Revision 10006e92288fed97595dccac0721ff01abbe61ee authored by Felix Ruess on 13 June 2013, 15:13:13 UTC, committed by Felix Ruess on 13 June 2013, 15:13:13 UTC
Use the gpio_enable_clock helper function. Also remove the unused scl_pin and sda_pin variables in the i2c struct.
1 parent e7bca1f
CHANGELOG.md
Paparazzi 4.9 - development branch
==================================
- STM libs completely replaced by libopencm3
- Input2ivy uses SDL for joysticks (cross-platform, works on OSX as well now)
[#220] (https://github.com/paparazzi/paparazzi/pull/220)
- Option to change text papget color using a combobox
[#194] (https://github.com/paparazzi/paparazzi/pull/194)
Paparazzi 4.2.0_stable
======================
Stable version release
Since last stable v4.0:
- Total energy control
- Improve Google map tiles download
- Several updates on the Digital Cam and photogrammetry modules
- WMM210 model
- Rate limiter in airframes control laws
- Uart flow control (stm32)
- Bug fix for INS and AHRS filters
- AP/FBW separation using spi or uart
- Sensors fix and addition (GPS, current, baro)
Paparazzi 4.1.1_testing
=======================
Second release candidate for next stable release.
- Run AP and FBW on separate boards
[#297] (https://github.com/paparazzi/paparazzi/pull/297)
- Separate Board Files for yapa_v2.0
[#303] (https://github.com/paparazzi/paparazzi/pull/303)
- Add UART hardware flow control (for STM32 only)
[#289] (https://github.com/paparazzi/paparazzi/pull/289)
- Add ezosd current sensor module
[#292] (https://github.com/paparazzi/paparazzi/pull/292)
- Paparazzi Center: fix coloration by passing input buffer line by line, set language to english
- Rate limiter bugfix
- DC_SHOT message photo numbers shown in GCS
- home mode height can be set different from security height
- Ahrs float_dcm uses magnetic heading while not inflight for better initial guess
[#299] (https://github.com/paparazzi/paparazzi/pull/299)
- Outback Challenge "Safety" Rules 1 and 2
- Added WMM2010 Geo model used in ahrs int_cmpl_quat for rotorcrafts
[#288] (https://github.com/paparazzi/paparazzi/pull/288)
- Fix missing gain definitions from airframe file in total energy control
- Added stm32loader to sw/tools
- Change vsupply to be a uint16 to enable reporting of voltages higher than 25.5V
[#294] (https://github.com/paparazzi/paparazzi/issues/294)
- Digital cam module: release camera button on init
- Fix second order term in propagation of x-position in HFF
Paparazzi 4.1.0_testing
=======================
First release candidate for next stable release.
- Total energy control
[#251] (https://github.com/paparazzi/paparazzi/pull/251)
- PPM input on UART1 RX for Lisa/M autopilots
- Rate Limiter for Flaps, Gears and servo hatches
[#252] (https://github.com/paparazzi/paparazzi/pull/252)
- GPS acceleration compensation in ahrs_float_dcm
[#255] (https://github.com/paparazzi/paparazzi/pull/255)
- Improved gravity heuristic for int_cmpl_quat
- Some updates on digital_cam and photogrammetry modules
[#250] (https://github.com/paparazzi/paparazzi/pull/250)
- Replace wget by OCaml Http_client from netclient lib to download files
[#276] (https://github.com/paparazzi/paparazzi/pull/276)
Paparazzi 4.0.3
===============
Maintenance release
- fix google map version download
- fix BMP scripts for stm32
- fix lisa/m 2.0 default voltage
- fix gpsd2ivy for libgps3.5
- improve some makefiles
Paparazzi 4.0.2
===============
Maintenance release
- fix some illegal xml chars in xml description for xtend_rssi and pwm_meas modules
- fix ins_arduimu_basic by adding an empty ahrs_update_gps function
- fix some ivy includes on OSX for weird installation cases
- fix ACTUATORS_PWM_NB for fixedwings with USE_SERVOS_7AND8
- updated kestrel weather meter agent
- fix uart_tunnel if leds are not available on some boards
- fix GPS_LLA message
- fix make failure when trying to get google maps version, but no internet connection
[#187] (https://github.com/paparazzi/paparazzi/issues/187)
Paparazzi 4.0.1
===============
Maintenance release
- Serious fix for settings:
- Handler was not called if module was not specfied as well.
Now an error is generated with info on which file to fix.
- Settings for adaptive fw stabilization fixed.
- Fixes for photogrammetry module.
- Fixes for digital_cam modules.
- Tool added: mergelogs
Paparazzi 4.0
=============
Changes since old_master tag
General
-------
- Settings for the telemetry modes are automatically generated from the XML file
[#118] (https://github.com/paparazzi/paparazzi/pull/118)
- Documentation node for modules
[#182] (https://github.com/paparazzi/paparazzi/pull/182)
- Automatic conversion of units in airframe file, settings and messages.
See http://paparazzi.enac.fr/wiki/Units
- Fix rc_settings: this enables you to change some settings in flight
directly from the RC, is useful if you are alone or don't have a GCS.
- Prefer compiler found in PATH over /opt/paparazzi/arm-multilib
[#231] (https://github.com/paparazzi/paparazzi/issues/231)
- Usability improvements for calibration scripts and
added 3D view of magnetometer data with fitted ellipsoid
New hardware support
--------------------
- Support for new autopilot boards
- [Umarim] (http://paparazzi.enac.fr/wiki/Umarim_v10)
- [Umarim Lite] (http://paparazzi.enac.fr/wiki/Umarim_Lite_v2)
- [NavGo] (http://paparazzi.enac.fr/wiki/NavGo_v3)
- [Lisa/M 2.0] (http://paparazzi.enac.fr/wiki/Lisa/M_v20)
- IMU Aspirin 2.1 support
- BlackMagicProbe JTAG support
Airborne
--------
- All control gains are now positive
[#127] (https://github.com/paparazzi/paparazzi/pull/127)
- RC input follows sign conventions
[#124] (https://github.com/paparazzi/paparazzi/issues/124)
- A modification of the transport layer (pprz and xbee)
in order to allow to select the device at the message level.
- New modules:
- xtend_rssi
[#88] (https://github.com/paparazzi/paparazzi/pull/88)
- open_log
[#82] (https://github.com/paparazzi/paparazzi/pull/82)
- Subsystem for new ahrs estimation algorithms: float_cmpl_rmat
- Improvements for AHRS int_cmpl_quat and float_cmpl_rmat
- Correction of centrifugal acceleration
- Proper handling of BODY_TO_IMU rotations
- All status LEDs configurable (with sensible defaults for the boards):
SYS_TIME_LED, AHRS_ALIGNER_LED, BARO_LED, GPS_LED, RADIO_CONTROL_LED
- Possibility to use two 2-way switches for the mode instead of one 3-way switch
- GPS NMEA parser usable for basic position and fix
[#120] (https://github.com/paparazzi/paparazzi/issues/120)
Rotorcraft firmware specific
----------------------------
- Stabilization/supervision commands with standard PPRZ range
[#169] (https://github.com/paparazzi/paparazzi/pull/169)
- Additional motor arming options
[#174] (https://github.com/paparazzi/paparazzi/pull/174)
- Replaced INV_M with NOMINAL_HOVER_THROTTLE (in %)
To use a fixed value instead of the adaptive vertical filter
[#177] (https://github.com/paparazzi/paparazzi/pull/177)
- Some fixes when changing vertical guidance modes
- Same behaviour (gains) for AP_MODE_HOVER and NAV when holding position
[#82] (https://github.com/paparazzi/paparazzi/pull/82)
Fixedwing firmware specific
---------------------------
- Using a gyro (with IR sensors) is done via imu subsystem now as well
Simulator
---------
- JSBSim interface updated for new FGAccelerations class
- FlightGear interface defaults to version 2.6, define FG_2_4 for 2.4
- NPS simulator [#205] (https://github.com/paparazzi/paparazzi/pull/205)
- has it's own nps target (instead of sim)
- fdm type renamed from nps to jsbsim
- waypoint altitude fixed
- Improved ground interaction for JSBSim, can now initialize on ground
[#222] (https://github.com/paparazzi/paparazzi/pull/222)
- Radio control via joystick now uses SDL (so works on OSX as well)
[#232] (https://github.com/paparazzi/paparazzi/pull/232)
STM32 architecture
------------------
- Luftboot USB bootloader
- Updated ADC defines for lisa/m
You should now be able to use ADC_1, ADC_2, ADC_3 for the ADCs on the ANALOG1
[#159] (https://github.com/paparazzi/paparazzi/issues/159)
- Enable second spektrum receiver via
```<configure name="USE_SECONDARY_SPEKTRUM_RECEIVER" value="1"/>```
- Enable new I2C driver via
```<configure name="USE_NEW_I2C_DRIVER"/>```
Computing file changes ...