Revision 10f92eb7c6b4e8069c2defd2ad23b74f31f8962d authored by Richard Purdie on 14 October 2005, 15:07:26 UTC, committed by Russell King on 14 October 2005, 15:07:26 UTC
Patch from Richard Purdie Update corgi_lcd to use bus_find_device to locate the pxafb device hence fixing a compile error. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
1 parent cb38c56
cpufreq-nforce2.txt
The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 plattforms.
This works better than on other plattforms, because the FSB of the CPU
can be controlled independently from the PCI/AGP clock.
The module has two options:
fid: multiplier * 10 (for example 8.5 = 85)
min_fsb: minimum FSB
If not set, fid is calculated from the current CPU speed and the FSB.
min_fsb defaults to FSB at boot time - 50 MHz.
IMPORTANT: The available range is limited downwards!
Also the minimum available FSB can differ, for systems
booting with 200 MHz, 150 should always work.
Computing file changes ...
