Revision 07998281c268592963e1cd623fe6ab0270b65ae4 authored by Florian Westphal on 05 February 2021, 11:56:43 UTC, committed by Pablo Neira Ayuso on 08 February 2021, 23:04:14 UTC
The origin skip check needs to re-test the zone. Else, we might skip
a colliding tuple in the reply direction.

This only occurs when using 'directional zones' where origin tuples
reside in different zones but the reply tuples share the same zone.

This causes the new conntrack entry to be dropped at confirmation time
because NAT clash resolution was elided.

Fixes: 4e35c1cb9460240 ("netfilter: nf_nat: skip nat clash resolution for same-origin entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
1 parent ce7536b
Raw File
xgene-hwmon.rst
Kernel driver xgene-hwmon
=========================

Supported chips:

 * APM X-Gene SoC

Description
-----------

This driver adds hardware temperature and power reading support for
APM X-Gene SoC using the mailbox communication interface.
For device tree, it is the standard DT mailbox.
For ACPI, it is the PCC mailbox.

The following sensors are supported

  * Temperature
      - SoC on-die temperature in milli-degree C
      - Alarm when high/over temperature occurs

  * Power
      - CPU power in uW
      - IO power in uW

sysfs-Interface
---------------

temp0_input
	- SoC on-die temperature (milli-degree C)
temp0_critical_alarm
	- An 1 would indicates on-die temperature exceeded threshold
power0_input
	- CPU power in (uW)
power1_input
	- IO power in (uW)
back to top