| 0251d19 | Guangbin Huang | 27 October 2021, 12:11:45 UTC | net: hns3: ignore reset event before initialization process is done Currently, if there is a reset event triggered by RAS during device in initialization process, driver may run reset process concurrently with initialization process. In this case, it may cause problem. For example, the RSS indirection table may has not been alloc memory in initialization process yet, but it is used in reset process, it will cause a call trace like this: [61228.744836] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... [61228.897677] Workqueue: hclgevf hclgevf_service_task [hclgevf] [61228.911390] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) [61228.918670] pc : hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61228.927812] lr : hclgevf_set_rss_indir_table+0x90/0x190 [hclgevf] [61228.937248] sp : ffff8000162ebb50 [61228.941087] x29: ffff8000162ebb50 x28: ffffb77add72dbc0 x27: ffff0820c7dc8080 [61228.949516] x26: 0000000000000000 x25: ffff0820ad4fc880 x24: ffff0820c7dc8080 [61228.958220] x23: ffff0820c7dc8090 x22: 00000000ffffffff x21: 0000000000000040 [61228.966360] x20: ffffb77add72b9c0 x19: 0000000000000000 x18: 0000000000000030 [61228.974646] x17: 0000000000000000 x16: ffffb77ae713feb0 x15: ffff0820ad4fcce8 [61228.982808] x14: ffffffffffffffff x13: ffff8000962eb7f7 x12: 00003834ec70c960 [61228.991990] x11: 00e0fafa8c206982 x10: 9670facc78a8f9a8 x9 : ffffb77add717530 [61229.001123] x8 : ffff0820ad4fd6b8 x7 : 0000000000000000 x6 : 0000000000000011 [61229.010249] x5 : 00000000000cb1b0 x4 : 0000000000002adb x3 : 0000000000000049 [61229.018662] x2 : ffff8000162ebbb8 x1 : 0000000000000000 x0 : 0000000000000480 [61229.027002] Call trace: [61229.030177] hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61229.039009] hclgevf_rss_init_hw+0x128/0x1b4 [hclgevf] [61229.046809] hclgevf_reset_rebuild+0x17c/0x69c [hclgevf] [61229.053862] hclgevf_reset_service_task+0x4cc/0xa80 [hclgevf] [61229.061306] hclgevf_service_task+0x6c/0x630 [hclgevf] [61229.068491] process_one_work+0x1dc/0x48c [61229.074121] worker_thread+0x15c/0x464 [61229.078562] kthread+0x168/0x16c [61229.082873] ret_from_fork+0x10/0x18 [61229.088221] Code: 7900e7f6 f904a683 d503201f 9101a3e2 (38616b43) [61229.095357] ---[ end trace 153661a538f6768c ]--- To fix this problem, don't schedule reset task before initialization process is done. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2021, 13:47:33 UTC |
| f29da40 | Yufeng Mo | 27 October 2021, 12:11:44 UTC | net: hns3: change hclge/hclgevf workqueue to WQ_UNBOUND mode Currently, the workqueue of hclge/hclgevf is executed on the CPU that initiates scheduling requests by default. In stress scenarios, the CPU may be busy and workqueue scheduling is completed after a long period of time. To avoid this situation and implement proper scheduling, use the WQ_UNBOUND mode instead. In this way, the workqueue can be performed on a relatively idle CPU. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2021, 13:47:33 UTC |
| 3bda2e5 | Guangbin Huang | 27 October 2021, 12:11:43 UTC | net: hns3: fix pause config problem after autoneg disabled If a TP port is configured by follow steps: 1.ethtool -s ethx autoneg off speed 100 duplex full 2.ethtool -A ethx rx on tx on 3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off) 4.ethtool -s ethx autoneg off speed 100 duplex full In step 3, driver will set rx&tx pause parameters of hardware to off as pause parameters negotiated with link partner are off. After step 4, the "ethtool -a ethx" command shows both rx and tx pause parameters are on. However, pause parameters of hardware are still off and port has no flow control function actually. To fix this problem, if autoneg is disabled, driver uses its saved parameters to restore pause of hardware. If the speed is not changed in this case, there is no link state changed for phy, it will cause the pause parameter is not taken effect, so we need to force phy to go down and up. Fixes: aacbe27e82f0 ("net: hns3: modify how pause options is displayed") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2021, 13:47:33 UTC |
| 440ffcd | Jakub Kicinski | 26 October 2021, 21:38:54 UTC | Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2021-10-26 We've added 12 non-merge commits during the last 7 day(s) which contain a total of 23 files changed, 118 insertions(+), 98 deletions(-). The main changes are: 1) Fix potential race window in BPF tail call compatibility check, from Toke Høiland-Jørgensen. 2) Fix memory leak in cgroup fs due to missing cgroup_bpf_offline(), from Quanyang Wang. 3) Fix file descriptor reference counting in generic_map_update_batch(), from Xu Kuohai. 4) Fix bpf_jit_limit knob to the max supported limit by the arch's JIT, from Lorenz Bauer. 5) Fix BPF sockmap ->poll callbacks for UDP and AF_UNIX sockets, from Cong Wang and Yucong Sun. 6) Fix BPF sockmap concurrency issue in TCP on non-blocking sendmsg calls, from Liu Jian. 7) Fix build failure of INODE_STORAGE and TASK_STORAGE maps on !CONFIG_NET, from Tejun Heo. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix potential race in tail call compatibility check bpf: Move BPF_MAP_TYPE for INODE_STORAGE and TASK_STORAGE outside of CONFIG_NET selftests/bpf: Use recv_timeout() instead of retries net: Implement ->sock_is_readable() for UDP and AF_UNIX skmsg: Extract and reuse sk_msg_is_readable() net: Rename ->stream_memory_read to ->sock_is_readable tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function cgroup: Fix memory leak caused by missing cgroup_bpf_offline bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch() bpf: Prevent increasing bpf_jit_limit above max bpf: Define bpf_jit_alloc_exec_limit for arm64 JIT bpf: Define bpf_jit_alloc_exec_limit for riscv JIT ==================== Link: https://lore.kernel.org/r/20211026201920.11296-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2021, 21:38:55 UTC |
| 54713c8 | Toke Høiland-Jørgensen | 26 October 2021, 11:00:19 UTC | bpf: Fix potential race in tail call compatibility check Lorenzo noticed that the code testing for program type compatibility of tail call maps is potentially racy in that two threads could encounter a map with an unset type simultaneously and both return true even though they are inserting incompatible programs. The race window is quite small, but artificially enlarging it by adding a usleep_range() inside the check in bpf_prog_array_compatible() makes it trivial to trigger from userspace with a program that does, essentially: map_fd = bpf_create_map(BPF_MAP_TYPE_PROG_ARRAY, 4, 4, 2, 0); pid = fork(); if (pid) { key = 0; value = xdp_fd; } else { key = 1; value = tc_fd; } err = bpf_map_update_elem(map_fd, &key, &value, 0); While the race window is small, it has potentially serious ramifications in that triggering it would allow a BPF program to tail call to a program of a different type. So let's get rid of it by protecting the update with a spinlock. The commit in the Fixes tag is the last commit that touches the code in question. v2: - Use a spinlock instead of an atomic variable and cmpxchg() (Alexei) v3: - Put lock and the members it protects into an embedded 'owner' struct (Daniel) Fixes: 3324b584b6f6 ("ebpf: misc core cleanup") Reported-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211026110019.363464-1-toke@redhat.com | 26 October 2021, 19:37:28 UTC |
| 99d0a38 | Tejun Heo | 21 October 2021, 18:46:10 UTC | bpf: Move BPF_MAP_TYPE for INODE_STORAGE and TASK_STORAGE outside of CONFIG_NET bpf_types.h has BPF_MAP_TYPE_INODE_STORAGE and BPF_MAP_TYPE_TASK_STORAGE declared inside #ifdef CONFIG_NET although they are built regardless of CONFIG_NET. So, when CONFIG_BPF_SYSCALL && !CONFIG_NET, they are built without the declarations leading to spurious build failures and not registered to bpf_map_types making them unavailable. Fix it by moving the BPF_MAP_TYPE for the two map types outside of CONFIG_NET. Reported-by: kernel test robot <lkp@intel.com> Fixes: a10787e6d58c ("bpf: Enable task local storage for tracing programs") Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/YXG1cuuSJDqHQfRY@slm.duckdns.org | 26 October 2021, 19:35:16 UTC |
| a94b5aa | Alexei Starovoitov | 26 October 2021, 19:29:33 UTC | Merge branch 'sock_map: fix ->poll() and update selftests' Cong Wang says: ==================== This patchset fixes ->poll() for sockets in sockmap and updates selftests accordingly with select(). Please check each patch for more details. Fixes: c50524ec4e3a ("Merge branch 'sockmap: add sockmap support for unix datagram socket'") Fixes: 89d69c5d0fbc ("Merge branch 'sockmap: introduce BPF_SK_SKB_VERDICT and support UDP'") Acked-by: John Fastabend <john.fastabend@gmail.com> --- v4: add a comment in udp_poll() v3: drop sk_psock_get_checked() reuse tcp_bpf_sock_is_readable() v2: rename and reuse ->stream_memory_read() fix a compile error in sk_psock_get_checked() Cong Wang (3): net: rename ->stream_memory_read to ->sock_is_readable skmsg: extract and reuse sk_msg_is_readable() net: implement ->sock_is_readable() for UDP and AF_UNIX ==================== Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> | 26 October 2021, 19:30:12 UTC |
| 67b8215 | Yucong Sun | 08 October 2021, 20:33:06 UTC | selftests/bpf: Use recv_timeout() instead of retries We use non-blocking sockets in those tests, retrying for EAGAIN is ugly because there is no upper bound for the packet arrival time, at least in theory. After we fix poll() on sockmap sockets, now we can switch to select()+recv(). Signed-off-by: Yucong Sun <sunyucong@gmail.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211008203306.37525-5-xiyou.wangcong@gmail.com | 26 October 2021, 19:29:33 UTC |
| af49338 | Cong Wang | 08 October 2021, 20:33:05 UTC | net: Implement ->sock_is_readable() for UDP and AF_UNIX Yucong noticed we can't poll() sockets in sockmap even when they are the destination sockets of redirections. This is because we never poll any psock queues in ->poll(), except for TCP. With ->sock_is_readable() now we can overwrite >sock_is_readable(), invoke and implement it for both UDP and AF_UNIX sockets. Reported-by: Yucong Sun <sunyucong@gmail.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211008203306.37525-4-xiyou.wangcong@gmail.com | 26 October 2021, 19:29:33 UTC |
| fb4e0a5 | Cong Wang | 08 October 2021, 20:33:04 UTC | skmsg: Extract and reuse sk_msg_is_readable() tcp_bpf_sock_is_readable() is pretty much generic, we can extract it and reuse it for non-TCP sockets. Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211008203306.37525-3-xiyou.wangcong@gmail.com | 26 October 2021, 19:29:33 UTC |
| 7b50ecf | Cong Wang | 08 October 2021, 20:33:03 UTC | net: Rename ->stream_memory_read to ->sock_is_readable The proto ops ->stream_memory_read() is currently only used by TCP to check whether psock queue is empty or not. We need to rename it before reusing it for non-TCP protocols, and adjust the exsiting users accordingly. Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211008203306.37525-2-xiyou.wangcong@gmail.com | 26 October 2021, 19:29:33 UTC |
| cd9733f | Liu Jian | 12 October 2021, 05:20:19 UTC | tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function With two Msgs, msgA and msgB and a user doing nonblocking sendmsg calls (or multiple cores) on a single socket 'sk' we could get the following flow. msgA, sk msgB, sk ----------- --------------- tcp_bpf_sendmsg() lock(sk) psock = sk->psock tcp_bpf_sendmsg() lock(sk) ... blocking tcp_bpf_send_verdict if (psock->eval == NONE) psock->eval = sk_psock_msg_verdict .. < handle SK_REDIRECT case > release_sock(sk) < lock dropped so grab here > ret = tcp_bpf_sendmsg_redir psock = sk->psock tcp_bpf_send_verdict lock_sock(sk) ... blocking on B if (psock->eval == NONE) <- boom. psock->eval will have msgA state The problem here is we dropped the lock on msgA and grabbed it with msgB. Now we have old state in psock and importantly psock->eval has not been cleared. So msgB will run whatever action was done on A and the verdict program may never see it. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211012052019.184398-1-liujian56@huawei.com | 26 October 2021, 19:25:55 UTC |
| 19fa088 | Vadym Kochan | 26 October 2021, 12:19:07 UTC | MAINTAINERS: please remove myself from the Prestera driver Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 October 2021, 14:19:41 UTC |
| db6c3c0 | Johan Hovold | 26 October 2021, 10:36:17 UTC | net: lan78xx: fix division by zero in send path Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org # 4.3 Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 October 2021, 14:18:39 UTC |
| 6f68cd6 | Pavel Skripkin | 24 October 2021, 13:13:56 UTC | net: batman-adv: fix error handling Syzbot reported ODEBUG warning in batadv_nc_mesh_free(). The problem was in wrong error handling in batadv_mesh_init(). Before this patch batadv_mesh_init() was calling batadv_mesh_free() in case of any batadv_*_init() calls failure. This approach may work well, when there is some kind of indicator, which can tell which parts of batadv are initialized; but there isn't any. All written above lead to cleaning up uninitialized fields. Even if we hide ODEBUG warning by initializing bat_priv->nc.work, syzbot was able to hit GPF in batadv_nc_purge_paths(), because hash pointer in still NULL. [1] To fix these bugs we can unwind batadv_*_init() calls one by one. It is good approach for 2 reasons: 1) It fixes bugs on error handling path 2) It improves the performance, since we won't call unneeded batadv_*_free() functions. So, this patch makes all batadv_*_init() clean up all allocated memory before returning with an error to no call correspoing batadv_*_free() and open-codes batadv_mesh_free() with proper order to avoid touching uninitialized fields. Link: https://lore.kernel.org/netdev/000000000000c87fbd05cef6bcb0@google.com/ [1] Reported-and-tested-by: syzbot+28b0702ada0bf7381f58@syzkaller.appspotmail.com Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 October 2021, 13:47:12 UTC |
| fa40d97 | Max VA | 25 October 2021, 15:31:53 UTC | tipc: fix size validations for the MSG_CRYPTO type The function tipc_crypto_key_rcv is used to parse MSG_CRYPTO messages to receive keys from other nodes in the cluster in order to decrypt any further messages from them. This patch verifies that any supplied sizes in the message body are valid for the received message. Fixes: 1ef6f7c9390f ("tipc: add automatic session key exchange") Signed-off-by: Max VA <maxv@sentinelone.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 October 2021, 12:43:07 UTC |
| 2195f20 | Krzysztof Kozlowski | 25 October 2021, 14:49:36 UTC | nfc: port100: fix using -ERRNO as command type mask During probing, the driver tries to get a list (mask) of supported command types in port100_get_command_type_mask() function. The value is u64 and 0 is treated as invalid mask (no commands supported). The function however returns also -ERRNO as u64 which will be interpret as valid command mask. Return 0 on every error case of port100_get_command_type_mask(), so the probing will stop. Cc: <stable@vger.kernel.org> Fixes: 0347a6ab300a ("NFC: port100: Commands mechanism implementation") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 October 2021, 12:42:00 UTC |
| eacd68b | David S. Miller | 26 October 2021, 12:26:09 UTC | Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-25 This series contains updates to ice driver only. Dave adds event handler for LAG NETDEV_UNREGISTER to unlink device from link aggregate. Yongxin Liu adds a check for PTP support during release which would cause a call trace on non-PTP supported devices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 26 October 2021, 12:26:09 UTC |
| 9122a70 | Cyril Strejc | 24 October 2021, 20:14:25 UTC | net: multicast: calculate csum of looped-back and forwarded packets During a testing of an user-space application which transmits UDP multicast datagrams and utilizes multicast routing to send the UDP datagrams out of defined network interfaces, I've found a multicast router does not fill-in UDP checksum into locally produced, looped-back and forwarded UDP datagrams, if an original output NIC the datagrams are sent to has UDP TX checksum offload enabled. The datagrams are sent malformed out of the NIC the datagrams have been forwarded to. It is because: 1. If TX checksum offload is enabled on the output NIC, UDP checksum is not calculated by kernel and is not filled into skb data. 2. dev_loopback_xmit(), which is called solely by ip_mc_finish_output(), sets skb->ip_summed = CHECKSUM_UNNECESSARY unconditionally. 3. Since 35fc92a9 ("[NET]: Allow forwarding of ip_summed except CHECKSUM_COMPLETE"), the ip_summed value is preserved during forwarding. 4. If ip_summed != CHECKSUM_PARTIAL, checksum is not calculated during a packet egress. The minimum fix in dev_loopback_xmit(): 1. Preserves skb->ip_summed CHECKSUM_PARTIAL. This is the case when the original output NIC has TX checksum offload enabled. The effects are: a) If the forwarding destination interface supports TX checksum offloading, the NIC driver is responsible to fill-in the checksum. b) If the forwarding destination interface does NOT support TX checksum offloading, checksums are filled-in by kernel before skb is submitted to the NIC driver. c) For local delivery, checksum validation is skipped as in the case of CHECKSUM_UNNECESSARY, thanks to skb_csum_unnecessary(). 2. Translates ip_summed CHECKSUM_NONE to CHECKSUM_UNNECESSARY. It means, for CHECKSUM_NONE, the behavior is unmodified and is there to skip a looped-back packet local delivery checksum validation. Signed-off-by: Cyril Strejc <cyril.strejc@skoda.cz> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 October 2021, 12:09:22 UTC |
| 7596357 | Ido Schimmel | 24 October 2021, 06:40:14 UTC | mlxsw: pci: Recycle received packet upon allocation failure When the driver fails to allocate a new Rx buffer, it passes an empty Rx descriptor (contains zero address and size) to the device and marks it as invalid by setting the skb pointer in the descriptor's metadata to NULL. After processing enough Rx descriptors, the driver will try to process the invalid descriptor, but will return immediately seeing that the skb pointer is NULL. Since the driver no longer passes new Rx descriptors to the device, the Rx queue will eventually become full and the device will start to drop packets. Fix this by recycling the received packet if allocation of the new packet failed. This means that allocation is no longer performed at the end of the Rx routine, but at the start, before tearing down the DMA mapping of the received packet. Remove the comment about the descriptor being zeroed as it is no longer correct. This is OK because we either use the descriptor as-is (when recycling) or overwrite its address and size fields with that of the newly allocated Rx buffer. The issue was discovered when a process ("perf") consumed too much memory and put the system under memory pressure. It can be reproduced by injecting slab allocation failures [1]. After the fix, the Rx queue no longer comes to a halt. [1] # echo 10 > /sys/kernel/debug/failslab/times # echo 1000 > /sys/kernel/debug/failslab/interval # echo 100 > /sys/kernel/debug/failslab/probability FAULT_INJECTION: forcing a failure. name failslab, interval 1000, probability 100, space 0, times 8 [...] Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 should_fail.cold+0x32/0x37 should_failslab+0x5/0x10 kmem_cache_alloc_node+0x23/0x190 __alloc_skb+0x1f9/0x280 __netdev_alloc_skb+0x3a/0x150 mlxsw_pci_rdq_skb_alloc+0x24/0x90 mlxsw_pci_cq_tasklet+0x3dc/0x1200 tasklet_action_common.constprop.0+0x9f/0x100 __do_softirq+0xb5/0x252 irq_exit_rcu+0x7a/0xa0 common_interrupt+0x83/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 RIP: 0010:cpuidle_enter_state+0xc8/0x340 [...] mlxsw_spectrum2 0000:06:00.0: Failed to alloc skb for RDQ Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20211024064014.1060919-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2021, 01:21:23 UTC |
| fd1b5be | Yongxin Liu | 11 October 2021, 07:02:16 UTC | ice: check whether PTP is initialized in ice_ptp_release() PTP is currently only supported on E810 devices, it is checked in ice_ptp_init(). However, there is no check in ice_ptp_release(). For other E800 series devices, ice_ptp_release() will be wrongly executed. Fix the following calltrace. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Workqueue: ice ice_service_task [ice] Call Trace: dump_stack_lvl+0x5b/0x82 dump_stack+0x10/0x12 register_lock_class+0x495/0x4a0 ? find_held_lock+0x3c/0xb0 __lock_acquire+0x71/0x1830 lock_acquire+0x1e6/0x330 ? ice_ptp_release+0x3c/0x1e0 [ice] ? _raw_spin_lock+0x19/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] _raw_spin_lock+0x38/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] ice_ptp_release+0x3c/0x1e0 [ice] ice_prepare_for_reset+0xcb/0xe0 [ice] ice_do_reset+0x38/0x110 [ice] ice_service_task+0x138/0xf10 [ice] ? __this_cpu_preempt_check+0x13/0x20 process_one_work+0x26a/0x650 worker_thread+0x3f/0x3b0 ? __kthread_parkme+0x51/0xb0 ? process_one_work+0x650/0x650 kthread+0x161/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 25 October 2021, 20:44:55 UTC |
| 6a8b357 | Dave Ertman | 07 October 2021, 15:40:31 UTC | ice: Respond to a NETDEV_UNREGISTER event for LAG When the PF is a member of a link aggregate, and the driver is removed, the process will hang unless we respond to the NETDEV_UNREGISTER event that is sent to the event_handler for LAG. Add a case statement for the ice_lag_event_handler to unlink the PF from the link aggregate. Also remove code that was incorrectly applying a dev_hold to peer_netdevs that were associated with the ice driver. Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 25 October 2021, 20:44:37 UTC |
| f7a1e76 | Xin Long | 25 October 2021, 06:31:48 UTC | net-sysfs: initialize uid and gid before calling net_ns_get_ownership Currently in net_ns_get_ownership() it may not be able to set uid or gid if make_kuid or make_kgid returns an invalid value, and an uninit-value issue can be triggered by this. This patch is to fix it by initializing the uid and gid before calling net_ns_get_ownership(), as it does in kobject_get_ownership() Fixes: e6dee9f3893c ("net-sysfs: add netdev_change_owner()") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 October 2021, 15:17:32 UTC |
| 042b204 | Dongli Zhang | 22 October 2021, 23:31:39 UTC | xen/netfront: stop tx queues during live migration The tx queues are not stopped during the live migration. As a result, the ndo_start_xmit() may access netfront_info->queues which is freed by talk_to_netback()->xennet_destroy_queues(). This patch is to netif_device_detach() at the beginning of xen-netfront resuming, and netif_device_attach() at the end of resuming. CPU A CPU B talk_to_netback() -> if (info->queues) xennet_destroy_queues(info); to free netfront_info->queues xennet_start_xmit() to access netfront_info->queues -> err = xennet_create_queues(info, &num_queues); The idea is borrowed from virtio-net. Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 October 2021, 15:13:12 UTC |
| 0c57eee | Michael Chan | 25 October 2021, 09:05:28 UTC | net: Prevent infinite while loop in skb_tx_hash() Drivers call netdev_set_num_tc() and then netdev_set_tc_queue() to set the queue count and offset for each TC. So the queue count and offset for the TCs may be zero for a short period after dev->num_tc has been set. If a TX packet is being transmitted at this time in the code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see nonzero dev->num_tc but zero qcount for the TC. The while loop that keeps looping while hash >= qcount will not end. Fix it by checking the TC's qcount to be nonzero before using it. Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 October 2021, 14:58:01 UTC |
| ace19b9 | Trevor Woerner | 24 October 2021, 17:50:02 UTC | net: nxp: lpc_eth.c: avoid hang when bringing interface down A hard hang is observed whenever the ethernet interface is brought down. If the PHY is stopped before the LPC core block is reset, the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I re-arranged the ordering of the functions calls in lpc_eth_close() to reset the hardware before stopping the PHY. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Trevor Woerner <twoerner@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 October 2021, 14:40:27 UTC |
| b4ab21f | David S. Miller | 25 October 2021, 13:06:43 UTC | Merge branch 'ksettings-locking-fixes' Andrew Lunn says: ==================== ksettings_{get|set} lock fixes Walter Stoll <Walter.Stoll@duagon.com> reported a race condition between "ethtool -s eth0 speed 100 duplex full autoneg off" and phylib reading the current status from the PHY. Both ksetting_get and ksetting_set fail the take the phydev mutex, and as a result, there is a small window of time where the phydev members are not self consistent. Patch 1 fixes phy_ethtool_ksettings_get by adding the needed lock. Patches 2 and 3 move code around and perform to refactoring, to allow patch 4 to fix phy_ethtool_ksettings_set by added the lock. Thanks go to Walter for the detailed origional report, suggested fix, and testing of the proposed patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 25 October 2021, 13:06:43 UTC |
| af1a02a | Andrew Lunn | 24 October 2021, 19:48:05 UTC | phy: phy_ethtool_ksettings_set: Lock the PHY while changing settings There is a race condition where the PHY state machine can change members of the phydev structure at the same time userspace requests a change via ethtool. To prevent this, have phy_ethtool_ksettings_set take the PHY lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Reported-by: Walter Stoll <Walter.Stoll@duagon.com> Suggested-by: Walter Stoll <Walter.Stoll@duagon.com> Tested-by: Walter Stoll <Walter.Stoll@duagon.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 October 2021, 13:06:43 UTC |
| 707293a | Andrew Lunn | 24 October 2021, 19:48:04 UTC | phy: phy_start_aneg: Add an unlocked version Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 October 2021, 13:06:43 UTC |
| 64cd92d | Andrew Lunn | 24 October 2021, 19:48:03 UTC | phy: phy_ethtool_ksettings_set: Move after phy_start_aneg This allows it to make use of a helper which assume the PHY is already locked. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 October 2021, 13:06:43 UTC |
| c10a485 | Andrew Lunn | 24 October 2021, 19:48:02 UTC | phy: phy_ethtool_ksettings_get: Lock the phy for consistency The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 October 2021, 13:06:43 UTC |
| 95a359c | Yuiko Oshino | 22 October 2021, 15:53:43 UTC | net: ethernet: microchip: lan743x: Fix dma allocation failure by using dma_set_mask_and_coherent The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 October 2021, 12:38:56 UTC |
| d6423d2 | Yuiko Oshino | 22 October 2021, 15:13:53 UTC | net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume fails The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 October 2021, 12:37:48 UTC |
| 04f8ef5 | Quanyang Wang | 18 October 2021, 07:56:23 UTC | cgroup: Fix memory leak caused by missing cgroup_bpf_offline When enabling CONFIG_CGROUP_BPF, kmemleak can be observed by running the command as below: $mount -t cgroup -o none,name=foo cgroup cgroup/ $umount cgroup/ unreferenced object 0xc3585c40 (size 64): comm "mount", pid 425, jiffies 4294959825 (age 31.990s) hex dump (first 32 bytes): 01 00 00 80 84 8c 28 c0 00 00 00 00 00 00 00 00 ......(......... 00 00 00 00 00 00 00 00 6c 43 a0 c3 00 00 00 00 ........lC...... backtrace: [<e95a2f9e>] cgroup_bpf_inherit+0x44/0x24c [<1f03679c>] cgroup_setup_root+0x174/0x37c [<ed4b0ac5>] cgroup1_get_tree+0x2c0/0x4a0 [<f85b12fd>] vfs_get_tree+0x24/0x108 [<f55aec5c>] path_mount+0x384/0x988 [<e2d5e9cd>] do_mount+0x64/0x9c [<208c9cfe>] sys_mount+0xfc/0x1f4 [<06dd06e0>] ret_fast_syscall+0x0/0x48 [<a8308cb3>] 0xbeb4daa8 This is because that since the commit 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") root_cgrp->bpf.refcnt.data is allocated by the function percpu_ref_init in cgroup_bpf_inherit which is called by cgroup_setup_root when mounting, but not freed along with root_cgrp when umounting. Adding cgroup_bpf_offline which calls percpu_ref_kill to cgroup_kill_sb can free root_cgrp->bpf.refcnt.data in umount path. This patch also fixes the commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself"). A cgroup_bpf_offline is needed to do a cleanup that frees the resources which are allocated by cgroup_bpf_inherit in cgroup_setup_root. And inside cgroup_bpf_offline, cgroup_get() is at the beginning and cgroup_put is at the end of cgroup_bpf_release which is called by cgroup_bpf_offline. So cgroup_bpf_offline can keep the balance of cgroup's refcount. Fixes: 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211018075623.26884-1-quanyang.wang@windriver.com | 23 October 2021, 00:23:54 UTC |
| fda7a38 | Xu Kuohai | 19 October 2021, 03:29:34 UTC | bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch() 1. The ufd in generic_map_update_batch() should be read from batch.map_fd; 2. A call to fdget() should be followed by a symmetric call to fdput(). Fixes: aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211019032934.1210517-1-xukuohai@huawei.com | 23 October 2021, 00:23:54 UTC |
| 22a1279 | Alexei Starovoitov | 21 October 2021, 01:19:02 UTC | Merge branch 'Fix up bpf_jit_limit some more' Lorenz Bauer says: ==================== Fix some inconsistencies of bpf_jit_limit on non-x86 platforms. I've dropped exposing bpf_jit_current since we couldn't agree on file modes, correct names, etc. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org> | 23 October 2021, 00:23:53 UTC |
| fadb7ff | Lorenz Bauer | 14 October 2021, 14:25:53 UTC | bpf: Prevent increasing bpf_jit_limit above max Restrict bpf_jit_limit to the maximum supported by the arch's JIT. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211014142554.53120-4-lmb@cloudflare.com | 23 October 2021, 00:23:53 UTC |
| 5d63ae9 | Lorenz Bauer | 14 October 2021, 14:25:52 UTC | bpf: Define bpf_jit_alloc_exec_limit for arm64 JIT Expose the maximum amount of useable memory from the arm64 JIT. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211014142554.53120-3-lmb@cloudflare.com | 23 October 2021, 00:23:53 UTC |
| 8f04db7 | Lorenz Bauer | 14 October 2021, 14:25:51 UTC | bpf: Define bpf_jit_alloc_exec_limit for riscv JIT Expose the maximum amount of useable memory from the riscv JIT. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Luke Nelson <luke.r.nels@gmail.com> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20211014142554.53120-2-lmb@cloudflare.com | 23 October 2021, 00:23:53 UTC |
| 1f83b83 | Florian Westphal | 21 October 2021, 14:02:47 UTC | fcnal-test: kill hanging ping/nettest binaries on cleanup On my box I see a bunch of ping/nettest processes hanging around after fcntal-test.sh is done. Clean those up before netns deletion. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211021140247.29691-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 21:03:18 UTC |
| 32f8807 | Jakub Kicinski | 22 October 2021, 19:36:47 UTC | Merge branch 'sctp-enhancements-for-the-verification-tag' Xin Long says: ==================== sctp: enhancements for the verification tag This patchset is to address CVE-2021-3772: A flaw was found in the Linux SCTP stack. A blind attacker may be able to kill an existing SCTP association through invalid chunks if the attacker knows the IP-addresses and port numbers being used and the attacker can send packets with spoofed IP addresses. This is caused by the missing VTAG verification for the received chunks and the incorrect vtag for the ABORT used to reply to these invalid chunks. This patchset is to go over all processing functions for the received chunks and do: 1. Make sure sctp_vtag_verify() is called firstly to verify the vtag from the received chunk and discard this chunk if it fails. With some exceptions: a. sctp_sf_do_5_1B_init()/5_2_2_dupinit()/9_2_reshutack(), processing INIT chunk, as sctphdr vtag is always 0 in INIT chunk. b. sctp_sf_do_5_2_4_dupcook(), processing dupicate COOKIE_ECHO chunk, as the vtag verification will be done by sctp_tietags_compare() and then it takes right actions according to the return. c. sctp_sf_shut_8_4_5(), processing SHUTDOWN_ACK chunk for cookie_wait and cookie_echoed state, as RFC demand sending a SHUTDOWN_COMPLETE even if the vtag verification failed. d. sctp_sf_ootb(), called in many types of chunks for closed state or no asoc, as the same reason to c. 2. Always use the vtag from the received INIT chunk to make the response ABORT in sctp_ootb_pkt_new(). 3. Fix the order for some checks and add some missing checks for the received chunk. This patch series has been tested with SCTP TAHI testing to make sure no regression caused on protocol conformance. ==================== Link: https://lore.kernel.org/r/cover.1634730082.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 19:36:47 UTC |
| 9d02831 | Xin Long | 20 October 2021, 11:42:47 UTC | sctp: add vtag check in sctp_sf_ootb sctp_sf_ootb() is called when processing DATA chunk in closed state, and many other places are also using it. The vtag in the chunk's sctphdr should be verified, otherwise, as later in chunk length check, it may send abort with the existent asoc's vtag, which can be exploited by one to cook a malicious chunk to terminate a SCTP asoc. When fails to verify the vtag from the chunk, this patch sets asoc to NULL, so that the abort will be made with the vtag from the received chunk later. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 19:36:45 UTC |
| ef16b17 | Xin Long | 20 October 2021, 11:42:46 UTC | sctp: add vtag check in sctp_sf_do_8_5_1_E_sa sctp_sf_do_8_5_1_E_sa() is called when processing SHUTDOWN_ACK chunk in cookie_wait and cookie_echoed state. The vtag in the chunk's sctphdr should be verified, otherwise, as later in chunk length check, it may send abort with the existent asoc's vtag, which can be exploited by one to cook a malicious chunk to terminate a SCTP asoc. Note that when fails to verify the vtag from SHUTDOWN-ACK chunk, SHUTDOWN COMPLETE message will still be sent back to peer, but with the vtag from SHUTDOWN-ACK chunk, as said in 5) of rfc4960#section-8.4. While at it, also remove the unnecessary chunk length check from sctp_sf_shut_8_4_5(), as it's already done in both places where it calls sctp_sf_shut_8_4_5(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 19:36:44 UTC |
| aa0f697 | Xin Long | 20 October 2021, 11:42:45 UTC | sctp: add vtag check in sctp_sf_violation sctp_sf_violation() is called when processing HEARTBEAT_ACK chunk in cookie_wait state, and some other places are also using it. The vtag in the chunk's sctphdr should be verified, otherwise, as later in chunk length check, it may send abort with the existent asoc's vtag, which can be exploited by one to cook a malicious chunk to terminate a SCTP asoc. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 19:36:44 UTC |
| a64b341 | Xin Long | 20 October 2021, 11:42:44 UTC | sctp: fix the processing for COOKIE_ECHO chunk 1. In closed state: in sctp_sf_do_5_1D_ce(): When asoc is NULL, making packet for abort will use chunk's vtag in sctp_ootb_pkt_new(). But when asoc exists, vtag from the chunk should be verified before using peer.i.init_tag to make packet for abort in sctp_ootb_pkt_new(), and just discard it if vtag is not correct. 2. In the other states: in sctp_sf_do_5_2_4_dupcook(): asoc always exists, but duplicate cookie_echo's vtag will be handled by sctp_tietags_compare() and then take actions, so before that we only verify the vtag for the abort sent for invalid chunk length. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 19:36:44 UTC |
| 438b95a | Xin Long | 20 October 2021, 11:42:43 UTC | sctp: fix the processing for INIT_ACK chunk Currently INIT_ACK chunk in non-cookie_echoed state is processed in sctp_sf_discard_chunk() to send an abort with the existent asoc's vtag if the chunk length is not valid. But the vtag in the chunk's sctphdr is not verified, which may be exploited by one to cook a malicious chunk to terminal a SCTP asoc. sctp_sf_discard_chunk() also is called in many other places to send an abort, and most of those have this problem. This patch is to fix it by sending abort with the existent asoc's vtag only if the vtag from the chunk's sctphdr is verified in sctp_sf_discard_chunk(). Note on sctp_sf_do_9_1_abort() and sctp_sf_shutdown_pending_abort(), the chunk length has been verified before sctp_sf_discard_chunk(), so replace it with sctp_sf_discard(). On sctp_sf_do_asconf_ack() and sctp_sf_do_asconf(), move the sctp_chunk_length_valid check ahead of sctp_sf_discard_chunk(), then replace it with sctp_sf_discard(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 19:36:44 UTC |
| eae5783 | Xin Long | 20 October 2021, 11:42:42 UTC | sctp: fix the processing for INIT chunk This patch fixes the problems below: 1. In non-shutdown_ack_sent states: in sctp_sf_do_5_1B_init() and sctp_sf_do_5_2_2_dupinit(): chunk length check should be done before any checks that may cause to send abort, as making packet for abort will access the init_tag from init_hdr in sctp_ootb_pkt_new(). 2. In shutdown_ack_sent state: in sctp_sf_do_9_2_reshutack(): The same checks as does in sctp_sf_do_5_2_2_dupinit() is needed for sctp_sf_do_9_2_reshutack(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 19:36:43 UTC |
| 4f7019c | Xin Long | 20 October 2021, 11:42:41 UTC | sctp: use init_tag from inithdr for ABORT chunk Currently Linux SCTP uses the verification tag of the existing SCTP asoc when failing to process and sending the packet with the ABORT chunk. This will result in the peer accepting the ABORT chunk and removing the SCTP asoc. One could exploit this to terminate a SCTP asoc. This patch is to fix it by always using the initiate tag of the received INIT chunk for the ABORT chunk to be sent. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 19:36:43 UTC |
| 7f678de | Vasily Averin | 22 October 2021, 10:28:37 UTC | skb_expand_head() adjust skb->truesize incorrectly Christoph Paasch reports [1] about incorrect skb->truesize after skb_expand_head() call in ip6_xmit. This may happen because of two reasons: - skb_set_owner_w() for newly cloned skb is called too early, before pskb_expand_head() where truesize is adjusted for (!skb-sk) case. - pskb_expand_head() does not adjust truesize in (skb->sk) case. In this case sk->sk_wmem_alloc should be adjusted too. [1] https://lkml.org/lkml/2021/8/20/1082 Fixes: f1260ff15a71 ("skbuff: introduce skb_expand_head()") Fixes: 2d85a1b31dde ("ipv6: ip6_finish_output2: set sk into newly allocated nskb") Reported-by: Christoph Paasch <christoph.paasch@gmail.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/644330dd-477e-0462-83bf-9f514c41edd1@virtuozzo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 19:35:51 UTC |
| 7fcb1c9 | Jakub Kicinski | 22 October 2021, 18:12:45 UTC | Merge tag 'mac80211-for-net-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Two small fixes: * RCU misuse in scan processing in cfg80211 * missing size check for HE data in mac80211 mesh * tag 'mac80211-for-net-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: cfg80211: scan: fix RCU in cfg80211_add_nontrans_list() mac80211: mesh: fix HE operation element length check ==================== Link: https://lore.kernel.org/r/20211021154351.134297-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 22 October 2021, 18:12:46 UTC |
| 6422251 | Linus Torvalds | 22 October 2021, 05:06:08 UTC | Merge tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Nothing too crazy at the end of the cycle, the kmb modesetting fixes are probably a bit large but it's not a major driver, and its fixing monitor doesn't turn on type problems. Otherwise it's just a few minor patches, one ast regression revert, an msm power stability fix. ast: - fix regression with connector detect msm: - fix power stability issue msxfb: - fix crash on unload panel: - sync fix kmb: - modesetting fixes" * tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm: Revert "drm/ast: Add detect function support" drm/kmb: Enable ADV bridge after modeset drm/kmb: Corrected typo in handle_lcd_irq drm/kmb: Disable change of plane parameters drm/kmb: Remove clearing DPHY regs drm/kmb: Limit supported mode to 1080p drm/kmb: Work around for higher system clock drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel drm: mxsfb: Fix NULL pointer dereference crash on unload drm/msm/devfreq: Restrict idle clamping to a618 for now | 22 October 2021, 05:06:08 UTC |
| 658aafc | Mike Rapoport | 21 October 2021, 07:09:29 UTC | memblock: exclude MEMBLOCK_NOMAP regions from kmemleak Vladimir Zapolskiy reports: Commit a7259df76702 ("memblock: make memblock_find_in_range method private") invokes a kernel panic while running kmemleak on OF platforms with nomaped regions: Unable to handle kernel paging request at virtual address fff000021e00000 [...] scan_block+0x64/0x170 scan_gray_list+0xe8/0x17c kmemleak_scan+0x270/0x514 kmemleak_write+0x34c/0x4ac The memory allocated from memblock is registered with kmemleak, but if it is marked MEMBLOCK_NOMAP it won't have linear map entries so an attempt to scan such areas will fault. Ideally, memblock_mark_nomap() would inform kmemleak to ignore MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces operating on physical addresses can use __va() conversion. Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP take care of informing kmemleak to ignore such memory. Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Tested-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 22 October 2021, 04:30:49 UTC |
| 6c9a545 | Mike Rapoport | 21 October 2021, 07:09:28 UTC | Revert "memblock: exclude NOMAP regions from kmemleak" Commit 6e44bd6d34d6 ("memblock: exclude NOMAP regions from kmemleak") breaks boot on EFI systems with kmemleak and VM_DEBUG enabled: efi: Processing EFI memory map: efi: 0x000090000000-0x000091ffffff [Conventional| | | | | | | | | | |WB|WT|WC|UC] efi: 0x000092000000-0x0000928fffff [Runtime Data|RUN| | | | | | | | | |WB|WT|WC|UC] ------------[ cut here ]------------ kernel BUG at mm/kmemleak.c:1140! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc6-next-20211019+ #104 pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kmemleak_free_part_phys+0x64/0x8c lr : kmemleak_free_part_phys+0x38/0x8c sp : ffff800011eafbc0 x29: ffff800011eafbc0 x28: 1fffff7fffb41c0d x27: fffffbfffda0e068 x26: 0000000092000000 x25: 1ffff000023d5f94 x24: ffff800011ed84d0 x23: ffff800011ed84c0 x22: ffff800011ed83d8 x21: 0000000000900000 x20: ffff800011782000 x19: 0000000092000000 x18: ffff800011ee0730 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffff0000233252c x14: ffff800019a905a0 x13: 0000000000000001 x12: ffff7000023d5ed7 x11: 1ffff000023d5ed6 x10: ffff7000023d5ed6 x9 : dfff800000000000 x8 : ffff800011eaf6b7 x7 : 0000000000000001 x6 : ffff800011eaf6b0 x5 : 00008ffffdc2a12a x4 : ffff7000023d5ed7 x3 : 1ffff000023dbf99 x2 : 1ffff000022f0463 x1 : 0000000000000000 x0 : ffffffffffffffff Call trace: kmemleak_free_part_phys+0x64/0x8c memblock_mark_nomap+0x5c/0x78 reserve_regions+0x294/0x33c efi_init+0x2d0/0x490 setup_arch+0x80/0x138 start_kernel+0xa0/0x3ec __primary_switched+0xc0/0xc8 Code: 34000041 97d526e7 f9418e80 36000040 (d4210000) random: get_random_bytes called from print_oops_end_marker+0x34/0x80 with crng_init=0 ---[ end trace 0000000000000000 ]--- The crash happens because kmemleak_free_part_phys() tries to use __va() before memstart_addr is initialized and this triggers a VM_BUG_ON() in arch/arm64/include/asm/memory.h: Revert 6e44bd6d34d6 ("memblock: exclude NOMAP regions from kmemleak"), the issue it is fixing will be fixed differently. Reported-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 22 October 2021, 04:30:49 UTC |
| 9d235ac | Linus Torvalds | 22 October 2021, 03:27:17 UTC | Merge branch 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ucounts fixes from Eric Biederman: "There has been one very hard to track down bug in the ucount code that we have been tracking since roughly v5.14 was released. Alex managed to find a reliable reproducer a few days ago and then I was able to instrument the code and figure out what the issue was. It turns out the sigqueue_alloc single atomic operation optimization did not play nicely with ucounts multiple level rlimits. It turned out that either sigqueue_alloc or sigqueue_free could be operating on multiple levels and trigger the conditions for the optimization on more than one level at the same time. To deal with that situation I have introduced inc_rlimit_get_ucounts and dec_rlimit_put_ucounts that just focuses on the optimization and the rlimit and ucount changes. While looking into the big bug I found I couple of other little issues so I am including those fixes here as well. When I have time I would very much like to dig into process ownership of the shared signal queue and see if we could pick a single owner for the entire queue so that all of the rlimits can count to that owner. That should entirely remove the need to call get_ucounts and put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult because Linux unlike POSIX supports setuid that works on a single thread" * 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring ucounts: Proper error handling in set_cred_ucounts ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds ucounts: Fix signal ucount refcounting | 22 October 2021, 03:27:17 UTC |
| 6c2c712 | Linus Torvalds | 22 October 2021, 01:36:50 UTC | Merge tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and can. We'll have one more fix for a socket accounting regression, it's still getting polished. Otherwise things look fine. Current release - regressions: - revert "vrf: reset skb conntrack connection on VRF rcv", there are valid uses for previous behavior - can: m_can: fix iomap_read_fifo() and iomap_write_fifo() Current release - new code bugs: - mlx5: e-switch, return correct error code on group creation failure Previous releases - regressions: - sctp: fix transport encap_port update in sctp_vtag_verify - stmmac: fix E2E delay mechanism (in PTP timestamping) Previous releases - always broken: - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of init - netfilter: ipvs: make global sysctl read-only in non-init netns - tcp: md5: fix selection between vrf and non-vrf keys - ipv6: count rx stats on the orig netdev when forwarding - bridge: mcast: use multicast_membership_interval for IGMPv3 - can: - j1939: fix UAF for rx_kref of j1939_priv abort sessions on receiving bad messages - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix return error on FC timeout on TX path - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited - hns3: schedule the polling again when allocation fails, prevent stalls - drivers: add missing of_node_put() when aborting for_each_available_child_of_node() - ptp: fix possible memory leak and UAF in ptp_clock_register() - e1000e: fix packet loss in burst mode on Tiger Lake and later - mlx5e: ipsec: fix more checksum offload issues" * tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) usbnet: sanity check for maxpacket net: enetc: make sure all traffic classes can send large frames net: enetc: fix ethtool counter name for PM0_TERR ptp: free 'vclock_index' in ptp_clock_release() sfc: Don't use netif_info before net_device setup sfc: Export fibre-specific supported link modes net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags net/mlx5e: IPsec: Fix a misuse of the software parser's fields net/mlx5e: Fix vlan data lost during suspend flow net/mlx5: E-switch, Return correct error code on group creation failure net/mlx5: Lag, change multipath and bonding to be mutually exclusive ice: Add missing E810 device ids igc: Update I226_K device ID e1000e: Fix packet loss on Tiger Lake and later e1000e: Separate TGP board type from SPT ptp: Fix possible memory leak in ptp_clock_register() net: stmmac: Fix E2E delay mechanism nfc: st95hf: Make spi remove() callback return zero net: hns3: disable sriov before unload hclge layer net: hns3: fix vf reset workqueue cannot exit ... | 22 October 2021, 01:36:50 UTC |
| 0a3221b | Linus Torvalds | 22 October 2021, 01:30:09 UTC | Merge tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a bug exposed by a previous fix, where running guests with certain SMT topologies could crash the host on Power8. - Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is enabled. Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider. * tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/smp: do not decrement idle task preempt count in CPU offline powerpc/idle: Don't corrupt back chain when going idle | 22 October 2021, 01:30:09 UTC |
| 595cb5e | Kim Phillips | 21 October 2021, 15:30:06 UTC | Revert "drm/ast: Add detect function support" This reverts commit aae74ff9caa8de9a45ae2e46068c417817392a26, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] <IRQ> [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] </IRQ> [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Fixes: aae74ff9caa8 ("drm/ast: Add detect function support") Link: https://lore.kernel.org/lkml/0f7871be-9ca6-5ae4-3a40-5db9a8fb2365@amd.com/ Cc: Ainux <ainux.wang@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: sterlingteng@gmail.com Cc: chenhuacai@kernel.org Cc: Chuck Lever III <chuck.lever@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Jon Grimm <jon.grimm@amd.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: linux-kernel <linux-kernel@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com | 21 October 2021, 19:52:12 UTC |
| 7e1c544 | Dave Airlie | 21 October 2021, 19:34:54 UTC | Merge tag 'drm-misc-fixes-2021-10-21-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.15-rc7: - Rebased, to remove vc4 patches. - Fix mxsfb crash on unload. - Use correct sync parameters for Feixin K101-IM2BYL02. - Assorted kmb modeset/atomic fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e66eaf89-b9b9-41f5-d0d2-dad7e59fabb5@linux.intel.com | 21 October 2021, 19:35:28 UTC |
| 730b64d | Dave Airlie | 21 October 2021, 19:22:10 UTC | Merge tag 'drm-msm-fixes-2021-10-18' of https://gitlab.freedesktop.org/drm/msm into drm-fixes One more fix for v5.15, to work around a power stability issue on a630 (and possibly others) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs1WPLthmd=ToDcEHm=u-7O38RAVJ2XwRoS8xPmC520vg@mail.gmail.com | 21 October 2021, 19:22:15 UTC |
| 397430b | Oliver Neukum | 21 October 2021, 12:29:44 UTC | usbnet: sanity check for maxpacket maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 21 October 2021, 13:44:53 UTC |
| e378f49 | Vladimir Oltean | 20 October 2021, 17:33:40 UTC | net: enetc: make sure all traffic classes can send large frames The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835946f ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn <richard.pearn@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 21 October 2021, 13:44:33 UTC |
| fb8dc5f | Vladimir Oltean | 20 October 2021, 16:52:06 UTC | net: enetc: fix ethtool counter name for PM0_TERR There are two counters named "MAC tx frames", one of them is actually incorrect. The correct name for that counter should be "MAC tx error frames", which is symmetric to the existing "MAC rx error frames". Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 21 October 2021, 13:44:23 UTC |
| b6b19a7 | Yang Yingliang | 21 October 2021, 09:13:53 UTC | ptp: free 'vclock_index' in ptp_clock_release() 'vclock_index' is accessed from sysfs, it shouled be freed in release function, so move it from ptp_clock_unregister() to ptp_clock_release(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 October 2021, 11:50:38 UTC |
| bf6abf3 | Erik Ekman | 19 October 2021, 22:40:16 UTC | sfc: Don't use netif_info before net_device setup Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 October 2021, 11:39:13 UTC |
| c62041c | Erik Ekman | 19 October 2021, 21:13:32 UTC | sfc: Export fibre-specific supported link modes The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 October 2021, 11:38:34 UTC |
| 1439caa | David S. Miller | 21 October 2021, 11:32:41 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter fixes for net: 1) Crash due to missing initialization of timer data in xt_IDLETIMER, from Juhee Kang. 2) NF_CONNTRACK_SECMARK should be bool in Kconfig, from Vegard Nossum. 3) Skip netdev events on netns removal, from Florian Westphal. 4) Add testcase to show port shadowing via UDP, also from Florian. 5) Remove pr_debug() code in ip6t_rt, this fixes a crash due to unsafe access to non-linear skbuff, from Xin Long. 6) Make net/ipv4/vs/debug_level read-only from non-init netns, from Antoine Tenart. 7) Remove bogus invocation to bash in selftests/netfilter/nft_flowtable.sh also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 21 October 2021, 11:32:41 UTC |
| e0bfcf9 | David S. Miller | 21 October 2021, 11:11:26 UTC | Merge tag 'mlx5-fixes-2021-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2021-10-20 ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 21 October 2021, 11:11:26 UTC |
| a689702 | David S. Miller | 21 October 2021, 11:10:29 UTC | Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-20 This series contains updates to e1000e, igc, and ice drivers. Sasha fixes an issue with dropped packets on Tiger Lake platforms for e1000e and corrects a device ID for igc. Tony adds missing E810 device IDs for ice. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 21 October 2021, 11:10:29 UTC |
| 7405609 | Anitha Chrisanthus | 07 June 2021, 21:17:11 UTC | drm/kmb: Enable ADV bridge after modeset On KMB, ADV bridge must be programmed and powered on prior to MIPI DSI HW initialization. v2: changed to atomic_bridge_chain_enable (Sam) Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> | 21 October 2021, 09:08:09 UTC |
| 004d271 | Anitha Chrisanthus | 19 July 2021, 23:28:51 UTC | drm/kmb: Corrected typo in handle_lcd_irq Check for Overflow bits for layer3 in the irq handler. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-5-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> | 21 October 2021, 09:08:09 UTC |
| 982f8ad | Edmund Dea | 06 October 2021, 23:03:48 UTC | drm/kmb: Disable change of plane parameters Due to HW limitations, KMB cannot change height, width, or pixel format after initial plane configuration. v2: removed memset disp_cfg as it is already zero. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> | 21 October 2021, 09:08:08 UTC |
| 13047a0 | Edmund Dea | 20 April 2021, 22:31:53 UTC | drm/kmb: Remove clearing DPHY regs Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during DSI initialization since this was causing MIPI Rx reset. Rest of the writes are bitwise, so will not affect Mipi Rx side. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> | 21 October 2021, 09:08:08 UTC |
| a79f40c | Anitha Chrisanthus | 08 January 2021, 22:34:13 UTC | drm/kmb: Limit supported mode to 1080p KMB only supports single resolution(1080p), this commit checks for 1920x1080x60 or 1920x1080x59 in crtc_mode_valid. Also, modes with vfp < 4 are not supported in KMB display. This change prunes display modes with vfp < 4. v2: added vfp check Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> | 21 October 2021, 09:08:08 UTC |
| 3e4c31e | Anitha Chrisanthus | 15 December 2020, 19:13:09 UTC | drm/kmb: Work around for higher system clock Use a different value for system clock offset in the ppl/llp ratio calculations for clocks higher than 500 Mhz. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-1-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> | 21 October 2021, 09:08:08 UTC |
| 7729706 | Dan Johansen | 18 August 2021, 21:48:18 UTC | drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel This adjusts sync values according to the datasheet Fixes: 1c243751c095 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel") Co-developed-by: Marius Gripsgard <marius@ubports.com> Signed-off-by: Dan Johansen <strit@manjaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> | 21 October 2021, 09:08:08 UTC |
| 3cfc183 | Marek Vasut | 16 October 2021, 21:04:46 UTC | drm: mxsfb: Fix NULL pointer dereference crash on unload The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ. Fixes: ae1ed00932819 ("drm: mxsfb: Stop using DRM simple display pipeline helper") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211016210446.171616-1-marex@denx.de Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> | 21 October 2021, 09:08:08 UTC |
| 2f111a6 | Linus Torvalds | 20 October 2021, 20:23:05 UTC | Merge tag 'ceph-for-5.15-rc7' of git://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "Two important filesystem fixes, marked for stable. The blocklisted superblocks issue was particularly annoying because for unexperienced users it essentially exacted a reboot to establish a new functional mount in that scenario" * tag 'ceph-for-5.15-rc7' of git://github.com/ceph/ceph-client: ceph: fix handling of "meta" errors ceph: skip existing superblocks that are blocklisted or shut down when mounting | 20 October 2021, 20:23:05 UTC |
| 515dcc2 | Linus Torvalds | 20 October 2021, 20:16:51 UTC | Merge tag 'dma-mapping-5.15-2' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - fix more dma-debug fallout (Gerald Schaefer, Hamza Mahfooz) - fix a kerneldoc warning (Logan Gunthorpe) * tag 'dma-mapping-5.15-2' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: teach add_dma_entry() about DMA_ATTR_SKIP_CPU_SYNC dma-debug: fix sg checks in debug_dma_map_sg() dma-mapping: fix the kerneldoc for dma_map_sgtable() | 20 October 2021, 20:16:51 UTC |
| 1d00032 | Emeel Hakim | 18 October 2021, 12:31:19 UTC | net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags Current Work Queue Entry (WQE) checksum (csum) flags in the ethernet segment (eseg) in case of IPsec crypto offload datapath are not aligned with PRM/HW expectations. Currently the driver always sets the l3_inner_csum flag in case of IPsec because of the wrong usage of skb->encapsulation as indicator for inner IPsec header since skb->encapsulation is always ON for IPsec packets since IPsec itself is an encapsulation protocol. The above forced a failing attempts of calculating csum of non-existing segments (like in the IP|ESP|TCP packet case which does not have an l3_inner) which led to lots of packet drops hence the low throughput. Fix by using xo->inner_ipproto as indicator for inner IPsec header instead of skb->encapsulation in addition to setting the csum flags as following: * Tunnel Mode: * Pkt: MAC IP ESP IP L4 * CSUM: l3_cs | l3_inner_cs | l4_inner_cs * * Transport Mode: * Pkt: MAC IP ESP L4 * CSUM: l3_cs [ | l4_cs (checksum partial case)] * * Tunnel(VXLAN TCP/UDP) over Transport Mode * Pkt: MAC IP ESP UDP VXLAN IP L4 * CSUM: l3_cs | l3_inner_cs | l4_inner_cs Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 20 October 2021, 17:42:51 UTC |
| d10457f | Emeel Hakim | 18 October 2021, 12:30:09 UTC | net/mlx5e: IPsec: Fix a misuse of the software parser's fields IPsec crypto offload current Software Parser (SWP) fields settings in the ethernet segment (eseg) are not aligned with PRM/HW expectations. Among others in case of IP|ESP|TCP packet, current driver sets the offsets for inner_l3 and inner_l4 although there is no inner l3/l4 headers relative to ESP header in such packets. SWP provides the offsets for HW ,so it can be used to find csum fields to offload the checksum, however these are not necessarily used by HW and are used as fallback in case HW fails to parse the packet, e.g when performing IPSec Transport Aware (IP | ESP | TCP) there is no need to add SW parse on inner packet. So in some cases packets csum was calculated correctly , whereas in other cases it failed. The later faced csum errors (caused by wrong packet length calculations) which led to lots of packet drops hence the low throughput. Fix by setting the SWP fields as expected in a IP|ESP|TCP packet. the following describe the expected SWP offsets: * Tunnel Mode: * SWP: OutL3 InL3 InL4 * Pkt: MAC IP ESP IP L4 * * Transport Mode: * SWP: OutL3 OutL4 * Pkt: MAC IP ESP L4 * * Tunnel(VXLAN TCP/UDP) over Transport Mode * SWP: OutL3 InL3 InL4 * Pkt: MAC IP ESP UDP VXLAN IP L4 Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 20 October 2021, 17:42:50 UTC |
| 68e66e1 | Moshe Shemesh | 02 October 2021, 08:15:35 UTC | net/mlx5e: Fix vlan data lost during suspend flow During suspend flow the driver calls mlx5e_destroy_vlan_table() which does not only delete the vlans steering flow rules, but also frees the data on currently active vlans, thus it is not restored during resume flow. This fix keeps the vlan data on suspend flow and frees it only on driver remove flow. Fixes: 6783f0a21a3c ("net/mlx5e: Dynamic alloc vlan table for netdev when needed") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 20 October 2021, 17:42:50 UTC |
| a6f7433 | Dmytro Linkin | 25 August 2021, 14:51:26 UTC | net/mlx5: E-switch, Return correct error code on group creation failure Dan Carpenter report: The patch f47e04eb96e0: "net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groups" from May 31, 2021, leads to the following Smatch static checker warning: drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c:483 esw_qos_create_rate_group() warn: passing zero to 'ERR_PTR' If min rate normalization failed then error code may be overwritten to 0 if scheduling element destruction succeed. Ignore this value and always return initial one. Fixes: f47e04eb96e0 ("net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groups") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 20 October 2021, 17:42:49 UTC |
| 14fe247 | Maor Dickman | 07 October 2021, 13:05:38 UTC | net/mlx5: Lag, change multipath and bonding to be mutually exclusive Both multipath and bonding events are changing the HW LAG state independently. Handling one of the features events while the other is already enabled can cause unwanted behavior, for example handling bonding event while multipath enabled will disable the lag and cause multipath to stop working. Fix it by ignoring bonding event while in multipath and ignoring FIB events while in bonding mode. Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> | 20 October 2021, 17:42:49 UTC |
| 8e37395 | Linus Torvalds | 20 October 2021, 16:13:22 UTC | Merge tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Again it became bigger than wished, unfortunately, as this contains quite a few ASoC fixes that came up a bit late. It also includes yet more HD- and USB-audio quirks: I decided to merge them now, as those are for stable, and we'll need them sooner or later. Although the volumes are a bit high, all changes are device-specific (and reasonably small) fixes, so it should be safe for the late rc" * tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Fix microphone sound on Jieli webcam. ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset ALSA: hda/realtek: Add quirk for Clevo PC50HS ALSA: usb-audio: add Schiit Hel device to quirk table ASoC: wm8960: Fix clock configuration on slave mode ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked() ASoC: codec: wcd938x: Add irq config support ASoC: DAPM: Fix missing kctl change notifications ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional() ASoC: Intel: bytcht_es8316: Use temporary variable for struct device ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata() ASoC: wcd938x: Fix jack detection issue ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working ASoC: cs4341: Add SPI device ID table ASoC: pcm179x: Add missing entries SPI to device ID table ASoC: fsl_xcvr: Fix channel swap issue with ARC ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers | 20 October 2021, 16:13:22 UTC |
| 6da52de | Linus Torvalds | 20 October 2021, 16:11:17 UTC | Merge tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fix from Paul Moore: "One small audit patch to add a pointer NULL check" * tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix possible null-pointer dereference in audit_filter_rules | 20 October 2021, 16:11:17 UTC |
| 7dcf78b | Tony Nguyen | 19 October 2021, 20:04:16 UTC | ice: Add missing E810 device ids As part of support for E810 XXV devices, some device ids were inadvertently left out. Add those missing ids. Fixes: 195fb97766da ("ice: add additional E810 device id") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> | 20 October 2021, 16:07:22 UTC |
| 79cc832 | Sasha Neftin | 09 September 2021, 17:49:04 UTC | igc: Update I226_K device ID The device ID for I226_K was incorrectly assigned, update the device ID to the correct one. Fixes: bfa5e98c9de4 ("igc: Add new device ID") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 20 October 2021, 16:07:21 UTC |
| 639e298 | Sasha Neftin | 22 September 2021, 06:55:42 UTC | e1000e: Fix packet loss on Tiger Lake and later Update the HW MAC initialization flow. Do not gate DMA clock from the modPHY block. Keeping this clock will prevent dropped packets sent in burst mode on the Kumeran interface. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213651 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213377 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 20 October 2021, 16:06:54 UTC |
| fc9b289 | Linus Torvalds | 20 October 2021, 16:02:58 UTC | Merge tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Recursion fix for tracing. While cleaning up some of the tracing recursion protection logic, I discovered a scenario that the current design would miss, and would allow an infinite recursion. Removing an optimization trick that opened the hole fixes the issue and cleans up the code as well" * tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have all levels of checks prevent recursion | 20 October 2021, 16:02:58 UTC |
| 1e59977 | Linus Torvalds | 20 October 2021, 15:56:51 UTC | Merge tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux Pull nios2 fix from Dinh Nguyen: - Renamed CTL_STATUS to CTL_FSTATUS to fix a redefined warning * tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: NIOS2: irqflags: rename a redefined register name | 20 October 2021, 15:56:51 UTC |
| 0afe64b | Linus Torvalds | 20 October 2021, 15:52:10 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Tools: - kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic x86: - clean ups and fixes for bus lock vmexit and lazy allocation of rmaps - two fixes for SEV-ES (one more coming as soon as I get reviews) - fix for static_key underflow ARM: - Properly refcount pages used as a concatenated stage-2 PGD - Fix missing unlock when detecting the use of MTE+VM_SHARED" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SEV-ES: reduce ghcb_sa_len to 32 bits KVM: VMX: Remove redundant handling of bus lock vmexit KVM: kvm_stat: do not show halt_wait_ns KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET" KVM: SEV-ES: Set guest_state_protected after VMSA update KVM: X86: fix lazy allocation of rmaps KVM: SEV-ES: fix length of string I/O KVM: arm64: Release mmap_lock when using VM_SHARED with MTE KVM: arm64: Report corrupted refcount at EL2 KVM: arm64: Fix host stage-2 PGD refcount KVM: s390: Function documentation fixes | 20 October 2021, 15:52:10 UTC |
| 280db5d | Sasha Neftin | 22 September 2021, 06:54:49 UTC | e1000e: Separate TGP board type from SPT We have the same LAN controller on different PCHs. Separate TGP board type from SPT which will allow for specific fixes to be applied for TGP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> | 20 October 2021, 15:51:51 UTC |
| 5ebcbe3 | Eric W. Biederman | 16 October 2021, 17:17:30 UTC | ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring Setting cred->ucounts in cred_alloc_blank does not make sense. The uid and user_ns are deliberately not set in cred_alloc_blank but instead the setting is delayed until key_change_session_keyring. So move dealing with ucounts into key_change_session_keyring as well. Unfortunately that movement of get_ucounts adds a new failure mode to key_change_session_keyring. I do not see anything stopping the parent process from calling setuid and changing the relevant part of it's cred while keyctl_session_to_parent is running making it fundamentally necessary to call get_ucounts in key_change_session_keyring. Which means that the new failure mode cannot be avoided. A failure of key_change_session_keyring results in a single threaded parent keeping it's existing credentials. Which results in the parent process not being able to access the session keyring and whichever keys are in the new keyring. Further get_ucounts is only expected to fail if the number of bits in the refernece count for the structure is too few. Since the code has no other way to report the failure of get_ucounts and because such failures are not expected to be common add a WARN_ONCE to report this problem to userspace. Between the WARN_ONCE and the parent process not having access to the keys in the new session keyring I expect any failure of get_ucounts will be noticed and reported and we can find another way to handle this condition. (Possibly by just making ucounts->count an atomic_long_t). Cc: stable@vger.kernel.org Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Link: https://lkml.kernel.org/r/7k0ias0uf.fsf_-_@disp2133 Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Alexey Gladkov <legion@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> | 20 October 2021, 15:34:20 UTC |
| 4225fea | Yang Yingliang | 20 October 2021, 08:18:34 UTC | ptp: Fix possible memory leak in ptp_clock_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release(). Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: a33121e5487b ("ptp: fix the race between the release of ptp_clock and cdev") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 October 2021, 13:44:33 UTC |
| 3cb9580 | Kurt Kanzenbach | 20 October 2021, 07:04:33 UTC | net: stmmac: Fix E2E delay mechanism When utilizing End to End delay mechanism, the following error messages show up: |root@ehl1:~# ptp4l --tx_timestamp_timeout=50 -H -i eno2 -E -m |ptp4l[950.573]: selected /dev/ptp3 as PTP clock |ptp4l[950.586]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[950.586]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[952.879]: port 1: new foreign master 001395.fffe.4897b4-1 |ptp4l[956.879]: selected best master clock 001395.fffe.4897b4 |ptp4l[956.879]: port 1: assuming the grand master role |ptp4l[956.879]: port 1: LISTENING to GRAND_MASTER on RS_GRAND_MASTER |ptp4l[962.017]: port 1: received DELAY_REQ without timestamp |ptp4l[962.273]: port 1: received DELAY_REQ without timestamp |ptp4l[963.090]: port 1: received DELAY_REQ without timestamp Commit f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") already addresses this problem for the dwmac v5.10. However, same holds true for all dwmacs above version v4.10. Correct the check accordingly. Afterwards everything works as expected. Tested on Intel Atom(R) x6414RE Processor. Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2") Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 October 2021, 13:43:53 UTC |
| 641e3fd | Uwe Kleine-König | 19 October 2021, 20:49:16 UTC | nfc: st95hf: Make spi remove() callback return zero If something goes wrong in the remove callback, returning an error code just results in an error message. The device still disappears. So don't skip disabling the regulator in st95hf_remove() if resetting the controller via spi fails. Also don't return an error code which just results in two error messages. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 October 2021, 13:41:20 UTC |
| 323e9a9 | David S. Miller | 20 October 2021, 10:38:11 UTC | Merge branch 'hns3-fixes' Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 20 October 2021, 10:38:11 UTC |
| 0dd8a25 | Peng Li | 19 October 2021, 14:16:35 UTC | net: hns3: disable sriov before unload hclge layer HNS3 driver includes hns3.ko, hnae3.ko and hclge.ko. hns3.ko includes network stack and pci_driver, hclge.ko includes HW device action, algo_ops and timer task, hnae3.ko includes some register function. When SRIOV is enable and hclge.ko is removed, HW device is unloaded but VF still exists, PF will not reply VF mbx messages, and cause errors. This patch fix it by disable SRIOV before remove hclge.ko. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 October 2021, 10:38:11 UTC |
| 1385cc8 | Yufeng Mo | 19 October 2021, 14:16:34 UTC | net: hns3: fix vf reset workqueue cannot exit The task of VF reset is performed through the workqueue. It checks the value of hdev->reset_pending to determine whether to exit the loop. However, the value of hdev->reset_pending may also be assigned by the interrupt function hclgevf_misc_irq_handle(), which may cause the loop fail to exit and keep occupying the workqueue. This loop is not necessary, so remove it and the workqueue will be rescheduled if the reset needs to be retried or a new reset occurs. Fixes: 1cc9bc6e5867 ("net: hns3: split hclgevf_reset() into preparing and rebuilding part") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 October 2021, 10:38:11 UTC |
| 68752b2 | Yunsheng Lin | 19 October 2021, 14:16:33 UTC | net: hns3: schedule the polling again when allocation fails Currently when there is a rx page allocation failure, it is possible that polling may be stopped if there is no more packet to be reveiced, which may cause queue stall problem under memory pressure. This patch makes sure polling is scheduled again when there is any rx page allocation failure, and polling will try to allocate receive buffers until it succeeds. Now the allocation retry is added, it is unnecessary to do the rx page allocation at the end of rx cleaning, so remove it. And reset the unused_count to zero after calling hns3_nic_alloc_rx_buffers() to avoid calling hns3_nic_alloc_rx_buffers() repeatedly under memory pressure. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 20 October 2021, 10:38:11 UTC |
