Revision 18f5ed365d3f188a91149d528c853000330a4a58 authored by Takashi Sakamoto on 05 August 2015, 00:21:05 UTC, committed by Takashi Iwai on 05 August 2015, 05:52:39 UTC
Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface. This chip includes ARM7 core, and loads and runs program. The firmware is stored in on-board memory and loaded every powering-on from it. Echo Audio ships several versions of firmwares for each model. These firmwares have each quirk and the quirk changes a sequence of packets. As long as I investigated, AudioFire2/AudioFire4/AudioFirePre8 have a quirk to transfer a first packet with 0x02 in its dbc field. This causes ALSA Fireworks driver to detect discontinuity. In this case, firmware version 5.7.0, 5.7.3 and 5.8.0 are used. Payload CIP CIP quadlets header1 header2 02 00050002 90ffffff <- 42 0005000a 90013000 42 00050012 90014400 42 0005001a 90015800 02 0005001a 90ffffff 42 00050022 90019000 42 0005002a 9001a400 42 00050032 9001b800 02 00050032 90ffffff 42 0005003a 9001d000 42 00050042 9001e400 42 0005004a 9001f800 02 0005004a 90ffffff (AudioFire2 with firmware version 5.7.) $ dmesg snd-fireworks fw1.0: Detect discontinuity of CIP: 00 02 These models, AudioFire8 (since Jul 2009 ) and Gibson Robot Interface Pack series uses the same ARM binary as their firmware. Thus, this quirk may be observed among them. This commit adds a new member for AMDTP structure. This member represents the value of dbc field in a first AMDTP packet. Drivers can set it with a preferred value according to model's quirk. Tested-by: Johannes Oertei <johannes.oertel@uni-due.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
1 parent c85523d
fdtget.c
/*
* Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
*
* Portions from U-Boot cmd_fdt.c (C) Copyright 2007
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
* Based on code written by:
* Pantelis Antoniou <pantelis.antoniou@gmail.com> and
* Matthew McClintock <msm@freescale.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <assert.h>
#include <ctype.h>
#include <getopt.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <libfdt.h>
#include "util.h"
enum display_mode {
MODE_SHOW_VALUE, /* show values for node properties */
MODE_LIST_PROPS, /* list the properties for a node */
MODE_LIST_SUBNODES, /* list the subnodes of a node */
};
/* Holds information which controls our output and options */
struct display_info {
int type; /* data type (s/i/u/x or 0 for default) */
int size; /* data size (1/2/4) */
enum display_mode mode; /* display mode that we are using */
const char *default_val; /* default value if node/property not found */
};
static void report_error(const char *where, int err)
{
fprintf(stderr, "Error at '%s': %s\n", where, fdt_strerror(err));
}
/**
* Displays data of a given length according to selected options
*
* If a specific data type is provided in disp, then this is used. Otherwise
* we try to guess the data type / size from the contents.
*
* @param disp Display information / options
* @param data Data to display
* @param len Maximum length of buffer
* @return 0 if ok, -1 if data does not match format
*/
static int show_data(struct display_info *disp, const char *data, int len)
{
int i, size;
const uint8_t *p = (const uint8_t *)data;
const char *s;
int value;
int is_string;
char fmt[3];
/* no data, don't print */
if (len == 0)
return 0;
is_string = (disp->type) == 's' ||
(!disp->type && util_is_printable_string(data, len));
if (is_string) {
if (data[len - 1] != '\0') {
fprintf(stderr, "Unterminated string\n");
return -1;
}
for (s = data; s - data < len; s += strlen(s) + 1) {
if (s != data)
printf(" ");
printf("%s", (const char *)s);
}
return 0;
}
size = disp->size;
if (size == -1) {
size = (len % 4) == 0 ? 4 : 1;
} else if (len % size) {
fprintf(stderr, "Property length must be a multiple of "
"selected data size\n");
return -1;
}
fmt[0] = '%';
fmt[1] = disp->type ? disp->type : 'd';
fmt[2] = '\0';
for (i = 0; i < len; i += size, p += size) {
if (i)
printf(" ");
value = size == 4 ? fdt32_to_cpu(*(const uint32_t *)p) :
size == 2 ? (*p << 8) | p[1] : *p;
printf(fmt, value);
}
return 0;
}
/**
* List all properties in a node, one per line.
*
* @param blob FDT blob
* @param node Node to display
* @return 0 if ok, or FDT_ERR... if not.
*/
static int list_properties(const void *blob, int node)
{
const struct fdt_property *data;
const char *name;
int prop;
prop = fdt_first_property_offset(blob, node);
do {
/* Stop silently when there are no more properties */
if (prop < 0)
return prop == -FDT_ERR_NOTFOUND ? 0 : prop;
data = fdt_get_property_by_offset(blob, prop, NULL);
name = fdt_string(blob, fdt32_to_cpu(data->nameoff));
if (name)
puts(name);
prop = fdt_next_property_offset(blob, prop);
} while (1);
}
#define MAX_LEVEL 32 /* how deeply nested we will go */
/**
* List all subnodes in a node, one per line
*
* @param blob FDT blob
* @param node Node to display
* @return 0 if ok, or FDT_ERR... if not.
*/
static int list_subnodes(const void *blob, int node)
{
int nextoffset; /* next node offset from libfdt */
uint32_t tag; /* current tag */
int level = 0; /* keep track of nesting level */
const char *pathp;
int depth = 1; /* the assumed depth of this node */
while (level >= 0) {
tag = fdt_next_tag(blob, node, &nextoffset);
switch (tag) {
case FDT_BEGIN_NODE:
pathp = fdt_get_name(blob, node, NULL);
if (level <= depth) {
if (pathp == NULL)
pathp = "/* NULL pointer error */";
if (*pathp == '\0')
pathp = "/"; /* root is nameless */
if (level == 1)
puts(pathp);
}
level++;
if (level >= MAX_LEVEL) {
printf("Nested too deep, aborting.\n");
return 1;
}
break;
case FDT_END_NODE:
level--;
if (level == 0)
level = -1; /* exit the loop */
break;
case FDT_END:
return 1;
case FDT_PROP:
break;
default:
if (level <= depth)
printf("Unknown tag 0x%08X\n", tag);
return 1;
}
node = nextoffset;
}
return 0;
}
/**
* Show the data for a given node (and perhaps property) according to the
* display option provided.
*
* @param blob FDT blob
* @param disp Display information / options
* @param node Node to display
* @param property Name of property to display, or NULL if none
* @return 0 if ok, -ve on error
*/
static int show_data_for_item(const void *blob, struct display_info *disp,
int node, const char *property)
{
const void *value = NULL;
int len, err = 0;
switch (disp->mode) {
case MODE_LIST_PROPS:
err = list_properties(blob, node);
break;
case MODE_LIST_SUBNODES:
err = list_subnodes(blob, node);
break;
default:
assert(property);
value = fdt_getprop(blob, node, property, &len);
if (value) {
if (show_data(disp, value, len))
err = -1;
else
printf("\n");
} else if (disp->default_val) {
puts(disp->default_val);
} else {
report_error(property, len);
err = -1;
}
break;
}
return err;
}
/**
* Run the main fdtget operation, given a filename and valid arguments
*
* @param disp Display information / options
* @param filename Filename of blob file
* @param arg List of arguments to process
* @param arg_count Number of arguments
* @param return 0 if ok, -ve on error
*/
static int do_fdtget(struct display_info *disp, const char *filename,
char **arg, int arg_count, int args_per_step)
{
char *blob;
const char *prop;
int i, node;
blob = utilfdt_read(filename);
if (!blob)
return -1;
for (i = 0; i + args_per_step <= arg_count; i += args_per_step) {
node = fdt_path_offset(blob, arg[i]);
if (node < 0) {
if (disp->default_val) {
puts(disp->default_val);
continue;
} else {
report_error(arg[i], node);
return -1;
}
}
prop = args_per_step == 1 ? NULL : arg[i + 1];
if (show_data_for_item(blob, disp, node, prop))
return -1;
}
return 0;
}
static const char *usage_msg =
"fdtget - read values from device tree\n"
"\n"
"Each value is printed on a new line.\n\n"
"Usage:\n"
" fdtget <options> <dt file> [<node> <property>]...\n"
" fdtget -p <options> <dt file> [<node> ]...\n"
"Options:\n"
"\t-t <type>\tType of data\n"
"\t-p\t\tList properties for each node\n"
"\t-l\t\tList subnodes for each node\n"
"\t-d\t\tDefault value to display when the property is "
"missing\n"
"\t-h\t\tPrint this help\n\n"
USAGE_TYPE_MSG;
static void usage(const char *msg)
{
if (msg)
fprintf(stderr, "Error: %s\n\n", msg);
fprintf(stderr, "%s", usage_msg);
exit(2);
}
int main(int argc, char *argv[])
{
char *filename = NULL;
struct display_info disp;
int args_per_step = 2;
/* set defaults */
memset(&disp, '\0', sizeof(disp));
disp.size = -1;
disp.mode = MODE_SHOW_VALUE;
for (;;) {
int c = getopt(argc, argv, "d:hlpt:");
if (c == -1)
break;
switch (c) {
case 'h':
case '?':
usage(NULL);
case 't':
if (utilfdt_decode_type(optarg, &disp.type,
&disp.size))
usage("Invalid type string");
break;
case 'p':
disp.mode = MODE_LIST_PROPS;
args_per_step = 1;
break;
case 'l':
disp.mode = MODE_LIST_SUBNODES;
args_per_step = 1;
break;
case 'd':
disp.default_val = optarg;
break;
}
}
if (optind < argc)
filename = argv[optind++];
if (!filename)
usage("Missing filename");
argv += optind;
argc -= optind;
/* Allow no arguments, and silently succeed */
if (!argc)
return 0;
/* Check for node, property arguments */
if (args_per_step == 2 && (argc % 2))
usage("Must have an even number of arguments");
if (do_fdtget(&disp, filename, argv, argc, args_per_step))
return 1;
return 0;
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...