Revision 033369d1af1264abc23bea2e174aa47cdd212f6f authored by Artem Bityutskiy on 01 June 2012, 14:18:08 UTC, committed by Al Viro on 01 June 2012, 14:37:36 UTC
This patch stops reiserfs using the VFS 'write_super()' method along with the s_dirt flag, because they are on their way out. The whole "superblock write-out" VFS infrastructure is served by the 'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and writes out all dirty superblock using the '->write_super()' call-back. But the problem with this thread is that it wastes power by waking up the system every 5 seconds, even if there are no diry superblocks, or there are no client file-systems which would need this (e.g., btrfs does not use '->write_super()'). So we want to kill it completely and thus, we need to make file-systems to stop using the '->write_super()' VFS service, and then remove it together with the kernel thread. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1 parent 5c5fd81
pinctrl-imx.h
/*
* IMX pinmux core definitions
*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
* Copyright (C) 2012 Linaro Ltd.
*
* Author: Dong Aisheng <dong.aisheng@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __DRIVERS_PINCTRL_IMX_H
#define __DRIVERS_PINCTRL_IMX_H
struct platform_device;
/**
* struct imx_pin_group - describes an IMX pin group
* @name: the name of this specific pin group
* @pins: an array of discrete physical pins used in this group, taken
* from the driver-local pin enumeration space
* @npins: the number of pins in this group array, i.e. the number of
* elements in .pins so we can iterate over that array
* @mux_mode: the mux mode for each pin in this group. The size of this
* array is the same as pins.
* @configs: the config for each pin in this group. The size of this
* array is the same as pins.
*/
struct imx_pin_group {
const char *name;
unsigned int *pins;
unsigned npins;
unsigned int *mux_mode;
unsigned long *configs;
};
/**
* struct imx_pmx_func - describes IMX pinmux functions
* @name: the name of this specific function
* @groups: corresponding pin groups
* @num_groups: the number of groups
*/
struct imx_pmx_func {
const char *name;
const char **groups;
unsigned num_groups;
};
/**
* struct imx_pin_reg - describe a pin reg map
* The last 3 members are used for select input setting
* @pid: pin id
* @mux_reg: mux register offset
* @conf_reg: config register offset
* @mux_mode: mux mode
* @input_reg: select input register offset for this mux if any
* 0 if no select input setting needed.
* @input_val: the value set to select input register
*/
struct imx_pin_reg {
u16 pid;
u16 mux_reg;
u16 conf_reg;
u8 mux_mode;
u16 input_reg;
u8 input_val;
};
struct imx_pinctrl_soc_info {
struct device *dev;
const struct pinctrl_pin_desc *pins;
unsigned int npins;
const struct imx_pin_reg *pin_regs;
unsigned int npin_regs;
struct imx_pin_group *groups;
unsigned int ngroups;
struct imx_pmx_func *functions;
unsigned int nfunctions;
};
#define NO_MUX 0x0
#define NO_PAD 0x0
#define IMX_PIN_REG(id, conf, mux, mode, input, val) \
{ \
.pid = id, \
.conf_reg = conf, \
.mux_reg = mux, \
.mux_mode = mode, \
.input_reg = input, \
.input_val = val, \
}
#define IMX_PINCTRL_PIN(pin) PINCTRL_PIN(pin, #pin)
#define PAD_CTL_MASK(len) ((1 << len) - 1)
#define IMX_MUX_MASK 0x7
#define IOMUXC_CONFIG_SION (0x1 << 4)
int imx_pinctrl_probe(struct platform_device *pdev,
struct imx_pinctrl_soc_info *info);
int imx_pinctrl_remove(struct platform_device *pdev);
#endif /* __DRIVERS_PINCTRL_IMX_H */
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...