https://github.com/Kitware/CMake
Revision 089fe1c13d8fa73be5182162a855c17351d1f918 authored by Stephen Kelly on 01 February 2013, 08:38:40 UTC, committed by Stephen Kelly on 02 February 2013, 14:06:53 UTC
While porting boost to use these features, the generation step took too long (several minutes before I stopped it). The reason was that the boost libraries form a large interdependent mesh. The libraries list their dependencies in their INTERFACE such as: $<LINKED:boost::core>;$<LINKED:boost::config>;$<LINKED:boost::mpl> As boost::core already depends on the boost::config libraries, that expression has no impact on the end-content, as it is removed after the generation step. There is no DAG issue though, so the generator expression evaluation would fully evaluate them. In the case of the config library, it also depends on the core library, so all depends are followed through that again, despite the fact that they've just been evaluated. After this patch, the evaluation skips libraries if they have already been seen via depends or directly in the content. This patch keeps track of targets whose INTERFACE has been consumed already. The INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS properties are whitelisted because repeated content will be stripped out later during generation. For other properties now and in the future, that may not be the case.
1 parent 179f495
Tip revision: 089fe1c13d8fa73be5182162a855c17351d1f918 authored by Stephen Kelly on 01 February 2013, 08:38:40 UTC
Optimize genex evaluation for includes and defines.
Optimize genex evaluation for includes and defines.
Tip revision: 089fe1c
CMakeLists.txt
# a macro for tests that have a simple format where the name matches the
# directory and project
macro(ADD_TEST_MACRO NAME COMMAND)
string(REPLACE "." "/" dir "${NAME}")
string(REGEX REPLACE "[^.]*\\." "" proj "${NAME}")
add_test(${NAME} ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/${dir}"
"${CMake_BINARY_DIR}/Tests/${dir}"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project ${proj}
${${NAME}_EXTRA_OPTIONS}
--test-command ${COMMAND} ${ARGN})
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/${dir}")
endmacro()
macro(REGEX_ESCAPE_STRING _OUT _IN)
# Escape special regex metacharacters with a backslash
string(REGEX REPLACE "([$^.[|*+?()]|])" "\\\\\\1" ${_OUT} "${_IN}")
endmacro()
include(${CMAKE_CURRENT_SOURCE_DIR}/CheckFortran.cmake)
# Fake a user home directory to avoid polluting the real one.
if(DEFINED ENV{HOME} AND NOT CTEST_NO_TEST_HOME)
set(TEST_HOME "${CMake_BINARY_DIR}/Tests/CMakeFiles/TestHome")
file(MAKE_DIRECTORY "${TEST_HOME}")
file(WRITE "${TEST_HOME}/.cvspass" ":pserver:anoncvs@www.cmake.org:/cvsroot/KWSys A\n")
set(TEST_HOME_ENV_CODE "# Fake a user home directory to avoid polluting the real one.
# But provide original ENV{HOME} value in ENV{CTEST_REAL_HOME} for tests that
# need access to the real HOME directory.
set(ENV{CTEST_REAL_HOME} \"\$ENV{HOME}\")
set(ENV{HOME} \"${TEST_HOME}\")
")
endif()
# Choose a default configuration for CTest tests.
set(CTestTest_CONFIG Debug)
if(NOT CMAKE_CONFIGURATION_TYPES AND CMAKE_BUILD_TYPE)
set(CTestTest_CONFIG ${CMAKE_BUILD_TYPE})
endif()
configure_file(${CMake_SOURCE_DIR}/Tests/EnforceConfig.cmake.in
${CMake_BINARY_DIR}/Tests/EnforceConfig.cmake @ONLY)
# Testing
if(BUILD_TESTING)
if("${CMAKE_TEST_GENERATOR}" MATCHES "Unix Makefiles" OR ("${CMAKE_TEST_GENERATOR}" MATCHES Ninja AND NOT WIN32))
set(TEST_CompileCommandOutput 1)
endif()
add_subdirectory(CMakeLib)
add_subdirectory(CMakeOnly)
add_subdirectory(RunCMake)
add_subdirectory(FindPackageModeMakefileTest)
add_subdirectory(CTestTestMemcheck)
# Collect a list of all test build directories.
set(TEST_BUILD_DIRS)
# Should the long tests be run?
option(CMAKE_RUN_LONG_TESTS
"Should the long tests be run (such as Bootstrap)." ON)
mark_as_advanced(CMAKE_RUN_LONG_TESTS)
if (CMAKE_RUN_LONG_TESTS)
option(CTEST_TEST_CTEST
"Should the tests that run a full sub ctest process be run?"
OFF)
mark_as_advanced(CTEST_TEST_CTEST)
endif ()
# Should tests that use CVS be run?
#
set(do_cvs_tests 0)
if(EXISTS ${CMAKE_ROOT}/Modules/FindCVS.cmake)
find_package(CVS QUIET)
else()
find_program(CVS_EXECUTABLE NAMES cvs)
endif()
if(CVS_EXECUTABLE)
set(do_cvs_tests 1)
endif()
if(do_cvs_tests AND NOT UNIX)
if("${CVS_EXECUTABLE}" MATCHES "cygwin")
set(do_cvs_tests 0)
endif()
endif()
# Should CPack tests be run? By default, yes, but...
#
# Disable packaging test on Apple 10.3 and below. PackageMaker starts
# DiskManagementTool as root and disowns it
# (http://lists.apple.com/archives/installer-dev/2005/Jul/msg00005.html).
# It is left holding open pipe handles and preventing ProcessUNIX from
# detecting end-of-data even after its immediate child exits. Then
# the test hangs until it times out and is killed. This is a
# well-known bug in kwsys process execution that I would love to get
# time to fix.
#
option(CTEST_TEST_CPACK
"Should the tests that use '--build-target package' be run?"
ON)
mark_as_advanced(CTEST_TEST_CPACK)
set(CTEST_TEST_OSX_ARCH 0)
if(APPLE)
execute_process(
COMMAND sw_vers -productVersion
OUTPUT_VARIABLE OSX_VERSION
OUTPUT_STRIP_TRAILING_WHITESPACE
)
if(OSX_VERSION MATCHES "^10\\.[0123]" OR OSX_VERSION MATCHES "ProductVersion:\t10\\.[0123]")
message(STATUS "Forcing CTEST_TEST_CPACK=OFF on OSX < 10.4")
message(STATUS "OSX_VERSION='${OSX_VERSION}'")
set(CTEST_TEST_CPACK OFF)
else()
set(CTEST_TEST_OSX_ARCH 1)
endif()
endif()
# Use 1500 or CTEST_TEST_TIMEOUT for long test timeout value,
# whichever is greater.
set(CMAKE_LONG_TEST_TIMEOUT 1500)
if(CTEST_TEST_TIMEOUT)
set(CMAKE_LONG_TEST_TIMEOUT ${CTEST_TEST_TIMEOUT})
endif()
if(CMAKE_LONG_TEST_TIMEOUT LESS 1500)
set(CMAKE_LONG_TEST_TIMEOUT 1500)
endif()
# add a bunch of standard build-and-test style tests
ADD_TEST_MACRO(CommandLineTest CommandLineTest)
ADD_TEST_MACRO(FindPackageTest FindPackageTest)
ADD_TEST_MACRO(FindModulesExecuteAll FindModulesExecuteAll)
ADD_TEST_MACRO(StringFileTest StringFileTest)
ADD_TEST_MACRO(TryCompile TryCompile)
ADD_TEST_MACRO(TarTest TarTest)
ADD_TEST_MACRO(SystemInformation SystemInformation)
ADD_TEST_MACRO(MathTest MathTest)
# assume no resources building to test
set(TEST_RESOURCES FALSE)
# for windows and cygwin assume we have resources
if(WIN32 OR CYGWIN)
set(TEST_RESOURCES TRUE)
endif()
# for borland and watcom there is no resource support
if("${CMAKE_TEST_GENERATOR}" MATCHES "WMake" OR
"${CMAKE_TEST_GENERATOR}" MATCHES "Borland")
set(TEST_RESOURCES FALSE)
endif()
if(TEST_RESOURCES)
ADD_TEST_MACRO(VSResource VSResource)
endif()
ADD_TEST_MACRO(Simple Simple)
ADD_TEST_MACRO(PreOrder PreOrder)
ADD_TEST_MACRO(MissingSourceFile MissingSourceFile)
set_tests_properties(MissingSourceFile PROPERTIES
PASS_REGULAR_EXPRESSION "CMake Error at CMakeLists.txt:3 \\(add_executable\\):[ \r\n]*Cannot find source file:[ \r\n]*DoesNotExist/MissingSourceFile.c")
if(CMAKE_Fortran_COMPILER)
ADD_TEST_MACRO(FortranOnly FortranOnly)
endif()
# test Visual Studio GNU Fortran mixing with cmake_add_fortran_subdirectory
# run this project if we have a working fortran compiler or
# the test is enabled with CMAKE_TEST_CMAKE_ADD_FORTRAN cache variable.
# If you enable the test, CMake should find the MinGW fortran install,
# or in some cases you might need to set the PATH so that cmake can find
# the gfortran from mingw.
if(CMAKE_Fortran_COMPILER OR CMAKE_TEST_CMAKE_ADD_FORTRAN)
set(CMAKE_SKIP_VSGNUFortran FALSE)
# disable test for apple builds using ifort if they are building
# more than one architecture, as ifort does not support that.
if(APPLE AND (CMAKE_Fortran_COMPILER MATCHES ifort))
list(LENGTH CMAKE_OSX_ARCHITECTURES len)
if("${len}" GREATER 1)
message(STATUS "Skip VSGNUFortran for ifort dual cpu mac build")
set(CMAKE_SKIP_VSGNUFortran TRUE)
endif()
endif()
if((CMAKE_C_COMPILER MATCHES lsb)
AND (CMAKE_Fortran_COMPILER MATCHES ifort))
message(STATUS "Skip VSGNUFortran for ifort and lsb compilers")
set(CMAKE_SKIP_VSGNUFortran TRUE)
endif()
if(NOT CMAKE_SKIP_VSGNUFortran)
ADD_TEST_MACRO(VSGNUFortran ${CMAKE_COMMAND} -P runtest.cmake)
endif()
endif()
ADD_TEST_MACRO(COnly COnly)
ADD_TEST_MACRO(CxxOnly CxxOnly)
ADD_TEST_MACRO(IPO COnly/COnly)
ADD_TEST_MACRO(OutDir runtime/OutDir)
ADD_TEST_MACRO(ObjectLibrary UseCshared)
ADD_TEST_MACRO(NewlineArgs NewlineArgs)
ADD_TEST_MACRO(SetLang SetLang)
ADD_TEST_MACRO(ExternalOBJ ExternalOBJ)
ADD_TEST_MACRO(LoadCommand LoadedCommand)
ADD_TEST_MACRO(LinkDirectory bin/LinkDirectory)
ADD_TEST_MACRO(LinkLanguage LinkLanguage)
ADD_TEST_MACRO(LinkLine LinkLine)
ADD_TEST_MACRO(MacroTest miniMacroTest)
ADD_TEST_MACRO(FunctionTest miniFunctionTest)
ADD_TEST_MACRO(ReturnTest ReturnTest)
ADD_TEST_MACRO(Properties Properties)
ADD_TEST_MACRO(Assembler HelloAsm)
ADD_TEST_MACRO(SourceGroups SourceGroups)
ADD_TEST_MACRO(Preprocess Preprocess)
ADD_TEST_MACRO(ExportImport ExportImport)
ADD_TEST_MACRO(Unset Unset)
ADD_TEST_MACRO(PolicyScope PolicyScope)
ADD_TEST_MACRO(EmptyLibrary EmptyLibrary)
ADD_TEST_MACRO(CompileDefinitions CompileDefinitions)
ADD_TEST_MACRO(CompatibleInterface CompatibleInterface)
set_tests_properties(EmptyLibrary PROPERTIES
PASS_REGULAR_EXPRESSION "CMake Error: CMake can not determine linker language for target:test")
ADD_TEST_MACRO(CrossCompile CrossCompile)
set_tests_properties(CrossCompile PROPERTIES
PASS_REGULAR_EXPRESSION "TRY_RUN.. invoked in cross-compiling mode")
if("${CMAKE_TEST_GENERATOR}" MATCHES "Make")
ADD_TEST_MACRO(Policy0002 Policy0002)
endif()
if(CTEST_TEST_OSX_ARCH)
ADD_TEST_MACRO(Architecture Architecture)
set_tests_properties(Architecture PROPERTIES
PASS_REGULAR_EXPRESSION "(file is not of required architecture|does not match cputype|not the architecture being linked)")
endif()
list(APPEND TEST_BUILD_DIRS ${CMake_TEST_INSTALL_PREFIX})
if(NOT QT4_FOUND)
find_package(Qt4)
endif()
if(QT4_FOUND)
# test whether the Qt4 which has been found works, on some machines
# which run nightly builds there were errors like "wrong file format"
# for libQtCore.so. So first check it works, and only if it does add
# the automoc test.
include(CheckCXXSourceCompiles)
set(_save_CMAKE_REQUIRED_INCLUDES "${CMAKE_REQUIRED_INCLUDES}")
set(_save_CMAKE_REQUIRED_LIBRARIES "${CMAKE_REQUIRED_LIBRARIES}")
set(CMAKE_REQUIRED_INCLUDES ${QT_INCLUDES})
set(CMAKE_REQUIRED_LIBRARIES ${QT_QTCORE_LIBRARIES})
CHECK_CXX_SOURCE_COMPILES("#include <QCoreApplication>\n int main() {return (qApp == 0 ? 0 : 1); }\n"
QT4_WORKS)
set(CMAKE_REQUIRED_INCLUDES "${_save_CMAKE_REQUIRED_INCLUDES}")
set(CMAKE_REQUIRED_LIBRARIES "${_save_CMAKE_REQUIRED_LIBRARIES}")
endif()
# run test for BundleUtilities on supported platforms/compilers
if(MSVC OR
CMAKE_SYSTEM_NAME MATCHES "Linux" OR
CMAKE_SYSTEM_NAME MATCHES "Darwin")
if(NOT "${CMAKE_TEST_GENERATOR}" STREQUAL "Watcom WMake")
add_test(BundleUtilities ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/BundleUtilities"
"${CMake_BINARY_DIR}/Tests/BundleUtilities"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project BundleUtilities
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/BundleUtilities")
# run test for DeployQt4 on supported platforms/compilers (which depends on BundleUtilities)
# this test also depends on the existence of the standard qtiff plugin
if(QT4_WORKS AND QT_QTSQL_FOUND)
add_test(Qt4Deploy ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Qt4Deploy"
"${CMake_BINARY_DIR}/Tests/Qt4Deploy"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project Qt4Deploy
--build-options
-DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE}
-DQT_QMAKE_EXECUTABLE:FILEPATH=${QT_QMAKE_EXECUTABLE}
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Qt4Deploy")
endif()
endif()
endif()
set(CMAKE_BUILD_TEST_SOURCE_DIR "${CMake_SOURCE_DIR}/Tests/COnly")
set(CMAKE_BUILD_TEST_BINARY_DIR "${CMake_BINARY_DIR}/Tests/CMakeBuildCOnly")
set(CMAKE_BUILD_TEST_EXE COnly)
configure_file("${CMake_SOURCE_DIR}/Tests/CMakeBuildTest.cmake.in"
"${CMake_BINARY_DIR}/Tests/CMakeBuildTest.cmake" @ONLY)
add_test(CMakeBuildTest ${CMAKE_CMAKE_COMMAND} -P
"${CMake_BINARY_DIR}/Tests/CMakeBuildTest.cmake")
list(APPEND TEST_BUILD_DIRS ${CMAKE_BUILD_TEST_BINARY_DIR})
# now do it again for a project that has two project commands
set(CMAKE_BUILD_TEST_SOURCE_DIR "${CMake_SOURCE_DIR}/Tests/DoubleProject")
set(CMAKE_BUILD_TEST_BINARY_DIR "${CMake_BINARY_DIR}/Tests/DoubleProject")
set(CMAKE_BUILD_TEST_EXE just_silly)
configure_file("${CMake_SOURCE_DIR}/Tests/CMakeBuildTest.cmake.in"
"${CMake_BINARY_DIR}/Tests/CMakeBuildDoubleProjectTest.cmake" @ONLY)
add_test(CMakeDoubleProject ${CMAKE_CMAKE_COMMAND} -P
"${CMake_BINARY_DIR}/Tests/CMakeBuildDoubleProjectTest.cmake")
list(APPEND TEST_BUILD_DIRS ${CMAKE_BUILD_TEST_BINARY_DIR})
ADD_TEST_MACRO(Module.CheckTypeSize CheckTypeSize)
ADD_TEST_MACRO(Module.GenerateExportHeader GenerateExportHeader)
if (APPLE OR CMAKE_CXX_COMPILER_ID MATCHES "GNU")
include(CheckCXXCompilerFlag)
check_cxx_compiler_flag(-fPIE run_pic_test)
else()
if (CMAKE_CXX_COMPILER_ID MATCHES "PGI"
OR CMAKE_CXX_COMPILER_ID MATCHES "PathScale"
OR CMAKE_SYSTEM_NAME MATCHES "IRIX64"
OR CMAKE_CXX_COMPILER_ID MATCHES "Intel")
set(run_pic_test 0)
else()
set(run_pic_test 1)
endif()
endif()
if (run_pic_test)
ADD_TEST_MACRO(PositionIndependentTargets PositionIndependentTargets)
endif()
add_test(LinkFlags-prepare
${CMAKE_CTEST_COMMAND} -C \${CTEST_CONFIGURATION_TYPE}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/LinkFlags"
"${CMake_BINARY_DIR}/Tests/LinkFlags"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project LinkFlags
--build-target LinkFlags
--build-options -DTEST_CONFIG=\${CTEST_CONFIGURATION_TYPE}
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/LinkFlags")
macro(ADD_LINK_FLAGS_TEST name depends)
add_test(LinkFlags-${name}
${CMAKE_CMAKE_COMMAND} --build "${CMake_BINARY_DIR}/Tests/LinkFlags"
--target LinkFlags_${name} --config \${CTEST_CONFIGURATION_TYPE}
)
set_tests_properties(LinkFlags-${name} PROPERTIES
PASS_REGULAR_EXPRESSION "BADFLAG" DEPENDS LinkFlags-${depends})
endmacro()
ADD_LINK_FLAGS_TEST(lib prepare)
ADD_LINK_FLAGS_TEST(dll lib)
ADD_LINK_FLAGS_TEST(exe dll)
ADD_LINK_FLAGS_TEST(lib_config exe)
ADD_LINK_FLAGS_TEST(dll_config lib_config)
ADD_LINK_FLAGS_TEST(exe_config dll_config)
# If we are running right now with a UnixMakefiles based generator,
# build the "Simple" test with the ExtraGenerators, if available
# This doesn't test whether the generated project files work (unfortunately),
# mainly it tests that cmake doesn't crash when generating these project files.
if(${CMAKE_TEST_GENERATOR} MATCHES "Unix Makefiles" OR ${CMAKE_TEST_GENERATOR} MATCHES "KDevelop")
# check which generators we have
exec_program(${CMAKE_CMAKE_COMMAND} ARGS --help OUTPUT_VARIABLE cmakeOutput )
# check for the Eclipse generator
if ("${cmakeOutput}" MATCHES Eclipse)
add_test(Simple_EclipseGenerator ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Simple"
"${CMake_BINARY_DIR}/Tests/Simple_EclipseGenerator"
--build-two-config
--build-generator "Eclipse CDT4 - Unix Makefiles"
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project Simple
--test-command Simple)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Simple_EclipseGenerator")
endif ()
# check for the CodeBlocks generator
if ("${cmakeOutput}" MATCHES CodeBlocks)
add_test(Simple_CodeBlocksGenerator ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Simple"
"${CMake_BINARY_DIR}/Tests/Simple_CodeBlocksGenerator"
--build-two-config
--build-generator "CodeBlocks - Unix Makefiles"
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project Simple
--test-command Simple)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Simple_CodeBlocksGenerator")
endif ()
# check for the KDevelop3 generator
if ("${cmakeOutput}" MATCHES KDevelop3)
add_test(Simple_KDevelop3Generator ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Simple"
"${CMake_BINARY_DIR}/Tests/Simple_KDevelop3Generator"
--build-two-config
--build-generator "KDevelop3 - Unix Makefiles"
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project Simple
--test-command Simple)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Simple_KDevelop3Generator")
endif ()
endif()
# test for correct sub-project generation
# not implemented in VS6 or Xcode
if(NOT MSVC60 AND NOT XCODE AND NOT MSVC70)
# run cmake and configure all of SubProject
# but only build the independent executable car
add_test(SubProject ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/SubProject"
"${CMake_BINARY_DIR}/Tests/SubProject"
--build-project SubProject
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-target car
--test-command car
)
if(${CMAKE_TEST_GENERATOR} MATCHES "Ninja")
# The Ninja generator does not create a recursive build system. Start
# from the root directory.
set(SubProject_SUBDIR)
else()
set(SubProject_SUBDIR "/foo")
endif()
# For stage 2, do not run cmake again.
# Then build the foo sub project which should build
# the bar library which should be referenced because
# foo links to the static library bar, but bar is not
# directly in the foo sub project
add_test(SubProject-Stage2 ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/SubProject${SubProject_SUBDIR}"
"${CMake_BINARY_DIR}/Tests/SubProject${SubProject_SUBDIR}"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-nocmake
--build-project foo
--build-target foo
--build-exe-dir "${CMake_BINARY_DIR}/Tests/SubProject/foo"
--test-command foo
)
set_tests_properties ( SubProject-Stage2 PROPERTIES DEPENDS SubProject)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/SubProject")
endif()
if (CMAKE_STRICT)
ADD_TEST_MACRO(DocTest DocTest)
endif ()
# macro to add a test that will build a nightly release
# of CMake for given platform using the release scripts
macro(ADD_NIGHTLY_BUILD_TEST name script)
set(_TEST_DIR "${CMake_BINARY_DIR}/Tests/${name}")
file(MAKE_DIRECTORY "${_TEST_DIR}")
file(WRITE "${_TEST_DIR}/nightly-cmake.sh"
"cd ${_TEST_DIR}
${CMake_BINARY_DIR}/bin/cmake -DCMAKE_CREATE_VERSION=nightly -P ${CMake_SOURCE_DIR}/Utilities/Release/${script}
${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/Release/upload_release.cmake
")
add_test(${name} /bin/sh ${_TEST_DIR}/nightly-cmake.sh)
if(COMMAND SET_TESTS_PROPERTIES AND COMMAND GET_TEST_PROPERTY)
set_tests_properties (${name} PROPERTIES TIMEOUT ${CMAKE_LONG_TEST_TIMEOUT})
endif()
endmacro()
if(CMAKE_BUILD_NIGHTLY_RELEASES)
ADD_NIGHTLY_BUILD_TEST(CMakeNightlyWindows
dash2win64_release.cmake)
ADD_NIGHTLY_BUILD_TEST(CMakeNightlyMac
dashmacmini2_release.cmake)
ADD_NIGHTLY_BUILD_TEST(CMakeNightlyMac64
dashmacmini5_release.cmake)
ADD_NIGHTLY_BUILD_TEST(CMakeNightlyLinux
magrathea_release.cmake)
endif()
# add tests with more complex invocations
add_test(Framework ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Framework"
"${CMake_BINARY_DIR}/Tests/Framework"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project Framework
--build-options
"-DCMAKE_INSTALL_PREFIX:PATH=${CMake_BINARY_DIR}/Tests/Framework/Install"
--test-command bar)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Framework")
add_test(TargetName ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/TargetName"
"${CMake_BINARY_DIR}/Tests/TargetName"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project TargetName
--test-command ${CMAKE_CMAKE_COMMAND} -E compare_files
${CMake_SOURCE_DIR}/Tests/TargetName/scripts/hello_world
${CMake_BINARY_DIR}/Tests/TargetName/scripts/hello_world)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/TargetName")
add_test(LibName ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/LibName"
"${CMake_BINARY_DIR}/Tests/LibName"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project LibName
--build-exe-dir "${CMake_BINARY_DIR}/Tests/LibName/lib"
--test-command foobar
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/LibName")
add_test(CustComDepend ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/CustComDepend"
"${CMake_BINARY_DIR}/Tests/CustComDepend"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project CustComDepend
--build-exe-dir "${CMake_BINARY_DIR}/Tests/CustComDepend/bin"
--test-command foo bar.c
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/CustComDepend")
add_test(ArgumentExpansion ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/ArgumentExpansion"
"${CMake_BINARY_DIR}/Tests/ArgumentExpansion"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project ArgumentExpansion
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/ArgumentExpansion/bin"
)
set_tests_properties(ArgumentExpansion PROPERTIES
FAIL_REGULAR_EXPRESSION "Unexpected: ")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/ArgumentExpansion")
add_test(GeneratorExpression ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/GeneratorExpression"
"${CMake_BINARY_DIR}/Tests/GeneratorExpression"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project GeneratorExpression
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-options -DCMAKE_BUILD_TYPE=\${CTEST_CONFIGURATION_TYPE}
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/GeneratorExpression")
add_test(CustomCommand ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/CustomCommand"
"${CMake_BINARY_DIR}/Tests/CustomCommand"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project CustomCommand
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/CustomCommand/bin"
--test-command CustomCommand
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/CustomCommand")
ADD_TEST_MACRO(EmptyDepends ${CMAKE_CTEST_COMMAND})
add_test(CustomCommandWorkingDirectory ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/CustomCommandWorkingDirectory"
"${CMake_BINARY_DIR}/Tests/CustomCommandWorkingDirectory"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project TestWorkingDir
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command working
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/CustomCommandWorkingDirectory")
#add_test(SimpleExclude ${CMAKE_CTEST_COMMAND}
# --build-and-test
# "${CMake_SOURCE_DIR}/Tests/SimpleExclude"
# "${CMake_BINARY_DIR}/Tests/SimpleExclude"
# --build-generator ${CMAKE_TEST_GENERATOR}
# --build-project SimpleExclude
# --build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
# --build-two-config
# --test-command t4
#--test-command "${CMAKE_COMMAND}"
#"-DCONFIGURATION=\${CTEST_CONFIGURATION_TYPE}"
#-P "${CMake_BINARY_DIR}/Tests/SimpleExclude/run.cmake"
#)
# add_test(SameName ${CMAKE_CTEST_COMMAND}
# --build-and-test
# "${CMake_SOURCE_DIR}/Tests/SameName"
# "${CMake_BINARY_DIR}/Tests/SameName"
# --build-generator ${CMAKE_TEST_GENERATOR}
# --build-project SameName
# --build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
# --build-two-config
# --test-command
# "${CMake_BINARY_DIR}/Tests/SameName/Exe1/mytest2")
add_test(OutOfSource ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/OutOfSource"
"${CMake_BINARY_DIR}/Tests/OutOfSource"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project OutOfSource
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-two-config
--test-command
"${CMake_BINARY_DIR}/Tests/OutOfSource/SubDir/OutOfSourceSubdir/simple")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/OutOfSource")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/OutOfSourceDeep")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/OutOfBinary")
add_test(BuildDepends ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/BuildDepends"
"${CMake_BINARY_DIR}/Tests/BuildDepends"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project BuildDepends
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/BuildDepends")
set(SimpleInstallInstallDir
"${CMake_BINARY_DIR}/Tests/SimpleInstall/InstallDirectory")
add_test(SimpleInstall ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/SimpleInstall"
"${CMake_BINARY_DIR}/Tests/SimpleInstall"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project TestSimpleInstall
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-two-config
--build-options
"-DCMAKE_INSTALL_PREFIX:PATH=${SimpleInstallInstallDir}"
"-DCTEST_TEST_CPACK:BOOL=${CTEST_TEST_CPACK}"
--test-command ${SimpleInstallInstallDir}/MyTest/bin/SimpleInstExe)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/SimpleInstall")
add_test(SimpleInstall-Stage2 ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/SimpleInstallS2"
"${CMake_BINARY_DIR}/Tests/SimpleInstallS2"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project TestSimpleInstall
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-two-config
--build-options
"-DCMAKE_INSTALL_PREFIX:PATH=${SimpleInstallInstallDir}"
"-DSTAGE2:BOOL=1"
--test-command ${SimpleInstallInstallDir}/MyTest/bin/SimpleInstExeS2)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/SimpleInstallS2")
# By default, run the CPackComponents test if the CTEST_TEST_CPACK
# option is ON:
#
set(CTEST_RUN_CPackComponents ${CTEST_TEST_CPACK})
set(CTEST_package_X11_TEST ${CTEST_TEST_CPACK})
set(CTEST_RUN_CPackComponentsForAll ${CTEST_TEST_CPACK})
if (CMAKE_SYSTEM_NAME MATCHES "Linux" AND NOT CMAKE_CURRENT_BINARY_DIR MATCHES ".* .*")
find_program(RPMBUILD NAMES rpmbuild)
endif()
# Do not try to build RPM
if (NOT RPMBUILD)
set(CPACK_BINARY_RPM OFF)
endif()
find_program(NSIS_MAKENSIS_EXECUTABLE NAMES makensis
PATHS [HKEY_LOCAL_MACHINE\\SOFTWARE\\NSIS]
DOC "makensis program location"
)
# But on Windows, only run the CPackComponents test if the NSIS
# installer builder is available:
#
if(WIN32)
if(NSIS_MAKENSIS_EXECUTABLE)
set(CTEST_RUN_CPackComponents ON)
else()
set(CTEST_RUN_CPackComponents OFF)
set(CTEST_package_X11_TEST OFF)
endif()
endif()
# On Windows run the CPackWiXGenerator test
# if the WiX Toolset seems to be available
if(WIN32)
file(TO_CMAKE_PATH "$ENV{WIX}" WIX_ROOT)
find_program(WIX_LIGHT_EXECUTABLE light
PATHS "${WIX_ROOT}/bin"
DOC "WiX Toolset light.exe location")
if(WIX_LIGHT_EXECUTABLE)
add_test(CPackWiXGenerator ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/CPackWiXGenerator"
"${CMake_BINARY_DIR}/Tests/CPackWiXGenerator"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project CPackWiXGenerator
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command ${CMAKE_CMAKE_COMMAND}
"-DCPackWiXGenerator_BINARY_DIR:PATH=${CMake_BINARY_DIR}/Tests/CPackWiXGenerator"
-P "${CMake_SOURCE_DIR}/Tests/CPackWiXGenerator/RunCPackVerifyResult.cmake")
endif()
endif()
if(CTEST_RUN_CPackComponents)
set(CPackComponents_EXTRA_OPTIONS)
if(APPLE)
set(CPackComponents_EXTRA_OPTIONS -DCPACK_BINARY_DRAGNDROP:BOOL=ON)
endif()
if(NSIS_MAKENSIS_EXECUTABLE)
set(CPackComponents_EXTRA_OPTIONS ${CPackComponents_EXTRA_OPTIONS}
-DCPACK_BINARY_NSIS:BOOL=ON)
endif()
add_test(CPackComponents ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/CPackComponents"
"${CMake_BINARY_DIR}/Tests/CPackComponents"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project CPackComponents
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-two-config
--build-target package
--build-options
-DCPACK_BINARY_DEB:BOOL=${CPACK_BINARY_DEB}
-DCPACK_BINARY_RPM:BOOL=${CPACK_BINARY_RPM}
${CPackComponents_EXTRA_OPTIONS}
--graphviz=CPackComponents.dot
--test-command ${CMAKE_CMAKE_COMMAND}
"-DCPackComponents_BINARY_DIR:PATH=${CMake_BINARY_DIR}/Tests/CPackComponents"
-P "${CMake_SOURCE_DIR}/Tests/CPackComponents/VerifyResult.cmake")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/CPackComponents")
endif()
if(CTEST_RUN_CPackComponentsForAll)
# Check whether if rpmbuild command is found
# before adding RPM tests
find_program(RPMBUILD_EXECUTABLE NAMES rpmbuild)
if(RPMBUILD_EXECUTABLE)
list(APPEND ACTIVE_CPACK_GENERATORS RPM)
endif()
# Check whether if dpkg command is found
# before adding DEB tests
find_program(DPKG_EXECUTABLE NAMES dpkg)
if(DPKG_EXECUTABLE)
list(APPEND ACTIVE_CPACK_GENERATORS DEB)
endif()
# ACTIVE_CPACK_GENERATORS variable
# now contains the list of 'active generators'
set(CPackComponentsForAll_EXTRA_OPTIONS)
# set up list of CPack generators
list(APPEND GENLST "ZIP")
if(APPLE)
list(APPEND GENLST "DragNDrop")
endif()
if (NOT CMAKE_CURRENT_BINARY_DIR MATCHES ".* .*")
list(FIND ACTIVE_CPACK_GENERATORS "RPM" RPM_ACTIVE)
if (NOT ${RPM_ACTIVE} EQUAL -1)
list(APPEND GENLST "RPM")
endif()
endif()
list(FIND ACTIVE_CPACK_GENERATORS "DEB" DEB_ACTIVE)
if (NOT ${DEB_ACTIVE} EQUAL -1)
list(APPEND GENLST "DEB")
endif()
# set up list of component packaging ways
list(APPEND CWAYLST "default")
list(APPEND CWAYLST "OnePackPerGroup")
list(APPEND CWAYLST "IgnoreGroup")
list(APPEND CWAYLST "AllInOne")
foreach(CPackGen ${GENLST})
set(CPackRun_CPackGen "-DCPackGen=${CPackGen}")
foreach(CPackComponentWay ${CWAYLST})
set(CPackRun_CPackComponentWay "-DCPackComponentWay=${CPackComponentWay}")
add_test(CPackComponentsForAll-${CPackGen}-${CPackComponentWay} ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/CPackComponentsForAll"
"${CMake_BINARY_DIR}/Tests/CPackComponentsForAll/build${CPackGen}-${CPackComponentWay}"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project CPackComponentsForAll
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-options
-DCPACK_BINARY_${CPackGen}:BOOL=ON
${CPackRun_CPackComponentWay}
${CPackComponentsForAll_EXTRA_OPTIONS}
--graphviz=CPackComponentsForAll.dot
--test-command ${CMAKE_CMAKE_COMMAND}
"-DCPackComponentsForAll_BINARY_DIR:PATH=${CMake_BINARY_DIR}/Tests/CPackComponentsForAll/build${CPackGen}-${CPackComponentWay}"
"${CPackRun_CPackGen}"
"${CPackRun_CPackComponentWay}"
-P "${CMake_SOURCE_DIR}/Tests/CPackComponentsForAll/RunCPackVerifyResult.cmake")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/CPackComponentsForAll/build${CPackGen}-${CPackComponentWay}")
endforeach()
endforeach()
endif()
# By default, turn this test off (because it takes a long time...)
#
if(NOT DEFINED CTEST_RUN_CPackTestAllGenerators)
set(CTEST_RUN_CPackTestAllGenerators OFF)
# ...but: if it appears to be a coverage dashboard, or long tests are
# on, then set it to the generic CTEST_TEST_CPACK setting.
#
if(CMAKE_CXX_FLAGS MATCHES "-ftest-coverage" OR
NOT "$ENV{COVFILE}" STREQUAL "" OR
CMAKE_RUN_LONG_TESTS)
set(CTEST_RUN_CPackTestAllGenerators ${CTEST_TEST_CPACK})
endif()
endif()
if(CTEST_RUN_CPackTestAllGenerators)
add_test(CPackTestAllGenerators ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/CPackTestAllGenerators"
"${CMake_BINARY_DIR}/Tests/CPackTestAllGenerators"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project CPackTestAllGenerators
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command
${CMAKE_CMAKE_COMMAND}
-D dir=${CMake_BINARY_DIR}/Tests/CPackTestAllGenerators
-P ${CMake_SOURCE_DIR}/Tests/CPackTestAllGenerators/RunCPack.cmake
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/CPackTestAllGenerators")
endif()
if(CTEST_package_X11_TEST)
set(X11_build_target_arg --build-target package)
else()
set(X11_build_target_arg)
endif()
add_test(X11 ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/X11"
"${CMake_BINARY_DIR}/Tests/X11"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project UseX11
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-two-config
${X11_build_target_arg}
--test-command UseX11)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/X11")
if(NOT DEFINED CTEST_RUN_CMakeTestAllGenerators)
set(CTEST_RUN_CMakeTestAllGenerators ON)
endif()
if(CTEST_RUN_CMakeTestAllGenerators)
add_test(CMakeTestAllGenerators ${CMAKE_CMAKE_COMMAND}
-D dir=${CMake_BINARY_DIR}/Tests/CMakeTestAllGenerators
-D CMake_SOURCE_DIR=${CMake_SOURCE_DIR}
-P ${CMake_SOURCE_DIR}/Tests/CMakeTestAllGenerators/RunCMake.cmake
)
list(APPEND TEST_BUILD_DIRS
"${CMake_BINARY_DIR}/Tests/CMakeTestAllGenerators")
endif()
if(NOT DEFINED CTEST_RUN_CMakeTestBadCommandLines)
set(CTEST_RUN_CMakeTestBadCommandLines ON)
endif()
if(CTEST_RUN_CMakeTestBadCommandLines)
add_test(CMakeTestBadCommandLines ${CMAKE_CMAKE_COMMAND}
-D dir=${CMake_BINARY_DIR}/Tests/CMakeTestBadCommandLines
-D gen=${CMAKE_TEST_GENERATOR}
-D CMake_SOURCE_DIR=${CMake_SOURCE_DIR}
-P ${CMake_SOURCE_DIR}/Tests/CMakeTestBadCommandLines/RunCMake.cmake
)
list(APPEND TEST_BUILD_DIRS
"${CMake_BINARY_DIR}/Tests/CMakeTestBadCommandLines")
endif()
if(NOT DEFINED CTEST_RUN_CMakeTestMultipleConfigures)
set(CTEST_RUN_CMakeTestMultipleConfigures ON)
endif()
if(CTEST_RUN_CMakeTestMultipleConfigures)
add_test(CMakeTestMultipleConfigures ${CMAKE_CMAKE_COMMAND}
-D dir=${CMake_BINARY_DIR}/Tests/CMakeTestMultipleConfigures
-D gen=${CMAKE_TEST_GENERATOR}
-D CMake_SOURCE_DIR=${CMake_SOURCE_DIR}
-P ${CMake_SOURCE_DIR}/Tests/CMakeTestMultipleConfigures/RunCMake.cmake
)
list(APPEND TEST_BUILD_DIRS
"${CMake_BINARY_DIR}/Tests/CMakeTestMultipleConfigures")
endif()
add_test(LoadedCommandOneConfig ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/LoadCommandOneConfig"
"${CMake_BINARY_DIR}/Tests/LoadCommandOneConfig"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project LoadCommand
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command LoadedCommand
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/LoadCommandOneConfig")
add_test(complex ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Complex"
"${CMake_BINARY_DIR}/Tests/Complex"
--build-two-config
--build-config-sample "${CMAKE_CTEST_COMMAND}"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project Complex
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Complex/bin"
--build-options
-DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE}
--test-command complex
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Complex")
add_test(complexOneConfig ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/ComplexOneConfig"
"${CMake_BINARY_DIR}/Tests/ComplexOneConfig"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project Complex
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/ComplexOneConfig/bin"
--build-options
-DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE}
--test-command complex)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/ComplexOneConfig")
# because of the registry write these tests depend on each other
set_tests_properties ( complex PROPERTIES DEPENDS complexOneConfig)
add_test(Example ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Example"
"${CMake_BINARY_DIR}/Example"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project HELLO
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Example/Demo"
--test-command helloDemo
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Example")
add_test(Environment ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Environment"
"${CMake_BINARY_DIR}/Tests/Environment"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project EnvironmentProj
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Environment"
--force-new-ctest-process
--test-command ${CMAKE_CTEST_COMMAND} -V
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Environment")
if(QT4_WORKS AND QT_QTGUI_FOUND)
add_test(QtAutomoc ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/QtAutomoc"
"${CMake_BINARY_DIR}/Tests/QtAutomoc"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project QtAutomoc
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/QtAutomoc"
--force-new-ctest-process
--build-options -DQT_QMAKE_EXECUTABLE:FILEPATH=${QT_QMAKE_EXECUTABLE}
--test-command ${CMAKE_CTEST_COMMAND} -V
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/QtAutomoc")
endif()
if(QT4_WORKS AND QT_QTGUI_FOUND)
add_test(Qt4Targets ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Qt4Targets"
"${CMake_BINARY_DIR}/Tests/Qt4Targets"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project Qt4Targets
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Qt4Targets"
--force-new-ctest-process
--build-options -DQT_QMAKE_EXECUTABLE:FILEPATH=${QT_QMAKE_EXECUTABLE}
--test-command ${CMAKE_CTEST_COMMAND} -V
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Qt4Targets")
endif()
add_test(ExternalProject ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/ExternalProject"
"${CMake_BINARY_DIR}/Tests/ExternalProject"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project ExternalProjectTest
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/ExternalProject"
--force-new-ctest-process
--test-command ${CMAKE_CTEST_COMMAND} -V
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/ExternalProject")
set_tests_properties(ExternalProject PROPERTIES
TIMEOUT ${CMAKE_LONG_TEST_TIMEOUT})
add_test(ExternalProjectUpdateSetup ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/ExternalProjectUpdate"
"${CMake_BINARY_DIR}/Tests/ExternalProjectUpdate"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project ExternalProjectUpdateTest
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/ExternalProjectUpdate"
--force-new-ctest-process
--test-command ${CMAKE_CTEST_COMMAND} -V
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/ExternalProjectUpdate")
set_tests_properties(ExternalProjectUpdateSetup PROPERTIES
TIMEOUT ${CMAKE_LONG_TEST_TIMEOUT})
add_test(NAME ExternalProjectUpdate
COMMAND ${CMAKE_CMAKE_COMMAND}
-DExternalProjectUpdate_SOURCE_DIR:PATH=${CMake_SOURCE_DIR}/Tests/ExternalProjectUpdate
-DExternalProjectUpdate_BINARY_DIR:PATH=${CMake_BINARY_DIR}/Tests/ExternalProjectUpdate
-DCMAKE_TEST_GENERATOR=${CMAKE_TEST_GENERATOR}
-DCMAKE_TEST_MAKEPROGRAM=${CMAKE_TEST_MAKEPROGRAM}
-DCMAKE_CTEST_COMMAND=${CMAKE_CTEST_COMMAND}
-P ${CMake_SOURCE_DIR}/Tests/ExternalProjectUpdate/ExternalProjectUpdateTest.cmake
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/ExternalProjectUpdate")
set_tests_properties(ExternalProjectUpdate PROPERTIES
TIMEOUT ${CMAKE_LONG_TEST_TIMEOUT}
WORKING_DIRECTORY ${CMake_SOURCE_DIR}/Tests/ExternalProjectUpdate
DEPENDS ExternalProjectUpdateSetup )
# do each of the tutorial steps
foreach(STP RANGE 1 7)
add_test(TutorialStep${STP} ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Tutorial/Step${STP}"
"${CMake_BINARY_DIR}/Tests/Tutorial/Step${STP}"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project Tutorial
--test-command Tutorial 25.0)
endforeach()
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Tutorial")
add_test(testing ${CMAKE_CTEST_COMMAND} -C \${CTEST_CONFIGURATION_TYPE}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Testing"
"${CMake_BINARY_DIR}/Tests/Testing"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project Testing
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command ${CMAKE_CTEST_COMMAND} -C \${CTEST_CONFIGURATION_TYPE}
)
set_tests_properties(testing PROPERTIES PASS_REGULAR_EXPRESSION "Passed")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Testing")
add_test(wrapping ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Wrapping"
"${CMake_BINARY_DIR}/Tests/Wrapping"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project Wrapping
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Wrapping/bin"
--test-command wrapping
)
add_test(qtwrapping ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Wrapping"
"${CMake_BINARY_DIR}/Tests/Wrapping"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project Wrapping
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Wrapping/bin"
--test-command qtwrapping
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Wrapping")
add_test(testdriver1 ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/TestDriver"
"${CMake_BINARY_DIR}/Tests/TestDriver"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Wrapping/bin"
--build-project TestDriverTest
--test-command TestDriverTest test1
)
add_test(testdriver2 ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/TestDriver"
"${CMake_BINARY_DIR}/Tests/TestDriver"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Wrapping/bin"
--build-project TestDriverTest
--test-command TestDriverTest test2
)
add_test(testdriver3 ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/TestDriver"
"${CMake_BINARY_DIR}/Tests/TestDriver"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Wrapping/bin"
--build-project TestDriverTest
--test-command TestDriverTest subdir/test3
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/TestDriver")
add_test(Dependency ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Dependency"
"${CMake_BINARY_DIR}/Tests/Dependency"
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Dependency/Exec"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project Dependency
--test-command exec
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Dependency")
if("${CMAKE_SYSTEM_NAME}" MATCHES syllable)
# RPATH isn't supported under Syllable, so the tests don't
# find their libraries. In order to fix that LIBRARY_OUTPUT_DIR
# in the tests would have to be adjusted to ${EXECUTABLE_OUTPUT_DIR}/lib .
# For now we just require on Syllable that the user adjusts the DLL_PATH
# environment variable, so except the two tests below all other tests will succeed.
set(_DLL_PATH "$ENV{DLL_PATH}")
if(NOT "${_DLL_PATH}" MATCHES "^(.*:)?\\@bindir\\@/\\.(:.*)?$")
message(FATAL_ERROR "In order to successfully run the CMake test suite on Syllable you need to add \"\\@bindir\\@/.\" to the DLL_PATH environment variable")
endif()
if(NOT "${_DLL_PATH}" MATCHES "^(.*:)?\\@bindir\\@/\\.\\./lib(:.*)?$")
message(FATAL_ERROR "In order to successfully run the CMake test suite on Syllable you need to add \"\\@bindir\\@/../lib\" to the DLL_PATH environment variable")
endif()
else()
add_test(JumpWithLibOut ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Jump"
"${CMake_BINARY_DIR}/Tests/Jump/WithLibOut"
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Jump/WithLibOut/Executable"
--build-project Jump
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-options
-DLIBRARY_OUTPUT_PATH:PATH=${CMake_BINARY_DIR}/Tests/Jump/WithLibOut/Lib
--test-command jumpExecutable
)
add_test(JumpNoLibOut ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Jump"
"${CMake_BINARY_DIR}/Tests/Jump/NoLibOut"
--build-exe-dir "${CMake_BINARY_DIR}/Tests/Jump/NoLibOut/Executable"
--build-run-dir "${CMake_BINARY_DIR}/Tests/Jump/NoLibOut/Executable"
--build-project Jump
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command jumpExecutable
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Jump")
add_test(Plugin ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Plugin"
"${CMake_BINARY_DIR}/Tests/Plugin"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project Plugin
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-two-config
--test-command bin/example)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Plugin")
if(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG)
ADD_TEST_MACRO(RuntimePath RuntimePath)
endif()
endif()
add_test(linkorder1 ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/LinkLineOrder"
"${CMake_BINARY_DIR}/Tests/LinkLineOrder"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project LinkLineOrder
--test-command Exec1
)
add_test(linkorder2 ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/LinkLineOrder"
"${CMake_BINARY_DIR}/Tests/LinkLineOrder"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project LinkLineOrder
--test-command Exec2
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/LinkLineOrder")
set_tests_properties ( qtwrapping PROPERTIES DEPENDS wrapping)
set_tests_properties ( testdriver1 PROPERTIES DEPENDS qtwrapping)
set_tests_properties ( testdriver2 PROPERTIES DEPENDS testdriver1)
set_tests_properties ( testdriver3 PROPERTIES DEPENDS testdriver2)
set_tests_properties ( linkorder2 PROPERTIES DEPENDS linkorder1)
set_tests_properties ( SimpleInstall-Stage2 PROPERTIES DEPENDS SimpleInstall)
# Test static linking on toolchains known to support it.
if("${CMAKE_C_COMPILER_ID}" MATCHES "^(GNU)$"
AND NOT APPLE AND NOT WIN32 AND NOT CYGWIN
AND EXISTS "/usr/lib/libm.a")
add_test(LinkStatic ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/LinkStatic"
"${CMake_BINARY_DIR}/Tests/LinkStatic"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project LinkStatic
--build-options -DMATH_LIBRARY:FILEPATH=/usr/lib/libm.a
--test-command LinkStatic
)
endif()
if(NOT CMAKE_TEST_DIFFERENT_GENERATOR)
add_test(kwsys ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Source/kwsys"
"${CMake_BINARY_DIR}/Tests/kwsys"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project kwsys
--test-command kwsysTestsCxx testIOS
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/kwsys")
endif()
set(MAKE_IS_GNU )
if(${CMAKE_TEST_MAKEPROGRAM} MATCHES make)
exec_program(
${CMAKE_TEST_MAKEPROGRAM} ARGS no_such_target --version
RETURN_VALUE res OUTPUT_VARIABLE out
)
if("${res}" EQUAL 0)
if("${out}" MATCHES "GNU")
set(MAKE_IS_GNU 1)
endif()
endif()
endif()
# only add this test on platforms that support it
# some old versions of make simply cannot handle spaces in paths
if (MAKE_IS_GNU OR
"${CMAKE_TEST_MAKEPROGRAM}" MATCHES "nmake|gmake|wmake" OR
"${CMAKE_TEST_GENERATOR}" MATCHES "Visual Studio|XCode|Borland")
add_test(SubDirSpaces ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/SubDirSpaces"
"${CMake_BINARY_DIR}/Tests/SubDirSpaces"
--build-exe-dir
"${CMake_BINARY_DIR}/Tests/SubDirSpaces/Executable Sources"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project SUBDIR
--test-command test
"${CMake_BINARY_DIR}/Tests/SubDirSpaces/ShouldBeHere"
"${CMake_BINARY_DIR}/Tests/SubDirSpaces/testfromsubdir.obj"
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/SubDirSpaces")
endif ()
if (WIN32)
add_test(SubDir ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/SubDir"
"${CMake_BINARY_DIR}/Tests/SubDir"
--build-exe-dir "${CMake_BINARY_DIR}/Tests/SubDir/Executable"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project SUBDIR
--test-command test
"${CMake_BINARY_DIR}/Tests/SubDir/ShouldBeHere"
"${CMake_BINARY_DIR}/Tests/SubDir/testfromsubdir.obj"
)
else ()
add_test(SubDir ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/SubDir"
"${CMake_BINARY_DIR}/Tests/SubDir"
--build-exe-dir "${CMake_BINARY_DIR}/Tests/SubDir/Executable"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project SUBDIR
--test-command test
"${CMake_BINARY_DIR}/Tests/SubDir/ShouldBeHere"
"${CMake_BINARY_DIR}/Tests/SubDir/testfromsubdir.o"
)
endif ()
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/SubDir")
if(CMAKE_TEST_MSVC)
ADD_TEST_MACRO(ForceInclude foo)
ADD_TEST_MACRO(PDBDirectoryAndName myexe)
ADD_TEST_MACRO(PrecompiledHeader foo)
endif()
if(CMAKE_TEST_MSVC OR
"${CMAKE_TEST_GENERATOR}" MATCHES "(MSYS|MinGW) Makefiles")
ADD_TEST_MACRO(ModuleDefinition example_exe)
endif()
ADD_TEST_MACRO(CheckCompilerRelatedVariables CheckCompilerRelatedVariables)
if("${CMAKE_TEST_GENERATOR}" MATCHES "Makefile")
add_test(MakeClean ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/MakeClean"
"${CMake_BINARY_DIR}/Tests/MakeClean"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project MakeClean
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/MakeClean"
--test-command check_clean
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/MakeClean")
endif()
if(NOT DEFINED CTEST_RUN_MFC)
set(CTEST_RUN_MFC OFF)
if(MSVC)
set(CTEST_RUN_MFC ON)
# Look for evidence that this is a VCExpress build. If so, avoid
# the MFC test by default.
string(TOLOWER "${CMAKE_TEST_MAKEPROGRAM}" mkprog)
if(mkprog MATCHES "vcexpress")
message(STATUS
"CMAKE_TEST_MAKEPROGRAM indicates vcexpress, avoiding MFC test")
set(CTEST_RUN_MFC OFF)
endif()
# Since MSBuild might also be the "makeprogram" for a VCExpress
# build tree, use one more heuristic, too. The string representing
# the .vcproj file type contains "VCExpress" on machines where an
# express edition of VS was installed last:
if(CTEST_RUN_MFC)
execute_process(COMMAND cmd /c assoc .vcproj
OUTPUT_STRIP_TRAILING_WHITESPACE
OUTPUT_VARIABLE ov)
if(ov MATCHES "VCExpress")
message(STATUS
".vcproj file association indicates VCExpress, avoiding MFC test")
set(CTEST_RUN_MFC OFF)
endif()
endif()
# For the Watcom WMake generator, avoid the MFC test by default.
if(CTEST_RUN_MFC)
if("${CMAKE_TEST_GENERATOR}" MATCHES "WMake")
message(STATUS
"using the Watcom WMake generator, avoiding MFC test")
set(CTEST_RUN_MFC OFF)
endif()
endif()
# Last resort, after quick checks are done. Do a try_compile, and avoid
# the MFC test if the simplest possible MFC app cannot be compiled.
if(CTEST_RUN_MFC AND NOT DEFINED HAVE_MFC)
configure_file(
${CMAKE_CURRENT_SOURCE_DIR}/MFC/try_compile/CMakeLists.txt
${CMAKE_CURRENT_BINARY_DIR}/MFC/try_compile/CMakeLists.txt
COPYONLY
)
configure_file(
${CMAKE_CURRENT_SOURCE_DIR}/MFC/mfc1/stdafx.cpp
${CMAKE_CURRENT_BINARY_DIR}/MFC/try_compile/stdafx.cpp
COPYONLY
)
configure_file(
${CMAKE_CURRENT_SOURCE_DIR}/MFC/mfc1/stdafx.h
${CMAKE_CURRENT_BINARY_DIR}/MFC/try_compile/stdafx.h
COPYONLY
)
message(STATUS "Looking for MFC")
try_compile(HAVE_MFC
${CMAKE_CURRENT_BINARY_DIR}/MFC/try_compile/build
${CMAKE_CURRENT_BINARY_DIR}/MFC/try_compile
try_compile_mfc
OUTPUT_VARIABLE HAVE_MFC_OUTPUT)
if(HAVE_MFC)
message(STATUS "Looking for MFC - found")
set(HAVE_MFC 1 CACHE INTERNAL "Have MFC")
file(APPEND
${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log
"Determining if MFC exists passed with the following output:\n"
"${HAVE_MFC_OUTPUT}\n\n")
else()
message(STATUS "Looking for MFC - not found")
set(HAVE_MFC "" CACHE INTERNAL "Have MFC")
file(APPEND
${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
"Determining if MFC exists failed with the following output:\n"
"${HAVE_MFC_OUTPUT}\n\n")
endif()
endif()
if(CTEST_RUN_MFC AND NOT HAVE_MFC)
message(STATUS
"cannot compile simplest ever MFC app, avoiding MFC test")
set(CTEST_RUN_MFC OFF)
endif()
endif()
endif()
if(CTEST_RUN_MFC)
add_test(MFC ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/MFC"
"${CMake_BINARY_DIR}/Tests/MFC"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project mfc_driver
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command ${CMAKE_CTEST_COMMAND}
-C \${CTEST_CONFIGURATION_TYPE} -VV)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/MFC")
endif()
if(${CMAKE_TEST_GENERATOR} MATCHES "Visual Studio")
if(NOT MSVC60)
ADD_TEST_MACRO(SBCS SBCS)
endif()
add_test(VSExternalInclude ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/VSExternalInclude"
"${CMake_BINARY_DIR}/Tests/VSExternalInclude"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project VSExternalInclude
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command VSExternalInclude)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/VSExternalInclude")
add_test(VSMidl ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/VSMidl"
"${CMake_BINARY_DIR}/Tests/VSMidl"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project VSMidl
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command VSMidl)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/VSMidl")
if(NOT MSVC60 AND NOT CMAKE_TEST_MAKEPROGRAM MATCHES "[mM][sS][bB][uU][iI][lL][dD]\\.[eE][xX][eE]")
# The test (and tested property) works with .sln files, so it's skipped when:
# * Using VS6, which doesn't use .sln files
# * cmake --build is set up to use MSBuild, since the MSBuild invocation does not use the .sln file
set(_last_test "")
foreach(config ${CMAKE_CONFIGURATION_TYPES})
add_test(NAME VSExcludeFromDefaultBuild-${config} COMMAND ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/VSExcludeFromDefaultBuild"
"${CMake_BINARY_DIR}/Tests/VSExcludeFromDefaultBuild"
--build-config ${config}
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project VSExcludeFromDefaultBuild
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command ${CMAKE_COMMAND}
-D "activeConfig=${config}"
-D "allConfigs=${CMAKE_CONFIGURATION_TYPES}"
-D "dir=${CMake_BINARY_DIR}/Tests/VSExcludeFromDefaultBuild"
-P "${CMake_SOURCE_DIR}/Tests/VSExcludeFromDefaultBuild/ResultTest.cmake")
if(_last_test)
set_property(TEST VSExcludeFromDefaultBuild-${config} PROPERTY DEPENDS ${_last_test})
endif()
set(_last_test "VSExcludeFromDefaultBuild-${config}")
endforeach()
unset(_last_test)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/VSExcludeFromDefaultBuild")
endif()
endif()
if (APPLE)
if (CMAKE_COMPILER_IS_GNUCXX OR "${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
set(BundleTestInstallDir
"${CMake_BINARY_DIR}/Tests/BundleTest/InstallDirectory")
add_test(BundleTest ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/BundleTest"
"${CMake_BINARY_DIR}/Tests/BundleTest"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project BundleTest
--build-target install
# --build-target package
--build-options "-DCMAKE_INSTALL_PREFIX:PATH=${BundleTestInstallDir}"
"-DCMake_SOURCE_DIR:PATH=${CMake_SOURCE_DIR}"
--test-command
${BundleTestInstallDir}/Applications/SecondBundleExe.app/Contents/MacOS/SecondBundleExe)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/BundleTest")
add_test(CFBundleTest ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/CFBundleTest"
"${CMake_BINARY_DIR}/Tests/CFBundleTest"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project CFBundleTest
--test-command
${CMAKE_CMAKE_COMMAND} -DCTEST_CONFIGURATION_TYPE=\${CTEST_CONFIGURATION_TYPE}
-Ddir=${CMake_BINARY_DIR}/Tests/CFBundleTest
-Dgen=${CMAKE_TEST_GENERATOR}
-P ${CMake_SOURCE_DIR}/Tests/CFBundleTest/VerifyResult.cmake)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/CFBundleTest")
ADD_TEST_MACRO(ObjC++ ObjC++)
endif ()
endif ()
if(APPLE AND CTEST_TEST_CPACK)
add_test(BundleGeneratorTest ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/BundleGeneratorTest"
"${CMake_BINARY_DIR}/Tests/BundleGeneratorTest"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-project BundleGeneratorTest
--build-target package
--build-options "-DCMAKE_INSTALL_PREFIX:PATH=${CMake_BINARY_DIR}/Tests/BundleGeneratorTest/InstallDirectory"
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/BundleGeneratorTest")
endif()
add_test(WarnUnusedUnusedViaSet ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/VariableUnusedViaSet"
"${CMake_BINARY_DIR}/Tests/WarnUnusedUnusedViaSet"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-noclean
--build-project WarnUnusedUnusedViaSet
--build-options "--warn-unused-vars")
set_tests_properties(WarnUnusedUnusedViaSet PROPERTIES
PASS_REGULAR_EXPRESSION "unused variable \\(changing definition\\) 'UNUSED_VARIABLE'")
set_tests_properties(WarnUnusedUnusedViaSet PROPERTIES
FAIL_REGULAR_EXPRESSION "unused variable \\(unsetting\\) 'UNUSED_VARIABLE'")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/WarnUnusedUnusedViaSet")
add_test(WarnUnusedUnusedViaUnset ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/VariableUnusedViaUnset"
"${CMake_BINARY_DIR}/Tests/WarnUnusedUnusedViaUnset"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-noclean
--build-project WarnUnusedUnusedViaUnset
--build-options "--warn-unused-vars")
set_tests_properties(WarnUnusedUnusedViaUnset PROPERTIES
PASS_REGULAR_EXPRESSION "CMake Warning .*VariableUnusedViaUnset.CMakeLists.txt:7 \\(set\\):")
set_tests_properties(WarnUnusedUnusedViaUnset PROPERTIES
FAIL_REGULAR_EXPRESSION "CMake Warning .*VariableUnusedViaUnset.CMakeLists.txt:5 \\(set\\):")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/WarnUnusedUnusedViaUnset")
add_test(WarnUnusedCliUnused ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/VariableUsage"
"${CMake_BINARY_DIR}/Tests/WarnUnusedCliUnused"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-noclean
--build-project WarnUnusedCliUnused
--build-options "-DUNUSED_CLI_VARIABLE=Unused")
set_tests_properties(WarnUnusedCliUnused PROPERTIES
PASS_REGULAR_EXPRESSION "CMake Warning:.*Manually-specified variables were not used by the project:.* UNUSED_CLI_VARIABLE")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/WarnUnusedCliUnused")
add_test(WarnUnusedCliUsed ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/VariableUsage"
"${CMake_BINARY_DIR}/Tests/WarnUnusedCliUsed"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-noclean
--build-project WarnUnusedCliUsed
--build-options "-DUSED_VARIABLE=Usage proven")
set_tests_properties(WarnUnusedCliUsed PROPERTIES
PASS_REGULAR_EXPRESSION "Usage proven")
set_tests_properties(WarnUnusedCliUsed PROPERTIES
FAIL_REGULAR_EXPRESSION "CMake Warning: The variable, 'USED_VARIABLE'")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/WarnUnusedCliUsed")
add_test(WarnUninitialized ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/VariableUsage"
"${CMake_BINARY_DIR}/Tests/WarnUninitialized"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-noclean
--build-project WarnUninitialized
--build-options "--warn-uninitialized")
set_tests_properties(WarnUninitialized PROPERTIES
PASS_REGULAR_EXPRESSION "uninitialized variable 'USED_VARIABLE'")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/WarnUninitialized")
add_test(TestsWorkingDirectory ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/TestsWorkingDirectory"
"${CMake_BINARY_DIR}/Tests/TestsWorkingDirectory"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project TestsWorkingDirectoryProj
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-exe-dir "${CMake_BINARY_DIR}/Tests/TestsWorkingDirectory"
--force-new-ctest-process
--test-command ${CMAKE_CTEST_COMMAND} -V -C \${CTEST_CONFIGURATION_TYPE}
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/TestsWorkingDirectory")
# Make sure CTest can handle a test with no newline in output.
add_test(CTest.NoNewline
${CMAKE_CMAKE_COMMAND} -E echo_append "This line has no newline!")
# A simple test for ctest in script mode
configure_file("${CMake_SOURCE_DIR}/Tests/CTestScriptMode/CTestTestScriptMode.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestScriptMode/CTestTestScriptMode.cmake" @ONLY)
# add_test(CTest.ScriptMode ${CMAKE_CTEST_COMMAND}
# -S "${CMake_BINARY_DIR}/Tests/CTestScriptMode/CTestTestScriptMode.cmake"
# )
set(CTEST_TEST_UPDATE 1)
if(CTEST_TEST_UPDATE)
# Test CTest Update with Subversion
find_package(Subversion QUIET)
if(Subversion_FOUND)
get_filename_component(_Subversion_BIN_DIR
${Subversion_SVN_EXECUTABLE} PATH)
find_program(Subversion_SVNADMIN_EXECUTABLE svnadmin
HINTS ${_Subversion_BIN_DIR}
)
mark_as_advanced(Subversion_SVNADMIN_EXECUTABLE)
if(NOT Subversion_SVNADMIN_EXECUTABLE)
set(Subversion_FOUND FALSE)
endif()
endif()
if(Subversion_FOUND)
set(CTestUpdateSVN_DIR "CTest UpdateSVN")
configure_file("${CMake_SOURCE_DIR}/Tests/CTestUpdateSVN.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestUpdateSVN.cmake" @ONLY)
add_test(CTest.UpdateSVN ${CMAKE_CMAKE_COMMAND}
-P "${CMake_BINARY_DIR}/Tests/CTestUpdateSVN.cmake"
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/${CTestUpdateSVN_DIR}")
endif()
# Test CTest Update with CVS
if(EXISTS ${CMAKE_ROOT}/Modules/FindCVS.cmake)
find_package(CVS QUIET)
else()
find_program(CVS_EXECUTABLE NAMES cvs)
set(CVS_FOUND ${CVS_EXECUTABLE})
endif()
set(CTEST_TEST_UPDATE_CVS ${CVS_FOUND})
if(CTEST_TEST_UPDATE_CVS AND NOT UNIX)
if("${CVS_EXECUTABLE}" MATCHES "cygwin")
message(STATUS "No CTest.UpdateCVS test with cygwin cvs.exe outside cygwin!")
set(CTEST_TEST_UPDATE_CVS 0)
endif()
endif()
if(CTEST_TEST_UPDATE_CVS)
set(CTestUpdateCVS_DIR "CTest UpdateCVS")
configure_file("${CMake_SOURCE_DIR}/Tests/CTestUpdateCVS.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestUpdateCVS.cmake" @ONLY)
add_test(CTest.UpdateCVS ${CMAKE_CMAKE_COMMAND}
-P "${CMake_BINARY_DIR}/Tests/CTestUpdateCVS.cmake"
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/${CTestUpdateCVS_DIR}")
endif()
# Test CTest Update with BZR
find_program(BZR_EXECUTABLE NAMES bzr)
mark_as_advanced(BZR_EXECUTABLE)
set(CTEST_TEST_UPDATE_BZR 0)
if(BZR_EXECUTABLE)
if(NOT "${BZR_EXECUTABLE}" MATCHES "cygwin" OR UNIX)
set(CTEST_TEST_UPDATE_BZR 1)
endif()
endif()
if(CTEST_TEST_UPDATE_BZR)
# Check if xmloutput plugin is there
execute_process(COMMAND ${BZR_EXECUTABLE} xmlplugins RESULT_VARIABLE xmlplugres
OUTPUT_QUIET ERROR_QUIET)
if( NOT ${xmlplugres} )
set(CTestUpdateBZR_DIR "CTest UpdateBZR")
configure_file("${CMake_SOURCE_DIR}/Tests/CTestUpdateBZR.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestUpdateBZR.cmake" @ONLY)
add_test(CTest.UpdateBZR ${CMAKE_CMAKE_COMMAND}
-P "${CMake_BINARY_DIR}/Tests/CTestUpdateBZR.cmake"
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/${CTestUpdateBZR_DIR}")
set(CTestUpdateBZR_DIR "CTest UpdateBZR_CLocale")
configure_file("${CMake_SOURCE_DIR}/Tests/CTestUpdateBZR.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestUpdateBZR_CLocale.cmake" @ONLY)
add_test(CTest.UpdateBZR.CLocale ${CMAKE_CMAKE_COMMAND}
-P "${CMake_BINARY_DIR}/Tests/CTestUpdateBZR_CLocale.cmake"
)
set_tests_properties(CTest.UpdateBZR.CLocale PROPERTIES ENVIRONMENT LC_ALL=C)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/${CTestUpdateBZR_DIR}")
endif()
endif()
# Test CTest Update with GIT
find_program(GIT_EXECUTABLE NAMES git)
mark_as_advanced(GIT_EXECUTABLE)
set(CTEST_TEST_UPDATE_GIT 0)
if(GIT_EXECUTABLE)
if(NOT "${GIT_EXECUTABLE}" MATCHES "cygwin" OR UNIX)
set(CTEST_TEST_UPDATE_GIT 1)
endif()
endif()
if(CTEST_TEST_UPDATE_GIT)
set(CTestUpdateGIT_DIR "CTest UpdateGIT")
configure_file("${CMake_SOURCE_DIR}/Tests/CTestUpdateGIT.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestUpdateGIT.cmake" @ONLY)
add_test(CTest.UpdateGIT ${CMAKE_CMAKE_COMMAND}
-P "${CMake_BINARY_DIR}/Tests/CTestUpdateGIT.cmake"
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/${CTestUpdateGIT_DIR}")
endif()
# Test CTest Update with HG
find_program(HG_EXECUTABLE NAMES hg)
mark_as_advanced(HG_EXECUTABLE)
set(CTEST_TEST_UPDATE_HG 0)
if(HG_EXECUTABLE)
if(NOT "${HG_EXECUTABLE}" MATCHES "cygwin" OR UNIX)
set(CTEST_TEST_UPDATE_HG 1)
endif()
endif()
if(CTEST_TEST_UPDATE_HG)
set(CTestUpdateHG_DIR "CTest UpdateHG")
configure_file("${CMake_SOURCE_DIR}/Tests/CTestUpdateHG.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestUpdateHG.cmake" @ONLY)
add_test(CTest.UpdateHG ${CMAKE_CMAKE_COMMAND}
-P "${CMake_BINARY_DIR}/Tests/CTestUpdateHG.cmake"
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/${CTestUpdateHG_DIR}")
endif()
endif()
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestFailure/testNoBuild.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestFailure/testNoBuild.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestNoBuild ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestFailure/testNoBuild.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestFailure/testOut1.log"
)
set_tests_properties(CTestTestNoBuild PROPERTIES
FAIL_REGULAR_EXPRESSION "Error" WILL_FAIL true)
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestFailure/testNoExe.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestFailure/testNoExe.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestNoExe ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestFailure/testNoExe.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestFailure/testOut2.log"
)
set_tests_properties(CTestTestNoExe PROPERTIES DEPENDS CTestTestNoBuild
PASS_REGULAR_EXPRESSION "Could not find executable"
FAIL_REGULAR_EXPRESSION "SegFault")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestUpload/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestUpload/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestUpload ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestUpload/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestUpload/testOut.log"
)
set_tests_properties(CTestTestUpload PROPERTIES
PASS_REGULAR_EXPRESSION "Upload\\.xml")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestConfigFileInBuildDir/test1.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestConfigFileInBuildDir1/test1.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestConfigFileInBuildDir1 ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestConfigFileInBuildDir1/test1.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestConfigFileInBuildDir1/testOut1.log"
)
REGEX_ESCAPE_STRING(CTEST_TEST_ESCAPED_SOURCE_DIR "${CMake_SOURCE_DIR}")
set_tests_properties(CTestTestConfigFileInBuildDir1 PROPERTIES DEPENDS CTestTestNoBuild
PASS_REGULAR_EXPRESSION
"Reading ctest configuration file: ${CTEST_TEST_ESCAPED_SOURCE_DIR}.Tests.CTestTestConfigFileInBuildDir.CTestConfig.cmake")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestConfigFileInBuildDir/test2.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestConfigFileInBuildDir2/test2.cmake"
@ONLY ESCAPE_QUOTES)
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestConfigFileInBuildDir/CTestConfig.cmake"
"${CMake_BINARY_DIR}/Tests/CTestTestConfigFileInBuildDir2/CTestConfig.cmake"
@ONLY ESCAPE_QUOTES COPYONLY)
add_test(CTestTestConfigFileInBuildDir2 ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestConfigFileInBuildDir2/test2.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestConfigFileInBuildDir2/testOut2.log"
)
REGEX_ESCAPE_STRING(CTEST_TEST_ESCAPED_BINARY_DIR "${CMake_BINARY_DIR}")
set_tests_properties(CTestTestConfigFileInBuildDir2 PROPERTIES DEPENDS CTestTestNoBuild
REQUIRED_FILES ${CMake_BINARY_DIR}/Tests/CTestTestConfigFileInBuildDir2/CTestConfig.cmake
PASS_REGULAR_EXPRESSION
"Reading ctest configuration file: ${CTEST_TEST_ESCAPED_BINARY_DIR}.Tests.CTestTestConfigFileInBuildDir2.CTestConfig.cmake")
# test coverage for mumps
# create a MumpsCoverage dir in the binary tree under Testing to
# avoid the .NoDartCoverage files in the cmake testing tree
configure_file(
"${CMake_SOURCE_DIR}/Tests/MumpsCoverage/DartConfiguration.tcl.in"
"${CMake_BINARY_DIR}/Testing/MumpsCoverage/DartConfiguration.tcl")
configure_file(
"${CMake_SOURCE_DIR}/Tests/MumpsCoverage/gtm_coverage.mcov.in"
"${CMake_BINARY_DIR}/Testing/MumpsCoverage/gtm_coverage.mcov")
file(COPY "${CMake_SOURCE_DIR}/Tests/MumpsCoverage/VistA-FOIA"
DESTINATION "${CMake_BINARY_DIR}/Testing/MumpsCoverage")
add_test(NAME CTestGTMCoverage
COMMAND cmake -E chdir
${CMake_BINARY_DIR}/Testing/MumpsCoverage
$<TARGET_FILE:ctest> -T Coverage --debug)
set_tests_properties(CTestGTMCoverage PROPERTIES
PASS_REGULAR_EXPRESSION
"Process file.*XINDEX.m.*Total LOC:.*127.*Percentage Coverage: 85.83.*"
ENVIRONMENT COVFILE=)
configure_file(
"${CMake_SOURCE_DIR}/Tests/MumpsCoverage/DartConfiguration.cache.tcl.in"
"${CMake_BINARY_DIR}/Testing/MumpsCacheCoverage/DartConfiguration.tcl")
configure_file(
"${CMake_SOURCE_DIR}/Tests/MumpsCoverage/cache_coverage.cmcov.in"
"${CMake_BINARY_DIR}/Testing/MumpsCacheCoverage/cache_coverage.cmcov")
file(COPY "${CMake_SOURCE_DIR}/Tests/MumpsCoverage/VistA-FOIA"
DESTINATION "${CMake_BINARY_DIR}/Testing/MumpsCacheCoverage")
add_test(NAME CTestCacheCoverage
COMMAND cmake -E chdir
${CMake_BINARY_DIR}/Testing/MumpsCacheCoverage
$<TARGET_FILE:ctest> -T Coverage --debug)
set_tests_properties(CTestCacheCoverage PROPERTIES
PASS_REGULAR_EXPRESSION
"Process file.*XINDEX.m.*Total LOC:.*125.*Percentage Coverage: 85.60.*"
ENVIRONMENT COVFILE=)
# Use macro, not function so that build can still be driven by CMake 2.4.
# After 2.6 is required, this could be a function without the extra 'set'
# calls.
#
macro(add_config_tests cfg)
set(cfg "${cfg}")
set(base "${CMake_BINARY_DIR}/Tests/CTestConfig")
# Test -S script with a -C config arg to ctest:
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestConfig/script.cmake.in"
"${base}/${cfg}-script.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestConfig.Script.${cfg} ${CMAKE_CTEST_COMMAND}
-C ${cfg}
-S "${base}/${cfg}-script.cmake" -VV
--output-log "${base}/${cfg}-script.log"
)
# Test -D dashboard with a -C config arg to ctest.
# (Actual commands inside a cmake -P script because we need to be able to set
# the working directory reliably...)
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestConfig/dashboard.cmake.in"
"${base}/${cfg}-dashboard.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestConfig.Dashboard.${cfg} ${CMAKE_CMAKE_COMMAND}
-P "${base}/${cfg}-dashboard.cmake" -VV
)
endmacro()
add_config_tests(Debug)
add_config_tests(MinSizeRel)
add_config_tests(Release)
add_config_tests(RelWithDebInfo)
# Test -S script with some -D variable definition args to ctest:
add_test(CTestConfig.ScriptWithArgs ${CMAKE_CTEST_COMMAND}
-C "Release"
-D arg1=this
-D arg2=that
-D "arg3=the other"
"-Darg4=this is the fourth"
-Darg5=the_fifth
-Darg6:STRING=value-with-type
-S "${CMake_SOURCE_DIR}/Tests/CTestConfig/ScriptWithArgs.cmake" -VV
--output-log "${CMake_BINARY_DIR}/Tests/CTestConfig/ScriptWithArgs.log"
)
ADD_TEST_MACRO(CMakeCommands.target_link_libraries target_link_libraries)
ADD_TEST_MACRO(CMakeCommands.target_include_directories target_include_directories)
ADD_TEST_MACRO(CMakeCommands.target_compile_definitions target_compile_definitions)
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestCrash/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestCrash/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestCrash ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestCrash/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestCrash/testOutput.log"
)
# with watcom the SEGFAULT is not found, it just fails
if(CMAKE_TEST_GENERATOR MATCHES "Watcom WMake")
set_tests_properties(CTestTestCrash PROPERTIES
PASS_REGULAR_EXPRESSION "Failed")
else()
set_tests_properties(CTestTestCrash PROPERTIES
PASS_REGULAR_EXPRESSION "(Illegal|SegFault)")
endif()
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestBadExe/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestBadExe/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestBadExe ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestBadExe/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestBadExe/testOutput.log"
)
set(CTestTestBadExe_REGEX "BAD_COMMAND")
# some cygwin can not be made to produce a BAD_COMMAND error
# the best we can get from it is a failed test
if(CYGWIN)
set(CTestTestBadExe_REGEX "(\\*\\*\\*Failed)|BAD_COMMAND")
endif()
set_tests_properties(CTestTestBadExe PROPERTIES
PASS_REGULAR_EXPRESSION "${CTestTestBadExe_REGEX}")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestParallel/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestParallel/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestParallel ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestParallel/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestParallel/testOutput.log"
)
add_test_macro(CTestLimitDashJ ${CMAKE_CTEST_COMMAND} -j 4
--output-on-failure -C "\${CTestTest_CONFIG}")
add_test(CTestTestPrintLabels ${CMAKE_CTEST_COMMAND} --print-labels)
set_tests_properties(CTestTestPrintLabels PROPERTIES LABELS "Label1;Label2")
set_tests_properties(CTestTestPrintLabels PROPERTIES PASS_REGULAR_EXPRESSION
"All Labels:.* Label1.* Label2")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestResourceLock/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestResourceLock/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestResourceLock ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestResourceLock/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestResourceLock/output.log"
)
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestScheduler/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestScheduler/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestScheduler ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestScheduler/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestScheduler/testOutput.log"
)
set_tests_properties(CTestTestScheduler PROPERTIES
PASS_REGULAR_EXPRESSION "Start 1.*Start 2.*Start 3.*Start 4.*Start 4.*Start 3.*Start 2.*Start 1"
RESOURCE_LOCK "CostData")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestCostSerial/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestCostSerial/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestCostSerial ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestCostSerial/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestCostSerial/testOutput.log"
)
set_tests_properties(CTestTestCostSerial PROPERTIES
PASS_REGULAR_EXPRESSION "Start 2.*Start 3.*Start 1.*Start 2.*Start 3.*Start 1"
RESOURCE_LOCK "CostData")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestStopTime/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestStopTime/test.cmake"
@ONLY ESCAPE_QUOTES)
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestStopTime/GetDate.cmake"
"${CMake_BINARY_DIR}/Tests/CTestTestStopTime/GetDate.cmake"
COPYONLY)
add_test(CTestTestStopTime ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestStopTime/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestStopTime/testOutput.log"
)
set_tests_properties(CTestTestStopTime PROPERTIES
PASS_REGULAR_EXPRESSION "The stop time has been passed")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestSubdir/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestSubdir/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestSubdir ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestSubdir/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestSubdir/testOutput.log"
)
#make sure all 3 subdirs were added
set_tests_properties(CTestTestSubdir PROPERTIES
PASS_REGULAR_EXPRESSION "0 tests failed out of 3")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestTimeout/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestTimeout/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestTimeout ${CMAKE_CTEST_COMMAND}
-C "\${CTestTest_CONFIG}"
-S "${CMake_BINARY_DIR}/Tests/CTestTestTimeout/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestTimeout/testOutput.log"
)
set_tests_properties(CTestTestTimeout PROPERTIES
PASS_REGULAR_EXPRESSION "TestTimeout *\\.+ *\\*\\*\\*Timeout.*CheckChild *\\.+ *Passed")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestZeroTimeout/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestZeroTimeout/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestZeroTimeout ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestZeroTimeout/test.cmake" -V
--output-log
"${CMake_BINARY_DIR}/Tests/CTestTestZeroTimeout/testOutput.log")
set_tests_properties(CTestTestZeroTimeout PROPERTIES
FAIL_REGULAR_EXPRESSION "\\*\\*\\*Timeout")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestDepends/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestDepends/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestDepends ${CMAKE_CTEST_COMMAND}
-C "\${CTestTest_CONFIG}"
-S "${CMake_BINARY_DIR}/Tests/CTestTestDepends/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestDepends/testOutput.log"
)
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestCycle/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestCycle/test.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestCycle ${CMAKE_CTEST_COMMAND}
-C "\${CTestTest_CONFIG}"
-S "${CMake_BINARY_DIR}/Tests/CTestTestCycle/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestCycle/testOutput.log"
)
set_tests_properties(CTestTestCycle PROPERTIES
PASS_REGULAR_EXPRESSION "a cycle exists in the test dependency graph")
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestRunScript/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestRunScript/test.cmake"
@ONLY ESCAPE_QUOTES)
configure_file(
"${CMake_SOURCE_DIR}/Tests/CTestTestRunScript/hello.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestRunScript/hello.cmake"
@ONLY ESCAPE_QUOTES)
add_test(CTestTestRunScript ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestRunScript/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTestRunScript/testOutput.log"
)
add_test(CTestTestShowOnly ${CMAKE_CTEST_COMMAND} -N)
add_test(CTestBatchTest ${CMAKE_CTEST_COMMAND} -B)
# Use macro, not function so that build can still be driven by CMake 2.4.
# After 2.6 is required, this could be a function without the extra 'set'
# calls.
#
macro(add_failed_submit_test name source build in out log regex)
# Have variables named source, build and drop_method because the
# configure_file call expects those variables to be defined.
#
set(source "${source}")
set(build "${build}")
configure_file("${in}" "${out}" @ONLY)
add_test(${name} ${CMAKE_CTEST_COMMAND} -S "${out}" -V --output-log "${log}")
set_tests_properties(${name} PROPERTIES PASS_REGULAR_EXPRESSION "${regex}")
endmacro()
set(regex "(Problems when submitting via S*CP")
set(regex "${regex}|Error message was: ")
set(regex "${regex}([Cc]ould *n.t resolve host")
set(regex "${regex}|[Cc]ould *n.t connect to host")
set(regex "${regex}|Empty reply from server")
set(regex "${regex}|The requested URL returned error")
set(regex "${regex}|libcurl was built with SSL disabled. https: not supported)")
set(regex "${regex}|Submission method .xmlrpc. not compiled into CTest")
set(regex "${regex}|Submission problem")
set(regex "${regex}|Submission successful)")
set(ctest_coverage_labels_args "")
foreach(drop_method cp ftp http https scp xmlrpc)
# Cycle through these values each time through the loop:
if(ctest_coverage_labels_args STREQUAL "")
set(ctest_coverage_labels_args "LABELS Everything")
elseif(ctest_coverage_labels_args STREQUAL "LABELS Everything")
set(ctest_coverage_labels_args "LABELS 0ArgTest")
else()
set(ctest_coverage_labels_args "")
endif()
add_failed_submit_test(CTestTestFailedSubmit-${drop_method}
"${CMake_SOURCE_DIR}/Tests/CTestTest/SmallAndFast"
"${CMake_BINARY_DIR}/Tests/CTestTestFailedSubmits/${drop_method}"
"${CMake_SOURCE_DIR}/Tests/CTestTestFailedSubmits/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestFailedSubmits/test-${drop_method}.cmake"
"${CMake_BINARY_DIR}/Tests/CTestTestFailedSubmits/test-${drop_method}.log"
"${regex}"
)
endforeach()
if (CMAKE_TESTS_CDASH_SERVER)
set(regex "^([^:]+)://([^/]+)(/.*)$")
if ("${CMAKE_TESTS_CDASH_SERVER}" MATCHES "${regex}")
set(protocol "${CMAKE_MATCH_1}")
set(server "${CMAKE_MATCH_2}")
set(path "${CMAKE_MATCH_3}")
else ()
set(protocol "http")
set(server "www.cdash.org")
set(path "/CDash")
message("warning: CMAKE_TESTS_CDASH_SERVER does not match expected regex...")
message(" ...using default url='${protocol}://${server}${path}' for CTestTest[23]")
endif ()
endif ()
if (CTEST_TEST_CTEST AND CMAKE_RUN_LONG_TESTS AND CMAKE_TESTS_CDASH_SERVER)
configure_file("${CMake_SOURCE_DIR}/Tests/CTestTest/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTest/test.cmake" @ONLY ESCAPE_QUOTES)
add_test(CTestTest ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTest/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTest/testOutput.log"
)
configure_file("${CMake_SOURCE_DIR}/Tests/CTestTest2/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTest2/test.cmake" @ONLY ESCAPE_QUOTES)
add_test(CTestTest2 ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTest2/test.cmake" -V
--output-log "${CMake_BINARY_DIR}/Tests/CTestTest2/testOutput.log"
)
configure_file("${CMake_SOURCE_DIR}/Tests/CTestTestChecksum/test.cmake.in"
"${CMake_BINARY_DIR}/Tests/CTestTestChecksum/test.cmake" @ONLY
ESCAPE_QUOTES)
add_test(CTestTestChecksum ${CMAKE_CTEST_COMMAND}
-S "${CMake_BINARY_DIR}/Tests/CTestTestChecksum/test.cmake" -V
--output-log
"${CMake_BINARY_DIR}/Tests/CTestTestChecksum/testOutput.log"
)
set_tests_properties(CTestTestChecksum PROPERTIES PASS_REGULAR_EXPRESSION
"Submission failed: Checksum failed for file")
# these tests take a long time, make sure they have it
# if timeouts have not already been set
get_test_property(CTestTest TIMEOUT PREVIOUS_TIMEOUT)
if ("${PREVIOUS_TIMEOUT}" MATCHES NOTFOUND)
set_tests_properties ( CTestTest
PROPERTIES TIMEOUT ${CMAKE_LONG_TEST_TIMEOUT})
endif ()
get_test_property(CTestTest2 TIMEOUT PREVIOUS_TIMEOUT)
if ("${PREVIOUS_TIMEOUT}" MATCHES NOTFOUND)
set_tests_properties ( CTestTest2
PROPERTIES TIMEOUT ${CMAKE_LONG_TEST_TIMEOUT})
endif ()
endif ()
if("${CMAKE_TEST_GENERATOR}" MATCHES Xcode)
set(CMAKE_SKIP_BOOTSTRAP_TEST 1)
endif()
if(EXISTS "${CMake_BINARY_DIR}/CMakeLists.txt")
# If there is CMakeLists.txt in the binary tree, assume in-source build
set(CMAKE_SKIP_BOOTSTRAP_TEST 1)
endif()
set(bootstrap "")
if(CMAKE_RUN_LONG_TESTS AND NOT CMAKE_SKIP_BOOTSTRAP_TEST)
if(UNIX)
set(bootstrap ${CMake_SOURCE_DIR}/bootstrap)
elseif(MSYS)
configure_file(${CMAKE_CURRENT_SOURCE_DIR}/bootstrap.bat.in
${CMAKE_CURRENT_BINARY_DIR}/bootstrap.bat @ONLY)
set(bootstrap ${CMAKE_CURRENT_BINARY_DIR}/bootstrap.bat)
endif()
endif()
if(bootstrap)
add_test(BootstrapTest ${CMAKE_CTEST_COMMAND}
--build-and-test
${CMake_SOURCE_DIR}
${CMake_BINARY_DIR}/Tests/BootstrapTest
--build-nocmake
--build-noclean
--build-makeprogram ${bootstrap}
--build-generator "${CMAKE_TEST_GENERATOR}"
--test-command
${CMake_BINARY_DIR}/Tests/BootstrapTest/Bootstrap.cmk/cmake)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/BootstrapTest")
# Make this test run early during parallel execution
set_tests_properties(BootstrapTest PROPERTIES COST 5000)
# provide more time for the bootstrap test
get_test_property(BootstrapTest TIMEOUT PREVIOUS_TIMEOUT)
if ("${PREVIOUS_TIMEOUT}" MATCHES NOTFOUND)
set_tests_properties ( BootstrapTest
PROPERTIES TIMEOUT 5400)
endif ()
endif()
if(CMAKE_Fortran_COMPILER)
add_test(Fortran ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Fortran"
"${CMake_BINARY_DIR}/Tests/Fortran"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project testf
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-two-config
--test-command testf)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Fortran")
# FortranCInterface tests.
if(UNIX)
configure_file(${CMAKE_CURRENT_SOURCE_DIR}/FortranC/Flags.cmake.in
${CMAKE_CURRENT_BINARY_DIR}/FortranC/Flags.cmake @ONLY)
add_test(FortranC.Flags ${CMAKE_CMAKE_COMMAND} -P
${CMAKE_CURRENT_BINARY_DIR}/FortranC/Flags.cmake)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/FortranC/Flags")
else()
add_test(FortranC ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/FortranC"
"${CMake_BINARY_DIR}/Tests/FortranC"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project FortranC
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-two-config
--test-command CMakeFiles/FortranCInterface/FortranCInterface)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/FortranC")
endif()
endif()
find_package(Java COMPONENTS Development QUIET)
if(Java_JAVA_EXECUTABLE AND Java_JAVAC_EXECUTABLE AND Java_JAR_EXECUTABLE AND NOT MINGW
AND NOT "${CMAKE_TEST_GENERATOR}" MATCHES "Xcode")
get_filename_component(JNIPATH ${JAVA_COMPILE} PATH)
find_file(JNI_H jni.h
"${JNIPATH}/../include"
"${JNIPATH}/../java/include")
if(JNI_H AND EXISTS "${JNI_H}") # in case jni.h is a broken symlink
file(READ "${JNI_H}" JNI_FILE)
if("${JNI_FILE}" MATCHES "JDK1_2")
add_test(Java ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Java"
"${CMake_BINARY_DIR}/Tests/Java"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project hello
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-two-config
--build-run-dir "${CMake_BINARY_DIR}/Tests/Java/"
--test-command ${JAVA_RUNTIME} -classpath hello.jar HelloWorld)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Java")
endif()
endif()
endif()
# add some cross compiler tests, for now only with makefile based generators
if(CMAKE_TEST_GENERATOR MATCHES "Makefiles" OR CMAKE_TEST_GENERATOR MATCHES "KDevelop")
# if sdcc is found, build the SimpleCOnly project with sdcc
find_program(SDCC_EXECUTABLE sdcc)
mark_as_advanced(SDCC_EXECUTABLE)
if(SDCC_EXECUTABLE)
add_test(SimpleCOnly_sdcc ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/SimpleCOnly"
"${CMake_BINARY_DIR}/Tests/SimpleCOnly_sdcc"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project SimpleC
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-options
"-DCMAKE_SYSTEM_NAME=Generic"
"-DCMAKE_C_COMPILER=${SDCC_EXECUTABLE}")
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/SimpleCOnly_sdcc")
endif()
# If a Linux -> MinGW cross compiler is found then try it
find_program(MINGW_CC_LINUX2WIN_EXECUTABLE i586-mingw32msvc-gcc)
find_program(MINGW_CXX_LINUX2WIN_EXECUTABLE i586-mingw32msvc-g++)
find_program(MINGW_RC_LINUX2WIN_EXECUTABLE i586-mingw32msvc-windres)
mark_as_advanced(MINGW_CC_LINUX2WIN_EXECUTABLE MINGW_CXX_LINUX2WIN_EXECUTABLE MINGW_RC_LINUX2WIN_EXECUTABLE)
if(MINGW_CC_LINUX2WIN_EXECUTABLE AND MINGW_CXX_LINUX2WIN_EXECUTABLE AND MINGW_RC_LINUX2WIN_EXECUTABLE)
add_test(Simple_Mingw_Linux2Win ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/Simple"
"${CMake_BINARY_DIR}/Tests/Simple_Mingw_Linux2Win"
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project Simple
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--build-options
"-DCMAKE_SYSTEM_NAME=Windows"
"-DCMAKE_C_COMPILER=${MINGW_CC_LINUX2WIN_EXECUTABLE}"
"-DCMAKE_CXX_COMPILER=${MINGW_CXX_LINUX2WIN_EXECUTABLE}"
"-DCMAKE_RC_COMPILER=${MINGW_RC_LINUX2WIN_EXECUTABLE}"
)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Simple_Mingw_Linux2Win")
endif()
endif()
if(UNIX)
string(COMPARE EQUAL "${CMAKE_INSTALL_PREFIX}" "${CMake_BINARY_DIR}/Tests/TestShellInstall/Prefix"
PREFIX_IS_FOR_TEST)
if(PREFIX_IS_FOR_TEST)
configure_file(
${CMake_SOURCE_DIR}/Tests/TestInstall.sh.in
${CMake_BINARY_DIR}/Tests/TestShellInstall/TestInstall.sh
@ONLY IMMEDIATE
)
add_test(ShellInstall /bin/sh ${CMake_BINARY_DIR}/Tests/TestShellInstall/TestShellInstall.sh)
endif()
endif()
if(CMAKE_TEST_PROJECT_CSE_DIR)
set(script "${CMAKE_TEST_PROJECT_CSE_DIR}/BuildProjectCSE.cmake")
if(NOT EXISTS "${script}")
set(script "${CMAKE_TEST_PROJECT_CSE_DIR}/cse_build.cmake")
endif()
if(NOT EXISTS "${script}")
message("warning: CMAKE_TEST_PROJECT_CSE_DIR set, but no build script found...")
endif()
add_test(BuildCSE ${CMAKE_CTEST_COMMAND} -V -S "${script}")
set_tests_properties(BuildCSE PROPERTIES TIMEOUT 5400)
endif()
if(CMAKE_TEST_PLPLOT_DIR)
add_test(plplot ${CMAKE_CTEST_COMMAND} -V -S ${CMAKE_TEST_PLPLOT_DIR}/../../EasyDashboardScripts/plplot.cmake )
set_tests_properties ( plplot PROPERTIES TIMEOUT 5400)
endif()
if(CMAKE_TEST_CHICKEN_DIR)
add_test(Chicken ${CMAKE_CTEST_COMMAND} -V -S ${CMAKE_TEST_CHICKEN_DIR}/../../EasyDashboardScripts/Chicken.cmake )
set_tests_properties ( Chicken PROPERTIES TIMEOUT 5400)
endif()
if(CMAKE_TEST_KDELIBS_ALPHA_1_DIR)
add_test(KDELibsAlpha1 ${CMAKE_CTEST_COMMAND} -V -S ${CMAKE_TEST_KDELIBS_ALPHA_1_DIR}/../../EasyDashboardScripts/kdelibs.cmake )
set_tests_properties ( KDELibsAlpha1 PROPERTIES TIMEOUT 5400)
endif()
# If this is not an in-source build, provide a target to wipe out
# all the test build directories.
if(NOT EXISTS "${CMake_BINARY_DIR}/CMakeLists.txt")
configure_file(${CMake_SOURCE_DIR}/Tests/test_clean.cmake.in
${CMake_BINARY_DIR}/Tests/test_clean.cmake @ONLY)
add_custom_target(test_clean
COMMAND ${CMAKE_COMMAND} -P ${CMake_BINARY_DIR}/Tests/test_clean.cmake
COMMENT "Removing test build directories."
)
endif()
add_test(CMakeWizardTest ${CMAKE_CMAKE_COMMAND}
-D build_dir:STRING=${CMAKE_CURRENT_BINARY_DIR}/CMakeWizardTest
-D source_dir:STRING=${CMAKE_CURRENT_SOURCE_DIR}/Tutorial/Step3
-D CMAKE_CTEST_COMMAND:STRING=${CMAKE_CTEST_COMMAND}
-P ${CMAKE_CURRENT_SOURCE_DIR}/CMakeWizardTest.cmake)
# If the cache variable CMAKE_CONTRACT_PROJECTS is set
# then the dashboard will run a contract with CMake test of that
# name. For example CMAKE_CONTRACT_PROJECTS = vtk542 would run
# the vtk542 contract test.
# For each Contract test, the project should provide a directory
# with at least one CMakeLists.txt file that uses ExternalProject
# to download and configure the project. The directory should also
# contain a RunTest.cmake file that has a single set of the format:
# set(project_RUN_TEST testToRun)
# The testToRun should be a test executable that can be run to
# smoke test the build.
foreach(project ${CMAKE_CONTRACT_PROJECTS})
include(Contracts/${project}/RunTest.cmake)
ADD_TEST_MACRO(Contracts.${project}
${${project}_RUN_TEST})
# Contract test timeout in seconds.
# Default to 6 hours.
if(DEFINED ${project}_TEST_TIMEOUT)
set(timeout ${${project}_TEST_TIMEOUT})
elseif(CMAKE_CONTRACT_TEST_TIMEOUT_DEFAULT)
set(timeout ${CMAKE_CONTRACT_TEST_TIMEOUT_DEFAULT})
else()
set(timeout 21600)
endif()
set_tests_properties(Contracts.${project} PROPERTIES TIMEOUT ${timeout})
endforeach()
if(TEST_CompileCommandOutput)
set(CompileCommandOutput_EXTRA_OPTIONS
--build-options -DMAKE_SUPPORTS_SPACES=${MAKE_IS_GNU})
ADD_TEST_MACRO(CompileCommandOutput
"${CMake_BINARY_DIR}/Tests/CMakeLib/runcompilecommands")
endif()
add_test(IncludeDirectories ${CMAKE_CTEST_COMMAND}
--build-and-test
"${CMake_SOURCE_DIR}/Tests/IncludeDirectories"
"${CMake_BINARY_DIR}/Tests/IncludeDirectories"
--build-two-config
--build-generator ${CMAKE_TEST_GENERATOR}
--build-project IncludeDirectories
--build-makeprogram ${CMAKE_TEST_MAKEPROGRAM}
--test-command IncludeDirectories)
list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/IncludeDirectories")
if(CMAKE_USE_KWSTYLE AND KWSTYLE_EXECUTABLE)
# The "make StyleCheck" command line as a test. If the test fails, look
# for lines like "Error #0 (624) Line length exceed 88 (max=79)" in the
# output to find where the style errors are...
add_test(KWStyle ${KWSTYLE_EXECUTABLE}
-xml ${CMake_BINARY_DIR}/CMake.kws.xml
-o ${CMake_SOURCE_DIR}/Utilities/KWStyle/CMakeOverwrite.txt
-v
-D ${CMake_BINARY_DIR}/CMakeKWSFiles.txt
)
set_tests_properties(KWStyle PROPERTIES
WORKING_DIRECTORY ${CMake_BINARY_DIR}/Utilities/KWStyle)
endif()
endif()
subdirs(CMakeTests)
Computing file changes ...
