1604f87 | Linus Torvalds | 10 July 2015, 19:49:56 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes and clean-up from Catalin Marinas: - ACPI fix when checking the validity of the GICC MADT subtable - handle debug exceptions in the el*_inv exception entries - remove pointless register assignment in two compat syscall wrappers - unnecessary include path - defconfig update * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: entry32: remove pointless register assignment arm64: entry: handle debug exceptions in el*_inv arm64: Keep the ARM64 Kconfig selects sorted ACPI / ARM64 : use the new BAD_MADT_GICC_ENTRY macro ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro arm64: defconfig: Add Ceva ahci to the defconfig arm64: remove another unnecessary libfdt include path | 10 July 2015, 19:49:56 UTC |
3cdeb9d | Linus Torvalds | 10 July 2015, 19:16:59 UTC | Merge tag 'powerpc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - opal-prd mmap fix from Vaidy - set kernel taint for MCEs from Daniel - alignment exception description from Anton - ppc4xx_hsta_msi build fix from Daniel - opal-elog interrupt fix from Alistair - core_idle_state race fix from Shreyas - hv-24x7 lockdep fix from Sukadev - multiple cxl fixes from Daniel, Ian, Mikey & Maninder - update MAINTAINERS to point at shared tree * tag 'powerpc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: cxl: Check if afu is not null in cxl_slbia powerpc: Update MAINTAINERS to point at shared tree powerpc/perf/24x7: Fix lockdep warning cxl: Fix off by one error allowing subsequent mmap page to be accessed cxl: Fail mmap if requested mapping is larger than assigned problem state area cxl: Fix refcounting in kernel API powerpc/powernv: Fix race in updating core_idle_state powerpc/powernv: Fix opal-elog interrupt handler powerpc/ppc4xx_hsta_msi: Include ppc-pci.h to fix reference to hose_list powerpc: Add plain English description for alignment exception oopses cxl: Test the correct mmio space before unmapping powerpc: Set the correct kernel taint on machine check errors cxl/vphb.c: Use phb pointer after NULL check powerpc/powernv: Fix vma page prot flags in opal-prd driver | 10 July 2015, 19:16:59 UTC |
ad2daa8 | Mark Rutland | 10 July 2015, 14:46:32 UTC | arm64: entry32: remove pointless register assignment We currently set x27 in compat_sys_sigreturn_wrapper and compat_sys_rt_sigreturn_wrapper, similarly to what we do with r8/why on 32-bit ARM, in an attempt to prevent sigreturns from being restarted. However, on arm64 we have always used pt_regs::syscallno for syscall restarting (for both native and compat tasks), and x27 is never inspected again before being overwritten in kernel_exit. This patch removes the pointless register assignments. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 10 July 2015, 15:47:13 UTC |
2c069a1 | Daniel Axtens | 09 July 2015, 23:04:25 UTC | cxl: Check if afu is not null in cxl_slbia The pointer to an AFU in the adapter's list of AFUs can be null if we're in the process of removing AFUs. The afu_list_lock doesn't guard against this. Say we have 2 slices, and we're in the process of removing cxl. - We remove the AFUs in order (see cxl_remove). In cxl_remove_afu for AFU 0, we take the lock, set adapter->afu[0] = NULL, and release the lock. - Then we get an slbia. In cxl_slbia we take the lock, and set afu = adapter->afu[0], which is NULL. - Therefore our attempt to check afu->enabled will blow up. Therefore, check if afu is a null pointer before dereferencing it. Cc: stable@vger.kernel.org Signed-off-by: Daniel Axtens <dja@axtens.net> Acked-by: Michael Neuling <mikey@neuling.org> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 10 July 2015, 01:44:25 UTC |
c4b5fd3 | Linus Torvalds | 09 July 2015, 20:35:39 UTC | Merge branch 'hpfs-patches' (patches from Mikulas Patocka) Merge hpfs updates from Mikulas Patocka. Mainly fstrim support, with some minor other cleanups. These were actually sent during the merge window, but I wanted to wait for the FSTRIM compat handling cleanup before applying them. Mikulas sent that earlier today. * emailed patches from Mikulas Patocka <mikulas@twibright.com>: hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead hpfs: kstrdup() out of memory handling hpfs: Remove unessary cast hpfs: add fstrim support | 09 July 2015, 20:35:39 UTC |
a28e4b2 | Joe Perches | 27 March 2015, 03:47:10 UTC | hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead Removing unnecessary static buffers is good. Use the vsprintf %pV extension instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Cc: stable@vger.kernel.org # v2.6.36+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 20:35:31 UTC |
ce65761 | Sanidhya Kashyap | 21 March 2015, 16:57:50 UTC | hpfs: kstrdup() out of memory handling There is a possibility of nothing being allocated to the new_opts in case of memory pressure, therefore return ENOMEM for such case. Signed-off-by: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 20:35:31 UTC |
d7b0409 | Firo Yang | 23 April 2015, 09:28:45 UTC | hpfs: Remove unessary cast Avoid a pointless kmem_cache_alloc() return value cast in fs/hpfs/super.c::hpfs_alloc_inode() Signed-off-by: Firo Yang <firogm@gmail.com> Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 20:35:31 UTC |
a27b5b9 | Mikulas Patocka | 28 June 2015, 13:16:57 UTC | hpfs: add fstrim support This patch adds support for fstrim to the HPFS filesystem. Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 20:35:30 UTC |
4c0a9f7 | Linus Torvalds | 09 July 2015, 20:13:11 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "There is a fix for CephFS and RBD when used within containers/namespaces, and a fix for the address learning the client is supposed to do when initially talking to the Ceph cluster. There are also two patches updating MAINTAINERS. One breaks out the common Ceph code shared by fs/ceph and drivers/block/rbd.c into a separate entry with the appropriate maintainers listed. The second adds a second reference to the github tree where the Ceph client development takes place (before it is pushed to korg and then to you). The goal here is to move closer to a situation where Ilya Dryomov or one of the other maintainers can push things to you if I am unavailable. Ilya has done most of the work preparing branches for upstream recently; you should not be surprised to hear from him if I am trapped in some internet-less wasteland or hit by a bus or something. In the meantime, we'll work on getting him added to the kernel web of trust" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: MAINTAINERS: add secondary tree for ceph modules MAINTAINERS: update ceph entries libceph: treat sockaddr_storage with uninitialized family as blank libceph: enable ceph in a non-default network namespace | 09 July 2015, 20:13:11 UTC |
9abea2d | Mikulas Patocka | 09 July 2015, 16:05:15 UTC | ioctl_compat: handle FITRIM The FITRIM ioctl has the same arguments on 32-bit and 64-bit architectures, so we can add it to the list of compatible ioctls and drop it from compat_ioctl method of various filesystems. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ted Ts'o <tytso@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 18:42:21 UTC |
6f95772 | Linus Torvalds | 09 July 2015, 18:20:01 UTC | Fix firmware loader uevent buffer NULL pointer dereference The firmware class uevent function accessed the "fw_priv->buf" buffer without the proper locking and testing for NULL. This is an old bug (looks like it goes back to 2012 and commit 1244691c73b2: "firmware loader: introduce firmware_buf"), but for some reason it's triggering only now in 4.2-rc1. Shuah Khan is trying to bisect what it is that causes this to trigger more easily, but in the meantime let's just fix the bug since others are hitting it too (at least Ingo reports having seen it as well). Reported-and-tested-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 18:20:01 UTC |
6b7339f | Kirill A. Shutemov | 06 July 2015, 20:18:37 UTC | mm: avoid setting up anonymous pages into file mapping Reading page fault handler code I've noticed that under right circumstances kernel would map anonymous pages into file mappings: if the VMA doesn't have vm_ops->fault() and the VMA wasn't fully populated on ->mmap(), kernel would handle page fault to not populated pte with do_anonymous_page(). Let's change page fault handler to use do_anonymous_page() only on anonymous VMA (->vm_ops == NULL) and make sure that the VMA is not shared. For file mappings without vm_ops->fault() or shred VMA without vm_ops, page fault on pte_none() entry would lead to SIGBUS. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 18:12:48 UTC |
6e67b7a | Sage Weil | 09 July 2015, 15:47:37 UTC | MAINTAINERS: add secondary tree for ceph modules The Ceph kernel code is primarily developed in the github tree, and only pushed to the korg tree before going to Linus. If Sage is unavailable and another maintainer needs to push something upstream, pull requests may originate from the github tree instead of Sage's korg tree. Signed-off-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 09 July 2015, 17:37:39 UTC |
398ecff | Sage Weil | 09 July 2015, 15:46:14 UTC | MAINTAINERS: update ceph entries - The Ceph common code is used by both fs/ceph and drivers/block/rbd. Add a separate maintainers entry. - Add Ilya as libceph maintainer and cephfs submaintainer. - Attribute Documentation/ABI/testing/sysfs-bus-rbd to rbd. - ceph-devel@vger.kernel.org should be L, not M in rbd entry. Signed-off-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 09 July 2015, 17:30:34 UTC |
c44bd69 | Ilya Dryomov | 09 July 2015, 10:57:52 UTC | libceph: treat sockaddr_storage with uninitialized family as blank addr_is_blank() should return true if family is neither AF_INET nor AF_INET6. This is what its counterpart entity_addr_t::is_blank_ip() is doing and it is the right thing to do: in process_banner() we check if our address is blank and if it is "learn" it from our peer. As it is, we never learn our address and always send out a blank one. This goes way back to ceph.git commit dd732cbfc1c9 ("use sockaddr_storage; and some ipv6 support groundwork") from 2009. While at at, do not open-code ipv6_addr_any() and use INADDR_ANY constant instead of 0. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com> | 09 July 2015, 17:30:34 UTC |
757856d | Ilya Dryomov | 25 June 2015, 14:47:45 UTC | libceph: enable ceph in a non-default network namespace Grab a reference on a network namespace of the 'rbd map' (in case of rbd) or 'mount' (in case of ceph) process and use that to open sockets instead of always using init_net and bailing if network namespace is anything but init_net. Be careful to not share struct ceph_client instances between different namespaces and don't add any code in the !CONFIG_NET_NS case. This is based on a patch from Hong Zhiguo <zhiguohong@tencent.com>. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com> | 09 July 2015, 17:30:34 UTC |
883a2df | Linus Torvalds | 09 July 2015, 00:34:51 UTC | Merge tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are fixes on top of the previous PM+ACPI pull requests (including one fix for a 4.1 regression) and two commits adding _CLS-based device enumeration support to the ACPI core and the ATA subsystem that waited for the latest ACPICA changes to be merged. Specifics: - Fix for an ACPI resources management regression introduced during the 4.1 cycle (that unfortunately went into -stable) effectively reverting the bad commit along with the recent fixups on top of it and using an alternative approach to address the underlying issue (Rafael J Wysocki). - Fix for a memory leak and an incorrect return value in an error code path in the ACPI LPSS (Low-Power Subsystem) driver (Rafael J Wysocki). - Fix for a leftover dangling pointer in an error code path in the new wakeup IRQ support code (Rafael J Wysocki). - Fix to prevent infinite loops (due to errors in other places) from happening in the core generic PM domains support code (Geert Uytterhoeven). - Hibernation documentation update/clarification (Uwe Geuder). - Support for _CLS-based device enumeration in the ACPI core and in the ATA subsystem (Suravee Suthikulpanit)" * tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / wakeirq: Avoid setting power.wakeirq too hastily ata: ahci_platform: Add ACPI _CLS matching ACPI / scan: Add support for ACPI _CLS device matching PM / hibernate: clarify resume documentation PM / Domains: Avoid infinite loops in attach/detach code ACPI / LPSS: Fix up acpi_lpss_create_device() ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage | 09 July 2015, 00:34:51 UTC |
331c584 | Linus Torvalds | 09 July 2015, 00:15:55 UTC | Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile fix from Chris Metcalf: "This fix eliminates a "section mismatch" warning caused by the new __ex_table checking code in modpost" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: modpost: work correctly with tile coldtext sections | 09 July 2015, 00:15:55 UTC |
9d993cc | Linus Torvalds | 09 July 2015, 00:14:54 UTC | Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module fix from Rusty Russell: "Single fix: missing rbtree removal in the module load failure path. Easy to trigger with bad params. Thanks to Peter Zijlstra and Arthur Marsh for going around on this one" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Fix load_module() error path | 09 July 2015, 00:14:54 UTC |
673c2c3 | Chris Metcalf | 08 July 2015, 21:07:41 UTC | modpost: work correctly with tile coldtext sections The tilegx and tilepro compilers use .coldtext for their unlikely executed text section name, so an __attribute__((cold)) function will (when compiled with higher optimization levels) land in the .coldtext section. Modify modpost to add .coldtext to the set of OTHER_TEXT_SECTIONS so we don't get warnings about referencing such a section in an __ex_table block, and then also modify arch/tile/lib/memcpy_user_64.c so that it uses plain ".coldtext" instead of ".coldtext.memcpy". The latter naming is a relic of an earlier use of -ffunction-sections, which we no longer use by default. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> | 08 July 2015, 22:53:49 UTC |
758556b | Peter Zijlstra | 08 July 2015, 21:18:06 UTC | module: Fix load_module() error path The load_module() error path frees a module but forgot to take it out of the mod_tree, leaving a dangling entry in the tree, causing havoc. Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: Arthur Marsh <arthur.marsh@internode.on.net> Tested-by: Arthur Marsh <arthur.marsh@internode.on.net> Fixes: 93c2e105f6bc ("module: Optimize __module_address() using a latched RB-tree") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> | 08 July 2015, 21:27:12 UTC |
1b42804 | Mark Rutland | 07 July 2015, 17:00:49 UTC | arm64: entry: handle debug exceptions in el*_inv Currently we enable debug exceptions before reading ESR_EL1 in both el0_inv and el1_inv. If a debug exception is taken before we read ESR_EL1, the value will have been corrupted. As el*_inv is typically fatal, an intervening debug exception results in misleading debug information being logged to the console, but is not otherwise harmful. As with the other entry paths, we can use the ESR_EL1 value stashed earlier in the exception entry (in x25 for el0_sync{,_compat}, and x1 for el1_sync), giving us better error reporting in this case. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 08 July 2015, 17:03:48 UTC |
45820c2 | Linus Torvalds | 08 July 2015, 16:33:38 UTC | Fix broken audit tests for exec arg len The "fix" in commit 0b08c5e5944 ("audit: Fix check of return value of strnlen_user()") didn't fix anything, it broke things. As reported by Steven Rostedt: "Yes, strnlen_user() returns 0 on fault, but if you look at what len is set to, than you would notice that on fault len would be -1" because we just subtracted one from the return value. So testing against 0 doesn't test for a fault condition, it tests against a perfectly valid empty string. Also fix up the usual braindamage wrt using WARN_ON() inside a conditional - make it part of the conditional and remove the explicit unlikely() (which is already part of the WARN_ON*() logic, exactly so that you don't have to write unreadable code. Reported-and-tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Cc: Paul Moore <pmoore@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 July 2015, 16:33:38 UTC |
9958084 | Michael Ellerman | 07 July 2015, 09:16:23 UTC | powerpc: Update MAINTAINERS to point at shared tree Now that we have a shared powerpc tree on kernel.org, point folks at that as the primary place to look for powerpc stuff. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 08 July 2015, 05:18:21 UTC |
442053e | Sukadev Bhattiprolu | 07 July 2015, 16:21:10 UTC | powerpc/perf/24x7: Fix lockdep warning The sysfs attributes for the 24x7 counters are dynamically allocated. Initialize the attributes using sysfs_attr_init() to fix following warning which occurs when CONFIG_DEBUG_LOCK_VMALLOC=y. [ 0.346249] audit: initializing netlink subsys (disabled) [ 0.346284] audit: type=2000 audit(1436295254.340:1): initialized [ 0.346489] BUG: key c0000000efe90198 not in .data! [ 0.346491] DEBUG_LOCKS_WARN_ON(1) [ 0.346502] ------------[ cut here ]------------ [ 0.346504] WARNING: at ../kernel/locking/lockdep.c:3002 [ 0.346506] Modules linked in: Reported-by: Gustavo Luiz Duarte <gustavold@linux.vnet.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Tested-by: Gustavo Luiz Duarte <gustavold@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 08 July 2015, 05:18:04 UTC |
10a5894 | Ian Munsie | 07 July 2015, 05:45:45 UTC | cxl: Fix off by one error allowing subsequent mmap page to be accessed It was discovered that if a process mmaped their problem state area they were able to access one page more than expected, potentially allowing them to access the problem state area of an unrelated process. This was due to a simple off by one error in the mmap fault handler introduced in 0712dc7e73e59d79bcead5d5520acf4e9e917e87 ("cxl: Fix issues when unmapping contexts"), which is fixed in this patch. Cc: stable@vger.kernel.org Fixes: 0712dc7e73e5 ("cxl: Fix issues when unmapping contexts") Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 08 July 2015, 05:17:47 UTC |
5caaf53 | Ian Munsie | 07 July 2015, 05:45:46 UTC | cxl: Fail mmap if requested mapping is larger than assigned problem state area This patch makes the mmap call fail outright if the requested region is larger than the problem state area assigned to the context so the error is reported immediately rather than waiting for an attempt to access an address out of bounds. Although we never expect users to map more than the assigned problem state area and are not aware of anyone doing this (other than for testing), this does have the potential to break users if someone has used a larger range regardless. I'm submitting it for consideration, but if this change is not considered acceptable the previous patch is sufficient to prevent access out of bounds without breaking anyone. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 08 July 2015, 05:17:46 UTC |
d6ac4ff | Linus Torvalds | 07 July 2015, 22:19:09 UTC | Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: "These are late by a week; they should have been merged during the merge window, but unfortunately, the ARM kernel build/boot farms were indicating random failures, and it wasn't clear whether the cause was something in these changes or something during the merge window. This is a set of merge window fixes with some documentation additions" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: avoid unwanted GCC memset()/memcpy() optimisations for IO variants ARM: pgtable: document mapping types ARM: io: convert ioremap*() to functions ARM: io: fix ioremap_wt() implementation ARM: io: document ARM specific behaviour of ioremap*() implementations ARM: fix lockdep unannotated irqs-off warning ARM: 8397/1: fix vdsomunge not to depend on glibc specific error.h ARM: add helpful message when truncating physical memory ARM: add help text for HIGHPTE configuration entry ARM: fix DEBUG_SET_MODULE_RONX build dependencies ARM: 8396/1: use phys_addr_t in pfn_to_kaddr() ARM: 8394/1: update memblock limit after mapping lowmem ARM: 8393/1: smp: Fix suspicious RCU usage with ipi tracepoints | 07 July 2015, 22:19:09 UTC |
4f27395 | Tomas Winkler | 07 July 2015, 21:22:03 UTC | mei: nfc: fix deadlock on shutdown/suspend path In function mei_nfc_host_exit mei_cl_remove_device cannot be called under the device mutex as device removing flow invokes the device driver remove handler that calls in turn to mei_cl_disable_device which naturally acquires the device mutex. Also remove mei_cl_bus_remove_devices which has the same issue, but is never executed as currently the only device on the mei client bus is NFC and a new device cannot be easily added till the bus revamp is completed. This fixes regression caused by commit be9b720a0ccb ("mei_phy: move all nfc logic from mei driver to nfc") Prior to this change the nfc driver remove handler called to no-op disable function while actual nfc device was disabled directly from the mei driver. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 07 July 2015, 22:04:12 UTC |
8076ca4 | Rafael J. Wysocki | 07 July 2015, 20:48:25 UTC | Merge branch 'acpi-scan' * acpi-scan: ata: ahci_platform: Add ACPI _CLS matching ACPI / scan: Add support for ACPI _CLS device matching | 07 July 2015, 20:48:25 UTC |
d0aee67 | Rafael J. Wysocki | 07 July 2015, 20:48:14 UTC | Merge branches 'acpi-pnp', 'acpi-soc', 'pm-domains' and 'pm-sleep' * acpi-pnp: ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage * acpi-soc: ACPI / LPSS: Fix up acpi_lpss_create_device() * pm-domains: PM / Domains: Avoid infinite loops in attach/detach code * pm-sleep: PM / hibernate: clarify resume documentation | 07 July 2015, 20:48:14 UTC |
3fc7aee | Rafael J. Wysocki | 07 July 2015, 20:47:43 UTC | Merge branch 'pm-wakeirq' * pm-wakeirq: PM / wakeirq: Avoid setting power.wakeirq too hastily | 07 July 2015, 20:47:43 UTC |
ef37566 | Catalin Marinas | 07 July 2015, 16:15:39 UTC | arm64: Keep the ARM64 Kconfig selects sorted Move EDAC_SUPPORT to the right place. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 07 July 2015, 16:15:39 UTC |
99e3e3a | Al Stone | 06 July 2015, 23:16:48 UTC | ACPI / ARM64 : use the new BAD_MADT_GICC_ENTRY macro For those parts of the arm64 ACPI code that need to check GICC subtables in the MADT, use the new BAD_MADT_GICC_ENTRY macro instead of the previous BAD_MADT_ENTRY. The new macro takes into account differences in the size of the GICC subtable that the old macro did not; this caused failures even though the subtable entries are valid. Fixes: aeb823bbacc2 ("ACPICA: ACPI 6.0: Add changes for FADT table.") Signed-off-by: Al Stone <al.stone@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 07 July 2015, 13:55:04 UTC |
b6cfb27 | Al Stone | 06 July 2015, 23:16:47 UTC | ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro The BAD_MADT_ENTRY() macro is designed to work for all of the subtables of the MADT. In the ACPI 5.1 version of the spec, the struct for the GICC subtable (struct acpi_madt_generic_interrupt) is 76 bytes long; in ACPI 6.0, the struct is 80 bytes long. But, there is only one definition in ACPICA for this struct -- and that is the 6.0 version. Hence, when BAD_MADT_ENTRY() compares the struct size to the length in the GICC subtable, it fails if 5.1 structs are in use, and there are systems in the wild that have them. This patch adds the BAD_MADT_GICC_ENTRY() that checks the GICC subtable only, accounting for the difference in specification versions that are possible. The BAD_MADT_ENTRY() will continue to work as is for all other MADT subtables. This code is being added to an arm64 header file since that is currently the only architecture using the GICC subtable of the MADT. As a GIC is specific to ARM, it is also unlikely the subtable will be used elsewhere. Fixes: aeb823bbacc2 ("ACPICA: ACPI 6.0: Add changes for FADT table.") Signed-off-by: Al Stone <al.stone@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> [catalin.marinas@arm.com: extra brackets around macro arguments] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 07 July 2015, 13:54:59 UTC |
06be5ee | Russell King | 07 July 2015, 11:35:33 UTC | Merge branches 'fixes' and 'ioremap' into for-linus | 07 July 2015, 11:35:33 UTC |
6d3dab7 | Rafael J. Wysocki | 07 July 2015, 11:08:39 UTC | PM / wakeirq: Avoid setting power.wakeirq too hastily If dev_pm_attach_wake_irq() fails, the device's power.wakeirq field should not be set to point to the struct wake_irq passed to that function, as that object will be freed going forward. For this reason, make dev_pm_attach_wake_irq() first call device_wakeup_attach_irq() and only set the device's power.wakeirq field if that's successful. That requires device_wakeup_attach_irq() to be called under the device's power.lock lock, but since dev_pm_attach_wake_irq() is the only caller of it, the requisite changes are easy to make. Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Reported-by: Felipe Balbi <balbi@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 07 July 2015, 11:08:39 UTC |
3f8dc44 | Michael Neuling | 07 July 2015, 01:01:17 UTC | cxl: Fix refcounting in kernel API Currently the kernel API AFU dev refcounting is done on context start and stop. This patch moves this refcounting to context init and release, bringing it inline with how the userspace API does it. Without this we've seen the refcounting on the AFU get out of whack between the user and kernel API usage. This causes the AFU structures to be freed when they are actually still in use. This fixes some kref warnings we've been seeing and spurious ErrIVTE IRQs. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 07 July 2015, 09:38:37 UTC |
b32aadc | Shreyas B. Prabhu | 06 July 2015, 20:09:23 UTC | powerpc/powernv: Fix race in updating core_idle_state core_idle_state is maintained for each core. It uses 0-7 bits to track whether a thread in the core has entered fastsleep or winkle. 8th bit is used as a lock bit. The lock bit is set in these 2 scenarios- - The thread is first in subcore to wakeup from sleep/winkle. - If its the last thread in the core about to enter sleep/winkle While the lock bit is set, if any other thread in the core wakes up, it loops until the lock bit is cleared before proceeding in the wakeup path. This helps prevent race conditions w.r.t fastsleep workaround and prevents threads from switching to process context before core/subcore resources are restored. But, in the path to sleep/winkle entry, we currently don't check for lock-bit. This exposes us to following race when running with subcore on- First thread in the subcorea Another thread in the same waking up core entering sleep/winkle lwarx r15,0,r14 ori r15,r15,PNV_CORE_IDLE_LOCK_BIT stwcx. r15,0,r14 [Code to restore subcore state] lwarx r15,0,r14 [clear thread bit] stwcx. r15,0,r14 andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS stw r15,0(r14) Here, after the thread entering sleep clears its thread bit in core_idle_state, the value is overwritten by the thread waking up. In such cases when the core enters fastsleep, code mistakes an idle thread as running. Because of this, the first thread waking up from fastsleep which is supposed to resync timebase skips it. So we can end up having a core with stale timebase value. This patch fixes the above race by looping on the lock bit even while entering the idle states. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Fixes: 7b54e9f213f76 'powernv/powerpc: Add winkle support for offline cpus' Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 07 July 2015, 00:16:52 UTC |
c7e9ad7 | Linus Torvalds | 07 July 2015, 00:07:56 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: - fix the perf build, by fixing the rbtree.c sharing bug between kernel and tools/perf by creating a local copy of rbtree.c (more will be done for v4.3) - fix an AUX buffer (Intel-PT support) refcounting bug - fix copy_from_user_nmi() return value" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix copy_from_user_nmi() return if range is not ok perf: Fix AUX buffer refcounting tools: Copy rbtree_augmented.h from the kernel tools: Move rbtree.h from tools/perf/ tools: Copy lib/rbtree.c to tools/lib/ perf tools: Copy rbtree.h from the kernel tools: Adopt {READ,WRITE_ONCE} from the kernel | 07 July 2015, 00:07:56 UTC |
2051e92 | Suthikulpanit, Suravee | 06 July 2015, 23:55:21 UTC | ata: ahci_platform: Add ACPI _CLS matching This patch adds ACPI supports for AHCI platform driver, which uses _CLS method to match the device. The following is an example of ASL structure in DSDT for a SATA controller, which contains _CLS package to be matched by the ahci_platform driver: Device (AHC0) // AHCI Controller { Name(_HID, "AMDI0600") Name (_CCA, 1) Name (_CLS, Package (3) { 0x01, // Base Class: Mass Storage 0x06, // Sub-Class: serial ATA 0x01, // Interface: AHCI }) Name (_CRS, ResourceTemplate () { Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000) Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 } }) } Also, since ATA driver should not require PCI support for ATA_ACPI, this patch removes dependency in the driver/ata/Kconfig. Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 06 July 2015, 23:55:21 UTC |
26095a0 | Suthikulpanit, Suravee | 06 July 2015, 23:55:20 UTC | ACPI / scan: Add support for ACPI _CLS device matching Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver acpi_match_table to match devices. However, for generic drivers, we do not want to list _HID for all supported devices. Also, certain classes of devices do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS, which specifies PCI-defined class code (i.e. base-class, subclass and programming interface). This patch adds support for matching ACPI devices using the _CLS method. To support loadable module, current design uses _HID or _CID to match device's modalias. With the new way of matching with _CLS this would requires modification to the current ACPI modalias key to include _CLS. This patch appends PCI-defined class-code to the existing ACPI modalias as following. acpi:<HID>:<CID1>:<CID2>:..:<CIDn>:<bbsspp>: E.g: # cat /sys/devices/platform/AMDI0600:00/modalias acpi:AMDI0600:010601: where bb is th base-class code, ss is te sub-class code, and pp is the programming interface code Since there would not be _HID/_CID in the ACPI matching table of the driver, this patch adds a field to acpi_device_id to specify the matching _CLS. static const struct acpi_device_id ahci_acpi_match[] = { { ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) }, {}, }; In this case, the corresponded entry in modules.alias file would be: alias acpi*:010601:* ahci_platform Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 06 July 2015, 23:55:20 UTC |
b51f9b1 | Uwe Geuder | 29 June 2015, 20:35:05 UTC | PM / hibernate: clarify resume documentation it was not the whole truth that kernel mode cannot be used with swap on LVM Signed-off-by: Uwe Geuder <linuxkernel2015-ugeuder@snkmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 06 July 2015, 23:18:11 UTC |
93af5e9 | Geert Uytterhoeven | 26 June 2015, 09:14:14 UTC | PM / Domains: Avoid infinite loops in attach/detach code If pm_genpd_{add,remove}_device() keeps on failing with -EAGAIN, we end up with an infinite loop in genpd_dev_pm_{at,de}tach(). This may happen due to a genpd.prepared_count imbalance. This is a bug elsewhere, but it will result in a system lock up, possibly during reboot of an otherwise functioning system. To avoid this, put a limit on the maximum number of loop iterations, using an exponential back-off mechanism. If the limit is reached, the operation will just fail. An error message is already printed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 06 July 2015, 23:13:07 UTC |
d3e13ff | Rafael J. Wysocki | 06 July 2015, 22:31:47 UTC | ACPI / LPSS: Fix up acpi_lpss_create_device() Fix a return value (which should be a negative error code) and a memory leak (the list allocated by acpi_dev_get_resources() needs to be freed on ioremap() errors too) in acpi_lpss_create_device() introduced by commit 4483d59e29fe 'ACPI / LPSS: check the result of ioremap()'. Fixes: 4483d59e29fe 'ACPI / LPSS: check the result of ioremap()' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: 4.0+ <stable@vger.kernel.org> # 4.0+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 06 July 2015, 22:31:47 UTC |
0294112 | Rafael J. Wysocki | 04 July 2015, 01:09:03 UTC | ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage This effectively reverts the following three commits: 7bc10388ccdd ACPI / resources: free memory on error in add_region_before() 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources() (commit b9a5e5e18fbf introduced regressions some of which, but not all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd was a fixup on top of the latter) and causes ACPI fixed hardware resources to be reserved at the fs_initcall_sync stage of system initialization. The story is as follows. First, a boot regression was reported due to an apparent resource reservation ordering change after a commit that shouldn't lead to such changes. Investigation led to the conclusion that the problem happened because acpi_reserve_resources() was executed at the device_initcall() stage of system initialization which wasn't strictly ordered with respect to driver initialization (and with respect to the initialization of the pcieport driver in particular), so a random change causing the device initcalls to be run in a different order might break things. The response to that was to attempt to run acpi_reserve_resources() as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf). However, that turned out to be too early, because it caused resource reservations made by the PNP system driver to fail on at least one system and that failure was addressed by commit 0f1b414d1907. That fix still turned out to be insufficient, though, because calling acpi_reserve_resources() before the fs_initcall stage of system initialization caused a boot regression to happen on the eCAFE EC-800-H20G/S netbook. That meant that we only could call acpi_reserve_resources() at the fs_initcall initialization stage or later, but then we might just as well call it after the PNP initalization in which case commit 0f1b414d1907 wouldn't be necessary any more. For this reason, the changes made by commit 0f1b414d1907 are reverted (along with a memory leak fixup on top of that commit), the changes made by commit b9a5e5e18fbf that went too far are reverted too and acpi_reserve_resources() is changed into fs_initcall_sync, which will cause it to be executed after the PNP subsystem initialization (which is an fs_initcall) and before device initcalls (including the pcieport driver initialization) which should avoid the initial issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581 Link: http://marc.info/?t=143092384600002&r=1&w=2 Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by: Roland Dreier <roland@purestorage.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 06 July 2015, 21:52:21 UTC |
3446af3 | Suneel Garapati | 29 June 2015, 05:02:08 UTC | arm64: defconfig: Add Ceva ahci to the defconfig The Ceva ahci controller is available on the Xilinx Zynq UltraScale+ MPSoC. Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [catalin.marinas@arm.com: removed unnecessary defconfig changes] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 06 July 2015, 16:22:59 UTC |
4b59246 | Ard Biesheuvel | 06 July 2015, 15:08:09 UTC | arm64: remove another unnecessary libfdt include path Patch 63a4aea55670 ("of: clean-up unnecessary libfdt include paths") removed all explicit libfdt include paths, since those are no longer necessary after the latest dtc upgrade. However, this one snuck in during the same merge window. Remove it. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 06 July 2015, 16:15:14 UTC |
ebf2d26 | Yann Droneaud | 22 June 2015, 19:38:43 UTC | perf/x86: Fix copy_from_user_nmi() return if range is not ok Commit 0a196848ca36 ("perf: Fix arch_perf_out_copy_user default"), changes copy_from_user_nmi() to return the number of remaining bytes so that it behave like copy_from_user(). Unfortunately, when the range is outside of the process memory, the return value is still the number of byte copied, eg. 0, instead of the remaining bytes. As all users of copy_from_user_nmi() were modified as part of commit 0a196848ca36, the function should be fixed to return the total number of bytes if range is not correct. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435001923-30986-1-git-send-email-ydroneaud@opteya.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 06 July 2015, 12:09:27 UTC |
57ffc5c | Peter Zijlstra | 18 June 2015, 10:32:49 UTC | perf: Fix AUX buffer refcounting Its currently possible to drop the last refcount to the aux buffer from NMI context, which results in the expected fireworks. The refcounting needs a bigger overhaul, but to cure the immediate problem, delay the freeing by using an irq_work. Reviewed-and-tested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150618103249.GK19282@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 06 July 2015, 12:08:30 UTC |
a8956a7 | Alistair Popple | 03 July 2015, 07:39:12 UTC | powerpc/powernv: Fix opal-elog interrupt handler The conversion of opal events to a proper irqchip means that handlers are called until the relevant opal event has been cleared by processing it. Events that queue work should therefore use a threaded handler to mask the event until processing is complete. Signed-off-by: Alistair Popple <alistair@popple.id.au> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 06 July 2015, 10:24:36 UTC |
aaf6fd5 | Daniel Axtens | 05 July 2015, 23:40:34 UTC | powerpc/ppc4xx_hsta_msi: Include ppc-pci.h to fix reference to hose_list An earlier commit referenced 'hose_list' in sysdev/ppc4xx_hsta_msi.c. hose_list is defined in ppc-pci.h, which was not included in that file. Include it, fixing the build for the akebono defconfig used by the kbuild test robot. Fixes: f2c800aaceb6 ("powerpc/ppc4xx_hsta_msi: Move MSI-related ops to pci_controller_ops") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 06 July 2015, 10:24:36 UTC |
eab861a | Anton Blanchard | 02 July 2015, 04:56:20 UTC | powerpc: Add plain English description for alignment exception oopses If we take an alignment exception which we cannot fix, the oops currently prints: Unable to handle kernel paging request for unknown fault Lets print something more useful: Unable to handle kernel paging request for unaligned access at address 0xc0000000f77bba8f Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 06 July 2015, 10:24:35 UTC |
8c00d5c | Daniel Axtens | 02 July 2015, 05:55:21 UTC | cxl: Test the correct mmio space before unmapping Before freeing p2n, test p2n, not p1n. Signed-off-by: Daniel Axtens <dja@axtens.net> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 06 July 2015, 10:24:35 UTC |
27ea2c4 | Daniel Axtens | 15 June 2015, 03:25:19 UTC | powerpc: Set the correct kernel taint on machine check errors. This means the 'M' flag will work properly when the kernel prints a backtrace. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 06 July 2015, 10:24:35 UTC |
14f2118 | Maninder Singh | 29 June 2015, 10:35:11 UTC | cxl/vphb.c: Use phb pointer after NULL check static Anlaysis detected below error:- (error) Possible null pointer dereference: phb So, Use phb after NULL check. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 06 July 2015, 10:24:34 UTC |
d2d61ed | Ingo Molnar | 06 July 2015, 07:24:41 UTC | Merge branch 'perf/rbtree_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull rbtree build fix from Arnaldo Carvalho de Melo. Signed-off-by: Ingo Molnar <mingo@kernel.org> | 06 July 2015, 07:24:41 UTC |
d8ea782 | Vaidyanathan Srinivasan | 29 June 2015, 05:17:55 UTC | powerpc/powernv: Fix vma page prot flags in opal-prd driver opal-prd driver will mmap() firmware code/data area as private mapping to prd user space daemon. Write to this page will trigger COW faults. The new COW pages are normal kernel RAM pages accounted by the kernel and are not special. vma->vm_page_prot value will be used at page fault time for the new COW pages, while pgprot_t value passed in remap_pfn_range() is used for the initial page table entry. Hence: * Do not add _PAGE_SPECIAL in vma, but only for remap_pfn_range() * Also remap_pfn_range() will add the _PAGE_SPECIAL flag using pte_mkspecial() call, hence no need to specify in the driver This fix resolves the page accounting warning shown below: BUG: Bad rss-counter state mm:c0000007d34ac600 idx:1 val:19 The above warning is triggered since _PAGE_SPECIAL was incorrectly being set for the normal kernel COW pages. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 06 July 2015, 02:06:42 UTC |
307bc97 | Arnaldo Carvalho de Melo | 06 July 2015, 01:59:05 UTC | tools: Copy rbtree_augmented.h from the kernel To complete the transitioning to not to share the same files with the kernel, also moving it from tools/perf/include/linux/ to tools/include/linux to make the whoke rbtree kit to other tools/ living codebases. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-5bxyehixafckqm6ez25alnfo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 06 July 2015, 01:59:05 UTC |
03da23a | Arnaldo Carvalho de Melo | 06 July 2015, 01:54:01 UTC | tools: Move rbtree.h from tools/perf/ The previous step, copying the contents minus the rcupdate.h parts, was done as a minimal fix, now do the move from tools/perf/. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-52fllxtsgmtke66pmv98mcma@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 06 July 2015, 01:54:01 UTC |
3f73537 | Arnaldo Carvalho de Melo | 06 July 2015, 01:48:21 UTC | tools: Copy lib/rbtree.c to tools/lib/ So that we can remove kernel specific stuff we've been stubbing out via a tools/include/linux/export.h that gets removed in this patch and to avoid breakages in the future like the one fixed recently where rcupdate.h started being used in rbtree.h. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-rxuzfsozpb8hv1emwpx06rm6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 06 July 2015, 01:48:21 UTC |
1c4c715 | Linus Torvalds | 05 July 2015, 23:24:54 UTC | Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "Bug fixes (all for stable kernels) for ext4: - address corner cases for indirect blocks->extent migration - fix reserved block accounting invalidate_page when page_size != block_size (i.e., ppc or 1k block size file systems) - fix deadlocks when a memcg is under heavy memory pressure - fix fencepost error in lazytime optimization" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: replace open coded nofail allocation in ext4_free_blocks() ext4: correctly migrate a file with a hole at the beginning ext4: be more strict when migrating to non-extent based file ext4: fix reservation release on invalidatepage for delalloc fs ext4: avoid deadlocks in the writeback path by using sb_getblk_gfp bufferhead: Add _gfp version for sb_getblk() ext4: fix fencepost error in lazytime optimization | 05 July 2015, 23:24:54 UTC |
4407f96 | Arnaldo Carvalho de Melo | 05 July 2015, 17:17:04 UTC | perf tools: Copy rbtree.h from the kernel We were using the include/linux/rbtree.h directly from the kernel, which broke the build as soon as it started using rcupdate.h, to avoid dragging the rcu header files into tools/, for which there is no use so far, grab a copy of rbtree.h. This is the minimal fix, later patches will copy as well lib/rbtree.c and move rbtree.h into tools/include/, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-dfmuj0j63w4by7vhlh4hhn74@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 05 July 2015, 18:05:08 UTC |
728abda | Arnaldo Carvalho de Melo | 05 July 2015, 17:12:42 UTC | tools: Adopt {READ,WRITE_ONCE} from the kernel We need it to build rbtree.c after this cset: commit d72da4a4d973 Author: Peter Zijlstra <peterz@infradead.org> Date: Wed May 27 11:09:36 2015 +0930 rbtree: Make lockless searches non-fatal Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qlnzhezv5ddwst0w9fydju0y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 05 July 2015, 18:05:00 UTC |
d770e55 | Linus Torvalds | 05 July 2015, 18:01:52 UTC | Linux 4.2-rc1 | 05 July 2015, 18:01:52 UTC |
a585d2b | Linus Torvalds | 05 July 2015, 17:54:09 UTC | Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull late x86 platform driver updates from Darren Hart: "The following came in a bit later and I wanted them to bake in next a few more days before submitting, thus the second pull. A new intel_pmc_ipc driver, a symmetrical allocation and free fix in dell-laptop, a couple minor fixes, and some updated documentation in the dell-laptop comments. intel_pmc_ipc: - Add Intel Apollo Lake PMC IPC driver tc1100-wmi: - Delete an unnecessary check before the function call "kfree" dell-laptop: - Fix allocating & freeing SMI buffer page - Show info about WiGig and UWB in debugfs - Update information about wireless control" * tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver tc1100-wmi: Delete an unnecessary check before the function call "kfree" dell-laptop: Fix allocating & freeing SMI buffer page dell-laptop: Show info about WiGig and UWB in debugfs dell-laptop: Update information about wireless control | 05 July 2015, 17:54:09 UTC |
7444a07 | Michal Hocko | 05 July 2015, 16:33:44 UTC | ext4: replace open coded nofail allocation in ext4_free_blocks() ext4_free_blocks is looping around the allocation request and mimics __GFP_NOFAIL behavior without any allocation fallback strategy. Let's remove the open coded loop and replace it with __GFP_NOFAIL. Without the flag the allocator has no way to find out never-fail requirement and cannot help in any way. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org | 05 July 2015, 16:33:44 UTC |
1dc51b8 | Linus Torvalds | 05 July 2015, 02:36:06 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ... | 05 July 2015, 02:36:06 UTC |
9b284cb | Linus Torvalds | 05 July 2015, 02:11:33 UTC | bluetooth: fix list handling Commit 835a6a2f8603 ("Bluetooth: Stop sabotaging list poisoning") thought that the code was sabotaging the list poisoning when NULL'ing out the list pointers and removed it. But what was going on was that the bluetooth code was using NULL pointers for the list as a way to mark it empty, and that commit just broke it (and replaced the test with NULL with a "list_empty()" test on a uninitialized list instead, breaking things even further). So fix it all up to use the regular and real list_empty() handling (which does not use NULL, but a pointer to itself), also making sure to initialize the list properly (the previous NULL case was initialized implicitly by the session being allocated with kzalloc()) This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong An. [ I would normally expect to get this through the bt tree, but I'm going to release -rc1, so I'm just committing this directly - Linus ] Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Original-by: Tedd Ho-Jeong An <tedd.an@intel.com> Original-by: Marcel Holtmann <marcel@holtmann.org>: Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 05 July 2015, 02:11:33 UTC |
5c755fe | Linus Torvalds | 04 July 2015, 21:13:43 UTC | Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "It's been a busy development cycle for target-core in a number of different areas. The fabric API usage for se_node_acl allocation is now within target-core code, dropping the external API callers for all fabric drivers tree-wide. There is a new conversion to RCU hlists for se_node_acl and se_portal_group LUN mappings, that turns fast-past LUN lookup into a completely lockless code-path. It also removes the original hard-coded limitation of 256 LUNs per fabric endpoint. The configfs attributes for backends can now be shared between core and driver code, allowing existing drivers to use common code while still allowing flexibility for new backend provided attributes. The highlights include: - Merge sbc_verify_dif_* into common code (sagi) - Remove iscsi-target support for obsolete IFMarker/OFMarker (Christophe Vu-Brugier) - Add bidi support in target/user backend (ilias + vangelis + agover) - Move se_node_acl allocation into target-core code (hch) - Add crc_t10dif_update common helper (akinobu + mkp) - Handle target-core odd SGL mapping for data transfer memory (akinobu) - Move transport ID handling into target-core (hch) - Move task tag into struct se_cmd + support 64-bit tags (bart) - Convert se_node_acl->device_list[] to RCU hlist (nab + hch + paulmck) - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch + paulmck) - Simplify target backend driver registration (hch) - Consolidate + simplify target backend attribute implementations (hch + nab) - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch) - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab) - Drop unnecessary core_tpg_register TFO parameter (nab) - Use 64-bit LUNs tree-wide (hannes) - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits) target: Bump core version to v5.0 target: remove target_core_configfs.h target: remove unused TARGET_CORE_CONFIG_ROOT define target: consolidate version defines target: implement WRITE_SAME with UNMAP bit using ->execute_unmap target: simplify UNMAP handling target: replace se_cmd->execute_rw with a protocol_data field target/user: Fix inconsistent kmap_atomic/kunmap_atomic target: Send UA when changing LUN inventory target: Send UA upon LUN RESET tmr completion target: Send UA on ALUA target port group change target: Convert se_lun->lun_deve_lock to normal spinlock target: use 'se_dev_entry' when allocating UAs target: Remove 'ua_nacl' pointer from se_ua structure target_core_alua: Correct UA handling when switching states xen-scsiback: Fix compile warning for 64-bit LUN target: Remove TARGET_MAX_LUNS_PER_TRANSPORT target: use 64-bit LUNs target: Drop duplicate + unused se_dev_check_wce target: Drop unnecessary core_tpg_register TFO parameter ... | 04 July 2015, 21:13:43 UTC |
6d7c8e1 | Linus Torvalds | 04 July 2015, 21:07:47 UTC | Merge tag 'ntb-4.2' of git://github.com/jonmason/ntb Pull NTB updates from Jon Mason: "This includes a pretty significant reworking of the NTB core code, but has already produced some significant performance improvements. An abstraction layer was added to allow the hardware and clients to be easily added. This required rewriting the NTB transport layer for this abstraction layer. This modification will allow future "high performance" NTB clients. In addition to this change, a number of performance modifications were added. These changes include NUMA enablement, using CPU memcpy instead of asyncdma, and modification of NTB layer MTU size" * tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits) NTB: Add split BAR output for debugfs stats NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe NTB: Print driver name and version in module init NTB: Increase transport MTU to 64k from 16k NTB: Rename Intel code names to platform names NTB: Default to CPU memcpy for performance NTB: Improve performance with write combining NTB: Use NUMA memory in Intel driver NTB: Use NUMA memory and DMA chan in transport NTB: Rate limit ntb_qp_link_work NTB: Add tool test client NTB: Add ping pong test client NTB: Add parameters for Intel SNB B2B addresses NTB: Reset transport QP link stats on down NTB: Do not advance transport RX on link down NTB: Differentiate transport link down messages NTB: Check the device ID to set errata flags NTB: Enable link for Intel root port mode in probe NTB: Read peer info from local SPAD in transport NTB: Split ntb_hw_intel and ntb_transport drivers ... | 04 July 2015, 21:07:47 UTC |
0f1db7d | Al Viro | 04 July 2015, 20:17:39 UTC | 9p: cope with bogus responses from server in p9_client_{read,write} if server claims to have written/read more than we'd told it to, warn and cap the claimed byte count to avoid advancing more than we are ready to. | 04 July 2015, 20:17:39 UTC |
67e808f | Al Viro | 04 July 2015, 20:11:05 UTC | p9_client_write(): avoid double p9_free_req() Braino in "9p: switch p9_client_write() to passing it struct iov_iter *"; if response is impossible to parse and we discard the request, get the out of the loop right there. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 July 2015, 20:11:05 UTC |
a84b69c | Al Viro | 04 July 2015, 20:04:19 UTC | 9p: forgetting to cancel request on interrupted zero-copy RPC If we'd already sent a request and decide to abort it, we *must* issue TFLUSH properly and not just blindly reuse the tag, or we'll get seriously screwed when response eventually arrives and we confuse it for response to later request that had reused the same tag. Cc: stable@vger.kernel.org # v3.2 and later Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 July 2015, 20:04:19 UTC |
43c3dd0 | Matthew Wilcox | 03 July 2015, 14:40:43 UTC | dax: bdev_direct_access() may sleep The brd driver is the only in-tree driver that may sleep currently. After some discussion on linux-fsdevel, we decided that any driver may choose to sleep in its ->direct_access method. To ensure that all callers of bdev_direct_access() are prepared for this, add a call to might_sleep(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 July 2015, 19:56:57 UTC |
bbab37d | Matthew Wilcox | 03 July 2015, 14:40:42 UTC | block: Add support for DAX reads/writes to block devices If a block device supports the ->direct_access methods, bypass the normal DIO path and use DAX to go straight to memcpy() instead of allocating a DIO and a BIO. Includes support for the DIO_SKIP_DIO_COUNT flag in DAX, as is done in do_blockdev_direct_IO(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 July 2015, 19:56:57 UTC |
872eb12 | Matthew Wilcox | 03 July 2015, 14:40:39 UTC | dax: Use copy_from_iter_nocache When userspace does a write, there's no need for the written data to pollute the CPU cache. This matches the original XIP code. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 July 2015, 19:56:56 UTC |
44f4c05 | Matthew Wilcox | 03 July 2015, 14:40:38 UTC | dax: Add block size note to documentation For block devices which are small enough, mkfs will default to creating a filesystem with block sizes smaller than page size. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 04 July 2015, 19:56:56 UTC |
1b3618b | Linus Torvalds | 04 July 2015, 18:29:59 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Except for the preempt notifiers fix, these are all small bugfixes that could have been waited for -rc2. Sending them now since I was taking care of Peter's patch anyway" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: add hyper-v crash msrs values KVM: x86: remove data variable from kvm_get_msr_common KVM: s390: virtio-ccw: don't overwrite config space values KVM: x86: keep track of LVT0 changes under APICv KVM: x86: properly restore LVT0 KVM: x86: make vapics_in_nmi_mode atomic sched, preempt_notifier: separate notifier registration from static_key inc/dec | 04 July 2015, 18:29:59 UTC |
bf44fe4 | Dave Jiang | 18 June 2015, 09:17:30 UTC | NTB: Add split BAR output for debugfs stats When split BAR is enabled, the driver needs to dump out the split BAR registers rather than the original 64bit BAR registers. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:09:32 UTC |
fd839bf | Dave Jiang | 15 June 2015, 12:22:30 UTC | NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe The unsafe doorbell and scratchpad access should display reason when WARN is called. Otherwise we get a stack dump without any explanation. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:09:30 UTC |
7eb3878 | Dave Jiang | 15 June 2015, 12:21:33 UTC | NTB: Print driver name and version in module init Printouts driver name and version to indicate what is being loaded. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:09:28 UTC |
9891417 | Dave Jiang | 03 June 2015, 15:29:38 UTC | NTB: Increase transport MTU to 64k from 16k Benchmarking showed a significant performance increase with the MTU size to 64k instead of 16k. Change the driver default to 64k. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:09:27 UTC |
2f887b9 | Dave Jiang | 20 May 2015, 16:55:47 UTC | NTB: Rename Intel code names to platform names Instead of using the platform code names, use the correct platform names to identify the respective Intel NTB hardware. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:09:25 UTC |
a41ef05 | Dave Jiang | 19 May 2015, 20:52:04 UTC | NTB: Default to CPU memcpy for performance Disable DMA usage by default, since the CPU provides much better performance with write combining. Provide a module parameter to enable DMA usage when offloading the memcpy is preferred. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:09:24 UTC |
06917f7 | Dave Jiang | 19 May 2015, 20:45:46 UTC | NTB: Improve performance with write combining Changing the memory window BAR mappings to write combining significantly boosts the performance. We will also use memcpy that uses non-temporal store, which showed performance improvement when doing non-cached memcpys. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:09:21 UTC |
0e041fb | Allen Hubbe | 19 May 2015, 16:04:52 UTC | NTB: Use NUMA memory in Intel driver Allocate memory for the NUMA node of the NTB device. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:09:19 UTC |
1199aa6 | Allen Hubbe | 18 May 2015, 10:20:47 UTC | NTB: Use NUMA memory and DMA chan in transport Allocate memory and request the DMA channel for the same NUMA node as the NTB device. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:08:33 UTC |
2876228 | Allen Hubbe | 11 May 2015, 14:08:26 UTC | NTB: Rate limit ntb_qp_link_work When the ntb transport is connecting and waiting for the peer, the debug console receives lots of debug level messages about the remote qp link status being down. Rate limit those messages. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:08:30 UTC |
578b881 | Allen Hubbe | 21 May 2015, 06:51:39 UTC | NTB: Add tool test client This is a simple debugging driver that enables the doorbell and scratch pad registers to be read and written from the debugfs. This tool enables more complicated debugging to be scripted from user space. This driver may be used to test that your ntb hardware and drivers are functioning at a basic level. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:08:17 UTC |
963de47 | Allen Hubbe | 15 April 2015, 15:12:41 UTC | NTB: Add ping pong test client This is a simple ping pong driver that exercises the scratch pads and doorbells of the ntb hardware. This driver may be used to test that your ntb hardware and drivers are functioning at a basic level. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:07:42 UTC |
42fefc8 | Allen Hubbe | 11 May 2015, 09:45:30 UTC | NTB: Add parameters for Intel SNB B2B addresses Add module parameters for the addresses to be used in B2B topology. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:06:40 UTC |
2849b5d | Allen Hubbe | 12 May 2015, 12:09:15 UTC | NTB: Reset transport QP link stats on down Reset the link stats when the link goes down. In particular, the TX and RX index and count must be reset, or else the TX side will be sending packets to the RX side where the RX side is not expecting them. Reset all the stats, to be consistent. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:06:34 UTC |
c0900b3 | Allen Hubbe | 12 May 2015, 10:24:27 UTC | NTB: Do not advance transport RX on link down On link down, don't advance RX index to the next entry. The next entry should never be valid after receiving the link down flag. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:06:24 UTC |
e22e0b9 | Allen Hubbe | 12 May 2015, 10:55:44 UTC | NTB: Differentiate transport link down messages The same message "qp %d: Link Down\n" was printed at two locations in ntb_transport. Change the messages so they are distinct. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:06:19 UTC |
dd5d4d8 | Dave Jiang | 08 May 2015, 16:24:40 UTC | NTB: Check the device ID to set errata flags Set errata flags for the specific device IDs to which they apply, instead of the whole Xeon hardware class. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:06:14 UTC |
5ae0beb | Dave Jiang | 19 May 2015, 20:59:34 UTC | NTB: Enable link for Intel root port mode in probe Link training should be enabled in the driver probe for root port mode. We should not have to wait for transport to be loaded for this to happen. Otherwise the ntb device will not show up on the transparent bridge side of the link. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:06:08 UTC |
0f69a7d | Dave Jiang | 02 June 2015, 07:45:07 UTC | NTB: Read peer info from local SPAD in transport The transport was writing and then reading the peer scratch pad, essentially reading what it just wrote instead of exchanging any information with the peer. The transport expects the peer values to be the same as the local values, so this issue was not obvious. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:06:00 UTC |
e26a584 | Allen Hubbe | 09 April 2015, 14:33:20 UTC | NTB: Split ntb_hw_intel and ntb_transport drivers Change ntb_hw_intel to use the new NTB hardware abstraction layer. Split ntb_transport into its own driver. Change it to use the new NTB hardware abstraction layer. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> | 04 July 2015, 18:05:49 UTC |