Revision 10626fac1569ea37839c37b105681cd08dbe6658 authored by cvs2svn on 23 February 2007, 12:49:10 UTC, committed by cvs2svn on 23 February 2007, 12:49:10 UTC
INSTALL.W32
INSTALLATION ON THE WIN32 PLATFORM
----------------------------------
[Instructions for building for Windows CE can be found in INSTALL.WCE]
Heres a few comments about building OpenSSL in Windows environments. Most
of this is tested on Win32 but it may also work in Win 3.1 with some
modification.
You need Perl for Win32. Unless you will build on Cygwin, you will need
ActiveState Perl, available from http://www.activestate.com/ActivePerl.
and one of the following C compilers:
* Visual C++
* Borland C
* GNU C (Cygwin or MinGW)
If you are compiling from a tarball or a CVS snapshot then the Win32 files
may well be not up to date. This may mean that some "tweaking" is required to
get it all to work. See the trouble shooting section later on for if (when?)
it goes wrong.
Visual C++
----------
If you want to compile in the assembly language routines with Visual C++ then
you will need an assembler. This is worth doing because it will result in
faster code: for example it will typically result in a 2 times speedup in the
RSA routines. Currently the following assemblers are supported:
* Microsoft MASM (aka "ml")
* Free Netwide Assembler NASM.
MASM is distributed with most versions of VC++. For the versions where it is
not included in VC++, it is also distributed with some Microsoft DDKs, for
example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
either of these DDKs then you can just download the binaries for the Windows
98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
downloaded from the Microsoft developers site www.msdn.com.
NASM is freely available. Version 0.98 was used during testing: other versions
may also work. It is available from many places, see for example:
http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
Firstly you should run Configure (to build a FIPS-certified variant of
OpenSSL, add the option "fips"):
> perl Configure VC-WIN32
Next you need to build the Makefiles and optionally the assembly language
files (to build a FIPS-certified variant of OpenSSL, add the argument "fips"):
- If you are using MASM then run:
> ms\do_masm
- If you are using NASM then run:
> ms\do_nasm
- If you don't want to use the assembly language files at all then run:
> ms\do_ms
If you get errors about things not having numbers assigned then check the
troubleshooting section: you probably won't be able to compile it as it
stands.
Then from the VC++ environment at a prompt do:
> nmake -f ms\ntdll.mak
If all is well it should compile and you will have some DLLs and executables
in out32dll. If you want to try the tests then do:
> cd out32dll
> ..\ms\test
Tweaks:
There are various changes you can make to the Win32 compile environment. By
default the library is not compiled with debugging symbols. If you add 'debug'
to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
compiled in. Note that mk1mf.pl expects the platform to be the last argument
on the command line, so 'debug' must appear before that, as all other options.
The default Win32 environment is to leave out any Windows NT specific
features.
If you want to enable the NT specific features of OpenSSL (currently only the
logging BIO) follow the instructions above but call the batch file do_nt.bat
instead of do_ms.bat.
You can also build a static version of the library using the Makefile
ms\nt.mak
Borland C++ builder 5
---------------------
* Configure for building with Borland Builder (to build a FIPS-certified
variant of OpenSSL, add the option "fips"):
> perl Configure BC-32
* Create the appropriate makefile (to build a FIPS-certified variant of
OpenSSL, add the argument "fips")
> ms\do_nasm
* Build
> make -f ms\bcb.mak
Borland C++ builder 3 and 4
---------------------------
* Setup PATH. First must be GNU make then bcb4/bin
* Run ms\bcb4.bat
* Run make:
> make -f bcb.mak
GNU C (Cygwin)
--------------
Cygwin provides a bash shell and GNU tools environment running
on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
Consequently, a make of OpenSSL with Cygwin is closer to a GNU
bash environment such as Linux than to other the other Win32
makes.
Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
It is also possible to create Win32 binaries that only use the
Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
MinGW. MinGW can be used in the Cygwin development environment
or in a standalone setup as described in the following section.
To build OpenSSL using Cygwin:
* Install Cygwin (see http://cygwin.com/)
* Install Perl and ensure it is in the path. Both Cygwin perl
(5.6.1-2 or newer) and ActivePerl work.
* Run the Cygwin bash shell
* $ tar zxvf openssl-x.x.x.tar.gz
$ cd openssl-x.x.x
To build the Cygwin version of OpenSSL:
$ ./config
[...]
$ make
[...]
$ make test
$ make install
This will create a default install in /usr/local/ssl.
To build the MinGW version (native Windows) in Cygwin:
$ ./Configure mingw
[...]
$ make
[...]
$ make test
$ make install
Cygwin Notes:
"make test" and normal file operations may fail in directories
mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
stripping of carriage returns. To avoid this ensure that a binary
mount is used, e.g. mount -b c:\somewhere /home.
"bc" is not provided in older Cygwin distribution. This causes a
non-fatal error in "make test" but is otherwise harmless. If
desired and needed, GNU bc can be built with Cygwin without change.
GNU C (MinGW)
-------------
* Compiler installation:
MinGW is available from http://www.mingw.org. Run the installer and
set the MinGW bin directory to the PATH in "System Properties" or
autoexec.bat.
* Compile OpenSSL:
> ms\mingw32
This will create the library and binaries in out. In case any problems
occur, try
> ms\mingw32 no-asm
instead.
If you want to build a FIPS-certified variant of OpenSSL, add the argument
"fips"
libcrypto.a and libssl.a are the static libraries. To use the DLLs,
link with libeay32.a and libssl32.a instead.
See troubleshooting if you get error messages about functions not having
a number assigned.
* You can now try the tests:
> cd out
> ..\ms\test
Installation
------------
If you used the Cygwin procedure above, you have already installed and
can skip this section. For all other procedures, there's currently no real
installation procedure for Win32. There are, however, some suggestions:
- do nothing. The include files are found in the inc32/ subdirectory,
all binaries are found in out32dll/ or out32/ depending if you built
dynamic or static libraries.
- do as is written in INSTALL.Win32 that comes with modssl:
$ md c:\openssl
$ md c:\openssl\bin
$ md c:\openssl\lib
$ md c:\openssl\include
$ md c:\openssl\include\openssl
$ copy /b inc32\openssl\* c:\openssl\include\openssl
$ copy /b out32dll\ssleay32.lib c:\openssl\lib
$ copy /b out32dll\libeay32.lib c:\openssl\lib
$ copy /b out32dll\ssleay32.dll c:\openssl\bin
$ copy /b out32dll\libeay32.dll c:\openssl\bin
$ copy /b out32dll\openssl.exe c:\openssl\bin
Of course, you can choose another device than c:. C: is used here
because that's usually the first (and often only) harddisk device.
Note: in the modssl INSTALL.Win32, p: is used rather than c:.
Troubleshooting
---------------
Since the Win32 build is only occasionally tested it may not always compile
cleanly. If you get an error about functions not having numbers assigned
when you run ms\do_ms then this means the Win32 ordinal files are not up to
date. You can do:
> perl util\mkdef.pl crypto ssl update
then ms\do_XXX should not give a warning any more. However the numbers that
get assigned by this technique may not match those that eventually get
assigned in the CVS tree: so anything linked against this version of the
library may need to be recompiled.
If you get errors about unresolved symbols there are several possible
causes.
If this happens when the DLL is being linked and you have disabled some
ciphers then it is possible the DEF file generator hasn't removed all
the disabled symbols: the easiest solution is to edit the DEF files manually
to delete them. The DEF files are ms\libeay32.def ms\ssleay32.def.
Another cause is if you missed or ignored the errors about missing numbers
mentioned above.
If you get warnings in the code then the compilation will halt.
The default Makefile for Win32 halts whenever any warnings occur. Since VC++
has its own ideas about warnings which don't always match up to other
environments this can happen. The best fix is to edit the file with the
warning in and fix it. Alternatively you can turn off the halt on warnings by
editing the CFLAG line in the Makefile and deleting the /WX option.
You might get compilation errors. Again you will have to fix these or report
them.
One final comment about compiling applications linked to the OpenSSL library.
If you don't use the multithreaded DLL runtime library (/MD option) your
program will almost certainly crash because malloc gets confused -- the
OpenSSL DLLs are statically linked to one version, the application must
not use a different one. You might be able to work around such problems
by adding CRYPTO_malloc_init() to your program before any calls to the
OpenSSL libraries: This tells the OpenSSL libraries to use the same
malloc(), free() and realloc() as the application. However there are many
standard library functions used by OpenSSL that call malloc() internally
(e.g. fopen()), and OpenSSL cannot change these; so in general you cannot
rely on CRYPTO_malloc_init() solving your problem, and you should
consistently use the multithreaded library.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...