| 122e2cb | Lukasz Tyl | 14 June 2023, 12:25:24 UTC | ALSA: usb-audio: Add quirk flag for HEM devices to enable native DSD playback This commit adds new DEVICE_FLG with QUIRK_FLAG_DSD_RAW and Vendor Id for HEM devices which supports native DSD. Prior to this change Linux kernel was not enabling native DSD playback for HEM devices, and as a result, DSD audio was being converted to PCM "on the fly". HEM devices, when connected to the system, would only play audio in PCM format, even if the source material was in DSD format. With the addition of new VENDOR_FLG in the quircks.c file, the devices are now correctly recognized, and raw DSD data is transmitted to the device, allowing for native DSD playback. Signed-off-by: Lukasz Tyl <ltyl@hem-e.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230614122524.30271-1-ltyl@hem-e.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 June 2023, 07:28:18 UTC |
| 8ba61c9 | Takashi Iwai | 12 June 2023, 13:28:18 UTC | ALSA: usb-audio: Fix broken resume due to UAC3 power state As reported in the bugzilla below, the PM resume of a UAC3 device may fail due to the incomplete power state change, stuck at D1. The reason is that the driver expects the full D0 power state change only at hw_params, while the normal PCM resume procedure doesn't call hw_params. For fixing the bug, we add the same power state update to D0 at the prepare callback, which is certainly called by the resume procedure. Note that, with this change, the power state change in the hw_params becomes almost redundant, since snd_usb_hw_params() doesn't touch the parameters (at least it tires so). But dropping it is still a bit risky (e.g. we have the media-driver binding), so I leave the D0 power state change in snd_usb_hw_params() as is for now. Fixes: a0a4959eb4e9 ("ALSA: usb-audio: Operate UAC3 Power Domains in PCM callbacks") Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217539 Link: https://lore.kernel.org/r/20230612132818.29486-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 June 2023, 07:28:08 UTC |
| 297224f | Takashi Iwai | 12 June 2023, 12:55:33 UTC | ALSA: seq: oss: Fix racy open/close of MIDI devices Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be called concurrently from different code paths, we have no proper data protection against races. Introduce open_mutex to each seq_oss_midi object for avoiding the races. Reported-by: "Gong, Sishuai" <sishuai@purdue.edu> Closes: https://lore.kernel.org/r/7DC9AF71-F481-4ABA-955F-76C535661E33@purdue.edu Link: https://lore.kernel.org/r/20230612125533.27461-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 June 2023, 07:26:41 UTC |
| a2a8714 | Edson Juliano Drosdeck | 09 June 2023, 20:10:58 UTC | ALSA: hda/realtek: Add a quirk for Compaq N14JP6 Add a quirk for Compaq N14JP6 to fixup ALC897 headset MIC no sound. Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230609201058.523499-1-edson.drosdeck@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 10 June 2023, 06:44:19 UTC |
| b752a38 | Chris Chiu | 06 June 2023, 14:57:47 UTC | ALSA: hda/realtek: Enable 4 amplifiers instead of 2 on a HP platform In the commit 7bb62340951a ("ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform"), speakers and LEDs are fixed but only 2 CS35L41 amplifiers on SPI bus connected to Realtek codec are enabled. Need the ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED to get all amplifiers working. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Fixes: 7bb62340951a ("ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230606145747.135966-1-chris.chiu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 06 June 2023, 15:44:24 UTC |
| 08c9aa7 | Takashi Iwai | 06 June 2023, 13:09:42 UTC | Merge tag 'asoc-fix-v6.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.4 A lot of routine driver specific fixes here, nothing in the core though there are a couple of fixes for the generic cards. There's also a few new quirks for x86 platforms. | 06 June 2023, 13:09:42 UTC |
| 5c219a3 | Takashi Iwai | 06 June 2023, 09:38:55 UTC | ALSA: hda: Fix kctl->id initialization HD-audio core code replaces the kctl->id.index of SPDIF-related controls after assigning via snd_ctl_add(). This doesn't work any longer with the new Xarray lookup change. The change of the kctl->id content has to be done via snd_ctl_rename_id() helper, instead. Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups") Cc: <stable@vger.kernel.org> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230606093855.14685-5-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 06 June 2023, 12:31:18 UTC |
| c5ae57b | Takashi Iwai | 06 June 2023, 09:38:54 UTC | ALSA: gus: Fix kctl->id initialization GUS driver replaces the kctl->id.index after assigning the kctl via snd_ctl_add(). This doesn't work any longer with the new Xarray lookup change. It has to be set before snd_ctl_add() call instead. Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups") Cc: <stable@vger.kernel.org> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230606093855.14685-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 06 June 2023, 12:31:05 UTC |
| f2f312a | Takashi Iwai | 06 June 2023, 09:38:53 UTC | ALSA: cmipci: Fix kctl->id initialization cmipci driver replaces the kctl->id.device after assigning the kctl via snd_ctl_add(). This doesn't work any longer with the new Xarray lookup change. It has to be set before snd_ctl_add() call instead. Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups") Cc: <stable@vger.kernel.org> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230606093855.14685-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 06 June 2023, 12:30:48 UTC |
| c9b83ae | Takashi Iwai | 06 June 2023, 09:38:52 UTC | ALSA: ymfpci: Fix kctl->id initialization ymfpci driver replaces the kctl->id.device after assigning the kctl via snd_ctl_add(). This doesn't work any longer with the new Xarray lookup change. It has to be set before snd_ctl_add() call instead. Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups") Cc: <stable@vger.kernel.org> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230606093855.14685-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 06 June 2023, 12:30:27 UTC |
| b9a4efd | Jaroslav Kysela | 06 June 2023, 07:31:22 UTC | ALSA: ice1712,ice1724: fix the kcontrol->id initialization The new xarray lookup code requires to know complete kcontrol->id before snd_ctl_add() call. Reorder the code to make the initialization properly. Cc: stable@kernel.org # v5.19+ Reported-by: Martin Zidek <zidek@master.cz> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230606073122.597491-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de> | 06 June 2023, 07:43:55 UTC |
| da209f7 | Tim Crawford | 05 June 2023, 16:38:34 UTC | ALSA: hda/realtek: Add quirk for Clevo NS50AU Fixes headset detection on Clevo NS50AU. Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230605163834.24653-1-tcrawford@system76.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 June 2023, 17:12:42 UTC |
| 811dd42 | Stefan Binding | 05 June 2023, 15:33:08 UTC | ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41 Add support for Asus ROG 2024 models using CS35L41 SPI with Internal Boost. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230605153308.448550-1-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 June 2023, 16:04:47 UTC |
| 1a93f10 | Sayed, Karimuddin | 02 June 2023, 19:38:12 UTC | ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256 Add "Intel Reference boad" and "Intel NUC 13" SSID in the alc256. Enable jack headset volume buttons Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Sayed, Karimuddin <karimuddin.sayed@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230602193812.66768-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 June 2023, 07:48:55 UTC |
| 7ca4c8d | RenHai | 02 June 2023, 00:36:04 UTC | ALSA: hda/realtek: Add Lenovo P3 Tower platform Headset microphone on this platform does not work without ALC897_FIXUP_HEADSET_MIC_PIN fixup. Signed-off-by: RenHai <kean0048@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230602003604.975892-1-kean0048@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 June 2023, 07:48:10 UTC |
| 527c356 | Ai Chao | 26 May 2023, 09:47:04 UTC | ALSA: hda/realtek: Add a quirk for HP Slim Desktop S01 Add a quirk for HP Slim Desktop S01 to fixup headset MIC no presence. Signed-off-by: Ai Chao <aichao@kylinos.cn> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230526094704.14597-1-aichao@kylinos.cn Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 June 2023, 07:32:13 UTC |
| bd57488 | Mirsad Goran Todorovac | 24 May 2023, 19:15:29 UTC | selftests: alsa: pcm-test: Fix compiler warnings about the format GCC 11.3.0 issues warnings in this module about wrong sizes of format specifiers: pcm-test.c: In function ‘test_pcm_time’: pcm-test.c:384:68: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 \ has type ‘unsigned int’ [-Wformat=] 384 | snprintf(msg, sizeof(msg), "rate mismatch %ld != %ld", rate, rrate); pcm-test.c:455:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \ type ‘long int’ [-Wformat=] 455 | "expected %d, wrote %li", rate, frames); pcm-test.c:462:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \ type ‘long int’ [-Wformat=] 462 | "expected %d, wrote %li", rate, frames); pcm-test.c:467:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \ type ‘long int’ [-Wformat=] 467 | "expected %d, wrote %li", rate, frames); Simple fix according to compiler's suggestion removed the warnings. Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230524191528.13203-1-mirsad.todorovac@alu.unizg.hr Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 June 2023, 07:15:42 UTC |
| 32cf004 | Chancel Liu | 30 May 2023, 10:30:12 UTC | ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted There's an issue on SAI synchronous mode that TX/RX side can't get BCLK from RX/TX it sync with if BYP bit is asserted. It's a workaround to fix it that enable SION of IOMUX pad control and assert BCI. For example if TX sync with RX which means both TX and RX are using clk form RX and BYP=1. TX can get BCLK only if the following two conditions are valid: 1. SION of RX BCLK IOMUX pad is set to 1 2. BCI of TX is set to 1 Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> | 02 June 2023, 11:54:07 UTC |
| 635071f | Robert Hancock | 02 June 2023, 01:19:35 UTC | ASoC: simple-card-utils: fix PCM constraint error check The code in asoc_simple_startup was treating any non-zero return from snd_pcm_hw_constraint_minmax as an error, when this can return 1 in some normal cases and only negative values indicate an error. When this happened, it caused asoc_simple_startup to disable the clocks it just enabled and return 1, which was not treated as an error by the calling code which only checks for negative return values. Then when the PCM is eventually shut down, it causes the clock framework to complain about disabling clocks that were not enabled. Fix the check for snd_pcm_hw_constraint_minmax return value to only treat negative values as an error. Fixes: 5ca2ab459817 ("ASoC: simple-card-utils: Add new system-clock-fixed flag") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20230602011936.231931-1-robert.hancock@calian.com Signed-off-by: Mark Brown <broonie@kernel.org> | 02 June 2023, 11:54:06 UTC |
| ce78930 | Mark Brown | 01 June 2023, 15:43:38 UTC | ASoC: mediatek: fix use-after-free in driver remove Merge series from Trevor Wu <trevor.wu@mediatek.com>: These patches concern modifications made in mt8186[1]. The clock unregistration mechanism used in mt8188 and mt8195 is similar with mt8186, resulting in the same problem existing within the driver. Therefore, the solution has also been applied to these two platforms. [1] https://lore.kernel.org/all/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid/ | 01 June 2023, 15:43:38 UTC |
| 524306c | Richard Fitzgerald | 01 June 2023, 12:49:07 UTC | ASoC: cs35l56: Remove NULL check from cs35l56_sdw_dai_set_stream() The dma pointer must be set to the passed stream pointer, even if that pointer is NULL. Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230601124907.3128170-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> | 01 June 2023, 13:11:51 UTC |
| 3a67ad1 | Ryan Lee | 01 June 2023, 13:06:00 UTC | ASoC: max98363: limit the number of channel to 1 MAX98363 is a mono amplifier. The number of channel needs to be always 1. Signed-off-by: Ryan Lee <ryans.lee@analog.com> Link: https://lore.kernel.org/r/20230601130600.25344-2-ryan.lee.analog@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> | 01 June 2023, 13:11:50 UTC |
| 0e2ee34 | Ryan Lee | 01 June 2023, 13:05:59 UTC | ASoC: max98363: Removed 32bit support MAX98363 does not support 32bit depth audio. Removed 32bit from the supported format list. Instead, added 16bit and 24bit to the list. Signed-off-by: Ryan Lee <ryans.lee@analog.com> Link: https://lore.kernel.org/r/20230601130600.25344-1-ryan.lee.analog@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> | 01 June 2023, 13:11:49 UTC |
| dc93f0d | Trevor Wu | 01 June 2023, 03:33:18 UTC | ASoC: mediatek: mt8195: fix use-after-free in driver remove path During mt8195_afe_init_clock(), mt8195_audsys_clk_register() was called followed by several other devm functions. At mt8195_afe_deinit_clock() located at mt8195_afe_pcm_dev_remove(), mt8195_audsys_clk_unregister() was called. However, there was an issue with the order in which these functions were called. Specifically, the remove callback of platform_driver was called before devres released the resource, resulting in a use-after-free issue during remove time. At probe time, the order of calls was: 1. mt8195_audsys_clk_register 2. afe_priv->clk = devm_kcalloc 3. afe_priv->clk[i] = devm_clk_get At remove time, the order of calls was: 1. mt8195_audsys_clk_unregister 3. free afe_priv->clk[i] 2. free afe_priv->clk To resolve the problem, we can utilize devm_add_action_or_reset() in mt8195_audsys_clk_register() so that the remove order can be changed to 3->2->1. Fixes: 6746cc858259 ("ASoC: mediatek: mt8195: add platform driver") Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230601033318.10408-3-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org> | 01 June 2023, 11:30:36 UTC |
| fd67a7a | Trevor Wu | 01 June 2023, 03:33:17 UTC | ASoC: mediatek: mt8188: fix use-after-free in driver remove path During mt8188_afe_init_clock(), mt8188_audsys_clk_register() was called followed by several other devm functions. The caller of mt8188_afe_init_clock() utilized devm_add_action_or_reset() to call mt8188_afe_deinit_clock(). However, the order was incorrect, causing a use-after-free issue during remove time. At probe time, the order of calls was: 1. mt8188_audsys_clk_register 2. afe_priv->clk = devm_kcalloc 3. afe_priv->clk[i] = devm_clk_get At remove time, the order of calls was: 1. mt8188_audsys_clk_unregister 3. free afe_priv->clk[i] 2. free afe_priv->clk To resolve the problem, it's necessary to move devm_add_action_or_reset() to the appropriate position so that the remove order can be 3->2->1. Fixes: f6b026479b13 ("ASoC: mediatek: mt8188: support audio clock control") Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230601033318.10408-2-trevor.wu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org> | 01 June 2023, 11:30:35 UTC |
| 57d1e89 | Sicong Jiang | 31 May 2023, 09:06:35 UTC | ASoC: amd: yc: Add Thinkpad Neo14 to quirks list for acp6x Thinkpad Neo14 Ryzen Edition uses Ryzen 6800H processor, and adding to quirks list for acp6x will enable internal mic. Signed-off-by: Sicong Jiang <kevin.jiangsc@gmail.com> Link: https://lore.kernel.org/r/20230531090635.89565-1-kevin.jiangsc@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> | 31 May 2023, 11:24:59 UTC |
| e384dba | Edson Juliano Drosdeck | 29 May 2023, 18:19:11 UTC | ASoC: nau8824: Add quirk to active-high jack-detect Add entries for Positivo laptops: CW14Q01P, K1424G, N14ZP74G to the DMI table, so that active-high jack-detect will work properly on these laptops. Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com> Link: https://lore.kernel.org/r/20230529181911.632851-1-edson.drosdeck@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> | 30 May 2023, 12:43:28 UTC |
| b6b5c64 | Vijendar Mukunda | 25 May 2023, 11:29:55 UTC | ASoC: amd: ps: fix for acp_lock access in pdm driver Sending the mutex address(acp_lock) as platform data during ACP PDM platform driver register sequence, its creating copy of the platform data. Referencing this platform data in ACP PDM driver results incorrect reference to the common lock usage. Instead of directly passing the lock address as platform data, retrieve it from parent driver data structure and use the same lock reference in ACP PDM driver. Fixes: 45aa83cb9388 ("ASoC: amd: ps: use acp_lock to protect common registers in pdm driver") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230525113000.1290758-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org> | 30 May 2023, 12:43:27 UTC |
| 8938f75 | Herve Codina | 23 May 2023, 15:12:22 UTC | ASoC: simple-card: Add missing of_node_put() in case of error In the error path, a of_node_put() for platform is missing. Just add it. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20230523151223.109551-9-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> | 26 May 2023, 15:35:26 UTC |
| 4ca110c | Bin Li | 24 May 2023, 11:37:55 UTC | ALSA: hda/realtek: Enable headset onLenovo M70/M90 Lenovo M70/M90 Gen4 are equipped with ALC897, and they need ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work. The previous quirk for M70/M90 is for Gen3. Signed-off-by: Bin Li <bin.li@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 24 May 2023, 12:18:59 UTC |
| 2d7c2f9 | Srinivas Kandagatla | 23 May 2023, 16:54:14 UTC | ASoC: codecs: wcd938x-sdw: do not set can_multi_write flag regmap-sdw does not support multi register writes, so there is no point in setting this flag. This also leads to incorrect programming of WSA codecs with regmap_multi_reg_write() call. This invalid configuration should have been rejected by regmap-sdw. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523165414.14560-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> | 24 May 2023, 10:20:09 UTC |
| 6e7a6d4 | Srinivas Kandagatla | 23 May 2023, 15:46:05 UTC | ASoC: codecs: wsa881x: do not set can_multi_write flag regmap-sdw does not support multi register writes, so there is no point in setting this flag. This also leads to incorrect programming of WSA codecs with regmap_multi_reg_write() call. This invalid configuration should have been rejected by regmap-sdw. Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523154605.4284-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> | 24 May 2023, 10:20:08 UTC |
| 40ba041 | Srinivas Kandagatla | 23 May 2023, 15:46:04 UTC | ASoC: codecs: wsa883x: do not set can_multi_write flag regmap-sdw does not support multi register writes, so there is no point in setting this flag. This also leads to incorrect programming of WSA codecs with regmap_multi_reg_write() call. This invalid configuration should have been rejected by regmap-sdw. Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523154605.4284-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> | 24 May 2023, 10:20:07 UTC |
| bac4d82 | Takashi Iwai | 24 May 2023, 10:14:24 UTC | Merge tag 'asoc-fix-v6.4-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.4 A collection of fixes for v6.4, mostly driver specific but there's also one fix for DPCM to avoid incorrectly repeated calls to prepare() which can trigger issues on some systems. | 24 May 2023, 10:14:24 UTC |
| 011a871 | Maxim Kochetkov | 12 May 2023, 11:03:42 UTC | ASoC: dwc: move DMA init to snd_soc_dai_driver probe() When using DMA mode we are facing with Oops: [ 396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address 000000000000000c [ 396.469374] Oops [#1] [ 396.471839] Modules linked in: [ 396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty #68 [ 396.483619] Hardware name: YMP ELCT FPGA (DT) [ 396.488156] epc : dmaengine_pcm_open+0x1d2/0x342 [ 396.493227] ra : dmaengine_pcm_open+0x1d2/0x342 [ 396.498140] epc : ffffffff807fe346 ra : ffffffff807fe346 sp : ffffffc804e138f0 [ 396.505602] gp : ffffffff817bf730 tp : ffffffd8042c8ac0 t0 : 6500000000000000 [ 396.513045] t1 : 0000000000000064 t2 : 656e69676e65616d s0 : ffffffc804e13990 [ 396.520477] s1 : ffffffd801b86a18 a0 : 0000000000000026 a1 : ffffffff816920f8 [ 396.527897] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 396.535319] a5 : 0000000000000000 a6 : ffffffd801b87040 a7 : 0000000000000038 [ 396.542740] s2 : ffffffd801b94a00 s3 : 0000000000000000 s4 : ffffffd80427f5e8 [ 396.550153] s5 : ffffffd80427f5e8 s6 : ffffffd801b44410 s7 : fffffffffffffff5 [ 396.557569] s8 : 0000000000000800 s9 : 0000000000000001 s10: ffffffff8066d254 [ 396.564978] s11: ffffffd8059cf768 t3 : ffffffff817d5577 t4 : ffffffff817d5577 [ 396.572391] t5 : ffffffff817d5578 t6 : ffffffc804e136e8 [ 396.577876] status: 0000000200000120 badaddr: 000000000000000c cause: 000000000000000d [ 396.586007] [<ffffffff806839f4>] snd_soc_component_open+0x1a/0x68 [ 396.592439] [<ffffffff807fdd62>] __soc_pcm_open+0xf0/0x502 [ 396.598217] [<ffffffff80685d86>] soc_pcm_open+0x2e/0x4e [ 396.603741] [<ffffffff8066cea4>] snd_pcm_open_substream+0x442/0x68e [ 396.610313] [<ffffffff8066d1ea>] snd_pcm_open+0xfa/0x212 [ 396.615868] [<ffffffff8066d39c>] snd_pcm_capture_open+0x3a/0x60 [ 396.622048] [<ffffffff8065b35a>] snd_open+0xa8/0x17a [ 396.627421] [<ffffffff801ae036>] chrdev_open+0xa0/0x218 [ 396.632893] [<ffffffff801a5a28>] do_dentry_open+0x17c/0x2a6 [ 396.638713] [<ffffffff801a6d9a>] vfs_open+0x1e/0x26 [ 396.643850] [<ffffffff801b8544>] path_openat+0x96e/0xc96 [ 396.649518] [<ffffffff801b9390>] do_filp_open+0x7c/0xf6 [ 396.655034] [<ffffffff801a6ff2>] do_sys_openat2+0x8a/0x11e [ 396.660765] [<ffffffff801a735a>] sys_openat+0x50/0x7c [ 396.666068] [<ffffffff80003aca>] ret_from_syscall+0x0/0x2 [ 396.674964] ---[ end trace 0000000000000000 ]--- It happens because of play_dma_data/capture_dma_data pointers are NULL. Current implementation assigns these pointers at snd_soc_dai_driver startup() callback and reset them back to NULL at shutdown(). But soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open() before snd_soc_dai_driver startup(). Most generic DMA capable I2S drivers use snd_soc_dai_driver probe() callback to init DMA pointers only once at probe. So move DMA init to dw_i2s_dai_probe and drop shutdown() and startup() callbacks. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20230512110343.66664-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org> | 23 May 2023, 20:39:30 UTC |
| e2d035f | Stefan Binding | 14 April 2023, 15:25:51 UTC | ASoC: cs35l41: Fix default regmap values for some registers Several values do not match the defaults of CS35L41, fix them. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230414152552.574502-4-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> | 23 May 2023, 18:10:45 UTC |
| 240ca95 | Mark Brown | 22 May 2023, 14:48:41 UTC | ASoC: Intel: Fixes Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: Series of fixes for issues found during development and testing, primarly for avs driver. | 22 May 2023, 14:48:41 UTC |
| 81302b1 | Takashi Iwai | 18 May 2023, 11:35:20 UTC | ALSA: hda: Fix unhandled register update during auto-suspend period It's reported that the recording started right after the driver probe doesn't work properly, and it turned out that this is related with the codec auto-suspend. Namely, after the probe phase, the usage count goes zero, and the auto-suspend is programmed, but the codec is kept still active until the auto-suspend expiration. When an application (e.g. alsactl) updates the mixer values at this moment, the values are cached but not actually written. Then, starting arecord thereafter also results in the silence because of the missing unmute. The root cause is the handling of "lazy update" mode; when a mixer value is updated *after* the suspend, it should update only the cache and exits. At the resume, the cached value is written to the device, in turn. The problem is that the current code misinterprets the state of auto-suspend as if it were already suspended. Although we can add the check of the actual device state after pm_runtime_get_if_in_use() for catching the missing state, this won't suffice; the second call of regmap_update_bits_check() will skip writing the register because the cache has been already updated by the first call. So we'd need fixes in two different places. OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with pm_runtime_get_if_active() (with ign_usage_count=true). This change implies that the driver takes the pm refcount if the device is still in ACTIVE state and continues the processing. A small caveat is that this will leave the auto-suspend timer. But, since the timer callback itself checks the device state and aborts gracefully when it's active, this won't be any substantial problem. Long story short: we address the missing register-write problem just by replacing the pm_runtime_*() call in snd_hda_keep_power_up(). Fixes: fc4f000bf8c0 ("ALSA: hda - Fix unexpected resume through regmap code path") Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 May 2023, 12:20:29 UTC |
| 3a2e3fa | David Epping | 19 May 2023, 11:05:53 UTC | ASoC: dt-bindings: tlv320aic32x4: Fix supply names The term "-supply" is a suffix to regulator names. Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Link: https://lore.kernel.org/r/20230519110545.GA18663@nucnuc.mle Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:31 UTC |
| 25148f5 | Amadeusz Sławiński | 19 May 2023, 20:17:11 UTC | ASoC: Intel: avs: Add missing checks on FE startup Constraint functions have return values, they should be checked for potential errors. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-8-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:26 UTC |
| 320f4d8 | Amadeusz Sławiński | 19 May 2023, 20:17:10 UTC | ASoC: Intel: avs: Fix avs_path_module::instance_id size All IPCs using instance_id use 8 bit value. Original commit used 16 bit value because FW reports possible max value in 16 bit field, but in practice FW limits the value to 8 bits. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-7-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:25 UTC |
| 8368551 | Cezary Rojewski | 19 May 2023, 20:17:09 UTC | ASoC: Intel: avs: Account for UID of ACPI device Configurations with multiple codecs attached to the platform are supported but only if each from the set is different. Add new field representing the 'Unique ID' so that codecs that share Vendor and Part IDs can be differentiated and thus enabling support for such configurations. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:24 UTC |
| 1cf036d | Cezary Rojewski | 19 May 2023, 20:17:08 UTC | ASoC: Intel: avs: Fix declaration of enum avs_channel_config Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is reserved for 'C7_1' instead. Fixes: 580a5912d1fe ("ASoC: Intel: avs: Declare module configuration types") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-5-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:23 UTC |
| 9510965 | Cezary Rojewski | 19 May 2023, 20:17:07 UTC | ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is reserved for 'C7_1' instead. Fixes: 04afbbbb1cba ("ASoC: Intel: Skylake: Update the topology interface structure") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-4-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:22 UTC |
| d849996 | Amadeusz Sławiński | 19 May 2023, 20:17:06 UTC | ASoC: Intel: avs: Access path components under lock Path and its components should be accessed under lock to prevent problems with one thread modifying them while other tries to read. Fixes: c8c960c10971 ("ASoC: Intel: avs: APL-based platforms support") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-3-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:21 UTC |
| ff04437 | Amadeusz Sławiński | 19 May 2023, 20:17:05 UTC | ASoC: Intel: avs: Fix module lookup When changing value of kcontrol, FW module to which data should be send needs to be found. Currently it is done in improper way, fix it. Change function name to indicate that it looks only for volume module. This allows to change volume during runtime, instead of only changing init value. Fixes: be2b81b519d7 ("ASoC: Intel: avs: Parse control tuples") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> | 22 May 2023, 10:18:20 UTC |
| 7843380 | Adam Stylinski | 21 May 2023, 14:52:23 UTC | ALSA: hda/ca0132: add quirk for EVGA X299 DARK This quirk is necessary for surround and other DSP effects to work with the onboard ca0132 based audio chipset for the EVGA X299 dark mainboard. Signed-off-by: Adam Stylinski <kungfujesus06@gmail.com> Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=67071 Link: https://lore.kernel.org/r/ZGopOe19T1QOwizS@eggsbenedict.adamsnet Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 May 2023, 06:26:01 UTC |
| e123036 | Ranjani Sridharan | 17 May 2023, 18:57:31 UTC | ASoC: soc-pcm: test if a BE can be prepared In the BE hw_params configuration, the existing code checks if any of the existing FEs are prepared, running, paused or suspended - and skips the configuration in those cases. This allows multiple calls of hw_params which the ALSA state machine supports. This check is not handled for the prepare stage, which can lead to the same BE being prepared multiple times. This patch adds a check similar to that of the hw_params, with the main difference being that the suspended state is allowed: the ALSA state machine allows a transition from suspended to prepared with hw_params skipped. This problem was detected on Intel IPC4/SoundWire devices, where the BE dailink .prepare stage is used to configure the SoundWire stream with a bank switch. Multiple .prepare calls lead to conflicts with the .trigger operation with IPC4 configurations. This problem was not detected earlier on Intel devices, HDaudio BE dailinks detect that the link is already prepared and skip the configuration, and for IPC3 devices there is no BE trigger. Link: https://github.com/thesofproject/sof/issues/7596 Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230517185731.487124-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 18 May 2023, 17:31:14 UTC |
| dc4f2cc | Nikhil Mahale | 17 May 2023, 09:07:36 UTC | ALSA: hda: Add NVIDIA codec IDs a3 through a7 to patch table These IDs are for AD102, AD103, AD104, AD106, and AD107 gpus with audio functions that are largely similar to the existing ones. Tested audio using gnome-settings, over HDMI, DP-SST and DP-MST connections on AD106 gpu. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230517090736.15088-1-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 17 May 2023, 14:57:43 UTC |
| 040b5a0 | Arnd Bergmann | 16 May 2023, 19:50:42 UTC | ALSA: oss: avoid missing-prototype warnings Two functions are defined and used in pcm_oss.c but also optionally used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS is disabled, this causes a warning as the functions are not static and have no prototype: sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes] sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes] Avoid this by making the prototypes unconditional. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230516195046.550584-2-arnd@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> | 17 May 2023, 14:56:09 UTC |
| ccecefa | Arnd Bergmann | 16 May 2023, 19:50:41 UTC | ALSA: cs46xx: mark snd_cs46xx_download_image as static snd_cs46xx_download_image() was originally called from dsp_spos.c, but is now local to cs46xx_lib.c. Mark it as 'static' to avoid a warning about it lacking a declaration, and '__maybe_unused' to avoid a warning about it being unused when CONFIG_SND_CS46XX_NEW_DSP is disabled: sound/pci/cs46xx/cs46xx_lib.c:534:5: error: no previous prototype for 'snd_cs46xx_download_image' Fixes: 89f157d9e6bf ("[ALSA] cs46xx - Fix PM resume") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230516195046.550584-1-arnd@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> | 17 May 2023, 14:56:00 UTC |
| 8b27137 | Matthias Kaehlcke | 16 May 2023, 16:46:30 UTC | ASoC: rt5682: Disable jack detection interrupt during suspend The rt5682 driver switches its regmap to cache-only when the device suspends and back to regular mode on resume. When the jack detect interrupt fires rt5682_irq() schedules the jack detect work. This can result in invalid reads from the regmap in cache-only mode if the work runs before the device has resumed: [ 56.245502] rt5682 9-001a: ASoC: error at soc_component_read_no_lock on rt5682.9-001a for register: [0x000000f0] -16 Disable the jack detection interrupt during suspend and re-enable it on resume. The driver already schedules the jack detection work on resume, so any state change during suspend is still handled. This is essentially the same as commit f7d00a9be147 ("SoC: rt5682s: Disable jack detection interrupt during suspend") for the rt5682s. Cc: stable@kernel.org Signed-off-by: Matthias Kaehlcke <mka@chromium.org Reviewed-by: Douglas Anderson <dianders@chromium.org Reviewed-by: Stephen Boyd <swboyd@chromium.org Link: https://lore.kernel.org/r/20230516164629.1.Ibf79e94b3442eecc0054d2b478779cc512d967fc@changeid Signed-off-by: Mark Brown <broonie@kernel.org | 17 May 2023, 01:48:07 UTC |
| 75e5fab | Ravulapati Vishnu Vardhan Rao | 11 May 2023, 11:25:32 UTC | ASoC: lpass: Fix for KASAN use_after_free out of bounds When we run syzkaller we get below Out of Bounds error. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110 Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144 CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G W Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT) Call trace: dump_backtrace+0x0/0x4ec show_stack+0x34/0x50 dump_stack_lvl+0xdc/0x11c print_address_description+0x30/0x2d8 kasan_report+0x178/0x1e4 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf8/0x5a0 _regmap_read+0x45c/0x86c _regmap_update_bits+0x128/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_put_dec_enum+0x1d0/0x268 snd_ctl_elem_write+0x288/0x474 By Error checking and checking valid values issue gets rectifies. Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com Link: https://lore.kernel.org/r/20230511112532.16106-1-quic_visr@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org | 17 May 2023, 01:48:06 UTC |
| 3b44ec8 | Takashi Iwai | 16 May 2023, 18:44:12 UTC | ALSA: hda: Fix Oops by 9.1 surround channel names get_line_out_pfx() may trigger an Oops by overflowing the static array with more than 8 channels. This was reported for MacBookPro 12,1 with Cirrus codec. As a workaround, extend for the 9.1 channels and also fix the potential Oops by unifying the code paths accessing the same array with the proper size check. Reported-by: Olliver Schinagl <oliver@schinagl.nl> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 May 2023, 18:44:46 UTC |
| cc638db | Takashi Iwai | 16 May 2023, 18:11:50 UTC | Merge tag 'asoc-fix-v6.4-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.4 More fixes that came in since the merge window, the bulk of which are for the SOF code, I suspect as a result of the wide usage, active development and large code size rather than huge quality problems. There's also a couple of MAINTAINERS updates and some new device quirks. | 16 May 2023, 18:11:50 UTC |
| 9be0b3a | Mark Brown | 15 May 2023, 15:13:09 UTC | ASoC: SOF: Intel: hda-mlink: fixes and extensions Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: With additional testing with multiple links and multiple DAI types, we found a couple of mistakes with refcounts, base address, missing initialization. A new helper was also added due to a change in the SoundWire programming sequences, with the host driver in charge of setting up the DMA channel mapping instead of the firmware. | 15 May 2023, 15:13:09 UTC |
| 1c0d023 | Ranjani Sridharan | 15 May 2023, 08:52:00 UTC | ASoC: SOF: topology: Fix tuples array allocation The memory allocated for the tuples array assumes that there's 1 instance of all tokens already. So for those tokens that have multiple instances in topology, we need to exclude the initial instance that has already been accounted for. Fixes: 4fdef47a44d6 ("ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count") Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230515085200.17094-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 11:10:18 UTC |
| be3c215 | Ranjani Sridharan | 15 May 2023, 10:44:03 UTC | ASoC: SOF: Separate the tokens for input and output pin index Using the same token ID for both input and output format pin index results in collisions and incorrect pin index getting parsed from topology. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230515104403.32207-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 11:10:17 UTC |
| aa70f36 | Mark Brown | 15 May 2023, 11:08:26 UTC | ASoC: SOF: Various runtime pm fixes, improvements Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Three patch to correct error path PM runtime handling in few places. Regards, Peter --- Pierre-Louis Bossart (3): ASoC: SOF: debug: conditionally bump runtime_pm counter on exceptions ASoC: SOF: pcm: fix pm_runtime imbalance in error handling ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling sound/soc/sof/debug.c | 4 ++-- sound/soc/sof/pcm.c | 11 ++++++----- sound/soc/sof/sof-client-probes.c | 14 ++++++++------ 3 files changed, 16 insertions(+), 13 deletions(-) -- 2.40.1 | 15 May 2023, 11:08:26 UTC |
| dc60b67 | Lucas Tanure | 12 May 2023, 15:45:03 UTC | MAINTAINERS: Remove self from Cirrus Codec drivers I'm leaving Cirrus Logic, and will no longer have access to hardware and documentation necessary to be effective in a maintainership role. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com Link: https://lore.kernel.org/r/20230512154503.741718-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:35:30 UTC |
| 17082e0 | Simon Trimmer | 12 May 2023, 14:42:37 UTC | ASoC: cs35l56: Prevent unbalanced pm_runtime in dsp_work() on SoundWire Flush the SoundWire interrupt handler work instead of cancelling it. When a SoundWire interrupt is triggered the pm_runtime is held until the work has completed. It's therefore unsafe to cancel the work, it must be flushed. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com Link: https://lore.kernel.org/r/20230512144237.739000-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:35:12 UTC |
| 41c5305 | Ranjani Sridharan | 12 May 2023, 11:46:30 UTC | ASoC: SOF: topology: Fix logic for copying tuples Topology could have more instances of the tokens being searched for than the number of sets that need to be copied. Stop copying token after the limit of number of token instances has been reached. This worked before only by chance as we had allocated more size for the tuples array than the number of actual tokens being parsed. Fixes: 7006d20e5e9d ("ASoC: SOF: Introduce IPC3 ops") Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512114630.24439-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:21:15 UTC |
| 171b53b | Kai Vehmanen | 12 May 2023, 10:46:38 UTC | ASoC: SOF: pm: save io region state in case of errors in resume If there are failures in DSP runtime resume, the device state will not reach active and this makes it impossible e.g. to retrieve a possible DSP panic dump via "exception" debugfs node. If CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y is set, the data in cache is stale. If debugfs cache is not used, the region simply cannot be read. To allow debugging these scenarios, update the debugfs cache contents in resume error handler. User-space can then later retrieve DSP panic and other state via debugfs (requires SOF debugfs cache to be enabled in build). Reported-by: Curtis Malainey <cujomalainey@chromium.org Link: https://github.com/thesofproject/linux/issues/4274 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Curtis Malainey <cujomalainey@chromium.org Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512104638.21376-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:21:14 UTC |
| 647b5f5 | Krzysztof Kozlowski | 13 May 2023, 09:02:28 UTC | ASoC: MAINTAINERS: drop Krzysztof Kozlowski from Samsung audio Remove Krzysztof Kozlowski from maintainer of Samsung SoC Audio drivers and change the status to maintenance (no one is reality being paid for looking at this). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com Link: https://lore.kernel.org/r/20230513090228.4340-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:21:13 UTC |
| a93d2af | Douglas Anderson | 11 May 2023, 16:25:12 UTC | ASoC: mediatek: mt8186: Fix use-after-free in driver remove path When devm runs function in the "remove" path for a device it runs them in the reverse order. That means that if you have parts of your driver that aren't using devm or are using "roll your own" devm w/ devm_add_action_or_reset() you need to keep that in mind. The mt8186 audio driver didn't quite get this right. Specifically, in mt8186_init_clock() it called mt8186_audsys_clk_register() and then went on to call a bunch of other devm function. The caller of mt8186_init_clock() used devm_add_action_or_reset() to call mt8186_deinit_clock() but, because of the intervening devm functions, the order was wrong. Specifically at probe time, the order was: 1. mt8186_audsys_clk_register() 2. afe_priv->clk = devm_kcalloc(...) 3. afe_priv->clk[i] = devm_clk_get(...) At remove time, the order (which should have been 3, 2, 1) was: 1. mt8186_audsys_clk_unregister() 3. Free all of afe_priv->clk[i] 2. Free afe_priv->clk The above seemed to be causing a use-after-free. Luckily, it's easy to fix this by simply using devm more correctly. Let's move the devm_add_action_or_reset() to the right place. In addition to fixing the use-after-free, code inspection shows that this fixes a leak (missing call to mt8186_audsys_clk_unregister()) that would have happened if any of the syscon_regmap_lookup_by_phandle() calls in mt8186_init_clock() had failed. Fixes: 55b423d5623c ("ASoC: mediatek: mt8186: support audio clock control in platform driver") Signed-off-by: Douglas Anderson <dianders@chromium.org Link: https://lore.kernel.org/r/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:21:13 UTC |
| 4708449 | Peter Ujfalusi | 12 May 2023, 11:03:17 UTC | ASoC: SOF: ipc3-topology: Make sure that only one cmd is sent in dai_config The commands in sof_ipc_dai_config.flags are encoded as bits: 1 (bit0) - hw_params 2 (bit1) - hw_free 4 (bit2) - pause These are commands, they cannot be combined as one would assume, for example 3 (bit0 | bit1) is invalid. This can happen right at the second start of a stream as at the end of the first stream we set the hw_free command (bit1) and on the second start we would OR on top of it the hw_params (bit0). Fixes: b66bfc3a9810 ("ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230512110317.5180-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:21:12 UTC |
| bc42427 | Pierre-Louis Bossart | 12 May 2023, 10:33:15 UTC | ASoC: SOF: sof-client-probes: fix pm_runtime imbalance in error handling When an error occurs, we need to make sure the device can pm_runtime suspend instead of keeping it active. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:59 UTC |
| da0fe8f | Pierre-Louis Bossart | 12 May 2023, 10:33:14 UTC | ASoC: SOF: pcm: fix pm_runtime imbalance in error handling When an error occurs, we need to make sure the device can pm_runtime suspend instead of keeping it active. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:58 UTC |
| 3de9758 | Pierre-Louis Bossart | 12 May 2023, 10:33:13 UTC | ASoC: SOF: debug: conditionally bump runtime_pm counter on exceptions When a firmware IPC error happens during a pm_runtime suspend, we ignore the error and suspend anyways. However, the code unconditionally increases the runtime_pm counter. This results in a confusing configuration where the code will suspend, resume but never suspend again due to the use of pm_runtime_get_noresume(). The intent of the counter increase was to prevent entry in D3, but if that transition to D3 is already started it cannot be stopped. In addition, there's no point in that case in trying to prevent anything, the firmware error is handled and the next resume will re-initialize the firmware completely. This patch changes the logic to prevent suspend when the device is pm_runtime active and has a use_count > 0. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:57 UTC |
| ccc2f0c | Pierre-Louis Bossart | 12 May 2023, 17:46:11 UTC | ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers These registers enable the HDaudio DMA hardware to split/merge data from different PDIs, possibly on different links. This capability exists for all types of HDaudio extended links, but for now is only required for SoundWire. In the SSP/DMIC case, the IP is programmed by the DSP firmware. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:14 UTC |
| 9643456 | Pierre-Louis Bossart | 12 May 2023, 17:46:10 UTC | ASoC: SOF: Intel: hda-mlink: initialize instance_offset member We defined the values but never initialized it for SoundWire/SSP, fix this miss. A Fixes: tag is not provided as instance_offset was not used so far, so nothing was really broken. This patch is only required for the SoundWire support in the following patch. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:13 UTC |
| 7dfd1cc | Pierre-Louis Bossart | 12 May 2023, 17:46:09 UTC | ASoC: SOF: Intel: hda-mlink: use 'ml_addr' parameter consistently We mix the use of hlink->ml_addr and the 'ml_addr' parameter. It's the same thing, let's align on using the parameter. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:12 UTC |
| af8c32b | Pierre-Louis Bossart | 12 May 2023, 17:46:08 UTC | ASoC: SOF: Intel: hda-mlink: fix base_ptr computation The base_ptr value needs to be derived from the remap_addr pointer, not the ml_addr. This base_ptr was used only in debug logs that were so far not contributed upstream so the issue was not detected. It needs to be fixed for SoundWire support on LunarLake. Fixes: 17c9b6ec35c0 ("ASoC: SOF: Intel: hda-mlink: add structures to parse ALT links") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:11 UTC |
| dcb88fc | Pierre-Louis Bossart | 12 May 2023, 17:46:07 UTC | ASoC: SOF: Intel: hda-mlink: add helper to get SoundWire hlink Same functionality as for DMIC/SSP with different ID. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Rander Wang <rander.wang@intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:10 UTC |
| 7430dea | Pierre-Louis Bossart | 12 May 2023, 17:46:06 UTC | ASoC: SOF: Intel: hda-mlink: fix sublink refcounting In hindsight it was a very bad idea to use the same refcount for Extended and 'legacy' HDaudio multi-links. The existing solution only powers-up the first sublink, which causes SoundWire and SSP tests to fail when more than one DAI is used concurrently. Solving this problem requires per-sublink refcounting, as suggested in this patch. The existing refcounting remains for 'legacy' HdAudio links, mainly to avoid changing the obscure programming sequence in snd_hdac_ext_bus_link_put(). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20230512174611.84372-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org | 15 May 2023, 01:20:09 UTC |
| 9dc68a4 | Kai-Heng Feng | 12 May 2023, 08:34:16 UTC | ALSA: hda/realtek: Fix mute and micmute LEDs for yet another HP laptop There's yet another laptop that needs the fixup to enable mute and micmute LEDs. So do it accordingly. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230512083417.157127-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 May 2023, 09:04:44 UTC |
| 92553ee | Ryan C. Underwood | 11 May 2023, 17:32:21 UTC | ALSA: hda/realtek: Apply HP B&O top speaker profile to Pavilion 15 The Pavilion 15 line has B&O top speakers similar to the x360 and applying the same profile produces good sound. Without this, the sound would be tinny and underpowered without either applying model=alc295-hp-x360 or booting another OS first. Signed-off-by: Ryan Underwood <nemesis@icequake.net> Fixes: 563785edfcef ("ALSA: hda/realtek - Add quirk entry for HP Pavilion 15") Link: https://lore.kernel.org/r/ZF0mpcMz3ezP9KQw@icequake.net Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 May 2023, 08:26:20 UTC |
| 359b431 | Takashi Iwai | 12 May 2023, 07:58:58 UTC | ALSA: usb-audio: Add a sample rate workaround for Line6 Pod Go Line6 Pod Go (0e41:424b) requires the similar workaround for the fixed 48k sample rate like other Line6 models. This patch adds the corresponding entry to line6_parse_audio_format_rate_quirk(). Reported-by: John Humlick <john@humlick.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230512075858.22813-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 May 2023, 08:19:55 UTC |
| c0e7205 | Dan Carpenter | 09 May 2023, 09:07:11 UTC | ALSA: firewire-digi00x: prevent potential use after free This code was supposed to return an error code if init_stream() failed, but it instead freed dg00x->rx_stream and returned success. This potentially leads to a use after free. Fixes: 9a08067ec318 ("ALSA: firewire-digi00x: support AMDTP domain") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/c224cbd5-d9e2-4cd4-9bcf-2138eb1d35c6@kili.mountain Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 May 2023, 08:18:05 UTC |
| f63550e | Paweł Anikiel | 08 May 2023, 11:30:37 UTC | ASoC: ssm2602: Add workaround for playback distortions Apply a workaround for what appears to be a hardware quirk. The problem seems to happen when enabling "whole chip power" (bit D7 register R6) for the very first time after the chip receives power. If either "output" (D4) or "DAC" (D3) aren't powered on at that time, playback becomes very distorted later on. This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10: https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229 I suspect this happens only when using an external MCLK signal (which is the case for both of these boards). Here are some experiments run on a Google Chameleon v3. These were run in userspace using a wrapper around the i2cset utility: ssmset() { i2cset -y 0 0x1a $(($1*2)) $2 } For each of the following sequences, we apply power to the ssm2603 chip, set the configuration registers R0-R5 and R7-R8, run the selected sequence, and check for distortions on playback. ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac OK ssmset 0x09 0x01 # core ssmset 0x06 0x87 # out, dac ssmset 0x06 0x07 # chip OK (disable MCLK) ssmset 0x09 0x01 # core ssmset 0x06 0x1f # chip ssmset 0x06 0x07 # out, dac (enable MCLK) OK ssmset 0x09 0x01 # core ssmset 0x06 0x1f # chip ssmset 0x06 0x07 # out, dac NOT OK ssmset 0x06 0x1f # chip ssmset 0x09 0x01 # core ssmset 0x06 0x07 # out, dac NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x0f # chip, out ssmset 0x06 0x07 # dac NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x17 # chip, dac ssmset 0x06 0x07 # out NOT OK For each of the following sequences, we apply power to the ssm2603 chip, run the selected sequence, issue a reset with R15, configure R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check for distortions. ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac OK (disable MCLK) ssmset 0x09 0x01 # core ssmset 0x06 0x07 # chip, out, dac (enable MCLK after reset) NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x17 # chip, dac NOT OK ssmset 0x09 0x01 # core ssmset 0x06 0x0f # chip, out NOT OK ssmset 0x06 0x07 # chip, out, dac NOT OK Signed-off-by: Paweł Anikiel <pan@semihalf.com Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com Signed-off-by: Mark Brown <broonie@kernel.org | 12 May 2023, 01:26:47 UTC |
| 4b963ae | Alexandru Sorodoc | 11 May 2023, 16:15:10 UTC | ALSA: hda/realtek: Add quirks for ASUS GU604V and GU603V These models use 2 CS35L41 amplifiers using SPI for down-facing speakers. alc285_fixup_speaker2_to_dac1 is needed to fix volume control of the down-facing speakers. Pin configs are needed to enable headset mic detection. Note that these models lack the ACPI _DSD properties needed to initialize the amplifiers. They can be added during boot to get working sound out of the speakers: https://gist.github.com/lamperez/862763881c0e1c812392b5574727f6ff Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com> Link: https://lore.kernel.org/r/20230511161510.315170-1-ealex95@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 11 May 2023, 16:59:34 UTC |
| 3e10f6c | Vitaly Rodionov | 10 May 2023, 14:22:27 UTC | ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops Add support for HP EliteBook 835/845/845W/865 G10 laptops with CS35L41 amplifiers on I2C/SPI bus connected to Realtek codec. Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230510142227.32945-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 11 May 2023, 16:02:41 UTC |
| efb2bfd | Martin Povišer | 09 May 2023, 15:34:12 UTC | ASoC: dt-bindings: Adjust #sound-dai-cells on TI's single-DAI codecs A bunch of TI's codecs have binding schemas which force #sound-dai-cells to one despite those codecs only having a single DAI. Allow for bindings with zero DAI cells and deprecate the former non-zero value. Signed-off-by: Martin Povišer <povik+lin@cutebit.org Link: https://lore.kernel.org/r/20230509153412.62847-1-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org | 11 May 2023, 01:17:59 UTC |
| ad721bc | Aidan MacDonald | 09 May 2023, 12:51:34 UTC | ASoC: jz4740-i2s: Make I2S divider calculations more robust When the CPU supplies bit/frame clocks, the system clock (clk_i2s) is divided to produce the bit clock. This is a simple 1/N divider with a fairly limited range, so for a given system clock frequency only a few sample rates can be produced. Usually a wider range of sample rates is supported by varying the system clock frequency. The old calculation method was not very robust and could easily produce the wrong clock rate, especially with non-standard rates. For example, if the system clock is 1.99x the target bit clock rate, the divider would be calculated as 1 instead of the more accurate 2. Instead, use a more accurate method that considers two adjacent divider settings and selects the one that produces the least error versus the requested rate. If the error is 5% or higher then the rate setting is rejected to prevent garbled audio. Skip divider calculation when the codec is supplying both the bit and frame clock; in that case, the divider outputs are unused and we don't want to constrain the sample rate. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com Link: https://lore.kernel.org/r/20230509125134.208129-1-aidanmacdonald.0x0@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org | 11 May 2023, 01:17:58 UTC |
| 051d71e | V sujith kumar Reddy | 08 May 2023, 07:05:08 UTC | ASoC: SOF: amd: Fix NULL pointer crash in acp_sof_ipc_msg_data function Check substream and runtime variables before assigning. Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com Link: https://lore.kernel.org/r/20230508070510.6100-1-Vsujithkumar.Reddy@amd.com Signed-off-by: Mark Brown <broonie@kernel.org | 09 May 2023, 05:43:33 UTC |
| 17955ab | Shengjiu Wang | 08 May 2023, 10:16:36 UTC | ASoC: fsl_micfil: Fix error handler with pm_runtime_enable There is error message when defer probe happens: fsl-micfil-dai 30ca0000.micfil: Unbalanced pm_runtime_enable! Fix the error handler with pm_runtime_enable and add fsl_micfil_remove() for pm_runtime_disable. Fixes: 47a70e6fc9a8 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com Link: https://lore.kernel.org/r/1683540996-6136-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org | 08 May 2023, 13:35:10 UTC |
| 90670ef | Ai Chao | 06 May 2023, 02:26:53 UTC | ALSA: hda/realtek: Add a quirk for HP EliteDesk 805 Add a quirk for HP EliteDesk 805 to fixup ALC3867 headset MIC no sound. Signed-off-by: Ai Chao <aichao@kylinos.cn> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230506022653.2074343-1-aichao@kylinos.cn Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 May 2023, 07:17:07 UTC |
| a4671b7 | Luke D. Jones | 05 May 2023, 23:58:24 UTC | ALSA: hda/realtek: Add quirk for 2nd ASUS GU603 Add quirk for GU603 with 0x1c62 variant of codec. Signed-off-by: Luke D. Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230505235824.49607-2-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 May 2023, 07:16:30 UTC |
| 0a6b36c | Jeremy Soller | 05 May 2023, 16:36:51 UTC | ALSA: hda/realtek: Add quirk for Clevo L140AU Fixes headset detection on Clevo L140AU. Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230505163651.21257-1-tcrawford@system76.com Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 May 2023, 07:15:49 UTC |
| ab6ecfb | Maxim Kochetkov | 05 May 2023, 06:28:20 UTC | ASoC: dwc: limit the number of overrun messages On slow CPU (FPGA/QEMU emulated) printing overrun messages from interrupt handler to uart console may leads to more overrun errors. So use dev_err_ratelimited to limit the number of error messages. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru Link: https://lore.kernel.org/r/20230505062820.21840-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org | 08 May 2023, 00:07:43 UTC |
| 7b9891a | Jeremy Soller | 05 May 2023, 16:14:58 UTC | ASoC: amd: yc: Add DMI entry to support System76 Pangolin 12 Add pang12 quirk to enable the internal microphone. Signed-off-by: Jeremy Soller <jeremy@system76.com Signed-off-by: Tim Crawford <tcrawford@system76.com Link: https://lore.kernel.org/r/20230505161458.19676-1-tcrawford@system76.com Signed-off-by: Mark Brown <broonie@kernel.org | 08 May 2023, 00:07:42 UTC |
| ac9a786 | Linus Torvalds | 07 May 2023, 20:34:35 UTC | Linux 6.4-rc1 | 07 May 2023, 20:34:35 UTC |
| f085df1 | Linus Torvalds | 07 May 2023, 18:32:18 UTC | Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2d482 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ... | 07 May 2023, 18:32:18 UTC |
| 17784de | Linus Torvalds | 07 May 2023, 18:04:26 UTC | Merge tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again) | 07 May 2023, 18:04:26 UTC |
| 6f69c98 | Linus Torvalds | 07 May 2023, 17:57:14 UTC | Merge tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs() | 07 May 2023, 17:57:14 UTC |
| 63342b1 | Linus Torvalds | 07 May 2023, 17:46:21 UTC | Merge tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "smb3 client fixes, mostly DFS or reconnect related: - Two DFS connection sharing fixes - DFS refresh fix - Reconnect fix - Two potential use after free fixes - Also print prefix patch in mount debug msg - Two small cleanup fixes" * tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unneeded semicolon cifs: fix sharing of DFS connections cifs: avoid potential races when handling multiple dfs tcons cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath cifs: fix potential race when tree connecting ipc cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname cifs: print smb3_fs_context::source when mounting cifs: protect session status check in smb2_reconnect() SMB3.1.1: correct definition for app_instance_id create contexts | 07 May 2023, 17:46:21 UTC |
| d6b8a8c | Linus Torvalds | 07 May 2023, 17:31:45 UTC | Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple more patches that would be good to get into -rc1: - Revert an i.MX patch that's causing video failures because division math goes sideways - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit variable instead of the usual u64 type - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a reset controller when it can't be selected" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case clk: sp7021: Adjust width of _m in HWM_FIELD_PREP() Revert "clk: imx: composite-8m: Add support to determine_rate" | 07 May 2023, 17:31:45 UTC |
| 1c1094e | Linus Torvalds | 07 May 2023, 17:17:33 UTC | Merge tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox api: allow direct registration to a channel and convert omap and pcc to use mbox_bind_client - omap and hi6220 : use of_property_read_bool - test: fix double-free and use spinlock header - rockchip and bcm-pdc: drop of_match_ptr - mpfs: change config symbol - mediatek gce: support MT6795 - qcom apcs: consolidate of_device_id and support IPQ9574 * tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC mailbox: qcom-apcs-ipc: do not grow the of_device_id dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795 mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE mailbox: bcm-pdc: drop of_match_ptr for ID table mailbox: rockchip: drop of_match_ptr for ID table mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write() mailbox: mailbox-test: Explicitly include header for spinlock support mailbox: Use of_property_read_bool() for boolean properties mailbox: pcc: Use mbox_bind_client mailbox: omap: Use mbox_bind_client mailbox: Allow direct registration to a channel | 07 May 2023, 17:17:33 UTC |
| 03e5cb7 | Linus Torvalds | 07 May 2023, 17:00:09 UTC | Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages | 07 May 2023, 17:00:09 UTC |
| 9a2d517 | Arnaldo Carvalho de Melo | 06 May 2023, 21:07:37 UTC | Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 06 May 2023, 21:07:37 UTC |
