| 0d8abbf | Padmavathi Venna | 04 March 2013, 05:34:28 UTC | Arm: socfpga: pl330: Add #dma-cells for generic dma binding support This patch adds #dma-cells property to PL330 DMA controller nodes for supporting generic dma dt bindings on SOCFPGA platform. #dma-channels and #dma-requests are not required now but added in advance. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 11 March 2013, 21:01:57 UTC |
| 7546152 | Arnd Bergmann | 11 March 2013, 20:55:40 UTC | Merge tag 'mvebu_fixes_for_v3.9' of git://git.infradead.org/users/jcooper/linux into fixes mvebu fixes for v3.9 from Jason Cooper <jason@lakedaemon.net>: The first four patches: 89c58c1 rtc: rtc-mv: Add support for clk to avoid lockups de88747 gpio: mvebu: Add clk support to prevent lockup 7bf5b40 ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels 93fff4c ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency are Cc'd to stable since they were held over from the previous merge window. The rest are a small collection of fixes and a couple of devicetree conversion catchups. * tag 'mvebu_fixes_for_v3.9' of git://git.infradead.org/users/jcooper/linux: arm: mach-orion5x: fix typo in compatible string of a .dts file arm: mvebu: fix address-cells in mpic DT node arm: plat-orion: fix address decoding when > 4GB is used arm: mvebu: Reduce reg-io-width with UARTs ARM: Dove: add RTC device node arm: mvebu: enable the USB ports on Armada 370 Reference Design board ARM: dove: drop "select COMMON_CLK_DOVE" rtc: rtc-mv: Add support for clk to avoid lockups gpio: mvebu: Add clk support to prevent lockup ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 11 March 2013, 20:55:40 UTC |
| 769aca0 | Arnd Bergmann | 11 March 2013, 20:53:35 UTC | Merge tag 'imx-fixes-3.9-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo <shawn.guo@linaro.org>: The 2nd take of imx fixes for 3.9: - Fix pll1_sys clk initial status - Fix a typo in imx DEBUG_LL Kconfig * tag 'imx-fixes-3.9-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART" ARM: imx: pll1_sys should be an initial on clk Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 11 March 2013, 20:53:35 UTC |
| fc77b0e | Arnd Bergmann | 11 March 2013, 20:52:28 UTC | Merge tag 'mxs-fixes-3.9-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo <shawn.guo@linaro.org>: The 2nd mxs fixes for 3.9: - Fix an error caused by incorrect conflict resolution when applying the patch * tag 'mxs-fixes-3.9-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: cfa10049: Fix fb initialisation function Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 11 March 2013, 20:52:57 UTC |
| 2a6ad87 | Maxime Ripard | 03 February 2013, 11:24:48 UTC | ARM: multiplatform: Sort the max gpio numbers. When building a multiplatform kernel, we could end up with a smaller number of GPIOs than the one required by the platform the kernel was running on. Sort the max GPIO number by descending order so that we always take the highest number required. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 11 March 2013, 20:49:46 UTC |
| 0c52db7 | Paul Bolle | 11 March 2013, 13:16:00 UTC | ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART" Commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) had a typo that DEBUG_IMX50_IMX53_UART should be DEBUG_IMX53_UART. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 11 March 2013, 13:28:18 UTC |
| 3958166 | Shawn Guo | 11 March 2013, 02:44:40 UTC | ARM: imx: pll1_sys should be an initial on clk We always boot from PLL1, so let's have pll1_sys in the clks_init_on list to have clk prepare/enable use count match the hardware status, so that drivers managing pll1_sys like cpufreq can get the use count right from the start. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 11 March 2013, 02:44:40 UTC |
| b2d5722 | Thomas Petazzoni | 06 March 2013, 10:23:36 UTC | arm: mach-orion5x: fix typo in compatible string of a .dts file The orion5x-lacie-ethernet-disk-mini-v2.dts file was using "marvell-orion5x-88f5182" as a compatible string, while it should have been "marvell,orion5x-88f5182". Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 22:19:42 UTC |
| 1b72b78 | Thomas Petazzoni | 06 March 2013, 10:23:35 UTC | arm: mvebu: fix address-cells in mpic DT node There is no need to have a #address-cells property in the MPIC Device Tree node, and more than that, having it confuses the of_irq_map_raw() logic, which will be used by the Marvell PCIe driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 22:15:54 UTC |
| 217bef3 | Thomas Petazzoni | 06 March 2013, 10:23:34 UTC | arm: plat-orion: fix address decoding when > 4GB is used During the system initialization, the orion_setup_cpu_mbus_target() function reads the SDRAM address decoding registers to find out how many chip-selects of SDRAM have been enabled, and builds a small array with one entry per chip-select. This array is then used by device drivers (XOR, Ethernet, etc.) to configure their own address decoding windows to the SDRAM. However, devices can only access the first 32 bits of the physical memory. Even though LPAE is not supported for now, some Marvell boards are now showing up with 8 GB of RAM, configured using two SDRAM address decoding windows: the first covering the first 4 GB, the second covering the last 4 GB. The array built by orion_setup_cpu_mbus_target() has therefore two entries, and device drivers try to set up two address decoding windows to the SDRAM. However, in the device registers for the address decoding, the base address is only 32 bits, so those two windows overlap each other, and the devices do not work at all. This patch makes sure that the array built by orion_setup_cpu_mbus_target() only contains the SDRAM decoding windows that correspond to the first 4 GB of the memory. To do that, it ignores the SDRAM decoding windows for which the 4 low-order bits are not zero (the 4 low-order bits of the base register are used to store bits 32:35 of the base address, so they actually indicate whether the base address is above 4 GB). This patch allows the newly introduced armada-xp-gp board to properly operate when it is mounted with more than 4 GB of RAM. Without that, all devices doing DMA (for example XOR and Ethernet) do not work at all. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 22:07:19 UTC |
| e366154 | Heikki Krogerus | 06 March 2013, 10:23:33 UTC | arm: mvebu: Reduce reg-io-width with UARTs Setting the reg-io-width to 1 byte represents more accurate description of the HW. This will fix an issue where UART driver causes kernel panic during bootup. Gregory CLEMENT traced the issue to autoconfig() in 8250.c, where the existence of FIFO is checked from UART_IIR register. The register is now read as 32-bit value as the reg-io-width is set to 4-bytes. The retuned value seems to contain bogus data for bits 31:8, causing the issue. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 22:03:44 UTC |
| 85c0c13 | Jean-Francois Moine | 08 March 2013, 11:13:17 UTC | ARM: Dove: add RTC device node The commit: 48be9ac ARM: Dove: split legacy and DT setup removed the RTC initialization. This patch re-enables the RTC via the DT. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 21:53:33 UTC |
| e822f75 | Florian Fainelli | 05 March 2013, 09:55:04 UTC | arm: mvebu: enable the USB ports on Armada 370 Reference Design board This patch modifies the Armada 370 Reference Design DTS file to enable support for the two USB ports found on this board. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 21:44:30 UTC |
| f3ae1ae | Paul Bolle | 05 March 2013, 20:17:17 UTC | ARM: dove: drop "select COMMON_CLK_DOVE" Commit 5b03df9ace680d7cdd34a69dfd85ca5f74159d18 ("ARM: dove: switch to DT clock providers") added "select COMMON_CLK_DOVE" to Marvell Dove's Kconfig entry. But there's no Kconfig symbol COMMON_CLK_DOVE, which makes this select statement a nop. It's probably a leftover of some experimental code that never hit mainline. Drop it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 21:34:49 UTC |
| 89c58c1 | Andrew Lunn | 03 February 2013, 11:32:06 UTC | rtc: rtc-mv: Add support for clk to avoid lockups The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the driver clk_prepare_enable() this clock, otherwise there is a danger the SoC will lockup when accessing RTC registers with the clock disabled. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 21:34:41 UTC |
| de88747 | Andrew Lunn | 03 February 2013, 10:34:26 UTC | gpio: mvebu: Add clk support to prevent lockup The kirkwood SoC GPIO cores use the runit clock. Add code to clk_prepare_enable() runit, otherwise there is a danger of locking up the SoC by accessing the GPIO registers when runit clock is not ticking. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 21:34:34 UTC |
| 7bf5b40 | Sebastian Hesselbarth | 30 January 2013, 20:29:58 UTC | ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels The ethernet controller used on kirkwood looses its MAC address register contents when the corresponding clock is gated. As soon as mv643xx_eth is built as module, the clock gets gated and when loading the module, the MAC address is gone. Proper DT support for the mv643xx_eth driver is expected soon, so we add a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround is also already used on non-DT kirkwood kernels. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 21:34:16 UTC |
| 93fff4c | Jason Cooper | 29 January 2013, 20:36:43 UTC | ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> | 08 March 2013, 21:32:52 UTC |
| 4a38a85 | Maxime Ripard | 05 March 2013, 15:13:35 UTC | ARM: mxs: cfa10049: Fix fb initialisation function Commit 1fe42740 ("ARM: dts: mxs: Add the LCD to the 10049 board") seem to have been applied with some fuzzyness, and the framebuffer initialisation code for the CFA-10049 ended up in the CFA-10037 initialisation function. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 07 March 2013, 02:54:23 UTC |
| 51c66cf | Paul Bolle | 05 March 2013, 09:13:39 UTC | ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" Do what commit f12a500e4adcc0961803e54b5ed1e74275d399f1 ("ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ") wanted to do. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 05 March 2013, 22:30:24 UTC |
| f01c287 | Arnd Bergmann | 05 March 2013, 22:22:00 UTC | Merge tag 'omap-for-v3.9-rc1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fix few regressions, omap3 pm init with device tree, and some issues with the legacy mux code. * tag 'omap-for-v3.9-rc1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: RX-51: add missing USB phy binding ARM: OMAP2+: Remove duplicate omap4430_init_late() declaration ARM: OMAP2+: mux: correct wrong error messages ARM: OMAP2+: mux: fix debugfs file permission ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial ARM: OMAP3: board-generic: Add missing omap3_init_late ARM: OMAP2+: Fix broken gpmc support ARM: OMAP1: Fix build related to kgdb.h no longer including serial_8250.h | 05 March 2013, 22:22:00 UTC |
| b0ad099 | Aaro Koskinen | 05 March 2013, 11:09:40 UTC | ARM: OMAP: RX-51: add missing USB phy binding Commit 51482be9 (ARM: OMAP: USB: Add phy binding information) forgot to add phy binding for RX-51, and as a result USB does not work anymore on 3.9-rc1. Add the missing binding. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 05 March 2013, 16:24:56 UTC |
| 4246a9c | Olof Johansson | 05 March 2013, 01:35:06 UTC | Merge tag 'mxs-fixes-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo: The mxs fixes for 3.9: - A few sparse warning fixes - Fix usb function regression caused by usb Kconfig option changes * tag 'mxs-fixes-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: ocotp: Fix sparse warning ARM: mxs: icoll: Fix sparse warning ARM: mxs: mm: Fix sparse warning ARM: mxs_defconfig: Make USB host functional again Signed-off-by: Olof Johansson <olof@lixom.net> | 05 March 2013, 01:35:15 UTC |
| 260a8e5 | Olof Johansson | 05 March 2013, 01:33:21 UTC | Merge tag 'imx-fixes-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo: The imx fixes for 3.9: - move early resume code out of .data section to fix allyesconfig failure since c08e20d (arm: Add v7_invalidate_l1 to cache-v7.S) gets merged - Fix incorrect DISP1_DAT_21 number in imx53-mba53 disp1-grp1 * tag 'imx-fixes-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx53-mba53: fix fsl,pins for disp1-grp1 ARM: mach-imx: move early resume code out of the .data section Signed-off-by: Olof Johansson <olof@lixom.net> | 05 March 2013, 01:35:01 UTC |
| 984b839 | Prashant Gaikwad | 01 March 2013, 18:32:25 UTC | clk: Tegra: Remove duplicate smp_twd clock Remove duplicate smp_twd clocks as these clocks are accessed using DT now. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 05 March 2013, 01:16:37 UTC |
| ed3ced3 | Prashant Gaikwad | 01 March 2013, 18:32:24 UTC | ARM: Tegra: Add clock entry for smp_twd clock As DT support for clocks and smp_twd is enabled, add clock entry for smp_twd clock to DT. This fixes the following error while booting the kernel: smp_twd: clock not found -2 Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: include kernel log spew that this fixes] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 05 March 2013, 01:16:36 UTC |
| 9e25fe6 | Nishanth Menon | 22 January 2013, 21:27:29 UTC | ARM: dts: remove generated .dtb files on clean commit 5f300acd8ae9f3d4585154370012ffc5c665330f (ARM: 7152/1: distclean: Remove generated .dtb files) ensured that dtbs were cleaned up when they were in arch/arm/boot. However, with the following commit: commit 499cd8298628eeabf0eb5eb6525d4faa0eec80d8 (ARM: dt: change .dtb build rules to build in dts directory) make clean now leaves dtbs in arch/arm/boot/dts/ untouched. Include dts directory so that clean-files rule from arch/arm/boot/dts/Makefile is invoked when make clean is done. Cc: Dirk Behme <dirk.behme@de.bosch.com> CC: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 05 March 2013, 01:15:35 UTC |
| 2837a1d | Stephen Warren | 22 February 2013, 05:42:38 UTC | ARM: bcm2835: fix I2C module clock rate BCM2835-ARM-Peripherals.pdf states that the I2C module's input clock is nominally 150MHz, and that value is currently reflected in bcm2835.dtsi. However, practical measurements show that the rate is actually 250MHz, and this agrees with various downstream kernels. Switch the I2C clock's frequency to 250MHz so that the generated bus clock rate is accurate. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Olof Johansson <olof@lixom.net> | 05 March 2013, 01:15:34 UTC |
| 91bdf0d | Javi Merino | 19 February 2013, 13:52:22 UTC | irqchip: fix typo when moving gic_raise_softirq() In b1cffebf (ARM: GIC: remove direct use of gic_raise_softirq) gic_raise_softirq() was moved inside arch/arm/common/gic.c but in the process it reverted by mistake a change to that function made by 384a290 (ARM: gic: use a private mapping for CPU target interfaces). This breaks multicluster systems on ARM. This patch fixes the typo. Signed-off-by: Javi Merino <javi.merino@arm.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 05 March 2013, 01:15:33 UTC |
| 08913c2 | Santosh Shilimkar | 08 February 2013, 15:11:45 UTC | ARM: OMAP2+: Remove duplicate omap4430_init_late() declaration Commit bbd707ac {ARM: omap2: use machine specific hook for late init} accidentally added two declarations for omap4430_init_late(). Remove the duplicate declaration. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 04 March 2013, 19:37:31 UTC |
| 39bb356 | Ruslan Bilovol | 03 February 2013, 00:15:10 UTC | ARM: OMAP2+: mux: correct wrong error messages This is needed because the omap_mux_get_by_name() function calls the _omap_mux_get_by_name subfunction for each mux partition until needed mux is not found. As a result, we get messages like "Could not find signal XXX" for each partition where this mux name does not exist. This patch fixes wrong error message in the _omap_mux_get_by_name() function moving it to the omap_mux_get_by_name() one and as result reduces noise in the kernel log. My kernel log without this patch: [...] [ 0.221801] omap_mux_init: Add partition: #2: wkup, flags: 3 [ 0.222045] _omap_mux_get_by_name: Could not find signal fref_clk0_out.sys_drm_msecure [ 0.222137] _omap_mux_get_by_name: Could not find signal sys_nirq [ 0.222167] _omap_mux_get_by_name: Could not find signal sys_nirq [ 0.225006] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.225006] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.270111] _omap_mux_get_by_name: Could not find signal fref_clk4_out.fref_clk4_out [ 0.273406] twl: not initialized [...] My kernel log with this patch: [...] [ 0.221771] omap_mux_init: Add partition: #2: wkup, flags: 3 [ 0.222106] omap_mux_get_by_name: Could not find signal sys_nirq [ 0.224945] omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx [ 0.274536] twl: not initialized [...] Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 04 March 2013, 19:37:31 UTC |
| 0fa26ce | Felipe Balbi | 19 February 2013, 10:24:23 UTC | ARM: OMAP2+: mux: fix debugfs file permission OMAP's debugfs interface creates one file for each signal in the mux table, such file provides a read method but didn't provide read permission. Fix it. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 04 March 2013, 19:19:23 UTC |
| 8a6201b | Tony Lindgren | 04 March 2013, 18:28:21 UTC | ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial We should not select drivers from kconfig as they should by default be optional. Otherwise we'll be chasing broken dependencies forever: warning: (MACH_OMAP_ZOOM2 && MACH_OMAP_ZOOM3 && MWAVE) selects SERIAL_8250 which has unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS) Fix the issue by removing the selects for zoom and add them to omap2plus_defconfig. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> | 04 March 2013, 19:19:22 UTC |
| 990fa4f | Rajendra Nayak | 19 February 2013, 12:58:31 UTC | ARM: OMAP3: board-generic: Add missing omap3_init_late The .init_late callback for OMAP3 has been missing for DT builds, which causes a lot of late PM initializations to be missed in turn. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 04 March 2013, 19:18:49 UTC |
| 31d9adc | Jon Hunter | 18 February 2013, 13:57:39 UTC | ARM: OMAP2+: Fix broken gpmc support Commit 6797b4fe (ARM: OMAP2+: Prevent potential crash if GPMC probe fails) added code to ensure that GPMC chip-selects could not be requested until the device probe was successful. The chip-selects should have been unreserved at the end of the probe function, but the code to unreserve them appears to have ended up in the gpmc_calc_timings() function and hence, this is causing problems requesting chip-selects. Fix this merge error by unreserving the chip-selects at the end of the probe, but before we call the gpmc child probe functions (for device-tree) which request a chip-select. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Philip Avinash <avinashphilip@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> [tony@atomide.com: updated description to add breaking commit id] Signed-off-by: Tony Lindgren <tony@atomide.com> | 04 March 2013, 19:12:16 UTC |
| 0adcbaf | Tony Lindgren | 11 February 2013, 22:46:00 UTC | ARM: OMAP1: Fix build related to kgdb.h no longer including serial_8250.h Commit 16559ae4 (kgdb: remove #include <linux/serial_8250.h> from kgdb.h) had a side effect of breaking omap1_defconfig build as some headers were included indirectly: arch/arm/mach-omap1/board-h2.c:249: error: ‘INT_KEYBOARD’ undeclared here (not in a function) ... This worked earlier as linux/serial_8250.h included linux/serial_core.h, via linux/serial_8250.h from linux/kgdb.h. Fix this by including the necessary headers directly. Signed-off-by: Tony Lindgren <tony@atomide.com> | 04 March 2013, 19:12:16 UTC |
| 95381f3 | Fabio Estevam | 11 February 2013, 14:01:48 UTC | ARM: mxs: ocotp: Fix sparse warning Include <mach/common.h> header to fix the following sparse warning: arch/arm/mach-mxs/ocotp.c:33:11: warning: symbol 'mxs_get_ocotp' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 04 March 2013, 02:07:28 UTC |
| f26b016 | Fabio Estevam | 11 February 2013, 14:01:47 UTC | ARM: mxs: icoll: Fix sparse warning Fix the following sparse warning: arch/arm/mach-mxs/icoll.c:103:13: warning: symbol 'icoll_of_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 04 March 2013, 02:07:20 UTC |
| bb39cdc | Fabio Estevam | 11 February 2013, 14:01:46 UTC | ARM: mxs: mm: Fix sparse warning Include <mach/common.h> header to fix the following sparse warnings: arch/arm/mach-mxs/mm.c:43:13: warning: symbol 'mx23_map_io' was not declared. Should it be static? arch/arm/mach-mxs/mm.c:48:13: warning: symbol 'mx28_map_io' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 04 March 2013, 02:07:13 UTC |
| f6c49da | Fabio Estevam | 27 February 2013, 17:03:58 UTC | ARM: mxs_defconfig: Make USB host functional again commit 09f6ffde2e (USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver) introduced CONFIG_USB_EHCI_HCD as a dependency for USB_CHIPIDEA_HOST. Select CONFIG_USB_EHCI_HCD, so that USB host can be functional again. Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 04 March 2013, 01:48:56 UTC |
| 0545c79 | Shawn Guo | 19 February 2013, 07:25:47 UTC | ARM: dts: imx53-mba53: fix fsl,pins for disp1-grp1 According to fsl,imx53-pinctrl.txt, the pin number of DISP1_DAT_21 should be 545, while 543 is IPU_CSI0_D_3. Along with the change, one duplication of DISP1_DAT_0 in disp1-grp1 is removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 04 March 2013, 01:20:15 UTC |
| b4e6153 | Nicolas Pitre | 19 February 2013, 04:11:30 UTC | ARM: mach-imx: move early resume code out of the .data section Building the kernel with allyesconfig fails because the i.mx early resume code located in the .data section is unable to fixup the bl relocation as the branch target gets too far away. The idea of having code in the .data section allows for easy access to nearby data using relative addressing while the MMU is off. However it is probably best to move the code back to the .text section where it belongs and fixup the data access instead. This solves the bl reloc issue (at least until this becomes a general problem) and simplifies the code as well. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> | 04 March 2013, 01:20:09 UTC |
| 6dbe51c | Linus Torvalds | 03 March 2013, 23:11:05 UTC | Linux 3.9-rc1 | 03 March 2013, 23:11:05 UTC |
| ea882c2 | Linus Torvalds | 03 March 2013, 22:24:59 UTC | Merge tag 'disintegrate-fbdev-20121220' of git://git.infradead.org/users/dhowells/linux-headers Pull fbdev UAPI disintegration from David Howells: "You'll be glad to here that the end is nigh for the UAPI patches. Only the fbdev/framebuffer piece remains now that the SCSI stuff has gone in. Here are the UAPI disintegration bits for the fbdev drivers. It appears that Florian hasn't had time to deal with my patch, but back in December he did say he didn't mind if I pushed it forward." Yay. No more uapi movement. And hopefully no more big header file cleanups coming up either, it just tends to be very painful. * tag 'disintegrate-fbdev-20121220' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/video | 03 March 2013, 22:24:59 UTC |
| 8e8b180 | Linus Torvalds | 03 March 2013, 22:22:53 UTC | Merge tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - Update the Xen ACPI memory and CPU hotplug locking mechanism. - Fix PAT issues wherein various applications would not start - Fix handling of multiple MSI as AHCI now does it. - Fix ARM compile failures. * tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus: fix compile failure on ARM with Xen enabled xen/pci: We don't do multiple MSI's. xen/pat: Disable PAT using pat_enabled value. xen/acpi: xen cpu hotplug minor updates xen/acpi: xen memory hotplug minor updates | 03 March 2013, 22:22:53 UTC |
| 56a79b7 | Linus Torvalds | 03 March 2013, 21:23:02 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more VFS bits from Al Viro: "Unfortunately, it looks like xattr series will have to wait until the next cycle ;-/ This pile contains 9p cleanups and fixes (races in v9fs_fid_add() etc), fixup for nommu breakage in shmem.c, several cleanups and a bit more file_inode() work" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: constify path_get/path_put and fs_struct.c stuff fix nommu breakage in shmem.c cache the value of file_inode() in struct file 9p: if v9fs_fid_lookup() gets to asking server, it'd better have hashed dentry 9p: make sure ->lookup() adds fid to the right dentry 9p: untangle ->lookup() a bit 9p: double iput() in ->lookup() if d_materialise_unique() fails 9p: v9fs_fid_add() can't fail now v9fs: get rid of v9fs_dentry 9p: turn fid->dlist into hlist 9p: don't bother with private lock in ->d_fsdata; dentry->d_lock will do just fine more file_inode() open-coded instances selinux: opened file can't have NULL or negative ->f_path.dentry (In the meantime, the hlist traversal macros have changed, so this required a semantic conflict fixup for the newly hlistified fid->dlist) | 03 March 2013, 21:23:03 UTC |
| 1c82315 | Linus Torvalds | 03 March 2013, 21:13:20 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixup from Chris Mason: "Geert and James both sent this one in, sorry guys" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs/raid56: Add missing #include <linux/vmalloc.h> | 03 March 2013, 21:13:20 UTC |
| 530ede1 | Linus Torvalds | 03 March 2013, 20:58:43 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull second set of s390 patches from Martin Schwidefsky: "The main part of this merge are Heikos uaccess patches. Together with commit 09884964335e ("mm: do not grow the stack vma just because of an overrun on preceding vma") the user string access is hopefully fixed for good. In addition some bug fixes and two cleanup patches." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/module: fix compile warning qdio: remove unused parameters s390/uaccess: fix kernel ds access for page table walk s390/uaccess: fix strncpy_from_user string length check input: disable i8042 PC Keyboard controller for s390 s390/dis: Fix invalid array size s390/uaccess: remove pointless access_ok() checks s390/uaccess: fix strncpy_from_user/strnlen_user zero maxlen case s390/uaccess: shorten strncpy_from_user/strnlen_user s390/dasd: fix unresponsive device after all channel paths were lost s390/mm: ignore change bit for vmemmap s390/page table dumper: add support for change-recording override bit | 03 March 2013, 20:58:43 UTC |
| 6977c6f | Linus Torvalds | 03 March 2013, 20:57:38 UTC | Merge branch 'fixes-for-3.9-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull second round of PARISC updates from Helge Deller: "The most important fix in this branch is the switch of io_setup, io_getevents and io_submit syscalls to use the available compat syscalls when running 32bit userspace on 64bit kernel. Other than that it's mostly removal of compile warnings." * 'fixes-for-3.9-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix redefinition of SET_PERSONALITY parisc: do not install modules when installing kernel parisc: fix compile warnings triggered by atomic_sub(sizeof(),v) parisc: check return value of down_interruptible() in hp_sdc_rtc.c parisc: avoid unitialized variable warning in pa_memcpy() parisc: remove unused variable 'compat_val' parisc: switch to compat_functions of io_setup, io_getevents and io_submit parisc: select ARCH_WANT_FRAME_POINTERS | 03 March 2013, 20:57:38 UTC |
| 8fd5e7a | Linus Torvalds | 03 March 2013, 20:06:09 UTC | Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull new ImgTec Meta architecture from James Hogan: "This adds core architecture support for Imagination's Meta processor cores, followed by some later miscellaneous arch/metag cleanups and fixes which I kept separate to ease review: - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture - A few fixes all over, particularly for symbol prefixes - A few privilege protection fixes - Several cleanups (setup.c includes, split out a lot of metag_ksyms.c) - Fix some missing exports - Convert hugetlb to use vm_unmapped_area() - Copy device tree to non-init memory - Provide dma_get_sgtable()" * tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits) metag: Provide dma_get_sgtable() metag: prom.h: remove declaration of metag_dt_memblock_reserve() metag: copy devicetree to non-init memory metag: cleanup metag_ksyms.c includes metag: move mm/init.c exports out of metag_ksyms.c metag: move usercopy.c exports out of metag_ksyms.c metag: move setup.c exports out of metag_ksyms.c metag: move kick.c exports out of metag_ksyms.c metag: move traps.c exports out of metag_ksyms.c metag: move irq enable out of irqflags.h on SMP genksyms: fix metag symbol prefix on crc symbols metag: hugetlb: convert to vm_unmapped_area() metag: export clear_page and copy_page metag: export metag_code_cache_flush_all metag: protect more non-MMU memory regions metag: make TXPRIVEXT bits explicit metag: kernel/setup.c: sort includes perf: Enable building perf tools for Meta metag: add boot time LNKGET/LNKSET check metag: add __init to metag_cache_probe() ... | 03 March 2013, 20:06:09 UTC |
| 529e5fb | Linus Torvalds | 03 March 2013, 19:54:39 UTC | Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull late ARM updates from Russell King: "Here is the late set of ARM updates for this merge window; in here is: - The ARM parts of the broadcast timer support, core parts merged through tglx's tree. This was left over from the previous merge to allow the dependency on tglx's tree to be resolved. - A fix to the VFP code which shows up on Raspberry Pi's, as well as fixing the fallout from a previous commit in this area. - A number of smaller fixes scattered throughout the ARM tree" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: Fix broken commit 0cc41e4a21d43 corrupting kernel messages ARM: fix scheduling while atomic warning in alignment handling code ARM: VFP: fix emulation of second VFP instruction ARM: 7656/1: uImage: Error out on build of multiplatform without LOADADDR ARM: 7640/1: memory: tegra_ahb_enable_smmu() depends on TEGRA_IOMMU_SMMU ARM: 7654/1: Preserve L_PTE_VALID in pte_modify() ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock ARM: 7651/1: remove unused smp_timer_broadcast #define | 03 March 2013, 19:54:39 UTC |
| 686c094 | Linus Torvalds | 03 March 2013, 18:25:47 UTC | Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc patch from Greg Kroah-Hartman: "Here is one remaining patch for 3.9-rc1. It is for the hyper-v drivers, and had to wait until some other patches went in through the x86 tree." Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: vmbus: Use the new infrastructure for delivering VMBUS interrupts | 03 March 2013, 18:25:47 UTC |
| bc2e4a9 | Linus Torvalds | 03 March 2013, 18:24:57 UTC | Merge tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patch revert from Greg Kroah-Hartman: "Here is one remaining USB patch for 3.9-rc1, it reverts a 3.8 patch that has caused a lot of regressions for some VIA EHCI controllers." * tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: EHCI: revert "remove ASS/PSS polling timeout" | 03 March 2013, 18:24:57 UTC |
| 68b86a2 | Linus Torvalds | 03 March 2013, 18:23:29 UTC | Merge git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: "This contains: - fixes and improvements - devicetree bindings - conversion to watchdog generic framework of the following drivers: - booke_wdt - bcm47xx_wdt.c - at91sam9_wdt - Removal of old STMP3xxx driver - Addition of following new drivers: - new driver for STMP3xxx and i.MX23/28 - Retu watchdog driver" * git://www.linux-watchdog.org/linux-watchdog: (30 commits) watchdog: sp805_wdt depends on ARM watchdog: davinci_wdt: update to devm_* API watchdog: davinci_wdt: use devm managed clk get watchdog: at91rm9200: add DT support watchdog: add timeout-sec property binding watchdog: at91sam9_wdt: Convert to use the watchdog framework watchdog: omap_wdt: Add option nowayout watchdog: core: dt: add support for the timeout-sec dt property watchdog: bcm47xx_wdt.c: add hard timer watchdog: bcm47xx_wdt.c: rename wdt_time to timeout watchdog: bcm47xx_wdt.c: rename ops methods watchdog: bcm47xx_wdt.c: use platform device watchdog: bcm47xx_wdt.c: convert to watchdog core api watchdog: Convert BookE watchdog driver to watchdog infrastructure watchdog: s3c2410_wdt: Use devm_* functions watchdog: remove old STMP3xxx driver watchdog: add new driver for STMP3xxx and i.MX23/28 rtc: stmp3xxx: add wdt-accessor function watchdog: introduce retu_wdt driver watchdog: intel_scu_watchdog: fix Kconfig dependency ... | 03 March 2013, 18:23:29 UTC |
| 527c680 | Linus Torvalds | 03 March 2013, 18:20:22 UTC | Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma Pull second set of slave-dmaengine updates from Vinod Koul: "Arnd's patch moves the dw_dmac to use generic DMA binding. I agreed to merge this late as it will avoid the conflicts between trees. The second patch from Matt adding a dma_request_slave_channel_compat API was supposed to be picked up, but somehow never got picked up. Some patches dependent on this are already in -next :(" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw_dmac: move to generic DMA binding dmaengine: add dma_request_slave_channel_compat() | 03 March 2013, 18:20:22 UTC |
| 23caaee | Linus Torvalds | 03 March 2013, 18:16:19 UTC | Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86 Pull x86 platform driver updates from Matthew Garrett: "Mostly relatively small updates, along with some hardware enablement for Sony hardware and a pile of updates to Google's Chromebook driver" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (49 commits) ideapad-laptop: Depend on BACKLIGHT_CLASS_DEVICE instead of selecting it ideapad: depends on backlight subsystem and update comment Platform: x86: chromeos_laptop - add i915 gmbuses to adapter names Platform: x86: chromeos_laptop - Add isl light sensor for Pixel Platform: x86: chromeos_laptop - Add a more general add_i2c_device Platform: x86: chromeos_laptop - Add Pixel Touchscreen Platform: x86: chromeos_laptop - Add support for probing devices Platform: x86: chromeos_laptop - Add Pixel Trackpad hp-wmi: fix handling of platform device sony-laptop: leak in error handling sony_nc_lid_resume_setup() hp-wmi: Add support for SMBus hotkeys asus-wmi: Fix unused function build warning acer-wmi: avoid the warning of 'devices' may be used uninitialized drivers/platform/x86/thinkpad_acpi.c: Handle HKEY event 0x6040 Platform: x86: chromeos_laptop - Add HP Pavilion 14 Platform: x86: chromeos_laptop - Add Taos tsl2583 device Platform: x86: chromeos_laptop - Add Taos tsl2563 device Platform: x86: chromeos_laptop - Add Acer C7 trackpad Platform: x86: chromeos_laptop - Rename setup_lumpy_tp to setup_cyapa_smbus_tp asus-laptop: always report brightness key events ... | 03 March 2013, 18:16:19 UTC |
| d7011f5 | Geert Uytterhoeven | 03 March 2013, 11:44:41 UTC | btrfs/raid56: Add missing #include <linux/vmalloc.h> tilegx_defconfig: fs/btrfs/raid56.c: In function 'btrfs_alloc_stripe_hash_table': fs/btrfs/raid56.c:206:3: error: implicit declaration of function 'vzalloc' [-Werror=implicit-function-declaration] fs/btrfs/raid56.c:206:9: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/raid56.c:226:4: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Chris Mason <chris.mason@fusionio.com> | 03 March 2013, 11:53:41 UTC |
| a7c1120 | Linus Torvalds | 03 March 2013, 03:33:21 UTC | Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bug fixes from Ted Ts'o: "Various bug fixes for ext4. The most important is a fix for the new extent cache's slab shrinker which can cause significant, user-visible pauses when the system is under memory pressure." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: enable quotas before orphan cleanup ext4: don't allow quota mount options when quota feature enabled ext4: fix a warning from sparse check for ext4_dir_llseek ext4: convert number of blocks to clusters properly ext4: fix possible memory leak in ext4_remount() jbd2: fix ERR_PTR dereference in jbd2__journal_start ext4: use percpu counter for extent cache count ext4: optimize ext4_es_shrink() | 03 March 2013, 03:33:21 UTC |
| 6ec40b4 | Linus Torvalds | 03 March 2013, 03:32:06 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull sigprocmask compat fix from Al Viro: "generic compat_sys_rt_sigprocmask() had a very dumb braino; I'd spent quite a while staring at the offending commit before finally managing to spot the idiocy ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: fix compat_sys_rt_sigprocmask() | 03 March 2013, 03:32:06 UTC |
| db61ec2 | Al Viro | 03 March 2013, 01:39:15 UTC | fix compat_sys_rt_sigprocmask() Converting bitmask to 32bit granularity is fine, but we'd better _do_ something with the result. Such as "copy it to userland"... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 03 March 2013, 01:39:15 UTC |
| 8d05b37 | Linus Torvalds | 03 March 2013, 00:46:07 UTC | Merge tag 'nfs-for-3.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: "We've just concluded another Connectathon interoperability testing week, and so here are the fixes for the bugs that were discovered: - Don't allow NFS silly-renamed files to be deleted - Don't start the retransmission timer when out of socket space - Fix a couple of pnfs-related Oopses. - Fix one more NFSv4 state recovery deadlock - Don't loop forever when LAYOUTGET returns NFS4ERR_LAYOUTTRYLATER" * tag 'nfs-for-3.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: One line comment fix NFSv4.1: LAYOUTGET EDELAY loops timeout to the MDS SUNRPC: add call to get configured timeout PNFS: set the default DS timeout to 60 seconds NFSv4: Fix another open/open_recovery deadlock nfs: don't allow nfs_find_actor to match inodes of the wrong type NFSv4.1: Hold reference to layout hdr in layoutget pnfs: fix resend_to_mds for directio SUNRPC: Don't start the retransmission timer when out of socket space NFS: Don't allow NFS silly-renamed files to be deleted, no signal | 03 March 2013, 00:46:07 UTC |
| b695188 | Linus Torvalds | 03 March 2013, 00:41:54 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs update from Chris Mason: "The biggest feature in the pull is the new (and still experimental) raid56 code that David Woodhouse started long ago. I'm still working on the parity logging setup that will avoid inconsistent parity after a crash, so this is only for testing right now. But, I'd really like to get it out to a broader audience to hammer out any performance issues or other problems. scrub does not yet correct errors on raid5/6 either. Josef has another pass at fsync performance. The big change here is to combine waiting for metadata with waiting for data, which is a big latency win. It is also step one toward using atomics from the hardware during a commit. Mark Fasheh has a new way to use btrfs send/receive to send only the metadata changes. SUSE is using this to make snapper more efficient at finding changes between snapshosts. Snapshot-aware defrag is also included. Otherwise we have a large number of fixes and cleanups. Eric Sandeen wins the award for removing the most lines, and I'm hoping we steal this idea from XFS over and over again." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (118 commits) btrfs: fixup/remove module.h usage as required Btrfs: delete inline extents when we find them during logging btrfs: try harder to allocate raid56 stripe cache Btrfs: cleanup to make the function btrfs_delalloc_reserve_metadata more logic Btrfs: don't call btrfs_qgroup_free if just btrfs_qgroup_reserve fails Btrfs: remove reduplicate check about root in the function btrfs_clean_quota_tree Btrfs: return ENOMEM rather than use BUG_ON when btrfs_alloc_path fails Btrfs: fix missing deleted items in btrfs_clean_quota_tree btrfs: use only inline_pages from extent buffer Btrfs: fix wrong reserved space when deleting a snapshot/subvolume Btrfs: fix wrong reserved space in qgroup during snap/subv creation Btrfs: remove unnecessary dget_parent/dput when creating the pending snapshot btrfs: remove a printk from scan_one_device Btrfs: fix NULL pointer after aborting a transaction Btrfs: fix memory leak of log roots Btrfs: copy everything if we've created an inline extent btrfs: cleanup for open-coded alignment Btrfs: do not change inode flags in rename Btrfs: use reserved space for creating a snapshot clear chunk_alloc flag on retryable failure ... | 03 March 2013, 00:41:54 UTC |
| 48476df | Linus Torvalds | 03 March 2013, 00:33:54 UTC | Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd Pull MTD update from David Woodhouse: "Fairly unexciting MTD merge for 3.9: - misc clean-ups in the MTD command-line partitioning parser (cmdlinepart) - add flash locking support for STmicro chips serial flash chips, as well as for CFI command set 2 chips. - new driver for the ELM error correction HW module found in various TI chips, enable the OMAP NAND driver to use the ELM HW error correction - added number of new serial flash IDs - various fixes and improvements in the gpmi NAND driver - bcm47xx NAND driver improvements - make the mtdpart module actually removable" * tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits) mtd: map: BUG() in non handled cases mtd: bcm47xxnflash: use pr_fmt for module prefix in messages mtd: davinci_nand: Use managed resources mtd: mtd_torturetest can cause stack overflows mtd: physmap_of: Convert device allocation to managed devm_kzalloc() mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement. mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional. mtd: atmel_nand: avoid to report an error when lookup table offset is 0. mtd: bcm47xxsflash: adjust names of bus-specific functions mtd: bcm47xxpart: improve probing of nvram partition mtd: bcm47xxpart: add support for other erase sizes mtd: bcm47xxnflash: register this as normal driver mtd: bcm47xxnflash: fix message mtd: bcm47xxsflash: register this as normal driver mtd: bcm47xxsflash: write number of written bytes mtd: gpmi: add sanity check for the ECC mtd: gpmi: set the Golois Field bit for mx6q's BCH mtd: devices: elm: Removes <xx> literals in elm DT node mtd: gpmi: fix a dereferencing freed memory error mtd: fix the wrong timeo for panic_nand_wait() ... | 03 March 2013, 00:33:54 UTC |
| 16af43f | Russell King | 03 March 2013, 00:32:50 UTC | Merge branches 'devel-stable', 'fixes' and 'mmci' into for-linus | 03 March 2013, 00:32:50 UTC |
| 512e4b2 | Trond Myklebust | 02 March 2013, 23:54:11 UTC | SUNRPC: One line comment fix Reported-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> | 02 March 2013, 23:54:11 UTC |
| 9b2ff35 | Jan Kara | 02 March 2013, 23:22:38 UTC | ext4: enable quotas before orphan cleanup When using quota feature we need to enable quotas before orphan cleanup so that changes happening during it are properly reflected in quota accounting. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> | 02 March 2013, 23:22:38 UTC |
| 262b466 | Jan Kara | 02 March 2013, 22:57:08 UTC | ext4: don't allow quota mount options when quota feature enabled So far we silently ignored when quota mount options were set while quota feature was enabled. But this can create confusion in userspace when mount options are set but silently ignored and also creates opportunities for bugs when we don't properly test all quota types. Actually ext4_mark_dquot_dirty() forgets to test for quota feature so it was dependent on journaled quota options being set. OTOH ext4_orphan_cleanup() tries to enable journaled quota when quota options are specified which is wrong when quota feature is enabled. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> | 02 March 2013, 22:57:08 UTC |
| d4e4395 | Zheng Liu | 02 March 2013, 22:24:05 UTC | ext4: fix a warning from sparse check for ext4_dir_llseek ext4_dir_llseek is only used as a callback function, and no one calls it directly. So make it as a static function in order to remove a warning message from sparse check. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> | 02 March 2013, 22:24:05 UTC |
| 810da24 | Lukas Czerner | 02 March 2013, 22:18:58 UTC | ext4: convert number of blocks to clusters properly We're using macro EXT4_B2C() to convert number of blocks to number of clusters for bigalloc file systems. However, we should be using EXT4_NUM_B2C(). Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org | 02 March 2013, 22:18:58 UTC |
| 3e36a16 | Wei Yongjun | 02 March 2013, 22:13:55 UTC | ext4: fix possible memory leak in ext4_remount() 'orig_data' is malloced in ext4_remount() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Cc: stable@vger.kernel.org | 02 March 2013, 22:13:55 UTC |
| df05c1b | Dmitry Monakhov | 02 March 2013, 22:08:46 UTC | jbd2: fix ERR_PTR dereference in jbd2__journal_start If start_this_handle() failed handle will be initialized to ERR_PTR() and can not be dereferenced. paging request at fffffffffffffff6 IP: [<ffffffff813c073f>] jbd2__journal_start+0x18f/0x290 PGD 200e067 PUD 200f067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod CPU 0 journal commit I/O error Pid: 2694, comm: fio Not tainted 3.8.0-rc3+ #79 /DQ67SW RIP: 0010:[<ffffffff813c073f>] [<ffffffff813c073f>] jbd2__journal_start+0x18f/0x290 RSP: 0018:ffff880233b8ba58 EFLAGS: 00010292 RAX: 00000000ffffffe2 RBX: ffffffffffffffe2 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff82128f48 RBP: ffff880233b8ba98 R08: 0000000000000000 R09: ffff88021440a6e0 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> | 02 March 2013, 22:08:46 UTC |
| c60ac31 | James Hogan | 19 February 2013, 13:25:46 UTC | metag: Provide dma_get_sgtable() metag/allmodconfig: drivers/media/v4l2-core/videobuf2-dma-contig.c: In function 'vb2_dc_get_base_sgt': drivers/media/v4l2-core/videobuf2-dma-contig.c:387: error: implicit declaration of function 'dma_get_sgtable' For architectures using dma_map_ops, dma_get_sgtable() is provided in <asm-generic/dma-mapping-common.h>. Metag does not use dma_map_ops yet, hence it should implement it as an inline stub using dma_common_get_sgtable(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> | 02 March 2013, 20:11:17 UTC |
| 2742c52 | James Hogan | 20 February 2013, 14:19:54 UTC | metag: prom.h: remove declaration of metag_dt_memblock_reserve() Metag doesn't have a metag_dt_memblock_reserve() function so remove the declaration from asm/prom.h. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:17 UTC |
| 2270e6d | James Hogan | 20 February 2013, 13:59:13 UTC | metag: copy devicetree to non-init memory Make a copy of the device tree blob in non-init memory. It is required when using built-in device tree files that the platform code copies the blob to non-init memory prior to calling unflatten_device_tree(), otherwise the strings that the device tree refer to will get poisoned and potentially reused, breaking later reading of the device tree post-init (such as compatible matching in modules, debugfs, and the procfs interface). Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Vineet Gupta <vgupta@synopsys.com> | 02 March 2013, 20:11:17 UTC |
| d790050 | James Hogan | 13 February 2013, 13:30:15 UTC | metag: cleanup metag_ksyms.c includes Minimise metag_ksyms.c includes to directly include the <asm/*.h> files that declare a particular symbol, and not include any unnecessary ones. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:16 UTC |
| 44c2451 | James Hogan | 13 February 2013, 13:19:15 UTC | metag: move mm/init.c exports out of metag_ksyms.c It's less error prone to have function symbols exported immediately after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL in metag_ksyms.c for symbols defined in mm/init.c into mm/init.c. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:16 UTC |
| 9da3ee9 | James Hogan | 13 February 2013, 12:57:10 UTC | metag: move usercopy.c exports out of metag_ksyms.c It's less error prone to have function symbols exported immediately after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL in metag_ksyms.c for symbols defined in usercopy.c into usercopy.c Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:15 UTC |
| 7293dbe | James Hogan | 13 February 2013, 12:55:51 UTC | metag: move setup.c exports out of metag_ksyms.c It's less error prone to have function symbols exported immediately after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL in metag_ksyms.c for symbols defined in setup.c into setup.c Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:15 UTC |
| aa29ec5 | James Hogan | 13 February 2013, 13:01:55 UTC | metag: move kick.c exports out of metag_ksyms.c It's less error prone to have function symbols exported immediately after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL in metag_ksyms.c for symbols defined in kick.c into kick.c Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:15 UTC |
| 9fb4aa8 | James Hogan | 13 February 2013, 12:19:03 UTC | metag: move traps.c exports out of metag_ksyms.c It's less error prone to have function symbols exported immediately after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL in metag_ksyms.c for symbols defined in traps.c into traps.c Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:14 UTC |
| fa771d0 | James Hogan | 12 February 2013, 16:04:53 UTC | metag: move irq enable out of irqflags.h on SMP The SMP version of arch_local_irq_enable() uses preempt_disable(), but <asm/irqflags.h> doesn't include <linux/preempt.h> causing the following errors on SMP when pstore/ftrace is enabled (caught by buildbot smp allyesconfig): In file included from include/linux/irqflags.h:15, from fs/pstore/ftrace.c:16: arch/metag/include/asm/irqflags.h: In function 'arch_local_irq_enable': arch/metag/include/asm/irqflags.h:84: error: implicit declaration of function 'preempt_disable' arch/metag/include/asm/irqflags.h:86: error: implicit declaration of function 'preempt_enable_no_resched' However <linux/preempt.h> cannot be easily included from <asm/irqflags.h> as it can cause circular include dependencies in the !SMP case, and potentially in the SMP case in the future. Therefore move the SMP implementation of arch_local_irq_enable() into traps.c and use an inline version of get_trigger_mask() which is also defined in traps.c for SMP. This adds an extra layer of function call / stack push when preempt_disable needs to call other functions, however in the non-preemptive SMP case it should be about as fast, as it was already calling the get_trigger_mask() function which is now used inline. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:14 UTC |
| 97c3ec6 | James Hogan | 11 February 2013, 15:40:24 UTC | genksyms: fix metag symbol prefix on crc symbols Meta uses symbol prefixes, so add "metag" to the list of architectures to set the mod_prefix to "_" for. This fixes __crc_* symbols to add the extra underscore to match _CRC_SYMBOL macro in <linux/export.h> and so that modpost finds them. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:13 UTC |
| f75c28d | James Hogan | 11 February 2013, 17:28:10 UTC | metag: hugetlb: convert to vm_unmapped_area() Convert hugetlb_get_unmapped_area_new_pmd() to use vm_unmapped_area() rather than searching the virtual address space itself. This fixes the following errors in linux-next due to the specified members being removed after other architectures have already been converted: arch/metag/mm/hugetlbpage.c: In function 'hugetlb_get_unmapped_area_new_pmd': arch/metag/mm/hugetlbpage.c:199: error: 'struct mm_struct' has no member named 'cached_hole_size' arch/metag/mm/hugetlbpage.c:200: error: 'struct mm_struct' has no member named 'free_area_cache' arch/metag/mm/hugetlbpage.c:215: error: 'struct mm_struct' has no member named 'cached_hole_size' Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Michel Lespinasse <walken@google.com> | 02 March 2013, 20:11:13 UTC |
| c838e72 | James Hogan | 11 February 2013, 11:47:02 UTC | metag: export clear_page and copy_page Various file systems use clear_page() and copy_page(), so when they're built as modules we get build errors like the following: ERROR: "clear_page" [fs/ntfs/ntfs.ko] undefined! ERROR: "copy_page" [fs/nilfs2/nilfs2.ko] undefined! Therefore export these functions to modules from metag_ksyms.c to fix the errors. This was hit by a randconfig build. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:13 UTC |
| f626dc7 | James Hogan | 11 February 2013, 11:43:20 UTC | metag: export metag_code_cache_flush_all Various file systems indirectly use metag_code_cache_flush_all(), so when they're built as modules we get build errors like the following: ERROR: "metag_code_cache_flush_all" [fs/xfs/xfs.ko] undefined! Therefore export this function to modules to fix the errors. This was hit by a randconfig build. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:11:12 UTC |
| 3d6b7bb | James Hogan | 31 January 2013, 13:42:03 UTC | metag: protect more non-MMU memory regions Rename setup_txprivext() to setup_priv() and add initialisation of some more per-thread privilege protection registers: - TxPRIVSYSR: 0x04400000-0x047fffff 0x05000000-0x07ffffff 0x84000000-0x87ffffff - TxPIOREG: 0x02000000-0x02ffffff 0x04800000-0x048fffff - TxSYREG: 0x04000000-0x04000fff (except write fetch system event) Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:09:58 UTC |
| c787c2d | James Hogan | 31 January 2013, 13:27:35 UTC | metag: make TXPRIVEXT bits explicit Define PRIV_BITS using explicit constants from <asm/metag_regs.h> rather than with a hard coded value. This also adds a couple of missing definitions for the TXPRIVEXT priv bits for protecting writes to TXTIMER and the trace registers. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:09:58 UTC |
| 82f0167 | James Hogan | 31 January 2013, 13:38:48 UTC | metag: kernel/setup.c: sort includes Sort includes in kernel/setup.c. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:09:57 UTC |
| 1bea5b8 | James Hogan | 31 January 2013, 12:22:37 UTC | perf: Enable building perf tools for Meta Define rmb(), cpu_relax(), and CPUINFO_PROC for Meta so that the perf tools can be built for Meta. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> | 02 March 2013, 20:09:57 UTC |
| 883a635 | James Hogan | 31 January 2013, 11:06:03 UTC | metag: add boot time LNKGET/LNKSET check Add boot time check for whether LNKGET/LNKSET go through or around the cache. Depending on the configuration an info message (no harm), warning (technically wrong but no harm), or big WARN (expect failure in either kernel or userland) may be emitted if the behaviour is not as expected: Configuration Hardware Response ------------------------------------------ -------- -------- AROUND_CACHE through pr_info !AROUND_CACHE && ATOMICITY_LNKGET around WARN (kernel) " && !ATOMICITY_LNKGET && SMP around WARN (user) " " && !SMP around pr_warn Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:09:56 UTC |
| 0a38a8a | James Hogan | 31 January 2013, 11:04:49 UTC | metag: add __init to metag_cache_probe() metag_cache_probe() is only called from setup_arch(), so add the __init attribute to it. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:09:56 UTC |
| ae85ac7 | James Hogan | 21 September 2012, 16:38:15 UTC | metag: Add JTAG Debug Adapter (DA) support Add basic JTAG Debug Adapter (DA) support so that drivers which communicate with the DA can detect whether one is actually present (otherwise the target will halt indefinitely). This allows the metag_da TTY driver and imgdafs filesystem driver to be built, updates defconfigs, and sets up the metag_da console early if it's configured in. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:09:56 UTC |
| 690998b | James Hogan | 17 October 2012, 14:21:13 UTC | scripts/checkstack.pl: Add metag support Adapt checkstack.pl so that it works for metag. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:09:55 UTC |
| 00512bd | James Hogan | 05 October 2012, 15:27:31 UTC | metag: ftrace support Add ftrace support for metag. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> | 02 March 2013, 20:09:55 UTC |
| 903b20a | James Hogan | 05 October 2012, 15:54:55 UTC | metag: Perf Add Perf support for metag. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> | 02 March 2013, 20:09:54 UTC |
| 5633004 | James Hogan | 09 October 2012, 09:54:32 UTC | metag: Build infrastructure Add metag build infrastructure. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:09:54 UTC |
| 79f83c0 | James Hogan | 05 December 2012, 11:34:13 UTC | Kconfig.debug: add METAG to dependency lists Add [!]METAG to a couple of Kconfig dependencies in lib/Kconfig.debug. Don't allow stack utilization instrumentation on metag, and allow building with frame pointers. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Paul E. McKenney" <paul.mckenney@linaro.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> | 02 March 2013, 20:09:53 UTC |
| 9ca52ed | James Hogan | 16 October 2012, 09:16:14 UTC | mm: define VM_GROWSUP for CONFIG_METAG Commit cc2383ec06be093789469852e1fe96e1148e9a2c ("mm: introduce arch-specific vma flag VM_ARCH_1") merged in v3.7-rc1. The above commit combined several arch-specific vma flags into one, and in the process it changed the VM_GROWSUP definition to depend on specific architectures rather than CONFIG_STACK_GROWSUP. Therefore add an ifdef for CONFIG_METAG to also set VM_GROWSUP. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-mm@kvack.org | 02 March 2013, 20:09:53 UTC |
| 1e57372 | James Hogan | 05 October 2012, 15:22:14 UTC | metag: Various other headers Add the remaining metag header files: - byteorder.h, swab.h (byte order and swapping) - barrier.h, cpu.h. hwthread.h, processor.h (hardware thread related) - bug.h, elf.h, gpio.h, linkage.h, resource.h (other) Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:09:52 UTC |
| e8de348 | James Hogan | 05 October 2012, 16:01:38 UTC | metag: Stack unwinding Add stack unwinding support for metag. Signed-off-by: James Hogan <james.hogan@imgtec.com> | 02 March 2013, 20:09:52 UTC |
