Skip to main content

Browse the archive

https://github.com/torvalds/linux
05 April 2024, 19:05:47 UTC
sort by:
Revision Author Date Message Commit Date
5f9e832 Linus Torvalds 21 July 2019, 21:05:38 UTC Linus 5.3-rc1 21 July 2019, 21:05:38 UTC
c7bf0a0 Linus Torvalds 21 July 2019, 17:28:39 UTC Merge tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object' 21 July 2019, 17:28:39 UTC
d6788eb Linus Torvalds 21 July 2019, 17:09:43 UTC Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode... 21 July 2019, 17:09:43 UTC
91962d0 Linus Torvalds 21 July 2019, 17:01:17 UTC Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling 21 July 2019, 17:01:17 UTC
8cf6650 Qian Cai 11 July 2019, 16:17:45 UTC iommu/amd: fix a crash in iova_magazine_free_pfns The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 July 2019, 16:57:13 UTC
618381f Mike Rapoport 30 April 2019, 14:27:50 UTC hexagon: switch to generic version of pte allocation The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 July 2019, 16:53:00 UTC
bec5545 Linus Torvalds 21 July 2019, 16:46:59 UTC Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ... 21 July 2019, 16:46:59 UTC
1b03bc5 Al Viro 21 July 2019, 03:17:30 UTC typo fix: it's d_make_root, not d_make_inode... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 21 July 2019, 03:17:30 UTC
e2297f7 Rob Herring 16 July 2019, 21:34:40 UTC dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples Now that examples are validated against the DT schema, an error with required 'clocks' property missing is exposed: Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@40020000: gpio@0: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@1000: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@2000: 'clocks' is a required property Add the missing 'clocks' properties to the examples to fix the errors. Fixes: 2c9239c125f0 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org> 21 July 2019, 02:28:53 UTC
20051f5 Rob Herring 16 July 2019, 20:21:56 UTC dt-bindings: iio: ad7124: Fix dtc warnings in example With the conversion to DT schema, the examples are now compiled with dtc. The ad7124 binding example has the following warning: Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \ Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) There's a default #size-cells and #address-cells values of 1 for examples. For examples needing different values such as this one on a SPI bus, they need to provide a SPI bus parent node. Fixes: 26ae15e62d3c ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> 21 July 2019, 02:28:52 UTC
fbbf2b6 Rob Herring 16 July 2019, 20:13:29 UTC dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example Now that examples are validated against the DT schema, a typo in avia-hx711 example generates a warning: Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property Fix the typo. Fixes: 5150ec3fe125 ("avia-hx711.yaml: transform DT binding to YAML") Cc: Andreas Klinger <ak@it-klinger.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> 21 July 2019, 02:28:52 UTC
fcbe7e3 Rob Herring 15 July 2019, 22:48:41 UTC dt-bindings: pinctrl: aspeed: Fix AST2500 example errors The schema examples are now validated against the schema itself. The AST2500 pinctrl schema has a couple of errors: Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ pinctrl: aspeed,external-nodes: [[1, 2]] is too short Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org> 21 July 2019, 02:28:52 UTC
ad21a4c Rob Herring 15 July 2019, 22:37:25 UTC dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors The Aspeed pinctl schema have errors in the 'compatible' schema: Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements Flow style sequences have to be quoted if the vales contain ','. Fix this by using the more common one line per entry formatting. Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937bb5c ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org> 21 July 2019, 02:28:52 UTC
7d9ef7f Rob Herring 26 June 2019, 23:57:59 UTC dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes Matching on the 'cpus' node was a bad choice because the schema is incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus schema which checks the general structure, it is also redundant to do so in the Risc-V CPU schema. The downside is one could conceivably mix different architecture's cpu nodes or have typos in the compatible string. The latter problem pretty much exists for every schema. Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org> 21 July 2019, 02:28:52 UTC
15ffef1 Rob Herring 03 July 2019, 20:17:06 UTC dt-bindings: Ensure child nodes are of type 'object' Properties which are child node definitions need to have an explict type. Otherwise, a matching (DT) property can silently match when an error is desired. Fix this up tree-wide. Once this is fixed, the meta-schema will enforce this on any child node definitions. Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org> 21 July 2019, 02:27:29 UTC
f1a3b43 Linus Torvalds 20 July 2019, 19:22:30 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: - Apple SPI keyboard and trackpad driver for newer Macs - ALPS driver will ignore trackpoint-only devices to give the trackpoint driver a chance to handle them properly - another Lenovo is switched over to SMbus from PS/2 - assorted driver fixups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - fix a mismatch between a condition check and its comment Input: psmouse - fix build error of multiple definition Input: applespi - remove set but not used variables 'sts' Input: add Apple SPI keyboard and trackpad driver Input: alps - don't handle ALPS cs19 trackpoint-only device Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer Input: adp5589 - initialize GPIO controller parent device Input: iforce - remove empty multiline comments Input: synaptics - fix misuse of strlcpy Input: auo-pixcir-ts - switch to using devm_add_action_or_reset() Input: gtco - bounds check collection indent level Input: mtk-pmic-keys - add of_node_put() before return Input: sun4i-lradc-keys - add of_node_put() before return Input: synaptics - whitelist Lenovo T580 SMBus intertouch 20 July 2019, 19:22:30 UTC
ac60602 Linus Torvalds 20 July 2019, 19:09:52 UTC Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions: - force unencrypted dma-coherent buffers if encryption bit can't fit into the dma coherent mask (Tom Lendacky) - avoid limiting request size if swiotlb is not used (me) - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang Duan)" * tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device dma-direct: only limit the mapping size if swiotlb could be used dma-mapping: add a dma_addressing_limited helper dma-direct: Force unencrypted DMA under SME for certain DMA masks 20 July 2019, 19:09:52 UTC
c6dd78f Linus Torvalds 20 July 2019, 18:24:49 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 specific fixes and updates: - The CR2 corruption fixes which store CR2 early in the entry code and hand the stored address to the fault handlers. - Revert a forgotten leftover of the dropped FSGSBASE series. - Plug a memory leak in the boot code. - Make the Hyper-V assist functionality robust by zeroing the shadow page. - Remove a useless check for dead processes with LDT - Update paravirt and VMware maintainers entries. - A few cleanup patches addressing various compiler warnings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Prevent clobbering of saved CR2 value x86/hyper-v: Zero out the VP ASSIST PAGE on allocation x86, boot: Remove multiple copy of static function sanitize_boot_params() x86/boot/compressed/64: Remove unused variable x86/boot/efi: Remove unused variables x86/mm, tracing: Fix CR2 corruption x86/entry/64: Update comments and sanity tests for create_gap x86/entry/64: Simplify idtentry a little x86/entry/32: Simplify common_exception x86/paravirt: Make read_cr2() CALLEE_SAVE MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE x86/process: Delete useless check for dead process with LDT x86: math-emu: Hide clang warnings for 16-bit overflow x86/e820: Use proper booleans instead of 0/1 x86/apic: Silence -Wtype-limits compiler warnings x86/mm: Free sme_early_buffer after init x86/boot: Fix memory leak in default_get_smp_config() Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test 20 July 2019, 18:24:49 UTC
46f5c0c Linus Torvalds 20 July 2019, 18:06:12 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates from Thomas Gleixner: "A set of perf improvements and fixes: perf db-export: - Improvements in how COMM details are exported to databases for post processing and use in the sql-viewer.py UI. - Export switch events to the database. BPF: - Bump rlimit(MEMLOCK) for 'perf test bpf' and 'perf trace', just like selftests/bpf/bpf_rlimit.h do, which makes errors due to exhaustion of this limit, which are kinda cryptic (EPERM sometimes) less frequent. perf version: - Fix segfault due to missing OPT_END(), noticed on PowerPC. perf vendor events: - Add JSON files for IBM s/390 machine type 8561. perf cs-etm (ARM): - Fix two cases of error returns not bing done properly: Invalid ERR_PTR() use and loss of propagation error codes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) perf version: Fix segfault due to missing OPT_END() perf vendor events s390: Add JSON files for machine type 8561 perf cs-etm: Return errcode in cs_etm__process_auxtrace_info() perf cs-etm: Remove errnoeous ERR_PTR() usage in cs_etm__process_auxtrace_info perf scripts python: export-to-postgresql.py: Export switch events perf scripts python: export-to-sqlite.py: Export switch events perf db-export: Export switch events perf db-export: Factor out db_export__threads() perf script: Add scripting operation process_switch() perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column perf scripts python: exported-sql-viewer.py: Remove redundant semi-colons perf scripts python: export-to-postgresql.py: Add has_calls column to comms table perf scripts python: export-to-sqlite.py: Add has_calls column to comms table perf db-export: Also export thread's current comm perf db-export: Factor out db_export__comm() perf scripts python: export-to-postgresql.py: Export comm details perf scripts python: export-to-sqlite.py: Export comm details perf db-export: Export comm details perf db-export: Fix a white space issue in db_export__sample() perf db-export: Move export__comm_thread into db_export__sample() ... 20 July 2019, 18:06:12 UTC
e6023ad Linus Torvalds 20 July 2019, 17:45:15 UTC Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: - A collection of objtool fixes which address recent fallout partially exposed by newer toolchains, clang, BPF and general code changes. - Force USER_DS for user stack traces [ Note: the "objtool fixes" are not all to objtool itself, but for kernel code that triggers objtool warnings. Things like missing function size annotations, or code that confuses the unwinder etc. - Linus] * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) objtool: Support conditional retpolines objtool: Convert insn type to enum objtool: Fix seg fault on bad switch table entry objtool: Support repeated uses of the same C jump table objtool: Refactor jump table code objtool: Refactor sibling call detection logic objtool: Do frame pointer check before dead end check objtool: Change dead_end_function() to return boolean objtool: Warn on zero-length functions objtool: Refactor function alias logic objtool: Track original function across branches objtool: Add mcsafe_handle_tail() to the uaccess safe list bpf: Disable GCC -fgcse optimization for ___bpf_prog_run() x86/uaccess: Remove redundant CLACs in getuser/putuser error paths x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail() x86/uaccess: Remove ELF function annotation from copy_user_handle_tail() x86/head/64: Annotate start_cpu0() as non-callable x86/entry: Fix thunk function ELF sizes x86/kvm: Don't call kvm_spurious_fault() from .fixup x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2 ... 20 July 2019, 17:45:15 UTC
4b01f5a Linus Torvalds 20 July 2019, 17:43:03 UTC Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp fix from Thomas Gleixner: "Add warnings to the smp function calls so callers from wrong contexts get detected" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Warn on function calls from softirq context 20 July 2019, 17:43:03 UTC
70e6e1b Linus Torvalds 20 July 2019, 17:33:44 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CONFIG_PREEMPT_RT stub config from Thomas Gleixner: "The real-time preemption patch set exists for almost 15 years now and while the vast majority of infrastructure and enhancements have found their way into the mainline kernel, the final integration of RT is still missing. Over the course of the last few years, we have worked on reducing the intrusivenness of the RT patches by refactoring kernel infrastructure to be more real-time friendly. Almost all of these changes were benefitial to the mainline kernel on their own, so there was no objection to integrate them. Though except for the still ongoing printk refactoring, the remaining changes which are required to make RT a first class mainline citizen are not longer arguable as immediately beneficial for the mainline kernel. Most of them are either reordering code flows or adding RT specific functionality. But this now has hit a wall and turned into a classic hen and egg problem: Maintainers are rightfully wary vs. these changes as they make only sense if the final integration of RT into the mainline kernel takes place. Adding CONFIG_PREEMPT_RT aims to solve this as a clear sign that RT will be fully integrated into the mainline kernel. The final integration of the missing bits and pieces will be of course done with the same careful approach as we have used in the past. While I'm aware that you are not entirely enthusiastic about that, I think that RT should receive the same treatment as any other widely used out of tree functionality, which we have accepted into mainline over the years. RT has become the de-facto standard real-time enhancement and is shipped by enterprise, embedded and community distros. It's in use throughout a wide range of industries: telecommunications, industrial automation, professional audio, medical devices, data acquisition, automotive - just to name a few major use cases. RT development is backed by a Linuxfoundation project which is supported by major stakeholders of this technology. The funding will continue over the actual inclusion into mainline to make sure that the functionality is neither introducing regressions, regressing itself, nor becomes subject to bitrot. There is also a lifely user community around RT as well, so contrary to the grim situation 5 years ago, it's a healthy project. As RT is still a good vehicle to exercise rarely used code paths and to detect hard to trigger issues, you could at least view it as a QA tool if nothing else" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT 20 July 2019, 17:33:44 UTC
07ab9d5 Linus Torvalds 20 July 2019, 17:20:27 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more KVM updates from Paolo Bonzini: "Mostly bugfixes, but also: - s390 support for KVM selftests - LAPIC timer offloading to housekeeping CPUs - Extend an s390 optimization for overcommitted hosts to all architectures - Debugging cleanups and improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) KVM: x86: Add fixed counters to PMU filter KVM: nVMX: do not use dangling shadow VMCS after guest reset KVM: VMX: dump VMCS on failed entry KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup KVM: Boost vCPUs that are delivering interrupts KVM: selftests: Remove superfluous define from vmx.c KVM: SVM: Fix detection of AMD Errata 1096 KVM: LAPIC: Inject timer interrupt via posted interrupt KVM: LAPIC: Make lapic timer unpinned KVM: x86/vPMU: reset pmc->counter to 0 for pmu fixed_counters KVM: nVMX: Ignore segment base for VMX memory operand when segment not FS or GS kvm: x86: ioapic and apic debug macros cleanup kvm: x86: some tsc debug cleanup kvm: vmx: fix coccinelle warnings x86: kvm: avoid constant-conversion warning x86: kvm: avoid -Wsometimes-uninitized warning KVM: x86: expose AVX512_BF16 feature to guest KVM: selftests: enable pgste option for the linker on s390 KVM: selftests: Move kvm_create_max_vcpus test to generic code ... 20 July 2019, 17:20:27 UTC
f65420d Linus Torvalds 20 July 2019, 17:04:58 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is the final round of mostly small fixes in our initial submit. It's mostly minor fixes and driver updates. The only change of note is adding a virt_boundary_mask to the SCSI host and host template to parametrise this for NVMe devices instead of having them do a call in slave_alloc. It's a fairly straightforward conversion except in the two NVMe handling drivers that didn't set it who now have a virtual infinity parameter added" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: megaraid_sas: set an unlimited max_segment_size scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs scsi: IB/srp: set virt_boundary_mask in the scsi host scsi: IB/iser: set virt_boundary_mask in the scsi host scsi: storvsc: set virt_boundary_mask in the scsi host template scsi: ufshcd: set max_segment_size in the scsi host template scsi: core: take the DMA max mapping size into account scsi: core: add a host / host template field for the virt boundary scsi: core: Fix race on creating sense cache scsi: sd_zbc: Fix compilation warning scsi: libfc: fix null pointer dereference on a null lport scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized scsi: zfcp: fix request object use-after-free in send path causing wrong traces scsi: zfcp: fix request object use-after-free in send path causing seqno errors scsi: megaraid_sas: Update driver version to 07.710.50.00 scsi: megaraid_sas: Add module parameter for FW Async event logging scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers scsi: megaraid_sas: Fix calculation of target ID scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade ... 20 July 2019, 17:04:58 UTC
168c799 Linus Torvalds 20 July 2019, 16:34:55 UTC Merge tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - match the directory structure of the linux-libc-dev package to that of Debian-based distributions - fix incorrect include/config/auto.conf generation when Kconfig creates it along with the .config file - remove misleading $(AS) from documents - clean up precious tag files by distclean instead of mrproper - add a new coccinelle patch for devm_platform_ioremap_resource migration - refactor module-related scripts to read modules.order instead of $(MODVERDIR)/*.mod files to get the list of created modules - remove MODVERDIR - update list of header compile-test - add -fcf-protection=none flag to avoid conflict with the retpoline flags when CONFIG_RETPOLINE=y - misc cleanups * tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: add -fcf-protection=none when using retpoline flags kbuild: update compile-test header list for v5.3-rc1 kbuild: split out *.mod out of {single,multi}-used-m rules kbuild: remove 'prepare1' target kbuild: remove the first line of *.mod files kbuild: create *.mod with full directory path and remove MODVERDIR kbuild: export_report: read modules.order instead of .tmp_versions/*.mod kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver kbuild: remove duplication from modules.order in sub-directories kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin} kbuild: do not create empty modules.order in the prepare stage coccinelle: api: add devm_platform_ioremap_resource script kbuild: compile-test headers listed in header-test-m as well kbuild: remove unused hostcc-option kbuild: remove tag files by distclean instead of mrproper kbuild: add --hash-style= and --build-id unconditionally kbuild: get rid of misleading $(AS) from documents ... 20 July 2019, 16:34:55 UTC
18253e0 Linus Torvalds 20 July 2019, 16:15:51 UTC Merge branch 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull dcache and mountpoint updates from Al Viro: "Saner handling of refcounts to mountpoints. Transfer the counting reference from struct mount ->mnt_mountpoint over to struct mountpoint ->m_dentry. That allows us to get rid of the convoluted games with ordering of mount shutdowns. The cost is in teaching shrink_dcache_{parent,for_umount} to cope with mixed-filesystem shrink lists, which we'll also need for the Slab Movable Objects patchset" * 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch the remnants of releasing the mountpoint away from fs_pin get rid of detach_mnt() make struct mountpoint bear the dentry reference to mountpoint, not struct mount Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists fs/namespace.c: shift put_mountpoint() to callers of unhash_mnt() __detach_mounts(): lookup_mountpoint() can't return ERR_PTR() anymore nfs: dget_parent() never returns NULL ceph: don't open-code the check for dead lockref 20 July 2019, 16:15:51 UTC
6879298 Thomas Gleixner 20 July 2019, 08:56:41 UTC x86/entry/64: Prevent clobbering of saved CR2 value The recent fix for CR2 corruption introduced a new way to reliably corrupt the saved CR2 value. CR2 is saved early in the entry code in RDX, which is the third argument to the fault handling functions. But it missed that between saving and invoking the fault handler enter_from_user_mode() can be called. RDX is a caller saved register so the invoked function can freely clobber it with the obvious consequences. The TRACE_IRQS_OFF call is safe as it calls through the thunk which preserves RDX, but TRACE_IRQS_OFF_DEBUG is not because it also calls into C-code outside of the thunk. Store CR2 in R12 instead which is a callee saved register and move R12 to RDX just before calling the fault handler. Fixes: a0d14b8909de ("x86/mm, tracing: Fix CR2 corruption") Reported-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907201020540.1782@nanos.tec.linutronix.de 20 July 2019, 12:28:41 UTC
19dbdcb Peter Zijlstra 18 July 2019, 09:20:09 UTC smp: Warn on function calls from softirq context It's clearly documented that smp function calls cannot be invoked from softirq handling context. Unfortunately nothing enforces that or emits a warning. A single function call can be invoked from softirq context only via smp_call_function_single_async(). The only legit context is task context, so add a warning to that effect. Reported-by: luferry <luferry@163.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190718160601.GP3402@hirez.programming.kicks-ass.net 20 July 2019, 09:27:16 UTC
30cd860 Eric Hankland 18 July 2019, 18:38:18 UTC KVM: x86: Add fixed counters to PMU filter Updates KVM_CAP_PMU_EVENT_FILTER so it can also whitelist or blacklist fixed counters. Signed-off-by: Eric Hankland <ehankland@google.com> [No need to check padding fields for zero. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 20 July 2019, 07:00:48 UTC
88dddc1 Paolo Bonzini 19 July 2019, 16:41:10 UTC KVM: nVMX: do not use dangling shadow VMCS after guest reset If a KVM guest is reset while running a nested guest, free_nested will disable the shadow VMCS execution control in the vmcs01. However, on the next KVM_RUN vmx_vcpu_run would nevertheless try to sync the VMCS12 to the shadow VMCS which has since been freed. This causes a vmptrld of a NULL pointer on my machime, but Jan reports the host to hang altogether. Let's see how much this trivial patch fixes. Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 20 July 2019, 07:00:47 UTC
3b20e03 Paolo Bonzini 19 July 2019, 16:15:08 UTC KVM: VMX: dump VMCS on failed entry This is useful for debugging, and is ratelimited nowadays. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 20 July 2019, 07:00:47 UTC
6fc3977 Like Xu 18 July 2019, 05:35:14 UTC KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed If a perf_event creation fails due to any reason of the host perf subsystem, it has no chance to log the corresponding event for guest which may cause abnormal sampling data in guest result. In debug mode, this message helps to understand the state of vPMC and we may not limit the number of occurrences but not in a spamming style. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 20 July 2019, 07:00:46 UTC
d984740 Wanpeng Li 18 July 2019, 11:39:07 UTC KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup Use kvm_vcpu_wake_up() in kvm_s390_vcpu_wakeup(). Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 20 July 2019, 07:00:45 UTC
d73eb57 Wanpeng Li 18 July 2019, 11:39:06 UTC KVM: Boost vCPUs that are delivering interrupts Inspired by commit 9cac38dd5d (KVM/s390: Set preempted flag during vcpu wakeup and interrupt delivery), we want to also boost not just lock holders but also vCPUs that are delivering interrupts. Most smp_call_function_many calls are synchronous, so the IPI target vCPUs are also good yield candidates. This patch introduces vcpu->ready to boost vCPUs during wakeup and interrupt delivery time; unlike s390 we do not reuse vcpu->preempted so that voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin, but vmx_vcpu_pi_put is not affected (VT-d PI handles voluntary preemption separately, in pi_pre_block). Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM: ebizzy -M vanilla boosting improved 1VM 21443 23520 9% 2VM 2800 8000 180% 3VM 1800 3100 72% Testing on my Haswell desktop 8 HT, with 8 vCPUs VM 8GB RAM, two VMs, one running ebizzy -M, the other running 'stress --cpu 2': w/ boosting + w/o pv sched yield(vanilla) vanilla boosting improved 1570 4000 155% w/ boosting + w/ pv sched yield(vanilla) vanilla boosting improved 1844 5157 179% w/o boosting, perf top in VM: 72.33% [kernel] [k] smp_call_function_many 4.22% [kernel] [k] call_function_i 3.71% [kernel] [k] async_page_fault w/ boosting, perf top in VM: 38.43% [kernel] [k] smp_call_function_many 6.31% [kernel] [k] async_page_fault 6.13% libc-2.23.so [.] __memcpy_avx_unaligned 4.88% [kernel] [k] call_function_interrupt Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 20 July 2019, 07:00:45 UTC
2417c87 Thomas Huth 18 July 2019, 11:55:27 UTC KVM: selftests: Remove superfluous define from vmx.c The code in vmx.c does not use "program_invocation_name", so there is no need to "#define _GNU_SOURCE" here. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 20 July 2019, 07:00:44 UTC
118154b Liran Alon 16 July 2019, 23:56:58 UTC KVM: SVM: Fix detection of AMD Errata 1096 When CPU raise #NPF on guest data access and guest CR4.SMAP=1, it is possible that CPU microcode implementing DecodeAssist will fail to read bytes of instruction which caused #NPF. This is AMD errata 1096 and it happens because CPU microcode reading instruction bytes incorrectly attempts to read code as implicit supervisor-mode data accesses (that is, just like it would read e.g. a TSS), which are susceptible to SMAP faults. The microcode reads CS:RIP and if it is a user-mode address according to the page tables, the processor gives up and returns no instruction bytes. In this case, GuestIntrBytes field of the VMCB on a VMEXIT will incorrectly return 0 instead of the correct guest instruction bytes. Current KVM code attemps to detect and workaround this errata, but it has multiple issues: 1) It mistakenly checks if guest CR4.SMAP=0 instead of guest CR4.SMAP=1, which is required for encountering a SMAP fault. 2) It assumes SMAP faults can only occur when guest CPL==3. However, in case guest CR4.SMEP=0, the guest can execute an instruction which reside in a user-accessible page with CPL<3 priviledge. If this instruction raise a #NPF on it's data access, then CPU DecodeAssist microcode will still encounter a SMAP violation. Even though no sane OS will do so (as it's an obvious priviledge escalation vulnerability), we still need to handle this semanticly correct in KVM side. Note that (2) *is* a useful optimization, because CR4.SMAP=1 is an easy triggerable condition and guests usually enable SMAP together with SMEP. If the vCPU has CR4.SMEP=1, the errata could indeed be encountered onlt at guest CPL==3; otherwise, the CPU would raise a SMEP fault to guest instead of #NPF. We keep this condition to avoid false positives in the detection of the errata. In addition, to avoid future confusion and improve code readbility, include details of the errata in code and not just in commit message. Fixes: 05d5a4863525 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)") Cc: Singh Brijesh <brijesh.singh@amd.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 20 July 2019, 07:00:44 UTC
0c5f81d Wanpeng Li 06 July 2019, 01:26:51 UTC KVM: LAPIC: Inject timer interrupt via posted interrupt Dedicated instances are currently disturbed by unnecessary jitter due to the emulated lapic timers firing on the same pCPUs where the vCPUs reside. There is no hardware virtual timer on Intel for guest like ARM, so both programming timer in guest and the emulated timer fires incur vmexits. This patch tries to avoid vmexit when the emulated timer fires, at least in dedicated instance scenario when nohz_full is enabled. In that case, the emulated timers can be offload to the nearest busy housekeeping cpus since APICv has been found for several years in server processors. The guest timer interrupt can then be injected via posted interrupts, which are delivered by the housekeeping cpu once the emulated timer fires. The host should tuned so that vCPUs are placed on isolated physical processors, and with several pCPUs surplus for busy housekeeping. If disabled mwait/hlt/pause vmexits keep the vCPUs in non-root mode, ~3% redis performance benefit can be observed on Skylake server, and the number of external interrupt vmexits drops substantially. Without patch VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 42916 49.43% 39.30% 0.47us 106.09us 0.71us ( +- 1.09% ) While with patch: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 6871 9.29% 2.96% 0.44us 57.88us 0.72us ( +- 4.02% ) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 20 July 2019, 07:00:40 UTC
c39f2d9 Dmitry Torokhov 20 July 2019, 04:07:56 UTC Merge branch 'next' into for-linus Prepare second round of input updates for 5.3 merge window. 20 July 2019, 04:07:56 UTC
29be86d Seth Forshee 17 July 2019, 16:06:26 UTC kbuild: add -fcf-protection=none when using retpoline flags The gcc -fcf-protection=branch option is not compatible with -mindirect-branch=thunk-extern. The latter is used when CONFIG_RETPOLINE is selected, and this will fail to build with a gcc which has -fcf-protection=branch enabled by default. Adding -fcf-protection=none when building with retpoline enabled prevents such build failures. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 20 July 2019, 02:20:24 UTC
67bf474 Masahiro Yamada 17 July 2019, 06:29:13 UTC kbuild: update compile-test header list for v5.3-rc1 - Some headers graduated from the blacklist - hyperv_timer.h joined the header-test when CONFIG_X86=y - nf_tables*.h joined the header-test when CONFIG_NF_TABLES is enabled. - The entry for nf_tables_offload.h was added to fix build error for the combination of CONFIG_NF_TABLES=n and CONFIG_KERNEL_HEADER_TEST=y. - The entry for iomap.h was added because this header is supposed to be included only when CONFIG_BLOCK=y Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 20 July 2019, 02:19:29 UTC
abdfd52 Linus Torvalds 20 July 2019, 00:27:27 UTC Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: configs: multi_v5: Remove duplicate ASPEED options arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT defconfig: arm64: enable i.MX8 SCU octop driver arm64: defconfig: Add i.MX SCU SoC info driver arm64: defconfig: Enable CONFIG_QORIQ_THERMAL ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_SNVS_LPGPR arm64: defconfig: ARM_IMX_CPUFREQ_DT=m ARM: imx_v6_v7_defconfig: Add TPM PWM support by default ARM: imx_v6_v7_defconfig: Enable the OV2680 camera driver ARM: imx_v6_v7_defconfig: Enable CONFIG_THERMAL_STATISTICS arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8m ARM: multi_v7_defconfig: enable STMFX pinctrl support arm64 defconfig: enable LVM support ARM: configs: multi_v5: Add more ASPEED devices arm64: defconfig: Add Tegra194 PCIe driver ARM: configs: aspeed: Add new drivers ARM: exynos_defconfig: Enable Panfrost and Lima drivers ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers arm64 defconfig: enable Mellanox cards ... 20 July 2019, 00:27:27 UTC
af6af87 Linus Torvalds 20 July 2019, 00:19:24 UTC Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Devicetree updates from Olof Johansson: "We continue to see a lot of new material. I've highlighted some of it below, but there's been more beyond that as well. One of the sweeping changes is that many boards have seen their ARM Mali GPU devices added to device trees, since the DRM drivers have now been merged. So, with the caveat that I have surely missed several great contributions, here's a collection of the material this time around: New SoCs: - Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53) - TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA) - Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53) New Boards / platforms: - Aspeed BMC support for a number of new server platforms - Kontron SMARC SoM (several i.MX6 versions) - Novtech's Meerkat96 (i.MX7) - ST Micro Avenger96 board - Hardkernel ODROID-N2 (Amlogic G12B) - Purism Librem5 devkit (i.MX8MQ) - Google Cheza (Qualcomm SDM845) - Qualcomm Dragonboard 845c (Qualcomm SDM845) - Hugsun X99 TV Box (Rockchip RK3399) - Khadas Edge/Edge-V/Captain (Rockchip RK3399) Updated / expanded boards and platforms: - Renesas r7s9210 has a lot of new peripherals added - Fixes and polish for Rockchip-based Chromebooks - Amlogic G12A has a lot of peripherals added - Nvidia Jetson Nano sees various fixes and improvements, and is now at feature parity with TX1" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits) ARM: dts: gemini: Set DIR-685 SPI CS as active low ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family ARM: dts: exynos: Move Mali400 GPU node to "/soc" ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210 arm64: dts: qcom: qcs404: Add missing space for cooling-cells property arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs arm64: dts: rockchip: enable rk3328 watchdog clock ARM: dts: rockchip: add display nodes for rk322x ARM: dts: rockchip: fix vop iommu-cells on rk322x arm64: dts: rockchip: Add support for Hugsun X99 TV Box arm64: dts: rockchip: Define values for the IPA governor for rock960 arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance. Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie" ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron arm64: dts: qcom: sdm845-cheza: add initial cheza dt ARM: dts: msm8974-FP2: Add vibration motor ... 20 July 2019, 00:19:24 UTC
8362fd6 Linus Torvalds 20 July 2019, 00:13:56 UTC Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: - A driver for SCU (system control) on NXP i.MX8QXP - Qualcomm Always-on Subsystem messaging driver (AOSS QMP) - Qualcomm PM support for MSM8998 - Support for a newer version of DRAM PHY driver for Broadcom (DPFE) - Reset controller support for Bitmain BM1880 - TI SCI (System Control Interface) support for CPU control on AM654 processors - More TI sysc refactoring and rework" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits) reset: remove redundant null check on pointer dev soc: rockchip: work around clang warning dt-bindings: reset: imx7: Fix the spelling of 'indices' soc: imx: Add i.MX8MN SoC driver support soc: aspeed: lpc-ctrl: Fix probe error handling soc: qcom: geni: Add support for ACPI firmware: ti_sci: Fix gcc unused-but-set-variable warning firmware: ti_sci: Use the correct style for SPDX License Identifier soc: imx8: Use existing of_root directly soc: imx8: Fix potential kernel dump in error path firmware/psci: psci_checker: Park kthreads before stopping them memory: move jedec_ddr.h from include/memory to drivers/memory/ memory: move jedec_ddr_data.c from lib/ to drivers/memory/ MAINTAINERS: Remove myself as qcom maintainer soc: aspeed: lpc-ctrl: make parameter optional soc: qcom: apr: Don't use reg for domain id soc: qcom: fix QCOM_AOSS_QMP dependency and build errors memory: tegra: Fix -Wunused-const-variable firmware: tegra: Early resume BPMP soc/tegra: Select pinctrl for Tegra194 ... 20 July 2019, 00:13:56 UTC
24e4491 Linus Torvalds 20 July 2019, 00:05:08 UTC Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform updates from Olof Johansson: "SoC platform changes. Main theme this merge window: - The Netx platform (Netx 100/500) platform is removed by Linus Walleij-- the SoC doesn't have active maintainers with hardware, and in discussions with the vendor the agreement was that it's OK to remove. - Russell King has a series of patches that cleans up and refactors SA1101 and RiscPC support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: stm32: use "depends on" instead of "if" after prompt ARM: sa1100: convert to common clock framework ARM: exynos: Cleanup cppcheck shifting warning ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view ARM: exynos: Only build MCPM support if used arm: add missing include platform-data/atmel.h ARM: davinci: Use GPIO lookup table for DA850 LEDs ARM: OMAP2: drop explicit assembler architecture ARM: use arch_extension directive instead of arch argument ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card MAINTAINERS: mvebu: Add git entry soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh ARM: OMAP2+: Make some variables static ... 20 July 2019, 00:05:08 UTC
31cc088 Linus Torvalds 19 July 2019, 19:29:43 UTC Merge tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Daniel Vetter: "Dave is back in shape, but now family got it so I'm doing the pull. Two things worthy of note: - nouveau feature pull was way too late, Dave&me decided to not take that, so Ben spun up a pull with just the fixes. - after some chatting with the arm display maintainers we decided to change a bit how that's maintained, for more oversight/review and cross vendor collab. More details below: nouveau: - bugfixes - TU116 enabling (minor iteration) :w amdgpu: - large pile of fixes for new hw support this release (navi, vega20) - audio hotplug fix - bunch of corner cases and small fixes all over for amdgpu/kfd komeda: - back out some new properties (from this merge window) that needs more pondering. bochs: - fb pitch setup core: - a new panel quirk - misc fixes" * tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm: (73 commits) drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP drm/nouveau: fix memory leak in nouveau_conn_reset() drm/nouveau/dmem: missing mutex_lock in error path drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads drm/nouveau: fix bogus GPL-2 license header drm/nouveau: fix bogus GPL-2 license header drm/nouveau/i2c: Enable i2c pads & busses during preinit drm/nouveau/disp/tu102-: wire up scdc parameter setter drm/nouveau/core: recognise TU116 chipset drm/nouveau/kms: disallow dual-link harder if hdmi connection detected drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89. drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlers drm/amd/display: Force uclk to max for every state drm/amdkfd: Remove GWS from process during uninit drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface drm/amd/powerplay: update vega20 driver if to fit latest SMU firmware ... 19 July 2019, 19:29:43 UTC
dd4542d Linus Torvalds 19 July 2019, 19:23:37 UTC Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix missed wake-up race in padata - Use crypto_memneq in ccp - Fix version check in ccp - Fix fuzz test failure in ccp - Fix potential double free in crypto4xx - Fix compile warning in stm32 * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: padata: use smp_mb in padata_reorder to avoid orphaned padata jobs crypto: ccp - Fix SEV_VERSION_GREATER_OR_EQUAL crypto: ccp/gcm - use const time tag comparison. crypto: ccp - memset structure fields to zero before reuse crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe crypto: stm32/hash - Fix incorrect printk modifier for size_t 19 July 2019, 19:23:37 UTC
40ef768 Dave Jones 19 July 2019, 03:51:56 UTC Remove references to dead website. This fell into disrepair a while ago, and the majority of hits to the snapshots were from bots, so it's more trouble to keep running than it's worth. Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 July 2019, 19:22:04 UTC
41ba485 Linus Torvalds 19 July 2019, 19:18:46 UTC Merge tag 'trace-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Eiichi Tsukata found a small bug from the fixup of the stack code Removing ULONG_MAX as the marker for the user stack trace end, made the tracing code not know where the end is. The end is now marked with a zero (NULL) pointer. Eiichi fixed this in the tracing code" * tag 'trace-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix user stack trace "??" output 19 July 2019, 19:18:46 UTC
a84d2d2 Linus Torvalds 19 July 2019, 19:15:33 UTC Merge tag 'csky-for-linus-5.3-rc1' of git://github.com/c-sky/csky-linux Pull arch/csky pupdates from Guo Ren: "This round of csky subsystem gives two features (ASID algorithm update, Perf pmu record support) and some fixups. ASID updates: - Revert mmu ASID mechanism - Add new asid lib code from arm - Use generic asid algorithm to implement switch_mm - Improve tlb operation with help of asid Perf pmu record support: - Init pmu as a device - Add count-width property for csky pmu - Add pmu interrupt support - Fix perf record in kernel/user space - dt-bindings: Add csky PMU bindings Fixes: - Fixup no panic in kernel for some traps - Fixup some error count in 810 & 860. - Fixup abiv1 memset error" * tag 'csky-for-linus-5.3-rc1' of git://github.com/c-sky/csky-linux: csky: Fixup abiv1 memset error csky: Improve tlb operation with help of asid csky: Use generic asid algorithm to implement switch_mm csky: Add new asid lib code from arm csky: Revert mmu ASID mechanism dt-bindings: csky: Add csky PMU bindings dt-bindings: interrupt-controller: Update csky mpintc csky: Fixup some error count in 810 & 860. csky: Fix perf record in kernel/user space csky: Add pmu interrupt support csky: Add count-width property for csky pmu csky: Init pmu as a device csky: Fixup no panic in kernel for some traps csky: Select intc & timer drivers 19 July 2019, 19:15:33 UTC
b5d72dd Linus Torvalds 19 July 2019, 18:41:26 UTC Merge tag 'for-linus-5.3a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Fixes and features: - A series to introduce a common command line parameter for disabling paravirtual extensions when running as a guest in virtualized environment - A fix for int3 handling in Xen pv guests - Removal of the Xen-specific tmem driver as support of tmem in Xen has been dropped (and it was experimental only) - A security fix for running as Xen dom0 (XSA-300) - A fix for IRQ handling when offlining cpus in Xen guests - Some small cleanups" * tag 'for-linus-5.3a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: let alloc_xenballooned_pages() fail if not enough memory free xen/pv: Fix a boot up hang revealed by int3 self test x86/xen: Add "nopv" support for HVM guest x86/paravirt: Remove const mark from x86_hyper_xen_hvm variable xen: Map "xen_nopv" parameter to "nopv" and mark it obsolete x86: Add "nopv" parameter to disable PV extensions x86/xen: Mark xen_hvm_need_lapic() and xen_x2apic_para_available() as __init xen: remove tmem driver Revert "x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized" xen/events: fix binding user event channels to cpus 19 July 2019, 18:41:26 UTC
26473f8 Linus Torvalds 19 July 2019, 18:38:12 UTC Merge tag 'iomap-5.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull iomap split/cleanup from Darrick Wong: "As promised, here's the second part of the iomap merge for 5.3, in which we break up iomap.c into smaller files grouped by functional area so that it'll be easier in the long run to maintain cohesiveness of code units and to review incoming patches. There are no functional changes and fs/iomap.c split cleanly. Summary: - Regroup the fs/iomap.c code by major functional area so that we can start development for 5.4 from a more stable base" * tag 'iomap-5.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: move internal declarations into fs/iomap/ iomap: move the main iteration code into a separate file iomap: move the buffered IO code into a separate file iomap: move the direct IO code into a separate file iomap: move the SEEK_HOLE code into a separate file iomap: move the file mapping reporting code into a separate file iomap: move the swapfile code into a separate file iomap: start moving code to fs/iomap/ 19 July 2019, 18:38:12 UTC
4f5ed13 Linus Torvalds 19 July 2019, 18:35:08 UTC Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: perf_event_get(): don't bother with fget_raw() vfs: update d_make_root() description 19 July 2019, 18:35:08 UTC
d2fbf4b Linus Torvalds 19 July 2019, 18:33:22 UTC Merge branch 'work.adfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull adfs updates from Al Viro: "More ADFS patches from Russell King" * 'work.adfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/adfs: add time stamp and file type helpers fs/adfs: super: limit idlen according to directory type fs/adfs: super: fix use-after-free bug fs/adfs: super: safely update options on remount fs/adfs: super: correct superblock flags fs/adfs: clean up indirect disc addresses and fragment IDs fs/adfs: clean up error message printing fs/adfs: use %pV for error messages fs/adfs: use format_version from disc_record fs/adfs: add helper to get filesystem size fs/adfs: add helper to get discrecord from map fs/adfs: correct disc record structure 19 July 2019, 18:33:22 UTC
933a90b Linus Torvalds 19 July 2019, 17:42:02 UTC Merge branch 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ... 19 July 2019, 17:42:02 UTC
5f4fc6d Linus Torvalds 19 July 2019, 17:06:06 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix AF_XDP cq entry leak, from Ilya Maximets. 2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit. 3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika. 4) Fix handling of neigh timers wrt. entries added by userspace, from Lorenzo Bianconi. 5) Various cases of missing of_node_put(), from Nishka Dasgupta. 6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing. 7) Various RDS layer fixes, from Gerd Rausch. 8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from Cong Wang. 9) Fix FIB source validation checks over loopback, also from Cong Wang. 10) Use promisc for unsupported number of filters, from Justin Chen. 11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) tcp: fix tcp_set_congestion_control() use from bpf hook ag71xx: fix return value check in ag71xx_probe() ag71xx: fix error return code in ag71xx_probe() usb: qmi_wwan: add D-Link DWM-222 A2 device ID bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips. net: dsa: sja1105: Fix missing unlock on error in sk_buff() gve: replace kfree with kvfree selftests/bpf: fix test_xdp_noinline on s390 selftests/bpf: fix "valid read map access into a read-only array 1" on s390 net/mlx5: Replace kfree with kvfree MAINTAINERS: update netsec driver ipv6: Unlink sibling route in case of failure liquidio: Replace vmalloc + memset with vzalloc udp: Fix typo in net/ipv4/udp.c net: bcmgenet: use promisc for unsupported filters ipv6: rt6_check should return NULL if 'from' is NULL tipc: initialize 'validated' field of received packets selftests: add a test case for rp_filter fib: relax source validation check for loopback packets mlxsw: spectrum: Do not process learned records with a dummy FID ... 19 July 2019, 17:06:06 UTC
249be85 Linus Torvalds 19 July 2019, 16:45:58 UTC Merge branch 'akpm' (patches from Andrew) Merge yet more updates from Andrew Morton: "The rest of MM and a kernel-wide procfs cleanup. Summary of the more significant patches: - Patch series "mm/memory_hotplug: Factor out memory block devicehandling", v3. David Hildenbrand. Some spring-cleaning of the memory hotplug code, notably in drivers/base/memory.c - "mm: thp: fix false negative of shmem vma's THP eligibility". Yang Shi. Fix /proc/pid/smaps output for THP pages used in shmem. - "resource: fix locking in find_next_iomem_res()" + 1. Nadav Amit. Bugfix and speedup for kernel/resource.c - Patch series "mm: Further memory block device cleanups", David Hildenbrand. More spring-cleaning of the memory hotplug code. - Patch series "mm: Sub-section memory hotplug support". Dan Williams. Generalise the memory hotplug code so that pmem can use it more completely. Then remove the hacks from the libnvdimm code which were there to work around the memory-hotplug code's constraints. - "proc/sysctl: add shared variables for range check", Matteo Croce. We have about 250 instances of int zero; ... .extra1 = &zero, in the tree. This is a tree-wide sweep to make all those private "zero"s and "one"s use global variables. Alas, it isn't practical to make those two global integers const" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits) proc/sysctl: add shared variables for range check mm: migrate: remove unused mode argument mm/sparsemem: cleanup 'section number' data types libnvdimm/pfn: stop padding pmem namespaces to section alignment libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields mm/devm_memremap_pages: enable sub-section remap mm: document ZONE_DEVICE memory-model implications mm/sparsemem: support sub-section hotplug mm/sparsemem: prepare for sub-section ranges mm: kill is_dev_zone() helper mm/hotplug: kill is_dev_zone() usage in __remove_pages() mm/sparsemem: convert kmalloc_section_memmap() to populate_section_memmap() mm/hotplug: prepare shrink_{zone, pgdat}_span for sub-section removal mm/sparsemem: add helpers track active portions of a section at boot mm/sparsemem: introduce a SECTION_IS_EARLY flag mm/sparsemem: introduce struct mem_section_usage drivers/base/memory.c: get rid of find_memory_block_hinted() mm/memory_hotplug: move and simplify walk_memory_blocks() mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of pfns mm: make register_mem_sect_under_node() static ... 19 July 2019, 16:45:58 UTC
6d54ceb Eiichi Tsukata 30 June 2019, 08:54:38 UTC tracing: Fix user stack trace "??" output Commit c5c27a0a5838 ("x86/stacktrace: Remove the pointless ULONG_MAX marker") removes ULONG_MAX marker from user stack trace entries but trace_user_stack_print() still uses the marker and it outputs unnecessary "??". For example: less-1911 [001] d..2 34.758944: <user stack trace> => <00007f16f2295910> => ?? => ?? => ?? => ?? => ?? => ?? => ?? The user stack trace code zeroes the storage before saving the stack, so if the trace is shorter than the maximum number of entries it can terminate the print loop if a zero entry is detected. Link: http://lkml.kernel.org/r/20190630085438.25545-1-devel@etsukata.com Cc: stable@vger.kernel.org Fixes: 4285f2fcef80 ("tracing: Remove the ULONG_MAX stack trace hackery") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 19 July 2019, 16:12:39 UTC
449fa54 Fugang Duan 19 July 2019, 09:26:48 UTC dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device dma_map_sg() may use swiotlb buffer when the kernel command line includes "swiotlb=force" or the dma_addr is out of dev->dma_mask range. After DMA complete the memory moving from device to memory, then user call dma_sync_sg_for_cpu() to sync with DMA buffer, and copy the original virtual buffer to other space. So dma_direct_sync_sg_for_cpu() should use swiotlb physical addr, not the original physical addr from sg_phys(sg). dma_direct_sync_sg_for_device() also has the same issue, correct it as well. Fixes: 55897af63091("dma-direct: merge swiotlb_dma_ops into the dma_direct code") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 19 July 2019, 12:09:40 UTC
771a081 Hui Wang 19 July 2019, 09:38:58 UTC Input: alps - fix a mismatch between a condition check and its comment In the function alps_is_cs19_trackpoint(), we check if the param[1] is in the 0x20~0x2f range, but the code we wrote for this checking is not correct: (param[1] & 0x20) does not mean param[1] is in the range of 0x20~0x2f, it also means the param[1] is in the range of 0x30~0x3f, 0x60~0x6f... Now fix it with a new condition checking ((param[1] & 0xf0) == 0x20). Fixes: 7e4935ccc323 ("Input: alps - don't handle ALPS cs19 trackpoint-only device") Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 19 July 2019, 09:40:35 UTC
49e6979 YueHaibing 16 July 2019, 18:17:20 UTC Input: psmouse - fix build error of multiple definition trackpoint_detect() should be static inline while CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails: drivers/input/mouse/alps.o: In function `trackpoint_detect': alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect' drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 55e3d9224b60 ("Input: psmouse - allow disabing certain protocol extensions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 19 July 2019, 08:58:50 UTC
d56fef0 Mao Wenan 16 July 2019, 18:16:28 UTC Input: applespi - remove set but not used variables 'sts' Fixes gcc '-Wunused-but-set-variable' warning: drivers/input/keyboard/applespi.c: In function applespi_set_bl_level: drivers/input/keyboard/applespi.c:902:6: warning: variable sts set but not used [-Wunused-but-set-variable] Fixes: b426ac0452093d ("Input: add Apple SPI keyboard and trackpad driver") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 19 July 2019, 08:58:49 UTC
038b1a0 Ronald Tschalär 15 July 2019, 17:30:11 UTC Input: add Apple SPI keyboard and trackpad driver The keyboard and trackpad on recent MacBook's (since 8,1) and MacBookPro's (13,* and 14,*) are attached to an SPI controller instead of USB, as previously. The higher level protocol is not publicly documented and hence has been reverse engineered. As a consequence there are still a number of unknown fields and commands. However, the known parts have been working well and received extensive testing and use. In order for this driver to work, the proper SPI drivers need to be loaded too; for MB8,1 these are spi_pxa2xx_platform and spi_pxa2xx_pci; for all others they are spi_pxa2xx_platform and intel_lpss_pci. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=108331 Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 19 July 2019, 08:58:34 UTC
e320ab3 Dexuan Cui 19 July 2019, 03:22:35 UTC x86/hyper-v: Zero out the VP ASSIST PAGE on allocation The VP ASSIST PAGE is an "overlay" page (see Hyper-V TLFS's Section 5.2.1 "GPA Overlay Pages" for the details) and here is an excerpt: "The hypervisor defines several special pages that "overlay" the guest's Guest Physical Addresses (GPA) space. Overlays are addressed GPA but are not included in the normal GPA map maintained internally by the hypervisor. Conceptually, they exist in a separate map that overlays the GPA map. If a page within the GPA space is overlaid, any SPA page mapped to the GPA page is effectively "obscured" and generally unreachable by the virtual processor through processor memory accesses. If an overlay page is disabled, the underlying GPA page is "uncovered", and an existing mapping becomes accessible to the guest." SPA = System Physical Address = the final real physical address. When a CPU (e.g. CPU1) is onlined, hv_cpu_init() allocates the VP ASSIST PAGE and enables the EOI optimization for this CPU by writing the MSR HV_X64_MSR_VP_ASSIST_PAGE. From now on, hvp->apic_assist belongs to the special SPA page, and this CPU *always* uses hvp->apic_assist (which is shared with the hypervisor) to decide if it needs to write the EOI MSR. When a CPU is offlined then on the outgoing CPU: 1. hv_cpu_die() disables the EOI optimizaton for this CPU, and from now on hvp->apic_assist belongs to the original "normal" SPA page; 2. the remaining work of stopping this CPU is done 3. this CPU is completely stopped. Between 1 and 3, this CPU can still receive interrupts (e.g. reschedule IPIs from CPU0, and Local APIC timer interrupts), and this CPU *must* write the EOI MSR for every interrupt received, otherwise the hypervisor may not deliver further interrupts, which may be needed to completely stop the CPU. So, after the EOI optimization is disabled in hv_cpu_die(), it's required that the hvp->apic_assist's bit0 is zero, which is not guaranteed by the current allocation mode because it lacks __GFP_ZERO. As a consequence the bit might be set and interrupt handling would not write the EOI MSR causing interrupt delivery to become stuck. Add the missing __GFP_ZERO to the allocation. Note 1: after the "normal" SPA page is allocted and zeroed out, neither the hypervisor nor the guest writes into the page, so the page remains with zeros. Note 2: see Section 10.3.5 "EOI Assist" for the details of the EOI optimization. When the optimization is enabled, the guest can still write the EOI MSR register irrespective of the "No EOI required" value, but that's slower than the optimized assist based variant. Fixes: ba696429d290 ("x86/hyper-v: Implement EOI assist") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/ <PU1P153MB0169B716A637FABF07433C04BFCB0@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM 19 July 2019, 07:48:15 UTC
8ee7956 Dave Airlie 19 July 2019, 07:28:10 UTC Merge branch 'linux-5.3' of git://github.com/skeggsb/linux into drm-next nouveau fixes and TU116 enablement. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5hZ3B4S9cVTPd2-Ug7dMSasLPJrWMyoDo4MOg8cbXWkA@mail.gmail.com 19 July 2019, 07:28:38 UTC
9fb7dc7 Dave Airlie 19 July 2019, 07:21:48 UTC Merge tag 'drm-next-5.3-2019-07-18' of git://people.freedesktop.org/~agd5f/linux into drm-next drm-next-5.3-2019-07-18: amdgpu: - Navi DC fix for secondary adapters - Fix Navi flickering with high res panels - Navi SMU fixes - Vega20 SMU fixes - Fixes for audio hotplug on HG systems - Fix for potential integer overflows on large buffer migrations - debugfs fixes for umr - Various other small fixes amdkfd: - Apply noretry setting consistently - Fix hang in eviction - Properly clean up GWS on uninit UAPI: - clarify a comment on ctx priority Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190718211525.3374-1-alexander.deucher@amd.com 19 July 2019, 07:21:48 UTC
4d352db Ben Skeggs 02 July 2019, 06:29:40 UTC drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug Appears to be fixed by "flcn/gp102-: improve implementation of bind_context() on SEC2/GSP". Tested on GP10[24678] and GV100. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:51 UTC
5210e96 Ben Skeggs 01 July 2019, 21:52:15 UTC drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP Fixes various issues encountered while attempting to initialise ACR. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:51 UTC
09b90e2 Yongxin Liu 01 July 2019, 01:46:22 UTC drm/nouveau: fix memory leak in nouveau_conn_reset() In nouveau_conn_reset(), if connector->state is true, __drm_atomic_helper_connector_destroy_state() will be called, but the memory pointed by asyc isn't freed. Memory leak happens in the following function __drm_atomic_helper_connector_reset(), where newly allocated asyc->state will be assigned to connector->state. So using nouveau_conn_atomic_destroy_state() instead of __drm_atomic_helper_connector_destroy_state to free the "old" asyc. Here the is the log showing memory leak. unreferenced object 0xffff8c5480483c80 (size 192): comm "kworker/0:2", pid 188, jiffies 4294695279 (age 53.179s) hex dump (first 32 bytes): 00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00 ...{T........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0 [<00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau] [<000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau] [<00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau] [<000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau] [<00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau] [<00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau] [<000000007e961c3e>] local_pci_probe+0x47/0xa0 [<00000000da14d569>] work_for_cpu_fn+0x1a/0x30 [<0000000028da4805>] process_one_work+0x27c/0x660 [<000000001d415b04>] worker_thread+0x22b/0x3f0 [<0000000003b69f1f>] kthread+0x12f/0x150 [<00000000c94c29b7>] ret_from_fork+0x3a/0x50 Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:51 UTC
d304654 Ralph Campbell 14 June 2019, 20:20:03 UTC drm/nouveau/dmem: missing mutex_lock in error path In nouveau_dmem_pages_alloc(), the drm->dmem->mutex is unlocked before calling nouveau_dmem_chunk_alloc() as shown when CONFIG_PROVE_LOCKING is enabled: [ 1294.871933] ===================================== [ 1294.876656] WARNING: bad unlock balance detected! [ 1294.881375] 5.2.0-rc3+ #5 Not tainted [ 1294.885048] ------------------------------------- [ 1294.889773] test-malloc-vra/6299 is trying to release lock (&drm->dmem->mutex) at: [ 1294.897482] [<ffffffffa01a220f>] nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1294.905782] but there are no more locks to release! [ 1294.910690] [ 1294.910690] other info that might help us debug this: [ 1294.917249] 1 lock held by test-malloc-vra/6299: [ 1294.921881] #0: 0000000016e10454 (&mm->mmap_sem#2){++++}, at: nouveau_svmm_bind+0x142/0x210 [nouveau] [ 1294.931313] [ 1294.931313] stack backtrace: [ 1294.935702] CPU: 4 PID: 6299 Comm: test-malloc-vra Not tainted 5.2.0-rc3+ #5 [ 1294.942786] Hardware name: ASUS X299-A/PRIME X299-A, BIOS 1401 05/21/2018 [ 1294.949590] Call Trace: [ 1294.952059] dump_stack+0x7c/0xc0 [ 1294.955469] ? nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1294.962213] print_unlock_imbalance_bug.cold.52+0xca/0xcf [ 1294.967641] lock_release+0x306/0x380 [ 1294.971383] ? nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1294.978089] ? lock_downgrade+0x2d0/0x2d0 [ 1294.982121] ? find_held_lock+0xac/0xd0 [ 1294.985979] __mutex_unlock_slowpath+0x8f/0x3f0 [ 1294.990540] ? wait_for_completion+0x230/0x230 [ 1294.995002] ? rwlock_bug.part.2+0x60/0x60 [ 1294.999197] nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1295.005751] ? page_mapping+0x98/0x110 [ 1295.009511] migrate_vma+0xa74/0x1090 [ 1295.013186] ? move_to_new_page+0x480/0x480 [ 1295.017400] ? __kmalloc+0x153/0x300 [ 1295.021052] ? nouveau_dmem_migrate_vma+0xd8/0x1e0 [nouveau] [ 1295.026796] nouveau_dmem_migrate_vma+0x157/0x1e0 [nouveau] [ 1295.032466] ? nouveau_dmem_init+0x490/0x490 [nouveau] [ 1295.037612] ? vmacache_find+0xc2/0x110 [ 1295.041537] nouveau_svmm_bind+0x1b4/0x210 [nouveau] [ 1295.046583] ? nouveau_svm_fault+0x13e0/0x13e0 [nouveau] [ 1295.051912] drm_ioctl_kernel+0x14d/0x1a0 [ 1295.055930] ? drm_setversion+0x330/0x330 [ 1295.059971] drm_ioctl+0x308/0x530 [ 1295.063384] ? drm_version+0x150/0x150 [ 1295.067153] ? find_held_lock+0xac/0xd0 [ 1295.070996] ? __pm_runtime_resume+0x3f/0xa0 [ 1295.075285] ? mark_held_locks+0x29/0xa0 [ 1295.079230] ? _raw_spin_unlock_irqrestore+0x3c/0x50 [ 1295.084232] ? lockdep_hardirqs_on+0x17d/0x250 [ 1295.088768] nouveau_drm_ioctl+0x9a/0x100 [nouveau] [ 1295.093661] do_vfs_ioctl+0x137/0x9a0 [ 1295.097341] ? ioctl_preallocate+0x140/0x140 [ 1295.101623] ? match_held_lock+0x1b/0x230 [ 1295.105646] ? match_held_lock+0x1b/0x230 [ 1295.109660] ? find_held_lock+0xac/0xd0 [ 1295.113512] ? __do_page_fault+0x324/0x630 [ 1295.117617] ? lock_downgrade+0x2d0/0x2d0 [ 1295.121648] ? mark_held_locks+0x79/0xa0 [ 1295.125583] ? handle_mm_fault+0x352/0x430 [ 1295.129687] ksys_ioctl+0x60/0x90 [ 1295.133020] ? mark_held_locks+0x29/0xa0 [ 1295.136964] __x64_sys_ioctl+0x3d/0x50 [ 1295.140726] do_syscall_64+0x68/0x250 [ 1295.144400] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1295.149465] RIP: 0033:0x7f1a3495809b [ 1295.153053] Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48 [ 1295.171850] RSP: 002b:00007ffef7ed1358 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 1295.179451] RAX: ffffffffffffffda RBX: 00007ffef7ed1628 RCX: 00007f1a3495809b [ 1295.186601] RDX: 00007ffef7ed13b0 RSI: 0000000040406449 RDI: 0000000000000004 [ 1295.193759] RBP: 00007ffef7ed13b0 R08: 0000000000000000 R09: 000000000157e770 [ 1295.200917] R10: 000000000151c010 R11: 0000000000000246 R12: 0000000040406449 [ 1295.208083] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000 Reacquire the lock before continuing to the next page. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:51 UTC
68bf8b5 Karol Herbst 18 June 2019, 11:01:33 UTC drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads fixes bogus values userspace gets from hwmon while the GPU is powered down Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Rhys Kidd <rhyskidd@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:51 UTC
b0f84a8 Ben Skeggs 05 July 2019, 05:11:42 UTC drm/nouveau: fix bogus GPL-2 license header The bulk SPDX addition made all these files into GPL-2.0 licensed files. However the remainder of the project is MIT-licensed, these files were simply missing the boiler plate and got caught up in the global update. Fixes: 96ac6d4351004 (treewide: Add SPDX license identifier - Kbuild) Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:51 UTC
b7019ac Ilia Mirkin 20 June 2019, 00:13:43 UTC drm/nouveau: fix bogus GPL-2 license header The bulk SPDX addition made all these files into GPL-2.0 licensed files. However the remainder of the project is MIT-licensed, these files (primarily header files) were simply missing the boiler plate and got caught up in the global update. Fixes: b24413180f5 (License cleanup: add SPDX GPL-2.0 license identifier to files with no license) Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:50 UTC
7cb95ee Lyude Paul 26 June 2019, 18:10:27 UTC drm/nouveau/i2c: Enable i2c pads & busses during preinit It turns out that while disabling i2c bus access from software when the GPU is suspended was a step in the right direction with: commit 342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") We also ended up accidentally breaking the vbios init scripts on some older Tesla GPUs, as apparently said scripts can actually use the i2c bus. Since these scripts are executed before initializing any subdevices, we end up failing to acquire access to the i2c bus which has left a number of cards with their fan controllers uninitialized. Luckily this doesn't break hardware - it just means the fan gets stuck at 100%. This also means that we've always been using our i2c busses before initializing them during the init scripts for older GPUs, we just didn't notice it until we started preventing them from being used until init. It's pretty impressive this never caused us any issues before! So, fix this by initializing our i2c pad and busses during subdev pre-init. We skip initializing aux busses during pre-init, as those are guaranteed to only ever be used by nouveau for DP aux transactions. Signed-off-by: Lyude Paul <lyude@redhat.com> Tested-by: Marc Meledandri <m.meledandri@gmail.com> Fixes: 342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:50 UTC
3485b7b Ben Skeggs 18 June 2019, 08:40:16 UTC drm/nouveau/disp/tu102-: wire up scdc parameter setter Regs seem valid here still, and tested on TU116. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:50 UTC
75dec32 Ben Skeggs 17 June 2019, 02:52:48 UTC drm/nouveau/core: recognise TU116 chipset Modesetting only, still waiting on ACR/GR firmware from NVIDIA for Turing graphics/compute bring-up. Each subsystem was compared with traces, along with various tests to check that things generally work as they should, and appears compatible enough with the current TU117 code to enable support. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:50 UTC
d108418 Ben Skeggs 28 May 2019, 23:58:18 UTC drm/nouveau/kms: disallow dual-link harder if hdmi connection detected The fallthrough cases (pre-Fermi) would accidentally allow dual-link pixel clocks even where they shouldn't be. This leads to a high resolution HDMI displays, connected via a DVI->HDMI adapter, to fail on the original NV50. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:50 UTC
533f475 Ilia Mirkin 25 May 2019, 22:41:49 UTC drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling Previously center scaling would get scaling applied to it (when it was only supposed to center the image), and aspect-corrected scaling did not always correctly pick whether to reduce width or height for a particular combination of inputs/outputs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:50 UTC
f8d6211 Ilia Mirkin 25 May 2019, 22:41:48 UTC drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes Higher layers tend to add a lot of modes not actually in the EDID, such as the standard DMT modes. Changing this would be extremely intrusive to everyone, so just force the scaler more often. There are no practical cases we're aware of where a LVDS/eDP panel has multiple resolutions exposed, and i915 already does it this way. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:50 UTC
bb2b407 Timo Wiren 22 May 2019, 17:01:06 UTC drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89. Fix a crash or broken depth testing in all OpenGL applications that use the depth buffer on MCP89 (GeForce 320M) seen on a MacBook Pro Late 2010. The bug is tracked in https://bugs.freedesktop.org/show_bug.cgi?id=108500 Signed-off-by: Timo Wiren <timo.wiren@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 19 July 2019, 06:26:50 UTC
bdfeb0c Guo Ren 28 June 2019, 12:39:46 UTC csky: Fixup abiv1 memset error Current memset implementation in abiv1 is wrong and it'll cause unalign access. Just remove it and use the generic one. This patch will cause performance degradation and we will improve it with a new design in next patchset. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> 19 July 2019, 06:21:36 UTC
4e562c1 Guo Ren 18 June 2019, 12:34:35 UTC csky: Improve tlb operation with help of asid There are two generations of tlb operation instruction for C-SKY. First generation is use mcr register and it need software do more things, second generation is use specific instructions, eg: tlbi.va, tlbi.vas, tlbi.alls We implemented the following functions: - flush_tlb_range (a range of entries) - flush_tlb_page (one entry) Above functions use asid from vma->mm to invalid tlb entries and we could use tlbi.vas instruction for newest generation csky cpu. - flush_tlb_kernel_range - flush_tlb_one Above functions don't care asid and it invalid the tlb entries only with vpn and we could use tlbi.vaas instruction for newest generat- ion csky cpu. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> 19 July 2019, 06:21:36 UTC
22d55f0 Guo Ren 18 June 2019, 12:33:32 UTC csky: Use generic asid algorithm to implement switch_mm Use linux generic asid/vmid algorithm to implement csky switch_mm function. The algorithm is from arm and it could work with SMP system. It'll help reduce tlb flush for switch_mm in task/vm switch. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> 19 July 2019, 06:21:36 UTC
a231b88 Guo Ren 18 June 2019, 12:06:52 UTC csky: Add new asid lib code from arm This patch only contains asid help code from arm for next patch to use. The asid allocator use five level check to reduce the cost of switch_mm. 1. Check if the asid version is the same (it's general) 2. Check reserved_asid which is set in rollover flush_context() and key point is to keep the same bit position with the current asid version instead of input version. 3. Check if the position of bitmap is free then it could be set & used directly. 4. find_next_zero_bit() (a little performance cost) 5. flush_context (this is the worst cost with increase current asid version) Check is level by level and cost is also higher with the next level. The reserved_asid and bitmap mechanism prevent unnecessary find_next_zero_bit(). The atomic 64 bit asid is also suitable for 32-bit system and it won't cost a lot in 1th 2th 3th level check. The operation of set/clear mm_cpumask was removed in arm64 compared to arm32. It seems no side effect on current arm64 system, but from software meaning it's wrong. Although csky also needn't it, we add it back for csky. The asid_per_ctxt is no use for csky and it reserves the lowest bits for other use, maybe: trust zone ? Ok, just keep it in csky copy. Seems it also could be used by other archs and it's worth to move asid code to generic in future. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Julien Grall <julien.grall@arm.com> 19 July 2019, 06:21:36 UTC
9d35dc3 Guo Ren 18 June 2019, 09:20:10 UTC csky: Revert mmu ASID mechanism Current C-SKY ASID mechanism is from mips and it doesn't work well with multi-cores. ASID per core mechanism is not suitable for C-SKY SMP tlb maintain operations, eg: tlbi.vas need share the same asid in all processors and it'll invalid the tlb entry in all cores with the same asid. This patch is prepare for new ASID mechanism. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> 19 July 2019, 06:21:36 UTC
4d58103 Mao Han 04 June 2019, 10:54:47 UTC dt-bindings: csky: Add csky PMU bindings This patch adds the documentation to describe that how to add pmu node in dts. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> 19 July 2019, 06:21:36 UTC
69d812f Guo Ren 06 June 2019, 07:37:32 UTC dt-bindings: interrupt-controller: Update csky mpintc Add trigger type setting for csky,mpintc. The driver also could support #interrupt-cells <1> and it wouldn't invalidate existing DTs. Here we only show the complete format. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Rob Herring <robh+dt@kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> 19 July 2019, 06:21:36 UTC
e753419 Guo Ren 04 June 2019, 10:54:48 UTC csky: Fixup some error count in 810 & 860. CK810 pmu only support event with index 0-8 and 0xd; CK860 only support event 1~4, 0xa~0x1b. So do not register unsupport event to hardware cache event, which may leader to unknown behavior. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com> 19 July 2019, 06:21:36 UTC
d41435d Mao Han 04 June 2019, 10:54:49 UTC csky: Fix perf record in kernel/user space csky_pmu_event_init is called several times during the perf record initialzation. After configure the event counter in either kernel space or user space, csky_pmu_event_init is called twice with no attr specified. Configuration will be overwritten with sampling in both kernel space and user space. --all-kernel/--all-user is useless without this patch applied. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org> 19 July 2019, 06:21:36 UTC
f622fbf Mao Han 04 June 2019, 10:54:46 UTC csky: Add pmu interrupt support This patch add interrupt request and handler for csky pmu. perf can record on hardware event with this patch applied. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org> 19 July 2019, 06:21:36 UTC
ccffa1a Mao Han 04 June 2019, 10:54:45 UTC csky: Add count-width property for csky pmu The csky pmu counter may have different io width. When the counter is smaller then 64 bits and counter value is smaller than the old value, it will result to a extremely large delta value. So the sampled value should be extend to 64 bits to avoid this, the extension bits base on the count-width property from dts. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org> 19 July 2019, 06:21:36 UTC
f132076 Mao Han 04 June 2019, 10:54:44 UTC csky: Init pmu as a device This patch change the csky pmu initialization from arch init to device init. The pmu can be configued with information from device tree(pmu device name, irq number and etc.). Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@kernel.org> 19 July 2019, 06:21:36 UTC
3158d28 Guo Ren 10 May 2019, 09:07:01 UTC csky: Fixup no panic in kernel for some traps These traps couldn't be hanppen in kernel and we must panic there not send a signal to userspace. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> 19 July 2019, 06:21:36 UTC
1994cc4 Guo Ren 10 May 2019, 04:57:27 UTC csky: Select intc & timer drivers Let arch help to select interrupt controller's and timer's drivers instead of people using menuconfig to select. This help the mini system boot up. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> 19 July 2019, 06:21:36 UTC
8d650cd Eric Dumazet 19 July 2019, 02:28:14 UTC tcp: fix tcp_set_congestion_control() use from bpf hook Neal reported incorrect use of ns_capable() from bpf hook. bpf_setsockopt(...TCP_CONGESTION...) -> tcp_set_congestion_control() -> ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN) -> ns_capable_common() -> current_cred() -> rcu_dereference_protected(current->cred, 1) Accessing 'current' in bpf context makes no sense, since packets are processed from softirq context. As Neal stated : The capability check in tcp_set_congestion_control() was written assuming a system call context, and then was reused from a BPF call site. The fix is to add a new parameter to tcp_set_congestion_control(), so that the ns_capable() call is only performed under the right context. Fixes: 91b5b21c7c16 ("bpf: Add support for changing congestion control") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Lawrence Brakmo <brakmo@fb.com> Reported-by: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 July 2019, 03:33:48 UTC
269b7c5 Wei Yongjun 19 July 2019, 01:22:06 UTC ag71xx: fix return value check in ag71xx_probe() In case of error, the function of_get_mac_address() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> 19 July 2019, 03:33:48 UTC
6f5fa8d Wei Yongjun 19 July 2019, 01:21:57 UTC ag71xx: fix error return code in ag71xx_probe() Fix to return error code -ENOMEM from the dmam_alloc_coherent() error handling case instead of 0, as done elsewhere in this function. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> 19 July 2019, 03:33:48 UTC
eec4844 Matteo Croce 18 July 2019, 22:58:50 UTC proc/sysctl: add shared variables for range check In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 July 2019, 00:08:07 UTC
3710969 Keith Busch 18 July 2019, 22:58:46 UTC mm: migrate: remove unused mode argument migrate_page_move_mapping() doesn't use the mode argument. Remove it and update callers accordingly. Link: http://lkml.kernel.org/r/20190508210301.8472-1-keith.busch@intel.com Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 July 2019, 00:08:07 UTC
9a84503 Dan Williams 18 July 2019, 22:58:43 UTC mm/sparsemem: cleanup 'section number' data types David points out that there is a mixture of 'int' and 'unsigned long' usage for section number data types. Update the memory hotplug path to use 'unsigned long' consistently for section numbers. [akpm@linux-foundation.org: fix printk format] Link: http://lkml.kernel.org/r/156107543656.1329419.11505835211949439815.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 July 2019, 00:08:07 UTC
a361919 Dan Williams 18 July 2019, 22:58:40 UTC libnvdimm/pfn: stop padding pmem namespaces to section alignment Now that the mm core supports section-unaligned hotplug of ZONE_DEVICE memory, we no longer need to add padding at pfn/dax device creation time. The kernel will still honor padding established by older kernels. Link: http://lkml.kernel.org/r/156092356588.979959.6793371748950931916.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Jeff Moyer <jmoyer@redhat.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [ppc64] Cc: David Hildenbrand <david@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 July 2019, 00:08:07 UTC
back to top