| 13d5ef9 | Peng Haitao | 16 May 2008, 02:15:04 UTC | [PATCH] kernel/audit.c: nlh->nlmsg_type is gotten more than once The first argument "nlh->nlmsg_type" of audit_receive_filter() should be modified to "msg_type" in audit_receive_msg(). Signed-off-by: Peng Haitao <penght@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 25 June 2008, 03:36:21 UTC |
| 481c534 | Christoph Lameter | 21 June 2008, 23:46:35 UTC | Slab: Fix memory leak in fallback_alloc() The zonelist patches caused the loop that checks for available objects in permitted zones to not terminate immediately. One object per zone per allocation may be allocated and then abandoned. Break the loop when we have successfully allocated one object. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 21 June 2008, 23:51:02 UTC |
| 62a8efe | Linus Torvalds | 21 June 2008, 23:43:56 UTC | Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: Ext4: Fix online resize block group descriptor corruption | 21 June 2008, 23:43:56 UTC |
| bec95aa | Linus Torvalds | 21 June 2008, 19:31:02 UTC | Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6 * 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (lm75) sensor reading bugfix hwmon: (abituguru3) update driver detection hwmon: (w83791d) new maintainer hwmon: (abituguru3) Identify Abit AW8D board as such hwmon: Update the sysfs interface documentation hwmon: (adt7473) Initialize max_duty_at_overheat before use hwmon: (lm85) Fix function RANGE_TO_REG() | 21 June 2008, 19:31:32 UTC |
| 71c2742 | Bernhard Walle | 21 June 2008, 17:01:02 UTC | Add return value to reserve_bootmem_node() This patch changes the function reserve_bootmem_node() from void to int, returning -ENOMEM if the allocation fails. This fixes a build problem on x86 with CONFIG_KEXEC=y and CONFIG_NEED_MULTIPLE_NODES=y Signed-off-by: Bernhard Walle <bwalle@suse.de> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 21 June 2008, 18:25:10 UTC |
| a192144 | Linus Torvalds | 21 June 2008, 15:44:08 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: netns: Don't receive new packets in a dead network namespace. sctp: Make sure N * sizeof(union sctp_addr) does not overflow. pppoe: warning fix ipv6: Drop packets for loopback address from outside of the box. ipv6: Remove options header when setsockopt's optlen is 0 mac80211: detect driver tx bugs | 21 June 2008, 15:44:08 UTC |
| b9f75f4 | Eric W. Biederman | 21 June 2008, 05:16:51 UTC | netns: Don't receive new packets in a dead network namespace. Alexey Dobriyan <adobriyan@gmail.com> writes: > Subject: ICMP sockets destruction vs ICMP packets oops > After icmp_sk_exit() nuked ICMP sockets, we get an interrupt. > icmp_reply() wants ICMP socket. > > Steps to reproduce: > > launch shell in new netns > move real NIC to netns > setup routing > ping -i 0 > exit from shell > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<ffffffff803fce17>] icmp_sk+0x17/0x30 > PGD 17f3cd067 PUD 17f3ce067 PMD 0 > Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC > CPU 0 > Modules linked in: usblp usbcore > Pid: 0, comm: swapper Not tainted 2.6.26-rc6-netns-ct #4 > RIP: 0010:[<ffffffff803fce17>] [<ffffffff803fce17>] icmp_sk+0x17/0x30 > RSP: 0018:ffffffff8057fc30 EFLAGS: 00010286 > RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81017c7db900 > RDX: 0000000000000034 RSI: ffff81017c7db900 RDI: ffff81017dc41800 > RBP: ffffffff8057fc40 R08: 0000000000000001 R09: 000000000000a815 > R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff8057fd28 > R13: ffffffff8057fd00 R14: ffff81017c7db938 R15: ffff81017dc41800 > FS: 0000000000000000(0000) GS:ffffffff80525000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 000000017fcda000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 0, threadinfo ffffffff8053a000, task ffffffff804fa4a0) > Stack: 0000000000000000 ffff81017c7db900 ffffffff8057fcf0 ffffffff803fcfe4 > ffffffff804faa38 0000000000000246 0000000000005a40 0000000000000246 > 000000000001ffff ffff81017dd68dc0 0000000000005a40 0000000055342436 > Call Trace: > <IRQ> [<ffffffff803fcfe4>] icmp_reply+0x44/0x1e0 > [<ffffffff803d3a0a>] ? ip_route_input+0x23a/0x1360 > [<ffffffff803fd645>] icmp_echo+0x65/0x70 > [<ffffffff803fd300>] icmp_rcv+0x180/0x1b0 > [<ffffffff803d6d84>] ip_local_deliver+0xf4/0x1f0 > [<ffffffff803d71bb>] ip_rcv+0x33b/0x650 > [<ffffffff803bb16a>] netif_receive_skb+0x27a/0x340 > [<ffffffff803be57d>] process_backlog+0x9d/0x100 > [<ffffffff803bdd4d>] net_rx_action+0x18d/0x250 > [<ffffffff80237be5>] __do_softirq+0x75/0x100 > [<ffffffff8020c97c>] call_softirq+0x1c/0x30 > [<ffffffff8020f085>] do_softirq+0x65/0xa0 > [<ffffffff80237af7>] irq_exit+0x97/0xa0 > [<ffffffff8020f198>] do_IRQ+0xa8/0x130 > [<ffffffff80212ee0>] ? mwait_idle+0x0/0x60 > [<ffffffff8020bc46>] ret_from_intr+0x0/0xf > <EOI> [<ffffffff80212f2c>] ? mwait_idle+0x4c/0x60 > [<ffffffff80212f23>] ? mwait_idle+0x43/0x60 > [<ffffffff8020a217>] ? cpu_idle+0x57/0xa0 > [<ffffffff8040f380>] ? rest_init+0x70/0x80 > Code: 10 5b 41 5c 41 5d 41 5e c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 > 48 83 ec 08 48 8b 9f 78 01 00 00 e8 2b c7 f1 ff 89 c0 <48> 8b 04 c3 48 83 c4 08 > 5b c9 c3 66 66 66 66 66 2e 0f 1f 84 00 > RIP [<ffffffff803fce17>] icmp_sk+0x17/0x30 > RSP <ffffffff8057fc30> > CR2: 0000000000000000 > ---[ end trace ea161157b76b33e8 ]--- > Kernel panic - not syncing: Aiee, killing interrupt handler! Receiving packets while we are cleaning up a network namespace is a racy proposition. It is possible when the packet arrives that we have removed some but not all of the state we need to fully process it. We have the choice of either playing wack-a-mole with the cleanup routines or simply dropping packets when we don't have a network namespace to handle them. Since the check looks inexpensive in netif_receive_skb let's just drop the incoming packets. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 June 2008, 05:16:51 UTC |
| 735ce97 | David S. Miller | 21 June 2008, 05:04:34 UTC | sctp: Make sure N * sizeof(union sctp_addr) does not overflow. As noticed by Gabriel Campana, the kmalloc() length arg passed in by sctp_getsockopt_local_addrs_old() can overflow if ->addr_num is large enough. Therefore, enforce an appropriate limit. Signed-off-by: David S. Miller <davem@davemloft.net> | 21 June 2008, 05:04:34 UTC |
| 2645a3c | Stephen Hemminger | 21 June 2008, 04:58:02 UTC | pppoe: warning fix Fix warning: drivers/net/pppoe.c: In function 'pppoe_recvmsg': drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast because skb->len is unsigned int and total_len is size_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 21 June 2008, 04:58:02 UTC |
| b732d96 | Linus Torvalds | 21 June 2008, 00:10:04 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] SN2: security hole in sn2_ptc_proc_write | 21 June 2008, 00:10:04 UTC |
| a744e01 | Ivan Kokshaysky | 20 June 2008, 23:28:54 UTC | alpha: resurrect Cypress IDE quirk Which was removed in the hope that generic legacy IDE quirk in drivers/pci/probe.c is sufficient for Cypress IDE. It isn't, as this controller has non-standard BAR layout: secondary channel registers are in the BAR0-1 of the second PCI function - not in the BAR2-3 of the same function, as the generic quirk routine assumes. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 June 2008, 23:46:10 UTC |
| d559d4a | Ivan Kokshaysky | 20 June 2008, 23:28:31 UTC | alpha: fix compile failures with gcc-4.3 (bug #10438) Vast majority of these build failures are gcc-4.3 warnings about static functions and objects being referenced from non-static (read: "extern inline") functions, in conjunction with our -Werror. We cannot just convert "extern inline" to "static inline", as people keep suggesting all the time, because "extern inline" logic is crucial for generic kernel build. So - just make sure that all callees of critical "extern inline" functions are also "extern inline"; - use "static inline", wherever it's possible. traps.c: work around gcc-4.3 being too smart about array bounds-checking. TODO: add "gnu_inline" attribute to all our "extern inline" functions to ensure desired behaviour with future compilers. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 June 2008, 23:46:10 UTC |
| ede4269 | Ivan Kokshaysky | 20 June 2008, 23:26:21 UTC | alpha: link failure fix With built-in scsi disk driver, the final link fails with a following error: `.exit.text' referenced in section `.rodata' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o This happens with -Os (CONFIG_CC_OPTIMIZE_FOR_SIZE=y) with all gcc-4 versions, and also with -O2 and gcc-4.3. The problem is in sd.c:sd_major() being inlined into __exit function exit_sd(), and the compiler generating a jump table in .rodata section for the 'switch' statement in sd_major(). So we have references to discarded section. Fixed with a big hammer in the form of -fno-jump-tables. Note that jump tables vs. discarded sections is a generic problem, other architectures are just lucky not to suffer from it. But with a slightly more complex switch/case statement it can be reproduced on x86 as well. So maybe at some point we should consider -fno-jump-tables as a generic compile option... Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 June 2008, 23:46:10 UTC |
| 9267b4b | Ivan Kokshaysky | 20 June 2008, 23:25:39 UTC | alpha: fix module load failures on smp (bug #10926) To calculate addresses of locally defined variables, GCC uses 32-bit displacement from the GP. Which doesn't work for per cpu variables in modules, as an offset to the kernel per cpu area is way above 4G. The workaround is to force allocation of a GOT entry for per cpu variable using ldq instruction with a 'literal' relocation. I had to use custom asm/percpu.h, as a required argument magic doesn't work with asm-generic/percpu.h macros. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 June 2008, 23:46:10 UTC |
| d70ac82 | Linus Torvalds | 20 June 2008, 23:19:44 UTC | Linux 2.6.26-rc7 | 20 June 2008, 23:19:44 UTC |
| 06d5e33 | Linus Torvalds | 20 June 2008, 19:46:47 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: BAST: Remove old IDE driver pcmcia ide kingston compactflash's have a new manufacturer id pcmcia: add another pata/ide ID pcmcia: add an pata/ide ID ide: increase timeout in wait_drive_not_busy() palm_bk3710: fix resource management | 20 June 2008, 19:46:47 UTC |
| d5545fa | Linus Torvalds | 20 June 2008, 19:41:10 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: Kconfig menu touch-up firewire: Kconfig menu touch-up firewire: deadline for PHY config transmission firewire: fw-ohci: unify printk prefixes firewire: fill_bus_reset_event needs lock protection firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID firewire: fw-ohci: disable PHY packet reception into AR context firewire: fw-ohci: use of uninitialized data in AR handler firewire: don't panic on invalid AR request buffer | 20 June 2008, 19:41:10 UTC |
| 77a189c | Linus Torvalds | 20 June 2008, 19:39:12 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: no AC status notification ACPI Exception (video-1721): UNKNOWN_STATUS_CODE, Cant attach device | 20 June 2008, 19:39:12 UTC |
| 9aef85c | Linus Torvalds | 20 June 2008, 19:38:18 UTC | Merge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits) drm: only trust core drm ioctls - driver ioctls are a mess. drm/i915: add support for Intel series 4 chipsets. drm/radeon: add hier-z registers for r300 and r500 chipsets drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT drm/radeon: switch IGP gart to use radeon_write_agp_base() drm/radeon: Restore sw interrupt on resume drm/r500: add support for AGP based cards. drm/radeon: fix texture uploads with large 3d textures (bug 13980) drm/radeon: add initial r500 support. drm/radeon: init pipe setup in kernel code. drm/radeon: fixup radeon_do_engine_reset drm/radeon: fix pixcache and purge/cache flushing registers drm/radeon: write AGP_BASE_2 on chips that support it. drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support drm/radeon: IGP clean up register and magic numbers. drm/rs690: set base 2 to 0. drm/rs690: set all of gart base address. radeon: add production microcode from AMD drm: pcigart use proper pci map interfaces. drm: the sg alloc ioctl should write back the handle to userspace ... | 20 June 2008, 19:38:18 UTC |
| fdfe6d3 | Linus Torvalds | 20 June 2008, 19:37:55 UTC | Merge branch 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: [agp]: fixup chipset flush for new Intel G4x. agp: brown paper bag patch - put back the two lines it took out. | 20 June 2008, 19:37:55 UTC |
| 1f1e2ce | Linus Torvalds | 20 June 2008, 19:37:13 UTC | Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression rcupreempt: remove export of rcu_batches_completed_bh cpuset: limit the input of cpuset.sched_relax_domain_level | 20 June 2008, 19:37:13 UTC |
| e570dc2 | Linus Torvalds | 20 June 2008, 19:36:55 UTC | Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched, delay accounting: fix incorrect delay time when constantly waiting on runqueue sched: CPU hotplug events must not destroy scheduler domains created by the cpusets sched: rt-group: fix RR buglet sched: rt-group: heirarchy aware throttle sched: rt-group: fix hierarchy sched: NULL pointer dereference while setting sched_rt_period_us sched: fix defined-but-unused warning | 20 June 2008, 19:36:55 UTC |
| b1ae8d3 | Linus Torvalds | 20 June 2008, 19:36:38 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, geode: add a VSA2 ID for General Software x86: use BOOTMEM_EXCLUSIVE on 32-bit x86, 32-bit: fix boot failure on TSC-less processors x86: fix NULL pointer deref in __switch_to x86: set PAE PHYSICAL_MASK_SHIFT to 44 bits. | 20 June 2008, 19:36:38 UTC |
| 5501792 | Linus Torvalds | 20 June 2008, 19:34:43 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue. Blackfin arch: fix typo error in bf548 serial header file | 20 June 2008, 19:34:43 UTC |
| b4eea67 | Linus Torvalds | 20 June 2008, 19:31:03 UTC | Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: sis can't do PMP ata_piix: add TECRA M4 to broken suspend list LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver sata_mv: warn on PIO with multiple DRQs sata_mv: enable async_notify for 60x1 Rev.C0 and higher libata: don't check whether to use DMA or not for no data commands ahci: jmb361 has only one port | 20 June 2008, 19:31:03 UTC |
| 1f6ef23 | Linus Torvalds | 20 June 2008, 19:19:28 UTC | [watchdog] hpwdt: fix use of inline assembly The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken, and included all the function prologue and epilogue stuff, even though it was itself then inside a C function where the compiler would add its own prologue and epilogue on top of it all. This then just _happened_ to work if you had exactly the right compiler version and exactly the right compiler flags, so that gcc just happened to not create any prologue at all (the gcc-generated epilogue wouldn't matter, since it would never be reached). But the more proper way to fix it is to simply not do this. Move the inline asm to the top level, with no surrounding function at all (the better alternative would be to remove the prologue and make it actually use proper description of the arguments to the inline asm, but that's a bigger change than the one I'm willing to make right now). Tested-by: S.Çağlar Onur <caglar@pardus.org.tr> Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 June 2008, 19:25:34 UTC |
| e0c6d97 | Cliff Wickman | 20 June 2008, 19:02:00 UTC | [IA64] SN2: security hole in sn2_ptc_proc_write Security hole in sn2_ptc_proc_write It is possible to overrun a buffer with a write to this /proc file. Signed-off-by: Cliff Wickman <cpw@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com> | 20 June 2008, 19:02:00 UTC |
| ac16236 | Ben Dooks | 20 June 2008, 18:53:35 UTC | BAST: Remove old IDE driver Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 20 June 2008, 18:53:35 UTC |
| a49c06b | Christophe Niclaes | 20 June 2008, 18:53:34 UTC | pcmcia ide kingston compactflash's have a new manufacturer id Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID, In their new CF cards, they use a new one. Let's the ide subsystem recognize CF cards with the new id. Signed-off-by: Christophe Niclaes <cniclaes@develtech.com> Acked-by: Philippe De Muyter <phdm@macqel.be> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 20 June 2008, 18:53:34 UTC |
| a17bf22 | Kristoffer Ericson | 20 June 2008, 18:53:34 UTC | pcmcia: add another pata/ide ID Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters <w1ll14@gmail.com> Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 20 June 2008, 18:53:34 UTC |
| 74e2338 | Matt Reimer | 20 June 2008, 18:53:34 UTC | pcmcia: add an pata/ide ID Add an id for: product info: "M-Systems", "CF300", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer <mreimer@vpop.net> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 20 June 2008, 18:53:34 UTC |
| f54feaf | Bartlomiej Zolnierkiewicz | 20 June 2008, 18:53:33 UTC | ide: increase timeout in wait_drive_not_busy() Some ATAPI devices take longer than the current max timeout value to become ready (i.e. TEAC DV-W28ECW takes 6 ms) so increase the timeout value to 10 ms. This fixes kernel.org bugzilla bug #10887: http://bugzilla.kernel.org/show_bug.cgi?id=10887 Reported-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 20 June 2008, 18:53:33 UTC |
| ce42a54 | Sergei Shtylyov | 20 June 2008, 18:53:32 UTC | palm_bk3710: fix resource management The driver expected a *virtual* address in the IDE platform device's memory resource and didn't request the memory region for the register block. Fix this taking into account the fact that DaVinci SoC devices are fixed-mapped to the virtual memory early and we can get their virtual addresses using IO_ADDRESS() macro, not having to call ioremap()... While at it, also do some cosmetic changes... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 20 June 2008, 18:53:32 UTC |
| 89f5b7d | Linus Torvalds | 20 June 2008, 18:18:25 UTC | Reinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP KAMEZAWA Hiroyuki and Oleg Nesterov point out that since the commit 557ed1fa2620dc119adb86b34c614e152a629a80 ("remove ZERO_PAGE") removed the ZERO_PAGE from the VM mappings, any users of get_user_pages() will generally now populate the VM with real empty pages needlessly. We used to get the ZERO_PAGE when we did the "handle_mm_fault()", but since fault handling no longer uses ZERO_PAGE for new anonymous pages, we now need to handle that special case in follow_page() instead. In particular, the removal of ZERO_PAGE effectively removed the core file writing optimization where we would skip writing pages that had not been populated at all, and increased memory pressure a lot by allocating all those useless newly zeroed pages. This reinstates the optimization by making the unmapped PTE case the same as for a non-existent page table, which already did this correctly. While at it, this also fixes the XIP case for follow_page(), where the caller could not differentiate between the case of a page that simply could not be used (because it had no "struct page" associated with it) and a page that just wasn't mapped. We do that by simply returning an error pointer for pages that could not be turned into a "struct page *". The error is arbitrarily picked to be EFAULT, since that was what get_user_pages() already used for the equivalent IO-mapped page case. [ Also removed an impossible test for pte_offset_map_lock() failing: that's not how that function works ] Acked-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Nick Piggin <npiggin@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 20 June 2008, 18:18:25 UTC |
| 2856922 | Frederic Bohe | 20 June 2008, 15:48:48 UTC | Ext4: Fix online resize block group descriptor corruption This is the patch for the group descriptor table corruption during online resize pointed out by Theodore Tso. The problem was caused by the fact that the ext4 group descriptor can be either 32 or 64 bytes long. Only the 64 bytes structure was taken into account. Signed-off-by: Frederic Bohe <frederic.bohe@bull.net> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> | 20 June 2008, 15:48:48 UTC |
| 5a87f7f | Len Brown | 20 June 2008, 06:47:16 UTC | Merge branch 'bugzilla-9761' into release | 20 June 2008, 06:47:16 UTC |
| 7b09f27 | Len Brown | 20 June 2008, 06:45:05 UTC | Merge branch 'bugzilla-10695' into release | 20 June 2008, 06:45:05 UTC |
| 858a368 | Dave Airlie | 20 June 2008, 05:42:38 UTC | drm: only trust core drm ioctls - driver ioctls are a mess. So driver ioctls need a full auditing before we can make this change. Signed-off-by: Dave Airlie <airlied@redhat.com> | 20 June 2008, 05:42:38 UTC |
| d3adbc0 | Zhenyu Wang | 20 June 2008, 02:12:56 UTC | drm/i915: add support for Intel series 4 chipsets. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 20 June 2008, 02:12:56 UTC |
| 7d15ddf | Zhenyu Wang | 20 June 2008, 01:48:06 UTC | [agp]: fixup chipset flush for new Intel G4x. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 20 June 2008, 01:48:06 UTC |
| f630e43 | YOSHIFUJI Hideaki | 19 June 2008, 23:33:57 UTC | ipv6: Drop packets for loopback address from outside of the box. [ Based upon original report and patch by Karsten Keil. Karsten has verified that this fixes the TAHI test case "ICMPv6 test v6LC.5.1.2 Part F". -DaveM ] Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 June 2008, 23:33:57 UTC |
| aea7427 | Shan Wei | 19 June 2008, 23:29:39 UTC | ipv6: Remove options header when setsockopt's optlen is 0 Remove the sticky Hop-by-Hop options header by calling setsockopt() for IPV6_HOPOPTS with a zero option length, per RFC3542. Routing header and Destination options header does the same as Hop-by-Hop options header. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 June 2008, 23:29:39 UTC |
| ffe6e1d | Jordan Crouse | 18 June 2008, 17:34:38 UTC | x86, geode: add a VSA2 ID for General Software General Software writes their own VSA2 module for their version of the Geode BIOS, which returns a different ID then the standard VSA2. This was causing the framebuffer driver to break for most GSW boards. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: tglx@linutronix.de Cc: linux-geode@lists.infradead.org Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 June 2008, 12:19:03 UTC |
| d4abc23 | Bharath Ravi | 16 June 2008, 09:41:01 UTC | sched, delay accounting: fix incorrect delay time when constantly waiting on runqueue This patch corrects the incorrect value of per process run-queue wait time reported by delay statistics. The anomaly was due to the following reason. When a process leaves the CPU and immediately starts waiting for CPU on the runqueue (which means it remains in the TASK_RUNNABLE state), the time of re-entry into the run-queue is never recorded. Due to this, the waiting time on the runqueue from this point of re-entry upto the next time it hits the CPU is not accounted for. This is solved by recording the time of re-entry of a process leaving the CPU in the sched_info_depart() function IF the process will go back to waiting on the run-queue. This IF condition is verified by checking whether the process is still in the TASK_RUNNABLE state. The patch was tested on 2.6.26-rc6 using two simple CPU hog programs. The values noted prior to the fix did not account for the time spent on the runqueue waiting. After the fix, the correct values were reported back to user space. Signed-off-by: Bharath Ravi <bharathravi1@gmail.com> Signed-off-by: Madhava K R <madhavakr@gmail.com> Cc: dhaval@linux.vnet.ibm.com Cc: vatsa@in.ibm.com Cc: balbir@in.ibm.com Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 June 2008, 12:15:28 UTC |
| bcccc3a | David Brownell | 04 May 2008, 02:19:16 UTC | hwmon: (lm75) sensor reading bugfix LM75 sensor reading bugfix: never save error status as valid sensor output. This could be improved, but at least this prevents certain rude failure modes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> | 19 June 2008, 10:50:32 UTC |
| b3aeab0 | Hans de Goede | 23 May 2008, 14:10:41 UTC | hwmon: (abituguru3) update driver detection It has been reported that the abituguru3 driver fails to load after a BIOS update. This patch fixes this by loosening the detection routine so that it will work after the BIOS update too. To compensate for the now very loose detection an additional check is added on the DMI Base Board vendor string to make sure we only load on Abit motherboards, this is the same as the check in the abituguru (1 / 2) driver. Signed-of-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> | 19 June 2008, 10:50:32 UTC |
| 25845c2 | Marc Hulsman | 08 June 2008, 14:59:41 UTC | hwmon: (w83791d) new maintainer Signed-off-by: Charles Spirakis <bezaur@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> | 19 June 2008, 10:50:31 UTC |
| 1604e78 | Hans de Goede | 26 February 2008, 18:34:48 UTC | hwmon: (abituguru3) Identify Abit AW8D board as such This patch identifies the Abit AW8D board as such, and adds support for its aux5 fan connector Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> | 19 June 2008, 10:50:31 UTC |
| 125ff80 | Jean Delvare | 23 February 2008, 09:57:53 UTC | hwmon: Update the sysfs interface documentation * Document the characteristics of libsensors 3.0.0 and 3.0.1. * The sysfs interface is no longer subject to changes. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> | 19 June 2008, 10:50:31 UTC |
| ed4ec81 | Jean Delvare | 26 April 2008, 14:34:26 UTC | hwmon: (adt7473) Initialize max_duty_at_overheat before use data->max_duty_at_overheat is not updated in adt7473_update_device, so it might be used before it is initialized (if the user reads from sysfs file max_duty_at_crit before writing to it.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> | 19 June 2008, 10:50:31 UTC |
| d38b149 | Jean Delvare | 03 April 2008, 08:40:39 UTC | hwmon: (lm85) Fix function RANGE_TO_REG() Function RANGE_TO_REG() is broken. For a requested range of 2000 (2 degrees C), it will return an index value of 15, i.e. 80.0 degrees C, instead of the expected index value of 0. All other values are handled properly, just 2000 isn't. The bug was introduced back in November 2004 by this patch: http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=1c28d80f1992240373099d863e4996cdd5d646d0 While this can be fixed easily with the current code, I'd rather rewrite the whole function in a way which is more obviously correct. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Justin Thiessen <jthiessen@penguincomputing.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> | 19 June 2008, 10:50:31 UTC |
| f30ac0c | Sonic Zhang | 19 June 2008, 09:46:39 UTC | Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue. This allows other threads to run when the serial driver polls the CTS PIN in a loop. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> | 19 June 2008, 09:46:39 UTC |
| ec64b6c | Sonic Zhang | 19 June 2008, 09:07:15 UTC | Blackfin arch: fix typo error in bf548 serial header file Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> | 19 June 2008, 09:07:15 UTC |
| d3942cf | Bernhard Walle | 08 June 2008, 14:16:07 UTC | x86: use BOOTMEM_EXCLUSIVE on 32-bit This patch uses the BOOTMEM_EXCLUSIVE for crashkernel reservation also for i386 and prints a error message on failure. The patch is still for 2.6.26 since it is only bug fixing. The unification of reserve_crashkernel() between i386 and x86_64 should be done for 2.6.27. Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> | 19 June 2008, 08:08:48 UTC |
| df17b1d | Mikael Pettersson | 15 June 2008, 00:19:56 UTC | x86, 32-bit: fix boot failure on TSC-less processors Booting 2.6.26-rc6 on my 486 DX/4 fails with a "BUG: Int 6" (invalid opcode) and a kernel halt immediately after the kernel has been uncompressed. The BUG shows EIP pointing to an rdtsc instruction in native_read_tsc(), invoked from native_sched_clock(). (This error occurs so early that not even the serial console can capture it.) A bisection showed that this bug first occurs in 2.6.26-rc3-git7, via commit 9ccc906c97e34fd91dc6aaf5b69b52d824386910: >x86: distangle user disabled TSC from unstable > >tsc_enabled is set to 0 from the command line switch "notsc" and from >the mark_tsc_unstable code. Seperate those functionalities and replace >tsc_enable with tsc_disable. This makes also the native_sched_clock() >decision when to use TSC understandable. > >Preparatory patch to solve the sched_clock() issue on 32 bit. > >Signed-off-by: Thomas Gleixner <tglx@linutronix.de> The core reason for this bug is that native_sched_clock() gets called before tsc_init(). Before the commit above, tsc_32.c used a "tsc_enabled" variable which defaulted to 0 == disabled, and which only got enabled late in tsc_init(). Thus early calls to native_sched_clock() would skip the TSC and use jiffies instead. After the commit above, tsc_32.c uses a "tsc_disabled" variable which defaults to 0, meaning that the TSC is Ok to use. Early calls to native_sched_clock() now erroneously try to use the TSC on !cpu_has_tsc processors, leading to invalid opcode exceptions. My proposed fix is to initialise tsc_disabled to a "soft disabled" state distinct from the hard disabled state set up by the "notsc" kernel option. This fixes the native_sched_clock() problem. It also allows tsc_init() to be simplified: instead of setting tsc_disabled = 1 on every error return, we just set tsc_disabled = 0 once when all checks have succeeded. I've verified that this lets my 486 boot again. I've also verified that a Core2 machine still uses the TSC as clocksource after the patch. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 June 2008, 08:08:47 UTC |
| 75118a8 | Suresh Siddha | 13 June 2008, 22:47:12 UTC | x86: fix NULL pointer deref in __switch_to Patrick McHardy reported a crash: > > I get this oops once a day, its apparently triggered by something > > run by cron, but the process is a different one each time. > > > > Kernel is -git from yesterday shortly before the -rc6 release > > (last commit is the usb-2.6 merge, the x86 patches are missing), > > .config is attached. > > > > I'll retry with current -git, but the patches that have gone in > > since I last updated don't look related. > > > > [62060.043009] BUG: unable to handle kernel NULL pointer dereference at > > 000001ff > > [62060.043009] IP: [<c0102a9b>] __switch_to+0x2f/0x118 > > [62060.043009] *pde = 00000000 > > [62060.043009] Oops: 0002 [#1] PREEMPT Vegard Nossum analyzed it: > This decodes to > > 0: 0f ae 00 fxsave (%eax) > > so it's related to the floating-point context. This is the exact > location of the crash: > > $ addr2line -e arch/x86/kernel/process_32.o -i ab0 > include/asm/i387.h:232 > include/asm/i387.h:262 > arch/x86/kernel/process_32.c:595 > > ...so it looks like prev_task->thread.xstate->fxsave has become NULL. > Or maybe it never had any other value. Somehow (as described below) TS_USEDFPU is set but the fpu is not allocated or freed. Another possible FPU pre-emption issue with the sleazy FPU optimization which was benign before but not so anymore, with the dynamic FPU allocation patch. New task is getting exec'd and it is prempted at the below point. flush_thread() { ... /* * Forget coprocessor state.. */ clear_fpu(tsk); <----- Preemption point clear_used_math(); ... } Now when it context switches in again, as the used_math() is still set and fpu_counter can be > 5, we will do a math_state_restore() which sets the task's TS_USEDFPU. After it continues from the above preemption point it does clear_used_math() and much later free_thread_xstate(). Now, at the next context switch, it is quite possible that xstate is null, used_math() is not set and TS_USEDFPU is still set. This will trigger unlazy_fpu() causing kernel oops. Fix this by clearing tsk's fpu_counter before clearing task's fpu. Reported-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 June 2008, 08:08:45 UTC |
| ad524d4 | Jeremy Fitzhardinge | 06 June 2008, 09:21:39 UTC | x86: set PAE PHYSICAL_MASK_SHIFT to 44 bits. When a 64-bit x86 processor runs in 32-bit PAE mode, a pte can potentially have the same number of physical address bits as the 64-bit host ("Enhanced Legacy PAE Paging"). This means, in theory, we could have up to 52 bits of physical address in a pte. The 32-bit kernel uses a 32-bit unsigned long to represent a pfn. This means that it can only represent physical addresses up to 32+12=44 bits wide. Rather than widening pfns everywhere, just set 2^44 as the Linux x86_32-PAE architectural limit for physical address size. This is a bugfix for two cases: 1. running a 32-bit PAE kernel on a machine with more than 64GB RAM. 2. running a 32-bit PAE Xen guest on a host machine with more than 64GB RAM In both cases, a pte could need to have more than 36 bits of physical, and masking it to 36-bits will cause fairly severe havoc. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 June 2008, 08:08:44 UTC |
| 9c106c1 | Jason Wessel | 27 May 2008, 17:23:29 UTC | softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression The touch_nmi_watchdog() routine on x86 ultimately calls touch_softlockup_watchdog(). The problem is that to touch the softlockup watchdog, the cpu_clock code has to be called which could involve multiple cpu locks and can lead to a hard hang if one of the locks is held by a processor that is not going to return anytime soon (such as could be the case with kgdb or perhaps even with some other kind of exception). This patch causes the public version of the touch_softlockup_watchdog() to defer the cpu clock access to a later point. The test case for this problem is to use the following kernel config options: CONFIG_KGDB_TESTS=y CONFIG_KGDB_TESTS_ON_BOOT=y CONFIG_KGDB_TESTS_BOOT_STRING="V1F100I100000" It should be noted that kgdb test suite and these options were not available until 2.6.26-rc2, so it was necessary to patch the kgdb test suite during the bisection. I would consider this patch a regression fix because the problem first appeared in commit 27ec4407790d075c325e1f4da0a19c56953cce23 when some logic was added to try to periodically sync the clocks. It was possible to work around this particular problem by simply not performing the sync anytime the system was in a critical context. This was ok until commit 3e51f33fcc7f55e6df25d15b55ed10c8b4da84cd, which added config option CONFIG_HAVE_UNSTABLE_SCHED_CLOCK and some multi-cpu locks to sync the clocks. It became clear that accessing this code from an nmi was the source of the lockups. Avoiding the access to the low level clock code from an code inside the NMI processing also fixed the problem with the 27ec44... commit. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 June 2008, 07:45:38 UTC |
| afd3800 | Steven Rostedt | 22 May 2008, 18:18:17 UTC | rcupreempt: remove export of rcu_batches_completed_bh In rcupreempt, rcu_batches_completed_bh is defined as a static inline in the header file. This does not need to be exported, and not only that, this breaks my PPC build. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: paulus@samba.org Cc: linuxppc-dev@ozlabs.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 19 June 2008, 07:45:37 UTC |
| 30e0e17 | Li Zefan | 13 May 2008, 02:27:17 UTC | cpuset: limit the input of cpuset.sched_relax_domain_level We allow the inputs to be [-1 ... SD_LV_MAX), and return -EINVAL for inputs outside this range. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Acked-by: Paul Jackson <pj@sgi.com> Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 19 June 2008, 07:45:36 UTC |
| d819c49 | Ingo Molnar | 19 June 2008, 07:37:31 UTC | Merge branch 'linus' into sched/urgent | 19 June 2008, 07:37:31 UTC |
| f18f982 | Max Krasnyansky | 29 May 2008, 18:17:01 UTC | sched: CPU hotplug events must not destroy scheduler domains created by the cpusets First issue is not related to the cpusets. We're simply leaking doms_cur. It's allocated in arch_init_sched_domains() which is called for every hotplug event. So we just keep reallocation doms_cur without freeing it. I introduced free_sched_domains() function that cleans things up. Second issue is that sched domains created by the cpusets are completely destroyed by the CPU hotplug events. For all CPU hotplug events scheduler attaches all CPUs to the NULL domain and then puts them all into the single domain thereby destroying domains created by the cpusets (partition_sched_domains). The solution is simple, when cpusets are enabled scheduler should not create default domain and instead let cpusets do that. Which is exactly what the patch does. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Cc: pj@sgi.com Cc: menage@google.com Cc: rostedt@goodmis.org Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 19 June 2008, 07:14:51 UTC |
| 15a8641 | Peter Zijlstra | 19 June 2008, 07:06:59 UTC | sched: rt-group: fix RR buglet In tick_task_rt() we first call update_curr_rt() which can dequeue a runqueue due to it running out of runtime, and then we try to requeue it, of it also having exhausted its RR quota. Obviously requeueing something that is no longer on the runqueue will not have the expected result. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Daniel K. <dk@uw.no> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 June 2008, 07:06:59 UTC |
| ad2a3f1 | Peter Zijlstra | 19 June 2008, 07:06:57 UTC | sched: rt-group: heirarchy aware throttle The bandwidth throttle code dequeues a group when it runs out of quota, and re-queues it once the period rolls over and the quota gets refreshed. Sadly it failed to take the hierarchy into consideration. Share more of the enqueue/dequeue code with regular task opterations. Also, some operations like sched_setscheduler() can dequeue/enqueue tasks that are in throttled runqueues, we should not inadvertly re-enqueue empty runqueues so check for that. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Daniel K. <dk@uw.no> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 June 2008, 07:06:57 UTC |
| 7ea5661 | Peter Zijlstra | 19 June 2008, 07:06:56 UTC | sched: rt-group: fix hierarchy Don't re-set the entity's runqueue to the wrong rq after we've set it to the right one. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Daniel K. <dk@uw.no> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 June 2008, 07:06:56 UTC |
| 49307fd | Dario Faggioli | 18 June 2008, 07:18:38 UTC | sched: NULL pointer dereference while setting sched_rt_period_us When CONFIG_RT_GROUP_SCHED and CONFIG_CGROUP_SCHED are enabled, with: echo 10000 > /proc/sys/kernel/sched_rt_period_us We get this: BUG: unable to handle kernel NULL pointer dereference at 0000008c [ 947.682233] IP: [<c0216b72>] __rt_schedulable+0x12/0x160 [ 947.683123] *pde = 00000000=20 [ 947.683782] Oops: 0000 [#1] [ 947.684307] Modules linked in: [ 947.684308] [ 947.684308] Pid: 2359, comm: bash Not tainted (2.6.26-rc6 #8) [ 947.684308] EIP: 0060:[<c0216b72>] EFLAGS: 00000246 CPU: 0 [ 947.684308] EIP is at __rt_schedulable+0x12/0x160 [ 947.684308] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001 [ 947.684308] ESI: c0521db4 EDI: 00000001 EBP: c6cc9f00 ESP: c6cc9ed0 [ 947.684308] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 947.684308] Process bash (pid: 2359, tiÆcc8000 taskÇa54f00=20 task.tiÆcc8000) [ 947.684308] Stack: c0222790 00000000 080f8c08 c0521db4 c6cc9f00 00000001 00000000 00000000 [ 947.684308] c6cc9f9c 00000000 c0521db4 00000001 c6cc9f28 c0216d40 00000000 00000000 [ 947.684308] c6cc9f9c 000f4240 000e7ef0 ffffffff c0521db4 c79dfb60 c6cc9f58 c02af2cc [ 947.684308] Call Trace: [ 947.684308] [<c0222790>] ? do_proc_dointvec_conv+0x0/0x50 [ 947.684308] [<c0216d40>] ? sched_rt_handler+0x80/0x110 [ 947.684308] [<c02af2cc>] ? proc_sys_call_handler+0x9c/0xb0 [ 947.684308] [<c02af2fa>] ? proc_sys_write+0x1a/0x20 [ 947.684308] [<c0273c36>] ? vfs_write+0x96/0x160 [ 947.684308] [<c02af2e0>] ? proc_sys_write+0x0/0x20 [ 947.684308] [<c027423d>] ? sys_write+0x3d/0x70 [ 947.684308] [<c0202ef5>] ? sysenter_past_esp+0x6a/0x91 [ 947.684308] ======================= [ 947.684308] Code: 24 04 e8 62 b1 0e 00 89 c7 89 f8 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90 55 89 e5 57 56 53 83 ec 24 89 45 ec 89 55 e4 89 4d e8 <8b> b8 8c 00 00 00 85 ff 0f 84 c9 00 00 00 8b 57 24 39 55 e8 8b [ 947.684308] EIP: [<c0216b72>] __rt_schedulable+0x12/0x160 SS:ESP 0068:c6cc9ed0 We think the following patch solves the issue. Signed-off-by: Dario Faggioli <raistlin@linux.it> Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 19 June 2008, 07:06:54 UTC |
| 9bedbcb | Dave Airlie | 19 June 2008, 04:57:31 UTC | agp: brown paper bag patch - put back two lines that got lost Commit 62c96b9d0917894c164aa3e474a3ff3bca1554ae ("agp/intel: cleanup some serious whitespace badness") didn't just fix whitespace. It also lost two lines. Noticed by Linus. No more whitespace diffs for me. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 June 2008, 05:12:50 UTC |
| 0e480e5 | Dave Airlie | 19 June 2008, 04:57:31 UTC | agp: brown paper bag patch - put back the two lines it took out. no more whitespace diffs for me. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 04:57:31 UTC |
| 3506ba7 | Linus Torvalds | 19 June 2008, 04:52:35 UTC | Merge branch 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp/intel: cleanup some serious whitespace badness [AGP] intel_agp: Add support for Intel 4 series chipsets [AGP] intel_agp: extra stolen mem size available for IGD_GM chipset agp: more boolean conversions. drivers/char/agp - use bool agp: two-stage page destruction issue agp/via: fixup pci ids | 19 June 2008, 04:52:35 UTC |
| 62c96b9 | Dave Airlie | 19 June 2008, 04:27:53 UTC | agp/intel: cleanup some serious whitespace badness Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 04:27:53 UTC |
| 25ce77a | Zhenyu Wang | 19 June 2008, 04:17:58 UTC | [AGP] intel_agp: Add support for Intel 4 series chipsets Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 04:17:58 UTC |
| 598d144 | Zhenyu Wang | 19 June 2008, 04:00:37 UTC | [AGP] intel_agp: extra stolen mem size available for IGD_GM chipset This adds missing stolen memory size detect for IGD_GM, be sure to detect right size as current X intel driver (2.3.2) which has already worked out. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 04:00:37 UTC |
| 21efa2b | Dave Airlie | 19 June 2008, 03:01:58 UTC | drm/radeon: add hier-z registers for r300 and r500 chipsets | 19 June 2008, 03:01:58 UTC |
| 5e35eff | Alex Deucher | 19 June 2008, 02:39:23 UTC | drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT According to the hw guys, you should use DSTCACHE_CTLSTAT to flush the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 02:39:23 UTC |
| 5cfb695 | Alex Deucher | 19 June 2008, 02:38:29 UTC | drm/radeon: switch IGP gart to use radeon_write_agp_base() Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 02:38:29 UTC |
| 7ecabc5 | Dennis Kasprzyk | 19 June 2008, 02:36:55 UTC | drm/radeon: Restore sw interrupt on resume Fixes performance drop after suspend/resume on some systems. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 02:36:55 UTC |
| 70b13d5 | Dave Airlie | 19 June 2008, 01:40:44 UTC | drm/r500: add support for AGP based cards. AGP registers weren't programmed properly for r500 cards. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:40:44 UTC |
| 9156cf0 | Roland Scheidegger | 19 June 2008, 01:36:04 UTC | drm/radeon: fix texture uploads with large 3d textures (bug 13980) Texture uploads could hit the blitter coordinate limit, adjust the texture offset when uploading the pieces. Make sure to check the end address of the upload too. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:36:04 UTC |
| c0beb2a | Dave Airlie | 28 May 2008, 03:52:28 UTC | drm/radeon: add initial r500 support. This contains all the command buffer processing for the r500 cards. It doesn't yet contain vblank support. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:40 UTC |
| 5b92c40 | Alex Deucher | 28 May 2008, 01:57:40 UTC | drm/radeon: init pipe setup in kernel code. This inits the card pipes in the kernel and lets userspace getparam the correct setup. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:40 UTC |
| d396db3 | Alex Deucher | 28 May 2008, 01:54:06 UTC | drm/radeon: fixup radeon_do_engine_reset Cleanup do engine reset for different chip families. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:39 UTC |
| 259434a | Alex Deucher | 28 May 2008, 01:51:12 UTC | drm/radeon: fix pixcache and purge/cache flushing registers Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:39 UTC |
| d7463eb | Alex Deucher | 28 May 2008, 01:46:36 UTC | drm/radeon: write AGP_BASE_2 on chips that support it. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:39 UTC |
| 45e5190 | Alex Deucher | 28 May 2008, 03:28:59 UTC | drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support We only support RS480 (AMD based IGP) at the moment not RS400 (Intel based IGP) ones. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:39 UTC |
| 2735977 | Alex Deucher | 28 May 2008, 02:54:16 UTC | drm/radeon: IGP clean up register and magic numbers. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:39 UTC |
| 3722bfc | Dave Airlie | 28 May 2008, 01:28:27 UTC | drm/rs690: set base 2 to 0. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:39 UTC |
| fa0d71b | Dave Airlie | 28 May 2008, 01:27:01 UTC | drm/rs690: set all of gart base address. Docs state bits 4-11 maps to bits 32-39 of the 40-bit range Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:39 UTC |
| 9f18409 | Alex Deucher | 28 May 2008, 01:21:25 UTC | radeon: add production microcode from AMD This adds production microcode for r100->r500 from AMD. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:38 UTC |
| 7ec700f | Dave Airlie | 19 June 2008, 01:27:23 UTC | drm: pcigart use proper pci map interfaces. Switch to using more correct pci dma mapping interfaces. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 01:27:23 UTC |
| 9a3b103 | Tejun Heo | 19 June 2008, 00:56:58 UTC | ahci: sis can't do PMP From: Piter PUNK <piterpunk@slackware.com> SiS AHCIs say they can do PMP but can't and fail detection if SRST w/ pmp==15 is used. Turn off PMP support. tj: added patch description, adapted patch to #upstream-fixes and renamed board_ahci_sis to board_ahci_nopmp. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 19 June 2008, 00:56:58 UTC |
| 9516b03 | Dave Airlie | 19 June 2008, 00:42:17 UTC | agp: more boolean conversions. Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 00:42:17 UTC |
| 040dee5 | Tejun Heo | 13 June 2008, 09:05:02 UTC | ata_piix: add TECRA M4 to broken suspend list TOSHIBA also used "TECRA M4" in additon to "Tecra M4", add it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 19 June 2008, 00:28:17 UTC |
| cc18e0f | Ben Dooks | 16 June 2008, 11:16:26 UTC | LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver Add HAVE_PATA_PLATFORM to select the pata platform driver to ensure that we do not end up with a long 'depends on' list when other users of this driver turn up. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 19 June 2008, 00:28:00 UTC |
| c6112bd | Mark Lord | 18 June 2008, 16:13:02 UTC | sata_mv: warn on PIO with multiple DRQs Chip errata sometimes prevents reliable use of PIO commands which involve more than a single DRQ (data request). In normal operation, libata should not generate such PIO commands (uses DMA instead), but they could be sent in via SG_IO from userspace. A full workaround might be to break up such commands into sequences of single DRQ ones, but that's just way too complex for something that doesn't normally happen in real life. So, allow the attempt (it often works, despite the errata), but log the event for reference when somebody screams. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 19 June 2008, 00:27:58 UTC |
| 3bd0a70 | Mark Lord | 18 June 2008, 16:11:16 UTC | sata_mv: enable async_notify for 60x1 Rev.C0 and higher The early chipsets cannot safely handle Async Notification (AN), but 6041/6081 chip revision "C0" (and newer) can handle it. So allow AN for "C0" and higher. This enables use of hotplug on PMP ports for the 6041/6081 PCI Rev.9 chips. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 19 June 2008, 00:27:55 UTC |
| 5895ef9 | Tejun Heo | 17 June 2008, 03:36:26 UTC | libata: don't check whether to use DMA or not for no data commands There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 19 June 2008, 00:27:49 UTC |
| d799e08 | Tejun Heo | 17 June 2008, 03:46:30 UTC | ahci: jmb361 has only one port JMB361 has only one port but reports it has two causing longish probe failure on the second one. Quirk it. Reported by Gajo Petrovic in bz 10911. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Gajo Petrovic <gajo01@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 19 June 2008, 00:27:45 UTC |
| c725801 | Joe Perches | 26 March 2008, 21:10:02 UTC | drivers/char/agp - use bool Use boolean in AGP instead of having own TRUE/FALSE -- Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 19 June 2008, 00:04:20 UTC |
| da503fa | Jan Beulich | 18 June 2008, 08:28:00 UTC | agp: two-stage page destruction issue besides it apparently being useful only in 2.6.24 (the changes in 2.6.25 really mean that it could be converted back to a single-stage mechanism), I'm seeing an issue in Xen Dom0 kernels, which is caused by the calling of gart_to_virt() in the second stage invocations of the destroy function. I think that besides this being a real issue with Xen (where unmap_page_from_agp() is not just a page table attribute change), this also is invalid from a theoretical perspective: One should not assume that gart_to_virt() is still valid after unmapping a page. So minimally (keeping the 2-stage mechanism) a patch like the one below would be needed. Jan Signed-off-by: Dave Airlie <airlied@redhat.com> | 18 June 2008, 23:56:16 UTC |
| dcd981a | Greg KH | 18 June 2008, 23:52:26 UTC | agp/via: fixup pci ids add a new PCI ID and remove an old dodgy one, include the explaination in the commented code so nobody readds later. (davej also sent the pci id addition). Signed-off-by: Dave Airlie <airlied@redhat.com> | 18 June 2008, 23:52:26 UTC |
