Revision 08e39982ef64f800fd1f9b9b92968d14d5fafa82 authored by Christian Lamparter on 17 September 2018, 15:22:40 UTC, committed by David S. Miller on 19 September 2018, 02:56:29 UTC
On the Netgear WNDAP620, the emac ethernet isn't receiving nor xmitting any frames from/to the RTL8363SB (identifies itself as a RTL8367RB). This is caused by the emac hardware not knowing the forced link parameters for speed, duplex, pause, etc. This begs the question, how this was working on the original driver code, when it was necessary to set the phy_address and phy_map to 0xffffffff. But I guess without access to the old PPC405/440/460 hardware, it's not possible to know. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent e285d5b
| File | Mode | Size |
|---|---|---|
| Documentation | ||
| LICENSES | ||
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| drivers | ||
| firmware | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | -rw-r--r-- | 12.8 KB |
| .cocciconfig | -rw-r--r-- | 59 bytes |
| .get_maintainer.ignore | -rw-r--r-- | 31 bytes |
| .gitattributes | -rw-r--r-- | 30 bytes |
| .gitignore | -rw-r--r-- | 1.5 KB |
| .mailmap | -rw-r--r-- | 9.7 KB |
| COPYING | -rw-r--r-- | 423 bytes |
| CREDITS | -rw-r--r-- | 96.4 KB |
| Kbuild | -rw-r--r-- | 2.2 KB |
| Kconfig | -rw-r--r-- | 563 bytes |
| MAINTAINERS | -rw-r--r-- | 459.0 KB |
| Makefile | -rw-r--r-- | 58.6 KB |
| README | -rw-r--r-- | 800 bytes |
Computing file changes ...
