Revision 0251d196b0e1a19c870be882e5d4f496de8ab758 authored by Guangbin Huang on 27 October 2021, 12:11:45 UTC, committed by David S. Miller on 27 October 2021, 13:47:33 UTC
Currently, if there is a reset event triggered by RAS during device in initialization process, driver may run reset process concurrently with initialization process. In this case, it may cause problem. For example, the RSS indirection table may has not been alloc memory in initialization process yet, but it is used in reset process, it will cause a call trace like this: [61228.744836] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... [61228.897677] Workqueue: hclgevf hclgevf_service_task [hclgevf] [61228.911390] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) [61228.918670] pc : hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61228.927812] lr : hclgevf_set_rss_indir_table+0x90/0x190 [hclgevf] [61228.937248] sp : ffff8000162ebb50 [61228.941087] x29: ffff8000162ebb50 x28: ffffb77add72dbc0 x27: ffff0820c7dc8080 [61228.949516] x26: 0000000000000000 x25: ffff0820ad4fc880 x24: ffff0820c7dc8080 [61228.958220] x23: ffff0820c7dc8090 x22: 00000000ffffffff x21: 0000000000000040 [61228.966360] x20: ffffb77add72b9c0 x19: 0000000000000000 x18: 0000000000000030 [61228.974646] x17: 0000000000000000 x16: ffffb77ae713feb0 x15: ffff0820ad4fcce8 [61228.982808] x14: ffffffffffffffff x13: ffff8000962eb7f7 x12: 00003834ec70c960 [61228.991990] x11: 00e0fafa8c206982 x10: 9670facc78a8f9a8 x9 : ffffb77add717530 [61229.001123] x8 : ffff0820ad4fd6b8 x7 : 0000000000000000 x6 : 0000000000000011 [61229.010249] x5 : 00000000000cb1b0 x4 : 0000000000002adb x3 : 0000000000000049 [61229.018662] x2 : ffff8000162ebbb8 x1 : 0000000000000000 x0 : 0000000000000480 [61229.027002] Call trace: [61229.030177] hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61229.039009] hclgevf_rss_init_hw+0x128/0x1b4 [hclgevf] [61229.046809] hclgevf_reset_rebuild+0x17c/0x69c [hclgevf] [61229.053862] hclgevf_reset_service_task+0x4cc/0xa80 [hclgevf] [61229.061306] hclgevf_service_task+0x6c/0x630 [hclgevf] [61229.068491] process_one_work+0x1dc/0x48c [61229.074121] worker_thread+0x15c/0x464 [61229.078562] kthread+0x168/0x16c [61229.082873] ret_from_fork+0x10/0x18 [61229.088221] Code: 7900e7f6 f904a683 d503201f 9101a3e2 (38616b43) [61229.095357] ---[ end trace 153661a538f6768c ]--- To fix this problem, don't schedule reset task before initialization process is done. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent f29da40
cleanfile
#!/usr/bin/env perl
# SPDX-License-Identifier: GPL-2.0
#
# Clean a text file -- or directory of text files -- of stealth whitespace.
# WARNING: this can be a highly destructive operation. Use with caution.
#
use warnings;
use bytes;
use File::Basename;
# Default options
$max_width = 79;
# Clean up space-tab sequences, either by removing spaces or
# replacing them with tabs.
sub clean_space_tabs($)
{
no bytes; # Tab alignment depends on characters
my($li) = @_;
my($lo) = '';
my $pos = 0;
my $nsp = 0;
my($i, $c);
for ($i = 0; $i < length($li); $i++) {
$c = substr($li, $i, 1);
if ($c eq "\t") {
my $npos = ($pos+$nsp+8) & ~7;
my $ntab = ($npos >> 3) - ($pos >> 3);
$lo .= "\t" x $ntab;
$pos = $npos;
$nsp = 0;
} elsif ($c eq "\n" || $c eq "\r") {
$lo .= " " x $nsp;
$pos += $nsp;
$nsp = 0;
$lo .= $c;
$pos = 0;
} elsif ($c eq " ") {
$nsp++;
} else {
$lo .= " " x $nsp;
$pos += $nsp;
$nsp = 0;
$lo .= $c;
$pos++;
}
}
$lo .= " " x $nsp;
return $lo;
}
# Compute the visual width of a string
sub strwidth($) {
no bytes; # Tab alignment depends on characters
my($li) = @_;
my($c, $i);
my $pos = 0;
my $mlen = 0;
for ($i = 0; $i < length($li); $i++) {
$c = substr($li,$i,1);
if ($c eq "\t") {
$pos = ($pos+8) & ~7;
} elsif ($c eq "\n") {
$mlen = $pos if ($pos > $mlen);
$pos = 0;
} else {
$pos++;
}
}
$mlen = $pos if ($pos > $mlen);
return $mlen;
}
$name = basename($0);
@files = ();
while (defined($a = shift(@ARGV))) {
if ($a =~ /^-/) {
if ($a eq '-width' || $a eq '-w') {
$max_width = shift(@ARGV)+0;
} else {
print STDERR "Usage: $name [-width #] files...\n";
exit 1;
}
} else {
push(@files, $a);
}
}
foreach $f ( @files ) {
print STDERR "$name: $f\n";
if (! -f $f) {
print STDERR "$f: not a file\n";
next;
}
if (!open(FILE, '+<', $f)) {
print STDERR "$name: Cannot open file: $f: $!\n";
next;
}
binmode FILE;
# First, verify that it is not a binary file; consider any file
# with a zero byte to be a binary file. Is there any better, or
# additional, heuristic that should be applied?
$is_binary = 0;
while (read(FILE, $data, 65536) > 0) {
if ($data =~ /\0/) {
$is_binary = 1;
last;
}
}
if ($is_binary) {
print STDERR "$name: $f: binary file\n";
next;
}
seek(FILE, 0, 0);
$in_bytes = 0;
$out_bytes = 0;
$blank_bytes = 0;
@blanks = ();
@lines = ();
$lineno = 0;
while ( defined($line = <FILE>) ) {
$lineno++;
$in_bytes += length($line);
$line =~ s/[ \t\r]*$//; # Remove trailing spaces
$line = clean_space_tabs($line);
if ( $line eq "\n" ) {
push(@blanks, $line);
$blank_bytes += length($line);
} else {
push(@lines, @blanks);
$out_bytes += $blank_bytes;
push(@lines, $line);
$out_bytes += length($line);
@blanks = ();
$blank_bytes = 0;
}
$l_width = strwidth($line);
if ($max_width && $l_width > $max_width) {
print STDERR
"$f:$lineno: line exceeds $max_width characters ($l_width)\n";
}
}
# Any blanks at the end of the file are discarded
if ($in_bytes != $out_bytes) {
# Only write to the file if changed
seek(FILE, 0, 0);
print FILE @lines;
if ( !defined($where = tell(FILE)) ||
!truncate(FILE, $where) ) {
die "$name: Failed to truncate modified file: $f: $!\n";
}
}
close(FILE);
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...