Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
4877846 Linus Torvalds 21 June 2020, 22:45:29 UTC Linux 5.8-rc2 21 June 2020, 22:45:29 UTC
817d914 Linus Torvalds 21 June 2020, 22:41:24 UTC Merge tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux fixes from Paul Moore: "Three small patches to fix problems in the SELinux code, all found via clang. Two patches fix potential double-free conditions and one fixes an undefined return value" * tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix undefined return of cond_evaluate_expr selinux: fix a double free in cond_read_node()/cond_read_list() selinux: fix double free 21 June 2020, 22:41:24 UTC
16f4aa9 Linus Torvalds 21 June 2020, 20:04:57 UTC Merge tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some early fixes collected during the first week after the merge window, all pretty self-evident, with the details below. The revert is the crucial thing. - Fix a warning on the Qualcomm SPMI GPIO chip being instatiated twice without a unique irqchip struct - Use the noirq variants of the suspend and resume callbacks in the Tegra driver - Clean up the errorpath on the MCP23s08 driver - Revert the use of devm_of_iomap() in the Freescale driver as it was regressing the platform - Add some missing pins in the Qualcomm IPQ6018 driver - Fix a simple documentation bug in the pinctrl-single driver" * tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: single: fix function name in documentation pinctrl: qcom: ipq6018 Add missing pins in qpic pin group Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'" pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings pinctrl: tegra: Use noirq suspend/resume callbacks pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage 21 June 2020, 20:04:57 UTC
be9160a Linus Torvalds 21 June 2020, 19:44:52 UTC Merge tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED - improve cc-option in scripts/Kbuild.include to clean up temp files - improve cc-option in scripts/Kconfig.include for more reliable compile option test - do not copy modules.builtin by 'make install' because it would break existing systems - use 'userprogs' syntax for watch_queue sample * tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: samples: watch_queue: build sample program for target architecture Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n" scripts: Fix typo in headers_install.sh kconfig: unify cc-option and as-option kbuild: improve cc-option to clean up all temporary files Makefile: Improve compressed debug info support detection 21 June 2020, 19:44:52 UTC
7561393 Linus Torvalds 21 June 2020, 17:02:53 UTC Merge tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - One fix for the interrupt rework we did last release which broke KVM-PR - Three commits fixing some fallout from the READ_ONCE() changes interacting badly with our 8xx 16K pages support, which uses a pte_t that is a structure of 4 actual PTEs - A cleanup of the 8xx pte_update() to use the newly added pmd_off() - A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is enabled - A minor fix for the SPU syscall generation Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike Rapoport, Nicholas Piggin. * tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/8xx: Provide ptep_get() with 16k pages mm: Allow arches to provide ptep_get() mm/gup: Use huge_ptep_get() in gup_hugepte() powerpc/syscalls: Use the number when building SPU syscall table powerpc/8xx: use pmd_off() to access a PMD entry in pte_update() powerpc/64s: Fix KVM interrupt using wrong save area powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL 21 June 2020, 17:02:53 UTC
93bbca2 Linus Torvalds 21 June 2020, 17:01:03 UTC Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - NULL dereference in octeontx - PM reference imbalance in ks-sa - deadlock in crypto manager - memory leak in drbg - missing socket limit check on receive SG list size in algif_skcipher - typos in caam - warnings in ccp and hisilicon * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: drbg - always try to free Jitter RNG instance crypto: marvell/octeontx - Fix a potential NULL dereference crypto: algboss - don't wait during notifier callback crypto: caam - fix typos crypto: ccp - Fix sparse warnings in sev-dev crypto: hisilicon - Cap block size at 2^31 crypto: algif_skcipher - Cap recv SG list at ctx->used hwrng: ks-sa - Fix runtime PM imbalance on error 21 June 2020, 17:01:03 UTC
214377e Masahiro Yamada 17 June 2020, 02:08:38 UTC samples: watch_queue: build sample program for target architecture This userspace program includes UAPI headers exported to usr/include/. 'make headers' always works for the target architecture (i.e. the same architecture as the kernel), so the sample program should be built for the target as well. Kbuild now supports 'userprogs' for that. I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because $(CC) may not provide libc. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 21 June 2020, 16:56:09 UTC
2c6d963 Masahiro Yamada 19 June 2020, 15:09:55 UTC Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n" This reverts commit e0b250b57dcf403529081e5898a9de717f96b76b, which broke build systems that need to install files to a certain path, but do not set INSTALL_MOD_PATH when invoking 'make install'. $ make INSTALL_PATH=/tmp/destdir install mkdir: cannot create directory ‘/lib/modules/5.8.0-rc1+/’: Permission denied Makefile:1342: recipe for target '_builtin_inst_' failed make: *** [_builtin_inst_] Error 1 While modules.builtin is useful also for CONFIG_MODULES=n, this change in the behavior is quite unexpected. Maybe "make modules_install" can install modules.builtin irrespective of CONFIG_MODULES as Jonas originally suggested. Anyway, that commit should be reverted ASAP. Reported-by: Douglas Anderson <dianders@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> 21 June 2020, 15:19:14 UTC
6467777 Linus Torvalds 21 June 2020, 02:23:13 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One minor fix and two patches reworking the ata dma drain for the !CONFIG_LIBATA case. The latter is a 5.7 regression fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA scsi: ufs-bsg: Fix runtime PM imbalance on error 21 June 2020, 02:23:13 UTC
a5c6a1f Linus Torvalds 21 June 2020, 02:18:27 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - a small collection of remaining API conversion patches (all acked) which allow to finally remove the deprecated API - some documentation fixes and a MAINTAINERS addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add robert and myself as qcom i2c cci maintainers i2c: smbus: Fix spelling mistake in the comments Documentation/i2c: SMBus start signal is S not A i2c: remove deprecated i2c_new_device API Documentation: media: convert to use i2c_new_client_device() video: backlight: tosa_lcd: convert to use i2c_new_client_device() x86/platform/intel-mid: convert to use i2c_new_client_device() drm: encoder_slave: use new I2C API drm: encoder_slave: fix refcouting error for modules 21 June 2020, 02:18:27 UTC
25fae75 Drew Fustini 12 June 2020, 11:27:58 UTC pinctrl: single: fix function name in documentation Use the correct the function name in the documentation for "pcs_parse_one_pinctrl_entry()". "smux_parse_one_pinctrl_entry()" appears to be an artifact from the development of a prior patch series ("simple pinmux driver") which transformed into pinctrl-single. Signed-off-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 20 June 2020, 20:41:32 UTC
8b6ddd1 Linus Torvalds 20 June 2020, 20:17:47 UTC Merge tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Have recordmcount work with > 64K sections (to support LTO) - kprobe RCU fixes - Correct a kprobe critical section with missing mutex - Remove redundant arch_disarm_kprobe() call - Fix lockup when kretprobe triggers within kprobe_flush_task() - Fix memory leak in fetch_op_data operations - Fix sleep in atomic in ftrace trace array sample code - Free up memory on failure in sample trace array code - Fix incorrect reporting of function_graph fields in format file - Fix quote within quote parsing in bootconfig - Fix return value of bootconfig tool - Add testcases for bootconfig tool - Fix maybe uninitialized warning in ftrace pid file code - Remove unused variable in tracing_iter_reset() - Fix some typos * tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix maybe-uninitialized compiler warning tools/bootconfig: Add testcase for show-command and quotes test tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig tools/bootconfig: Fix to use correct quotes for value proc/bootconfig: Fix to use correct quotes for value tracing: Remove unused event variable in tracing_iter_reset tracing/probe: Fix memleak in fetch_op_data operations trace: Fix typo in allocate_ftrace_ops()'s comment tracing: Make ftrace packed events have align of 1 sample-trace-array: Remove trace_array 'sample-instance' sample-trace-array: Fix sleeping function called from invalid context kretprobe: Prevent triggering kretprobe from within kprobe_flush_task kprobes: Remove redundant arch_disarm_kprobe() call kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex kprobes: Use non RCU traversal APIs on kprobe_tables if possible kprobes: Suppress the suspicious RCU warning on kprobes recordmcount: support >64k sections 20 June 2020, 20:17:47 UTC
eede2b9 Linus Torvalds 20 June 2020, 20:13:21 UTC Merge tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "A feature (papr_scm health retrieval) and a fix (sysfs attribute visibility) for v5.8. Vaibhav explains in the merge commit below why missing v5.8 would be painful and I agreed to try a -rc2 pull because only cosmetics kept this out of -rc1 and his initial versions were posted in more than enough time for v5.8 consideration: 'These patches are tied to specific features that were committed to customers in upcoming distros releases (RHEL and SLES) whose time-lines are tied to 5.8 kernel release. Being able to track the health of an nvdimm is critical for our customers that are running workloads leveraging papr-scm nvdimms. Missing the 5.8 kernel would mean missing the distro timelines and shifting forward the availability of this feature in distro kernels by at least 6 months' Summary: - Fix the visibility of the region 'align' attribute. The new unit tests for region alignment handling caught a corner case where the alignment cannot be specified if the region is converted from static to dynamic provisioning at runtime. - Add support for device health retrieval for the persistent memory supported by the papr_scm driver. This includes both the standard sysfs "health flags" that the nfit persistent memory driver publishes and a mechanism for the ndctl tool to retrieve a health-command payload" * tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/region: always show the 'align' attribute powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl() powerpc/papr_scm: Fetch nvdimm health information from PHYP seq_buf: Export seq_buf_printf powerpc: Document details on H_SCM_HEALTH hcall 20 June 2020, 20:13:21 UTC
7f5f4de Sivaprakash Murugesan 19 June 2020, 04:31:29 UTC pinctrl: qcom: ipq6018 Add missing pins in qpic pin group The patch adds missing qpic data pins to qpic pingroup. These pins are necessary for the qpic nand to work. Fixes: ef1ea54eab0e ("pinctrl: qcom: Add ipq6018 pinctrl driver") Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 20 June 2020, 20:05:24 UTC
13f2d25 Haibo Chen 09 June 2020, 03:27:03 UTC Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'" This reverts commit ba403242615c2c99e27af7984b1650771a2cc2c9. After commit 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support"). i.MX7D has two iomux controllers iomuxc and iomuxc-lpsr which share select_input register for daisy chain settings. If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call devm_request_mem_region() for the region <0x30330000-0x3033ffff> for the first time. Then, next time when probe the iomuxc, API devm_platform_ioremap_resource() will also use the API devm_request_mem_region() for the share region <0x30330000-0x3033ffff> again, then cause issue, log like below: [ 0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver [ 0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff] [ 0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16 Fixes: ba403242615c ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1591673223-1680-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 20 June 2020, 20:04:39 UTC
1566fee Linus Torvalds 20 June 2020, 19:31:08 UTC Merge tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - a few ptrace fixes mostly for strace and seccomp_bpf kernel tests findings - cleanup unused pm callbacks in virtio ccw - replace kmalloc + memset with kzalloc in crypto - use $(LD) for vDSO linkage to make clang happy - fix vDSO clock_getres() to preserve the same behaviour as posix_get_hrtimer_res() - fix workqueue cpumask warning when NUMA=n and nr_node_ids=2 - reduce SLSB writes during input processing, improve warnings and cleanup qdio_data usage in qdio - a few fixes to use scnprintf() instead of snprintf() * tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix syscall_get_error for compat processes s390/qdio: warn about unexpected SLSB states s390/qdio: clean up usage of qdio_data s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES s390/vdso: fix vDSO clock_getres() s390/vdso: Use $(LD) instead of $(CC) to link vDSO s390/protvirt: use scnprintf() instead of snprintf() s390: use scnprintf() in sys_##_prefix##_##_name##_show s390/crypto: use scnprintf() instead of snprintf() s390/zcrypt: use kzalloc s390/virtio: remove unused pm callbacks s390/qdio: reduce SLSB writes during Input Queue processing selftests/seccomp: s390 shares the syscall and return value register s390/ptrace: fix setting syscall number s390/ptrace: pass invalid syscall numbers to tracing s390/ptrace: return -ENOSYS when invalid syscall is supplied s390/seccomp: pass syscall arguments via seccomp_data s390/qdio: fine-tune SLSB update 20 June 2020, 19:31:08 UTC
7fdfbe0 Linus Torvalds 20 June 2020, 19:14:29 UTC Merge tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - a workaround for a compiler surprise related to the "r" inline assembly that allows LLVM to boot. - a fix to avoid WX-only mappings, which the ISA does not allow. While this probably manifests in many ways, the bug was found in stress-ng. - a missing lock in set_direct_map_*(), which due to a recent lockdep change started asserting. * tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Acquire mmap lock before invoking walk_page_range RISC-V: Don't allow write+exec only page mapping request in mmap riscv/atomic: Fix sign extension for RV64I 20 June 2020, 19:14:29 UTC
27c2760 Linus Torvalds 20 June 2020, 19:10:09 UTC Merge tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest cleanups from Shuah Khan: - ftrace "requires:" list for simplifying and unifying requirement checks for each test case, adding "requires:" line instead of checking required ftrace interfaces in each test case. - a minor spelling correction patch * tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Support ":README" suffix for requires selftests/ftrace: Support ":tracer" suffix for requires selftests/ftrace: Convert check_filter_file() with requires list selftests/ftrace: Convert required interface checks into requires list selftests/ftrace: Add "requires:" list support selftests/ftrace: Return unsupported for the unconfigured features selftests/ftrace: Allow ":" in description tools: testing: ftrace: trigger: fix spelling mistake 20 June 2020, 19:10:09 UTC
5481fc6 David Howells 19 June 2020, 22:39:36 UTC afs: Fix hang on rmmod due to outstanding timer The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 June 2020, 19:01:58 UTC
f8ea5c7 David Howells 18 June 2020, 23:01:28 UTC afs: Fix afs_do_lookup() to call correct fetch-status op variant Fix afs_do_lookup()'s fallback case for when FS.InlineBulkStatus isn't supported by the server. In the fallback, it calls FS.FetchStatus for the specific vnode it's meant to be looking up. Commit b6489a49f7b7 broke this by renaming one of the two identically-named afs_fetch_status_operation descriptors to something else so that one of them could be made non-static. The site that used the renamed one, however, wasn't renamed and didn't produce any warning because the other was declared in a header. Fix this by making afs_do_lookup() use the renamed variant. Note that there are two variants of the success method because one is called from ->lookup() where we may or may not have an inode, but can't call iget until after we've talked to the server - whereas the other is called from within iget where we have an inode, but it may or may not be initialised. The latter variant expects there to be an inode, but because it's being called from there former case, there might not be - resulting in an oops like the following: BUG: kernel NULL pointer dereference, address: 00000000000000b0 ... RIP: 0010:afs_fetch_status_success+0x27/0x7e ... Call Trace: afs_wait_for_operation+0xda/0x234 afs_do_lookup+0x2fe/0x3c1 afs_lookup+0x3c5/0x4bd __lookup_slow+0xcd/0x10f walk_component+0xa2/0x10c path_lookupat.isra.0+0x80/0x110 filename_lookup+0x81/0x104 vfs_statx+0x76/0x109 __do_sys_newlstat+0x39/0x6b do_syscall_64+0x4c/0x78 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: b6489a49f7b7 ("afs: Fix silly rename") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 June 2020, 19:01:58 UTC
c0e1c8c Christophe Leroy 15 June 2020, 12:57:59 UTC powerpc/8xx: Provide ptep_get() with 16k pages READ_ONCE() now enforces atomic read, which leads to: CC mm/gup.o In file included from ./include/linux/kernel.h:11:0, from mm/gup.c:2: In function 'gup_hugepte.constprop', inlined from 'gup_huge_pd.isra.79' at mm/gup.c:2465:8: ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_222' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE(). _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ ./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert' compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \ ^ ./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type' compiletime_assert_rwonce_type(x); \ ^ mm/gup.c:2428:8: note: in expansion of macro 'READ_ONCE' pte = READ_ONCE(*ptep); ^ In function 'gup_get_pte', inlined from 'gup_pte_range' at mm/gup.c:2228:9, inlined from 'gup_pmd_range' at mm/gup.c:2613:15, inlined from 'gup_pud_range' at mm/gup.c:2641:15, inlined from 'gup_p4d_range' at mm/gup.c:2666:15, inlined from 'gup_pgd_range' at mm/gup.c:2694:15, inlined from 'internal_get_user_pages_fast' at mm/gup.c:2795:3: ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_219' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE(). _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ ./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert' compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \ ^ ./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type' compiletime_assert_rwonce_type(x); \ ^ mm/gup.c:2199:9: note: in expansion of macro 'READ_ONCE' return READ_ONCE(*ptep); ^ make[2]: *** [mm/gup.o] Error 1 Define ptep_get() on 8xx when using 16k pages. Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/341688399c1b102756046d19ea6ce39db1ae4742.1592225558.git.christophe.leroy@csgroup.eu 20 June 2020, 12:14:54 UTC
481e980 Christophe Leroy 15 June 2020, 12:57:58 UTC mm: Allow arches to provide ptep_get() Since commit 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") it is not possible anymore to use READ_ONCE() to access complex page table entries like the one defined for powerpc 8xx with 16k size pages. Define a ptep_get() helper that architectures can override instead of performing a READ_ONCE() on the page table entry pointer. Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/087fa12b6e920e32315136b998aa834f99242695.1592225558.git.christophe.leroy@csgroup.eu 20 June 2020, 12:14:53 UTC
55ca226 Christophe Leroy 15 June 2020, 12:57:57 UTC mm/gup: Use huge_ptep_get() in gup_hugepte() gup_hugepte() reads hugepage table entries, it can't read them directly, huge_ptep_get() must be used. Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ffc3714334c3bfaca6f13788ad039e8759ae413f.1592225558.git.christophe.leroy@csgroup.eu 20 June 2020, 12:14:53 UTC
9df24ea Dan Williams 19 June 2020, 21:18:51 UTC Merge branch 'for-5.8/papr_scm' into libnvdimm-for-next Include the papr_scm health retrieval feature for v5.8-rc2. The functionality was initially posted well in advance of the merge window, but review comments and a late build-bot warning kept them out of the v5.8-rc1 libnvdimm pull request. Vaibhav notes: These patches are tied to specific features that were committed to customers in upcoming distros releases (RHEL and SLES) whose time-lines are tied to 5.8 kernel release. Being able to track the health of an nvdimm is critical for our customers that are running workloads leveraging papr-scm nvdimms. Missing the 5.8 kernel would mean missing the distro timelines and shifting forward the availability of this feature in distro kernels by at least 6 months. 19 June 2020, 21:18:51 UTC
4333a9b Linus Torvalds 19 June 2020, 20:16:58 UTC Merge tag 'io_uring-5.8-2020-06-19' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: - Catch a case where io_sq_thread() didn't do proper mm acquire - Ensure poll completions are reaped on shutdown - Async cancelation and run fixes (Pavel) - io-poll race fixes (Xiaoguang) - Request cleanup race fix (Xiaoguang) * tag 'io_uring-5.8-2020-06-19' of git://git.kernel.dk/linux-block: io_uring: fix possible race condition against REQ_F_NEED_CLEANUP io_uring: reap poll completions while waiting for refs to drop on exit io_uring: acquire 'mm' for task_work for SQPOLL io_uring: add memory barrier to synchronize io_kiocb's result and iopoll_completed io_uring: don't fail links for EAGAIN error in IOPOLL mode io_uring: cancel by ->task not pid io_uring: lazy get task io_uring: batch cancel in io_uring_cancel_files() io_uring: cancel all task's requests on exit io-wq: add an option to cancel all matched reqs io-wq: reorder cancellation pending -> running io_uring: fix lazy work init 19 June 2020, 20:16:58 UTC
d2b1c81 Linus Torvalds 19 June 2020, 20:11:26 UTC Merge tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Use import_uuid() where appropriate (Andy) - bcache fixes (Coly, Mauricio, Zhiqiang) - blktrace sparse warnings fix (Jan) - blktrace concurrent setup fix (Luis) - blkdev_get use-after-free fix (Jason) - Ensure all blk-mq maps are updated (Weiping) - Loop invalidate bdev fix (Zheng) * tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block: block: make function 'kill_bdev' static loop: replace kill_bdev with invalidate_bdev partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense block: update hctx map when use multiple maps blktrace: Avoid sparse warnings when assigning q->blk_trace blktrace: break out of blktrace setup on concurrent calls block: Fix use-after-free in blkdev_get() trace/events/block.h: drop kernel-doc for dropped function parameter blk-mq: Remove redundant 'return' statement bcache: pr_info() format clean up in bcache_device_init() bcache: use delayed kworker fo asynchronous devices registration bcache: check and adjust logical block size for backing devices bcache: fix potential deadlock problem in btree_gc_coalesce 19 June 2020, 20:11:26 UTC
592be75 Linus Torvalds 19 June 2020, 20:09:40 UTC Merge tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block Pull libata fixes from Jens Axboe: "A few minor changes that should go into this release" * tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block: libata: Use per port sync for detach ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function sata_rcar: handle pm_runtime_get_sync failure cases 19 June 2020, 20:09:40 UTC
62c91ea Linus Torvalds 19 June 2020, 19:40:57 UTC Merge tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Just i915 and amd here. i915 has some workaround movement so they get applied at the right times, and a timeslicing fix, along with some display fixes. AMD has a few display floating point fix and a devcgroup fix for amdkfd. i915: - Fix for timeslicing and virtual engines/unpremptable requests (+ 1 dependency patch) - Fixes into TypeC register programming and interrupt storm detecting - Disable DIP on MST ports with the transcoder clock still on - Avoid missing GT workarounds at reset for HSW and older gens - Fix for unwinding multiple requests missing force restore - Fix encoder type check for DDI vswing sequence - Build warning fixes amdgpu: - Fix kvfree/kfree mixup - Fix hawaii device id in powertune configuration - Display FP fixes - Documentation fixes amdkfd: - devcgroup check fix" * tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/amdgpu: fix documentation around busy_percentage drm/amdgpu/pm: update comment to clarify Overdrive interfaces drm/amdkfd: Use correct major in devcgroup check drm/i915/display: Fix the encoder type check drm/i915/icl+: Fix hotplug interrupt disabling after storm detection drm/i915/gt: Move gen4 GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move ilk GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move snb GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move vlv GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move ivb GT workarounds from init_clock_gating to workarounds drm/i915/gt: Move hsw GT workarounds from init_clock_gating to workarounds drm/i915/icl: Disable DIP on MST ports with the transcoder clock still on drm/i915/gt: Incrementally check for rewinding drm/i915/tc: fix the reset of ln0 drm/i915/gt: Prevent timeslicing into unpreemptable requests drm/i915/selftests: Restore to default heartbeat drm/i915: work around false-positive maybe-uninitialized warning drm/i915/pmu: avoid an maybe-uninitialized warning drm/i915/gt: Incorporate the virtual engine into timeslicing drm/amd/display: Rework dsc to isolate FPU operations ... 19 June 2020, 19:40:57 UTC
672f925 Linus Torvalds 19 June 2020, 19:25:04 UTC Merge tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "An important follow-up for replica reads support that went into -rc1 and two target_copy() fixups" * tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-client: libceph: don't omit used_replica in target_copy() libceph: don't omit recovery_deletes in target_copy() libceph: move away from global osd_req_flags 19 June 2020, 19:25:04 UTC
84bc199 Linus Torvalds 19 June 2020, 19:19:12 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Unfortunately, we still have a number of outstanding issues so there will be more fixes to come, but this lot are a good start. - Fix handling of watchpoints triggered by uaccess routines - Fix initialisation of gigantic pages for CMA buffers - Raise minimum clang version for BTI to avoid miscompilation - Fix data race in SVE vector length configuration code - Ensure address tags are ignored in kern_addr_valid() - Dump register state on fatal BTI exception - kexec_file() cleanup to use struct_size() macro" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints arm64: kexec_file: Use struct_size() in kmalloc() arm64: mm: reserve hugetlb CMA after numa_init arm64: bti: Require clang >= 10.0.1 for in-kernel BTI support arm64: sve: Fix build failure when ARM64_SVE=y and SYSCTL=n arm64: pgtable: Clear the GP bit for non-executable kernel pages arm64: mm: reset address tag set by kasan sw tagging arm64: traps: Dump registers prior to panic() in bad_mode() arm64/sve: Eliminate data races on sve_default_vl docs/arm64: Fix typo'd #define in sve.rst arm64: remove TEXT_OFFSET randomization 19 June 2020, 19:19:12 UTC
98b7699 Linus Torvalds 19 June 2020, 18:45:03 UTC Merge tag 'overflow-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull flex-array size helper from Kees Cook: "During the treewide clean-ups of zero-length "flexible arrays", the struct_size() helper was heavily used, but it was noticed that many times it would have been nice to have an additional helper to get the size of just the flexible array itself. This need appears to be even more common when cleaning up the 1-byte array "flexible arrays", so Gustavo implemented it. I'd love to get this landed early so it can be used during the v5.9 dev cycle to ease the 1-byte array cleanups." * tag 'overflow-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: overflow.h: Add flex_array_size() helper 19 June 2020, 18:45:03 UTC
98d7e74 Linus Torvalds 19 June 2020, 18:39:57 UTC Merge tag 'perf-tools-fixes-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Update various UAPI headers, some automatically adding support for a new MSR and the faccess2 syscall. - Fix corner case NULL deref in the histograms code. - Fix corner case NULL deref in 'perf stat' aggregation code. - Fix array pointer deref and old style declaration in the parsing of events. - Fix segfault when processing ZSTD compressed perf.data files in 'perf script' due to lack of initialization of the ZSTD library. - Handle __attribute__((user)) in libtraceevent fixing the parsing of syscall tracepoints with user buffers. - Make libtraevent aware of __builtin_expect() appearing in tracepoint fields. - Make the BPF prologue generation use bpf_probe_read_{user,kernel}(). - Fix the '@user' attribute parsing in kprobes variables in 'perf probe'. - Fix error message when asking for -fsanitize=address without required libraries. * tag 'perf-tools-fixes-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (22 commits) perf build: Fix error message when asking for -fsanitize=address without required libraries tools lib traceevent: Add handler for __builtin_expect() tools lib traceevent: Handle __attribute__((user)) in field names tools lib traceevent: Add append() function helper for appending strings tools headers UAPI: Sync linux/fs.h with the kernel sources tools include UAPI: Sync linux/vhost.h with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources perf script: Initialize zstd_data perf pmu: Remove unused declaration perf parse-events: Fix an old style declaration perf parse-events: Fix an incompatible pointer perf bpf: Fix bpf prologue generation perf probe: Fix user attribute access in kprobes perf stat: Fix NULL pointer dereference perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events() tools headers UAPI: Sync kvm.h headers with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/fscrypt.h with the kernel sources perf beauty: Add support to STATX_MNT_ID in the 'statx' syscall 'mask' argument tools headers uapi: Sync linux/stat.h with the kernel sources ... 19 June 2020, 18:39:57 UTC
28f9f8f Loic Poulain 19 June 2020, 10:17:44 UTC MAINTAINERS: Add robert and myself as qcom i2c cci maintainers Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> [wsa: kept sorting] Signed-off-by: Wolfram Sang <wsa@kernel.org> 19 June 2020, 13:07:00 UTC
a23ff37 Keyur Patel 12 June 2020, 21:26:35 UTC i2c: smbus: Fix spelling mistake in the comments Fix spelling mistake in the comments with help of `codespell`. seperate ==> separate Signed-off-by: Keyur Patel <iamkeyur96@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 19 June 2020, 08:09:16 UTC
a576512 Daniel Schaefer 14 June 2020, 18:23:55 UTC Documentation/i2c: SMBus start signal is S not A Just like all other I2C/SMBus commands, the start signal for the SMBus Quick Command is S, not A. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daniel Schaefer <git@danielschaefer.me> Signed-off-by: Wolfram Sang <wsa@kernel.org> 19 June 2020, 07:21:48 UTC
390fd04 Wolfram Sang 15 June 2020, 07:58:15 UTC i2c: remove deprecated i2c_new_device API All in-tree users have been converted to the new i2c_new_client_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 19 June 2020, 07:20:28 UTC
bc5a3e4 Wolfram Sang 15 June 2020, 07:58:14 UTC Documentation: media: convert to use i2c_new_client_device() Move away from the deprecated API and advertise the new one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> 19 June 2020, 07:20:25 UTC
9e1b93b Wolfram Sang 15 June 2020, 07:58:13 UTC video: backlight: tosa_lcd: convert to use i2c_new_client_device() Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> 19 June 2020, 07:20:25 UTC
f04a5ba Wolfram Sang 15 June 2020, 07:58:12 UTC x86/platform/intel-mid: convert to use i2c_new_client_device() Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 19 June 2020, 07:20:25 UTC
bb7d93f Wolfram Sang 15 June 2020, 07:58:11 UTC drm: encoder_slave: use new I2C API i2c_new_client() is deprecated, use the replacement i2c_new_client_device(). Also, we have a helper to check if a driver is bound. Use it to simplify the code. Note that this changes the errno for a failed device creation from ENOMEM to ENODEV. No callers currently interpret this errno, though, so we use this condensed error check. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@kernel.org> 19 June 2020, 07:20:21 UTC
f78d403 Wolfram Sang 15 June 2020, 07:58:10 UTC drm: encoder_slave: fix refcouting error for modules module_put() balances try_module_get(), not request_module(). Fix the error path to match that. Fixes: 2066facca4c7 ("drm/kms: slave encoder interface.") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@kernel.org> 19 June 2020, 07:20:15 UTC
0e2c090 Atish Patra 17 June 2020, 20:37:32 UTC RISC-V: Acquire mmap lock before invoking walk_page_range As per walk_page_range documentation, mmap lock should be acquired by the caller before invoking walk_page_range. mmap_assert_locked gets triggered without that. The details can be found here. http://lists.infradead.org/pipermail/linux-riscv/2020-June/010335.html Fixes: 395a21ff859c(riscv: add ARCH_HAS_SET_DIRECT_MAP support) Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Michel Lespinasse <walken@google.com> Reviewed-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 19 June 2020, 01:46:09 UTC
e0d17c8 Yash Shah 16 June 2020, 14:03:06 UTC RISC-V: Don't allow write+exec only page mapping request in mmap As per the table 4.4 of version "20190608-Priv-MSU-Ratified" of the RISC-V instruction set manual[0], the PTE permission bit combination of "write+exec only" is reserved for future use. Hence, don't allow such mapping request in mmap call. An issue is been reported by David Abdurachmanov, that while running stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V specific kernel. This issue arises when the stress-sysbadaddr request for pages with "write+exec only" permission bits and then passes the address obtain from this mmap call to various system call. For the riscv kernel, the mmap call should fail for this particular combination of permission bits since it's not valid. [0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-20190608-1.pdf Signed-off-by: Yash Shah <yash.shah@sifive.com> Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com> [Palmer: Refer to the latest ISA specification at the only link I could find, and update the terminology.] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 19 June 2020, 00:28:53 UTC
8a7a3d1 Dave Airlie 19 June 2020, 00:02:28 UTC Merge tag 'amd-drm-fixes-5.8-2020-06-17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.8-2020-06-17: amdgpu: - Fix kvfree/kfree mixup - Fix hawaii device id in powertune configuration - Display FP fixes - Documentation fixes amdkfd: - devcgroup check fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200617220733.3773183-1-alexander.deucher@amd.com 19 June 2020, 00:02:30 UTC
7ac98ff Dave Airlie 18 June 2020, 23:45:47 UTC Merge tag 'drm-intel-fixes-2020-06-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix for timeslicing and virtual engines/unpremptable requests (+ 1 dependency patch) - Fixes into TypeC register programming and interrupt storm detecting - Disable DIP on MST ports with the transcoder clock still on - Avoid missing GT workarounds at reset for HSW and older gens - Fix for unwinding multiple requests missing force restore - Fix encoder type check for DDI vswing sequence - Build warning fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200618124659.GA12342@jlahtine-desk.ger.corp.intel.com 18 June 2020, 23:45:47 UTC
5e857ce Linus Torvalds 18 June 2020, 19:35:51 UTC Merge branch 'hch' (maccess patches from Christoph Hellwig) Merge non-faulting memory access cleanups from Christoph Hellwig: "Andrew and I decided to drop the patches implementing your suggested rename of the probe_kernel_* and probe_user_* helpers from -mm as there were way to many conflicts. After -rc1 might be a good time for this as all the conflicts are resolved now" This also adds a type safety checking patch on top of the renaming series to make the subtle behavioral difference between 'get_user()' and 'get_kernel_nofault()' less potentially dangerous and surprising. * emailed patches from Christoph Hellwig <hch@lst.de>: maccess: make get_kernel_nofault() check for minimal type compatibility maccess: rename probe_kernel_address to get_kernel_nofault maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault 18 June 2020, 19:35:51 UTC
0c389d8 Linus Torvalds 18 June 2020, 19:10:37 UTC maccess: make get_kernel_nofault() check for minimal type compatibility Now that we've renamed probe_kernel_address() to get_kernel_nofault() and made it look and behave more in line with get_user(), some of the subtle type behavior differences end up being more obvious and possibly dangerous. When you do get_user(val, user_ptr); the type of the access comes from the "user_ptr" part, and the above basically acts as val = *user_ptr; by design (except, of course, for the fact that the actual dereference is done with a user access). Note how in the above case, the type of the end result comes from the pointer argument, and then the value is cast to the type of 'val' as part of the assignment. So the type of the pointer is ultimately the more important type both for the access itself. But 'get_kernel_nofault()' may now _look_ similar, but it behaves very differently. When you do get_kernel_nofault(val, kernel_ptr); it behaves like val = *(typeof(val) *)kernel_ptr; except, of course, for the fact that the actual dereference is done with exception handling so that a faulting access is suppressed and returned as the error code. But note how different the casting behavior of the two superficially similar accesses are: one does the actual access in the size of the type the pointer points to, while the other does the access in the size of the target, and ignores the pointer type entirely. Actually changing get_kernel_nofault() to act like get_user() is almost certainly the right thing to do eventually, but in the meantime this patch adds logit to at least verify that the pointer type is compatible with the type of the result. In many cases, this involves just casting the pointer to 'void *' to make it obvious that the type of the pointer is not the important part. It's not how 'get_user()' acts, but at least the behavioral difference is now obvious and explicit. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 June 2020, 19:10:37 UTC
25f12ae Christoph Hellwig 17 June 2020, 07:37:55 UTC maccess: rename probe_kernel_address to get_kernel_nofault Better describe what this helper does, and match the naming of copy_from_kernel_nofault. Also switch the argument order around, so that it acts and looks like get_user(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 June 2020, 18:14:40 UTC
670d0a4 Luc Van Oostenryck 17 June 2020, 22:02:26 UTC sparse: use identifiers to define address spaces Currently, address spaces in warnings are displayed as '<asn:X>' with 'X' being the address space's arbitrary number. But since sparse v0.6.0-rc1 (late December 2018), sparse allows you to define the address spaces using an identifier instead of a number. This identifier is then directly used in the warnings. So, use the identifiers '__user', '__iomem', '__percpu' & '__rcu' for the corresponding address spaces. The default address space, __kernel, being not displayed in warnings, stays defined as '0'. With this change, warnings that used to be displayed as: cast removes address space '<asn:1>' of expression ... void [noderef] <asn:2> * will now be displayed as: cast removes address space '__user' of expression ... void [noderef] __iomem * This also moves the __kernel annotation to be the first one, since it is quite different from the others because it's the default one, and so: - it's never displayed - it's normally not needed, nor in type annotations, nor in cast between address spaces. The only time it's needed is when it's combined with a typeof to express "the same type as this one but without the address space" - it can't be defined with a name, '0' must be used. So, it seemed strange to me to have it in the middle of the other ones. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 June 2020, 17:05:23 UTC
3373a34 Zheng Bin 18 June 2020, 04:21:38 UTC block: make function 'kill_bdev' static kill_bdev does not have any external user, so make it static. Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> 18 June 2020, 15:24:35 UTC
f4bd34b Zheng Bin 18 June 2020, 04:21:37 UTC loop: replace kill_bdev with invalidate_bdev When a filesystem is mounted on a loop device and on a loop ioctl LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting destroyed. kill_bdev truncate_inode_pages truncate_inode_pages_range do_invalidatepage block_invalidatepage discard_buffer -->clear BH_Mapped flag sb_bread __bread_gfp bh = __getblk_gfp -->discard_buffer clear BH_Mapped flag __bread_slow submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)) --> hit this BUG_ON Fixes: 5db470e229e2 ("loop: drop caches if offset or block_size are changed") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> 18 June 2020, 15:24:35 UTC
b529211 Kai-Heng Feng 03 June 2020, 07:48:19 UTC libata: Use per port sync for detach Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend. Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency. Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks. Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: John Garry <john.garry@huawei.com> BugLink: https://bugs.launchpad.net/bugs/1867983 Signed-off-by: Jens Axboe <axboe@kernel.dk> 18 June 2020, 15:21:40 UTC
bc163c2 Andy Shevchenko 22 April 2020, 13:03:17 UTC partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense There is a specific API to treat raw data as UUID, i.e. import_uuid(). Use it instead of uuid_copy() with explicit casting. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 18 June 2020, 15:17:54 UTC
6f2cc16 Xiaoguang Wang 18 June 2020, 07:01:56 UTC io_uring: fix possible race condition against REQ_F_NEED_CLEANUP In io_read() or io_write(), when io request is submitted successfully, it'll go through the below sequence: kfree(iovec); req->flags &= ~REQ_F_NEED_CLEANUP; return ret; But clearing REQ_F_NEED_CLEANUP might be unsafe. The io request may already have been completed, and then io_complete_rw_iopoll() and io_complete_rw() will be called, both of which will also modify req->flags if needed. This causes a race condition, with concurrent non-atomic modification of req->flags. To eliminate this race, in io_read() or io_write(), if io request is submitted successfully, we don't remove REQ_F_NEED_CLEANUP flag. If REQ_F_NEED_CLEANUP is set, we'll leave __io_req_aux_free() to the iovec cleanup work correspondingly. Cc: stable@vger.kernel.org Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 18 June 2020, 14:32:44 UTC
6a1515c Tiezhu Yang 18 June 2020, 02:06:01 UTC perf build: Fix error message when asking for -fsanitize=address without required libraries When build perf with ASan or UBSan, if libasan or libubsan can not find, the feature-glibc is 0 and there exists the following error log which is wrong, because we can find gnu/libc-version.h in /usr/include, glibc-devel is also installed. [yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' BUILD: Doing 'make -j4' parallel build HOSTCC fixdep.o HOSTLD fixdep-in.o LINK fixdep <stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target <stdin>:1:0: warning: -fsanitize=address not supported for this target Auto-detecting system features: ... dwarf: [ OFF ] ... dwarf_getlocations: [ OFF ] ... glibc: [ OFF ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libcap: [ OFF ] ... libelf: [ OFF ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... zlib: [ OFF ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ OFF ] ... libaio: [ OFF ] ... libzstd: [ OFF ] ... disassembler-four-args: [ OFF ] Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop. Makefile.perf:224: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 [yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h /usr/include/gnu/libc-version.h After install libasan and libubsan, the feature-glibc is 1 and the build process is success, so the cause is related with libasan or libubsan, we should check them and print an error log to reflect the reality. Committer testing: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ OFF ] ... dwarf_getlocations: [ OFF ] ... glibc: [ OFF ] ... gtk2: [ OFF ] ... libbfd: [ OFF ] ... libcap: [ OFF ] ... libelf: [ OFF ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... zlib: [ OFF ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ OFF ] ... libaio: [ OFF ] ... libzstd: [ OFF ] ... disassembler-four-args: [ OFF ] Makefile.config:401: *** No libasan found, please install libasan. Stop. make[1]: *** [Makefile.perf:231: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/acme/git/perf/tools/perf' $ $ $ sudo dnf install libasan <SNIP> Installed: libasan-9.3.1-2.fc31.x86_64 $ $ $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libbfd: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] <SNIP> CC /tmp/build/perf/util/pmu-flex.o FLEX /tmp/build/perf/util/expr-flex.c CC /tmp/build/perf/util/expr-bison.o CC /tmp/build/perf/util/expr.o CC /tmp/build/perf/util/expr-flex.o CC /tmp/build/perf/util/parse-events-flex.o CC /tmp/build/perf/util/parse-events.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> INSTALL python-scripts INSTALL perf_completion-script INSTALL perf-tip make: Leaving directory '/home/acme/git/perf/tools/perf' $ ldd ~/bin/perf | grep asan libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000) $ And if we rebuild without -fsanitize-address: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ make O=/tmp/build/perf -C tools/perf/ install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libbfd: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] GEN /tmp/build/perf/common-cmds.h CC /tmp/build/perf/exec-cmd.o <SNIP> INSTALL perf_completion-script INSTALL perf-tip make: Leaving directory '/home/acme/git/perf/tools/perf' $ ldd ~/bin/perf | grep asan $ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: tiezhu yang <yangtiezhu@loongson.cn> Cc: xuefeng li <lixuefeng@loongson.cn> Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 June 2020, 13:34:31 UTC
1b20d94 Steven Rostedt (VMware) 24 March 2020, 20:08:48 UTC tools lib traceevent: Add handler for __builtin_expect() In order to move pointer checks like IS_ERR_VALUE() out of the hotpath and into the reader path of a trace event, user space tools need to be able to parse that. IS_ERR_VALUE() is defined as: #define IS_ERR_VALUE() unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO) Which eventually turns into: __builtin_expect(!!((unsigned long)(void *)(x) >= (unsigned long)-4095), 0) Now the traceevent parser can handle most of that except for the __builtin_expect(), which needs to be added. Link: https://lore.kernel.org/linux-mm/20200320055823.27089-3-jaewon31.kim@samsung.com/ Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kees Kook <keescook@chromium.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-mm@kvack.org Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200324200956.821799393@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 June 2020, 13:22:54 UTC
74621d9 Steven Rostedt (VMware) 24 March 2020, 20:08:47 UTC tools lib traceevent: Handle __attribute__((user)) in field names Commit c61f13eaa1ee1 ("gcc-plugins: Add structleak for more stack initialization") added "__attribute__((user))" to the user when stackleak detector is enabled. This now appears in the field format of system call trace events for system calls that have user buffers. The "__attribute__((user))" breaks the parsing in libtraceevent. That needs to be handled. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jaewon Kim <jaewon31.kim@samsung.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kees Kook <keescook@chromium.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-mm@kvack.org Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200324200956.663647256@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 June 2020, 13:22:27 UTC
27d4d33 Steven Rostedt (VMware) 24 March 2020, 20:08:46 UTC tools lib traceevent: Add append() function helper for appending strings There's several locations that open code realloc and strcat() to append text to strings. Add an append() function that takes a delimiter and a string to append to another string. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jaewon Lim <jaewon31.kim@samsung.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kees Kook <keescook@chromium.org> Cc: linux-mm@kvack.org Cc: linux-trace-devel@vger.kernel.org Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: http://lore.kernel.org/lkml/20200324200956.515118403@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 June 2020, 13:17:17 UTC
24ebec2 Will Deacon 29 May 2020, 13:12:18 UTC arm64: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints Unprivileged memory accesses generated by the so-called "translated" instructions (e.g. STTR) at EL1 can cause EL0 watchpoints to fire unexpectedly if kernel debugging is enabled. In such cases, the hw_breakpoint logic will invoke the user overflow handler which will typically raise a SIGTRAP back to the current task. This is futile when returning back to the kernel because (a) the signal won't have been delivered and (b) userspace can't handle the thing anyway. Avoid invoking the user overflow handler for watchpoints triggered by kernel uaccess routines, and instead single-step over the faulting instruction as we would if no overflow handler had been installed. (Fixes tag identifies the introduction of unprivileged memory accesses, which exposed this latent bug in the hw_breakpoint code) Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Fixes: 57f4959bad0a ("arm64: kernel: Add support for User Access Override") Reported-by: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> 18 June 2020, 10:10:00 UTC
bf508ec Gustavo A. R. Silva 17 June 2020, 21:34:07 UTC arm64: kexec_file: Use struct_size() in kmalloc() Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200617213407.GA1385@embeddedor Signed-off-by: Will Deacon <will@kernel.org> 18 June 2020, 09:45:20 UTC
618e078 Barry Song 17 June 2020, 21:58:28 UTC arm64: mm: reserve hugetlb CMA after numa_init hugetlb_cma_reserve() is called at the wrong place. numa_init has not been done yet. so all reserved memory will be located at node0. Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200617215828.25296-1-song.bao.hua@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org> 18 June 2020, 09:39:15 UTC
fe35ec5 Weiping Zhang 17 June 2020, 06:18:37 UTC block: update hctx map when use multiple maps There is an issue when tune the number for read and write queues, if the total queue count was not changed. The hctx->type cannot be updated, since __blk_mq_update_nr_hw_queues will return directly if the total queue count has not been changed. Reproduce: dmesg | grep "default/read/poll" [ 2.607459] nvme nvme0: 48/0/0 default/read/poll queues cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c 48 default tune the write queues to 24: echo 24 > /sys/module/nvme/parameters/write_queues echo 1 > /sys/block/nvme0n1/device/reset_controller dmesg | grep "default/read/poll" [ 433.547235] nvme nvme0: 24/24/0 default/read/poll queues cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c 48 default The driver's hardware queue mapping is not same as block layer. Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 18 June 2020, 03:33:04 UTC
da9cebe Alex Deucher 15 June 2020, 20:36:49 UTC drm/amdgpu: fix documentation around busy_percentage Add rename the gpu busy percentage for consistency and add the mem busy percentage documentation. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 17 June 2020, 21:42:43 UTC
7386f5c Alex Deucher 15 June 2020, 18:29:55 UTC drm/amdgpu/pm: update comment to clarify Overdrive interfaces Vega10 and previous asics use one interface, vega20 and newer use another. Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 17 June 2020, 21:42:14 UTC
99c7b30 Lorenz Brun 11 June 2020, 20:11:21 UTC drm/amdkfd: Use correct major in devcgroup check The existing code used the major version number of the DRM driver instead of the device major number of the DRM subsystem for validating access for a devices cgroup. This meant that accesses allowed by the devices cgroup weren't permitted and certain accesses denied by the devices cgroup were permitted (if they matched the wrong major device number). Signed-off-by: Lorenz Brun <lorenz@brun.one> Fixes: 6b855f7b83d2f ("drm/amdkfd: Check against device cgroup") Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 17 June 2020, 21:41:22 UTC
8231b0b Tom Rix 17 June 2020, 12:40:28 UTC selinux: fix undefined return of cond_evaluate_expr clang static analysis reports an undefined return security/selinux/ss/conditional.c:79:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return s[0]; ^~~~~~~~~~~ static int cond_evaluate_expr( ... { u32 i; int s[COND_EXPR_MAXDEPTH]; for (i = 0; i < expr->len; i++) ... return s[0]; When expr->len is 0, the loop which sets s[0] never runs. So return -1 if the loop never runs. Cc: stable@vger.kernel.org Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> 17 June 2020, 21:36:40 UTC
026bb84 Kaitao Cheng 29 May 2020, 14:12:14 UTC ftrace: Fix maybe-uninitialized compiler warning During build compiler reports some 'false positive' warnings about variables {'seq_ops', 'filtered_pids', 'other_pids'} may be used uninitialized. This patch silences these warnings. Also delete some useless spaces Link: https://lkml.kernel.org/r/20200529141214.37648-1-pilgrimtao@gmail.com Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 17 June 2020, 21:13:18 UTC
543094e Vishal Verma 20 May 2020, 22:50:26 UTC nvdimm/region: always show the 'align' attribute It is possible that a platform that is capable of 'namespace labels' comes up without the labels properly initialized. In this case, the region's 'align' attribute is hidden. Howerver, once the user does initialize he labels, the 'align' attribute still stays hidden, which is unexpected. The sysfs_update_group() API is meant to address this, and could be called during region probe, but it has entanglements with the device 'lockdep_mutex'. Therefore, simply make the 'align' attribute always visible. It doesn't matter what it says for label-less namespaces, since it is not possible to change their allocation anyway. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20200520225026.29426-1-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 17 June 2020, 21:08:31 UTC
56952e9 Jens Axboe 17 June 2020, 21:00:04 UTC io_uring: reap poll completions while waiting for refs to drop on exit If we're doing polled IO and end up having requests being submitted async, then completions can come in while we're waiting for refs to drop. We need to reap these manually, as nobody else will be looking for them. Break the wait into 1/20th of a second time waits, and check for done poll completions if we time out. Otherwise we can have done poll completions sitting in ctx->poll_list, which needs us to reap them but we're just waiting for them. Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> 17 June 2020, 21:05:08 UTC
b3583fc Dmitry V. Levin 02 June 2020, 18:00:51 UTC s390: fix syscall_get_error for compat processes If both the tracer and the tracee are compat processes, and gprs[2] is assigned a value by __poke_user_compat, then the higher 32 bits of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and syscall_get_error() always returns 0. Fix the implementation by sign-extending the value for compat processes the same way as x86 implementation does. The bug was exposed to user space by commit 201766a20e30f ("ptrace: add PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite. This change fixes strace syscall tampering on s390. Link: https://lkml.kernel.org/r/20200602180051.GA2427@altlinux.org Fixes: 753c4dd6a2fa2 ("[S390] ptrace changes") Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: stable@vger.kernel.org # v2.6.28+ Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> 17 June 2020, 21:05:05 UTC
c920c54 Julian Wiedmann 02 June 2020, 12:26:36 UTC s390/qdio: warn about unexpected SLSB states The way we produce SBALs to the device (first update q->nr_buf_used, then update the SLSB) should ensure that we never see some of the SLSB states when scanning the queue for progress. So make some noise if we do, this implies a bug in our SBAL tracking. Also tweak the WARN msg to provide more information. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> 17 June 2020, 21:05:05 UTC
3d6c6f2 Julian Wiedmann 02 June 2020, 12:23:32 UTC s390/qdio: clean up usage of qdio_data This removes the last remaining accesses to ->qdio_data from internal code. Just pass the qdio_irq struct where needed instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> 17 June 2020, 21:05:05 UTC
9d8426a Jens Axboe 17 June 2020, 00:42:49 UTC io_uring: acquire 'mm' for task_work for SQPOLL If we're unlucky with timing, we could be running task_work after having dropped the memory context in the sq thread. Since dropping the context requires a runnable task state, we cannot reliably drop it as part of our check-for-work loop in io_sq_thread(). Instead, abstract out the mm acquire for the sq thread into a helper, and call it from the async task work handler. Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Jens Axboe <axboe@kernel.dk> 17 June 2020, 18:49:16 UTC
bbde017 Xiaoguang Wang 15 June 2020, 18:06:38 UTC io_uring: add memory barrier to synchronize io_kiocb's result and iopoll_completed In io_complete_rw_iopoll(), stores to io_kiocb's result and iopoll completed are two independent store operations, to ensure that once iopoll_completed is ture and then req->result must been perceived by the cpu executing io_do_iopoll(), proper memory barrier should be used. And in io_do_iopoll(), we check whether req->result is EAGAIN, if it is, we'll need to issue this io request using io-wq again. In order to just issue a single smp_rmb() on the completion side, move the re-submit work to io_iopoll_complete(). Cc: stable@vger.kernel.org Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> [axboe: don't set ->iopoll_completed for -EAGAIN retry] Signed-off-by: Jens Axboe <axboe@kernel.dk> 17 June 2020, 18:49:09 UTC
2d7d679 Xiaoguang Wang 15 June 2020, 18:06:37 UTC io_uring: don't fail links for EAGAIN error in IOPOLL mode In IOPOLL mode, for EAGAIN error, we'll try to submit io request again using io-wq, so don't fail rest of links if this io request has links. Cc: stable@vger.kernel.org Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 17 June 2020, 18:49:01 UTC
1b50440 Linus Torvalds 17 June 2020, 18:29:37 UTC Merge tag 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: "Fixes for the SEV atomic pool (Geert Uytterhoeven and David Rientjes)" * tag 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mapping: dma-pool: decouple DMA_REMAP from DMA_COHERENT_POOL dma-pool: fix too large DMA pools on medium memory size systems 17 June 2020, 18:29:37 UTC
c0ee37e Christoph Hellwig 17 June 2020, 07:37:54 UTC maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 June 2020, 17:57:41 UTC
fe55731 Christoph Hellwig 17 June 2020, 07:37:53 UTC maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 June 2020, 17:57:41 UTC
0e093c7 Arnaldo Carvalho de Melo 17 June 2020, 13:23:51 UTC tools headers UAPI: Sync linux/fs.h with the kernel sources To pick the changes from: b383a73f2b83 ("fs/ext4: Introduce DAX inode flag") And silence this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h It causes various beautifiers for things like fspick, fsmount, etc (see below) to get rebuilt, but this specific change doesn't make 'perf trace' be capable of decoding anything new, as we still don't decode what comes from ioctls, just its cmds. Details about the update: $ cp include/uapi/linux/fs.h tools/include/uapi/linux/fs.h $ git diff diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h index 379a612f8f1d..f44eb0a04afd 100644 --- a/tools/include/uapi/linux/fs.h +++ b/tools/include/uapi/linux/fs.h @@ -262,6 +262,7 @@ struct fsxattr { #define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */ #define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */ #define FS_NOCOW_FL 0x00800000 /* Do not cow file */ +#define FS_DAX_FL 0x02000000 /* Inode is DAX */ #define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */ #define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */ #define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */ $ m make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build INSTALL GTK UI CC /tmp/build/perf/builtin-trace.o DESCEND plugins CC /tmp/build/perf/trace/beauty/fsmount.o CC /tmp/build/perf/trace/beauty/fspick.o CC /tmp/build/perf/trace/beauty/mount_flags.o CC /tmp/build/perf/trace/beauty/move_mount.o CC /tmp/build/perf/trace/beauty/renameat.o CC /tmp/build/perf/trace/beauty/sync_file_range.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 17 June 2020, 16:23:02 UTC
f64925c Arnaldo Carvalho de Melo 17 June 2020, 13:16:53 UTC tools include UAPI: Sync linux/vhost.h with the kernel sources To get the changes in: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks the new ioctl introduced in the above patch, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: # perf trace -e ioctl --pid 7951 <SNIP> 0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0 370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0 371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0 <SNIP> # Details about the update: $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h --- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300 +++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300 @@ -15,6 +15,8 @@ #include <linux/types.h> #include <linux/ioctl.h> +#define VHOST_FILE_UNBIND -1 + /* ioctls */ #define VHOST_VIRTIO 0xAF @@ -140,4 +142,6 @@ /* Get the max ring size. */ #define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16) +/* Set event fd for config interrupt*/ +#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int) #endif $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-06-17 10:15:35.123275966 -0300 +++ after 2020-06-17 10:15:51.812482117 -0300 @@ -27,6 +27,7 @@ [0x72] = "VDPA_SET_STATUS", [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", + [0x77] = "VDPA_SET_CONFIG_CALL", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", $ This causes these parts to get rebuilt: CC /tmp/build/perf/trace/beauty/ioctl.o INSTALL trace_plugins LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 17 June 2020, 16:22:41 UTC
25ca7e5 Arnaldo Carvalho de Melo 17 June 2020, 13:07:59 UTC tools arch x86: Sync the msr-index.h copy with the kernel sources To pick up the changes in: 7e5b3c267d25 ("x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation") Addressing these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h With this one will be able to use these new AMD MSRs in filters, by name, e.g.: # perf trace -e msr:* --filter "msr==IA32_MCU_OPT_CTRL" ^C# Using -v we can see how it sets up the tracepoint filters, converting from the string in the filter to the numeric value: # perf trace -v -e msr:* --filter "msr==IA32_MCU_OPT_CTRL" Using CPUID GenuineIntel-6-8E-A 0x123 New filter for msr:read_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344) 0x123 New filter for msr:write_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344) 0x123 New filter for msr:rdpmc: (msr==0x123) && (common_pid != 335 && common_pid != 30344) mmap size 528384B ^C# The updating process shows how this affects tooling in more detail: $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h --- tools/arch/x86/include/asm/msr-index.h 2020-06-03 10:36:09.959910238 -0300 +++ arch/x86/include/asm/msr-index.h 2020-06-17 10:04:20.235052901 -0300 @@ -128,6 +128,10 @@ #define TSX_CTRL_RTM_DISABLE BIT(0) /* Disable RTM feature */ #define TSX_CTRL_CPUID_CLEAR BIT(1) /* Disable TSX enumeration */ +/* SRBDS support */ +#define MSR_IA32_MCU_OPT_CTRL 0x00000123 +#define RNGDS_MITG_DIS BIT(0) + #define MSR_IA32_SYSENTER_CS 0x00000174 #define MSR_IA32_SYSENTER_ESP 0x00000175 #define MSR_IA32_SYSENTER_EIP 0x00000176 $ set -o vi $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-06-17 10:05:49.653114752 -0300 +++ after 2020-06-17 10:06:01.777258731 -0300 @@ -51,6 +51,7 @@ [0x0000011e] = "IA32_BBL_CR_CTL3", [0x00000120] = "IDT_MCR_CTRL", [0x00000122] = "IA32_TSX_CTRL", + [0x00000123] = "IA32_MCU_OPT_CTRL", [0x00000140] = "MISC_FEATURES_ENABLES", [0x00000174] = "IA32_SYSENTER_CS", [0x00000175] = "IA32_SYSENTER_ESP", $ The related change to cpu-features.h affects this: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o This shouldn't be affecting that 'perf bench' entry: $ find tools/perf/ -type f | xargs grep SRBDS $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Gross <mgross@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 17 June 2020, 16:21:26 UTC
08a7c77 Arnaldo Carvalho de Melo 17 June 2020, 16:20:14 UTC Merge remote-tracking branch 'torvalds/master' into perf/urgent To get some newer headers that got out of sync with the copies in tools/ so that we can try to have the tools/perf/ build clean for v5.8 with fewer pull requests. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 17 June 2020, 16:20:14 UTC
b13b04d Milian Wolff 12 June 2020, 23:03:33 UTC perf script: Initialize zstd_data Fixes segmentation fault when trying to interpret zstd-compressed data with perf script: ``` $ perf record -z ls ... [ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ] $ memcheck perf script ... ==67911== Invalid read of size 4 ==67911== at 0x5568188: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.5) ==67911== by 0x6E726B: zstd_decompress_stream (zstd.c:100) ==67911== by 0x65729C: perf_session__process_compressed_event (session.c:72) ==67911== by 0x6598E8: perf_session__process_user_event (session.c:1583) ==67911== by 0x65BA59: reader__process_events (session.c:2177) ==67911== by 0x65BA59: __perf_session__process_events (session.c:2234) ==67911== by 0x65BA59: perf_session__process_events (session.c:2267) ==67911== by 0x5A7397: __cmd_script (builtin-script.c:2447) ==67911== by 0x5A7397: cmd_script (builtin-script.c:3840) ==67911== by 0x5FE9D2: run_builtin (perf.c:312) ==67911== by 0x711627: handle_internal_command (perf.c:364) ==67911== by 0x711627: run_argv (perf.c:408) ==67911== by 0x711627: main (perf.c:538) ==67911== Address 0x71d8 is not stack'd, malloc'd or (recently) free'd ``` Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> LPU-Reference: 20200612230333.72140-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 17 June 2020, 16:19:37 UTC
c3dbe54 Jan Kara 05 June 2020, 14:58:37 UTC blktrace: Avoid sparse warnings when assigning q->blk_trace Mostly for historical reasons, q->blk_trace is assigned through xchg() and cmpxchg() atomic operations. Although this is correct, sparse complains about this because it violates rcu annotations since commit c780e86dd48e ("blktrace: Protect q->blk_trace with RCU") which started to use rcu for accessing q->blk_trace. Furthermore there's no real need for atomic operations anymore since all changes to q->blk_trace happen under q->blk_trace_mutex and since it also makes more sense to check if q->blk_trace is set with the mutex held earlier. So let's just replace xchg() with rcu_replace_pointer() and cmpxchg() with explicit check and rcu_assign_pointer(). This makes the code more efficient and sparse happy. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> 17 June 2020, 15:07:11 UTC
1b0b283 Luis Chamberlain 05 June 2020, 14:58:36 UTC blktrace: break out of blktrace setup on concurrent calls We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktrace Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 17 June 2020, 15:07:11 UTC
1497eea Michael Ellerman 16 June 2020, 13:56:16 UTC powerpc/syscalls: Use the number when building SPU syscall table Currently the macro that inserts entries into the SPU syscall table doesn't actually use the "nr" (syscall number) parameter. This does work, but it relies on the exact right number of syscall entries being emitted in order for the syscal numbers to line up with the array entries. If for example we had two entries with the same syscall number we wouldn't get an error, it would just cause all subsequent syscalls to be off by one in the spu_syscall_table. So instead change the macro to assign to the specific entry of the array, meaning any numbering overlap will be caught by the compiler. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200616135617.2937252-1-mpe@ellerman.id.au 17 June 2020, 13:20:03 UTC
687993c Mike Rapoport 15 June 2020, 09:22:29 UTC powerpc/8xx: use pmd_off() to access a PMD entry in pte_update() The pte_update() implementation for PPC_8xx unfolds page table from the PGD level to access a PMD entry. Since 8xx has only 2-level page table this can be simplified with pmd_off() shortcut. Replace explicit unfolding with pmd_off() and drop defines of pgd_index() and pgd_offset() that are no longer needed. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200615092229.23142-1-rppt@kernel.org 17 June 2020, 13:04:13 UTC
b9249cb Will Deacon 16 June 2020, 18:03:49 UTC arm64: bti: Require clang >= 10.0.1 for in-kernel BTI support Unfortunately, most versions of clang that support BTI are capable of miscompiling the kernel when converting a switch statement into a jump table. As an example, attempting to spawn a KVM guest results in a panic: [ 56.253312] Kernel panic - not syncing: bad mode [ 56.253834] CPU: 0 PID: 279 Comm: lkvm Not tainted 5.8.0-rc1 #2 [ 56.254225] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 [ 56.254712] Call trace: [ 56.254952] dump_backtrace+0x0/0x1d4 [ 56.255305] show_stack+0x1c/0x28 [ 56.255647] dump_stack+0xc4/0x128 [ 56.255905] panic+0x16c/0x35c [ 56.256146] bad_el0_sync+0x0/0x58 [ 56.256403] el1_sync_handler+0xb4/0xe0 [ 56.256674] el1_sync+0x7c/0x100 [ 56.256928] kvm_vm_ioctl_check_extension_generic+0x74/0x98 [ 56.257286] __arm64_sys_ioctl+0x94/0xcc [ 56.257569] el0_svc_common+0x9c/0x150 [ 56.257836] do_el0_svc+0x84/0x90 [ 56.258083] el0_sync_handler+0xf8/0x298 [ 56.258361] el0_sync+0x158/0x180 This is because the switch in kvm_vm_ioctl_check_extension_generic() is executed as an indirect branch to tail-call through a jump table: ffff800010032dc8: 3869694c ldrb w12, [x10, x9] ffff800010032dcc: 8b0c096b add x11, x11, x12, lsl #2 ffff800010032dd0: d61f0160 br x11 However, where the target case uses the stack, the landing pad is elided due to the presence of a paciasp instruction: ffff800010032e14: d503233f paciasp ffff800010032e18: a9bf7bfd stp x29, x30, [sp, #-16]! ffff800010032e1c: 910003fd mov x29, sp ffff800010032e20: aa0803e0 mov x0, x8 ffff800010032e24: 940017c0 bl ffff800010038d24 <kvm_vm_ioctl_check_extension> ffff800010032e28: 93407c00 sxtw x0, w0 ffff800010032e2c: a8c17bfd ldp x29, x30, [sp], #16 ffff800010032e30: d50323bf autiasp ffff800010032e34: d65f03c0 ret Unfortunately, this results in a fatal exception because paciasp is compatible only with branch-and-link (call) instructions and not simple indirect branches. A fix is being merged into Clang 10.0.1 so that a 'bti j' instruction is emitted as an explicit landing pad in this situation. Make in-kernel BTI depend on that compiler version when building with clang. Cc: Tom Stellard <tstellar@redhat.com> Cc: Daniel Kiss <daniel.kiss@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20200615105524.GA2694@willie-the-truck Link: https://lore.kernel.org/r/20200616183630.2445-1-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org> 17 June 2020, 10:18:58 UTC
b19d57d Gustavo A. R. Silva 09 June 2020, 01:22:33 UTC overflow.h: Add flex_array_size() helper Add flex_array_size() helper for the calculation of the size, in bytes, of a flexible array member contained within an enclosing structure. Example of usage: struct something { size_t count; struct foo items[]; }; struct something *instance; instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL); instance->count = count; memcpy(instance->items, src, flex_array_size(instance, items, instance->count)); The helper returns SIZE_MAX on overflow instead of wrapping around. Additionally replaces parameter "n" with "count" in struct_size() helper for greater clarity and unification. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200609012233.GA3371@embeddedor Signed-off-by: Kees Cook <keescook@chromium.org> 17 June 2020, 03:45:08 UTC
0f50d21 Masanari Iida 16 June 2020, 12:51:32 UTC scripts: Fix typo in headers_install.sh This patch fixes a spelling typo in scripts/headers_install.sh Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 17 June 2020, 01:44:55 UTC
4d0831e Masahiro Yamada 14 June 2020, 14:43:41 UTC kconfig: unify cc-option and as-option cc-option and as-option are almost the same; both pass the flag to $(CC). The main difference is the cc-option stops before the assemble stage (-S option) whereas as-option stops after (-c option). I chose -S because it is slightly faster, but $(cc-option,-gz=zlib) returns a wrong result (https://lkml.org/lkml/2020/6/9/1529). It has been fixed by commit 7b16994437c7 ("Makefile: Improve compressed debug info support detection"), but the assembler should always be invoked for more reliable compiler option tests. However, you cannot simply replace -S with -c because the following code in lib/Kconfig.debug would break: depends on $(cc-option,-gsplit-dwarf) The combination of -c and -gsplit-dwarf does not accept /dev/null as output. $ cat /dev/null | gcc -gsplit-dwarf -S -x c - -o /dev/null $ echo $? 0 $ cat /dev/null | gcc -gsplit-dwarf -c -x c - -o /dev/null objcopy: Warning: '/dev/null' is not an ordinary file $ echo $? 1 $ cat /dev/null | gcc -gsplit-dwarf -c -x c - -o tmp.o $ echo $? 0 There is another flag that creates an separate file based on the object file path: $ cat /dev/null | gcc -ftest-coverage -c -x c - -o /dev/null <stdin>:1: error: cannot open /dev/null.gcno So, we cannot use /dev/null to sink the output. Align the cc-option implementation with scripts/Kbuild.include. With -c option used in cc-option, as-option is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Will Deacon <will@kernel.org> 17 June 2020, 01:38:42 UTC
5414251 Masami Hiramatsu 16 June 2020, 10:14:34 UTC tools/bootconfig: Add testcase for show-command and quotes test Add testcases for the return value of the command to show bootconfig in initrd, and double/single quotes selecting. Link: http://lkml.kernel.org/r/159230247428.65555.2109472942519215104.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 17 June 2020, 01:21:03 UTC
f91cb5b Masami Hiramatsu 16 June 2020, 10:14:25 UTC tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig Fix bootconfig to return 0 if succeeded to show the bootconfig in initrd. Without this fix, "bootconfig INITRD" command returns !0 even if the command succeeded to show the bootconfig. Link: http://lkml.kernel.org/r/159230246566.65555.11891772258543514487.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 950313ebf79c ("tools: bootconfig: Add bootconfig command") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 17 June 2020, 01:21:03 UTC
272da32 Masami Hiramatsu 16 June 2020, 10:14:17 UTC tools/bootconfig: Fix to use correct quotes for value Fix bootconfig tool to select double or single quotes correctly according to the value. If a bootconfig value includes a double quote character, we must use single-quotes to quote that value. Link: http://lkml.kernel.org/r/159230245697.65555.12444299015852932304.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 950313ebf79c ("tools: bootconfig: Add bootconfig command") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 17 June 2020, 01:21:03 UTC
4e264ff Masami Hiramatsu 16 June 2020, 10:14:08 UTC proc/bootconfig: Fix to use correct quotes for value Fix /proc/bootconfig to select double or single quotes corrctly according to the value. If a bootconfig value includes a double quote character, we must use single-quotes to quote that value. This modifies if() condition and blocks for avoiding double-quote in value check in 2 places. Anyway, since xbc_array_for_each_value() can handle the array which has a single node correctly. Thus, if (vnode && xbc_node_is_array(vnode)) { xbc_array_for_each_value(vnode) /* vnode->next != NULL */ ... } else { snprintf(val); /* val is an empty string if !vnode */ } is equivalent to if (vnode) { xbc_array_for_each_value(vnode) /* vnode->next can be NULL */ ... } else { snprintf(""); /* value is always empty */ } Link: http://lkml.kernel.org/r/159230244786.65555.3763894451251622488.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: c1a3c36017d4 ("proc: bootconfig: Add /proc/bootconfig to show boot config list") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 17 June 2020, 01:21:03 UTC
6924372 YangHui 16 June 2020, 03:36:46 UTC tracing: Remove unused event variable in tracing_iter_reset We do not use the event variable, just remove it. Signed-off-by: YangHui <yanghui.def@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 17 June 2020, 01:21:03 UTC
3aa8fdc Vamshi K Sthambamkadi 15 June 2020, 14:30:38 UTC tracing/probe: Fix memleak in fetch_op_data operations kmemleak report: [<57dcc2ca>] __kmalloc_track_caller+0x139/0x2b0 [<f1c45d0f>] kstrndup+0x37/0x80 [<f9761eb0>] parse_probe_arg.isra.7+0x3cc/0x630 [<055bf2ba>] traceprobe_parse_probe_arg+0x2f5/0x810 [<655a7766>] trace_kprobe_create+0x2ca/0x950 [<4fc6a02a>] create_or_delete_trace_kprobe+0xf/0x30 [<6d1c8a52>] trace_run_command+0x67/0x80 [<be812cc0>] trace_parse_run_command+0xa7/0x140 [<aecfe401>] probes_write+0x10/0x20 [<2027641c>] __vfs_write+0x30/0x1e0 [<6a4aeee1>] vfs_write+0x96/0x1b0 [<3517fb7d>] ksys_write+0x53/0xc0 [<dad91db7>] __ia32_sys_write+0x15/0x20 [<da347f64>] do_syscall_32_irqs_on+0x3d/0x260 [<fd0b7e7d>] do_fast_syscall_32+0x39/0xb0 [<ea5ae810>] entry_SYSENTER_32+0xaf/0x102 Post parse_probe_arg(), the FETCH_OP_DATA operation type is overwritten to FETCH_OP_ST_STRING, as a result memory is never freed since traceprobe_free_probe_arg() iterates only over SYMBOL and DATA op types Setup fetch string operation correctly after fetch_op_data operation. Link: https://lkml.kernel.org/r/20200615143034.GA1734@cosmos Cc: stable@vger.kernel.org Fixes: a42e3c4de964 ("tracing/probe: Add immediate string parameter support") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 17 June 2020, 01:21:02 UTC
48a42f5 Wei Yang 10 June 2020, 03:32:51 UTC trace: Fix typo in allocate_ftrace_ops()'s comment No functional change, just correct the word. Link: https://lkml.kernel.org/r/20200610033251.31713-1-richard.weiyang@linux.alibaba.com Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 17 June 2020, 01:21:02 UTC
4649079 Steven Rostedt (VMware) 10 June 2020, 02:00:41 UTC tracing: Make ftrace packed events have align of 1 When using trace-cmd on 5.6-rt for the function graph tracer, the output was corrupted. It gave output like this: funcgraph_entry: func=0xffffffff depth=38982 funcgraph_entry: func=0x1ffffffff depth=16044 funcgraph_exit: func=0xffffffff overrun=0x92539aaf00000000 calltime=0x92539c9900000072 rettime=0x100000072 depth=11084 funcgraph_exit: func=0xffffffff overrun=0x9253946e00000000 calltime=0x92539e2100000072 rettime=0x72 depth=26033702 funcgraph_entry: func=0xffffffff depth=85798 funcgraph_entry: func=0x1ffffffff depth=12044 The reason was because the tracefs/events/ftrace/funcgraph_entry/exit format file was incorrect. The -rt kernel adds more common fields to the trace events. Namely, common_migrate_disable and common_preempt_lazy_count. Each is one byte in size. This changes the alignment of the normal payload. Most events are aligned normally, but the function and function graph events are defined with a "PACKED" macro, that packs their payload. As the offsets displayed in the format files are now calculated by an aligned field, the aligned field for function and function graph events should be 1, not their normal alignment. With aligning of the funcgraph_entry event, the format file has: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:unsigned char common_migrate_disable; offset:8; size:1; signed:0; field:unsigned char common_preempt_lazy_count; offset:9; size:1; signed:0; field:unsigned long func; offset:16; size:8; signed:0; field:int depth; offset:24; size:4; signed:1; But the actual alignment is: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:unsigned char common_migrate_disable; offset:8; size:1; signed:0; field:unsigned char common_preempt_lazy_count; offset:9; size:1; signed:0; field:unsigned long func; offset:12; size:8; signed:0; field:int depth; offset:20; size:4; signed:1; Link: https://lkml.kernel.org/r/20200609220041.2a3b527f@oasis.local.home Cc: stable@vger.kernel.org Fixes: 04ae87a52074e ("ftrace: Rework event_create_dir()") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 17 June 2020, 01:21:02 UTC
9fbc01c Kefeng Wang 09 June 2020, 13:52:00 UTC sample-trace-array: Remove trace_array 'sample-instance' Remove trace_array 'sample-instance' if kthread_run fails in sample_trace_array_init(). Link: https://lkml.kernel.org/r/20200609135200.2206726-1-wangkefeng.wang@huawei.com Cc: stable@vger.kernel.org Fixes: 89ed42495ef4a ("tracing: Sample module to demonstrate kernel access to Ftrace instances.") Reviewed-by: Divya Indi <divya.indi@oracle.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 17 June 2020, 01:21:02 UTC
back to top