Revision 043d1e729b0fbaf2b69386fe45290b8a9a18a6a9 authored by Eugeniy Paltsev on 06 September 2017, 18:21:08 UTC, committed by Vineet Gupta on 04 October 2017, 03:36:49 UTC
DW ethernet controller on AXS10x hangs sometimes after SW reset, so
add temporary quirk to reset DW ethernet controller IP core.
This quirk can be removed after axs10x reset driver
(see http://patchwork.ozlabs.org/patch/800273/)
or simple reset driver
(see https://patchwork.kernel.org/patch/9903375/)
will be available in upstream.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
1 parent 9e66317
Raw File
blk-timeout.c
/*
 * Functions related to generic timeout handling of requests.
 */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/fault-inject.h>

#include "blk.h"
#include "blk-mq.h"

#ifdef CONFIG_FAIL_IO_TIMEOUT

static DECLARE_FAULT_ATTR(fail_io_timeout);

static int __init setup_fail_io_timeout(char *str)
{
	return setup_fault_attr(&fail_io_timeout, str);
}
__setup("fail_io_timeout=", setup_fail_io_timeout);

int blk_should_fake_timeout(struct request_queue *q)
{
	if (!test_bit(QUEUE_FLAG_FAIL_IO, &q->queue_flags))
		return 0;

	return should_fail(&fail_io_timeout, 1);
}

static int __init fail_io_timeout_debugfs(void)
{
	struct dentry *dir = fault_create_debugfs_attr("fail_io_timeout",
						NULL, &fail_io_timeout);

	return PTR_ERR_OR_ZERO(dir);
}

late_initcall(fail_io_timeout_debugfs);

ssize_t part_timeout_show(struct device *dev, struct device_attribute *attr,
			  char *buf)
{
	struct gendisk *disk = dev_to_disk(dev);
	int set = test_bit(QUEUE_FLAG_FAIL_IO, &disk->queue->queue_flags);

	return sprintf(buf, "%d\n", set != 0);
}

ssize_t part_timeout_store(struct device *dev, struct device_attribute *attr,
			   const char *buf, size_t count)
{
	struct gendisk *disk = dev_to_disk(dev);
	int val;

	if (count) {
		struct request_queue *q = disk->queue;
		char *p = (char *) buf;

		val = simple_strtoul(p, &p, 10);
		spin_lock_irq(q->queue_lock);
		if (val)
			queue_flag_set(QUEUE_FLAG_FAIL_IO, q);
		else
			queue_flag_clear(QUEUE_FLAG_FAIL_IO, q);
		spin_unlock_irq(q->queue_lock);
	}

	return count;
}

#endif /* CONFIG_FAIL_IO_TIMEOUT */

/*
 * blk_delete_timer - Delete/cancel timer for a given function.
 * @req:	request that we are canceling timer for
 *
 */
void blk_delete_timer(struct request *req)
{
	list_del_init(&req->timeout_list);
}

static void blk_rq_timed_out(struct request *req)
{
	struct request_queue *q = req->q;
	enum blk_eh_timer_return ret = BLK_EH_RESET_TIMER;

	if (q->rq_timed_out_fn)
		ret = q->rq_timed_out_fn(req);
	switch (ret) {
	case BLK_EH_HANDLED:
		__blk_complete_request(req);
		break;
	case BLK_EH_RESET_TIMER:
		blk_add_timer(req);
		blk_clear_rq_complete(req);
		break;
	case BLK_EH_NOT_HANDLED:
		/*
		 * LLD handles this for now but in the future
		 * we can send a request msg to abort the command
		 * and we can move more of the generic scsi eh code to
		 * the blk layer.
		 */
		break;
	default:
		printk(KERN_ERR "block: bad eh return: %d\n", ret);
		break;
	}
}

static void blk_rq_check_expired(struct request *rq, unsigned long *next_timeout,
			  unsigned int *next_set)
{
	if (time_after_eq(jiffies, rq->deadline)) {
		list_del_init(&rq->timeout_list);

		/*
		 * Check if we raced with end io completion
		 */
		if (!blk_mark_rq_complete(rq))
			blk_rq_timed_out(rq);
	} else if (!*next_set || time_after(*next_timeout, rq->deadline)) {
		*next_timeout = rq->deadline;
		*next_set = 1;
	}
}

void blk_timeout_work(struct work_struct *work)
{
	struct request_queue *q =
		container_of(work, struct request_queue, timeout_work);
	unsigned long flags, next = 0;
	struct request *rq, *tmp;
	int next_set = 0;

	if (blk_queue_enter(q, true))
		return;
	spin_lock_irqsave(q->queue_lock, flags);

	list_for_each_entry_safe(rq, tmp, &q->timeout_list, timeout_list)
		blk_rq_check_expired(rq, &next, &next_set);

	if (next_set)
		mod_timer(&q->timeout, round_jiffies_up(next));

	spin_unlock_irqrestore(q->queue_lock, flags);
	blk_queue_exit(q);
}

/**
 * blk_abort_request -- Request request recovery for the specified command
 * @req:	pointer to the request of interest
 *
 * This function requests that the block layer start recovery for the
 * request by deleting the timer and calling the q's timeout function.
 * LLDDs who implement their own error recovery MAY ignore the timeout
 * event if they generated blk_abort_req. Must hold queue lock.
 */
void blk_abort_request(struct request *req)
{
	if (blk_mark_rq_complete(req))
		return;

	if (req->q->mq_ops) {
		blk_mq_rq_timed_out(req, false);
	} else {
		blk_delete_timer(req);
		blk_rq_timed_out(req);
	}
}
EXPORT_SYMBOL_GPL(blk_abort_request);

unsigned long blk_rq_timeout(unsigned long timeout)
{
	unsigned long maxt;

	maxt = round_jiffies_up(jiffies + BLK_MAX_TIMEOUT);
	if (time_after(timeout, maxt))
		timeout = maxt;

	return timeout;
}

/**
 * blk_add_timer - Start timeout timer for a single request
 * @req:	request that is about to start running.
 *
 * Notes:
 *    Each request has its own timer, and as it is added to the queue, we
 *    set up the timer. When the request completes, we cancel the timer.
 */
void blk_add_timer(struct request *req)
{
	struct request_queue *q = req->q;
	unsigned long expiry;

	if (!q->mq_ops)
		lockdep_assert_held(q->queue_lock);

	/* blk-mq has its own handler, so we don't need ->rq_timed_out_fn */
	if (!q->mq_ops && !q->rq_timed_out_fn)
		return;

	BUG_ON(!list_empty(&req->timeout_list));

	/*
	 * Some LLDs, like scsi, peek at the timeout to prevent a
	 * command from being retried forever.
	 */
	if (!req->timeout)
		req->timeout = q->rq_timeout;

	req->deadline = jiffies + req->timeout;

	/*
	 * Only the non-mq case needs to add the request to a protected list.
	 * For the mq case we simply scan the tag map.
	 */
	if (!q->mq_ops)
		list_add_tail(&req->timeout_list, &req->q->timeout_list);

	/*
	 * If the timer isn't already pending or this timeout is earlier
	 * than an existing one, modify the timer. Round up to next nearest
	 * second.
	 */
	expiry = blk_rq_timeout(round_jiffies_up(req->deadline));

	if (!timer_pending(&q->timeout) ||
	    time_before(expiry, q->timeout.expires)) {
		unsigned long diff = q->timeout.expires - expiry;

		/*
		 * Due to added timer slack to group timers, the timer
		 * will often be a little in front of what we asked for.
		 * So apply some tolerance here too, otherwise we keep
		 * modifying the timer because expires for value X
		 * will be X + something.
		 */
		if (!timer_pending(&q->timeout) || (diff >= HZ / 2))
			mod_timer(&q->timeout, expiry);
	}

}
back to top