0e698df | Linus Torvalds | 03 May 2020, 21:56:04 UTC | Linux 5.7-rc4 | 03 May 2020, 21:56:04 UTC |
262f7a6 | Linus Torvalds | 03 May 2020, 18:30:08 UTC | Merge tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull more btrfs fixes from David Sterba: "A few more stability fixes, minor build warning fixes and git url fixup: - fix partial loss of prealloc extent past i_size after fsync - fix potential deadlock due to wrong transaction handle passing via journal_info - fix gcc 4.8 struct intialization warning - update git URL in MAINTAINERS entry" * tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: MAINTAINERS: btrfs: fix git repo URL btrfs: fix gcc-4.8 build warning for struct initializer btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info btrfs: fix partial loss of prealloc extent past i_size after fsync | 03 May 2020, 18:30:08 UTC |
ea91593 | Linus Torvalds | 03 May 2020, 18:04:57 UTC | Merge tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - Fix a memory leak when dev_iommu gets freed and a sub-pointer does not - Build dependency fixes for Mediatek, spapr_tce, and Intel IOMMU driver - Export iommu_group_get_for_dev() only for GPLed modules - Fix AMD IOMMU interrupt remapping when x2apic is enabled - Fix error path in the QCOM IOMMU driver probe function * tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/qcom: Fix local_base status check iommu: Properly export iommu_group_get_for_dev() iommu/vt-d: Use right Kconfig option name iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config iommu/mediatek: Fix MTK_IOMMU dependencies iommu: Fix the memory leak in dev_iommu_free() | 03 May 2020, 18:04:57 UTC |
eb91db6 | Eric Biggers | 01 May 2020, 23:44:17 UTC | MAINTAINERS: btrfs: fix git repo URL The git repo listed for btrfs hasn't been updated in over a year. List the current one instead. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> | 03 May 2020, 16:13:18 UTC |
743f057 | Linus Torvalds | 02 May 2020, 20:45:30 UTC | Merge tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: - prevent the intel_pstate driver from printing excessive diagnostic messages in some cases (Chris Wilson) - make the hibernation restore kernel freeze kernel threads as well as user space tasks (Dexuan Cui) - fix the ACPI device PM disagnostic messages to include the correct power state name (Kai-Heng Feng). * tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: ACPI: Output correct message on target power state PM: hibernate: Freeze kernel threads in software_resume() cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once | 02 May 2020, 20:45:30 UTC |
a538399 | Rafael J. Wysocki | 02 May 2020, 19:39:17 UTC | Merge branches 'pm-cpufreq' and 'pm-sleep' * pm-cpufreq: cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once * pm-sleep: PM: hibernate: Freeze kernel threads in software_resume() | 02 May 2020, 19:39:17 UTC |
f66ed1e | Linus Torvalds | 02 May 2020, 18:31:12 UTC | Merge tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull iomap fix from Darrick Wong: "Hoist the check for an unrepresentable FIBMAP return value into ioctl_fibmap. The internal kernel function can handle 64-bit values (and is needed to fix a regression on ext4 + jbd2). It is only the userspace ioctl that is so old that it cannot deal" * tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: fibmap: Warn and return an error in case of block > INT_MAX | 02 May 2020, 18:31:12 UTC |
29a47f4 | Linus Torvalds | 02 May 2020, 18:24:01 UTC | Merge tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - fix handling of backchannel binding in BIND_CONN_TO_SESSION Bugfixes: - Fix a credential use-after-free issue in pnfs_roc() - Fix potential posix_acl refcnt leak in nfs3_set_acl - defer slow parts of rpc_free_client() to a workqueue - Fix an Oopsable race in __nfs_list_for_each_server() - Fix trace point use-after-free race - Regression: the RDMA client no longer responds to server disconnect requests - Fix return values of xdr_stream_encode_item_{present, absent} - _pnfs_return_layout() must always wait for layoutreturn completion Cleanups: - Remove unreachable error conditions" * tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix a race in __nfs_list_for_each_server() NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION SUNRPC: defer slow parts of rpc_free_client() to a workqueue. NFSv4: Remove unreachable error condition due to rpc_run_task() SUNRPC: Remove unreachable error condition xprtrdma: Fix use of xdr_stream_encode_item_{present, absent} xprtrdma: Fix trace point use-after-free race xprtrdma: Restore wake-up-all to rpcrdma_cm_event_handler() nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl NFS/pnfs: Fix a credential use-after-free issue in pnfs_roc() NFS/pnfs: Ensure that _pnfs_return_layout() waits for layoutreturn completion | 02 May 2020, 18:24:01 UTC |
ed6889d | Linus Torvalds | 02 May 2020, 18:16:14 UTC | Merge tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "Core: - Documentation typo fixes - fix the channel indexes - dmatest: fixes for process hang and iterations Drivers: - hisilicon: build error fix without PCI_MSI - ti-k3: deadlock fix - uniphier-xdmac: fix for reg region - pch: fix data race - tegra: fix clock state" * tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dmatest: Fix process hang when reading 'wait' parameter dmaengine: dmatest: Fix iteration non-stop logic dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization dmaengine: fix channel index enumeration dmaengine: mmp_tdma: Reset channel error on release dmaengine: mmp_tdma: Do not ignore slave config validation errors dmaengine: pch_dma.c: Avoid data race between probe and irq handler dt-bindings: dma: uniphier-xdmac: switch to single reg region include/linux/dmaengine: Typos fixes in API documentation dmaengine: xilinx_dma: Add missing check for empty list dmaengine: ti: k3-psil: fix deadlock on error path dmaengine: hisilicon: Fix build error without PCI_MSI | 02 May 2020, 18:16:14 UTC |
690e2ab | Linus Torvalds | 02 May 2020, 00:19:15 UTC | Merge tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio Pull VFIO fixes from Alex Williamson: - copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao) - Fix a potential math overflow (Yan Zhao) - Use follow_pfn() for calculating PFNMAPs (Sean Christopherson) * tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio: vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn() vfio: avoid possible overflow in vfio_iommu_type1_pin_pages vfio: checking of validity of user vaddr in vfio_dma_rw | 02 May 2020, 00:19:15 UTC |
42eb62d | Linus Torvalds | 02 May 2020, 00:09:31 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Add -fasynchronous-unwind-tables to the vDSO CFLAGS" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: vdso: Add -fasynchronous-unwind-tables to cflags | 02 May 2020, 00:09:31 UTC |
cf01853 | Linus Torvalds | 02 May 2020, 00:03:06 UTC | Merge tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: - Fix for statx not grabbing the file table, making AT_EMPTY_PATH fail - Cover a few cases where async poll can handle retry, eliminating the need for an async thread - fallback request busy/free fix (Bijan) - syzbot reported SQPOLL thread exit fix for non-preempt (Xiaoguang) - Fix extra put of req for sync_file_range (Pavel) - Always punt splice async. We'll improve this for 5.8, but wanted to eliminate the inode mutex lock from the non-blocking path for 5.7 (Pavel) * tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block: io_uring: punt splice async because of inode mutex io_uring: check non-sync defer_list carefully io_uring: fix extra put in sync_file_range() io_uring: use cond_resched() in io_ring_ctx_wait_and_kill() io_uring: use proper references for fallback_req locking io_uring: only force async punt if poll based retry can't handle it io_uring: enable poll retry for any file with ->read_iter / ->write_iter io_uring: statx must grab the file table for valid fd | 02 May 2020, 00:03:06 UTC |
052c467 | Linus Torvalds | 01 May 2020, 18:13:36 UTC | Merge tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "A few fixes for this release: - NVMe pull request from Christoph, with a single fix for a double free in the namespace error handling. - Kill the bd_openers check in blk_drop_partitions(), fixing a regression in this merge window (Christoph)" * tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block: block: remove the bd_openers checks in blk_drop_partitions nvme: prevent double free in nvme_alloc_ns() error handling | 01 May 2020, 18:13:36 UTC |
ab386c4 | Linus Torvalds | 01 May 2020, 18:10:09 UTC | Merge branch 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Three driver bugfixes, and two reverts because the original patches revealed underlying problems which the Tegra guys are now working on" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: aspeed: Avoid i2c interrupt status clear race condition. i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time" Revert "i2c: tegra: Synchronize DMA before termination" i2c: iproc: generate stop event for slave writes | 01 May 2020, 18:10:09 UTC |
c536419 | Linus Torvalds | 01 May 2020, 18:05:28 UTC | Merge tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a collection of small fixes around this time: - One more try for fixing PCM OSS regression - HD-audio: a new quirk for Lenovo, the improved driver blacklisting, a lock fix in the minor error path, and a fix for the possible race at monitor notifiaction - USB-audio: a quirk ID fix, a fix for POD HD500 workaround" * tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID ALSA: opti9xx: shut up gcc-10 range warning ALSA: hda/hdmi: fix without unlocked before return ALSA: hda/hdmi: fix race in monitor detection during probe ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter ALSA: line6: Fix POD HD500 audio playback ALSA: pcm: oss: Place the plugin buffer overflow checks correctly (for 5.7) ALSA: pcm: oss: Place the plugin buffer overflow checks correctly ALSA: hda: Match both PCI ID and SSID for driver blacklist | 01 May 2020, 18:05:28 UTC |
477bfeb | Linus Torvalds | 01 May 2020, 18:01:51 UTC | Merge tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Regular scheduled fixes for graphics. Nothing to extreme bunch of amdgpu fixes, i915 and qxl fixes, along with some misc ones. All seems to be progressing normally. core: - EDID off by one DTD fix - DP mst write return code fix dma-buf: - fix SET_NAME ioctl uapi - doc fixes amdgpu: - Fix a green screen on resume issue - PM fixes for SR-IOV SDMA fix for navi - Renoir display fixes - Cursor and pageflip stuttering fixes - Misc additional display fixes - (uapi) Add additional DCC tiling flags for navi1x i915: - Fix selftest refcnt leak (Xiyu) - Fix gem vma lock (Chris) - Fix gt's i915_request.timeline acquire by checking if cacheline is valid (Chris) - Fix IRQ postinistall fault masks (Matt) qxl: - use after gree fix - fix lost kunmap - release leak fix virtio: - context destruction fix" * tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits) dma-buf: fix documentation build warnings drm/qxl: qxl_release use after free drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper() drm/i915: Use proper fault mask in interrupt postinstall too drm/amd/display: Use cursor locking to prevent flip delays drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1 drm/amd/display: Defer cursor update around VUPDATE for all ASIC drm/amd/display: fix rn soc bb update drm/amd/display: check if REFCLK_CNTL register is present drm/amdgpu: bump version for invalidate L2 before SDMA IBs drm/amdgpu: invalidate L2 before SDMA IBs (v2) drm/amdgpu: add tiling flags from Mesa drm/amd/powerplay: avoid using pm_en before it is initialized revised Revert "drm/amd/powerplay: avoid using pm_en before it is initialized" drm/qxl: qxl_release leak in qxl_hw_surface_alloc() drm/qxl: qxl_release leak in qxl_draw_dirty_fb() drm/virtio: only destroy created contexts drm/dp_mst: Fix drm_dp_send_dpcd_write() return code drm/i915/gt: Check cacheline is valid before acquiring drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma() ... | 01 May 2020, 18:01:51 UTC |
cebcff3 | Linus Torvalds | 01 May 2020, 18:00:07 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four minor fixes: three in drivers and one in the core. The core one allows an additional state change that fixes a regression introduced by an update to the aacraid driver in the previous merge window" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target/iblock: fix WRITE SAME zeroing scsi: qla2xxx: check UNLOADING before posting async work scsi: qla2xxx: set UNLOADING before waiting for session deletion scsi: core: Allow the state change from SDEV_QUIESCE to SDEV_BLOCK | 01 May 2020, 18:00:07 UTC |
2fb3e82 | Pavel Begunkov | 01 May 2020, 14:09:38 UTC | io_uring: punt splice async because of inode mutex Nonblocking do_splice() still may wait for some time on an inode mutex. Let's play safe and always punt it async. Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 01 May 2020, 14:50:57 UTC |
4ee3631 | Pavel Begunkov | 01 May 2020, 14:09:37 UTC | io_uring: check non-sync defer_list carefully io_req_defer() do double-checked locking. Use proper helpers for that, i.e. list_empty_careful(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 01 May 2020, 14:50:30 UTC |
7759a0b | Pavel Begunkov | 01 May 2020, 14:09:36 UTC | io_uring: fix extra put in sync_file_range() [ 40.179474] refcount_t: underflow; use-after-free. [ 40.179499] WARNING: CPU: 6 PID: 1848 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0 ... [ 40.179612] RIP: 0010:refcount_warn_saturate+0xae/0xf0 [ 40.179617] Code: 28 44 0a 01 01 e8 d7 01 c2 ff 0f 0b 5d c3 80 3d 15 44 0a 01 00 75 91 48 c7 c7 b8 f5 75 be c6 05 05 44 0a 01 01 e8 b7 01 c2 ff <0f> 0b 5d c3 80 3d f3 43 0a 01 00 0f 85 6d ff ff ff 48 c7 c7 10 f6 [ 40.179619] RSP: 0018:ffffb252423ebe18 EFLAGS: 00010286 [ 40.179623] RAX: 0000000000000000 RBX: ffff98d65e929400 RCX: 0000000000000000 [ 40.179625] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 00000000ffffffff [ 40.179627] RBP: ffffb252423ebe18 R08: 0000000000000001 R09: 000000000000055d [ 40.179629] R10: 0000000000000c8c R11: 0000000000000001 R12: 0000000000000000 [ 40.179631] R13: ffff98d68c434400 R14: ffff98d6a9cbaa20 R15: ffff98d6a609ccb8 [ 40.179634] FS: 0000000000000000(0000) GS:ffff98d6af580000(0000) knlGS:0000000000000000 [ 40.179636] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.179638] CR2: 00000000033e3194 CR3: 000000006480a003 CR4: 00000000003606e0 [ 40.179641] Call Trace: [ 40.179652] io_put_req+0x36/0x40 [ 40.179657] io_free_work+0x15/0x20 [ 40.179661] io_worker_handle_work+0x2f5/0x480 [ 40.179667] io_wqe_worker+0x2a9/0x360 [ 40.179674] ? _raw_spin_unlock_irqrestore+0x24/0x40 [ 40.179681] kthread+0x12c/0x170 [ 40.179685] ? io_worker_handle_work+0x480/0x480 [ 40.179690] ? kthread_park+0x90/0x90 [ 40.179695] ret_from_fork+0x35/0x40 [ 40.179702] ---[ end trace 85027405f00110aa ]--- Opcode handler must never put submission ref, but that's what io_sync_file_range_finish() do. use io_steal_work() there. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 01 May 2020, 14:50:30 UTC |
b52649a | Tang Bin | 18 April 2020, 13:47:03 UTC | iommu/qcom: Fix local_base status check The function qcom_iommu_device_probe() does not perform sufficient error checking after executing devm_ioremap_resource(), which can result in crashes if a critical error path is encountered. Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu") Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200418134703.1760-1-tangbin@cmss.chinamobile.com Signed-off-by: Joerg Roedel <jroedel@suse.de> | 01 May 2020, 11:37:23 UTC |
ae74c19 | Greg Kroah-Hartman | 30 April 2020, 12:01:20 UTC | iommu: Properly export iommu_group_get_for_dev() In commit a7ba5c3d008d ("drivers/iommu: Export core IOMMU API symbols to permit modular drivers") a bunch of iommu symbols were exported, all with _GPL markings except iommu_group_get_for_dev(). That export should also be _GPL like the others. Fixes: a7ba5c3d008d ("drivers/iommu: Export core IOMMU API symbols to permit modular drivers") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Will Deacon <will@kernel.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: John Garry <john.garry@huawei.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200430120120.2948448-1-gregkh@linuxfoundation.org Signed-off-by: Joerg Roedel <jroedel@suse.de> | 01 May 2020, 11:32:34 UTC |
ba61c3d | Lu Baolu | 01 May 2020, 07:24:27 UTC | iommu/vt-d: Use right Kconfig option name The CONFIG_ prefix should be added in the code. Fixes: 046182525db61 ("iommu/vt-d: Add Kconfig option to enable/disable scalable mode") Reported-and-tested-by: Kumar, Sanjay K <sanjay.k.kumar@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/20200501072427.14265-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> | 01 May 2020, 11:31:17 UTC |
b74aa02 | Suravee Suthikulpanit | 22 April 2020, 13:30:02 UTC | iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system Currently, system fails to boot because the legacy interrupt remapping mode does not enable 128-bit IRTE (GA), which is required for x2APIC support. Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with kernel option amd_iommu_intr=legacy instead. The initialization logic will check GASup and automatically fallback to using AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported. Fixes: 3928aa3f5775 ("iommu/amd: Detect and enable guest vAPIC support") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de> | 01 May 2020, 11:21:18 UTC |
3fd44c8 | Xiaoguang Wang | 01 May 2020, 00:52:56 UTC | io_uring: use cond_resched() in io_ring_ctx_wait_and_kill() While working on to make io_uring sqpoll mode support syscalls that need struct files_struct, I got cpu soft lockup in io_ring_ctx_wait_and_kill(), while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait)) cpu_relax(); above loop never has an chance to exit, it's because preempt isn't enabled in the kernel, and the context calling io_ring_ctx_wait_and_kill() and io_sq_thread() run in the same cpu, if io_sq_thread calls a cond_resched() yield cpu and another context enters above loop, then io_sq_thread() will always in runqueue and never exit. Use cond_resched() can fix this issue. Reported-by: syzbot+66243bb7126c410cefe6@syzkaller.appspotmail.com Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 01 May 2020, 04:24:27 UTC |
dd461af | Bijan Mottahedeh | 30 April 2020, 00:47:50 UTC | io_uring: use proper references for fallback_req locking Use ctx->fallback_req address for test_and_set_bit_lock() and clear_bit_unlock(). Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 01 May 2020, 04:24:27 UTC |
490e896 | Jens Axboe | 28 April 2020, 19:16:53 UTC | io_uring: only force async punt if poll based retry can't handle it We do blocking retry from our poll handler, if the file supports polled notifications. Only mark the request as needing an async worker if we can't poll for it. Signed-off-by: Jens Axboe <axboe@kernel.dk> | 01 May 2020, 04:24:27 UTC |
af197f5 | Jens Axboe | 28 April 2020, 19:15:06 UTC | io_uring: enable poll retry for any file with ->read_iter / ->write_iter We can have files like eventfd where it's perfectly fine to do poll based retry on them, right now io_file_supports_async() doesn't take that into account. Pass in data direction and check the f_op instead of just always needing an async worker. Signed-off-by: Jens Axboe <axboe@kernel.dk> | 01 May 2020, 04:24:22 UTC |
e3dcd86 | Dave Airlie | 01 May 2020, 01:19:54 UTC | Merge tag 'amd-drm-fixes-5.7-2020-04-29' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.7-2020-04-29: amdgpu: - Fix a green screen on resume issue - PM fixes for SR-IOV - SDMA fix for navi - Renoir display fixes - Cursor and pageflip stuttering fixes - Misc additional display fixes UAPI: - Add additional DCC tiling flags for navi1x Used by: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4697 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429212008.4306-1-alexander.deucher@amd.com | 01 May 2020, 01:19:55 UTC |
a979bb7 | Dave Airlie | 01 May 2020, 00:56:13 UTC | Merge tag 'drm-intel-fixes-2020-04-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix selftest refcnt leak (Xiyu) - Fix gem vma lock (Chris) - Fix gt's i915_request.timeline acquire by checking if cacheline is valid (Chris) - Fix IRQ postinistall fault masks (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200430140042.GA270140@intel.com | 01 May 2020, 01:04:33 UTC |
c62098c | Dave Airlie | 01 May 2020, 00:41:59 UTC | Merge tag 'drm-misc-fixes-2020-04-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A few resources-related fixes for qxl, some doc build warnings and ioctl fixes for dma-buf, an off-by-one fix in edid, and a return code fix in DP-MST Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200430153201.wx6of2b2gsoip7bk@gilmour.lan | 01 May 2020, 00:42:09 UTC |
c45e8bc | Linus Torvalds | 30 April 2020, 23:45:08 UTC | Merge tag 'for-5.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Document DM integrity allow_discard feature that was added during 5.7 merge window. - Fix potential for DM writecache data corruption during DM table reloads. - Fix DM verity's FEC support's hash block number calculation in verity_fec_decode(). - Fix bio-based DM multipath crash due to use of stale copy of MPATHF_QUEUE_IO flag state in __map_bio(). * tag 'for-5.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm multipath: use updated MPATHF_QUEUE_IO on mapping for bio-based mpath dm verity fec: fix hash block number in verity_fec_decode dm writecache: fix data corruption when reloading the target dm integrity: document allow_discard option | 30 April 2020, 23:45:08 UTC |
39e16d9 | Linus Torvalds | 30 April 2020, 23:35:45 UTC | Merge tag 'selinux-pr-20200430' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux fixes from Paul Moore: "Two more SELinux patches to fix problems in the v5.7-rcX releases. Wei Yongjun's patch fixes a return code in an error path, and my patch fixes a problem where we were not correctly applying access controls to all of the netlink messages in the netlink_send LSM hook" * tag 'selinux-pr-20200430' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: properly handle multiple messages in selinux_netlink_send() selinux: fix error return code in cond_read_list() | 30 April 2020, 23:35:45 UTC |
0468915 | Linus Torvalds | 30 April 2020, 23:32:47 UTC | Merge tag 'linux-kselftest-kunit-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit fix from Shuah Khan: "A single fix to flush the test summary to the console log without delay" * tag 'linux-kselftest-kunit-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Add missing newline in summary message | 30 April 2020, 23:32:47 UTC |
75ec0ba | Linus Torvalds | 30 April 2020, 23:28:49 UTC | Merge tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - ftrace test fixes to check for required filter files and kprobe args. - Kselftest build/cross-build dependency check script to make it easier for test ring admins/users to configure build systems correctly for build/cross-build kselftests. Currently checks library dependencies. - Checks if Kselftests can be built/cross-built on a system running compile test on a trivial C file with LDLIBS specified for each individual test in their Makefiles. - Prints suggested target list for a system filtering out tests failed the build dependency check from the TARGETS in Selftests the main Makefile when optional -p is specified. - Prints pass/fail dependency check for each tests/sub-test. - Prints pass/fail targets and libraries. - Default: runs dependency checks on all tests. - Optional test name can be specified to check dependencies for it. * tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Check the first record for kprobe_args_type.tc selftests: add build/cross-build dependency check script selftests/ftrace: Check required filter files before running test | 30 April 2020, 23:28:49 UTC |
fb73974 | Paul Moore | 28 April 2020, 13:59:02 UTC | selinux: properly handle multiple messages in selinux_netlink_send() Fix the SELinux netlink_send hook to properly handle multiple netlink messages in a single sk_buff; each message is parsed and subject to SELinux access control. Prior to this patch, SELinux only inspected the first message in the sk_buff. Cc: stable@vger.kernel.org Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> | 30 April 2020, 20:18:37 UTC |
9c07b75 | Trond Myklebust | 30 April 2020, 19:08:26 UTC | NFS: Fix a race in __nfs_list_for_each_server() The struct nfs_server gets put on the cl_superblocks list before the server->super field has been initialised, in which case the call to nfs_sb_active() will Oops. Add a check to ensure that we skip such a list entry. Fixes: 3c9e502b59fb ("NFS: Add a helper nfs_client_for_each_server()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> | 30 April 2020, 19:08:26 UTC |
af4a32a | Linus Torvalds | 30 April 2020, 17:38:48 UTC | Merge tag 'mmc-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - meson-mx-sdio: Fix support for HW busy detection - sdhci-msm: Fix support for HW busy detection - cqhci: Fix polling loop by converting to readx_poll_timeout() - sdhci-xenon: Fix annoying 1.8V regulator warning - sdhci-pci: Fix eMMC driver strength for BYT-based controllers * tag 'mmc-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers mmc: sdhci-xenon: fix annoying 1.8V regulator warning mmc: sdhci-msm: Enable host capabilities pertains to R1b response mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop mmc: meson-mx-sdio: remove the broken ->card_busy() op mmc: meson-mx-sdio: Set MMC_CAP_WAIT_WHILE_BUSY mmc: core: make mmc_interrupt_hpi() static | 30 April 2020, 17:38:48 UTC |
1578e5d | Vincenzo Frascino | 29 April 2020, 15:10:50 UTC | arm64: vdso: Add -fasynchronous-unwind-tables to cflags On arm64 linux gcc uses -fasynchronous-unwind-tables -funwind-tables by default since gcc-8, so now the de facto platform ABI is to allow unwinding from async signal handlers. However on bare metal targets (aarch64-none-elf), and on old gcc, async and sync unwind tables are not enabled by default to avoid runtime memory costs. This means if linux is built with a baremetal toolchain the vdso.so may not have unwind tables which breaks the gcc platform ABI guarantee in userspace. Add -fasynchronous-unwind-tables explicitly to the vgettimeofday.o cflags to address the ABI change. Fixes: 28b1a824a4f4 ("arm64: vdso: Substitute gettimeofday() with C implementation") Cc: Will Deacon <will@kernel.org> Reported-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 30 April 2020, 17:35:32 UTC |
10c70d9 | Christoph Hellwig | 28 April 2020, 08:52:03 UTC | block: remove the bd_openers checks in blk_drop_partitions When replacing the bd_super check with a bd_openers I followed a logical conclusion, which turns out to be utterly wrong. When a block device has bd_super sets it has a mount file system on it (although not every mounted file system sets bd_super), but that also implies it doesn't even have partitions to start with. So instead of trying to come up with a logical check for all openers, just remove the check entirely. Fixes: d3ef5536274f ("block: fix busy device checking in blk_drop_partitions") Fixes: cb6b771b05c3 ("block: fix busy device checking in blk_drop_partitions again") Reported-by: Michal Koutný <mkoutny@suse.com> Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 30 April 2020, 16:25:43 UTC |
47ed39e | Jens Axboe | 30 April 2020, 15:32:48 UTC | Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7 Pull NVMe fix from Christoph. * 'nvme-5.7' of git://git.infradead.org/nvme: nvme: prevent double free in nvme_alloc_ns() error handling | 30 April 2020, 15:32:48 UTC |
b75dfde | Ritesh Harjani | 30 April 2020, 14:57:46 UTC | fibmap: Warn and return an error in case of block > INT_MAX We better warn the fibmap user and not return a truncated and therefore an incorrect block map address if the bmap() returned block address is greater than INT_MAX (since user supplied integer pointer). It's better to pr_warn() all user of ioctl_fibmap() and return a proper error code rather than silently letting a FS corruption happen if the user tries to fiddle around with the returned block map address. We fix this by returning an error code of -ERANGE and returning 0 as the block mapping address in case if it is > INT_MAX. Now iomap_bmap() could be called from either of these two paths. Either when a user is calling an ioctl_fibmap() interface to get the block mapping address or by some filesystem via use of bmap() internal kernel API. bmap() kernel API is well equipped with handling of u64 addresses. WARN condition in iomap_bmap_actor() was mainly added to warn all the fibmap users. But now that we have directly added this warning for all fibmap users and also made sure to return 0 as block map address in case if addr > INT_MAX. So we can now remove this logic from iomap_bmap_actor(). Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> | 30 April 2020, 14:57:46 UTC |
6f49c25 | Randy Dunlap | 08 April 2020, 04:20:34 UTC | dma-buf: fix documentation build warnings Fix documentation warnings in dma-buf.[hc]: ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach' ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach' ../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/7bcbe6fe-0b4b-87da-d003-b68a26eb4cf0@infradead.org | 30 April 2020, 14:17:39 UTC |
c926c87 | ryan_chen | 29 April 2020, 03:37:37 UTC | i2c: aspeed: Avoid i2c interrupt status clear race condition. In AST2600 there have a slow peripheral bus between CPU and i2c controller. Therefore GIC i2c interrupt status clear have delay timing, when CPU issue write clear i2c controller interrupt status. To avoid this issue, the driver need have read after write clear at i2c ISR. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [wsa: added Fixes tag] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 30 April 2020, 14:12:33 UTC |
ac2b081 | Dan Carpenter | 10 September 2019, 13:42:42 UTC | i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling The problem is that we dereference "privdata->pci_dev" when we print the error messages in amd_mp2_pci_init(): dev_err(ndev_dev(privdata), "Failed to enable MP2 PCI device\n"); ^^^^^^^^^^^^^^^^^ Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org | 30 April 2020, 14:11:41 UTC |
547d2c9 | Takashi Iwai | 30 April 2020, 12:47:55 UTC | ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0. Fixes: f656891c6619 ("ALSA: usb-audio: add more quirks for DSD interfaces") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200430124755.15940-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 30 April 2020, 12:50:18 UTC |
9c6c723 | Arnd Bergmann | 29 April 2020, 13:27:32 UTC | btrfs: fix gcc-4.8 build warning for struct initializer Some older compilers like gcc-4.8 warn about mismatched curly braces in a initializer: fs/btrfs/backref.c: In function 'is_shared_data_backref': fs/btrfs/backref.c:394:9: error: missing braces around initializer [-Werror=missing-braces] struct prelim_ref target = {0}; ^ fs/btrfs/backref.c:394:9: error: (near initialization for 'target.rbnode') [-Werror=missing-braces] Use the GNU empty initializer extension to avoid this. Fixes: ed58f2e66e84 ("btrfs: backref, don't add refs from shared block when resolving normal backref") Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> | 30 April 2020, 10:17:49 UTC |
5ce0076 | Arnd Bergmann | 29 April 2020, 19:02:03 UTC | ALSA: opti9xx: shut up gcc-10 range warning gcc-10 points out a few instances of suspicious integer arithmetic leading to value truncation: sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure': sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow] 322 | (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask' 351 | snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | ^~~~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/miro.c: In function 'snd_miro_configure': sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow] 873 | (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask' 1010 | snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | ^~~~~~~~~~~~~~~~~~~ These are all harmless here as only the low 8 bit are passed down anyway. Change the macros to inline functions to make the code more readable and also avoid the warning. Strictly speaking those functions also need locking to make the read/write pair atomic, but it seems unlikely that anyone would still run into that issue. Fixes: 1841f613fd2e ("[ALSA] Add snd-miro driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 30 April 2020, 06:11:42 UTC |
1d2cc5a | Linus Torvalds | 29 April 2020, 16:25:32 UTC | Merge tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes. Specifically: - fix linker argument to allow linking with lld - build fix for configurations without a frame pointer - a handful of build fixes related the SBI 0.1 vs 0.2 split - remove STRICT_KERNEL_RWX for !MMU, which isn't useful" * tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU riscv: sbi: Fix undefined reference to sbi_shutdown tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI riscv: sbi: Correct sbi_shutdown() and sbi_clear_ipi() export riscv: fix vdso build with lld RISC-V: stacktrace: Declare sp_in_global outside ifdef | 29 April 2020, 16:25:32 UTC |
6c3efdc | Linus Torvalds | 29 April 2020, 16:22:32 UTC | Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a bunch of bugs detected by KASAN in the caam driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix the address of the last entry of S/G crypto: caam - fix use-after-free KASAN issue for RSA algorithms crypto: caam - fix use-after-free KASAN issue for HASH algorithms crypto: caam - fix use-after-free KASAN issue for AEAD algorithms crypto: caam - fix use-after-free KASAN issue for SKCIPHER algorithms | 29 April 2020, 16:22:32 UTC |
9dd124b | Krzysztof Kozlowski | 14 April 2020, 14:26:30 UTC | iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config Although SPAPR_TCE_IOMMU itself can be compile tested on certain PowerPC configurations, its presence makes arch/powerpc/kvm/Makefile to select modules which do not build in such configuration. The arch/powerpc/kvm/ modules use kvm_arch.spapr_tce_tables which exists only with CONFIG_PPC_BOOK3S_64. However these modules are selected when COMPILE_TEST and SPAPR_TCE_IOMMU are chosen leading to build failures: In file included from arch/powerpc/include/asm/book3s/64/mmu-hash.h:20:0, from arch/powerpc/kvm/book3s_64_vio_hv.c:22: arch/powerpc/include/asm/book3s/64/pgtable.h:17:0: error: "_PAGE_EXEC" redefined [-Werror] #define _PAGE_EXEC 0x00001 /* execute permission */ In file included from arch/powerpc/include/asm/book3s/32/pgtable.h:8:0, from arch/powerpc/include/asm/book3s/pgtable.h:8, from arch/powerpc/include/asm/pgtable.h:18, from include/linux/mm.h:95, from arch/powerpc/include/asm/io.h:29, from include/linux/io.h:13, from include/linux/irq.h:20, from arch/powerpc/include/asm/hardirq.h:6, from include/linux/hardirq.h:9, from include/linux/kvm_host.h:7, from arch/powerpc/kvm/book3s_64_vio_hv.c:12: arch/powerpc/include/asm/book3s/32/hash.h:29:0: note: this is the location of the previous definition #define _PAGE_EXEC 0x200 /* software: exec allowed */ Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200414142630.21153-1-krzk@kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de> | 29 April 2020, 11:55:40 UTC |
d1dcb72 | Geert Uytterhoeven | 10 April 2020, 14:30:47 UTC | iommu/mediatek: Fix MTK_IOMMU dependencies If NO_DMA=y (e.g. Sun-3 all{mod,yes}-config): drivers/iommu/dma-iommu.o: In function `iommu_dma_mmap': dma-iommu.c:(.text+0x836): undefined reference to `dma_pgprot' IOMMU_DMA must not be selected, unless HAS_DMA=y. Hence fix this by making MTK_IOMMU depend on HAS_DMA. While at it, remove the dependency on ARM || ARM64, as that is already implied by the dependency on ARCH_MEDIATEK. Fixes: e93a1695d7fb5513 ("iommu: Enable compile testing for some of drivers") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200410143047.19691-1-geert@linux-m68k.org Signed-off-by: Joerg Roedel <jroedel@suse.de> | 29 April 2020, 11:55:40 UTC |
5375e87 | Kevin Hao | 02 April 2020, 14:37:49 UTC | iommu: Fix the memory leak in dev_iommu_free() In iommu_probe_device(), we would invoke dev_iommu_free() to free the dev->iommu after the ->add_device() returns failure. But after commit 72acd9df18f1 ("iommu: Move iommu_fwspec to struct dev_iommu"), we also need to free the iommu_fwspec before the dev->iommu is freed. This fixes the following memory leak reported by kmemleak: unreferenced object 0xffff000bc836c700 (size 128): comm "swapper/0", pid 1, jiffies 4294896304 (age 782.120s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 d8 cd 9b ff 0b 00 ff ff ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000df34077b>] kmem_cache_alloc_trace+0x244/0x4b0 [<000000000e560ac0>] iommu_fwspec_init+0x7c/0xb0 [<0000000075eda275>] of_iommu_xlate+0x80/0xe8 [<00000000728d6bf9>] of_pci_iommu_init+0xb0/0xb8 [<00000000d001fe6f>] pci_for_each_dma_alias+0x48/0x190 [<000000006db6bbce>] of_iommu_configure+0x1ac/0x1d0 [<00000000634745f8>] of_dma_configure+0xdc/0x220 [<000000002cbc8ba0>] pci_dma_configure+0x50/0x78 [<00000000cdf6e193>] really_probe+0x8c/0x340 [<00000000fddddc46>] driver_probe_device+0x60/0xf8 [<0000000061bcdb51>] __device_attach_driver+0x8c/0xd0 [<000000009b9ff58e>] bus_for_each_drv+0x80/0xd0 [<000000004b9c8aa3>] __device_attach+0xec/0x148 [<00000000a5c13bf3>] device_attach+0x1c/0x28 [<000000005071e151>] pci_bus_add_device+0x58/0xd0 [<000000002d4f87d1>] pci_bus_add_devices+0x40/0x90 Fixes: 72acd9df18f1 ("iommu: Move iommu_fwspec to struct dev_iommu") Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://lore.kernel.org/r/20200402143749.40500-1-haokexin@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de> | 29 April 2020, 11:55:40 UTC |
933db73 | Vasily Averin | 29 April 2020, 09:01:24 UTC | drm/qxl: qxl_release use after free qxl_release should not be accesses after qxl_push_*_ring_release() calls: userspace driver can process submitted command quickly, move qxl_release into release_ring, generate interrupt and trigger garbage collector. It can lead to crashes in qxl driver or trigger memory corruption in some kmalloc-192 slab object Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() + qxl_push_{cursor,command}_ring_release() calls to close that race window. cc: stable@vger.kernel.org Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Link: http://patchwork.freedesktop.org/patch/msgid/fa17b338-66ae-f299-68fe-8d32419d9071@virtuozzo.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 29 April 2020, 11:21:34 UTC |
5b5703d | Vasily Averin | 29 April 2020, 09:34:36 UTC | drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper() v2: removed TODO reminder Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Link: http://patchwork.freedesktop.org/patch/msgid/a4e0ae09-a73c-1c62-04ef-3f990d41bea9@virtuozzo.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 29 April 2020, 11:21:34 UTC |
a2f6472 | Wu Bo | 26 April 2020, 13:17:22 UTC | ALSA: hda/hdmi: fix without unlocked before return Fix the following coccicheck warning: sound/pci/hda/patch_hdmi.c:1852:2-8: preceding lock on line 1846 After add sanity check to pass klockwork check, The spdif_mutex should be unlock before return true in check_non_pcm_per_cvt(). Fixes: 960a581e22d9 ("ALSA: hda: fix some klockwork scan warnings") Signed-off-by: Wu Bo <wubo40@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1587907042-694161-1-git-send-email-wubo40@huawei.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 April 2020, 07:25:37 UTC |
5686dee | Gabriel Krisman Bertazi | 28 April 2020, 00:39:11 UTC | dm multipath: use updated MPATHF_QUEUE_IO on mapping for bio-based mpath When adding devices that don't have a scsi_dh on a BIO based multipath, I was able to consistently hit the warning below and lock-up the system. The problem is that __map_bio reads the flag before it potentially being modified by choose_pgpath, and ends up using the older value. The WARN_ON below is not trivially linked to the issue. It goes like this: The activate_path delayed_work is not initialized for non-scsi_dh devices, but we always set MPATHF_QUEUE_IO, asking for initialization. That is fine, since MPATHF_QUEUE_IO would be cleared in choose_pgpath. Nevertheless, only for BIO-based mpath, we cache the flag before calling choose_pgpath, and use the older version when deciding if we should initialize the path. Therefore, we end up trying to initialize the paths, and calling the non-initialized activate_path work. [ 82.437100] ------------[ cut here ]------------ [ 82.437659] WARNING: CPU: 3 PID: 602 at kernel/workqueue.c:1624 __queue_delayed_work+0x71/0x90 [ 82.438436] Modules linked in: [ 82.438911] CPU: 3 PID: 602 Comm: systemd-udevd Not tainted 5.6.0-rc6+ #339 [ 82.439680] RIP: 0010:__queue_delayed_work+0x71/0x90 [ 82.440287] Code: c1 48 89 4a 50 81 ff 00 02 00 00 75 2a 4c 89 cf e9 94 d6 07 00 e9 7f e9 ff ff 0f 0b eb c7 0f 0b 48 81 7a 58 40 74 a8 94 74 a7 <0f> 0b 48 83 7a 48 00 74 a5 0f 0b eb a1 89 fe 4c 89 cf e9 c8 c4 07 [ 82.441719] RSP: 0018:ffffb738803977c0 EFLAGS: 00010007 [ 82.442121] RAX: ffffa086389f9740 RBX: 0000000000000002 RCX: 0000000000000000 [ 82.442718] RDX: ffffa086350dd930 RSI: ffffa0863d76f600 RDI: 0000000000000200 [ 82.443484] RBP: 0000000000000200 R08: 0000000000000000 R09: ffffa086350dd970 [ 82.444128] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa086350dd930 [ 82.444773] R13: ffffa0863d76f600 R14: 0000000000000000 R15: ffffa08636738008 [ 82.445427] FS: 00007f6abfe9dd40(0000) GS:ffffa0863dd80000(0000) knlGS:00000 [ 82.446040] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 82.446478] CR2: 0000557d288db4e8 CR3: 0000000078b36000 CR4: 00000000000006e0 [ 82.447104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 82.447561] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 82.448012] Call Trace: [ 82.448164] queue_delayed_work_on+0x6d/0x80 [ 82.448472] __pg_init_all_paths+0x7b/0xf0 [ 82.448714] pg_init_all_paths+0x26/0x40 [ 82.448980] __multipath_map_bio.isra.0+0x84/0x210 [ 82.449267] __map_bio+0x3c/0x1f0 [ 82.449468] __split_and_process_non_flush+0x14a/0x1b0 [ 82.449775] __split_and_process_bio+0xde/0x340 [ 82.450045] ? dm_get_live_table+0x5/0xb0 [ 82.450278] dm_process_bio+0x98/0x290 [ 82.450518] dm_make_request+0x54/0x120 [ 82.450778] generic_make_request+0xd2/0x3e0 [ 82.451038] ? submit_bio+0x3c/0x150 [ 82.451278] submit_bio+0x3c/0x150 [ 82.451492] mpage_readpages+0x129/0x160 [ 82.451756] ? bdev_evict_inode+0x1d0/0x1d0 [ 82.452033] read_pages+0x72/0x170 [ 82.452260] __do_page_cache_readahead+0x1ba/0x1d0 [ 82.452624] force_page_cache_readahead+0x96/0x110 [ 82.452903] generic_file_read_iter+0x84f/0xae0 [ 82.453192] ? __seccomp_filter+0x7c/0x670 [ 82.453547] new_sync_read+0x10e/0x190 [ 82.453883] vfs_read+0x9d/0x150 [ 82.454172] ksys_read+0x65/0xe0 [ 82.454466] do_syscall_64+0x4e/0x210 [ 82.454828] entry_SYSCALL_64_after_hwframe+0x49/0xbe [...] [ 82.462501] ---[ end trace bb39975e9cf45daa ]--- Cc: stable@vger.kernel.org Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 28 April 2020, 23:51:46 UTC |
8598eb7 | Matt Roper | 24 April 2020, 23:14:23 UTC | drm/i915: Use proper fault mask in interrupt postinstall too The IRQ postinstall handling had open-coded pipe fault mask selection that never got updated for gen11. Switch it to use gen8_de_pipe_fault_mask() to ensure we don't miss updates for new platforms. Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: d506a65d56fd ("drm/i915: Catch GTT fault errors for gen11+ planes") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200424231423.4065231-1-matthew.d.roper@intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 869129ee0c624a78c74e50b51635e183196cd2c6) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> | 28 April 2020, 23:38:03 UTC |
96c9a78 | Linus Torvalds | 28 April 2020, 21:38:39 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Two old bugs..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: propagate_one(): mnt_set_mountpoint() needs mount_lock dlmfs_file_write(): fix the bogosity in handling non-zero *ppos | 28 April 2020, 21:38:39 UTC |
dd7bc81 | David Howells | 28 April 2020, 20:27:48 UTC | Fix use after free in get_tree_bdev() Commit 6fcf0c72e4b9, a fix to get_tree_bdev() put a missing blkdev_put() in the wrong place, before a warnf() that displays the bdev under consideration rather after it. This results in a silent lockup in printk("%pg") called via warnf() from get_tree_bdev() under some circumstances when there's a race with the blockdev being frozen. This can be caused by xfstests/tests/generic/085 in combination with Lukas Czerner's ext4 mount API conversion patchset. It looks like it ought to occur with other users of get_tree_bdev() such as XFS, but apparently doesn't. Fix this by switching the order of the lines. Fixes: 6fcf0c72e4b9 ("vfs: add missing blkdev_put() in get_tree_bdev()") Reported-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Ian Kent <raven@themaw.net> cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 April 2020, 21:37:40 UTC |
b2a7b0c | Aric Cyr | 22 April 2020, 22:08:03 UTC | drm/amd/display: Use cursor locking to prevent flip delays [Why] Current locking scheme for cursor can result in a flip missing its vsync, deferring it for one or more vsyncs. Result is a potential for stuttering when cursor is moved. [How] Use cursor update lock so that flips are not blocked while cursor is being programmed. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 28 April 2020, 20:45:14 UTC |
668a674 | Sung Lee | 22 April 2020, 22:07:57 UTC | drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1 [WHY] The downspread percentage was copied over from a previous version of the display_mode_lib spreadsheet. This value has been updated, and the previous value is too high to allow for such modes as 4K120hz. The new value is sufficient for such modes. [HOW] Update the value in dcn21_resource to match the spreadsheet. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 28 April 2020, 20:44:36 UTC |
fdfd2a8 | Nicholas Kazlauskas | 22 April 2020, 22:07:56 UTC | drm/amd/display: Defer cursor update around VUPDATE for all ASIC [Why] Fixes the following scenario: - Flip has been prepared sometime during the frame, update pending - Cursor update happens right when VUPDATE would happen - OPTC lock acquired, VUPDATE is blocked until next frame - Flip is delayed potentially infinitely With the igt@kms_cursor_legacy cursor-vs-flip-legacy test we can observe nearly *13* frames of delay for some flips on Navi. [How] Apply the Raven workaround generically. When close enough to VUPDATE block cursor updates from occurring from the dc_stream_set_cursor_* helpers. This could perhaps be a little smarter by checking if there were pending updates or flips earlier in the frame on the HUBP side before applying the delay, but this should be fine for now. This fixes the kms_cursor_legacy test. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 28 April 2020, 20:44:13 UTC |
6eb3f7d | Dmytro Laktyushkin | 22 April 2020, 22:07:53 UTC | drm/amd/display: fix rn soc bb update Currently RN SOC bounding box update assumes we will get at least 2 clock states from SMU. This isn't always true and because of special casing on first clock state we end up with low disp, dpp, dsc and phy clocks. This change removes the special casing allowing the first state to acquire correct clocks. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 28 April 2020, 20:43:13 UTC |
3159d41 | Dmytro Laktyushkin | 22 April 2020, 22:07:52 UTC | drm/amd/display: check if REFCLK_CNTL register is present Check before programming the register since it isn't present on all IPs using this code. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 28 April 2020, 20:42:45 UTC |
edb98d1 | Linus Torvalds | 28 April 2020, 20:18:07 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "A couple of regressions were found in rc1, as well as another set of races and bugs: - A regression where RDMA_CM_EVENT_REJECTED was lost in some cases - Bad error handling in the CM, uverbs, rvt, siw and i40iw - Kernel stack memory leak to user space in mlx4 - Missing data in a uapi query for mlx5 - Three races found by syzkaller in the ib core code" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/core: Fix race between destroy and release FD object IB/rdmavt: Always return ERR_PTR from rvt_create_mmap_info() RDMA/core: Fix overwriting of uobj in case of error RDMA/core: Prevent mixed use of FDs between shared ufiles RDMA/uverbs: Fix a race with disassociate and exit_mmap() RDMA/mlx5: Set GRH fields in query QP on RoCE RDMA/siw: Fix potential siw_mem refcnt leak in siw_fastreg_mr() RDMA/mlx4: Initialize ib_spec on the stack RDMA/cm: Fix an error check in cm_alloc_id_priv() RDMA/cm: Fix missing RDMA_CM_EVENT_REJECTED event after receiving REJ message i40iw: fix null pointer dereference on a null wqe pointer | 28 April 2020, 20:18:07 UTC |
8e2912c | Trond Myklebust | 28 April 2020, 19:59:03 UTC | Merge tag 'nfs-rdma-for-5.7-2' of git://git.linux-nfs.org/projects/anna/linux-nfs NFSoRDMA Client Fixes for Linux 5.7 Bugfixes: - Restore wake-up-all to rpcrdma_cm_event_handler() - Otherwise the client won't respond to server disconnect requests - Fix tracepoint use-after-free race - Fix usage of xdr_stream_encode_item_{present, absent} - These functions return a size on success, and not 0 Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> | 28 April 2020, 19:59:03 UTC |
dff5853 | Olga Kornievskaia | 24 April 2020, 21:45:50 UTC | NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION Currently, if the client sends BIND_CONN_TO_SESSION with NFS4_CDFC4_FORE_OR_BOTH but only gets NFS4_CDFS4_FORE back it ignores that it wasn't able to enable a backchannel. To make sure, the client sends BIND_CONN_TO_SESSION as the first operation on the connections (ie., no other session compounds haven't been sent before), and if the client's request to bind the backchannel is not satisfied, then reset the connection and retry. Cc: stable@vger.kernel.org Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> | 28 April 2020, 19:58:38 UTC |
7c4310f | NeilBrown | 03 April 2020, 03:33:41 UTC | SUNRPC: defer slow parts of rpc_free_client() to a workqueue. The rpciod workqueue is on the write-out path for freeing dirty memory, so it is important that it never block waiting for memory to be allocated - this can lead to a deadlock. rpc_execute() - which is often called by an rpciod work item - calls rcp_task_release_client() which can lead to rpc_free_client(). rpc_free_client() makes two calls which could potentially block wating for memory allocation. rpc_clnt_debugfs_unregister() calls into debugfs and will block while any of the debugfs files are being accessed. In particular it can block while any of the 'open' methods are being called and all of these use malloc for one thing or another. So this can deadlock if the memory allocation waits for NFS to complete some writes via rpciod. rpc_clnt_remove_pipedir() can take the inode_lock() and while it isn't obvious that memory allocations can happen while the lock it held, it is safer to assume they might and to not let rpciod call rpc_clnt_remove_pipedir(). So this patch moves these two calls (together with the final kfree() and rpciod_down()) into a work-item to be run from the system work-queue. rpciod can continue its important work, and the final stages of the free can happen whenever they happen. I have seen this deadlock on a 4.12 based kernel where debugfs used synchronize_srcu() when removing objects. synchronize_srcu() requires a workqueue and there were no free workther threads and none could be allocated. While debugsfs no longer uses SRCU, I believe the deadlock is still possible. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> | 28 April 2020, 19:58:38 UTC |
9017a48 | Marek Olšák | 27 April 2020, 20:25:39 UTC | drm/amdgpu: bump version for invalidate L2 before SDMA IBs This fixes GPU hangs due to cache coherency issues. Bump the driver version. Split out from the original patch. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 28 April 2020, 19:58:31 UTC |
fdf8364 | Marek Olšák | 27 April 2020, 19:59:22 UTC | drm/amdgpu: invalidate L2 before SDMA IBs (v2) This fixes GPU hangs due to cache coherency issues. v2: Split the version bump to a separate patch Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org | 28 April 2020, 19:58:12 UTC |
c938628 | Marek Olšák | 18 April 2020, 00:50:30 UTC | drm/amdgpu: add tiling flags from Mesa DCC_INDEPENDENT_128B is needed for displayble DCC on gfx10. SCANOUT is not needed by the kernel, but Mesa uses it. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 28 April 2020, 19:29:27 UTC |
690ae30 | Tiecheng Zhou | 26 April 2020, 11:03:17 UTC | drm/amd/powerplay: avoid using pm_en before it is initialized revised hwmgr->pm_en is initialized at hwmgr_hw_init. during amdgpu_device_init, there is amdgpu_asic_reset that calls to soc15_asic_reset (for V320 usecase, Vega10 asic), in which: 1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en) 2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en) pm_en is used in the above two cases while it has not yet been initialized So avoid using pm_en in the above two functions for V320 passthrough. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 28 April 2020, 19:29:08 UTC |
1e4a18c | Tiecheng Zhou | 27 April 2020, 01:44:38 UTC | Revert "drm/amd/powerplay: avoid using pm_en before it is initialized" This reverts commit c5207876232649ca5e5ddd6f966d2da75ffded8f. The commit being reverted changed the wrong place, it should have changed in func get_asic_baco_capability. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 28 April 2020, 19:28:24 UTC |
aa72f1d | Andy Shevchenko | 28 April 2020, 11:35:18 UTC | dmaengine: dmatest: Fix process hang when reading 'wait' parameter If we do % echo 1 > /sys/module/dmatest/parameters/run [ 115.851124] dmatest: Could not start test, no channels configured % echo dma8chan7 > /sys/module/dmatest/parameters/channel [ 127.563872] dmatest: Added 1 threads using dma8chan7 % cat /sys/module/dmatest/parameters/wait ... !!! HANG !!! ... The culprit is the commit 6138f967bccc ("dmaengine: dmatest: Use fixed point div to calculate iops") which makes threads not to run, but pending and being kicked off by writing to the 'run' node. However, it forgot to consider 'wait' routine to avoid above mentioned case. In order to fix this, check for really running threads, i.e. with pending and done flags unset. It's pity the culprit commit hadn't updated documentation and tested all possible scenarios. Fixes: 6138f967bccc ("dmaengine: dmatest: Use fixed point div to calculate iops") Cc: Seraj Alijan <seraj.alijan@sondrel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200428113518.70620-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> | 28 April 2020, 16:16:35 UTC |
3f777e1 | Linus Torvalds | 28 April 2020, 16:13:08 UTC | Merge tag 'cve-2020-11884' from emailed bundle Pull s390 fix from Christian Borntraeger: "Fix a race between page table upgrade and uaccess on s390. This fixes CVE-2020-11884 which allows for a local kernel crash or code execution" * tag 'cve-2020-11884' from emailed bundle: s390/mm: fix page table upgrade vs 2ndary address mode accesses | 28 April 2020, 16:13:08 UTC |
ca76282 | Kai Vehmanen | 28 April 2020, 12:38:36 UTC | ALSA: hda/hdmi: fix race in monitor detection during probe A race exists between build_pcms() and build_controls() phases of codec setup. Build_pcms() sets up notifier for jack events. If a monitor event is received before build_controls() is run, the initial jack state is lost and never reported via mixer controls. The problem can be hit at least with SOF as the controller driver. SOF calls snd_hda_codec_build_controls() in its workqueue-based probe and this can be delayed enough to hit the race condition. Fix the issue by invalidating the per-pin ELD information when build_controls() is called. The existing call to hdmi_present_sense() will update the ELD contents. This ensures initial monitor state is correctly reflected via mixer controls. BugLink: https://github.com/thesofproject/linux/issues/1687 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 28 April 2020, 14:04:45 UTC |
8839e46 | Wolfram Sang | 27 April 2020, 08:52:22 UTC | Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time" This reverts commit a900aeac253729411cf33c6cb598c152e9e4137f because regressions were showing up. Suggested-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/dmaengine/20200319201140.17451-1-digetx@gmail.com/ Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 28 April 2020, 11:31:17 UTC |
deb821f | Wolfram Sang | 27 April 2020, 08:48:22 UTC | Revert "i2c: tegra: Synchronize DMA before termination" This reverts commit 8814044fe0fa182abc9ff818d3da562de98bc9a7 because regressions were showing up. Suggested-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/dmaengine/20200319201140.17451-1-digetx@gmail.com/ Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 28 April 2020, 11:31:16 UTC |
068143a | Rayagonda Kokatanur | 22 March 2020, 18:20:19 UTC | i2c: iproc: generate stop event for slave writes When slave status is I2C_SLAVE_RX_END, generate I2C_SLAVE_STOP event to i2c_client. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 28 April 2020, 11:31:09 UTC |
a65aa9c | Vasily Averin | 27 April 2020, 05:32:51 UTC | drm/qxl: qxl_release leak in qxl_hw_surface_alloc() Cc: stable@vger.kernel.org Fixes: 8002db6336dd ("qxl: convert qxl driver to proper use for reservations") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Link: http://patchwork.freedesktop.org/patch/msgid/2e5a13ae-9ab2-5401-aa4d-03d5f5593423@virtuozzo.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 28 April 2020, 10:03:48 UTC |
85e9b88 | Vasily Averin | 27 April 2020, 05:32:46 UTC | drm/qxl: qxl_release leak in qxl_draw_dirty_fb() ret should be changed to release allocated struct qxl_release Cc: stable@vger.kernel.org Fixes: 8002db6336dd ("qxl: convert qxl driver to proper use for reservations") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Link: http://patchwork.freedesktop.org/patch/msgid/22cfd55f-07c8-95d0-a2f7-191b7153c3d4@virtuozzo.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 28 April 2020, 10:03:41 UTC |
45c5d2a | Gurchetan Singh | 08 April 2020, 23:29:38 UTC | drm/virtio: only destroy created contexts This can happen if userspace doesn't issue any 3D ioctls before closing the DRM fd. Fixes: 72b48ae800da ("drm/virtio: enqueue virtio_gpu_create_context after the first 3D ioctl") Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200408232938.55816-1-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 28 April 2020, 09:22:23 UTC |
292fed1 | Wei Yongjun | 27 April 2020, 12:49:35 UTC | selinux: fix error return code in cond_read_list() Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: 60abd3181db2 ("selinux: convert cond_list to array") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> | 27 April 2020, 21:44:39 UTC |
51184ae | Linus Torvalds | 27 April 2020, 20:32:46 UTC | Merge tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - regression fixes: - transaction leak when deleting unused block group - log cleanup after transaction abort - fix block group leak when removing fails - transaction leak if relocation recovery fails - fix SPDX header * tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix transaction leak in btrfs_recover_relocation btrfs: fix block group leak when removing fails btrfs: drop logs when we've aborted a transaction btrfs: fix memory leak of transaction when deleting unused block group btrfs: discard: Use the correct style for SPDX License Identifier | 27 April 2020, 20:32:46 UTC |
869997b | Linus Torvalds | 27 April 2020, 20:28:27 UTC | Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V fixes from Wei Liu: - Two patches from Dexuan fixing suspension bugs - Three cleanup patches from Andy and Michael * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyper-v: Remove internal types from UAPI header hyper-v: Use UUID API for exporting the GUID x86/hyperv: Suspend/resume the VP assist page for hibernation Drivers: hv: Move AEOI determination to architecture dependent code Drivers: hv: vmbus: Fix Suspend-to-Idle for Generation-2 VM | 27 April 2020, 20:28:27 UTC |
dbc05ae | Lyude Paul | 24 April 2020, 19:07:22 UTC | drm/dp_mst: Fix drm_dp_send_dpcd_write() return code drm_dp_mst_wait_tx_reply() returns > 1 if time elapsed in wait_event_timeout() before check_txmsg_state(mgr, txmsg) evaluated to true. However, we make the mistake of returning this time from drm_dp_send_dpcd_write() on success instead of returning the number of bytes written - causing spontaneous failures during link probing: [drm:drm_dp_send_link_address [drm_kms_helper]] *ERROR* GUID check on 10:01 failed: 3975 Yikes! So, fix this by returning the number of bytes written on success instead. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: cb897542c6d2 ("drm/dp_mst: Fix W=1 warnings") Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Sean Paul <sean@poorly.run> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200424190722.775284-1-lyude@redhat.com | 27 April 2020, 16:50:18 UTC |
2abaad4 | Chris Wilson | 27 April 2020, 09:30:38 UTC | drm/i915/gt: Check cacheline is valid before acquiring The hwsp_cacheline pointer from i915_request is very, very flimsy. The i915_request.timeline (and the hwsp_cacheline) are lost upon retiring (after an RCU grace). Therefore we need to confirm that once we have the right pointer for the cacheline, it is not in the process of being retired and disposed of before we attempt to acquire a reference to the cacheline. <3>[ 547.208237] BUG: KASAN: use-after-free in active_debug_hint+0x6a/0x70 [i915] <3>[ 547.208366] Read of size 8 at addr ffff88822a0d2710 by task gem_exec_parall/2536 <4>[ 547.208547] CPU: 3 PID: 2536 Comm: gem_exec_parall Tainted: G U 5.7.0-rc2-ged7a286b5d02d-kasan_117+ #1 <4>[ 547.208556] Hardware name: Dell Inc. XPS 13 9350/, BIOS 1.4.12 11/30/2016 <4>[ 547.208564] Call Trace: <4>[ 547.208579] dump_stack+0x96/0xdb <4>[ 547.208707] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.208719] print_address_description.constprop.6+0x16/0x310 <4>[ 547.208841] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.208963] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.208975] __kasan_report+0x137/0x190 <4>[ 547.209106] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.209127] kasan_report+0x32/0x50 <4>[ 547.209257] ? i915_gemfs_fini+0x40/0x40 [i915] <4>[ 547.209376] active_debug_hint+0x6a/0x70 [i915] <4>[ 547.209389] debug_print_object+0xa7/0x220 <4>[ 547.209405] ? lockdep_hardirqs_on+0x348/0x5f0 <4>[ 547.209426] debug_object_assert_init+0x297/0x430 <4>[ 547.209449] ? debug_object_free+0x360/0x360 <4>[ 547.209472] ? lock_acquire+0x1ac/0x8a0 <4>[ 547.209592] ? intel_timeline_read_hwsp+0x4f/0x840 [i915] <4>[ 547.209737] ? i915_active_acquire_if_busy+0x66/0x120 [i915] <4>[ 547.209861] i915_active_acquire_if_busy+0x66/0x120 [i915] <4>[ 547.209990] ? __live_alloc.isra.15+0xc0/0xc0 [i915] <4>[ 547.210005] ? rcu_read_lock_sched_held+0xd0/0xd0 <4>[ 547.210017] ? print_usage_bug+0x580/0x580 <4>[ 547.210153] intel_timeline_read_hwsp+0xbc/0x840 [i915] <4>[ 547.210284] __emit_semaphore_wait+0xd5/0x480 [i915] <4>[ 547.210415] ? i915_fence_get_timeline_name+0x110/0x110 [i915] <4>[ 547.210428] ? lockdep_hardirqs_on+0x348/0x5f0 <4>[ 547.210442] ? _raw_spin_unlock_irq+0x2a/0x40 <4>[ 547.210567] ? __await_execution.constprop.51+0x2e0/0x570 [i915] <4>[ 547.210706] i915_request_await_dma_fence+0x8f7/0xc70 [i915] Fixes: 85bedbf191e8 ("drm/i915/gt: Eliminate the trylock for reading a timeline's hwsp") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.6+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200427093038.29219-1-chris@chris-wilson.co.uk (cherry picked from commit 2759e395358b2b909577928894f856ab75bea41a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> | 27 April 2020, 16:47:40 UTC |
f524a77 | Chris Wilson | 22 April 2020, 07:28:05 UTC | drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma() While the ggtt vma are protected by their object lifetime, the list continues until it hits a non-ggtt vma, and that vma is not protected and may be freed as we inspect it. Hence, we require the obj->vma.lock to protect the list as we iterate. An example of forgetting to hold the obj->vma.lock is [1642834.464973] general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP PTI [1642834.464977] CPU: 3 PID: 1954 Comm: Xorg Not tainted 5.6.0-300.fc32.x86_64 #1 [1642834.464979] Hardware name: LENOVO 20ARS25701/20ARS25701, BIOS GJET94WW (2.44 ) 09/14/2017 [1642834.465021] RIP: 0010:i915_gem_object_set_tiling+0x2c0/0x3e0 [i915] [1642834.465024] Code: 8b 84 24 18 01 00 00 f6 c4 80 74 59 49 8b 94 24 a0 00 00 00 49 8b 84 24 e0 00 00 00 49 8b 74 24 10 48 8b 92 30 01 00 00 89 c7 <80> ba 0a 06 00 00 03 0f 87 86 00 00 00 ba 00 00 08 00 b9 00 00 10 [1642834.465025] RSP: 0018:ffffa98780c77d60 EFLAGS: 00010282 [1642834.465028] RAX: ffff8d232bfb2578 RBX: 0000000000000002 RCX: ffff8d25873a0000 [1642834.465029] RDX: dead000000000122 RSI: fffff0af8ac6e408 RDI: 000000002bfb2578 [1642834.465030] RBP: ffff8d25873a0000 R08: ffff8d252bfb5638 R09: 0000000000000000 [1642834.465031] R10: 0000000000000000 R11: ffff8d252bfb5640 R12: ffffa987801cb8f8 [1642834.465032] R13: 0000000000001000 R14: ffff8d233e972e50 R15: ffff8d233e972d00 [1642834.465034] FS: 00007f6a3d327f00(0000) GS:ffff8d25926c0000(0000) knlGS:0000000000000000 [1642834.465036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1642834.465037] CR2: 00007f6a2064d000 CR3: 00000002fb57c001 CR4: 00000000001606e0 [1642834.465038] Call Trace: [1642834.465083] i915_gem_set_tiling_ioctl+0x122/0x230 [i915] [1642834.465121] ? i915_gem_object_set_tiling+0x3e0/0x3e0 [i915] [1642834.465151] drm_ioctl_kernel+0x86/0xd0 [drm] [1642834.465156] ? avc_has_perm+0x3b/0x160 [1642834.465178] drm_ioctl+0x206/0x390 [drm] [1642834.465216] ? i915_gem_object_set_tiling+0x3e0/0x3e0 [i915] [1642834.465221] ? selinux_file_ioctl+0x122/0x1c0 [1642834.465226] ? __do_munmap+0x24b/0x4d0 [1642834.465231] ksys_ioctl+0x82/0xc0 [1642834.465235] __x64_sys_ioctl+0x16/0x20 [1642834.465238] do_syscall_64+0x5b/0xf0 [1642834.465243] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1642834.465245] RIP: 0033:0x7f6a3d7b047b [1642834.465247] Code: 0f 1e fa 48 8b 05 1d aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed a9 0c 00 f7 d8 64 89 01 48 [1642834.465249] RSP: 002b:00007ffe71adba28 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [1642834.465251] RAX: ffffffffffffffda RBX: 000055f99048fa40 RCX: 00007f6a3d7b047b [1642834.465253] RDX: 00007ffe71adba30 RSI: 00000000c0106461 RDI: 000000000000000e [1642834.465254] RBP: 0000000000000002 R08: 000055f98f3f1798 R09: 0000000000000002 [1642834.465255] R10: 0000000000001000 R11: 0000000000000246 R12: 0000000000000080 [1642834.465257] R13: 000055f98f3f1690 R14: 00000000c0106461 R15: 00007ffe71adba30 Now to take the spinlock during the list iteration, we need to break it down into two phases. In the first phase under the lock, we cannot sleep and so must defer the actual work to a second list, protected by the ggtt->mutex. We also need to hold the spinlock during creation of a new vma to serialise with updates of the tiling on the object. Reported-by: Dave Airlie <airlied@redhat.com> Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422072805.17340-1-chris@chris-wilson.co.uk (cherry picked from commit cb593e5d2b6d3ad489669914d9fd1c64c7a4a6af) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> | 27 April 2020, 16:47:37 UTC |
5d5e100 | Xiyu Yang | 20 April 2020, 05:41:54 UTC | drm/i915/selftests: Fix i915_address_space refcnt leak igt_ppgtt_pin_update() invokes i915_gem_context_get_vm_rcu(), which returns a reference of the i915_address_space object to "vm" with increased refcount. When igt_ppgtt_pin_update() returns, "vm" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in two exception handling paths of igt_ppgtt_pin_update(). When i915_gem_object_create_internal() returns IS_ERR, the refcnt increased by i915_gem_context_get_vm_rcu() is not decreased, causing a refcnt leak. Fix this issue by jumping to "out_vm" label when i915_gem_object_create_internal() returns IS_ERR. Fixes: a4e7ccdac38e ("drm/i915: Move context management under GEM") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1587361342-83494-1-git-send-email-xiyuyang19@fudan.edu.cn (cherry picked from commit e07c7606a00c4361bad72ff4e72ed0dfbefa23b0) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> | 27 April 2020, 16:47:33 UTC |
5b0bbee | Jens Axboe | 27 April 2020, 16:41:22 UTC | io_uring: statx must grab the file table for valid fd Clay reports that OP_STATX fails for a test case with a valid fd and empty path: -- Test 0: statx:fd 3: SUCCEED, file mode 100755 -- Test 1: statx:path ./uring_statx: SUCCEED, file mode 100755 -- Test 2: io_uring_statx:fd 3: FAIL, errno 9: Bad file descriptor -- Test 3: io_uring_statx:path ./uring_statx: SUCCEED, file mode 100755 This is due to statx not grabbing the process file table, hence we can't lookup the fd in async context. If the fd is valid, ensure that we grab the file table so we can grab the file from async context. Cc: stable@vger.kernel.org # v5.6 Reported-by: Clay Harris <bugs@claycon.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 27 April 2020, 16:41:22 UTC |
b9f9602 | Andy Shevchenko | 24 April 2020, 16:11:42 UTC | dmaengine: dmatest: Fix iteration non-stop logic Under some circumstances, i.e. when test is still running and about to time out and user runs, for example, grep -H . /sys/module/dmatest/parameters/* the iterations parameter is not respected and test is going on and on until user gives echo 0 > /sys/module/dmatest/parameters/run This is not what expected. The history of this bug is interesting. I though that the commit 2d88ce76eb98 ("dmatest: add a 'wait' parameter") is a culprit, but looking closer to the code I think it simple revealed the broken logic from the day one, i.e. in the commit 0a2ff57d6fba ("dmaengine: dmatest: add a maximum number of test iterations") which adds iterations parameter. So, to the point, the conditional of checking the thread to be stopped being first part of conjunction logic prevents to check iterations. Thus, we have to always check both conditions to be able to stop after given iterations. Since it wasn't visible before second commit appeared, I add a respective Fixes tag. Fixes: 2d88ce76eb98 ("dmatest: add a 'wait' parameter") Cc: Dan Williams <dan.j.williams@intel.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200424161147.16895-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> | 27 April 2020, 16:15:35 UTC |
664475c | Dmitry Osipenko | 26 April 2020, 19:08:35 UTC | dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization DMA synchronization hook checks whether interrupt is raised by testing corresponding bit in a hardware status register, and thus, clock should be enabled in this case, otherwise CPU may hang if synchronization is invoked while Runtime PM is in suspended state. This patch resumes the RPM during of the DMA synchronization process in order to avoid potential problems. It is a minor clean up of a previous commit, no real problem is fixed by this patch because currently RPM is always in a resumed state while DMA is synchronized, although this may change in the future. Fixes: 6697255f239f ("dmaengine: tegra-apb: Improve DMA synchronization") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200426190835.21950-1-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> | 27 April 2020, 16:05:35 UTC |
0821009 | Dave Jiang | 13 April 2020, 17:40:12 UTC | dmaengine: fix channel index enumeration When the channel register code was changed to allow hotplug operations, dynamic indexing wasn't taken into account. When channels are randomly plugged and unplugged out of order, the serial indexing breaks. Convert channel indexing to using IDA tracking in order to allow dynamic assignment. The previous code does not cause any regression bug for existing channel allocation besides idxd driver since the hotplug usage case is only used by idxd at this point. With this change, the chan->idr_ref is also not needed any longer. We can have a device with no channels registered due to hot plug. The channel device release code no longer should attempt to free the dma device id on the last channel release. Fixes: e81274cd6b52 ("dmaengine: add support to dynamic register/unregister of channels") Reported-by: Yixin Zhang <yixin.zhang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Yixin Zhang <yixin.zhang@intel.com> Link: https://lore.kernel.org/r/158679961260.7674.8485924270472851852.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> | 27 April 2020, 15:56:23 UTC |
fcc9973 | Qu Wenruo | 27 April 2020, 06:50:14 UTC | btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info [BUG] One run of btrfs/063 triggered the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.6.0-rc7-custom+ #48 Not tainted -------------------------------------------- kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_internal#2); lock(sb_internal#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u24:0/7: #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80 #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80 #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs] stack backtrace: CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] Call Trace: dump_stack+0xc2/0x11a __lock_acquire.cold+0xce/0x214 lock_acquire+0xe6/0x210 __sb_start_write+0x14e/0x290 start_transaction+0x66c/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] find_free_extent+0x1504/0x1a50 [btrfs] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] btrfs_alloc_tree_block+0x1ac/0x570 [btrfs] btrfs_copy_root+0x213/0x580 [btrfs] create_reloc_root+0x3bd/0x470 [btrfs] btrfs_init_reloc_root+0x2d2/0x310 [btrfs] record_root_in_trans+0x191/0x1d0 [btrfs] btrfs_record_root_in_trans+0x90/0xd0 [btrfs] start_transaction+0x16e/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs] finish_ordered_fn+0x15/0x20 [btrfs] btrfs_work_helper+0x116/0x9a0 [btrfs] process_one_work+0x632/0xb80 worker_thread+0x80/0x690 kthread+0x1a3/0x1f0 ret_from_fork+0x27/0x50 It's pretty hard to reproduce, only one hit so far. [CAUSE] This is because we're calling btrfs_join_transaction() without re-using the current running one: btrfs_finish_ordered_io() |- btrfs_join_transaction() <<< Call #1 |- btrfs_record_root_in_trans() |- btrfs_reserve_extent() |- btrfs_join_transaction() <<< Call #2 Normally such btrfs_join_transaction() call should re-use the existing one, without trying to re-start a transaction. But the problem is, in btrfs_join_transaction() call #1, we call btrfs_record_root_in_trans() before initializing current::journal_info. And in btrfs_join_transaction() call #2, we're relying on current::journal_info to avoid such deadlock. [FIX] Call btrfs_record_root_in_trans() after we have initialized current::journal_info. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> | 27 April 2020, 15:16:07 UTC |
f135cea | Filipe Manana | 23 April 2020, 15:30:53 UTC | btrfs: fix partial loss of prealloc extent past i_size after fsync When we have an inode with a prealloc extent that starts at an offset lower than the i_size and there is another prealloc extent that starts at an offset beyond i_size, we can end up losing part of the first prealloc extent (the part that starts at i_size) and have an implicit hole if we fsync the file and then have a power failure. Consider the following example with comments explaining how and why it happens. $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt # Create our test file with 2 consecutive prealloc extents, each with a # size of 128Kb, and covering the range from 0 to 256Kb, with a file # size of 0. $ xfs_io -f -c "falloc -k 0 128K" /mnt/foo $ xfs_io -c "falloc -k 128K 128K" /mnt/foo # Fsync the file to record both extents in the log tree. $ xfs_io -c "fsync" /mnt/foo # Now do a redudant extent allocation for the range from 0 to 64Kb. # This will merely increase the file size from 0 to 64Kb. Instead we # could also do a truncate to set the file size to 64Kb. $ xfs_io -c "falloc 0 64K" /mnt/foo # Fsync the file, so we update the inode item in the log tree with the # new file size (64Kb). This also ends up setting the number of bytes # for the first prealloc extent to 64Kb. This is done by the truncation # at btrfs_log_prealloc_extents(). # This means that if a power failure happens after this, a write into # the file range 64Kb to 128Kb will not use the prealloc extent and # will result in allocation of a new extent. $ xfs_io -c "fsync" /mnt/foo # Now set the file size to 256K with a truncate and then fsync the file. # Since no changes happened to the extents, the fsync only updates the # i_size in the inode item at the log tree. This results in an implicit # hole for the file range from 64Kb to 128Kb, something which fsck will # complain when not using the NO_HOLES feature if we replay the log # after a power failure. $ xfs_io -c "truncate 256K" -c "fsync" /mnt/foo So instead of always truncating the log to the inode's current i_size at btrfs_log_prealloc_extents(), check first if there's a prealloc extent that starts at an offset lower than the i_size and with a length that crosses the i_size - if there is one, just make sure we truncate to a size that corresponds to the end offset of that prealloc extent, so that we don't lose the part of that extent that starts at i_size if a power failure happens. A test case for fstests follows soon. Fixes: 31d11b83b96f ("Btrfs: fix duplicate extents after fsync of file with prealloc extents") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> | 27 April 2020, 15:16:07 UTC |
132be62 | Niklas Cassel | 27 April 2020, 12:34:41 UTC | nvme: prevent double free in nvme_alloc_ns() error handling When jumping to the out_put_disk label, we will call put_disk(), which will trigger a call to disk_release(), which calls blk_put_queue(). Later in the cleanup code, we do blk_cleanup_queue(), which will also call blk_put_queue(). Putting the queue twice is incorrect, and will generate a KASAN splat. Set the disk->queue pointer to NULL, before calling put_disk(), so that the first call to blk_put_queue() will not free the queue. The second call to blk_put_queue() uses another pointer to the same queue, so this call will still free the queue. Fixes: 85136c010285 ("lightnvm: simplify geometry enumeration") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 27 April 2020, 15:08:06 UTC |
b0d3869 | Al Viro | 27 April 2020, 14:26:22 UTC | propagate_one(): mnt_set_mountpoint() needs mount_lock ... to protect the modification of mp->m_count done by it. Most of the places that modify that thing also have namespace_lock held, but not all of them can do so, so we really need mount_lock here. Kudos to Piotr Krysiuk <piotras@gmail.com>, who'd spotted a related bug in pivot_root(2) (fixed unnoticed in 5.3); search for other similar turds has caught out this one. Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 27 April 2020, 14:37:14 UTC |
a5bff92 | Daniel Vetter | 07 April 2020, 13:30:02 UTC | dma-buf: Fix SET_NAME ioctl uapi The uapi is the same on 32 and 64 bit, but the number isn't. Everyone who botched this please re-read: https://www.kernel.org/doc/html/v5.4-preprc-cpu/ioctl/botching-up-ioctls.html Also, the type argument for the ioctl macros is for the type the void __user *arg pointer points at, which in this case would be the variable-sized char[] of a 0 terminated string. So this was botched in more than just the usual ways. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Chenbo Feng <fengc@google.com> Cc: Greg Hackmann <ghackmann@google.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: minchan@kernel.org Cc: surenb@google.com Cc: jenhaochen@google.com Cc: Martin Liu <liumartin@google.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Martin Liu <liumartin@google.com> Reviewed-by: Martin Liu <liumartin@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: updated some checkpatch fixes, corrected author email] Link: https://patchwork.freedesktop.org/patch/msgid/20200407133002.3486387-1-daniel.vetter@ffwll.ch | 27 April 2020, 10:59:41 UTC |
a9b760b | Kai-Heng Feng | 21 April 2020, 07:55:16 UTC | PM: ACPI: Output correct message on target power state Transitioned power state logged at the end of setting ACPI power. However, D3cold won't be in the message because state can only be D3hot at most. Use target_state to corretly report when power state is D3cold. Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 27 April 2020, 08:33:40 UTC |