0cf352e | Heinz Mauelshagen | 13 July 2017, 15:34:24 UTC | dm raid: avoid mddev->suspended access Use runtime flag to ensure that an mddev gets suspended/resumed just once. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 25 July 2017, 18:54:19 UTC |
f4af3f8 | Heinz Mauelshagen | 13 July 2017, 15:36:12 UTC | dm raid: fix activation check in validate_raid_redundancy() During growing reshapes (i.e. stripes being added to a raid set), the new stripe images are not in-sync and not part of the raid set until the reshape is started. LVM2 has to request multiple table reloads involving superblock updates in order to reflect proper size of SubLVs in the cluster. Before a stripe adding reshape starts, validate_raid_redundancy() fails as a result of that because it checks the total number of devices against the number of rebuild ones rather than the actual ones in the raid set (as retrieved from the superblock) thus resulting in failed raid4/5/6/10 redundancy checks. E.g. convert 3 stripes -> 7 stripes raid5 (which only allows for maximum 1 device to fail) requesting +4 delta disks causing 4 devices to rebuild during reshaping thus failing activation. To fix this, move validate_raid_redundancy() to get access to the current raid_set members. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 25 July 2017, 18:54:19 UTC |
bbac1e0 | Heinz Mauelshagen | 13 July 2017, 15:33:22 UTC | dm raid: remove WARN_ON() in raid10_md_layout_to_format() Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 25 July 2017, 18:54:18 UTC |
edc11d4 | Dan Carpenter | 12 July 2017, 07:26:34 UTC | dm bufio: fix error code in dm_bufio_write_dirty_buffers() We should be returning normal negative error codes here. The "a" variables comes from &c->async_write_error which is a blk_status_t converted to a regular error code. In the current code, the blk_status_t gets propogated back to pool_create() and eventually results in an Oops. Fixes: 4e4cbee93d56 ("block: switch bios to blk_status_t") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 25 July 2017, 14:11:15 UTC |
bc86a41 | Mikulas Patocka | 21 July 2017, 15:58:38 UTC | dm integrity: test for corrupted disk format during table load If the dm-integrity superblock was corrupted in such a way that the journal_sections field was zero, the integrity target would deadlock because it would wait forever for free space in the journal. Detect this situation and refuse to activate the device. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: 7eada909bfd7 ("dm: add integrity target") Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 25 July 2017, 14:11:14 UTC |
aa03a91 | Mikulas Patocka | 21 July 2017, 17:16:06 UTC | dm integrity: WARN_ON if variables representing journal usage get out of sync If this WARN_ON triggers it speaks to programmer error, and likely implies corruption, but no released kernel should trigger it. This WARN_ON serves to assist DM integrity developers as changes are made/tested in the future. BUG_ON is excessive for catching programmer error, if a user or developer would like warnings to trigger a panic, they can enable that via /proc/sys/kernel/panic_on_warn Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 25 July 2017, 14:11:13 UTC |
a7c3e62 | Mikulas Patocka | 19 July 2017, 15:24:08 UTC | dm integrity: use plugging when writing the journal When copying data from the journal to the appropriate place, we submit many IOs. Some of these IOs could go to adjacent areas. Use on-stack plugging so that adjacent IOs get merged during submission. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 19 July 2017, 23:02:39 UTC |
9dd5972 | Mikulas Patocka | 19 July 2017, 15:23:40 UTC | dm integrity: fix inefficient allocation of journal space When using a block size greater than 512 bytes, the dm-integrity target allocates journal space inefficiently. It allocates one journal entry for each 512-byte chunk of data, fills an entry for each block of data and leaves the remaining entries unused. This issue doesn't cause data corruption, but all the unused journal entries degrade performance severely. For example, with 4k blocks and an 8k bio, it would allocate 16 journal entries but only use 2 entries. The remaining 14 entries were left unused. Fix this by adding the missing 'log2_sectors_per_block' shifts that are required to have each journal entry map to a full block. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: 7eada909bfd7 ("dm: add integrity target") Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 19 July 2017, 22:44:18 UTC |
5771a8c | Linus Torvalds | 15 July 2017, 22:22:10 UTC | Linux v4.13-rc1 | 15 July 2017, 22:22:10 UTC |
486088b | Linus Torvalds | 15 July 2017, 19:58:58 UTC | Merge tag 'standardize-docs' of git://git.lwn.net/linux Pull documentation format standardization from Jonathan Corbet: "This series converts a number of top-level documents to the RST format without incorporating them into the Sphinx tree. The hope is to bring some uniformity to kernel documentation and, perhaps more importantly, have our existing docs serve as an example of the desired formatting for those that will be added later. Mauro has gone through and fixed up a lot of top-level documentation files to make them conform to the RST format, but without moving or renaming them in any way. This will help when we incorporate the ones we want to keep into the Sphinx doctree, but the real purpose is to bring a bit of uniformity to our documentation and let the top-level docs serve as examples for those writing new ones" * tag 'standardize-docs' of git://git.lwn.net/linux: (84 commits) docs: kprobes.txt: Fix whitespacing tee.txt: standardize document format cgroup-v2.txt: standardize document format dell_rbu.txt: standardize document format zorro.txt: standardize document format xz.txt: standardize document format xillybus.txt: standardize document format vfio.txt: standardize document format vfio-mediated-device.txt: standardize document format unaligned-memory-access.txt: standardize document format this_cpu_ops.txt: standardize document format svga.txt: standardize document format static-keys.txt: standardize document format smsc_ece1099.txt: standardize document format SM501.txt: standardize document format siphash.txt: standardize document format sgi-ioc4.txt: standardize document format SAK.txt: standardize document format rpmsg.txt: standardize document format robust-futexes.txt: standardize document format ... | 15 July 2017, 19:58:58 UTC |
52f6c58 | Linus Torvalds | 15 July 2017, 19:44:02 UTC | Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random updates from Ted Ts'o: "Add wait_for_random_bytes() and get_random_*_wait() functions so that callers can more safely get random bytes if they can block until the CRNG is initialized. Also print a warning if get_random_*() is called before the CRNG is initialized. By default, only one single-line warning will be printed per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a warning will be printed for each function which tries to get random bytes before the CRNG is initialized. This can get spammy for certain architecture types, so it is not enabled by default" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: reorder READ_ONCE() in get_random_uXX random: suppress spammy warnings about unseeded randomness random: warn when kernel uses unseeded randomness net/route: use get_random_int for random counter net/neighbor: use get_random_u32 for 32-bit hash random rhashtable: use get_random_u32 for hash_rnd ceph: ensure RNG is seeded before using iscsi: ensure RNG is seeded before use cifs: use get_random_u32 for 32-bit lock random random: add get_random_{bytes,u32,u64,int,long,once}_wait family random: add wait_for_random_bytes() API | 15 July 2017, 19:44:02 UTC |
78dcf73 | Linus Torvalds | 15 July 2017, 19:00:42 UTC | Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ->s_options removal from Al Viro: "Preparations for fsmount/fsopen stuff (coming next cycle). Everything gets moved to explicit ->show_options(), killing ->s_options off + some cosmetic bits around fs/namespace.c and friends. Basically, the stuff needed to work with fsmount series with minimum of conflicts with other work. It's not strictly required for this merge window, but it would reduce the PITA during the coming cycle, so it would be nice to have those bits and pieces out of the way" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: isofs: Fix isofs_show_options() VFS: Kill off s_options and helpers orangefs: Implement show_options 9p: Implement show_options isofs: Implement show_options afs: Implement show_options affs: Implement show_options befs: Implement show_options spufs: Implement show_options bpf: Implement show_options ramfs: Implement show_options pstore: Implement show_options omfs: Implement show_options hugetlbfs: Implement show_options VFS: Don't use save/replace_mount_options if not using generic_show_options VFS: Provide empty name qstr VFS: Make get_filesystem() return the affected filesystem VFS: Clean up whitespace in fs/namespace.c and fs/super.c Provide a function to create a NUL-terminated string from unterminated data | 15 July 2017, 19:00:42 UTC |
93ff818 | Linus Torvalds | 15 July 2017, 18:47:27 UTC | Merge branch 'work.__copy_to_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more __copy_.._user elimination from Al Viro. * 'work.__copy_to_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: drm_dp_aux_dev: switch to read_iter/write_iter | 15 July 2017, 18:47:27 UTC |
89cbec7 | Linus Torvalds | 15 July 2017, 18:17:52 UTC | Merge branch 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull uacess-unaligned removal from Al Viro: "That stuff had just one user, and an exotic one, at that - binfmt_flat on arm and m68k" * 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill {__,}{get,put}_user_unaligned() binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail | 15 July 2017, 18:17:52 UTC |
2173bd0 | Linus Torvalds | 15 July 2017, 18:06:17 UTC | Merge branch 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull network field-by-field copy-in updates from Al Viro: "This part of the misc compat queue was held back for review from networking folks and since davem has jus ACKed those..." * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: get_compat_bpf_fprog(): don't copyin field-by-field get_compat_msghdr(): get rid of field-by-field copyin copy_msghdr_from_user(): get rid of field-by-field copyin | 15 July 2017, 18:06:17 UTC |
568d135 | Linus Torvalds | 15 July 2017, 17:59:54 UTC | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ... | 15 July 2017, 17:59:54 UTC |
4ecd4ff | Linus Torvalds | 15 July 2017, 17:49:33 UTC | Merge branch 'for-linus-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: "Mostly fixes for UML: - First round of fixes for PTRACE_GETRESET/SETREGSET - A printf vs printk cleanup - Minor improvements" * 'for-linus-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Correctly check for PTRACE_GETRESET/SETREGSET um: v2: Use generic NOTES macro um: Add kerneldoc for userspace_tramp() and start_userspace() um: Add kerneldoc for segv_handler um: stub-data.h: remove superfluous include um: userspace - be more verbose in ptrace set regs error um: add dummy ioremap and iounmap functions um: Allow building and running on older hosts um: Avoid longjmp/setjmp symbol clashes with libpthread.a um: console: Ignore console= option um: Use os_warn to print out pre-boot warning/error messages um: Add os_warn() for pre-boot warning/error messages um: Use os_info for the messages on normal path um: Add os_info() for pre-boot information messages um: Use printk instead of printf in make_uml_dir | 15 July 2017, 17:49:33 UTC |
966859b | Linus Torvalds | 15 July 2017, 17:46:14 UTC | Merge tag 'upstream-4.13-rc1' of git://git.infradead.org/linux-ubifs Pull UBIFS updates from Richard Weinberger: - Updates and fixes for the file encryption mode - Minor improvements - Random fixes * tag 'upstream-4.13-rc1' of git://git.infradead.org/linux-ubifs: ubifs: Set double hash cookie also for RENAME_EXCHANGE ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs ubifs: Don't leak kernel memory to the MTD ubifs: Change gfp flags in page allocation for bulk read ubifs: Fix oops when remounting with no_bulk_read. ubifs: Fail commit if TNC is obviously inconsistent ubifs: allow userspace to map mounts to volumes ubifs: Wire-up statx() support ubifs: Remove dead code from ubifs_get_link() ubifs: Massage debug prints wrt. fscrypt ubifs: Add assert to dent_key_init() ubifs: Fix unlink code wrt. double hash lookups ubifs: Fix data node size for truncating uncompressed nodes ubifs: Don't encrypt special files on creation ubifs: Fix memory leak in RENAME_WHITEOUT error path in do_rename ubifs: Fix inode data budget in ubifs_mknod ubifs: Correctly evict xattr inodes ubifs: Unexport ubifs_inode_slab ubifs: don't bother checking for encryption key in ->mmap() ubifs: require key for truncate(2) of encrypted file | 15 July 2017, 17:46:14 UTC |
e37a07e | Linus Torvalds | 15 July 2017, 17:18:16 UTC | Merge tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more KVM updates from Radim Krčmář: "Second batch of KVM updates for v4.13 Common: - add uevents for VM creation/destruction - annotate and properly access RCU-protected objects s390: - rename IOCTL added in the first v4.13 merge x86: - emulate VMLOAD VMSAVE feature in SVM - support paravirtual asynchronous page fault while nested - add Hyper-V userspace interfaces for better migration - improve master clock corner cases - extend internal error reporting after EPT misconfig - correct single-stepping of emulated instructions in SVM - handle MCE during VM entry - fix nVMX VM entry checks and nVMX VMCS shadowing" * tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: x86: hyperv: make VP_INDEX managed by userspace KVM: async_pf: Let guest support delivery of async_pf from guest mode KVM: async_pf: Force a nested vmexit if the injected #PF is async_pf KVM: async_pf: Add L1 guest async_pf #PF vmexit handler KVM: x86: Simplify kvm_x86_ops->queue_exception parameter list kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2 KVM: x86: make backwards_tsc_observed a per-VM variable KVM: trigger uevents when creating or destroying a VM KVM: SVM: Enable Virtual VMLOAD VMSAVE feature KVM: SVM: Add Virtual VMLOAD VMSAVE feature definition KVM: SVM: Rename lbr_ctl field in the vmcb control area KVM: SVM: Prepare for new bit definition in lbr_ctl KVM: SVM: handle singlestep exception when skipping emulated instructions KVM: x86: take slots_lock in kvm_free_pit KVM: s390: Fix KVM_S390_GET_CMMA_BITS ioctl definition kvm: vmx: Properly handle machine check during VM-entry KVM: x86: update master clock before computing kvmclock_offset kvm: nVMX: Shadow "high" parts of shadowed 64-bit VMCS fields kvm: nVMX: Fix nested_vmx_check_msr_bitmap_controls kvm: nVMX: Validate the I/O bitmaps on nested VM-entry ... | 15 July 2017, 17:18:16 UTC |
72e5c74 | Sebastian Andrzej Siewior | 30 June 2017, 14:37:13 UTC | random: reorder READ_ONCE() in get_random_uXX Avoid the READ_ONCE in commit 4a072c71f49b ("random: silence compiler warnings and fix race") if we can leave the function after arch_get_random_XXX(). Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 15 July 2017, 16:33:22 UTC |
eecabf5 | Theodore Ts'o | 08 June 2017, 08:16:59 UTC | random: suppress spammy warnings about unseeded randomness Unfortunately, on some models of some architectures getting a fully seeded CRNG is extremely difficult, and so this can result in dmesg getting spammed for a surprisingly long time. This is really bad from a security perspective, and so architecture maintainers really need to do what they can to get the CRNG seeded sooner after the system is booted. However, users can't do anything actionble to address this, and spamming the kernel messages log will only just annoy people. For developers who want to work on improving this situation, CONFIG_WARN_UNSEEDED_RANDOM has been renamed to CONFIG_WARN_ALL_UNSEEDED_RANDOM. By default the kernel will always print the first use of unseeded randomness. This way, hopefully the security obsessed will be happy that there is _some_ indication when the kernel boots there may be a potential issue with that architecture or subarchitecture. To see all uses of unseeded randomness, developers can enable CONFIG_WARN_ALL_UNSEEDED_RANDOM. Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 15 July 2017, 16:19:28 UTC |
a80099a | Linus Torvalds | 15 July 2017, 05:57:32 UTC | Merge tag 'xfs-4.13-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull XFS fixes from Darrick Wong: "Largely debugging and regression fixes. - Add some locking assertions for the _ilock helpers. - Revert the XFS_QMOPT_NOLOCK patch; after discussion with hch the online fsck patch that would have needed it has been redesigned and no longer needs it. - Fix behavioral regression of SEEK_HOLE/DATA with negative offsets to match 4.12-era XFS behavior" * tag 'xfs-4.13-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: in iomap seek_{hole,data}, return -ENXIO for negative offsets Revert "xfs: grab dquots without taking the ilock" xfs: assert locking precondition in xfs_readlink_bmap_ilocked xfs: assert locking precondіtion in xfs_attr_list_int_ilocked xfs: fixup xfs_attr_get_ilocked | 15 July 2017, 05:57:32 UTC |
bc24370 | Linus Torvalds | 15 July 2017, 05:55:52 UTC | Merge branch 'for-4.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We've identified and fixed a silent corruption (introduced by code in the first pull), a fixup after the blk_status_t merge and two fixes to incremental send that Filipe has been hunting for some time" * 'for-4.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix unexpected return value of bio_readpage_error btrfs: btrfs_create_repair_bio never fails, skip error handling btrfs: cloned bios must not be iterated by bio_for_each_segment_all Btrfs: fix write corruption due to bio cloning on raid5/6 Btrfs: incremental send, fix invalid memory access Btrfs: incremental send, fix invalid path for link commands | 15 July 2017, 05:55:52 UTC |
0ffff11 | Linus Torvalds | 15 July 2017, 05:53:37 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull a few more input updates from Dmitry Torokhov: - multi-touch handling for Xen - fix for long-standing bug causing crashes in i8042 on boot - change to gpio_keys to better handle key presses during system state transition * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - fix crash at boot time Input: gpio_keys - handle the missing key press event in resume phase Input: xen-kbdfront - add multi-touch support | 15 July 2017, 05:53:37 UTC |
dcf903d | Linus Torvalds | 15 July 2017, 05:49:50 UTC | Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - fix new compiler warnings in cavium - set post-op IV properly in caam (this fixes chaining) - fix potential use-after-free in atmel in case of EBUSY - fix sleeping in softirq path in chcr - disable buggy sha1-avx2 driver (may overread and page fault) - fix use-after-free on signals in caam * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: cavium - make several functions static crypto: chcr - Avoid algo allocation in softirq. crypto: caam - properly set IV after {en,de}crypt crypto: atmel - only treat EBUSY as transient if backlog crypto: af_alg - Avoid sock_graft call warning crypto: caam - fix signals handling crypto: sha1-ssse3 - Disable avx2 | 15 July 2017, 05:49:50 UTC |
96d0d83 | Linus Torvalds | 15 July 2017, 05:39:35 UTC | Merge tag 'devprop-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "This fixes a problem with bool properties that could be seen as "true" when the property was not present at all by adding a special helper for bool properties with checks for all of the requisute conditions (Sakari Ailus)" * tag 'devprop-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Introduce fwnode_call_bool_op() for ops that return bool | 15 July 2017, 05:39:35 UTC |
1ef2740 | Linus Torvalds | 15 July 2017, 05:27:13 UTC | Merge tag 'acpi-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix the return value of an IRQ mapping routine in the ACPI core, fix an EC driver issue causing abnormal fan behavior after system resume on some systems and add quirks for ACPI device objects that need to be treated as "always present" to work around bogus implementations of the _STA control method. Specifics: - Fix the return value of acpi_gsi_to_irq() to make the GSI to IRQ mapping work on the Mustang (ARM64) platform (Mark Salter). - Fix an EC driver issue that causes fans to behave abnormally after system resume on some systems which turns out to be related to switching over the EC into the polling mode during the noirq stages of system suspend and resume (Lv Zheng). - Add quirks for ACPI device objects that need to be treated as "always present", because their _STA methods are designed to work around Windows driver bugs and return garbage from our perspective (Hans de Goede)" * tag 'acpi-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / x86: Add KIOX000A accelerometer on GPD win to always_present_ids array ACPI / x86: Add Dell Venue 11 Pro 7130 touchscreen to always_present_ids ACPI / x86: Allow matching always_present_id array entries by DMI Revert "ACPI / EC: Enable event freeze mode..." to fix a regression ACPI / EC: Drop EC noirq hooks to fix a regression ACPI / irq: Fix return code of acpi_gsi_to_irq() | 15 July 2017, 05:27:13 UTC |
e37720e | Linus Torvalds | 15 July 2017, 05:24:25 UTC | Merge tag 'pm-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a recently exposed issue in the PCI device wakeup code and one older problem related to PCI device wakeup that has been reported recently, modify one more piece of computations in intel_pstate to get rid of a rounding error, fix a possible race in the schedutil cpufreq governor, fix the device PM QoS sysfs interface to correctly handle invalid user input, fix return values of two probe routines in devfreq drivers and constify an attribute_group structure in devfreq. Specifics: - Avoid clearing the PCI PME Enable bit for devices as a result of config space restoration which confuses AML executed afterward and causes wakeup events to be lost on some systems (Rafael Wysocki). - Fix the native PCIe PME interrupts handling in the cases when the PME IRQ is set up as a system wakeup one so that runtime PM remote wakeup works as expected after system resume on systems where that happens (Rafael Wysocki). - Fix the device PM QoS sysfs interface to handle invalid user input correctly instead of using an unititialized variable value as the latency tolerance for the device at hand (Dan Carpenter). - Get rid of one more rounding error from intel_pstate computations (Srinivas Pandruvada). - Fix the schedutil cpufreq governor to prevent it from possibly accessing unititialized data structures from governor callbacks in some cases on systems when multiple CPUs share a single cpufreq policy object (Vikram Mulukutla). - Fix the return values of probe routines in two devfreq drivers (Gustavo Silva). - Constify an attribute_group structure in devfreq (Arvind Yadav)" * tag 'pm-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI / PM: Fix native PME handling during system suspend/resume PCI / PM: Restore PME Enable after config space restoration cpufreq: schedutil: Fix sugov_start() versus sugov_update_shared() race PM / QoS: return -EINVAL for bogus strings cpufreq: intel_pstate: Fix ratio setting for min_perf_pct PM / devfreq: constify attribute_group structures. PM / devfreq: tegra: fix error return code in tegra_devfreq_probe() PM / devfreq: rk3399_dmc: fix error return code in rk3399_dmcfreq_probe() | 15 July 2017, 05:24:25 UTC |
867eacd | Linus Torvalds | 15 July 2017, 04:57:25 UTC | Merge branch 'akpm' (patches from Andrew) Merge even more updates from Andrew Morton: - a few leftovers - fault-injector rework - add a module loader test driver * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kmod: throttle kmod thread limit kmod: add test driver to stress test the module loader MAINTAINERS: give kmod some maintainer love xtensa: use generic fb.h fault-inject: add /proc/<pid>/fail-nth fault-inject: simplify access check for fail-nth fault-inject: make fail-nth read/write interface symmetric fault-inject: parse as natural 1-based value for fail-nth write interface fault-inject: automatically detect the number base for fail-nth write interface kernel/watchdog.c: use better pr_fmt prefix MAINTAINERS: move the befs tree to kernel.org lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int mm: fix overflow check in expand_upwards() | 15 July 2017, 04:57:25 UTC |
077d2ba | Daniel Micay | 14 July 2017, 21:28:12 UTC | replace incorrect strscpy use in FORTIFY_SOURCE Using strscpy was wrong because FORTIFY_SOURCE is passing the maximum possible size of the outermost object, but strscpy defines the count parameter as the exact buffer size, so this could copy past the end of the source. This would still be wrong with the planned usage of __builtin_object_size(p, 1) for intra-object overflow checks since it's the maximum possible size of the specified object with no guarantee of it being that large. Reuse of the fortified functions like this currently makes the runtime error reporting less precise but that can be improved later on. Noticed by Dave Jones and KASAN. Signed-off-by: Daniel Micay <danielmicay@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 15 July 2017, 04:56:31 UTC |
01ea917 | Linus Torvalds | 15 July 2017, 04:50:50 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile updates from Chris Metcalf: "This adds support for an <arch/intreg.h> to help with removing __need_xxx #defines from glibc, and removes some dead code in arch/tile/mm/init.c" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: mm, tile: drop arch_{add,remove}_memory tile: prefer <arch/intreg.h> to __need_int_reg_t | 15 July 2017, 04:50:50 UTC |
deed9de | Linus Torvalds | 14 July 2017, 22:33:15 UTC | Merge tag 'powerpc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Nothing that really stands out, just a bunch of fixes that have come in in the last couple of weeks. None of these are actually fixes for code that is new in 4.13. It's roughly half older bugs, with fixes going to stable, and half fixes/updates for Power9. Thanks to: Aneesh Kumar K.V, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt, Madhavan Srinivasan, Michael Neuling, Nicholas Piggin, Oliver O'Halloran" * tag 'powerpc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64: Fix atomic64_inc_not_zero() to return an int powerpc: Fix emulation of mfocrf in emulate_step() powerpc: Fix emulation of mcrf in emulate_step() powerpc/perf: Add POWER9 alternate PM_RUN_CYC and PM_RUN_INST_CMPL events powerpc/perf: Fix SDAR_MODE value for continous sampling on Power9 powerpc/asm: Mark cr0 as clobbered in mftb() powerpc/powernv: Fix local TLB flush for boot and MCE on POWER9 powerpc/mm/radix: Synchronize updates to the process table powerpc/mm/radix: Properly clear process table entry powerpc/powernv: Tell OPAL about our MMU mode on POWER9 powerpc/kexec: Fix radix to hash kexec due to IAMR/AMOR | 14 July 2017, 22:33:15 UTC |
6d7964a | Luis R. Rodriguez | 14 July 2017, 21:50:11 UTC | kmod: throttle kmod thread limit If we reach the limit of modprobe_limit threads running the next request_module() call will fail. The original reason for adding a kill was to do away with possible issues with in old circumstances which would create a recursive series of request_module() calls. We can do better than just be super aggressive and reject calls once we've reached the limit by simply making pending callers wait until the threshold has been reduced, and then throttling them in, one by one. This throttling enables requests over the kmod concurrent limit to be processed once a pending request completes. Only the first item queued up to wait is woken up. The assumption here is once a task is woken it will have no other option to also kick the queue to check if there are more pending tasks -- regardless of whether or not it was successful. By throttling and processing only max kmod concurrent tasks we ensure we avoid unexpected fatal request_module() calls, and we keep memory consumption on module loading to a minimum. With x86_64 qemu, with 4 cores, 4 GiB of RAM it takes the following run time to run both tests: time ./kmod.sh -t 0008 real 0m16.366s user 0m0.883s sys 0m8.916s time ./kmod.sh -t 0009 real 0m50.803s user 0m0.791s sys 0m9.852s Link: http://lkml.kernel.org/r/20170628223155.26472-4-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
d9c6a72 | Luis R. Rodriguez | 14 July 2017, 21:50:08 UTC | kmod: add test driver to stress test the module loader This adds a new stress test driver for kmod: the kernel module loader. The new stress test driver, test_kmod, is only enabled as a module right now. It should be possible to load this as built-in and load tests early (refer to the force_init_test module parameter), however since a lot of test can get a system out of memory fast we leave this disabled for now. Using a system with 1024 MiB of RAM can *easily* get your kernel OOM fast with this test driver. The test_kmod driver exposes API knobs for us to fine tune simple request_module() and get_fs_type() calls. Since these API calls only allow each one parameter a test driver for these is rather simple. Other factors that can help out test driver though are the number of calls we issue and knowing current limitations of each. This exposes configuration as much as possible through userspace to be able to build tests directly from userspace. Since it allows multiple misc devices its will eventually (once we add a knob to let us create new devices at will) also be possible to perform more tests in parallel, provided you have enough memory. We only enable tests we know work as of right now. Demo screenshots: # tools/testing/selftests/kmod/kmod.sh kmod_test_0001_driver: OK! - loading kmod test kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0001_fs: OK! - loading kmod test kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL kmod_test_0002_driver: OK! - loading kmod test kmod_test_0002_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0002_fs: OK! - loading kmod test kmod_test_0002_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL kmod_test_0003: OK! - loading kmod test kmod_test_0003: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0004: OK! - loading kmod test kmod_test_0004: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0005: OK! - loading kmod test kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0006: OK! - loading kmod test kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0005: OK! - loading kmod test kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0006: OK! - loading kmod test kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS XXX: add test restult for 0007 Test completed You can also request for specific tests: # tools/testing/selftests/kmod/kmod.sh -t 0001 kmod_test_0001_driver: OK! - loading kmod test kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0001_fs: OK! - loading kmod test kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL Test completed Lastly, the current available number of tests: # tools/testing/selftests/kmod/kmod.sh --help Usage: tools/testing/selftests/kmod/kmod.sh [ -t <4-number-digit> ] Valid tests: 0001-0009 0001 - Simple test - 1 thread for empty string 0002 - Simple test - 1 thread for modules/filesystems that do not exist 0003 - Simple test - 1 thread for get_fs_type() only 0004 - Simple test - 2 threads for get_fs_type() only 0005 - multithreaded tests with default setup - request_module() only 0006 - multithreaded tests with default setup - get_fs_type() only 0007 - multithreaded tests with default setup test request_module() and get_fs_type() 0008 - multithreaded - push kmod_concurrent over max_modprobes for request_module() 0009 - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type() The following test cases currently fail, as such they are not currently enabled by default: # tools/testing/selftests/kmod/kmod.sh -t 0008 # tools/testing/selftests/kmod/kmod.sh -t 0009 To be sure to run them as intended please unload both of the modules: o test_module o xfs And ensure they are not loaded on your system prior to testing them. If you use these paritions for your rootfs you can change the default test driver used for get_fs_type() by exporting it into your environment. For example of other test defaults you can override refer to kmod.sh allow_user_defaults(). Behind the scenes this is how we fine tune at a test case prior to hitting a trigger to run it: cat /sys/devices/virtual/misc/test_kmod0/config echo -n "2" > /sys/devices/virtual/misc/test_kmod0/config_test_case echo -n "ext4" > /sys/devices/virtual/misc/test_kmod0/config_test_fs echo -n "80" > /sys/devices/virtual/misc/test_kmod0/config_num_threads cat /sys/devices/virtual/misc/test_kmod0/config echo -n "1" > /sys/devices/virtual/misc/test_kmod0/config_num_threads Finally to trigger: echo -n "1" > /sys/devices/virtual/misc/test_kmod0/trigger_config The kmod.sh script uses the above constructs to build different test cases. A bit of interpretation of the current failures follows, first two premises: a) When request_module() is used userspace figures out an optimized version of module order for us. Once it finds the modules it needs, as per depmod symbol dep map, it will finit_module() the respective modules which are needed for the original request_module() request. b) We have an optimization in place whereby if a kernel uses request_module() on a module already loaded we never bother userspace as the module already is loaded. This is all handled by kernel/kmod.c. A few things to consider to help identify root causes of issues: 0) kmod 19 has a broken heuristic for modules being assumed to be built-in to your kernel and will return 0 even though request_module() failed. Upgrade to a newer version of kmod. 1) A get_fs_type() call for "xfs" will request_module() for "fs-xfs", not for "xfs". The optimization in kernel described in b) fails to catch if we have a lot of consecutive get_fs_type() calls. The reason is the optimization in place does not look for aliases. This means two consecutive get_fs_type() calls will bump kmod_concurrent, whereas request_module() will not. This one explanation why test case 0009 fails at least once for get_fs_type(). 2) If a module fails to load --- for whatever reason (kmod_concurrent limit reached, file not yet present due to rootfs switch, out of memory) we have a period of time during which module request for the same name either with request_module() or get_fs_type() will *also* fail to load even if the file for the module is ready. This explains why *multiple* NULLs are possible on test 0009. 3) finit_module() consumes quite a bit of memory. 4) Filesystems typically also have more dependent modules than other modules, its important to note though that even though a get_fs_type() call does not incur additional kmod_concurrent bumps, since userspace loads dependencies it finds it needs via finit_module_fd(), it *will* take much more memory to load a module with a lot of dependencies. Because of 3) and 4) we will easily run into out of memory failures with certain tests. For instance test 0006 fails on qemu with 1024 MiB of RAM. It panics a box after reaping all userspace processes and still not having enough memory to reap. [arnd@arndb.de: add dependencies for test module] Link: http://lkml.kernel.org/r/20170630154834.3689272-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170628223155.26472-3-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
062b874 | Luis R. Rodriguez | 14 July 2017, 21:50:05 UTC | MAINTAINERS: give kmod some maintainer love As suggested by Jessica, I've been actively working on kmod, so might as well reflect its maintained status. Changes are expected to go through akpm's tree. Link: http://lkml.kernel.org/r/20170628223155.26472-2-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Suggested-by: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
20cf0c5 | Tobias Klauser | 14 July 2017, 21:50:03 UTC | xtensa: use generic fb.h The arch uses a verbatim copy of the asm-generic version and does not add any own implementations to the header, so use asm-generic/fb.h instead of duplicating code. Link: http://lkml.kernel.org/r/20170517083545.2115-1-tklauser@distanz.ch Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
168c42b | Akinobu Mita | 14 July 2017, 21:50:00 UTC | fault-inject: add /proc/<pid>/fail-nth fail-nth interface is only created in /proc/self/task/<current-tid>/. This change also adds it in /proc/<pid>/. This makes shell based tool a bit simpler. $ bash -c "builtin echo 100 > /proc/self/fail-nth && exec ls /" Link: http://lkml.kernel.org/r/1491490561-10485-6-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
1203c8e | Akinobu Mita | 14 July 2017, 21:49:57 UTC | fault-inject: simplify access check for fail-nth The fail-nth file is created with 0666 and the access is permitted if and only if the task is current. This file is owned by the currnet user. So we can create it with 0644 and allow the owner to write it. This enables to watch the status of task->fail_nth from another processes. [akinobu.mita@gmail.com: don't convert unsigned type value as signed int] Link: http://lkml.kernel.org/r/1492444483-9239-1-git-send-email-akinobu.mita@gmail.com [akinobu.mita@gmail.com: avoid unwanted data race to task->fail_nth] Link: http://lkml.kernel.org/r/1499962492-8931-1-git-send-email-akinobu.mita@gmail.com Link: http://lkml.kernel.org/r/1491490561-10485-5-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
bfc7409 | Akinobu Mita | 14 July 2017, 21:49:54 UTC | fault-inject: make fail-nth read/write interface symmetric The read interface for fail-nth looks a bit odd. Read from this file returns "NYYYY..." or "YYYYY..." (this makes me surprise when cat this file). Because there is no EOF condition. The first character indicates current->fail_nth is zero or not, and then current->fail_nth is reset to zero. Just returning task->fail_nth value is more natural to understand. Link: http://lkml.kernel.org/r/1491490561-10485-4-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
9049f2f | Akinobu Mita | 14 July 2017, 21:49:52 UTC | fault-inject: parse as natural 1-based value for fail-nth write interface The value written to fail-nth file is parsed as 0-based. Parsing as one-based is more natural to understand and it enables to cancel the previous setup by simply writing '0'. This change also converts task->fail_nth from signed to unsigned int. Link: http://lkml.kernel.org/r/1491490561-10485-3-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
ecaad81 | Akinobu Mita | 14 July 2017, 21:49:49 UTC | fault-inject: automatically detect the number base for fail-nth write interface Automatically detect the number base to use when writing to fail-nth file instead of always parsing as a decimal number. Link: http://lkml.kernel.org/r/1491490561-10485-2-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
5f92a7b | Kefeng Wang | 14 July 2017, 21:49:46 UTC | kernel/watchdog.c: use better pr_fmt prefix After commit 73ce0511c436 ("kernel/watchdog.c: move hardlockup detector to separate file"), 'NMI watchdog' is inappropriate in kernel/watchdog.c, using 'watchdog' only. Link: http://lkml.kernel.org/r/1499928642-48983-1-git-send-email-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Babu Moger <babu.moger@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
5624a8b | Luis de Bethencourt | 14 July 2017, 21:49:44 UTC | MAINTAINERS: move the befs tree to kernel.org Update the location of the befs git tree and my email address. Link: http://lkml.kernel.org/r/20170709110012.2991-1-luisbg@kernel.org Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
ffba19c | Michael Ellerman | 14 July 2017, 21:49:41 UTC | lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int atomic64_inc_not_zero() returns a "truth value" which in C is traditionally an int. That means callers are likely to expect the result will fit in an int. If an implementation returns a "true" value which does not fit in an int, then there's a possibility that callers will truncate it when they store it in an int. In fact this happened in practice, see commit 966d2b04e070 ("percpu-refcount: fix reference leak during percpu-atomic transition"). So add a test that the result fits in an int, even when the input doesn't. This catches the case where an implementation just passes the non-zero input value out as the result. Link: http://lkml.kernel.org/r/1499775133-1231-1-git-send-email-mpe@ellerman.id.au Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:13 UTC |
37511fb | Helge Deller | 14 July 2017, 21:49:38 UTC | mm: fix overflow check in expand_upwards() Jörn Engel noticed that the expand_upwards() function might not return -ENOMEM in case the requested address is (unsigned long)-PAGE_SIZE and if the architecture didn't defined TASK_SIZE as multiple of PAGE_SIZE. Affected architectures are arm, frv, m68k, blackfin, h8300 and xtensa which all define TASK_SIZE as 0xffffffff, but since none of those have an upwards-growing stack we currently have no actual issue. Nevertheless let's fix this just in case any of the architectures with an upward-growing stack (currently parisc, metag and partly ia64) define TASK_SIZE similar. Link: http://lkml.kernel.org/r/20170702192452.GA11868@p100.box Fixes: bd726c90b6b8 ("Allow stack to grow up to address space limit") Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: Jörn Engel <joern@purestorage.com> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 14 July 2017, 22:05:12 UTC |
a666443 | Richard Weinberger | 26 June 2017, 11:49:04 UTC | ubifs: Set double hash cookie also for RENAME_EXCHANGE We developed RENAME_EXCHANGE and UBIFS_FLG_DOUBLE_HASH more or less in parallel and this case was forgotten. :-( Cc: stable@vger.kernel.org Fixes: d63d61c16972 ("ubifs: Implement UBIFS_FLG_DOUBLE_HASH") Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:50:57 UTC |
d8db5b1 | Xiaolei Li | 23 June 2017, 02:37:23 UTC | ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs The inode is not locked in init_xattrs when creating a new inode. Without this patch, there will occurs assert when booting or creating a new file, if the kernel config CONFIG_SECURITY_SMACK is enabled. Log likes: UBIFS assert failed in ubifs_xattr_set at 298 (pid 1156) CPU: 1 PID: 1156 Comm: ldconfig Tainted: G S 4.12.0-rc1-207440-g1e70b02 #2 Hardware name: MediaTek MT2712 evaluation board (DT) Call trace: [<ffff000008088538>] dump_backtrace+0x0/0x238 [<ffff000008088834>] show_stack+0x14/0x20 [<ffff0000083d98d4>] dump_stack+0x9c/0xc0 [<ffff00000835d524>] ubifs_xattr_set+0x374/0x5e0 [<ffff00000835d7ec>] init_xattrs+0x5c/0xb8 [<ffff000008385788>] security_inode_init_security+0x110/0x190 [<ffff00000835e058>] ubifs_init_security+0x30/0x68 [<ffff00000833ada0>] ubifs_mkdir+0x100/0x200 [<ffff00000820669c>] vfs_mkdir+0x11c/0x1b8 [<ffff00000820b73c>] SyS_mkdirat+0x74/0xd0 [<ffff000008082f8c>] __sys_trace_return+0x0/0x4 Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:50:54 UTC |
4acadda | Richard Weinberger | 16 June 2017, 14:21:44 UTC | ubifs: Don't leak kernel memory to the MTD When UBIFS prepares data structures which will be written to the MTD it ensues that their lengths are multiple of 8. Since it uses kmalloc() the padded bytes are left uninitialized and we leak a few bytes of kernel memory to the MTD. To make sure that all bytes are initialized, let's switch to kzalloc(). Kzalloc() is fine in this case because the buffers are not huge and in the IO path the performance bottleneck is anyway the MTD. Cc: stable@vger.kernel.org Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:50:52 UTC |
480a1a6 | Hyunchul Lee | 14 June 2017, 00:31:49 UTC | ubifs: Change gfp flags in page allocation for bulk read In low memory situations, page allocations for bulk read can kill applications for reclaiming memory, and print an failure message when allocations are failed. Because bulk read is just an optimization, we don't have to do these and can stop page allocations. Though this siutation happens rarely, add __GFP_NORETRY to prevent from excessive memory reclaim and killing applications, and __GFP_WARN to suppress this failure message. For this, Use readahead_gfp_mask for gfp flags when allocating pages. Signed-off-by: Hyunchul Lee <cheol.lee@lge.com> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:50:50 UTC |
07d41c3 | karam.lee | 12 June 2017, 01:46:31 UTC | ubifs: Fix oops when remounting with no_bulk_read. When remounting with the no_bulk_read option, there is a problem accessing the "bulk_read buffer(bu.buf)" which has already been freed. If the bulk_read option is enabled, ubifs_tnc_bulk_read uses the pre-allocated bu.buf. While bu.buf is being used by ubifs_tnc_bulk_read, remounting with no_bulk_read frees bu.buf. So I added code to check the use of "bu.buf" to avoid this situation. ------ I tested as follows(kernel v3.18) : Use the script to repeat "no_bulk_read <-> bulk_read" remount.sh #!/bin/sh while true do; mount -o remount,no_bulk_read ${MOUNT_POINT}; sleep 1; mount -o remount,bulk_read ${MOUNT_POINT}; sleep 1; done Perform read operation cat ${MOUNT_POINT}/* > /dev/null The problem is reproduced immediately. [ 234.256845][kernel.0]Internal error: Oops: 17 [#1] PREEMPT ARM [ 234.258557][kernel.0]CPU: 0 PID: 2752 Comm: cat Tainted: G W O 3.18.31+ #51 [ 234.259531][kernel.0]task: cbff8580 ti: cbd66000 task.ti: cbd66000 [ 234.260306][kernel.0]PC is at validate_data_node+0x10/0x264 [ 234.260994][kernel.0]LR is at ubifs_tnc_bulk_read+0x388/0x3ec [ 234.261712][kernel.0]pc : [<c01d98fc>] lr : [<c01dc300>] psr: 80000013 [ 234.261712][kernel.0]sp : cbd67ba0 ip : 00000001 fp : 00000000 [ 234.263337][kernel.0]r10: cd3e0260 r9 : c0df2008 r8 : 00000000 [ 234.264087][kernel.0]r7 : cd3e0000 r6 : 00000000 r5 : cd3e0278 r4 : cd3e0000 [ 234.264999][kernel.0]r3 : 00000003 r2 : cd3e0280 r1 : 00000000 r0 : cd3e0000 [ 234.265910][kernel.0]Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 234.266896][kernel.0]Control: 10c53c7d Table: 8c40c059 DAC: 00000015 [ 234.267711][kernel.0]Process cat (pid: 2752, stack limit = 0xcbd66400) [ 234.268525][kernel.0]Stack: (0xcbd67ba0 to 0xcbd68000) [ 234.269169][kernel.0]7ba0: cd7c3940 c03d8650 0001bfe0 00002ab2 00000000 cbd67c5c cbd67c58 0001bfe0 [ 234.270287][kernel.0]7bc0: cd3e0000 00002ab2 0001bfe0 00000014 cbd66000 cd3e0260 00000000 c01d6660 [ 234.271403][kernel.0]7be0: 00002ab2 00000000 c82a5800 ffffffff cd3e0298 cd3e0278 00000000 cd3e0000 [ 234.272520][kernel.0]7c00: 00000000 00000000 cd3e0260 c01dc300 00002ab2 00000000 60000013 d663affa [ 234.273639][kernel.0]7c20: cd3e01f0 cd3e01f0 60000013 c09397ec 00000000 cd3e0278 00002ab2 00000000 [ 234.274755][kernel.0]7c40: cd3e0000 c01dbf48 00000014 00000003 00000160 00000015 00000004 d663affa [ 234.275874][kernel.0]7c60: ccdaa978 cd3e0278 cd3e0000 cf32a5f4 ccdaa820 00000044 cbd66000 cd3e0260 [ 234.276992][kernel.0]7c80: 00000003 c01cec84 ccdaa8dc cbd67cc4 cbd67ec0 00000010 ccdaa978 00000000 [ 234.278108][kernel.0]7ca0: 0000015e ccdaa8dc 00000000 00000000 cf32a5d0 00000000 0000015f ccdaa8dc [ 234.279228][kernel.0]7cc0: 00000000 c8488300 0009e5a4 0000000e cbd66000 0000015e cf32a5f4 c0113c04 [ 234.280346][kernel.0]7ce0: 0000009f 0000003c c00098c4 ffffffff 00001000 00000000 000000ad 00000010 [ 234.281463][kernel.0]7d00: 00000038 cd68f580 00000150 c8488360 00000000 cbd67d30 cbd67d70 0000000e [ 234.282579][kernel.0]7d20: 00000010 00000000 c0951874 c0112a9c cf379b60 cf379b84 cf379890 cf3798b4 [ 234.283699][kernel.0]7d40: cf379578 cf37959c cf379380 cf3793a4 cf3790b0 cf3790d4 cf378fd8 cf378ffc [ 234.284814][kernel.0]7d60: cf378f48 cf378f6c cf32a5f4 cf32a5d0 00000000 00001000 00000018 00000000 [ 234.285932][kernel.0]7d80: 00001000 c0050da4 00000000 00001000 cec04c00 00000000 00001000 c0e11328 [ 234.287049][kernel.0]7da0: 00000000 00001000 cbd66000 00000000 00001000 c0012a60 00000000 00001000 [ 234.288166][kernel.0]7dc0: cbd67dd4 00000000 00001000 80000013 00000000 00001000 cd68f580 00000000 [ 234.289285][kernel.0]7de0: 00001000 c915d600 00000000 00001000 cbd67e48 00000000 00001000 00000018 [ 234.290402][kernel.0]7e00: 00000000 00001000 00000000 00000000 00001000 c915d768 c915d768 c0113550 [ 234.291522][kernel.0]7e20: cd68f580 cbd67e48 cd68f580 cb6713c0 00010000 000ac5a4 00000000 001fc5a4 [ 234.292637][kernel.0]7e40: 00000000 c8488300 cbd67ec0 00eb0000 cd68f580 c0113ee4 00000000 cbd67ec0 [ 234.293754][kernel.0]7e60: cd68f580 c8488300 cbd67ec0 00eb0000 cd68f580 00150000 c8488300 00eb0000 [ 234.294874][kernel.0]7e80: 00010000 c0112fd0 00000000 cbd67ec0 cd68f580 00150000 00000000 cd68f580 [ 234.295991][kernel.0]7ea0: cbd67ef0 c011308c 00000000 00000002 cd768850 00010000 00000000 c01133fc [ 234.297110][kernel.0]7ec0: 00150000 00000000 cbd67f50 00000000 00000000 cb6713c0 01000000 cbd67f48 [ 234.298226][kernel.0]7ee0: cbd67f50 c8488300 00000000 c0113204 00010000 01000000 00000000 cb6713c0 [ 234.299342][kernel.0]7f00: 00150000 00000000 cbd67f50 00000000 00000000 00000000 00000000 00000000 [ 234.300462][kernel.0]7f20: cbd67f50 01000000 01000000 cb6713c0 c8488300 c00ebba8 01000000 00000000 [ 234.301577][kernel.0]7f40: c8488300 cb6713c0 00000000 00000000 00000000 00000000 ccdaa820 00000000 [ 234.302697][kernel.0]7f60: 00000000 01000000 00000003 00000001 cbd66000 00000000 00000001 c00ec678 [ 234.303813][kernel.0]7f80: 00000000 00000200 00000000 01000000 01000000 00000000 00000000 000000ef [ 234.304933][kernel.0]7fa0: c000e904 c000e780 01000000 00000000 00000001 00000003 00000000 01000000 [ 234.306049][kernel.0]7fc0: 01000000 00000000 00000000 000000ef 00000001 00000003 01000000 00000001 [ 234.307165][kernel.0]7fe0: 00000000 beafb78c 0000ad08 00128d1c 60000010 00000001 00000000 00000000 [ 234.308292][kernel.0][<c01d98fc>] (validate_data_node) from [<c01dc300>] (ubifs_tnc_bulk_read+0x388/0x3ec) [ 234.309493][kernel.0][<c01dc300>] (ubifs_tnc_bulk_read) from [<c01cec84>] (ubifs_readpage+0x1dc/0x46c) [ 234.310656][kernel.0][<c01cec84>] (ubifs_readpage) from [<c0113c04>] (__generic_file_splice_read+0x29c/0x4cc) [ 234.311890][kernel.0][<c0113c04>] (__generic_file_splice_read) from [<c0113ee4>] (generic_file_splice_read+0xb0/0xf4) [ 234.313214][kernel.0][<c0113ee4>] (generic_file_splice_read) from [<c0112fd0>] (do_splice_to+0x68/0x7c) [ 234.314386][kernel.0][<c0112fd0>] (do_splice_to) from [<c011308c>] (splice_direct_to_actor+0xa8/0x190) [ 234.315544][kernel.0][<c011308c>] (splice_direct_to_actor) from [<c0113204>] (do_splice_direct+0x90/0xb8) [ 234.316741][kernel.0][<c0113204>] (do_splice_direct) from [<c00ebba8>] (do_sendfile+0x17c/0x2b8) [ 234.317838][kernel.0][<c00ebba8>] (do_sendfile) from [<c00ec678>] (SyS_sendfile64+0xc4/0xcc) [ 234.318890][kernel.0][<c00ec678>] (SyS_sendfile64) from [<c000e780>] (ret_fast_syscall+0x0/0x38) [ 234.319983][kernel.0]Code: e92d47f0 e24dd050 e59f9228 e1a04000 (e5d18014) Signed-off-by: karam.lee <karam.lee@lge.com> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:50:40 UTC |
df71b09 | Richard Weinberger | 07 June 2017, 21:33:35 UTC | ubifs: Fail commit if TNC is obviously inconsistent A reference to LEB 0 or with length 0 in the TNC is never correct and could be caused by a memory corruption. Don't write such a bad index node to the MTD. Instead fail the commit which will turn UBIFS into read-only mode. This is less painful than having the bad reference on the MTD from where UBFIS has no chance to recover. Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:07 UTC |
319c104 | Rabin Vincent | 31 May 2017, 09:40:27 UTC | ubifs: allow userspace to map mounts to volumes There currently appears to be no way for userspace to find out the underlying volume number for a mounted ubifs file system, since ubifs uses anonymous block devices. The volume name is present in /proc/mounts but UBI volumes can be renamed after the volume has been mounted. To remedy this, show the UBI number and UBI volume number as part of the options visible under /proc/mounts. Also, accept and ignore the ubi= vol= options if they are used mounting (patch from Richard Weinberger). # mount -t ubifs ubi:baz x # mount ubi:baz on /root/x type ubifs (rw,relatime,ubi=0,vol=2) # ubirename /dev/ubi0 baz bazz # mount ubi:baz on /root/x type ubifs (rw,relatime,ubi=0,vol=2) # ubinfo -d 0 -n 2 Volume ID: 2 (on ubi0) Type: dynamic Alignment: 1 Size: 67 LEBs (1063424 bytes, 1.0 MiB) State: OK Name: bazz Character device major/minor: 254:3 Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:07 UTC |
a02a6eb | Richard Weinberger | 20 May 2017, 22:16:26 UTC | ubifs: Wire-up statx() support statx() can report what flags a file has, expose flags that UBIFS supports. Especially STATX_ATTR_COMPRESSED and STATX_ATTR_ENCRYPTED can be interesting for userspace. Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:07 UTC |
d2eb852 | Richard Weinberger | 17 May 2017, 08:36:49 UTC | ubifs: Remove dead code from ubifs_get_link() We check the length already, no need to check later again for an empty string. Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:07 UTC |
35ee314 | Richard Weinberger | 17 May 2017, 08:36:48 UTC | ubifs: Massage debug prints wrt. fscrypt If file names are encrypted we can no longer print them. That's why we have to change these prints or remove them completely. Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:07 UTC |
8b2900c | Richard Weinberger | 17 May 2017, 08:36:47 UTC | ubifs: Add assert to dent_key_init() ...to make sure that we don't use it for double hashed lookups instead of dent_key_init_hash(). Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:06 UTC |
781f675 | Richard Weinberger | 17 May 2017, 08:36:46 UTC | ubifs: Fix unlink code wrt. double hash lookups When removing an encrypted file with a long name and without having the key we have to be able to locate and remove the directory entry via a double hash. This corner case was simply forgotten. Fixes: 528e3d178f25 ("ubifs: Add full hash lookup support") Reported-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:06 UTC |
59a7499 | David Oberhollenzer | 17 May 2017, 08:36:45 UTC | ubifs: Fix data node size for truncating uncompressed nodes Currently, the function truncate_data_node only updates the destination data node size if compression is used. For uncompressed nodes, the old length is incorrectly retained. This patch makes sure that the length is correctly set when compression is disabled. Fixes: 7799953b34d1 ("ubifs: Implement encrypt/decrypt for all IO") Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:06 UTC |
f34e87f | David Gstir | 17 May 2017, 11:36:16 UTC | ubifs: Don't encrypt special files on creation When a new inode is created, we check if the containing folder has a encryption policy set and inherit that. This should however only be done for regular files, links and subdirectories. Not for sockes fifos etc. Fixes: d475a507457b ("ubifs: Add skeleton for fscrypto") Cc: stable@vger.kernel.org Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:05 UTC |
bb50c63 | Hyunchul Lee | 16 May 2017, 23:58:02 UTC | ubifs: Fix memory leak in RENAME_WHITEOUT error path in do_rename in RENAME_WHITEOUT error path, fscrypt_name should be freed. Signed-off-by: Hyunchul Lee <cheol.lee@lge.com> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:05 UTC |
4d35ca4 | Hyunchul Lee | 16 May 2017, 23:57:18 UTC | ubifs: Fix inode data budget in ubifs_mknod Assign inode data budget to budget request correctly. Signed-off-by: Hyunchul Lee <cheol.lee@lge.com> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:05 UTC |
272eda8 | Richard Weinberger | 16 May 2017, 22:20:27 UTC | ubifs: Correctly evict xattr inodes UBIFS handles extended attributes just like files, as consequence of that, they also have inodes. Therefore UBIFS does all the inode machinery also for xattrs. Since new inodes have i_nlink of 1, a file or xattr inode will be evicted if i_nlink goes down to 0 after an unlink. UBIFS assumes this model also for xattrs, which is not correct. One can create a file "foo" with xattr "user.test". By reading "user.test" an inode will be created, and by deleting "user.test" it will get evicted later. The assumption breaks if the file "foo", which hosts the xattrs, will be removed. VFS nor UBIFS does not remove each xattr via ubifs_xattr_remove(), it just removes the host inode from the TNC and all underlying xattr nodes too and the inode will remain in the cache and wastes memory. To solve this problem, remove xattr inodes from the VFS inode cache in ubifs_xattr_remove() to make sure that they get evicted. Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system") Cc: <stable@vger.kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:49:04 UTC |
e996bfd | Richard Weinberger | 16 May 2017, 22:20:26 UTC | ubifs: Unexport ubifs_inode_slab This SLAB is only being used in super.c, there is no need to expose it into the global namespace. Signed-off-by: Richard Weinberger <richard@nod.at> | 14 July 2017, 20:48:43 UTC |
ccd5d1b | Linus Torvalds | 14 July 2017, 20:31:52 UTC | Merge tag 'ntb-4.13' of git://github.com/jonmason/ntb Pull NTB updates from Jon Mason: "The major change in the series is a rework of the NTB infrastructure to all for IDT hardware to be supported (and resulting fallout from that). There are also a few clean-ups, etc. New IDT NTB driver and changes to the NTB infrastructure to allow for this different kind of NTB HW, some style fixes (per Greg KH recommendation), and some ntb_test tweaks" * tag 'ntb-4.13' of git://github.com/jonmason/ntb: ntb_netdev: set the net_device's parent ntb: Add error path/handling to Debug FS entry creation ntb: Add more debugfs support for ntb_perf testing options ntb: Remove debug-fs variables from the context structure ntb: Add a module option to control affinity of DMA channels NTB: Add IDT 89HPESxNTx PCIe-switches support ntb_hw_intel: Style fixes: open code macros that just obfuscate code ntb_hw_amd: Style fixes: open code macros that just obfuscate code NTB: Add ntb.h comments NTB: Add PCIe Gen4 link speed NTB: Add new Memory Windows API documentation NTB: Add Messaging NTB API NTB: Alter Scratchpads API to support multi-ports devices NTB: Alter MW API to support multi-ports devices NTB: Alter link-state API to support multi-port devices NTB: Add indexed ports NTB API NTB: Make link-state API being declared first NTB: ntb_test: add parameter for doorbell bitmask NTB: ntb_test: modprobe on remote host | 14 July 2017, 20:31:52 UTC |
4d25ec1 | Linus Torvalds | 14 July 2017, 20:12:32 UTC | Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Improve thermal cpu_cooling interaction with cpufreq core. The cpu_cooling driver is designed to use CPU frequency scaling to avoid high thermal states for a platform. But it wasn't glued really well with cpufreq core. For example clipped-cpus is copied from the policy structure and its much better to use the policy->cpus (or related_cpus) fields directly as they may have got updated. Not that things were broken before this series, but they can be optimized a bit more. This series tries to improve interactions between cpufreq core and cpu_cooling driver and does some fixes/cleanups to the cpu_cooling driver. (Viresh Kumar) - A couple of fixes and cleanups in thermal core and imx, hisilicon, bcm_2835, int340x thermal drivers. (Arvind Yadav, Dan Carpenter, Sumeet Pawnikar, Srinivas Pandruvada, Willy WOLFF) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits) thermal: bcm2835: fix an error code in probe() thermal: hisilicon: Handle return value of clk_prepare_enable thermal: imx: Handle return value of clk_prepare_enable thermal: int340x: check for sensor when PTYP is missing Thermal/int340x: Fix few typos and kernel-doc style thermal: fix source code documentation for parameters thermal: cpu_cooling: Replace kmalloc with kmalloc_array thermal: cpu_cooling: Rearrange struct cpufreq_cooling_device thermal: cpu_cooling: 'freq' can't be zero in cpufreq_state2power() thermal: cpu_cooling: don't store cpu_dev in cpufreq_cdev thermal: cpu_cooling: get_level() can't fail thermal: cpu_cooling: create structure for idle time stats thermal: cpu_cooling: merge frequency and power tables thermal: cpu_cooling: get rid of 'allowed_cpus' thermal: cpu_cooling: OPPs are registered for all CPUs thermal: cpu_cooling: store cpufreq policy cpufreq: create cpufreq_table_count_valid_entries() thermal: cpu_cooling: use cpufreq_policy to register cooling device thermal: cpu_cooling: get rid of a variable in cpufreq_set_cur_state() thermal: cpu_cooling: remove cpufreq_cooling_get_level() ... | 14 July 2017, 20:12:32 UTC |
907afe5 | Linus Torvalds | 14 July 2017, 20:10:06 UTC | Merge tag 'mmc-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "Here are a couple of mmc fixes intended for v4.13 rc1. MMC core: - Restore some behaviour of MMC_IOC_MULTI_CMD commands - Fix using un-initialized variable in mmc_blk_issue_drv_op() - Fix mmc block queue cleanup MMC host: - sdhci-acpi: Workaround conflict with PCI wifi on GPD Win handheld - tmio-mmc: Fix bad pointer math" * tag 'mmc-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: tmio-mmc: fix bad pointer math mmc: block: Prevent new req entering queue after its cleanup mmc: block: Let MMC_IOC_MULTI_CMD return zero again for zero entries mmc: block: Initialize ret in mmc_blk_issue_drv_op() for MMC_DRV_OP_IOCTL mmc: sdhci-acpi: Workaround conflict with PCI wifi on GPD Win handheld | 14 July 2017, 20:10:06 UTC |
43e5f7e | Mauro Carvalho Chehab | 12 July 2017, 13:03:09 UTC | docs: kprobes.txt: Fix whitespacing The notes at the end of this file start with a blank space, instead of a blank line, violating ReST format. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:14 UTC |
4297739 | Mauro Carvalho Chehab | 12 July 2017, 13:06:20 UTC | tee.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - adjust identation of titles; - mark ascii artwork as a literal block; - adjust references. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:14 UTC |
633b11b | Mauro Carvalho Chehab | 14 May 2017, 11:48:40 UTC | cgroup-v2.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Comment the internal index; - Use :Date: and :Author: for authorship; - Mark titles; - Mark literal blocks; - Adjust witespaces; - Mark notes; - Use table notation for the existing tables. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:13 UTC |
58ef0e5 | Mauro Carvalho Chehab | 17 May 2017, 17:25:05 UTC | dell_rbu.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx. Currently, the document is completely unformatted. Add titles, do indentation, mark literal blocks. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:12 UTC |
998ff0b | Mauro Carvalho Chehab | 17 May 2017, 12:55:46 UTC | zorro.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Use right marks for titles; - Use authorship marks; - Mark literals and literal blocks; - Use autonumbered list for references. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:12 UTC |
29c8c4a | Mauro Carvalho Chehab | 17 May 2017, 12:54:22 UTC | xz.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Use marks for titles; - Adjust indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:11 UTC |
05a0739 | Mauro Carvalho Chehab | 17 May 2017, 12:45:31 UTC | xillybus.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Adjust indentation; - Mark authorship; - Comment internal contents table; - Mark literal blocks; - Don't use all-upercase titles. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:11 UTC |
c6f4d41 | Mauro Carvalho Chehab | 17 May 2017, 12:38:00 UTC | vfio.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - adjust title marks; - use footnote marks; - mark literal blocks; - adjust identation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:10 UTC |
2a26ed8 | Mauro Carvalho Chehab | 17 May 2017, 12:26:06 UTC | vfio-mediated-device.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! In this specific document, the title, copyright and authorship are added as if it were a C file! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - convert document preambule to the proper format; - mark literal blocks; - adjust identation; - use numbered lists for references. Reviewed by: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:10 UTC |
c6ebaf6 | Mauro Carvalho Chehab | 17 May 2017, 12:16:19 UTC | unaligned-memory-access.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - promote document title one level; - use markups for authorship and put it at the beginning; - mark literal blocks; - adjust identation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:09 UTC |
79ab3b0 | Mauro Carvalho Chehab | 17 May 2017, 12:10:48 UTC | this_cpu_ops.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - promote document title one level; - mark literal blocks; - move authorship to the beginning of the file and use markups. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:08 UTC |
aa4d520 | Mauro Carvalho Chehab | 17 May 2017, 12:00:17 UTC | svga.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Use standard notation for titles; - Use the note mark; - mark literal blocks; - adjust identation; - mark the table. Acked-By: Martin Mares <mj@ucw.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:08 UTC |
603699b | Mauro Carvalho Chehab | 17 May 2017, 11:19:34 UTC | static-keys.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Mark titles; - Add a warning mark; - Mark literals and literal blocks; - Adjust identation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:07 UTC |
c6d289d | Mauro Carvalho Chehab | 17 May 2017, 11:03:50 UTC | smsc_ece1099.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Add a title for the document. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:07 UTC |
d1bb1d0 | Mauro Carvalho Chehab | 17 May 2017, 11:01:45 UTC | SM501.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - adjust document title; - use the copyright markup. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:06 UTC |
9135bf4 | Mauro Carvalho Chehab | 17 May 2017, 10:55:32 UTC | siphash.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Mark titles; - Mark literal blocks; - Use :Author: for authorship; - Don't sumerate chapters; - Adjust identation. NOTE: This file has actually two documents inside it, the first one describing siphash, the second one describing halfsiphash. It is likely a good idea to split them when it gets moved to security/ (which is where it probably belongs). Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:06 UTC |
53708b8 | Mauro Carvalho Chehab | 17 May 2017, 10:50:05 UTC | sgi-ioc4.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx. In this case, just adding a title is enough. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:05 UTC |
2273194 | Mauro Carvalho Chehab | 17 May 2017, 10:45:57 UTC | SAK.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - mark document title; - use :Author: and :Date: for authorship; - adjust notation for literals and bold; - mark literal blocks; - adjust identation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:04 UTC |
af3137f | Mauro Carvalho Chehab | 17 May 2017, 09:53:44 UTC | rpmsg.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - mark document and chapter titles; - mark notes; - mark literal blocks; - adjust identation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:04 UTC |
773810d | Mauro Carvalho Chehab | 17 May 2017, 09:46:19 UTC | robust-futexes.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - add a title for the document; - mark literal blocks; Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:03 UTC |
ce3a966 | Mauro Carvalho Chehab | 17 May 2017, 09:42:36 UTC | robust-futex-ABI.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - promote document title; - use :Author: for authorship; - mark literal blocks; - add blank lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:03 UTC |
317a845 | Mauro Carvalho Chehab | 17 May 2017, 09:38:02 UTC | rfkill.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - mark titles; - comment contents index; - mark literal blocks; - adjust identation. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:02 UTC |
620b470 | Mauro Carvalho Chehab | 17 May 2017, 09:31:37 UTC | remoteproc.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - mark document and section titles; - adjust identation; - mark literal blocks Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:02 UTC |
ce0f95a | Mauro Carvalho Chehab | 17 May 2017, 09:18:13 UTC | rbtree.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Mark document title; - Use :Author: for authorship; - mark a sub-section title as such; - mark literal blocks; - adjust identation where needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:01 UTC |
3b03338 | Mauro Carvalho Chehab | 17 May 2017, 01:27:11 UTC | printk-formats.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - add a title for the document; - add markups for section titles; - move authorship to the beginning and use :Author:; - use right markup for tables; - mark literals and literal blocks. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:00 UTC |
9cc07df | Mauro Carvalho Chehab | 17 May 2017, 00:58:47 UTC | preempt-locking.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - mark titles; - mark literal blocks; - adjust identation where needed; - use :Author: for authorship. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:58:00 UTC |
9a4aa7b | Mauro Carvalho Chehab | 16 May 2017, 14:23:58 UTC | pnp.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - Use a markup for document title; - use :Author: and :Last updated: for authorship; - adjust whitespaces where needed; - mark literal blocks; - fix a few subtitle markups. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:57:59 UTC |
5da98b8 | Mauro Carvalho Chehab | 16 May 2017, 13:23:05 UTC | pi-futex.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx. This document requires just minor adjustments to match the standard documentation style: - promote document name; - remove extra collons on some chapter titles; - use "-" for a bulleted list. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:57:59 UTC |
5426a2c | Mauro Carvalho Chehab | 16 May 2017, 13:20:19 UTC | phy.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - mark titles; - use :Author: for authorship; - mark literal blocks. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:57:58 UTC |
c437c3a | Mauro Carvalho Chehab | 16 May 2017, 13:14:12 UTC | percpu-rw-semaphore.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: This document is already adopting the standard format, with a single exception: we're using this convention for the document title: === foo === So, adjust the title of this document to follow the standard. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:57:58 UTC |
be9d041 | Mauro Carvalho Chehab | 17 May 2017, 14:21:45 UTC | parport-lowlevel.txt: standardize document format Each text file under Documentation follows a different format. This one uses a man-page like approach. Change its representation to be closer to the adopted standard, using ReST markups for it to be parseable by Sphinx: - Mark titles; - Mark literals and literal blocks; - Adjust identation. Still, the best would be to move its contents to kernel-docs. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:57:57 UTC |
7576b2b | Mauro Carvalho Chehab | 16 May 2017, 13:06:48 UTC | padata.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - mark document title; - mark literal blocks. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:57:56 UTC |
e4a5c33 | Mauro Carvalho Chehab | 16 May 2017, 13:04:34 UTC | numastat.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - mark the document title; - mark the table as such. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:57:56 UTC |
e386672 | Mauro Carvalho Chehab | 16 May 2017, 13:00:04 UTC | ntb.txt: standardize document format Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx. This file is using some other markup notation (likely, markdown). Convert it to the adopted standard: - Adjust the header level markup; - Adjust identation for debugfs files and module parameters. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 14 July 2017, 19:57:55 UTC |