| 013567b | Naoya Horiguchi | 11 May 2018, 23:02:00 UTC | mm: migrate: fix double call of radix_tree_replace_slot() radix_tree_replace_slot() is called twice for head page, it's obviously a bug. Let's fix it. Link: http://lkml.kernel.org/r/20180423072101.GA12157@hori1.linux.bs1.fc.nec.co.jp Fixes: e71769ae5260 ("mm: enable thp migration for shmem thp") Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Zi Yan <zi.yan@sent.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2018, 00:28:45 UTC |
| 3955333 | Laura Abbott | 11 May 2018, 23:01:57 UTC | proc/kcore: don't bounds check against address 0 The existing kcore code checks for bad addresses against __va(0) with the assumption that this is the lowest address on the system. This may not hold true on some systems (e.g. arm64) and produce overflows and crashes. Switch to using other functions to validate the address range. It's currently only seen on arm64 and it's not clear if anyone wants to use that particular combination on a stable release. So this is not urgent for stable. Link: http://lkml.kernel.org/r/20180501201143.15121-1-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Tested-by: Dave Anderson <anderson@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alexey Dobriyan <adobriyan@gmail.com>a Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2018, 00:28:45 UTC |
| 7aaf772 | Roman Gushchin | 11 May 2018, 23:01:53 UTC | mm: don't show nr_indirectly_reclaimable in /proc/vmstat Don't show nr_indirectly_reclaimable in /proc/vmstat, because there is no need to export this vm counter to userspace, and some changes are expected in reclaimable object accounting, which can alter this counter. Link: http://lkml.kernel.org/r/20180425191422.9159-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2018, 00:28:45 UTC |
| 27227c7 | Pavel Tatashin | 11 May 2018, 23:01:50 UTC | mm: sections are not offlined during memory hotremove Memory hotplug and hotremove operate with per-block granularity. If the machine has a large amount of memory (more than 64G), the size of a memory block can span multiple sections. By mistake, during hotremove we set only the first section to offline state. The bug was discovered because kernel selftest started to fail: https://lkml.kernel.org/r/20180423011247.GK5563@yexl-desktop After commit, "mm/memory_hotplug: optimize probe routine". But, the bug is older than this commit. In this optimization we also added a check for sections to be in a proper state during hotplug operation. Link: http://lkml.kernel.org/r/20180427145257.15222-1-pasha.tatashin@oracle.com Fixes: 2d070eab2e82 ("mm: consider zone which is not fully populated to have holes") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2018, 00:28:45 UTC |
| 6098d7e | Vitaly Wool | 11 May 2018, 23:01:46 UTC | z3fold: fix reclaim lock-ups Do not try to optimize in-page object layout while the page is under reclaim. This fixes lock-ups on reclaim and improves reclaim performance at the same time. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20180430125800.444cae9706489f412ad12621@gmail.com Signed-off-by: Vitaly Wool <vitaly.vul@sony.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: <Oleksiy.Avramchenko@sony.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2018, 00:28:45 UTC |
| ae646f0 | Jeffrey Hugo | 11 May 2018, 23:01:42 UTC | init: fix false positives in W+X checking load_module() creates W+X mappings via __vmalloc_node_range() (from layout_and_allocate()->move_module()->module_alloc()) by using PAGE_KERNEL_EXEC. These mappings are later cleaned up via "call_rcu_sched(&freeinit->rcu, do_free_init)" from do_init_module(). This is a problem because call_rcu_sched() queues work, which can be run after debug_checkwx() is run, resulting in a race condition. If hit, the race results in a nasty splat about insecure W+X mappings, which results in a poor user experience as these are not the mappings that debug_checkwx() is intended to catch. This issue is observed on multiple arm64 platforms, and has been artificially triggered on an x86 platform. Address the race by flushing the queued work before running the arch-defined mark_rodata_ro() which then calls debug_checkwx(). Link: http://lkml.kernel.org/r/1525103946-29526-1-git-send-email-jhugo@codeaurora.org Fixes: e1a58320a38d ("x86/mm: Warn on W^X mappings") Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reported-by: Timur Tabi <timur@codeaurora.org> Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2018, 00:28:45 UTC |
| 4ba281d | Yury Norov | 11 May 2018, 23:01:39 UTC | lib/find_bit_benchmark.c: avoid soft lockup in test_find_first_bit() test_find_first_bit() is intentionally sub-optimal, and may cause soft lockup due to long time of run on some systems. So decrease length of bitmap to traverse to avoid lockup. With the change below, time of test execution doesn't exceed 0.2 seconds on my testing system. Link: http://lkml.kernel.org/r/20180420171949.15710-1-ynorov@caviumnetworks.com Fixes: 4441fca0a27f5 ("lib: test module for find_*_bit() functions") Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2018, 00:28:45 UTC |
| c9cf87e | Dmitry Vyukov | 11 May 2018, 23:01:35 UTC | KASAN: prohibit KASAN+STRUCTLEAK combination Currently STRUCTLEAK inserts initialization out of live scope of variables from KASAN point of view. This leads to KASAN false positive reports. Prohibit this combination for now. Link: http://lkml.kernel.org/r/20180419172451.104700-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dennis Zhou <dennisszhou@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2018, 00:28:45 UTC |
| 1d1c8e5 | Shuah Khan (Samsung OSG) | 11 May 2018, 23:01:32 UTC | MAINTAINERS: update Shuah's email address Update email address in MAINTAINERS file due to IT infrastructure changes at Samsung. Link: http://lkml.kernel.org/r/20180501212815.25911-1-shuah@kernel.org Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 May 2018, 00:28:45 UTC |
| 41e3e10 | Linus Torvalds | 11 May 2018, 16:49:02 UTC | Merge tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two PCI power management regressions from the 4.13 cycle and one cpufreq schedutil governor bug introduced during the 4.12 cycle, drop a stale comment from the schedutil code and fix two mistakes in docs. Specifics: - Restore device_may_wakeup() check in pci_enable_wake() removed inadvertently during the 4.13 cycle to prevent systems from drawing excessive power when suspended or off, among other things (Rafael Wysocki). - Fix pci_dev_run_wake() to properly handle devices that only can signal PME# when in the D3cold power state (Kai Heng Feng). - Fix the schedutil cpufreq governor to avoid using UINT_MAX as the new CPU frequency in some cases due to a missing check (Rafael Wysocki). - Remove a stale comment regarding worker kthreads from the schedutil cpufreq governor (Juri Lelli). - Fix a copy-paste mistake in the intel_pstate driver documentation (Juri Lelli). - Fix a typo in the system sleep states documentation (Jonathan Neuschäfer)" * tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI / PM: Check device_may_wakeup() in pci_enable_wake() PCI / PM: Always check PME wakeup capability for runtime wakeup support cpufreq: schedutil: Avoid using invalid next_freq cpufreq: schedutil: remove stale comment PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph PM: docs: sleep-states: Fix a typo ("includig") | 11 May 2018, 16:49:02 UTC |
| e03dc5d | Linus Torvalds | 11 May 2018, 16:46:14 UTC | Merge tag 'mtd/fixes-for-4.17-rc5' of git://git.infradead.org/linux-mtd Pull mtd fixes from Boris Brezillon: - make nand_soft_waitrdy() wait tWB before polling the status REG - fix BCH write in the the Marvell NAND controller driver - fix wrong picosec to msec conversion in the Marvell NAND controller driver - fix DMA handling in the TI OneNAND controllre driver * tag 'mtd/fixes-for-4.17-rc5' of git://git.infradead.org/linux-mtd: mtd: rawnand: Make sure we wait tWB before polling the STATUS reg mtd: rawnand: marvell: fix command xtype in BCH write hook mtd: rawnand: marvell: pass ms delay to wait_op mtd: onenand: omap2: Disable DMA for HIGHMEM buffers | 11 May 2018, 16:46:14 UTC |
| ca30093 | Linus Torvalds | 11 May 2018, 16:18:02 UTC | Merge tag 'drm-fixes-for-v4.17-rc5' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "nouveau, amdgpu, i915, vc4, omap, exynos and atomic fixes. As last week seemed a bit slow, we got a few more fixes this week. The main stuff is two weeks of fixes for amdgpu, some missing bits of vega12 atom firmware support were added, and some power management fixes. Nouveau got two regression fixes for an DP MST deadlock and a random oops fix. i915 got an LVDS panel timeout fix 2 WARN fixes. exynos fixed a pagefault issue in the mixer driver. vc4 has an oops fix. omap had a bunch of uninit var and error-checking fixes. Two atomic modesetting state fixes. One minor agp cleanup patch" * tag 'drm-fixes-for-v4.17-rc5' of git://people.freedesktop.org/~airlied/linux: (30 commits) drm/amd/pp: Fix performance drop on Fiji drm/nouveau: Fix deadlock in nv50_mstm_register_connector() drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client agp: uninorth: make two functions static drm/amd/pp: Refine the output of pp_power_profile_mode on VI drm/amdgpu: Switch to interruptable wait to recover from ring hang. drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages drm/amd/display: Use kvzalloc for potentially large allocations drm/amd/display: Don't return ddc result and read_bytes in same return value drm/amd/display: Add get_firmware_info_v3_2 for VG12 drm/amd: Add BIOS smu_info v3_3 required struct def. drm/amd/display: Add VG12 ASIC IDs drm/vc4: Fix scaling of uni-planar formats drm/exynos: hdmi: avoid duplicating drm_bridge_attach drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout drm/i915: Adjust eDP's logical vco in a reliable place. drm/bridge/sii8620: add Kconfig dependency on extcon drm/omap: handle alloc failures in omap_connector drm/omap: add missing linefeeds to prints ... | 11 May 2018, 16:18:02 UTC |
| ef05037 | Rafael J. Wysocki | 11 May 2018, 13:17:18 UTC | Merge branches 'pm-pci' and 'pm-docs' * pm-pci: PCI / PM: Check device_may_wakeup() in pci_enable_wake() PCI / PM: Always check PME wakeup capability for runtime wakeup support * pm-docs: PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph PM: docs: sleep-states: Fix a typo ("includig") | 11 May 2018, 13:17:18 UTC |
| 0a0b987 | Jann Horn | 11 May 2018, 00:19:01 UTC | compat: fix 4-byte infoleak via uninitialized struct field Commit 3a4d44b61625 ("ntp: Move adjtimex related compat syscalls to native counterparts") removed the memset() in compat_get_timex(). Since then, the compat adjtimex syscall can invoke do_adjtimex() with an uninitialized ->tai. If do_adjtimex() doesn't write to ->tai (e.g. because the arguments are invalid), compat_put_timex() then copies the uninitialized ->tai field to userspace. Fix it by adding the memset() back. Fixes: 3a4d44b61625 ("ntp: Move adjtimex related compat syscalls to native counterparts") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 May 2018, 00:51:58 UTC |
| 72777fe | Dave Airlie | 11 May 2018, 00:37:07 UTC | Merge branch 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Single amdgpu regression fix * 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amd/pp: Fix performance drop on Fiji | 11 May 2018, 00:37:17 UTC |
| 94d7dbf | Linus Torvalds | 10 May 2018, 18:42:01 UTC | Merge tag 'for-4.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable fix for DM integrity to use kvfree - fix for a 4.17-rc1 change to dm-bufio's buffer alignment - fixes for a few sparse warnings - remove VLA usage in DM mirror target - improve DM thinp Documentation for the "read_only" feature * tag 'for-4.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: update Documentation to clarify when "read_only" is valid dm mirror: remove VLA usage dm: fix some sparse warnings and whitespace in dax methods dm cache background tracker: fix sparse warning dm bufio: fix buffer alignment dm integrity: use kvfree for kvmalloc'd memory | 10 May 2018, 18:42:01 UTC |
| 28700a3 | Mike Snitzer | 10 May 2018, 15:18:49 UTC | dm thin: update Documentation to clarify when "read_only" is valid Due to user confusion, clarify that it doesn't make sense to try to create a thin-pool with "read_only" mode enabled. Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 10 May 2018, 15:18:49 UTC |
| cfcadfa | Rafael J. Wysocki | 08 May 2018, 22:18:32 UTC | PCI / PM: Check device_may_wakeup() in pci_enable_wake() Commit 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code) went too far and dropped the device_may_wakeup() check from pci_enable_wake() which causes wakeup to be enabled during system suspend, hibernation or shutdown for some PCI devices that are not allowed by user space to wake up the system from sleep (or power off). As a result of this, excessive power is drawn by some of the affected systems while in sleep states or off. Restore the device_may_wakeup() check in pci_enable_wake(), but make sure that the PCI bus type's runtime suspend callback will not call device_may_wakeup() which is about system wakeup from sleep and not about device wakeup from runtime suspend. Fixes: 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code) Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: 4.13+ <stable@vger.kernel.org> # 4.13+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> | 10 May 2018, 14:50:26 UTC |
| 7fc6311 | Rex Zhu | 10 May 2018, 11:51:09 UTC | drm/amd/pp: Fix performance drop on Fiji The performance drop if the default TDP more than 256 Watt Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 10 May 2018, 13:25:22 UTC |
| 3057fce | Boris Brezillon | 04 May 2018, 19:24:31 UTC | mtd: rawnand: Make sure we wait tWB before polling the STATUS reg NAND chips require a bit of time to take the NAND operation into account and set the BUSY bit in the STATUS reg. Make sure we don't poll the STATUS reg too early in nand_soft_waitrdy(). Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> | 10 May 2018, 06:40:39 UTC |
| 7c2b134 | Dave Airlie | 10 May 2018, 03:48:52 UTC | Merge branch 'linux-4.17' of git://github.com/skeggsb/linux into drm-fixes Two nouveau crasher/deadlock fixes. * 'linux-4.17' of git://github.com/skeggsb/linux: drm/nouveau: Fix deadlock in nv50_mstm_register_connector() drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client | 10 May 2018, 03:48:52 UTC |
| 352672d | Lyude Paul | 02 May 2018, 23:38:48 UTC | drm/nouveau: Fix deadlock in nv50_mstm_register_connector() Currently; we're grabbing all of the modesetting locks before adding MST connectors to fbdev. This isn't actually necessary, and causes a deadlock as well: ====================================================== WARNING: possible circular locking dependency detected 4.17.0-rc3Lyude-Test+ #1 Tainted: G O ------------------------------------------------------ kworker/1:0/18 is trying to acquire lock: 00000000c832f62d (&helper->lock){+.+.}, at: drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] but task is already holding lock: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (crtc_ww_class_mutex){+.+.}: ww_mutex_lock+0x43/0x80 drm_modeset_lock+0x71/0x130 [drm] drm_helper_probe_single_connector_modes+0x7d/0x6b0 [drm_kms_helper] drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #2 (crtc_ww_class_acquire){+.+.}: drm_helper_probe_single_connector_modes+0x58/0x6b0 [drm_kms_helper] drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&dev->mode_config.mutex){+.+.}: drm_setup_crtcs+0x10c/0xc90 [drm_kms_helper] __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper] nouveau_fbcon_init+0x138/0x1a0 [nouveau] nouveau_drm_load+0x173/0x7e0 [nouveau] drm_dev_register+0x134/0x1c0 [drm] drm_get_pci_dev+0x8e/0x160 [drm] nouveau_drm_probe+0x1a9/0x230 [nouveau] pci_device_probe+0xcd/0x150 driver_probe_device+0x30b/0x480 __driver_attach+0xbc/0xe0 bus_for_each_dev+0x67/0x90 bus_add_driver+0x164/0x260 driver_register+0x57/0xc0 do_one_initcall+0x4d/0x323 do_init_module+0x5b/0x1f8 load_module+0x20e5/0x2ac0 __do_sys_finit_module+0xb7/0xd0 do_syscall_64+0x60/0x1b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&helper->lock){+.+.}: __mutex_lock+0x70/0x9d0 drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] nv50_mstm_register_connector+0x2c/0x50 [nouveau] drm_dp_add_port+0x2f5/0x420 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_add_port+0x33f/0x420 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper] drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper] process_one_work+0x20d/0x650 worker_thread+0x3a/0x390 kthread+0x11e/0x140 ret_from_fork+0x3a/0x50 other info that might help us debug this: Chain exists of: &helper->lock --> crtc_ww_class_acquire --> crtc_ww_class_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(crtc_ww_class_mutex); lock(crtc_ww_class_acquire); lock(crtc_ww_class_mutex); lock(&helper->lock); *** DEADLOCK *** 5 locks held by kworker/1:0/18: #0: 000000004a05cd50 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x187/0x650 #1: 00000000601c11d1 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x187/0x650 #2: 00000000586ca0df (&dev->mode_config.mutex){+.+.}, at: drm_modeset_lock_all+0x3a/0x1b0 [drm] #3: 00000000d3ca0ffa (crtc_ww_class_acquire){+.+.}, at: drm_modeset_lock_all+0x44/0x1b0 [drm] #4: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm] stack backtrace: CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G O 4.17.0-rc3Lyude-Test+ #1 Hardware name: Gateway FX6840/FX6840, BIOS P01-A3 05/17/2010 Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] Call Trace: dump_stack+0x85/0xcb print_circular_bug.isra.38+0x1ce/0x1db __lock_acquire+0x128f/0x1350 ? lock_acquire+0x9f/0x200 ? lock_acquire+0x9f/0x200 ? __ww_mutex_lock.constprop.13+0x8f/0x1000 lock_acquire+0x9f/0x200 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] __mutex_lock+0x70/0x9d0 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] ? ww_mutex_lock+0x43/0x80 ? _cond_resched+0x15/0x30 ? ww_mutex_lock+0x43/0x80 ? drm_modeset_lock+0xb2/0x130 [drm] ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper] nv50_mstm_register_connector+0x2c/0x50 [nouveau] drm_dp_add_port+0x2f5/0x420 [drm_kms_helper] ? mark_held_locks+0x50/0x80 ? kfree+0xcf/0x2a0 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper] ? trace_hardirqs_on_caller+0xed/0x180 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_add_port+0x33f/0x420 [drm_kms_helper] ? nouveau_connector_aux_xfer+0x7c/0xb0 [nouveau] ? find_held_lock+0x2d/0x90 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper] ? __mutex_unlock_slowpath+0x3b/0x280 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper] drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper] drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper] process_one_work+0x20d/0x650 worker_thread+0x3a/0x390 ? process_one_work+0x650/0x650 kthread+0x11e/0x140 ? kthread_create_worker_on_cpu+0x50/0x50 ret_from_fork+0x3a/0x50 Taking example from i915, the only time we need to hold any modesetting locks is when changing the port on the mstc, and in that case we only need to hold the connection mutex. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 10 May 2018, 03:11:52 UTC |
| 0d5a03c | Ben Skeggs | 08 May 2018, 10:39:47 UTC | drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client Potentially responsible for some random OOPSes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org [v4.15+] | 10 May 2018, 03:11:52 UTC |
| 5c0e0b4 | Dave Airlie | 10 May 2018, 01:28:46 UTC | Merge branch 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes A little bigger than normal since this is two weeks of fixes. - Atom firmware table updates for vega12 - Fix fallout from huge page support - Fix up smu7 power profile interface to be consistent with vega - Misc other fixes * 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux: drm/amd/pp: Refine the output of pp_power_profile_mode on VI drm/amdgpu: Switch to interruptable wait to recover from ring hang. drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages drm/amd/display: Use kvzalloc for potentially large allocations drm/amd/display: Don't return ddc result and read_bytes in same return value drm/amd/display: Add get_firmware_info_v3_2 for VG12 drm/amd: Add BIOS smu_info v3_3 required struct def. drm/amd/display: Add VG12 ASIC IDs | 10 May 2018, 01:28:46 UTC |
| 44ef02c | Dave Airlie | 10 May 2018, 01:28:27 UTC | Merge tag 'drm-misc-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes atomic: Clear state pointers on clear (Ville) vc4: Fix oops in dpi disable (Eric) omap: Various error-checking + uninitialized var fixes (Tomi) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> * tag 'drm-misc-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-misc: drm/vc4: Fix scaling of uni-planar formats drm/bridge/sii8620: add Kconfig dependency on extcon drm/omap: handle alloc failures in omap_connector drm/omap: add missing linefeeds to prints drm/omap: handle error if scale coefs are not found drm/omap: check return value from soc_device_match drm/omap: fix possible NULL ref issue in tiler_reserve_2d drm/omap: fix uninitialized ret variable drm/omap: silence unititialized variable warning drm/vc4: Fix oops dereferencing DPI's connector since panel_bridge. drm/atomic: Clean private obj old_state/new_state in drm_atomic_state_default_clear() drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear() | 10 May 2018, 01:28:27 UTC |
| 03a0a3e | Dave Airlie | 10 May 2018, 01:27:47 UTC | Merge tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Increase LVDS panel timeout to 5s to avoid spurious *ERROR* - Fix 2 WARNS: BIOS framebuffer related (FDO #105992) and eDP cdclk mismatch * tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout drm/i915: Adjust eDP's logical vco in a reliable place. | 10 May 2018, 01:27:47 UTC |
| 87bf742 | Dave Airlie | 10 May 2018, 01:27:04 UTC | Merge tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Fixup pagefault issue of mixer driver - it makes sure to check shadow register for interlace scan. - it corrects chroma_addr[1], height and vertical position values. And trivial cleanup - it just removes duplicated drm_bridge_attach. * tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: hdmi: avoid duplicating drm_bridge_attach drm/exynos: mixer: avoid Oops in vp_video_buffer() drm/exynos/mixer: fix synchronization check in interlaced mode | 10 May 2018, 01:27:04 UTC |
| dec60f3 | Mathieu Malaterre | 05 May 2018, 19:54:05 UTC | agp: uninorth: make two functions static Both ‘uninorth_remove_memory’ and ‘null_cache_flush’ can be made static. So make them. Silence the following gcc warning (W=1): drivers/char/agp/uninorth-agp.c:198:5: warning: no previous prototype for ‘uninorth_remove_memory’ [-Wmissing-prototypes] and drivers/char/agp/uninorth-agp.c:473:6: warning: no previous prototype for ‘null_cache_flush’ [-Wmissing-prototypes] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Dave Airlie <airlied@redhat.com> | 10 May 2018, 01:26:08 UTC |
| 008464a | Linus Torvalds | 09 May 2018, 20:49:52 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - quirk for Toshiba Click Mini L9W-B, from Hans de Goede - intel-ish-hid and wacom error handling (device freeing) path fixes from Arvind Yadav - memory corruption fix in intel-ish-hid driver from Hans de Goede - a few new device ID additions to hid-lenovo from Peter Ganzhorn * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: Add RESEND_REPORT_DESCR quirk for Toshiba Click Mini L9W-B HID: intel-ish-hid: use put_device() instead of kfree() HID: intel_ish-hid: Stop using a static local buffer in get_report() HID: intel_ish-hid: Move header size check to inside the loop HID: wacom: Release device resource data obtained by devres_alloc() HID: lenovo: Add support for IBM/Lenovo Scrollpoint mice | 09 May 2018, 20:49:52 UTC |
| 639f790 | Rex Zhu | 07 May 2018, 06:23:04 UTC | drm/amd/pp: Refine the output of pp_power_profile_mode on VI In order to keep consist with Vega, the output format of the pp_power_profile_mode would be <integer><mode name string>< “*” for current profile>:"detail settings" and remove the "CURRENT" mode line. for example: NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL 0 3D_FULL_SCREEN: 0 100 30 0 100 10 1 POWER_SAVING: 10 0 30 - - - 2 VIDEO: - - - 10 16 31 3 VR: 0 11 50 0 100 10 4 COMPUTE: 0 5 30 - - - 5 CUSTOM *: 0 5 30 0 100 10 NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL 0 3D_FULL_SCREEN: 0 100 30 0 100 10 1 POWER_SAVING *: 10 0 30 0 100 10 2 VIDEO: - - - 10 16 31 3 VR: 0 11 50 0 100 10 4 COMPUTE: 0 5 30 - - - 5 CUSTOM: - - - - - - Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 May 2018, 20:17:39 UTC |
| e6a5b9f | Andrey Grodzovsky | 30 April 2018, 14:04:42 UTC | drm/amdgpu: Switch to interruptable wait to recover from ring hang. v2: Use dma_fence_wait instead of dma_fence_wait_timeout(...,MAX_SCHEDULE_TIMEOUT) Avoid printing error message for ERESTARTSYS Originally-by: David Panariti <David.Panariti@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 May 2018, 20:16:51 UTC |
| da29132 | Michel Dänzer | 25 April 2018, 15:32:10 UTC | drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages GFP_TRANSHUGE tries very hard to allocate huge pages, which can result in long delays with high memory pressure. I have observed firefox freezing for up to around a minute due to this while restic was taking a full system backup. Since we don't really need huge pages, use GFP_TRANSHUGE_LIGHT | __GFP_NORETRY instead, in order to fail quickly when there are no huge pages available. Set __GFP_KSWAPD_RECLAIM as well, in order for huge pages to be freed up in the background if necessary. With these changes, I'm no longer seeing freezes during a restic backup. Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 May 2018, 20:16:30 UTC |
| bd4caed | Michel Dänzer | 17 April 2018, 10:25:22 UTC | drm/amd/display: Use kvzalloc for potentially large allocations Allocating up to 32 physically contiguous pages can easily fail (and has failed for me), and isn't necessary anyway. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 May 2018, 20:16:13 UTC |
| 018d82e | Harry Wentland | 24 April 2018, 14:49:20 UTC | drm/amd/display: Don't return ddc result and read_bytes in same return value The two ranges overlap. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 May 2018, 20:15:59 UTC |
| 6e65fb8 | Harry Wentland | 20 April 2018, 14:56:18 UTC | drm/amd/display: Add get_firmware_info_v3_2 for VG12 Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 May 2018, 20:15:45 UTC |
| 60a5205 | Jerry (Fangzhi) Zuo | 05 March 2018, 19:59:57 UTC | drm/amd: Add BIOS smu_info v3_3 required struct def. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 May 2018, 20:15:31 UTC |
| c519113 | Harry Wentland | 20 April 2018, 15:05:07 UTC | drm/amd/display: Add VG12 ASIC IDs Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 May 2018, 20:15:16 UTC |
| 070b963 | Hans de Goede | 03 May 2018, 09:32:33 UTC | HID: i2c-hid: Add RESEND_REPORT_DESCR quirk for Toshiba Click Mini L9W-B The 0457:10fb touchscreen found on the Toshiba Click Mini L9W-B needs to have a report-decriptors command send to it on resume in order for the touchscreen to start generating events again on resume. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 09 May 2018, 11:58:01 UTC |
| 8feaec3 | Kai Heng Feng | 07 May 2018, 06:11:20 UTC | PCI / PM: Always check PME wakeup capability for runtime wakeup support USB controller ASM1042 stops working after commit de3ef1eb1cd0 (PM / core: Drop run_wake flag from struct dev_pm_info). The device in question is not power managed by platform firmware, furthermore, it only supports PME# from D3cold: Capabilities: [78] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot-,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Before commit de3ef1eb1cd0, the device never gets runtime suspended. After that commit, the device gets runtime suspended to D3hot, which can not generate any PME#. usb_hcd_pci_probe() unconditionally calls device_wakeup_enable(), hence device_can_wakeup() in pci_dev_run_wake() always returns true. So pci_dev_run_wake() needs to check PME wakeup capability as its first condition. In addition, change wakeup flag passed to pci_target_state() from false to true, because we want to find the deepest state different from D3cold that the device can still generate PME#. In this case, it's D0 for the device in question. Fixes: de3ef1eb1cd0 (PM / core: Drop run_wake flag from struct dev_pm_info) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: 4.13+ <stable@vger.kernel.org> # 4.13+ Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 09 May 2018, 10:26:42 UTC |
| 9773950 | Rafael J. Wysocki | 09 May 2018, 09:44:56 UTC | cpufreq: schedutil: Avoid using invalid next_freq If the next_freq field of struct sugov_policy is set to UINT_MAX, it shouldn't be used for updating the CPU frequency (this is a special "invalid" value), but after commit b7eaf1aab9f8 (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely) it may be passed as the new frequency to sugov_update_commit() in sugov_update_single(). Fix that by adding an extra check for the special UINT_MAX value of next_freq to sugov_update_single(). Fixes: b7eaf1aab9f8 (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely) Reported-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.12+ <stable@vger.kernel.org> # 4.12+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 09 May 2018, 10:21:17 UTC |
| a744490 | Juri Lelli | 09 May 2018, 08:40:51 UTC | cpufreq: schedutil: remove stale comment After commit 794a56ebd9a57 (sched/cpufreq: Change the worker kthread to SCHED_DEADLINE) schedutil kthreads are "ignored" for a clock frequency selection point of view, so the potential corner case for RT tasks is not possible at all now. Remove the stale comment mentioning it. Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 09 May 2018, 10:20:24 UTC |
| 13610c9 | Juri Lelli | 08 May 2018, 15:12:09 UTC | PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph P-state selection algorithm (powersave or performance) is selected by echoing the desired choice to scaling_governor sysfs attribute and not to scaling_cur_freq (as currently stated). Fix it. Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 09 May 2018, 10:16:44 UTC |
| c72a0de | Jonathan Neuschäfer | 25 April 2018, 10:07:03 UTC | PM: docs: sleep-states: Fix a typo ("includig") Fix a typo in admin-guide/pm/sleep-states.rst. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 09 May 2018, 10:15:13 UTC |
| 9a0e980 | Boris Brezillon | 07 May 2018, 12:13:03 UTC | drm/vc4: Fix scaling of uni-planar formats When using uni-planar formats (like RGB), the scaling parameters are stored in plane 0, not plane 1. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com | 09 May 2018, 07:48:23 UTC |
| 6f2db7d | Peter Rosin | 02 May 2018, 07:40:25 UTC | drm/exynos: hdmi: avoid duplicating drm_bridge_attach drm_bridge_attach takes care of these assignments, so there is no need to open-code them a second time. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Inki Dae <inki.dae@samsung.com> | 09 May 2018, 00:04:57 UTC |
| 036db8b | Linus Torvalds | 08 May 2018, 15:40:17 UTC | Merge branch 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "An earlier commit to add reset control for embedded ahci controllers affected some of the hardware specific drivers and got reverted for now. Other than that, just per-device workarounds and trivial changes" * 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: driver core: add __printf verification to __ata_ehi_pushv_desc ata: fix spelling mistake: "directon" -> "direction" libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs libata: Apply NOLPM quirk for SAMSUNG MZMPC128HBFU-000MV SSD ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI libahci: Allow drivers to override stop_engine Revert "ata: ahci-platform: add reset control support" | 08 May 2018, 15:40:17 UTC |
| 93a0d34 | Linus Torvalds | 08 May 2018, 15:37:17 UTC | Merge tag 'pinctrl-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here are three pin control fixes. The Intel fixes are the most serious and important things I had queued since it affects a large portion of deployed Chromebooks. - Two major fixes for the Intel Cherryview and Sunrisepoint pin controllers, adjusting numberspaces so that they get aligned with various messed-up numbers encoded into the BIOS. - A fix for the Meson driver GPIO pin range" * tag 'pinctrl-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunrisepoint: Align GPIO number space with Windows pinctrl: cherryview: Associate IRQ descriptors to irqdomain pinctrl: meson-axg: fix the range of aobus bank | 08 May 2018, 15:37:17 UTC |
| 89240c6 | Linus Torvalds | 08 May 2018, 15:35:12 UTC | Merge tag 'gpio-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Sorry for lagging behind on sending the first batch of GPIO fixes for this cycle. Just too busy conferencing and the weather was too nice. Here it is anyway: some real important polishing on the error path facing userspace (tagged for stable as well) and some normal driver fixes. - Fix proper IRQ unmasking in the Aspeed driver. - Do not free unrequested descriptors on the errorpath when creating line handles from the userspace chardev requested GPIO lines. - Also fix the errorpath in the linehandle creation function. - Fix the get/set multiple GPIO lines for a few of the funky industrial GPIO cards on the ISA bus" * tag 'gpio-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pcie-idio-24: Fix off-by-one error in get_multiple loop gpio: pcie-idio-24: Fix port memory offset for get_multiple/set_multiple callbacks gpio: pci-idio-16: Fix port memory offset for get_multiple callback gpio: fix error path in lineevent_create gpioib: do not free unrequested descriptors gpio: fix aspeed_gpio unmask irq | 08 May 2018, 15:35:12 UTC |
| e8f48f9 | Florent Flament | 19 April 2018, 16:07:00 UTC | drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` in kernel log at boot time. Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power on its screen during Intel i915 DRM initialization. This currently results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` message appearing in the kernel log during boot time and when stopping the machine. This change increases the timeout of the `intel_enable_lvds` function from 1 to 5 seconds, letting enough time for the Satellite 930 LCD screen to power on, and suppressing the error message from the kernel log. This patch has been successfully tested on Linux 4.14 running on a Toshiba Satellite Z930. [vsyrjala: bump the timeout from 2 to 5 seconds to match the DP code and properly cover the max hw timeout of ~4 seconds, and drop the comment about the specific machine since this is not a particulary surprising issue, nor specific to that one machine] Signed-off-by: Florent Flament <contact@florentflament.com> Cc: stable@vger.kernel.org Cc: Pavel Petrovic <ppetrovic@acm.org> Cc: Sérgio M. Basto <sergio@serjux.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414 References: https://bugzilla.kernel.org/show_bug.cgi?id=57591 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 280b54ade5914d3b4abe4f0ebe083ddbd4603246) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> | 08 May 2018, 12:56:13 UTC |
| 660d88e | Ville Syrjälä | 26 April 2018, 16:30:15 UTC | drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout During state readout we first read out the pipe src size, store that information in the user mode h/vdisplay, but later on we overwrite that with the actual crtc timings. That makes our read out crtc state inconsistent with itself when the BIOS has enabled the panel fitter to scale the pipe contents. Let's preserve the pipe src size based information in the user mode to make things consistent again. This fixes a problem introduced by commit a2936e3d9a9c ("drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle") where the inconsistent state is now leading the plane clipping code to report a failure on account the plane dst coordinates not matching the user mode size. Previously we did the plane clipping based on the pipe src size instead and thus never noticed the inconsistency. The failure manifests as a WARN: [ 0.762117] [drm:intel_dump_pipe_config [i915]] requested mode: [ 0.762142] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72143 1366 1414 1446 1526 768 771 777 784 0x40 0xa ... [ 0.762327] [drm:intel_dump_pipe_config [i915]] port clock: 72143, pipe src size: 1024x768, pixel rate 72143 ... [ 0.764666] [drm:drm_atomic_helper_check_plane_state [drm_kms_helper]] Plane must cover entire CRTC [ 0.764690] [drm:drm_rect_debug_print [drm]] dst: 1024x768+0+0 [ 0.764711] [drm:drm_rect_debug_print [drm]] clip: 1366x768+0+0 [ 0.764713] ------------[ cut here ]------------ [ 0.764714] Could not determine valid watermarks for inherited state [ 0.764792] WARNING: CPU: 4 PID: 159 at drivers/gpu/drm/i915/intel_display.c:14584 intel_modeset_init+0x3ce/0x19d0 [i915] ... Cc: FadeMind <fademind@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: FadeMind <fademind@gmail.com> Reported-by: Dave Jones <davej@codemonkey.org.uk> Tested-by: Dave Jones <davej@codemonkey.org.uk> References: https://lists.freedesktop.org/archives/intel-gfx/2018-April/163186.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105992 Fixes: a2936e3d9a9c ("drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180426163015.14232-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: FadeMind <fademind@gmail.com> (cherry picked from commit bd4cd03c81010dcd4e6f0e02e4c15f44aefe12d1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> | 08 May 2018, 12:56:13 UTC |
| 9d21955 | Rodrigo Vivi | 02 May 2018, 17:52:55 UTC | drm/i915: Adjust eDP's logical vco in a reliable place. On intel_dp_compute_config() we were calculating the needed vco for eDP on gen9 and we stashing it in intel_atomic_state.cdclk.logical.vco However few moments later on intel_modeset_checks() we fully replace entire intel_atomic_state.cdclk.logical with dev_priv->cdclk.logical fully overwriting the logical desired vco for eDP on gen9. So, with wrong VCO value we end up with wrong desired cdclk, but also it will raise a lot of WARNs: On gen9, when we read CDCLK_CTL to verify if we configured properly the desired frequency the CD Frequency Select bits [27:26] == 10b can mean 337.5 or 308.57 MHz depending on the VCO. So if we have wrong VCO value stashed we will believe the frequency selection didn't stick and start to raise WARNs of cdclk mismatch. [ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 42.897269] cdclk state doesn't match! [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915] [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915] [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 v2: Move the entire eDP's vco logical adjustment to inside the skl_modeset_calc_cdclk as suggested by Ville. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: bb0f4aab0e76 ("drm/i915: Track full cdclk state for the logical and actual cdclk frequencies") Cc: <stable@vger.kernel.org> # v4.12+ Link: https://patchwork.freedesktop.org/patch/msgid/20180502175255.5344-1-rodrigo.vivi@intel.com (cherry picked from commit 3297234a05ab1e90091b0574db4c397ef0e90d5f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> | 08 May 2018, 12:56:12 UTC |
| f142f08 | Florian La Roche | 06 May 2018, 17:34:07 UTC | Fix typo in comment. CONFIG_PRREMPT -> CONFIG_PREEMPT Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 07 May 2018, 15:41:46 UTC |
| 76787cf | Linus Torvalds | 07 May 2018, 15:33:29 UTC | Merge tag 'devicetree-fixes-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - fix path to display timing binding - fix some typos in interrupt-names and clock-names - fix a resource leak on overlay removal - add missing documentation for R8A77965 DMA, serial, and net - cleanup sunxi pinctrl description - add Kieback & Peter GmbH vendor prefix * tag 'devicetree-fixes-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: panel: lvds: Fix path to display timing bindings dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/ dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/ of: overlay: Stop leaking resources on overlay removal dtc: checks: drop warning for missing PCI bridge bus-range dt-bindings: dmaengine: rcar-dmac: document R8A77965 support dt-bindings: serial: sh-sci: Add support for r8a77965 (H)SCIF dt-bindings: net: ravb: Add support for r8a77965 SoC dt-bindings: pinctrl: sunxi: Fix reference to driver doc: Add vendor prefix for Kieback & Peter GmbH | 07 May 2018, 15:33:29 UTC |
| 0d74d87 | Mathieu Malaterre | 05 May 2018, 20:00:37 UTC | driver core: add __printf verification to __ata_ehi_pushv_desc __printf is useful to verify format and arguments. Remove the following warning (with W=1): drivers/ata/libata-eh.c:183:10: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Tejun Heo <tj@kernel.org> | 07 May 2018, 15:32:20 UTC |
| 7a10967 | Andrzej Hajda | 09 April 2018, 06:27:08 UTC | drm/bridge/sii8620: add Kconfig dependency on extcon The driver can work with or without extcon framework, but if extcon is build as module, sii8620 should be build as module as well. Fixes: 688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180409062708.4326-1-a.hajda@samsung.com Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:12 UTC |
| 47aaaec | Tomi Valkeinen | 02 May 2018, 09:11:59 UTC | drm/omap: handle alloc failures in omap_connector Handle memory allocation failures in omap_connector to avoid NULL derefs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-5-tomi.valkeinen@ti.com Reviewed-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:12 UTC |
| 7f26eee | Tomi Valkeinen | 02 May 2018, 09:11:58 UTC | drm/omap: add missing linefeeds to prints A bunch of debug and error prints are missing linefeeds. Add those. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-4-tomi.valkeinen@ti.com Reviewed-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:12 UTC |
| e1cdab6 | Tomi Valkeinen | 02 May 2018, 09:11:57 UTC | drm/omap: handle error if scale coefs are not found If get_scale_coef functions fail, they return NULL, but we never check the return value and could do a NULL deref. This should not happen as we ought to validate the amount of scaling already earlier, but to be safe, add the necessary check. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-3-tomi.valkeinen@ti.com Reviewed-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:12 UTC |
| 4d6cb5e | Tomi Valkeinen | 02 May 2018, 09:11:56 UTC | drm/omap: check return value from soc_device_match soc_device_match() can return NULL, so add a check and fail if soc_device_match() fails. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-2-tomi.valkeinen@ti.com Reviewed-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:11 UTC |
| 6a0f0c5 | Tomi Valkeinen | 29 March 2018, 10:40:37 UTC | drm/omap: fix possible NULL ref issue in tiler_reserve_2d tiler_reserve_2d allocates memory but does not check if it got the memory. Add the check and return ENOMEM on failure. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180329104038.29154-2-tomi.valkeinen@ti.com Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:11 UTC |
| 77eeac2 | Tomi Valkeinen | 29 March 2018, 10:40:36 UTC | drm/omap: fix uninitialized ret variable audio_config function for both HDMI4 and HDMI5 return uninitialized value as the error code if the display is not currently enabled. For some reason this has not caused any issues. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180329104038.29154-1-tomi.valkeinen@ti.com Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:11 UTC |
| 4a9fbfc | Dan Carpenter | 18 April 2018, 14:29:37 UTC | drm/omap: silence unititialized variable warning Smatch complains that "area_free" could be used without being initialized. This code is several years old and premusably works fine so this can't be a very serious bug. But it's easy enough to silence the warning. If "area_free" is false at the end of the function then we return -ENOMEM. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418142937.GA13828@mwanda Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:11 UTC |
| 164c241 | Eric Anholt | 09 March 2018, 23:32:56 UTC | drm/vc4: Fix oops dereferencing DPI's connector since panel_bridge. In the cleanup, I didn't notice that we needed to dereference the connector for the bus_format. Fix the regression by looking up the first (and only) connector attached to us, and assume that its bus_format is what we want. Some day it would be good to have that part of display_info attached to the bridge, instead. v2: Fix stray whitespace change Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 7b1298e05310 ("drm/vc4: Switch DPI to using the panel-bridge helper.") Link: https://patchwork.freedesktop.org/patch/msgid/20180309233256.1667-1-eric@anholt.net Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:11 UTC |
| b5cb2e5 | Ville Syrjälä | 02 May 2018, 18:32:47 UTC | drm/atomic: Clean private obj old_state/new_state in drm_atomic_state_default_clear() Clear the old_state and new_state pointers for private objects in drm_atomic_state_default_clear(). We don't actually have functions to get the new/old state for private objects so getting access to the potentially stale pointers requires a bit more manual labour than for other object types. But let's clear the pointers for private objects as well, if only to avoid future surprises when someone decides to add the functions to get at them. v2: Split private objs to a separate patch (Daniel) Cc: <stable@vger.kernel.org> # v4.14+ Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Abhay Kumar <abhay.kumar@intel.com> Fixes: a4370c777406 (drm/atomic: Make private objs proper objects) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502183247.5746-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:11 UTC |
| f0b408e | Ville Syrjälä | 02 May 2018, 18:32:47 UTC | drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear() Clear the old_state and new_state pointers for every object in drm_atomic_state_default_clear(). Otherwise drm_atomic_get_{new,old}_*_state() will hand out stale pointers to anyone who hasn't first confirmed that the object is in fact part of the current atomic transcation, if they are called after we've done the ww backoff dance while hanging on to the same drm_atomic_state. For example, handle_conflicting_encoders() looks like it could hit this since it iterates the full connector list and just calls drm_atomic_get_new_connector_state() for each. And I believe we have now witnessed this happening at least once in i915 check_digital_port_conflicts(). Commit 8b69449d2663 ("drm/i915: Remove last references to drm_atomic_get_existing* macros") changed the safe drm_atomic_get_existing_connector_state() to the unsafe drm_atomic_get_new_connector_state(), which opened the doors for this particular bug there as well. v2: Split private objs out to a separate patch (Daniel) Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Abhay Kumar <abhay.kumar@intel.com> Fixes: 581e49fe6b41 ("drm/atomic: Add new iterators over all state, v3.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502183247.5746-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> | 07 May 2018, 14:19:11 UTC |
| 75bc37f | Linus Torvalds | 07 May 2018, 02:57:38 UTC | Linux 4.17-rc4 | 07 May 2018, 02:57:38 UTC |
| 701e39d | Linus Torvalds | 06 May 2018, 15:46:29 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pll KVM fixes from Radim Krčmář: "ARM: - Fix proxying of GICv2 CPU interface accesses - Fix crash when switching to BE - Track source vcpu git GICv2 SGIs - Fix an outdated bit of documentation x86: - Speed up injection of expired timers (for stable)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: remove APIC Timer periodic/oneshot spikes arm64: vgic-v2: Fix proxying of cpuif access KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance KVM: arm64: Fix order of vcpu_write_sys_reg() arguments KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGI | 06 May 2018, 15:46:29 UTC |
| 772d4f8 | Linus Torvalds | 06 May 2018, 15:42:24 UTC | Merge tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - fix a compile warning in the AMD IOMMU driver with irq remapping disabled - fix for VT-d interrupt remapping and invalidation size (caused a BUG_ON when trying to invalidate more than 4GB) - build fix and a regression fix for broken graphics with old DTS for the rockchip iommu driver - a revert in the PCI window reservation code which fixes a regression with VFIO. * tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: rockchip: fix building without CONFIG_OF iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb() iommu/vt-d: fix shift-out-of-bounds in bug checking iommu/dma: Move PCI window region reservation back into dma specific path. iommu/rockchip: Make clock handling optional iommu/amd: Hide unused iommu_table_lock iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte() | 06 May 2018, 15:42:24 UTC |
| 9c48eb6 | Linus Torvalds | 06 May 2018, 15:37:24 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "Unbreak the CPUID CPUID_8000_0008_EBX reload which got dropped when the evaluation of physical and virtual bits which uses the same CPUID leaf was moved out of get_cpu_cap()" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Restore CPUID_8000_0008_EBX reload | 06 May 2018, 15:37:24 UTC |
| fe282c6 | Linus Torvalds | 06 May 2018, 15:35:23 UTC | Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull clocksource fixes from Thomas Gleixner: "The recent addition of the early TSC clocksource breaks on machines which have an unstable TSC because in case that TSC is disabled, then the clocksource selection logic falls back to the early TSC which is obviously bogus. That also unearthed a few robustness issues in the clocksource derating code which are addressed as well" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Rework stale comment clocksource: Consistent de-rate when marking unstable x86/tsc: Fix mark_tsc_unstable() clocksource: Initialize cs->wd_list clocksource: Allow clocksource_mark_unstable() on unregistered clocksources x86/tsc: Always unregister clocksource_tsc_early | 06 May 2018, 15:35:23 UTC |
| 03b5f0c | Linus Torvalds | 06 May 2018, 15:34:06 UTC | Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single fix to prevent false positives in the spurious interrupt detector when more than a single demultiplex register is evaluated in the Qualcom irq combiner driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom: Fix check for spurious interrupts | 06 May 2018, 15:34:06 UTC |
| ee946c3 | Linus Torvalds | 06 May 2018, 03:30:58 UTC | Merge tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: - We missed a case in the Dell config dependencies resulting in a possible bad configuration, resolve it by giving up on trying to keep DELL_LAPTOP visible in the menu and make it depend on DELL_SMBIOS. - Fix a null pointer dereference at module unload for the asus-wireless driver. * tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: Kconfig: Fix dell-laptop dependency chain. platform/x86: asus-wireless: Fix NULL pointer dereference | 06 May 2018, 03:30:58 UTC |
| 8e95cb3 | Linus Torvalds | 06 May 2018, 03:28:08 UTC | Merge tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB driver fixes for 4.17-rc4. The majority of them are some USB gadget fixes that missed my last pull request. The "largest" patch in here is a fix for the old visor driver that syzbot found 6 months or so ago and I finally remembered to fix it. All of these have been in linux-next with no reported issues" * tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: host: ehci: Use dma_pool_zalloc()" usb: typec: tps6598x: handle block reads separately with plain-I2C adapters usb: typec: tcpm: Release the role mux when exiting USB: Accept bulk endpoints with 1024-byte maxpacket xhci: Fix use-after-free in xhci_free_virt_device USB: serial: visor: handle potential invalid device configuration USB: serial: option: adding support for ublox R410M usb: musb: trace: fix NULL pointer dereference in musb_g_tx() usb: musb: host: fix potential NULL pointer dereference usb: gadget: composite Allow for larger configuration descriptors usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be static usb: dwc2: pci: Fix error return code in dwc2_pci_probe() usb: dwc2: WA for Full speed ISOC IN in DDMA mode. usb: dwc2: dwc2_vbus_supply_init: fix error check usb: gadget: f_phonet: fix pn_net_xmit()'s return type | 06 May 2018, 03:28:08 UTC |
| ecf08da | Anthoine Bourgeois | 29 April 2018, 22:05:58 UTC | KVM: x86: remove APIC Timer periodic/oneshot spikes Since the commit "8003c9ae204e: add APIC Timer periodic/oneshot mode VMX preemption timer support", a Windows 10 guest has some erratic timer spikes. Here the results on a 150000 times 1ms timer without any load: Before 8003c9ae204e | After 8003c9ae204e Max 1834us | 86000us Mean 1100us | 1021us Deviation 59us | 149us Here the results on a 150000 times 1ms timer with a cpu-z stress test: Before 8003c9ae204e | After 8003c9ae204e Max 32000us | 140000us Mean 1006us | 1997us Deviation 140us | 11095us The root cause of the problem is starting hrtimer with an expiry time already in the past can take more than 20 milliseconds to trigger the timer function. It can be solved by forward such past timers immediately, rather than submitting them to hrtimer_start(). In case the timer is periodic, update the target expiration and call hrtimer_start with it. v2: Check if the tsc deadline is already expired. Thank you Mika. v3: Execute the past timers immediately rather than submitting them to hrtimer_start(). v4: Rearm the periodic timer with advance_periodic_target_expiration() a simpler version of set_target_expiration(). Thank you Paolo. Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com> 8003c9ae204e ("KVM: LAPIC: add APIC Timer periodic/oneshot mode VMX preemption timer support") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> | 05 May 2018, 21:09:39 UTC |
| f3351c6 | Radim Krčmář | 05 May 2018, 21:05:31 UTC | Merge tag 'kvmarm-fixes-for-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/arm fixes for 4.17, take #2 - Fix proxying of GICv2 CPU interface accesses - Fix crash when switching to BE - Track source vcpu git GICv2 SGIs - Fix an outdated bit of documentation | 05 May 2018, 21:05:31 UTC |
| c1c0741 | Linus Torvalds | 05 May 2018, 07:15:25 UTC | Merge tag 'kbuild-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - remove state comment in modpost - extend MAINTAINERS entry to cover modpost and more makefiles - fix missed building of SANCOV gcc-plugin - replace left-over 'bison' with $(YACC) - display short log when generating parer of genksyms * tag 'kbuild-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: genksyms: fix typo in parse.tab.{c,h} generation rules kbuild: replace hardcoded bison in cmd_bison_h with $(YACC) gcc-plugins: fix build condition of SANCOV plugin MAINTAINERS: Update Kbuild entry with a few paths modpost: delete stale comment | 05 May 2018, 07:15:25 UTC |
| 4a7a772 | Linus Torvalds | 05 May 2018, 07:12:06 UTC | Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes froom Stephen Boyd: "A handful of fixes for the stm32mp1 clk driver came in during the merge window for the driver that got merged in the merge window. Plus a warning fix for unused PM ops and a couple fixes for the meson clk driver clk names that went unnoticed with the regmap rework. There's also another fix in here for the mux rounding flag which wasn't doing what it said it did, but now it does" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: meson: meson8b: fix meson8b_cpu_clk parent clock name clk: meson: meson8b: fix meson8b_fclk_div3_div clock name clk: meson: drop meson_aoclk_gate_regmap_ops clk: meson: honor CLK_MUX_ROUND_CLOSEST in clk_regmap clk: honor CLK_MUX_ROUND_CLOSEST in generic clk mux clk: cs2000: mark resume function as __maybe_unused clk: stm32mp1: remove ck_apb_dbg clock clk: stm32mp1: set stgen_k clock as critical clk: stm32mp1: add missing tzc2 clock clk: stm32mp1: fix SAI3 & SAI4 clocks clk: stm32mp1: remove unused dfsdm_src[] const clk: stm32mp1: add missing static | 05 May 2018, 07:12:06 UTC |
| f933147 | Linus Torvalds | 05 May 2018, 07:07:43 UTC | Merge tag 'rproc-v4.17-1' of git://github.com/andersson/remoteproc Pull remoteproc and rpmsg fixes from Bjorn Andersson: - fix screw-up when reversing boolean for rproc_stop() - add missing OF node refcounting dereferences - add missing MODULE_ALIAS in rpmsg_char * tag 'rproc-v4.17-1' of git://github.com/andersson/remoteproc: rpmsg: added MODULE_ALIAS for rpmsg_char remoteproc: qcom: Fix potential device node leaks remoteproc: fix crashed parameter logic on stop call | 05 May 2018, 07:07:43 UTC |
| c12fd0f | Linus Torvalds | 05 May 2018, 07:05:12 UTC | Merge tag 'drm-fixes-for-v4.17-rc4' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "vmwgfx, i915, vc4, vga dac fixes. This seems eerily quiet, so I expect it will explode next week or something. One i915 model firmware, two vmwgfx fixes, one vc4 fix and one bridge leak fix" * tag 'drm-fixes-for-v4.17-rc4' of git://people.freedesktop.org/~airlied/linux: drm/bridge: vga-dac: Fix edid memory leak drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced drm/i915/glk: Add MODULE_FIRMWARE for Geminilake drm/vmwgfx: Fix a buffer object leak drm/vmwgfx: Clean up fbdev modeset locking | 05 May 2018, 07:05:12 UTC |
| 4b29390 | Linus Torvalds | 05 May 2018, 06:57:28 UTC | Merge tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Some of the files in the tracing directory show file mode 0444 when they are writable by root. To fix the confusion, they should be 0644. Note, either case root can still write to them. Zhengyuan asked why I never applied that patch (the first one is from 2014!). I simply forgot about it. /me lowers head in shame" * tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix the file mode of stack tracer ftrace: Have set_graph_* files have normal file modes | 05 May 2018, 06:57:28 UTC |
| eb4f959 | Linus Torvalds | 05 May 2018, 06:51:10 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Doug Ledford: "This is our first pull request of the rc cycle. It's not that it's been overly quiet, we were just waiting on a few things before sending this off. For instance, the 6 patch series from Intel for the hfi1 driver had actually been pulled in on Tuesday for a Wednesday pull request, only to have Jason notice something I missed, so we held off for some testing, and then on Thursday had to respin the series because the very first patch needed a minor fix (unnecessary cast is all). There is a sizable hns patch series in here, as well as a reasonably largish hfi1 patch series, then all of the lines of uapi updates are just the change to the new official Linux-OpenIB SPDX tag (a bunch of our files had what amounts to a BSD-2-Clause + MIT Warranty statement as their license as a result of the initial code submission years ago, and the SPDX folks decided it was unique enough to warrant a unique tag), then the typical mlx4 and mlx5 updates, and finally some cxgb4 and core/cache/cma updates to round out the bunch. None of it was overly large by itself, but in the 2 1/2 weeks we've been collecting patches, it has added up :-/. As best I can tell, it's been through 0day (I got a notice about my last for-next push, but not for my for-rc push, but Jason seems to think that failure messages are prioritized and success messages not so much). It's also been through linux-next. And yes, we did notice in the context portion of the CMA query gid fix patch that there is a dubious BUG_ON() in the code, and have plans to audit our BUG_ON usage and remove it anywhere we can. Summary: - Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off) - SPDX license tag cleanups (new tag Linux-OpenIB) - RoCE GID fixes related to default GIDs - Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch), mlx4, mlx5, and hfi1 (medium batch)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (52 commits) RDMA/cma: Do not query GID during QP state transition to RTR IB/mlx4: Fix integer overflow when calculating optimal MTT size IB/hfi1: Fix memory leak in exception path in get_irq_affinity() IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used IB/hfi1: Fix loss of BECN with AHG IB/hfi1 Use correct type for num_user_context IB/hfi1: Fix handling of FECN marked multicast packet IB/core: Make ib_mad_client_id atomic iw_cxgb4: Atomically flush per QP HW CQEs IB/uverbs: Fix kernel crash during MR deregistration flow IB/uverbs: Prevent reregistration of DM_MR to regular MR RDMA/mlx4: Add missed RSS hash inner header flag RDMA/hns: Fix a couple misspellings RDMA/hns: Submit bad wr RDMA/hns: Update assignment method for owner field of send wqe RDMA/hns: Adjust the order of cleanup hem table RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set RDMA/hns: Remove some unnecessary attr_mask judgement RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set ... | 05 May 2018, 06:51:10 UTC |
| 2f50037 | Linus Torvalds | 05 May 2018, 06:41:44 UTC | Merge tag 'for-linus-20180504' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "A collection of fixes that should to into this release. This contains: - Set of bcache fixes from Coly, fixing regression in patches that went into this series. - Set of NVMe fixes by way of Keith. - Set of bdi related fixes, one from Jan and two from Tetsuo Handa, fixing various issues around device addition/removal. - Two block inflight fixes from Omar, fixing issues around the transition to using tags for blk-mq inflight accounting that we did a few releases ago" * tag 'for-linus-20180504' of git://git.kernel.dk/linux-block: bdi: Fix oops in wb_workfn() nvmet: switch loopback target state to connecting when resetting nvme/multipath: Fix multipath disabled naming collisions nvme/multipath: Disable runtime writable enabling parameter nvme: Set integrity flag for user passthrough commands nvme: fix potential memory leak in option parsing bdi: Fix use after free bug in debugfs_remove() bdi: wake up concurrent wb_shutdown() callers. bcache: use pr_info() to inform duplicated CACHE_SET_IO_DISABLE set bcache: set dc->io_disable to true in conditional_stop_bcache_device() bcache: add wait_for_kthread_stop() in bch_allocator_thread() bcache: count backing device I/O error for writeback I/O bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error() bcache: store disk name in struct cache and struct cached_dev blk-mq: fix sysfs inflight counter blk-mq: count allocated but not started requests in iostats inflight | 05 May 2018, 06:41:44 UTC |
| 2e171ff | Linus Torvalds | 05 May 2018, 06:36:50 UTC | Merge tag 'xfs-4.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fixes from Darrick Wong: "I've got one more bug fix for xfs for 4.17-rc4, which caps the amount of data we try to handle in one dedupe request so that userspace can't livelock the kernel. This series has been run through a full xfstests run during the week and through a quick xfstests run against this morning's master, with no ajor failures reported. Summary: - Cap the maximum length of a deduplication request at MAX_RW_COUNT/2 to avoid kernel livelock due to excessively large IO requests" * tag 'xfs-4.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: cap the length of deduplication requests | 05 May 2018, 06:36:50 UTC |
| 4148d38 | Linus Torvalds | 05 May 2018, 06:32:18 UTC | Merge tag 'for-4.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Two regression fixes and one fix for stable" * tag 'for-4.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: send, fix missing truncate for inode with prealloc extent past eof btrfs: Take trans lock before access running trans in check_delayed_ref btrfs: Fix wrong first_key parameter in replace_path | 05 May 2018, 06:32:18 UTC |
| 0da7e43 | Mauro Rossi | 24 April 2018, 11:08:18 UTC | genksyms: fix typo in parse.tab.{c,h} generation rules 'quet' is replaced by 'quiet' in scripts/genksyms/Makefile Signed-off-by: Mauro Rossi <issor.oruam@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 05 May 2018, 01:24:53 UTC |
| d59fbbd | Masahiro Yamada | 24 April 2018, 11:07:13 UTC | kbuild: replace hardcoded bison in cmd_bison_h with $(YACC) Commit 73a4f6dbe70a ("kbuild: add LEX and YACC variables") missed to update cmd_bison_h somehow. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 05 May 2018, 01:24:52 UTC |
| 642ef99 | Masahiro Yamada | 13 April 2018, 05:06:10 UTC | gcc-plugins: fix build condition of SANCOV plugin Since commit d677a4d60193 ("Makefile: support flag -fsanitizer-coverage=trace-cmp"), you miss to build the SANCOV plugin under some circumstances. CONFIG_KCOV=y CONFIG_KCOV_ENABLE_COMPARISONS=y Your compiler does not support -fsanitize-coverage=trace-pc Your compiler does not support -fsanitize-coverage=trace-cmp Under this condition, $(CFLAGS_KCOV) is not empty but contains a space, so the following ifeq-conditional is false. ifeq ($(CFLAGS_KCOV),) Then, scripts/Makefile.gcc-plugins misses to add sancov_plugin.so to gcc-plugin-y while the SANCOV plugin is necessary as an alternative means. Fixes: d677a4d60193 ("Makefile: support flag -fsanitizer-coverage=trace-cmp") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> | 05 May 2018, 01:24:52 UTC |
| 1cd4023 | Rasmus Villemoes | 22 March 2018, 20:58:27 UTC | MAINTAINERS: Update Kbuild entry with a few paths I managed to send some modpost patches to old addresses of both Masahiro and Michal, and omitted linux-kbuild from cc, because my tried and trusted scripts/get_maintainer wrapper failed me. Add the modpost directory to the MAINTAINERS entry, and while at it make the Makefile glob match scripts/Makefile itself, and add one matching the Kbuild.include file as well. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 05 May 2018, 01:24:51 UTC |
| 6844dc4 | Greg Kroah-Hartman | 04 May 2018, 21:38:32 UTC | Merge tag 'usb-serial-4.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.17-rc4 Here's a fix for a long-standing issue in the visor driver, which could have security implications. Included is also a new modem device id. Both commits have been in linux-next for a couple of days with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> | 04 May 2018, 21:38:32 UTC |
| 43b78f1 | Greg Kroah-Hartman | 04 May 2018, 21:35:12 UTC | Revert "usb: host: ehci: Use dma_pool_zalloc()" This reverts commit 22072e83ebd510fb6a090aef9d65ccfda9b1e7e4 as it is broken. Alan writes: What you can't see just from reading the patch is that in both cases (ehci->itd_pool and ehci->sitd_pool) there are two allocation paths -- the two branches of an "if" statement -- and only one of the paths calls dma_pool_[z]alloc. However, the memset is needed for both paths, and so it can't be eliminated. Given that it must be present, there's no advantage to calling dma_pool_zalloc rather than dma_pool_alloc. Reported-by: Erick Cafferata <erick@cafferata.me> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 04 May 2018, 21:35:12 UTC |
| 7fe3fa3 | Mario Limonciello | 20 April 2018, 17:42:11 UTC | platform/x86: Kconfig: Fix dell-laptop dependency chain. As reported by Randy Dunlap: >> WARNING: unmet direct dependencies detected for DELL_SMBIOS >> Depends on [m]: X86 [=y] && X86_PLATFORM_DEVICES [=y] >> && (DCDBAS [=m] || >> DCDBAS [=m]=n) && (ACPI_WMI [=n] || ACPI_WMI [=n]=n) >> Selected by [y]: >> - DELL_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] >> && DMI [=y] >> && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] || >> ACPI_VIDEO [=n]=n) >> && (RFKILL [=n] || RFKILL [=n]=n) && SERIO_I8042 [=y] >> Right now it's possible to set dell laptop to compile in but this causes dell-smbios to compile in which breaks if dcdbas is a module. Dell laptop shouldn't select dell-smbios anymore, but depend on it. Fixes: 32d7b19bad96 (platform/x86: dell-smbios: Resolve dependency error on DCDBAS) Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> | 04 May 2018, 20:20:14 UTC |
| 9f0a93d | João Paulo Rechi Vita | 19 April 2018, 14:04:34 UTC | platform/x86: asus-wireless: Fix NULL pointer dereference When the module is removed the led workqueue is destroyed in the remove callback, before the led device is unregistered from the led subsystem. This leads to a NULL pointer derefence when the led device is unregistered automatically later as part of the module removal cleanup. Bellow is the backtrace showing the problem. BUG: unable to handle kernel NULL pointer dereference at (null) IP: __queue_work+0x8c/0x410 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Modules linked in: ccm edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 joydev crypto_simd asus_nb_wmi glue_helper uvcvideo snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel asus_wmi snd_hda_codec cryptd snd_hda_core sparse_keymap videobuf2_vmalloc arc4 videobuf2_memops snd_hwdep input_leds videobuf2_v4l2 ath9k psmouse videobuf2_core videodev ath9k_common snd_pcm ath9k_hw media fam15h_power ath k10temp snd_timer mac80211 i2c_piix4 r8169 mii mac_hid cfg80211 asus_wireless(-) snd soundcore wmi shpchp 8250_dw ip_tables x_tables amdkfd amd_iommu_v2 amdgpu radeon chash i2c_algo_bit drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ahci ttm libahci drm video CPU: 3 PID: 2177 Comm: rmmod Not tainted 4.15.0-5-generic #6+dev94.b4287e5bem1-Endless Hardware name: ASUSTeK COMPUTER INC. X555DG/X555DG, BIOS 5.011 05/05/2015 RIP: 0010:__queue_work+0x8c/0x410 RSP: 0018:ffffbe8cc249fcd8 EFLAGS: 00010086 RAX: ffff992ac6810800 RBX: 0000000000000000 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff992ac6400e18 RBP: ffffbe8cc249fd18 R08: ffff992ac6400db0 R09: 0000000000000000 R10: 0000000000000040 R11: ffff992ac6400dd8 R12: 0000000000002000 R13: ffff992abd762e00 R14: ffff992abd763e38 R15: 000000000001ebe0 FS: 00007f318203e700(0000) GS:ffff992aced80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001c720e000 CR4: 00000000001406e0 Call Trace: queue_work_on+0x38/0x40 led_state_set+0x2c/0x40 [asus_wireless] led_set_brightness_nopm+0x14/0x40 led_set_brightness+0x37/0x60 led_trigger_set+0xfc/0x1d0 led_classdev_unregister+0x32/0xd0 devm_led_classdev_release+0x11/0x20 release_nodes+0x109/0x1f0 devres_release_all+0x3c/0x50 device_release_driver_internal+0x16d/0x220 driver_detach+0x3f/0x80 bus_remove_driver+0x55/0xd0 driver_unregister+0x2c/0x40 acpi_bus_unregister_driver+0x15/0x20 asus_wireless_driver_exit+0x10/0xb7c [asus_wireless] SyS_delete_module+0x1da/0x2b0 entry_SYSCALL_64_fastpath+0x24/0x87 RIP: 0033:0x7f3181b65fd7 RSP: 002b:00007ffe74bcbe18 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3181b65fd7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555ea2559258 RBP: 0000555ea25591f0 R08: 00007ffe74bcad91 R09: 000000000000000a R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000003 R13: 00007ffe74bcae00 R14: 0000000000000000 R15: 0000555ea25591f0 Code: 01 00 00 02 0f 85 7d 01 00 00 48 63 45 d4 48 c7 c6 00 f4 fa 87 49 8b 9d 08 01 00 00 48 03 1c c6 4c 89 f7 e8 87 fb ff ff 48 85 c0 <48> 8b 3b 0f 84 c5 01 00 00 48 39 f8 0f 84 bc 01 00 00 48 89 c7 RIP: __queue_work+0x8c/0x410 RSP: ffffbe8cc249fcd8 CR2: 0000000000000000 ---[ end trace 7aa4f4a232e9c39c ]--- Unregistering the led device on the remove callback before destroying the workqueue avoids this problem. https://bugzilla.kernel.org/show_bug.cgi?id=196097 Reported-by: Dun Hum <bitter.taste@gmx.com> Cc: stable@vger.kernel.org Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> | 04 May 2018, 20:20:02 UTC |
| 625e200 | Linus Torvalds | 04 May 2018, 15:47:21 UTC | Merge tag 'for-linus-4.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen cleanup from Juergen Gross: "One cleanup to remove VLAs from the kernel" * tag 'for-linus-4.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Remove use of VLAs | 04 May 2018, 15:47:21 UTC |
| b220244 | James Morse | 04 May 2018, 15:19:24 UTC | arm64: vgic-v2: Fix proxying of cpuif access Proxying the cpuif accesses at EL2 makes use of vcpu_data_guest_to_host and co, which check the endianness, which call into vcpu_read_sys_reg... which isn't mapped at EL2 (it was inlined before, and got moved OoL with the VHE optimizations). The result is of course a nice panic. Let's add some specialized cruft to keep the broken platforms that require this hack alive. But, this code used vcpu_data_guest_to_host(), which expected us to write the value to host memory, instead we have trapped the guest's read or write to an mmio-device, and are about to replay it using the host's readl()/writel() which also perform swabbing based on the host endianness. This goes wrong when both host and guest are big-endian, as readl()/writel() will undo the guest's swabbing, causing the big-endian value to be written to device-memory. What needs doing? A big-endian guest will have pre-swabbed data before storing, undo this. If its necessary for the host, writel() will re-swab it. For a read a big-endian guest expects to swab the data after the load. The hosts's readl() will correct for host endianness, giving us the device-memory's value in the register. For a big-endian guest, swab it as if we'd only done the load. For a little-endian guest, nothing needs doing as readl()/writel() leave the correct device-memory value in registers. Tested on Juno with that rarest of things: a big-endian 64K host. Based on a patch from Marc Zyngier. Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com> Fixes: bf8feb39642b ("arm64: KVM: vgic-v2: Add GICV access from HYP") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> | 04 May 2018, 15:45:55 UTC |
| c3616a0 | Valentin Schneider | 02 May 2018, 10:53:03 UTC | KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance One comment still mentioned process_maintenance operations after commit af0614991ab6 ("KVM: arm/arm64: vgic: Get rid of unnecessary process_maintenance operation") Update the comment to point to vgic_fold_lr_state instead, which is where maintenance interrupts are taken care of. Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> | 04 May 2018, 15:44:54 UTC |
| 1975fa5 | James Morse | 02 May 2018, 11:17:02 UTC | KVM: arm64: Fix order of vcpu_write_sys_reg() arguments A typo in kvm_vcpu_set_be()'s call: | vcpu_write_sys_reg(vcpu, SCTLR_EL1, sctlr) causes us to use the 32bit register value as an index into the sys_reg[] array, and sail off the end of the linear map when we try to bring up big-endian secondaries. | Unable to handle kernel paging request at virtual address ffff80098b982c00 | Mem abort info: | ESR = 0x96000045 | Exception class = DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | Data abort info: | ISV = 0, ISS = 0x00000045 | CM = 0, WnR = 1 | swapper pgtable: 4k pages, 48-bit VAs, pgdp = 000000002ea0571a | [ffff80098b982c00] pgd=00000009ffff8803, pud=0000000000000000 | Internal error: Oops: 96000045 [#1] PREEMPT SMP | Modules linked in: | CPU: 2 PID: 1561 Comm: kvm-vcpu-0 Not tainted 4.17.0-rc3-00001-ga912e2261ca6-dirty #1323 | Hardware name: ARM Juno development board (r1) (DT) | pstate: 60000005 (nZCv daif -PAN -UAO) | pc : vcpu_write_sys_reg+0x50/0x134 | lr : vcpu_write_sys_reg+0x50/0x134 | Process kvm-vcpu-0 (pid: 1561, stack limit = 0x000000006df4728b) | Call trace: | vcpu_write_sys_reg+0x50/0x134 | kvm_psci_vcpu_on+0x14c/0x150 | kvm_psci_0_2_call+0x244/0x2a4 | kvm_hvc_call_handler+0x1cc/0x258 | handle_hvc+0x20/0x3c | handle_exit+0x130/0x1ec | kvm_arch_vcpu_ioctl_run+0x340/0x614 | kvm_vcpu_ioctl+0x4d0/0x840 | do_vfs_ioctl+0xc8/0x8d0 | ksys_ioctl+0x78/0xa8 | sys_ioctl+0xc/0x18 | el0_svc_naked+0x30/0x34 | Code: 73620291 604d00b0 00201891 1ab10194 (957a33f8) |---[ end trace 4b4a4f9628596602 ]--- Fix the order of the arguments. Fixes: 8d404c4c24613 ("KVM: arm64: Rewrite system register accessors to read/write functions") CC: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> | 04 May 2018, 15:44:54 UTC |
| 54c6fd5 | Linus Torvalds | 04 May 2018, 15:44:50 UTC | Merge tag 'pm-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "This fixes a regression from the 4.14 cycle in the CPPC cpufreq driver causing it to use an incorrect transition delay value which leads to a very high rate of frequency change requests when the schedutil governor is in use (Prashanth Prakash)" * tag 'pm-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq / CPPC: Set platform specific transition_delay_us | 04 May 2018, 15:44:50 UTC |
| c33ede1 | Linus Torvalds | 04 May 2018, 15:43:33 UTC | Merge tag 'acpi-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "This fixes an ACPICA utilities (acpidump) build regression from the 4.16 cycle by setting LD in the CFLAGS passed to the linker to $(CC) again (Jiri Slaby)" * tag 'acpi-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tools: power/acpi, revert to LD = gcc | 04 May 2018, 15:43:33 UTC |
| b99dc74 | Linus Torvalds | 04 May 2018, 15:38:51 UTC | Merge tag 'media/v4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a trivial one-line fix addressing a PTR_ERR() getting value from a wrong var at imx driver - a patch changing my e-mail at the Kernel tree to mchehab@kernel.org. no code changes * tag 'media/v4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: MAINTAINERS & files: Canonize the e-mails I use at files media: imx-media-csi: Fix inconsistent IS_ERR and PTR_ERR | 04 May 2018, 15:38:51 UTC |
| dac1acc | Linus Torvalds | 04 May 2018, 15:37:22 UTC | Merge tag 'sound-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes, all deserved for stable. Two are about core API fixes for the bugs that were triggered by ever-growing fuzzers, while others are driver-specific fixes" * tag 'sound-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: Check PCM state at xfern compat ioctl ALSA: aloop: Add missing cable lock to ctl API callbacks ALSA: dice: fix kernel NULL pointer dereference due to invalid calculation for array index ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger() ALSA: hda - Fix incorrect usage of IS_REACHABLE() | 04 May 2018, 15:37:22 UTC |
