06c1088 | Russell King | 12 October 2010, 23:15:25 UTC | ARM: relax ioremap prohibition (309caa9) for -final and -stable ... but produce a big warning about the problem as encouragement for people to fix their drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2010, 23:19:03 UTC |
841f48a | Russell King | 12 October 2010, 21:43:26 UTC | Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 | 12 October 2010, 21:43:36 UTC |
10d48b3 | Mika Westerberg | 12 October 2010, 09:37:59 UTC | ARM: 6440/1: ep93xx: DMA: fix channel_disable When channel_disable() is called, it disables per channel interrupts and waits until channels state becomes STATE_STALL, and then disables the channel. Now, if the DMA transfer is disabled while the channel is in STATE_NEXT we will not wait anything and disable the channel immediately. This seems to cause weird data corruption for example in audio transfers. Fix is to wait while we are in STATE_NEXT or STATE_ON and only then disable the channel. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 12 October 2010, 21:43:19 UTC |
4793ca4 | Eric Bénard | 08 October 2010, 08:37:41 UTC | cpuimx27: fix i2c bus selection Recent clean of i.MX devices registration changed the i2C bus number selected for our platform (Freescale start peripheral ID at 1, kernel now start it at 0 so i.MX27's i2c 1 is kernel's i2c 0). Without this fix, i2c is unusable on this platform. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | 08 October 2010, 13:08:41 UTC |
22377ec | Eric Bénard | 08 October 2010, 08:37:40 UTC | cpuimx27: fix compile when ULPI is selected without this patch we get : arch/arm/mach-imx/built-in.o: In function `eukrea_cpuimx27_init': eukrea_mbimx27-baseboard.c:(.init.text+0x44c): undefined reference to `mxc_ulpi_access_ops' Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | 08 October 2010, 13:08:41 UTC |
c0bb586 | Tony Lindgren | 07 October 2010, 18:34:04 UTC | ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9 Commit 14eff1812679c76564b775aa95cdd378965f6cfb added proper detection for ARM11MPCore/Cortex-A9 instead of detecting them as ARMv7. However, it was missing the HWCAP_TLS flags. HWCAP_TLS is needed if support for earlier ARMv6 is compiled into the same kernel. Without HWCAP_TLS flags the userspace won't work unless nosmp is specified: Kernel panic - not syncing: Attempted to kill init! CPU0: stopping <c005d5e4>] (unwind_backtrace+0x0/0xec) from [<c004c2f8>] (do_IPI+0xfc/0x184) <c004c2f8>] (do_IPI+0xfc/0x184) from [<c03f25bc>] (__irq_svc+0x9c/0x160) Exception stack(0xc0565f80 to 0xc0565fc8) 5f80: 00000001 c05772a0 00000000 00003a61 c0564000 c05cf500 c003603c c0578600 5fa0: 80033ef0 410fc091 0000001f 00000000 00000000 c0565fc8 c00b91f8 c0057cb4 5fc0: 20000013 ffffffff [<c03f25bc>] (__irq_svc+0x9c/0x160) from [<c0057cb4>] (default_idle+0x30/0x38) [<c0057cb4>] (default_idle+0x30/0x38) from [<c005829c>] (cpu_idle+0x9c/0xf8) [<c005829c>] (cpu_idle+0x9c/0xf8) from [<c0008d48>] (start_kernel+0x2a4/0x300) [<c0008d48>] (start_kernel+0x2a4/0x300) from [<80008084>] (0x80008084) Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 08 October 2010, 09:01:23 UTC |
5c18920 | Anders Larsen | 07 October 2010, 19:44:15 UTC | ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors According to Atmel, their 926T processors (AT91 post RM9200) requires 'Wait for Interrupt' mode be entered right after disabling the processor clock in order to minimise current consumption when idle, so do both provided we're not running on a 920T (an RM9200). Furthermore, get rid of the #ifndef CONFIG_DEBUG_KERNEL, since arch_idle() can be turned off completely with the kernel parameter 'nohlt'. Cc: Andrew Victor <avictor.za@gmail.com> Signed-off-by: Anders Larsen <al@alarsen.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 08 October 2010, 09:00:36 UTC |
cdaf9a2 | Russell King | 05 October 2010, 10:29:28 UTC | ARM: fix section mismatch warnings in Versatile Express WARNING: vmlinux.o(.text+0xbf30): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clocksource_init() The function v2m_timer_init() references the function __init sp804_clocksource_init(). This is often because v2m_timer_init lacks a __init annotation or the annotation of sp804_clocksource_init is wrong. WARNING: vmlinux.o(.text+0xbf3c): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clockevents_init() The function v2m_timer_init() references the function __init sp804_clockevents_init(). This is often because v2m_timer_init lacks a __init annotation or the annotation of sp804_clockevents_init is wrong. WARNING: vmlinux.o(.text+0xc524): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:l2x0_init() The function ct_ca9x4_init() references the function __init l2x0_init(). This is often because ct_ca9x4_init lacks a __init annotation or the annotation of l2x0_init is wrong. WARNING: vmlinux.o(.text+0xc530): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:clkdev_add_table() The function ct_ca9x4_init() references the function __init clkdev_add_table(). This is often because ct_ca9x4_init lacks a __init annotation or the annotation of clkdev_add_table is wrong. WARNING: vmlinux.o(.text+0xc578): Section mismatch in reference from the function ct_ca9x4_init() to the (unknown reference) .init.data:(unknown) The function ct_ca9x4_init() references the (unknown reference) __initdata (unknown). This is often because ct_ca9x4_init lacks a __initdata annotation or the annotation of (unknown) is wrong. Fix these by making ct_ca9x4_init() and v2m_timer_init() both __init. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 05 October 2010, 10:30:40 UTC |
ccdf2e1 | Will Deacon | 27 September 2010, 17:12:12 UTC | ARM: 6412/1: kprobes-decode: add support for MOVW instruction The MOVW instruction moves a 16-bit immediate into the bottom halfword of the destination register. This patch ensures that kprobes leaves the 16-bit immediate intact, rather than assume a 12-bit immediate and mask out the upper 4 bits. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 04 October 2010, 18:21:37 UTC |
7f58217 | Santosh Shilimkar | 30 September 2010, 08:02:17 UTC | ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags The commit f1a2481c0 sets up the default flags for MT_MEMORY and MT_MEMORY_NONCACHED memory types. L_PTE_USER flag is wrongly set as default for these entries so remove it. Also adding the 'L_PTE_WRITE' flag so that these pages become read-write instead of just being read-only [this stops them being exposed to userspace, which is the main concern here --rmk] Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 04 October 2010, 18:20:18 UTC |
475d92f | Will Deacon | 28 September 2010, 13:02:02 UTC | ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption On the r2p0, r2p1 and r2p2 versions of the Cortex-A9, data corruption can occur under very rare conditions due to a store buffer optimisation. This workaround sets a bit in the diagnostic register of the Cortex-A9, disabling the optimisation and preventing the problem from occurring. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 04 October 2010, 18:20:14 UTC |
c6ea21e | Linus Torvalds | 01 October 2010, 22:03:37 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: prevent infinite recursion in cifs_reconnect_tcon cifs: set backing_dev_info on new S_ISREG inodes | 01 October 2010, 22:03:37 UTC |
f4a3330 | Linus Torvalds | 01 October 2010, 22:02:41 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hpet: Fix bogus error check in hpet_assign_irq() x86, irq: Plug memory leak in sparse irq x86, cpu: After uncapping CPUID, re-run CPU feature detection | 01 October 2010, 22:02:41 UTC |
57cf4f7 | David Howells | 01 October 2010, 09:31:03 UTC | MN10300: Fix flush_icache_range() flush_icache_range() is given virtual addresses to describe the region. It deals with these by attempting to translate them through the current set of page tables. This is fine for userspace memory and vmalloc()'d areas as they are governed by page tables. However, since the regions above 0x80000000 aren't translated through the page tables by the MMU, the kernel doesn't bother to set up page tables for them (see paging_init()). This means flush_icache_range() as it stands cannot be used to flush regions of the VM area between 0x80000000 and 0x9fffffff where the kernel resides if the data cache is operating in WriteBack mode. To fix this, make flush_icache_range() first check for addresses in the upper half of VM space and deal with them appropriately, before dealing with any range in the page table mapped area. Ordinarily, this is not a problem, but it has the capacity to make kprobes and kgdb malfunction. It should not affect gdbstub, signal frame setup or module loading as gdb has its own flush functions, and the others take place in the page table mapped area only. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 22:01:47 UTC |
18ffe4b | Linus Torvalds | 01 October 2010, 17:58:31 UTC | Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: vmwgfx: Fix fb VRAM pinning failure due to fragmentation vmwgfx: Remove initialisation of dev::devname vmwgfx: Enable use of the vblank system vmwgfx: vt-switch (master drop) fixes drm/vmwgfx: Fix breakage introduced by commit "drm: block userspace under allocating buffer and having drivers overwrite it (v2)" drm: Hold the mutex when dropping the last GEM reference (v2) drm/gem: handlecount isn't really a kref so don't make it one. drm: i810/i830: fix locked ioctl variant drm/radeon/kms: add quirk for MSI K9A2GM motherboard drm/radeon/kms: fix potential segfault in r600_ioctl_wait_idle drm: Prune GEM vma entries drm/radeon/kms: fix up encoder info messages for DFP6 drm/radeon: fix PCI ID 5657 to be an RV410 | 01 October 2010, 17:58:31 UTC |
b10c4d4 | Linus Torvalds | 01 October 2010, 17:55:54 UTC | Merge branch 'for-linus/i2c/2636-rc5' of git://git.fluff.org/bjdooks/linux * 'for-linus/i2c/2636-rc5' of git://git.fluff.org/bjdooks/linux: i2c-s3c2410: fix calculation of SDA line delay i2c-davinci: Fix race when setting up for TX i2c-octeon: Return -ETIMEDOUT in octeon_i2c_wait() on timeout | 01 October 2010, 17:55:54 UTC |
303a407 | Linus Torvalds | 01 October 2010, 17:54:58 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: invoke DSDT corruption workaround on all Toshiba Satellite ACPI, APEI, Fix ERST MOVE_DATA instruction implementation ACPI: fan: Fix more unbalanced code block ACPI: acpi_pad: simplify code to avoid false gcc build warning ACPI, APEI, Fix error path for memory allocation ACPI, APEI, HEST Fix the unsuitable usage of platform_data ACPI, APEI, Fix acpi_pre_map() return value ACPI, APEI, Fix APEI related table size checking ACPI: Disable Windows Vista compatibility for Toshiba P305D ACPI: Kconfig: fix typo. ACPI: add missing __percpu markup in arch/x86/kernel/acpi/cstate.c ACPI: Fix typos ACPI video: fix a poor warning message ACPI: fix build warnings resulting from merge window conflict ACPI: EC: add Vista incompatibility DMI entry for Toshiba Satellite L355 ACPI: expand Vista blacklist to include SP1 and SP2 ACPI: delete ZEPTO idle=nomwait DMI quirk ACPI: enable repeated PCIEXP wakeup by clearing PCIEXP_WAKE_STS on resume PM / ACPI: Blacklist systems known to require acpi_sleep=nonvs ACPI: Don't report current_now if battery reports in mWh | 01 October 2010, 17:54:58 UTC |
35ec421 | Linus Torvalds | 01 October 2010, 17:53:45 UTC | Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: Voluntary leave_mm before entering deeper acpi_idle: add missing \n to printk intel_idle: add missing __percpu markup intel_idle: Change mode 755 => 644 cpuidle: Fix typos intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hang | 01 October 2010, 17:53:45 UTC |
3c72908 | Linus Torvalds | 01 October 2010, 17:53:06 UTC | Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: McBSP: tx_irq_completion used in rx_irq_handler omap: Fix compile dependency to LEDS_CLASS | 01 October 2010, 17:53:06 UTC |
9d8117e | Frederic Weisbecker | 30 September 2010, 22:15:38 UTC | reiserfs: fix unwanted reiserfs lock recursion Prevent from recursively locking the reiserfs lock in reiserfs_unpack() because we may call journal_begin() that requires the lock to be taken only once, otherwise it won't be able to release the lock while taking other mutexes, ending up in inverted dependencies between the journal mutex and the reiserfs lock for example. This fixes: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.35.4.4a #3 ------------------------------------------------------- lilo/1620 is trying to acquire lock: (&journal->j_mutex){+.+...}, at: [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs] but task is already holding lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [<c10562b7>] lock_acquire+0x67/0x80 [<c12facad>] __mutex_lock_common+0x4d/0x410 [<c12fb0c8>] mutex_lock_nested+0x18/0x20 [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs] [<d0325c06>] do_journal_begin_r+0x86/0x340 [reiserfs] [<d0325f77>] journal_begin+0x77/0x140 [reiserfs] [<d0315be4>] reiserfs_remount+0x224/0x530 [reiserfs] [<c10b6a20>] do_remount_sb+0x60/0x110 [<c10cee25>] do_mount+0x625/0x790 [<c10cf014>] sys_mount+0x84/0xb0 [<c12fca3d>] syscall_call+0x7/0xb -> #0 (&journal->j_mutex){+.+...}: [<c10560f6>] __lock_acquire+0x1026/0x1180 [<c10562b7>] lock_acquire+0x67/0x80 [<c12facad>] __mutex_lock_common+0x4d/0x410 [<c12fb0c8>] mutex_lock_nested+0x18/0x20 [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs] [<d0325f77>] journal_begin+0x77/0x140 [reiserfs] [<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs] [<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs] [<c10db9db>] __block_prepare_write+0x1bb/0x3a0 [<c10dbbe6>] block_prepare_write+0x26/0x40 [<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs] [<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs] [<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3188>] vfs_ioctl+0x28/0xa0 [<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3eb3>] sys_ioctl+0x63/0x70 [<c12fca3d>] syscall_call+0x7/0xb other info that might help us debug this: 2 locks held by lilo/1620: #0: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d032945a>] reiserfs_unpack+0x6a/0x120 [reiserfs] #1: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs] stack backtrace: Pid: 1620, comm: lilo Not tainted 2.6.35.4.4a #3 Call Trace: [<c10560f6>] __lock_acquire+0x1026/0x1180 [<c10562b7>] lock_acquire+0x67/0x80 [<c12facad>] __mutex_lock_common+0x4d/0x410 [<c12fb0c8>] mutex_lock_nested+0x18/0x20 [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs] [<d0325f77>] journal_begin+0x77/0x140 [reiserfs] [<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs] [<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs] [<c10db9db>] __block_prepare_write+0x1bb/0x3a0 [<c10dbbe6>] block_prepare_write+0x26/0x40 [<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs] [<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs] [<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3188>] vfs_ioctl+0x28/0xa0 [<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3eb3>] sys_ioctl+0x63/0x70 [<c12fca3d>] syscall_call+0x7/0xb Reported-by: Jarek Poplawski <jarkao2@gmail.com> Tested-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: All since 2.6.32 <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:59 UTC |
3f259d0 | Frederic Weisbecker | 30 September 2010, 22:15:37 UTC | reiserfs: fix dependency inversion between inode and reiserfs mutexes The reiserfs mutex already depends on the inode mutex, so we can't lock the inode mutex in reiserfs_unpack() without using the safe locking API, because reiserfs_unpack() is always called with the reiserfs mutex locked. This fixes: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.35c #13 ------------------------------------------------------- lilo/1606 is trying to acquire lock: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs] but task is already holding lock: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&REISERFS_SB(s)->lock){+.+.+.}: [<c1056347>] lock_acquire+0x67/0x80 [<c12f083d>] __mutex_lock_common+0x4d/0x410 [<c12f0c58>] mutex_lock_nested+0x18/0x20 [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs] [<d0329e9a>] reiserfs_lookup_privroot+0x2a/0x90 [reiserfs] [<d0316b81>] reiserfs_fill_super+0x941/0xe60 [reiserfs] [<c10b7d17>] get_sb_bdev+0x117/0x170 [<d0313e21>] get_super_block+0x21/0x30 [reiserfs] [<c10b74ba>] vfs_kern_mount+0x6a/0x1b0 [<c10b7659>] do_kern_mount+0x39/0xe0 [<c10cebe0>] do_mount+0x340/0x790 [<c10cf0b4>] sys_mount+0x84/0xb0 [<c12f25cd>] syscall_call+0x7/0xb -> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}: [<c1056186>] __lock_acquire+0x1026/0x1180 [<c1056347>] lock_acquire+0x67/0x80 [<c12f083d>] __mutex_lock_common+0x4d/0x410 [<c12f0c58>] mutex_lock_nested+0x18/0x20 [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs] [<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3228>] vfs_ioctl+0x28/0xa0 [<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3f53>] sys_ioctl+0x63/0x70 [<c12f25cd>] syscall_call+0x7/0xb other info that might help us debug this: 1 lock held by lilo/1606: #0: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs] stack backtrace: Pid: 1606, comm: lilo Not tainted 2.6.35c #13 Call Trace: [<c1056186>] __lock_acquire+0x1026/0x1180 [<c1056347>] lock_acquire+0x67/0x80 [<c12f083d>] __mutex_lock_common+0x4d/0x410 [<c12f0c58>] mutex_lock_nested+0x18/0x20 [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs] [<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs] [<c10c3228>] vfs_ioctl+0x28/0xa0 [<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0 [<c10c3f53>] sys_ioctl+0x63/0x70 [<c12f25cd>] syscall_call+0x7/0xb Reported-by: Jarek Poplawski <jarkao2@gmail.com> Tested-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: <stable@kernel.org> [2.6.32 and later] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:59 UTC |
f556cb0 | Kukjin Kim | 30 September 2010, 22:15:35 UTC | MAINTAINERS: update maintainer for S5P ARM ARCHITECTURES Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Kyungmin Park <kmpark@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:59 UTC |
5265319 | Petr Vandrovec | 30 September 2010, 22:15:34 UTC | MAINTAINERS: update matroxfb & ncpfs status I moved couple years ago, so let's update my email and snail mail. And I do not have any access to Matrox hardware anymore, and I'm quite unresponsive to matroxfb bug reports (sorry Alan), so saying that I'm maintainer is a bit far fetched. For ncpfs I do not use ncpfs in my daily life either, but at least I can test that one, so I can stay listed here for odd fixes. Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:59 UTC |
3036e7b | Jiri Olsa | 30 September 2010, 22:15:33 UTC | proc: make /proc/pid/limits world readable Having the limits file world readable will ease the task of system management on systems where root privileges might be restricted. Having admin restricted with root priviledges, he/she could not check other users process' limits. Also it'd align with most of the /proc stat files. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Eugene Teo <eugene@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:59 UTC |
f015ac3 | Don Mullis | 30 September 2010, 22:15:32 UTC | lib/list_sort: do not pass bad pointers to cmp callback If the original list is a POT in length, the first callback from line 73 will pass a==b both pointing to the original list_head. This is dangerous because the 'list_sort()' user can use 'container_of()' and accesses the "containing" object, which does not necessary exist for the list head. So the user can access RAM which does not belong to him. If this is a write access, we can end up with memory corruption. Signed-off-by: Don Mullis <don.mullis@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:58 UTC |
982f7c2 | Dan Rosenberg | 30 September 2010, 22:15:31 UTC | sys_semctl: fix kernel stack leakage The semctl syscall has several code paths that lead to the leakage of uninitialized kernel stack memory (namely the IPC_INFO, SEM_INFO, IPC_STAT, and SEM_STAT commands) during the use of the older, obsolete version of the semid_ds struct. The copy_semid_to_user() function declares a semid_ds struct on the stack and copies it back to the user without initializing or zeroing the "sem_base", "sem_pending", "sem_pending_last", and "undo" pointers, allowing the leakage of 16 bytes of kernel stack memory. The code is still reachable on 32-bit systems - when calling semctl() newer glibc's automatically OR the IPC command with the IPC_64 flag, but invoking the syscall directly allows users to use the older versions of the struct. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:58 UTC |
64aab72 | Marcin Slusarz | 30 September 2010, 22:15:30 UTC | i7core_edac: fix panic in udimm sysfs attributes registration Array of udimm sysfs attributes was not ended with NULL marker, leading to dereference of random memory. EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm0 EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm1 EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm2 BUG: unable to handle kernel NULL pointer dereference at 00000000000001a4 IP: [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1 Pid: 1, comm: swapper Not tainted 2.6.36-rc3-nv+ #483 P6T SE/System Product Name RIP: 0010:[<ffffffff81330b36>] [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1 (...) Call Trace: [<ffffffff81330b86>] edac_create_mci_instance_attributes+0x198/0x1f1 [<ffffffff81330c9a>] edac_create_sysfs_mci_device+0xbb/0x2b2 [<ffffffff8132f533>] edac_mc_add_mc+0x46b/0x557 [<ffffffff81428901>] i7core_probe+0xccf/0xec0 RIP [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1 ---[ end trace 20de320855b81d78 ]--- Kernel panic - not syncing: Attempted to kill init! Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Doug Thompson <dougthompson@xmission.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:58 UTC |
c044391 | Andrew Morton | 30 September 2010, 22:15:29 UTC | drivers/serial/mrst_max3110.c needs linux/irq.h sparc64 allmodconfig: drivers/serial/mrst_max3110.c: In function `serial_m3110_startup': drivers/serial/mrst_max3110.c:470: error: `IRQ_TYPE_EDGE_FALLING' undeclared (first use in this function) Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:58 UTC |
e53ced1 | Andrew Morton | 30 September 2010, 22:15:29 UTC | arch/m68k/mac/macboing.c: use unsigned long for irqflags Fix the warnings arch/m68k/mac/macboing.c: In function 'mac_mksound': arch/m68k/mac/macboing.c:189: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c:211: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c: In function 'mac_quadra_start_bell': arch/m68k/mac/macboing.c:241: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c:263: warning: comparison of distinct pointer types lacks a cast arch/m68k/mac/macboing.c: In function 'mac_quadra_ring_bell': arch/m68k/mac/macboing.c:283: warning: comparison of distinct pointer types lacks a cast Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:58 UTC |
63d66ca | Andrew Morton | 30 September 2010, 22:15:28 UTC | drivers/serial/mfd.c needs slab.h alpha allmodconfig: drivers/serial/mfd.c:144: error: implicit declaration of function 'kzalloc' drivers/serial/mfd.c:144: warning: assignment makes pointer from integer without a cast Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:58 UTC |
399f1e3 | Ira W. Snyder | 30 September 2010, 22:15:27 UTC | kfifo: fix scatterlist usage The kfifo_dma family of functions use sg_mark_end() on the last element in their scatterlist. This forces use of a fresh scatterlist for each DMA operation, which makes recycling a single scatterlist impossible. Change the behavior of the kfifo_dma functions to match the usage of the dma_map_sg function. This means that users must respect the returned nents value. The sample code is updated to reflect the change. This bug is trivial to cause: call kfifo_dma_in_prepare() such that it prepares a scatterlist with a single entry comprising the whole fifo. This is the case when you map the entirety of a newly created empty fifo. This causes the setup_sgl() function to mark the first scatterlist entry as the end of the chain, no matter what comes after it. Afterwards, add and remove some data from the fifo such that another call to kfifo_dma_in_prepare() will create two scatterlist entries. It returns nents=2. However, due to the previous sg_mark_end() call, sg_is_last() will now return true for the first scatterlist element. This causes the sample code to print a single scatterlist element when it should print two. By removing the call to sg_mark_end(), we make the API as similar as possible to the DMA mapping API. All users are required to respect the returned nents. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Stefani Seibold <stefani@seibold.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 October 2010, 17:50:58 UTC |
f569599 | Jeff Layton | 29 September 2010, 19:27:08 UTC | cifs: prevent infinite recursion in cifs_reconnect_tcon cifs_reconnect_tcon is called from smb_init. After a successful reconnect, cifs_reconnect_tcon will call reset_cifs_unix_caps. That function will, in turn call CIFSSMBQFSUnixInfo and CIFSSMBSetFSUnixInfo. Those functions also call smb_init. It's possible for the session and tcon reconnect to succeed, and then for another cifs_reconnect to occur before CIFSSMBQFSUnixInfo or CIFSSMBSetFSUnixInfo to be called. That'll cause those functions to call smb_init and cifs_reconnect_tcon again, ad infinitum... Break the infinite recursion by having those functions use a new smb_init variant that doesn't attempt to perform a reconnect. Reported-and-Tested-by: Michal Suchanek <hramrach@centrum.cz> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 01 October 2010, 17:50:08 UTC |
abb295f | Thomas Hellstrom | 01 October 2010, 08:21:51 UTC | vmwgfx: Fix fb VRAM pinning failure due to fragmentation If the soon-to-be scanout buffer is partly covering the intended VRAM region, move and pin will fail. In that case, just move it out to system before attempting to move it in again. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 October 2010, 11:08:55 UTC |
f1a28ee | Thomas Hellstrom | 01 October 2010, 08:21:50 UTC | vmwgfx: Remove initialisation of dev::devname The removed code causes oopses with newer drms on master drop. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 October 2010, 11:08:53 UTC |
7a1c2f6 | Thomas Hellstrom | 01 October 2010, 08:21:49 UTC | vmwgfx: Enable use of the vblank system This is to avoid accessing uninitialized data during drm_irq_uninstall and vblank ioctls. At the same time, enable error check from drm_kms_init which previously appeared to ignore all errors. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 October 2010, 11:08:51 UTC |
30c78bb | Thomas Hellstrom | 01 October 2010, 08:21:48 UTC | vmwgfx: vt-switch (master drop) fixes We add an option not to enable fbdev, this option is off (0) by default. Not enabling fbdev at load time makes it possible to co-operate with vga16fb and vga text mode when VT switching. However, if 3D resources are active when VT switching, we're currently not able to switch over to vga, due to device limitations. This fixes a bug where we previously lost 3D state during VT switch. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 October 2010, 11:08:50 UTC |
2854eed | Thomas Hellstrom | 30 September 2010, 10:18:33 UTC | drm/vmwgfx: Fix breakage introduced by commit "drm: block userspace under allocating buffer and having drivers overwrite it (v2)" The mentioned commit breaks the vmwgfx ioctl argument sanity check. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 October 2010, 11:08:48 UTC |
39b4d07 | Chris Wilson | 30 September 2010, 08:10:26 UTC | drm: Hold the mutex when dropping the last GEM reference (v2) In order to be fully threadsafe we need to check that the drm_gem_object refcount is still 0 after acquiring the mutex in order to call the free function. Otherwise, we may encounter scenarios like: Thread A: Thread B: drm_gem_close unreference_unlocked kref_put mutex_lock ... i915_gem_evict ... kref_get -> BUG ... i915_gem_unbind ... kref_put ... i915_gem_object_free ... mutex_unlock mutex_lock i915_gem_object_free -> BUG i915_gem_object_unbind kfree mutex_unlock Note that no driver is currently using the free_unlocked vfunc and it is scheduled for removal, hasten that process. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30454 Reported-and-Tested-by: Magnus Kessler <Magnus.Kessler@gmx.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 October 2010, 11:08:45 UTC |
6110a1f | Suresh Siddha | 01 October 2010, 01:19:07 UTC | intel_idle: Voluntary leave_mm before entering deeper Avoid TLB flush IPIs for the cores in deeper c-states by voluntary leave_mm() before entering into that state. CPUs tend to flush TLB in those c-states anyways. acpi_idle does this with C3-type states, but it was not caried over when intel_idle was introduced. intel_idle can apply it to C-states in addition to those that ACPI might export as C3... Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 01 October 2010, 01:19:22 UTC |
29d08b3 | Dave Airlie | 27 September 2010, 06:17:17 UTC | drm/gem: handlecount isn't really a kref so don't make it one. There were lots of places being inconsistent since handle count looked like a kref but it really wasn't. Fix this my just making handle count an atomic on the object, and have it increase the normal object kref. Now i915/radeon/nouveau drivers can drop the normal reference on userspace object creation, and have the handle hold it. This patch fixes a memory leak or corruption on unload, because the driver had no way of knowing if a handle had been actually added for this object, and the fbcon object needed to know this to clean itself up properly. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> | 30 September 2010, 23:17:44 UTC |
7031307 | MyungJoo Ham | 30 September 2010, 13:54:46 UTC | i2c-s3c2410: fix calculation of SDA line delay S3C2440 style I2C controller uses PCLK to calculate the SDA line delay. The driver wrongly assumed that this delay is calculated from the frequency that the controller is operating on. This patch fixes this issue. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> | 30 September 2010, 23:00:35 UTC |
0219896 | Thomas Gleixner | 28 September 2010, 21:20:23 UTC | x86, hpet: Fix bogus error check in hpet_assign_irq() create_irq() returns -1 if the interrupt allocation failed, but the code checks for irq == 0. Use create_irq_nr() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Venkatesh Pallipadi <venki@google.com> LKML-Reference: <alpine.LFD.2.00.1009282310360.2416@localhost6.localdomain6> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> | 30 September 2010, 22:57:35 UTC |
1cf180c | Thomas Gleixner | 28 September 2010, 18:57:19 UTC | x86, irq: Plug memory leak in sparse irq free_irq_cfg() is not freeing the cpumask_vars in irq_cfg. Fixing this triggers a use after free caused by the fact that copying struct irq_cfg is done with memcpy, which copies the pointer not the cpumask. Fix both places. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yhlu.kernel@gmail.com> LKML-Reference: <alpine.LFD.2.00.1009282052570.2416@localhost6.localdomain6> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> | 30 September 2010, 22:57:35 UTC |
87400e5 | Linus Torvalds | 30 September 2010, 15:37:38 UTC | Fix up more fallout form alpha signal cleanups Commit c52c2ddc1dfa ("alpha: switch osf_sigprocmask() to use of sigprocmask()") had several problems. The more obvious compile issues got fixed in commit 0f44fbd297e1 ("alpha: fix compile problem in arch/alpha/kernel/signal.c"), but it also caused a regression. Since _BLOCKABLE is already the set of signals that can be blocked, the code should do "newmask & _BLOCKABLE" rather than inverting _BLOCKABLE before masking. Reported-by: Michael Cree <mcree@orcon.net.nz> Patch-by: Al Viro <viro@zeniv.linux.org.uk> Patch-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 30 September 2010, 15:37:38 UTC |
0d49110 | Linus Torvalds | 30 September 2010, 03:38:07 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Don't walk off the end of fast symlinks. | 30 September 2010, 03:38:07 UTC |
130b985 | Arnd Bergmann | 29 September 2010, 15:47:58 UTC | drm: i810/i830: fix locked ioctl variant The i810 and i830 device drivers may replace their file operations on an open file descriptor. My previous patch to move the BKL out of the common DRM code into these drivers only caught the default file operations, not the ones that actually end up being used. Found while trying to come up with a way to kill the BKL for good in these drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@redhat.com> | 30 September 2010, 02:45:09 UTC |
77f8902 | Linus Torvalds | 30 September 2010, 01:41:19 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: fix interrupt clearing for mv_xor missing inline keyword for static function in linux/dmaengine.h dma/shdma: move dereference below the NULL check | 30 September 2010, 01:41:19 UTC |
1fc8a11 | Joel Becker | 30 September 2010, 00:33:05 UTC | ocfs2: Don't walk off the end of fast symlinks. ocfs2 fast symlinks are NUL terminated strings stored inline in the inode data area. However, disk corruption or a local attacker could, in theory, remove that NUL. Because we're using strlen() (my fault, introduced in a731d1 when removing vfs_follow_link()), we could walk off the end of that string. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org | 30 September 2010, 00:33:05 UTC |
4193d91 | Linus Torvalds | 29 September 2010, 21:58:11 UTC | Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs * 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: force background CIL push under sustained load | 29 September 2010, 21:58:11 UTC |
9d457c6 | Linus Torvalds | 29 September 2010, 21:57:53 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix max8925 irq control bit incorrect setting mfd: Ignore non-GPIO IRQs when setting wm831x IRQ types | 29 September 2010, 21:57:53 UTC |
f12f662 | Daniel J Blueman | 29 September 2010, 20:01:55 UTC | fix OMAP2 MTD build failure Fix build failure from recent interface change and merge. Tested on OMAP3430. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 September 2010, 20:17:56 UTC |
522440e | Jeff Layton | 29 September 2010, 13:49:54 UTC | cifs: set backing_dev_info on new S_ISREG inodes Testing on very recent kernel (2.6.36-rc6) made this warning pop: WARNING: at fs/fs-writeback.c:87 inode_to_bdi+0x65/0x70() Hardware name: Dirtiable inode bdi default != sb bdi cifs ...the following patch fixes it and seems to be the obviously correct thing to do for cifs. Cc: stable@kernel.org Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> | 29 September 2010, 19:23:23 UTC |
fdb8c58 | Len Brown | 29 September 2010, 19:18:28 UTC | Merge branches 'apei', 'battery-mwh-fix', 'bugzilla-10807', 'bugzilla-14736', 'bugzilla-14679', 'bugzilla-16396', 'launchpad-613381' and 'misc' into release | 29 September 2010, 19:18:28 UTC |
100cf87 | Len Brown | 29 September 2010, 02:57:02 UTC | ACPI: invoke DSDT corruption workaround on all Toshiba Satellite Our list of Toshiba Satellite models that require this workaround is growing -- so invoke the workaround for the entire product line. https://bugzilla.kernel.org/show_bug.cgi?id=14679 Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 18:18:59 UTC |
0bbba38 | Huang Ying | 29 September 2010, 11:53:55 UTC | ACPI, APEI, Fix ERST MOVE_DATA instruction implementation The src_base and dst_base fields in apei_exec_context are physical address, so they should be ioremaped before being used in ERST MOVE_DATA instruction. Reported-by: Javier Martinez Canillas <martinez.javier@gmail.com> Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 18:10:09 UTC |
0c827ee | Luis Henriques | 07 July 2010, 18:30:15 UTC | ACPI: fan: Fix more unbalanced code block commit 934231de706d2579fae14f5857fcd8de991009ff fixes an unbalanced CONFIG_ACPI_PROCFS code block during module initialisation. This patch fixes similar issue but for the module exit. Signed-off-by: Luis Henriques <luis.henrix@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 18:08:10 UTC |
c9ad8e0 | Len Brown | 28 September 2010, 20:50:50 UTC | ACPI: acpi_pad: simplify code to avoid false gcc build warning acpi_pad.c:432: warning: ‘num_cpus’ may be used uninitialized in this function gcc 4.4.4 was unable to notice that num_cpus is always set. Re-arrange the code to un-confuse gcc, and also make it easier for humans to read.... Signed-off-by: Len Brown <len.browns@intel.com> | 29 September 2010, 18:08:10 UTC |
23f124c | Huang Ying | 29 September 2010, 11:53:54 UTC | ACPI, APEI, Fix error path for memory allocation In ERST debug/test support patch, a dynamic allocated buffer is used. The may-failed memory allocation should be tried firstly before free the previous buffer. APEI resource management memory allocation related error path is fixed too. v2: - Fix error messages for APEI resources management Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 18:02:35 UTC |
1dd6b20 | Jin Dongming | 29 September 2010, 11:53:53 UTC | ACPI, APEI, HEST Fix the unsuitable usage of platform_data platform_data in hest_parse_ghes() is used for saving the address of entry information of erst_tab. When the device is failed to be added, platform_data will be freed by platform_device_put(). But the value saved in platform_data should not be freed here. If it is done, it will make system panic. So I think platform_data should save the address of allocated memory which saves entry information of erst_tab. This patch fixed it and I confirmed it on x86_64 next-tree. v2: Transport the pointer of hest_hdr to platform_data using platform_device_add_data() Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 18:02:26 UTC |
bad97c3 | Jin Dongming | 29 September 2010, 11:53:52 UTC | ACPI, APEI, Fix acpi_pre_map() return value After we ioremap() a new region, we call __acpi_try_ioremap() to see whether another thread has already mapped the same region. This check clobbers "vaddr", so compute the return value of acpi_pre_map() using the ioremap() result "map->vaddr" instead. v2: Modified the unsuitable description of patch. v3: Removed unlikely() check and made description simpler. Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 18:02:16 UTC |
3a78f96 | Huang Ying | 29 September 2010, 11:53:51 UTC | ACPI, APEI, Fix APEI related table size checking On Huang Ying's machine: erst_tab->header_length == sizeof(struct acpi_table_einj) but Yinghai reported that on his machine, erst_tab->header_length == sizeof(struct acpi_table_einj) - sizeof(struct acpi_table_header) To make erst table size checking code works on all systems, both testing are treated as PASS. Same situation applies to einj_tab->header_length, so corresponding table size checking is changed in similar way too. v2: - Treat both table size as valid Originally-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 17:59:18 UTC |
8016867 | Dave Chinner | 24 September 2010, 08:13:44 UTC | xfs: force background CIL push under sustained load I have been seeing occasional pauses in transaction throughput up to 30s long under heavy parallel workloads. The only notable thing was that the xfsaild was trying to be active during the pauses, but making no progress. It was running exactly 20 times a second (on the 50ms no-progress backoff), and the number of pushbuf events was constant across this time as well. IOWs, the xfsaild appeared to be stuck on buffers that it could not push out. Further investigation indicated that it was trying to push out inode buffers that were pinned and/or locked. The xfsbufd was also getting woken at the same frequency (by the xfsaild, no doubt) to push out delayed write buffers. The xfsbufd was not making any progress because all the buffers in the delwri queue were pinned. This scan- and-make-no-progress dance went one in the trace for some seconds, before the xfssyncd came along an issued a log force, and then things started going again. However, I noticed something strange about the log force - there were way too many IO's issued. 516 log buffers were written, to be exact. That added up to 129MB of log IO, which got me very interested because it's almost exactly 25% of the size of the log. He delayed logging code is suppose to aggregate the minimum of 25% of the log or 8MB worth of changes before flushing. That's what really puzzled me - why did a log force write 129MB instead of only 8MB? Essentially what has happened is that no CIL pushes had occurred since the previous tail push which cleared out 25% of the log space. That caused all the new transactions to block because there wasn't log space for them, but they kick the xfsaild to push the tail. However, the xfsaild was not making progress because there were buffers it could not lock and flush, and the xfsbufd could not flush them because they were pinned. As a result, both the xfsaild and the xfsbufd could not move the tail of the log forward without the CIL first committing. The cause of the problem was that the background CIL push, which should happen when 8MB of aggregated changes have been committed, is being held off by the concurrent transaction commit load. The background push does a down_write_trylock() which will fail if there is a concurrent transaction commit holding the push lock in read mode. With 8 CPUs all doing transactions as fast as they can, there was enough concurrent transaction commits to hold off the background push until tail-pushing could no longer free log space, and the halt would occur. It should be noted that there is no reason why it would halt at 25% of log space used by a single CIL checkpoint. This bug could definitely violate the "no transaction should be larger than half the log" requirement and hence result in corruption if the system crashed under heavy load. This sort of bug is exactly the reason why delayed logging was tagged as experimental.... The fix is to start blocking background pushes once the threshold has been exceeded. Rework the threshold calculations to keep the amount of log space a CIL checkpoint can use to below that of the AIL push threshold to avoid the problem completely. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> | 29 September 2010, 12:51:03 UTC |
9018231 | Kevin Liu | 08 September 2010, 13:44:36 UTC | mfd: Fix max8925 irq control bit incorrect setting In max8925_irq_sync_unlock(), irq control bit is set at the same time. Zero means enabling irq, and one means disabling irq. The original code is: irq_chg[0] &= irq_data->enable; It should be changed to: irq_chg[0] &= ~irq_data->enable; Otherwise, irq control bit is mess. Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 29 September 2010, 08:14:53 UTC |
c9d66d3 | Mark Brown | 16 August 2010, 19:26:51 UTC | mfd: Ignore non-GPIO IRQs when setting wm831x IRQ types The driver was originally tested with an additional patch which made this unneeded but that patch had issuges and got lost on the way to mainline, causing problems when the errors are reported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Cc: stable@kernel.org | 29 September 2010, 08:14:52 UTC |
9587a67 | Len Brown | 29 September 2010, 03:30:58 UTC | Merge branch 'meego-7093' into idle-release | 29 September 2010, 03:30:58 UTC |
e9a64ed | Len Brown | 25 September 2010, 00:50:02 UTC | acpi_idle: add missing \n to printk otherwise, these two lines print as one: ACPI: acpi_idle yielding to intel_idle ACPI: SSDT 3f5d8741 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 03:30:40 UTC |
3265eba | Namhyung Kim | 07 August 2010, 18:10:03 UTC | intel_idle: add missing __percpu markup intel_idle_cpuidle_devices is a percpu pointer but was missing __percpu markup. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 03:30:39 UTC |
68f1601 | Thomas Weber | 12 July 2010, 06:56:43 UTC | intel_idle: Change mode 755 => 644 Remove execution permission from source file. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 03:30:39 UTC |
20e3341 | Lucas De Marchi | 07 September 2010, 16:53:49 UTC | cpuidle: Fix typos Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 03:30:38 UTC |
337279c | Zhang Rui | 29 September 2010, 02:48:55 UTC | ACPI: Disable Windows Vista compatibility for Toshiba P305D Disable the Windows Vista (SP1) compatibility for Toshiba P305D. http://bugzilla.kernel.org/show_bug.cgi?id=14736 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 02:48:55 UTC |
25cb1bf | Andrea Gelmini | 18 August 2010, 13:22:10 UTC | ACPI: Kconfig: fix typo. "power of" -> "power off" Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 01:38:20 UTC |
bd126b2 | Namhyung Kim | 07 August 2010, 17:17:29 UTC | ACPI: add missing __percpu markup in arch/x86/kernel/acpi/cstate.c cpu_cstate_entry is a percpu pointer but was missing __percpu markup. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 01:38:20 UTC |
58f87ed | Lucas De Marchi | 07 September 2010, 16:49:45 UTC | ACPI: Fix typos Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 01:38:19 UTC |
e9f74c4 | Zhang Rui | 03 September 2010, 02:08:50 UTC | ACPI video: fix a poor warning message Fix a vague warning message. https://bugzilla.kernel.org/show_bug.cgi?id=16599 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 01:38:01 UTC |
ec652b3 | Zhang Rui | 30 August 2010, 06:08:02 UTC | ACPI: fix build warnings resulting from merge window conflict drivers/acpi/sysfs.c:154: warning: passing argument 1 of '__check_old_set_param' from incompatible pointer type include/linux/moduleparam.h:165: note: expected 'int (*)(const char *, struct kernel_param *)' but argument is of type 'int (*)(const char *, const struct kernel_param *)' Introduced by commit 1c8fce27e275fd7c6b75bc6455745f02d3903ee6 ("ACPI: introduce drivers/acpi/sysfs.c") interacting with commit 9bbb9e5a33109b2832e2e63dcc7a132924ab374b ("param: use ops in struct kernel_param, rather than get and set fns directly"). Use module_param_cb instead of the obsoleted module_param_call to fix a build warning. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 29 September 2010, 01:38:01 UTC |
899611e | Linus Torvalds | 29 September 2010, 01:01:22 UTC | Linux 2.6.36-rc6 | 29 September 2010, 01:01:22 UTC |
62bdb28 | David Howells | 29 September 2010, 00:57:02 UTC | MN10300: Handle missing sys_cacheflush() when caching disabled When caching is disabled on the MN10300 arch, the sys_cacheflush() function is removed by conditional stuff in the makefiles, but is still referred to by the syscall table. Provide a null version that just returns 0 when caching is disabled (or -EINVAL if the arguments are silly). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 September 2010, 01:01:14 UTC |
d900329 | H. Peter Anvin | 28 September 2010, 22:35:01 UTC | x86, cpu: After uncapping CPUID, re-run CPU feature detection After uncapping the CPUID level, we need to also re-run the CPU feature detection code. This resolves kernel bugzilla 16322. Reported-by: boris64 <bugzilla.kernel.org@boris64.net> Cc: <stable@kernel.org> v2.6.29..2.6.35 LKML-Reference: <tip-@git.kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> | 28 September 2010, 23:33:14 UTC |
7a1d602 | Len Brown | 28 September 2010, 21:51:51 UTC | ACPI: EC: add Vista incompatibility DMI entry for Toshiba Satellite L355 https://bugzilla.kernel.org/show_bug.cgi?id=12641 Signed-off-by: Len Brown <len.brown@intel.com> | 28 September 2010, 22:14:34 UTC |
bbb7030 | Len Brown | 28 September 2010, 21:48:49 UTC | ACPI: expand Vista blacklist to include SP1 and SP2 When we claim incompatibility with Vista, include both Vista SP1 and SP2. https://bugzilla.kernel.org/show_bug.cgi?id=12641 Signed-off-by: Len Brown <len.brown@intel.com> | 28 September 2010, 21:48:49 UTC |
64a3230 | Len Brown | 28 September 2010, 21:20:20 UTC | ACPI: delete ZEPTO idle=nomwait DMI quirk per comments in the bug report, this entry seems to hurt at much as it helps. https://bugzilla.kernel.org/show_bug.cgi?id=10807 Signed-off-by: Len Brown <len.brown@intel.com> | 28 September 2010, 21:20:20 UTC |
0f44fbd | Linus Torvalds | 28 September 2010, 20:26:57 UTC | alpha: fix compile problem in arch/alpha/kernel/signal.c Tssk. Apparently Al hadn't checked commit c52c2ddc1dfa ("alpha: switch osf_sigprocmask() to use of sigprocmask()") at all. It doesn't compile. Fixed as per suggestions from Michael Cree. Reported-by: Michael Cree <mcree@orcon.net.nz> Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 September 2010, 20:26:57 UTC |
573b638 | Colin Ian King | 02 August 2010, 15:14:43 UTC | ACPI: enable repeated PCIEXP wakeup by clearing PCIEXP_WAKE_STS on resume Section 4.7.3.1.1 (PM1 Status Registers) of version 4.0 of the ACPI spec concerning PCIEXP_WAKE_STS points out in in the final note field in table 4-11 that if this bit is set to 1 and the system is put into a sleeping state then the system will not automatically wake. This bit gets set by hardware to indicate that the system woke up due to a PCI Express wakeup event, so clear it during acpi_hw_clear_acpi_status() calls to enable subsequent resumes to work. BugLink: http://bugs.launchpad.net/bugs/613381 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Len Brown <len.brown@intel.com> | 28 September 2010, 19:40:46 UTC |
7268e3c | Linus Torvalds | 28 September 2010, 19:38:52 UTC | Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: fix module refcount breakage introduced by libahci split | 28 September 2010, 19:38:52 UTC |
fad16e7 | Tejun Heo | 21 September 2010, 07:25:48 UTC | ahci: fix module refcount breakage introduced by libahci split libata depends on scsi_host_template for module reference counting and sht's should be owned by each low level driver. During libahci split, the sht was left with libahci.ko leaving the actual low level drivers not reference counted. This made ahci and ahci_platform always unloadable even while they're being actively used. Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for each low level ahci driver. stable: only applicable to 2.6.35. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com> Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 28 September 2010, 19:14:51 UTC |
b4d3264 | Linus Torvalds | 28 September 2010, 19:13:13 UTC | Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon (coretemp): Fix build breakage if SMP is undefined | 28 September 2010, 19:13:13 UTC |
0d70397 | Linus Torvalds | 28 September 2010, 19:02:22 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix pci_resource_alignment prototype | 28 September 2010, 19:02:22 UTC |
a2724f2 | Linus Torvalds | 28 September 2010, 19:01:26 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) tcp: Fix >4GB writes on 64-bit. net/9p: Mount only matching virtio channels de2104x: fix ethtool tproxy: check for transparent flag in ip_route_newports ipv6: add IPv6 to neighbour table overflow warning tcp: fix TSO FACK loss marking in tcp_mark_head_lost 3c59x: fix regression from patch "Add ethtool WOL support" ipv6: add a missing unregister_pernet_subsys call s390: use free_netdev(netdev) instead of kfree() sgiseeq: use free_netdev(netdev) instead of kfree() rionet: use free_netdev(netdev) instead of kfree() ibm_newemac: use free_netdev(netdev) instead of kfree() smsc911x: Add MODULE_ALIAS() net: reset skb queue mapping when rx'ing over tunnel br2684: fix scheduling while atomic de2104x: fix TP link detection de2104x: fix power management de2104x: disable autonegotiation on broken hardware net: fix a lockdep splat e1000e: 82579 do not gate auto config of PHY by hardware during nominal use ... | 28 September 2010, 19:01:26 UTC |
fff2017 | Guenter Roeck | 28 September 2010, 01:01:49 UTC | hwmon (coretemp): Fix build breakage if SMP is undefined Commit e40cc4bdfd4b89813f072f72bd9c7055814d3f0f introduced a build breakage if CONFIG_SMP is undefined. This commit fixes the problem. This fix is only a workaround. For a real fix, cpu_sibling_mask() should be defined in UP include code, eg in linux/smp.h, and asm/smp.h should not be included directly. This fix is currently not possible because asm/smp.h defines cpu_sibling_mask() unconditionally and is included directly from many source files. Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> | 28 September 2010, 11:18:51 UTC |
050026f | Linus Torvalds | 28 September 2010, 04:19:27 UTC | Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Avoid 'constant_test_bit()' misoptimization due to cast to non-volatile | 28 September 2010, 04:19:27 UTC |
01db403 | David S. Miller | 28 September 2010, 03:24:54 UTC | tcp: Fix >4GB writes on 64-bit. Fixes kernel bugzilla #16603 tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write zero bytes, for example. There is also the problem higher up of how verify_iovec() works. It wants to prevent the total length from looking like an error return value. However it does this using 'int', but syscalls return 'long' (and thus signed 64-bit on 64-bit machines). So it could trigger false-positives on 64-bit as written. So fix it to use 'long'. Reported-by: Olaf Bonorden <bono@onlinehome.de> Reported-by: Daniel Büse <dbuese@gmx.de> Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 September 2010, 03:24:54 UTC |
252a52a | Dan Rosenberg | 27 September 2010, 16:30:28 UTC | Fix pktcdvd ioctl dev_minor range check The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a pktcdvd_device from the global pkt_devs array. The index into this array is provided directly by the user and is a signed integer, so the comparison to ensure that it falls within the bounds of this array will fail when provided with a negative index. This can be used to read arbitrary kernel memory or cause a crash due to an invalid pointer dereference. This can be exploited by users with permission to open /dev/pktcdvd/control (on many distributions, this is readable by group "cdrom"). Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> [ Rather than add a cast, just make the function take the right type -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 September 2010, 23:29:06 UTC |
95929ef | David Howells | 27 September 2010, 12:12:33 UTC | MN10300: Default config choice GDBSTUB_TTYSM0 should be GDBSTUB_ON_TTYSM0 The configuration choice for the port on which the GDB stub listens has a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to match the option. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 September 2010, 23:29:06 UTC |
f36fce0 | Alex Deucher | 27 September 2010, 15:33:00 UTC | drm/radeon/kms: add quirk for MSI K9A2GM motherboard Board has no digital connectors Reported-by: Andy Walls <awalls@md.metrocast.net> Tested-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 27 September 2010, 23:16:13 UTC |
e488459 | Alex Deucher | 27 September 2010, 14:57:10 UTC | drm/radeon/kms: fix potential segfault in r600_ioctl_wait_idle radeon_gem_wait_idle_ioctl can apparently get called prior to the vram page being set up or even if accel if false, so make sure it's valid before using it. Should fix: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=597636 https://bugs.freedesktop.org/show_bug.cgi?id=29834 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 27 September 2010, 23:16:05 UTC |
31dfbc9 | Chris Wilson | 27 September 2010, 20:28:30 UTC | drm: Prune GEM vma entries Hook the GEM vm open/close ops into the generic drm vm open/close so that the private vma entries are created and destroy appropriately. Fixes the leak of the drm_vma_entries during the lifetime of the filp. Reported-by: Matt Mackall <mpm@selenic.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 27 September 2010, 23:14:34 UTC |
4bba0fd | Jon Povey | 17 September 2010, 03:02:11 UTC | i2c-davinci: Fix race when setting up for TX When setting up to transmit, a race exists between the ISR and i2c_davinci_xfer_msg() trying to load the first byte and adjust counters. This is mostly visible for transmits > 1 byte long. The hardware starts sending immediately that MDR is loaded. IMR trickery doesn't work because if we start sending, finish the first byte and an XRDY event occurs before we load IMR to unmask it, we never get an interrupt, and we timeout. Move the MDR load after DXR,IMR loads to avoid this race without locking. Tested on DM355 connected to Techwell TW2836 and Wolfson WM8985 Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> | 27 September 2010, 23:05:08 UTC |
0b20406 | Sven Eckelmann | 27 September 2010, 22:54:44 UTC | net/9p: Mount only matching virtio channels p9_virtio_create will only compare the the channel's tag characters against the device name till the end of the channel's tag but not till the end of the device name. This means that if a user defines channels with the tags foo and foobar then he would mount foo when he requested foonot and may mount foo when he requested foobar. Thus it is necessary to check both string lengths against each other in case of a successful partial string match. Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 September 2010, 22:54:44 UTC |
387a856 | Ondrej Zary | 27 September 2010, 11:41:45 UTC | de2104x: fix ethtool When the interface is up, using ethtool breaks it because: a) link is put down but media_timer interval is not shortened to NO_LINK b) rxtx is stopped but not restarted Also manual 10baseT-HD (and probably FD too - untested) mode does not work - the link is forced up, packets are transmitted but nothing is received. Changing CSR14 value to match documentation (not disabling link check) fixes this. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 September 2010, 22:40:29 UTC |
cc33e54 | Bernhard Walle | 27 September 2010, 10:55:16 UTC | i2c-octeon: Return -ETIMEDOUT in octeon_i2c_wait() on timeout It doesn't make sense to set result to -ETIMEDOUT but return 0 (success) afterwards. Since there's code in octeon_i2c_start() to handle the error, it should be called. Signed-off-by: Bernhard Walle <walle@corscience.de> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> | 27 September 2010, 22:21:16 UTC |