Revision 18f5ed365d3f188a91149d528c853000330a4a58 authored by Takashi Sakamoto on 05 August 2015, 00:21:05 UTC, committed by Takashi Iwai on 05 August 2015, 05:52:39 UTC
Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface. This chip includes ARM7 core, and loads and runs program. The firmware is stored in on-board memory and loaded every powering-on from it. Echo Audio ships several versions of firmwares for each model. These firmwares have each quirk and the quirk changes a sequence of packets. As long as I investigated, AudioFire2/AudioFire4/AudioFirePre8 have a quirk to transfer a first packet with 0x02 in its dbc field. This causes ALSA Fireworks driver to detect discontinuity. In this case, firmware version 5.7.0, 5.7.3 and 5.8.0 are used. Payload CIP CIP quadlets header1 header2 02 00050002 90ffffff <- 42 0005000a 90013000 42 00050012 90014400 42 0005001a 90015800 02 0005001a 90ffffff 42 00050022 90019000 42 0005002a 9001a400 42 00050032 9001b800 02 00050032 90ffffff 42 0005003a 9001d000 42 00050042 9001e400 42 0005004a 9001f800 02 0005004a 90ffffff (AudioFire2 with firmware version 5.7.) $ dmesg snd-fireworks fw1.0: Detect discontinuity of CIP: 00 02 These models, AudioFire8 (since Jul 2009 ) and Gibson Robot Interface Pack series uses the same ARM binary as their firmware. Thus, this quirk may be observed among them. This commit adds a new member for AMDTP structure. This member represents the value of dbc field in a first AMDTP packet. Drivers can set it with a preferred value according to model's quirk. Tested-by: Johannes Oertei <johannes.oertel@uni-due.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
1 parent c85523d
sys_sx164.c
/*
* linux/arch/alpha/kernel/sys_sx164.c
*
* Copyright (C) 1995 David A Rusling
* Copyright (C) 1996 Jay A Estabrook
* Copyright (C) 1998, 1999, 2000 Richard Henderson
*
* Code supporting the SX164 (PCA56+PYXIS).
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <asm/ptrace.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_cia.h>
#include <asm/hwrpb.h>
#include <asm/tlbflush.h>
#include <asm/special_insns.h>
#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
static void __init
sx164_init_irq(void)
{
outb(0, DMA1_RESET_REG);
outb(0, DMA2_RESET_REG);
outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
outb(0, DMA2_MASK_REG);
if (alpha_using_srm)
alpha_mv.device_interrupt = srm_device_interrupt;
init_i8259a_irqs();
/* Not interested in the bogus interrupts (0,3,4,5,40-47),
NMI (1), or HALT (2). */
if (alpha_using_srm)
init_srm_irqs(40, 0x3f0000);
else
init_pyxis_irqs(0xff00003f0000UL);
setup_irq(16+6, &timer_cascade_irqaction);
}
/*
* PCI Fixup configuration.
*
* Summary @ PYXIS_INT_REQ:
* Bit Meaning
* 0 RSVD
* 1 NMI
* 2 Halt/Reset switch
* 3 MBZ
* 4 RAZ
* 5 RAZ
* 6 Interval timer (RTC)
* 7 PCI-ISA Bridge
* 8 Interrupt Line A from slot 3
* 9 Interrupt Line A from slot 2
*10 Interrupt Line A from slot 1
*11 Interrupt Line A from slot 0
*12 Interrupt Line B from slot 3
*13 Interrupt Line B from slot 2
*14 Interrupt Line B from slot 1
*15 Interrupt line B from slot 0
*16 Interrupt Line C from slot 3
*17 Interrupt Line C from slot 2
*18 Interrupt Line C from slot 1
*19 Interrupt Line C from slot 0
*20 Interrupt Line D from slot 3
*21 Interrupt Line D from slot 2
*22 Interrupt Line D from slot 1
*23 Interrupt Line D from slot 0
*
* IdSel
* 5 32 bit PCI option slot 2
* 6 64 bit PCI option slot 0
* 7 64 bit PCI option slot 1
* 8 Cypress I/O
* 9 32 bit PCI option slot 3
*/
static int __init
sx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[5][5] __initdata = {
/*INT INTA INTB INTC INTD */
{ 16+ 9, 16+ 9, 16+13, 16+17, 16+21}, /* IdSel 5 slot 2 J17 */
{ 16+11, 16+11, 16+15, 16+19, 16+23}, /* IdSel 6 slot 0 J19 */
{ 16+10, 16+10, 16+14, 16+18, 16+22}, /* IdSel 7 slot 1 J18 */
{ -1, -1, -1, -1, -1}, /* IdSel 8 SIO */
{ 16+ 8, 16+ 8, 16+12, 16+16, 16+20} /* IdSel 9 slot 3 J15 */
};
const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
return COMMON_TABLE_LOOKUP;
}
static void __init
sx164_init_pci(void)
{
cia_init_pci();
SMC669_Init(0);
}
static void __init
sx164_init_arch(void)
{
/*
* OSF palcode v1.23 forgets to enable PCA56 Motion Video
* Instructions. Let's enable it.
* We have to check palcode revision because CSERVE interface
* is subject to change without notice. For example, it
* has been changed completely since v1.16 (found in MILO
* distribution). -ink
*/
struct percpu_struct *cpu = (struct percpu_struct*)
((char*)hwrpb + hwrpb->processor_offset);
if (amask(AMASK_MAX) != 0
&& alpha_using_srm
&& (cpu->pal_revision & 0xffff) <= 0x117) {
__asm__ __volatile__(
"lda $16,8($31)\n"
"call_pal 9\n" /* Allow PALRES insns in kernel mode */
".long 0x64000118\n\n" /* hw_mfpr $0,icsr */
"ldah $16,(1<<(19-16))($31)\n"
"or $0,$16,$0\n" /* set MVE bit */
".long 0x74000118\n" /* hw_mtpr $0,icsr */
"lda $16,9($31)\n"
"call_pal 9" /* Disable PALRES insns */
: : : "$0", "$16");
printk("PCA56 MVI set enabled\n");
}
pyxis_init_arch();
}
/*
* The System Vector
*/
struct alpha_machine_vector sx164_mv __initmv = {
.vector_name = "SX164",
DO_EV5_MMU,
DO_DEFAULT_RTC,
DO_PYXIS_IO,
.machine_check = cia_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = DEFAULT_MEM_BASE,
.pci_dac_offset = PYXIS_DAC_OFFSET,
.nr_irqs = 48,
.device_interrupt = pyxis_device_interrupt,
.init_arch = sx164_init_arch,
.init_irq = sx164_init_irq,
.init_rtc = common_init_rtc,
.init_pci = sx164_init_pci,
.kill_arch = cia_kill_arch,
.pci_map_irq = sx164_map_irq,
.pci_swizzle = common_swizzle,
};
ALIAS_MV(sx164)
Computing file changes ...
