Revision 0b41d6ca616ddeb3b6c0a80e8770b6f53cd42806 authored by Nicholas Bellinger on 18 September 2013, 19:48:27 UTC, committed by Nicholas Bellinger on 02 October 2013, 04:27:30 UTC
This patch fixes a bug where ib_destroy_cm_id() was incorrectly being called after srpt_destroy_ch_ib() had destroyed the active QP. This would result in the following failed SRP_LOGIN_REQ messages: Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1762bd, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c903009f8f41) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff1758f9, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c903009f8f42) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff175941, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 2 (guid=0xfe80000000000000:0x2c90300a3cfb2) Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9 rejected SRP_LOGIN_REQ because creating a new RDMA channel failed. Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) mlx4_core 0000:84:00.0: command 0x19 failed: fw status = 0x9 rejected SRP_LOGIN_REQ because creating a new RDMA channel failed. Received SRP_LOGIN_REQ with i_port_id 0x0:0x2590ffff176299, t_port_id 0x2c903009f8f40:0x2c903009f8f40 and it_iu_len 260 on port 1 (guid=0xfe80000000000000:0x2c90300a3cfb1) Reported-by: Navin Ahuja <navin.ahuja@saratoga-speed.com> Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
1 parent 3e9e01d
rcu.h
/*
* Read-Copy Update definitions shared among RCU implementations.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright IBM Corporation, 2011
*
* Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
*/
#ifndef __LINUX_RCU_H
#define __LINUX_RCU_H
#ifdef CONFIG_RCU_TRACE
#define RCU_TRACE(stmt) stmt
#else /* #ifdef CONFIG_RCU_TRACE */
#define RCU_TRACE(stmt)
#endif /* #else #ifdef CONFIG_RCU_TRACE */
/*
* Process-level increment to ->dynticks_nesting field. This allows for
* architectures that use half-interrupts and half-exceptions from
* process context.
*
* DYNTICK_TASK_NEST_MASK defines a field of width DYNTICK_TASK_NEST_WIDTH
* that counts the number of process-based reasons why RCU cannot
* consider the corresponding CPU to be idle, and DYNTICK_TASK_NEST_VALUE
* is the value used to increment or decrement this field.
*
* The rest of the bits could in principle be used to count interrupts,
* but this would mean that a negative-one value in the interrupt
* field could incorrectly zero out the DYNTICK_TASK_NEST_MASK field.
* We therefore provide a two-bit guard field defined by DYNTICK_TASK_MASK
* that is set to DYNTICK_TASK_FLAG upon initial exit from idle.
* The DYNTICK_TASK_EXIT_IDLE value is thus the combined value used upon
* initial exit from idle.
*/
#define DYNTICK_TASK_NEST_WIDTH 7
#define DYNTICK_TASK_NEST_VALUE ((LLONG_MAX >> DYNTICK_TASK_NEST_WIDTH) + 1)
#define DYNTICK_TASK_NEST_MASK (LLONG_MAX - DYNTICK_TASK_NEST_VALUE + 1)
#define DYNTICK_TASK_FLAG ((DYNTICK_TASK_NEST_VALUE / 8) * 2)
#define DYNTICK_TASK_MASK ((DYNTICK_TASK_NEST_VALUE / 8) * 3)
#define DYNTICK_TASK_EXIT_IDLE (DYNTICK_TASK_NEST_VALUE + \
DYNTICK_TASK_FLAG)
/*
* debug_rcu_head_queue()/debug_rcu_head_unqueue() are used internally
* by call_rcu() and rcu callback execution, and are therefore not part of the
* RCU API. Leaving in rcupdate.h because they are used by all RCU flavors.
*/
#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
# define STATE_RCU_HEAD_READY 0
# define STATE_RCU_HEAD_QUEUED 1
extern struct debug_obj_descr rcuhead_debug_descr;
static inline int debug_rcu_head_queue(struct rcu_head *head)
{
int r1;
r1 = debug_object_activate(head, &rcuhead_debug_descr);
debug_object_active_state(head, &rcuhead_debug_descr,
STATE_RCU_HEAD_READY,
STATE_RCU_HEAD_QUEUED);
return r1;
}
static inline void debug_rcu_head_unqueue(struct rcu_head *head)
{
debug_object_active_state(head, &rcuhead_debug_descr,
STATE_RCU_HEAD_QUEUED,
STATE_RCU_HEAD_READY);
debug_object_deactivate(head, &rcuhead_debug_descr);
}
#else /* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
static inline int debug_rcu_head_queue(struct rcu_head *head)
{
return 0;
}
static inline void debug_rcu_head_unqueue(struct rcu_head *head)
{
}
#endif /* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
extern void kfree(const void *);
static inline bool __rcu_reclaim(const char *rn, struct rcu_head *head)
{
unsigned long offset = (unsigned long)head->func;
if (__is_kfree_rcu_offset(offset)) {
RCU_TRACE(trace_rcu_invoke_kfree_callback(rn, head, offset));
kfree((void *)head - offset);
return 1;
} else {
RCU_TRACE(trace_rcu_invoke_callback(rn, head));
head->func(head);
return 0;
}
}
extern int rcu_expedited;
#ifdef CONFIG_RCU_STALL_COMMON
extern int rcu_cpu_stall_suppress;
int rcu_jiffies_till_stall_check(void);
#endif /* #ifdef CONFIG_RCU_STALL_COMMON */
#endif /* __LINUX_RCU_H */
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...