Revision 0b12024d765872ee0d9e9edc6a701ca1204bd9a6 authored by Felix Ruess on 05 October 2013, 11:19:08 UTC, committed by Felix Ruess on 05 October 2013, 12:57:00 UTC
most recent leap second was inserted on June 30, 2012 at 23:59:60 UTC So since the gps epoch 1980 we have 16 leap seconds.
1 parent 491a85f
Makefile.lpc21
# Hey Emacs, this is a -*- makefile -*-
#
# Copyright (C) 2003-2005 Pascal Brisset, Antoine Drouin
#
# This file is part of paparazzi.
#
# paparazzi is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# paparazzi is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with paparazzi; see the file COPYING. If not, write to
# the Free Software Foundation, 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
#
#
# This is the common Makefile for the arm7-target.
#
#TODO: this is not needed in some cases (e.g. ap target as it is defined there already)
# but it is needed for other targets like tunnel
# only define here or elsewhere?
SRC_ARCH = arch/lpc21
# Launch with "make Q=''" to get full command display
Q=@
#
# find compiler toolchain
#
include $(PAPARAZZI_SRC)/conf/Makefile.arm-embedded
#
# if the new arm-none-eabi multilib compiler was not found try the old arm-elf one
#
ifeq ($(CC),)
CC = $(shell which arm-elf-gcc)
LD = $(shell which arm-elf-gcc)
CP = $(shell which arm-elf-objcopy)
DMP = $(shell which arm-elf-objdump)
NM = $(shell which arm-elf-nm)
SIZE = $(shell which arm-elf-size)
endif
# MCU name and submodel
MCU = arm7tdmi
THUMB = -mthumb
THUMB_IW = -mthumb-interwork
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
#FLASH_MODE=ISP
SRCARM = $($(TARGET).srcs)
ASRCARM = crt0.S
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
#OPT=3
CSTANDARD = -std=gnu99
CINCS = $(INCLUDES) -I$(SRC_ARCH)/include
# Compiler flags.
CFLAGS = $(CINCS)
CFLAGS += -O$(OPT)
# CFLAGS += -malignment-traps
CFLAGS += -Wa,-adhlns=$(OBJDIR)/$(notdir $(subst $(suffix $<),.lst,$<))
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += -ffunction-sections -fdata-sections
CFLAGS += -finline-limit=1200 --param inline-unit-growth=100
# flags for warnings
CFLAGS += -Wall -Wextra
CFLAGS += -Wcast-qual -Wimplicit -Wcast-align
CFLAGS += -Wpointer-arith -Wswitch
CFLAGS += -Wredundant-decls -Wreturn-type -Wshadow -Wunused
CFLAGS += -Wstrict-prototypes -Wmissing-declarations
CFLAGS += -Wmissing-prototypes -Wnested-externs
CFLAGS += $(CSTANDARD)
CFLAGS += $($(TARGET).CFLAGS) $(LOCAL_CFLAGS)
# Assembler flags.
ASFLAGS = -Wa,-adhlns=$(OBJDIR)/$(notdir $(<:.S=.lst))
#Additional libraries.
MATH_LIB = -lm
# Linker flags.
LDFLAGS = -n -nostartfiles -Wl,-Map=$(OBJDIR)/$(TARGET).map,--cref
LDFLAGS += -lc
LDFLAGS += $(MATH_LIB)
LDFLAGS += -lc -lgcc
LDFLAGS += $(CPLUSPLUS_LIB)
LDFLAGS += -Wl,--gc-sections
ifndef LDSCRIPT
ifeq ($(FLASH_MODE),ISP)
LDSCRIPT = $(SRC_ARCH)/LPC2148-ROM.ld
else
LDSCRIPT = $(SRC_ARCH)/LPC2148-ROM-bl.ld
endif
endif
LDFLAGS +=-T$(LDSCRIPT)
# ---------------------------------------------------------------------------
# Flash-Programming support using lpc21isp by Martin Maurer
# Settings and variables:
LPC21ISP = lpc21isp
LPC21ISP_PORT ?= /dev/ttyS0
LPC21ISP_FLASHFILE = $(OBJDIR)/$(TARGET).hex
# verbose output:
#LPC21ISP_DEBUG = -debug
# enter bootloader via RS232 DTR/RTS (only if hardware supports this
# feature - see Philips AppNote):
ifndef LPC21ISP_CONTROL
LPC21ISP_CONTROL =
# -control
endif
# ---------------------------------------------------------------------------
# Flash-Programming support using lpc21iap by Martin Muller (usb bootloader)
LPC21IAP = $(PAPARAZZI_SRC)/sw/ground_segment/lpc21iap/lpc21iap
# ---------------------------------------------------------------------------
# Flash-Programming support using openocd
OOCD_INTERFACE = arm-usb-ocd
OOCD_TARGET = csc
# Define all object files.
COBJ = $(SRC:%.c=$(OBJDIR)/%.o)
AOBJ = $(ASRC:%.S=$(OBJDIR)/%.o)
COBJARM = $(SRCARM:%.c=$(OBJDIR)/%.o)
AOBJARM = $(ASRCARM:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(ASRC:.S=.lst) $(ASRCARM:.S=.lst) $(SRC:.c=.lst) $(SRCARM:.c=.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mcpu=$(MCU) $(THUMB_IW) -I. $(CFLAGS)
ALL_ASFLAGS = -mcpu=$(MCU) $(THUMB_IW) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: printcommands sizebefore build sizeafter
build: elf hex lss sym
elf: $(OBJDIR)/$(TARGET).elf
hex: $(OBJDIR)/$(TARGET).hex
lss: $(OBJDIR)/$(TARGET).lss
sym: $(OBJDIR)/$(TARGET).sym
# Program the device.
load upload program: $(OBJDIR)/$(TARGET).hex
ifeq ($(FLASH_MODE),IAP)
$(SUDO) $(LPC21IAP) $(OBJDIR)/$(TARGET).elf
else ifeq ($(FLASH_MODE),JTAG)
@echo "Using OOCD = $(OOCD)"
@echo -e " OOCD\t$<"
$(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
-f board/$(OOCD_TARGET).cfg \
-c init \
-c "reset halt" \
-c "flash write_image erase $(OBJDIR)/$(TARGET).bin 0x08000000" \
-c reset \
-c shutdown
else
@echo
$(LPC21ISP) $(LPC21ISP_CONTROL) $(LPC21ISP_DEBUG) $(LPC21ISP_FLASHFILE) $(LPC21ISP_PORT) $(LPC21ISP_BAUD) $(LPC21ISP_XTAL)
endif
# Create final output files (.hex, .eep) from ELF output file.
# TODO: handling the .eeprom-section should be redundant
%.hex: %.elf
@echo OBJC $@
$(Q)$(CP) -O $(FORMAT) $< $@
# Create extended listing file from ELF output file.
# testing: option -C
%.lss: %.elf
@echo OBJD $@
$(Q)$(DMP) -h -S -C $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo NM $@
$(Q)$(NM) -n $< > $@
# Link: create ELF output file from object files.
.SECONDARY : $(OBJDIR)/$(TARGET).elf
.PRECIOUS : $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ)
%.elf: $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ)
@echo LD $@
$(Q)$(CC) $(THUMB) $(ALL_CFLAGS) $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ) --output $@ $(LDFLAGS) $($(TARGET).LDFLAGS)
# Compile: create object files from C source files. ARM-only
$(OBJDIR)/%.o : %.c $(OBJDIR)/../Makefile.ac
@echo CC $@
$(Q)test -d $(dir $@) || mkdir -p $(dir $@)
$(Q)$(CC) -c $(ALL_CFLAGS) $(CONLYFLAGS) $< -o $@
$(OBJDIR)/%.o : $(SRC_ARCH)/lpcusb/%.c $(OBJDIR)/../Makefile.ac
@echo CC $@
$(Q)$(CC) -c $(ALL_CFLAGS) $(CONLYFLAGS) $< -o $@
# grab files in var/$(AIRCRAFT)/$(TARGET) aka $(OBJDIR)
#$(OBJDIR)/%.o : $(OBJDIR)/%.c
# @echo CC $@
# $(Q)$(CC) -c $(ALL_CFLAGS) $(CONLYFLAGS) $< -o $@
# Assemble: create object files from assembler source files. ARM/Thumb
$(AOBJ) : $(OBJDIR)/%.o : %.S
@echo AS $@
$(Q)$(CC) -c $(THUMB) $(ALL_ASFLAGS) $< -o $@
# Assemble: create object files from assembler source files. ARM-only
$(AOBJARM) : $(OBJDIR)/%.o : $(SRC_ARCH)/%.S
@echo AS $@
$(Q)$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Listing of phony targets.
.PHONY : all build elf hex lss sym load upload program
#
# Dependencies
#
$(OBJDIR)/.depend:
@echo DEPEND $@
@test -d $(OBJDIR) || mkdir -p $(OBJDIR)
$(Q)$(CC) -MM -MG $(CFLAGS) $($(TARGET).srcs) | sed 's|\([^\.]*\.o\)|$(OBJDIR)/\1|' > $@
ifneq ($(MAKECMDGOALS),clean)
-include $(OBJDIR)/.depend
endif
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...