Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
16fbf79 Linus Torvalds 23 March 2020, 01:31:56 UTC Linux 5.6-rc7 23 March 2020, 01:31:56 UTC
67d584e Linus Torvalds 22 March 2020, 18:35:33 UTC Merge tag 'for-5.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Two fixes. The first is a regression: when dropping some incompat bits the conditions were reversed. The other is a fix for rename whiteout potentially leaving stack memory linked to a list" * tag 'for-5.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix removal of raid[56|1c34} incompat flags after removing block group btrfs: fix log context list corruption after rename whiteout error 22 March 2020, 18:35:33 UTC
b3c03db Linus Torvalds 22 March 2020, 17:46:50 UTC Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: x86/mm: split vmalloc_sync_all() mm, slub: prevent kmalloc_node crashes and memory leaks mm/mmu_notifier: silence PROVE_RCU_LIST warnings epoll: fix possible lost wakeup on epoll_ctl() path mm: do not allow MADV_PAGEOUT for CoW pages mm, memcg: throttle allocators based on ancestral memory.high mm, memcg: fix corruption on 64-bit divisor in memory.high throttling page-flags: fix a crash at SetPageError(THP_SWAP) mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event 22 March 2020, 17:46:50 UTC
763802b Joerg Roedel 22 March 2020, 01:22:41 UTC x86/mm: split vmalloc_sync_all() Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in the vunmap() code-path. While this change was necessary to maintain correctness on x86-32-pae kernels, it also adds additional cycles for architectures that don't need it. Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported severe performance regressions in micro-benchmarks because it now also calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But the vmalloc_sync_all() implementation on x86-64 is only needed for newly created mappings. To avoid the unnecessary work on x86-64 and to gain the performance back, split up vmalloc_sync_all() into two functions: * vmalloc_sync_mappings(), and * vmalloc_sync_unmappings() Most call-sites to vmalloc_sync_all() only care about new mappings being synchronized. The only exception is the new call-site added in the above mentioned commit. Shile Zhang directed us to a report of an 80% regression in reaim throughput. Fixes: 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES] Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/ Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2020, 01:56:06 UTC
0715e6c Vlastimil Babka 22 March 2020, 01:22:37 UTC mm, slub: prevent kmalloc_node crashes and memory leaks Sachin reports [1] a crash in SLUB __slab_alloc(): BUG: Kernel NULL pointer dereference on read at 0x000073b0 Faulting instruction address: 0xc0000000003d55f4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 19 PID: 1 Comm: systemd Not tainted 5.6.0-rc2-next-20200218-autotest #1 NIP: c0000000003d55f4 LR: c0000000003d5b94 CTR: 0000000000000000 REGS: c0000008b37836d0 TRAP: 0300 Not tainted (5.6.0-rc2-next-20200218-autotest) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24004844 XER: 00000000 CFAR: c00000000000dec4 DAR: 00000000000073b0 DSISR: 40000000 IRQMASK: 1 GPR00: c0000000003d5b94 c0000008b3783960 c00000000155d400 c0000008b301f500 GPR04: 0000000000000dc0 0000000000000002 c0000000003443d8 c0000008bb398620 GPR08: 00000008ba2f0000 0000000000000001 0000000000000000 0000000000000000 GPR12: 0000000024004844 c00000001ec52a00 0000000000000000 0000000000000000 GPR16: c0000008a1b20048 c000000001595898 c000000001750c18 0000000000000002 GPR20: c000000001750c28 c000000001624470 0000000fffffffe0 5deadbeef0000122 GPR24: 0000000000000001 0000000000000dc0 0000000000000002 c0000000003443d8 GPR28: c0000008b301f500 c0000008bb398620 0000000000000000 c00c000002287180 NIP ___slab_alloc+0x1f4/0x760 LR __slab_alloc+0x34/0x60 Call Trace: ___slab_alloc+0x334/0x760 (unreliable) __slab_alloc+0x34/0x60 __kmalloc_node+0x110/0x490 kvmalloc_node+0x58/0x110 mem_cgroup_css_online+0x108/0x270 online_css+0x48/0xd0 cgroup_apply_control_enable+0x2ec/0x4d0 cgroup_mkdir+0x228/0x5f0 kernfs_iop_mkdir+0x90/0xf0 vfs_mkdir+0x110/0x230 do_mkdirat+0xb0/0x1a0 system_call+0x5c/0x68 This is a PowerPC platform with following NUMA topology: available: 2 nodes (0-1) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 1 size: 35247 MB node 1 free: 30907 MB node distances: node 0 1 0: 10 40 1: 40 10 possible numa nodes: 0-31 This only happens with a mmotm patch "mm/memcontrol.c: allocate shrinker_map on appropriate NUMA node" [2] which effectively calls kmalloc_node for each possible node. SLUB however only allocates kmem_cache_node on online N_NORMAL_MEMORY nodes, and relies on node_to_mem_node to return such valid node for other nodes since commit a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating on memoryless node"). This is however not true in this configuration where the _node_numa_mem_ array is not initialized for nodes 0 and 2-31, thus it contains zeroes and get_partial() ends up accessing non-allocated kmem_cache_node. A related issue was reported by Bharata (originally by Ramachandran) [3] where a similar PowerPC configuration, but with mainline kernel without patch [2] ends up allocating large amounts of pages by kmalloc-1k kmalloc-512. This seems to have the same underlying issue with node_to_mem_node() not behaving as expected, and might probably also lead to an infinite loop with CONFIG_SLUB_CPU_PARTIAL [4]. This patch should fix both issues by not relying on node_to_mem_node() anymore and instead simply falling back to NUMA_NO_NODE, when kmalloc_node(node) is attempted for a node that's not online, or has no usable memory. The "usable memory" condition is also changed from node_present_pages() to N_NORMAL_MEMORY node state, as that is exactly the condition that SLUB uses to allocate kmem_cache_node structures. The check in get_partial() is removed completely, as the checks in ___slab_alloc() are now sufficient to prevent get_partial() being reached with an invalid node. [1] https://lore.kernel.org/linux-next/3381CD91-AB3D-4773-BA04-E7A072A63968@linux.vnet.ibm.com/ [2] https://lore.kernel.org/linux-mm/fff0e636-4c36-ed10-281c-8cdb0687c839@virtuozzo.com/ [3] https://lore.kernel.org/linux-mm/20200317092624.GB22538@in.ibm.com/ [4] https://lore.kernel.org/linux-mm/088b5996-faae-8a56-ef9c-5b567125ae54@suse.cz/ Fixes: a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating on memoryless node") Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Reported-by: PUVICHAKRAVARTHY RAMACHANDRAN <puvichakravarthy@in.ibm.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Tested-by: Bharata B Rao <bharata@linux.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christopher Lameter <cl@linux.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200320115533.9604-1-vbabka@suse.cz Debugged-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2020, 01:56:06 UTC
63886ba Qian Cai 22 March 2020, 01:22:34 UTC mm/mmu_notifier: silence PROVE_RCU_LIST warnings It is safe to traverse mm->notifier_subscriptions->list either under SRCU read lock or mm->notifier_subscriptions->lock using hlist_for_each_entry_rcu(). Silence the PROVE_RCU_LIST false positives, for example, WARNING: suspicious RCU usage ----------------------------- mm/mmu_notifier.c:484 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by libvirtd/802: #0: ffff9321e3f58148 (&mm->mmap_sem#2){++++}, at: do_mprotect_pkey+0xe1/0x3e0 #1: ffffffff91ae6160 (mmu_notifier_invalidate_range_start){+.+.}, at: change_p4d_range+0x5fa/0x800 #2: ffffffff91ae6e08 (srcu){....}, at: __mmu_notifier_invalidate_range_start+0x178/0x460 stack backtrace: CPU: 7 PID: 802 Comm: libvirtd Tainted: G I 5.6.0-rc6-next-20200317+ #2 Hardware name: HP ProLiant BL460c Gen8, BIOS I31 11/02/2014 Call Trace: dump_stack+0xa4/0xfe lockdep_rcu_suspicious+0xeb/0xf5 __mmu_notifier_invalidate_range_start+0x3ff/0x460 change_p4d_range+0x746/0x800 change_protection+0x1df/0x300 mprotect_fixup+0x245/0x3e0 do_mprotect_pkey+0x23b/0x3e0 __x64_sys_mprotect+0x51/0x70 do_syscall_64+0x91/0xae8 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Link: http://lkml.kernel.org/r/20200317175640.2047-1-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2020, 01:56:06 UTC
1b53734 Roman Penyaev 22 March 2020, 01:22:30 UTC epoll: fix possible lost wakeup on epoll_ctl() path This fixes possible lost wakeup introduced by commit a218cc491420. Originally modifications to ep->wq were serialized by ep->wq.lock, but in commit a218cc491420 ("epoll: use rwlock in order to reduce ep_poll_callback() contention") a new rw lock was introduced in order to relax fd event path, i.e. callers of ep_poll_callback() function. After the change ep_modify and ep_insert (both are called on epoll_ctl() path) were switched to ep->lock, but ep_poll (epoll_wait) was using ep->wq.lock on wqueue list modification. The bug doesn't lead to any wqueue list corruptions, because wake up path and list modifications were serialized by ep->wq.lock internally, but actual waitqueue_active() check prior wake_up() call can be reordered with modifications of ep ready list, thus wake up can be lost. And yes, can be healed by explicit smp_mb(): list_add_tail(&epi->rdlink, &ep->rdllist); smp_mb(); if (waitqueue_active(&ep->wq)) wake_up(&ep->wp); But let's make it simple, thus current patch replaces ep->wq.lock with the ep->lock for wqueue modifications, thus wake up path always observes activeness of the wqueue correcty. Fixes: a218cc491420 ("epoll: use rwlock in order to reduce ep_poll_callback() contention") Reported-by: Max Neunhoeffer <max@arangodb.com> Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Max Neunhoeffer <max@arangodb.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Christopher Kohlhoff <chris.kohlhoff@clearpool.io> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Jes Sorensen <jes.sorensen@gmail.com> Cc: <stable@vger.kernel.org> [5.1+] Link: http://lkml.kernel.org/r/20200214170211.561524-1-rpenyaev@suse.de References: https://bugzilla.kernel.org/show_bug.cgi?id=205933 Bisected-by: Max Neunhoeffer <max@arangodb.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2020, 01:56:06 UTC
12e967f Michal Hocko 22 March 2020, 01:22:26 UTC mm: do not allow MADV_PAGEOUT for CoW pages Jann has brought up a very interesting point [1]. While shared pages are excluded from MADV_PAGEOUT normally, CoW pages can be easily reclaimed that way. This can lead to all sorts of hard to debug problems. E.g. performance problems outlined by Daniel [2]. There are runtime environments where there is a substantial memory shared among security domains via CoW memory and a easy to reclaim way of that memory, which MADV_{COLD,PAGEOUT} offers, can lead to either performance degradation in for the parent process which might be more privileged or even open side channel attacks. The feasibility of the latter is not really clear to me TBH but there is no real reason for exposure at this stage. It seems there is no real use case to depend on reclaiming CoW memory via madvise at this stage so it is much easier to simply disallow it and this is what this patch does. Put it simply MADV_{PAGEOUT,COLD} can operate only on the exclusively owned memory which is a straightforward semantic. [1] http://lkml.kernel.org/r/CAG48ez0G3JkMq61gUmyQAaCq=_TwHbi1XKzWRooxZkv08PQKuw@mail.gmail.com [2] http://lkml.kernel.org/r/CAKOZueua_v8jHCpmEtTB6f3i9e2YnmX4mqdYVWhV4E=Z-n+zRQ@mail.gmail.com Fixes: 9c276cc65a58 ("mm: introduce MADV_COLD") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200312082248.GS23944@dhcp22.suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2020, 01:56:06 UTC
e26733e Chris Down 22 March 2020, 01:22:23 UTC mm, memcg: throttle allocators based on ancestral memory.high Prior to this commit, we only directly check the affected cgroup's memory.high against its usage. However, it's possible that we are being reclaimed as a result of hitting an ancestor memory.high and should be penalised based on that, instead. This patch changes memory.high overage throttling to use the largest overage in its ancestors when considering how many penalty jiffies to charge. This makes sure that we penalise poorly behaving cgroups in the same way regardless of at what level of the hierarchy memory.high was breached. Fixes: 0e4b01df8659 ("mm, memcg: throttle allocators when failing reclaim over memory.high") Reported-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> [5.4.x+] Link: http://lkml.kernel.org/r/8cd132f84bd7e16cdb8fde3378cdbf05ba00d387.1584036142.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2020, 01:56:06 UTC
d397a45 Chris Down 22 March 2020, 01:22:20 UTC mm, memcg: fix corruption on 64-bit divisor in memory.high throttling Commit 0e4b01df8659 had a bunch of fixups to use the right division method. However, it seems that after all that it still wasn't right -- div_u64 takes a 32-bit divisor. The headroom is still large (2^32 pages), so on mundane systems you won't hit this, but this should definitely be fixed. Fixes: 0e4b01df8659 ("mm, memcg: throttle allocators when failing reclaim over memory.high") Reported-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: <stable@vger.kernel.org> [5.4.x+] Link: http://lkml.kernel.org/r/80780887060514967d414b3cd91f9a316a16ab98.1584036142.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2020, 01:56:06 UTC
d72520a Qian Cai 22 March 2020, 01:22:17 UTC page-flags: fix a crash at SetPageError(THP_SWAP) Commit bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped out") supported writing THP to a swap device but forgot to upgrade an older commit df8c94d13c7e ("page-flags: define behavior of FS/IO-related flags on compound pages") which could trigger a crash during THP swapping out with DEBUG_VM_PGFLAGS=y, kernel BUG at include/linux/page-flags.h:317! page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page)) page:fffff3b2ec3a8000 refcount:512 mapcount:0 mapping:000000009eb0338c index:0x7f6e58200 head:fffff3b2ec3a8000 order:9 compound_mapcount:0 compound_pincount:0 anon flags: 0x45fffe0000d8454(uptodate|lru|workingset|owner_priv_1|writeback|head|reclaim|swapbacked) end_swap_bio_write() SetPageError(page) VM_BUG_ON_PAGE(1 && PageCompound(page)) <IRQ> bio_endio+0x297/0x560 dec_pending+0x218/0x430 [dm_mod] clone_endio+0xe4/0x2c0 [dm_mod] bio_endio+0x297/0x560 blk_update_request+0x201/0x920 scsi_end_request+0x6b/0x4b0 scsi_io_completion+0x509/0x7e0 scsi_finish_command+0x1ed/0x2a0 scsi_softirq_done+0x1c9/0x1d0 __blk_mqnterrupt+0xf/0x20 </IRQ> Fix by checking PF_NO_TAIL in those places instead. Fixes: bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped out") Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200310235846.1319-1-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2020, 01:56:06 UTC
d41e2f3 Baoquan He 22 March 2020, 01:22:13 UTC mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case In section_deactivate(), pfn_to_page() doesn't work any more after ms->section_mem_map is resetting to NULL in SPARSEMEM|!VMEMMAP case. It causes a hot remove failure: kernel BUG at mm/page_alloc.c:4806! invalid opcode: 0000 [#1] SMP PTI CPU: 3 PID: 8 Comm: kworker/u16:0 Tainted: G W 5.5.0-next-20200205+ #340 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:free_pages+0x85/0xa0 Call Trace: __remove_pages+0x99/0xc0 arch_remove_memory+0x23/0x4d try_remove_memory+0xc8/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x72/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x2eb/0x3d0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x1a7/0x370 worker_thread+0x30/0x380 kthread+0x112/0x130 ret_from_fork+0x35/0x40 Let's move the ->section_mem_map resetting after depopulate_section_memmap() to fix it. [akpm@linux-foundation.org: remove unneeded initialization, per David] Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug") Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200307084229.28251-2-bhe@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2020, 01:56:06 UTC
7d36665 Chunguang Xu 22 March 2020, 01:22:10 UTC memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event An eventfd monitors multiple memory thresholds of the cgroup, closes them, the kernel deletes all events related to this eventfd. Before all events are deleted, another eventfd monitors the memory threshold of this cgroup, leading to a crash: BUG: kernel NULL pointer dereference, address: 0000000000000004 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 800000033058e067 P4D 800000033058e067 PUD 3355ce067 PMD 0 Oops: 0002 [#1] SMP PTI CPU: 2 PID: 14012 Comm: kworker/2:6 Kdump: loaded Not tainted 5.6.0-rc4 #3 Hardware name: LENOVO 20AWS01K00/20AWS01K00, BIOS GLET70WW (2.24 ) 05/21/2014 Workqueue: events memcg_event_remove RIP: 0010:__mem_cgroup_usage_unregister_event+0xb3/0x190 RSP: 0018:ffffb47e01c4fe18 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff8bb223a8a000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffff8bb22fb83540 RDI: 0000000000000001 RBP: ffffb47e01c4fe48 R08: 0000000000000000 R09: 0000000000000010 R10: 000000000000000c R11: 071c71c71c71c71c R12: ffff8bb226aba880 R13: ffff8bb223a8a480 R14: 0000000000000000 R15: 0000000000000000 FS:  0000000000000000(0000) GS:ffff8bb242680000(0000) knlGS:0000000000000000 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 000000032c29c003 CR4: 00000000001606e0 Call Trace: memcg_event_remove+0x32/0x90 process_one_work+0x172/0x380 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 CR2: 0000000000000004 We can reproduce this problem in the following ways: 1. We create a new cgroup subdirectory and a new eventfd, and then we monitor multiple memory thresholds of the cgroup through this eventfd. 2. closing this eventfd, and __mem_cgroup_usage_unregister_event () will be called multiple times to delete all events related to this eventfd. The first time __mem_cgroup_usage_unregister_event() is called, the kernel will clear all items related to this eventfd in thresholds-> primary. Since there is currently only one eventfd, thresholds-> primary becomes empty, so the kernel will set thresholds-> primary and hresholds-> spare to NULL. If at this time, the user creates a new eventfd and monitor the memory threshold of this cgroup, kernel will re-initialize thresholds-> primary. Then when __mem_cgroup_usage_unregister_event () is called for the second time, because thresholds-> primary is not empty, the system will access thresholds-> spare, but thresholds-> spare is NULL, which will trigger a crash. In general, the longer it takes to delete all events related to this eventfd, the easier it is to trigger this problem. The solution is to check whether the thresholds associated with the eventfd has been cleared when deleting the event. If so, we do nothing. [akpm@linux-foundation.org: fix comment, per Kirill] Fixes: 907860ed381a ("cgroups: make cftype.unregister_event() void-returning") Signed-off-by: Chunguang Xu <brookxu@tencent.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/077a6f67-aefa-4591-efec-f2f3af2b0b02@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 March 2020, 01:56:06 UTC
b74b991 Linus Torvalds 21 March 2020, 19:08:26 UTC Merge tag 'block-5.6-20200320' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Just two NVMe fabrics fixes that should go into 5.6" * tag 'block-5.6-20200320' of git://git.kernel.dk/linux-block: nvmet-tcp: set MSG_MORE only if we actually have more to send nvme-rdma: Avoid double freeing of async event data 21 March 2020, 19:08:26 UTC
1ab7ea1 Linus Torvalds 21 March 2020, 18:54:47 UTC Merge tag 'io_uring-5.6-20200320' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: "Two different fixes in here: - Fix for a potential NULL pointer deref for links with async or drain marked (Pavel) - Fix for not properly checking RLIMIT_NOFILE for async punted operations. This affects openat/openat2, which were added this cycle, and accept4. I did a full audit of other cases where we might check current->signal->rlim[] and found only RLIMIT_FSIZE for buffered writes and fallocate. That one is fixed and queued for 5.7 and marked stable" * tag 'io_uring-5.6-20200320' of git://git.kernel.dk/linux-block: io_uring: make sure accept honor rlimit nofile io_uring: make sure openat/openat2 honor rlimit nofile io_uring: NULL-deref for IOSQE_{ASYNC,DRAIN} 21 March 2020, 18:54:47 UTC
6c1bae7 Linus Torvalds 21 March 2020, 18:50:36 UTC Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: "Update to turbostat v20.03.20. These patches unlock the full turbostat features for some new machines, plus a couple other minor tweaks" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version tools/power turbostat: Print cpuidle information tools/power turbostat: Fix 32-bit capabilities warning tools/power turbostat: Fix missing SYS_LPI counter on some Chromebooks tools/power turbostat: Support Elkhart Lake tools/power turbostat: Support Jasper Lake tools/power turbostat: Support Ice Lake server tools/power turbostat: Support Tiger Lake tools/power turbostat: Fix gcc build warnings tools/power turbostat: Support Cometlake 21 March 2020, 18:50:36 UTC
c63c50f Linus Torvalds 21 March 2020, 15:51:45 UTC Merge tag 'powerpc-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two fixes for bugs introduced this cycle: - fix a crash when shutting down a KVM PR guest (our original style of KVM which doesn't use hypervisor mode) - fix for the recently added 32-bit KASAN_VMALLOC support Thanks to: Christophe Leroy, Greg Kurz, Sean Christopherson" * tag 'powerpc-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Fix kernel crash with PR KVM powerpc/kasan: Fix shadow memory protection with CONFIG_KASAN_VMALLOC 21 March 2020, 15:51:45 UTC
b95fffb Len Brown 18 November 2019, 02:18:31 UTC tools/power turbostat: update version A stitch in time saves nine. Signed-off-by: Len Brown <len.brown@intel.com> 21 March 2020, 04:48:02 UTC
abdcbdb Len Brown 21 March 2020, 04:47:47 UTC tools/power turbostat: Print cpuidle information Print cpuidle driver and governor. Originally-by: Antti Laakso <antti.laakso@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 21 March 2020, 04:47:47 UTC
83166ac Jens Axboe 21 March 2020, 01:14:16 UTC Merge branch 'nvme-5.6-rc6' of git://git.infradead.org/nvme into block-5.6 Pull NVMe fixes from Keith: "Two late nvme fabrics fixes for 5.6: a double free with the rdma transport, and a regression fix for tcp; please pull." * 'nvme-5.6-rc6' of git://git.infradead.org/nvme: nvmet-tcp: set MSG_MORE only if we actually have more to send nvme-rdma: Avoid double freeing of async event data 21 March 2020, 01:14:16 UTC
d8e6fd5 Filipe Manana 20 March 2020, 18:43:48 UTC btrfs: fix removal of raid[56|1c34} incompat flags after removing block group We are incorrectly dropping the raid56 and raid1c34 incompat flags when there are still raid56 and raid1c34 block groups, not when we do not any of those anymore. The logic just got unintentionally broken after adding the support for the raid1c34 modes. Fix this by clear the flags only if we do not have block groups with the respective profiles. Fixes: 9c907446dce3 ("btrfs: drop incompat bit for raid1c34 after last block group is gone") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 20 March 2020, 20:31:32 UTC
98fd5c7 Sagi Grimberg 12 March 2020, 23:06:38 UTC nvmet-tcp: set MSG_MORE only if we actually have more to send When we send PDU data, we want to optimize the tcp stack operation if we have more data to send. So when we set MSG_MORE when: - We have more fragments coming in the batch, or - We have a more data to send in this PDU - We don't have a data digest trailer - We optimize with the SUCCESS flag and omit the NVMe completion (used if sq_head pointer update is disabled) This addresses a regression in QD=1 with SUCCESS flag optimization as we unconditionally set MSG_MORE when we didn't actually have more data to send. Fixes: 70583295388a ("nvmet-tcp: implement C2HData SUCCESS optimization") Reported-by: Mark Wunderlich <mark.wunderlich@intel.com> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> 20 March 2020, 19:37:53 UTC
5ad0ec0 Linus Torvalds 20 March 2020, 16:28:25 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Fix panic() when it occurs during secondary CPU startup - Fix "kpti=off" when KASLR is enabled - Fix howler in compat syscall table for vDSO clock_getres() fallback * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: compat: Fix syscall number of compat_clock_getres arm64: kpti: Fix "kpti=off" when KASLR is enabled arm64: smp: fix crash_smp_send_stop() behaviour arm64: smp: fix smp_send_stop() behaviour 20 March 2020, 16:28:25 UTC
f014d2b Linus Torvalds 20 March 2020, 16:24:22 UTC Merge tag 'char-misc-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small different driver fixes for 5.6-rc7: - binderfs fix, yet again - slimbus new device id added - hwtracing bugfixes for reported issues and a new device id All of these have been in linux-next with no reported issues" * tag 'char-misc-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: intel_th: pci: Add Elkhart Lake CPU support intel_th: Fix user-visible error codes intel_th: msu: Fix the unexpected state warning stm class: sys-t: Fix the use of time_after() slimbus: ngd: add v2.1.0 compatible binderfs: use refcount for binder control devices too 20 March 2020, 16:24:22 UTC
3bd1482 Linus Torvalds 20 March 2020, 16:20:38 UTC Merge tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO fixes from Greg KH: "Here are a number of small staging and IIO driver fixes for 5.6-rc7 Nothing major here, just resolutions for some reported problems: - iio bugfixes for a number of different drivers - greybus loopback_test fixes - wfx driver fixes All of these have been in linux-next with no reported issues" * tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: Add device id for MERCUSYS MW150US v2 staging: greybus: loopback_test: fix potential path truncations staging: greybus: loopback_test: fix potential path truncation staging: greybus: loopback_test: fix poll-mask build breakage staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie() staging: wfx: fix RCU usage in wfx_join_finalize() staging: wfx: make warning about pending frame less scary staging: wfx: fix lines ending with a comma instead of a semicolon staging: wfx: fix warning about freeing in-use mutex during device unregister staging/speakup: fix get_word non-space look-ahead iio: ping: set pa_laser_ping_cfg in of_ping_match iio: chemical: sps30: fix missing triggered buffer dependency iio: st_sensors: remap SMO8840 to LIS2DH12 iio: light: vcnl4000: update sampling periods for vcnl4040 iio: light: vcnl4000: update sampling periods for vcnl4200 iio: accel: adxl372: Set iio_chan BE iio: magnetometer: ak8974: Fix negative raw values in sysfs iio: trigger: stm32-timer: disable master mode when stopping iio: adc: stm32-dfsdm: fix sleep in atomic context iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode 20 March 2020, 16:20:38 UTC
b07c2e7 Linus Torvalds 20 March 2020, 16:16:35 UTC Merge tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.6-rc7. And there's a thunderbolt driver fix thrown in for good measure as well. These fixes are: - new device ids for usb-serial drivers - thunderbolt error code fix - xhci driver fixes - typec fixes - cdc-acm driver fixes - chipidea driver fix - more USB quirks added for devices that need them. All of these have been in linux-next with no reported issues" * tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: cdc-acm: fix rounding error in TIOCSSERIAL USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters usb: chipidea: udc: fix sleeping function called from invalid context USB: serial: pl2303: add device-id for HP LD381 USB: serial: option: add ME910G1 ECM composition 0x110b usb: host: xhci-plat: add a shutdown usb: typec: ucsi: displayport: Fix a potential race during registration usb: typec: ucsi: displayport: Fix NULL pointer dereference USB: Disable LPM on WD19's Realtek Hub usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c xhci: Do not open code __print_symbolic() in xhci trace events thunderbolt: Fix error code in tb_port_is_width_supported() 20 March 2020, 16:16:35 UTC
fa91418 Linus Torvalds 20 March 2020, 16:13:35 UTC Merge tag 'tty-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fixes from Greg KH: "Here are three small tty_io bugfixes for reported issues that Eric has resolved for 5.6-rc7 All of these have been in linux-next with no reported issues" * tag 'tty-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix compat TIOCGSERIAL checking wrong function ptr tty: fix compat TIOCGSERIAL leaking uninitialized memory tty: drop outdated comments about release_tty() locking 20 March 2020, 16:13:35 UTC
12bf19c Linus Torvalds 20 March 2020, 16:10:29 UTC Merge tag 'sound-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few fixes covering the issues reported by syzkaller, a couple of fixes for the MIDI decoding bug, and a few usual HD-audio quirks. Some of them are about ALSA core stuff, but they are small fixes just for corner cases, and nothing thrilling" * tag 'sound-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662 ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662 ALSA: seq: oss: Fix running status after receiving sysex ALSA: seq: virmidi: Fix running status after receiving sysex ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks ALSA: hda/realtek: Fix pop noise on ALC225 ALSA: line6: Fix endless MIDI read loop ALSA: pcm: oss: Avoid plugin buffer overflow 20 March 2020, 16:10:29 UTC
69d3e5a Linus Torvalds 20 March 2020, 16:03:54 UTC Merge tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Hope you are well hiding out above the garage. A few amdgpu changes but nothing too major. I've had a wisdom tooth out this week so haven't been to on top of things, but all seems good. core: - fix lease warning i915: - Track active elements during dequeue - Fix failure to handle all MCR ranges - Revert unnecessary workaround amdgpu: - Pageflip fix - VCN clockgating fixes - GPR debugfs fix for umr - GPU reset fix - eDP fix for MBP - DCN2.x fix dw-hdmi: - fix AVI frame colorimetry komeda: - fix compiler warning bochs: - downgrade a binding failure to a warning" * tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Fix pageflip event race condition for DCN. drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check drm/amdgpu: fix typo for vcn2/jpeg2 idle check drm/amdgpu: fix typo for vcn1 idle check drm/lease: fix WARNING in idr_destroy drm/i915: Handle all MCR ranges Revert "drm/i915/tgl: Add extra hdc flush workaround" drm/i915/execlists: Track active elements during dequeue drm/bochs: downgrade pci_request_region failure from error to warning drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017 drm/amdgpu: add fbdev suspend/resume on gpu reset drm/amd/amdgpu: Fix GPR read from debugfs (v2) drm/amd/display: fix typos for dcn20_funcs and dcn21_funcs struct drm/komeda: mark PM functions as __maybe_unused drm/bridge: dw-hdmi: fix AVI frame colorimetry 20 March 2020, 16:03:54 UTC
09952e3 Jens Axboe 20 March 2020, 02:16:56 UTC io_uring: make sure accept honor rlimit nofile Just like commit 4022e7af86be, this fixes the fact that IORING_OP_ACCEPT ends up using get_unused_fd_flags(), which checks current->signal->rlim[] for limits. Add an extra argument to __sys_accept4_file() that allows us to pass in the proper nofile limit, and grab it at request prep time. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@kernel.dk> 20 March 2020, 14:48:36 UTC
4022e7a Jens Axboe 20 March 2020, 01:23:18 UTC io_uring: make sure openat/openat2 honor rlimit nofile Dmitry reports that a test case shows that io_uring isn't honoring a modified rlimit nofile setting. get_unused_fd_flags() checks the task signal->rlimi[] for the limits. As this isn't easily inheritable, provide a __get_unused_fd_flags() that takes the value instead. Then we can grab it when the request is prepared (from the original task), and pass that in when we do the async part part of the open. Reported-by: Dmitry Kadashev <dkadashev@gmail.com> Tested-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@kernel.dk> 20 March 2020, 14:47:27 UTC
fcaa681 Len Brown 20 March 2020, 03:24:17 UTC tools/power turbostat: Fix 32-bit capabilities warning warning: `turbostat' uses 32-bit capabilities (legacy support in use) Signed-off-by: Len Brown <len.brown@intel.com> 20 March 2020, 04:32:28 UTC
1f81c5e Len Brown 19 March 2020, 22:26:05 UTC tools/power turbostat: Fix missing SYS_LPI counter on some Chromebooks Some Chromebook BIOS' do not export an ACPI LPIT, which is how Linux finds the residency counter for CPU and SYSTEM low power states, that is exports in /sys/devices/system/cpu/cpuidle/*residency_us When these sysfs attributes are missing, check the debugfs attrubte from the pmc_core driver, which accesses the same counter value. Signed-off-by: Len Brown <len.brown@intel.com> 20 March 2020, 04:32:28 UTC
f670840 Chen Yu 18 March 2020, 10:55:48 UTC tools/power turbostat: Support Elkhart Lake From a turbostat point of view the Tremont-based Elkhart Lake is very similar to Goldmont, reuse the code of Goldmont. Elkhart Lake does not support 'group turbo limit counter' nor C3, adjust the code accordingly. Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 20 March 2020, 04:32:27 UTC
d7814c3 Chen Yu 14 January 2020, 04:09:45 UTC tools/power turbostat: Support Jasper Lake Jasper Lake, like Elkhart Lake, uses a Tremont CPU. So reuse the code. Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 20 March 2020, 04:32:27 UTC
23274fa Chen Yu 14 January 2020, 04:06:49 UTC tools/power turbostat: Support Ice Lake server From a turbostat point of view, Ice Lake server looks like Sky Lake server. Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 20 March 2020, 04:32:27 UTC
4bf7132 Chen Yu 14 January 2020, 04:04:55 UTC tools/power turbostat: Support Tiger Lake From a turbostat point of view, Tiger Lake looks like Ice Lake. Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 20 March 2020, 04:32:27 UTC
d8d005b Len Brown 19 March 2020, 22:33:12 UTC tools/power turbostat: Fix gcc build warnings Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size [-Wstringop-truncation] reduce param to strncpy, to guarantee that a null byte is always copied into destination buffer. Signed-off-by: Len Brown <len.brown@intel.com> 20 March 2020, 04:32:27 UTC
081c543 Chen Yu 31 October 2019, 13:14:22 UTC tools/power turbostat: Support Cometlake From a turbostat point of view, Cometlake is like Kabylake. Suggested-by: Rui Zhang <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> 20 March 2020, 04:32:27 UTC
5366b96 Dave Airlie 20 March 2020, 02:51:34 UTC Merge tag 'drm-intel-fixes-2020-03-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc7: - Track active elements during dequeue - Fix failure to handle all MCR ranges - Revert unnecessary workaround Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/877dzgepvu.fsf@intel.com 20 March 2020, 02:52:35 UTC
362b86a Dave Airlie 20 March 2020, 02:48:10 UTC Merge tag 'amd-drm-fixes-5.6-2020-03-19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-19: amdgpu: - Pageflip fix - VCN clockgating fixes - GPR debugfs fix for umr - GPU reset fix - eDP fix for MBP - DCN2.x fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200319204054.1036478-1-alexander.deucher@amd.com 20 March 2020, 02:48:17 UTC
1d0c32e Greg Kurz 18 March 2020, 17:43:30 UTC KVM: PPC: Fix kernel crash with PR KVM With PR KVM, shutting down a VM causes the host kernel to crash: [ 314.219284] BUG: Unable to handle kernel data access on read at 0xc00800000176c638 [ 314.219299] Faulting instruction address: 0xc008000000d4ddb0 cpu 0x0: Vector: 300 (Data Access) at [c00000036da077a0] pc: c008000000d4ddb0: kvmppc_mmu_pte_flush_all+0x68/0xd0 [kvm_pr] lr: c008000000d4dd94: kvmppc_mmu_pte_flush_all+0x4c/0xd0 [kvm_pr] sp: c00000036da07a30 msr: 900000010280b033 dar: c00800000176c638 dsisr: 40000000 current = 0xc00000036d4c0000 paca = 0xc000000001a00000 irqmask: 0x03 irq_happened: 0x01 pid = 1992, comm = qemu-system-ppc Linux version 5.6.0-master-gku+ (greg@palmb) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #17 SMP Wed Mar 18 13:49:29 CET 2020 enter ? for help [c00000036da07ab0] c008000000d4fbe0 kvmppc_mmu_destroy_pr+0x28/0x60 [kvm_pr] [c00000036da07ae0] c0080000009eab8c kvmppc_mmu_destroy+0x34/0x50 [kvm] [c00000036da07b00] c0080000009e50c0 kvm_arch_vcpu_destroy+0x108/0x140 [kvm] [c00000036da07b30] c0080000009d1b50 kvm_vcpu_destroy+0x28/0x80 [kvm] [c00000036da07b60] c0080000009e4434 kvm_arch_destroy_vm+0xbc/0x190 [kvm] [c00000036da07ba0] c0080000009d9c2c kvm_put_kvm+0x1d4/0x3f0 [kvm] [c00000036da07c00] c0080000009da760 kvm_vm_release+0x38/0x60 [kvm] [c00000036da07c30] c000000000420be0 __fput+0xe0/0x310 [c00000036da07c90] c0000000001747a0 task_work_run+0x150/0x1c0 [c00000036da07cf0] c00000000014896c do_exit+0x44c/0xd00 [c00000036da07dc0] c0000000001492f4 do_group_exit+0x64/0xd0 [c00000036da07e00] c000000000149384 sys_exit_group+0x24/0x30 [c00000036da07e20] c00000000000b9d0 system_call+0x5c/0x68 This is caused by a use-after-free in kvmppc_mmu_pte_flush_all() which dereferences vcpu->arch.book3s which was previously freed by kvmppc_core_vcpu_free_pr(). This happens because kvmppc_mmu_destroy() is called after kvmppc_core_vcpu_free() since commit ff030fdf5573 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code"). The kvmppc_mmu_destroy() helper calls one of the following depending on the KVM backend: - kvmppc_mmu_destroy_hv() which does nothing (Book3s HV) - kvmppc_mmu_destroy_pr() which undoes the effects of kvmppc_mmu_init() (Book3s PR 32-bit) - kvmppc_mmu_destroy_pr() which undoes the effects of kvmppc_mmu_init() (Book3s PR 64-bit) - kvmppc_mmu_destroy_e500() which does nothing (BookE e500/e500mc) It turns out that this is only relevant to PR KVM actually. And both 32 and 64 backends need vcpu->arch.book3s to be valid when calling kvmppc_mmu_destroy_pr(). So instead of calling kvmppc_mmu_destroy() from kvm_arch_vcpu_destroy(), call kvmppc_mmu_destroy_pr() at the beginning of kvmppc_core_vcpu_free_pr(). This is consistent with kvmppc_mmu_init() being the last call in kvmppc_core_vcpu_create_pr(). For the same reason, if kvmppc_core_vcpu_create_pr() returns an error then this means that kvmppc_mmu_init() was either not called or failed, in which case kvmppc_mmu_destroy() should not be called. Drop the line in the error path of kvm_arch_vcpu_create(). Fixes: ff030fdf5573 ("KVM: PPC: Move kvm_vcpu_init() invocation to common code") Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/158455341029.178873.15248663726399374882.stgit@bahia.lan 20 March 2020, 02:39:10 UTC
eb916a5 Mario Kleiner 02 March 2020, 06:17:32 UTC drm/amd/display: Fix pageflip event race condition for DCN. Commit '16f17eda8bad ("drm/amd/display: Send vblank and user events at vsartup for DCN")' introduces a new way of pageflip completion handling for DCN, and some trouble. The current implementation introduces a race condition, which can cause pageflip completion events to be sent out one vblank too early, thereby confusing userspace and causing flicker: prepare_flip_isr(): 1. Pageflip programming takes the ddev->event_lock. 2. Sets acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED 3. Releases ddev->event_lock. --> Deadline for surface address regs double-buffering passes on target pipe. 4. dc_commit_updates_for_stream() MMIO programs the new pageflip into hw, but too late for current vblank. => pflip_status == AMDGPU_FLIP_SUBMITTED, but flip won't complete in current vblank due to missing the double-buffering deadline by a tiny bit. 5. VSTARTUP trigger point in vblank is reached, VSTARTUP irq fires, dm_dcn_crtc_high_irq() gets called. 6. Detects pflip_status == AMDGPU_FLIP_SUBMITTED and assumes the pageflip has been completed/will complete in this vblank and sends out pageflip completion event to userspace and resets pflip_status = AMDGPU_FLIP_NONE. => Flip completion event sent out one vblank too early. This behaviour has been observed during my testing with measurement hardware a couple of time. The commit message says that the extra flip event code was added to dm_dcn_crtc_high_irq() to prevent missing to send out pageflip events in case the pflip irq doesn't fire, because the "DCH HUBP" component is clock gated and doesn't fire pflip irqs in that state. Also that this clock gating may happen if no planes are active. This suggests that the problem addressed by that commit can't happen if planes are active. The proposed solution is therefore to only execute the extra pflip completion code iff the count of active planes is zero and otherwise leave pflip completion handling to the pflip irq handler, for a more race-free experience. Note that i don't know if this fixes the problem the original commit tried to address, as i don't know what the test scenario was. It does fix the observed too early pageflip events though and points out the problem introduced. Fixes: 16f17eda8bad ("drm/amd/display: Send vblank and user events at vsartup for DCN") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 19 March 2020, 20:18:45 UTC
6c90b86 Linus Torvalds 19 March 2020, 19:45:14 UTC Merge tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - rtsx_pci: Fix support for some various speed modes - sdhci-of-at91: Fix support for GPIO card detect on SAMA5D2 - sdhci-cadence: Fix support for DDR52 speed mode for eMMC on UniPhier - sdhci-acpi: Fix broken WP support on Acer Aspire Switch 10 - sdhci-acpi: Workaround FW bug for suspend on Lenovo Miix 320 * tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: rtsx_pci: Fix support for speed-modes that relies on tuning mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2 mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012) mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320 19 March 2020, 19:45:14 UTC
3568b88 Vincenzo Frascino 19 March 2020, 14:11:38 UTC arm64: compat: Fix syscall number of compat_clock_getres The syscall number of compat_clock_getres was erroneously set to 247 (__NR_io_cancel!) instead of 264. This causes the vDSO fallback of clock_getres() to land on the wrong syscall for compat tasks. Fix the numbering. Cc: <stable@vger.kernel.org> Fixes: 53c489e1dfeb6 ("arm64: compat: Add missing syscall numbers") Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Will Deacon <will@kernel.org> 19 March 2020, 19:23:46 UTC
cd60773 Linus Torvalds 19 March 2020, 17:19:11 UTC Merge tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Three small smb3 fixes, two for stable" * tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: CIFS: fiemap: do not return EINVAL if get nothing CIFS: Increment num_remote_opens stats counter even in case of smb2_query_dir_first cifs: potential unintitliazed error code in cifs_getattr() 19 March 2020, 17:19:11 UTC
207f75c Linus Torvalds 19 March 2020, 16:57:48 UTC Merge tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix __uint128_t capability test in Kconfig when GCC that defaults to 32-bit is used to build the 64-bit kernel - suppress new noisy Clang warnings -Wpointer-to-enum-cast - move the namespace field in Module.symvers for the backward compatibility reason for the depmod tool - use available compression for initramdisk when INTRAMFS_SOURCE is defined, which was the original behavior - fix modpost to handle correct large section numbers when it refers to modversion CRCs and module namespaces - fix comments and documents * tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts/kallsyms: fix wrong kallsyms_relative_base modpost: Get proper section index by get_secindex() instead of st_shndx initramfs: restore default compression behavior modpost: move the namespace field in Module.symvers last kbuild: Disable -Wpointer-to-enum-cast kbuild: doc: fix references to other documents int128: fix __uint128_t compiler test in Kconfig kconfig: introduce m32-flag and m64-flag kbuild: Fix inconsistent comment 19 March 2020, 16:57:48 UTC
5d89291 Corentin Labbe 18 March 2020, 15:26:49 UTC rtc: max8907: add missing select REGMAP_IRQ I have hit the following build error: armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe': rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq' max8907 should select REGMAP_IRQ Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 March 2020, 16:55:25 UTC
7883a14 Mikhail Petrov 11 March 2020, 20:37:09 UTC scripts/kallsyms: fix wrong kallsyms_relative_base There is the code in the read_symbol function in 'scripts/kallsyms.c': if (is_ignored_symbol(name, type)) return NULL; /* Ignore most absolute/undefined (?) symbols. */ if (strcmp(name, "_text") == 0) _text = addr; But the is_ignored_symbol function returns true for name="_text" and type='A'. So the next condition is not executed and the _text variable is always zero. It makes the wrong kallsyms_relative_base symbol as a result of the code (CONFIG_KALLSYMS_BASE_RELATIVE is defined): if (base_relative) { output_label("kallsyms_relative_base"); output_address(relative_base); printf("\n"); } Because the output_address function uses the _text variable. So the kallsyms_lookup function and all related functions in the kernel do not work properly. For example, the stack trace in oops: Call Trace: [aa095e58] [809feab8] kobj_ns_ops_tbl+0x7ff09ac8/0x7ff1c1c4 (unreliable) [aa095e98] [80002b64] kobj_ns_ops_tbl+0x7f50db74/0x80000010 [aa095ef8] [809c3d24] kobj_ns_ops_tbl+0x7feced34/0x7ff1c1c4 [aa095f28] [80002ed0] kobj_ns_ops_tbl+0x7f50dee0/0x80000010 [aa095f38] [8000f238] kobj_ns_ops_tbl+0x7f51a248/0x80000010 The right stack trace: Call Trace: [aa095e58] [809feab8] module_vdu_video_init+0x2fc/0x3bc (unreliable) [aa095e98] [80002b64] do_one_initcall+0x40/0x1f0 [aa095ef8] [809c3d24] kernel_init_freeable+0x164/0x1d8 [aa095f28] [80002ed0] kernel_init+0x14/0x124 [aa095f38] [8000f238] ret_from_kernel_thread+0x14/0x1c [masahiroy@kernel.org: This issue happens on binutils <= 2.22 The following commit fixed it: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d2667025dd30611514810c28bee9709e4623012a The symbol type of _text is 'T' on binutils >= 2.23 The minimal supported binutils version for the kernel build is 2.21 ] Signed-off-by: Mikhail Petrov <Mikhail.Petrov@mir.dev> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 19 March 2020, 14:40:20 UTC
c835578 Will Deacon 18 March 2020, 20:38:29 UTC arm64: kpti: Fix "kpti=off" when KASLR is enabled Enabling KASLR forces the use of non-global page-table entries for kernel mappings, as this is a decision that we have to make very early on before mapping the kernel proper. When used in conjunction with the "kpti=off" command-line option, it is possible to use non-global kernel mappings but with the kpti trampoline disabled. Since commit 09e3c22a86f6 ("arm64: Use a variable to store non-global mappings decision"), arm64_kernel_unmapped_at_el0() reflects only the use of non-global mappings and does not take into account whether the kpti trampoline is enabled. This breaks context switching of the TPIDRRO_EL0 register for 64-bit tasks, where the clearing of the register is deferred to the ret-to-user code, but it also breaks the ARM SPE PMU driver which helpfully recommends passing "kpti=off" on the command line! Report whether or not KPTI is actually enabled in arm64_kernel_unmapped_at_el0() and check the 'arm64_use_ng_mappings' global variable directly when determining the protection flags for kernel mappings. Cc: Mark Brown <broonie@kernel.org> Reported-by: Hongbo Yao <yaohongbo@huawei.com> Tested-by: Hongbo Yao <yaohongbo@huawei.com> Fixes: 09e3c22a86f6 ("arm64: Use a variable to store non-global mappings decision") Signed-off-by: Will Deacon <will@kernel.org> 19 March 2020, 08:28:43 UTC
0f08b31 Dave Airlie 19 March 2020, 01:47:41 UTC Merge tag 'drm-misc-fixes-2020-03-18-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - drm/lease: fix WARNING in idr_destroy - Fix AVI frame colorimetry in the dw-hdmi bridge. - Fix compiler warning in komeda by annotating functions as __maybe_unused. - Downgrade bochs pci_request_region failure from error to warning to workaround firmware fb. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7654ac39-deb8-c9ca-9fd5-ef77b2636380@linux.intel.com 19 March 2020, 01:49:28 UTC
a3c33e7 James Zhu 18 March 2020, 21:12:12 UTC drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check fix typo for vcn2.5/jpeg2.5 idle check Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 18 March 2020, 22:21:57 UTC
b5689d2 James Zhu 18 March 2020, 21:10:56 UTC drm/amdgpu: fix typo for vcn2/jpeg2 idle check fix typo for vcn2/jpeg2 idle check Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 18 March 2020, 22:21:45 UTC
acfc62d James Zhu 18 March 2020, 21:09:05 UTC drm/amdgpu: fix typo for vcn1 idle check fix typo for vcn1 idle check Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 18 March 2020, 22:21:18 UTC
dcf23ac Linus Torvalds 18 March 2020, 11:52:21 UTC locks: reinstate locks_delete_block optimization There is measurable performance impact in some synthetic tests due to commit 6d390e4b5d48 (locks: fix a potential use-after-free problem when wakeup a waiter). Fix the race condition instead by clearing the fl_blocker pointer after the wake_up, using explicit acquire/release semantics. This does mean that we can no longer use the clearing of fl_blocker as the wait condition, so switch the waiters over to checking whether the fl_blocked_member list_head is empty. Reviewed-by: yangerkun <yangerkun@huawei.com> Reviewed-by: NeilBrown <neilb@suse.de> Fixes: 6d390e4b5d48 (locks: fix a potential use-after-free problem when wakeup a waiter) Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 March 2020, 20:03:38 UTC
4b8a5cf Xiao Yang 18 March 2020, 10:34:16 UTC modpost: Get proper section index by get_secindex() instead of st_shndx (uint16_t) st_shndx is limited to 65535(i.e. SHN_XINDEX) so sym_get_data() gets wrong section index by st_shndx if requested symbol contains extended section index that is more than 65535. In this case, we need to get proper section index by .symtab_shndx section. Module.symvers generated by building kernel with "-ffunction-sections -fdata-sections" shows the issue. Fixes: 56067812d5b0 ("kbuild: modversions: add infrastructure for emitting relative CRCs") Fixes: e84f9fbbece1 ("modpost: refactor namespace_from_kstrtabns() to not hard-code section name") Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 18 March 2020, 16:44:25 UTC
5076190 Linus Torvalds 17 March 2020, 18:04:09 UTC mm: slub: be more careful about the double cmpxchg of freelist This is just a cleanup addition to Jann's fix to properly update the transaction ID for the slub slowpath in commit fd4d9c7d0c71 ("mm: slub: add missing TID bump.."). The transaction ID is what protects us against any concurrent accesses, but we should really also make sure to make the 'freelist' comparison itself always use the same freelist value that we then used as the new next free pointer. Jann points out that if we do all of this carefully, we could skip the transaction ID update for all the paths that only remove entries from the lists, and only update the TID when adding entries (to avoid the ABA issue with cmpxchg and list handling re-adding a previously seen value). But this patch just does the "make sure to cmpxchg the same value we used" rather than then try to be clever. Acked-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 March 2020, 16:40:32 UTC
fd4d9c7 Jann Horn 17 March 2020, 00:28:45 UTC mm: slub: add missing TID bump in kmem_cache_alloc_bulk() When kmem_cache_alloc_bulk() attempts to allocate N objects from a percpu freelist of length M, and N > M > 0, it will first remove the M elements from the percpu freelist, then call ___slab_alloc() to allocate the next element and repopulate the percpu freelist. ___slab_alloc() can re-enable IRQs via allocate_slab(), so the TID must be bumped before ___slab_alloc() to properly commit the freelist head change. Fix it by unconditionally bumping c->tid when entering the slowpath. Cc: stable@vger.kernel.org Fixes: ebe909e0fdb3 ("slub: improve bulk alloc strategy") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 March 2020, 16:21:51 UTC
b216a8e Qiujun Huang 18 March 2020, 07:53:50 UTC drm/lease: fix WARNING in idr_destroy drm_lease_create takes ownership of leases. And leases will be released by drm_master_put. drm_master_put ->drm_master_destroy ->idr_destroy So we needn't call idr_destroy again. Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com 18 March 2020, 13:42:18 UTC
6e622cd Eric Biggers 24 February 2020, 18:20:44 UTC tty: fix compat TIOCGSERIAL checking wrong function ptr Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start checking for the presence of the ->set_serial function pointer rather than ->get_serial. This appears to be a copy-and-paste error, since ->get_serial is the function pointer that is called as well as the pointer that is checked by the non-compat version of TIOCGSERIAL. Fix this by checking the correct function pointer. Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200224182044.234553-3-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 March 2020, 12:15:13 UTC
1732956 Eric Biggers 24 February 2020, 18:20:43 UTC tty: fix compat TIOCGSERIAL leaking uninitialized memory Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start copying a whole 'serial_struct32' to userspace rather than individual fields, but failed to initialize all padding and fields -- namely the hole after the 'iomem_reg_shift' field, and the 'reserved' field. Fix this by initializing the struct to zero. [v2: use sizeof, and convert the adjacent line for consistency.] Reported-by: syzbot+8da9175e28eadcb203ce@syzkaller.appspotmail.com Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200224182044.234553-2-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 March 2020, 12:15:13 UTC
ed06982 Eric Biggers 24 February 2020, 07:33:59 UTC tty: drop outdated comments about release_tty() locking The current version of the TTY code unlocks the tty_struct(s) before release_tty() rather than after. Moreover, tty_unlock_pair() no longer exists. Thus, remove the outdated comments regarding tty_unlock_pair(). Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200224073359.292795-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 March 2020, 12:08:45 UTC
4686392 Ricky Wu 16 March 2020, 02:52:32 UTC mmc: rtsx_pci: Fix support for speed-modes that relies on tuning The TX/RX register should not be treated the same way to allow for better support of tuning. Fix this by using a default initial value for TX. Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200316025232.1167-1-ricky_wu@realtek.com [Ulf: Updated changelog] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 March 2020, 10:55:02 UTC
add492d Alexander Shishkin 17 March 2020, 06:22:15 UTC intel_th: pci: Add Elkhart Lake CPU support This adds support for the Trace Hub in Elkhart Lake CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200317062215.15598-7-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 March 2020, 10:32:56 UTC
ce666be Alexander Shishkin 17 March 2020, 06:22:14 UTC intel_th: Fix user-visible error codes There are a few places in the driver that end up returning ENOTSUPP to the user, replace those with EINVAL. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: ba82664c134ef ("intel_th: Add Memory Storage Unit driver") Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20200317062215.15598-6-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 March 2020, 10:32:56 UTC
885f123 Alexander Shishkin 17 March 2020, 06:22:13 UTC intel_th: msu: Fix the unexpected state warning The unexpected state warning should only warn on illegal state transitions. Fix that. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 615c164da0eb4 ("intel_th: msu: Introduce buffer interface") Cc: stable@vger.kernel.org # v5.4+ Link: https://lore.kernel.org/r/20200317062215.15598-5-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 March 2020, 10:32:56 UTC
283f87c Alexander Shishkin 17 March 2020, 06:22:11 UTC stm class: sys-t: Fix the use of time_after() The operands of time_after() are in a wrong order in both instances in the sys-t driver. Fix that. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 39f10239df75 ("stm class: p_sys-t: Add support for CLOCKSYNC packets") Fixes: d69d5e83110f ("stm class: Add MIPI SyS-T protocol support") Cc: stable@vger.kernel.org # v4.20+ Link: https://lore.kernel.org/r/20200317062215.15598-3-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 18 March 2020, 10:32:55 UTC
14800df Greg Kroah-Hartman 18 March 2020, 10:20:42 UTC Merge tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes in the 5.6 cycle. * adxl372 - Fix marking of buffered values as big endian. * ak8974 - Fix wrong handling of negative values when read from sysfs. * at91-sama5d2 - Fix differential mode by ensuring configuration set correctly. * ping - Use the write sensor type for of_ping_match table. * sps30 - Kconfig build dependency fix. * st-sensors - Fix a wrong identification of which part the SMO8840 ACPI ID indicates. * stm32-dsfdm - Fix a sleep in atomic issue by not using a trigger when it makes no sense. * stm32-timer - Make sure master mode is disabled when stopping. * vcnl400 - Update some sampling periods based on new docs. * tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: ping: set pa_laser_ping_cfg in of_ping_match iio: chemical: sps30: fix missing triggered buffer dependency iio: st_sensors: remap SMO8840 to LIS2DH12 iio: light: vcnl4000: update sampling periods for vcnl4040 iio: light: vcnl4000: update sampling periods for vcnl4200 iio: accel: adxl372: Set iio_chan BE iio: magnetometer: ak8974: Fix negative raw values in sysfs iio: trigger: stm32-timer: disable master mode when stopping iio: adc: stm32-dfsdm: fix sleep in atomic context iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode 18 March 2020, 10:20:42 UTC
2866ce8 Greg Kroah-Hartman 18 March 2020, 09:42:57 UTC Merge tag 'usb-serial-5.6-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.6-rc7 Here are a couple of new device ids for 5.6-rc. All have been in linux-next with no reported issues. * tag 'usb-serial-5.6-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: pl2303: add device-id for HP LD381 USB: serial: option: add ME910G1 ECM composition 0x110b 18 March 2020, 09:42:57 UTC
f50b7da Cristian Marussi 11 March 2020, 17:12:45 UTC arm64: smp: fix crash_smp_send_stop() behaviour On a system configured to trigger a crash_kexec() reboot, when only one CPU is online and another CPU panics while starting-up, crash_smp_send_stop() will fail to send any STOP message to the other already online core, resulting in fail to freeze and registers not properly saved. Moreover even if the proper messages are sent (case CPUs > 2) it will similarly fail to account for the booting CPU when executing the final stop wait-loop, so potentially resulting in some CPU not been waited for shutdown before rebooting. A tangible effect of this behaviour can be observed when, after a panic with kexec enabled and loaded, on the following reboot triggered by kexec, the cpu that could not be successfully stopped fails to come back online: [ 362.291022] ------------[ cut here ]------------ [ 362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 362.292400] Modules linked in: [ 362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105 [ 362.293136] Hardware name: Foundation-v8A (DT) [ 362.293382] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 362.294063] pc : has_cpuid_feature+0xf0/0x348 [ 362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 362.294280] sp : ffff800011b1bf60 [ 362.294362] x29: ffff800011b1bf60 x28: 0000000000000000 [ 362.294534] x27: 0000000000000000 x26: 0000000000000000 [ 362.294631] x25: 0000000000000000 x24: ffff80001189a25c [ 362.294718] x23: 0000000000000000 x22: 0000000000000000 [ 362.294803] x21: ffff8000114aa018 x20: ffff800011156a00 [ 362.294897] x19: ffff800010c944a0 x18: 0000000000000004 [ 362.294987] x17: 0000000000000000 x16: 0000000000000000 [ 362.295073] x15: 00004e53b831ae3c x14: 00004e53b831ae3c [ 362.295165] x13: 0000000000000384 x12: 0000000000000000 [ 362.295251] x11: 0000000000000000 x10: 00400032b5503510 [ 362.295334] x9 : 0000000000000000 x8 : ffff800010c7e204 [ 362.295426] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 362.295508] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 362.295592] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 362.295683] x1 : 0000000000180420 x0 : 0000000000180480 [ 362.296011] Call trace: [ 362.296257] has_cpuid_feature+0xf0/0x348 [ 362.296350] verify_local_elf_hwcaps+0x84/0xe8 [ 362.296424] check_local_cpu_capabilities+0x44/0x128 [ 362.296497] secondary_start_kernel+0xf4/0x188 [ 362.296998] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 362.298652] SMP: stopping secondary CPUs [ 362.300615] Starting crashdump kernel... [ 362.301168] Bye! [ 0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0] [ 0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020 [ 0.000000] Machine model: Foundation-v8A [ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled ..... [ 0.138024] rcu: Hierarchical SRCU implementation. [ 0.153472] its@2f020000: unable to locate ITS domain [ 0.154078] its@2f020000: Unable to locate ITS domain [ 0.157541] EFI services will not be available. [ 0.175395] smp: Bringing up secondary CPUs ... [ 0.209182] psci: failed to boot CPU1 (-22) [ 0.209377] CPU1: failed to boot: -22 [ 0.274598] Detected PIPT I-cache on CPU2 [ 0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000 [ 0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0] [ 0.369053] Detected PIPT I-cache on CPU3 [ 0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000 [ 0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0] [ 0.401707] smp: Brought up 1 node, 3 CPUs [ 0.404057] SMP: Total of 3 processors activated. Make crash_smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way the right number of STOPs is sent and all other stopped-cores's registers are properly saved. Fixes: 78fd584cdec05 ("arm64: kdump: implement machine_crash_shutdown()") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org> 17 March 2020, 22:51:19 UTC
d0bab0c Cristian Marussi 11 March 2020, 17:12:44 UTC arm64: smp: fix smp_send_stop() behaviour On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c16a16c ("arm64: SMP support") Reported-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org> 17 March 2020, 22:51:18 UTC
b401f8c Anthony Mallet 12 March 2020, 13:31:01 UTC USB: cdc-acm: fix rounding error in TIOCSSERIAL By default, tty_port_init() initializes those parameters to a multiple of HZ. For instance in line 69 of tty_port.c: port->close_delay = (50 * HZ) / 100; https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69 With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04 linux-image-4.15.0-37-generic), the default setting for close_delay is thus 125. When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then executed with the same setting '12', the value is interpreted as '120' which is different from the current setting and a EPERM error may be raised by set_serial_info() if !CAP_SYS_ADMIN. https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919 Fixes: ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 March 2020, 19:27:08 UTC
633e2b2 Anthony Mallet 12 March 2020, 13:31:00 UTC USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL close_delay and closing_wait are specified in hundredth of a second but stored internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies() functions to convert from each other. Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-1-anthony.mallet@laas.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 March 2020, 19:27:08 UTC
75d7676 Hans de Goede 13 March 2020, 12:07:08 UTC usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters We have been receiving bug reports that ethernet connections over RTL8153 based ethernet adapters stops working after a while with errors like these showing up in dmesg when the ethernet stops working: [12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout [12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout [12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1 docks and with generic USB to ethernet dongles using the RTL8153 chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to the kernel commandline and all users who have tried this report that this fixes this. Also note that we already have an existing NO_LPM quirk for the RTL8153 used in the Microsoft Surface Dock (where it uses a different usb-id). This commit adds a NO_LPM quirk for the generic Realtek RTL8153 0bda:8153 usb-id, fixing the Tx timeout errors on these devices. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931 Cc: stable@vger.kernel.org Cc: russianneuromancer@ya.ru Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200313120708.100339-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 March 2020, 19:26:13 UTC
7368760 Peter Chen 16 March 2020, 03:10:34 UTC usb: chipidea: udc: fix sleeping function called from invalid context The code calls pm_runtime_get_sync with irq disabled, it causes below warning: BUG: sleeping function called from invalid context at wer/runtime.c:1075 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: er/u8:1 CPU: 1 PID: 37 Comm: kworker/u8:1 Not tainted 20200304-00181-gbebfd2a5be98 #1588 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: ci_otg ci_otg_work [<c010e8bd>] (unwind_backtrace) from [<c010a315>] 1/0x14) [<c010a315>] (show_stack) from [<c0987d29>] 5/0x94) [<c0987d29>] (dump_stack) from [<c013e77f>] +0xeb/0x118) [<c013e77f>] (___might_sleep) from [<c052fa1d>] esume+0x75/0x78) [<c052fa1d>] (__pm_runtime_resume) from [<c0627a33>] 0x23/0x74) [<c0627a33>] (ci_udc_pullup) from [<c062fb93>] nect+0x2b/0xcc) [<c062fb93>] (usb_gadget_connect) from [<c062769d>] _connect+0x59/0x104) [<c062769d>] (ci_hdrc_gadget_connect) from [<c062778b>] ssion+0x43/0x48) [<c062778b>] (ci_udc_vbus_session) from [<c062f997>] s_connect+0x17/0x9c) [<c062f997>] (usb_gadget_vbus_connect) from [<c062634d>] bd/0x128) [<c062634d>] (ci_otg_work) from [<c0134719>] rk+0x149/0x404) [<c0134719>] (process_one_work) from [<c0134acb>] 0xf7/0x3bc) [<c0134acb>] (worker_thread) from [<c0139433>] x118) [<c0139433>] (kthread) from [<c01010bd>] (ret_from_fork+0x11/0x34) Tested-by: Dmitry Osipenko <digetx@gmail.com> Cc: <stable@vger.kernel.org> #v5.5 Fixes: 72dc8df7920f ("usb: chipidea: udc: protect usb interrupt enable") Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200316031034.17847-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 March 2020, 19:24:28 UTC
979a266 Murphy Zhou 14 March 2020, 03:38:31 UTC CIFS: fiemap: do not return EINVAL if get nothing If we call fiemap on a truncated file with none blocks allocated, it makes sense we get nothing from this call. No output means no blocks have been counted, but the call succeeded. It's a valid response. Simple example reproducer: xfs_io -f 'truncate 2M' -c 'fiemap -v' /cifssch/testfile xfs_io: ioctl(FS_IOC_FIEMAP) ["/cifssch/testfile"]: Invalid argument Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> 17 March 2020, 18:27:06 UTC
1be1fa4 Shyam Prasad N 09 March 2020, 08:35:09 UTC CIFS: Increment num_remote_opens stats counter even in case of smb2_query_dir_first The num_remote_opens counter keeps track of the number of open files which must be maintained by the server at any point. This is a per-tree-connect counter, and the value of this counter gets displayed in the /proc/fs/cifs/Stats output as a following... Open files: 0 total (local), 1 open on server ^^^^^^^^^^^^^^^^ As a thumb-rule, we want to increment this counter for each open/create that we successfully execute on the server. Similarly, we should decrement the counter when we successfully execute a close. In this case, an increment was being missed in case of smb2_query_dir_first, in case of successful open. As a result, we would underflow the counter and we could even see the counter go to negative after sufficient smb2_query_dir_first calls. I tested the stats counter for a bunch of filesystem operations with the fix. And it looks like the counter looks correct to me. I also check if we missed the increments and decrements elsewhere. It does not seem so. Few other cases where an open is done and we don't increment the counter are the compound calls where the corresponding close is also sent in the request. Signed-off-by: Shyam Prasad N <nspmangalore@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> 17 March 2020, 18:27:03 UTC
3994688 Dan Carpenter 28 February 2020, 09:22:59 UTC cifs: potential unintitliazed error code in cifs_getattr() Smatch complains that "rc" could be uninitialized. fs/cifs/inode.c:2206 cifs_getattr() error: uninitialized symbol 'rc'. Changing it to "return 0;" improves readability as well. Fixes: cc1baf98c8f6 ("cifs: do not ignore the SYNC flags in getattr") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> 17 March 2020, 18:26:26 UTC
a124458 Jian-Hong Pan 17 March 2020, 08:28:09 UTC ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662 A headset on the desktop like Acer N50-600 does not work, until quirk ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200317082806.73194-3-jian-hong@endlessm.com Signed-off-by: Takashi Iwai <tiwai@suse.de> 17 March 2020, 17:06:19 UTC
d858c70 Jian-Hong Pan 17 March 2020, 08:28:07 UTC ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662 The Acer desktop X2660G with ALC662 can't detect the headset microphone until ALC662_FIXUP_ACER_X2660G_HEADSET_MODE quirk applied. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200317082806.73194-2-jian-hong@endlessm.com Signed-off-by: Takashi Iwai <tiwai@suse.de> 17 March 2020, 17:05:52 UTC
ac309e7 Linus Torvalds 17 March 2020, 16:38:03 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - string buffer formatting fixes in picolcd and sensor drivers, from Takashi Iwai - two new device IDs from Chen-Tsung Hsieh and Tony Fischetti * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: add ALWAYS_POLL quirk to lenovo pixart mouse HID: google: add moonball USB id HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow 17 March 2020, 16:38:03 UTC
bb5786b Michael Straube 12 March 2020, 09:36:52 UTC staging: rtl8188eu: Add device id for MERCUSYS MW150US v2 This device was added to the stand-alone driver on github. Add it to the staging driver as well. Link: https://github.com/lwfinger/rtl8188eu/commit/2141f244c3e7 Signed-off-by: Michael Straube <straube.linux@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312093652.13918-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 March 2020, 13:17:32 UTC
ae62cf5 Johan Hovold 12 March 2020, 11:01:51 UTC staging: greybus: loopback_test: fix potential path truncations Newer GCC warns about possible truncations of two generated path names as we're concatenating the configurable sysfs and debugfs path prefixes with a filename and placing the results in buffers of the same size as the maximum length of the prefixes. snprintf(d->name, MAX_STR_LEN, "gb_loopback%u", dev_id); snprintf(d->sysfs_entry, MAX_SYSFS_PATH, "%s%s/", t->sysfs_prefix, d->name); snprintf(d->debugfs_entry, MAX_SYSFS_PATH, "%sraw_latency_%s", t->debugfs_prefix, d->name); Fix this by separating the maximum path length from the maximum prefix length and reducing the latter enough to fit the generated strings. Note that we also need to reduce the device-name buffer size as GCC isn't smart enough to figure out that we ever only used MAX_STR_LEN bytes of it. Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback") Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200312110151.22028-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 March 2020, 13:17:32 UTC
f160238 Johan Hovold 12 March 2020, 11:01:50 UTC staging: greybus: loopback_test: fix potential path truncation Newer GCC warns about a possible truncation of a generated sysfs path name as we're concatenating a directory path with a file name and placing the result in a buffer that is half the size of the maximum length of the directory path (which is user controlled). loopback_test.c: In function 'open_poll_files': loopback_test.c:651:31: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size 255 [-Wformat-truncation=] 651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count"); | ^~ loopback_test.c:651:3: note: 'snprintf' output between 16 and 527 bytes into a destination of size 255 651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count"); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by making sure the buffer is large enough the concatenated strings. Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback") Fixes: 9250c0ee2626 ("greybus: Loopback_test: use poll instead of inotify") Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200312110151.22028-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 March 2020, 13:17:32 UTC
8f3675b Johan Hovold 12 March 2020, 11:01:49 UTC staging: greybus: loopback_test: fix poll-mask build breakage A scripted conversion from userland POLL* to kernel EPOLL* constants mistakingly replaced the poll flags in the loopback_test tool, which therefore no longer builds. Fixes: a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement") Cc: stable <stable@vger.kernel.org> # 4.16 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200312110151.22028-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 17 March 2020, 13:17:32 UTC
53dd0a7 Michał Mirosław 15 March 2020, 16:44:25 UTC mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2 SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least SAMA5D27 doesn't). Fix this by forcing card-detect in the module if module-controlled CD is not used. Fixed commit addresses the problem only for non-removable cards. This amends it to also cover gpio-cd case. Cc: stable@vger.kernel.org Fixes: 7a1e3f143176 ("mmc: sdhci-of-at91: force card detect value for non removable devices") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 17 March 2020, 11:28:18 UTC
18b587b Masahiro Yamada 12 March 2020, 10:42:57 UTC mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier The SDHCI_PRESET_FOR_* registers are not set for the UniPhier platform integration. (They are all read as zeros). Set the SDHCI_QUIRK2_PRESET_VALUE_BROKEN quirk flag. Otherwise, the High Speed DDR mode on the eMMC controller (MMC_TIMING_MMC_DDR52) would not work. I split the platform data to give no impact to other platforms, although the UniPhier platform is currently only the upstream user of this IP. The SDHCI_QUIRK2_PRESET_VALUE_BROKEN flag is set if the compatible string matches to "socionext,uniphier-sd4hc". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200312104257.21017-1-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 17 March 2020, 11:25:29 UTC
3397b25 Hans de Goede 16 March 2020, 18:47:53 UTC mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012) On the Acer Aspire Switch 10 (SW5-012) microSD slot always reports the card being write-protected even though microSD cards do not have a write-protect switch at all. Add a new DMI_QUIRK_SD_NO_WRITE_PROTECT quirk which when set sets the MMC_CAP2_NO_WRITE_PROTECT flag on the controller for the external SD slot; and add a DMI quirk table entry which selects this quirk for the Acer SW5-012. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200316184753.393458-2-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 17 March 2020, 11:21:21 UTC
84d49b3 Hans de Goede 16 March 2020, 18:47:52 UTC mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320 Based on a sample of 7 DSDTs from Cherry Trail devices using an AXP288 PMIC depending on the design one of 2 possible LDOs on the PMIC is used for the MMC signalling voltage, either DLDO3 or GPIO1LDO (GPIO1 pin in low noise LDO mode). The Lenovo Miix 320-10ICR uses GPIO1LDO in the SHC1 ACPI device's DSM methods to set 3.3 or 1.8 signalling voltage and this appears to work as advertised, so presumably the device is actually using GPIO1LDO for the external microSD signalling voltage. But this device has a bug in the _PS0 method of the SHC1 ACPI device, the DSM remembers the last set signalling voltage and the _PS0 restores this after a (runtime) suspend-resume cycle, but it "restores" the voltage on DLDO3 instead of setting it on GPIO1LDO as the DSM method does. DLDO3 is used for the LCD and setting it to 1.8V causes the LCD to go black. This commit works around this issue by calling the Intel DSM to reset the signal voltage to 3.3V after the host has been runtime suspended. This will make the _PS0 method reprogram the DLDO3 voltage to 3.3V, which leaves it at its original setting fixing the LCD going black. This commit adds and uses a DMI quirk mechanism to only trigger this workaround on the Lenovo Miix 320 while leaving the behavior of the driver unchanged on other devices. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=111294 BugLink: https://gitlab.freedesktop.org/drm/intel/issues/355 Reported-by: russianneuromancer <russianneuromancer@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200316184753.393458-1-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 17 March 2020, 11:20:50 UTC
785d74e Eugeniy Paltsev 16 March 2020, 11:25:19 UTC initramfs: restore default compression behavior Even though INITRAMFS_SOURCE kconfig option isn't set in most of defconfigs it is used (set) extensively by various build systems. Commit f26661e12765 ("initramfs: make initramfs compression choice non-optional") has changed default compression mode. Previously we compress initramfs using available compression algorithm. Now we don't use any compression at all by default. It significantly increases the image size in case of build system chooses embedded initramfs. Initially I faced with this issue while using buildroot. As of today it's not possible to set preferred compression mode in target defconfig as this option depends on INITRAMFS_SOURCE being set. Modification of all build systems either doesn't look like good option. Let's instead rewrite initramfs compression mode choices list the way that "INITRAMFS_COMPRESSION_NONE" will be the last option in the list. In that case it will be chosen only if all other options (which implements any compression) are not available. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 17 March 2020, 00:50:37 UTC
5190044 Jessica Yu 11 March 2020, 17:01:20 UTC modpost: move the namespace field in Module.symvers last In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module). In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now. Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow. Cc: stable@vger.kernel.org Fixes: cb9b55d21fe0 ("modpost: add support for symbol namespaces") Tested-by: Matthias Maennich <maennich@google.com> Reviewed-by: Matthias Maennich <maennich@google.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 16 March 2020, 23:59:03 UTC
3d135f5 Linus Torvalds 16 March 2020, 22:39:52 UTC Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: - allow use of ARMv8 arch timer in 32-bit VDSO - rename missed .fixup section - fix kbuild issue with stack protector GCC plugin * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8961/2: Fix Kbuild issue caused by per-task stack protector GCC plugin ARM: 8958/1: rename missed uaccess .fixup section ARM: 8957/1: VDSO: Match ARMv8 timer in cntvct_functional() 16 March 2020, 22:39:52 UTC
819d578 Tony Fischetti 12 March 2020, 16:16:06 UTC HID: add ALWAYS_POLL quirk to lenovo pixart mouse A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction where it disconnects and reconnects every minute--each time incrementing the device number. This patch adds the device id of the device and specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to work properly. Signed-off-by: Tony Fischetti <tony.fischetti@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 16 March 2020, 21:33:20 UTC
58322a1 Chen-Tsung Hsieh 16 March 2020, 07:24:19 UTC HID: google: add moonball USB id Add 1 additional hammer-like device. Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 16 March 2020, 13:51:05 UTC
fe8b708 Matt Roper 11 March 2020, 16:22:55 UTC drm/i915: Handle all MCR ranges The bspec documents multiple MCR ranges; make sure they're all captured by the driver. Bspec: 13991, 52079 Fixes: 592a7c5e082e ("drm/i915: Extend non readable mcr range") Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-2-matthew.d.roper@intel.com Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit 415d1269975d3fc21c13a6ae8de7b5fe0e6febb1) Signed-off-by: Jani Nikula <jani.nikula@intel.com> 16 March 2020, 10:17:00 UTC
c09f6b4 Caz Yokoyama 04 March 2020, 22:13:59 UTC Revert "drm/i915/tgl: Add extra hdc flush workaround" This reverts commit 36a6b5d964d995b536b1925ec42052ee40ba92c4. The commit takes care Wa_1604544889 which was fixed on a0 stepping based on a0 replan. So no SW workaround is required on any stepping now. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: 36a6b5d964d9 ("drm/i915/tgl: Add extra hdc flush workaround") Link: https://patchwork.freedesktop.org/patch/msgid/1c751032ce79c80c5485cae315f1a9904ce07cac.1583359940.git.caz.yokoyama@intel.com (cherry picked from commit 175c4d9b3b9a60b4ea0b8cd034011808c6a03b05) Signed-off-by: Jani Nikula <jani.nikula@intel.com> 16 March 2020, 10:17:00 UTC
9777d8b Chris Wilson 11 March 2020, 09:26:23 UTC drm/i915/execlists: Track active elements during dequeue Record the initial active element we use when building the next ELSP submission, so that we can compare against it latter to see if there's no change. Fixes: 44d0a9c05bc0 ("drm/i915/execlists: Skip redundant resubmission") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-2-chris@chris-wilson.co.uk (cherry picked from commit 60ef5b7ac6a131f09d287a5f156c878c2c926a30) Signed-off-by: Jani Nikula <jani.nikula@intel.com> 16 March 2020, 10:17:00 UTC
6c3171e Takashi Iwai 16 March 2020, 09:05:06 UTC ALSA: seq: oss: Fix running status after receiving sysex This is a similar bug like the previous case for virmidi: the invalid running status is kept after receiving a sysex message. Again the fix is to clear the running status after handling the sysex. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> 16 March 2020, 09:06:40 UTC
4384f16 Takashi Iwai 16 March 2020, 09:05:05 UTC ALSA: seq: virmidi: Fix running status after receiving sysex The virmidi driver handles sysex event exceptionally in a short-cut snd_seq_dump_var_event() call, but this missed the reset of the running status. As a result, it may lead to an incomplete command right after the sysex when an event with the same running status was queued. Fix it by clearing the running status properly via alling snd_midi_event_reset_decode() for that code path. Reported-by: Andreas Steinmetz <ast@domdv.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> 16 March 2020, 09:06:22 UTC
fb33c65 Linus Torvalds 15 March 2020, 22:01:23 UTC Linux 5.6-rc6 15 March 2020, 22:01:23 UTC
back to top