06e5801 | Linus Torvalds | 16 March 2015, 00:38:20 UTC | Linux 4.0-rc4 | 16 March 2015, 00:38:20 UTC |
0835208 | Linus Torvalds | 15 March 2015, 22:20:09 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fix from Dave Airlie: "An oops snuck in in an -rc3 patch, this fixes it" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: [PATCH] drm/mm: Fix support 4 GiB and larger ranges | 15 March 2015, 22:20:09 UTC |
1ee89c5 | Linus Torvalds | 15 March 2015, 22:07:08 UTC | Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clock framework fixes from Michael Turquette: "The clk fixes for 4.0-rc4 comprise three themes. First are the usual driver fixes for new regressions since v3.19. Second are fixes to the common clock divider type caused by recent changes to how we round clock rates. This affects many clock drivers that use this common code. Finally there are fixes for drivers that improperly compared struct clk pointers (drivers must not deref these pointers). While some of these drivers have done this for a long time, this did not cause a problem until we started generating unique struct clk pointers for every consumer. A new function, clk_is_match was introduced to get these drivers working again and they are fixed up to no longer deref the pointers themselves" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: ASoC: kirkwood: fix struct clk pointer comparing ASoC: fsl_spdif: fix struct clk pointer comparing ARM: imx: fix struct clk pointer comparing clk: introduce clk_is_match clk: don't export static symbol clk: divider: fix calculation of initial best divider when rounding to closest clk: divider: fix selection of divider when rounding to closest clk: divider: fix calculation of maximal parent rate for a given divider clk: divider: return real rate instead of divider value clk: qcom: fix platform_no_drv_owner.cocci warnings clk: qcom: fix platform_no_drv_owner.cocci warnings clk: qcom: Add PLL4 vote clock clk: qcom: lcc-msm8960: Fix PLL rate detection clk: qcom: Fix slimbus n and m val offsets clk: ti: Fix FAPLL parent enable bit handling | 15 March 2015, 22:07:08 UTC |
046d669 | Krzysztof Kolasa | 15 March 2015, 19:22:36 UTC | [PATCH] drm/mm: Fix support 4 GiB and larger ranges bad argument if(tmp)... in check_free_hole fix oops: kernel BUG at drivers/gpu/drm/drm_mm.c:305! [airlied: excellent, this was my task for today]. Signed-off-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 March 2015, 20:28:50 UTC |
6981e2a | Linus Torvalds | 15 March 2015, 17:49:38 UTC | Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This is a rather unpleasantly large set of bug fixes for arm-soc, Most of them because of cross-tree dependencies for Exynos where we should have figured out the right path to merge things before the merge window, and then the maintainer being unable to sort things out in time during a business trip. The other changes contained here are the usual collection: MAINTAINERS file updates - Gregory Clement is now a co-maintainer for the legacy Marvell EBU platforms - A MAINTAINERS entry for the Freescale Vybrid platform that was added last year - Matt Porter no longer works as a maintainer on Broadcom SoCs Build-time issues - A compile-time error for at91 - Several minor DT fixes on at91, imx, exynos, socfpga, and omap - The new digicolor platform was not correctly enabled at all Configuration issues - Two defconfig fix for regressions using USB on versatile express and on OMAP3 - Enabling all 8 CPUs on Allwinner/SUNxi - Enabling the new STiH410 platform to be usable Bug fixes in platform code - A missing barrier for socfpga - Fixing LPDDR1 self-refresh mode on at91 - Fixing RTC interrupt numbers on Exynos3250 - Fixing a cache-coherency issues in CPU power-down on Exynos5 - Multiple small OMAP power management fixes" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (69 commits) MAINTAINERS: Add myself as co-maintainer to the legacy support of the mvebu SoCs ARM: at91: pm_slowclock: fix the compilation error ARM: at91/dt: fix USB high-speed clock to select UTMI ARM: at91/dt: fix at91 udc compatible strings ARM: at91/dt: declare matrix node as a syscon device ARM: vexpress: update CONFIG_USB_ISP1760 option ARM: digicolor: add the machine directory to Makefile ARM: STi: Add STiH410 SoC support MAINTAINERS: add Freescale Vybrid SoC MAINTAINERS: Remove self as ARM mach-bcm co-maintainer ARM: imx6sl-evk: set swbst_reg as vbus's parent reg ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding ARM: dts: OMAP5: fix polling intervals for thermal zones ... | 15 March 2015, 17:49:38 UTC |
71c87bd | Linus Torvalds | 15 March 2015, 17:41:30 UTC | Merge tag 'irqchip-fixes-4.0' of git://git.infradead.org/users/jcooper/linux Pull irqchip fixes from Jason Cooper: "armada-370-xp: - Chained per-cpu interrupts gic{,-v3,v3-its}" - Various fixes for safer operation" * tag 'irqchip-fixes-4.0' of git://git.infradead.org/users/jcooper/linux: irqchip: gicv3-its: Support safe initialization irqchip: gicv3-its: Define macros for GITS_CTLR fields irqchip: gicv3-its: Add limitation to page order irqchip: gicv3-its: Use 64KB page as default granule irqchip: gicv3-its: Zero itt before handling to hardware irqchip: gic-v3: Fix out of bounds access to cpu_logical_map irqchip: gic: Fix unsafe locking reported by lockdep irqchip: gicv3-its: Fix unsafe locking reported by lockdep irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration irqchip: gicv3-its: Allocate enough memory for the full range of DeviceID irqchip: gicv3-its: Fix ITS CPU init irqchip: armada-370-xp: Fix chained per-cpu interrupts | 15 March 2015, 17:41:30 UTC |
aaa95f7 | Jason Cooper | 15 March 2015, 01:41:26 UTC | Merge branch 'irqchip/urgent-gic' into irqchip/urgent | 15 March 2015, 01:41:26 UTC |
7cd9beb | Linus Torvalds | 14 March 2015, 21:54:25 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Misc i915, vmwgfx and radeon fixes along with a fix for one of those recursive sleep mutex debug cases in the mst code" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix an issue with the device losing its irq line on module unload drm/vmwgfx: Correctly NULLify dma buffer pointer on failure drm/vmwgfx: Reorder device takedown somewhat drm/vmwgfx: Fix a couple of lock dependency violations drm/radeon: drop setting UPLL to sleep mode drm/radeon: fix wait to actually occur after the signaling callback drm/i915: Prevent TLB error on first execution on SNB drm/i915: Do both mt and gen6 style forcewake reset on ivb probe drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again drm/i915: use in_interrupt() not in_irq() to check context drm/mst: fix recursive sleep warning on qlock drm: Don't assign fbs for universal cursor support to files | 14 March 2015, 21:54:25 UTC |
60b3e7b | Linus Torvalds | 14 March 2015, 21:23:50 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "This is a simple fix for a domain revalidation crash which has recently turned up in the libsas code (applies to mvsas, isc and aic94xx)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: libsas: Fix Kernel Crash in smp_execute_task | 14 March 2015, 21:23:50 UTC |
0f0910a | Linus Torvalds | 14 March 2015, 17:02:21 UTC | Merge tag 'locks-v4.0-4' of git://git.samba.org/jlayton/linux Pull file locking bugfix from Jeff Layton: "Just a small fix for a potential problem in one of the lease tracepoints" * tag 'locks-v4.0-4' of git://git.samba.org/jlayton/linux: locks: fix generic_delete_lease tracepoint to use victim pointer | 14 March 2015, 17:02:21 UTC |
0be952c | Linus Torvalds | 14 March 2015, 16:36:10 UTC | Merge tag 'vfio-v4.0-rc4' of git://github.com/awilliam/linux-vfio Pull VFIO fix from Alex Williamson: "Add missing break to avoid clobbering ioctl (Alexey Kardashevskiy)" * tag 'vfio-v4.0-rc4' of git://github.com/awilliam/linux-vfio: vfio-pci: Add missing break to enable VFIO_PCI_ERR_IRQ_INDEX | 14 March 2015, 16:36:10 UTC |
9c987a3 | Linus Torvalds | 14 March 2015, 16:32:00 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - add TLB invalidation for page table tear-down which was missed when support for CONFIG_HAVE_RCU_TABLE_FREE was added (assuming page table freeing was always deferred) - use UEFI for system and reset poweroff if available - fix asm label placement in relation to the alignment statement * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: put __boot_cpu_mode label after alignment instead of before efi/arm64: use UEFI for system reset and poweroff arm64: Invalidate the TLB corresponding to intermediate page table levels | 14 March 2015, 16:32:00 UTC |
e6c2d9c | Linus Torvalds | 14 March 2015, 16:26:23 UTC | Merge tag 'linux-kselftest-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "selftests/exec: Check if the syscall exists and bail if not" * tag 'linux-kselftest-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/exec: Check if the syscall exists and bail if not | 14 March 2015, 16:26:23 UTC |
a9b1b45 | Jeff Layton | 14 March 2015, 13:45:35 UTC | locks: fix generic_delete_lease tracepoint to use victim pointer It's possible that "fl" won't point at a valid lock at this point, so use "victim" instead which is either a valid lock or NULL. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> | 14 March 2015, 13:45:35 UTC |
947bb75 | Ard Biesheuvel | 13 March 2015, 15:21:18 UTC | arm64: put __boot_cpu_mode label after alignment instead of before Another one for the big head.S spring cleaning: the label should be after the .align or it may point to the padding. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 14 March 2015, 11:02:26 UTC |
60c0d45 | Ard Biesheuvel | 06 March 2015, 14:49:24 UTC | efi/arm64: use UEFI for system reset and poweroff If UEFI Runtime Services are available, they are preferred over direct PSCI calls or other methods to reset the system. For the reset case, we need to hook into machine_restart(), as the arm_pm_restart function pointer may be overwritten by modules. Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 14 March 2015, 11:00:18 UTC |
285994a | Catalin Marinas | 11 March 2015, 12:20:39 UTC | arm64: Invalidate the TLB corresponding to intermediate page table levels The ARM architecture allows the caching of intermediate page table levels and page table freeing requires a sequence like: pmd_clear() TLB invalidation pte page freeing With commit 5e5f6dc10546 (arm64: mm: enable HAVE_RCU_TABLE_FREE logic), the page table freeing batching was moved from tlb_remove_page() to tlb_remove_table(). The former takes care of TLB invalidation as this is also shared with pte clearing and page cache page freeing. The latter, however, does not invalidate the TLBs for intermediate page table levels as it probably relies on the architecture code to do it if required. When the mm->mm_users < 2, tlb_remove_table() does not do any batching and page table pages are freed before tlb_finish_mmu() which performs the actual TLB invalidation. This patch introduces __tlb_flush_pgtable() for arm64 and calls it from the {pte,pmd,pud}_free_tlb() directly without relying on deferred page table freeing. Fixes: 5e5f6dc10546 arm64: mm: enable HAVE_RCU_TABLE_FREE logic Reported-by: Jon Masters <jcm@redhat.com> Tested-by: Jon Masters <jcm@redhat.com> Tested-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 14 March 2015, 10:48:30 UTC |
5fb0f7f | Linus Torvalds | 13 March 2015, 21:30:38 UTC | Merge tag 'pm+acpi-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "Just two fixes, one for an ACPI LPSS driver issue introduced during the 3.17 cycle and one revert of a recent commit that sort of broke the cpupower tool. Specifics: - Fix an ACPI LPSS (Low-Power Subsystem) driver issue causing the 8250_dw driver to confuse an LPSS clock with another one it is supposed to handle due to the lack of identification allowing it to tell those clocks apart (Heikki Krogerus). - Revert a recent commit that was supposed to improve the usability of the cpupower tool, but clearly did the opposite (Josh Boyer)" * tag 'pm+acpi-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "cpupower Makefile change to help run the tool without 'make install'" ACPI / LPSS: provide con_id for the clkdev | 13 March 2015, 21:30:38 UTC |
bfda403 | Gregory CLEMENT | 13 March 2015, 13:41:45 UTC | MAINTAINERS: Add myself as co-maintainer to the legacy support of the mvebu SoCs I will also take care of the legacy support(not fully converted to DT) of the mvebu SoCs. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 13 March 2015, 21:11:19 UTC |
b176023 | Rafael J. Wysocki | 13 March 2015, 20:43:08 UTC | Merge branch 'pm-tools' * pm-tools: Revert "cpupower Makefile change to help run the tool without 'make install'" | 13 March 2015, 20:43:08 UTC |
f47e331 | Linus Torvalds | 13 March 2015, 20:34:38 UTC | Merge tag 'stable/for-linus-4.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - fix a PV regression in 3.19. - fix a dom0 crash on hosts with large numbers of PIRQs. - prevent pcifront from disabling memory or I/O port access, which may trigger host crashes. * tag 'stable/for-linus-4.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-pciback: limit guest control of command register xen/events: avoid NULL pointer dereference in dom0 on large machines xen: Remove trailing semicolon from xenbus_register_frontend() definition x86/xen: correct bug in p2m list initialization | 13 March 2015, 20:34:38 UTC |
bbc54a0 | Linus Torvalds | 13 March 2015, 20:30:00 UTC | Merge tag 'sound-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This is a round of HD-audio fixes: there are a long-standing regression fix and a few more device/codec-specific quirks. In addition, a couple of FireWire regression fixes, a USB-audio quirk for Roland UA-22 and a sanity check in API for user-defined control elements" * tag 'sound-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Don't access stereo amps for mono channel widgets ALSA: hda - Add workaround for MacBook Air 5,2 built-in mic ALSA: hda - Set single_adc_amp flag for CS420x codecs ALSA: snd-usb: add quirks for Roland UA-22 ALSA: control: Add sanity checks for user ctl id name string ALSA: hda - Fix built-in mic on Compaq Presario CQ60 ALSA: firewire-lib: leave unit reference counting completely Revert "ALSA: dice: fix wrong offsets for Dice interface" ALSA: hda - Fix regression of HD-audio controller fallback modes | 13 March 2015, 20:30:00 UTC |
3d52c5b | Linus Torvalds | 13 March 2015, 18:10:10 UTC | Merge tag 'devicetree-fixes-for-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - fix for stdout-path option parsing with added unittest - fix for stdout-path interaction with earlycon - several DT unittest fixes - fix Sparc allmodconfig build error on of_platform_register_reconfig_notifier - several DT overlay kconfig and build warning fixes - several DT binding documentation updates * tag 'devicetree-fixes-for-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of/platform: Fix sparc:allmodconfig build of: unittest: Add options string testcase variants of: fix handling of '/' in options for of_find_node_by_path() of/unittest: Fix the wrong expected value in of_selftest_property_string of/unittest: remove the duplicate of_changeset_init dt: submitting-patches: clarify that DT maintainers are to be cced on bindings of: unittest: fix I2C dependency of/overlay: Remove unused variable Documentation: DT: Renamed of-serial.txt to 8250.txt of: Fix premature bootconsole disable with 'stdout-path' serial: add device tree binding documentation for ETRAX FS UART of/overlay: Directly include idr.h of: Drop superfluous dependance for OF_OVERLAY of: Add vendor prefix for Arasan of: Add prompt for OF_OVERLAY config | 13 March 2015, 18:10:10 UTC |
f788baa | Linus Torvalds | 13 March 2015, 17:55:32 UTC | Merge branch 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull gadgetfs fixes from Al Viro: "Assorted fixes around AIO on gadgetfs: leaks, use-after-free, troubles caused by ->f_op flipping" * 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: gadgetfs: really get rid of switching ->f_op gadgetfs: get rid of flipping ->f_op in ep_config() gadget: switch ep_io_operations to ->read_iter/->write_iter gadgetfs: use-after-free in ->aio_read() gadget/function/f_fs.c: switch to ->{read,write}_iter() gadget/function/f_fs.c: use put iov_iter into io_data gadget/function/f_fs.c: close leaks move iov_iter.c from mm/ to lib/ new helper: dup_iter() | 13 March 2015, 17:55:32 UTC |
a697c2e | Guenter Roeck | 11 March 2015, 03:31:04 UTC | of/platform: Fix sparc:allmodconfig build sparc:allmodconfig fails to build with: drivers/built-in.o: In function `platform_bus_init': (.init.text+0x3684): undefined reference to `of_platform_register_reconfig_notifier' of_platform_register_reconfig_notifier is only declared if both OF_ADDRESS and OF_DYNAMIC are configured. Yet, the include file only declares a dummy function if OF_DYNAMIC is not configured. The sparc architecture does not configure OF_ADDRESS, but does configure OF_DYNAMIC, causing above error. Fixes: 801d728c10db ("of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type") Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rob Herring <robh@kernel.org> | 13 March 2015, 14:45:24 UTC |
ef403ed | Takashi Iwai | 12 March 2015, 07:30:11 UTC | ALSA: hda - Don't access stereo amps for mono channel widgets The current HDA generic parser initializes / modifies the amp values always in stereo, but this seems causing the problem on ALC3229 codec that has a few mono channel widgets: namely, these mono widgets react to actions for both channels equally. In the driver code, we do care the mono channel and create a control only for the left channel (as defined in HD-audio spec) for such a node. When the control is updated, only the left channel value is changed. However, in the resume, the right channel value is also restored from the initial value we took as stereo, and this overwrites the left channel value. This ends up being the silent output as the right channel has been never touched and remains muted. This patch covers the places where unconditional stereo amp accesses are done and converts to the conditional accesses. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94581 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 13 March 2015, 06:37:21 UTC |
c202baf | Linus Torvalds | 13 March 2015, 01:46:19 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: memcg: disable hierarchy support if bound to the legacy cgroup hierarchy mm: reorder can_do_mlock to fix audit denial kasan, module: move MODULE_ALIGN macro into <linux/moduleloader.h> kasan, module, vmalloc: rework shadow allocation for modules fanotify: fix event filtering with FAN_ONDIR set mm/nommu.c: export symbol max_mapnr arch/c6x/include/asm/pgtable.h: define dummy pgprot_writecombine for !MMU nilfs2: fix deadlock of segment constructor during recovery mm: cma: fix CMA aligned offset calculation mm, hugetlb: close race when setting PageTail for gigantic pages mm, oom: do not fail __GFP_NOFAIL allocation if oom killer is disabled drivers/rtc/rtc-s3c.c: add .needs_src_clk to s3c6410 RTC data ocfs2: make append_dio an incompat feature | 13 March 2015, 01:46:19 UTC |
7feee59 | Vladimir Davydov | 12 March 2015, 23:26:19 UTC | memcg: disable hierarchy support if bound to the legacy cgroup hierarchy If the memory cgroup controller is initially mounted in the scope of the default cgroup hierarchy and then remounted to a legacy hierarchy, it will still have hierarchy support enabled, which is incorrect. We should disable hierarchy support if bound to the legacy cgroup hierarchy. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:08 UTC |
a5a6579 | Jeff Vander Stoep | 12 March 2015, 23:26:17 UTC | mm: reorder can_do_mlock to fix audit denial A userspace call to mmap(MAP_LOCKED) may result in the successful locking of memory while also producing a confusing audit log denial. can_do_mlock checks capable and rlimit. If either of these return positive can_do_mlock returns true. The capable check leads to an LSM hook used by apparmour and selinux which produce the audit denial. Reordering so rlimit is checked first eliminates the denial on success, only recording a denial when the lock is unsuccessful as a result of the denial. Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Acked-by: Nick Kralevich <nnk@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Paul Cassella <cassella@cray.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:08 UTC |
d3733e5 | Andrey Ryabinin | 12 March 2015, 23:26:14 UTC | kasan, module: move MODULE_ALIGN macro into <linux/moduleloader.h> include/linux/moduleloader.h is more suitable place for this macro. Also change alignment to PAGE_SIZE for CONFIG_KASAN=n as such alignment already assumed in several places. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:08 UTC |
a5af5aa | Andrey Ryabinin | 12 March 2015, 23:26:11 UTC | kasan, module, vmalloc: rework shadow allocation for modules Current approach in handling shadow memory for modules is broken. Shadow memory could be freed only after memory shadow corresponds it is no longer used. vfree() called from interrupt context could use memory its freeing to store 'struct llist_node' in it: void vfree(const void *addr) { ... if (unlikely(in_interrupt())) { struct vfree_deferred *p = this_cpu_ptr(&vfree_deferred); if (llist_add((struct llist_node *)addr, &p->list)) schedule_work(&p->wq); Later this list node used in free_work() which actually frees memory. Currently module_memfree() called in interrupt context will free shadow before freeing module's memory which could provoke kernel crash. So shadow memory should be freed after module's memory. However, such deallocation order could race with kasan_module_alloc() in module_alloc(). Free shadow right before releasing vm area. At this point vfree()'d memory is not used anymore and yet not available for other allocations. New VM_KASAN flag used to indicate that vm area has dynamically allocated shadow memory so kasan frees shadow only if it was previously allocated. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:08 UTC |
b3c1030 | Suzuki K. Poulose | 12 March 2015, 23:26:08 UTC | fanotify: fix event filtering with FAN_ONDIR set With FAN_ONDIR set, the user can end up getting events, which it hasn't marked. This was revealed with fanotify04 testcase failure on Linux-4.0-rc1, and is a regression from 3.19, revealed with 66ba93c0d7fe6 ("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask"). # /opt/ltp/testcases/bin/fanotify04 [ ... ] fanotify04 7 TPASS : event generated properly for type 100000 fanotify04 8 TFAIL : fanotify04.c:147: got unexpected event 30 fanotify04 9 TPASS : No event as expected The testcase sets the adds the following marks : FAN_OPEN | FAN_ONDIR for a fanotify on a dir. Then does an open(), followed by close() of the directory and expects to see an event FAN_OPEN(0x20). However, the fanotify returns (FAN_OPEN|FAN_CLOSE_NOWRITE(0x10)). This happens due to the flaw in the check for event_mask in fanotify_should_send_event() which does: if (event_mask & marks_mask & ~marks_ignored_mask) return true; where, event_mask == (FAN_ONDIR | FAN_CLOSE_NOWRITE), marks_mask == (FAN_ONDIR | FAN_OPEN), marks_ignored_mask == 0 Fix this by masking the outgoing events to the user, as we already take care of FAN_ONDIR and FAN_EVENT_ON_CHILD. Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:08 UTC |
5b8bf30 | gchen gchen | 12 March 2015, 23:26:05 UTC | mm/nommu.c: export symbol max_mapnr Several modules may need max_mapnr, so export, the related error with allmodconfig under c6x: MODPOST 3327 modules ERROR: "max_mapnr" [fs/pstore/ramoops.ko] undefined! ERROR: "max_mapnr" [drivers/media/v4l2-core/videobuf2-dma-contig.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:08 UTC |
65b9ab8 | Chen Gang | 12 March 2015, 23:26:03 UTC | arch/c6x/include/asm/pgtable.h: define dummy pgprot_writecombine for !MMU When !MMU, asm-generic will not define default pgprot_writecombine, so c6x needs to define it by itself. The related error: CC [M] fs/pstore/ram_core.o fs/pstore/ram_core.c: In function 'persistent_ram_vmap': fs/pstore/ram_core.c:399:10: error: implicit declaration of function 'pgprot_writecombine' [-Werror=implicit-function-declaration] prot = pgprot_writecombine(PAGE_KERNEL); ^ fs/pstore/ram_core.c:399:8: error: incompatible types when assigning to type 'pgprot_t {aka struct <anonymous>}' from type 'int' prot = pgprot_writecombine(PAGE_KERNEL); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:08 UTC |
283ee14 | Ryusuke Konishi | 12 March 2015, 23:26:00 UTC | nilfs2: fix deadlock of segment constructor during recovery According to a report from Yuxuan Shui, nilfs2 in kernel 3.19 got stuck during recovery at mount time. The code path that caused the deadlock was as follows: nilfs_fill_super() load_nilfs() nilfs_salvage_orphan_logs() * Do roll-forwarding, attach segment constructor for recovery, and kick it. nilfs_segctor_thread() nilfs_segctor_thread_construct() * A lock is held with nilfs_transaction_lock() nilfs_segctor_do_construct() nilfs_segctor_drop_written_files() iput() iput_final() write_inode_now() writeback_single_inode() __writeback_single_inode() do_writepages() nilfs_writepage() nilfs_construct_dsync_segment() nilfs_transaction_lock() --> deadlock This can happen if commit 7ef3ff2fea8b ("nilfs2: fix deadlock of segment constructor over I_SYNC flag") is applied and roll-forward recovery was performed at mount time. The roll-forward recovery can happen if datasync write is done and the file system crashes immediately after that. For instance, we can reproduce the issue with the following steps: < nilfs2 is mounted on /nilfs (device: /dev/sdb1) > # dd if=/dev/zero of=/nilfs/test bs=4k count=1 && sync # dd if=/dev/zero of=/nilfs/test conv=notrunc oflag=dsync bs=4k count=1 && reboot -nfh < the system will immediately reboot > # mount -t nilfs2 /dev/sdb1 /nilfs The deadlock occurs because iput() can run segment constructor through writeback_single_inode() if MS_ACTIVE flag is not set on sb->s_flags. The above commit changed segment constructor so that it calls iput() asynchronously for inodes with i_nlink == 0, but that change was imperfect. This fixes the another deadlock by deferring iput() in segment constructor even for the case that mount is not finished, that is, for the case that MS_ACTIVE flag is not set. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: Yuxuan Shui <yshuiv7@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:08 UTC |
850fc43 | Danesh Petigara | 12 March 2015, 23:25:57 UTC | mm: cma: fix CMA aligned offset calculation The CMA aligned offset calculation is incorrect for non-zero order_per_bit values. For example, if cma->order_per_bit=1, cma->base_pfn= 0x2f800000 and align_order=12, the function returns a value of 0x17c00 instead of 0x400. This patch fixes the CMA aligned offset calculation. The previous calculation was wrong and would return too-large values for the offset, so that when cma_alloc looks for free pages in the bitmap with the requested alignment > order_per_bit, it starts too far into the bitmap and so CMA allocations will fail despite there actually being plenty of free pages remaining. It will also probably have the wrong alignment. With this change, we will get the correct offset into the bitmap. One affected user is powerpc KVM, which has kvm_cma->order_per_bit set to KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, or 18 - 12 = 6. [gregory.0xf0@gmail.com: changelog additions] Signed-off-by: Danesh Petigara <dpetigara@broadcom.com> Reviewed-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:07 UTC |
44fc805 | David Rientjes | 12 March 2015, 23:25:54 UTC | mm, hugetlb: close race when setting PageTail for gigantic pages Now that gigantic pages are dynamically allocatable, care must be taken to ensure that p->first_page is valid before setting PageTail. If this isn't done, then it is possible to race and have compound_head() return NULL. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:07 UTC |
e009d5d | Michal Hocko | 12 March 2015, 23:25:52 UTC | mm, oom: do not fail __GFP_NOFAIL allocation if oom killer is disabled Tetsuo Handa has pointed out that __GFP_NOFAIL allocations might fail after OOM killer is disabled if the allocation is performed by a kernel thread. This behavior was introduced from the very beginning by 7f33d49a2ed5 ("mm, PM/Freezer: Disable OOM killer when tasks are frozen"). This means that the basic contract for the allocation request is broken and the context requesting such an allocation might blow up unexpectedly. There are basically two ways forward. 1) move oom_killer_disable after kernel threads are frozen. This has a risk that the OOM victim wouldn't be able to finish because it would depend on an already frozen kernel thread. This would be really tricky to debug. 2) do not fail GFP_NOFAIL allocation no matter what and risk a potential Freezable kernel threads will loop and fail the suspend. Incidental allocations after kernel threads are frozen will at least dump a warning - if we are lucky and the serial console is still active of course... This patch implements the later option because it is safer. We would see warning rather than allocation failures for the kernel threads which would blow up otherwise and have a higher chances to identify __GFP_NOFAIL users from deeper pm code. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: David Rientjes <rientjes@gooogle.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:07 UTC |
8792f77 | Javier Martinez Canillas | 12 March 2015, 23:25:49 UTC | drivers/rtc/rtc-s3c.c: add .needs_src_clk to s3c6410 RTC data Commit df9e26d093d3 ("rtc: s3c: add support for RTC of Exynos3250 SoC") added an "rtc_src" DT property to specify the clock used as a source to the S3C real-time clock. Not all SoCs needs this so commit eaf3a659086e ("drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock") changed to check the struct s3c_rtc_data .needs_src_clk to conditionally grab the clock. But that commit didn't update the data for each IP version so the RTC broke on the boards that needs a source clock. This is the case of at least Exynos5250 and Exynos5440 which uses the s3c6410 RTC IP block. This commit fixes the S3C rtc on the Exynos5250 Snow and Exynos5420 Peach Pit and Pi Chromebooks. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Cc: Tyler Baker <tyler.baker@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:07 UTC |
18d585f | Mark Fasheh | 12 March 2015, 23:25:46 UTC | ocfs2: make append_dio an incompat feature It turns out that making this feature ro_compat isn't quite enough to prevent accidental corruption on mount from older kernels. Ocfs2 (like other file systems) will process orphaned inodes even when the user mounts in 'ro' mode. So for the case of a filesystem not knowing the append_dio feature, mounting the filesystem could result in orphaned-for-dio files being deleted, which we clearly don't want. So instead, turn this into an incompat flag. Btw, this is kind of my fault - initially I asked that we add a flag to cover the feature and even suggested that we use an ro flag. It wasn't until I was looking through our commits for v4.0-rc1 that I realized we actually want this to be incompat. Signed-off-by: Mark Fasheh <mfasheh@suse.de> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 March 2015, 01:46:07 UTC |
e2cdcaf | Dave Airlie | 12 March 2015, 23:21:24 UTC | Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Some additional radeon fixes for 4.0 * 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: drop setting UPLL to sleep mode drm/radeon: fix wait to actually occur after the signaling callback | 12 March 2015, 23:21:24 UTC |
552d664 | Dave Airlie | 12 March 2015, 23:15:56 UTC | Merge branch 'vmwgfx-fixes-4.0' of git://people.freedesktop.org/~thomash/linux into drm-fixes A couple of fixes for vmwgfx. * 'vmwgfx-fixes-4.0' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix an issue with the device losing its irq line on module unload drm/vmwgfx: Correctly NULLify dma buffer pointer on failure drm/vmwgfx: Reorder device takedown somewhat drm/vmwgfx: Fix a couple of lock dependency violations | 12 March 2015, 23:15:56 UTC |
17b263f | Dave Airlie | 12 March 2015, 23:15:01 UTC | Merge tag 'drm-intel-fixes-2015-03-12' of git://anongit.freedesktop.org/drm-intel into drm-fixes More i915 fixes, three out of four are fixes to old bugs, cc: stable. * tag 'drm-intel-fixes-2015-03-12' of git://anongit.freedesktop.org/drm-intel: drm/i915: Prevent TLB error on first execution on SNB drm/i915: Do both mt and gen6 style forcewake reset on ivb probe drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again drm/i915: use in_interrupt() not in_irq() to check context | 12 March 2015, 23:15:01 UTC |
ba68bc0 | Mel Gorman | 07 March 2015, 15:20:48 UTC | mm: thp: Return the correct value for change_huge_pmd The wrong value is being returned by change_huge_pmd since commit 10c1045f28e8 ("mm: numa: avoid unnecessary TLB flushes when setting NUMA hinting entries") which allows a fallthrough that tries to adjust non-existent PTEs. This patch corrects it. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 March 2015, 21:07:41 UTC |
2ddee91 | Takashi Iwai | 12 March 2015, 19:47:15 UTC | ALSA: hda - Add workaround for MacBook Air 5,2 built-in mic MacBook Air 5,2 has the same problem as MacBook Pro 8,1 where the built-in mic records only the right channel. Apply the same workaround as MBP8,1 to spread the mono channel via a Cirrus codec vendor-specific COEF setup. Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com> Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 March 2015, 19:50:32 UTC |
bad994f | Takashi Iwai | 12 March 2015, 19:28:04 UTC | ALSA: hda - Set single_adc_amp flag for CS420x codecs CS420x codecs seem to deal only the single amps of ADC nodes even though the nodes receive multiple inputs. This leads to the inconsistent amp value after S3/S4 resume, for example. The fix is just to set codec->single_adc_amp flag. Then the driver handles these ADC amps as if single connections. Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com> Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 March 2015, 19:28:04 UTC |
09d3591 | Linus Torvalds | 12 March 2015, 16:50:45 UTC | Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "An important bugfix for the I2C subsystem core" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: core: Dispose OF IRQ mapping at client removal time" | 12 March 2015, 16:50:45 UTC |
91e9134 | Linus Torvalds | 12 March 2015, 16:45:46 UTC | Merge tag 'pci-v4.0-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are a couple updates for v4.0. One fixes a config accessor problem on APM X-Gene that we introduced when switching to generic config accessors, and the other fixes an older read-past-end-of-buffer problem in sysfs. APM X-Gene host bridge driver - Add register offset to config space base address (Feng Kan) Miscellaneous - Don't read past the end of sysfs "driver_override" buffer (Sasha Levin)" * tag 'pci-v4.0-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: xgene: Add register offset to config space base address PCI: Don't read past the end of sysfs "driver_override" buffer | 12 March 2015, 16:45:46 UTC |
d3dd73f | Linus Torvalds | 12 March 2015, 16:34:10 UTC | Merge tag 'microblaze-4.0-rc4' of git://git.monstr.eu/linux-2.6-microblaze Pull arch/microblaze fixes from Michal Simek: "Fix syscall error recovery. Two patches - one is just preparation patch for the second which is fixing the problem with syscalls" * tag 'microblaze-4.0-rc4' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix syscall error recovery for invalid syscall IDs microblaze: Coding style cleanup | 12 March 2015, 16:34:10 UTC |
5627511 | Linus Torvalds | 12 March 2015, 16:23:30 UTC | Merge tag 'nios2-fix-4.0-rc4' of git://git.rocketboards.org/linux-socfpga-next Pull arch/nios2 fix from Ley Foon Tan: "Remove pt_regs from user header and use generic ucontext.h" * tag 'nios2-fix-4.0-rc4' of git://git.rocketboards.org/linux-socfpga-next: nios2: update pt_regs | 12 March 2015, 16:23:30 UTC |
ec76f40 | Alexey Kardashevskiy | 12 March 2015, 03:43:12 UTC | vfio-pci: Add missing break to enable VFIO_PCI_ERR_IRQ_INDEX This adds a missing break statement to VFIO_DEVICE_SET_IRQS handler without which vfio_pci_set_err_trigger() would never be called. While we are here, add another "break" to VFIO_PCI_REQ_IRQ_INDEX case so if we add more indexes later, we won't miss it. Fixes: 6140a8f56238 ("vfio-pci: Add device request interface") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> | 12 March 2015, 15:51:38 UTC |
53da3bc | Linus Torvalds | 12 March 2015, 15:45:46 UTC | mm: fix up numa read-only thread grouping logic Dave Chinner reported that commit 4d9424669946 ("mm: convert p[te|md]_mknonnuma and remaining page table manipulations") slowed down his xfsrepair test enormously. In particular, it was using more system time due to extra TLB flushing. The ultimate reason turns out to be how the change to use the regular page table accessor functions broke the NUMA grouping logic. The old special mknuma/mknonnuma code accessed the page table present bit and the magic NUMA bit directly, while the new code just changes the page protections using PROT_NONE and the regular vma protections. That sounds equivalent, and from a fault standpoint it really is, but a subtle side effect is that the *other* protection bits of the page table entries also change. And the code to decide how to group the NUMA entries together used the writable bit to decide whether a particular page was likely to be shared read-only or not. And with the change to make the NUMA handling use the regular permission setting functions, that writable bit was basically always cleared for private mappings due to COW. So even if the page actually ends up being written to in the end, the NUMA balancing would act as if it was always shared RO. This code is a heuristic anyway, so the fix - at least for now - is to instead check whether the page is dirty rather than writable. The bit doesn't change with protection changes. NOTE! This also adds a FIXME comment to revisit this issue, Not only should we probably re-visit the whole "is this a shared read-only page" heuristic (we might want to take the vma permissions into account and base this more on those than the per-page ones, and also look at whether the particular access that triggers it is a write or not), but the whole COW issue shows that we should think about the NUMA fault handling some more. For example, maybe we should do the early-COW thing that a regular fault does. Or maybe we should accept that while using the same bits as PROTNONE was a good thing (and got rid of the specual NUMA bit), we might still want to just preseve the other protection bits across NUMA faulting. Those are bigger questions, left for later. This just fixes up the heuristic so that it at least approximates working again. More analysis and work needed. Reported-by: Dave Chinner <david@fromorbit.com> Tested-by: Mel Gorman <mgorman@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org>, Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 March 2015, 15:45:46 UTC |
a494457 | Jakub Kicinski | 11 March 2015, 17:35:36 UTC | Revert "i2c: core: Dispose OF IRQ mapping at client removal time" This reverts commit e4df3a0b6228 ("i2c: core: Dispose OF IRQ mapping at client removal time") Calling irq_dispose_mapping() will destroy the mapping and disassociate the IRQ from the IRQ chip to which it belongs. Keeping it is OK, because existent mappings are reused properly. Also, this commit breaks drivers using devm* for IRQ management on OF-based systems because devm* cleanup happens in device code, after bus's remove() method returns. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [wsa: updated the commit message with findings fromt the other bug report] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Fixes: e4df3a0b6228 | 12 March 2015, 09:23:05 UTC |
fcdcd1d | Daniel Mack | 12 March 2015, 08:41:32 UTC | ALSA: snd-usb: add quirks for Roland UA-22 The device complies to the UAC1 standard but hides that fact with proprietary descriptors. The autodetect quirk for Roland devices catches the audio interface but misses the MIDI part, so a specific quirk is needed. Signed-off-by: Daniel Mack <daniel@zonque.org> Reported-by: Rafa Lafuente <rafalafuente@gmail.com> Tested-by: Raphaël Doursenaud <raphael@doursenaud.fr> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 March 2015, 09:19:49 UTC |
be3bb82 | Takashi Iwai | 11 March 2015, 17:12:49 UTC | ALSA: control: Add sanity checks for user ctl id name string There was no check about the id string of user control elements, so we accepted even a control element with an empty string, which is obviously bogus. This patch adds more sanity checks of id strings. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 March 2015, 06:36:38 UTC |
92d5dd8 | Chung-Ling Tang | 12 March 2015, 05:34:31 UTC | nios2: update pt_regs Remove struct pt_regs from user header and use generic ucontext.h. Signed-off-by: Chung-Ling Tang <cltang@codesourcery.com> Acked-by: Ley Foon Tan <lftan@altera.com> | 12 March 2015, 05:35:06 UTC |
aaa6d06 | Shawn Guo | 25 February 2015, 14:53:38 UTC | ASoC: kirkwood: fix struct clk pointer comparing Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> | 11 March 2015, 23:00:41 UTC |
81efec8 | Shawn Guo | 25 February 2015, 14:53:37 UTC | ASoC: fsl_spdif: fix struct clk pointer comparing Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> | 11 March 2015, 23:00:22 UTC |
a51139f | Shawn Guo | 25 February 2015, 14:53:32 UTC | ARM: imx: fix struct clk pointer comparing Since commit 035a61c314eb ("clk: Make clk API return per-user struct clk instances"), clk API users can no longer check if two struct clk pointers are pointing to the same hardware clock, i.e. struct clk_hw, by simply comparing two pointers. That's because with the per-user clk change, a brand new struct clk is created whenever clients try to look up the clock by calling clk_get() or sister functions like clk_get_sys() and of_clk_get(). This changes the original behavior where the struct clk is only created for once when clock driver registers the clock to CCF in the first place. The net change here is before commit 035a61c314eb the struct clk pointer is unique for given hardware clock, while after the commit the pointers returned by clk lookup calls become different for the same hardware clock. That said, the struct clk pointer comparing in the code doesn't work any more. Call helper function clk_is_match() instead to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> | 11 March 2015, 23:00:20 UTC |
3d3801e | Michael Turquette | 25 February 2015, 17:11:01 UTC | clk: introduce clk_is_match Some drivers compare struct clk pointers as a means of knowing if the two pointers reference the same clock hardware. This behavior is dubious (drivers must not dereference struct clk), but did not cause any regressions until the per-user struct clk patch was merged. Now the test for matching clk's will always fail with per-user struct clk's. clk_is_match is introduced to fix the regression and prevent drivers from comparing the pointers manually. Fixes: 035a61c314eb ("clk: Make clk API return per-user struct clk instances") Cc: Russell King <linux@arm.linux.org.uk> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Michael Turquette <mturquette@linaro.org> [arnd@arndb.de: Fix COMMON_CLK=N && HAS_CLK=Y config] Signed-off-by: Arnd Bergmann <arnd@arndb.de> [sboyd@codeaurora.org: const arguments to clk_is_match() and remove unnecessary ternary operation] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> | 11 March 2015, 22:56:59 UTC |
f55ac06 | Julia Lawall | 11 March 2015, 16:56:31 UTC | clk: don't export static symbol The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ type T; identifier f; @@ static T f (...) { ... } @@ identifier r.f; declarer name EXPORT_SYMBOL_GPL; @@ -EXPORT_SYMBOL_GPL(f); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Fixes: 035a61c314eb "clk: Make clk API return per-user struct clk instances" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> | 11 March 2015, 22:53:18 UTC |
b8ea351 | Josh Boyer | 11 March 2015, 00:26:36 UTC | Revert "cpupower Makefile change to help run the tool without 'make install'" This reverts commit 5c1de006e8e66b0be05be422416629e344c71652. While the original commit makes it easier to run cpupower from the local build directory, it also leaves the binary with a rather poor rpath of './' in it after it is installed on a system via 'make install'. This is considered bad practice and can cause cpupower to fail in rpmbuild with the following error: ERROR 0004: file '/usr/bin/cpupower' contains an insecure rpath './' in [./] error: Bad exit status from /var/tmp/rpm-tmp.A6u26r (%install) Bad exit status from /var/tmp/rpm-tmp.A6u26r (%install) Developers should be able to use LD_LIBRARY_PATH to achieve the same effect and not introduce rpath into the binary. Signed-off-by: Josh Boyer <jwboyer@feoraproject.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 11 March 2015, 20:56:49 UTC |
30fa7e0 | Arnd Bergmann | 11 March 2015, 19:46:52 UTC | Merge tag 'at91-fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Pull "Third fixes batch for AT91 on 4.0" from Nicolas Ferre: - clock fixes for USB - compatible string changes for handling USB IP differences (+ needed AHB matrix syscon) - fix of a compilation error in PM code * tag 'at91-fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91: pm_slowclock: fix the compilation error ARM: at91/dt: fix USB high-speed clock to select UTMI ARM: at91/dt: fix at91 udc compatible strings ARM: at91/dt: declare matrix node as a syscon device ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition | 11 March 2015, 19:46:52 UTC |
fd3e4d6 | Thomas Hellstrom | 10 March 2015, 18:07:40 UTC | drm/vmwgfx: Fix an issue with the device losing its irq line on module unload Starting with commit b4b55cda5874 ("x86/PCI: Refine the way to release PCI IRQ resources") the device lost its irq resource on module unload. While that's ok and apparently intentional, the driver never got the resource back on module load The code apparently wants drivers to disable the pci device at pci device driver removal, so lets do that. That fixes the issue. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> | 11 March 2015, 18:47:41 UTC |
da5efff | Colin Ian King | 22 January 2015, 15:17:07 UTC | drm/vmwgfx: Correctly NULLify dma buffer pointer on failure cppcheck on lines 917 and 977 show an ineffective assignment to the dma buffer pointer: [drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:917]: [drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:977]: (warning) Assignment of function parameter has no effect outside the function. Did you forget dereferencing it? On a successful DMA buffer lookup, the dma buffer pointer is assigned, however, on failure it currently is left in an undefined state. The original intention in the error exit path was to nullify the pointer on an error (which the original code failed to do properly). This patch fixes this also ensures all failure paths nullify the buffer pointer on the error return. Fortunately the callers to vmw_translate_mob_ptr and vmw_translate_guest_ptr are checking on a return status and not on the dma buffer pointer, so the original code worked. Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> | 11 March 2015, 18:47:41 UTC |
3458390 | Thomas Hellstrom | 05 March 2015, 10:33:24 UTC | drm/vmwgfx: Reorder device takedown somewhat To take down the MOB and GMR memory types, the driver may have to issue fence objects and thus make sure that the fence manager is taken down after those memory types. Reorder device init accordingly. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> | 11 March 2015, 18:47:40 UTC |
5151adb | Thomas Hellstrom | 09 March 2015, 08:56:21 UTC | drm/vmwgfx: Fix a couple of lock dependency violations Experimental lockdep annotation added to the TTM lock has unveiled a couple of lock dependency violations in the vmwgfx driver. In both cases it turns out that the device_private::reservation_sem is not needed so the offending code is moved out of that lock. Cc: <stable@vger.kernel.org> Acked-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> | 11 March 2015, 18:47:40 UTC |
9a0b574 | Michael Ellerman | 03 February 2015, 03:53:08 UTC | selftests/exec: Check if the syscall exists and bail if not On systems which don't implement sys_execveat(), this test produces a lot of output. Add a check at the beginning to see if the syscall is present, and if not just note one error and return. When we run on a system that doesn't implement the syscall we will get ENOSYS back from the kernel, so change the logic that handles __NR_execveat not being defined to also use ENOSYS rather than -ENOSYS. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: David Drysdale <drysdale@google.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> | 11 March 2015, 16:15:19 UTC |
ddb6ca7 | Takashi Iwai | 11 March 2015, 15:05:19 UTC | ALSA: hda - Fix built-in mic on Compaq Presario CQ60 Compaq Presario CQ60 laptop with CX20561 gives a wrong pin for the built-in mic NID 0x17 instead of NID 0x1d, and it results in the non-working mic. This patch just remaps the pin correctly via fixup. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=920604 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 11 March 2015, 15:05:19 UTC |
e7b848d | Wenyou Yang | 11 March 2015, 02:08:12 UTC | ARM: at91: pm_slowclock: fix the compilation error When compiling the kernel in thumb2 (CONFIG_THUMB2_KERNEL option activated), we hit a compilation crash. The error message is listed below: ---8< ----- Error: cannot use register index with PC-relative addressing -- `str r0,.saved_lpr' --->8---- Add the .arm directive in the assembly files related to power management. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> | 11 March 2015, 14:49:47 UTC |
3440ef1 | Nicolas Ferre | 09 March 2015, 15:51:13 UTC | ARM: at91/dt: fix USB high-speed clock to select UTMI The UTMI clock must be selected by any high-speed USB IP. The logic behind it needs this particular clock. So, correct the clock in the device tree files affected. Reported-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> #3.18 | 11 March 2015, 14:49:46 UTC |
70a9bea | Boris Brezillon | 03 December 2014, 11:32:10 UTC | ARM: at91/dt: fix at91 udc compatible strings The at91rm9200, at91sam9260, at91sam9261 and at91sam9263 SoCs have slightly different UDC IPs. Those differences were previously handled with cpu_is_at91xx macro which are about to be dropped for multi-platform support, thus we need to change compatible strings. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> | 11 March 2015, 14:49:46 UTC |
ea1c98b | Boris Brezillon | 03 December 2014, 11:32:09 UTC | ARM: at91/dt: declare matrix node as a syscon device There is no specific driver handling the AHB matrix, this is a simple syscon device. the matrix is needed by several other drivers including the USB on some SoCs (at91sam9261 for instance). Without this definition, the USB will not work on these SoCs. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> | 11 March 2015, 14:47:02 UTC |
b85b634 | Arnd Bergmann | 11 March 2015, 14:38:11 UTC | Merge tag 'imx-fixes-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "The i.MX fixes for 4.0" from Shawn Guo: It includes a couple of i.MX6 dts fixes, which set an input supply to vbus regulator. Without the fixes, the voltage of vbus is incorrect after system boots up. * tag 'imx-fixes-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx6sl-evk: set swbst_reg as vbus's parent reg ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg | 11 March 2015, 14:38:11 UTC |
01f3e35 | Sudeep Holla | 09 March 2015, 18:27:49 UTC | ARM: vexpress: update CONFIG_USB_ISP1760 option Commit 7ef077a8ad35 ("usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/") moved the isp1760 driver and changed the Kconfig option. This makes CONFIG_USB_ISP1760_HCD not selectable directly anymore. This results in driver being not compiled in when using vexpress_defconfig and the USB is non-functional. This patch updates the CONFIG_USB_ISP1760_HCD to CONFIG_USB_ISP1760 to get back USB functional on vexpress platforms. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reported-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 11 March 2015, 14:37:21 UTC |
16083d4 | Baruch Siach | 09 March 2015, 09:05:14 UTC | ARM: digicolor: add the machine directory to Makefile Make the digicolor specific DT_MACHINE_START entry visible. Fixes: df8d742e929 (ARM: initial support for Conexant Digicolor CX92755 SoC) Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 11 March 2015, 14:36:34 UTC |
0397da7 | Arnd Bergmann | 11 March 2015, 14:35:28 UTC | Merge tag 'fixes-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Pull "omap fixes against v4.0-rc2" from Tony Lindgren: Fixes for various omap variants, mostly minor fixes for various SoCs with the bigger changes being for the dra7 clocks and hwmod data: - Fix wl12xx for dm3730-evm - Fix omap4 prm save and clea - Fix hwmod clkdm use count - Fix hwmod data for pcie on dra7 - Fix lockdep for hwmod - Fix USB on most omap3 boars by enabling it in the defconfig - Fix the bypass clock source for omap5 and dra7 - Fix the ehrpwm clock for am33xx and am43xx - Enable AES and SHAM for BeagleBone white - Use rmii clock for am335x-lxm - Fix polling intervals for omap5 thermal zones - Fix slewctrl for am33xx and am43xx - Fix dra7-evm dcan pinctrl * tag 'fixes-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding ARM: dts: OMAP5: fix polling intervals for thermal zones ARM: dts: am335x-lxm: Use rmii-clock-ext ARM: dts: am335x-bone-common: enable aes and sham ARM: dts: am43xx-clocks: Fix ehrpwm tbclk data on am43xx ARM: dts: am33xx-clocks: Fix ehrpwm tbclk data on am33xx ARM: dts: OMAP5: Fix the bypass clock source for dpll_iva and others ARM: dts: DRA7x: Fix the bypass clock source for dpll_iva and others ARM: OMAP4+: PRM: fix omap4 version of prm_save_and_clear_irqen ARM: OMAP2+: hwmod: fix deassert hardreset clkdm usecounting ARM: DRA7: hwmod_data: Fix hwmod data for pcie ARM: omap2+: omap_hwmod: Set unique lock_class_key per hwmod | 11 March 2015, 14:35:28 UTC |
60b3c7e | Fabrice GASNIER | 05 March 2015, 15:53:54 UTC | ARM: STi: Add STiH410 SoC support This patch adds support to STiH410 SoC. Please note "st,stih410" is already present in device tree. The problem is that it is missing the entry in the match table, and so the L2 cache and other cpus than 0 don't get initialized. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Tested-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 11 March 2015, 14:34:45 UTC |
af6fc85 | Jan Beulich | 11 March 2015, 13:51:17 UTC | xen-pciback: limit guest control of command register Otherwise the guest can abuse that control to cause e.g. PCIe Unsupported Request responses by disabling memory and/or I/O decoding and subsequently causing (CPU side) accesses to the respective address ranges, which (depending on system configuration) may be fatal to the host. Note that to alter any of the bits collected together as PCI_COMMAND_GUEST permissive mode is now required to be enabled globally or on the specific device. This is CVE-2015-2150 / XSA-120. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com> | 11 March 2015, 14:34:40 UTC |
e762965 | Arnd Bergmann | 11 March 2015, 14:33:41 UTC | Merge tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Pull "Second fixes batch for AT91 on 4.0" from Nicolas Ferre: - little fix for !MMU debug: may also help for randconfig - fix of 2 errors in LCD clock definitions - in PM code, not writing the key leads to not execute the action * tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/pm: MOR register KEY was missing ARM: at91/dt: sama5d4: fix lcdck clock definition ARM: at91/dt: sama5d4: rename lcd_clk into lcdc_clk ARM: at91: debug: fix non MMU debug | 11 March 2015, 14:33:41 UTC |
8c11340 | Arnd Bergmann | 11 March 2015, 14:31:27 UTC | Merge tag 'socfpga_fixes_for_v4.0' of git://git.rocketboards.org/linux-socfpga-next into fixes Pull "Fixes for v4.0 on the SoCFPGA platform" from Dinh Nguyen: - Fix the SCU virtual mapping - Add misssing DMA channels for UART nodes - Fix a sporadic SMP error where CPU1 was not seeing its start address * tag 'socfpga_fixes_for_v4.0' of git://git.rocketboards.org/linux-socfpga-next: ARM: socfpga: make sure socfpga_cpu1start_addr is properly flushed ARM: socfpga: fix uart DMA binding error ARM: socfpga: Correct SCU virtual mapping in socfpga | 11 March 2015, 14:31:27 UTC |
142109d | Stefan Agner | 01 March 2015, 23:09:02 UTC | MAINTAINERS: add Freescale Vybrid SoC Add Freescale Vybrid family as a own entry, along with an entry for the so far orphan Vybrid device tree files. Also add myself as a designated reviewer. Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 11 March 2015, 14:30:47 UTC |
735783d | Matt Porter | 17 February 2015, 17:17:57 UTC | MAINTAINERS: Remove self as ARM mach-bcm co-maintainer Removing myself as a co-maintainer. Signed-off-by: Matt Porter <mporter@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 11 March 2015, 14:27:37 UTC |
a17d499 | Christian König | 19 February 2015, 08:40:28 UTC | drm/radeon: drop setting UPLL to sleep mode Just keep it working, seems to fix some PLL problems. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73378 Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org | 11 March 2015, 12:31:56 UTC |
b661010 | Maarten Lankhorst | 03 March 2015, 08:56:42 UTC | drm/radeon: fix wait to actually occur after the signaling callback A normal wait adds to the front of the tail. By doing something similar to fence_default_wait the fence code can run without racing. This is a complete fix for "panic on suspend from KDE with radeon", and a partial fix for "Radeon: System pauses on TAHITI". On tahiti si_irq_set needs to be fixed too, to completely flush the writes before radeon_fence_activity is called in radeon_fence_enable_signaling. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=90861 Signed-off-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com> Reported-by: Jon Arne Jørgensen <jonjon.arnearne@gmail.com> Reported-and-tested-by: Gustaw Smolarczyk <wielkiegie@gmail.com> Cc: stable@vger.kernel.org (v3.18+) Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 11 March 2015, 12:30:35 UTC |
2de9dd0 | Peter Chen | 06 March 2015, 08:04:21 UTC | ARM: imx6sl-evk: set swbst_reg as vbus's parent reg USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's parent reg, it fixed a bug that the voltage of vbus is incorrect due to swbst_reg is disabled after boots up. Cc: stable@vger.kernel.org Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 11 March 2015, 01:21:22 UTC |
40f7377 | Peter Chen | 06 March 2015, 08:04:20 UTC | ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's parent reg, it fixed a bug that the voltage of vbus is incorrect due to swbst_reg is disabled after boots up. Cc: stable@vger.kernel.org Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 11 March 2015, 01:21:06 UTC |
cca28a5 | Linus Torvalds | 11 March 2015, 00:44:34 UTC | Merge tag 'for-linus-20150310' of git://git.infradead.org/linux-mtd Pull MTD fixes from Brian Norris: * pxa3xx_nand - fix timeout issues when draining the FIFO (BCH only) - don't crash when no chip-selects are used * hisi504_nand - depend on HAS_DMA, to fix compile errors * tag 'for-linus-20150310' of git://git.infradead.org/linux-mtd: mtd: nand: MTD_NAND_HISI504 should depend on HAS_DMA mtd: pxa3xx_nand: fix driver when num_cs is 0 mtd: nand: pxa3xx: Fix PIO FIFO draining | 11 March 2015, 00:44:34 UTC |
9c3e132 | Linus Torvalds | 11 March 2015, 00:36:19 UTC | Merge tag 'iommu-fixes-v4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "The patches contain: - fix multiple ARM IOMMU drivers to behave well when the hardware is not present - mark MSM driver as broken - fix build errors with the new ARM generic io-page-table code" * tag 'iommu-fixes-v4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/io-pgtable-arm: Add built time dependency iommu/msm: Mark driver BROKEN iommu/rockchip: Play nice in multi-platform builds iommu/omap: Play nice in multi-platform builds iommu/exynos: Play nice in multi-platform builds iommu/io-pgtable-arm: Fix self-test WARNs on i386 | 11 March 2015, 00:36:19 UTC |
8cbba1a | Peter Hurley | 06 March 2015, 18:59:59 UTC | of: unittest: Add options string testcase variants Add testcase variants with '/' in the options string to test for scan beyond end path name terminated by ':'. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Rob Herring <robh@kernel.org> | 10 March 2015, 15:44:21 UTC |
106937e | Leif Lindholm | 06 March 2015, 16:52:53 UTC | of: fix handling of '/' in options for of_find_node_by_path() Ensure proper handling of paths with appended options (after ':'), where those options may contain a '/'. Fixes: 7914a7c5651a ("of: support passing console options with stdout-path") Reported-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Cc: <stable@vger.kernel.org> # 3.19 Signed-off-by: Rob Herring <robh@kernel.org> | 10 March 2015, 15:34:35 UTC |
649022e | Wang Long | 03 March 2015, 03:50:38 UTC | of/unittest: Fix the wrong expected value in of_selftest_property_string This patch fix the wrong expected value of of_property_match_string in of_selftest_property_string. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org> | 10 March 2015, 15:34:34 UTC |
dc6a945 | Wang Long | 02 March 2015, 06:49:21 UTC | of/unittest: remove the duplicate of_changeset_init Remove the duplicate of_changeset_init. In of_selftest_changeset testcase, the "struct of_changeset chgset" is initialized twice, but only once is enough. so, drop the first initializtion code. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org> | 10 March 2015, 15:34:34 UTC |
d1e9fa9 | Matt Porter | 05 March 2015, 15:53:11 UTC | dt: submitting-patches: clarify that DT maintainers are to be cced on bindings The exact steps provided for submitting binding patches can be read as requiring the bindings to be sent only to the devicetree@vger.kernel.org list. Since the DT maintainers would like to be Cced on any binding submissions, make this requirement explicit in step 2. Signed-off-by: Matt Porter <mporter@konsulko.com> Signed-off-by: Rob Herring <robh@kernel.org> | 10 March 2015, 15:34:33 UTC |
4252de3 | Arnd Bergmann | 04 March 2015, 19:49:47 UTC | of: unittest: fix I2C dependency The unittest fails to link if I2C or I2C_MUX is a loadable module: drivers/built-in.o: In function `selftest_i2c_mux_remove': unittest.c:(.text+0xb0ce4): undefined reference to `i2c_del_mux_adapter' This changes the newly added IS_ENABLED() checks to use IS_BUILTIN() instead, which evaluates to false if the other driver is a module. Reported-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: d5e75500ca401 ("of: unitest: Add I2C overlay unit tests.") Signed-off-by: Rob Herring <robh@kernel.org> | 10 March 2015, 15:34:33 UTC |
d3a8916 | Fabio Estevam | 03 March 2015, 13:04:45 UTC | of/overlay: Remove unused variable Commit 3e7f7626fd49a ("of/overlay: Do not generate duplicate nodes") removed the only use of the 'grandchild' variable, which leads to the following build warning: drivers/of/overlay.c: In function 'of_overlay_apply_single_device_node': drivers/of/overlay.c:89:31: warning: unused variable 'grandchild' [-Wunused-variable] struct device_node *tchild, *grandchild; ^ Remove this unused variable. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Rob Herring <robh@kernel.org> | 10 March 2015, 15:34:33 UTC |
20aa4d8 | Chunyan Zhang | 16 January 2015, 10:00:07 UTC | Documentation: DT: Renamed of-serial.txt to 8250.txt The file of-serial.txt was only for 8250 compatible UART implementations, so renamed it to 8250.txt to avoid confusing other persons. This is suggested by Arnd, see: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/291455.html Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> | 10 March 2015, 15:34:32 UTC |
2fa645c | Peter Hurley | 01 March 2015, 17:21:22 UTC | of: Fix premature bootconsole disable with 'stdout-path' Support for devicetree serial consoles via 'stdout-path' causes bootconsoles to be disabled when the vt dummy console loads, since there is no preferred console (the preferred console is not added until the device is probed). Ensure there is at least a preferred console, even if never matched. Requires: "console: Fix console name size mismatch" Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Rob Herring <robh@kernel.org> | 10 March 2015, 15:27:21 UTC |
59294a0 | Takashi Sakamoto | 10 March 2015, 12:54:35 UTC | ALSA: firewire-lib: leave unit reference counting completely With previous commit, this module managed to leave the counting to each drivers, but the isochronous resources functionality still increment/decrement the count. This commit purge such codes to leave the responsibility to each drivers. Fix: c6f224dc20ad ('ALSA: firewire-lib: remove reference counting') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 10 March 2015, 14:27:19 UTC |
5b1274e | Takashi Sakamoto | 10 March 2015, 12:58:48 UTC | Revert "ALSA: dice: fix wrong offsets for Dice interface" This reverts commit 8cdebf71098c07168ef6335e2f1f35d85dbe3049. The reverted commit breaks out-stream functionality of Dice driver. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 10 March 2015, 14:26:25 UTC |