', as the cookie check failed in rt6_check() and ip6_dst_check() always returned NULL. It's caused by Commit 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes"), where the cookie can be got only when 'c1'(see below) for setting dst_cookie whereas rt6_check() is called when !'c1' for checking dst_cookie, as we can see in ip6_dst_check(). Since in ip6_dst_check() both rt6_dst_from_check() (c1) and rt6_check() (!c1) will check the 'from' cookie, this patch is to remove the c1 check in rt6_get_cookie(), so that the dst_cookie can always be set properly. c1: (rt->rt6i_flags & RTF_PCPU || unlikely(!list_empty(&rt->rt6i_uncached))) Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 June 2019, 00:00:29 UTC
0a90478 Xin Long 02 June 2019, 11:10:24 UTC ipv4: not do cache for local delivery if bc_forwarding is enabled With the topo: h1 ---| rp1 | | route rp3 |--- h3 (192.168.200.1) h2 ---| rp2 | If rp1 bc_forwarding is set while rp2 bc_forwarding is not, after doing "ping 192.168.200.255" on h1, then ping 192.168.200.255 on h2, and the packets can still be forwared. This issue was caused by the input route cache. It should only do the cache for either bc forwarding or local delivery. Otherwise, local delivery can use the route cache for bc forwarding of other interfaces. This patch is to fix it by not doing cache for local delivery if all.bc_forwarding is enabled. Note that we don't fix it by checking route cache local flag after rt_cache_valid() in "local_input:" and "ip_mkroute_input", as the common route code shouldn't be touched for bc_forwarding. Fixes: 5cbf777cfdf6 ("route: add support for directed broadcast forwarding") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2019, 23:59:21 UTC
e2e8832 Shuah Khan 05 June 2019, 21:16:00 UTC selftests: vm: Fix test build failure when built by itself vm test build fails when test is built by itself using make -C tools/testing/selftests/vm or cd tools/testing/selftests/vm; make When the test is built invoking its Makefile directly, it defines OUTPUT which conflicts with lib.mk's logic to install headers. make --no-builtin-rules INSTALL_HDR_PATH=$OUTPUT/usr \ ARCH=x86 -C ../../../.. headers_install make[1]: Entering directory '/mnt/data/lkml/linux_5.2' REMOVE shmparam.h rm: cannot remove '/usr/include/asm-generic/shmparam.h': Permission denied scripts/Makefile.headersinst:96: recipe for target '/usr/include/asm-generic/.install' failed make[3]: *** [/usr/include/asm-generic/.install] Error 1 scripts/Makefile.headersinst:32: recipe for target 'asm-generic' failed make[2]: *** [asm-generic] Error 2 Makefile:1199: recipe for target 'headers_install' failed make[1]: *** [headers_install] Error 2 make[1]: Leaving directory '/mnt/data/lkml/linux_5.2' ../lib.mk:52: recipe for target 'khdr' failed make: *** [khdr] Error 2 Fixes: 8ce72dc32578 ("selftests: fix headers_install circular dependency") Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> 05 June 2019, 22:05:40 UTC
156c059 Linus Torvalds 05 June 2019, 20:09:55 UTC Merge tag 'linux-kselftest-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - fixes to cgroup tests (Alex Shi) - fix to userfaultfd compiler warning (Alakesh Haloi) - fix to vm install to include test script to run the test (Naresh Kamboju) * tag 'linux-kselftest-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: vm: install test_vmalloc.sh for run_vmtests userfaultfd: selftest: fix compiler warning kselftest/cgroup: fix incorrect test_core skip kselftest/cgroup: fix unexpected testing failure on test_core kselftest/cgroup: fix unexpected testing failure on test_memcontrol 05 June 2019, 20:09:55 UTC
db309f2 Linus Torvalds 05 June 2019, 20:03:36 UTC Merge tag 'pidfd-fixes-v5.2-rc4' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux Pull pidfd fixes from Christian Brauner: "The contains two small patches to the pidfd samples and test binaries respectively. They were lacking appropriate ifdefines for __NR_pidfd_send_signal and could hence lead to compilation errors when that was not defined. This was spotted on mips independently by Guenter Roeck (who was kind enough to send a fix for the samples binary) and Arnd who spotted it in linux-next. Apart from these two patches, there's also a patch to update the comments for the pidfd_send_signal() syscall which were slightly wrong/inconsistenly worded" * tag 'pidfd-fixes-v5.2-rc4' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux: tests: fix pidfd-test compilation signal: improve comments samples: fix pidfd-metadata compilation 05 June 2019, 20:03:36 UTC
47358b6 Linus Torvalds 05 June 2019, 19:42:26 UTC Merge tag 'pstore-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fixes from Kees Cook: - Avoid NULL deref when unloading/reloading ramoops module (Pi-Hsun Shih) - Run ramoops without crash dump region * tag 'pstore-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Run without kernel crash dump region pstore: Set tfm to NULL on free_buf_for_compression 05 June 2019, 19:42:26 UTC
cf1db7f Christoph Hellwig 05 June 2019, 19:08:27 UTC mmc: also set max_segment_size in the device If we only set the max_segment_size on the queue an IOMMU merge might create bigger segments again, so limit the IOMMU merges as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 05 June 2019, 19:18:39 UTC
bb6f59a Christoph Hellwig 05 June 2019, 19:08:26 UTC mtip32xx: also set max_segment_size in the device If we only set the max_segment_size on the queue an IOMMU merge might create bigger segments again, so limit the IOMMU merges as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 05 June 2019, 19:18:39 UTC
84f3fc7 Christoph Hellwig 05 June 2019, 19:08:25 UTC rsxx: don't call dma_set_max_seg_size This driver does never uses dma_map_sg, so the setting is rather pointless. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 05 June 2019, 19:18:39 UTC
a48bc52 Christoph Hellwig 05 June 2019, 19:08:24 UTC nvme-pci: don't limit DMA segement size NVMe uses PRPs (or optionally unlimited SGLs) for data transfers and has no specific limit for a single DMA segement. Limiting the size will cause problems because the block layer assumes PRP-ish devices using a virt boundary mask don't have a segment limit. And while this is true, we also really need to tell the DMA mapping layer about it, otherwise dma-debug will trip over it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 05 June 2019, 19:18:39 UTC
e7a9fe7 David S. Miller 05 June 2019, 18:48:57 UTC Merge branch 's390-qeth-fixes' Julian Wiedmann says: ==================== s390/qeth: fixes 2019-06-05 one more shot... now with patch 2 fixed up so that it uses the dst entry returned from dst_check(). From the v1 cover letter: Please apply the following set of qeth fixes to -net. - The first two patches fix issues in the L3 driver's cast type selection for transmitted skbs. - Alexandra adds a sanity check when retrieving VLAN information from neighbour address events. - The last patch adds some missing error handling for qeth's new multiqueue code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2019, 18:48:57 UTC
bd96683 Julian Wiedmann 05 June 2019, 11:48:51 UTC s390/qeth: handle error when updating TX queue count netif_set_real_num_tx_queues() can return an error, deal with it. Fixes: 73dc2daf110f ("s390/qeth: add TX multiqueue support for OSA devices") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2019, 18:48:57 UTC
3357261 Alexandra Winter 05 June 2019, 11:48:50 UTC s390/qeth: fix VLAN attribute in bridge_hostnotify udev event Enabling sysfs attribute bridge_hostnotify triggers a series of udev events for the MAC addresses of all currently connected peers. In case no VLAN is set for a peer, the device reports the corresponding MAC addresses with VLAN ID 4096. This currently results in attribute VLAN=4096 for all non-VLAN interfaces in the initial series of events after host-notify is enabled. Instead, no VLAN attribute should be reported in the udev event for non-VLAN interfaces. Only the initial events face this issue. For dynamic changes that are reported later, the device uses a validity flag. This also changes the code so that it now sets the VLAN attribute for MAC addresses with VID 0. On Linux, no qeth interface will ever be registered with VID 0: Linux kernel registers VID 0 on all network interfaces initially, but qeth will drop .ndo_vlan_rx_add_vid for VID 0. Peers with other OSs could register MACs with VID 0. Fixes: 9f48b9db9a22 ("qeth: bridgeport support - address notifications") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2019, 18:48:57 UTC
0cd6783 Julian Wiedmann 05 June 2019, 11:48:49 UTC s390/qeth: check dst entry before use While qeth_l3 uses netif_keep_dst() to hold onto the dst, a skb's dst may still have been obsoleted (via dst_dev_put()) by the time that we end up using it. The dst then points to the loopback interface, which means the neighbour lookup in qeth_l3_get_cast_type() determines a bogus cast type of RTN_BROADCAST. For IQD interfaces this causes us to place such skbs on the wrong HW queue, resulting in TX errors. Fix-up the various call sites to first validate the dst entry with dst_check(), and fall back accordingly. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2019, 18:48:57 UTC
72c8797 Julian Wiedmann 05 June 2019, 11:48:48 UTC s390/qeth: handle limited IPv4 broadcast in L3 TX path When selecting the cast type of a neighbourless IPv4 skb (eg. on a raw socket), qeth_l3 falls back to the packet's destination IP address. For this case we should classify traffic sent to 255.255.255.255 as broadcast. This fixes DHCP requests, which were misclassified as unicast (and for IQD interfaces thus ended up on the wrong HW queue). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 June 2019, 18:48:57 UTC
7b2f936 Yan, Zheng 20 May 2019, 01:50:09 UTC ceph: fix error handling in ceph_get_caps() The function return 0 even when interrupted or try_get_cap_refs() return error. Fixes: 1199d7da2d ("ceph: simplify arguments and return semantics of try_get_cap_refs") Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> 05 June 2019, 18:34:39 UTC
3e1d045 Yan, Zheng 18 May 2019, 12:39:55 UTC ceph: avoid iput_final() while holding mutex or in dispatch thread iput_final() may wait for reahahead pages. The wait can cause deadlock. For example: Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: schedule+0x36/0x80 io_schedule+0x16/0x40 __lock_page+0x101/0x140 truncate_inode_pages_range+0x556/0x9f0 truncate_inode_pages_final+0x4d/0x60 evict+0x182/0x1a0 iput+0x1d2/0x220 iterate_session_caps+0x82/0x230 [ceph] dispatch+0x678/0xa80 [ceph] ceph_con_workfn+0x95b/0x1560 [libceph] process_one_work+0x14d/0x410 worker_thread+0x4b/0x460 kthread+0x105/0x140 ret_from_fork+0x22/0x40 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: __schedule+0x3d6/0x8b0 schedule+0x36/0x80 schedule_preempt_disabled+0xe/0x10 mutex_lock+0x2f/0x40 ceph_check_caps+0x505/0xa80 [ceph] ceph_put_wrbuffer_cap_refs+0x1e5/0x2c0 [ceph] writepages_finish+0x2d3/0x410 [ceph] __complete_request+0x26/0x60 [libceph] handle_reply+0x6c8/0xa10 [libceph] dispatch+0x29a/0xbb0 [libceph] ceph_con_workfn+0x95b/0x1560 [libceph] process_one_work+0x14d/0x410 worker_thread+0x4b/0x460 kthread+0x105/0x140 ret_from_fork+0x22/0x40 In above example, truncate_inode_pages_range() waits for readahead pages while holding s_mutex. ceph_check_caps() waits for s_mutex and blocks OSD dispatch thread. Later OSD replies (for readahead) can't be handled. ceph_check_caps() also may lock snap_rwsem for read. So similar deadlock can happen if iput_final() is called while holding snap_rwsem. In general, it's not good to call iput_final() inside MDS/OSD dispatch threads or while holding any mutex. The fix is introducing ceph_async_iput(), which calls iput_final() in workqueue. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> 05 June 2019, 18:34:39 UTC
1cf89a8 Yan, Zheng 18 May 2019, 03:18:44 UTC ceph: single workqueue for inode related works We have three workqueue for inode works. Later patch will introduce one more work for inode. It's not good to introcuce more workqueue and add more 'struct work_struct' to 'struct ceph_inode_info'. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> 05 June 2019, 18:34:39 UTC
1929059 Prike Liang 27 May 2019, 08:05:50 UTC drm/amd/amdgpu: add RLC firmware to support raven1 refresh Use SMU firmware version to indentify the raven1 refresh device and then load homologous RLC FW. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Suggested-by: Huang Rui<Ray.Huang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 05 June 2019, 16:14:15 UTC
1019fe0 Chengming Gui 13 May 2019, 09:41:19 UTC drm/amd/powerplay: add set_power_profile_mode for raven1_refresh add gfxoff_state_changed_by_workload to control gfxoff when set power_profile_mode Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 05 June 2019, 16:13:16 UTC
ce0e22f Louis Li 24 May 2019, 22:39:47 UTC drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2) [What] vce ring test fails consistently during resume in s3 cycle, due to mismatch read & write pointers. On debug/analysis its found that rptr to be compared is not being correctly updated/read, which leads to this failure. Below is the failure signature: [drm:amdgpu_vce_ring_test_ring] *ERROR* amdgpu: ring 12 test failed [drm:amdgpu_device_ip_resume_phase2] *ERROR* resume of IP block <vce_v3_0> failed -110 [drm:amdgpu_device_resume] *ERROR* amdgpu_device_ip_resume failed (-110). [How] fetch rptr appropriately, meaning move its read location further down in the code flow. With this patch applied the s3 failure is no more seen for >5k s3 cycles, which otherwise is pretty consistent. V2: remove reduntant fetch of rptr Signed-off-by: Louis Li <Ching-shih.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 05 June 2019, 16:12:21 UTC
back to top