0c309ed | Chanwoo Choi | 08 September 2020, 10:57:07 UTC | PM / devfreq: Add timer type to devfreq_summary debugfs The commit 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") supports the delayed timer but this commit missed the adding the timer type to devfreq_summary debugfs node. Add the timer type to devfreq_summary debugfs. Fixes: 4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> | 23 September 2020, 04:35:58 UTC |
ba4f184 | Linus Torvalds | 20 September 2020, 23:33:55 UTC | Linux 5.9-rc6 | 20 September 2020, 23:33:55 UTC |
e2bff39 | Linus Torvalds | 20 September 2020, 22:37:15 UTC | Merge tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull syscall tracing fix from Borislav Petkov: "Fix the seccomp syscall rewriting so that trace and audit see the rewritten syscall number, from Kees Cook" * tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: core/entry: Report syscall correctly for trace and audit | 20 September 2020, 22:37:15 UTC |
1f8ee7e | Linus Torvalds | 20 September 2020, 22:31:04 UTC | Merge tag 'objtool_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Borislav Petkov: "Fix noreturn detection for ignored sibling functions (Josh Poimboeuf)" * tag 'objtool_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix noreturn detection for ignored functions | 20 September 2020, 22:31:04 UTC |
3d49167 | Linus Torvalds | 20 September 2020, 22:25:33 UTC | Merge tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: "Two fixes from the locking/urgent pile: - Fix lockdep's detection of "USED" <- "IN-NMI" inversions (Peter Zijlstra) - Make percpu-rwsem operations on the semaphore's ->read_count IRQ-safe because it can be used in an IRQ context (Hou Tao)" * tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count locking/lockdep: Fix "USED" <- "IN-NMI" inversions | 20 September 2020, 22:25:33 UTC |
5674d81 | Linus Torvalds | 20 September 2020, 22:18:11 UTC | Merge tag 'efi-urgent-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Borislav Petkov: "Ensure that the EFI bootloader control module only probes successfully on systems that support the EFI SetVariable runtime service" [ Tag and commit from Ard Biesheuvel, forwarded by Borislav ] * tag 'efi-urgent-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: efibc: check for efivars write capability | 20 September 2020, 22:18:11 UTC |
217eee7 | Linus Torvalds | 20 September 2020, 22:06:43 UTC | Merge tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - A defconfig fix (Daniel Díaz) - Disable relocation relaxation for the compressed kernel when not built as -pie as in that case kernels built with clang and linked with LLD fail to boot due to the linker optimizing some instructions in non-PIE form; the gory details in the commit message (Arvind Sankar) - A fix for the "bad bp value" warning issued by the frame-pointer unwinder (Josh Poimboeuf) * tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/fp: Fix FP unwinding in ret_from_fork x86/boot/compressed: Disable relocation relaxation x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfig | 20 September 2020, 22:06:43 UTC |
4a123db | Linus Torvalds | 20 September 2020, 22:01:57 UTC | Merge tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A handful of fixes to address a string of mistakes in the mechanism for device-mapper to determine if its component devices are dax capable. - Fix an original bug in device-mapper table reference counting when interrogating dax capability in the component device. This bug was hidden by the following bug. - Fix device-mapper to use the proper helper (dax_supported() instead of the leaf helper generic_fsdax_supported()) to determine dax operation of a stacked block device configuration. The original implementation is only valid for one level of dax-capable block device stacking. This bug was discovered while fixing the below regression. - Fix an infinite recursion regression introduced by broken attempts to quiet the generic_fsdax_supported() path and make it bail out before logging "dax capability not found" errors" * tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix stack overflow when mounting fsdax pmem device dm: Call proper helper to determine dax support dm/dax: Fix table reference counts | 20 September 2020, 22:01:57 UTC |
bdcf11d | Linus Torvalds | 20 September 2020, 17:51:11 UTC | Merge tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix for a lockdep issue to avoid an asserting triggering during early boot. There shouldn't be any incorrect behavior as the system isn't concurrent at the time. - The addition of a missing fence when installing early fixmap mappings. - A corretion to the K210 device tree's interrupt map. - A fix for M-mode timer handling on the K210. * tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Resurrect the MMIO timer implementation for M-mode systems riscv: Fix Kendryte K210 device tree riscv: Add sfence.vma after early page table changes RISC-V: Take text_mutex in ftrace_init_nop() | 20 September 2020, 17:51:11 UTC |
d0373c1 | Linus Torvalds | 20 September 2020, 17:48:20 UTC | Merge tag 'usb-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt fixes from Greg KH: "Here are some small USB and one Thunderbolt driver fixes. Nothing major at all, just some fixes for reported issues, and a quirk addition: - typec fixes - UAS disconnect fix - usblp race fix - ehci-hcd modversions build fix - ignore wakeup quirk table addition - thunderbolt DROM read fix All of these have been in linux-next with no reported issues" * tag 'usb-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usblp: fix race between disconnect() and read() ehci-hcd: Move include to keep CRC stable usb: typec: intel_pmc_mux: Handle SCU IPC error conditions USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook USB: UAS: fix disconnect by unplugging a hub usb: typec: ucsi: Prevent mode overrun usb: typec: ucsi: acpi: Increase command completion timeout value thunderbolt: Retry DROM read once if parsing fails | 20 September 2020, 17:48:20 UTC |
f44f3f8 | Linus Torvalds | 20 September 2020, 17:46:26 UTC | Merge tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial/fbcon fixes from Greg KH: "Here are some small tty/serial and one more fbcon fix. They include: - serial core locking regression fixes - new device ids for 8250_pci driver - fbcon fix for syzbot found issue All have been in linux-next with no reported issues" * tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fbcon: Fix user font detection test at fbcon_resize(). serial: 8250_pci: Add Realtek 816a and 816b serial: core: fix console port-lock regression serial: core: fix port-lock initialisation | 20 September 2020, 17:46:26 UTC |
aac5925 | Linus Torvalds | 20 September 2020, 17:43:59 UTC | Merge tag 'edac_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: "Two fixes for resulting from CONFIG_DEBUG_TEST_DRIVER_REMOVE=y experiments: - complete a previous fix to reset a local structure containing scanned system data properly so that the driver rescans, as it should, on a second load. - address a refcount underflow due to not paying attention to the driver whitelest on unregister" * tag 'edac_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ghes: Check whether the driver is on the safe list correctly EDAC/ghes: Clear scanned data on unload | 20 September 2020, 17:43:59 UTC |
376566c | Linus Torvalds | 20 September 2020, 17:40:43 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a couple of driver quirks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: trackpoint - add new trackpoint variant IDs Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists | 20 September 2020, 17:40:43 UTC |
5868ec2 | Linus Torvalds | 20 September 2020, 17:38:47 UTC | mm: fix wake_page_function() comment typos Sedat Dilek pointed out some silly comment typo issues. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 September 2020, 17:38:47 UTC |
c7948fe | Linus Torvalds | 20 September 2020, 17:08:45 UTC | Merge tag 'kbuild-fixes-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: "Fix qconf warnings and revive help message" * tag 'kbuild-fixes-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: qconf: revive help message in the info view kconfig: qconf: fix incomplete type 'struct gstr' warning kconfig: qconf: use delete[] instead of delete to free array (again) | 20 September 2020, 17:08:45 UTC |
d4c5da5 | Adrian Huang | 17 September 2020, 11:15:49 UTC | dax: Fix stack overflow when mounting fsdax pmem device When mounting fsdax pmem device, commit 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices") introduces the stack overflow [1][2]. Here is the call path for mounting ext4 file system: ext4_fill_super bdev_dax_supported __bdev_dax_supported dax_supported generic_fsdax_supported __generic_fsdax_supported bdev_dax_supported The call path leads to the infinite calling loop, so we cannot call bdev_dax_supported() in __generic_fsdax_supported(). The sanity checking of the variable 'dax_dev' is moved prior to the two bdev_dax_pgoff() checks [3][4]. [1] https://lore.kernel.org/linux-nvdimm/1420999447.1004543.1600055488770.JavaMail.zimbra@redhat.com/ [2] https://lore.kernel.org/linux-nvdimm/alpine.LRH.2.02.2009141131220.30651@file01.intranet.prod.int.rdu2.redhat.com/ [3] https://lore.kernel.org/linux-nvdimm/CA+RJvhxBHriCuJhm-D8NvJRe3h2MLM+ZMFgjeJjrRPerMRLvdg@mail.gmail.com/ [4] https://lore.kernel.org/linux-nvdimm/20200903160608.GU878166@iweiny-DESK2.sc.intel.com/ Fixes: 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices") Reported-by: Yi Zhang <yi.zhang@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> Cc: Coly Li <colyli@suse.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: John Pittman <jpittman@redhat.com> Link: https://lore.kernel.org/r/20200917111549.6367-1-adrianhuang0701@gmail.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 20 September 2020, 15:57:36 UTC |
e2ec512 | Jan Kara | 20 September 2020, 15:54:42 UTC | dm: Call proper helper to determine dax support DM was calling generic_fsdax_supported() to determine whether a device referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that they don't have to duplicate common generic checks. High level code should call dax_supported() helper which that calls into appropriate helper for the particular device. This problem manifested itself as kernel messages: dm-3: error: dax access failed (-95) when lvm2-testsuite run in cases where a DM device was stacked on top of another DM device. Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mike Snitzer <snitzer@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 20 September 2020, 15:55:09 UTC |
02186d8 | Dan Williams | 18 September 2020, 19:51:15 UTC | dm/dax: Fix table reference counts A recent fix to the dm_dax_supported() flow uncovered a latent bug. When dm_get_live_table() fails it is still required to drop the srcu_read_lock(). Without this change the lvm2 test-suite triggers this warning: # lvm2-testsuite --only pvmove-abort-all.sh WARNING: lock held when returning to user space! 5.9.0-rc5+ #251 Tainted: G OE ------------------------------------------------ lvm/1318 is leaving the kernel with locks still held! 1 lock held by lvm/1318: #0: ffff9372abb5a340 (&md->io_barrier){....}-{0:0}, at: dm_get_live_table+0x5/0xb0 [dm_mod] ...and later on this hang signature: INFO: task lvm:1344 blocked for more than 122 seconds. Tainted: G OE 5.9.0-rc5+ #251 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:lvm state:D stack: 0 pid: 1344 ppid: 1 flags:0x00004000 Call Trace: __schedule+0x45f/0xa80 ? finish_task_switch+0x249/0x2c0 ? wait_for_completion+0x86/0x110 schedule+0x5f/0xd0 schedule_timeout+0x212/0x2a0 ? __schedule+0x467/0xa80 ? wait_for_completion+0x86/0x110 wait_for_completion+0xb0/0x110 __synchronize_srcu+0xd1/0x160 ? __bpf_trace_rcu_utilization+0x10/0x10 __dm_suspend+0x6d/0x210 [dm_mod] dm_suspend+0xf6/0x140 [dm_mod] Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Reported-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Link: https://lore.kernel.org/r/160045867590.25663.7548541079217827340.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 20 September 2020, 15:33:56 UTC |
a46afd1 | Masahiro Yamada | 14 September 2020, 14:59:48 UTC | kconfig: qconf: revive help message in the info view Since commit 68fd110b3e7e ("kconfig: qconf: remove redundant help in the info view"), the help message is no longer displayed. I intended to drop duplicated "Symbol:", "Type:", but precious info about help and reverse dependencies was lost too. Revive it now. "defined at" is contained in menu_get_ext_help(), so I made sure to not display it twice. Fixes: 68fd110b3e7e ("kconfig: qconf: remove redundant help in the info view") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 20 September 2020, 03:58:54 UTC |
19b835a | Masahiro Yamada | 08 September 2020, 22:16:38 UTC | kconfig: qconf: fix incomplete type 'struct gstr' warning "make HOSTCXX=clang++ xconfig" reports the following: HOSTCXX scripts/kconfig/qconf.o In file included from scripts/kconfig/qconf.cc:23: In file included from scripts/kconfig/lkc.h:15: scripts/kconfig/lkc_proto.h:26:13: warning: 'get_relations_str' has C-linkage specified, but returns incomplete type 'struct gstr' which could be incompatible with C [-Wreturn-type-c-linkage] struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head); ^ Currently, get_relations_str() is declared before the struct gstr definition. Move all declarations of menu.c functions below. BTW, some are declared in lkc.h and some in lkc_proto.h, but the difference is unclear. I guess some refactoring is needed. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Boris Kolpackov <boris@codesynthesis.com> | 20 September 2020, 03:58:49 UTC |
325d0ea | Linus Torvalds | 20 September 2020, 01:18:37 UTC | Merge branch 'akpm' (patches from Andrew) Merge fixes from Andrew Morton: "15 patches. Subsystems affected by this patch series: mailmap, mm/hotfixes, mm/thp, mm/memory-hotplug, misc, kcsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kcsan: kconfig: move to menu 'Generic Kernel Debugging Instruments' fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype stackleak: let stack_erasing_sysctl take a kernel pointer buffer ftrace: let ftrace_enable_sysctl take a kernel pointer buffer mm/memory_hotplug: drain per-cpu pages again during memory offline selftests/vm: fix display of page size in map_hugetlb mm/thp: fix __split_huge_pmd_locked() for migration PMD kprobes: fix kill kprobe which has been marked as gone tmpfs: restore functionality of nr_inodes=0 mlock: fix unevictable_pgs event counts on THP mm: fix check_move_unevictable_pages() on THP mm: migration of hugetlbfs page skip memcg ksm: reinstate memcg charge on copied pages mailmap: add older email addresses for Kees Cook | 20 September 2020, 01:18:37 UTC |
c8d1a46 | Linus Torvalds | 19 September 2020, 20:24:37 UTC | Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Another bunch of fixes for I2C. Jean's i801 patch is a cleanup on top of Volker's i801 patch, but it will make dependency handling much easier if those two go together" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK i2c: mediatek: Send i2c master code at more than 1MHz i2c: mediatek: Fix generic definitions for bus frequency i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices() i2c: i801: Simplify the suspend callback i2c: i801: Fix resume bug i2c: aspeed: Mask IRQ status to relevant bits | 19 September 2020, 20:24:37 UTC |
d5be89a | Palmer Dabbelt | 14 September 2020, 16:56:30 UTC | RISC-V: Resurrect the MMIO timer implementation for M-mode systems The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs in the NOMMU systems that means we can't use rdtime. The K210 is the only system that anyone is currently running NOMMU or M-mode on, so here we're just inlining the timer read directly. This also adds the CLINT driver as an !MMU dependency, as it's currently the only timer driver availiable for these systems and without it we get a build failure for some configurations. Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 19 September 2020, 20:21:11 UTC |
f025d9d | Damien Le Moal | 16 September 2020, 07:59:41 UTC | riscv: Fix Kendryte K210 device tree The Kendryte K210 SoC CLINT is compatible with Sifive clint v0 (sifive,clint0). Fix the Kendryte K210 device tree clint entry to be inline with the sifive timer definition documented in Documentation/devicetree/bindings/timer/sifive,clint.yaml. The device tree clint entry is renamed similarly to u-boot device tree definition to improve compatibility with u-boot defined device tree. To ensure correct initialization, the interrup-cells attribute is added and the interrupt-extended attribute definition fixed. This fixes boot failures with Kendryte K210 SoC boards. Note that the clock referenced is kept as K210_CLK_ACLK, which does not necessarilly match the clint MTIME increment rate. This however does not seem to cause any problem for now. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 19 September 2020, 20:20:14 UTC |
21190b7 | Greentime Hu | 04 August 2020, 03:02:05 UTC | riscv: Add sfence.vma after early page table changes This invalidates local TLB after modifying the page tables during early init as it's too early to handle suprious faults as we otherwise do. Fixes: f2c17aabc917 ("RISC-V: Implement compile-time fixed mappings") Reported-by: Syven Wang <syven.wang@sifive.com> Signed-off-by: Syven Wang <syven.wang@sifive.com> Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [Palmer: Cleaned up the commit text] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> | 19 September 2020, 20:20:13 UTC |
2645d43 | Changbin Du | 19 September 2020, 04:20:42 UTC | kcsan: kconfig: move to menu 'Generic Kernel Debugging Instruments' This moves the KCSAN kconfig items under menu 'Generic Kernel Debugging Instruments' where UBSAN resides. Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Marco Elver <elver@google.com> Link: https://lkml.kernel.org/r/20200904152224.5570-1-changbin.du@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:39 UTC |
9ca48e2 | Tobias Klauser | 19 September 2020, 04:20:39 UTC | fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the definition of dirtytime_interval_handler to match its prototype in linux/writeback.h which fixes the following sparse error/warning: fs/fs-writeback.c:2189:50: warning: incorrect type in argument 3 (different address spaces) fs/fs-writeback.c:2189:50: expected void * fs/fs-writeback.c:2189:50: got void [noderef] __user *buffer fs/fs-writeback.c:2184:5: error: symbol 'dirtytime_interval_handler' redeclared with different type (incompatible argument 3 (different address spaces)): fs/fs-writeback.c:2184:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... ) fs/fs-writeback.c: note: in included file: ./include/linux/writeback.h:374:5: note: previously declared as: ./include/linux/writeback.h:374:5: int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... ) Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200907093140.13434-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:39 UTC |
4773ef3 | Tobias Klauser | 19 September 2020, 04:20:37 UTC | stackleak: let stack_erasing_sysctl take a kernel pointer buffer Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of stack_erasing_sysctl to match ctl_table.proc_handler which fixes the following sparse warning: kernel/stackleak.c:31:50: warning: incorrect type in argument 3 (different address spaces) kernel/stackleak.c:31:50: expected void * kernel/stackleak.c:31:50: got void [noderef] __user *buffer Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200907093253.13656-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:39 UTC |
7bb82ac | Tobias Klauser | 19 September 2020, 04:20:34 UTC | ftrace: let ftrace_enable_sysctl take a kernel pointer buffer Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of ftrace_enable_sysctl to match ctl_table.proc_handler which fixes the following sparse warning: kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces) kernel/trace/ftrace.c:7544:43: expected void * kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:39 UTC |
9683182 | Pavel Tatashin | 19 September 2020, 04:20:31 UTC | mm/memory_hotplug: drain per-cpu pages again during memory offline There is a race during page offline that can lead to infinite loop: a page never ends up on a buddy list and __offline_pages() keeps retrying infinitely or until a termination signal is received. Thread#1 - a new process: load_elf_binary begin_new_exec exec_mmap mmput exit_mmap tlb_finish_mmu tlb_flush_mmu release_pages free_unref_page_list free_unref_page_prepare set_pcppage_migratetype(page, migratetype); // Set page->index migration type below MIGRATE_PCPTYPES Thread#2 - hot-removes memory __offline_pages start_isolate_page_range set_migratetype_isolate set_pageblock_migratetype(page, MIGRATE_ISOLATE); Set migration type to MIGRATE_ISOLATE-> set drain_all_pages(zone); // drain per-cpu page lists to buddy allocator. Thread#1 - continue free_unref_page_commit migratetype = get_pcppage_migratetype(page); // get old migration type list_add(&page->lru, &pcp->lists[migratetype]); // add new page to already drained pcp list Thread#2 Never drains pcp again, and therefore gets stuck in the loop. The fix is to try to drain per-cpu lists again after check_pages_isolated_cb() fails. Fixes: c52e75935f8d ("mm: remove extra drain pages on pcp list") Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200903140032.380431-1-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20200904151448.100489-2-pasha.tatashin@soleen.com Link: http://lkml.kernel.org/r/20200904070235.GA15277@dhcp22.suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:39 UTC |
1ec882f | Christophe Leroy | 19 September 2020, 04:20:28 UTC | selftests/vm: fix display of page size in map_hugetlb The displayed size is in bytes while the text says it is in kB. Shift it by 10 to really display kBytes. Fixes: fa7b9a805c79 ("tools/selftest/vm: allow choosing mem size and page size in map_hugetlb") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/e27481224564a93d14106e750de31189deaa8bc8.1598861977.git.christophe.leroy@csgroup.eu Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:39 UTC |
ec0abae | Ralph Campbell | 19 September 2020, 04:20:24 UTC | mm/thp: fix __split_huge_pmd_locked() for migration PMD A migrating transparent huge page has to already be unmapped. Otherwise, the page could be modified while it is being copied to a new page and data could be lost. The function __split_huge_pmd() checks for a PMD migration entry before calling __split_huge_pmd_locked() leading one to think that __split_huge_pmd_locked() can handle splitting a migrating PMD. However, the code always increments the page->_mapcount and adjusts the memory control group accounting assuming the page is mapped. Also, if the PMD entry is a migration PMD entry, the call to is_huge_zero_pmd(*pmd) is incorrect because it calls pmd_pfn(pmd) instead of migration_entry_to_pfn(pmd_to_swp_entry(pmd)). Fix these problems by checking for a PMD migration entry. Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> [4.14+] Link: https://lkml.kernel.org/r/20200903183140.19055-1-rcampbell@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:38 UTC |
b039909 | Muchun Song | 19 September 2020, 04:20:21 UTC | kprobes: fix kill kprobe which has been marked as gone If a kprobe is marked as gone, we should not kill it again. Otherwise, we can disarm the kprobe more than once. In that case, the statistics of kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not work. Fixes: e8386a0cb22f ("kprobes: support probing module __exit function") Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Song Liu <songliubraving@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200822030055.32383-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:38 UTC |
bb3e96d | Byron Stanoszek | 19 September 2020, 04:20:18 UTC | tmpfs: restore functionality of nr_inodes=0 Commit e809d5f0b5c9 ("tmpfs: per-superblock i_ino support") made changes to shmem_reserve_inode() in mm/shmem.c, however the original test for (sbinfo->max_inodes) got dropped. This causes mounting tmpfs with option nr_inodes=0 to fail: # mount -ttmpfs -onr_inodes=0 none /ext0 mount: /ext0: mount(2) system call failed: Cannot allocate memory. This patch restores the nr_inodes=0 functionality. Fixes: e809d5f0b5c9 ("tmpfs: per-superblock i_ino support") Signed-off-by: Byron Stanoszek <gandalf@winds.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Chris Down <chris@chrisdown.name> Link: https://lkml.kernel.org/r/20200902035715.16414-1-gandalf@winds.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:38 UTC |
0964730 | Hugh Dickins | 19 September 2020, 04:20:15 UTC | mlock: fix unevictable_pgs event counts on THP 5.8 commit 5d91f31faf8e ("mm: swap: fix vmstats for huge page") has established that vm_events should count every subpage of a THP, including unevictable_pgs_culled and unevictable_pgs_rescued; but lru_cache_add_inactive_or_unevictable() was not doing so for unevictable_pgs_mlocked, and mm/mlock.c was not doing so for unevictable_pgs mlocked, munlocked, cleared and stranded. Fix them; but THPs don't go the pagevec way in mlock.c, so no fixes needed on that path. Fixes: 5d91f31faf8e ("mm: swap: fix vmstats for huge page") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Yang Shi <shy828301@gmail.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301408230.5954@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:38 UTC |
8d8869c | Hugh Dickins | 19 September 2020, 04:20:12 UTC | mm: fix check_move_unevictable_pages() on THP check_move_unevictable_pages() is used in making unevictable shmem pages evictable: by shmem_unlock_mapping(), drm_gem_check_release_pagevec() and i915/gem check_release_pagevec(). Those may pass down subpages of a huge page, when /sys/kernel/mm/transparent_hugepage/shmem_enabled is "force". That does not crash or warn at present, but the accounting of vmstats unevictable_pgs_scanned and unevictable_pgs_rescued is inconsistent: scanned being incremented on each subpage, rescued only on the head (since tails already appear evictable once the head has been updated). 5.8 commit 5d91f31faf8e ("mm: swap: fix vmstats for huge page") has established that vm_events in general (and unevictable_pgs_rescued in particular) should count every subpage: so follow that precedent here. Do this in such a way that if mem_cgroup_page_lruvec() is made stricter (to check page->mem_cgroup is always set), no problem: skip the tails before calling it, and add thp_nr_pages() to vmstats on the head. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Yang Shi <shy828301@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301405000.5954@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:38 UTC |
a333e3e | Hugh Dickins | 19 September 2020, 04:20:06 UTC | mm: migration of hugetlbfs page skip memcg hugetlbfs pages do not participate in memcg: so although they do find most of migrate_page_states() useful, it would be better if they did not call into mem_cgroup_migrate() - where Qian Cai reported that LTP's move_pages12 triggers the warning in Alex Shi's prospective commit "mm/memcg: warning on !memcg after readahead page charged". Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxch.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301359460.5954@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:38 UTC |
62fdb16 | Hugh Dickins | 19 September 2020, 04:20:03 UTC | ksm: reinstate memcg charge on copied pages Patch series "mm: fixes to past from future testing". Here's a set of independent fixes against 5.9-rc2: prompted by testing Alex Shi's "warning on !memcg" and lru_lock series, but I think fit for 5.9 - though maybe only the first for stable. This patch (of 5): In 5.8 some instances of memcg charging in do_swap_page() and unuse_pte() were removed, on the understanding that swap cache is now already charged at those points; but a case was missed, when ksm_might_need_to_copy() has decided it must allocate a substitute page: such pages were never charged. Fix it inside ksm_might_need_to_copy(). This was discovered by Alex Shi's prospective commit "mm/memcg: warning on !memcg after readahead page charged". But there is a another surprise: this also fixes some rarer uncharged PageAnon cases, when KSM is configured in, but has never been activated. ksm_might_need_to_copy()'s anon_vma->root and linear_page_index() check sometimes catches a case which would need to have been copied if KSM were turned on. Or that's my optimistic interpretation (of my own old code), but it leaves some doubt as to whether everything is working as intended there - might it hint at rare anon ptes which rmap cannot find? A question not easily answered: put in the fix for missed memcg charges. Cc; Matthew Wilcox <willy@infradead.org> Fixes: 4c6355b25e8b ("mm: memcontrol: charge swapin pages on instantiation") Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> [5.8] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301343270.5954@eggly.anvils Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301358020.5954@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:38 UTC |
b5bfe7d | Kees Cook | 19 September 2020, 04:20:00 UTC | mailmap: add older email addresses for Kees Cook This adds explicit mailmap entries for my older/other email addresses. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lkml.kernel.org/r/20200910193939.3798377-1-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 September 2020, 20:13:38 UTC |
eb5f95f | Linus Torvalds | 19 September 2020, 01:51:08 UTC | Merge tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix order in trace_hardirqs_off_caller() to make locking state consistent even if the IRQ tracer calls into lockdep again. Touches common code. Acked-by Peter Zijlstra. - Correctly handle secure storage violation exception to avoid kernel panic triggered by user space misbehaviour. - Switch the idle->seqcount over to using raw_write_*() to avoid "suspicious RCU usage". - Fix memory leaks on hard unplug in pci code. - Use kvmalloc instead of kmalloc for larger allocations in zcrypt. - Add few missing __init annotations to static functions to avoid section mismatch complains when functions are not inlined. * tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: add 3f program exception handler lockdep: fix order in trace_hardirqs_off_caller() s390/pci: fix leak of DMA tables on hard unplug s390/init: add missing __init annotations s390/zcrypt: fix kmalloc 256k failure s390/idle: fix suspicious RCU usage | 19 September 2020, 01:51:08 UTC |
6eb158e | Matthias Schiffer | 11 September 2020, 15:01:39 UTC | i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK The driver-specific usage of the DMA_CTRL_ACK flag was replaced with a custom flag in commit ceeeb99cd821 ("dmaengine: mxs: rename custom flag"), but i2c-mxs was not updated to use the new flag, completely breaking I2C transactions using DMA. Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> | 18 September 2020, 21:11:44 UTC |
b44658e | Qii Wang | 17 September 2020, 11:55:42 UTC | i2c: mediatek: Send i2c master code at more than 1MHz The master code needs to being sent when the speed is more than I2C_MAX_FAST_MODE_PLUS_FREQ, not I2C_MAX_FAST_MODE_FREQ in the latest I2C-bus specification and user manual. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> | 18 September 2020, 20:50:42 UTC |
ff6f3af | Qii Wang | 17 September 2020, 11:55:41 UTC | i2c: mediatek: Fix generic definitions for bus frequency The max frequency of mediatek i2c controller driver is I2C_MAX_HIGH_SPEED_MODE_FREQ, not I2C_MAX_FAST_MODE_PLUS_FREQ. Fix it. Fixes: 90224e6468e1 ("i2c: drivers: Use generic definitions for bus frequencies") Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> | 18 September 2020, 20:49:24 UTC |
92ab97a | Linus Torvalds | 18 September 2020, 18:59:15 UTC | Merge tag 'sh-for-5.9-part2' of git://git.libc.org/linux-sh Pull arch/sh fixes from Rich Felker: "Fixes for build and function regression" * tag 'sh-for-5.9-part2' of git://git.libc.org/linux-sh: sh: fix syscall tracing sh: remove spurious circular inclusion from asm/smp.h | 18 September 2020, 18:59:15 UTC |
69828c4 | Linus Torvalds | 18 September 2020, 18:55:43 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Allow CPUs affected by erratum 1418040 to come online late (previously we only fixed the other case - CPUs not affected by the erratum coming up late). - Fix branch offset in BPF JIT. - Defer the stolen time initialisation to the CPU online time from the CPU starting time to avoid a (sleep-able) memory allocation in an atomic context. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: paravirt: Initialize steal time when cpu is online arm64: bpf: Fix branch offset in JIT arm64: Allow CPUs unffected by ARM erratum 1418040 to come in late | 18 September 2020, 18:55:43 UTC |
5a55d36 | Linus Torvalds | 18 September 2020, 18:48:25 UTC | Merge tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.9: - Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing crashes. - Fix a long standing bug in our DMA mask handling that was hidden until recently, and which caused problems with some drivers. - Fix a boot failure on systems with large amounts of RAM, and no hugepage support and using Radix MMU, only seen in the lab. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy, Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav Jain, and Vaidyanathan Srinivasan" * tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute cpuidle: pseries: Fix CEDE latency conversion from tb to us powerpc/dma: Fix dma_map_ops::get_required_mask Revert "powerpc/build: vdso linker warning for orphan sections" powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc selftests/powerpc: Skip PROT_SAO test in guests/LPARS powerpc/book3s64/radix: Fix boot failure with large amount of guest memory | 18 September 2020, 18:48:25 UTC |
794a996 | Linus Torvalds | 18 September 2020, 18:43:21 UTC | Merge tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new CPU ID to the RAPL power capping driver and prevent the ACPI processor idle driver from triggering RCU-lockdep complaints. Specifics: - Add support for the Lakefield chip to the RAPL power capping driver (Ricardo Neri). - Modify the ACPI processor idle driver to prevent it from triggering RCU-lockdep complaints which has started to happen after recent changes in that area (Peter Zijlstra)" * tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: processor: Take over RCU-idle for C3-BM idle cpuidle: Allow cpuidle drivers to take over RCU-idle ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP powercap: RAPL: Add support for Lakefield | 18 September 2020, 18:43:21 UTC |
343b529 | Linus Torvalds | 18 September 2020, 18:38:08 UTC | Merge tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here is a collection of fixes for 5.9. All look small and are nothing scary. The majority of changes are about ASoC driver- specific fixes, while there are a couple of ASoC core fixes (DAI lookup and lockdep stuff) and usual HD-audio quirks" * tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits) ALSA: hda/realtek - The Mic on a RedmiBook doesn't work ASoC: tlv320adcx140: Wake up codec before accessing register ASoC: core: Do not cleanup uninitialized dais on soc_pcm_open failure ALSA: hda: fixup headset for ASUS GX502 laptop ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN Converter9 2-in-1 ASoC: Intel: haswell: Fix power transition refactor ASoC: tlv320adcx140: Fix accessing uninitialized adcx140->dev ASoC: wm8994: Ensure the device is resumed in wm89xx_mic_detect functions ASoC: wm8994: Skip setting of the WM8994_MICBIAS register for WM1811 ASoC: meson: axg-toddr: fix channel order on g12 platforms ASoC: soc-core: add snd_soc_find_dai_with_mutex() ASoC: qcom: common: Fix refcount imbalance on error ASoC: rt700: Fix return check for devm_regmap_init_sdw() ASoC: rt715: Fix return check for devm_regmap_init_sdw() ASoC: rt711: Fix return check for devm_regmap_init_sdw() ASoC: rt1308-sdw: Fix return check for devm_regmap_init_sdw() ASoC: max98373: Fix return check for devm_regmap_init_sdw() ASoC: ti: fixup ams_delta_mute() function name ASoC: pcm3168a: ignore 0 Hz settings ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case ... | 18 September 2020, 18:38:08 UTC |
1fd7965 | Linus Torvalds | 18 September 2020, 18:20:34 UTC | Merge tag 'iommu-fixes-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Two fixes for the AMD IOMMU driver: - Fix a potential NULL-ptr dereference found by smatch - Fix interrupt remapping when a device is assigned to a guest and AVIC is enabled" * tag 'iommu-fixes-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_mode iommu/amd: Fix potential @entry null deref | 18 September 2020, 18:20:34 UTC |
9237393 | Linus Torvalds | 18 September 2020, 18:11:13 UTC | Merge tag 'mtd/fixes-for-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD/SPI NOR fixes from Vignesh Raghavendra: "Revert patches that caused non volatile Quad Enable bit to be cleared for certain SPI NOR flashes during module remove or during shutdown, thus breaking backward compatibility" Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> * tag 'mtd/fixes-for-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: Revert "mtd: spi-nor: Add capability to disable flash quad mode" Revert "mtd: spi-nor: Disable the flash quad mode in spi_nor_restore()" | 18 September 2020, 18:11:13 UTC |
db6c6a0 | Josh Poimboeuf | 10 September 2020, 15:24:57 UTC | objtool: Fix noreturn detection for ignored functions When a function is annotated with STACK_FRAME_NON_STANDARD, objtool doesn't validate its code paths. It also skips sibling call detection within the function. But sibling call detection is actually needed for the case where the ignored function doesn't have any return instructions. Otherwise objtool naively marks the function as implicit static noreturn, which affects the reachability of its callers, resulting in "unreachable instruction" warnings. Fix it by just enabling sibling call detection for ignored functions. The 'insn->ignore' check in add_jump_destinations() is no longer needed after e6da9567959e ("objtool: Don't use ignore flag for fake jumps"). Fixes the following warning: arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.1599751464.git.jpoimboe@redhat.com | 18 September 2020, 17:37:51 UTC |
e8dc676 | Rafael J. Wysocki | 18 September 2020, 15:38:31 UTC | Merge branch 'pm-cpuidle' * pm-cpuidle: ACPI: processor: Take over RCU-idle for C3-BM idle cpuidle: Allow cpuidle drivers to take over RCU-idle ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP | 18 September 2020, 15:38:31 UTC |
a608b6a | Masahiro Yamada | 08 September 2020, 22:16:37 UTC | kconfig: qconf: use delete[] instead of delete to free array (again) Commit c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array") fixed two lines, but there is one more. (cppcheck does not report it for some reason...) This was detected by Clang. "make HOSTCXX=clang++ xconfig" reports the following: scripts/kconfig/qconf.cc:1279:2: warning: 'delete' applied to a pointer that was allocated with 'new[]'; did you mean 'delete[]'? [-Wmismatched-new-delete] delete data; ^ [] scripts/kconfig/qconf.cc:1239:15: note: allocated with 'new[]' here char *data = new char[count + 1]; ^ Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again") Fixes: c9b09a9249e6 ("kconfig: qconf: use delete[] instead of delete to free array") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> | 18 September 2020, 15:12:13 UTC |
e97685a | Suravee Suthikulpanit | 16 September 2020, 11:17:20 UTC | iommu/amd: Restore IRTE.RemapEn bit for amd_iommu_activate_guest_mode Commit e52d58d54a32 ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE") removed an assumption that modify_irte_ga always set the valid bit, which requires the callers to set the appropriate value for the struct irte_ga.valid bit before calling the function. Similar to the commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE"), which is for the function amd_iommu_deactivate_guest_mode(). The same change is also needed for the amd_iommu_activate_guest_mode(). Otherwise, this could trigger IO_PAGE_FAULT for the VFIO based VMs with AVIC enabled. Fixes: e52d58d54a321 ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Cc: Joao Martins <joao.m.martins@oracle.com> Link: https://lore.kernel.org/r/20200916111720.43913-1-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de> | 18 September 2020, 09:17:19 UTC |
14c4acc | Joao Martins | 10 September 2020, 17:16:21 UTC | iommu/amd: Fix potential @entry null deref After commit 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE"), smatch warns: drivers/iommu/amd/iommu.c:3870 amd_iommu_deactivate_guest_mode() warn: variable dereferenced before check 'entry' (see line 3867) Fix this by moving the @valid assignment to after @entry has been checked for NULL. Fixes: 26e495f34107 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20200910171621.12879-1-joao.m.martins@oracle.com Signed-off-by: Joerg Roedel <jroedel@suse.de> | 18 September 2020, 08:35:11 UTC |
6f9885a | Josh Poimboeuf | 14 September 2020, 17:04:22 UTC | x86/unwind/fp: Fix FP unwinding in ret_from_fork There have been some reports of "bad bp value" warnings printed by the frame pointer unwinder: WARNING: kernel stack regs at 000000005bac7112 in sh:1014 has bad 'bp' value 0000000000000000 This warning happens when unwinding from an interrupt in ret_from_fork(). If entry code gets interrupted, the state of the frame pointer (rbp) may be undefined, which can confuse the unwinder, resulting in warnings like the above. There's an in_entry_code() check which normally silences such warnings for entry code. But in this case, ret_from_fork() is getting interrupted. It recently got moved out of .entry.text, so the in_entry_code() check no longer works. It could be moved back into .entry.text, but that would break the noinstr validation because of the call to schedule_tail(). Instead, initialize each new task's RBP to point to the task's entry regs via an encoded frame pointer. That will allow the unwinder to reach the end of the stack gracefully. Fixes: b9f6976bfb94 ("x86/entry/64: Move non entry code into .text section") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/f366bbf5a8d02e2318ee312f738112d0af74d16f.1600103007.git.jpoimboe@redhat.com | 18 September 2020, 07:59:40 UTC |
10b82d5 | Linus Torvalds | 18 September 2020, 01:05:29 UTC | Merge branch 'for-5.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Pull percpu fix from Dennis Zhou: "This is a fix for the first chunk size calculation where the variable length array incorrectly used the number of longs instead of bytes of longs. This came in as a code fix and not a bug report, so I don't think it was widely problematic. I believe it worked out due to it being memblock memory and alignment requirements working in our favor" * 'for-5.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: fix first chunk size calculation for populated bitmap | 18 September 2020, 01:05:29 UTC |
4c0449c | Linus Torvalds | 18 September 2020, 00:46:04 UTC | Merge tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "A bunch of small fixes, some of the i915 ones have been out for a while and got better commit msg explaining some better reasoning behind them (hopefully this trend continues). Otherwise there a few AMD related ones mostly small, one radeon PLL regression fix and a bunch of small mediatek fixes. amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards i915: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function mediatek: - Fix scrolling of panel - Remove duplicated include - Use CPU when fail to get cmdq event - Add missing put_device() call" * tag 'drm-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amd/display: Don't log hdcp module warnings in dmesg drm/amdgpu: declare ta firmware for navy_flounder drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata() drm/mediatek: Add missing put_device() call in mtk_drm_kms_init() drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init() drm/mediatek: Use CPU when fail to get cmdq event drm/mediatek: Remove duplicated include drm/i915: Filter wake_flags passed to default_wake_function drm/i915: Be wary of data races when reading the active execlists drm/i915/gem: Reduce context termination list iteration guard to RCU drm/i915/gem: Delay tracking the GEM context until it is registered drm/amdgpu/dc: Require primary plane to be enabled whenever the CRTC is drm/radeon: revert "Prefer lower feedback dividers" drm/amdgpu: Include sienna_cichlid in USBC PD FW support. drm/amd/display: update nv1x stutter latencies drm/amd/display: Don't use DRM_ERROR() for DTM add topology drm/amd/pm: support runtime pptable update for sienna_cichlid etc. drm/amdkfd: fix a memory leak issue drm/kfd: fix a system crash issue during GPU recovery ... | 18 September 2020, 00:46:04 UTC |
1f08fde | Dave Airlie | 17 September 2020, 22:51:58 UTC | Merge tag 'mediatek-drm-fixes-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.9 1. Fix scrolling of panel 2. Remove duplicated include 3. Use CPU when fail to get cmdq event 4. Add missing put_device() call Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200916231724.30571-1-chunkuang.hu@kernel.org | 17 September 2020, 22:52:06 UTC |
d7261b1 | Dave Airlie | 17 September 2020, 22:37:31 UTC | Merge tag 'drm-intel-fixes-2020-09-17' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc6: - Avoid exposing a partially constructed context - Use RCU instead of mutex for context termination list iteration - Avoid data race reported by KCSAN - Filter wake_flags passed to default_wake_function Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2l8vlj3.fsf@intel.com | 17 September 2020, 22:37:31 UTC |
4b1eded | Dave Airlie | 17 September 2020, 22:06:23 UTC | Merge tag 'amd-drm-fixes-5.9-2020-09-17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-09-17: amdgpu: - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes amdkfd: - Fix a GPU reset crash - Fix a memory leak radeon: - Revert a PLL fix that broke other boards Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043818.3717-1-alexander.deucher@amd.com | 17 September 2020, 22:06:24 UTC |
21653a4 | Hans de Goede | 09 September 2020, 10:32:33 UTC | i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices() Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter. This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> | 17 September 2020, 21:16:59 UTC |
4cbffc4 | Linus Torvalds | 17 September 2020, 18:30:36 UTC | Merge tag 'mips_fixes_5.9_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: "Two small fixes for SNI machines" * tag 'mips_fixes_5.9_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: SNI: Fix spurious interrupts MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT | 17 September 2020, 18:30:36 UTC |
b3b33d3 | Sunghyun Jin | 03 September 2020, 12:41:16 UTC | percpu: fix first chunk size calculation for populated bitmap Variable populated, which is a member of struct pcpu_chunk, is used as a unit of size of unsigned long. However, size of populated is miscounted. So, I fix this minor part. Fixes: 8ab16c43ea79 ("percpu: change the number of pages marked in the first_chunk pop bitmap") Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by: Sunghyun Jin <mcsmonk@gmail.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> | 17 September 2020, 17:34:39 UTC |
5ef64cc | Linus Torvalds | 13 September 2020, 21:05:35 UTC | mm: allow a controlled amount of unfairness in the page lock Commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") made the page locking entirely fair, in that if a waiter came in while the lock was held, the lock would be transferred to the lockers strictly in order. That was intended to finally get rid of the long-reported watchdog failures that involved the page lock under extreme load, where a process could end up waiting essentially forever, as other page lockers stole the lock from under it. It also improved some benchmarks, but it ended up causing huge performance regressions on others, simply because fair lock behavior doesn't end up giving out the lock as aggressively, causing better worst-case latency, but potentially much worse average latencies and throughput. Instead of reverting that change entirely, this introduces a controlled amount of unfairness, with a sysctl knob to tune it if somebody needs to. But the default value should hopefully be good for any normal load, allowing a few rounds of lock stealing, but enforcing the strict ordering before the lock has been stolen too many times. There is also a hint from Matthieu Baerts that the fair page coloring may end up exposing an ABBA deadlock that is hidden by the usual optimistic lock stealing, and while the unfairness doesn't fix the fundamental issue (and I'm still looking at that), it avoids it in practice. The amount of unfairness can be modified by writing a new value to the 'sysctl_page_lock_unfairness' variable (default value of 5, exposed through /proc/sys/vm/page_lock_unfairness), but that is hopefully something we'd use mainly for debugging rather than being necessary for any deep system tuning. This whole issue has exposed just how critical the page lock can be, and how contended it gets under certain locks. And the main contention doesn't really seem to be anything related to IO (which was the origin of this lock), but for things like just verifying that the page file mapping is stable while faulting in the page into a page table. Link: https://lore.kernel.org/linux-fsdevel/ed8442fd-6f54-dd84-cd4a-941e8b7ee603@MichaelLarabel.com/ Link: https://www.phoronix.com/scan.php?page=article&item=linux-50-59&num=1 Link: https://lore.kernel.org/linux-fsdevel/c560a38d-8313-51fb-b1ec-e904bd8836bc@tessares.net/ Reported-and-tested-by: Michael Larabel <Michael@michaellarabel.com> Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 September 2020, 17:26:41 UTC |
75df529 | Andrew Jones | 16 September 2020, 15:45:30 UTC | arm64: paravirt: Initialize steal time when cpu is online Steal time initialization requires mapping a memory region which invokes a memory allocation. Doing this at CPU starting time results in the following trace when CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at mm/slab.h:498 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0-rc5+ #1 Call trace: dump_backtrace+0x0/0x208 show_stack+0x1c/0x28 dump_stack+0xc4/0x11c ___might_sleep+0xf8/0x130 __might_sleep+0x58/0x90 slab_pre_alloc_hook.constprop.101+0xd0/0x118 kmem_cache_alloc_node_trace+0x84/0x270 __get_vm_area_node+0x88/0x210 get_vm_area_caller+0x38/0x40 __ioremap_caller+0x70/0xf8 ioremap_cache+0x78/0xb0 memremap+0x9c/0x1a8 init_stolen_time_cpu+0x54/0xf0 cpuhp_invoke_callback+0xa8/0x720 notify_cpu_starting+0xc8/0xd8 secondary_start_kernel+0x114/0x180 CPU1: Booted secondary processor 0x0000000001 [0x431f0a11] However we don't need to initialize steal time at CPU starting time. We can simply wait until CPU online time, just sacrificing a bit of accuracy by returning zero for steal time until we know better. While at it, add __init to the functions that are only called by pv_time_init() which is __init. Signed-off-by: Andrew Jones <drjones@redhat.com> Fixes: e0685fa228fd ("arm64: Retrieve stolen time as paravirtualized guest") Cc: stable@vger.kernel.org Reviewed-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20200916154530.40809-1-drjones@redhat.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 17 September 2020, 17:12:18 UTC |
9cdabcb | Oliver Neukum | 17 September 2020, 10:34:27 UTC | usblp: fix race between disconnect() and read() read() needs to check whether the device has been disconnected before it tries to talk to the device. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 17 September 2020, 16:45:30 UTC |
32f6865 | Ilias Apalodimas | 17 September 2020, 08:49:25 UTC | arm64: bpf: Fix branch offset in JIT Running the eBPF test_verifier leads to random errors looking like this: [ 6525.735488] Unexpected kernel BRK exception at EL1 [ 6525.735502] Internal error: ptrace BRK handler: f2000100 [#1] SMP [ 6525.741609] Modules linked in: nls_utf8 cifs libdes libarc4 dns_resolver fscache binfmt_misc nls_ascii nls_cp437 vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul efi_pstore sha2_ce sha256_arm64 sha1_ce evdev efivars efivarfs ip_tables x_tables autofs4 btrfs blake2b_generic xor xor_neon zstd_compress raid6_pq libcrc32c crc32c_generic ahci xhci_pci libahci xhci_hcd igb libata i2c_algo_bit nvme realtek usbcore nvme_core scsi_mod t10_pi netsec mdio_devres of_mdio gpio_keys fixed_phy libphy gpio_mb86s7x [ 6525.787760] CPU: 3 PID: 7881 Comm: test_verifier Tainted: G W 5.9.0-rc1+ #47 [ 6525.796111] Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Jun 6 2020 [ 6525.804812] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 6525.810390] pc : bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.815613] lr : bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.820832] sp : ffff8000130cbb80 [ 6525.824141] x29: ffff8000130cbbb0 x28: 0000000000000000 [ 6525.829451] x27: 000005ef6fcbf39b x26: 0000000000000000 [ 6525.834759] x25: ffff8000130cbb80 x24: ffff800011dc7038 [ 6525.840067] x23: ffff8000130cbd00 x22: ffff0008f624d080 [ 6525.845375] x21: 0000000000000001 x20: ffff800011dc7000 [ 6525.850682] x19: 0000000000000000 x18: 0000000000000000 [ 6525.855990] x17: 0000000000000000 x16: 0000000000000000 [ 6525.861298] x15: 0000000000000000 x14: 0000000000000000 [ 6525.866606] x13: 0000000000000000 x12: 0000000000000000 [ 6525.871913] x11: 0000000000000001 x10: ffff8000000a660c [ 6525.877220] x9 : ffff800010951810 x8 : ffff8000130cbc38 [ 6525.882528] x7 : 0000000000000000 x6 : 0000009864cfa881 [ 6525.887836] x5 : 00ffffffffffffff x4 : 002880ba1a0b3e9f [ 6525.893144] x3 : 0000000000000018 x2 : ffff8000000a4374 [ 6525.898452] x1 : 000000000000000a x0 : 0000000000000009 [ 6525.903760] Call trace: [ 6525.906202] bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.911076] bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.915957] bpf_dispatcher_xdp_func+0x14/0x20 [ 6525.920398] bpf_test_run+0x70/0x1b0 [ 6525.923969] bpf_prog_test_run_xdp+0xec/0x190 [ 6525.928326] __do_sys_bpf+0xc88/0x1b28 [ 6525.932072] __arm64_sys_bpf+0x24/0x30 [ 6525.935820] el0_svc_common.constprop.0+0x70/0x168 [ 6525.940607] do_el0_svc+0x28/0x88 [ 6525.943920] el0_sync_handler+0x88/0x190 [ 6525.947838] el0_sync+0x140/0x180 [ 6525.951154] Code: d4202000 d4202000 d4202000 d4202000 (d4202000) [ 6525.957249] ---[ end trace cecc3f93b14927e2 ]--- The reason is the offset[] creation and later usage, while building the eBPF body. The code currently omits the first instruction, since build_insn() will increase our ctx->idx before saving it. That was fine up until bounded eBPF loops were introduced. After that introduction, offset[0] must be the offset of the end of prologue which is the start of the 1st insn while, offset[n] holds the offset of the end of n-th insn. When "taken loop with back jump to 1st insn" test runs, it will eventually call bpf2a64_offset(-1, 2, ctx). Since negative indexing is permitted, the current outcome depends on the value stored in ctx->offset[-1], which has nothing to do with our array. If the value happens to be 0 the tests will work. If not this error triggers. commit 7c2e988f400e ("bpf: fix x64 JIT code generation for jmp to 1st insn") fixed an indentical bug on x86 when eBPF bounded loops were introduced. So let's fix it by creating the ctx->offset[] differently. Track the beginning of instruction and account for the extra instruction while calculating the arm instruction offsets. Fixes: 2589726d12a1 ("bpf: introduce bounded loops") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Jiri Olsa <jolsa@kernel.org> Co-developed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Co-developed-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200917084925.177348-1-ilias.apalodimas@linaro.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 17 September 2020, 11:05:36 UTC |
2923182 | Quentin Perret | 16 September 2020, 17:18:25 UTC | ehci-hcd: Move include to keep CRC stable The CRC calculation done by genksyms is triggered when the parser hits EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the types of the function parameters, and uses that as the input for the CRC calculation. In the case of forward-declared structs, the type expands to 'UNKNOWN'. Following this, it appears that the result of the expansion of each type is cached somewhere, and seems to be re-used when/if the same type is seen again for another exported symbol in the same C file. Unfortunately, this can cause CRC 'stability' issues when a struct definition becomes visible in the middle of a C file. For example, let's assume code with the following pattern: struct foo; int bar(struct foo *arg) { /* Do work ... */ } EXPORT_SYMBOL_GPL(bar); /* This contains struct foo's definition */ #include "foo.h" int baz(struct foo *arg) { /* Do more work ... */ } EXPORT_SYMBOL_GPL(baz); Here, baz's CRC will be computed using the expansion of struct foo that was cached after bar's CRC calculation ('UNKOWN' here). But if EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded late, during baz's CRC calculation, which now has visibility over the full struct definition, hence resulting in a different CRC for baz. The proper fix for this certainly is in genksyms, but that will take me some time to get right. In the meantime, we have seen one occurrence of this in the ehci-hcd code which hits this problem because of the way it includes C files halfway through the code together with an unlucky mix of symbol trimming. In order to workaround this, move the include done in ehci-hub.c early in ehci-hcd.c, hence making sure the struct definitions are visible to the entire file. This improves CRC stability of the ehci-hcd exports even when symbol trimming is enabled. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 17 September 2020, 06:39:50 UTC |
875d369 | Bhawanpreet Lakha | 15 September 2020, 21:26:29 UTC | drm/amd/display: Don't log hdcp module warnings in dmesg [Why] DTM topology updates happens by default now. This results in DTM warnings when hdcp is not even being enabled. This spams the dmesg and doesn't effect normal display functionality so it is better to log it using DRM_DEBUG_KMS() [How] Change the DRM_WARN() to DRM_DEBUG_KMS() Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 17 September 2020, 04:13:34 UTC |
e60c27f | Jiansong Chen | 16 September 2020, 11:17:20 UTC | drm/amdgpu: declare ta firmware for navy_flounder The firmware provided via MODULE_FIRMWARE appears in the module information. External tools(eg. dracut) may use the list of fw files to include them as appropriate in an initramfs, thus missing declaration will lead to request firmware failure in boot time. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tianci Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 17 September 2020, 04:12:36 UTC |
0680a62 | Yu Kuai | 11 September 2020, 11:21:51 UTC | drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata() if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> | 16 September 2020, 22:58:01 UTC |
2132940 | Yu Kuai | 11 September 2020, 11:21:19 UTC | drm/mediatek: Add missing put_device() call in mtk_drm_kms_init() if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have a corresponding put_device(). Thus add jump target to fix the exception handling for this function implementation. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> | 16 September 2020, 22:58:01 UTC |
64c194c | Yu Kuai | 09 September 2020, 08:49:42 UTC | drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it fail, previous successive init component is not proccessed. Thus uninitialize valid component and put their device if component init failed. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> | 16 September 2020, 22:58:01 UTC |
d494c25 | Yu Kuai | 05 September 2020, 08:30:58 UTC | drm/mediatek: Add missing put_device() call in mtk_ddp_comp_init() if of_find_device_by_node() succeed, mtk_ddp_comp_init() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: d0afe37f5209 ("drm/mediatek: support CMDQ interface in ddp component") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> | 16 September 2020, 22:58:01 UTC |
f85acda | Chun-Kuang Hu | 31 August 2020, 23:39:52 UTC | drm/mediatek: Use CPU when fail to get cmdq event Even though cmdq client is created successfully, without the cmdq event, cmdq could not work correctly, so use CPU when fail to get cmdq event. Fixes: 60fa8c13ab1a ("drm/mediatek: Move gce event property to mutex device node") Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> | 16 September 2020, 22:58:01 UTC |
855f3e0 | Wang Hai | 19 August 2020, 02:58:29 UTC | drm/mediatek: Remove duplicated include Remove mtk_drm_ddp.h which is included more than once Fixes: 9aef5867c86c ("drm/mediatek: drop use of drmP.h") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> | 16 September 2020, 22:57:28 UTC |
b959b97 | Thomas Bogendoerfer | 16 September 2020, 13:54:37 UTC | MIPS: SNI: Fix spurious interrupts On A20R machines the interrupt pending bits in cause register need to be updated by requesting the chipset to do it. This needs to be done to find the interrupt cause and after interrupt service. In commit 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions") the function to do after service update got lost, which caused spurious interrupts. Fixes: 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> | 16 September 2020, 20:40:58 UTC |
5925fa6 | Linus Torvalds | 16 September 2020, 19:00:16 UTC | Merge tag 'perf-tools-fixes-for-v5.9-2020-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Set PERF_SAMPLE_PERIOD if attr->freq is set. - Remove trailing commas from AMD JSON vendor event files. - Don't clear event's period if set by a event definition term. - Leader sampling shouldn't clear sample period in 'perf test'. - Fix the "signal" test inline assembly when built with DEBUG=1. - Fix memory leaks detected by ASAN, some in normal paths, some in error paths. - Fix 2 memory sanitizer warnings in 'perf bench'. - Fix the ratio comments of miss-events in 'perf stat'. - Prevent override of attr->sample_period for libpfm4 events. - Sync kvm.h and in.h headers with the kernel sources. * tag 'perf-tools-fixes-for-v5.9-2020-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf stat: Fix the ratio comments of miss-events perf test: Free formats for perf pmu parse test perf metric: Do not free metric when failed to resolve perf metric: Free metric when it failed to resolve perf metric: Release expr_parse_ctx after testing perf test: Fix memory leaks in parse-metric test perf parse-event: Fix memory leak in evsel->unit perf evlist: Fix cpu/thread map leak perf metric: Fix some memory leaks - part 2 perf metric: Fix some memory leaks perf test: Free aliases for PMU event map aliases test perf vendor events amd: Remove trailing commas perf test: Leader sampling shouldn't clear sample period perf record: Don't clear event's period if set by a term tools headers UAPI: update linux/in.h copy tools headers UAPI: Sync kvm.h headers with the kernel sources perf record: Prevent override of attr->sample_period for libpfm4 events perf record: Set PERF_RECORD_PERIOD if attr->freq is set. perf bench: Fix 2 memory sanitizer warnings perf test: Fix the "signal" test inline assembly | 16 September 2020, 19:00:16 UTC |
05da40e | Linus Torvalds | 16 September 2020, 18:52:56 UTC | Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: "A handful of clk driver fixes. Mostly they're for error paths or improper memory allocations sizes. Nothing as exciting as a wildfire" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: lpass: Correct goto target in lpass_core_sc7180_probe() clk: versatile: Add of_node_put() before return statement clk: bcm: dvp: Select the reset framework clk: rockchip: Fix initialization of mux_pll_src_4plls_p clk: davinci: Use the correct size when allocating memory | 16 September 2020, 18:52:56 UTC |
6279e77 | Leon Romanovsky | 15 September 2020, 08:27:41 UTC | MAINTAINERS: Fix Max's and Shravan's emails Max's and Shravan's usernames were changed while @mellanox.com emails were transferred to be @nvidia.com. Fixes: f6da70d99c96 ("MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 September 2020, 18:51:02 UTC |
1fecfdb | Peter Zijlstra | 15 September 2020, 10:32:01 UTC | ACPI: processor: Take over RCU-idle for C3-BM idle The C3 BusMaster idle code takes lock in a number of places, some deep inside the ACPI code. Instead of wrapping it all in RCU_NONIDLE, have the driver take over RCU-idle duty and avoid flipping RCU state back and forth a lot. ( by marking 'C3 && bm_check' as RCU_IDLE, we _must_ call enter_bm() for that combination, otherwise we'll loose RCU-idle, this requires shuffling some code around ) Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 16 September 2020, 17:36:26 UTC |
8747f20 | Peter Zijlstra | 15 September 2020, 10:32:00 UTC | cpuidle: Allow cpuidle drivers to take over RCU-idle Some drivers have to do significant work, some of which relies on RCU still being active. Instead of using RCU_NONIDLE in the drivers and flipping RCU back on, allow drivers to take over RCU-idle duty. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 16 September 2020, 17:36:26 UTC |
a889a23 | Peter Zijlstra | 15 September 2020, 10:31:59 UTC | ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED Make acpi_processor_idle() use the generic TLB flushing code. This again removes RCU usage after rcu_idle_enter(). (XXX make every C3 invalidate TLBs, not just C3-BM) Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 16 September 2020, 17:36:25 UTC |
aa6b43d | Peter Zijlstra | 15 September 2020, 10:31:58 UTC | ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP Make acpi_processor_idle use the common broadcast code, there's no reason not to. This also removes some RCU usage after rcu_idle_enter(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 16 September 2020, 17:36:25 UTC |
e6b1a44 | Hou Tao | 15 September 2020, 14:07:50 UTC | locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count The __this_cpu*() accessors are (in general) IRQ-unsafe which, given that percpu-rwsem is a blocking primitive, should be just fine. However, file_end_write() is used from IRQ context and will cause load-store issues on architectures where the per-cpu accessors are not natively irq-safe. Fix it by using the IRQ-safe this_cpu_*() for operations on read_count. This will generate more expensive code on a number of platforms, which might cause a performance regression for some of the other percpu-rwsem users. If any such is reported, we can consider alternative solutions. Fixes: 70fe2f48152e ("aio: fix freeze protection of aio writes") Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lkml.kernel.org/r/20200915140750.137881-1-houtao1@huawei.com | 16 September 2020, 14:26:56 UTC |
ce9c13f | Qi Liu | 16 September 2020, 10:48:51 UTC | perf stat: Fix the ratio comments of miss-events 'perf stat' displays miss ratio of L1-dcache, L1-icache, dTLB cache, iTLB cache and LL-cache. Take L1-dcache for example, miss ratio is caculated as "L1-dcache-load-misses/L1-dcache-loads". So "of all L1-dcache hits" is unsuitable to describe it, and "of all L1-dcache accesses" seems better. The comments of L1-icache, dTLB cache, iTLB cache and LL-cache are fixed in the same way. Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: linuxarm@huawei.com Link: http://lore.kernel.org/lkml/1600253331-10535-1-git-send-email-liuqi115@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 16 September 2020, 13:54:02 UTC |
ec0972a | Tetsuo Handa | 10 September 2020, 22:57:06 UTC | fbcon: Fix user font detection test at fbcon_resize(). syzbot is reporting OOB read at fbcon_resize() [1], for commit 39b3cffb8cf31117 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") is by error using registered_fb[con2fb_map[vc->vc_num]]->fbcon_par->p->userfont (which was set to non-zero) instead of fb_display[vc->vc_num].userfont (which remains zero for that display). We could remove tricky userfont flag [2], for we can determine it by comparing address of the font data and addresses of built-in font data. But since that commit is failing to fix the original OOB read [3], this patch keeps the change minimal in case we decide to revert altogether. [1] https://syzkaller.appspot.com/bug?id=ebcbbb6576958a496500fee9cf7aa83ea00b5920 [2] https://syzkaller.appspot.com/text?tag=Patch&x=14030853900000 [3] https://syzkaller.appspot.com/bug?id=6fba8c186d97cf1011ab17660e633b1cc4e080c9 Reported-by: syzbot <syzbot+b38b1ef6edf0c74a8d97@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 39b3cffb8cf31117 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access") Cc: George Kennedy <george.kennedy@oracle.com> Link: https://lore.kernel.org/r/f6e3e611-8704-1263-d163-f52c906a4f06@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 16 September 2020, 12:35:51 UTC |
e1c2d96 | Ricardo Neri | 21 August 2020, 18:48:10 UTC | powercap: RAPL: Add support for Lakefield Simply add Lakefield model ID. No additional changes are needed. Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> [ rjw: Minor subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 16 September 2020, 12:16:04 UTC |
3c5a87b | Tobias Diedrich | 14 September 2020, 17:36:28 UTC | serial: 8250_pci: Add Realtek 816a and 816b These serial ports are exposed by the OOB-management-engine on RealManage-enabled network cards (e.g. AMD DASH enabled systems using Realtek cards). Because these have 3 BARs, they fail the "num_iomem <= 1" check in serial_pci_guess_board. I've manually checked the two IOMEM regions and BAR 2 doesn't seem to respond to reads, but BAR 4 seems to be an MMIO version of the IO ports (untested). With this change, the ports are detected: 0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A 0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A lspci output: 02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550]) Subsystem: 17aa:5082 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 82 IOMMU group: 11 Region 0: I/O ports at 2200 [size=256] Region 2: Memory at fd715000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fd704000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data Not readable Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [170 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [178 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=150us PortTPowerOnTime=150us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us 02:00.2 0700: 10ec:816b (rev 0e) [...same...] Signed-off-by: Tobias Diedrich <tobiasdiedrich@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 16 September 2020, 11:23:33 UTC |
e0830db | Johan Hovold | 09 September 2020, 14:31:01 UTC | serial: core: fix console port-lock regression Fix the port-lock initialisation regression introduced by commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") by making sure that the lock is again initialised during console setup. The console may be registered before the serial controller has been probed in which case the port lock needs to be initialised during console setup by a call to uart_set_options(). The console-detach changes introduced a regression in several drivers by effectively removing that initialisation by not initialising the lock when the port is used as a console (which is always the case during console setup). Add back the early lock initialisation and instead use a new console-reinit flag to handle the case where a console is being re-attached through sysfs. The question whether the console-detach interface should have been added in the first place is left for another discussion. Note that the console-enabled check in uart_set_options() is not redundant because of kgdboc, which can end up reinitialising an already enabled console (see commit 42b6a1baa3ec ("serial_core: Don't re-initialize a previously initialized spinlock.")). Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable <stable@vger.kernel.org> # 5.7 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200909143101.15389-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 16 September 2020, 11:22:44 UTC |
fe88c64 | Johan Hovold | 09 September 2020, 14:31:00 UTC | serial: core: fix port-lock initialisation Commit f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()") tried to work around a breakage introduced by commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") by adding a second initialisation of the port lock when registering the port. As reported by the build robots [1], this doesn't really solve the regression introduced by the console-detach changes and also adds a second redundant initialisation of the lock for normal ports. Start cleaning up this mess by removing the redundant initialisation and making sure that the port lock is again initialised once-only for ports that aren't already in use as a console. [1] https://lore.kernel.org/r/20200802054852.GR23458@shao2-debian Fixes: f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()") Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Cc: stable <stable@vger.kernel.org> # 5.7 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200909143101.15389-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 16 September 2020, 11:22:10 UTC |
d69030c | Madhusudanarao Amara | 16 September 2020, 09:11:02 UTC | usb: typec: intel_pmc_mux: Handle SCU IPC error conditions Check and return if there are errors. The response bits are valid only on no errors. Fixes: b7404a29cd3d ("usb: typec: intel_pmc_mux: Definitions for response status bits") Signed-off-by: Madhusudanarao Amara <madhusudanarao.amara@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200916091102.27118-4-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 16 September 2020, 11:09:31 UTC |
bcea6da | Penghao | 07 September 2020, 02:30:26 UTC | USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook. This notebook come with usb touchpad. And we would like to disable touchpad wakeup on this notebook by default. Signed-off-by: Penghao <penghao@uniontech.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 16 September 2020, 11:08:18 UTC |
325b008 | Oliver Neukum | 16 September 2020, 09:40:25 UTC | USB: UAS: fix disconnect by unplugging a hub The SCSI layer can go into an ugly loop if you ignore that a device is gone. You need to report an error in the command rather than in the return value of the queue method. We need to specifically check for ENODEV. The issue goes back to the introduction of the driver. Fixes: 115bb1ffa54c3 ("USB: Add UAS driver") Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200916094026.30085-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 16 September 2020, 10:35:14 UTC |
386e15a | Heikki Krogerus | 16 September 2020, 09:00:34 UTC | usb: typec: ucsi: Prevent mode overrun Sometimes the embedded controller firmware does not terminate the list of alternate modes that the partner supports in its response to the GET_ALTERNATE_MODES command. Instead the firmware returns the supported alternate modes over and over again until the driver stops requesting them. If that happens, the number of modes for each alternate mode will exceed the maximum 6 that is defined in the USB Power Delivery specification. Making sure that can't happen by adding a check for it. This fixes NULL pointer dereference that is caused by the overrun. Fixes: ad74b8649beaf ("usb: typec: ucsi: Preliminary support for alternate modes") Cc: stable@vger.kernel.org Reported-by: Zwane Mwaikambo <zwanem@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200916090034.25119-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 16 September 2020, 10:34:10 UTC |
130a96d | Heikki Krogerus | 16 September 2020, 09:00:33 UTC | usb: typec: ucsi: acpi: Increase command completion timeout value UCSI specification quite clearly states that if a command can't be completed in 10ms, the firmware must notify about BUSY condition. Unfortunately almost none of the platforms (the firmware on them) generate the BUSY notification even if a command can't be completed in time. The driver already considered that, and used a timeout value of 5 seconds, but processing especially the alternate mode discovery commands takes often considerable amount of time from the firmware, much more than the 5 seconds. That happens especially after bootup when devices are already connected to the USB Type-C connector. For now on those platforms the alternate mode discovery has simply failed because of the timeout. To improve the situation, increasing the timeout value for the command completion to 1 minute. That should give enough time for even the slowest firmware to process the commands. Fixes: f56de278e8ec ("usb: typec: ucsi: acpi: Move to the new API") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200916090034.25119-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 16 September 2020, 10:34:03 UTC |
2061230 | Chris Wilson | 28 July 2020, 15:21:44 UTC | drm/i915: Filter wake_flags passed to default_wake_function (NOTE: This is the minimal backportable fix, a full fix is being developed at https://patchwork.freedesktop.org/patch/388048/) The flags passed to the wait_entry.func are passed onwards to try_to_wake_up(), which has a very particular interpretation for its wake_flags. In particular, beyond the published WF_SYNC, it has a few internal flags as well. Since we passed the fence->error down the chain via the flags argument, these ended up in the default_wake_function confusing the kernel/sched. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110 Fixes: ef4688497512 ("drm/i915: Propagate fence errors") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Joonas: Rebased and reordered into drm-intel-gt-next branch] [Joonas: Added a note and link about more complete fix] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit f4b3c395540aa3d4f5a6275c5bdd83ab89034806) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 16 September 2020, 08:10:05 UTC |
b82a8b9 | Chris Wilson | 16 July 2020, 14:22:06 UTC | drm/i915: Be wary of data races when reading the active execlists To implement preempt-to-busy (and so efficient timeslicing and best utilization of the hardware submission ports) we let the GPU run asynchronously in respect to the ELSP submission queue. This created challenges in keeping and accessing the driver state mirroring the asynchronous GPU execution. The latest occurence of this was spotted by KCSAN: [ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915] [ 1413.563221] [ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1: [ 1413.563548] __await_execution+0x217/0x370 [i915] [ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915] [ 1413.564235] i915_request_await_object+0x421/0x490 [i915] [ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915] [ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915] [ 1413.564998] drm_ioctl_kernel+0x156/0x1b0 [ 1413.565022] drm_ioctl+0x2ff/0x480 [ 1413.565046] __x64_sys_ioctl+0x87/0xd0 [ 1413.565069] do_syscall_64+0x4d/0x80 [ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To complicate matters, we have to both avoid the read tearing of *active and avoid any write tearing as perform the pending[] -> inflight[] promotion of the execlists. This is because we cannot rely on the memcpy doing u64 aligned copies on all kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE annotations to satisfy KCSAN. v2: When in doubt, write the same comment again. v3: Expanded commit message. Fixes: b55230e5e800 ("drm/i915: Check for awaits on still currently executing requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Joonas: Rebased and reordered into drm-intel-gt-next branch] [Joonas: Added expanded commit message from Tvrtko and Chris] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit b4d9145b0154f8c71dafc2db5fd445f1f3db9426) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 16 September 2020, 08:09:51 UTC |
c2314b8 | Chris Wilson | 06 August 2020, 10:59:54 UTC | drm/i915/gem: Reduce context termination list iteration guard to RCU As we now protect the timeline list using RCU, we can drop the timeline->mutex for guarding the list iteration during context close, as we are searching for an inflight request. Any new request will see the context is banned and not be submitted. In doing so, pull the checks for a concurrent submission of the request (notably the i915_request_completed()) under the engine spinlock, to fully serialise with __i915_request_submit()). That is in the case of preempt-to-busy where the request may be completed during the __i915_request_submit(), we need to be careful that we sample the request status after serialising so that we don't miss the request the engine is actually submitting. Fixes: 4a3174152147 ("drm/i915/gem: Refine occupancy test in kill_context()") References: d22d2d073ef8 ("drm/i915: Protect i915_request_await_start from early waits") # rcu protection of timeline->requests References: https://gitlab.freedesktop.org/drm/intel/-/issues/1622 References: https://gitlab.freedesktop.org/drm/intel/-/issues/2158 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200806105954.7766-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 736e785f9b28cd9ef2d16a80960a04fd00e64b22) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 16 September 2020, 08:09:43 UTC |