Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
f75aef3 Linus Torvalds 30 August 2020, 23:01:54 UTC Linux 5.9-rc3 30 August 2020, 23:01:54 UTC
e43327c Linus Torvalds 30 August 2020, 22:53:44 UTC Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - fix regression in af_alg that affects iwd - restore polling delay in qat - fix double free in ingenic on error path - fix potential build failure in sa2ul due to missing Kconfig dependency * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: af_alg - Work around empty control messages without MSG_MORE crypto: sa2ul - add Kconfig selects to fix build error crypto: ingenic - Drop kfree for memory allocated with devm_kzalloc crypto: qat - add delay before polling mailbox 30 August 2020, 22:53:44 UTC
dcc5c6f Linus Torvalds 30 August 2020, 19:01:23 UTC Merge tag 'x86-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Three interrupt related fixes for X86: - Move disabling of the local APIC after invoking fixup_irqs() to ensure that interrupts which are incoming are noted in the IRR and not ignored. - Unbreak affinity setting. The rework of the entry code reused the regular exception entry code for device interrupts. The vector number is pushed into the errorcode slot on the stack which is then lifted into an argument and set to -1 because that's regs->orig_ax which is used in quite some places to check whether the entry came from a syscall. But it was overlooked that orig_ax is used in the affinity cleanup code to validate whether the interrupt has arrived on the new target. It turned out that this vector check is pointless because interrupts are never moved from one vector to another on the same CPU. That check is a historical leftover from the time where x86 supported multi-CPU affinities, but not longer needed with the now strict single CPU affinity. Famous last words ... - Add a missing check for an empty cpumask into the matrix allocator. The affinity change added a warning to catch the case where an interrupt is moved on the same CPU to a different vector. This triggers because a condition with an empty cpumask returns an assignment from the allocator as the allocator uses for_each_cpu() without checking the cpumask for being empty. The historical inconsistent for_each_cpu() behaviour of ignoring the cpumask and unconditionally claiming that CPU0 is in the mask struck again. Sigh. plus a new entry into the MAINTAINER file for the HPE/UV platform" * tag 'x86-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/matrix: Deal with the sillyness of for_each_cpu() on UP x86/irq: Unbreak interrupt affinity setting x86/hotplug: Silence APIC only after all interrupts are migrated MAINTAINERS: Add entry for HPE Superdome Flex (UV) maintainers 30 August 2020, 19:01:23 UTC
d2283cd Linus Torvalds 30 August 2020, 18:56:54 UTC Merge tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Revert the platform driver conversion of interrupt chip drivers as it turned out to create more problems than it solves. - Fix a trivial typo in the new module helpers which made probing reliably fail. - Small fixes in the STM32 and MIPS Ingenic drivers - The TI firmware rework which had badly managed dependencies and had to wait post rc1" * tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ingenic: Leave parent IRQ unmasked on suspend irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers arm64: dts: k3-am65: Update the RM resource types arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent. irqchip/ti-sci-intr: Add support for INTR being a parent to INTR dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent firmware: ti_sci: Add support for getting resource with subtype firmware: ti_sci: Drop unused structure ti_sci_rm_type_map firmware: ti_sci: Drop the device id to resource type translation 30 August 2020, 18:56:54 UTC
0063a82 Linus Torvalds 30 August 2020, 18:50:53 UTC Merge tag 'sched-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single fix for the scheduler: - Make is_idle_task() __always_inline to prevent the compiler from putting it out of line into the wrong section because it's used inside noinstr sections" * tag 'sched-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Use __always_inline on is_idle_task() 30 August 2020, 18:50:53 UTC
b69bea8 Linus Torvalds 30 August 2020, 18:43:50 UTC Merge tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A set of fixes for lockdep, tracing and RCU: - Prevent recursion by using raw_cpu_* operations - Fixup the interrupt state in the cpu idle code to be consistent - Push rcu_idle_enter/exit() invocations deeper into the idle path so that the lock operations are inside the RCU watching sections - Move trace_cpu_idle() into generic code so it's called before RCU goes idle. - Handle raw_local_irq* vs. local_irq* operations correctly - Move the tracepoints out from under the lockdep recursion handling which turned out to be fragile and inconsistent" * tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep,trace: Expose tracepoints lockdep: Only trace IRQ edges mips: Implement arch_irqs_disabled() arm64: Implement arch_irqs_disabled() nds32: Implement arch_irqs_disabled() locking/lockdep: Cleanup x86/entry: Remove unused THUNKs cpuidle: Move trace_cpu_idle() into generic code cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic sched,idle,rcu: Push rcu_idle deeper into the idle path cpuidle: Fixup IRQ state lockdep: Use raw_cpu_*() for per-cpu variables 30 August 2020, 18:43:50 UTC
3edd8db Linus Torvalds 30 August 2020, 18:38:21 UTC Merge tag '5.9-rc2-smb-fix' of git://git.samba.org/sfrench/cifs-2.6 Pull cfis fix from Steve French: "DFS fix for referral problem when using SMB1" * tag '5.9-rc2-smb-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix check of tcon dfs in smb1 30 August 2020, 18:38:21 UTC
8bb5021 Linus Torvalds 30 August 2020, 17:56:12 UTC Merge tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Revert our removal of PROT_SAO, at least one user expressed an interest in using it on Power9. Instead don't allow it to be used in guests unless enabled explicitly at compile time. - A fix for a crash introduced by a recent change to FP handling. - Revert a change to our idle code that left Power10 with no idle support. - One minor fix for the new scv system call path to set PPR. - Fix a crash in our "generic" PMU if branch stack events were enabled. - A fix for the IMC PMU, to correctly identify host kernel samples. - The ADB_PMU powermac code was found to be incompatible with VMAP_STACK, so make them incompatible in Kconfig until the code can be fixed. - A build fix in drivers/video/fbdev/controlfb.c, and a documentation fix. Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy, Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin, Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan Srinivasan. * tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check" powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc powerpc/perf: Fix crashes with generic_compat_pmu & BHRB powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode powerpc/64s: scv entry should set PPR Documentation/powerpc: fix malformed table in syscall64-abi video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n selftests/powerpc: Update PROT_SAO test to skip ISA 3.1 powerpc/64s: Disallow PROT_SAO in LPARs by default Revert "powerpc/64s: Remove PROT_SAO support" 30 August 2020, 17:56:12 UTC
6f0306d Linus Torvalds 30 August 2020, 17:51:03 UTC Merge tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Let's try this again... Here are some USB fixes for 5.9-rc3. This differs from the previous pull request for this release in that the usb gadget patch now does not break some systems, and actually does what it was intended to do. Many thanks to Marek Szyprowski for quickly noticing and testing the patch from Andy Shevchenko to resolve this issue. Additionally, some more new USB quirks have been added to get some new devices to work properly based on user reports. Other than that, the patches are all here, and they contain: - usb gadget driver fixes - xhci driver fixes - typec fixes - new quirks and ids - fixes for USB patches that went into 5.9-rc1. All of these have been tested in linux-next with no reported issues" * tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: storage: Add unusual_uas entry for Sony PSZ drives USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe() USB: gadget: u_f: Unbreak offset calculation in VLAs USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D usb: typec: tcpm: Fix Fix source hard reset response for TDA 2.3.1.1 and TDA 2.3.1.2 failures USB: PHY: JZ4770: Fix static checker warning. USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb() USB: gadget: u_f: add overflow checks to VLA macros xhci: Always restore EP_SOFT_CLEAR_TOGGLE even if ep reset failed xhci: Do warm-reset when both CAS and XDEV_RESUME are set usb: host: xhci: fix ep context print mismatch in debugfs usb: uas: Add quirk for PNY Pro Elite tools: usb: move to tools buildsystem USB: Fix device driver race USB: Also match device drivers using the ->match vfunc usb: host: xhci-tegra: fix tegra_xusb_get_phy() usb: host: xhci-tegra: otg usb2/usb3 port init usb: hcd: Fix use after free in usb_hcd_pci_remove() usb: typec: ucsi: Hold con->lock for the entire duration of ucsi_register_port() ... 30 August 2020, 17:51:03 UTC
42df60f Linus Torvalds 30 August 2020, 17:47:23 UTC Merge tag 'edac_urgent_for_v5.9_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "A fix to properly clear ghes_edac driver state on driver remove so that a subsequent load can probe the system properly (Shiju Jose)" * tag 'edac_urgent_for_v5.9_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register() 30 August 2020, 17:47:23 UTC
c401128 Linus Torvalds 30 August 2020, 17:37:18 UTC Merge tag 'dma-mapping-5.9-2' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: "Fix a possibly uninitialized variable (Dan Carpenter)" * tag 'dma-mapping-5.9-2' of git://git.infradead.org/users/hch/dma-mapping: dma-pool: Fix an uninitialized variable bug in atomic_pool_expand() 30 August 2020, 17:37:18 UTC
784a083 Thomas Gleixner 30 August 2020, 17:07:53 UTC genirq/matrix: Deal with the sillyness of for_each_cpu() on UP Most of the CPU mask operations behave the same way, but for_each_cpu() and it's variants ignore the cpumask argument and claim that CPU0 is always in the mask. This is historical, inconsistent and annoying behaviour. The matrix allocator uses for_each_cpu() and can be called on UP with an empty cpumask. The calling code does not expect that this succeeds but until commit e027fffff799 ("x86/irq: Unbreak interrupt affinity setting") this went unnoticed. That commit added a WARN_ON() to catch cases which move an interrupt from one vector to another on the same CPU. The warning triggers on UP. Add a check for the cpumask being empty to prevent this. Fixes: 2f75d9e1c905 ("genirq: Implement bitmap matrix allocator") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org 30 August 2020, 17:17:28 UTC
1127b21 Linus Torvalds 29 August 2020, 21:21:58 UTC Merge tag 'fallthrough-fixes-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo A. R. Silva: "Fix some minor issues introduced by the recent treewide fallthrough conversions: - Fix identation issue - Fix erroneous fallthrough annotation - Remove unnecessary fallthrough annotation - Fix code comment changed by fallthrough conversion" * tag 'fallthrough-fixes-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: arm64/cpuinfo: Remove unnecessary fallthrough annotation media: dib0700: Fix identation issue in dib8096_set_param_override() afs: Remove erroneous fallthough annotation iio: dpot-dac: fix code comment in dpot_dac_read_raw() 29 August 2020, 21:21:58 UTC
0a4c56c Linus Torvalds 29 August 2020, 20:50:56 UTC fsldma: fix very broken 32-bit ppc ioread64 functionality Commit ef91bb196b0d ("kernel.h: Silence sparse warning in lower_32_bits") caused new warnings to show in the fsldma driver, but that commit was not to blame: it only exposed some very incorrect code that tried to take the low 32 bits of an address. That made no sense for multiple reasons, the most notable one being that that code was intentionally limited to only 32-bit ppc builds, so "only low 32 bits of an address" was completely nonsensical. There were no high bits to mask off to begin with. But even more importantly fropm a correctness standpoint, turning the address into an integer then caused the subsequent address arithmetic to be completely wrong too, and the "+1" actually incremented the address by one, rather than by four. Which again was incorrect, since the code was reading two 32-bit values and trying to make a 64-bit end result of it all. Surprisingly, the iowrite64() did not suffer from the same odd and incorrect model. This code has never worked, but it's questionable whether anybody cared: of the two users that actually read the 64-bit value (by way of some C preprocessor hackery and eventually the 'get_cdar()' inline function), one of them explicitly ignored the value, and the other one might just happen to work despite the incorrect value being read. This patch at least makes it not fail the build any more, and makes the logic superficially sane. Whether it makes any difference to the code _working_ or not shall remain a mystery. Compile-tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 29 August 2020, 20:50:56 UTC
e77aee1 Linus Torvalds 29 August 2020, 20:13:44 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A core fix for ACPI matching and two driver bugfixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: iproc: Fix shifting 31 bits i2c: rcar: in slave mode, clear NACK earlier i2c: acpi: Remove dead code, i.e. i2c_acpi_match_device() i2c: core: Don't fail PRP0001 enumeration when no ID table exist 29 August 2020, 20:13:44 UTC
1b46b92 Linus Torvalds 29 August 2020, 19:51:58 UTC Merge tag 's390-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Disable preemption trace in percpu macros since the lockdep code itself uses percpu variables now and it causes recursions. - Fix kernel space 4-level paging broken by recent vmem rework. * tag 's390-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vmem: fix vmem_add_range for 4-level paging s390: don't trace preemption in percpu macros 29 August 2020, 19:51:58 UTC
c8b5563 Linus Torvalds 29 August 2020, 19:44:30 UTC Merge tag 'for-linus-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two fixes for Xen: one needed for ongoing work to support virtio with Xen, and one for a corner case in IRQ handling with Xen" * tag 'for-linus-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: Add misuse warning to virt_to_gfn xen/xenbus: Fix granting of vmalloc'd memory XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information. 29 August 2020, 19:44:30 UTC
e4cad13 Linus Torvalds 29 August 2020, 19:37:00 UTC Merge tag 'hwmon-for-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix tempeerature scale in gsc-hwmon driver - Fix divide by 0 error in nct7904 driver - Drop non-existing attribute from pmbus/isl68137 driver - Fix status check in applesmc driver * tag 'hwmon-for-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gsc-hwmon) Scale temperature to millidegrees hwmon: (applesmc) check status earlier. hwmon: (nct7904) Correct divide by 0 hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_1 telemetry for RAA228228 29 August 2020, 19:37:00 UTC
4d41ead Linus Torvalds 28 August 2020, 23:38:29 UTC Merge tag 'block-5.9-2020-08-28' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - nbd timeout fix (Hou) - device size fix for loop LOOP_CONFIGURE (Martijn) - MD pull from Song with raid5 stripe size fix (Yufen) * tag 'block-5.9-2020-08-28' of git://git.kernel.dk/linux-block: md/raid5: make sure stripe_size as power of two loop: Set correct device size when using LOOP_CONFIGURE nbd: restore default timeout when setting it to zero 28 August 2020, 23:38:29 UTC
24148d8 Linus Torvalds 28 August 2020, 23:23:16 UTC Merge tag 'io_uring-5.9-2020-08-28' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: "A few fixes in here, all based on reports and test cases from folks using it. Most of it is stable material as well: - Hashed work cancelation fix (Pavel) - poll wakeup signalfd fix - memlock accounting fix - nonblocking poll retry fix - ensure we never return -ERESTARTSYS for reads - ensure offset == -1 is consistent with preadv2() as documented - IOPOLL -EAGAIN handling fixes - remove useless task_work bounce for block based -EAGAIN retry" * tag 'io_uring-5.9-2020-08-28' of git://git.kernel.dk/linux-block: io_uring: don't bounce block based -EAGAIN retry off task_work io_uring: fix IOPOLL -EAGAIN retries io_uring: clear req->result on IOPOLL re-issue io_uring: make offset == -1 consistent with preadv2/pwritev2 io_uring: ensure read requests go through -ERESTART* transformation io_uring: don't use poll handler if file can't be nonblocking read/written io_uring: fix imbalanced sqo_mm accounting io_uring: revert consumed iov_iter bytes on error io-wq: fix hang after cancelling pending hashed work io_uring: don't recurse on tsk->sighand->siglock with signalfd 28 August 2020, 23:23:16 UTC
005c534 Linus Torvalds 28 August 2020, 20:23:31 UTC Merge tag 'devprop-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Prevent the promotion of the secondary firmware node of a device to the primary one from leaking a pointer (Heikki Krogerus)" * tag 'devprop-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Fix the secondary firmware node handling in set_primary_fwnode() 28 August 2020, 20:23:31 UTC
0b2f18e Linus Torvalds 28 August 2020, 20:17:14 UTC Merge tag 'acpi-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix two recent issues in the ACPI memory mappings management code and tighten up error handling in the ACPI driver for AMD SoCs (APD). Specifics: - Avoid redundant rounding to the page size in acpi_os_map_iomem() to address a recently introduced issue with the EFI memory map permission check on ARM64 (Ard Biesheuvel). - Fix acpi_release_memory() to wait until the memory mappings released by it have been really unmapped (Rafael Wysocki). - Make the ACPI driver for AMD SoCs (APD) check the return value of acpi_dev_get_property() to avoid failures in the cases when the device property under inspection is missing (Furquan Shaikh)" * tag 'acpi-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: OSL: Prevent acpi_release_memory() from returning too early ACPI: ioremap: avoid redundant rounding to OS page size ACPI: SoC: APD: Check return value of acpi_dev_get_property() 28 August 2020, 20:17:14 UTC
326e311 Linus Torvalds 28 August 2020, 20:12:09 UTC Merge tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix the recently added Tegra194 cpufreq driver and the handling of devices using runtime PM during system-wide suspend, improve the intel_pstate driver documentation and clean up the cpufreq core. Specifics: - Make the recently added Tegra194 cpufreq driver use read_cpuid_mpir() instead of cpu_logical_map() to avoid exporting logical_cpu_map (Sumit Gupta). - Drop the automatic system wakeup event reporting for devices with pending runtime-resume requests during system-wide suspend to avoid spurious aborts of the suspend flow (Rafael Wysocki). - Fix build warning in the intel_pstate driver documentation and improve the wording in there (Randy Dunlap). - Clean up two pieces of code in the cpufreq core (Viresh Kumar)" * tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Use WARN_ON_ONCE() for invalid relation cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq() PM: sleep: core: Fix the handling of pending runtime resume requests Documentation: fix pm/intel_pstate build warning and wording cpufreq: replace cpu_logical_map() with read_cpuid_mpir() 28 August 2020, 20:12:09 UTC
4f31d53 Rafael J. Wysocki 28 August 2020, 19:17:56 UTC Merge branch 'acpi-mm' * acpi-mm: ACPI: OSL: Prevent acpi_release_memory() from returning too early ACPI: ioremap: avoid redundant rounding to OS page size 28 August 2020, 19:17:56 UTC
ef7d960 Rafael J. Wysocki 28 August 2020, 18:58:16 UTC Merge branch 'pm-cpufreq' * pm-cpufreq: cpufreq: Use WARN_ON_ONCE() for invalid relation cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq() Documentation: fix pm/intel_pstate build warning and wording cpufreq: replace cpu_logical_map() with read_cpuid_mpir() 28 August 2020, 18:58:16 UTC
96d454c Linus Torvalds 28 August 2020, 18:37:33 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix kernel build with the integrated LLVM assembler which doesn't see the -Wa,-march option. - Fix "make vdso_install" when COMPAT_VDSO is disabled. - Make KVM more robust if the AT S1E1R instruction triggers an exception (architecture corner cases). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception KVM: arm64: Survive synchronous exceptions caused by AT instructions KVM: arm64: Add kvm_extable for vaxorcism code arm64: vdso32: make vdso32 install conditional arm64: use a common .arch preamble for inline assembly 28 August 2020, 18:37:33 UTC
ef91bb1 Herbert Xu 28 August 2020, 07:11:25 UTC kernel.h: Silence sparse warning in lower_32_bits I keep getting sparse warnings in crypto such as: CHECK drivers/crypto/ccree/cc_hash.c drivers/crypto/ccree/cc_hash.c:49:9: warning: cast truncates bits from constant value (47b5481dbefa4fa4 becomes befa4fa4) drivers/crypto/ccree/cc_hash.c:49:26: warning: cast truncates bits from constant value (db0c2e0d64f98fa7 becomes 64f98fa7) [.. many more ..] This patch removes the warning by adding a mask to keep sparse happy. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 August 2020, 18:21:20 UTC
e309428 Linus Torvalds 28 August 2020, 17:57:14 UTC Merge tag 'writeback_for_v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull writeback fixes from Jan Kara: "Fixes for writeback code occasionally skipping writeback of some inodes or livelocking sync(2)" * tag 'writeback_for_v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: writeback: Drop I_DIRTY_TIME_EXPIRE writeback: Fix sync livelock due to b_dirty_time processing writeback: Avoid skipping inode writeback writeback: Protect inode->i_io_list with inode->i_lock 28 August 2020, 17:57:14 UTC
40129b8 Linus Torvalds 28 August 2020, 17:41:00 UTC Merge tag 'gfs2-v5.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: "Fix a memory leak on filesystem withdraw. We didn't detect this bug because we have slab merging on by default (CONFIG_SLAB_MERGE_DEFAULT). Adding 'slub_nomerge' to the kernel command line exposed the problem" * tag 'gfs2-v5.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: add some much needed cleanup for log flushes that fail 28 August 2020, 17:41:00 UTC
b0bfd5e Linus Torvalds 28 August 2020, 17:33:04 UTC Merge tag 'ceph-for-5.9-rc3' of git://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "We have an inode number handling change, prompted by s390x which is a 64-bit architecture with a 32-bit ino_t, a patch to disallow leases to avoid potential data integrity issues when CephFS is re-exported via NFS or CIFS and a fix for the bulk of W=1 compilation warnings" * tag 'ceph-for-5.9-rc3' of git://github.com/ceph/ceph-client: ceph: don't allow setlease on cephfs ceph: fix inode number handling on arches with 32-bit ino_t libceph: add __maybe_unused to DEFINE_CEPH_FEATURE 28 August 2020, 17:33:04 UTC
e183785 Paulo Alcantara 27 August 2020, 14:20:19 UTC cifs: fix check of tcon dfs in smb1 For SMB1, the DFS flag should be checked against tcon->Flags rather than tcon->share_flags. While at it, add an is_tcon_dfs() helper to check for DFS capability in a more generic way. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com> 28 August 2020, 17:27:33 UTC
3a7c327 Linus Torvalds 28 August 2020, 17:15:33 UTC Merge tag 'mfd-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fixes from Lee Jones: - fix double free - handle devicetree disabled devices gracefully * tag 'mfd-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: mfd-core: Ensure disabled devices are ignored without error mfd: core: Fix double-free in mfd_remove_devices_fn() 28 August 2020, 17:15:33 UTC
5ec06b5 Linus Torvalds 28 August 2020, 16:46:48 UTC Merge tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "As expected a bit of an rc3 uptick, amdgpu and msm are the main ones, one msm patch was from the merge window, but had dependencies and we dropped it until the other tree had landed. Otherwise it's a couple of fixes for core, and etnaviv, and single i915, exynos, omap fixes. I'm still tracking the Sandybridge gpu relocations issue, if we don't see much movement I might just queue up the reverts. I'll talk to Daniel next week once he's back from holidays. core: - Take modeset bkl for legacy drivers dp_mst: - Allow null crtc in dp_mst i915: - Fix command parser desc matching with masks amdgpu: - Misc display fixes - Backlight fixes - MPO fix for DCN1 - Fixes for Sienna Cichlid - Fixes for Navy Flounder - Vega SW CTF fixes - SMU fix for Raven - Fix a possible overflow in INFO ioctl - Gfx10 clockgating fix msm: - opp/bw scaling patch followup - frequency restoring fux - vblank in atomic commit fix - dpu modesetting fixes - fencing fix etnaviv: - scheduler interaction fix - gpu init regression fix exynos: - Just drop __iommu annotation to fix sparse warning omap: - locking state fix" * tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm: (41 commits) drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init drm/amdgpu: disable runtime pm for navy_flounder drm/amd/display: Retry AUX write when fail occurs drm/amdgpu: Fix buffer overflow in INFO ioctl drm/amd/powerplay: Fix hardmins not being sent to SMU for RV drm/amdgpu: use MODE1 reset for navy_flounder by default drm/amd/pm: correct the thermal alert temperature limit settings drm/amdgpu: add asd fw check before loading asd drm/amd/display: Keep current gain when ABM disable immediately drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation drm/amd/display: Revert HDCP disable sequence change drm/amd/display: Send DISPLAY_OFF after power down on boot drm/amdgpu/gfx10: refine mgcg setting drm/amd/pm: correct Vega20 swctf limit setting drm/amd/pm: correct Vega12 swctf limit setting drm/amd/pm: correct Vega10 swctf limit setting drm/amd/pm: set VCN pg per instances drm/amd/pm: enable run_btc callback for sienna_cichlid drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps drm/amd/display: Reject overlay plane configurations in multi-display scenarios ... 28 August 2020, 16:46:48 UTC
71a7f8c James Morse 21 August 2020, 14:07:07 UTC KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception AT instructions do a translation table walk and return the result, or the fault in PAR_EL1. KVM uses these to find the IPA when the value is not provided by the CPU in HPFAR_EL1. If a translation table walk causes an external abort it is taken as an exception, even if it was due to an AT instruction. (DDI0487F.a's D5.2.11 "Synchronous faults generated by address translation instructions") While we previously made KVM resilient to exceptions taken due to AT instructions, the device access causes mismatched attributes, and may occur speculatively. Prevent this, by forbidding a walk through memory described as device at stage2. Now such AT instructions will report a stage2 fault. Such a fault will cause KVM to restart the guest. If the AT instructions always walk the page tables, but guest execution uses the translation cached in the TLB, the guest can't make forward progress until the TLB entry is evicted. This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending"), KVM will return to the host to process IRQs allowing the rest of the system to keep running. Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending") Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 28 August 2020, 14:27:47 UTC
88a84cc James Morse 21 August 2020, 14:07:06 UTC KVM: arm64: Survive synchronous exceptions caused by AT instructions KVM doesn't expect any synchronous exceptions when executing, any such exception leads to a panic(). AT instructions access the guest page tables, and can cause a synchronous external abort to be taken. The arm-arm is unclear on what should happen if the guest has configured the hardware update of the access-flag, and a memory type in TCR_EL1 that does not support atomic operations. B2.2.6 "Possible implementation restrictions on using atomic instructions" from DDI0487F.a lists synchronous external abort as a possible behaviour of atomic instructions that target memory that isn't writeback cacheable, but the page table walker may behave differently. Make KVM robust to synchronous exceptions caused by AT instructions. Add a get_user() style helper for AT instructions that returns -EFAULT if an exception was generated. While KVM's version of the exception table mixes synchronous and asynchronous exceptions, only one of these can occur at each location. Re-enter the guest when the AT instructions take an exception on the assumption the guest will take the same exception. This isn't guaranteed to make forward progress, as the AT instructions may always walk the page tables, but guest execution may use the translation cached in the TLB. This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending"), KVM will return to the host to process IRQs allowing the rest of the system to keep running. Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending") Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 28 August 2020, 14:23:46 UTC
e9ee186 James Morse 21 August 2020, 14:07:05 UTC KVM: arm64: Add kvm_extable for vaxorcism code KVM has a one instruction window where it will allow an SError exception to be consumed by the hypervisor without treating it as a hypervisor bug. This is used to consume asynchronous external abort that were caused by the guest. As we are about to add another location that survives unexpected exceptions, generalise this code to make it behave like the host's extable. KVM's version has to be mapped to EL2 to be accessible on nVHE systems. The SError vaxorcism code is a one instruction window, so has two entries in the extable. Because the KVM code is copied for VHE and nVHE, we end up with four entries, half of which correspond with code that isn't mapped. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 28 August 2020, 14:23:42 UTC
a433d72 Jens Axboe 28 August 2020, 13:52:02 UTC Merge branch 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.9 Pull MD fix from Song. * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid5: make sure stripe_size as power of two 28 August 2020, 13:52:02 UTC
5d28ba5 Frank van der Linden 27 August 2020, 23:40:12 UTC arm64: vdso32: make vdso32 install conditional vdso32 should only be installed if CONFIG_COMPAT_VDSO is enabled, since it's not even supposed to be compiled otherwise, and arm64 builds without a 32bit crosscompiler will fail. Fixes: 8d75785a8142 ("ARM64: vdso32: Install vdso32 from vdso_install") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Cc: stable@vger.kernel.org [5.4+] Link: https://lore.kernel.org/r/20200827234012.19757-1-fllinden@amazon.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 28 August 2020, 12:18:48 UTC
1764c3e Sami Tolvanen 27 August 2020, 20:36:08 UTC arm64: use a common .arch preamble for inline assembly Commit 7c78f67e9bd9 ("arm64: enable tlbi range instructions") breaks LLVM's integrated assembler, because -Wa,-march is only passed to external assemblers and therefore, the new instructions are not enabled when IAS is used. This change adds a common architecture version preamble, which can be used in inline assembly blocks that contain instructions that require a newer architecture version, and uses it to fix __TLBI_0 and __TLBI_1 with ARM64_TLB_RANGE. Fixes: 7c78f67e9bd9 ("arm64: enable tlbi range instructions") Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1106 Link: https://lore.kernel.org/r/20200827203608.1225689-1-samitolvanen@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 28 August 2020, 10:15:15 UTC
22380b6 Lee Jones 19 August 2020, 08:16:50 UTC mfd: mfd-core: Ensure disabled devices are ignored without error Commit e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") changed the semantics for disabled devices in mfd_add_device(). Instead of silently ignoring a disabled child device, an error was returned. On receipt of the error mfd_add_devices() the precedes to remove *all* child devices and returns an all-failed error to the caller, which will inevitably fail the parent device as well. This patch reverts back to the old semantics and ignores child devices which are disabled in Device Tree. Fixes: e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") Reported-by: Icenowy Zheng <icenowy@aosc.io> Tested-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Lee Jones <lee.jones@linaro.org> 28 August 2020, 08:51:41 UTC
20934c0 Alan Stern 26 August 2020, 14:32:29 UTC usb: storage: Add unusual_uas entry for Sony PSZ drives The PSZ-HA* family of USB disk drives from Sony can't handle the REPORT OPCODES command when using the UAS protocol. This patch adds an appropriate quirks entry. Reported-and-tested-by: Till Dörges <doerges@pre-sense.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 28 August 2020, 07:23:16 UTC
6af10a3 Yufen Yu 20 August 2020, 13:22:05 UTC md/raid5: make sure stripe_size as power of two Commit 3b5408b98e4d ("md/raid5: support config stripe_size by sysfs entry") make stripe_size as a configurable value. It just requires stripe_size as multiple of 4KB. In fact, we should make sure stripe_size as power of two. Otherwise, stripe_shift which is the result of ilog2 can not represent the real stripe_size. Then, stripe_hash() and stripe_hash_locks_hash() may get unexpected value. Fixes: 3b5408b98e4d ("md/raid5: support config stripe_size by sysfs entry") Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com> 28 August 2020, 05:41:03 UTC
4a133eb Christophe Leroy 27 August 2020, 18:30:27 UTC powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU low_sleep_handler() can't restore the context from virtual stack because the stack can hardly be accessed with MMU OFF. For now, disable VMAP stack when CONFIG_ADB_PMU is selected. Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Cc: stable@vger.kernel.org # v5.6+ Reported-by: Giuseppe Sacco <giuseppe@sguazz.it> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ec96c15bfa1a7415ab604ee1c98cd45779c08be0.1598553015.git.christophe.leroy@csgroup.eu 28 August 2020, 02:03:18 UTC
2a3f9da Dave Airlie 28 August 2020, 01:02:52 UTC Merge tag 'drm-intel-fixes-2020-08-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc3: - Fix command parser desc matching with masks Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87imd45ufw.fsf@intel.com 28 August 2020, 01:02:53 UTC
c2b2f02 Dave Airlie 28 August 2020, 00:52:28 UTC Merge tag 'drm-misc-fixes-2020-08-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.9-rc2: - Take modeset bkl for legacy drivers. - Allow null crtc in dp_mst. - Omap locking state fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7af1e52a-27de-8edc-d0b2-e23b01e8bc96@linux.intel.com 28 August 2020, 00:52:34 UTC
fdee946 Jens Axboe 27 August 2020, 22:46:24 UTC io_uring: don't bounce block based -EAGAIN retry off task_work These events happen inline from submission, so there's no need to bounce them through the original task. Just set them up for retry and issue retry directly instead of going over task_work. Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 August 2020, 22:48:34 UTC
eefdf30 Jens Axboe 27 August 2020, 22:40:19 UTC io_uring: fix IOPOLL -EAGAIN retries This normally isn't hit, as polling is mostly done on NVMe with deep queue depths. But if we do run into request starvation, we need to ensure that retries are properly serialized. Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 August 2020, 22:40:29 UTC
c165a08 Gustavo A. R. Silva 27 August 2020, 20:44:32 UTC arm64/cpuinfo: Remove unnecessary fallthrough annotation Fallthrough annotations for consecutive default and case labels are not necessary. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> 27 August 2020, 20:44:32 UTC
0cc4a0c Gustavo A. R. Silva 27 August 2020, 20:36:28 UTC media: dib0700: Fix identation issue in dib8096_set_param_override() Fix identation issues. Fixes: 5e9c85d98337 ("[media] dib8096: enhancement") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> 27 August 2020, 20:36:28 UTC
c1ae18d Tim Harvey 27 August 2020, 17:20:24 UTC hwmon: (gsc-hwmon) Scale temperature to millidegrees The GSC registers report temperature in decidegrees celcius so we need to scale it to represent the hwmon sysfs API of millidegrees. Cc: stable@vger.kernel.org Fixes: 3bce5377ef66 ("hwmon: Add Gateworks System Controller support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Link: https://lore.kernel.org/r/1598548824-16898-1-git-send-email-tharvey@gateworks.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 27 August 2020, 19:47:55 UTC
210e799 Dan Carpenter 26 August 2020, 11:32:14 UTC afs: Remove erroneous fallthough annotation The fall through annotation comes after a return statement so it's not reachable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> 27 August 2020, 19:33:01 UTC
b972fdb Shiju Jose 27 August 2020, 14:04:50 UTC EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register() After b9cae27728d1 ("EDAC/ghes: Scan the system once on driver init") and with CONFIG_DEBUG_TEST_DRIVER_REMOVE enabled, ghes_hw.dimms becomes a NULL pointer after the second ->probe() (aka ghes_edac_register()) which the config option causes to be called. This happens because the static variable which holds down whether the system has been scanned already, doesn't get reset in ghes_edac_unregister(). Then, on the second probe, ghes_scan_system() doesn't get to enumerate the DIMMs, leading to ghes_hw.dimms remaining NULL. Clear the variable and rename it to something more descriptive so that a second probe succeeds. [ bp: Rewrite commit message. ] Fixes: b9cae27728d1 ("EDAC/ghes: Scan the system once on driver init") Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200827140450.1620-1-shiju.jose@huawei.com 27 August 2020, 16:04:07 UTC
c195d66 Herbert Xu 27 August 2020, 07:14:36 UTC crypto: af_alg - Work around empty control messages without MSG_MORE The iwd daemon uses libell which sets up the skcipher operation with two separate control messages. As the first control message is sent without MSG_MORE, it is interpreted as an empty request. While libell should be fixed to use MSG_MORE where appropriate, this patch works around the bug in the kernel so that existing binaries continue to work. We will print a warning however. A separate issue is that the new kernel code no longer allows the control message to be sent twice within the same request. This restriction is obviously incompatible with what iwd was doing (first setting an IV and then sending the real control message). This patch changes the kernel so that this is explicitly allowed. Reported-by: Caleb Jorden <caljorden@hotmail.com> Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when...") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 27 August 2020, 13:20:36 UTC
30b8e6b Viresh Kumar 27 August 2020, 05:24:16 UTC cpufreq: Use WARN_ON_ONCE() for invalid relation The relation can't be invalid here, so if it turns out to be invalid, just WARN_ON_ONCE() and return 0. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 27 August 2020, 10:51:25 UTC
681fe68 Viresh Kumar 27 August 2020, 05:24:15 UTC cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq() "cpufreq_driver" is guaranteed to be valid here, no need to check it here. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 27 August 2020, 10:51:25 UTC
16d83a5 Pratik Rajesh Sampat 26 August 2020, 08:29:18 UTC Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check" cpuidle stop state implementation has minor optimizations for P10 where hardware preserves more SPR registers compared to P9. The current P9 driver works for P10, although does few extra save-restores. P9 driver can provide the required power management features like SMT thread folding and core level power savings on a P10 platform. Until the P10 stop driver is available, revert the commit which allows for only P9 systems to utilize cpuidle and blocks all idle stop states for P10. CPU idle states are enabled and tested on the P10 platform with this fix. This reverts commit 8747bf36f312356f8a295a0c39ff092d65ce75ae. Fixes: 8747bf36f312 ("powerpc/powernv/idle: Replace CPU feature check with PVR check") Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com> Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200826082918.89306-1-psampat@linux.ibm.com 27 August 2020, 07:41:45 UTC
82715a0 Athira Rajeev 26 August 2020, 06:40:29 UTC powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc IMC trace-mode uses MSR[HV/PR] bits to set the cpumode for the instruction pointer captured in each sample. The bits are fetched from the third double word of the trace record. Reading third double word from IMC trace record should use be64_to_cpu() along with READ_ONCE inorder to fetch correct MSR[HV/PR] bits. Patch addresses this change. Currently we are using PERF_RECORD_MISC_HYPERVISOR as cpumode if MSR HV is 1 and PR is 0 which means the address is from host counter. But using PERF_RECORD_MISC_HYPERVISOR for host counter data will fail to resolve the address -> symbol during "perf report" because perf tools side uses PERF_RECORD_MISC_KERNEL to represent the host counter data. Therefore, fix the trace imc sample data to use PERF_RECORD_MISC_KERNEL as cpumode for host kernel information. Fixes: 77ca3951cc37 ("powerpc/perf: Add kernel support for new MSR[HV PR] bits in trace-imc") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1598424029-1662-1-git-send-email-atrajeev@linux.vnet.ibm.com 27 August 2020, 07:41:45 UTC
b460b51 Alexey Kardashevskiy 02 June 2020, 02:56:12 UTC powerpc/perf: Fix crashes with generic_compat_pmu & BHRB The bhrb_filter_map ("The Branch History Rolling Buffer") callback is only defined in raw CPUs' power_pmu structs. The "architected" CPUs use generic_compat_pmu, which does not have this callback, and crashes occur if a user tries to enable branch stack for an event. This add a NULL pointer check for bhrb_filter_map() which behaves as if the callback returned an error. This does not add the same check for config_bhrb() as the only caller checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0. Fixes: be80e758d0c2 ("powerpc/perf: Add generic compat mode pmu driver") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200602025612.62707-1-aik@ozlabs.ru 27 August 2020, 07:41:44 UTC
b91eb51 Michael Ellerman 25 August 2020, 09:34:24 UTC powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode The recent commit 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") changed some of the handling of floating point/vector restore. In particular it caused current->thread.fpexc_mode to be copied into the current MSR (via msr_check_and_set()), rather than just into regs->msr (which is moved into MSR on return to userspace). This can lead to a crash in the kernel if we take a floating point exception when restoring FPSCR: Oops: Exception in kernel mode, sig: 8 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 3 PID: 101213 Comm: ld64.so.2 Not tainted 5.9.0-rc1-00098-g18445bf405cb-dirty #9 NIP: c00000000000fbb4 LR: c00000000001a7ac CTR: c000000000183570 REGS: c0000016b7cfb3b0 TRAP: 0700 Not tainted (5.9.0-rc1-00098-g18445bf405cb-dirty) MSR: 900000000290b933 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002444 XER: 00000000 CFAR: c00000000001a7a8 IRQMASK: 1 GPR00: c00000000001ae40 c0000016b7cfb640 c0000000011b7f00 c000001542a0f740 GPR04: c000001542a0f720 c000001542a0eb00 0000000000000900 c000001542a0eb00 GPR08: 000000000000000a 0000000000002000 9000000000009033 0000000000000000 GPR12: 0000000000004000 c0000017ffffd900 0000000000000001 c000000000df5a58 GPR16: c000000000e19c18 c0000000010e1123 0000000000000001 c000000000e1a638 GPR20: 0000000000000000 c0000000044b1d00 0000000000000000 c000001542a0f2a0 GPR24: 00000016c7fe0000 c000001542a0f720 c000000001c93da0 c000000000fe5f28 GPR28: c000001542a0f720 0000000000800000 c0000016b7cfbe90 0000000002802900 NIP load_fp_state+0x4/0x214 LR restore_math+0x17c/0x1f0 Call Trace: 0xc0000016b7cfb680 (unreliable) __switch_to+0x330/0x460 __schedule+0x318/0x920 schedule+0x74/0x140 schedule_timeout+0x318/0x3f0 wait_for_completion+0xc8/0x210 call_usermodehelper_exec+0x234/0x280 do_coredump+0xedc/0x13c0 get_signal+0x1d4/0xbe0 do_notify_resume+0x1a0/0x490 interrupt_exit_user_prepare+0x1c4/0x230 interrupt_return+0x14/0x1c0 Instruction dump: ebe10168 e88101a0 7c8ff120 382101e0 e8010010 7c0803a6 4e800020 790605c4 782905c4 7c0008a8 7c0008a8 c8030200 <fffe058e> 48000088 c8030000 c8230010 Fix it by only loading the fpexc_mode value into regs->msr. Also add a comment to explain that although VSX is subject to the value of fpexc_mode, we don't have to handle that separately because we only allow VSX to be enabled if FP is also enabled. Fixes: 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") Reported-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Link: https://lore.kernel.org/r/20200825093424.3967813-1-mpe@ellerman.id.au 27 August 2020, 07:41:39 UTC
e5fe560 Nicholas Piggin 25 August 2020, 07:53:09 UTC powerpc/64s: scv entry should set PPR Kernel entry sets PPR to HMT_MEDIUM by convention. The scv entry path missed this. Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200825075309.224184-1-npiggin@gmail.com 27 August 2020, 07:41:13 UTC
aa661d7 Randy Dunlap 24 August 2020, 00:31:16 UTC Documentation/powerpc: fix malformed table in syscall64-abi Fix malformed table warning in powerpc/syscall64-abi.rst by making two tables and moving the headings. Documentation/powerpc/syscall64-abi.rst:53: WARNING: Malformed table. Text in column margin in table line 2. =========== ============= ======================================== --- For the sc instruction, differences with the ELF ABI --- r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) cr0 Volatile (cr0.SO is the return error condition.) cr1, cr5-7 Nonvolatile lr Nonvolatile --- For the scv 0 instruction, differences with the ELF ABI --- r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) =========== ============= ======================================== Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e06de4d3-a36f-2745-9775-467e125436cc@infradead.org 27 August 2020, 07:40:55 UTC
4d618b9 Michael Ellerman 21 August 2020, 10:49:10 UTC video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n The build is currently broken, if COMPILE_TEST=y and PPC_PMAC=n: linux/drivers/video/fbdev/controlfb.c: In function ‘control_set_hardware’: linux/drivers/video/fbdev/controlfb.c:276:2: error: implicit declaration of function ‘btext_update_display’ 276 | btext_update_display(p->frame_buffer_phys + CTRLFB_OFF, | ^~~~~~~~~~~~~~~~~~~~ Fix it by including btext.h whenever CONFIG_BOOTX_TEXT is enabled. Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://lore.kernel.org/r/20200821104910.3363818-1-mpe@ellerman.id.au 27 August 2020, 07:40:50 UTC
e027fff Thomas Gleixner 26 August 2020, 20:21:44 UTC x86/irq: Unbreak interrupt affinity setting Several people reported that 5.8 broke the interrupt affinity setting mechanism. The consolidation of the entry code reused the regular exception entry code for device interrupts and changed the way how the vector number is conveyed from ptregs->orig_ax to a function argument. The low level entry uses the hardware error code slot to push the vector number onto the stack which is retrieved from there into a function argument and the slot on stack is set to -1. The reason for setting it to -1 is that the error code slot is at the position where pt_regs::orig_ax is. A positive value in pt_regs::orig_ax indicates that the entry came via a syscall. If it's not set to a negative value then a signal delivery on return to userspace would try to restart a syscall. But there are other places which rely on pt_regs::orig_ax being a valid indicator for syscall entry. But setting pt_regs::orig_ax to -1 has a nasty side effect vs. the interrupt affinity setting mechanism, which was overlooked when this change was made. Moving interrupts on x86 happens in several steps. A new vector on a different CPU is allocated and the relevant interrupt source is reprogrammed to that. But that's racy and there might be an interrupt already in flight to the old vector. So the old vector is preserved until the first interrupt arrives on the new vector and the new target CPU. Once that happens the old vector is cleaned up, but this cleanup still depends on the vector number being stored in pt_regs::orig_ax, which is now -1. That -1 makes the check for cleanup: pt_regs::orig_ax == new_vector always false. As a consequence the interrupt is moved once, but then it cannot be moved anymore because the cleanup of the old vector never happens. There would be several ways to convey the vector information to that place in the guts of the interrupt handling, but on deeper inspection it turned out that this check is pointless and a leftover from the old affinity model of X86 which supported multi-CPU affinities. Under this model it was possible that an interrupt had an old and a new vector on the same CPU, so the vector match was required. Under the new model the effective affinity of an interrupt is always a single CPU from the requested affinity mask. If the affinity mask changes then either the interrupt stays on the CPU and on the same vector when that CPU is still in the new affinity mask or it is moved to a different CPU, but it is never moved to a different vector on the same CPU. Ergo the cleanup check for the matching vector number is not required and can be removed which makes the dependency on pt_regs:orig_ax go away. The remaining check for new_cpu == smp_processsor_id() is completely sufficient. If it matches then the interrupt was successfully migrated and the cleanup can proceed. For paranoia sake add a warning into the vector assignment code to validate that the assumption of never moving to a different vector on the same CPU holds. Fixes: 633260fa143 ("x86/irq: Convey vector as argument and not in ptregs") Reported-by: Alex bykov <alex.bykov@scylladb.com> Reported-by: Avi Kivity <avi@scylladb.com> Reported-by: Alexander Graf <graf@amazon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexander Graf <graf@amazon.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87wo1ltaxz.fsf@nanos.tec.linutronix.de 27 August 2020, 07:29:23 UTC
52d6b92 Ashok Raj 27 August 2020, 04:12:10 UTC x86/hotplug: Silence APIC only after all interrupts are migrated There is a race when taking a CPU offline. Current code looks like this: native_cpu_disable() { ... apic_soft_disable(); /* * Any existing set bits for pending interrupt to * this CPU are preserved and will be sent via IPI * to another CPU by fixup_irqs(). */ cpu_disable_common(); { .... /* * Race window happens here. Once local APIC has been * disabled any new interrupts from the device to * the old CPU are lost */ fixup_irqs(); // Too late to capture anything in IRR. ... } } The fix is to disable the APIC *after* cpu_disable_common(). Testing was done with a USB NIC that provided a source of frequent interrupts. A script migrated interrupts to a specific CPU and then took that CPU offline. Fixes: 60dcaad5736f ("x86/hotplug: Silence APIC and NMI when CPU is dead") Reported-by: Evan Green <evgreen@chromium.org> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Evan Green <evgreen@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/875zdarr4h.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/r/1598501530-45821-1-git-send-email-ashok.raj@intel.com 27 August 2020, 07:29:23 UTC
9aa3778 Cyril Roelandt 25 August 2020, 21:22:31 UTC USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge This device does not support UAS properly and a similar entry already exists in drivers/usb/storage/unusual_uas.h. Without this patch, storage_probe() defers the handling of this device to UAS, which cannot handle it either. Tested-by: Brice Goglin <brice.goglin@gmail.com> Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 August 2020, 07:26:00 UTC
1d41698 Tang Bin 26 August 2020, 14:49:31 UTC usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe() If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 August 2020, 07:25:58 UTC
bfd08d0 Andy Shevchenko 26 August 2020, 19:21:19 UTC USB: gadget: u_f: Unbreak offset calculation in VLAs Inadvertently the commit b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") makes VLA macros to always return 0 due to different scope of two variables of the same name. Obviously we need to have only one. Fixes: b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Brooke Basile <brookebasile@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 August 2020, 07:25:06 UTC
068834a Alan Stern 26 August 2020, 19:46:24 UTC USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D The Sound Devices MixPre-D audio card suffers from the same defect as the Sound Devices USBPre2: an endpoint shared between a normal audio interface and a vendor-specific interface, in violation of the USB spec. Since the USB core now treats duplicated endpoints as bugs and ignores them, the audio endpoint isn't available and the card can't be used for audio capture. Along the same lines as commit bdd1b147b802 ("USB: quirks: blacklist duplicate ep on Sound Devices USBPre2"), this patch adds a quirks entry saying to ignore ep5in for interface 1, leaving it available for use with standard audio interface 2. Reported-and-tested-by: Jean-Christophe Barnoud <jcbarnoud@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") Link: https://lore.kernel.org/r/20200826194624.GA412633@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 27 August 2020, 07:24:05 UTC
892fc9f Dan Carpenter 26 August 2020, 11:33:30 UTC dma-pool: Fix an uninitialized variable bug in atomic_pool_expand() The "page" pointer can be used with out being initialized. Fixes: d7e673ec2c8e ("dma-pool: Only allocate from CMA when in same memory zone") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 27 August 2020, 07:22:56 UTC
9d3004b Simon Leiner 25 August 2020, 09:31:53 UTC arm/xen: Add misuse warning to virt_to_gfn As virt_to_gfn uses virt_to_phys, it will return invalid addresses when used with vmalloc'd addresses. This patch introduces a warning, when virt_to_gfn is used in this way. Signed-off-by: Simon Leiner <simon@leiner.me> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-2-simon@leiner.me Signed-off-by: Juergen Gross <jgross@suse.com> 27 August 2020, 06:58:51 UTC
d742db7 Simon Leiner 25 August 2020, 09:31:52 UTC xen/xenbus: Fix granting of vmalloc'd memory On some architectures (like ARM), virt_to_gfn cannot be used for vmalloc'd memory because of its reliance on virt_to_phys. This patch introduces a check for vmalloc'd addresses and obtains the PFN using vmalloc_to_pfn in that case. Signed-off-by: Simon Leiner <simon@leiner.me> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.me Signed-off-by: Juergen Gross <jgross@suse.com> 27 August 2020, 06:58:48 UTC
c330fb1 Thomas Gleixner 25 August 2020, 15:22:58 UTC XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information. handler data is meant for interrupt handlers and not for storing irq chip specific information as some devices require handler data to store internal per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers. This obviously creates a conflict of interests and crashes the machine because the XEN pointer is overwritten by the driver pointer. As the XEN data is not handler specific it should be stored in irqdesc::irq_data::chip_data instead. A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that. Cc: stable@vger.kernel.org Reported-by: Roman Shaposhnik <roman@zededa.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Roman Shaposhnik <roman@zededa.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de Signed-off-by: Juergen Gross <jgross@suse.com> 27 August 2020, 06:32:36 UTC
e035803 Dave Airlie 27 August 2020, 02:44:04 UTC Merge tag 'amd-drm-fixes-5.9-2020-08-26' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-08-26: amdgpu: - Misc display fixes - Backlight fixes - MPO fix for DCN1 - Fixes for Sienna Cichlid - Fixes for Navy Flounder - Vega SW CTF fixes - SMU fix for Raven - Fix a possible overflow in INFO ioctl - Gfx10 clockgating fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826200801.17735-1-alexander.deucher@amd.com 27 August 2020, 02:44:05 UTC
60a1065 Dave Airlie 27 August 2020, 02:36:32 UTC Merge tag 'drm-msm-fixes-2020-08-24' of https://gitlab.freedesktop.org/drm/msm into drm-fixes Some fixes for v5.9 plus the one opp/bandwidth scaling patch ("drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR") which was not included in the initial pull due to dependency on patch landing thru OPP tree Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGt45A4ObyhEdC5Ga4f4cAf-NBSVRECu7df3Gh6-X4G3tQ@mail.gmail.com 27 August 2020, 02:37:44 UTC
6284a41 Dave Airlie 27 August 2020, 02:34:06 UTC Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes Two fixes: One fixes a bad interaction with the DRM scheduler, leading to some dma fences not getting signalled after hitting the job timeout. The other one fixes a GPU init regression, as apparently one old core doesn't likes us reading some of the identification registers. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/aceebfe3af636346f5252bdf727cdd988bdcbdf2.camel@pengutronix.de 27 August 2020, 02:34:32 UTC
234a2c4 Dave Airlie 27 August 2020, 02:22:22 UTC Merge tag 'exynos-drm-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes One fixup - Just drop __iommu annotation to fix sparse warning. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <daeinki@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826071520.3140-1-daeinki@gmail.com 27 August 2020, 02:33:02 UTC
56450c2 Jens Axboe 27 August 2020, 00:58:26 UTC io_uring: clear req->result on IOPOLL re-issue Make sure we clear req->result, which was set to -EAGAIN for retry purposes, when moving it to the reissue list. Otherwise we can end up retrying a request more than once, which leads to weird results in the io-wq handling (and other spots). Cc: stable@vger.kernel.org Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 27 August 2020, 00:58:26 UTC
b67a468 Dinghao Liu 26 August 2020, 13:24:58 UTC drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init When amdgpu_display_modeset_create_props() fails, state and state->context should be freed to prevent memleak. It's the same when amdgpu_dm_audio_init() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:45:52 UTC
82dff83 Jiansong Chen 26 August 2020, 06:11:52 UTC drm/amdgpu: disable runtime pm for navy_flounder Disable runtime pm for navy_flounder temporarily. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:45:52 UTC
ef67d79 Wayne Lin 18 August 2020, 03:19:42 UTC drm/amd/display: Retry AUX write when fail occurs [Why] In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We suppose every write wil get done successfully and hence some AUX commands might not sent out indeed. [How] Check if AUX_WR success. If not, retry it. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:45:51 UTC
b5b97ca Alex Deucher 25 August 2020, 15:43:45 UTC drm/amdgpu: Fix buffer overflow in INFO ioctl The values for "se_num" and "sh_num" come from the user in the ioctl. They can be in the 0-255 range but if they're more than AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in an out of bounds read. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 26 August 2020, 19:45:51 UTC
e2bf372 Nicholas Kazlauskas 14 August 2020, 15:49:13 UTC drm/amd/powerplay: Fix hardmins not being sent to SMU for RV [Why] DC uses these to raise the voltage as needed for higher dispclk/dppclk and to ensure that we have enough bandwidth to drive the displays. There's a bug preventing these from actuially sending messages since it's checking the actual clock (which is 0) instead of the incoming clock (which shouldn't be 0) when deciding to send the hardmin. [How] Check the clocks != 0 instead of the actual clocks. Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 26 August 2020, 19:45:51 UTC
7594754 Jiansong Chen 25 August 2020, 07:39:57 UTC drm/amdgpu: use MODE1 reset for navy_flounder by default Switch default gpu reset method to MODE1 for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:45:51 UTC
28e6286 Evan Quan 25 August 2020, 02:35:11 UTC drm/amd/pm: correct the thermal alert temperature limit settings Do the maths in celsius degree. This can fix the issues caused by the changes below: drm/amd/pm: correct Vega20 swctf limit setting drm/amd/pm: correct Vega12 swctf limit setting drm/amd/pm: correct Vega10 swctf limit setting Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 26 August 2020, 19:45:38 UTC
14e4f3b Tao Zhou 28 July 2020, 04:44:59 UTC drm/amdgpu: add asd fw check before loading asd asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:27:52 UTC
cba4b52 Brandon Syu 10 June 2020, 08:44:33 UTC drm/amd/display: Keep current gain when ABM disable immediately [Why] When system enters s3/s0i3, backlight PWM would set user level. [How] ABM disable function add keep current gain to avoid it. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:27:52 UTC
efbde23 Samson Tam 13 August 2020, 14:50:21 UTC drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation [Why] dongle_type is set during dongle connection but for passive dongles, dongle_type is not set. If user starts with an active dongle and then switches to a passive dongle, it will still report as an active dongle. Trying to emulate the wrong connecter type results in display not lighting up. [How] Set dpcd_caps.dongle_type for passive dongles in detect_dp(). Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:27:51 UTC
b61f056 Jaehyun Chung 10 August 2020, 20:02:47 UTC drm/amd/display: Revert HDCP disable sequence change [Why] Revert HDCP disable sequence change that blanks stream before disabling HDCP. PSP and HW teams are currently investigating the root cause of why HDCP cannot be disabled before stream blank, which is expected to work without issues. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:27:51 UTC
d2ce14f Sung Lee 11 August 2020, 21:23:20 UTC drm/amd/display: Send DISPLAY_OFF after power down on boot [WHY] update_clocks might not be called on headless adapters. This means DISPLAY_OFF may not be sent in headless cases. [HOW] If hardware is powered down on boot because it is headless (mode set does not happen on that adapter) also send DISPLAY_OFF notification. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:18:41 UTC
de7a1b0 Jiansong Chen 24 August 2020, 10:44:09 UTC drm/amdgpu/gfx10: refine mgcg setting 1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang. 2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 26 August 2020, 19:17:16 UTC
9b51c4b Evan Quan 21 August 2020, 04:21:30 UTC drm/amd/pm: correct Vega20 swctf limit setting Correct the Vega20 thermal swctf limit. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 26 August 2020, 19:16:44 UTC
e0ffd34 Evan Quan 21 August 2020, 04:18:58 UTC drm/amd/pm: correct Vega12 swctf limit setting Correct the Vega12 thermal swctf limit. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 26 August 2020, 19:16:18 UTC
b05d71b Evan Quan 21 August 2020, 04:05:03 UTC drm/amd/pm: correct Vega10 swctf limit setting Correct the Vega10 thermal swctf limit. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267 Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 26 August 2020, 19:15:45 UTC
317951e Jiansong Chen 21 August 2020, 08:20:47 UTC drm/amd/pm: set VCN pg per instances When deciding whether to set pg for vcn1, instances number is more generic than chip name. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:14:57 UTC
f2cdef6 Jiansong Chen 21 August 2020, 03:30:19 UTC drm/amd/pm: enable run_btc callback for sienna_cichlid DC BTC support for sienna_cichlid is added, it provides the DC tolerance and aging measurements. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:13:31 UTC
5896585 Furquan Shaikh 20 August 2020, 07:52:41 UTC drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps In `amdgpu_dm_update_backlight_caps()`, there is a local `amdgpu_dm_backlight_caps` object that is filled in by `amdgpu_acpi_get_backlight_caps()`. However, this object is uninitialized before the call and hence the subsequent check for aux_support can fail since it is not initialized by `amdgpu_acpi_get_backlight_caps()` as well. This change initializes this local `amdgpu_dm_backlight_caps` object to 0. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:13:14 UTC
168f09c Nicholas Kazlauskas 19 August 2020, 17:37:54 UTC drm/amd/display: Reject overlay plane configurations in multi-display scenarios [Why] These aren't stable on some platform configurations when driving multiple displays, especially on higher resolution. In particular the delay in asserting p-state and validating from x86 outweights any power or performance benefit from the hardware composition. Under some configurations this will manifest itself as extreme stutter or unresponsiveness especially when combined with cursor movement. [How] Disable these for now. Exposing overlays to userspace doesn't guarantee that they'll be able to use them in any and all configurations and it's part of the DRM contract to have userspace gracefully handle validation failures when they occur. Valdiation occurs as part of DC and this in particular affects RV, so disable this in dcn10_global_validation. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:12:21 UTC
69d9f42 Alexander Monakov 04 August 2020, 20:13:13 UTC drm/amd/display: use correct scale for actual_brightness Documentation for sysfs backlight level interface requires that values in both 'brightness' and 'actual_brightness' files are interpreted to be in range from 0 to the value given in the 'max_brightness' file. With amdgpu, max_brightness gives 255, and values written by the user into 'brightness' are internally rescaled to a wider range. However, reading from 'actual_brightness' gives the raw register value without inverse rescaling. This causes issues for various userspace tools such as PowerTop and systemd that expect the value to be in the correct range. Introduce a helper to retrieve internal backlight range. Use it to reimplement 'convert_brightness' as 'convert_brightness_from_user' and introduce 'convert_brightness_to_user'. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242 Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 26 August 2020, 19:11:40 UTC
ed9ab22 Tong Zhang 16 August 2020, 07:32:12 UTC drm/amd/display: should check error using DC_OK core_link_read_dpcd returns only DC_OK(1) and DC_ERROR_UNEXPECTED(-1), the caller should check error using DC_OK instead of checking against 0 Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 26 August 2020, 19:11:09 UTC
b19a8b3 Gustavo A. R. Silva 25 August 2020, 23:57:12 UTC iio: dpot-dac: fix code comment in dpot_dac_read_raw() After the replacement of the /* fall through */ comment with the fallthrough pseudo-keyword macro, the natural reading of a code comment was broken. Fix the natural reading of such a comment and make it intelligible. Reported-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> 26 August 2020, 19:02:24 UTC
back to top