Revision 18f5ed365d3f188a91149d528c853000330a4a58 authored by Takashi Sakamoto on 05 August 2015, 00:21:05 UTC, committed by Takashi Iwai on 05 August 2015, 05:52:39 UTC
Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface.
This chip includes ARM7 core, and loads and runs program. The firmware
is stored in on-board memory and loaded every powering-on from it.

Echo Audio ships several versions of firmwares for each model. These
firmwares have each quirk and the quirk changes a sequence of packets.

As long as I investigated, AudioFire2/AudioFire4/AudioFirePre8 have a
quirk to transfer a first packet with 0x02 in its dbc field. This causes
ALSA Fireworks driver to detect discontinuity. In this case, firmware
version 5.7.0, 5.7.3 and 5.8.0 are used.

Payload  CIP      CIP
quadlets header1  header2
02       00050002 90ffffff <-
42       0005000a 90013000
42       00050012 90014400
42       0005001a 90015800
02       0005001a 90ffffff
42       00050022 90019000
42       0005002a 9001a400
42       00050032 9001b800
02       00050032 90ffffff
42       0005003a 9001d000
42       00050042 9001e400
42       0005004a 9001f800
02       0005004a 90ffffff
(AudioFire2 with firmware version 5.7.)

$ dmesg
snd-fireworks fw1.0: Detect discontinuity of CIP: 00 02

These models, AudioFire8 (since Jul 2009 ) and Gibson Robot Interface
Pack series uses the same ARM binary as their firmware. Thus, this
quirk may be observed among them.

This commit adds a new member for AMDTP structure. This member represents
the value of dbc field in a first AMDTP packet. Drivers can set it with
a preferred value according to model's quirk.

Tested-by: Johannes Oertei <johannes.oertel@uni-due.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
1 parent c85523d
Raw File
math.c
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>

#include <asm/uaccess.h>

#include "sfp-util.h"
#include <math-emu/soft-fp.h>
#include <math-emu/single.h>
#include <math-emu/double.h>

#define	OPC_PAL		0x00
#define OPC_INTA	0x10
#define OPC_INTL	0x11
#define OPC_INTS	0x12
#define OPC_INTM	0x13
#define OPC_FLTC	0x14
#define OPC_FLTV	0x15
#define OPC_FLTI	0x16
#define OPC_FLTL	0x17
#define OPC_MISC	0x18
#define	OPC_JSR		0x1a

#define FOP_SRC_S	0
#define FOP_SRC_T	2
#define FOP_SRC_Q	3

#define FOP_FNC_ADDx	0
#define FOP_FNC_CVTQL	0
#define FOP_FNC_SUBx	1
#define FOP_FNC_MULx	2
#define FOP_FNC_DIVx	3
#define FOP_FNC_CMPxUN	4
#define FOP_FNC_CMPxEQ	5
#define FOP_FNC_CMPxLT	6
#define FOP_FNC_CMPxLE	7
#define FOP_FNC_SQRTx	11
#define FOP_FNC_CVTxS	12
#define FOP_FNC_CVTxT	14
#define FOP_FNC_CVTxQ	15

#define MISC_TRAPB	0x0000
#define MISC_EXCB	0x0400

extern unsigned long alpha_read_fp_reg (unsigned long reg);
extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);


#ifdef MODULE

MODULE_DESCRIPTION("FP Software completion module");

extern long (*alpha_fp_emul_imprecise)(struct pt_regs *, unsigned long);
extern long (*alpha_fp_emul) (unsigned long pc);

static long (*save_emul_imprecise)(struct pt_regs *, unsigned long);
static long (*save_emul) (unsigned long pc);

long do_alpha_fp_emul_imprecise(struct pt_regs *, unsigned long);
long do_alpha_fp_emul(unsigned long);

int init_module(void)
{
	save_emul_imprecise = alpha_fp_emul_imprecise;
	save_emul = alpha_fp_emul;
	alpha_fp_emul_imprecise = do_alpha_fp_emul_imprecise;
	alpha_fp_emul = do_alpha_fp_emul;
	return 0;
}

void cleanup_module(void)
{
	alpha_fp_emul_imprecise = save_emul_imprecise;
	alpha_fp_emul = save_emul;
}

#undef  alpha_fp_emul_imprecise
#define alpha_fp_emul_imprecise		do_alpha_fp_emul_imprecise
#undef  alpha_fp_emul
#define alpha_fp_emul			do_alpha_fp_emul

#endif /* MODULE */


/*
 * Emulate the floating point instruction at address PC.  Returns -1 if the
 * instruction to be emulated is illegal (such as with the opDEC trap), else
 * the SI_CODE for a SIGFPE signal, else 0 if everything's ok.
 *
 * Notice that the kernel does not and cannot use FP regs.  This is good
 * because it means that instead of saving/restoring all fp regs, we simply
 * stick the result of the operation into the appropriate register.
 */
long
alpha_fp_emul (unsigned long pc)
{
	FP_DECL_EX;
	FP_DECL_S(SA); FP_DECL_S(SB); FP_DECL_S(SR);
	FP_DECL_D(DA); FP_DECL_D(DB); FP_DECL_D(DR);

	unsigned long fa, fb, fc, func, mode, src;
	unsigned long res, va, vb, vc, swcr, fpcr;
	__u32 insn;
	long si_code;

	get_user(insn, (__u32 __user *)pc);
	fc     = (insn >>  0) & 0x1f;	/* destination register */
	fb     = (insn >> 16) & 0x1f;
	fa     = (insn >> 21) & 0x1f;
	func   = (insn >>  5) & 0xf;
	src    = (insn >>  9) & 0x3;
	mode   = (insn >> 11) & 0x3;
	
	fpcr = rdfpcr();
	swcr = swcr_update_status(current_thread_info()->ieee_state, fpcr);

	if (mode == 3) {
		/* Dynamic -- get rounding mode from fpcr.  */
		mode = (fpcr >> FPCR_DYN_SHIFT) & 3;
	}

	switch (src) {
	case FOP_SRC_S:
		va = alpha_read_fp_reg_s(fa);
		vb = alpha_read_fp_reg_s(fb);
		
		FP_UNPACK_SP(SA, &va);
		FP_UNPACK_SP(SB, &vb);

		switch (func) {
		case FOP_FNC_SUBx:
			FP_SUB_S(SR, SA, SB);
			goto pack_s;

		case FOP_FNC_ADDx:
			FP_ADD_S(SR, SA, SB);
			goto pack_s;

		case FOP_FNC_MULx:
			FP_MUL_S(SR, SA, SB);
			goto pack_s;

		case FOP_FNC_DIVx:
			FP_DIV_S(SR, SA, SB);
			goto pack_s;

		case FOP_FNC_SQRTx:
			FP_SQRT_S(SR, SB);
			goto pack_s;
		}
		goto bad_insn;

	case FOP_SRC_T:
		va = alpha_read_fp_reg(fa);
		vb = alpha_read_fp_reg(fb);

		if ((func & ~3) == FOP_FNC_CMPxUN) {
			FP_UNPACK_RAW_DP(DA, &va);
			FP_UNPACK_RAW_DP(DB, &vb);
			if (!DA_e && !_FP_FRAC_ZEROP_1(DA)) {
				FP_SET_EXCEPTION(FP_EX_DENORM);
				if (FP_DENORM_ZERO)
					_FP_FRAC_SET_1(DA, _FP_ZEROFRAC_1);
			}
			if (!DB_e && !_FP_FRAC_ZEROP_1(DB)) {
				FP_SET_EXCEPTION(FP_EX_DENORM);
				if (FP_DENORM_ZERO)
					_FP_FRAC_SET_1(DB, _FP_ZEROFRAC_1);
			}
			FP_CMP_D(res, DA, DB, 3);
			vc = 0x4000000000000000UL;
			/* CMPTEQ, CMPTUN don't trap on QNaN,
			   while CMPTLT and CMPTLE do */
			if (res == 3
			    && ((func & 3) >= 2
				|| FP_ISSIGNAN_D(DA)
				|| FP_ISSIGNAN_D(DB))) {
				FP_SET_EXCEPTION(FP_EX_INVALID);
			}
			switch (func) {
			case FOP_FNC_CMPxUN: if (res != 3) vc = 0; break;
			case FOP_FNC_CMPxEQ: if (res) vc = 0; break;
			case FOP_FNC_CMPxLT: if (res != -1) vc = 0; break;
			case FOP_FNC_CMPxLE: if ((long)res > 0) vc = 0; break;
			}
			goto done_d;
		}

		FP_UNPACK_DP(DA, &va);
		FP_UNPACK_DP(DB, &vb);

		switch (func) {
		case FOP_FNC_SUBx:
			FP_SUB_D(DR, DA, DB);
			goto pack_d;

		case FOP_FNC_ADDx:
			FP_ADD_D(DR, DA, DB);
			goto pack_d;

		case FOP_FNC_MULx:
			FP_MUL_D(DR, DA, DB);
			goto pack_d;

		case FOP_FNC_DIVx:
			FP_DIV_D(DR, DA, DB);
			goto pack_d;

		case FOP_FNC_SQRTx:
			FP_SQRT_D(DR, DB);
			goto pack_d;

		case FOP_FNC_CVTxS:
			/* It is irritating that DEC encoded CVTST with
			   SRC == T_floating.  It is also interesting that
			   the bit used to tell the two apart is /U... */
			if (insn & 0x2000) {
				FP_CONV(S,D,1,1,SR,DB);
				goto pack_s;
			} else {
				vb = alpha_read_fp_reg_s(fb);
				FP_UNPACK_SP(SB, &vb);
				DR_c = DB_c;
				DR_s = DB_s;
				DR_e = DB_e + (1024 - 128);
				DR_f = SB_f << (52 - 23);
				goto pack_d;
			}

		case FOP_FNC_CVTxQ:
			if (DB_c == FP_CLS_NAN
			    && (_FP_FRAC_HIGH_RAW_D(DB) & _FP_QNANBIT_D)) {
			  /* AAHB Table B-2 says QNaN should not trigger INV */
				vc = 0;
			} else
				FP_TO_INT_ROUND_D(vc, DB, 64, 2);
			goto done_d;
		}
		goto bad_insn;

	case FOP_SRC_Q:
		vb = alpha_read_fp_reg(fb);

		switch (func) {
		case FOP_FNC_CVTQL:
			/* Notice: We can get here only due to an integer
			   overflow.  Such overflows are reported as invalid
			   ops.  We return the result the hw would have
			   computed.  */
			vc = ((vb & 0xc0000000) << 32 |	/* sign and msb */
			      (vb & 0x3fffffff) << 29);	/* rest of the int */
			FP_SET_EXCEPTION (FP_EX_INVALID);
			goto done_d;

		case FOP_FNC_CVTxS:
			FP_FROM_INT_S(SR, ((long)vb), 64, long);
			goto pack_s;

		case FOP_FNC_CVTxT:
			FP_FROM_INT_D(DR, ((long)vb), 64, long);
			goto pack_d;
		}
		goto bad_insn;
	}
	goto bad_insn;

pack_s:
	FP_PACK_SP(&vc, SR);
	if ((_fex & FP_EX_UNDERFLOW) && (swcr & IEEE_MAP_UMZ))
		vc = 0;
	alpha_write_fp_reg_s(fc, vc);
	goto done;

pack_d:
	FP_PACK_DP(&vc, DR);
	if ((_fex & FP_EX_UNDERFLOW) && (swcr & IEEE_MAP_UMZ))
		vc = 0;
done_d:
	alpha_write_fp_reg(fc, vc);
	goto done;

	/*
	 * Take the appropriate action for each possible
	 * floating-point result:
	 *
	 *	- Set the appropriate bits in the FPCR
	 *	- If the specified exception is enabled in the FPCR,
	 *	  return.  The caller (entArith) will dispatch
	 *	  the appropriate signal to the translated program.
	 *
	 * In addition, properly track the exception state in software
	 * as described in the Alpha Architecture Handbook section 4.7.7.3.
	 */
done:
	if (_fex) {
		/* Record exceptions in software control word.  */
		swcr |= (_fex << IEEE_STATUS_TO_EXCSUM_SHIFT);
		current_thread_info()->ieee_state
		  |= (_fex << IEEE_STATUS_TO_EXCSUM_SHIFT);

		/* Update hardware control register.  */
		fpcr &= (~FPCR_MASK | FPCR_DYN_MASK);
		fpcr |= ieee_swcr_to_fpcr(swcr);
		wrfpcr(fpcr);

		/* Do we generate a signal?  */
		_fex = _fex & swcr & IEEE_TRAP_ENABLE_MASK;
		si_code = 0;
		if (_fex) {
			if (_fex & IEEE_TRAP_ENABLE_DNO) si_code = FPE_FLTUND;
			if (_fex & IEEE_TRAP_ENABLE_INE) si_code = FPE_FLTRES;
			if (_fex & IEEE_TRAP_ENABLE_UNF) si_code = FPE_FLTUND;
			if (_fex & IEEE_TRAP_ENABLE_OVF) si_code = FPE_FLTOVF;
			if (_fex & IEEE_TRAP_ENABLE_DZE) si_code = FPE_FLTDIV;
			if (_fex & IEEE_TRAP_ENABLE_INV) si_code = FPE_FLTINV;
		}

		return si_code;
	}

	/* We used to write the destination register here, but DEC FORTRAN
	   requires that the result *always* be written... so we do the write
	   immediately after the operations above.  */

	return 0;

bad_insn:
	printk(KERN_ERR "alpha_fp_emul: Invalid FP insn %#x at %#lx\n",
	       insn, pc);
	return -1;
}

long
alpha_fp_emul_imprecise (struct pt_regs *regs, unsigned long write_mask)
{
	unsigned long trigger_pc = regs->pc - 4;
	unsigned long insn, opcode, rc, si_code = 0;

	/*
	 * Turn off the bits corresponding to registers that are the
	 * target of instructions that set bits in the exception
	 * summary register.  We have some slack doing this because a
	 * register that is the target of a trapping instruction can
	 * be written at most once in the trap shadow.
	 *
	 * Branches, jumps, TRAPBs, EXCBs and calls to PALcode all
	 * bound the trap shadow, so we need not look any further than
	 * up to the first occurrence of such an instruction.
	 */
	while (write_mask) {
		get_user(insn, (__u32 __user *)(trigger_pc));
		opcode = insn >> 26;
		rc = insn & 0x1f;

		switch (opcode) {
		      case OPC_PAL:
		      case OPC_JSR:
		      case 0x30 ... 0x3f:	/* branches */
			goto egress;

		      case OPC_MISC:
			switch (insn & 0xffff) {
			      case MISC_TRAPB:
			      case MISC_EXCB:
				goto egress;

			      default:
				break;
			}
			break;

		      case OPC_INTA:
		      case OPC_INTL:
		      case OPC_INTS:
		      case OPC_INTM:
			write_mask &= ~(1UL << rc);
			break;

		      case OPC_FLTC:
		      case OPC_FLTV:
		      case OPC_FLTI:
		      case OPC_FLTL:
			write_mask &= ~(1UL << (rc + 32));
			break;
		}
		if (!write_mask) {
			/* Re-execute insns in the trap-shadow.  */
			regs->pc = trigger_pc + 4;
			si_code = alpha_fp_emul(trigger_pc);
			goto egress;
		}
		trigger_pc -= 4;
	}

egress:
	return si_code;
}
back to top