Revision 140d0b2108faebc77c6523296e211e509cb9f5f9 authored by Linus Torvalds on 05 August 2011, 05:35:59 UTC, committed by Linus Torvalds on 05 August 2011, 05:35:59 UTC
This isn't really critical any more, since other patches (commit
298507d4d2cf: "shm: optimize exit_shm()") have caused us to not actually
need to touch the rw_mutex unless there are actual shm segments
associated with the namespace, but we really should do tne shm_init_ns()
earlier than we do now.

This, together with commit 288d5abec831 ("Boot up with usermodehelper
disabled") will mean that we really do initialize the initial ipc
namespace data structure before we run any tasks.

Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent 24f0eed
Raw File
machvec_impl.h
/*
 *	linux/arch/alpha/kernel/machvec_impl.h
 *
 *	Copyright (C) 1997, 1998  Richard Henderson
 *
 * This file has goodies to help simplify instantiation of machine vectors.
 */

#include <asm/pgalloc.h>

/* Whee.  These systems don't have an HAE:
       IRONGATE, MARVEL, POLARIS, TSUNAMI, TITAN, WILDFIRE
   Fix things up for the GENERIC kernel by defining the HAE address
   to be that of the cache. Now we can read and write it as we like.  ;-)  */
#define IRONGATE_HAE_ADDRESS	(&alpha_mv.hae_cache)
#define MARVEL_HAE_ADDRESS	(&alpha_mv.hae_cache)
#define POLARIS_HAE_ADDRESS	(&alpha_mv.hae_cache)
#define TSUNAMI_HAE_ADDRESS	(&alpha_mv.hae_cache)
#define TITAN_HAE_ADDRESS	(&alpha_mv.hae_cache)
#define WILDFIRE_HAE_ADDRESS	(&alpha_mv.hae_cache)

#ifdef CIA_ONE_HAE_WINDOW
#define CIA_HAE_ADDRESS		(&alpha_mv.hae_cache)
#endif
#ifdef MCPCIA_ONE_HAE_WINDOW
#define MCPCIA_HAE_ADDRESS	(&alpha_mv.hae_cache)
#endif
#ifdef T2_ONE_HAE_WINDOW
#define T2_HAE_ADDRESS		(&alpha_mv.hae_cache)
#endif

/* Only a few systems don't define IACK_SC, handling all interrupts through
   the SRM console.  But splitting out that one case from IO() below
   seems like such a pain.  Define this to get things to compile.  */
#define JENSEN_IACK_SC		1
#define T2_IACK_SC		1
#define WILDFIRE_IACK_SC	1 /* FIXME */

/*
 * Some helpful macros for filling in the blanks.
 */

#define CAT1(x,y)  x##y
#define CAT(x,y)   CAT1(x,y)

#define DO_DEFAULT_RTC \
	.rtc_port = 0x70, \
	.rtc_get_time = common_get_rtc_time, \
	.rtc_set_time = common_set_rtc_time

#define DO_EV4_MMU							\
	.max_asn =			EV4_MAX_ASN,			\
	.mv_switch_mm =			ev4_switch_mm,			\
	.mv_activate_mm =		ev4_activate_mm,		\
	.mv_flush_tlb_current =		ev4_flush_tlb_current,		\
	.mv_flush_tlb_current_page =	ev4_flush_tlb_current_page

#define DO_EV5_MMU							\
	.max_asn =			EV5_MAX_ASN,			\
	.mv_switch_mm =			ev5_switch_mm,			\
	.mv_activate_mm =		ev5_activate_mm,		\
	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page

#define DO_EV6_MMU							\
	.max_asn =			EV6_MAX_ASN,			\
	.mv_switch_mm =			ev5_switch_mm,			\
	.mv_activate_mm =		ev5_activate_mm,		\
	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page

#define DO_EV7_MMU							\
	.max_asn =			EV6_MAX_ASN,			\
	.mv_switch_mm =			ev5_switch_mm,			\
	.mv_activate_mm =		ev5_activate_mm,		\
	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page

#define IO_LITE(UP,low)							\
	.hae_register =		(unsigned long *) CAT(UP,_HAE_ADDRESS),	\
	.iack_sc =		CAT(UP,_IACK_SC),			\
	.mv_ioread8 =		CAT(low,_ioread8),			\
	.mv_ioread16 =		CAT(low,_ioread16),			\
	.mv_ioread32 =		CAT(low,_ioread32),			\
	.mv_iowrite8 =		CAT(low,_iowrite8),			\
	.mv_iowrite16 =		CAT(low,_iowrite16),			\
	.mv_iowrite32 =		CAT(low,_iowrite32),			\
	.mv_readb =		CAT(low,_readb),			\
	.mv_readw =		CAT(low,_readw),			\
	.mv_readl =		CAT(low,_readl),			\
	.mv_readq =		CAT(low,_readq),			\
	.mv_writeb =		CAT(low,_writeb),			\
	.mv_writew =		CAT(low,_writew),			\
	.mv_writel =		CAT(low,_writel),			\
	.mv_writeq =		CAT(low,_writeq),			\
	.mv_ioportmap =		CAT(low,_ioportmap),			\
	.mv_ioremap =		CAT(low,_ioremap),			\
	.mv_iounmap =		CAT(low,_iounmap),			\
	.mv_is_ioaddr =		CAT(low,_is_ioaddr),			\
	.mv_is_mmio =		CAT(low,_is_mmio)			\

#define IO(UP,low)							\
	IO_LITE(UP,low),						\
	.pci_ops =		&CAT(low,_pci_ops),			\
	.mv_pci_tbi =		CAT(low,_pci_tbi)

#define DO_APECS_IO	IO(APECS,apecs)
#define DO_CIA_IO	IO(CIA,cia)
#define DO_IRONGATE_IO	IO(IRONGATE,irongate)
#define DO_LCA_IO	IO(LCA,lca)
#define DO_MARVEL_IO	IO(MARVEL,marvel)
#define DO_MCPCIA_IO	IO(MCPCIA,mcpcia)
#define DO_POLARIS_IO	IO(POLARIS,polaris)
#define DO_T2_IO	IO(T2,t2)
#define DO_TSUNAMI_IO	IO(TSUNAMI,tsunami)
#define DO_TITAN_IO	IO(TITAN,titan)
#define DO_WILDFIRE_IO	IO(WILDFIRE,wildfire)

#define DO_PYXIS_IO	IO_LITE(CIA,cia_bwx), \
			.pci_ops = &cia_pci_ops, \
			.mv_pci_tbi = cia_pci_tbi

/*
 * In a GENERIC kernel, we have lots of these vectors floating about,
 * all but one of which we want to go away.  In a non-GENERIC kernel,
 * we want only one, ever.
 *
 * Accomplish this in the GENERIC kernel by putting all of the vectors
 * in the .init.data section where they'll go away.  We'll copy the
 * one we want to the real alpha_mv vector in setup_arch.
 *
 * Accomplish this in a non-GENERIC kernel by ifdef'ing out all but
 * one of the vectors, which will not reside in .init.data.  We then
 * alias this one vector to alpha_mv, so no copy is needed.
 *
 * Upshot: set __initdata to nothing for non-GENERIC kernels.
 */

#ifdef CONFIG_ALPHA_GENERIC
#define __initmv __initdata
#define ALIAS_MV(x)
#else
#define __initmv __initdata_refok

/* GCC actually has a syntax for defining aliases, but is under some
   delusion that you shouldn't be able to declare it extern somewhere
   else beforehand.  Fine.  We'll do it ourselves.  */
#if 0
#define ALIAS_MV(system) \
  struct alpha_machine_vector alpha_mv __attribute__((alias(#system "_mv")));
#else
#define ALIAS_MV(system) \
  asm(".global alpha_mv\nalpha_mv = " #system "_mv");
#endif
#endif /* GENERIC */
back to top