| 0b4295b | LimingWu | 05 December 2019, 12:18:18 UTC | io_uring: fix a typo in a comment thatn -> than. Signed-off-by: Liming Wu <19092205@suning.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 05 December 2019, 14:59:37 UTC |
| 4493233 | Pavel Begunkov | 05 December 2019, 13:16:35 UTC | io_uring: hook all linked requests via link_list Links are created by chaining requests through req->list with an exception that head uses req->link_list. (e.g. link_list->list->list) Because of that, io_req_link_next() needs complex splicing to advance. Link them all through list_list. Also, it seems to be simpler and more consistent IMHO. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 05 December 2019, 13:54:52 UTC |
| 2e6e1fd | Pavel Begunkov | 05 December 2019, 13:15:45 UTC | io_uring: fix error handling in io_queue_link_head In case of an error io_submit_sqe() drops a request and continues without it, even if the request was a part of a link. Not only it doesn't cancel links, but also may execute wrong sequence of actions. Stop consuming sqes, and let the user handle errors. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 05 December 2019, 13:54:51 UTC |
| 78076bb | Jens Axboe | 05 December 2019, 02:56:40 UTC | io_uring: use hash table for poll command lookups We recently changed this from a single list to an rbtree, but for some real life workloads, the rbtree slows down the submission/insertion case enough so that it's the top cycle consumer on the io_uring side. In testing, using a hash table is a more well rounded compromise. It is fast for insertion, and as long as it's sized appropriately, it works well for the cancellation case as well. Running TAO with a lot of network sockets, this removes io_poll_req_insert() from spending 2% of the CPU cycles. Reported-by: Dan Melnic <dmm@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 05 December 2019, 03:12:58 UTC |
| 08bdcc3 | Jens Axboe | 05 December 2019, 00:19:44 UTC | io-wq: clear node->next on list deletion If someone removes a node from a list, and then later adds it back to a list, we can have invalid data in ->next. This can cause all sorts of issues. One such use case is the IORING_OP_POLL_ADD command, which will do just that if we race and get woken twice without any pending events. This is a pretty rare case, but can happen under extreme loads. Dan reports that he saw the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD d283ce067 P4D d283ce067 PUD e5ca04067 PMD 0 Oops: 0002 [#1] SMP CPU: 17 PID: 10726 Comm: tao:fast-fiber Kdump: loaded Not tainted 5.2.9-02851-gac7bc042d2d1 #116 Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019 RIP: 0010:io_wqe_enqueue+0x3e/0xd0 Code: 34 24 74 55 8b 47 58 48 8d 6f 50 85 c0 74 50 48 89 df e8 35 7c 75 00 48 83 7b 08 00 48 8b 14 24 0f 84 84 00 00 00 48 8b 4b 10 <48> 89 11 48 89 53 10 83 63 20 fe 48 89 c6 48 89 df e8 0c 7a 75 00 RSP: 0000:ffffc90006858a08 EFLAGS: 00010082 RAX: 0000000000000002 RBX: ffff889037492fc0 RCX: 0000000000000000 RDX: ffff888e40cc11a8 RSI: ffff888e40cc11a8 RDI: ffff889037492fc0 RBP: ffff889037493010 R08: 00000000000000c3 R09: ffffc90006858ab8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888e40cc11a8 R13: 0000000000000000 R14: 00000000000000c3 R15: ffff888e40cc1100 FS: 00007fcddc9db700(0000) GS:ffff88903fa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000e479f5003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> io_poll_wake+0x12f/0x2a0 __wake_up_common+0x86/0x120 __wake_up_common_lock+0x7a/0xc0 sock_def_readable+0x3c/0x70 tcp_rcv_established+0x557/0x630 tcp_v6_do_rcv+0x118/0x3c0 tcp_v6_rcv+0x97e/0x9d0 ip6_protocol_deliver_rcu+0xe3/0x440 ip6_input+0x3d/0xc0 ? ip6_protocol_deliver_rcu+0x440/0x440 ipv6_rcv+0x56/0xd0 ? ip6_rcv_finish_core.isra.18+0x80/0x80 __netif_receive_skb_one_core+0x50/0x70 netif_receive_skb_internal+0x2f/0xa0 napi_gro_receive+0x125/0x150 mlx5e_handle_rx_cqe+0x1d9/0x5a0 ? mlx5e_poll_tx_cq+0x305/0x560 mlx5e_poll_rx_cq+0x49f/0x9c5 mlx5e_napi_poll+0xee/0x640 ? smp_reschedule_interrupt+0x16/0xd0 ? reschedule_interrupt+0xf/0x20 net_rx_action+0x286/0x3d0 __do_softirq+0xca/0x297 irq_exit+0x96/0xa0 do_IRQ+0x54/0xe0 common_interrupt+0xf/0xf </IRQ> RIP: 0033:0x7fdc627a2e3a Code: 31 c0 85 d2 0f 88 f6 00 00 00 55 48 89 e5 41 57 41 56 4c 63 f2 41 55 41 54 53 48 83 ec 18 48 85 ff 0f 84 c7 00 00 00 48 8b 07 <41> 89 d4 49 89 f5 48 89 fb 48 85 c0 0f 84 64 01 00 00 48 83 78 10 when running a networked workload with about 5000 sockets being polled for. Fix this by clearing node->next when the node is being removed from the list. Fixes: 6206f0e180d4 ("io-wq: shrink io_wq_work a bit") Reported-by: Dan Melnic <dmm@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 05 December 2019, 00:26:57 UTC |
| 2d28390 | Jens Axboe | 04 December 2019, 18:08:05 UTC | io_uring: ensure deferred timeouts copy necessary data If we defer a timeout, we should ensure that we copy the timespec when we have consumed the sqe. This is similar to commit f67676d160c6 for read/write requests. We already did this correctly for timeouts deferred as links, but do it generally and use the infrastructure added by commit 1a6b74fc8702 instead of having the timeout deferral use its own. Signed-off-by: Jens Axboe <axboe@kernel.dk> | 04 December 2019, 18:12:08 UTC |
| 901e59b | Jens Axboe | 04 December 2019, 17:34:03 UTC | io_uring: allow IO_SQE_* flags on IORING_OP_TIMEOUT There's really no reason why we forbid things like link/drain etc on regular timeout commands. Enable the usual SQE flags on timeouts. Reported-by: 李通洲 <carter.li@eoitek.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 04 December 2019, 17:34:03 UTC |
| bca1c43 | Jens Axboe | 04 December 2019, 16:17:41 UTC | null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONED If BLK_DEV_ZONED isn't set, 'ret' isn't used. This makes gcc complain, rightfully. Move ret where it is used. Fixes: 979d54475e0b ("null_blk: cleanup null_gendisk_register") Signed-off-by: Jens Axboe <axboe@kernel.dk> | 04 December 2019, 16:17:41 UTC |
| f1acbf2 | Ming Lei | 04 December 2019, 11:31:15 UTC | brd: warn on un-aligned buffer Queue dma alignment limit requires users(fs, target, ...) of block layer to pass aligned buffer. So far brd doesn't support un-aligned buffer, even though it is easy to support it. However, given brd is often used for debug purpose, and there are other drivers which can't support un-aligned buffer too. So add warning so that brd users know what to fix. Reported-by: Stephen Rust <srust@blockbridge.com> Cc: Stephen Rust <srust@blockbridge.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 04 December 2019, 16:04:26 UTC |
| 36582a5 | Ming Lei | 04 December 2019, 11:31:14 UTC | brd: remove max_hw_sectors queue limit Now we depend on blk_queue_split() to respect most of queue limit (the only one exception could be dma alignment), however blk_queue_split() isn't used for brd, so this limit isn't respected since v4.3. Also max_hw_sectors limit doesn't play a big role for brd, which is added since brd is added to tree for unknown reason. So remove it. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 04 December 2019, 16:04:25 UTC |
| f9bd84a | SeongJae Park | 26 November 2019, 15:36:05 UTC | xen/blkback: Avoid unmapping unmapped grant pages For each I/O request, blkback first maps the foreign pages for the request to its local pages. If an allocation of a local page for the mapping fails, it should unmap every mapping already made for the request. However, blkback's handling mechanism for the allocation failure does not mark the remaining foreign pages as unmapped. Therefore, the unmap function merely tries to unmap every valid grant page for the request, including the pages not mapped due to the allocation failure. On a system that fails the allocation frequently, this problem leads to following kernel crash. [ 372.012538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 [ 372.012546] IP: [<ffffffff814071ac>] gnttab_unmap_refs.part.7+0x1c/0x40 [ 372.012557] PGD 16f3e9067 PUD 16426e067 PMD 0 [ 372.012562] Oops: 0002 [#1] SMP [ 372.012566] Modules linked in: act_police sch_ingress cls_u32 ... [ 372.012746] Call Trace: [ 372.012752] [<ffffffff81407204>] gnttab_unmap_refs+0x34/0x40 [ 372.012759] [<ffffffffa0335ae3>] xen_blkbk_unmap+0x83/0x150 [xen_blkback] ... [ 372.012802] [<ffffffffa0336c50>] dispatch_rw_block_io+0x970/0x980 [xen_blkback] ... Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset This commit fixes this problem by marking the grant pages of the given request that didn't mapped due to the allocation failure as invalid. Fixes: c6cc142dac52 ("xen-blkback: use balloon pages for all mappings") Reviewed-by: David Woodhouse <dwmw@amazon.de> Reviewed-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Paul Durrant <pdurrant@amazon.co.uk> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 21:03:24 UTC |
| 87f80d6 | Jens Axboe | 03 December 2019, 18:23:54 UTC | io_uring: handle connect -EINPROGRESS like -EAGAIN Right now we return it to userspace, which means the application has to poll for the socket to be writeable. Let's just treat it like -EAGAIN and have io_uring handle it internally, this makes it much easier to use. Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 18:23:54 UTC |
| 6c6b354 | Christoph Hellwig | 03 December 2019, 09:39:08 UTC | block: set the zone size in blk_revalidate_disk_zones atomically The current zone revalidation code has a major problem in that it doesn't update the zone size and q->nr_zones atomically, leading to a short window where an out of bounds access to the zone arrays is possible. To fix this move the setting of the zone size into the crticial sections blk_revalidate_disk_zones so that it gets updated together with the zone bitmaps and q->nr_zones. This also slightly simplifies the caller as it deducts the zone size from the report_zones. This change also allows to check for a power of two zone size in generic code. Reported-by: Hans Holmberg <hans@owltronix.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 17:18:22 UTC |
| ae58954 | Christoph Hellwig | 03 December 2019, 09:39:07 UTC | block: don't handle bio based drivers in blk_revalidate_disk_zones bio based drivers only need to update q->nr_zones. Do that manually instead of overloading blk_revalidate_disk_zones to keep that function simpler for the next round of changes that will rely even more on the request based functionality. Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 15:51:25 UTC |
| e94f581 | Christoph Hellwig | 03 December 2019, 09:39:06 UTC | block: allocate the zone bitmaps lazily Allocate the conventional zone bitmap and the sequential zone locking bitmap only when we find a zone of the respective type. This avoids wasting memory on the conventional zone bitmap for devices that only have sequential zones, and will also prepare for other future changes. Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 15:51:25 UTC |
| f216fdd | Christoph Hellwig | 03 December 2019, 09:39:05 UTC | block: replace seq_zones_bitmap with conv_zones_bitmap Invert the meaning of seq_zones_bitmap by keeping a bitmap of conventional zones. This allows not having a bitmap for devices that do not have conventional zones. Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 15:51:25 UTC |
| 9b38bb4 | Christoph Hellwig | 03 December 2019, 09:39:04 UTC | block: simplify blkdev_nr_zones Simplify the arguments to blkdev_nr_zones by passing a gendisk instead of the block_device and capacity. This also removes the need for __blkdev_nr_zones as all callers are outside the fast path and can deal with the additional branch. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 15:51:24 UTC |
| bb55628 | Christoph Hellwig | 03 December 2019, 09:39:03 UTC | block: remove the empty line at the end of blk-zoned.c Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 15:51:24 UTC |
| 979d544 | Christoph Hellwig | 03 December 2019, 09:39:02 UTC | null_blk: cleanup null_gendisk_register Use a saner size calculation, and do a trivial cleanup on the zone revalidation to prepare to future changes. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 15:51:24 UTC |
| 5c4bd1f | Damien Le Moal | 03 December 2019, 09:39:01 UTC | null_blk: fix zone size paramter check For zoned=1 mode, the zone size must be a power of 2. Check this not only when the zone size is specified during modprobe, but also when creating a zoned null_blk device using configfs. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 15:51:24 UTC |
| 795ee49 | Pavel Begunkov | 30 November 2019, 20:23:52 UTC | block: optimise bvec_iter_advance() bvec_iter_advance() is quite popular, but compilers fail to do proper alias analysis and optimise it good enough. The assembly is checked for gcc 9.2, x86-64. - remove @iter->bi_size from min(...), as it's always less than @bytes. Modify at the beginning and forget about it. - the compiler isn't able to collapse memory dependencies and remove writes in the loop. Help it by explicitely using local vars. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 14:36:38 UTC |
| 8cdda87 | Jackie Liu | 02 December 2019, 09:14:53 UTC | io_uring: remove io_wq_current_is_worker Since commit b18fdf71e01f ("io_uring: simplify io_req_link_next()"), the io_wq_current_is_worker function is no longer needed, clean it up. Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 14:04:32 UTC |
| 22efde5 | Jackie Liu | 02 December 2019, 09:14:52 UTC | io_uring: remove parameter ctx of io_submit_state_start Parameter ctx we have never used, clean it up. Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 14:04:32 UTC |
| da8c969 | Jens Axboe | 03 December 2019, 01:51:26 UTC | io_uring: mark us with IORING_FEAT_SUBMIT_STABLE If this flag is set, applications can be certain that any data for async offload has been consumed when the kernel has consumed the SQE. Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 14:04:32 UTC |
| f499a02 | Jens Axboe | 02 December 2019, 23:28:46 UTC | io_uring: ensure async punted connect requests copy data Just like commit f67676d160c6 for read/write requests, this one ensures that the sockaddr data has been copied for IORING_OP_CONNECT if we need to punt the request to async context. Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 14:04:30 UTC |
| 03b1230 | Jens Axboe | 03 December 2019, 01:50:25 UTC | io_uring: ensure async punted sendmsg/recvmsg requests copy data Just like commit f67676d160c6 for read/write requests, this one ensures that the msghdr data is fully copied if we need to punt a recvmsg or sendmsg system call to async context. Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 14:03:35 UTC |
| f67676d | Jens Axboe | 02 December 2019, 18:03:47 UTC | io_uring: ensure async punted read/write requests copy iovec Currently we don't copy the iovecs when we punt to async context. This can be problematic for applications that store the iovec on the stack, as they often assume that it's safe to let the iovec go out of scope as soon as IO submission has been called. This isn't always safe, as we will re-copy the iovec once we're in async context. Make this 100% safe by copying the iovec just once. With this change, applications may safely store the iovec on the stack for all cases. Reported-by: 李通洲 <carter.li@eoitek.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 04:33:25 UTC |
| 1a6b74f | Jens Axboe | 02 December 2019, 17:33:15 UTC | io_uring: add general async offload context Right now we just copy the sqe for async offload, but we want to store more context across an async punt. In preparation for doing so, put the sqe copy inside a structure that we can expand. With this pointer added, we can get rid of REQ_F_FREE_SQE, as that is now indicated by whether req->io is NULL or not. No functional changes in this patch. Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 01:49:33 UTC |
| 490547c | Eric Biggers | 02 December 2019, 18:21:34 UTC | block: don't send uevent for empty disk when not invalidating Commit 6917d0689993 ("block: merge invalidate_partitions into rescan_partitions") caused a regression where systemd-udevd spins forever using max CPU starting at boot time. It's caused by a behavior change where a KOBJ_CHANGE uevent is now sent in a case where previously it wasn't. Restore the old behavior. Fixes: 6917d0689993 ("block: merge invalidate_partitions into rescan_partitions") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 01:49:30 UTC |
| 441cdbd | Jens Axboe | 03 December 2019, 01:49:10 UTC | io_uring: transform send/recvmsg() -ERESTARTSYS to -EINTR We should never return -ERESTARTSYS to userspace, transform it into -EINTR. Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Jens Axboe <axboe@kernel.dk> | 03 December 2019, 01:49:10 UTC |
| 0b8c0ec | Jens Axboe | 02 December 2019, 15:50:00 UTC | io_uring: use current task creds instead of allocating a new one syzbot reports: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9217 Comm: io_uring-sq Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:creds_are_invalid kernel/cred.c:792 [inline] RIP: 0010:__validate_creds include/linux/cred.h:187 [inline] RIP: 0010:override_creds+0x9f/0x170 kernel/cred.c:550 Code: ac 25 00 81 fb 64 65 73 43 0f 85 a3 37 00 00 e8 17 ab 25 00 49 8d 7c 24 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 96 00 00 00 41 8b 5c 24 10 bf RSP: 0018:ffff88809c45fda0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000043736564 RCX: ffffffff814f3318 RDX: 0000000000000002 RSI: ffffffff814f3329 RDI: 0000000000000010 RBP: ffff88809c45fdb8 R08: ffff8880a3aac240 R09: ffffed1014755849 R10: ffffed1014755848 R11: ffff8880a3aac247 R12: 0000000000000000 R13: ffff888098ab1600 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd51c40664 CR3: 0000000092641000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: io_sq_thread+0x1c7/0xa20 fs/io_uring.c:3274 kthread+0x361/0x430 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Modules linked in: ---[ end trace f2e1a4307fbe2245 ]--- RIP: 0010:creds_are_invalid kernel/cred.c:792 [inline] RIP: 0010:__validate_creds include/linux/cred.h:187 [inline] RIP: 0010:override_creds+0x9f/0x170 kernel/cred.c:550 Code: ac 25 00 81 fb 64 65 73 43 0f 85 a3 37 00 00 e8 17 ab 25 00 49 8d 7c 24 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 96 00 00 00 41 8b 5c 24 10 bf RSP: 0018:ffff88809c45fda0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000043736564 RCX: ffffffff814f3318 RDX: 0000000000000002 RSI: ffffffff814f3329 RDI: 0000000000000010 RBP: ffff88809c45fdb8 R08: ffff8880a3aac240 R09: ffffed1014755849 R10: ffffed1014755848 R11: ffff8880a3aac247 R12: 0000000000000000 R13: ffff888098ab1600 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd51c40664 CR3: 0000000092641000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 which is caused by slab fault injection triggering a failure in prepare_creds(). We don't actually need to create a copy of the creds as we're not modifying it, we just need a reference on the current task creds. This avoids the failure case as well, and propagates the const throughout the stack. Fixes: 181e448d8709 ("io_uring: async workers should inherit the user creds") Reported-by: syzbot+5320383e16029ba057ff@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 02 December 2019, 15:50:00 UTC |
| 72c0870 | Linus Torvalds | 02 December 2019, 02:45:29 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - updates to Ilitech driver to support ILI2117 - face lift of st1232 driver to support MT-B protocol - a new driver for i.MX system controller keys - mpr121 driver now supports polling mode - various input drivers have been switched away from input_polled_dev to use polled mode of regular input devices - other assorted cleanups and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits) Input: synaptics-rmi4 - fix various V4L2 compliance problems in F54 Input: synaptics - switch another X1 Carbon 6 to RMI/SMbus Input: fix Kconfig indentation Input: imx_sc_key - correct SCU message structure to avoid stack corruption Input: ili210x - optionally show calibrate sysfs attribute Input: ili210x - add resolution to chip operations structure Input: ili210x - do not retrieve/print chip firmware version Input: mms114 - use device_get_match_data Input: ili210x - remove unneeded suspend and resume handlers Input: ili210x - do not unconditionally mark touchscreen as wakeup source Input: ili210x - define and use chip operations structure Input: ili210x - do not set parent device explicitly Input: ili210x - handle errors from input_mt_init_slots() Input: ili210x - switch to using threaded IRQ Input: ili210x - add ILI2117 support dt-bindings: input: touchscreen: ad7879: generic node names in example Input: ar1021 - fix typo in preprocessor macro name Input: synaptics-rmi4 - simplify data read in rmi_f54_work Input: kxtj9 - switch to using polled mode of input devices Input: kxtj9 - switch to using managed resources ... | 02 December 2019, 02:45:29 UTC |
| d10032d | Linus Torvalds | 02 December 2019, 02:43:25 UTC | Merge tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The highlight this cycle is continuing integration fixes for PowerPC and some resulting optimizations. Summary: - Updates to better support vmalloc space restrictions on PowerPC platforms. - Cleanups to move common sysfs attributes to core 'struct device_type' objects. - Export the 'target_node' attribute (the effective numa node if pmem is marked online) for regions and namespaces. - Miscellaneous fixups and optimizations" * tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) MAINTAINERS: Remove Keith from NVDIMM maintainers libnvdimm: Export the target_node attribute for regions and namespaces dax: Add numa_node to the default device-dax attributes libnvdimm: Simplify root read-only definition for the 'resource' attribute dax: Simplify root read-only definition for the 'resource' attribute dax: Create a dax device_type libnvdimm: Move nvdimm_bus_attribute_group to device_type libnvdimm: Move nvdimm_attribute_group to device_type libnvdimm: Move nd_mapping_attribute_group to device_type libnvdimm: Move nd_region_attribute_group to device_type libnvdimm: Move nd_numa_attribute_group to device_type libnvdimm: Move nd_device_attribute_group to device_type libnvdimm: Move region attribute group definition libnvdimm: Move attribute groups to device type libnvdimm: Remove prototypes for nonexistent functions libnvdimm/btt: fix variable 'rc' set but not used libnvdimm/pmem: Delete include of nd-core.h libnvdimm/namespace: Differentiate between probe mapping and runtime mapping libnvdimm/pfn_dev: Don't clear device memmap area during generic namespace probe libnvdimm: Trivial comment fix ... | 02 December 2019, 02:43:25 UTC |
| 43fd4bd | Linus Torvalds | 02 December 2019, 02:42:02 UTC | Merge tag 'mailbox-v5.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - omap : misc - catch error returned from pm_runtime_put_sync - hisi : misc - drop .owner from platform_driver - stm : change how wakeup is handled - imx : fix - bailout on error and nuke correct irq - imx : add support for imx7ulp platform * tag 'mailbox-v5.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: imx: add support for imx v1 mu dt-bindings: mailbox: imx-mu: add imx7ulp MU support mailbox: imx: Clear the right interrupts at shutdown mailbox: imx: Fix Tx doorbell shutdown path mailbox: stm32-ipcc: Update wakeup management mailbox: no need to set .owner platform_driver_register mailbox/omap: Handle if CONFIG_PM is disabled | 02 December 2019, 02:42:02 UTC |
| 454d9c4 | Linus Torvalds | 02 December 2019, 02:40:28 UTC | Merge tag 'hwlock-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull hwspinlock updates from Bjorn Andersson: "This contains a number of cleanups to the core and several drivers, in particular removing the requirement for drivers to implement pm_runtime. It also udpates the location of the git tree in MAINTAINERS" * tag 'hwlock-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: hwspinlock: u8500_hsem: Remove redundant PM runtime implementation hwspinlock: sprd: Remove redundant PM runtime implementation hwspinlock: Let the PM runtime can be optional hwspinlock: Remove BUG_ON() from the hwspinlock core hwspinlock: sprd: Use devm_hwspin_lock_register() to register hwlock controller hwspinlock: sprd: Use devm_add_action_or_reset() for calls to clk_disable_unprepare() hwspinlock: sprd: Check the return value of clk_prepare_enable() hwspinlock: sprd: Change to use devm_platform_ioremap_resource() hwspinlock: u8500_hsem: Use devm_hwspin_lock_register() to register hwlock controller hwspinlock: u8500_hsem: Use devm_kzalloc() to allocate memory hwspinlock: u8500_hsem: Change to use devm_platform_ioremap_resource() MAINTAINERS: hwspinlock: update git tree location | 02 December 2019, 02:40:28 UTC |
| 687fcad | Linus Torvalds | 02 December 2019, 02:39:24 UTC | Merge tag 'rpmsg-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This contains a number of bug fixes to the GLINK transport driver, an off-by-one in the GLINK smem driver and a memory leak fix in the rpmsg char driver" * tag 'rpmsg-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: Fix Kconfig indentation rpmsg: char: Simplify 'rpmsg_eptdev_release()' rpmsg: glink: Free pending deferred work on remove rpmsg: glink: Don't send pending rx_done during remove rpmsg: glink: Fix rpmsg_register_device err handling rpmsg: glink: Put an extra reference during cleanup rpmsg: glink: Fix use after free in open_ack TIMEOUT case rpmsg: glink: Fix reuse intents memory leak issue rpmsg: glink: Set tail pointer to 0 at end of FIFO rpmsg: char: release allocated memory | 02 December 2019, 02:39:24 UTC |
| 5e3b06d | Linus Torvalds | 02 December 2019, 02:35:47 UTC | Merge tag 'rproc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This adds support for booting the modem processor on Qualcomm MSM8998 and carries some cleanup up and bug fixes to the framework and the stm32 driver" * tag 'rproc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: Revert "dt-bindings: remoteproc: stm32: add wakeup-source" remoteproc: stm32: fix probe error case remoteproc: stm32: wakeup the system by wdg irq dt-bindings: remoteproc: stm32: add wakeup-source remoteproc: Fix wrong rvring index computation remoteproc: stm32: use workqueue to treat mailbox callback remoteproc: fix argument 2 of rproc_mem_entry_init remoteproc: qcom_q6v5_mss: Add support for MSM8998 dt-bindings: remoteproc: qcom: Add Q6v5 Modem PIL binding for MSM8998 remoteproc: debug: Remove unneeded NULL check remoteproc: remove useless typedef | 02 December 2019, 02:35:47 UTC |
| 3265568 | Linus Torvalds | 02 December 2019, 02:29:36 UTC | Merge branch 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has mostly driver updates this time. The few noteworthy changes are: the core has now support for analog and digital filters with at91 being the first user, a core addition to replace the NULL returning i2c_new_probed_device() with an ERR_PTR variant, and the pxa driver has finally being moved to use the generic I2C slave interface. We have quite a significant number of reviews per patch this time, so thank you to all involved!" * 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) video: fbdev: matrox: convert to i2c_new_scanned_device i2c: icy: convert to i2c_new_scanned_device i2c: replace i2c_new_probed_device with an ERR_PTR variant i2c: Fix Kconfig indentation i2c: smbus: Don't filter out duplicate alerts i2c: i801: Correct Intel Jasper Lake SOC naming i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop i2c: iproc: Add i2c repeated start capability i2c: remove helpers for ref-counting clients i2c: tegra: Use dma_request_chan() directly for channel request i2c: sh_mobile: Use dma_request_chan() directly for channel request i2c: qup: Use dma_request_chan() directly for channel request i2c: at91: Use dma_request_chan() directly for channel request i2c: rcar: Remove superfluous call to clk_get_rate() i2c: pxa: remove unused i2c-slave APIs i2c: pxa: migrate to new i2c_slave APIs i2c: cros-ec-tunnel: Make the device acpi compatible i2c: stm32f7: report dma error during probe i2c: icy: no need to populate address for scanned device i2c: xiic: Fix kerneldoc warnings ... | 02 December 2019, 02:29:36 UTC |
| 31764f1 | Linus Torvalds | 02 December 2019, 02:26:56 UTC | Merge tag 'for-linus-20191129' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "I wasn't going to send this one off so soon, but unfortunately one of the fixes from the previous pull broke the build on some archs. So I'm sending this sooner rather than later. This contains: - Add highmem.h include for io_uring, because of the kmap() additions from last round. For some reason the build bot didn't spot this even though it sat for days. - Three minor ';' removals - Add support for the Beurer CD-on-a-chip device - Make io_uring work on MMU-less archs" * tag 'for-linus-20191129' of git://git.kernel.dk/linux-block: io_uring: fix missing kmap() declaration on powerpc ataflop: Remove unneeded semicolon block: sunvdc: Remove unneeded semicolon drbd: Remove unneeded semicolon io_uring: add mapping support for NOMMU archs sr_vendor: support Beurer GL50 evo CD-on-a-chip devices. cdrom: respect device capabilities during opening action | 02 December 2019, 02:26:56 UTC |
| 67b8ed2 | Linus Torvalds | 02 December 2019, 02:24:25 UTC | Merge tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - New bootctl driver for Mellanox BlueField SoC. - New driver to support System76 laptops. - Temperature monitoring and fan control on Acer Aspire 7551 is now supported. - Previously the Huawei driver handled only hotkeys. After the conversion to WMI it has been expanded to support newer laptop models. - Big refactoring of intel-speed-select tools allows to use it on Intel CascadeLake-N systems. - Touchscreen support for ezpad 6 m4 and Schneider SCT101CTM tablets - Miscellaneous clean ups and fixes here and there. * tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86: (59 commits) platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver platform/x86: intel_pmc_core: Fix the SoC naming inconsistency platform/mellanox: Fix Kconfig indentation tools/power/x86/intel-speed-select: Display TRL buckets for just base config level tools/power/x86/intel-speed-select: Ignore missing config level platform/x86: touchscreen_dmi: Add info for the ezpad 6 m4 tablet tools/power/x86/intel-speed-select: Increment version tools/power/x86/intel-speed-select: Use core count for base-freq mask tools/power/x86/intel-speed-select: Support platform with limited Intel(R) Speed Select tools/power/x86/intel-speed-select: Use Frequency weight for CLOS tools/power/x86/intel-speed-select: Make CLOS frequency in MHz tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG tools/power/x86/intel-speed-select: Auto mode for CLX tools/power/x86/intel-speed-select: Correct CLX-N frequency units tools/power/x86/intel-speed-select: Change display of "avx" to "avx2" tools/power/x86/intel-speed-select: Extend command set for perf-profile Add touchscreen platform data for the Schneider SCT101CTM tablet platform/x86: intel_int0002_vgpio: Pass irqchip when adding gpiochip ... | 02 December 2019, 02:24:25 UTC |
| d004701 | Linus Torvalds | 02 December 2019, 02:20:54 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - Support for Logitech G15 (Hans de Goede) - HID parser improvements, improving support for some devices; e.g. Windows Precision Touchpad, products from Primax, etc. (Blaž Hrastnik, Candle Sun) - robustification of tablet mode support in google-whiskers driver (Dmitry Torokhov) - assorted small fixes, device-specific quirks and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (23 commits) HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device HID: quirks: remove hid-led devices from hid_have_special_driver HID: Improve Windows Precision Touchpad detection. HID: i2c-hid: Reset ALPS touchpads on resume HID: i2c-hid: fix no irq after reset on raydium 3118 HID: logitech-hidpp: Silence intermittent get_battery_capacity errors HID: i2c-hid: remove orphaned member sleep_delay HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse HID: core: check whether Usage Page item is after Usage ID items HID: intel-ish-hid: Spelling s/diconnect/disconnect/ HID: google: Detect base folded usage instead of hard-coding whiskers HID: logitech: Add depends on LEDS_CLASS to Logitech Kconfig entry HID: lg-g15: Add support for the G510's M1-M3 and MR LEDs HID: lg-g15: Add support for controlling the G510's RGB backlight HID: lg-g15: Add support for the G510 keyboards' gaming keys HID: lg-g15: Add support for the M1-M3 and MR LEDs HID: lg-g15: Add keyboard and LCD backlight control HID: Add driver for Logitech gaming keyboards (G15, G15 v2) Input: Add event-codes for macro keys found on various keyboards HID: hidraw: replace printk() with corresponding pr_xx() variant ... | 02 December 2019, 02:20:54 UTC |
| 4a08fe5 | Linus Torvalds | 02 December 2019, 02:01:03 UTC | Merge tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - support for NCT6116D - several small fixes and improvements * tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits) watchdog: jz4740: Drop dependency on MACH_JZ47xx watchdog: jz4740: Use regmap provided by TCU driver watchdog: jz4740: Use WDT clock provided by TCU driver dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible watchdog: sama5d4_wdt: cleanup the bit definitions watchdog: sprd: Fix the incorrect pointer getting from driver data watchdog: aspeed: Fix clock behaviour for ast2600 watchdog: imx7ulp: Fix reboot hang watchdog: make nowayout sysfs file writable watchdog: prevent deferral of watchdogd wakeup on RT watchdog: imx7ulp: Use definitions instead of magic values watchdog: imx7ulp: Remove inline annotations watchdog: imx7ulp: Remove unused structure member watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable() watchdog: wdat_wdt: Spelling s/configrable/configurable/ watchdog: bd70528: Trivial function documentation fix watchdog: cadence: Do not show error in case of deferred probe watchdog: Fix the race between the release of watchdog_core_data and cdev watchdog: sbc7240_wdt: Fix yet another -Wimplicit-fallthrough warning watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support ... | 02 December 2019, 02:01:03 UTC |
| 99a0d9f | Linus Torvalds | 02 December 2019, 01:56:50 UTC | Merge tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.5 kernel cycle Core changes: - Expose pull up/down flags for the GPIO character device to userspace. After clear input from the RaspberryPi and Beagle communities, it has been established that prototyping, industrial automation and make communities strongly need this feature, and as we want people to use the character device, we have implemented the simple pull up/down interface for GPIO lines. This means we can specify that a (chip-specific) pull up/down resistor can be enabled, but does not offer fine-grained control such as cases where the resistance of the same pull resistor can be controlled (yet). - Introduce devm_fwnode_gpiod_get_index() and start to phase out the old symbol devm_fwnode_get_index_gpiod_from_child(). - A bit of documentation clean-up work. - Introduce a define for GPIO line directions and deploy it in all GPIO drivers in the drivers/gpio directory. - Add a special callback to populate pin ranges when cooperating with the pin control subsystem and registering ranges as part of adding a gpiolib driver and a gpio_irq_chip driver at the same time. This is also deployed in the Intel Merrifield driver. New drivers: - RDA Micro GPIO controller. - XGS-iproc GPIO driver. Driver improvements: - Wake event and debounce support on the Tegra 186 driver. - Finalize the Aspeed SGPIO driver. - MPC8xxx uses a normal IRQ handler rather than a chained handler" * tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (64 commits) gpio: Add TODO item for regmap helper Documentation: gpio: driver.rst: Fix warnings gpio: of: Fix bogus reference to gpiod_get_count() gpiolib: Grammar s/manager/managed/ gpio: lynxpoint: Setup correct IRQ handlers MAINTAINERS: Replace my email by one @kernel.org gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK gpio/mpc8xxx: fix qoriq GPIO reading gpio: mpc8xxx: Don't overwrite default irq_set_type callback gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors gpiolib: fix coding style in gpiod_hog() drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index() gpio: merrifield: Pass irqchip when adding gpiochip gpio: merrifield: Add GPIO <-> pin mapping ranges via callback gpiolib: Introduce ->add_pin_ranges() callback gpio: mmio: remove untrue leftover comment gpio: em: Use platform_get_irq() to obtain interrupts gpio: tegra186: Add debounce support gpio: tegra186: Program interrupt route mapping gpio: tegra186: Derive register offsets from bank/port ... | 02 December 2019, 01:56:50 UTC |
| 3732391 | Linus Torvalds | 02 December 2019, 00:16:31 UTC | Merge tag 'mfd-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Add support for a "resource managed strongly uncachable ioremap" call - Provide a collection of MFD helper macros - Remove mfd_clone_cell() from MFD core - Add NULL de-reference protection in MFD core - Remove superfluous function fd_platform_add_cell() from MFD core - Honour Device Tree's request to disable a device New Drivers: - Add support for MediaTek MT6323 PMIC New Device Support: - Add support for Gemini Lake to Intel LPSS PCI - Add support for Cherry Trail Crystal Cover PMIC to Intel SoC PMIC CRC - Add support for PM{I}8950 to Qualcomm SPMI PMIC - Add support for U8420 to ST-Ericsson DB8500 - Add support for Comet Lake PCH-H to Intel LPSS PCI New Functionality: - Add support for requested supply clocks; madera-core Fix-ups: - Lower interrupt priority; rk808 - Use provided helpers (macros, group functions, defines); rk808, ipaq-micro, ab8500-core, db8500-prcmu, mt6397-core, cs5535-mfd - Only allocate IRQs on request; max77620 - Use simplified API; arizona-core - Remove redundant and/or duplicated code; wm8998-tables, arizona, syscon - Device Tree binding fix-ups; madera, max77650, max77693 - Remove mfd_cell->id abuse hack; cs5535-mfd - Remove only user of mfd_clone_cell(); cs5535-mfd - Make resources static; rohm-bd70528 Bug Fixes: - Fix product ID for RK818; rk808 - Fix Power Key; rk808 - Fix booting on the BananaPi; mt6397-core - Endian fix-ups; twl.h - Fix static error checker warnings; ti_am335x_tscadc" * tag 'mfd-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (47 commits) Revert "mfd: syscon: Set name of regmap_config" mfd: ti_am335x_tscadc: Fix static checker warning mfd: bd70528: Staticize bit value definitions mfd: mfd-core: Honour Device Tree's request to disable a child-device dt-bindings: mfd: max77693: Fix missing curly brace mfd: intel-lpss: Add Intel Comet Lake PCH-H PCI IDs mfd: db8500-prcmu: Support U8420-sysclk firmware dt-bindings: mfd: max77650: Convert the binding document to yaml mfd: mfd-core: Move pdev->mfd_cell creation back into mfd_add_device() mfd: mfd-core: Remove usage counting for .{en,dis}able() call-backs x86: olpc-xo1-sci: Remove invocation of MFD's .enable()/.disable() call-backs x86: olpc-xo1-pm: Remove invocation of MFD's .enable()/.disable() call-backs mfd: mfd-core: Remove mfd_clone_cell() mfd: mfd-core: Protect against NULL call-back function pointer mfd: cs5535-mfd: Register clients using their own dedicated MFD cell entries mfd: cs5535-mfd: Request shared IO regions centrally mfd: cs5535-mfd: Remove mfd_cell->id hack mfd: cs5535-mfd: Use PLATFORM_DEVID_* defines and tidy error message mfd: intel_soc_pmic_crc: Add "cht_crystal_cove_pmic" cell to CHT cells mfd: madera: Add support for requesting the supply clocks ... | 02 December 2019, 00:16:31 UTC |
| 38edc3d | Linus Torvalds | 02 December 2019, 00:13:39 UTC | Merge tag 'backlight-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Functionality: - Add support for an enable GPIO; lm3630a_bl - Add support for short circuit handling; qcom-wled - Add support for automatic string detection; qcom-wled Fix-ups: - Update Device Tree bindings; lm3630a-backlight, led-backlight, qcom-wled - Constify; ipaq_micro_bl - Optimise for CPU cycles; pwm_bl - Coding style fix-ups; pwm_bl - Trivial fix-ups (white space, comments, renaming); pwm_bl, gpio_backlight, qcom-wled - Kconfig dependency hacking; LCD_HP700 - Rename, refactor and add peripherals; pm8941-wled => qcom-wled - Make use of GPIO look-up tables; tosa_bl, tosa_lcd - Remove superfluous code; gpio_backlight - Adapt GPIO direction handling; gpio_backlight - Remove legacy use of platform data; gpio_backlight Bug Fixes: - Provide modules aliases; lm3630a_bl" * tag 'backlight-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits) backlight: qcom-wled: Fix spelling mistake "trigged" -> "triggered" backlight: gpio: Pull gpio_backlight_initial_power_state() into probe backlight: gpio: Use a helper variable for &pdev->dev backlight: gpio: Remove unused fields from platform data sh: ecovec24: don't set unused fields in platform data backlight: gpio: Simplify the platform data handling sh: ecovec24: add additional properties to the backlight device backlight: gpio: Explicitly set the direction of the GPIO backlight: gpio: Remove stray newline backlight: gpio: Remove unneeded include video: backlight: tosa: Use GPIO lookup table backlight: qcom-wled: Add auto string detection logic backlight: qcom-wled: Add support for short circuit handling backlight: qcom-wled: Add support for WLED4 peripheral backlight: qcom-wled: Restructure the driver for WLED3 backlight: qcom-wled: Rename PM8941* to WLED3 backlight: qcom-wled: Add new properties for PMI8998 backlight: qcom-wled: Restructure the qcom-wled bindings backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c dt-bindings: backlight: lm3630a: Fix missing include ... | 02 December 2019, 00:13:39 UTC |
| 8b233da | Linus Torvalds | 02 December 2019, 00:12:21 UTC | Merge tag 'pinctrl-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fix from Linus Walleij: "A oneliner fix adding the license to the new Intel pin controller, avoiding a build-time warning" * tag 'pinctrl-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: Fix warning by adding missing MODULE_LICENSE | 02 December 2019, 00:12:21 UTC |
| 304220b | Linus Torvalds | 02 December 2019, 00:09:28 UTC | Merge tag 'leds-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "This contains usual small updates to drivers, and removal of PAGE_SIZE limits on /sys/class/leds/<led>/trigger. We should not be really having that many triggers; but with cpu activity triggers we do, and we'll eventually need to fix it, but... remove the limit for now" * tag 'leds-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (26 commits) leds: trigger: netdev: fix handling on interface rename leds: an30259a: add a check for devm_regmap_init_i2c leds: mlxreg: Fix possible buffer overflow leds: pca953x: Use of_device_get_match_data() leds: core: Fix leds.h structure documentation leds: core: Fix devm_classdev_match to reference correct structure leds: core: Remove extern from header leds: lm3601x: Convert class registration to device managed leds: flash: Add devm_* functions to the flash class leds: flash: Remove extern from the header file leds: flash: Convert non extended registration to inline leds: Kconfig: Be consistent with the usage of "LED" leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger leds: tlc591xx: update the maximum brightness leds: lm3692x: Use flags from LM3692X_BRT_CTRL leds: lm3692x: Use flags from LM3692X_BOOST_CTRL leds: lm3692x: Handle failure to probe the regulator leds: lm3692x: Don't overwrite return value in error path leds: lm3692x: Print error value on dev_err leds: tlc591xx: use devm_led_classdev_register_ext() ... | 02 December 2019, 00:09:28 UTC |
| ddebe83 | Linus Torvalds | 02 December 2019, 00:06:02 UTC | Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This merge window we have one small clk provider API in the core framework and then a bunch of driver updates and a handful of new drivers. In terms of diffstat the Qualcomm and Amlogic drivers are high up there because of all the clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work done this cycle too to support suspend/resume and memory controllers. And the OMAP clk driver got proper clk and reset handling in place. Rounding out the patches are various updates to remove unused data, mark things static, correct incorrect data in drivers, etc. All the little things that improve drivers and maintain code health. I will point out that there's a patch in here for the GPIO clk driver, that almost nobody uses, which changes behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent. Other than that things are fairly well SoC specific here. Core: - Add a clk provider API to get current parent index - Plug a memory leak in clk_unregister() path New Drivers: - CGU in Ingenix X1000 - Bitmain BM1880 clks - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC - Add support for the Renesas RZ/G2N (r8a774b1) SoC - Add Tegra20/30 External Memory Clock (EMC) support Updates: - Make gpio gate clks propagate rate setting up to parent - Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() - Use struct_size() some more in various clk drivers - Improve Rockchip px30 clk tree - Add suspend/resume support to Tegra210 clk driver - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP - Allwinner DT exports and H6 clk tree fixes - Proper clk and reset handling for OMAP SoCs - Revamped TI divider clk to clamp max divider - Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used - Add VIDEO2_PLL clock for imx8mq - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs - Add sm1 support in the Amlogic audio clock controller - Switch some clocks on R-Car Gen2/3 to .determine_rate() - Remove Renesas R-Car Gen2 legacy DT clock support - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3 - Improve Renesas R-Car Gen3 SD clock handling - Add rate table for Samsung exynos542x GPU and VPLL clks - Fix potential CPU performance degradation after system suspend/resume cycle on exynos542x SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits) clk: aspeed: Add RMII RCLK gates for both AST2500 MACs MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers clk: ingenic: Allow drivers to be built with COMPILE_TEST MAINTAINERS: Update section for Ux500 clock drivers clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. clk: tegra: Use match_string() helper to simplify the code clk: pxa: fix one of the pxa RTC clocks clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() clk: armada-xp: remove unused code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 ... | 02 December 2019, 00:06:02 UTC |
| ceb3074 | Linus Torvalds | 01 December 2019, 22:00:59 UTC | Merge tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 cleanups from Arnd Bergmann: "y2038 syscall implementation cleanups This is a series of cleanups for the y2038 work, mostly intended for namespace cleaning: the kernel defines the traditional time_t, timeval and timespec types that often lead to y2038-unsafe code. Even though the unsafe usage is mostly gone from the kernel, having the types and associated functions around means that we can still grow new users, and that we may be missing conversions to safe types that actually matter. There are still a number of driver specific patches needed to get the last users of these types removed, those have been submitted to the respective maintainers" Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/ * tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (26 commits) y2038: alarm: fix half-second cut-off y2038: ipc: fix x32 ABI breakage y2038: fix typo in powerpc vdso "LOPART" y2038: allow disabling time32 system calls y2038: itimer: change implementation to timespec64 y2038: move itimer reset into itimer.c y2038: use compat_{get,set}_itimer on alpha y2038: itimer: compat handling to itimer.c y2038: time: avoid timespec usage in settimeofday() y2038: timerfd: Use timespec64 internally y2038: elfcore: Use __kernel_old_timeval for process times y2038: make ns_to_compat_timeval use __kernel_old_timeval y2038: socket: use __kernel_old_timespec instead of timespec y2038: socket: remove timespec reference in timestamping y2038: syscalls: change remaining timeval to __kernel_old_timeval y2038: rusage: use __kernel_old_timeval y2038: uapi: change __kernel_time_t to __kernel_old_time_t y2038: stat: avoid 'time_t' in 'struct stat' y2038: ipc: remove __kernel_time_t reference from headers y2038: vdso: powerpc: avoid timespec references ... | 01 December 2019, 22:00:59 UTC |
| 0da5221 | Linus Torvalds | 01 December 2019, 21:46:15 UTC | Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ... | 01 December 2019, 21:46:15 UTC |
| ad0b314 | Linus Torvalds | 01 December 2019, 21:26:18 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull sysctl system call removal from Eric Biederman: "As far as I can tell we have reached the point where no one enables the sysctl system call anymore. It still is enabled in a few defconfigs but they are mostly the rarely used one and in asking people about that it was more cut & paste enabled than anything else. This is single commit that just deletes code. Leaving just enough code so that the deprecated sysctl warning continues to be printed. If my analysis turns out to be wrong and someone actually cares it will be easy to revert this commit and have the system call again. There was one new xtensa defconfig in linux-next that enabled the system call this cycle and when asked about it the maintainer of the code replied that it was not enabled on purpose. As of today's linux-next tree that defconfig no longer enables the system call. What we saw in the review discussion was that if we go a step farther than my patch and mess with uapi headers there are pieces of code that won't compile, but nothing minds the system call actually disappearing from the kernel" Link: https://lore.kernel.org/lkml/201910011140.EA0181F13@keescook/ * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sysctl: Remove the sysctl system call | 01 December 2019, 21:26:18 UTC |
| c6c6bc6 | Richard Zhu | 09 October 2019, 08:07:21 UTC | mailbox: imx: add support for imx v1 mu There is a version 1.0 MU on i.MX7ULP platform. One new version ID register is added, and it's offset is 0. TRn registers are defined at the offset 0x20 ~ 0x2C. RRn registers are defined at the offset 0x40 ~ 0x4C. SR/CR registers are defined at 0x60/0x64. Extend this driver to support it. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 01 December 2019, 05:09:14 UTC |
| 58340e7 | Richard Zhu | 09 October 2019, 08:07:20 UTC | dt-bindings: mailbox: imx-mu: add imx7ulp MU support There is a version 1.0 MU on imx7ulp, use "fsl,imx7ulp-mu" compatible to support it. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 01 December 2019, 05:09:12 UTC |
| 5f0af07 | Daniel Baluta | 09 October 2019, 08:07:19 UTC | mailbox: imx: Clear the right interrupts at shutdown Make sure to only clear enabled interrupts keeping count of the connection type. Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 01 December 2019, 05:09:10 UTC |
| bf159d1 | Daniel Baluta | 09 October 2019, 08:07:18 UTC | mailbox: imx: Fix Tx doorbell shutdown path Tx doorbell is handled by txdb_tasklet and doesn't have an associated IRQ. Anyhow, imx_mu_shutdown ignores this and tries to free an IRQ that wasn't requested for Tx DB resulting in the following warning: [ 1.967644] Trying to free already-free IRQ 26 [ 1.972108] WARNING: CPU: 2 PID: 157 at kernel/irq/manage.c:1708 __free_irq+0xc0/0x358 [ 1.980024] Modules linked in: [ 1.983088] CPU: 2 PID: 157 Comm: kworker/2:1 Tainted: G [ 1.993524] Hardware name: Freescale i.MX8QXP MEK (DT) [ 1.998668] Workqueue: events deferred_probe_work_func [ 2.003812] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 2.008607] pc : __free_irq+0xc0/0x358 [ 2.012364] lr : __free_irq+0xc0/0x358 [ 2.016111] sp : ffff00001179b7e0 [ 2.019422] x29: ffff00001179b7e0 x28: 0000000000000018 [ 2.024736] x27: ffff000011233000 x26: 0000000000000004 [ 2.030053] x25: 000000000000001a x24: ffff80083bec74d4 [ 2.035369] x23: 0000000000000000 x22: ffff80083bec7588 [ 2.040686] x21: ffff80083b1fe8d8 x20: ffff80083bec7400 [ 2.046003] x19: 0000000000000000 x18: ffffffffffffffff [ 2.051320] x17: 0000000000000000 x16: 0000000000000000 [ 2.056637] x15: ffff0000111296c8 x14: ffff00009179b517 [ 2.061953] x13: ffff00001179b525 x12: ffff000011142000 [ 2.067270] x11: ffff000011129f20 x10: ffff0000105da970 [ 2.072587] x9 : 00000000ffffffd0 x8 : 0000000000000194 [ 2.077903] x7 : 612065657266206f x6 : ffff0000111e7b09 [ 2.083220] x5 : 0000000000000003 x4 : 0000000000000000 [ 2.088537] x3 : 0000000000000000 x2 : 00000000ffffffff [ 2.093854] x1 : 28b70f0a2b60a500 x0 : 0000000000000000 [ 2.099173] Call trace: [ 2.101618] __free_irq+0xc0/0x358 [ 2.105021] free_irq+0x38/0x98 [ 2.108170] imx_mu_shutdown+0x90/0xb0 [ 2.111921] mbox_free_channel.part.2+0x24/0xb8 [ 2.116453] mbox_free_channel+0x18/0x28 This bug is present from the beginning of times. Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 01 December 2019, 05:09:07 UTC |
| 6926944 | Fabien Dessenne | 30 October 2019, 13:57:01 UTC | mailbox: stm32-ipcc: Update wakeup management The wakeup specific IRQ management is no more needed to wake up the stm32 platform. A relationship has been established between the EXTI and the RX IRQ, just need to declare the EXTI interrupt instead of the IPCC RX IRQ. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> | 01 December 2019, 05:08:59 UTC |
| b94ae8a | Linus Torvalds | 01 December 2019, 01:23:16 UTC | Merge tag 'seccomp-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "Mostly this is implementing the new flag SECCOMP_USER_NOTIF_FLAG_CONTINUE, but there are cleanups as well. - implement SECCOMP_USER_NOTIF_FLAG_CONTINUE (Christian Brauner) - fixes to selftests (Christian Brauner) - remove secure_computing() argument (Christian Brauner)" * tag 'seccomp-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: rework define for SECCOMP_USER_NOTIF_FLAG_CONTINUE seccomp: fix SECCOMP_USER_NOTIF_FLAG_CONTINUE test seccomp: simplify secure_computing() seccomp: test SECCOMP_USER_NOTIF_FLAG_CONTINUE seccomp: add SECCOMP_USER_NOTIF_FLAG_CONTINUE seccomp: avoid overflow in implicit constant conversion | 01 December 2019, 01:23:16 UTC |
| 3b805ca | Linus Torvalds | 01 December 2019, 01:01:48 UTC | Merge tag 'audit-pr-20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Audit is back for v5.5, albeit with only two patches: - Allow for the auditing of suspicious O_CREAT usage via the new AUDIT_ANOM_CREAT record. - Remove a redundant if-conditional check found during code analysis. It's a minor change, but when the pull request is only two patches long, you need filler in the pull request email" [ Heh on the pull request filler. I wish more people tried to write better pull request messages, even if maybe it's not worth it for the trivial cases ;^) - Linus ] * tag 'audit-pr-20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: remove redundant condition check in kauditd_thread() audit: Report suspicious O_CREAT usage | 01 December 2019, 01:01:48 UTC |
| ba75082 | Linus Torvalds | 01 December 2019, 00:55:37 UTC | Merge tag 'selinux-pr-20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "Only three SELinux patches for v5.5: - Remove the size limit on SELinux policies, the limitation was a lingering vestige and no longer necessary. - Allow file labeling before the policy is loaded. This should ease some of the burden when the policy is initially loaded (no need to relabel files), but it should also help enable some new system concepts which dynamically create the root filesystem in the initrd. - Add support for the "greatest lower bound" policy construct which is defined as the intersection of the MLS range of two SELinux labels" * tag 'selinux-pr-20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: default_range glblub implementation selinux: allow labeling before policy is loaded selinux: remove load size limit | 01 December 2019, 00:55:37 UTC |
| 8a99117 | Linus Torvalds | 01 December 2019, 00:41:55 UTC | Merge tag 'kgdb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "The major change here is the work from Douglas Anderson that reworks the way kdb stack traces are handled on SMP systems. The effect is to allow all CPUs to issue their stack trace which reduced the need for architecture specific code to support stack tracing. Also included are general of clean ups from Doug and myself: - Remove some unused variables or arguments. - Tidy up the kdb escape handling code and fix a couple of odd corner cases. - Better ignore escape characters that do not form part of an escape sequence. This mostly benefits vi users since they are most likely to press escape as a nervous habit but it won't harm anyone else" * tag 'kgdb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: Tweak escape handling for vi users kdb: Improve handling of characters from different input sources kdb: Remove special case logic from kdb_read() kdb: Simplify code to fetch characters from console kdb: Tidy up code to handle escape sequences kdb: Avoid array subscript warnings on non-SMP builds kdb: Fix stack crawling on 'running' CPUs that aren't the master kdb: Fix "btc <cpu>" crash if the CPU didn't round up kdb: Remove unused "argcount" param from kdb_bt1(); make btaprompt bool kgdb: Remove unused DCPU_SSTEP definition | 01 December 2019, 00:41:55 UTC |
| 0dd0c8f | Linus Torvalds | 30 November 2019, 22:50:51 UTC | Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Sasha Levin: - support for new VMBus protocols (Andrea Parri) - hibernation support (Dexuan Cui) - latency testing framework (Branden Bonaby) - decoupling Hyper-V page size from guest page size (Himadri Pandya) * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic drivers/hv: Replace binary semaphore with mutex drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86 HID: hyperv: Add the support of hibernation hv_balloon: Add the support of hibernation x86/hyperv: Implement hv_is_hibernation_supported() Drivers: hv: balloon: Remove dependencies on guest page size Drivers: hv: vmbus: Remove dependencies on guest page size x86: hv: Add function to allocate zeroed page for Hyper-V Drivers: hv: util: Specify ring buffer size using Hyper-V page size Drivers: hv: Specify receive buffer size using Hyper-V page size tools: hv: add vmbus testing tool drivers: hv: vmbus: Introduce latency testing video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host hv_netvsc: Add the support of hibernation hv_sock: Add the support of hibernation video: hyperv_fb: Add the support of hibernation scsi: storvsc: Add the support of hibernation Drivers: hv: vmbus: Add module parameter to cap the VMBus version ... | 30 November 2019, 22:50:51 UTC |
| 8fa91bf | Linus Torvalds | 30 November 2019, 22:49:08 UTC | Merge branch 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fix from Borislav Petkov: "One urgent fix for the thermal throttling machinery: the recent change reworking the thermal notifications forgot to mask out read-only and reserved bits in the thermal status MSRs, leading to exceptions while writing those MSRs. The fix takes care of masking out those bits first" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/therm_throt: Mask out read-only and reserved MSR bits | 30 November 2019, 22:49:08 UTC |
| 738d5fa | Linus Torvalds | 30 November 2019, 22:45:32 UTC | Merge branch 'parisc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Just trivial small updates: An assembler register optimization in the inlined networking checksum functions, a compiler warning fix and don't unneccesary print a runtime warning on machines which wouldn't be affected anyway" * 'parisc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Avoid spurious inequivalent alias kernel error messages kexec: Fix pointer-to-int-cast warnings parisc: Do not hardcode registers in checksum functions | 30 November 2019, 22:45:32 UTC |
| 7794b1d | Linus Torvalds | 30 November 2019, 22:35:43 UTC | Merge tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Infrastructure for secure boot on some bare metal Power9 machines. The firmware support is still in development, so the code here won't actually activate secure boot on any existing systems. - A change to xmon (our crash handler / pseudo-debugger) to restrict it to read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop into xmon and modify kernel data, such as the lockdown state. - Support for KASLR on 32-bit BookE machines (Freescale / NXP). - Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work with memory ranges >4GB. - Some reworks of the pseries CMM (Cooperative Memory Management) driver to make it behave more like other balloon drivers and enable some cleanups of generic mm code. - A series of fixes to our hardware breakpoint support to properly handle unaligned watchpoint addresses. Plus a bunch of other smaller improvements, fixes and cleanups. Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing" * tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits) powerpc/fixmap: fix crash with HIGHMEM x86/efi: remove unused variables powerpc: Define arch_is_kernel_initmem_freed() for lockdep powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp powerpc: Avoid clang warnings around setjmp and longjmp powerpc: Don't add -mabi= flags when building with Clang powerpc: Fix Kconfig indentation powerpc/fixmap: don't clear fixmap area in paging_init() selftests/powerpc: spectre_v2 test must be built 64-bit powerpc/powernv: Disable native PCIe port management powerpc/kexec: Move kexec files into a dedicated subdir. powerpc/32: Split kexec low level code out of misc_32.S powerpc/sysdev: drop simple gpio powerpc/83xx: map IMMR with a BAT. powerpc/32s: automatically allocate BAT in setbat() powerpc/ioremap: warn on early use of ioremap() powerpc: Add support for GENERIC_EARLY_IOREMAP powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt() powerpc/8xx: use the fixmapped IMMR in cpm_reset() powerpc/8xx: add __init to cpm1 init functions ... | 30 November 2019, 22:35:43 UTC |
| 9dd0013 | Linus Torvalds | 30 November 2019, 22:29:19 UTC | Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - improve ARM implementation of pfn_valid() - various sparse fixes - spelling fixes - add further ARMv8 debug architecture versions - clang fix for decompressor - update to generic vDSO - remove Brahma-B53 from spectre hardening - initialise broadcast hrtimer device - use correct nm executable in decompressor - remove old mcount et.al. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (26 commits) ARM: 8940/1: ftrace: remove mcount(),ftrace_caller_old() and ftrace_call_old() ARM: 8939/1: kbuild: use correct nm executable ARM: 8938/1: kernel: initialize broadcast hrtimer based clock event device ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardening ARM: 8933/1: replace Sun/Solaris style flag on section directive ARM: 8932/1: Add clock_gettime64 entry point ARM: 8931/1: Add clock_getres entry point ARM: 8930/1: Add support for generic vDSO ARM: 8929/1: use APSR_nzcv instead of r15 as mrc operand ARM: 8927/1: ARM/hw_breakpoint: add more ARMv8 debug architecture versions support ARM: 8918/2: only build return_address() if needed ARM: 8928/1: ARM_ERRATA_775420: Spelling s/date/data/ ARM: 8925/1: tcm: include <asm/tcm.h> for missing declarations ARM: 8924/1: tcm: make dtcm_end and itcm_end static ARM: 8923/1: mm: include <asm/vga.h> for vga_base ARM: 8922/1: parse_dt_topology() rate is pointer to __be32 ARM: 8920/1: share get_signal_page from signal.c to process.c ARM: 8919/1: make unexported functions static ARM: 8917/1: mm: include <asm/set_memory.h> ARM: 8916/1: mm: make set_section_perms() static ... | 30 November 2019, 22:29:19 UTC |
| 2309d07 | Linus Torvalds | 30 November 2019, 22:28:11 UTC | Merge tag 'nds32-for-linus-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 updates from Greentime Hu: - code clean up - add a nds32 maintainer * tag 'nds32-for-linus-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: MAINTAINERS: add nds32 maintainer nds32: Move static keyword to the front of declaration nds32: Fix typo in Kconfig.cpu nds32: remove unneeded clean-files for DTB | 30 November 2019, 22:28:11 UTC |
| 6a96566 | Linus Torvalds | 30 November 2019, 22:12:13 UTC | Merge tag 'notifications-pipe-prep-20191115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull pipe rework from David Howells: "This is my set of preparatory patches for building a general notification queue on top of pipes. It makes a number of significant changes: - It removes the nr_exclusive argument from __wake_up_sync_key() as this is always 1. This prepares for the next step: - Adds wake_up_interruptible_sync_poll_locked() so that poll can be woken up from a function that's holding the poll waitqueue spinlock. - Change the pipe buffer ring to be managed in terms of unbounded head and tail indices rather than bounded index and length. This means that reading the pipe only needs to modify one index, not two. - A selection of helper functions are provided to query the state of the pipe buffer, plus a couple to apply updates to the pipe indices. - The pipe ring is allowed to have kernel-reserved slots. This allows many notification messages to be spliced in by the kernel without allowing userspace to pin too many pages if it writes to the same pipe. - Advance the head and tail indices inside the pipe waitqueue lock and use wake_up_interruptible_sync_poll_locked() to poke poll without having to take the lock twice. - Rearrange pipe_write() to preallocate the buffer it is going to write into and then drop the spinlock. This allows kernel notifications to then be added the ring whilst it is filling the buffer it allocated. The read side is stalled because the pipe mutex is still held. - Don't wake up readers on a pipe if there was already data in it when we added more. - Don't wake up writers on a pipe if the ring wasn't full before we removed a buffer" * tag 'notifications-pipe-prep-20191115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: pipe: Remove sync on wake_ups pipe: Increase the writer-wakeup threshold to reduce context-switch count pipe: Check for ring full inside of the spinlock in pipe_write() pipe: Remove redundant wakeup from pipe_write() pipe: Rearrange sequence in pipe_write() to preallocate slot pipe: Conditionalise wakeup in pipe_read() pipe: Advance tail pointer inside of wait spinlock in pipe_read() pipe: Allow pipes to have kernel-reserved slots pipe: Use head and tail pointers for the ring, not cursor and length Add wake_up_interruptible_sync_poll_locked() Remove the nr_exclusive argument from __wake_up_sync_key() pipe: Reduce #inclusion of pipe_fs_i.h | 30 November 2019, 22:12:13 UTC |
| 32ef955 | Linus Torvalds | 30 November 2019, 19:34:33 UTC | Merge tag 'fsnotify_for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "Three fsnotify cleanups" * tag 'fsnotify_for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: Add git tree reference to MAINTAINERS fsnotify/fdinfo: exportfs_encode_inode_fh() takes pointer as 4th argument fsnotify: move declaration of fsnotify_mark_connector_cachep to fsnotify.h | 30 November 2019, 19:34:33 UTC |
| b8072d5 | Linus Torvalds | 30 November 2019, 19:16:07 UTC | Merge tag 'for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2, quota, reiserfs cleanups and fixes from Jan Kara: - Refactor the quota on/off kernel internal interfaces (mostly for ubifs quota support as ubifs does not want to have inodes holding quota information) - A few other small quota fixes and cleanups - Various small ext2 fixes and cleanups - Reiserfs xattr fix and one cleanup * tag 'for_v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (28 commits) ext2: code cleanup for descriptor_loc() fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long ext2: fix improper function comment ext2: code cleanup for ext2_try_to_allocate() ext2: skip unnecessary operations in ext2_try_to_allocate() ext2: Simplify initialization in ext2_try_to_allocate() ext2: code cleanup by calling ext2_group_last_block_no() ext2: introduce new helper ext2_group_last_block_no() reiserfs: replace open-coded atomic_dec_and_mutex_lock() ext2: check err when partial != NULL quota: Handle quotas without quota inodes in dquot_get_state() quota: Make dquot_disable() work without quota inodes quota: Drop dquot_enable() fs: Use dquot_load_quota_inode() from filesystems quota: Rename vfs_load_quota_inode() to dquot_load_quota_inode() quota: Simplify dquot_resume() quota: Factor out setup of quota inode quota: Check that quota is not dirty before release quota: fix livelock in dquot_writeback_dquots ext2: don't set *count in the case of failure in ext2_try_to_allocate() ... | 30 November 2019, 19:16:07 UTC |
| e2d73c3 | Linus Torvalds | 30 November 2019, 19:13:33 UTC | Merge tag 'erofs-for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs updates from Gao Xiang: "No major kernel updates for this round since I'm fully diving into LZMA algorithm internals now to provide high CR XZ algorihm support. That needs more work and time for me to get a better compression time. Summary: - Introduce superblock checksum support - Set iowait when waiting I/O for sync decompression path - Several code cleanups" * tag 'erofs-for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: remove unnecessary output in erofs_show_options() erofs: drop all vle annotations for runtime names erofs: support superblock checksum erofs: set iowait for sync decompression erofs: clean up decompress queue stuffs erofs: get rid of __stagingpage_alloc helper erofs: remove dead code since managed cache is now built-in erofs: clean up collection handling routines | 30 November 2019, 19:13:33 UTC |
| 21b26d2 | Linus Torvalds | 30 November 2019, 19:10:39 UTC | Merge tag '5.5-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs updates from Steve French: "Various smb3 fixes (including 12 for stable) and also features (addition of multichannel support)" * tag '5.5-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (41 commits) CIFS: fix a white space issue in cifs_get_inode_info() cifs: update internal module version number cifs: Always update signing key of first channel cifs: Fix retrieval of DFS referrals in cifs_mount() cifs: Fix potential softlockups while refreshing DFS cache cifs: Fix lookup of root ses in DFS referral cache cifs: Fix use-after-free bug in cifs_reconnect() cifs: dump channel info in DebugData smb3: dump in_send and num_waiters stats counters by default cifs: try harder to open new channels CIFS: Properly process SMB3 lease breaks cifs: move cifsFileInfo_put logic into a work-queue cifs: try opening channels after mounting CIFS: refactor cifs_get_inode_info() cifs: switch servers depending on binding state cifs: add server param cifs: add multichannel mount options and data structs cifs: sort interface list by speed CIFS: Fix SMB2 oplock break processing cifs: don't use 'pre:' for MODULE_SOFTDEP ... | 30 November 2019, 19:10:39 UTC |
| 8f45533 | Linus Torvalds | 30 November 2019, 19:02:30 UTC | Merge tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "In this round, we've introduced fairly small number of patches as below. Enhancements: - improve the in-place-update IO flow - allocate segment to guarantee no GC for pinned files Bug fixes: - fix updatetime in lazytime mode - potential memory leak in f2fs_listxattr - record parent inode number in rename2 correctly - fix deadlock in f2fs_gc along with atomic writes - avoid needless data migration in GC" * tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: stop GC when the victim becomes fully valid f2fs: expose main_blkaddr in sysfs f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project() f2fs: Fix deadlock in f2fs_gc() context during atomic files handling f2fs: show f2fs instance in printk_ratelimited f2fs: fix potential overflow f2fs: fix to update dir's i_pino during cross_rename f2fs: support aligned pinned file f2fs: avoid kernel panic on corruption test f2fs: fix wrong description in document f2fs: cache global IPU bio f2fs: fix to avoid memory leakage in f2fs_listxattr f2fs: check total_segments from devices in raw_super f2fs: update multi-dev metadata in resize_fs f2fs: mark recovery flag correctly in read_raw_super_block() f2fs: fix to update time in lazytime mode | 30 November 2019, 19:02:30 UTC |
| 4a55d36 | Linus Torvalds | 30 November 2019, 18:57:22 UTC | Merge tag 'afs-next-20191121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS updates from David Howells: "Minor cleanups and fix: - Minor fix to make some debugging statements display information from the correct iov_iter. - Rename some members and variables to make things more obvious or consistent. - Provide a helper to wrap increments of the usage count on the afs_read struct. - Use scnprintf() to print into a stack buffer rather than sprintf(). - Remove some set but unused variables" * tag 'afs-next-20191121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Remove set but not used variable 'ret' afs: Remove set but not used variables 'before', 'after' afs: xattr: use scnprintf afs: Introduce an afs_get_read() refcount helper afs: Rename desc -> req in afs_fetch_data() afs: Switch the naming of call->iter and call->_iter afs: Use call->_iter not &call->iter in debugging statements | 30 November 2019, 18:57:22 UTC |
| 50b8b3f | Linus Torvalds | 30 November 2019, 18:53:02 UTC | Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "This merge window saw the the following new featuers added to ext4: - Direct I/O via iomap (required the iomap-for-next branch from Darrick as a prereq). - Support for using dioread-nolock where the block size < page size. - Support for encryption for file systems where the block size < page size. - Rework of journal credits handling so a revoke-heavy workload will not cause the journal to run out of space. - Replace bit-spinlocks with spinlocks in jbd2 Also included were some bug fixes and cleanups, mostly to clean up corner cases from fuzzed file systems and error path handling" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (59 commits) ext4: work around deleting a file with i_nlink == 0 safely ext4: add more paranoia checking in ext4_expand_extra_isize handling jbd2: make jbd2_handle_buffer_credits() handle reserved handles ext4: fix a bug in ext4_wait_for_tail_page_commit ext4: bio_alloc with __GFP_DIRECT_RECLAIM never fails ext4: code cleanup for get_next_id ext4: fix leak of quota reservations ext4: remove unused variable warning in parse_options() ext4: Enable encryption for subpage-sized blocks fs/buffer.c: support fscrypt in block_read_full_page() ext4: Add error handling for io_end_vec struct allocation jbd2: Fine tune estimate of necessary descriptor blocks jbd2: Provide trace event for handle restarts ext4: Reserve revoke credits for freed blocks jbd2: Make credit checking more strict jbd2: Rename h_buffer_credits to h_total_credits jbd2: Reserve space for revoke descriptor blocks jbd2: Drop jbd2_space_needed() jbd2: Account descriptor blocks into t_outstanding_credits jbd2: Factor out common parts of stopping and restarting a handle ... | 30 November 2019, 18:53:02 UTC |
| f112a2f | Linus Torvalds | 30 November 2019, 18:48:24 UTC | Merge tag 'vfs-5.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull splice fix from Darrick Wong: "Fix another place in the splice code where a pipe could ask a filesystem for a longer read than the pipe actually has free buffer space" * tag 'vfs-5.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: splice: only read in as much information as there is pipe buffer space | 30 November 2019, 18:48:24 UTC |
| 3b266a5 | Linus Torvalds | 30 November 2019, 18:44:49 UTC | Merge tag 'iomap-5.5-merge-11' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull iomap updates from Darrick Wong: "In this release, we hoisted as much of XFS' writeback code into iomap as was practicable, refactored the unshare file data function, added the ability to perform buffered io copy on write, and tweaked various parts of the directio implementation as needed to port ext4's directio code (that will be a separate pull). Summary: - Make iomap_dio_rw callers explicitly tell us if they want us to wait - Port the xfs writeback code to iomap to complete the buffered io library functions - Refactor the unshare code to share common pieces - Add support for performing copy on write with buffered writes - Other minor fixes - Fix unchecked return in iomap_bmap - Fix a type casting bug in a ternary statement in iomap_dio_bio_actor - Improve tracepoints for easier diagnostic ability - Fix pipe page leakage in directio reads" * tag 'iomap-5.5-merge-11' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits) iomap: Fix pipe page leakage during splicing iomap: trace iomap_appply results iomap: fix return value of iomap_dio_bio_actor on 32bit systems iomap: iomap_bmap should check iomap_apply return value iomap: Fix overflow in iomap_page_mkwrite fs/iomap: remove redundant check in iomap_dio_rw() iomap: use a srcmap for a read-modify-write I/O iomap: renumber IOMAP_HOLE to 0 iomap: use write_begin to read pages to unshare iomap: move the zeroing case out of iomap_read_page_sync iomap: ignore non-shared or non-data blocks in xfs_file_dirty iomap: always use AOP_FLAG_NOFS in iomap_write_begin iomap: remove the unused iomap argument to __iomap_write_end iomap: better document the IOMAP_F_* flags iomap: enhance writeback error message iomap: pass a struct page to iomap_finish_page_writeback iomap: cleanup iomap_ioend_compare iomap: move struct iomap_page out of iomap.h iomap: warn on inline maps in iomap_writepage_map iomap: lift the xfs writeback code to iomap ... | 30 November 2019, 18:44:49 UTC |
| e3cb40d | Bjorn Andersson | 30 November 2019, 18:34:36 UTC | Revert "dt-bindings: remoteproc: stm32: add wakeup-source" The DeviceTree binding document was converted to YAML in a patch that is being merged through the devicetree tree, as such this patch needs to be rewritten and is currently cause for a merge conflict. This reverts commit 14ea1d04ed0f7bae60951bdb8eeaa55cdbb26c73. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> | 30 November 2019, 18:41:03 UTC |
| aa32f11 | Linus Torvalds | 30 November 2019, 18:33:14 UTC | Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This is another round of bug fixing and cleanup. This time the focus is on the driver pattern to use mmu notifiers to monitor a VA range. This code is lifted out of many drivers and hmm_mirror directly into the mmu_notifier core and written using the best ideas from all the driver implementations. This removes many bugs from the drivers and has a very pleasing diffstat. More drivers can still be converted, but that is for another cycle. - A shared branch with RDMA reworking the RDMA ODP implementation - New mmu_interval_notifier API. This is focused on the use case of monitoring a VA and simplifies the process for drivers - A common seq-count locking scheme built into the mmu_interval_notifier API usable by drivers that call get_user_pages() or hmm_range_fault() with the VA range - Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen GntDev drivers to the new API. This deletes a lot of wonky driver code. - Two improvements for hmm_range_fault(), from testing done by Ralph" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap mm/hmm: make full use of walk_page_range() xen/gntdev: use mmu_interval_notifier_insert mm/hmm: remove hmm_mirror and related drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror drm/amdgpu: Call find_vma under mmap_sem nouveau: use mmu_interval_notifier instead of hmm_mirror nouveau: use mmu_notifier directly for invalidate_range_start drm/radeon: use mmu_interval_notifier_insert RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv RDMA/odp: Use mmu_interval_notifier_insert() mm/hmm: define the pre-processor related parts of hmm.h even if disabled mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror mm/mmu_notifier: add an interval tree notifier mm/mmu_notifier: define the header pre-processor parts even if disabled mm/hmm: allow snapshot of the special zero page | 30 November 2019, 18:33:14 UTC |
| d5bb349 | Linus Torvalds | 30 November 2019, 17:38:11 UTC | Merge tag 'drm-vmwgfx-coherent-2019-11-29' of git://anongit.freedesktop.org/drm/drm Pull drm coherent memory support for vmwgfx from Dave Airlie: "This is a separate pull for the mm pagewalking + drm/vmwgfx work Thomas did and you were involved in, I've left it separate in case you don't feel as comfortable with it as the other stuff. It has mm acks/r-b in the right places from what I can see" * tag 'drm-vmwgfx-coherent-2019-11-29' of git://anongit.freedesktop.org/drm/drm: drm/vmwgfx: Add surface dirty-tracking callbacks drm/vmwgfx: Implement an infrastructure for read-coherent resources drm/vmwgfx: Use an RBtree instead of linked list for MOB resources drm/vmwgfx: Implement an infrastructure for write-coherent resources mm: Add write-protect and clean utilities for address space ranges mm: Add a walk_page_mapping() function to the pagewalk code mm: pagewalk: Take the pagetable lock in walk_pte_range() mm: Remove BUG_ON mmap_sem not held from xxx_trans_huge_lock() drm/ttm: Convert vm callbacks to helpers drm/ttm: Remove explicit typecasts of vm_private_data | 30 November 2019, 17:38:11 UTC |
| d8d0470 | Jiri Kosina | 29 November 2019, 19:39:21 UTC | Merge branch 'for-5.5/whiskers' into for-linus - robustification of tablet mode support in google-whiskers driver (Dmitry Torokhov) | 29 November 2019, 19:39:21 UTC |
| a820e45 | Jiri Kosina | 29 November 2019, 19:37:55 UTC | Merge branch 'for-5.5/logitech' into for-linus - Support for Logitech G15 (Hans de Goede) - silencing of non-informative error flow in dmesg from logitechi-hiddpp (Hans de Goede) | 29 November 2019, 19:37:55 UTC |
| 2fa5532 | Jiri Kosina | 29 November 2019, 19:37:10 UTC | Merge branch 'for-5.5/ish' into for-linus - typo fix (Geert Uytterhoeven) | 29 November 2019, 19:37:10 UTC |
| b49b511 | Jiri Kosina | 29 November 2019, 19:36:45 UTC | Merge branch 'for-5.5/i2c' into for-linus - removal of superfluous delay (You-Sheng Yang) | 29 November 2019, 19:36:45 UTC |
| 09f5429 | Jiri Kosina | 29 November 2019, 19:36:00 UTC | Merge branch 'for-5.5/hidraw' into for-linus - printk() -> pr_*() cleanup (Rishi Gupta) | 29 November 2019, 19:36:00 UTC |
| b746a1a | Jiri Kosina | 29 November 2019, 19:34:28 UTC | Merge branch 'for-5.5/core' into for-linus - hid_have_special_driver[] cleanup for LED devices (Heiner Kallweit) - HID parser improvements (Blaž Hrastnik, Candle Sun) | 29 November 2019, 19:34:28 UTC |
| aa4c396 | Jens Axboe | 29 November 2019, 17:14:00 UTC | io_uring: fix missing kmap() declaration on powerpc Christophe reports that current master fails building on powerpc with this error: CC fs/io_uring.o fs/io_uring.c: In function ‘loop_rw_iter’: fs/io_uring.c:1628:21: error: implicit declaration of function ‘kmap’ [-Werror=implicit-function-declaration] iovec.iov_base = kmap(iter->bvec->bv_page) ^ fs/io_uring.c:1628:19: warning: assignment makes pointer from integer without a cast [-Wint-conversion] iovec.iov_base = kmap(iter->bvec->bv_page) ^ fs/io_uring.c:1643:4: error: implicit declaration of function ‘kunmap’ [-Werror=implicit-function-declaration] kunmap(iter->bvec->bv_page); ^ which is caused by a missing highmem.h include. Fix it by including it. Fixes: 311ae9e159d8 ("io_uring: fix dead-hung for non-iter fixed rw") Reported-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 29 November 2019, 17:14:00 UTC |
| 2807273 | Christophe Leroy | 28 November 2019, 07:59:22 UTC | powerpc/fixmap: fix crash with HIGHMEM Commit f2bb86937d86 ("powerpc/fixmap: don't clear fixmap area in paging_init()") removed the clearing of fixmap area in order to avoid clearing fixmapped areas set earlier. However unlike all other users of fixmap which use __set_fixmap(), HIGHMEM functions directly use __set_pte_at(). This means the page table must pre-exist, otherwise the following crash can be encoutered due to the lack of entry in the PGD. Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0+ #2528 NIP: c0144ce8 LR: c0144ccc CTR: 00000080 REGS: ef0b5aa0 TRAP: 0300 Not tainted (5.4.0+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 44282842 XER: 00000000 DAR: fffdf000 DSISR: 42000000 GPR00: c0144ccc ef0b5b58 ef0b0000 fffdf000 fffdf000 00000000 c0000f7c 00000000 GPR08: c0833000 fffdf000 00000000 ef1c53c9 24042842 00000000 00000000 00000000 GPR16: 00000000 00000000 ef7e7358 effe8160 00000000 c08a9660 c0851644 00000004 GPR24: c08c70a8 00002dc2 00000000 00000001 00000201 effe8160 effe8160 00000000 NIP [c0144ce8] prep_new_page+0x138/0x178 LR [c0144ccc] prep_new_page+0x11c/0x178 Call Trace: [ef0b5b58] [c0144ccc] prep_new_page+0x11c/0x178 (unreliable) [ef0b5b88] [c0147218] get_page_from_freelist+0x1fc/0xd88 [ef0b5c38] [c0148328] __alloc_pages_nodemask+0xd4/0xbb4 [ef0b5cf8] [c0142ba8] __vmalloc_node_range+0x1b4/0x2e0 [ef0b5d38] [c0142dd0] vzalloc+0x48/0x58 [ef0b5d58] [c0301c8c] check_partition+0x58/0x244 [ef0b5d78] [c02ffe80] blk_add_partitions+0x44/0x2cc [ef0b5db8] [c01a32d8] bdev_disk_changed+0x68/0xfc [ef0b5de8] [c01a4494] __blkdev_get+0x290/0x460 [ef0b5e28] [c02fdd40] __device_add_disk+0x480/0x4d8 [ef0b5e68] [c0810688] brd_init+0xc0/0x188 [ef0b5e88] [c0005194] do_one_initcall+0x40/0x19c [ef0b5ee8] [c07dd4dc] kernel_init_freeable+0x164/0x230 [ef0b5f28] [c0005408] kernel_init+0x18/0x10c [ef0b5f38] [c0014274] ret_from_kernel_thread+0x14/0x1c Partially revert that commit to still clear the fixmap area dedicated to HIGHMEM. Fixes: f2bb86937d86 ("powerpc/fixmap: don't clear fixmap area in paging_init()") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d42fa9747df5afa41e67b08e374c98d3b40529c9.1574927918.git.christophe.leroy@c-s.fr | 29 November 2019, 11:41:15 UTC |
| 6f09019 | YueHaibing | 15 November 2019, 13:08:30 UTC | x86/efi: remove unused variables commit ad723674d675 ("x86/efi: move common keyring handler functions to new file") leave this unused. Fixes: ad723674d675 ("x86/efi: move common keyring handler functions to new file") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191115130830.13320-1-yuehaibing@huawei.com | 29 November 2019, 11:23:46 UTC |
| 5a43b87 | Srinivas Pandruvada | 28 November 2019, 15:08:24 UTC | x86/mce/therm_throt: Mask out read-only and reserved MSR bits While writing to MSR IA32_THERM_STATUS/IA32_PKG_THERM_STATUS, avoid writing 1 to read only and reserved fields because updating some fields generates exception. [ bp: Vertically align for better readability. ] Fixes: f6656208f04e ("x86/mce/therm_throt: Optimize notifications of thermal throttle") Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Tested-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191128150824.22413-1-srinivas.pandruvada@linux.intel.com | 29 November 2019, 08:17:52 UTC |
| 81b6b96 | Linus Torvalds | 28 November 2019, 19:16:43 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ... | 28 November 2019, 19:16:43 UTC |
| a308a71 | Linus Torvalds | 28 November 2019, 18:57:12 UTC | Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap Pull generic ioremap support from Christoph Hellwig: "This adds the remaining bits for an entirely generic ioremap and iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant mess of weird ioremap variants we had with no users outside the arch code. For now just the three newest ports use the code, but there is more than a handful others that can be converted without too much work. Summary: - clean up various obsolete ioremap and iounmap variants - add a new generic ioremap implementation and switch csky, nds32 and riscv over to it" * tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits) nds32: use generic ioremap csky: use generic ioremap csky: remove ioremap_cache riscv: use the generic ioremap code lib: provide a simple generic ioremap implementation sh: remove __iounmap nios2: remove __iounmap hexagon: remove __iounmap m68k: rename __iounmap and mark it static arch: rely on asm-generic/io.h for default ioremap_* definitions asm-generic: don't provide ioremap for CONFIG_MMU asm-generic: ioremap_uc should behave the same with and without MMU xtensa: clean up ioremap x86: Clean up ioremap() parisc: remove __ioremap nios2: remove __ioremap alpha: remove the unused __ioremap wrapper hexagon: clean up ioremap ia64: rename ioremap_nocache to ioremap_uc unicore32: remove ioremap_cached ... | 28 November 2019, 18:57:12 UTC |
| 05bd375 | Linus Torvalds | 28 November 2019, 18:43:39 UTC | Merge tag 'for-5.5/io_uring-post-20191128' of git://git.kernel.dk/linux-block Pull more io_uring updates from Jens Axboe: "As mentioned in the first pull request, there was a later batch as well. This contains fixes to the stuff that already went in, cleanups, and a few later additions. In particular, this contains: - Cleanups/fixes/unification of the submission and completion path (Pavel,me) - Linked timeouts improvements (Pavel,me) - Error path fixes (me) - Fix lookup window where cancellations wouldn't work (me) - Improve DRAIN support (Pavel) - Fix backlog flushing -EBUSY on submit (me) - Add support for connect(2) (me) - Fix for non-iter based fixed IO (Pavel) - creds inheritance for async workers (me) - Disable cmsg/ancillary data for sendmsg/recvmsg (me) - Shrink io_kiocb to 3 cachelines (me) - NUMA fix for io-wq (Jann)" * tag 'for-5.5/io_uring-post-20191128' of git://git.kernel.dk/linux-block: (42 commits) io_uring: make poll->wait dynamically allocated io-wq: shrink io_wq_work a bit io-wq: fix handling of NUMA node IDs io_uring: use kzalloc instead of kcalloc for single-element allocations io_uring: cleanup io_import_fixed() io_uring: inline struct sqe_submit io_uring: store timeout's sqe->off in proper place net: disallow ancillary data for __sys_{send,recv}msg_file() net: separate out the msghdr copy from ___sys_{send,recv}msg() io_uring: remove superfluous check for sqe->off in io_accept() io_uring: async workers should inherit the user creds io-wq: have io_wq_create() take a 'data' argument io_uring: fix dead-hung for non-iter fixed rw io_uring: add support for IORING_OP_CONNECT net: add __sys_connect_file() helper io_uring: only return -EBUSY for submit on non-flushed backlog io_uring: only !null ptr to io_issue_sqe() io_uring: simplify io_req_link_next() io_uring: pass only !null to io_req_find_next() io_uring: remove io_free_req_find_next() ... | 28 November 2019, 18:43:39 UTC |
| 9677d64 | zhengbin | 28 November 2019, 03:09:32 UTC | ataflop: Remove unneeded semicolon Fixes coccicheck warning: drivers/block/ataflop.c:860:53-54: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 28 November 2019, 17:40:47 UTC |
| c15cc23 | zhengbin | 28 November 2019, 03:09:31 UTC | block: sunvdc: Remove unneeded semicolon Fixes coccicheck warning: drivers/block/sunvdc.c:637:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 28 November 2019, 17:40:46 UTC |
| ec45a26 | zhengbin | 28 November 2019, 03:09:30 UTC | drbd: Remove unneeded semicolon Fixes coccicheck warning: drivers/block/drbd/drbd_req.c:887:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 28 November 2019, 17:40:44 UTC |
| 6c5c240 | Roman Penyaev | 28 November 2019, 11:53:22 UTC | io_uring: add mapping support for NOMMU archs That is a bit weird scenario but I find it interesting to run fio loads using LKL linux, where MMU is disabled. Probably other real archs which run uClinux can also benefit from this patch. Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 28 November 2019, 17:08:02 UTC |
| a72e27f | Wolfram Sang | 06 November 2019, 09:50:23 UTC | video: fbdev: matrox: convert to i2c_new_scanned_device Move from the deprecated i2c_new_probed_device() to the new i2c_new_scanned_device(). Make use of the new ERRPTR if suitable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 28 November 2019, 16:19:20 UTC |
| ce66852 | Wolfram Sang | 06 November 2019, 09:50:20 UTC | i2c: icy: convert to i2c_new_scanned_device Move from the deprecated i2c_new_probed_device() to the new i2c_new_scanned_device(). Make use of the new ERRPTR if suitable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Max Staudt <max@enpas.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 28 November 2019, 16:15:48 UTC |
| c1d0847 | Wolfram Sang | 06 November 2019, 09:50:19 UTC | i2c: replace i2c_new_probed_device with an ERR_PTR variant In the general move to have i2c_new_*_device functions which return ERR_PTR instead of NULL, this patch converts i2c_new_probed_device(). There are only few users, so this patch converts the I2C core and all users in one go. The function gets renamed to i2c_new_scanned_device() so out-of-tree users will get a build failure to understand they need to adapt their error checking code. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Max Staudt <max@enpas.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 28 November 2019, 16:15:21 UTC |
| 6d29032 | Rahul Tanwar | 28 November 2019, 08:08:32 UTC | pinctrl: Fix warning by adding missing MODULE_LICENSE Fix below build warning WARNING: modpost: missing MODULE_LICENSE() in drivers/pinctrl/pinctrl-equilibrium.o Introduced by commit 1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC") by adding missing MODULE_LICENSE. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/20191128080832.13529-2-rahul.tanwar@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 28 November 2019, 08:12:43 UTC |
