Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
f74c2bb Linus Torvalds 08 September 2019, 20:33:15 UTC Linux 5.3-rc8 08 September 2019, 20:33:15 UTC
983f700 Linus Torvalds 08 September 2019, 16:34:55 UTC Merge tag 'compiler-attributes-for-linus-v5.3-rc8' of git://github.com/ojeda/linux Pull section attribute fix from Miguel Ojeda: "Fix Oops in Clang-compiled kernels (Nick Desaulniers)" * tag 'compiler-attributes-for-linus-v5.3-rc8' of git://github.com/ojeda/linux: include/linux/compiler.h: fix Oops for Clang-compiled kernels 08 September 2019, 16:34:55 UTC
def8b72 Linus Torvalds 08 September 2019, 16:30:31 UTC Merge tag 'gpio-v5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "All related to the PCA953x driver when handling chips with more than 8 ports, now that works again" * tag 'gpio-v5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: use pca953x_read_regs instead of regmap_bulk_read gpio: pca953x: correct type of reg_direction 08 September 2019, 16:30:31 UTC
bfafddd Nick Desaulniers 28 August 2019, 22:55:23 UTC include/linux/compiler.h: fix Oops for Clang-compiled kernels GCC unescapes escaped string section names while Clang does not. Because __section uses the `#` stringification operator for the section name, it doesn't need to be escaped. This fixes an Oops observed in distro's that use systemd and not net.core.bpf_jit_enable=1, when their kernels are compiled with Clang. Link: https://github.com/ClangBuiltLinux/linux/issues/619 Link: https://bugs.llvm.org/show_bug.cgi?id=42950 Link: https://marc.info/?l=linux-netdev&m=156412960619946&w=2 Link: https://lore.kernel.org/lkml/20190904181740.GA19688@gmail.com/ Acked-by: Will Deacon <will@kernel.org> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> [Cherry-picked from the __section cleanup series for 5.3] [Adjusted commit message] Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> 08 September 2019, 12:53:58 UTC
950b07c Linus Torvalds 07 September 2019, 21:25:54 UTC Revert "x86/apic: Include the LDR when clearing out APIC registers" This reverts commit 558682b5291937a70748d36fd9ba757fb25b99ae. Chris Wilson reports that it breaks his CPU hotplug test scripts. In particular, it breaks offlining and then re-onlining the boot CPU, which we treat specially (and the BIOS does too). The symptoms are that we can offline the CPU, but it then does not come back online again: smpboot: CPU 0 is now offline smpboot: Booting Node 0 Processor 0 APIC 0x0 smpboot: do_boot_cpu failed(-1) to wakeup CPU#0 Thomas says he knows why it's broken (my personal suspicion: our magic handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix is to just revert it, since we've never touched the LDR bits before, and it's not worth the risk to do anything else at this stage. [ Hotpluging of the boot CPU is special anyway, and should be off by default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the cpu0_hotplug kernel parameter. In general you should not do it, and it has various known limitations (hibernate and suspend require the boot CPU, for example). But it should work, even if the boot CPU is special and needs careful treatment - Linus ] Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/ Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bandan Das <bsd@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 September 2019, 21:25:54 UTC
b3a9964 Linus Torvalds 07 September 2019, 18:48:28 UTC Merge tag 'char-misc-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull Documentation updates from Greg KH: "A few small patches for the documenation file that came in through the char-misc tree in -rc7 for your tree. They fix the mistake in the .rst format that kept the table of companies from showing up in the html output, and most importantly, add people's names to the list showing support for our process" * tag 'char-misc-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/process: Add Qualcomm process ambassador for hardware security issues Documentation/process/embargoed-hardware-issues: Microsoft ambassador Documentation/process: Add Google contact for embargoed hardware issues Documentation/process: Volunteer as the ambassador for Xen 07 September 2019, 18:48:28 UTC
a8e0aba Trilok Soni 06 September 2019, 19:01:57 UTC Documentation/process: Add Qualcomm process ambassador for hardware security issues Add Trilok Soni as process ambassador for hardware security issues from Qualcomm. Signed-off-by: Trilok Soni <tsoni@codeaurora.org> Link: https://lore.kernel.org/r/1567796517-8964-1-git-send-email-tsoni@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 September 2019, 17:30:54 UTC
d3464cc Linus Torvalds 07 September 2019, 17:00:34 UTC Merge tag 'dmaengine-fix-5.3' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Some late fixes for drivers: - memory leak in ti crossbar dma driver - cleanup of omap dma probe - Fix for link list configuration in sprd dma driver - Handling fixed for DMACHCLR if iommu is mapped in rcar dma" * tag 'dmaengine-fix-5.3' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: rcar-dmac: Fix DMACHCLR handling if iommu is mapped dmaengine: sprd: Fix the DMA link-list configuration dmaengine: ti: omap-dma: Add cleanup in omap_dma_probe() dmaengine: ti: dma-crossbar: Fix a memory leak bug 07 September 2019, 17:00:34 UTC
1e3778c Linus Torvalds 06 September 2019, 23:18:43 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "Just a single lpfc fix adjusting the number of available queues for high CPU count systems" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Raise config max for lpfc_fcp_mq_threshold variable 06 September 2019, 23:18:43 UTC
7641033 Linus Torvalds 06 September 2019, 23:14:32 UTC Merge tag 'libnvdimm-fix-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Dan Williams: "Restore support for 1GB alignment namespaces, truncate the end of misaligned namespaces" * tag 'libnvdimm-fix-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/pfn: Fix namespace creation on misaligned addresses 06 September 2019, 23:14:32 UTC
9772152 Linus Torvalds 06 September 2019, 23:12:30 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "A tiny update from Benjamin removing a mistakenly added Elan PNP ID so that the device is again handled by hid-multitouch" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - remove Lenovo Legion Y7000 PnpID 06 September 2019, 23:12:30 UTC
0c043d7 Benjamin Tissoires 06 September 2019, 19:02:32 UTC Input: elan_i2c - remove Lenovo Legion Y7000 PnpID Looks like the Bios of the Lenovo Legion Y7000 is using ELAN061B when the actual device is supposed to be used with hid-multitouch. Remove it from the list of the supported device, hoping that no one will complain about the loss in functionality. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203467 Fixes: 738c06d0e456 ("Input: elan_i2c - add hardware ID for multiple Lenovo laptops") Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 06 September 2019, 22:40:22 UTC
36daa83 Linus Torvalds 06 September 2019, 19:53:31 UTC Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are three more fixes for this week: - The Windows-on-ARM laptops require a workaround to prevent crashing at boot from ACPI - The Renesas 'draak' board needs one bugfix for the backlight regulator - Also for Renesas, the 'hihope' board accidentally had its eMMC turned off in the 5.3 merge window" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: qcom: geni: Provide parameter error checking arm64: dts: renesas: hihope-common: Fix eMMC status arm64: dts: renesas: r8a77995: draak: Fix backlight regulator name 06 September 2019, 19:53:31 UTC
30d7030 Linus Torvalds 06 September 2019, 19:44:08 UTC Merge tag 'configfs-for-5.3' of git://git.infradead.org/users/hch/configfs Pull configfs fixes from Christoph Hellwig: "Late configfs fixes from Al that fix pretty nasty removal vs attribute access races" * tag 'configfs-for-5.3' of git://git.infradead.org/users/hch/configfs: configfs: provide exclusion between IO and removals configfs: new object reprsenting tree fragments configfs_register_group() shouldn't be (and isn't) called in rmdirable parts configfs: stash the data we need into configfs_buffer at open time 06 September 2019, 19:44:08 UTC
76f5e9f Linus Torvalds 06 September 2019, 19:22:36 UTC Merge tag 'iommu-fixes-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Revert an Intel VT-d patch that caused problems for some users. - Removal of a feature in the Intel VT-d driver that was never supported in hardware. This qualifies as a fix because the code for this feature sets reserved bits in the invalidation queue descriptor, causing failed invalidations on real hardware. - Two fixes for AMD IOMMU driver to fix a race condition and to add a missing IOTLB flush when kernel is booted in kdump mode. * tag 'iommu-fixes-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix race in increase_address_space() iommu/amd: Flush old domains in kdump kernel iommu/vt-d: Remove global page flush support Revert "iommu/vt-d: Avoid duplicated pci dma alias consideration" 06 September 2019, 19:22:36 UTC
0445971 Linus Torvalds 06 September 2019, 16:01:49 UTC Merge tag 'mmc-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "Revert in order to fix card init for some eMMCs that need retries for CMD6" * tag 'mmc-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: Revert "mmc: core: do not retry CMD6 in __mmc_switch()" 06 September 2019, 16:01:49 UTC
08d433d Linus Torvalds 06 September 2019, 15:58:19 UTC Merge tag 'drm-fixes-2019-09-06' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Live from my friend's couch in Barcelona, latest round of drm fixes. The command line parser regression fixes look a bit larger because they come with selftests included for the bugs they fix. Otherwise a single nouveau, single ingenic and single vmwgfx fix: nouveau: - add missing MODULE_FIRMWARE definitions igenic: - hardcode panel type DPI vmwgfx: - double free fix core: - command line mode parser fixes" * tag 'drm-fixes-2019-09-06' of git://anongit.freedesktop.org/drm/drm: drm/vmwgfx: Fix double free in vmw_recv_msg() drm/nouveau/sec2/gp102: add missing MODULE_FIRMWAREs drm/selftests: modes: Add more unit tests for the cmdline parser drm/modes: Introduce a whitelist for the named modes drm/modes: Fix the command line parser to take force options into account drm/modes: Add a switch to differentiate free standing options drm/ingenic: Hardcode panel type to DPI 06 September 2019, 15:58:19 UTC
9d098a6 Linus Torvalds 06 September 2019, 15:56:06 UTC Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael Tsirkin: "virtio, vhost, and balloon bugfixes. A couple of last minute bugfixes. And a revert of a failed attempt at metadata access optimization - we'll try again in the next cycle" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: mm/balloon_compaction: suppress allocation warnings Revert "vhost: access vq metadata through kernel virtual address" vhost: Remove unnecessary variable virtio-net: lower min ring num_free for efficiency vhost/test: fix build for vhost test vhost/test: fix build for vhost test 06 September 2019, 15:56:06 UTC
13da6ac Linus Torvalds 06 September 2019, 15:54:45 UTC Merge tag 'powerpc-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a boot hang on some Freescale machines when PREEMPT is enabled. Two CVE fixes for bugs in our handling of FP registers and transactional memory, both of which can result in corrupted FP state, or FP state leaking between processes. Thanks to: Chris Packham, Christophe Leroy, Gustavo Romero, Michael Neuling" * tag 'powerpc-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/tm: Fix restoring FP/VMX facility incorrectly on interrupts powerpc/tm: Fix FP/VMX unavailable exceptions inside a transaction powerpc/64e: Drop stale call to smp_processor_id() which hangs SMP startup 06 September 2019, 15:54:45 UTC
1f49316 Sasha Levin 06 September 2019, 09:58:52 UTC Documentation/process/embargoed-hardware-issues: Microsoft ambassador Add Sasha Levin as Microsoft's process ambassador. Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/r/20190906095852.23568-1-sashal@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 06 September 2019, 10:11:09 UTC
8928e91 Lee Jones 05 September 2019, 08:25:55 UTC soc: qcom: geni: Provide parameter error checking When booting with ACPI, the Geni Serial Engine is not set as the I2C/SPI parent and thus, the wrapper (parent device) is unassigned. This causes the kernel to crash with a null dereference error. Link: https://lore.kernel.org/r/20190905082555.15020-1-lee.jones@linaro.org Fixes: 8bc529b25354 ("soc: qcom: geni: Add support for ACPI") Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 06 September 2019, 09:08:08 UTC
754265b Joerg Roedel 06 September 2019, 08:39:54 UTC iommu/amd: Fix race in increase_address_space() After the conversion to lock-less dma-api call the increase_address_space() function can be called without any locking. Multiple CPUs could potentially race for increasing the address space, leading to invalid domain->mode settings and invalid page-tables. This has been happening in the wild under high IO load and memory pressure. Fix the race by locking this operation. The function is called infrequently so that this does not introduce a performance regression in the dma-api path again. Reported-by: Qian Cai <cai@lca.pw> Fixes: 256e4621c21a ('iommu/amd: Make use of the generic IOVA allocator') Signed-off-by: Joerg Roedel <jroedel@suse.de> 06 September 2019, 08:55:51 UTC
36b7200 Stuart Hayes 05 September 2019, 17:09:48 UTC iommu/amd: Flush old domains in kdump kernel When devices are attached to the amd_iommu in a kdump kernel, the old device table entries (DTEs), which were copied from the crashed kernel, will be overwritten with a new domain number. When the new DTE is written, the IOMMU is told to flush the DTE from its internal cache--but it is not told to flush the translation cache entries for the old domain number. Without this patch, AMD systems using the tg3 network driver fail when kdump tries to save the vmcore to a network system, showing network timeouts and (sometimes) IOMMU errors in the kernel log. This patch will flush IOMMU translation cache entries for the old domain when a DTE gets overwritten with a new domain number. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Fixes: 3ac3e5ee5ed5 ('iommu/amd: Copy old trans table from old kernel') Signed-off-by: Joerg Roedel <jroedel@suse.de> 06 September 2019, 08:34:30 UTC
1e19ec6 Dave Airlie 06 September 2019, 06:25:45 UTC Merge tag 'drm-misc-fixes-2019-09-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.3 final: - Make ingenic panel type DPI insteado f unknown. - Fixes for command line parser modes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/606d87b2-1840-c893-eb30-d6c471c9e50a@linux.intel.com 06 September 2019, 06:27:46 UTC
7610bb0 Dave Airlie 06 September 2019, 06:23:25 UTC Merge branch 'vmwgfx-fixes-5.3' of git://people.freedesktop.org/~thomash/linux into drm-fixes Single vmwgfx double free fix. Signed-off-by: Dave Airlie <airlied@redhat.com> 06 September 2019, 06:24:56 UTC
d41a3ef Hillf Danton 02 September 2019, 12:37:29 UTC keys: Fix missing null pointer check in request_key_auth_describe() If a request_key authentication token key gets revoked, there's a window in which request_key_auth_describe() can see it with a NULL payload - but it makes no check for this and something like the following oops may occur: BUG: Kernel NULL pointer dereference at 0x00000038 Faulting instruction address: 0xc0000000004ddf30 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [...] request_key_auth_describe+0x90/0xd0 LR [...] request_key_auth_describe+0x54/0xd0 Call Trace: [...] request_key_auth_describe+0x54/0xd0 (unreliable) [...] proc_keys_show+0x308/0x4c0 [...] seq_read+0x3d0/0x540 [...] proc_reg_read+0x90/0x110 [...] __vfs_read+0x3c/0x70 [...] vfs_read+0xb4/0x1b0 [...] ksys_read+0x7c/0x130 [...] system_call+0x5c/0x70 Fix this by checking for a NULL pointer when describing such a key. Also make the read routine check for a NULL pointer to be on the safe side. [DH: Modified to not take already-held rcu lock and modified to also check in the read routine] Fixes: 04c567d9313e ("[PATCH] Keys: Fix race between two instantiators of a key") Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2019, 21:19:25 UTC
a3f5e1f Linus Torvalds 05 September 2019, 17:26:20 UTC Merge tag 'sound-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small HD-audio fixes: - A regression fix for Realtek codecs due to the recent initialization procedure change - A fix for potential endless loop at the quirk table lookup - Quirks for Lenovo, ASUS and HP machines" * tag 'sound-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix the problem of two front mics on a ThinkCentre ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL ALSA: hda/realtek - Add quirk for HP Pavilion 15 ALSA: hda/realtek - Fix overridden device-specific initialization ALSA: hda - Fix potential endless loop at applying quirks 05 September 2019, 17:26:20 UTC
19e4147 Linus Torvalds 05 September 2019, 16:47:32 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - EFI boot fix for signed kernels - an AC flags fix related to UBSAN - Hyper-V infinite loop fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyper-v: Fix overflow bug in fill_gva_list() x86/uaccess: Don't leak the AC flags into __get_user() argument evaluation x86/boot: Preserve boot_params.secure_boot from sanitizing 05 September 2019, 16:47:32 UTC
262f7ee Linus Torvalds 05 September 2019, 16:38:31 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "This fixes an ABI bug introduced this cycle, plus fixes a throttling bug" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix uclamp ABI bug, clean up and robustify sched_read_attr() ABI logic and code sched/fair: Don't assign runtime for throttled cfs_rq 05 September 2019, 16:38:31 UTC
13133f9 Linus Torvalds 05 September 2019, 16:23:02 UTC Merge tag 'clang-format-for-linus-v5.3-rc8' of git://github.com/ojeda/linux Pull clang-format update from Miguel Ojeda: "Update with the latest for_each macro list" * tag 'clang-format-for-linus-v5.3-rc8' of git://github.com/ojeda/linux: clang-format: Update with the latest for_each macro list 05 September 2019, 16:23:02 UTC
13212a6 Arnd Bergmann 05 September 2019, 15:56:29 UTC Merge tag 'renesas-fixes2-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes Second Round of Renesas ARM Based SoC Fixes for v5.3 * RZ/G2M based HiHope main board - Re-enabled accidently disabled SDHI3 (eMMC) support * tag 'renesas-fixes2-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: hihope-common: Fix eMMC status Link: https://lore.kernel.org/r/cover.1567675986.git.horms+renesas@verge.net.au Signed-off-by: Arnd Bergmann <arnd@arndb.de> 05 September 2019, 15:56:30 UTC
08b0c89 Dan Carpenter 15 August 2019, 08:30:50 UTC drm/vmwgfx: Fix double free in vmw_recv_msg() We recently added a kfree() after the end of the loop: if (retries == RETRIES) { kfree(reply); return -EINVAL; } There are two problems. First the test is wrong and because retries equals RETRIES if we succeed on the last iteration through the loop. Second if we fail on the last iteration through the loop then the kfree is a double free. When you're reading this code, please note the break statement at the end of the while loop. This patch changes the loop so that if it's not successful then "reply" is NULL and we can test for that afterward. Cc: <stable@vger.kernel.org> Fixes: 6b7c3b86f0b6 ("drm/vmwgfx: fix memory leak when too many retries have occurred") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> 05 September 2019, 12:44:28 UTC
f56f791 Kees Cook 04 September 2019, 16:24:49 UTC Documentation/process: Add Google contact for embargoed hardware issues This adds myself as the Google contact for embargoed hardware security issues and fixes some small typos. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matt Linton <amuse@google.com> Cc: Matthew Garrett <mjg59@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/201909040922.56496BF70@keescook Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 05 September 2019, 05:43:34 UTC
02e740a Andrew Cooper 04 September 2019, 18:17:02 UTC Documentation/process: Volunteer as the ambassador for Xen Cc: Jonathan Corbet <corbet@lwn.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Link: https://lore.kernel.org/r/20190904181702.19788-1-andrew.cooper3@citrix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 05 September 2019, 05:43:30 UTC
b0841ee Al Viro 31 August 2019, 07:43:43 UTC configfs: provide exclusion between IO and removals Make sure that attribute methods are not called after the item has been removed from the tree. To do so, we * at the point of no return in removals, grab ->frag_sem exclusive and mark the fragment dead. * call the methods of attributes with ->frag_sem taken shared and only after having verified that the fragment is still alive. The main benefit is for method instances - they are guaranteed that the objects they are accessing *and* all ancestors are still there. Another win is that we don't need to bother with extra refcount on config_item when opening a file - the item will be alive for as long as it stays in the tree, and we won't touch it/attributes/any associated data after it's been removed from the tree. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> 04 September 2019, 20:33:51 UTC
3b47fd5 Linus Torvalds 04 September 2019, 18:09:53 UTC Merge tag 'nfs-for-5.3-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfix from Trond Myklebust: "Regression fix inode fileid checks in attribute revalidation code" * tag 'nfs-for-5.3-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix inode fileid checks in attribute revalidation code 04 September 2019, 18:09:53 UTC
1251201 Ingo Molnar 04 September 2019, 07:55:32 UTC sched/core: Fix uclamp ABI bug, clean up and robustify sched_read_attr() ABI logic and code Thadeu Lima de Souza Cascardo reported that 'chrt' broke on recent kernels: $ chrt -p $$ chrt: failed to get pid 26306's policy: Argument list too long and he has root-caused the bug to the following commit increasing sched_attr size and breaking sched_read_attr() into returning -EFBIG: a509a7cd7974 ("sched/uclamp: Extend sched_setattr() to support utilization clamping") The other, bigger bug is that the whole sched_getattr() and sched_read_attr() logic of checking non-zero bits in new ABI components is arguably broken, and pretty much any extension of the ABI will spuriously break the ABI. That's way too fragile. Instead implement the perf syscall's extensible ABI instead, which we already implement on the sched_setattr() side: - if user-attributes have the same size as kernel attributes then the logic is unchanged. - if user-attributes are larger than the kernel knows about then simply skip the extra bits, but set attr->size to the (smaller) kernel size so that tooling can (in principle) handle older kernel as well. - if user-attributes are smaller than the kernel knows about then just copy whatever user-space can accept. Also clean up the whole logic: - Simplify the code flow - there's no need for 'ret' for example. - Standardize on 'kattr/uattr' and 'ksize/usize' naming to make sure we always know which side we are dealing with. - Why is it called 'read' when what it does is to copy to user? This code is so far away from VFS read() semantics that the naming is actively confusing. Name it sched_attr_copy_to_user() instead, which mirrors other copy_to_user() functionality. - Move the attr->size assignment from the head of sched_getattr() to the sched_attr_copy_to_user() function. Nothing else within the kernel should care about the size of the structure. With these fixes the sched_getattr() syscall now nicely supports an extensible ABI in both a forward and backward compatible fashion, and will also fix the chrt bug. As an added bonus the bogus -EFBIG return is removed as well, which as Thadeu noted should have been -E2BIG to begin with. Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Patrick Bellasi <patrick.bellasi@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: a509a7cd7974 ("sched/uclamp: Extend sched_setattr() to support utilization clamping") Link: https://lkml.kernel.org/r/20190904075532.GA26751@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 04 September 2019, 17:51:30 UTC
d9a2b63 Arnd Bergmann 04 September 2019, 12:38:34 UTC Merge tag 'renesas-fixes-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes Renesas ARM Based SoC Fixes for v5.3 * R-Car D3 (r8a77995) based Draak Board - Correct backlight regulator name in device tree * tag 'renesas-fixes-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a77995: draak: Fix backlight regulator name Signed-off-by: Arnd Bergmann <arnd@arndb.de> 04 September 2019, 12:38:47 UTC
a8318c1 Gustavo Romero 04 September 2019, 04:55:28 UTC powerpc/tm: Fix restoring FP/VMX facility incorrectly on interrupts When in userspace and MSR FP=0 the hardware FP state is unrelated to the current process. This is extended for transactions where if tbegin is run with FP=0, the hardware checkpoint FP state will also be unrelated to the current process. Due to this, we need to ensure this hardware checkpoint is updated with the correct state before we enable FP for this process. Unfortunately we get this wrong when returning to a process from a hardware interrupt. A process that starts a transaction with FP=0 can take an interrupt. When the kernel returns back to that process, we change to FP=1 but with hardware checkpoint FP state not updated. If this transaction is then rolled back, the FP registers now contain the wrong state. The process looks like this: Userspace: Kernel Start userspace with MSR FP=0 TM=1 < ----- ... tbegin bne Hardware interrupt ---- > <do_IRQ...> .... ret_from_except restore_math() /* sees FP=0 */ restore_fp() tm_active_with_fp() /* sees FP=1 (Incorrect) */ load_fp_state() FP = 0 -> 1 < ----- Return to userspace with MSR TM=1 FP=1 with junk in the FP TM checkpoint TM rollback reads FP junk When returning from the hardware exception, tm_active_with_fp() is incorrectly making restore_fp() call load_fp_state() which is setting FP=1. The fix is to remove tm_active_with_fp(). tm_active_with_fp() is attempting to handle the case where FP state has been changed inside a transaction. In this case the checkpointed and transactional FP state is different and hence we must restore the FP state (ie. we can't do lazy FP restore inside a transaction that's used FP). It's safe to remove tm_active_with_fp() as this case is handled by restore_tm_state(). restore_tm_state() detects if FP has been using inside a transaction and will set load_fp and call restore_math() to ensure the FP state (checkpoint and transaction) is restored. This is a data integrity problem for the current process as the FP registers are corrupted. It's also a security problem as the FP registers from one process may be leaked to another. Similarly for VMX. A simple testcase to replicate this will be posted to tools/testing/selftests/powerpc/tm/tm-poison.c This fixes CVE-2019-15031. Fixes: a7771176b439 ("powerpc: Don't enable FP/Altivec if not checkpointed") Cc: stable@vger.kernel.org # 4.15+ Signed-off-by: Gustavo Romero <gromero@linux.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190904045529.23002-2-gromero@linux.vnet.ibm.com 04 September 2019, 12:31:13 UTC
8205d5d Gustavo Romero 04 September 2019, 04:55:27 UTC powerpc/tm: Fix FP/VMX unavailable exceptions inside a transaction When we take an FP unavailable exception in a transaction we have to account for the hardware FP TM checkpointed registers being incorrect. In this case for this process we know the current and checkpointed FP registers must be the same (since FP wasn't used inside the transaction) hence in the thread_struct we copy the current FP registers to the checkpointed ones. This copy is done in tm_reclaim_thread(). We use thread->ckpt_regs.msr to determine if FP was on when in userspace. thread->ckpt_regs.msr represents the state of the MSR when exiting userspace. This is setup by check_if_tm_restore_required(). Unfortunatley there is an optimisation in giveup_all() which returns early if tsk->thread.regs->msr (via local variable `usermsr`) has FP=VEC=VSX=SPE=0. This optimisation means that check_if_tm_restore_required() is not called and hence thread->ckpt_regs.msr is not updated and will contain an old value. This can happen if due to load_fp=255 we start a userspace process with MSR FP=1 and then we are context switched out. In this case thread->ckpt_regs.msr will contain FP=1. If that same process is then context switched in and load_fp overflows, MSR will have FP=0. If that process now enters a transaction and does an FP instruction, the FP unavailable will not update thread->ckpt_regs.msr (the bug) and MSR FP=1 will be retained in thread->ckpt_regs.msr. tm_reclaim_thread() will then not perform the required memcpy and the checkpointed FP regs in the thread struct will contain the wrong values. The code path for this happening is: Userspace: Kernel Start userspace with MSR FP/VEC/VSX/SPE=0 TM=1 < ----- ... tbegin bne fp instruction FP unavailable ---- > fp_unavailable_tm() tm_reclaim_current() tm_reclaim_thread() giveup_all() return early since FP/VMX/VSX=0 /* ckpt MSR not updated (Incorrect) */ tm_reclaim() /* thread_struct ckpt FP regs contain junk (OK) */ /* Sees ckpt MSR FP=1 (Incorrect) */ no memcpy() performed /* thread_struct ckpt FP regs not fixed (Incorrect) */ tm_recheckpoint() /* Put junk in hardware checkpoint FP regs */ .... < ----- Return to userspace with MSR TM=1 FP=1 with junk in the FP TM checkpoint TM rollback reads FP junk This is a data integrity problem for the current process as the FP registers are corrupted. It's also a security problem as the FP registers from one process may be leaked to another. This patch moves up check_if_tm_restore_required() in giveup_all() to ensure thread->ckpt_regs.msr is updated correctly. A simple testcase to replicate this will be posted to tools/testing/selftests/powerpc/tm/tm-poison.c Similarly for VMX. This fixes CVE-2019-15030. Fixes: f48e91e87e67 ("powerpc/tm: Fix FP and VMX register corruption") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190904045529.23002-1-gromero@linux.vnet.ibm.com 04 September 2019, 12:31:13 UTC
02fa5d7 Nadav Amit 20 August 2019, 09:16:46 UTC mm/balloon_compaction: suppress allocation warnings There is no reason to print warnings when balloon page allocation fails, as they are expected and can be handled gracefully. Since VMware balloon now uses balloon-compaction infrastructure, and suppressed these warnings before, it is also beneficial to suppress these warnings to keep the same behavior that the balloon had before. Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> 04 September 2019, 11:42:01 UTC
3d2c7d3 Michael S. Tsirkin 10 August 2019, 17:53:21 UTC Revert "vhost: access vq metadata through kernel virtual address" This reverts commit 7f466032dc ("vhost: access vq metadata through kernel virtual address"). The commit caused a bunch of issues, and while commit 73f628ec9e ("vhost: disable metadata prefetch optimization") disabled the optimization it's not nice to keep lots of dead code around. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 04 September 2019, 11:39:48 UTC
896fc24 Yunsheng Lin 20 August 2019, 12:36:32 UTC vhost: Remove unnecessary variable It is unnecessary to use ret variable to return the error code, just return the error code directly. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 04 September 2019, 10:21:17 UTC
718be6b ? jiang 20 August 2019, 02:51:23 UTC virtio-net: lower min ring num_free for efficiency This change lowers ring buffer reclaim threshold from 1/2*queue to budget for better performance. According to our test with qemu + dpdk, packet dropping happens when the guest is not able to provide free buffer in avail ring timely with default 1/2*queue. The value in the patch has been tested and does show better performance. Test setup: iperf3 to generate packets to guest (total 30mins, pps 400k, UDP) avg packets drop before: 2842 avg packets drop after: 360(-87.3%) Further, current code suffers from a starvation problem: the amount of work done by try_fill_recv is not bounded by the budget parameter, thus (with large queues) once in a while userspace gets blocked for a long time while queue is being refilled. Trigger refills earlier to make sure the amount of work to do is limited. Signed-off-by: jiangkidd <jiangkidd@hotmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> 04 September 2019, 10:21:17 UTC
264b563 Tiwei Bie 28 August 2019, 05:37:00 UTC vhost/test: fix build for vhost test Since vhost_exceeds_weight() was introduced, callers need to specify the packet weight and byte weight in vhost_dev_init(). Note that, the packet weight isn't counted in this patch to keep the original behavior unchanged. Fixes: e82b9b0727ff ("vhost: introduce vhost_exceeds_weight()") Cc: stable@vger.kernel.org Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> 04 September 2019, 10:21:17 UTC
93d2c4d Tiwei Bie 28 August 2019, 05:36:59 UTC vhost/test: fix build for vhost test Since below commit, callers need to specify the iov_limit in vhost_dev_init() explicitly. Fixes: b46a0bf78ad7 ("vhost: fix OOB in get_rx_bufs()") Cc: stable@vger.kernel.org Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> 04 September 2019, 10:21:17 UTC
2a36c16 Hui Wang 04 September 2019, 05:53:27 UTC ALSA: hda/realtek - Fix the problem of two front mics on a ThinkCentre This ThinkCentre machine has a new realtek codec alc222, it is not in the support list, we add it in the realtek.c then this machine can apply FIXUPs for the realtek codec. And this machine has two front mics which can't be handled by PA so far, it uses the pin 0x18 and 0x19 as the front mics, as a result the existing FIXUP ALC294_FIXUP_LENOVO_MIC_LOCATION doesn't work on this machine. Fortunately another FIXUP ALC283_FIXUP_HEADSET_MIC also can change the location for one of the two mics on this machine. Link: https://lore.kernel.org/r/20190904055327.9883-1-hui.wang@canonical.com Signed-off-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 04 September 2019, 06:36:57 UTC
cf24aac Yoshihiro Shimoda 02 September 2019, 11:44:03 UTC dmaengine: rcar-dmac: Fix DMACHCLR handling if iommu is mapped The commit 20c169aceb45 ("dmaengine: rcar-dmac: clear pertinence number of channels") forgets to clear the last channel by DMACHCLR in rcar_dmac_init() (and doesn't need to clear the first channel) if iommu is mapped to the device. So, this patch fixes it by using "channels_mask" bitfield. Note that the hardware and driver don't support more than 32 bits in DMACHCLR register anyway, so this patch should reject more than 32 channels in rcar_dmac_parse_of(). Fixes: 20c169aceb459575 ("dmaengine: rcar-dmac: clear pertinence number of channels") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1567424643-26629-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org> 04 September 2019, 06:05:58 UTC
689379c Baolin Wang 30 August 2019, 07:37:45 UTC dmaengine: sprd: Fix the DMA link-list configuration For the Spreadtrum DMA link-list mode, when the DMA engine got a slave hardware request, which will trigger the DMA engine to load the DMA configuration from the link-list memory automatically. But before the slave hardware request, the slave will get an incorrect residue due to the first node used to trigger the link-list was configured as the last source address and destination address. Thus we should make sure the first node was configured the start source address and destination address, which can fix this issue. Fixes: 4ac695464763 ("dmaengine: sprd: Support DMA link-list mode") Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/77868edb7aff9d5cb12ac3af8827ef2e244441a6.1567150471.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 04 September 2019, 05:55:38 UTC
8ad8e02 Jan Kaisrlik 20 August 2019, 11:42:29 UTC Revert "mmc: core: do not retry CMD6 in __mmc_switch()" Turns out the commit 3a0681c7448b ("mmc: core: do not retry CMD6 in __mmc_switch()") breaks initialization of a Toshiba THGBMNG5 eMMC card, when using the meson-gx-mmc.c driver on a custom board based on Amlogic A113D. The CMD6 that switches the card into HS200 mode is then one that fails and according to the below printed messages from the log: [ 1.648951] mmc0: mmc_select_hs200 failed, error -84 [ 1.648988] mmc0: error -84 whilst initialising MMC card After some analyze, it turns out that adding a delay of ~5ms inside mmc_select_bus_width() but after mmc_compare_ext_csds() has been executed, also fixes the problem. Adding yet some more debug code, trying to figure out if potentially the card could be in a busy state, both by using CMD13 and ->card_busy() ops concluded that this was not the case. Therefore, let's simply revert the commit that dropped support for retrying of CMD6, as this also fixes the problem. Fixes: 3a0681c7448b ("mmc: core: do not retry CMD6 in __mmc_switch()") Cc: stable@vger.kernel.org Signed-off-by: Jan Kaisrlik <ja.kaisrlik@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 03 September 2019, 14:53:28 UTC
8744daf Jacob Pan 26 August 2019, 15:53:29 UTC iommu/vt-d: Remove global page flush support Global pages support is removed from VT-d spec 3.0. Since global pages G flag only affects first-level paging structures and because DMA request with PASID are only supported by VT-d spec. 3.0 and onward, we can safely remove global pages support. For kernel shared virtual address IOTLB invalidation, PASID granularity and page selective within PASID will be used. There is no global granularity supported. Without this fix, IOTLB invalidation will cause invalid descriptor error in the queued invalidation (QI) interface. Fixes: 1c4f88b7f1f9 ("iommu/vt-d: Shared virtual address in scalable mode") Reported-by: Sanjay K Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> 03 September 2019, 13:01:27 UTC
b0dfce9 Dave Airlie 03 September 2019, 07:03:35 UTC Merge branch 'linux-5.3' of git://github.com/skeggsb/linux into drm-fixes Single nouveau firmware fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5uGLgDY8V8pWgEH0-YhkCEgvHE=NZ1W_m0gJaoFPuQ0g@mail.gmail.com 03 September 2019, 07:07:00 UTC
5e2d2cc Liangyan 26 August 2019, 12:16:33 UTC sched/fair: Don't assign runtime for throttled cfs_rq do_sched_cfs_period_timer() will refill cfs_b runtime and call distribute_cfs_runtime to unthrottle cfs_rq, sometimes cfs_b->runtime will allocate all quota to one cfs_rq incorrectly, then other cfs_rqs attached to this cfs_b can't get runtime and will be throttled. We find that one throttled cfs_rq has non-negative cfs_rq->runtime_remaining and cause an unexpetced cast from s64 to u64 in snippet: distribute_cfs_runtime() { runtime = -cfs_rq->runtime_remaining + 1; } The runtime here will change to a large number and consume all cfs_b->runtime in this cfs_b period. According to Ben Segall, the throttled cfs_rq can have account_cfs_rq_runtime called on it because it is throttled before idle_balance, and the idle_balance calls update_rq_clock to add time that is accounted to the task. This commit prevents cfs_rq to be assgined new runtime if it has been throttled until that distribute_cfs_runtime is called. Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: shanpeic@linux.alibaba.com Cc: stable@vger.kernel.org Cc: xlpang@linux.alibaba.com Fixes: d3d9dc330236 ("sched: Throttle entities exceeding their allowed bandwidth") Link: https://lkml.kernel.org/r/20190826121633.6538-1-liangyan.peng@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 03 September 2019, 06:55:07 UTC
60083f9 Jian-Hong Pan 02 September 2019, 10:00:56 UTC ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL Original pin node values of ASUS UX431FL with ALC294: 0x12 0xb7a60140 0x13 0x40000000 0x14 0x90170110 0x15 0x411111f0 0x16 0x411111f0 0x17 0x90170111 0x18 0x411111f0 0x19 0x411111f0 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x4066852d 0x1e 0x411111f0 0x1f 0x411111f0 0x21 0x04211020 1. Has duplicated internal speakers (0x14 & 0x17) which makes the output route become confused. So, the output volume cannot be changed by setting. 2. Misses the headset mic pin node. This patch disables the confusing speaker (NID 0x14) and enables the headset mic (NID 0x19). Link: https://lore.kernel.org/r/20190902100054.6941-1-jian-hong@endlessm.com Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 September 2019, 05:46:01 UTC
47320fb Al Viro 25 August 2019, 23:56:13 UTC configfs: new object reprsenting tree fragments Refcounted, hangs of configfs_dirent, created by operations that add fragments to configfs tree (mkdir and configfs_register_{subsystem,group}). Will be used in the next commit to provide exclusion between fragment removal and ->show/->store calls. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> 02 September 2019, 20:10:44 UTC
f19e4ed Al Viro 30 August 2019, 03:13:30 UTC configfs_register_group() shouldn't be (and isn't) called in rmdirable parts revert cc57c07343bd "configfs: fix registered group removal" It was an attempt to handle something that fundamentally doesn't work - configfs_register_group() should never be done in a part of tree that can be rmdir'ed. And in mainline it never had been, so let's not borrow trouble; the fix was racy anyway, it would take a lot more to make that work and desired semantics is not clear. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> 02 September 2019, 20:10:44 UTC
ff4dd08 Al Viro 30 August 2019, 15:30:03 UTC configfs: stash the data we need into configfs_buffer at open time simplifies the ->read()/->write()/->release() instances nicely Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> 02 September 2019, 20:10:43 UTC
4030b4c Tianyu Lan 02 September 2019, 12:41:43 UTC x86/hyper-v: Fix overflow bug in fill_gva_list() When the 'start' parameter is >= 0xFF000000 on 32-bit systems, or >= 0xFFFFFFFF'FF000000 on 64-bit systems, fill_gva_list() gets into an infinite loop. With such inputs, 'cur' overflows after adding HV_TLB_FLUSH_UNIT and always compares as less than end. Memory is filled with guest virtual addresses until the system crashes. Fix this by never incrementing 'cur' to be larger than 'end'. Reported-by: Jong Hyun Park <park.jonghyun@yonsei.ac.kr> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 2ffd9e33ce4a ("x86/hyper-v: Use hypercall for remote TLB flush") Signed-off-by: Ingo Molnar <mingo@kernel.org> 02 September 2019, 17:57:19 UTC
eb3d8f4 Trond Myklebust 28 August 2019, 15:26:13 UTC NFS: Fix inode fileid checks in attribute revalidation code We want to throw out the attrbute if it refers to the mounted on fileid, and not the real fileid. However we do not want to block cache consistency updates from NFSv4 writes. Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Fixes: 7e10cc25bfa0 ("NFS: Don't refresh attributes with mounted-on-file...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> 02 September 2019, 17:10:19 UTC
089cf7f Linus Torvalds 02 September 2019, 16:57:40 UTC Linux 5.3-rc7 02 September 2019, 16:57:40 UTC
49ffdb4 Linus Torvalds 02 September 2019, 16:30:34 UTC Merge tag 'char-misc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for reported issues for 5.3-rc7 Also included in here is the documentation for how we are handling hardware issues under embargo that everyone has finally agreed on, as well as a MAINTAINERS update for the suckers who agreed to handle the LICENSES/ files. All of these have been in linux-next last week with no reported issues" * tag 'char-misc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: fsi: scom: Don't abort operations for minor errors vmw_balloon: Fix offline page marking with compaction VMCI: Release resource if the work is already queued Documentation/process: Embargoed hardware security issues lkdtm/bugs: fix build error in lkdtm_EXHAUST_STACK mei: me: add Tiger Lake point LP device ID intel_th: pci: Add Tiger Lake support intel_th: pci: Add support for another Lewisburg PCH stm class: Fix a double free of stm_source_device MAINTAINERS: add entry for LICENSES and SPDX stuff fpga: altera-ps-spi: Fix getting of optional confd gpio 02 September 2019, 16:30:34 UTC
2c248f9 Linus Torvalds 02 September 2019, 16:15:30 UTC Merge tag 'usb-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes that have been in linux-next this past week for 5.3-rc7 They fix the usual xhci, syzbot reports, and other small issues that have come up last week. All have been in linux-next with no reported issues" * tag 'usb-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: cdc-wdm: fix race between write and disconnect due to flag abuse usb: host: xhci: rcar: Fix typo in compatible string matching usb: host: xhci-tegra: Set DMA mask correctly USB: storage: ums-realtek: Whitelist auto-delink support USB: storage: ums-realtek: Update module parameter description for auto_delink_en usb: host: ohci: fix a race condition between shutdown and irq usb: hcd: use managed device resources typec: tcpm: fix a typo in the comparison of pdo_max_voltage usb-storage: Add new JMS567 revision to unusual_devs usb: chipidea: udc: don't do hardware access if gadget has stopped usbtmc: more sanity checking for packet size usb: udc: lpc32xx: silence fall-through warning 02 September 2019, 16:15:30 UTC
d33cd42 Sam Bazley 01 September 2019, 02:31:30 UTC ALSA: hda/realtek - Add quirk for HP Pavilion 15 HP Pavilion 15 (AMD Ryzen-based model) with 103c:84e7 needs the same quirk like HP Envy/Spectre x360 for enabling the mute LED over Mic3 pin. [ rearranged in the SSID number order by tiwai ] Signed-off-by: Sam Bazley <sambazley@fastmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 September 2019, 15:25:04 UTC
9b8bd47 Peter Zijlstra 29 August 2019, 08:24:45 UTC x86/uaccess: Don't leak the AC flags into __get_user() argument evaluation Identical to __put_user(); the __get_user() argument evalution will too leak UBSAN crud into the __uaccess_begin() / __uaccess_end() region. While uncommon this was observed to happen for: drivers/xen/gntdev.c: if (__get_user(old_status, batch->status[i])) where UBSAN added array bound checking. This complements commit: 6ae865615fc4 ("x86/uaccess: Dont leak the AC flag into __put_user() argument evaluation") Tested-by Sedat Dilek <sedat.dilek@gmail.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: broonie@kernel.org Cc: sfr@canb.auug.org.au Cc: akpm@linux-foundation.org Cc: Randy Dunlap <rdunlap@infradead.org> Cc: mhocko@suse.cz Cc: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20190829082445.GM2369@hirez.programming.kicks-ass.net 02 September 2019, 12:22:38 UTC
29d9a0b John S. Gruber 01 September 2019, 22:00:54 UTC x86/boot: Preserve boot_params.secure_boot from sanitizing Commit a90118c445cc ("x86/boot: Save fields explicitly, zero out everything else") now zeroes the secure boot setting information (enabled/disabled/...) passed by the boot loader or by the kernel's EFI handover mechanism. The problem manifests itself with signed kernels using the EFI handoff protocol with grub and the kernel loses the information whether secure boot is enabled in the firmware, i.e., the log message "Secure boot enabled" becomes "Secure boot could not be determined". efi_main() arch/x86/boot/compressed/eboot.c sets this field early but it is subsequently zeroed by the above referenced commit. Include boot_params.secure_boot in the preserve field list. [ bp: restructure commit message and massage. ] Fixes: a90118c445cc ("x86/boot: Save fields explicitly, zero out everything else") Signed-off-by: John S. Gruber <JohnSGruber@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Mark Brown <broonie@kernel.org> Cc: stable <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/CAPotdmSPExAuQcy9iAHqX3js_fc4mMLQOTr5RBGvizyCOPcTQQ@mail.gmail.com 02 September 2019, 07:17:45 UTC
55f7e5c Ben Skeggs 02 September 2019, 06:33:22 UTC drm/nouveau/sec2/gp102: add missing MODULE_FIRMWAREs Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org [v5.2+] 02 September 2019, 06:35:51 UTC
345464f Linus Torvalds 02 September 2019, 01:45:28 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from David Miller: 1) Fix some length checks during OGM processing in batman-adv, from Sven Eckelmann. 2) Fix regression that caused netfilter conntrack sysctls to not be per-netns any more. From Florian Westphal. 3) Use after free in netpoll, from Feng Sun. 4) Guard destruction of pfifo_fast per-cpu qdisc stats with qdisc_is_percpu_stats(), from Davide Caratti. Similar bug is fixed in pfifo_fast_enqueue(). 5) Fix memory leak in mld_del_delrec(), from Eric Dumazet. 6) Handle neigh events on internal ports correctly in nfp, from John Hurley. 7) Clear SKB timestamp in NF flow table code so that it does not confuse fq scheduler. From Florian Westphal. 8) taprio destroy can crash if it is invoked in a failure path of taprio_init(), because the list head isn't setup properly yet and the list del is unconditional. Perform the list add earlier to address this. From Vladimir Oltean. 9) Make sure to reapply vlan filters on device up, in aquantia driver. From Dmitry Bogdanov. 10) sgiseeq driver releases DMA memory using free_page() instead of dma_free_attrs(). From Christophe JAILLET. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) net: seeq: Fix the function used to release some memory in an error handling path enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions net: bcmgenet: use ethtool_op_get_ts_info() tc-testing: don't hardcode 'ip' in nsPlugin.py net: dsa: microchip: add KSZ8563 compatibility string dt-bindings: net: dsa: document additional Microchip KSZ8563 switch net: aquantia: fix out of memory condition on rx side net: aquantia: linkstate irq should be oneshot net: aquantia: reapply vlan filters on up net: aquantia: fix limit of vlan filters net: aquantia: fix removal of vlan 0 net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte taprio: Fix kernel panic in taprio_destroy net: dsa: microchip: fill regmap_config name rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2] net: stmmac: dwmac-rk: Don't fail if phy regulator is absent amd-xgbe: Fix error path in xgbe_mod_init() netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder mac80211: Correctly set noencrypt for PAE frames ... 02 September 2019, 01:45:28 UTC
e1e54ec Christophe JAILLET 31 August 2019, 07:17:51 UTC net: seeq: Fix the function used to release some memory in an error handling path In commit 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv"), a call to 'get_zeroed_page()' has been turned into a call to 'dma_alloc_coherent()'. Only the remove function has been updated to turn the corresponding 'free_page()' into 'dma_free_attrs()'. The error hndling path of the probe function has not been updated. Fix it now. Rename the corresponding label to something more in line. Fixes: 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 19:10:11 UTC
9f159ae Linus Torvalds 01 September 2019, 18:21:57 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Fix the bogus detection of 32bit user mode for uretprobes which caused corruption of the user return address resulting in application crashes. In the uprobes handler in_ia32_syscall() is obviously always returning false on a 64bit kernel. Use user_64bit_mode() instead which works correctly. - Prevent large page splitting when ftrace flips RW/RO on the kernel text which caused iTLB performance issues. Ftrace wants to be converted to text_poke() which avoids the problem, but for now allow large page preservation in the static protections check when the change request spawns a full large page. - Prevent arch_dynirq_lower_bound() from returning 0 when the IOAPIC is configured via device tree. In the device tree case the GSI 1:1 mapping is meaningless therefore the lower bound which protects the GSI range on ACPI machines is irrelevant. Return the lower bound which the core hands to the function instead of blindly returning 0 which causes the core to allocate the invalid virtual interupt number 0 which in turn prevents all drivers from allocating and requesting an interrupt. - Remove the bogus initialization of LDR and DFR in the 32bit bigsmp APIC driver. That uses physical destination mode where LDR/DFR are ignored, but the initialization and the missing clear of LDR caused the APIC to be left in a inconsistent state on kexec/reboot. - Clear LDR when clearing the APIC registers so the APIC is in a well defined state. - Initialize variables proper in the find_trampoline_placement() code. - Silence GCC( build warning for the real mode part of the build" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/cpa: Prevent large page split when ftrace flips RW on kernel text x86/build: Add -Wnoaddress-of-packed-member to REALMODE_CFLAGS, to silence GCC9 build warning x86/boot/compressed/64: Fix missing initialization in find_trampoline_placement() x86/apic: Include the LDR when clearing out APIC registers x86/apic: Do not initialize LDR and DFR for bigsmp uprobes/x86: Fix detection of 32-bit user mode x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines 01 September 2019, 18:21:57 UTC
5fb181c Linus Torvalds 01 September 2019, 18:09:42 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Two fixes for perf x86 hardware implementations: - Restrict the period on Nehalem machines to prevent perf from hogging the CPU - Prevent the AMD IBS driver from overwriting the hardwre controlled and pre-seeded reserved bits (0-6) in the count register which caused a sample bias for dispatched micro-ops" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/ibs: Fix sample bias for dispatched micro-ops perf/x86/intel: Restrict period on Nehalem 01 September 2019, 18:09:42 UTC
5358e6e Linus Torvalds 01 September 2019, 17:39:25 UTC Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: "User-space turbostat (and x86_energy_perf_policy) patches. They are primarily bug fixes from users" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPL tools/power turbostat: Fix caller parameter of get_tdp_amd() tools/power turbostat: Fix CPU%C1 display value tools/power turbostat: do not enforce 1ms tools/power turbostat: read from pipes too tools/power turbostat: Add Ice Lake NNPI support tools/power turbostat: rename has_hsw_msrs() tools/power turbostat: Fix Haswell Core systems tools/power turbostat: add Jacobsville support tools/power turbostat: fix buffer overrun tools/power turbostat: fix file descriptor leaks tools/power turbostat: fix leak of file descriptor on error return path tools/power turbostat: Make interval calculation per thread to reduce jitter tools/power turbostat: remove duplicate pc10 column tools/power x86_energy_perf_policy: Fix argument parsing tools/power: Fix typo in man page tools/power/x86: Enable compiler optimisations and Fortify by default tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2 01 September 2019, 17:39:25 UTC
dd7078f Christophe JAILLET 30 August 2019, 20:23:12 UTC enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions Call to 'pci_free_irq_vectors()' are missing both in the error handling path of the probe function, and in the remove function. Add them. Fixes: 19971f5ea0ab ("enetc: add PTP clock driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 06:53:17 UTC
dd1bf47 Ryan M. Collins 30 August 2019, 18:49:55 UTC net: bcmgenet: use ethtool_op_get_ts_info() This change enables the use of SW timestamping on the Raspberry Pi 4. bcmgenet's transmit function bcmgenet_xmit() implements software timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using ethtool_ops bcmgenet_ethtool_ops() as get_ts_info(), the SOF_TIMESTAMPING_TX_SOFTWARE capability is announced. Similar to commit a8f5cb9e7991 ("smsc95xx: use ethtool_op_get_ts_info()") Signed-off-by: Ryan M. Collins <rmc032@bucknell.edu> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 06:51:19 UTC
02a3f0d Davide Caratti 30 August 2019, 16:51:47 UTC tc-testing: don't hardcode 'ip' in nsPlugin.py the following tdc test fails on Fedora: # ./tdc.py -e 2638 -- ns/SubPlugin.__init__ Test 2638: Add matchall and try to get it -----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 clsact" -----> prepare stage *** Error message: "/bin/sh: ip: command not found" returncode 127; expected [0] -----> prepare stage *** Aborting test run. Let nsPlugin.py use the 'IP' variable introduced with commit 92c1a19e2fb9 ("tc-tests: added path to ip command in tdc"), so that the path to 'ip' is correctly resolved to the value we have in tdc_config.py. # ./tdc.py -e 2638 -- ns/SubPlugin.__init__ Test 2638: Add matchall and try to get it All test results: 1..1 ok 1 2638 - Add matchall and try to get it Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 06:47:25 UTC
3daa418 David S. Miller 01 September 2019, 06:36:37 UTC Merge branch 'net-dsa-microchip-add-KSZ8563-support' Razvan Stefanescu says: ==================== net: dsa: microchip: add KSZ8563 support This patchset adds compatibility string for the KSZ8563 switch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 06:36:37 UTC
d9033ae Razvan Stefanescu 30 August 2019, 07:52:02 UTC net: dsa: microchip: add KSZ8563 compatibility string It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 06:36:37 UTC
de5eb9e Razvan Stefanescu 30 August 2019, 07:52:01 UTC dt-bindings: net: dsa: document additional Microchip KSZ8563 switch It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 06:36:37 UTC
879c380 David S. Miller 01 September 2019, 02:07:17 UTC Merge branch 'net-aquantia-fixes-on-vlan-filters-and-other-conditions' Igor Russkikh says: ==================== net: aquantia: fixes on vlan filters and other conditions Here is a set of various bug fixes related to vlan filter offload and two other rare cases. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 02:07:17 UTC
be6cef6 Dmitry Bogdanov 30 August 2019, 12:08:38 UTC net: aquantia: fix out of memory condition on rx side On embedded environments with hard memory limits it is a normal although rare case when skb can't be allocated on rx part under high traffic. In such OOM cases napi_complete_done() was not called. So the napi object became in an invalid state like it is "scheduled". Kernel do not re-schedules the poll of that napi object. Consequently, kernel can not remove that object the system hangs on `ifconfig down` waiting for a poll. We are fixing this by gracefully closing napi poll routine with correct invocation of napi_complete_done. This was reproduced with artificially failing the allocation of skb to simulate an "out of memory" error case and check that traffic does not get stuck. Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 02:07:11 UTC
5c47e3b Igor Russkikh 30 August 2019, 12:08:36 UTC net: aquantia: linkstate irq should be oneshot Declaring threaded irq handler should also indicate the irq is oneshot. It is oneshot indeed, because HW implements irq automasking on trigger. Not declaring this causes some kernel configurations to fail on interface up, because request_threaded_irq returned an err code. The issue was originally hidden on normal x86_64 configuration with latest kernel, because depending on interrupt controller, irq driver added ONESHOT flag on its own. Issue was observed on older kernels (4.14) where no such logic exists. Fixes: 4c83f170b3ac ("net: aquantia: link status irq handling") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reported-by: Michael Symolkin <Michael.Symolkin@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 02:07:11 UTC
c2ef057 Dmitry Bogdanov 30 August 2019, 12:08:35 UTC net: aquantia: reapply vlan filters on up In case of device reconfiguration the driver may reset the device invisible for other modules, vlan module in particular. So vlans will not be removed&created and vlan filters will not be configured in the device. The patch reapplies the vlan filters at device start. Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 02:07:11 UTC
392349f Dmitry Bogdanov 30 August 2019, 12:08:33 UTC net: aquantia: fix limit of vlan filters Fix a limit condition of vlans on the interface before setting vlan promiscuous mode Fixes: 48dd73d08d4dd ("net: aquantia: fix vlans not working over bridged network") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 02:07:11 UTC
6fdc060 Dmitry Bogdanov 30 August 2019, 12:08:30 UTC net: aquantia: fix removal of vlan 0 Due to absence of checking against the rx flow rule when vlan 0 is being removed, the other rule could be removed instead of the rule with vlan 0 Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 02:07:10 UTC
154f4fb David S. Miller 01 September 2019, 01:45:35 UTC Merge branch 'Fix-issues-in-tc-taprio-and-tc-cbs' Vladimir Oltean says: ==================== Fix issues in tc-taprio and tc-cbs This series fixes one panic and one WARN_ON found in the tc-taprio qdisc, while trying to apply it: - On an interface which is not multi-queue - On an interface which has no carrier The tc-cbs was also visually found to suffer of the same issue as tc-taprio, and the fix was only compile-tested in that case. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 01:45:35 UTC
1c6c09a Vladimir Oltean 30 August 2019, 01:07:23 UTC net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate The discussion to be made is absolutely the same as in the case of previous patch ("taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte"). Nothing is lost when setting a default. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 01:45:35 UTC
f04b514 Vladimir Oltean 30 August 2019, 01:07:22 UTC taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte The taprio budget needs to be adapted at runtime according to interface link speed. But that handling is problematic. For one thing, installing a qdisc on an interface that doesn't have carrier is not illegal. But taprio prints the following stack trace: [ 31.851373] ------------[ cut here ]------------ [ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4 [ 31.864566] taprio: dequeue() called with unknown picos per byte. [ 31.864570] Modules linked in: [ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted 5.3.0-rc5-01199-g8838fe023cd6 #1689 [ 31.881398] Hardware name: Freescale LS1021A [ 31.885661] [<c03133a4>] (unwind_backtrace) from [<c030d8cc>] (show_stack+0x10/0x14) [ 31.893368] [<c030d8cc>] (show_stack) from [<c10ac958>] (dump_stack+0xb4/0xc8) [ 31.900555] [<c10ac958>] (dump_stack) from [<c0349d04>] (__warn+0xe0/0xf8) [ 31.907395] [<c0349d04>] (__warn) from [<c0349d64>] (warn_slowpath_fmt+0x48/0x6c) [ 31.914841] [<c0349d64>] (warn_slowpath_fmt) from [<c0f38db4>] (taprio_dequeue+0x1a8/0x2d4) [ 31.923150] [<c0f38db4>] (taprio_dequeue) from [<c0f227b0>] (__qdisc_run+0x90/0x61c) [ 31.930856] [<c0f227b0>] (__qdisc_run) from [<c0ec82ac>] (net_tx_action+0x12c/0x2bc) [ 31.938560] [<c0ec82ac>] (net_tx_action) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 31.946350] [<c0302298>] (__do_softirq) from [<c03502a0>] (irq_exit+0xbc/0xd8) [ 31.953536] [<c03502a0>] (irq_exit) from [<c03a4808>] (__handle_domain_irq+0x60/0xb4) [ 31.961328] [<c03a4808>] (__handle_domain_irq) from [<c0754478>] (gic_handle_irq+0x58/0x9c) [ 31.969638] [<c0754478>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68) [ 31.982100] 7b20: e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960 [ 31.990234] 7b40: 00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94 [ 31.998363] 7b60: 60070013 ffffffff [ 32.001833] [<c0301a8c>] (__irq_svc) from [<c0f46d94>] (netlink_trim+0x18/0xd8) [ 32.009104] [<c0f46d94>] (netlink_trim) from [<c0f478ec>] (netlink_broadcast_filtered+0x34/0x414) [ 32.017930] [<c0f478ec>] (netlink_broadcast_filtered) from [<c0f47cec>] (netlink_broadcast+0x20/0x28) [ 32.027102] [<c0f47cec>] (netlink_broadcast) from [<c0eea378>] (rtnetlink_send+0x34/0x88) [ 32.035238] [<c0eea378>] (rtnetlink_send) from [<c0f25890>] (notify_and_destroy+0x2c/0x44) [ 32.043461] [<c0f25890>] (notify_and_destroy) from [<c0f25e08>] (qdisc_graft+0x398/0x470) [ 32.051595] [<c0f25e08>] (qdisc_graft) from [<c0f27a00>] (tc_modify_qdisc+0x3a4/0x724) [ 32.059470] [<c0f27a00>] (tc_modify_qdisc) from [<c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec) [ 32.067864] [<c0ee4c84>] (rtnetlink_rcv_msg) from [<c0f4a988>] (netlink_rcv_skb+0xb8/0x110) [ 32.076172] [<c0f4a988>] (netlink_rcv_skb) from [<c0f4a170>] (netlink_unicast+0x1b4/0x22c) [ 32.084392] [<c0f4a170>] (netlink_unicast) from [<c0f4a5e4>] (netlink_sendmsg+0x33c/0x380) [ 32.092614] [<c0f4a5e4>] (netlink_sendmsg) from [<c0ea9f40>] (sock_sendmsg+0x14/0x24) [ 32.100403] [<c0ea9f40>] (sock_sendmsg) from [<c0eaa780>] (___sys_sendmsg+0x214/0x228) [ 32.108279] [<c0eaa780>] (___sys_sendmsg) from [<c0eabad0>] (__sys_sendmsg+0x50/0x8c) [ 32.116068] [<c0eabad0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0) [ 32.128960] 7fa0: b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000 [ 32.137093] 7fc0: b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c [ 32.145224] 7fe0: 00000070 bea14278 00530d64 b6e17e64 [ 32.150659] ---[ end trace 2139c9827c3e5177 ]--- This happens because the qdisc ->dequeue callback gets called. Which again is not illegal, the qdisc will dequeue even when the interface is up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames will be dropped further down the stack in dev_direct_xmit(). And, at the end of the day, for what? For calculating the initial budget of an interface which is non-operational at the moment and where frames will get dropped anyway. So if we can't figure out the link speed, default to SPEED_10 and move along. We can also remove the runtime check now. Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 01:45:34 UTC
efb5522 Vladimir Oltean 30 August 2019, 01:07:21 UTC taprio: Fix kernel panic in taprio_destroy taprio_init may fail earlier than this line: list_add(&q->taprio_list, &taprio_list); i.e. due to the net device not being multi queue. Attempting to remove q from the global taprio_list when it is not part of it will result in a kernel panic. Fix it by matching list_add and list_del better to one another in the order of operations. This way we can keep the deletion unconditional and with lower complexity - O(1). Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com> Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 September 2019, 01:45:34 UTC
5f81d54 George McCollister 29 August 2019, 14:14:41 UTC net: dsa: microchip: fill regmap_config name Use the register value width as the regmap_config name to prevent the following error when the second and third regmap_configs are initialized. "debugfs: Directory '${bus-id}' with parent 'regmap' already present!" Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net> 31 August 2019, 20:19:07 UTC
5b16100 David S. Miller 31 August 2019, 20:16:07 UTC Merge tag 'batadv-net-for-davem-20190830' of git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== Here are two batman-adv bugfixes: - Fix OGM and OGMv2 header read boundary check, by Sven Eckelmann (2 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 31 August 2019, 20:16:07 UTC
9eb4b51 Len Brown 31 August 2019, 18:40:39 UTC tools/power turbostat: update version number Today is 19.08.31, at least in some parts of the world. Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:39 UTC
c1c10cc Pu Wen 31 August 2019, 02:20:31 UTC tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPL Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL") and the commit 3316f99a9f1b68c578c5 ("tools/power turbostat: Also read package power on AMD F17h (Zen)") add AMD Fam 17h RAPL support. Hygon Family 18h(Dhyana) support RAPL in bit 14 of CPUID 0x80000007 EDX, and has MSRs RAPL_PWR_UNIT/CORE_ENERGY_STAT/PKG_ENERGY_STAT. So add Hygon Dhyana Family 18h support for RAPL. Already tested on Hygon multi-node systems and it shows correct per-core energy usage and the total package power. Signed-off-by: Pu Wen <puwen@hygon.cn> Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca> Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:39 UTC
9cfa8e0 Pu Wen 31 August 2019, 02:19:58 UTC tools/power turbostat: Fix caller parameter of get_tdp_amd() Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL") add a function get_tdp_amd(), the parameter is CPU family. But the rapl_probe_amd() function use wrong model parameter. Fix the wrong caller parameter of get_tdp_amd() to use family. Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Pu Wen <puwen@hygon.cn> Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca> Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:39 UTC
1e9042b Srinivas Pandruvada 27 August 2019, 17:57:14 UTC tools/power turbostat: Fix CPU%C1 display value In some case C1% will be wrong value, when platform doesn't have MSR for C1 residency. For example: Core CPU CPU%c1 - - 100.00 0 0 100.00 0 2 100.00 1 1 100.00 1 3 100.00 But adding Busy% will fix this Core CPU Busy% CPU%c1 - - 99.77 0.23 0 0 99.77 0.23 0 2 99.77 0.23 1 1 99.77 0.23 1 3 99.77 0.23 This issue can be reproduced on most of the recent systems including Broadwell, Skylake and later. This is because if we don't select Busy% or Avg_MHz or Bzy_MHz then mperf value will not be read from MSR, so it will be 0. But this is required for C1% calculation when MSR for C1 residency is not present. Same is true for C3, C6 and C7 column selection. So add another define DO_BIC_READ(), which doesn't depend on user column selection and use for mperf, C3, C6 and C7 related counters. So when there is no platform support for C1 residency counters, we still read these counters, if the CPU has support and user selected display of CPU%c1. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:39 UTC
6ee9fc6 Artem Bityutskiy 14 August 2019, 17:12:56 UTC tools/power turbostat: do not enforce 1ms Turbostat works by taking a snapshot of counters, sleeping, taking another snapshot, calculating deltas, and printing out the table. The sleep time is controlled via -i option or by user sending a signal or a character to stdin. In the latter case, turbostat always adds 1 ms sleep before it reads the counters, in order to avoid larger imprecisions in the results in prints. While the 1 ms delay may be a good idea for a "dumb" user, it is a problem for an "aware" user. I do thousands and thousands of measurements over a short period of time (like 2ms), and turbostat unconditionally adds a 1ms to my interval, so I cannot get what I really need. This patch removes the unconditional 1ms sleep. This is an expert user tool, after all, and non-experts will unlikely ever use it in the non-fixed interval mode anyway, so I think it is OK to remove the 1ms delay. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:39 UTC
c026c23 Artem Bityutskiy 14 August 2019, 17:12:55 UTC tools/power turbostat: read from pipes too Commit '47936f944e78 tools/power turbostat: fix printing on input' make a valid fix, but it completely disabled piped stdin support, which is a valuable use-case. Indeed, if stdin is a pipe, turbostat won't read anything from it, so it becomes impossible to get turbostat output at user-defined moments, instead of the regular intervals. There is no reason why this should works for terminals, but not for pipes. This patch improves the situation. Instead of ignoring pipes, we read data from them but gracefully handle the EOF case. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:39 UTC
d93ea56 Rajneesh Bhardwaj 14 June 2019, 07:39:46 UTC tools/power turbostat: Add Ice Lake NNPI support This enables turbostat utility on Ice Lake NNPI SoC. Link: https://lkml.org/lkml/2019/6/5/1034 Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:39 UTC
570992f Len Brown 31 August 2019, 18:16:07 UTC tools/power turbostat: rename has_hsw_msrs() Perhaps if this more descriptive name had been used, then we wouldn't have had the HSW ULT vs HSW CORE bug, fixed by the previous commit. Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:39 UTC
cd188af Len Brown 31 August 2019, 18:09:29 UTC tools/power turbostat: Fix Haswell Core systems turbostat: cpu0: msr offset 0x630 read failed: Input/output error because Haswell Core does not have C8-C10. Output C8-C10 only on Haswell ULT. Fixes: f5a4c76ad7de ("tools/power turbostat: consolidate duplicate model numbers") Reported-by: Prarit Bhargava <prarit@redhat.com> Suggested-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:39 UTC
b62b318 Zhang Rui 21 April 2019, 08:30:22 UTC tools/power turbostat: add Jacobsville support Jacobsville behaves like Denverton. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:39 UTC
eeb71c9 Naoya Horiguchi 03 April 2019, 07:02:14 UTC tools/power turbostat: fix buffer overrun turbostat could be terminated by general protection fault on some latest hardwares which (for example) support 9 levels of C-states and show 18 "tADDED" lines. That bloats the total output and finally causes buffer overrun. So let's extend the buffer to avoid this. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Len Brown <len.brown@intel.com> 31 August 2019, 18:48:34 UTC
back to top