| 1273092 | Randy Dunlap | 05 November 2007, 22:51:00 UTC | rtc: m48t59 fix section mismatch warning Change the name of this data to use a name (suffix) that is whitelisted by MODPOST so that the section warning is fixed (not generated). WARNING: vmlinux.o(.data+0x1b140): Section mismatch: reference to .init.text:m48t59_rtc_probe (between 'm48t59_rtc_platdrv' and 'm48t59_nvram_attr') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:32 UTC |
| f15cf51 | Jeff Dike | 05 November 2007, 22:50:59 UTC | uml: correctly strip kernel defines from userspace CFLAGS KERNEL_DEFINES needs whitespace trimmed, otherwise the whitespace crunching done by make fools the patsubst which is used to remove KERNEL_DEFINES from USER_CFLAGS. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:32 UTC |
| 4f40c05 | WANG Cong | 05 November 2007, 22:50:59 UTC | uml: fix incompatible types warning in previous SG fix Fix an incompatible-pointer warning. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:32 UTC |
| b07989f | Roel Kluin | 05 November 2007, 22:50:58 UTC | paride: fix 'and' typo in drivers/block/paride/pt.c Fix 'and' typo (PT_WRITE_OK is defined 2) Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:32 UTC |
| 6551198 | Adrian Bunk | 05 November 2007, 22:50:57 UTC | fs/afs/vlocation.c: fix off-by-one This patch fixes an off-by-one error spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:32 UTC |
| f11b7ae | Hugh Dickins | 05 November 2007, 22:50:56 UTC | arm26: remove it again A tiny vestige of arm26 has appeared: remove it again. (akpm: someone (tm) needs to remove include/asm-arm26/ too) Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:32 UTC |
| 0b030c2 | Andi Kleen | 05 November 2007, 22:50:56 UTC | Fix bitmap_scnlistprintf for empty masks When a bitmap is empty bitmap_scnlistprintf() would leave the buffer uninitialized. Set it to an empty string in this case. I didn't see any in normal kernel callers hitting this, but some custom debug code of mine did. Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:32 UTC |
| 5a75983 | Kamalesh Babulal | 05 November 2007, 22:50:55 UTC | Missing include file in kallsyms.h The Build with randconfig fails with following error with the 2.6.24-rc4-git9 include/linux/kallsyms.h:56: error: `NULL' undeclared (first use in this function) include/linux/kallsyms.h:56: error: (Each undeclared identifier is reported only once include/linux/kallsyms.h:56: error: for each function it appears in.) make[2]: *** [arch/powerpc/platforms/cell/spu_callbacks.o] Error 1 make[1]: *** [arch/powerpc/platforms/cell] Error 2 make: *** [arch/powerpc/platforms] Error 2 Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:32 UTC |
| e126520 | Mathieu Desnoyers | 05 November 2007, 22:50:54 UTC | local_t Documentation update Grant Grundler was asking for more detail about correct usage of local atomic operations and suggested adding the resulting summary to local_ops.txt. "Please add a bit more detail. If DaveM is correct (he normally is), then there must be limits on how the local_t can be used in the kernel process and interrupt contexts. I'd like those rules spelled out very clearly since it's easy to get wrong and tracking down such a bug is quite painful." Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:32 UTC |
| bf2cdef | Yinghai Lu | 05 November 2007, 22:50:53 UTC | serial: fix compile warning about putc drivers/serial/8250_early.c:80: warning: conflicting types for built-in function `putc' Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:32 UTC |
| ae5fbf7 | Vasily Averin | 05 November 2007, 22:50:53 UTC | i2o: debug messages corrected max_phys_segments and max_sectors were swapped Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:31 UTC |
| 5db6a4d | Alexey Dobriyan | 05 November 2007, 22:50:52 UTC | Dump stack during sysctl registration failure Let's make immediately obvious from where sysctl comes from and messages itself more noticeable. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:31 UTC |
| df59ebc | Roel Kluin | 05 November 2007, 22:50:51 UTC | i4l: errors with assignments in if Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 23:12:31 UTC |
| 4a8aa03 | Linus Torvalds | 05 November 2007, 22:31:52 UTC | Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds * 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: bugfixes for leds-gpio | 05 November 2007, 22:31:52 UTC |
| 5d66f15 | Linus Torvalds | 05 November 2007, 22:08:00 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: Add Kconfig option to disable deprecated pci_find_* API PCI: pciserial_resume_one ignored return value of pci_enable_device PCI Hotplug: cpqhp_pushbutton_thread(): remove a pointless if() check PCI: make pci_match_device() static PCI: Remove 3 incorrect MSI quirks. PCI: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USB PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set. PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge. PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 chips" | 05 November 2007, 22:08:00 UTC |
| 199fb21 | David Brownell | 31 October 2007, 09:37:37 UTC | leds: bugfixes for leds-gpio Three bugfixes to the leds-gpio driver, plus minor whitespace tweaks: - Do the INIT_WORK() before registering each LED, so if its trigger becomes immediately active it can schedule work without oopsing.. - Use normal registration, not platform_driver_probe(), so that devices appearing "late" (hotplug type) can still be bound. - Mark the driver remove code as "__devexit", preventing oopses when the underlying device is removed. These issues came up when using this driver with some GPIO expanders living on serial busses, which act unlike "normal" platform devices: they can appear and vanish along with the serial bus driver. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> | 05 November 2007, 21:54:41 UTC |
| 3131e53 | Linus Torvalds | 05 November 2007, 21:50:49 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix IDE_HFLAG_NO_ATAPI_DMA handling in config_drive_for_dma() ide: move ide_fixstring() documentation to ide-iops.c from ide.h ide: add missing #ifdef/#endif CONFIG_IDE_TASK_IOCTL ide: fix ide_find_dma_mode() to print human-readable info ide: add missing rq.ref_count initialization to ide_diag_taskfile() ide: clear HOB bit for REQ_TYPE_ATA_TASK requests in ide_end_drive_cmd() ide: check rq->cmd_type in drive_cmd_intr() ide/Kconfig: fix BLK_DEV_OFFBOARD dependencies ide: unexport ide_fix_driveid ide/Kconfig: add IDEDISK_MULTI_MODE text adapted from hdparm manual page ide: do_identify() string termination fix piix: add support for ICH7 on Acer 5602aWLMi | 05 November 2007, 21:50:49 UTC |
| 41557e7 | Linus Torvalds | 05 November 2007, 21:50:28 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (26 commits) V4L/DVB (6548): pvrusb2: Fix oops on module removal V4L/DVB (6547): V4L: remove PCI from VIDEO_VIVI depends V4L/DVB (6532): Add the remaining addresses for tda9887 V4L/DVB (6531): Fix a regression caused by commit 153962364dc6fa4a24571885fbe76506d8968610 V4L/DVB (6518): Fix tvp5150 default values V4L/DVB (6514): em28xx: Include linux/mm.h V4L/DVB (6506): saa7134-alsa: Fix mmap support V4L/DVB (6504): pvrusb2: Remove dead sysfs code V4L/DVB (6503): pvrusb2: Fix associativity logic error V4L/DVB (6501): stv0297: Signal strength fixes V4L/DVB (6500): tda10021: Fix reported signal strength V4L/DVB (6499): tda10021: Bit error counting fixed V4L/DVB (6498): ves1820: Change the acquisition range for clock recovery from 120 ppm to 240ppm V4L/DVB (6495): saa7146: saa7146_wait_for_debi_done fixes V4L/DVB (6479): use input functions, should depend on INPUT V4L/DVB (6478): ir-functions use input functions, should depend on INPUT V4L/DVB (6432): tuner: fix CONFIG_TUNER_TEA5761=m V4L/DVB (6407): planb: fix obvious interrupt handling bugs V4L/DVB (6406): saa7134: fix analog audio in on medion md8800 quadro V4L/DVB (6403): mt2131: replace comma with semicolon fix ... | 05 November 2007, 21:50:28 UTC |
| b285e0b | Linus Torvalds | 05 November 2007, 21:44:49 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/fix-kbuild * git://git.kernel.org/pub/scm/linux/kernel/git/sam/fix-kbuild: kbuild: do not pick up CFLAGS from the environment | 05 November 2007, 21:44:49 UTC |
| bd3989e | Jeff Garzik | 29 October 2007, 13:48:09 UTC | PCI: Add Kconfig option to disable deprecated pci_find_* API Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 05 November 2007, 21:35:17 UTC |
| ccb9d59 | Dirk Hohndel | 29 October 2007, 13:28:17 UTC | PCI: pciserial_resume_one ignored return value of pci_enable_device [PATCH] pciserial_resume_one ignored return value of pci_enable_device Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com> Acked-by: Alan Cox <alan@redhat.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 05 November 2007, 21:35:17 UTC |
| 0039541 | Adrian Bunk | 24 October 2007, 16:25:00 UTC | PCI Hotplug: cpqhp_pushbutton_thread(): remove a pointless if() check The Coverity checker spotted that we'd have already oops'ed if "ctrl" was NULL. Additionally, "func" had just been checked for not being NULL. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 05 November 2007, 21:35:17 UTC |
| d73460d | Adrian Bunk | 24 October 2007, 16:27:18 UTC | PCI: make pci_match_device() static pci_match_device() no longer has any other users. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 05 November 2007, 21:35:17 UTC |
| 5257dca | David Miller | 25 October 2007, 08:17:16 UTC | PCI: Remove 3 incorrect MSI quirks. Now that we have dealt with the real issue, in that some ATI SATA and USB controllers needed the INTX_DISABLE quirk, we can remove these AMD chipset global MSI disabling quirks. This reverts three changesets: 4be8f906435a6af241821ab5b94b2b12cb7d57d8 (PCI: disable MSI on RS690) aea6a433f50cd89b9cbd10850fd0b32f961f9883 (PCI: disable MSI on RD580) f122392f679ebed39db08074f935d770504623eb (PCI: disable MSI on RX790) This is based upon testing and feedback from Shane Huang <Shane.Huang@amd.com>. Cc: Shane Huang <Shane.Huang@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 05 November 2007, 21:35:17 UTC |
| bc38b41 | David Miller | 25 October 2007, 08:16:52 UTC | PCI: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USB Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 05 November 2007, 21:35:16 UTC |
| ba698ad | David Miller | 25 October 2007, 08:16:30 UTC | PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set. A reasonably common problem with some devices is that they will disable MSI generation when the INTX_DISABLE bit is set in the PCI_COMMAND register. Quirk this explicitly, guarding the pci_intx() calls in msi.c with this quirk indication. The first entries for this quirk are for 5714 and 5780 Tigon3 chips, and thus we can remove the workaround code from the tg3.c driver. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 05 November 2007, 21:35:16 UTC |
| 1d84b54 | David Miller | 25 October 2007, 08:15:53 UTC | PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge. This is the fix for the following problem: https://bugzilla.redhat.com/show_bug.cgi?id=227657 The bnx2 device 5706 complains about MSI not working behind a ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem: e3008dedff4bdc96a5f67224cd3d8d12237082a0: "PCI: disable MSI by default on systems with Serverworks HT1000 chips" was not entirely correct, and has been reverted. MSI does not work on the PCIX bus because the BIOS did not set the HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the bridge. We use the existing quirk_msi_ht_cap() to detect the problem and disable MSI in all buses behind it. Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: Anantha Subramanyam <ananth@broadcom.com> Cc: Naren Sankar <nsankar@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 05 November 2007, 21:35:16 UTC |
| 2cc3187 | David Miller | 25 October 2007, 08:15:24 UTC | PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 chips" This reverts commit e3008dedff4bdc96a5f67224cd3d8d12237082a0. The real bug was an INTX issue in the tg3 ethernet chip, and cured by commit c129d962a66c76964954a98b38586ada82cf9381 Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 05 November 2007, 21:35:16 UTC |
| bcbf6ee | Bartlomiej Zolnierkiewicz | 05 November 2007, 20:42:30 UTC | ide: fix IDE_HFLAG_NO_ATAPI_DMA handling in config_drive_for_dma() commit 33c1002ed912ac9dacedd5d5b166da3b72d18460 incorrectly changed return value from '0' to '-1', fix it (ns87415 was the only host driver affected since it uses both IDE_HFLAG_TRUST_BIOS_FOR_DMA and IDE_HFLAG_NO_ATAPI_DMA). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:30 UTC |
| 0174511 | Bartlomiej Zolnierkiewicz | 05 November 2007, 20:42:29 UTC | ide: move ide_fixstring() documentation to ide-iops.c from ide.h Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:29 UTC |
| 26a5b04 | Bartlomiej Zolnierkiewicz | 05 November 2007, 20:42:27 UTC | ide: add missing #ifdef/#endif CONFIG_IDE_TASK_IOCTL Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:27 UTC |
| d34887d | Bartlomiej Zolnierkiewicz | 05 November 2007, 20:42:27 UTC | ide: fix ide_find_dma_mode() to print human-readable info Problem reported by Mikael. Cc: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:27 UTC |
| 02ac246 | Bartlomiej Zolnierkiewicz | 05 November 2007, 20:42:27 UTC | ide: add missing rq.ref_count initialization to ide_diag_taskfile() Noticed by Tejun Heo. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:27 UTC |
| 1c11d24 | Bartlomiej Zolnierkiewicz | 05 November 2007, 20:42:27 UTC | ide: clear HOB bit for REQ_TYPE_ATA_TASK requests in ide_end_drive_cmd() ide_dump_ata_status() may set HOB bit before ide_end_drive_cmd() is called. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:27 UTC |
| 320112b | Bartlomiej Zolnierkiewicz | 05 November 2007, 20:42:26 UTC | ide: check rq->cmd_type in drive_cmd_intr() drive_cmd_intr() is used by both REQ_TYPE_ATA_CMD and REQ_TYPE_ATA_TASK but commands using PIO-in protocol are valid only for REQ_TYPE_ATA_CMD (&args[4] in case of REQ_TYPE_ATA_TASK points to a value for IDE_LCYL_REG register instead of the data buffer). This fix allows REQ_TYPE_ATA_TASK commands to use non-zero values for IDE_SECTOR_REG (args[3]). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:26 UTC |
| f7d7f3f | Bartlomiej Zolnierkiewicz | 05 November 2007, 20:42:26 UTC | ide/Kconfig: fix BLK_DEV_OFFBOARD dependencies This config option is effective only for host drivers that use IDE_HFLAG_OFF_BOARD host flag (aec62xx, generic, hpt34x, hpt366, pdc202xx_new, pdc202xx_old and tc86c001). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:26 UTC |
| 6d5dd21 | Adrian Bunk | 05 November 2007, 20:42:26 UTC | ide: unexport ide_fix_driveid ide_fix_driveid can now be unexported. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:26 UTC |
| 127ba28 | Matti Linnanvuori | 05 November 2007, 20:42:26 UTC | ide/Kconfig: add IDEDISK_MULTI_MODE text adapted from hdparm manual page Add IDEDISK_MULTI_MODE text adapted from hdparm manual page. Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:26 UTC |
| 699b052 | Tejun Heo | 05 November 2007, 20:42:25 UTC | ide: do_identify() string termination fix Terminates id->model string before invoking strstr() in do_identify(). Signed-off-by: Tejun Heo <tj@home-tj.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:25 UTC |
| afda5e4 | sebdeg@ngi.it | 05 November 2007, 20:42:25 UTC | piix: add support for ICH7 on Acer 5602aWLMi In piix.c (and in ata_piix.c) are already included some patches to skip the cable check on some laptops and to enable UDMA > 33 modes, but I've noticed than theese doesn't work on my Acer Aspire 5602WLMi (maybe exist more versions of this laptop). With this simple patch I can set transfer mode to UDMA100. From: "sebdeg@ngi.it" <sebdeg@ngi.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 05 November 2007, 20:42:25 UTC |
| c11eef2 | Linus Torvalds | 05 November 2007, 19:39:25 UTC | Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] tod clock: announce clocksource as perfect [S390] Rename "idle_time" attribute to "idle_time_us". [S390] Fix priority mistakes in drivers/s390/cio/cmf.c [S390] Fix memory detection. [S390] Fix compile on !CONFIG_SMP. [S390] device_schedule_callback() for dcssblk. [S390] Fix smsgiucv init on no iucv machines [S390] cio: use INIT_WORK to initialize struct work. | 05 November 2007, 19:39:25 UTC |
| 221d468 | Linus Torvalds | 05 November 2007, 19:39:00 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: lguest: tidy up documentation kernel/futex.c: make 3 functions static unexport access_process_vm lguest: make async_hcall() static | 05 November 2007, 19:39:00 UTC |
| 4d20826 | Kamalesh Babulal | 05 November 2007, 10:41:12 UTC | cpm_load_patch() - declartion conflict Commit f2a0bd3753dad7ea4605ebd5435716b39e9f92bb defines the function with "void cpm_load_patch(cpm8xx_t *cp)" prtotype and is declared as "extern void cpm_load_patch(volatile immap_t *immr)" in the header file. Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 19:38:29 UTC |
| 05aa345 | Christoph Lameter | 05 November 2007, 19:31:58 UTC | SLUB: Fix memory leak by not reusing cpu_slab Fix the memory leak that may occur when we attempt to reuse a cpu_slab that was allocated while we reenabled interrupts in order to be able to grow a slab cache. The per cpu freelist may contain objects and in that situation we may overwrite the per cpu freelist pointer loosing objects. This only occurs if we find that the concurrently allocated slab fits our allocation needs. If we simply always deactivate the slab then the freelist will be properly reintegrated and the memory leak will go away. Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 November 2007, 19:37:12 UTC |
| aac9e28 | Linus Torvalds | 05 November 2007, 17:57:13 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] ibmvscsi: Prevent IO during partner login [SCSI] lpfc : Correct queue tag handling [SCSI] Update MAINTAINER email address and trees [SCSI] osst: fix if (...) \n #if... cases missing semicolons when false | 05 November 2007, 17:57:13 UTC |
| 633872b | Rusty Russell | 05 November 2007, 10:55:57 UTC | lguest: tidy up documentation After Adrian Bunk's "make async_hcall static" moved things around, update comments to match (aka "make Guest"). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> | 05 November 2007, 10:55:57 UTC |
| fad23fc | Adrian Bunk | 02 November 2007, 15:43:22 UTC | kernel/futex.c: make 3 functions static The following functions can now become static again: - get_futex_key() - get_futex_key_refs() - drop_futex_key_refs() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> | 05 November 2007, 10:53:46 UTC |
| 02c3530 | Adrian Bunk | 02 November 2007, 15:43:28 UTC | unexport access_process_vm This patch removes the no longer used EXPORT_SYMBOL_GPL(access_process_vm). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> | 05 November 2007, 10:53:39 UTC |
| 9b56fdb | Adrian Bunk | 02 November 2007, 15:43:10 UTC | lguest: make async_hcall() static async_hcall() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> | 05 November 2007, 10:53:29 UTC |
| d2cb0e6 | Christian Borntraeger | 05 November 2007, 10:10:14 UTC | [S390] tod clock: announce clocksource as perfect The Time of Day clock is the standard time source for s390. It is - monotonic - allows very fast reading - architecture guarantees at least microsecond stepping - available as part of the architecture We should announce the rate of tod as 400 to be in sync with the description found in clocksource.h: "400-499:Perfect The ideal clocksource. A must-use where available." This change will prefer tod over less reliable clock sources. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 05 November 2007, 10:10:18 UTC |
| 69d39d6 | Heiko Carstens | 05 November 2007, 10:10:13 UTC | [S390] Rename "idle_time" attribute to "idle_time_us". Seems that people prefer to have the unit encoded in the attribute name. Also makes parsing easier. Now we have: # cat /sys/devices/system/cpu/cpu0/idle_time_us 131473592 instead of # cat /sys/devices/system/cpu/cpu0/idle_time 131473592 us Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 05 November 2007, 10:10:17 UTC |
| b2eaee6 | Roel Kluin | 05 November 2007, 10:10:12 UTC | [S390] Fix priority mistakes in drivers/s390/cio/cmf.c Fixes priority mistakes similar to '!x & y' Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 05 November 2007, 10:10:17 UTC |
| 0b8da65 | Heiko Carstens | 05 November 2007, 10:10:11 UTC | [S390] Fix memory detection. Yet another patch in the countless series of memory detection fixes: if the last area of the reported storage size is a hole the detection loop will loop forever. Just break chunk detection loop if its end is going to be larger than reported storage size. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 05 November 2007, 10:10:17 UTC |
| 0d2be08 | Heiko Carstens | 05 November 2007, 10:10:10 UTC | [S390] Fix compile on !CONFIG_SMP. Commit fae8b22d3e3e3a3d317a7746493997af02a3f35c "[S390] Add per-cpu idle time / idle count sysfs attributes" causes a link error on !CONFIG_SMP. Fix this by adding some #ifdef's. Real fix would be to cleanup the code since we don't register a cpu on !CONFIG_SMP. But that would be quite a big patch. For the time being this is good enough. arch/s390/kernel/built-in.o: In function `do_monitor_call': (.text+0x50d4): undefined reference to `per_cpu__s390_idle' arch/s390/kernel/built-in.o: In function `cpu_idle': (.text+0x518c): undefined reference to `per_cpu__s390_idle' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 05 November 2007, 10:10:16 UTC |
| 931bb68 | Gerald Schaefer | 05 November 2007, 10:10:09 UTC | [S390] device_schedule_callback() for dcssblk. Unregistering a device from within a device attribute handler leads to a deadlock. Need to use device_schedule_callback() to unregister device in error path. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 05 November 2007, 10:10:16 UTC |
| 0fc3ddd | Christian Borntraeger | 05 November 2007, 10:10:08 UTC | [S390] Fix smsgiucv init on no iucv machines smsgiucv is a driver that relies on iucv to work properly. If iucv ans smsgiucv are compiled into the kernel and run on an lpar the following scenario happens: iucv is initialized early as a subsystem. It checks for z/VM and returns with EPROTONOTSUPPORT. Later smsgiucv tries to run driver_register with iucv_bus as bus. As this bus is not initialized the driver core and list debugging issue several warnings and oopses. Solution is to let smsgiucv also check for z/VM and return EPROTONOTSUPPORT as well. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 05 November 2007, 10:10:16 UTC |
| 33583c3 | Heiko Carstens | 05 November 2007, 10:10:07 UTC | [S390] cio: use INIT_WORK to initialize struct work. Use INIT_WORK to initialize struct work and don't initialize a struct work partial by explicitly initializing its private structures. Fixes the following lockdep bug because no key was assigned: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. 0000000001f07bb8 0000000001f07bf8 0000000000000002 0000000000000000 0000000001f07c98 0000000001f07c10 0000000001f07c10 0000000000015406 0000000000000000 0000000000000002 0000000000000000 0000000000000000 0000000001f07bf8 000000000000000c 0000000001f07bf8 0000000001f07c68 000000000039ae60 0000000000015406 0000000001f07bf8 0000000001f07c48 Call Trace: ([<0000000000015376>] show_trace+0xda/0x104) [<0000000000015460>] show_stack+0xc0/0xf8 [<00000000000154c6>] dump_stack+0x2e/0x3c [<000000000006a71e>] __lock_acquire+0x47e/0x11a0 [<000000000006b4f0>] lock_acquire+0xb0/0xd8 [<00000000000555a6>] run_workqueue+0x1aa/0x24c [<00000000000556de>] worker_thread+0x96/0xf4 [<000000000005c210>] kthread+0x90/0xb4 [<000000000001947a>] kernel_thread_starter+0x6/0xc [<0000000000019474>] kernel_thread_starter+0x0/0xc Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 05 November 2007, 10:10:16 UTC |
| 9f259cc | H. Peter Anvin | 05 November 2007, 01:54:31 UTC | x86 setup: set %ebx == %ebp == %edi == 0 on protected mode entry In accordance with the newly formalized 32-bit boot protocol, set %ebx == %ebp == %edi == 0 in order to support future extensions to the protocol. Signed-off-by: H. Peter Anvin <hpa@zytor.com> | 05 November 2007, 03:48:04 UTC |
| 7ed1929 | H. Peter Anvin | 05 November 2007, 01:50:12 UTC | x86 setup: add a near jump to serialize %cr0 on 386/486 The 386 and 486 needs a jump immediately after setting %cr0 in order to serialize the pipeline. Signed-off-by: H. Peter Anvin <hpa@zytor.com> | 05 November 2007, 03:47:46 UTC |
| b55d1b1 | Linus Torvalds | 05 November 2007, 02:00:35 UTC | Merge branch 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/sis: missing mutex unlock in error path. radeon: set the address to access the GART table on the CPU side correctly | 05 November 2007, 02:00:35 UTC |
| aa64193 | Linus Torvalds | 05 November 2007, 01:55:22 UTC | Merge branch 'an' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'an' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] Utilize new SCSI event infrastructure SCSI: add asynchronous event notification API | 05 November 2007, 01:55:22 UTC |
| 038477a | Roel Kluin | 05 November 2007, 00:53:18 UTC | drm/sis: missing mutex unlock in error path. airlied: separated this out from a patch on lkml. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Dave Airlie <airlied@linux.ie> | 05 November 2007, 00:53:18 UTC |
| 7fc8686 | Dave Airlie | 05 November 2007, 00:45:27 UTC | radeon: set the address to access the GART table on the CPU side correctly This code relied on the CPU and GPU address for the aperture being the same, On some r5xx hardware I was playing with I noticed that this isn't always true. This fixes issues seen on some r400 cards. (bugs.freedesktop.org 9957) Signed-off-by: Dave Airlie <airlied@redhat.com> | 05 November 2007, 00:49:04 UTC |
| 4f663bd | Mike Isely | 03 November 2007, 03:06:42 UTC | V4L/DVB (6548): pvrusb2: Fix oops on module removal The pvrusb2 driver is tearing down its sysfs related pieces in the incorrect order. This leaves dangling pointers which causes the kernel device core to oops. The problem has been present virtually forever but became malignant with the changeover to the way of handling /sys/class. Fix is just to make sure we don't tear down the class structure until AFTER the driver instances are deregistered. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:30 UTC |
| ac72fed | Brandon Philips | 04 November 2007, 09:28:51 UTC | V4L/DVB (6547): V4L: remove PCI from VIDEO_VIVI depends vivi.c is a virtual driver that builds without PCI and should run on non-pci hardware. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:30 UTC |
| fe51f81 | Mauro Carvalho Chehab | 02 November 2007, 19:46:28 UTC | V4L/DVB (6532): Add the remaining addresses for tda9887 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:29 UTC |
| 8c6da5c | Ludovico Cavedon | 02 November 2007, 19:37:32 UTC | V4L/DVB (6531): Fix a regression caused by commit 153962364dc6fa4a24571885fbe76506d8968610 From: Ludovico Cavedon <cavedon@sssup.it> Signed-off-by: Ludovico Cavedon <cavedon@sssup.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:29 UTC |
| 032c202 | Mauro Carvalho Chehab | 02 November 2007, 00:33:38 UTC | V4L/DVB (6518): Fix tvp5150 default values Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:29 UTC |
| 6d35c8f | Trent Piepho | 01 November 2007, 04:16:09 UTC | V4L/DVB (6514): em28xx: Include linux/mm.h This em28xx-video.c uses functions from this header, but doesn't include it. It depends on some v4l headers included two levels down including poll.h, which includes mm.h. These v4l headers might change, so it's best to include the headers needed directly. It also causes problems for the out of core build system's backward compatibility with older kernels, which is the real reason I bothered to create a patch for something that would otherwise be so minor that it would hardly be worth the trouble. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:28 UTC |
| 32d111a | Alexander E. Patrakov | 31 October 2007, 14:40:09 UTC | V4L/DVB (6506): saa7134-alsa: Fix mmap support Trent Piepho wrote: > I do not think the saa7134-alsa driver supports mmap. The cx88-alsa driver > also claimed to support mmap, but it never worked until I fixed it. It's > pretty clear that the code in saa7134-alsa was based on the same code as > cx88-alsa, so it's likely it has the same bug. You are right. The patch below (based on your cx88 patch, but I don't really understand it) fixes mmap support in saa7134-alsa for me. Recording via mmap (arecord -M -f S16_LE -c 2 -r 32000 -D hw:1) didn't work at all before, works now, tested for at least 20 minutes (but, unfortunately, with one overrun at least 0.719 ms long). Signed-off-by: Alexander E. Patrakov <patrakov@ums.usu.ru> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:26 UTC |
| f21daa4 | Mike Isely | 29 October 2007, 01:19:53 UTC | V4L/DVB (6504): pvrusb2: Remove dead sysfs code The pvrusb2 driver's sysfs implementation had long since implemented a dummy hotplug function because at the time the kernel would oops without at least the empty function being present. Today - after numerous class interface changes in the kernel - this pvrusb2 change had been dutifully carried forward but an inspection of the kernel sources shows that it is no longer needed. So remove the dummy function and its reference. This also solves a recurring backwards compatibility issue in the pvrusb2 driver as the class interface has been getting thrashed in the kernel. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:26 UTC |
| 4ed53a5 | Roel Kluin | 29 October 2007, 01:15:33 UTC | V4L/DVB (6503): pvrusb2: Fix associativity logic error if(!x & y) should either be if(!(x & y)) or if(!x && y) I made changes as seemed appropriate, but please review this is against current git. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:25 UTC |
| 85085ad | Hartmut Birr | 31 October 2007, 05:04:16 UTC | V4L/DVB (6501): stv0297: Signal strength fixes Fixes the signal strength value (higher value = higher signal strength) and scales the value to the range of 0..ffff. The characteristic itself is wrong. To get proper values on a TT-C2300 in the range of 40..60% real signal strength, the values from the patch should be divide by two. The attached patch doesn't fix the characteristic. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:25 UTC |
| 7cccccc | Hartmut Birr | 31 October 2007, 04:57:58 UTC | V4L/DVB (6500): tda10021: Fix reported signal strength Fix reported signal strength value (higher value = higher signal strength). Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:25 UTC |
| 3de0e18 | Hartmut Birr | 31 October 2007, 04:50:47 UTC | V4L/DVB (6499): tda10021: Bit error counting fixed Bit error counting fixed for the tda10021. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:24 UTC |
| 4a3625b | Oliver Endriss | 31 October 2007, 04:34:25 UTC | V4L/DVB (6498): ves1820: Change the acquisition range for clock recovery from 120 ppm to 240ppm Change the acquisition range for clock recovery from 120 ppm to 240ppm. Apparently, some cable providers in Germany are playing with their parameters, and the capture range of the ves1820 is too small to acquire a lock with the current setting... ;-( Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:24 UTC |
| 26ac14e | Oliver Endriss | 31 October 2007, 03:39:48 UTC | V4L/DVB (6495): saa7146: saa7146_wait_for_debi_done fixes Two fixes for the 'saa7146_wait_for_debi_done' code: (a) Timeout did not work when the routine was called with interrupts disabled. (b) Reduce PCI I/O load caused by saa7146_wait_for_debi_done. Seems to be very important on fast machines! Based on code posted by Hartmut Birr @vdr-portal. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:23 UTC |
| cb20630 | Randy Dunlap | 29 October 2007, 18:19:55 UTC | V4L/DVB (6479): use input functions, should depend on INPUT All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:23 UTC |
| 5efeb97 | Randy Dunlap | 29 October 2007, 18:19:50 UTC | V4L/DVB (6478): ir-functions use input functions, should depend on INPUT Media ir-functions uses input_(*) functions so it should depend on the INPUT config symbol. drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:21 UTC |
| 04d934f | Adrian Bunk | 24 October 2007, 12:06:47 UTC | V4L/DVB (6432): tuner: fix CONFIG_TUNER_TEA5761=m This patch fixes CONFIG_TUNER_TEA5761=m broken by commit ca805d57cf5ea7482ed3da28653f30621249ee45. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:21 UTC |
| 52c28d4 | Jeff Garzik | 26 October 2007, 12:00:37 UTC | V4L/DVB (6407): planb: fix obvious interrupt handling bugs irq handlers have returned a return value for years now... catch up with the times. Also, ditch unneeded prototype. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:20 UTC |
| 387a299 | hermann pitton | 26 October 2007, 00:26:53 UTC | V4L/DVB (6406): saa7134: fix analog audio in on medion md8800 quadro saa7134: fix analog audio in on medion md8800 quadro, aka CTX944 Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:20 UTC |
| 195ccf6 | Steven Toth | 25 October 2007, 02:12:58 UTC | V4L/DVB (6403): mt2131: replace comma with semicolon fix Semicolon fix. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:19 UTC |
| dd7d501 | Steven Toth | 25 October 2007, 00:05:51 UTC | V4L/DVB (6402): s5h1409: Fix broken QAM support This patch enables QAM Annex-B support (US digital cable) for the s5h1409 VSB/QAM demodulator. Tested successfully with the mt2131 tuner, present on the following supported boards: Hauppauge WinTV-HVR-1250 Hauppauge WinTV-HVR-1800 Hauppauge WinTV-HVR-1800lp This patch is also known to work with an upcoming XC5000 tuner driver. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:19 UTC |
| bb8d56a | Jonathan Corbet | 23 October 2007, 20:31:36 UTC | V4L/DVB (6395): cafe_ccic: Add a pointer to the data sheet Add a pointer to the (recently posted) Cafe data sheet. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:18 UTC |
| c303449 | Jonathan Corbet | 23 October 2007, 20:30:27 UTC | V4L/DVB (6394): Fix a cafe_ccic resume bug If the system is suspended while the camera is streaming, it will not continue streaming on resume. Save the state properly so that resume works. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:18 UTC |
| a8ab68b | Trent Piepho | 22 October 2007, 20:44:55 UTC | V4L/DVB (6392): bttv: Update initial image size when set via V4L1 VIDIOCMCAPTURE The V4L1 spec says that the image size should be with with VIDIOCSWIN before requesting buffers with VIDIOCGMBUF and capturing into them with VIDIOCMCAPTURE. But it seems that many apps don't do this. They set the size using the fields in the VIDIOCMCAPTURE ioctl. The driver doesn't know what size to capture until it actually starts to capture. In particular, it doesn't know what size to capture until it has already mmap the captured buffers. Which is quite stupid. Why V4L1 has size and format fields for VIDIOCMCAPTURE I have no idea. Many drivers don't support this, including those using v4l1-compat. The bttv does, which is probably the only reason such broken software is so prevalent. But, the driver doesn't adjust its idea of what size is being captured when it is set this way. If you try to query the driver's current setting with v4l2-ctl, it won't be correct. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:16 UTC |
| 3537843 | Trent Piepho | 22 October 2007, 20:44:54 UTC | V4L/DVB (6391): bttv: SPICT ioctl doesn't work with vlc The bttv driver instists that the depth specified in the call to VIDIOCSPICT match the pixel format specified in the same call. vlc doesn't set the depth field, which makes the SPICT ioctl always fail. The V4L1 standard is not clear on how most operation are supposed to work, and this is no exception. The depth field would appear to be entirely redundant, as the pixel format specifies a specific depth. It could be that this field was only meant for output from the *G*PICT ioctl and should be ignored in *S*PICT. This is in fact what the v4l1-compat wrapper does. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:16 UTC |
| 0180bf3 | Mauro Carvalho Chehab | 26 October 2007, 03:11:17 UTC | V4L/DVB (6390): Updates missing entries at CARDLIST.em28xx Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> | 04 November 2007, 23:41:15 UTC |
| 5da0c7a | Linus Torvalds | 04 November 2007, 21:14:15 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: iso and async streams: s/g list fix | 04 November 2007, 21:14:15 UTC |
| 615bb29 | Mark Lord | 04 November 2007, 02:04:03 UTC | rtc: ignore msb when reading back mday from alarm I have a system here that actively relies upon RTC wake alarms, and it has been failing (again) for a few days when attempting to use the /sys/class/rtc/rtc?/wakealarm interface. The old (fixed by Linus) /proc/ interface still works, but I'd like to get it using the new one. This patch fixes rtc-cmos to ignore the two upper bits when reading the BCD mday (day of month) register from CMOS. Some systems (eg. mine) seem to have the top bit set to "1" for some reason. The older /proc/ interface ignores the upper bits, and so we should too. Signed-off-by: Mark Lord <mlord@pobox.com> Acked-by: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 04 November 2007, 21:13:09 UTC |
| 69ee0b3 | Sam Ravnborg | 04 November 2007, 18:00:46 UTC | kbuild: do not pick up CFLAGS from the environment Too many people have CFLAGS set to support building userspace. And now Kbuild picks up CFLAGS this caused troubles. Although people should realise that setting CFLAGS has a 'global' effect the impact on the kernel build is a suprise. So change kbuild to pick up value from KCFLAGS that is much less used. When kbuild pick up a value it will warn like this: Makefile:544: "WARNING: Appending $KCFLAGS (-O3) from environment to kernel $CFLAGS" Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Bächler <thomas@archlinux.org> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> | 04 November 2007, 18:00:46 UTC |
| 9e66269 | Jens Axboe | 04 November 2007, 08:44:56 UTC | ieee1394: iso and async streams: s/g list fix Torsten Kaiser wrote: > Looking that calltrace upwards, it seems replacing the > memset(dma->sglist,...) with sg_init_table(...) would fix the BUG_ON() > as that inits the SG_MAGIC. Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> | 04 November 2007, 13:31:16 UTC |
| f26792d | Jeff Garzik | 29 October 2007, 21:18:39 UTC | [libata] Utilize new SCSI event infrastructure An end to CD-ROM polling (if you have a device that supports AN)... hooray! Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 04 November 2007, 02:23:02 UTC |
| a341cd0 | Jeff Garzik | 29 October 2007, 21:15:22 UTC | SCSI: add asynchronous event notification API Originally based on a patch by Kristen Carlson Accardi @ Intel. Copious input from James Bottomley. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 04 November 2007, 02:23:02 UTC |
| b4f5550 | Linus Torvalds | 03 November 2007, 19:43:36 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: [BLOCK] Don't allow empty barriers to be passed down to queues that don't grok them dm: bounce_pfn limit added Deadline iosched: Fix batching fairness Deadline iosched: Reset batch for ordered requests Deadline iosched: Factor out finding latter reques | 03 November 2007, 19:43:36 UTC |
| 160acc2 | Linus Torvalds | 03 November 2007, 19:43:21 UTC | Merge branch 'sg' of git://git.kernel.dk/linux-2.6-block * 'sg' of git://git.kernel.dk/linux-2.6-block: [SG] Get rid of __sg_mark_end() cleanup asm/scatterlist.h includes SG: Make sg_init_one() use general table init functions | 03 November 2007, 19:43:21 UTC |
| a7e1e00 | Linus Torvalds | 03 November 2007, 19:42:52 UTC | Merge branch 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep * 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep: lockdep: fix a typo in the __lock_acquire comment sched: fix unconditional irq lock lockdep: fixup irq tracing | 03 November 2007, 19:42:52 UTC |
| 2180626 | Linus Torvalds | 03 November 2007, 19:41:58 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Update defconfigs. sh64: fix dma_cache_sync() compilation sh64: Move DMA macros from pci.h to scatterlist.h. | 03 November 2007, 19:41:58 UTC |
| 5c27d0f | Linus Torvalds | 03 November 2007, 19:41:42 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6 * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (24 commits) sh: Update r7785rp defconfig. sh: mach-type updates. sh: Fix up r7780rp highlander CF access size. sh: Terminate .eh_frame in VDSO with a 4-byte 0. sh: Correct SUBARCH matching. sh: Decouple 4k and soft/hardirq stacks. sh: Fix optimized __copy_user() movca.l usage. sh: Clean up SR.RB Kconfig mess. sh: Kill off dead ipr_irq_demux(). sh: Make SH7750 oprofile compile again. sh: Provide a __read_mostly section wrapper. sh: linker script tidying. sh: Move zero page param defs somewhere sensible. sh: Use generic SMP_CACHE_BYTES/L1_CACHE_ALIGN. sh: Kill off legacy embedded ramdisk section. sh: Fix up early mem cmdline parsing. sh: Enable USBF on MS7722SE. sh: Add resource of USBF for SH7722. maple: Fix maple bus compiler warning sh: fix zImage build with >=binutils-2.18 ... | 03 November 2007, 19:41:42 UTC |
