Revision 140d0b2108faebc77c6523296e211e509cb9f5f9 authored by Linus Torvalds on 05 August 2011, 05:35:59 UTC, committed by Linus Torvalds on 05 August 2011, 05:35:59 UTC
This isn't really critical any more, since other patches (commit 298507d4d2cf: "shm: optimize exit_shm()") have caused us to not actually need to touch the rw_mutex unless there are actual shm segments associated with the namespace, but we really should do tne shm_init_ns() earlier than we do now. This, together with commit 288d5abec831 ("Boot up with usermodehelper disabled") will mean that we really do initialize the initial ipc namespace data structure before we run any tasks. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent 24f0eed
core_lca.c
/*
* linux/arch/alpha/kernel/core_lca.c
*
* Written by David Mosberger (davidm@cs.arizona.edu) with some code
* taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
* bios code.
*
* Code common to all LCA core logic chips.
*/
#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/core_lca.h>
#undef __EXTERN_INLINE
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <asm/ptrace.h>
#include <asm/irq_regs.h>
#include <asm/smp.h>
#include "proto.h"
#include "pci_impl.h"
/*
* BIOS32-style PCI interface:
*/
/*
* Machine check reasons. Defined according to PALcode sources
* (osf.h and platform.h).
*/
#define MCHK_K_TPERR 0x0080
#define MCHK_K_TCPERR 0x0082
#define MCHK_K_HERR 0x0084
#define MCHK_K_ECC_C 0x0086
#define MCHK_K_ECC_NC 0x0088
#define MCHK_K_UNKNOWN 0x008A
#define MCHK_K_CACKSOFT 0x008C
#define MCHK_K_BUGCHECK 0x008E
#define MCHK_K_OS_BUGCHECK 0x0090
#define MCHK_K_DCPERR 0x0092
#define MCHK_K_ICPERR 0x0094
/*
* Platform-specific machine-check reasons:
*/
#define MCHK_K_SIO_SERR 0x204 /* all platforms so far */
#define MCHK_K_SIO_IOCHK 0x206 /* all platforms so far */
#define MCHK_K_DCSR 0x208 /* all but Noname */
/*
* Given a bus, device, and function number, compute resulting
* configuration space address and setup the LCA_IOC_CONF register
* accordingly. It is therefore not safe to have concurrent
* invocations to configuration space access routines, but there
* really shouldn't be any need for this.
*
* Type 0:
*
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 31:11 Device select bit.
* 10:8 Function number
* 7:2 Register number
*
* Type 1:
*
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 31:24 reserved
* 23:16 bus number (8 bits = 128 possible buses)
* 15:11 Device number (5 bits)
* 10:8 function number
* 7:2 register number
*
* Notes:
* The function number selects which function of a multi-function device
* (e.g., SCSI and Ethernet).
*
* The register selects a DWORD (32 bit) register offset. Hence it
* doesn't get shifted by 2 bits as we want to "drop" the bottom two
* bits.
*/
static int
mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
unsigned long *pci_addr)
{
unsigned long addr;
u8 bus = pbus->number;
if (bus == 0) {
int device = device_fn >> 3;
int func = device_fn & 0x7;
/* Type 0 configuration cycle. */
if (device > 12) {
return -1;
}
*(vulp)LCA_IOC_CONF = 0;
addr = (1 << (11 + device)) | (func << 8) | where;
} else {
/* Type 1 configuration cycle. */
*(vulp)LCA_IOC_CONF = 1;
addr = (bus << 16) | (device_fn << 8) | where;
}
*pci_addr = addr;
return 0;
}
static unsigned int
conf_read(unsigned long addr)
{
unsigned long flags, code, stat0;
unsigned int value;
local_irq_save(flags);
/* Reset status register to avoid losing errors. */
stat0 = *(vulp)LCA_IOC_STAT0;
*(vulp)LCA_IOC_STAT0 = stat0;
mb();
/* Access configuration space. */
value = *(vuip)addr;
draina();
stat0 = *(vulp)LCA_IOC_STAT0;
if (stat0 & LCA_IOC_STAT0_ERR) {
code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
& LCA_IOC_STAT0_CODE_MASK);
if (code != 1) {
printk("lca.c:conf_read: got stat0=%lx\n", stat0);
}
/* Reset error status. */
*(vulp)LCA_IOC_STAT0 = stat0;
mb();
/* Reset machine check. */
wrmces(0x7);
value = 0xffffffff;
}
local_irq_restore(flags);
return value;
}
static void
conf_write(unsigned long addr, unsigned int value)
{
unsigned long flags, code, stat0;
local_irq_save(flags); /* avoid getting hit by machine check */
/* Reset status register to avoid losing errors. */
stat0 = *(vulp)LCA_IOC_STAT0;
*(vulp)LCA_IOC_STAT0 = stat0;
mb();
/* Access configuration space. */
*(vuip)addr = value;
draina();
stat0 = *(vulp)LCA_IOC_STAT0;
if (stat0 & LCA_IOC_STAT0_ERR) {
code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
& LCA_IOC_STAT0_CODE_MASK);
if (code != 1) {
printk("lca.c:conf_write: got stat0=%lx\n", stat0);
}
/* Reset error status. */
*(vulp)LCA_IOC_STAT0 = stat0;
mb();
/* Reset machine check. */
wrmces(0x7);
}
local_irq_restore(flags);
}
static int
lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
unsigned long addr, pci_addr;
long mask;
int shift;
if (mk_conf_addr(bus, devfn, where, &pci_addr))
return PCIBIOS_DEVICE_NOT_FOUND;
shift = (where & 3) * 8;
mask = (size - 1) * 8;
addr = (pci_addr << 5) + mask + LCA_CONF;
*value = conf_read(addr) >> (shift);
return PCIBIOS_SUCCESSFUL;
}
static int
lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
u32 value)
{
unsigned long addr, pci_addr;
long mask;
if (mk_conf_addr(bus, devfn, where, &pci_addr))
return PCIBIOS_DEVICE_NOT_FOUND;
mask = (size - 1) * 8;
addr = (pci_addr << 5) + mask + LCA_CONF;
conf_write(addr, value << ((where & 3) * 8));
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops lca_pci_ops =
{
.read = lca_read_config,
.write = lca_write_config,
};
void
lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
{
wmb();
*(vulp)LCA_IOC_TBIA = 0;
mb();
}
void __init
lca_init_arch(void)
{
struct pci_controller *hose;
/*
* Create our single hose.
*/
pci_isa_hose = hose = alloc_pci_controller();
hose->io_space = &ioport_resource;
hose->mem_space = &iomem_resource;
hose->index = 0;
hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
hose->sparse_io_base = LCA_IO - IDENT_ADDR;
hose->dense_io_base = 0;
/*
* Set up the PCI to main memory translation windows.
*
* Mimic the SRM settings for the direct-map window.
* Window 0 is scatter-gather 8MB at 8MB (for isa).
* Window 1 is direct access 1GB at 1GB.
*
* Note that we do not try to save any of the DMA window CSRs
* before setting them, since we cannot read those CSRs on LCA.
*/
hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
hose->sg_pci = NULL;
__direct_map_base = 0x40000000;
__direct_map_size = 0x40000000;
*(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
*(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
*(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
*(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
*(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
*(vulp)LCA_IOC_T_BASE1 = 0;
*(vulp)LCA_IOC_TB_ENA = 0x80;
lca_pci_tbi(hose, 0, -1);
/*
* Disable PCI parity for now. The NCR53c810 chip has
* troubles meeting the PCI spec which results in
* data parity errors.
*/
*(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
/*
* Finally, set up for restoring the correct HAE if using SRM.
* Again, since we cannot read many of the CSRs on the LCA,
* one of which happens to be the HAE, we save the value that
* the SRM will expect...
*/
if (alpha_using_srm)
srm_hae = 0x80000000UL;
}
/*
* Constants used during machine-check handling. I suppose these
* could be moved into lca.h but I don't see much reason why anybody
* else would want to use them.
*/
#define ESR_EAV (1UL<< 0) /* error address valid */
#define ESR_CEE (1UL<< 1) /* correctable error */
#define ESR_UEE (1UL<< 2) /* uncorrectable error */
#define ESR_WRE (1UL<< 3) /* write-error */
#define ESR_SOR (1UL<< 4) /* error source */
#define ESR_CTE (1UL<< 7) /* cache-tag error */
#define ESR_MSE (1UL<< 9) /* multiple soft errors */
#define ESR_MHE (1UL<<10) /* multiple hard errors */
#define ESR_NXM (1UL<<12) /* non-existent memory */
#define IOC_ERR ( 1<<4) /* ioc logs an error */
#define IOC_CMD_SHIFT 0
#define IOC_CMD (0xf<<IOC_CMD_SHIFT)
#define IOC_CODE_SHIFT 8
#define IOC_CODE (0xf<<IOC_CODE_SHIFT)
#define IOC_LOST ( 1<<5)
#define IOC_P_NBR ((__u32) ~((1<<13) - 1))
static void
mem_error(unsigned long esr, unsigned long ear)
{
printk(" %s %s error to %s occurred at address %x\n",
((esr & ESR_CEE) ? "Correctable" :
(esr & ESR_UEE) ? "Uncorrectable" : "A"),
(esr & ESR_WRE) ? "write" : "read",
(esr & ESR_SOR) ? "memory" : "b-cache",
(unsigned) (ear & 0x1ffffff8));
if (esr & ESR_CTE) {
printk(" A b-cache tag parity error was detected.\n");
}
if (esr & ESR_MSE) {
printk(" Several other correctable errors occurred.\n");
}
if (esr & ESR_MHE) {
printk(" Several other uncorrectable errors occurred.\n");
}
if (esr & ESR_NXM) {
printk(" Attempted to access non-existent memory.\n");
}
}
static void
ioc_error(__u32 stat0, __u32 stat1)
{
static const char * const pci_cmd[] = {
"Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
"Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
"Rsvd4", "Configuration Read", "Configuration Write",
"Memory Read Multiple", "Dual Address", "Memory Read Line",
"Memory Write and Invalidate"
};
static const char * const err_name[] = {
"exceeded retry limit", "no device", "bad data parity",
"target abort", "bad address parity", "page table read error",
"invalid page", "data error"
};
unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
unsigned cmd = (stat0 & IOC_CMD) >> IOC_CMD_SHIFT;
printk(" %s initiated PCI %s cycle to address %x"
" failed due to %s.\n",
code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
if (code == 5 || code == 6) {
printk(" (Error occurred at PCI memory address %x.)\n",
(stat0 & ~IOC_P_NBR));
}
if (stat0 & IOC_LOST) {
printk(" Other PCI errors occurred simultaneously.\n");
}
}
void
lca_machine_check(unsigned long vector, unsigned long la_ptr)
{
const char * reason;
union el_lca el;
el.c = (struct el_common *) la_ptr;
wrmces(rdmces()); /* reset machine check pending flag */
printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
vector, get_irq_regs()->pc, (unsigned int) el.c->code);
/*
* The first quadword after the common header always seems to
* be the machine check reason---don't know why this isn't
* part of the common header instead. In the case of a long
* logout frame, the upper 32 bits is the machine check
* revision level, which we ignore for now.
*/
switch ((unsigned int) el.c->code) {
case MCHK_K_TPERR: reason = "tag parity error"; break;
case MCHK_K_TCPERR: reason = "tag control parity error"; break;
case MCHK_K_HERR: reason = "access to non-existent memory"; break;
case MCHK_K_ECC_C: reason = "correctable ECC error"; break;
case MCHK_K_ECC_NC: reason = "non-correctable ECC error"; break;
case MCHK_K_CACKSOFT: reason = "MCHK_K_CACKSOFT"; break;
case MCHK_K_BUGCHECK: reason = "illegal exception in PAL mode"; break;
case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
case MCHK_K_DCPERR: reason = "d-cache parity error"; break;
case MCHK_K_ICPERR: reason = "i-cache parity error"; break;
case MCHK_K_SIO_SERR: reason = "SIO SERR occurred on PCI bus"; break;
case MCHK_K_SIO_IOCHK: reason = "SIO IOCHK occurred on ISA bus"; break;
case MCHK_K_DCSR: reason = "MCHK_K_DCSR"; break;
case MCHK_K_UNKNOWN:
default: reason = "unknown"; break;
}
switch (el.c->size) {
case sizeof(struct el_lca_mcheck_short):
printk(KERN_CRIT
" Reason: %s (short frame%s, dc_stat=%#lx):\n",
reason, el.c->retry ? ", retryable" : "",
el.s->dc_stat);
if (el.s->esr & ESR_EAV) {
mem_error(el.s->esr, el.s->ear);
}
if (el.s->ioc_stat0 & IOC_ERR) {
ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
}
break;
case sizeof(struct el_lca_mcheck_long):
printk(KERN_CRIT " Reason: %s (long frame%s):\n",
reason, el.c->retry ? ", retryable" : "");
printk(KERN_CRIT
" reason: %#lx exc_addr: %#lx dc_stat: %#lx\n",
el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
printk(KERN_CRIT " car: %#lx\n", el.l->car);
if (el.l->esr & ESR_EAV) {
mem_error(el.l->esr, el.l->ear);
}
if (el.l->ioc_stat0 & IOC_ERR) {
ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
}
break;
default:
printk(KERN_CRIT " Unknown errorlog size %d\n", el.c->size);
}
/* Dump the logout area to give all info. */
#ifdef CONFIG_VERBOSE_MCHECK
if (alpha_verbose_mcheck > 1) {
unsigned long * ptr = (unsigned long *) la_ptr;
long i;
for (i = 0; i < el.c->size / sizeof(long); i += 2) {
printk(KERN_CRIT " +%8lx %016lx %016lx\n",
i*sizeof(long), ptr[i], ptr[i+1]);
}
}
#endif /* CONFIG_VERBOSE_MCHECK */
}
/*
* The following routines are needed to support the SPEED changing
* necessary to successfully manage the thermal problem on the AlphaBook1.
*/
void
lca_clock_print(void)
{
long pmr_reg;
pmr_reg = LCA_READ_PMR;
printk("Status of clock control:\n");
printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
printk("\tInterrupt override is %s\n",
(pmr_reg & LCA_PMR_INTO) ? "on" : "off");
printk("\tDMA override is %s\n",
(pmr_reg & LCA_PMR_DMAO) ? "on" : "off");
}
int
lca_get_clock(void)
{
long pmr_reg;
pmr_reg = LCA_READ_PMR;
return(LCA_GET_PRIMARY(pmr_reg));
}
void
lca_clock_fiddle(int divisor)
{
long pmr_reg;
pmr_reg = LCA_READ_PMR;
LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
/* lca_norm_clock = divisor; */
LCA_WRITE_PMR(pmr_reg);
mb();
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...