Revision 0251d196b0e1a19c870be882e5d4f496de8ab758 authored by Guangbin Huang on 27 October 2021, 12:11:45 UTC, committed by David S. Miller on 27 October 2021, 13:47:33 UTC
Currently, if there is a reset event triggered by RAS during device in initialization process, driver may run reset process concurrently with initialization process. In this case, it may cause problem. For example, the RSS indirection table may has not been alloc memory in initialization process yet, but it is used in reset process, it will cause a call trace like this: [61228.744836] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... [61228.897677] Workqueue: hclgevf hclgevf_service_task [hclgevf] [61228.911390] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) [61228.918670] pc : hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61228.927812] lr : hclgevf_set_rss_indir_table+0x90/0x190 [hclgevf] [61228.937248] sp : ffff8000162ebb50 [61228.941087] x29: ffff8000162ebb50 x28: ffffb77add72dbc0 x27: ffff0820c7dc8080 [61228.949516] x26: 0000000000000000 x25: ffff0820ad4fc880 x24: ffff0820c7dc8080 [61228.958220] x23: ffff0820c7dc8090 x22: 00000000ffffffff x21: 0000000000000040 [61228.966360] x20: ffffb77add72b9c0 x19: 0000000000000000 x18: 0000000000000030 [61228.974646] x17: 0000000000000000 x16: ffffb77ae713feb0 x15: ffff0820ad4fcce8 [61228.982808] x14: ffffffffffffffff x13: ffff8000962eb7f7 x12: 00003834ec70c960 [61228.991990] x11: 00e0fafa8c206982 x10: 9670facc78a8f9a8 x9 : ffffb77add717530 [61229.001123] x8 : ffff0820ad4fd6b8 x7 : 0000000000000000 x6 : 0000000000000011 [61229.010249] x5 : 00000000000cb1b0 x4 : 0000000000002adb x3 : 0000000000000049 [61229.018662] x2 : ffff8000162ebbb8 x1 : 0000000000000000 x0 : 0000000000000480 [61229.027002] Call trace: [61229.030177] hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61229.039009] hclgevf_rss_init_hw+0x128/0x1b4 [hclgevf] [61229.046809] hclgevf_reset_rebuild+0x17c/0x69c [hclgevf] [61229.053862] hclgevf_reset_service_task+0x4cc/0xa80 [hclgevf] [61229.061306] hclgevf_service_task+0x6c/0x630 [hclgevf] [61229.068491] process_one_work+0x1dc/0x48c [61229.074121] worker_thread+0x15c/0x464 [61229.078562] kthread+0x168/0x16c [61229.082873] ret_from_fork+0x10/0x18 [61229.088221] Code: 7900e7f6 f904a683 d503201f 9101a3e2 (38616b43) [61229.095357] ---[ end trace 153661a538f6768c ]--- To fix this problem, don't schedule reset task before initialization process is done. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent f29da40
show_delta
#!/usr/bin/env python
# SPDX-License-Identifier: GPL-2.0-only
#
# show_deltas: Read list of printk messages instrumented with
# time data, and format with time deltas.
#
# Also, you can show the times relative to a fixed point.
#
# Copyright 2003 Sony Corporation
#
import sys
import string
def usage():
print ("""usage: show_delta [<options>] <filename>
This program parses the output from a set of printk message lines which
have time data prefixed because the CONFIG_PRINTK_TIME option is set, or
the kernel command line option "time" is specified. When run with no
options, the time information is converted to show the time delta between
each printk line and the next. When run with the '-b' option, all times
are relative to a single (base) point in time.
Options:
-h Show this usage help.
-b <base> Specify a base for time references.
<base> can be a number or a string.
If it is a string, the first message line
which matches (at the beginning of the
line) is used as the time reference.
ex: $ dmesg >timefile
$ show_delta -b NET4 timefile
will show times relative to the line in the kernel output
starting with "NET4".
""")
sys.exit(1)
# returns a tuple containing the seconds and text for each message line
# seconds is returned as a float
# raise an exception if no timing data was found
def get_time(line):
if line[0]!="[":
raise ValueError
# split on closing bracket
(time_str, rest) = string.split(line[1:],']',1)
time = string.atof(time_str)
#print "time=", time
return (time, rest)
# average line looks like:
# [ 0.084282] VFS: Mounted root (romfs filesystem) readonly
# time data is expressed in seconds.useconds,
# convert_line adds a delta for each line
last_time = 0.0
def convert_line(line, base_time):
global last_time
try:
(time, rest) = get_time(line)
except:
# if any problem parsing time, don't convert anything
return line
if base_time:
# show time from base
delta = time - base_time
else:
# just show time from last line
delta = time - last_time
last_time = time
return ("[%5.6f < %5.6f >]" % (time, delta)) + rest
def main():
base_str = ""
filein = ""
for arg in sys.argv[1:]:
if arg=="-b":
base_str = sys.argv[sys.argv.index("-b")+1]
elif arg=="-h":
usage()
else:
filein = arg
if not filein:
usage()
try:
lines = open(filein,"r").readlines()
except:
print ("Problem opening file: %s" % filein)
sys.exit(1)
if base_str:
print ('base= "%s"' % base_str)
# assume a numeric base. If that fails, try searching
# for a matching line.
try:
base_time = float(base_str)
except:
# search for line matching <base> string
found = 0
for line in lines:
try:
(time, rest) = get_time(line)
except:
continue
if string.find(rest, base_str)==1:
base_time = time
found = 1
# stop at first match
break
if not found:
print ('Couldn\'t find line matching base pattern "%s"' % base_str)
sys.exit(1)
else:
base_time = 0.0
for line in lines:
print (convert_line(line, base_time),)
main()
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...