Revision 0dc9cad22d5c878d2ce6ee7b5cfffb034e34b2a0 authored by Junio C Hamano on 31 May 2024, 00:00:29 UTC, committed by Junio C Hamano on 31 May 2024, 00:00:29 UTC
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-archive.txt
git-archive(1)
==============
NAME
----
git-archive - Create an archive of files from a named tree
SYNOPSIS
--------
[verse]
'git archive' [--format=<fmt>] [--list] [--prefix=<prefix>/] [<extra>]
[-o <file> | --output=<file>] [--worktree-attributes]
[--remote=<repo> [--exec=<git-upload-archive>]] <tree-ish>
[<path>...]
DESCRIPTION
-----------
Creates an archive of the specified format containing the tree
structure for the named tree, and writes it out to the standard
output. If <prefix> is specified it is
prepended to the filenames in the archive.
'git archive' behaves differently when given a tree ID versus when
given a commit ID or tag ID. In the first case the current time is
used as the modification time of each file in the archive. In the latter
case the commit time as recorded in the referenced commit object is
used instead. Additionally the commit ID is stored in a global
extended pax header if the tar format is used; it can be extracted
using 'git get-tar-commit-id'. In ZIP files it is stored as a file
comment.
OPTIONS
-------
--format=<fmt>::
Format of the resulting archive. Possible values are `tar`,
`zip`, `tar.gz`, `tgz`, and any format defined using the
configuration option `tar.<format>.command`. If `--format`
is not given, and the output file is specified, the format is
inferred from the filename if possible (e.g. writing to `foo.zip`
makes the output to be in the `zip` format). Otherwise the output
format is `tar`.
-l::
--list::
Show all available formats.
-v::
--verbose::
Report progress to stderr.
--prefix=<prefix>/::
Prepend <prefix>/ to paths in the archive. Can be repeated; its
rightmost value is used for all tracked files. See below which
value gets used by `--add-file` and `--add-virtual-file`.
-o <file>::
--output=<file>::
Write the archive to <file> instead of stdout.
--add-file=<file>::
Add a non-tracked file to the archive. Can be repeated to add
multiple files. The path of the file in the archive is built by
concatenating the value of the last `--prefix` option (if any)
before this `--add-file` and the basename of <file>.
--add-virtual-file=<path>:<content>::
Add the specified contents to the archive. Can be repeated to add
multiple files. The path of the file in the archive is built
by concatenating the value of the last `--prefix` option (if any)
before this `--add-virtual-file` and `<path>`.
+
The `<path>` argument can start and end with a literal double-quote
character; the contained file name is interpreted as a C-style string,
i.e. the backslash is interpreted as escape character. The path must
be quoted if it contains a colon, to avoid the colon from being
misinterpreted as the separator between the path and the contents, or
if the path begins or ends with a double-quote character.
+
The file mode is limited to a regular file, and the option may be
subject to platform-dependent command-line limits. For non-trivial
cases, write an untracked file and use `--add-file` instead.
--worktree-attributes::
Look for attributes in .gitattributes files in the working tree
as well (see <<ATTRIBUTES>>).
--mtime=<time>::
Set modification time of archive entries. Without this option
the committer time is used if `<tree-ish>` is a commit or tag,
and the current time if it is a tree.
<extra>::
This can be any options that the archiver backend understands.
See next section.
--remote=<repo>::
Instead of making a tar archive from the local repository,
retrieve a tar archive from a remote repository. Note that the
remote repository may place restrictions on which sha1
expressions may be allowed in `<tree-ish>`. See
linkgit:git-upload-archive[1] for details.
--exec=<git-upload-archive>::
Used with --remote to specify the path to the
'git-upload-archive' on the remote side.
<tree-ish>::
The tree or commit to produce an archive for.
<path>::
Without an optional path parameter, all files and subdirectories
of the current working directory are included in the archive.
If one or more paths are specified, only these are included.
BACKEND EXTRA OPTIONS
---------------------
zip
~~~
-<digit>::
Specify compression level. Larger values allow the command
to spend more time to compress to smaller size. Supported
values are from `-0` (store-only) to `-9` (best ratio).
Default is `-6` if not given.
tar
~~~
-<number>::
Specify compression level. The value will be passed to the
compression command configured in `tar.<format>.command`. See
manual page of the configured command for the list of supported
levels and the default level if this option isn't specified.
CONFIGURATION
-------------
tar.umask::
This variable can be used to restrict the permission bits of
tar archive entries. The default is 0002, which turns off the
world write bit. The special value "user" indicates that the
archiving user's umask will be used instead. See umask(2) for
details. If `--remote` is used then only the configuration of
the remote repository takes effect.
tar.<format>.command::
This variable specifies a shell command through which the tar
output generated by `git archive` should be piped. The command
is executed using the shell with the generated tar file on its
standard input, and should produce the final output on its
standard output. Any compression-level options will be passed
to the command (e.g., `-9`).
+
The `tar.gz` and `tgz` formats are defined automatically and use the
magic command `git archive gzip` by default, which invokes an internal
implementation of gzip.
tar.<format>.remote::
If true, enable the format for use by remote clients via
linkgit:git-upload-archive[1]. Defaults to false for
user-defined formats, but true for the `tar.gz` and `tgz`
formats.
[[ATTRIBUTES]]
ATTRIBUTES
----------
export-ignore::
Files and directories with the attribute export-ignore won't be
added to archive files. See linkgit:gitattributes[5] for details.
export-subst::
If the attribute export-subst is set for a file then Git will
expand several placeholders when adding this file to an archive.
See linkgit:gitattributes[5] for details.
Note that attributes are by default taken from the `.gitattributes` files
in the tree that is being archived. If you want to tweak the way the
output is generated after the fact (e.g. you committed without adding an
appropriate export-ignore in its `.gitattributes`), adjust the checked out
`.gitattributes` file as necessary and use `--worktree-attributes`
option. Alternatively you can keep necessary attributes that should apply
while archiving any tree in your `$GIT_DIR/info/attributes` file.
EXAMPLES
--------
`git archive --format=tar --prefix=junk/ HEAD | (cd /var/tmp/ && tar xf -)`::
Create a tar archive that contains the contents of the
latest commit on the current branch, and extract it in the
`/var/tmp/junk` directory.
`git archive --format=tar --prefix=git-1.4.0/ v1.4.0 | gzip >git-1.4.0.tar.gz`::
Create a compressed tarball for v1.4.0 release.
`git archive --format=tar.gz --prefix=git-1.4.0/ v1.4.0 >git-1.4.0.tar.gz`::
Same as above, but using the builtin tar.gz handling.
`git archive --prefix=git-1.4.0/ -o git-1.4.0.tar.gz v1.4.0`::
Same as above, but the format is inferred from the output file.
`git archive --format=tar --prefix=git-1.4.0/ v1.4.0^{tree} | gzip >git-1.4.0.tar.gz`::
Create a compressed tarball for v1.4.0 release, but without a
global extended pax header.
`git archive --format=zip --prefix=git-docs/ HEAD:Documentation/ > git-1.4.0-docs.zip`::
Put everything in the current head's Documentation/ directory
into 'git-1.4.0-docs.zip', with the prefix 'git-docs/'.
`git archive -o latest.zip HEAD`::
Create a Zip archive that contains the contents of the latest
commit on the current branch. Note that the output format is
inferred by the extension of the output file.
`git archive -o latest.tar --prefix=build/ --add-file=configure --prefix= HEAD`::
Creates a tar archive that contains the contents of the latest
commit on the current branch with no prefix and the untracked
file 'configure' with the prefix 'build/'.
`git config tar.tar.xz.command "xz -c"`::
Configure a "tar.xz" format for making LZMA-compressed tarfiles.
You can use it specifying `--format=tar.xz`, or by creating an
output file like `-o foo.tar.xz`.
SEE ALSO
--------
linkgit:gitattributes[5]
GIT
---
Part of the linkgit:git[1] suite
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...