| 00b3e0a | Marek Skuczynski | 30 January 2010, 21:27:41 UTC | sh: Fix access to released memory in dwarf_unwinder_cleanup() Signed-off-by: Marek Skuczynski <mareksk7@gmail.com> Acked-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org> | 02 February 2010, 02:32:22 UTC |
| e5ff15b | Magnus Damm | 27 January 2010, 07:41:19 UTC | usb: r8a66597-hdc disable interrupts fix This patch improves disable_controller() in the r8a66597-hdc driver to disable all interrupts and clear status flags. It also makes sure that disable_controller() is called during probe(). This fixes the relatively rare case of unexpected pending interrupts after kexec reboot. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> | 02 February 2010, 02:30:45 UTC |
| e8708ef | Markus Pietrek | 02 February 2010, 02:29:15 UTC | spi: spi_sh_msiof: Fixed data sampling on the correct edge The spi_sh_msiof.c driver presently misconfigures REDG and TEDG. TEDG==0 outputs data at the **rising edge** of the clock and REDG==0 samples data at the **falling edge** of the clock. Therefore for SPI, TEDG must be equal to REDG, otherwise the last byte received is not sampled in SPI mode 3. This brings the driver in line with the SH7723 HW Reference Manual settings documented in Figures 20.20 and 20.21 ("SPI Clock and data timing"). Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org> | 02 February 2010, 02:29:15 UTC |
| ab65832 | Linus Torvalds | 01 February 2010, 18:57:12 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: AM3517: ASoC driver not getting compiled ASoC: AIC23: Fixing writes to non-existing registers in resume function ALSA: hda - Add an ASUS mobo to MSI blacklist | 01 February 2010, 18:57:12 UTC |
| 9ce9290 | Linus Torvalds | 01 February 2010, 18:46:49 UTC | Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure. drm/radeon/kms: move radeon KMS on/off switch out of staging. drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3 drm/vmwgfx: Don't send bad flags to the host drm/vmwgfx: Request SVGA version 2 and bail if not found drm/vmwgfx: Correctly detect 3D drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c drm/kms: Remove incorrect comment in struct drm_mode_modeinfo drm/ttm: remove padding from ttm_ref_object on 64bit builds drm/radeon/kms: release agp on error. drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info drm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’ drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching. drm/kms/radeon: pick digitial encoders smarter. (v3) drm/radeon/kms: use active device to pick connector for encoder drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking. | 01 February 2010, 18:46:49 UTC |
| 13af757 | Linus Torvalds | 01 February 2010, 18:46:18 UTC | Merge branch 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: reiserfs: Fix vmalloc call under reiserfs lock | 01 February 2010, 18:46:18 UTC |
| e20da89 | Linus Torvalds | 01 February 2010, 18:45:26 UTC | Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: Fix check_usage_backwards() error message | 01 February 2010, 18:45:26 UTC |
| 834db33 | Linus Torvalds | 01 February 2010, 18:45:00 UTC | Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, hw_breakpoint, kgdb: Do not take mutex for kernel debugger x86, hw_breakpoints, kgdb: Fix kgdb to use hw_breakpoint API hw_breakpoints: Release the bp slot if arch_validate_hwbkpt_settings() fails. perf: Ignore perf.data.old perf report: Fix segmentation fault when running with '-g none' | 01 February 2010, 18:45:00 UTC |
| 8ea85c2 | Linus Torvalds | 01 February 2010, 18:44:36 UTC | Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Correct printk whitespace in warning from cpu down task check sched: Fix incorrect sanity check sched: Fix fork vs hotplug vs cpuset namespaces | 01 February 2010, 18:44:36 UTC |
| bdd8466 | Linus Torvalds | 01 February 2010, 18:44:06 UTC | Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: Prevent potential kgdb dead lock | 01 February 2010, 18:44:06 UTC |
| 935cc93 | Linus Torvalds | 01 February 2010, 18:43:01 UTC | Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing/documentation: Cover new frame pointer semantics tracing/documentation: Fix a typo in ftrace.txt ring-buffer: Check for end of page in iterator ring-buffer: Check if ring buffer iterator has stale data tracing: Prevent kernel oops with corrupted buffer | 01 February 2010, 18:43:01 UTC |
| 4ca5ded | Linus Torvalds | 01 February 2010, 18:42:35 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/agp: Fix agp_amd64_init regression x86: Add quirk for Intel DG45FC board to avoid low memory corruption x86: Add Dell OptiPlex 760 reboot quirk x86, UV: Fix RTC latency bug by reading replicated cachelines oprofile/x86: add Xeon 7500 series support oprofile/x86: fix crash when profiling more than 28 events lib/dma-debug.c: mark file-local struct symbol static. x86/amd-iommu: Fix deassignment of a device from the pt_domain x86/amd-iommu: Fix IOMMU-API initialization for iommu=pt x86/amd-iommu: Fix NULL pointer dereference in __detach_device() x86/amd-iommu: Fix possible integer overflow | 01 February 2010, 18:42:35 UTC |
| ed23690 | Linus Torvalds | 01 February 2010, 18:42:08 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Specify REGULATOR_CHANGE_STATUS for WM835x LED constraints | 01 February 2010, 18:42:08 UTC |
| 32337f8 | Linus Torvalds | 01 February 2010, 18:37:58 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: TIF_ABI_PENDING bit removal powerpc/pseries: Fix xics build without CONFIG_SMP powerpc/4xx: Add pcix type 1 transactions powerpc/pci: Add missing call to header fixup powerpc/pci: Add missing hookup to pci_slot powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge() powerpc/40x: Update the PowerPC 40x board defconfigs powerpc/44x: Update PowerPC 44x board defconfigs | 01 February 2010, 18:37:58 UTC |
| a2fad9b | Mark Brown | 04 January 2010, 15:30:54 UTC | regulator: Specify REGULATOR_CHANGE_STATUS for WM835x LED constraints The WM8350 LED driver needs to be able to enable and disable the regulators it is using. Previously the core wasn't properly enforcing status change constraints so the driver was able to function but this has always been intended to be required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> | 01 February 2010, 13:52:44 UTC |
| 94f28da | Andreas Schwab | 30 January 2010, 10:20:59 UTC | powerpc: TIF_ABI_PENDING bit removal Here are the powerpc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 01 February 2010, 03:00:30 UTC |
| 17aafcc | Michel Dänzer | 22 January 2010, 08:20:00 UTC | drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure. If radeon_cs_parser_init() fails, radeon_cs_ioctl() calls radeon_cs_parser_fini() with the non-zero error value. The latter dereferenced parser->ib which hasn't been initialized yet -> boom. Add a test for parser->ib being non-NULL before dereferencing it. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 02:49:28 UTC |
| bf647fa | Benjamin Herrenschmidt | 01 February 2010, 02:32:41 UTC | powerpc/pseries: Fix xics build without CONFIG_SMP desc->affinity doesn't exit in that case. Let's use a macro for the UP variant of get_irq_server(), it's the easiest way, avoids evaluating arguments. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 01 February 2010, 02:32:41 UTC |
| f71d018 | Dave Airlie | 01 February 2010, 01:35:47 UTC | drm/radeon/kms: move radeon KMS on/off switch out of staging. We are happy enough that the KMS driver is stable enough for enough people for the kms enable/disable to leave staging. Distros can now contemplate turning this on. Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:35:47 UTC |
| ff82f05 | Jerome Glisse | 22 January 2010, 14:19:00 UTC | drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3 If an error happen in r600_blit_prepare_copy report it rather than WARNING and keeping execution. For instance if ib allocation failed we did just warn about but then latter tried to access NULL ib ptr causing oops. This patch also protect r600_copy_blit with a mutex as otherwise one process might overwrite blit temporary data with new one possibly leading to GPU lockup. Should partialy or totaly fix: https://bugzilla.redhat.com/show_bug.cgi?id=553279 V2 failing blit initialization is not fatal, fallback to memcpy when this happen V3 init blit before startup as we pin in startup, remove duplicate code (this one was actualy tested unlike V2) Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:33:11 UTC |
| 5ffdb65 | Jakob Bornecrantz | 30 January 2010, 03:38:08 UTC | drm/vmwgfx: Don't send bad flags to the host Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:29:59 UTC |
| c188660 | Peter Hanzel | 30 January 2010, 03:38:07 UTC | drm/vmwgfx: Request SVGA version 2 and bail if not found This fixes the driver not loading on older versions of VMware. Signed-off-by: Peter Hanzel <hanzelpeter@gmail.com> Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:29:31 UTC |
| 8e19a95 | Jakob Bornecrantz | 30 January 2010, 03:38:06 UTC | drm/vmwgfx: Correctly detect 3D Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:29:03 UTC |
| 110b20c | Austin Yuan | 21 January 2010, 05:45:40 UTC | drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c Signed-off-by: Austin Yuan <shengquan.yuan@gmail.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:27:25 UTC |
| fa5829b | Marcin Kościelnicki | 23 January 2010, 00:25:28 UTC | drm/kms: Remove incorrect comment in struct drm_mode_modeinfo Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:26:39 UTC |
| dd5fde6 | Richard Kennedy | 26 January 2010, 17:10:48 UTC | drm/ttm: remove padding from ttm_ref_object on 64bit builds Re-order structure ttm_ref_object to remove 8 bytes of alignment padding on 64 bit builds, so shrinking its size from 72 to 64 bytes allowing it to fit into a smaller slab. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:24:50 UTC |
| 4b86628 | Dave Airlie | 01 February 2010, 01:22:10 UTC | drm/radeon/kms: release agp on error. if we get an error, release the AGP if we've acquired it already. Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:22:10 UTC |
| 2dea2e2 | John Kacur | 31 January 2010, 19:38:03 UTC | drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info First call drm_agp_acquire to check if agp has been acquired. Second call drm_agp_info to fill in the info data struct, including aper_size. Finally do the check to see if the aper_size makes sense. Signed-off-by: John Kacur <jkacur@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:19:31 UTC |
| cdb6e37 | John Kacur | 31 January 2010, 19:38:02 UTC | drm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’ - Fix warning by using %zu instead of %d for size_t - Fix spelling mistake, "to" should be "too". Signed-off-by: John Kacur <jkacur@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:19:08 UTC |
| db78e27 | Francisco Jerez | 12 January 2010, 17:49:43 UTC | drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching. Fixes errors like: > reserve_ram_pages_type failed 0x15b7a000-0x15b7b000, track 0x8, req 0x10 when a BO is moved between WC and UC areas. Reported-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 01:15:37 UTC |
| f28cf33 | Dave Airlie | 28 January 2010, 07:15:25 UTC | drm/kms/radeon: pick digitial encoders smarter. (v3) booting a Lenovo W500 with LVDS + DP outputs showed up a TODO we had on our list, to pick a correct digital encoder block. The LVTMA encoder requires the second digital encoder, all others can use any encoder at all. This fixes the digital encoder selection logic to enable LVDS/DP combos to work okay. V2: fix silly addition of connector dig_block and cleanup the other places in the code that pick the encoder. V3: rename to dig_encoder and clean up further - also fix the picking algorithm. tested on Lenovo W500 + desktop 3650 cards. Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 00:13:15 UTC |
| 43c33ed | Dave Airlie | 29 January 2010, 05:55:30 UTC | drm/radeon/kms: use active device to pick connector for encoder On the W500 we have UNIPHY routed to both DVI and DP, this seems to always pick the DVI connector which means link training fails. Switch to using active device to pick the connector, this seems like it should be safe from a code review, and it fixes things a bit more here. Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 00:12:26 UTC |
| 97b94cc | Dave Airlie | 29 January 2010, 05:31:47 UTC | drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking. This makes displayport work again here. Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 February 2010, 00:12:17 UTC |
| f3f1e14 | Takashi Iwai | 31 January 2010, 13:41:05 UTC | Merge branch 'fix/asoc' into for-linus | 31 January 2010, 13:41:05 UTC |
| 74ce25c | Takashi Iwai | 31 January 2010, 13:40:58 UTC | Merge branch 'fix/hda' into for-linus | 31 January 2010, 13:40:58 UTC |
| 61684ce | FUJITA Tomonori | 25 January 2010, 05:10:47 UTC | x86/agp: Fix agp_amd64_init regression This fixes the regression introduced by commit 42590a75019a50012f25a962246498dead428433 ("x86/agp: Fix agp_amd64_init and agp_amd64_cleanup"). The above commit changes agp_amd64_init() not to do anything if gart_iommu_aperture is not zero. If GART iommu calls agp_amd64_init(), we need to skip agp_amd64_init() when it's called later via module_init. The problem is that gart_iommu_init() calls agp_amd64_init() with not zero gart_iommu_aperture so agp_amd64_init() is never initialized. When gart_iommu_init() calls agp_amd64_init(), agp should be always initialized. Reported-by: Marin Mitov <mitov@issp.bas.bg> Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Marin Mitov <mitov@issp.bas.bg> Tested-by: Kevin Winchester <kjwinchester@gmail.com> Cc: davej@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20100125141006O.fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 31 January 2010, 06:52:26 UTC |
| 5352ae6 | Jason Wessel | 28 January 2010, 23:04:43 UTC | perf, hw_breakpoint, kgdb: Do not take mutex for kernel debugger This patch fixes the regression in functionality where the kernel debugger and the perf API do not nicely share hw breakpoint reservations. The kernel debugger cannot use any mutex_lock() calls because it can start the kernel running from an invalid context. A mutex free version of the reservation API needed to get created for the kernel debugger to safely update hw breakpoint reservations. The possibility for a breakpoint reservation to be concurrently processed at the time that kgdb interrupts the system is improbable. Should this corner case occur the end user is warned, and the kernel debugger will prohibit updating the hardware breakpoint reservations. Any time the kernel debugger reserves a hardware breakpoint it will be a system wide reservation. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: torvalds@linux-foundation.org LKML-Reference: <1264719883-7285-3-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 30 January 2010, 07:42:21 UTC |
| cc09674 | Jason Wessel | 28 January 2010, 23:04:42 UTC | x86, hw_breakpoints, kgdb: Fix kgdb to use hw_breakpoint API In the 2.6.33 kernel, the hw_breakpoint API is now used for the performance event counters. The hw_breakpoint_handler() now consumes the hw breakpoints that were previously set by kgdb arch specific code. In order for kgdb to work in conjunction with this core API change, kgdb must use some of the low level functions of the hw_breakpoint API to install, uninstall, and deal with hw breakpoint reservations. The kgdb core required a change to call kgdb_disable_hw_debug anytime a slave cpu enters kgdb_wait() in order to keep all the hw breakpoints in sync as well as to prevent hitting a hw breakpoint while kgdb is active. During the architecture specific initialization of kgdb, it will pre-allocate 4 disabled (struct perf event **) structures. Kgdb will use these to manage the capabilities for the 4 hw breakpoint registers, per cpu. Right now the hw_breakpoint API does not have a way to ask how many breakpoints are available, on each CPU so it is possible that the install of a breakpoint might fail when kgdb restores the system to the run state. The intent of this patch is to first get the basic functionality of hw breakpoints working and leave it to the person debugging the kernel to understand what hw breakpoints are in use and what restrictions have been imposed as a result. Breakpoint constraints will be dealt with in a future patch. While atomic, the x86 specific kgdb code will call arch_uninstall_hw_breakpoint() and arch_install_hw_breakpoint() to manage the cpu specific hw breakpoints. The net result of these changes allow kgdb to use the same pool of hw_breakpoints that are used by the perf event API, but neither knows about future reservations for the available hw breakpoint slots. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: torvalds@linux-foundation.org LKML-Reference: <1264719883-7285-2-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 30 January 2010, 07:42:20 UTC |
| 7c099ce | David Härdeman | 28 January 2010, 20:02:54 UTC | x86: Add quirk for Intel DG45FC board to avoid low memory corruption Commit 6aa542a694dc9ea4344a8a590d2628c33d1b9431 added a quirk for the Intel DG45ID board due to low memory corruption. The Intel DG45FC shares the same BIOS (and the same bug) as noted in: http://bugzilla.kernel.org/show_bug.cgi?id=13736 Signed-off-by: David Härdeman <david@hardeman.nu> LKML-Reference: <20100128200254.GA9134@hardeman.nu> Cc: <stable@kernel.org> Cc: Alexey Fisher <bug-track@fisher-privat.net> Cc: ykzhao <yakui.zhao@intel.com> Cc: Tony Bones <aabonesml@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: H. Peter Anvin <hpa@zytor.com> | 29 January 2010, 23:45:53 UTC |
| abe94c7 | Linus Torvalds | 29 January 2010, 21:57:50 UTC | Linux 2.6.33-rc6 | 29 January 2010, 21:57:50 UTC |
| 4995c0b | Dmitry Artamonow | 23 January 2010, 21:20:20 UTC | mfd: Fix asic3 build asic3 also needs tmio_core or otherwise will fail to build. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 29 January 2010, 20:03:09 UTC |
| 499a267 | Linus Torvalds | 29 January 2010, 19:15:32 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: update multi-touch protocol documentation Input: add the ABS_MT_PRESSURE event Input: winbond-cir - remove dmesg spam Input: lifebook - add another Lifebook DMI signature Input: ad7879 - support auxiliary GPIOs via gpiolib | 29 January 2010, 19:15:32 UTC |
| a701623 | Hugh Dickins | 29 January 2010, 17:46:34 UTC | mm: fix migratetype bug which slowed swapping After memory pressure has forced it to dip into the reserves, 2.6.32's 5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 "page-allocator: split per-cpu list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves. Fix that in the most straightforward way (which, considering the overheads of alternative approaches, is Mel's preference): the right migratetype is already in page_private(page), but free_pcppages_bulk() wasn't using it. How did this bug show up? As a 20% slowdown in my tmpfs loop kbuild swapping tests, on PowerMac G5 with SLUB allocator. Bisecting to that commit was easy, but explaining the magnitude of the slowdown not easy. The same effect appears, but much less markedly, with SLAB, and even less markedly on other machines (the PowerMac divides into fewer zones than x86, I think that may be a factor). We guess that lumpy reclaim of short-lived high-order pages is implicated in some way, and probably this bug has been tickling a poor decision somewhere in page reclaim. But instrumentation hasn't told me much, I've run out of time and imagination to determine exactly what's going on, and shouldn't hold up the fix any longer: it's valid, and might even fix other misbehaviours. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 January 2010, 18:28:09 UTC |
| 67f15b0 | Linus Torvalds | 29 January 2010, 18:27:37 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check total number of devices when removing missing Btrfs: check return value of open_bdev_exclusive properly Btrfs: do not mark the chunk as readonly if in degraded mode Btrfs: run orphan cleanup on default fs root Btrfs: fix a memory leak in btrfs_init_acl Btrfs: Use correct values when updating inode i_size on fallocate Btrfs: remove tree_search() in extent_map.c Btrfs: Add mount -o compress-force | 29 January 2010, 18:27:37 UTC |
| 94673e9 | David Miller | 29 January 2010, 05:42:02 UTC | sparc: TIF_ABI_PENDING bit removal Here are the sparc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 January 2010, 16:22:01 UTC |
| 05d43ed | H. Peter Anvin | 29 January 2010, 06:14:43 UTC | x86: get rid of the insane TIF_ABI_PENDING bit Now that the previous commit made it possible to do the personality setting at the point of no return, we do just that for ELF binaries. And suddenly all the reasons for that insane TIF_ABI_PENDING bit go away, and we can just make SET_PERSONALITY() just do the obvious thing for a 32-bit compat process. Everything becomes much more straightforward this way. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 January 2010, 16:22:01 UTC |
| 221af7f | Linus Torvalds | 29 January 2010, 06:14:42 UTC | Split 'flush_old_exec' into two functions 'flush_old_exec()' is the point of no return when doing an execve(), and it is pretty badly misnamed. It doesn't just flush the old executable environment, it also starts up the new one. Which is very inconvenient for things like setting up the new personality, because we want the new personality to affect the starting of the new environment, but at the same time we do _not_ want the new personality to take effect if flushing the old one fails. As a result, the x86-64 '32-bit' personality is actually done using this insane "I'm going to change the ABI, but I haven't done it yet" bit (TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the personality, but just the "pending" bit, so that "flush_thread()" can do the actual personality magic. This patch in no way changes any of that insanity, but it does split the 'flush_old_exec()' function up into a preparatory part that can fail (still called flush_old_exec()), and a new part that will actually set up the new exec environment (setup_new_exec()). All callers are changed to trivially comply with the new world order. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 January 2010, 16:22:01 UTC |
| 5bbd495 | Anuj Aggarwal | 29 January 2010, 10:19:22 UTC | ASoC: AM3517: ASoC driver not getting compiled Commit 761c9d45 (ASoC: Fix build of OMAP sound drivers) changes CONFIG_MACH_OMAP3517EVM -> CONFIG_SND_OMAP_SOC_OMAP3517EVM in the Makefile. Whereas the config option defined in Kconfig is SND_OMAP_SOC_AM3517EVM. Because of this, ASoC driver for AM3517 was not getting compiled. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 29 January 2010, 13:43:51 UTC |
| 3e59aaa | Anuj Aggarwal | 29 January 2010, 08:28:55 UTC | ASoC: AIC23: Fixing writes to non-existing registers in resume function Commit e9ff5eb2 (Fixing infinite loop in resume path) uses wrong AIC23 register in resume function because of which register writes happen on some non-existing registers. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 29 January 2010, 13:42:37 UTC |
| f6bdc23 | Henrik Rydberg | 29 January 2010, 06:28:28 UTC | Input: update multi-touch protocol documentation This patch documents a new ABS_MT parameter and adds further text to clarify some points around the MT protocol. Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 29 January 2010, 06:32:52 UTC |
| cb6ecf6 | Henrik Rydberg | 29 January 2010, 06:28:27 UTC | Input: add the ABS_MT_PRESSURE event For pressure-based multi-touch devices, a direct way to send sensor intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE event to the MT protocol. Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 29 January 2010, 06:32:45 UTC |
| 93fb84b | David Härdeman | 29 January 2010, 06:28:27 UTC | Input: winbond-cir - remove dmesg spam I missed converting one dev_info call to deb_dbg before submitting the driver. Without this change, a message will be printed to dmesg for each button press if a RC6 remote is used. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: stable <stable@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 29 January 2010, 06:32:38 UTC |
| e90c52e | Benjamin Herrenschmidt | 29 January 2010, 05:52:27 UTC | Merge commit 'jwb/merge' into merge | 29 January 2010, 05:52:27 UTC |
| d234b3c | Stef van Os | 20 January 2010, 03:59:39 UTC | powerpc/4xx: Add pcix type 1 transactions Some of the newer 4xx pci cores need an explicit bit set to send type 1 transactions instead of just comparing the bus numbers. This patch enables type 1 transations for pcix nodes, thus enabling devices behind PCI bridges. Signed-off-by: Stef van Os <stef.van.os@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 29 January 2010, 05:51:12 UTC |
| 94afc00 | Benjamin Herrenschmidt | 26 January 2010, 17:10:05 UTC | powerpc/pci: Add missing call to header fixup Add missing call to pci_fixup_device(pci_fixup_early, ...) when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 29 January 2010, 05:51:11 UTC |
| 26b4a0c | Benjamin Herrenschmidt | 26 January 2010, 17:10:05 UTC | powerpc/pci: Add missing hookup to pci_slot Add missing hookup to existing pci_slot when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 29 January 2010, 05:51:10 UTC |
| bb209c8 | Benjamin Herrenschmidt | 26 January 2010, 17:10:03 UTC | powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge() We are missing these when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> | 29 January 2010, 05:51:10 UTC |
| 64a028a | Linus Torvalds | 29 January 2010, 02:48:53 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Fix failure exit in ipathfs fix oops in fs/9p late mount failure fix leak in romfs_fill_super() get rid of pointless checks after simple_pin_fs() Fix failure exits in bfs_fill_super() fix affs parse_options() Fix remount races with symlink handling in affs Fix a leak in affs_fill_super() | 29 January 2010, 02:48:53 UTC |
| 3d29935 | Linus Torvalds | 29 January 2010, 00:33:12 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: remove IOH range fetching PCI: fix nested spinlock hang in aer_inject | 29 January 2010, 00:33:12 UTC |
| 474118d | Linus Torvalds | 28 January 2010, 22:34:11 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Update mach-types [ARM] orion5x: D-link DNS-323 rev. B1 power-off [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2 [ARM] pxa: fix irq suspend/resume for pxa25x [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two | 28 January 2010, 22:34:11 UTC |
| ba45d52 | Russell King | 28 January 2010, 22:15:55 UTC | [ARM] Update mach-types Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 28 January 2010, 22:17:45 UTC |
| 0b6c135 | Russell King | 28 January 2010, 21:59:58 UTC | Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 | 28 January 2010, 21:59:58 UTC |
| 035fe03 | Josef Bacik | 27 January 2010, 02:09:38 UTC | Btrfs: check total number of devices when removing missing If you have a disk failure in RAID1 and then add a new disk to the array, and then try to remove the missing volume, it will fail. The reason is the sanity check only looks at the total number of rw devices, which is just 2 because we have 2 good disks and 1 bad one. Instead check the total number of devices in the array to make sure we can actually remove the device. Tested this with a failed disk setup and with this test we can now run btrfs-vol -r missing /mount/point and it works fine. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:39 UTC |
| 7f59203 | Josef Bacik | 27 January 2010, 02:09:00 UTC | Btrfs: check return value of open_bdev_exclusive properly Hit this problem while testing RAID1 failure stuff. open_bdev_exclusive returns ERR_PTR(), not NULL. So change the return value properly. This is important if you accidently specify a device that doesn't exist when trying to add a new device to an array, you will panic the box dereferencing bdev. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:39 UTC |
| f48b907 | Josef Bacik | 27 January 2010, 02:07:59 UTC | Btrfs: do not mark the chunk as readonly if in degraded mode If a RAID setup has chunks that span multiple disks, and one of those disks has failed, btrfs_chunk_readonly will return 1 since one of the disks in that chunk's stripes is dead and therefore not writeable. So instead if we are in degraded mode, return 0 so we can go ahead and allocate stuff. Without this patch all of the block groups in a RAID1 setup will end up read-only, which will mean we can't add new disks to the array since we won't be able to make allocations. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:39 UTC |
| e3acc2a | Josef Bacik | 26 January 2010, 14:30:53 UTC | Btrfs: run orphan cleanup on default fs root This patch revert's commit 6c090a11e1c403b727a6a8eff0b97d5fb9e95cb5 Since it introduces this problem where we can run orphan cleanup on a volume that can have orphan entries re-added. Instead of my original fix, Yan Zheng pointed out that we can just revert my original fix and then run the orphan cleanup in open_ctree after we look up the fs_root. I have tested this with all the tests that gave me problems and this patch fixes both problems. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:39 UTC |
| f858153 | Yang Hongyang | 26 January 2010, 00:48:23 UTC | Btrfs: fix a memory leak in btrfs_init_acl In btrfs_init_acl() cloned acl is not released Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:39 UTC |
| d1ea6a6 | Aneesh Kumar K.V | 20 January 2010, 07:28:54 UTC | Btrfs: Use correct values when updating inode i_size on fallocate commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825 Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Date: Wed Jan 20 12:57:53 2010 +0530 Btrfs: Use correct values when updating inode i_size on fallocate Even though we allocate more, we should be updating inode i_size as per the arguments passed Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:38 UTC |
| b8d9bfe | Miao Xie | 15 December 2009, 06:54:17 UTC | Btrfs: remove tree_search() in extent_map.c This patch removes tree_search() in extent_map.c because it is not called by anything. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:38 UTC |
| a555f81 | Chris Mason | 28 January 2010, 21:18:15 UTC | Btrfs: Add mount -o compress-force The default btrfs mount -o compress mode will quickly back off compressing a file if it notices that compression does not reduce the size of the data being written. This can save considerable CPU because all future writes to the file go through uncompressed. But some files are both very large and have mixed data stored in them. In that case, we want to add the ability to always try compressing data before writing it. This commit adds mount -o compress-force. A later commit will add a new inode flag that does the same thing. Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:18:15 UTC |
| d4d37bd | Linus Torvalds | 28 January 2010, 20:59:43 UTC | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs MIPS: PowerTV: Streamline access to platform device registers MIPS: Fix vmlinuz build for 32bit-only math shells MIPS: Add support of LZO-compressed kernels | 28 January 2010, 20:59:43 UTC |
| 551e28d | Linus Torvalds | 28 January 2010, 20:57:50 UTC | Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6 * 'for-linus' of git://git.infradead.org/ubi-2.6: UBI: fix volume creation input checking | 28 January 2010, 20:57:50 UTC |
| b39bda6 | Linus Torvalds | 28 January 2010, 20:56:23 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix crashes with TSB43AB23 on 64bit systems firewire: core: fix use-after-free regression in FCP handler firewire: cdev: add_descriptor documentation fix firewire: core: add_descriptor size check | 28 January 2010, 20:56:23 UTC |
| e8e06ea | Jeff Garrett | 28 January 2010, 04:02:26 UTC | x86/PCI: remove IOH range fetching Turned out to cause trouble on single IOH machines, and is superceded by _CRS on multi-IOH machines with production BIOSes. Signed-off-by: Jeff Garrett <jeff@jgarrett.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> | 28 January 2010, 16:24:11 UTC |
| b23ff0e | Mahesh Salgaonkar | 21 January 2010, 12:55:16 UTC | hw_breakpoints: Release the bp slot if arch_validate_hwbkpt_settings() fails. On a given architecture, when hardware breakpoint registration fails due to un-supported access type (read/write/execute), we lose the bp slot since register_perf_hw_breakpoint() does not release the bp slot on failure. Hence, any subsequent hardware breakpoint registration starts failing with 'no space left on device' error. This patch introduces error handling in register_perf_hw_breakpoint() function and releases bp slot on error. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Maneesh Soni <maneesh@in.ibm.com> LKML-Reference: <20100121125516.GA32521@in.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> | 28 January 2010, 13:15:51 UTC |
| bbec919 | Frederic Weisbecker | 28 January 2010, 12:43:50 UTC | reiserfs: Fix vmalloc call under reiserfs lock Vmalloc is called to allocate journal->j_cnode_free_list but we hold the reiserfs lock at this time, which raises a {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} lock inversion. Just drop the reiserfs lock at this time, as it's not even needed but kept for paranoid reasons. This fixes: [ INFO: inconsistent lock state ] 2.6.33-rc5 #1 --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd0/313 [HC0[0]:SC0[0]:HE1:SE1] takes: (&REISERFS_SB(s)->lock){+.+.?.}, at: [<c11118c8>] reiserfs_write_lock_once+0x28/0x50 {RECLAIM_FS-ON-W} state was registered at: [<c104ee32>] mark_held_locks+0x62/0x90 [<c104eefa>] lockdep_trace_alloc+0x9a/0xc0 [<c108f7b6>] kmem_cache_alloc+0x26/0xf0 [<c108621c>] __get_vm_area_node+0x6c/0xf0 [<c108690e>] __vmalloc_node+0x7e/0xa0 [<c1086aab>] vmalloc+0x2b/0x30 [<c110e1fb>] journal_init+0x6cb/0xa10 [<c10f90a2>] reiserfs_fill_super+0x342/0xb80 [<c1095665>] get_sb_bdev+0x145/0x180 [<c10f68e1>] get_super_block+0x21/0x30 [<c1094520>] vfs_kern_mount+0x40/0xd0 [<c1094609>] do_kern_mount+0x39/0xd0 [<c10aaa97>] do_mount+0x2c7/0x6d0 [<c10aaf06>] sys_mount+0x66/0xa0 [<c16198a7>] mount_block_root+0xc4/0x245 [<c1619a81>] mount_root+0x59/0x5f [<c1619b98>] prepare_namespace+0x111/0x14b [<c1619269>] kernel_init+0xcf/0xdb [<c100303a>] kernel_thread_helper+0x6/0x1c irq event stamp: 63236801 hardirqs last enabled at (63236801): [<c134e7fa>] __mutex_unlock_slowpath+0x9a/0x120 hardirqs last disabled at (63236800): [<c134e799>] __mutex_unlock_slowpath+0x39/0x120 softirqs last enabled at (63218800): [<c102f451>] __do_softirq+0xc1/0x110 softirqs last disabled at (63218789): [<c102f4ed>] do_softirq+0x4d/0x60 other info that might help us debug this: 2 locks held by kswapd0/313: #0: (shrinker_rwsem){++++..}, at: [<c1074bb4>] shrink_slab+0x24/0x170 #1: (&type->s_umount_key#19){++++..}, at: [<c10a2edd>] shrink_dcache_memory+0xfd/0x1a0 stack backtrace: Pid: 313, comm: kswapd0 Not tainted 2.6.33-rc5 #1 Call Trace: [<c134db2c>] ? printk+0x18/0x1c [<c104e7ef>] print_usage_bug+0x15f/0x1a0 [<c104ebcf>] mark_lock+0x39f/0x5a0 [<c104d66b>] ? trace_hardirqs_off+0xb/0x10 [<c1052c50>] ? check_usage_forwards+0x0/0xf0 [<c1050c24>] __lock_acquire+0x214/0xa70 [<c10438c5>] ? sched_clock_cpu+0x95/0x110 [<c10514fa>] lock_acquire+0x7a/0xa0 [<c11118c8>] ? reiserfs_write_lock_once+0x28/0x50 [<c134f03f>] mutex_lock_nested+0x5f/0x2b0 [<c11118c8>] ? reiserfs_write_lock_once+0x28/0x50 [<c11118c8>] ? reiserfs_write_lock_once+0x28/0x50 [<c11118c8>] reiserfs_write_lock_once+0x28/0x50 [<c10f05b0>] reiserfs_delete_inode+0x50/0x140 [<c10a653f>] ? generic_delete_inode+0x5f/0x150 [<c10f0560>] ? reiserfs_delete_inode+0x0/0x140 [<c10a657c>] generic_delete_inode+0x9c/0x150 [<c10a666d>] generic_drop_inode+0x3d/0x60 [<c10a5597>] iput+0x47/0x50 [<c10a2a4f>] dentry_iput+0x6f/0xf0 [<c10a2af4>] d_kill+0x24/0x50 [<c10a2d3d>] __shrink_dcache_sb+0x21d/0x2b0 [<c10a2f0f>] shrink_dcache_memory+0x12f/0x1a0 [<c1074c9e>] shrink_slab+0x10e/0x170 [<c1075177>] kswapd+0x477/0x6a0 [<c1072d10>] ? isolate_pages_global+0x0/0x1b0 [<c103e160>] ? autoremove_wake_function+0x0/0x40 [<c1074d00>] ? kswapd+0x0/0x6a0 [<c103de6c>] kthread+0x6c/0x80 [<c103de00>] ? kthread+0x0/0x80 [<c100303a>] kernel_thread_helper+0x6/0x1c Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Christian Kujau <lists@nerdbynature.de> Cc: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 12:43:50 UTC |
| 57b5e2a | Jon Dodgson | 28 January 2010, 08:07:45 UTC | Input: lifebook - add another Lifebook DMI signature There are many many ways one can capitalize "Lifebook B Series"... Signed-off-by: Jon Dodgson <crayzeejon@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 28 January 2010, 08:29:03 UTC |
| 9d3cfc4 | Frans Pop | 25 January 2010, 13:56:34 UTC | sched: Correct printk whitespace in warning from cpu down task check Due to an incorrect line break the output currently contains tabs. Also remove trailing space. The actual output that logcheck sent me looked like this: Task events/1 (pid = 10) is on cpu 1^I^I^I^I(state = 1, flags = 84208040) After this patch it becomes: Task events/1 (pid = 10) is on cpu 1 (state = 1, flags = 84208040) Signed-off-by: Frans Pop <elendilplanet.nl> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <201001251456.34996.elendil@planet.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 28 January 2010, 05:59:55 UTC |
| 1185424 | Peter Zijlstra | 21 January 2010, 15:34:27 UTC | sched: Fix incorrect sanity check We moved to migrate on wakeup, which means that sleeping tasks could still be present on offline cpus. Amend the check to only test running tasks. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 28 January 2010, 05:59:51 UTC |
| 35ea63d | Leann Ogasawara | 27 January 2010, 23:29:18 UTC | x86: Add Dell OptiPlex 760 reboot quirk Dell OptiPlex 760 hangs on reboot unless reboot=bios is used. Add quirk to reboot through the BIOS. BugLink: https://bugs.launchpad.net/bugs/488319 Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com> LKML-Reference: <1264634958.27335.1091.camel@emiko> Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> | 28 January 2010, 00:28:51 UTC |
| 010c108 | David VomLehn | 22 December 2009, 01:49:22 UTC | MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 27 January 2010, 23:03:31 UTC |
| 59dfa2f | David VomLehn | 24 December 2009, 01:34:46 UTC | MIPS: PowerTV: Streamline access to platform device registers Pre-compute addresses for the basic ASIC registers. This speeds up access and allows memory for unused configurations to be freed. In addition, uninitialized register addresses will be returned as NULL to catch bad usage quickly. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/806/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 27 January 2010, 23:03:31 UTC |
| 9c4a6fc | Alexander Clouter | 20 January 2010, 20:50:07 UTC | MIPS: Fix vmlinuz build for 32bit-only math shells POSIX requires $((<expression>)) arithmetic in sh only to have long arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit. I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is 0xffffffff94100000, and for an example 4MiB kernel VMLINUZ_LOAD_ADDRESS is made out to be: ---- alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' ffffffff94500000 alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' 80000000003fffff ---- The former is obviously correct whilst the later breaks things royally. Fortunately working with only the lower 32bit's works for both bash and dash: ---- $ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 $ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 ---- So, we can split the original 64bit string to two parts, and only calculate the low 32bit part, which is big enough (1GiB kernel sizes anyone?) for a normal Linux kernel image file, now, we calculate the VMLINUZ_LOAD_ADDRESS like this: 1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix 2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE This patch fixes vmlinuz kernel builds on systems where only a 32bit-only math shell is available. Patch Changelog: Version 2 - simplified method by using 'expr' for 'substr' and making it work with dash once again Version 1 - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error of "make clean" - Consider more cases of the VMLINUX_LOAD_ADDRESS Version 0 - initial release Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/861/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 27 January 2010, 23:03:30 UTC |
| fe1d45e | Wu Zhangjin | 15 January 2010, 12:34:46 UTC | MIPS: Add support of LZO-compressed kernels The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Patchwork: http://patchwork.linux-mips.org/patch/857/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 27 January 2010, 23:03:30 UTC |
| 00e4acb | Russell King | 27 January 2010, 22:16:05 UTC | Merge branch 'for-rmk' of git://git.marvell.com/orion | 27 January 2010, 22:16:05 UTC |
| 8ce28d6 | Takashi Iwai | 27 January 2010, 19:26:08 UTC | ALSA: hda - Add an ASUS mobo to MSI blacklist Sid Boyce reported that his machine locks up without enable_msi=0 option. This looks like another ASUS mobo with Nvidia combo. Reported-by: Sid Boyce <sboyce@blueyonder.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 27 January 2010, 19:26:08 UTC |
| be8cde8 | Linus Torvalds | 27 January 2010, 17:54:08 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree [SCSI] zfcp: Set hardware timeout as requested by BSG request. [SCSI] zfcp: Introduce bsg_timeout callback. [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout [SCSI] zfcp: add missing compat ptr conversion [SCSI] zfcp: Fix linebreak in hba trace [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request [SCSI] qla2xxx: Update version number to 8.03.01-k10. [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure. [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment. [SCSI] qla2xxx: Correct FCP2 recovery handling. [SCSI] scsi_lib: Fix bug in completion of bidi commands [SCSI] mptsas: Fix issue with chain pools allocation on katmai [SCSI] aacraid: fix File System going into read-only mode [SCSI] lpfc: fix file permissions | 27 January 2010, 17:54:08 UTC |
| 981a2ed | Linus Torvalds | 27 January 2010, 17:27:44 UTC | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix single stepped svcs with TRACE_IRQFLAGS=y [S390] zcrypt: Do not remove coprocessor for error 8/72 [S390] sclp_vt220: set initial terminal window size [S390] use set_current_state in sigsuspend [S390] irqflags: add missing types.h include [S390] dasd: fix possible NULL pointer errors | 27 January 2010, 17:27:44 UTC |
| 4bdadb9 | Chris Wilson | 27 January 2010, 13:36:32 UTC | drm/i915: Selectively enable self-reclaim Having missed the ENOMEM return via i915_gem_fault(), there are probably other paths that I also missed. By not enabling NORETRY by default these paths can run the shrinker and take memory from the system (but not from our own inactive lists because our shrinker can not run whilst we hold the struct mutex) and this may allow the system to survive a little longer whilst our drivers consume all available memory. References: OOM killer unexpectedly called with kernel 2.6.32 http://bugzilla.kernel.org/show_bug.cgi?id=14933 v2: Pass gfp into page mapping. v3: Use new read_cache_page_gfp() instead of open-coding. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 January 2010, 17:26:43 UTC |
| 7a48143 | Stefan Richter | 26 January 2010, 20:39:07 UTC | firewire: ohci: fix crashes with TSB43AB23 on 64bit systems Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour as TSB43AB22/A in dual buffer IR DMA mode: If descriptors are located at physical addresses above the 31 bit address range (2 GB), the controller will overwrite random memory. With luck, this merely prevents video reception. With only a little less luck, the machine crashes. We use the same workaround here as with TSB43AB22/A: Switch off the dual buffer capability flag and use packet-per-buffer IR DMA instead. Another possible workaround would be to limit the coherent DMA mask to 31 bits. In Linux 2.6.33, this change serves effectively only as documentation since dual buffer mode is not used for any controller anymore. But somebody might want to re-enable it in the future to make use of features of dual buffer DMA that are not available in packet-per-buffer mode. In Linux 2.6.32 and older, this update is vital for anyone with this controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or audio applications. We have at least four reports: http://bugzilla.kernel.org/show_bug.cgi?id=13808 http://marc.info/?l=linux1394-user&m=126154279004083 https://bugzilla.redhat.com/show_bug.cgi?id=552142 http://marc.info/?l=linux1394-user&m=126432246128386 Reported-by: Paul Johnson Reported-by: Ronneil Camara Reported-by: G Zornetzer Reported-by: Mark Thompson Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> | 27 January 2010, 17:24:53 UTC |
| 0531b2a | Linus Torvalds | 27 January 2010, 17:20:03 UTC | mm: add new 'read_cache_page_gfp()' helper function It's a simplified 'read_cache_page()' which takes a page allocation flag, so that different paths can control how aggressive the memory allocations are that populate a address space. In particular, the intel GPU object mapping code wants to be able to do a certain amount of own internal memory management by automatically shrinking the address space when memory starts getting tight. This allows it to dynamically use different memory allocation policies on a per-allocation basis, rather than depend on the (static) address space gfp policy. The actual new function is a one-liner, but re-organizing the helper functions to the point where you can do this with a single line of code is what most of the patch is all about. Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 January 2010, 17:20:03 UTC |
| caf0801 | Linus Torvalds | 27 January 2010, 10:49:10 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID drivers. x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG) Revert "x86: ucode-amd: Load ucode-patches once ..." x86: Disable HPET MSI on ATI SB700/SB800 x86: Set hotpluggable nodes in nodes_possible_map | 27 January 2010, 10:49:10 UTC |
| 5bc6d79 | Linus Torvalds | 27 January 2010, 10:47:24 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix UP build. | 27 January 2010, 10:47:24 UTC |
| aca3bb5 | Dimitri Sivanich | 22 January 2010, 15:41:40 UTC | x86, UV: Fix RTC latency bug by reading replicated cachelines For SGI UV node controllers (HUB) rev 2.0 or greater, use replicated cachelines to read the RTC timer. This optimization allows faster simulataneous reads from a given socket. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Cc: Jack Steiner <steiner@sgi.com> LKML-Reference: <20100122154140.GB4975@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 27 January 2010, 10:33:53 UTC |
| 7f5102c | Amerigo Wang | 25 January 2010, 05:07:30 UTC | perf: Ignore perf.data.old Tell git to ignore this file. Signed-off-by: WANG Cong <amwang@redhat.com> LKML-Reference: <20100125051052.3999.28082.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 27 January 2010, 10:31:26 UTC |
| e0b5f80 | Ingo Molnar | 27 January 2010, 10:04:40 UTC | Merge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent | 27 January 2010, 10:04:40 UTC |
| b7ae11b | Yong Wang | 22 January 2010, 01:47:50 UTC | perf report: Fix segmentation fault when running with '-g none' Segmentation fault occurs when running perf report with '-g none'. Reported-by: Austin Zhang <austin.zhang@intel.com> Signed-off-by: Yong Wang <yong.y.wang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100122014750.GA4111@ywang-moblin2.bj.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 27 January 2010, 10:01:43 UTC |
| c5ce5b4 | Mika Westerberg | 26 January 2010, 15:47:05 UTC | UBI: fix volume creation input checking Do not use an unchecked variable UBI_IOCMKVOL ioctl. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@vger.kernel.org | 27 January 2010, 09:55:43 UTC |
| b7a0afb | Ingo Molnar | 27 January 2010, 09:52:36 UTC | Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into x86/urgent | 27 January 2010, 09:52:36 UTC |
| 21ec7f6 | Martin Schwidefsky | 27 January 2010, 09:12:40 UTC | [S390] fix single stepped svcs with TRACE_IRQFLAGS=y If irq flags tracing is enabled the TRACE_IRQS_ON macros expands to a function call which clobbers registers %r0-%r5. The macro is used in the code path for single stepped system calls. The argument registers %r2-%r6 need to be restored from the stack before the system call function is called. Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 27 January 2010, 09:12:49 UTC |
