Revision 18f5ed365d3f188a91149d528c853000330a4a58 authored by Takashi Sakamoto on 05 August 2015, 00:21:05 UTC, committed by Takashi Iwai on 05 August 2015, 05:52:39 UTC
Fireworks uses TSB43CB43(IceLynx-Micro) as its IEC 61883-1/6 interface. This chip includes ARM7 core, and loads and runs program. The firmware is stored in on-board memory and loaded every powering-on from it. Echo Audio ships several versions of firmwares for each model. These firmwares have each quirk and the quirk changes a sequence of packets. As long as I investigated, AudioFire2/AudioFire4/AudioFirePre8 have a quirk to transfer a first packet with 0x02 in its dbc field. This causes ALSA Fireworks driver to detect discontinuity. In this case, firmware version 5.7.0, 5.7.3 and 5.8.0 are used. Payload CIP CIP quadlets header1 header2 02 00050002 90ffffff <- 42 0005000a 90013000 42 00050012 90014400 42 0005001a 90015800 02 0005001a 90ffffff 42 00050022 90019000 42 0005002a 9001a400 42 00050032 9001b800 02 00050032 90ffffff 42 0005003a 9001d000 42 00050042 9001e400 42 0005004a 9001f800 02 0005004a 90ffffff (AudioFire2 with firmware version 5.7.) $ dmesg snd-fireworks fw1.0: Detect discontinuity of CIP: 00 02 These models, AudioFire8 (since Jul 2009 ) and Gibson Robot Interface Pack series uses the same ARM binary as their firmware. Thus, this quirk may be observed among them. This commit adds a new member for AMDTP structure. This member represents the value of dbc field in a first AMDTP packet. Drivers can set it with a preferred value according to model's quirk. Tested-by: Johannes Oertei <johannes.oertel@uni-due.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
1 parent c85523d
objdiff
#!/bin/bash
# objdiff - a small script for validating that a commit or series of commits
# didn't change object code.
#
# Copyright 2014, Jason Cooper <jason@lakedaemon.net>
#
# Licensed under the terms of the GNU GPL version 2
# usage example:
#
# $ git checkout COMMIT_A
# $ <your fancy build command here>
# $ ./scripts/objdiff record path/to/*.o
#
# $ git checkout COMMIT_B
# $ <your fancy build command here>
# $ ./scripts/objdiff record path/to/*.o
#
# $ ./scripts/objdiff diff COMMIT_A COMMIT_B
# $
# And to clean up (everything is in .tmp_objdiff/*)
# $ ./scripts/objdiff clean all
#
# Note: 'make mrproper' will also remove .tmp_objdiff
SRCTREE=$(cd $(git rev-parse --show-toplevel 2>/dev/null); pwd)
if [ -z "$SRCTREE" ]; then
echo >&2 "ERROR: Not a git repository."
exit 1
fi
TMPD=$SRCTREE/.tmp_objdiff
usage() {
echo >&2 "Usage: $0 <command> <args>"
echo >&2 " record <list of object files or directories>"
echo >&2 " diff <commitA> <commitB>"
echo >&2 " clean all | <commit>"
exit 1
}
get_output_dir() {
dir=${1%/*}
if [ "$dir" = "$1" ]; then
dir=.
fi
dir=$(cd $dir; pwd)
echo $TMPD/$CMT${dir#$SRCTREE}
}
do_objdump() {
dir=$(get_output_dir $1)
base=${1##*/}
dis=$dir/${base%.o}.dis
[ ! -d "$dir" ] && mkdir -p $dir
# remove addresses for a cleaner diff
# http://dummdida.tumblr.com/post/60924060451/binary-diff-between-libc-from-scientificlinux-and
$OBJDUMP -D $1 | sed "s/^[[:space:]]\+[0-9a-f]\+//" > $dis
}
dorecord() {
[ $# -eq 0 ] && usage
FILES="$*"
CMT="`git rev-parse --short HEAD`"
OBJDUMP="${CROSS_COMPILE}objdump"
for d in $FILES; do
if [ -d "$d" ]; then
for f in $(find $d -name '*.o')
do
do_objdump $f
done
else
do_objdump $d
fi
done
}
dodiff() {
[ $# -ne 2 ] && [ $# -ne 0 ] && usage
if [ $# -eq 0 ]; then
SRC="`git rev-parse --short HEAD^`"
DST="`git rev-parse --short HEAD`"
else
SRC="`git rev-parse --short $1`"
DST="`git rev-parse --short $2`"
fi
DIFF="`which colordiff`"
if [ ${#DIFF} -eq 0 ] || [ ! -x "$DIFF" ]; then
DIFF="`which diff`"
fi
SRCD="$TMPD/$SRC"
DSTD="$TMPD/$DST"
if [ ! -d "$SRCD" ]; then
echo >&2 "ERROR: $SRCD doesn't exist"
exit 1
fi
if [ ! -d "$DSTD" ]; then
echo >&2 "ERROR: $DSTD doesn't exist"
exit 1
fi
$DIFF -Nurd $SRCD $DSTD
}
doclean() {
[ $# -eq 0 ] && usage
[ $# -gt 1 ] && usage
if [ "x$1" = "xall" ]; then
rm -rf $TMPD/*
else
CMT="`git rev-parse --short $1`"
if [ -d "$TMPD/$CMT" ]; then
rm -rf $TMPD/$CMT
else
echo >&2 "$CMT not found"
fi
fi
}
[ $# -eq 0 ] && usage
case "$1" in
record)
shift
dorecord $*
;;
diff)
shift
dodiff $*
;;
clean)
shift
doclean $*
;;
*)
echo >&2 "Unrecognized command '$1'"
exit 1
;;
esac
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...