| 19c176e | Jakub Kicinski | 26 October 2020, 23:45:53 UTC | Merge branch 'mlxsw-various-fixes' Ido Schimmel says: ==================== mlxsw: Various fixes This patch set contains various fixes for mlxsw. Patch #1 ensures that only link modes that are supported by both the device and the driver are advertised. When a link mode that is not supported by the driver is negotiated by the device, it will be presented as an unknown speed by ethtool, causing the bond driver to wrongly assume that the link is down. Patch #2 fixes a trivial memory leak upon module removal. Patch #3 fixes a use-after-free that syzkaller was able to trigger once on a slow emulator after a few months of fuzzing. ==================== Link: https://lore.kernel.org/r/20201024133733.2107509-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:45:53 UTC |
| 0daf2bf | Amit Cohen | 24 October 2020, 13:37:33 UTC | mlxsw: core: Fix use-after-free in mlxsw_emad_trans_finish() Each EMAD transaction stores the skb used to issue the EMAD request ('trans->tx_skb') so that the request could be retried in case of a timeout. The skb can be freed when a corresponding response is received or as part of the retry logic (e.g., failed retransmit, exceeded maximum number of retries). The two tasks (i.e., response processing and retransmits) are synchronized by the atomic 'trans->active' field which ensures that responses to inactive transactions are ignored. In case of a failed retransmit the transaction is finished and all of its resources are freed. However, the current code does not mark it as inactive. Syzkaller was able to hit a race condition in which a concurrent response is processed while the transaction's resources are being freed, resulting in a use-after-free [1]. Fix the issue by making sure to mark the transaction as inactive after a failed retransmit and free its resources only if a concurrent task did not already do that. [1] BUG: KASAN: use-after-free in consume_skb+0x30/0x370 net/core/skbuff.c:833 Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004 CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 instrument_atomic_read include/linux/instrumented.h:56 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] refcount_read include/linux/refcount.h:147 [inline] skb_unref include/linux/skbuff.h:1044 [inline] consume_skb+0x30/0x370 net/core/skbuff.c:833 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline] mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672 mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 Allocated by task 1006: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 slab_post_alloc_hook mm/slab.h:586 [inline] slab_alloc_node mm/slub.c:2824 [inline] slab_alloc mm/slub.c:2832 [inline] kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837 __build_skb+0x21/0x60 net/core/skbuff.c:311 __netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464 netdev_alloc_skb include/linux/skbuff.h:2810 [inline] mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline] mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline] mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817 mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831 mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline] mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365 mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037 devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765 genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline] genl_family_rcv_msg net/netlink/genetlink.c:714 [inline] genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470 genl_rcv+0x24/0x40 net/netlink/genetlink.c:742 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0x150/0x190 net/socket.c:671 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2359 ___sys_sendmsg+0xff/0x170 net/socket.c:2413 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2446 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 73: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kmem_cache_free+0xbe/0x380 mm/slub.c:3088 kfree_skbmem net/core/skbuff.c:622 [inline] kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:837 [inline] consume_skb+0xe1/0x370 net/core/skbuff.c:831 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613 mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88804f5703c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 212 bytes inside of 224-byte region [ffff88804f5703c0, ffff88804f5704a0) The buggy address belongs to the page: page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000200(slab) raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Fixes: caf7297e7ab5f ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:45:50 UTC |
| adc80b6 | Ido Schimmel | 24 October 2020, 13:37:32 UTC | mlxsw: core: Fix memory leak on module removal Free the devlink instance during the teardown sequence in the non-reload case to avoid the following memory leak. unreferenced object 0xffff888232895000 (size 2048): comm "modprobe", pid 1073, jiffies 4295568857 (age 164.871s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 10 50 89 32 82 88 ff ff 10 50 89 32 82 88 ff ff .P.2.....P.2.... backtrace: [<00000000c704e9a6>] __kmalloc+0x13a/0x2a0 [<00000000ee30129d>] devlink_alloc+0xff/0x760 [<0000000092ab3e5d>] 0xffffffffa042e5b0 [<000000004f3f8a31>] 0xffffffffa042f6ad [<0000000092800b4b>] 0xffffffffa0491df3 [<00000000c4843903>] local_pci_probe+0xcb/0x170 [<000000006993ded7>] pci_device_probe+0x2c2/0x4e0 [<00000000a8e0de75>] really_probe+0x2c5/0xf90 [<00000000d42ba75d>] driver_probe_device+0x1eb/0x340 [<00000000bcc95e05>] device_driver_attach+0x294/0x300 [<000000000e2bc177>] __driver_attach+0x167/0x2f0 [<000000007d44cd6e>] bus_for_each_dev+0x148/0x1f0 [<000000003cd5a91e>] driver_attach+0x45/0x60 [<000000000041ce51>] bus_add_driver+0x3b8/0x720 [<00000000f5215476>] driver_register+0x230/0x4e0 [<00000000d79356f5>] __pci_register_driver+0x190/0x200 Fixes: a22712a96291 ("mlxsw: core: Fix devlink unregister flow") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Vadim Pasternak <vadimp@nvidia.com> Tested-by: Oleksandr Shamray <oleksandrs@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:45:50 UTC |
| 1601559 | Amit Cohen | 24 October 2020, 13:37:31 UTC | mlxsw: Only advertise link modes supported by both driver and device During port creation the driver instructs the device to advertise all the supported link modes queried from the device. Since cited commit not all the link modes supported by the device are supported by the driver. This can result in the device negotiating a link mode that is not recognized by the driver causing ethtool to show an unsupported speed: $ ethtool swp1 ... Speed: Unknown! This is especially problematic when the netdev is enslaved to a bond, as the bond driver uses unknown speed as an indication that the link is down: [13048.900895] net_ratelimit: 86 callbacks suppressed [13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex [13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex Fix this by making sure that only link modes that are supported by both the device and the driver are advertised. Fixes: b97cd891268d ("mlxsw: Remove 56G speed support") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:45:50 UTC |
| 522ee51 | Jakub Kicinski | 26 October 2020, 23:29:38 UTC | Merge branch 'net-smc-fixes-2020-10-23' Karsten Graul says: ==================== net/smc: fixes 2020-10-23 Patch 1 fixes a potential null pointer dereference. Patch 2 takes care of a suppressed return code and patch 3 corrects the system EID in the ISM driver. ==================== Link: https://lore.kernel.org/r/20201023184830.59548-1-kgraul@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:29:38 UTC |
| 1dc0d1c | Karsten Graul | 23 October 2020, 18:48:30 UTC | s390/ism: fix incorrect system EID The system EID that is defined by the ISM driver is not correct. Using an incorrect system EID allows to communicate with remote Linux systems that use the same incorrect system EID, but when it comes to interoperability with other operating systems then the system EIDs do never match which prevents SMC-Dv2 communication. Using the correct system EID fixes this problem. Fixes: 201091ebb2a1 ("net/smc: introduce System Enterprise ID (SEID)") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:29:14 UTC |
| 96d6fde | Karsten Graul | 23 October 2020, 18:48:29 UTC | net/smc: fix suppressed return code The patch that repaired the invalid return code in smcd_new_buf_create() missed to take care of errno ENOSPC which has a special meaning that no more DMBEs can be registered on the device. Fix that by keeping this errno value during the translation of the return code. Fixes: 6b1bbf94ab36 ("net/smc: fix invalid return code in smcd_new_buf_create()") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:29:14 UTC |
| 4a9baf4 | Karsten Graul | 23 October 2020, 18:48:28 UTC | net/smc: fix null pointer dereference in smc_listen_decline() smc_listen_work() calls smc_listen_decline() on label out_decl, providing the ini pointer variable. But this pointer can still be null when the label out_decl is reached. Fix this by checking the ini variable in smc_listen_work() and call smc_listen_decline() with the result directly. Fixes: a7c9c5f4af7f ("net/smc: CLC accept / confirm V2") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:29:14 UTC |
| af545bb | Jeff Vander Stoep | 23 October 2020, 14:37:57 UTC | vsock: use ns_capable_noaudit() on socket create During __vsock_create() CAP_NET_ADMIN is used to determine if the vsock_sock->trusted should be set to true. This value is used later for determing if a remote connection should be allowed to connect to a restricted VM. Unfortunately, if the caller doesn't have CAP_NET_ADMIN, an audit message such as an selinux denial is generated even if the caller does not want a trusted socket. Logging errors on success is confusing. To avoid this, switch the capable(CAP_NET_ADMIN) check to the noaudit version. Reported-by: Roman Kiryanov <rkir@google.com> https://android-review.googlesource.com/c/device/generic/goldfish/+/1468545/ Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/r/20201023143757.377574-1-jeffv@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:22:42 UTC |
| 937d842 | Raju Rangoju | 23 October 2020, 11:58:52 UTC | cxgb4: set up filter action after rewrites The current code sets up the filter action field before rewrites are set up. When the action 'switch' is used with rewrites, this may result in initial few packets that get switched out don't have rewrites applied on them. So, make sure filter action is set up along with rewrites or only after everything else is set up for rewrites. Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Link: https://lore.kernel.org/r/20201023115852.18262-1-rajur@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:18:18 UTC |
| ee7a376 | Dan Carpenter | 23 October 2020, 11:22:12 UTC | net: hns3: clean up a return in hclge_tm_bp_setup() Smatch complains that "ret" might be uninitialized if we don't enter the loop. We do always enter the loop so it's a false positive, but it's cleaner to just return a literal zero and that silences the warning as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201023112212.GA282278@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 26 October 2020, 23:16:23 UTC |
| 4525c87 | Linus Torvalds | 26 October 2020, 22:45:22 UTC | scsi: qla2xxx: remove incorrect sparse #ifdef The code to try to shut up sparse warnings about questionable locking didn't shut up sparse: it made the result not parse as valid C at all, since the end result now has a label with no statement. The proper fix is to just always lock the hardware, the same way Bart did in commit 8ae178760b23 ("scsi: qla2xxx: Simplify the functions for dumping firmware"). That avoids the whole problem with having locking that is not statically obvious. But in the meantime, just remove the incorrect attempt at trying to avoid a sparse warning that just made things worse. This was exposed by commit 3e6efab865ac ("scsi: qla2xxx: Fix reset of MPI firmware"), very similarly to how commit cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") exposed the same problem in another place, and caused that commit 8ae178760b23. Please don't add code to just shut up sparse without actually fixing what sparse complains about. Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Arun Easi <aeasi@marvell.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 October 2020, 22:45:22 UTC |
| bf9a76a | Linus Torvalds | 26 October 2020, 22:39:37 UTC | arch/um: partially revert the conversion to __section() macro A couple of um files ended up not including the header file that defines the __section() macro, and the simplest fix is to just revert the change for those files. Fixes: 33def8498fdd treewide: Convert macro and uses of __section(foo) to __section("foo") Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 October 2020, 22:39:37 UTC |
| 7d66a71 | Gal Pressman | 26 October 2020, 08:26:21 UTC | RDMA/uverbs: Fix false error in query gid IOCTL Some drivers (such as EFA) have a GID table, but aren't IB/RoCE devices. Remove the unnecessary rdma_ib_or_roce() check. This fixes rdma-core failures for EFA when it uses the new ioctl interface for querying the GID table. Fixes: 9f85cbe50aa0 ("RDMA/uverbs: Expose the new GID query API to user space") Link: https://lore.kernel.org/r/20201026082621.32463-1-galpress@amazon.com Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> | 26 October 2020, 22:29:26 UTC |
| fbdd004 | Parav Pandit | 26 October 2020, 13:43:59 UTC | RDMA/mlx5: Fix devlink deadlock on net namespace deletion When a mlx5 core devlink instance is reloaded in different net namespace, its associated IB device is deleted and recreated. Example sequence is: $ ip netns add foo $ devlink dev reload pci/0000:00:08.0 netns foo $ ip netns del foo mlx5 IB device needs to attach and detach the netdevice to it through the netdev notifier chain during load and unload sequence. A below call graph of the unload flow. cleanup_net() down_read(&pernet_ops_rwsem); <- first sem acquired ops_pre_exit_list() pre_exit() devlink_pernet_pre_exit() devlink_reload() mlx5_devlink_reload_down() mlx5_unload_one() [...] mlx5_ib_remove() mlx5_ib_unbind_slave_port() mlx5_remove_netdev_notifier() unregister_netdevice_notifier() down_write(&pernet_ops_rwsem);<- recurrsive lock Hence, when net namespace is deleted, mlx5 reload results in deadlock. When deadlock occurs, devlink mutex is also held. This not only deadlocks the mlx5 device under reload, but all the processes which attempt to access unrelated devlink devices are deadlocked. Hence, fix this by mlx5 ib driver to register for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Link: https://lore.kernel.org/r/20201026134359.23150-1-parav@nvidia.com Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> | 26 October 2020, 22:18:19 UTC |
| edebc84 | Bob Pearson | 16 October 2020, 21:13:44 UTC | RDMA/rxe: Fix small problem in network_type patch The patch referenced below has a typo that results in using the wrong L2 header size for outbound traffic. (V4 <-> V6). It also breaks kernel-side RC traffic because they use AVs that use RDMA_NETWORK_XXX enums instead of RXE_NETWORK_TYPE_XXX enums. Fix this by transcoding between these enum types. Fixes: e0d696d201dd ("RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI") Link: https://lore.kernel.org/r/20201016211343.22906-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> | 26 October 2020, 22:12:17 UTC |
| f84e2c5 | Rob Herring | 06 October 2020, 17:19:08 UTC | dt-bindings: Another round of adding missing 'additionalProperties/unevalutatedProperties' Another round of wack-a-mole. The json-schema default is additional unknown properties are allowed, but for DT all properties should be defined. Signed-off-by: Rob Herring <robh@kernel.org> | 26 October 2020, 21:13:56 UTC |
| 6229836 | Rob Herring | 05 October 2020, 18:38:29 UTC | dt-bindings: Explicitly allow additional properties in board/SoC schemas In order to add meta-schema checks for additional/unevaluatedProperties being present, all schema need to make this explicit. As the top-level board/SoC schemas always have additional properties, add 'additionalProperties: true'. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201005183830.486085-4-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 26 October 2020, 21:13:56 UTC |
| 6ad8838 | Rob Herring | 21 April 2020, 02:24:47 UTC | dt-bindings: More whitespace clean-ups in schema files Clean-up incorrect indentation, extra spaces, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (now integrated into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-gpio@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sam Ravnborg <sam@ravnborg.org> # for display Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Signed-off-by: Rob Herring <robh@kernel.org> | 26 October 2020, 21:13:56 UTC |
| 5c024e6 | Ricardo Cañuelo | 21 October 2020, 11:43:08 UTC | mfd: google,cros-ec: add missing properties Add missing properties that are currently used in the examples of subnode bindings and in many DTs. Also updates the example in sound/google,cros-ec-codec.yaml to comply with the google,cros-ec binding. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Link: https://lore.kernel.org/r/20201021114308.25485-4-ricardo.canuelo@collabora.com [robh: Add missing '#address-cells' and '#size-cells'] Signed-off-by: Rob Herring <robh@kernel.org> | 26 October 2020, 21:13:56 UTC |
| 50d68fe | Ricardo Cañuelo | 21 October 2020, 11:43:07 UTC | dt-bindings: input: convert cros-ec-keyb to json-schema Convert the google,cros-ec-keyb binding to YAML and add it as a property of google,cros-ec.yaml Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Link: https://lore.kernel.org/r/20201021114308.25485-3-ricardo.canuelo@collabora.com Signed-off-by: Rob Herring <robh@kernel.org> | 26 October 2020, 21:13:56 UTC |
| 1acd457 | Ricardo Cañuelo | 21 October 2020, 11:43:06 UTC | dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema Convert the google,cros-ec-i2c-tunnel binding to YAML and add it as a property of google,cros-ec.yaml. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Link: https://lore.kernel.org/r/20201021114308.25485-2-ricardo.canuelo@collabora.com [robh: add ref to i2c-controller.yaml] Signed-off-by: Rob Herring <robh@kernel.org> | 26 October 2020, 21:13:22 UTC |
| 41ba50b | Linus Torvalds | 26 October 2020, 17:43:52 UTC | Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a regression in x86/poly1305" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/poly1305 - add back a needed assignment | 26 October 2020, 17:43:52 UTC |
| 9480b4e | Matthew Wilcox (Oracle) | 26 October 2020, 09:12:10 UTC | cachefiles: Handle readpage error correctly If ->readpage returns an error, it has already unlocked the page. Fixes: 5e929b33c393 ("CacheFiles: Handle truncate unlocking the page we're reading") Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 October 2020, 17:42:54 UTC |
| 7e2b2da | Linus Torvalds | 26 October 2020, 17:36:21 UTC | Merge tag 's390-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fix from Heiko Carstens: "Fix s390 compile breakage caused by commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")")" * tag 's390-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: correct __bootdata / __bootdata_preserved macros | 26 October 2020, 17:36:21 UTC |
| 8e90b4b | Vasily Gorbik | 26 October 2020, 09:52:26 UTC | s390: correct __bootdata / __bootdata_preserved macros Currently s390 build is broken. SECTCMP .boot.data error: section .boot.data differs between vmlinux and arch/s390/boot/compressed/vmlinux make[2]: *** [arch/s390/boot/section_cmp.boot.data] Error 1 SECTCMP .boot.preserved.data error: section .boot.preserved.data differs between vmlinux and arch/s390/boot/compressed/vmlinux make[2]: *** [arch/s390/boot/section_cmp.boot.preserved.data] Error 1 make[1]: *** [bzImage] Error 2 Commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") converted all __section(foo) to __section("foo"). This is wrong for __bootdata / __bootdata_preserved macros which want variable names to be a part of intermediate section names .boot.data.<var name> and .boot.preserved.data.<var name>. Those sections are later sorted by alignment + name and merged together into final .boot.data / .boot.preserved.data sections. Those sections must be identical in the decompressor and the decompressed kernel (that is checked during the build). Fixes: 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> | 26 October 2020, 13:18:01 UTC |
| ca05f33 | Vincent Whitchurch | 21 October 2020, 09:53:59 UTC | of: Fix reserved-memory overlap detection The reserved-memory overlap detection code fails to detect overlaps if either of the regions starts at address 0x0. The code explicitly checks for and ignores such regions, apparently in order to ignore dynamically allocated regions which have an address of 0x0 at this point. These dynamically allocated regions also have a size of 0x0 at this point, so fix this by removing the check and sorting the dynamically allocated regions ahead of any static regions at address 0x0. For example, there are two overlaps in this case but they are not currently reported: foo@0 { reg = <0x0 0x2000>; }; bar@0 { reg = <0x0 0x1000>; }; baz@1000 { reg = <0x1000 0x1000>; }; quux { size = <0x1000>; }; but they are after this patch: OF: reserved mem: OVERLAP DETECTED! bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000) OF: reserved mem: OVERLAP DETECTED! foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000) Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com Signed-off-by: Rob Herring <robh@kernel.org> | 26 October 2020, 01:37:55 UTC |
| f83b03f | Fabien Parent | 18 October 2020, 19:30:16 UTC | dt-bindings: mailbox: mtk-gce: fix incorrect mbox-cells value As the binding documentation says, #mbox-cells must have a value of 2, but the example use a value 3. The MT8173 device tree correctly use mbox-cells = <2>. This commit fixes the example. Fixes: 19d8e335d58a ("dt-binding: gce: remove atomic_exec in mboxes property") Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20201018193016.3339045-1-fparent@baylibre.com Signed-off-by: Rob Herring <robh@kernel.org> | 26 October 2020, 01:37:55 UTC |
| 194810f | Dan Murphy | 16 October 2020, 11:57:03 UTC | dt-bindings: leds: Update devicetree documents for ID_RGB Update the leds/common.yaml to indicate that the max color ID is 9. Reflect the same change in the leds-class-multicolor.yaml Reported-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20201016115703.30184-1-dmurphy@ti.com Signed-off-by: Rob Herring <robh@kernel.org> | 26 October 2020, 01:37:54 UTC |
| 3650b22 | Linus Torvalds | 25 October 2020, 22:14:11 UTC | Linux 5.10-rc1 | 25 October 2020, 22:14:11 UTC |
| 33def84 | Joe Perches | 22 October 2020, 02:36:07 UTC | treewide: Convert macro and uses of __section(foo) to __section("foo") Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 October 2020, 21:51:49 UTC |
| 986b9ea | Rasmus Villemoes | 24 October 2020, 01:04:26 UTC | kernel/sys.c: fix prototype of prctl_get_tid_address() tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 October 2020, 18:44:16 UTC |
| 23224e4 | Eric Biggers | 23 October 2020, 23:27:16 UTC | mm: remove kzfree() compatibility definition Commit 453431a54934 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 October 2020, 18:39:02 UTC |
| 0f7f635 | Joe Perches | 24 October 2020, 23:59:04 UTC | checkpatch: enable GIT_DIR environment use to set git repository location If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 October 2020, 18:36:33 UTC |
| 672f887 | Linus Torvalds | 25 October 2020, 18:28:49 UTC | Merge tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset | 25 October 2020, 18:28:49 UTC |
| 87702a3 | Linus Torvalds | 25 October 2020, 18:25:16 UTC | Merge tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array | 25 October 2020, 18:25:16 UTC |
| a3d1b31 | Linus Torvalds | 25 October 2020, 18:22:59 UTC | Merge tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single fix to compute the field offset of the SNOOPX bit in the data source bitmask of perf events correctly" * tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: correct SNOOPX field offset | 25 October 2020, 18:22:59 UTC |
| 1c84550 | Linus Torvalds | 25 October 2020, 18:14:54 UTC | Merge tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Thomas Gleixner: "Just a trivial fix for kernel-doc warnings" * tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/seqlocks: Fix kernel-doc warnings | 25 October 2020, 18:14:54 UTC |
| e5acf0e | Linus Torvalds | 25 October 2020, 18:12:31 UTC | Merge tag 'ntb-5.10' of git://github.com/jonmason/ntb Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources | 25 October 2020, 18:12:31 UTC |
| 0746c4a | Linus Torvalds | 25 October 2020, 18:10:23 UTC | Merge branch 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Regression fix for rc1 and stable kernels as well" * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs | 25 October 2020, 18:10:23 UTC |
| c10037f | Linus Torvalds | 25 October 2020, 18:05:04 UTC | Merge tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6 Pull more cifs updates from Steve French: "Add support for stat of various special file types (WSL reparse points for char, block, fifo)" * tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number smb3: add some missing definitions from MS-FSCC smb3: remove two unused variables smb3: add support for stat of WSL reparse points for special file types | 25 October 2020, 18:05:04 UTC |
| f9c25d9 | Linus Torvalds | 25 October 2020, 17:59:34 UTC | Merge branch 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time | 25 October 2020, 17:59:34 UTC |
| bd6aabc | Linus Torvalds | 25 October 2020, 17:55:35 UTC | Merge tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants | 25 October 2020, 17:55:35 UTC |
| 81ecf91 | Linus Torvalds | 25 October 2020, 17:45:26 UTC | Merge tag 'safesetid-5.10' of git://github.com/micah-morton/linux Pull SafeSetID updates from Micah Morton: "The changes are mostly contained to within the SafeSetID LSM, with the exception of a few 1-line changes to change some ns_capable() calls to ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that is examined by SafeSetID code and nothing else in the kernel. The changes to SafeSetID internally allow for setting up GID transition security policies, as already existed for UIDs" * tag 'safesetid-5.10' of git://github.com/micah-morton/linux: LSM: SafeSetID: Fix warnings reported by test bot LSM: SafeSetID: Add GID security policy handling LSM: Signal to SafeSetID when setting group IDs | 25 October 2020, 17:45:26 UTC |
| 91f28da | Linus Torvalds | 25 October 2020, 17:40:08 UTC | Merge tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom Pull random32 updates from Willy Tarreau: "Make prandom_u32() less predictable. This is the cleanup of the latest series of prandom_u32 experimentations consisting in using SipHash instead of Tausworthe to produce the randoms used by the network stack. The changes to the files were kept minimal, and the controversial commit that used to take noise from the fast_pool (f227e3ec3b5c) was reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is fed from various sources of activities (networking, scheduling) to perturb the SipHash state using fast, non-trivially predictable data, instead of keeping it fully deterministic. The goal is essentially to make any occasional memory leakage or brute-force attempt useless. The resulting code was verified to be very slightly faster on x86_64 than what is was with the controversial commit above, though this remains barely above measurement noise. It was also tested on i386 and arm, and build- tested only on arm64" Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ * tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom: random32: add a selftest for the prandom32 code random32: add noise from network and scheduling activity random32: make prandom_u32() output unpredictable | 25 October 2020, 17:40:08 UTC |
| 8058d69 | Hans de Goede | 14 October 2020, 14:41:58 UTC | i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")'s intention was to only move the acpi_install_address_space_handler() call to the point before where the ACPI declared i2c-children of the adapter where instantiated by i2c_acpi_register_devices(). But i2c_acpi_install_space_handler() had a call to acpi_walk_dep_device_list() hidden (that is I missed it) at the end of it, so as an unwanted side-effect now acpi_walk_dep_device_list() was also being called before i2c_acpi_register_devices(). Move the acpi_walk_dep_device_list() call to the end of i2c_acpi_register_devices(), so that it is once again called *after* the i2c_client-s hanging of the adapter have been created. This fixes the Microsoft Surface Go 2 hanging at boot. Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627 Reported-by: Rainer Finke <rainer@finke.cc> Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Suggested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> | 25 October 2020, 12:33:54 UTC |
| d769139 | Linus Torvalds | 24 October 2020, 19:46:42 UTC | Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - NVMe pull request from Christoph - rdma error handling fixes (Chao Leng) - fc error handling and reconnect fixes (James Smart) - fix the qid displace when tracing ioctl command (Keith Busch) - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni) - fix MTDT for passthru (Logan Gunthorpe) - blacklist Write Same on more devices (Kai-Heng Feng) - fix an uninitialized work struct (zhenwei pi)" - lightnvm out-of-bounds fix (Colin) - SG allocation leak fix (Doug) - rnbd fixes (Gioh, Guoqing, Jack) - zone error translation fixes (Keith) - kerneldoc markup fix (Mauro) - zram lockdep fix (Peter) - Kill unused io_context members (Yufen) - NUMA memory allocation cleanup (Xianting) - NBD config wakeup fix (Xiubo) * tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits) block: blk-mq: fix a kernel-doc markup nvme-fc: shorten reconnect delay if possible for FC nvme-fc: wait for queues to freeze before calling update_hr_hw_queues nvme-fc: fix error loop in create_hw_io_queues nvme-fc: fix io timeout to abort I/O null_blk: use zone status for max active/open nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru nvmet: cleanup nvmet_passthru_map_sg() nvmet: limit passthru MTDS by BIO_MAX_PAGES nvmet: fix uninitialized work for zero kato nvme-pci: disable Write Zeroes on Sandisk Skyhawk nvme: use queuedata for nvme_req_qid nvme-rdma: fix crash due to incorrect cqe nvme-rdma: fix crash when connect rejected block: remove unused members for io_context blk-mq: remove the calling of local_memory_node() zram: Fix __zram_bvec_{read,write}() locking order skd_main: remove unused including <linux/version.h> sgl_alloc_order: fix memory leak lightnvm: fix out-of-bounds write to array devices->info[] ... | 24 October 2020, 19:46:42 UTC |
| af00418 | Linus Torvalds | 24 October 2020, 19:40:18 UTC | Merge tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: - fsize was missed in previous unification of work flags - Few fixes cleaning up the flags unification creds cases (Pavel) - Fix NUMA affinities for completely unplugged/replugged node for io-wq - Two fallout fixes from the set_fs changes. One local to io_uring, one for the splice entry point that io_uring uses. - Linked timeout fixes (Pavel) - Removal of ->flush() ->files work-around that we don't need anymore with referenced files (Pavel) - Various cleanups (Pavel) * tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block: splice: change exported internal do_splice() helper to take kernel offset io_uring: make loop_rw_iter() use original user supplied pointers io_uring: remove req cancel in ->flush() io-wq: re-set NUMA node affinities if CPUs come online io_uring: don't reuse linked_timeout io_uring: unify fsize with def->work_flags io_uring: fix racy REQ_F_LINK_TIMEOUT clearing io_uring: do poll's hash_node init in common code io_uring: inline io_poll_task_handler() io_uring: remove extra ->file check in poll prep io_uring: make cached_cq_overflow non atomic_t io_uring: inline io_fail_links() io_uring: kill ref get/drop in personality init io_uring: flags-based creds init in queue | 24 October 2020, 19:40:18 UTC |
| cb6b289 | Linus Torvalds | 24 October 2020, 19:36:24 UTC | Merge tag 'libata-5.10-2020-10-24' of git://git.kernel.dk/linux-block Pull libata fixes from Jens Axboe: "Two minor libata fixes: - Fix a DMA boundary mask regression for sata_rcar (Geert) - kerneldoc markup fix (Mauro)" * tag 'libata-5.10-2020-10-24' of git://git.kernel.dk/linux-block: ata: fix some kernel-doc markups ata: sata_rcar: Fix DMA boundary mask | 24 October 2020, 19:36:24 UTC |
| 0eac110 | Linus Torvalds | 24 October 2020, 19:26:05 UTC | Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff all over the place (the largest group here is Christoph's stat cleanups)" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: remove KSTAT_QUERY_FLAGS fs: remove vfs_stat_set_lookup_flags fs: move vfs_fstatat out of line fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat fs: remove vfs_statx_fd fs: omfs: use kmemdup() rather than kmalloc+memcpy [PATCH] reduce boilerplate in fsid handling fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS selftests: mount: add nosymfollow tests Add a "nosymfollow" mount option. | 24 October 2020, 19:26:05 UTC |
| 1b307ac | Linus Torvalds | 24 October 2020, 19:17:05 UTC | Merge tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - document the new dma_{alloc,free}_pages() API - two fixups for the dma-mapping.h split * tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: document dma_{alloc,free}_pages dma-mapping: move more functions to dma-map-ops.h ARM/sa1111: add a missing include of dma-map-ops.h | 24 October 2020, 19:17:05 UTC |
| 9bf8d8b | Linus Torvalds | 24 October 2020, 19:09:22 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "Two fixes for this merge window, and an unrelated bugfix for a host hang" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: ioapic: break infinite recursion on lazy EOI KVM: vmx: rename pi_init to avoid conflict with paride KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 build | 24 October 2020, 19:09:22 UTC |
| c51ae12 | Linus Torvalds | 24 October 2020, 18:49:32 UTC | Merge tag 'x86_seves_fixes_for_v5.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV-ES fixes from Borislav Petkov: "Three fixes to SEV-ES to correct setting up the new early pagetable on 5-level paging machines, to always map boot_params and the kernel cmdline, and disable stack protector for ../compressed/head{32,64}.c. (Arvind Sankar)" * tag 'x86_seves_fixes_for_v5.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/64: Explicitly map boot_params and command line x86/head/64: Disable stack protection for head$(BITS).o x86/boot/64: Initialize 5-level paging variables earlier | 24 October 2020, 18:49:32 UTC |
| c6e169b | Willy Tarreau | 24 October 2020, 16:36:27 UTC | random32: add a selftest for the prandom32 code Given that this code is new, let's add a selftest for it as well. It doesn't rely on fixed sets, instead it picks 1024 numbers and verifies that they're not more correlated than desired. Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> | 24 October 2020, 18:21:57 UTC |
| 3744741 | Willy Tarreau | 10 August 2020, 08:27:42 UTC | random32: add noise from network and scheduling activity With the removal of the interrupt perturbations in previous random32 change (random32: make prandom_u32() output unpredictable), the PRNG has become 100% deterministic again. While SipHash is expected to be way more robust against brute force than the previous Tausworthe LFSR, there's still the risk that whoever has even one temporary access to the PRNG's internal state is able to predict all subsequent draws till the next reseed (roughly every minute). This may happen through a side channel attack or any data leak. This patch restores the spirit of commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") in that it will perturb the internal PRNG's statee using externally collected noise, except that it will not pick that noise from the random pool's bits nor upon interrupt, but will rather combine a few elements along the Tx path that are collectively hard to predict, such as dev, skb and txq pointers, packet length and jiffies values. These ones are combined using a single round of SipHash into a single long variable that is mixed with the net_rand_state upon each invocation. The operation was inlined because it produces very small and efficient code, typically 3 xor, 2 add and 2 rol. The performance was measured to be the same (even very slightly better) than before the switch to SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC (i40e), the connection rate dropped from 556k/s to 555k/s while the SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps. Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> | 24 October 2020, 18:21:57 UTC |
| c51f8f8 | George Spelvin | 09 August 2020, 06:57:44 UTC | random32: make prandom_u32() output unpredictable Non-cryptographic PRNGs may have great statistical properties, but are usually trivially predictable to someone who knows the algorithm, given a small sample of their output. An LFSR like prandom_u32() is particularly simple, even if the sample is widely scattered bits. It turns out the network stack uses prandom_u32() for some things like random port numbers which it would prefer are *not* trivially predictable. Predictability led to a practical DNS spoofing attack. Oops. This patch replaces the LFSR with a homebrew cryptographic PRNG based on the SipHash round function, which is in turn seeded with 128 bits of strong random key. (The authors of SipHash have *not* been consulted about this abuse of their algorithm.) Speed is prioritized over security; attacks are rare, while performance is always wanted. Replacing all callers of prandom_u32() is the quick fix. Whether to reinstate a weaker PRNG for uses which can tolerate it is an open question. Commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") was an earlier attempt at a solution. This patch replaces it. Reported-by: Amit Klein <aksecurity@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ [ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions to prandom.h for later use; merged George's prandom_seed() proposal; inlined siprand_u32(); replaced the net_rand_state[] array with 4 members to fix a build issue; cosmetic cleanups to make checkpatch happy; fixed RANDOM32_SELFTEST build ] Signed-off-by: Willy Tarreau <w@1wt.eu> | 24 October 2020, 18:21:57 UTC |
| b6f96e7 | Linus Torvalds | 24 October 2020, 18:09:13 UTC | Merge tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the emulation of VSX loads. The affected CPUs were not widely available. - Two fixes for machine check handling in guests under PowerVM. - A fix for our recent changes to SMP setup, when CONFIG_CPUMASK_OFFSTACK=y. - Three fixes for races in the handling of some of our powernv sysfs attributes. - One change to remove TM from the set of Power10 CPU features. - A couple of other minor fixes. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan Niethe, Mahesh Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai, Srikar Dronamraju, Vasant Hegde. * tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Avoid using addr_to_pfn in real mode powerpc/uaccess: Don't use "m<>" constraint with GCC 4.9 powerpc/eeh: Fix eeh_dev_check_failure() for PE#0 powerpc/64s: Remove TM from Power10 features selftests/powerpc: Make alignment handler test P9N DD2.1 vector CI load workaround powerpc: Fix undetected data corruption with P9N DD2.1 VSX CI load emulation powerpc/powernv/dump: Handle multiple writes to ack attribute powerpc/powernv/dump: Fix race while processing OPAL dump powerpc/smp: Use GFP_ATOMIC while allocating tmp mask powerpc/smp: Remove unnecessary variable powerpc/mce: Avoid nmi_enter/exit in real mode on pseries hash powerpc/opal_elog: Handle multiple writes to ack attribute | 24 October 2020, 18:09:13 UTC |
| 0593c1b | Linus Torvalds | 24 October 2020, 17:57:57 UTC | Merge tag 'riscv-for-linus-5.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "Just a single patch set: the remainder of Christoph's work to remove set_fs, including the RISC-V portion" * tag 'riscv-for-linus-5.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove address space overrides using set_fs() riscv: implement __get_kernel_nofault and __put_user_nofault riscv: refactor __get_user and __put_user riscv: use memcpy based uaccess for nommu again asm-generic: make the set_fs implementation optional asm-generic: add nommu implementations of __{get,put}_kernel_nofault asm-generic: improve the nommu {get,put}_user handling uaccess: provide a generic TASK_SIZE_MAX definition | 24 October 2020, 17:57:57 UTC |
| 45fe605 | Linus Torvalds | 24 October 2020, 17:53:04 UTC | Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits) ARM: multi_v7_defconfig: add FMC2 EBI controller support arm64: defconfig: enable Qualcomm ASoC modules arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50 arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets arm64: defconfig: enable the sl28cpld board management controller arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers arm64: defconfig: Enable Qcom SNPS Femto PHY ARM: configs: Update Realview defconfig ARM: configs: Update Versatile defconfig ARM: config: aspeed_g5: Enable IBM OP Panel driver ARM: config: aspeed-g5: Enable I2C GPIO mux driver ARM: config: aspeed: Fix selection of media drivers arm64: defconfig: Enable Samsung S3FWRN5 NFC driver ARM: omap2plus_defconfig: enable generic net options ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC arm64: defconfig: Build ADMA and ACONNECT driver arm64: defconfig: Build AHUB component drivers arm64: defconfig: Enable Lontium LT9611 driver arm64: defcondfig: Enable USB ACM and FTDI drivers ... | 24 October 2020, 17:53:04 UTC |
| e533cda | Linus Torvalds | 24 October 2020, 17:44:18 UTC | Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ... | 24 October 2020, 17:44:18 UTC |
| 2e368dd | Linus Torvalds | 24 October 2020, 17:39:22 UTC | Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ... | 24 October 2020, 17:39:22 UTC |
| e731f31 | Linus Torvalds | 24 October 2020, 17:33:08 UTC | Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ... | 24 October 2020, 17:33:08 UTC |
| 1f70935 | Linus Torvalds | 24 October 2020, 17:26:06 UTC | Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the merge window batch instead. Mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 soc: actions: include header to fix missing prototype arm64: dts: ti: k3-j721e: Rename mux header and update macro names soc: qcom: pdr: Fixup array type of get_domain_list_resp message arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 arm64: dts: sdm630: Temporarily disable SMMUs by default arm64: dts: sdm845: Fixup OPP table for all qup devices arm64: dts: allwinner: h5: remove Mali GPU PMU module ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator soc: xilinx: Fix error code in zynqmp_pm_probe() | 24 October 2020, 17:26:06 UTC |
| 7737706 | Vitaly Kuznetsov | 24 October 2020, 08:13:24 UTC | KVM: ioapic: break infinite recursion on lazy EOI During shutdown the IOAPIC trigger mode is reset to edge triggered while the vfio-pci INTx is still registered with a resampler. This allows us to get into an infinite loop: ioapic_set_irq -> ioapic_lazy_update_eoi -> kvm_ioapic_update_eoi_one -> kvm_notify_acked_irq -> kvm_notify_acked_gsi -> (via irq_acked fn ptr) irqfd_resampler_ack -> kvm_set_irq -> (via set fn ptr) kvm_set_ioapic_irq -> kvm_ioapic_set_irq -> ioapic_set_irq Commit 8be8f932e3db ("kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts", 2020-05-04) acknowledges that this recursion loop exists and tries to avoid it at the call to ioapic_lazy_update_eoi, but at this point the scenario is already set, we have an edge interrupt with resampler on the same gsi. Fortunately, the only user of irq ack notifiers (in addition to resamplefd) is i8254 timer interrupt reinjection. These are edge-triggered, so in principle they would need the call to kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi, but they already disable AVIC(*), so they don't need the lazy EOI behavior. Therefore, remove the call to kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi. This fixes CVE-2020-27152. Note that this issue cannot happen with SR-IOV assigned devices because virtual functions do not have INTx, only MSI. Fixes: f458d039db7e ("kvm: ioapic: Lazy update IOAPIC EOI") Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 24 October 2020, 08:42:06 UTC |
| a3ff25f | Paolo Bonzini | 24 October 2020, 08:08:37 UTC | KVM: vmx: rename pi_init to avoid conflict with paride allyesconfig results in: ld: drivers/block/paride/paride.o: in function `pi_init': (.text+0x1340): multiple definition of `pi_init'; arch/x86/kvm/vmx/posted_intr.o:posted_intr.c:(.init.text+0x0): first defined here make: *** [Makefile:1164: vmlinux] Error 1 because commit: commit 8888cdd0996c2d51cd417f9a60a282c034f3fa28 Author: Xiaoyao Li <xiaoyao.li@intel.com> Date: Wed Sep 23 11:31:11 2020 -0700 KVM: VMX: Extract posted interrupt support to separate files added another pi_init(), though one already existed in the paride code. Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 24 October 2020, 08:09:54 UTC |
| 764388c | Sean Christopherson | 24 October 2020, 03:11:50 UTC | KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 build Replace a modulo operator with the more common pattern for computing the gfn "offset" of a huge page to fix an i386 build error. arch/x86/kvm/mmu/tdp_mmu.c:212: undefined reference to `__umoddi3' In fact, almost all of tdp_mmu.c can be elided on 32-bit builds, but that is a much larger patch. Fixes: 2f2fad0897cb ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs") Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20201024031150.9318-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 24 October 2020, 08:05:40 UTC |
| aef0388 | Steve French | 28 September 2020, 03:43:22 UTC | cifs: update internal module version number To 2.29 Signed-off-by: Steve French <stfrench@microsoft.com> | 24 October 2020, 04:41:49 UTC |
| 435ccfa | Arjun Roy | 23 October 2020, 18:47:09 UTC | tcp: Prevent low rmem stalls with SO_RCVLOWAT. With SO_RCVLOWAT, under memory pressure, it is possible to enter a state where: 1. We have not received enough bytes to satisfy SO_RCVLOWAT. 2. We have not entered buffer pressure (see tcp_rmem_pressure()). 3. But, we do not have enough buffer space to accept more packets. In this case, we advertise 0 rwnd (due to #3) but the application does not drain the receive queue (no wakeup because of #1 and #2) so the flow stalls. Modify the heuristic for SO_RCVLOWAT so that, if we are advertising rwnd<=rcv_mss, force a wakeup to prevent a stall. Without this patch, setting tcp_rmem to 6143 and disabling TCP autotune causes a stalled flow. With this patch, no stall occurs. This is with RPC-style traffic with large messages. Fixes: 03f45c883c6f ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by: Arjun Roy <arjunroy@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201023184709.217614-1-arjunroy.kdev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 24 October 2020, 02:11:20 UTC |
| dab2342 | Michael Ellerman | 23 October 2020, 03:32:36 UTC | net: ucc_geth: Drop extraneous parentheses in comparison Clang warns about the extra parentheses in this comparison: drivers/net/ethernet/freescale/ucc_geth.c:1361:28: warning: equality comparison with extraneous parentheses if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII)) ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ It seems clear the intent here is to do a comparison not an assignment, so drop the extra parentheses to avoid any confusion. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201023033236.3296988-1-mpe@ellerman.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 24 October 2020, 01:44:06 UTC |
| 0c3b7f4 | Jakub Kicinski | 24 October 2020, 01:37:26 UTC | Merge branch 'ionic-memory-usage-fixes' Shannon Nelson says: ==================== ionic: memory usage fixes This patchset addresses some memory leaks and incorrect io reads. ==================== Link: https://lore.kernel.org/r/20201022235531.65956-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 24 October 2020, 01:37:26 UTC |
| 0c32a28 | Shannon Nelson | 22 October 2020, 23:55:31 UTC | ionic: fix mem leak in rx_empty The sentinel descriptor entry was getting missed in the traverse of the ring from head to tail, so change to a loop of 0 to the end. Fixes: f1d2e894f1b7 ("ionic: use index not pointer for queue tracking") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 24 October 2020, 01:37:23 UTC |
| 43ecf7b | Shannon Nelson | 22 October 2020, 23:55:30 UTC | ionic: no rx flush in deinit Kmemleak pointed out to us that ionic_rx_flush() is sending skbs into napi_gro_XXX with a disabled napi context, and these end up getting lost and leaked. We can safely remove the flush. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 24 October 2020, 01:37:23 UTC |
| d701ec3 | Shannon Nelson | 22 October 2020, 23:55:29 UTC | ionic: clean up sparse complaints The sparse complaints around the static_asserts were obscuring more useful complaints. So, don't check the static_asserts, and fix the remaining sparse complaints. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 24 October 2020, 01:37:23 UTC |
| 4f3391c | Vinay Kumar Yadav | 22 October 2020, 19:05:57 UTC | chelsio/chtls: fix tls record info to user chtls_pt_recvmsg() receives a skb with tls header and subsequent skb with data, need to finalize the data copy whenever next skb with tls header is available. but here current tls header is overwritten by next available tls header, ends up corrupting user buffer data. fixing it by finalizing current record whenever next skb contains tls header. v1->v2: - Improved commit message. Fixes: 17a7d24aa89d ("crypto: chtls - generic handling of data and hdr") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201022190556.21308-1-vinay.yadav@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 24 October 2020, 01:34:10 UTC |
| df83305 | Alex Elder | 22 October 2020, 01:00:29 UTC | net: ipa: command payloads already mapped IPA transactions describe actions to be performed by the IPA hardware. Three cases use IPA transactions: transmitting a socket buffer; providing a page to receive packet data; and issuing an IPA immediate command. An IPA transaction contains a scatter/gather list (SGL) to hold the set of actions to be performed. We map buffers in the SGL for DMA at the time they are added to the transaction. For skb TX transactions, we fill the SGL with a call to skb_to_sgvec(). Page RX transactions involve a single page pointer, and that is recorded in the SGL with sg_set_page(). In both of these cases we then map the SGL for DMA with a call to dma_map_sg(). Immediate commands are different. The payload for an immediate command comes from a region of coherent DMA memory, which must *not* be mapped for DMA. For that reason, gsi_trans_cmd_add() sort of hand-crafts each SGL entry added to a command transaction. This patch fixes a problem with the code that crafts the SGL entry for an immediate command. Previously a portion of the SGL entry was updated using sg_set_buf(). However this is not valid because it includes a call to virt_to_page() on the buffer, but the command buffer pointer is not a linear address. Since we never actually map the SGL for command transactions, there are very few fields in the SGL we need to fill. Specifically, we only need to record the DMA address and the length, so they can be used by __gsi_trans_commit() to fill a TRE. We additionally need to preserve the SGL flags so for_each_sg() still works. For that we can simply assign a null page pointer for command SGL entries. Fixes: 9dd441e4ed575 ("soc: qcom: ipa: GSI transactions") Reported-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201022010029.11877-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 24 October 2020, 01:28:52 UTC |
| f11901e | Linus Torvalds | 24 October 2020, 00:15:06 UTC | Merge tag 'xfs-5.10-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fixes from Darrick Wong: "Two bug fixes that trickled in during the merge window: - Make fallocate check the alignment of its arguments against the fundamental allocation unit of the volume the file lives on, so that we don't trigger the fs' alignment checks. - Cancel unprocessed log intents immediately when log recovery fails, to avoid a log deadlock" * tag 'xfs-5.10-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: cancel intents immediately if process_intents fails xfs: fix fallocate functions when rtextsize is larger than 1 | 24 October 2020, 00:15:06 UTC |
| c80e42a | Linus Torvalds | 24 October 2020, 00:13:53 UTC | Merge tag 'docs-5.10-2' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes" * tag 'docs-5.10-2' of git://git.lwn.net/linux: docs: Add two missing entries in vm sysctl index docs/vm: trivial fixes to several spelling mistakes docs: submitting-patches: describe preserving review/test tags Documentation: Chinese translation of Documentation/arm64/hugetlbpage.rst Documentation: x86: fix a missing word in x86_64/mm.rst. docs: driver-api: remove a duplicated index entry docs: lkdtm: Modernize and improve details docs: deprecated.rst: Expand str*cpy() replacement notes docs/cpu-load: format the example code. | 24 October 2020, 00:13:53 UTC |
| a5e5c27 | Linus Torvalds | 24 October 2020, 00:09:38 UTC | Merge tag 'trace-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing ring-buffer fix from Steven Rostedt: "The success return value of ring_buffer_resize() is stated to be zero and checked that way. But it was incorrectly returning the size allocated. Also, a fix to a comment" * tag 'trace-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Update the description for ring_buffer_wait ring-buffer: Return 0 on success from ring_buffer_resize() | 24 October 2020, 00:09:38 UTC |
| b76f733 | Linus Torvalds | 23 October 2020, 23:38:36 UTC | Merge tag 'acpi-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These include an ACPICA code build fix related to recent GPE register access changes, a Kconfig cleanup related to the Dynamic Platform and Thremal Framework (DPTF) support, a reboot issue workaround, a debug module fix and a couple of janitorial changes. Specifics: - Fix ACPICA code build after recent changes related to accessing GPE registers (Rafael Wysocki). - Clean up DPTF part of the ACPI Kconfig (Rafael Wysocki). - Work around a reboot issue related to RESET_REG (Zhang Rui). - Prevent ACPI debug module from attemtping to run (and crashing) when ACPI is disabled (Jamie Iles). - Drop confusing comment from the ACPI processor driver (Alex Hung). - Drop a few unreachable break statements (Tom Rix)" * tag 'acpi-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: utils: remove unreachable breaks ACPICA: Add missing type casts in GPE register access code ACPI: DPTF: Add ACPI_DPTF Kconfig menu ACPI: DPTF: Fix participant driver names ACPI: processor: remove comment regarding string _UID support ACPI: reboot: Avoid racing after writing to ACPI RESET_REG ACPI: debug: don't allow debugging when ACPI is disabled | 23 October 2020, 23:38:36 UTC |
| 41f762a | Linus Torvalds | 23 October 2020, 23:27:03 UTC | Merge tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "First of all, the adaptive voltage scaling (AVS) drivers go to new platform-specific locations as planned (this part was reported to have merge conflicts against the new arm-soc updates in linux-next). In addition to that, there are some fixes (intel_idle, intel_pstate, RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state accounting support to the generic power domains (genpd) code and some janitorial changes all over. Specifics: - Move the AVS drivers to new platform-specific locations and get rid of the drivers/power/avs directory (Ulf Hansson). - Add on/off notifiers and idle state accounting support to the generic power domains (genpd) framework (Ulf Hansson, Lina Iyer). - Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson). - Make intel_idle disregard ACPI _CST if it cannot use the data returned by that method (Mel Gorman). - Modify intel_pstate to avoid leaving useless sysfs directory structure behind if it cannot be registered (Chen Yu). - Fix domain detection in the RAPL power capping driver and prevent it from failing to enumerate the Psys RAPL domain (Zhang Rui). - Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and later AMD chips (Wei Huang). - Update the driver assumptions comment in intel_idle and fix a kerneldoc comment in the runtime PM framework (Alexander Monakov, Bean Huo). - Avoid unnecessary resets of the cached frequency in the schedutil cpufreq governor to reduce overhead (Wei Wang). - Clean up the cpufreq core a bit (Viresh Kumar). - Make assorted minor janitorial changes (Daniel Lezcano, Geert Uytterhoeven, Hubert Jasudowicz, Tom Rix). - Clean up and optimize the cpupower utility somewhat (Colin Ian King, Martin Kaistra)" * tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) PM: sleep: remove unreachable break PM: AVS: Drop the avs directory and the corresponding Kconfig PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers PM: runtime: Fix typo in pm_runtime_set_active() helper comment PM: domains: Fix build error for genpd notifiers powercap: Fix typo in Kconfig "Plance" -> "Plane" cpufreq: schedutil: restore cached freq when next_f is not changed acpi-cpufreq: Honor _PSD table setting on new AMD CPUs PM: AVS: smartreflex Move driver to soc specific drivers PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers PM: domains: enable domain idle state accounting PM: domains: Add curly braces to delimit comment + statement block PM: domains: Add support for PM domain on/off notifiers for genpd powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain powercap/intel_rapl: Fix domain detection intel_idle: Ignore _CST if control cannot be taken from the platform cpuidle: Remove pointless stub intel_idle: mention assumption that WBINVD is not needed MAINTAINERS: Add section for cpuidle-psci PM domain cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver ... | 23 October 2020, 23:27:03 UTC |
| af99538 | Linus Torvalds | 23 October 2020, 23:19:02 UTC | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "The set of core changes here is Christoph's submission path cleanups. These introduced a couple of regressions when first proposed so they got held over from the initial merge window pull request to give more testing time, which they've now had and Syzbot has confirmed the regression it detected is fixed. The other main changes are two driver updates (arcmsr, pm80xx) and assorted minor clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: qla2xxx: Fix return of uninitialized value in rval scsi: core: Set sc_data_direction to DMA_NONE for no-transfer commands scsi: sr: Initialize ->cmd_len scsi: arcmsr: Update driver version to v1.50.00.02-20200819 scsi: arcmsr: Add support for ARC-1886 series RAID controllers scsi: arcmsr: Fix device hot-plug monitoring timer stop scsi: arcmsr: Remove unnecessary syntax scsi: pm80xx: Driver version update scsi: pm80xx: Increase the number of outstanding I/O supported to 1024 scsi: pm80xx: Remove DMA memory allocation for ccb and device structures scsi: pm80xx: Increase number of supported queues scsi: sym53c8xx_2: Fix sizeof() mismatch scsi: isci: Fix a typo in a comment scsi: qla4xxx: Fix inconsistent format argument type scsi: myrb: Fix inconsistent format argument types scsi: myrb: Remove redundant assignment to variable timeout scsi: bfa: Fix error return in bfad_pci_init() scsi: fcoe: Simplify the return expression of fcoe_sysfs_setup() scsi: snic: Simplify the return expression of svnic_cq_alloc() scsi: fnic: Simplify the return expression of vnic_wq_copy_alloc() ... | 23 October 2020, 23:19:02 UTC |
| bd7e8c9 | Linus Torvalds | 23 October 2020, 23:16:31 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ... | 23 October 2020, 23:16:31 UTC |
| c3a98c3 | Eric Biggers | 23 October 2020, 22:27:48 UTC | crypto: x86/poly1305 - add back a needed assignment One of the assignments that was removed by commit 4a0c1de64bf9 ("crypto: x86/poly1305 - Remove assignments with no effect") is actually needed, since it affects the return value. This fixes the following crypto self-test failure: alg: shash: poly1305-simd test failed (wrong result) on test vector 2, cfg="init+update+final aligned buffer" Fixes: 4a0c1de64bf9 ("crypto: x86/poly1305 - Remove assignments with no effect") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> | 23 October 2020, 22:38:32 UTC |
| 40a03b7 | Linus Torvalds | 23 October 2020, 20:59:05 UTC | Merge tag 'sound-fix-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few additional small and trivial fixes" * tag 'sound-fix-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix the return value if cb func is already registered ALSA: usb-audio: Line6 Pod Go interface requires static clock rate quirk ALSA: hda/ca0132: make some const arrays static, makes object smaller ALSA: sparc: dbri: fix repeated word 'the' | 23 October 2020, 20:59:05 UTC |
| fc03b2d | Linus Torvalds | 23 October 2020, 20:56:34 UTC | Merge tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm Pull more drm fixes from Dave Airlie: "This should be the last round of things for rc1, a bunch of i915 fixes, some amdgpu, more font OOB fixes and one ttm fix just found reading code: fbcon/fonts: - Two patches to prevent OOB access ttm: - fix for evicition value range check amdgpu: - Sienna Cichlid fixes - MST manager resource leak fix - GPU reset fix amdkfd: - Luxmark fix for Navi1x i915: - Tweak initial DPCD backlight.enabled value (Sean) - Initialize reserved MOCS indices (Ayaz) - Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville) - Support parsing of oversize batches (Chris) - Delay execlists processing for TGL (Chris) - Use the active reference on the vma during error capture (Chris) - Widen CSB pointer (Chris) - Wait for CSB entries on TGL (Chris) - Fix unwind for scratch page allocation (Chris) - Exclude low patches of stolen memory (Chris) - Force VT'd workarounds when running as a guest OS (Chris) - Drop runtime-pm assert from vpgu io accessors (Chris)" * tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm: (31 commits) drm/amdgpu: correct the cu and rb info for sienna cichlid drm/amd/pm: remove the average clock value in sysfs drm/amd/pm: fix pp_dpm_fclk Revert drm/amdgpu: disable sienna chichlid UMC RAS drm/amd/pm: fix pcie information for sienna cichlid drm/amdkfd: Use same SQ prefetch setting as amdgpu drm/amd/swsmu: correct wrong feature bit mapping drm/amd/psp: Fix sysfs: cannot create duplicate filename drm/amd/display: Avoid MST manager resource leak. drm/amd/display: Revert "drm/amd/display: Fix a list corruption" drm/amdgpu: update golden setting for sienna_cichlid drm/amd/swsmu: add missing feature map for sienna_cichlid drm/amdgpu: correct the gpu reset handling for job != NULL case drm/amdgpu: add rlc iram and dram firmware support drm/amdgpu: add function to program pbb mode for sienna cichlid drm/i915: Drop runtime-pm assert from vgpu io accessors drm/i915: Force VT'd workarounds when running as a guest OS drm/i915: Exclude low pages (128KiB) of stolen from use drm/i915/gt: Onion unwind for scratch page allocation failure drm/ttm: fix eviction valuable range check. ... | 23 October 2020, 20:56:34 UTC |
| 9c5743d | Rasmus Villemoes | 23 October 2020, 20:31:54 UTC | x86/uaccess: fix code generation in put_user() Quoting https://gcc.gnu.org/onlinedocs/gcc/Local-Register-Variables.html: You can define a local register variable and associate it with a specified register... The only supported use for this feature is to specify registers for input and output operands when calling Extended asm (see Extended Asm). This may be necessary if the constraints for a particular machine don't provide sufficient control to select the desired register. On 32-bit x86, this is used to ensure that gcc will put an 8-byte value into the %edx:%eax pair, while all other cases will just use the single register %eax (%rax on x86-64). While the _ASM_AX actually just expands to "%eax", note this comment next to get_user() which does something very similar: * The use of _ASM_DX as the register specifier is a bit of a * simplification, as gcc only cares about it as the starting point * and not size: for a 64-bit value it will use %ecx:%edx on 32 bits * (%ecx being the next register in gcc's x86 register sequence), and * %rdx on 64 bits. However, getting this to work requires that there is no code between the assignment to the local register variable and its use as an input to the asm() which can possibly clobber any of the registers involved - including evaluation of the expressions making up other inputs. In the current code, the ptr expression used directly as an input may cause such code to be emitted. For example, Sean Christopherson observed that with KASAN enabled and ptr being current->set_child_tid (from chedule_tail()), the load of current->set_child_tid causes a call to __asan_load8() to be emitted immediately prior to the __put_user_4 call, and Naresh Kamboju reports that various mmstress tests fail on KASAN-enabled builds. It's also possible to synthesize a broken case without KASAN if one uses "foo()" as the ptr argument, with foo being some "extern u64 __user *foo(void);" (though I don't know if that appears in real code). Fix it by making sure ptr gets evaluated before the assignment to __val_pu, and add a comment that __val_pu must be the last thing computed before the asm() is entered. Cc: Sean Christopherson <sean.j.christopherson@intel.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: d55564cfc222 ("x86: Make __put_user() generate an out-of-line call") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 23 October 2020, 20:44:24 UTC |
| 7d03ae4 | Steve French | 23 October 2020, 20:21:38 UTC | smb3: add some missing definitions from MS-FSCC Add some structures and defines that were recently added to the protocol documentation (see MS-FSCC sections 2.3.29-2.3.34). Signed-off-by: Steve French <stfrench@microsoft.com> | 23 October 2020, 20:38:10 UTC |
| 6a87266 | Steve French | 23 October 2020, 13:23:45 UTC | smb3: remove two unused variables Fix two unused variables in commit "add support for stat of WSL reparse points for special file types" Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Steve French <stfrench@microsoft.com> | 23 October 2020, 20:38:10 UTC |
| 2e4564b | Steve French | 23 October 2020, 03:03:14 UTC | smb3: add support for stat of WSL reparse points for special file types This is needed so when mounting to Windows we do not misinterpret various special files created by Linux (WSL) as symlinks. An earlier patch addressed readdir. This patch fixes stat (getattr). With this patch: File: /mnt1/char Size: 0 Blocks: 0 IO Block: 16384 character special file Device: 34h/52d Inode: 844424930132069 Links: 1 Device type: 0,0 Access: (0755/crwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2020-10-21 17:46:51.839458900 -0500 Modify: 2020-10-21 17:46:51.839458900 -0500 Change: 2020-10-21 18:30:39.797358800 -0500 Birth: - File: /mnt1/fifo Size: 0 Blocks: 0 IO Block: 16384 fifo Device: 34h/52d Inode: 1125899906842722 Links: 1 Access: (0755/prwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2020-10-21 16:21:37.259249700 -0500 Modify: 2020-10-21 16:21:37.259249700 -0500 Change: 2020-10-21 18:30:39.797358800 -0500 Birth: - File: /mnt1/block Size: 0 Blocks: 0 IO Block: 16384 block special file Device: 34h/52d Inode: 844424930132068 Links: 1 Device type: 0,0 Access: (0755/brwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2020-10-21 17:10:47.913103200 -0500 Modify: 2020-10-21 17:10:47.913103200 -0500 Change: 2020-10-21 18:30:39.796725500 -0500 Birth: - without the patch all show up incorrectly as symlinks with annoying "operation not supported error also returned" File: /mnt1/charstat: cannot read symbolic link '/mnt1/char': Operation not supported Size: 0 Blocks: 0 IO Block: 16384 symbolic link Device: 34h/52d Inode: 844424930132069 Links: 1 Access: (0000/l---------) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2020-10-21 17:46:51.839458900 -0500 Modify: 2020-10-21 17:46:51.839458900 -0500 Change: 2020-10-21 18:30:39.797358800 -0500 Birth: - File: /mnt1/fifostat: cannot read symbolic link '/mnt1/fifo': Operation not supported Size: 0 Blocks: 0 IO Block: 16384 symbolic link Device: 34h/52d Inode: 1125899906842722 Links: 1 Access: (0000/l---------) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2020-10-21 16:21:37.259249700 -0500 Modify: 2020-10-21 16:21:37.259249700 -0500 Change: 2020-10-21 18:30:39.797358800 -0500 Birth: - File: /mnt1/blockstat: cannot read symbolic link '/mnt1/block': Operation not supported Size: 0 Blocks: 0 IO Block: 16384 symbolic link Device: 34h/52d Inode: 844424930132068 Links: 1 Access: (0000/l---------) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2020-10-21 17:10:47.913103200 -0500 Modify: 2020-10-21 17:10:47.913103200 -0500 Change: 2020-10-21 18:30:39.796725500 -0500 Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> | 23 October 2020, 20:38:10 UTC |
| 3cb12d2 | Linus Torvalds | 23 October 2020, 19:05:49 UTC | Merge tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Cross-tree/merge window issues: - rtl8150: don't incorrectly assign random MAC addresses; fix late in the 5.9 cycle started depending on a return code from a function which changed with the 5.10 PR from the usb subsystem Current release regressions: - Revert "virtio-net: ethtool configurable RXCSUM", it was causing crashes at probe when control vq was not negotiated/available Previous release regressions: - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO bus, only first device would be probed correctly - nexthop: Fix performance regression in nexthop deletion by effectively switching from recently added synchronize_rcu() to synchronize_rcu_expedited() - netsec: ignore 'phy-mode' device property on ACPI systems; the property is not populated correctly by the firmware, but firmware configures the PHY so just keep boot settings Previous releases - always broken: - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing bulk transfers getting "stuck" - icmp: randomize the global rate limiter to prevent attackers from getting useful signal - r8169: fix operation under forced interrupt threading, make the driver always use hard irqs, even on RT, given the handler is light and only wants to schedule napi (and do so through a _irqoff() variant, preferably) - bpf: Enforce pointer id generation for all may-be-null register type to avoid pointers erroneously getting marked as null-checked - tipc: re-configure queue limit for broadcast link - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels - fix various issues in chelsio inline tls driver Misc: - bpf: improve just-added bpf_redirect_neigh() helper api to support supplying nexthop by the caller - in case BPF program has already done a lookup we can avoid doing another one - remove unnecessary break statements - make MCTCP not select IPV6, but rather depend on it" * tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) tcp: fix to update snd_wl1 in bulk receiver fast path net: Properly typecast int values to set sk_max_pacing_rate netfilter: nf_fwd_netdev: clear timestamp in forwarding path ibmvnic: save changed mac address to adapter->mac_addr selftests: mptcp: depends on built-in IPv6 Revert "virtio-net: ethtool configurable RXCSUM" rtnetlink: fix data overflow in rtnl_calcit() net: ethernet: mtk-star-emac: select REGMAP_MMIO net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh() bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop mptcp: depends on IPV6 but not as a module sfc: move initialisation of efx->filter_sem to efx_init_struct() mpls: load mpls_gso after mpls_iptunnel net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action() net: dsa: bcm_sf2: make const array static, makes object smaller mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it ... | 23 October 2020, 19:05:49 UTC |
| 0adc313 | Linus Torvalds | 23 October 2020, 18:47:42 UTC | Merge tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 updates from Andreas Gruenbacher: - Use iomap for non-journaled buffered I/O. This largely eliminates buffer heads on filesystems where the block size matches the page size. Many thanks to Christoph Hellwig for this patch! - Fixes for some more journaled data filesystem bugs, found by running xfstests with data journaling on for all files (chattr +j $MNT) (Bob Peterson) - gfs2_evict_inode refactoring (Bob Peterson) - Use the statfs data in the journal during recovery instead of reading it in from the local statfs inodes (Abhi Das) - Several other minor fixes by various people * tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (30 commits) gfs2: Recover statfs info in journal head gfs2: lookup local statfs inodes prior to journal recovery gfs2: Add fields for statfs info in struct gfs2_log_header_host gfs2: Ignore subsequent errors after withdraw in rgrp_go_sync gfs2: Eliminate gl_vm gfs2: Only access gl_delete for iopen glocks gfs2: Fix comments to glock_hash_walk gfs2: eliminate GLF_QUEUED flag in favor of list_empty(gl_holders) gfs2: Ignore journal log writes for jdata holes gfs2: simplify gfs2_block_map gfs2: Only set PageChecked if we have a transaction gfs2: don't lock sd_ail_lock in gfs2_releasepage gfs2: make gfs2_ail1_empty_one return the count of active items gfs2: Wipe jdata and ail1 in gfs2_journal_wipe, formerly gfs2_meta_wipe gfs2: enhance log_blocks trace point to show log blocks free gfs2: add missing log_blocks trace points in gfs2_write_revokes gfs2: rename gfs2_write_full_page to gfs2_write_jdata_page, remove parm gfs2: add validation checks for size of superblock gfs2: use-after-free in sysfs deregistration gfs2: Fix NULL pointer dereference in gfs2_rgrp_dump ... | 23 October 2020, 18:47:42 UTC |
| 0613ed9 | Linus Torvalds | 23 October 2020, 18:41:39 UTC | Merge tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs updates from Steve French: - add support for recognizing special file types (char/block/fifo/ symlink) for files created by Linux on WSL (a format we plan to move to as the default for creating special files on Linux, as it has advantages over the other current option, the SFU format) in readdir. - fix double queries to root directory when directory leases not supported (e.g. Samba) - fix querying mode bits (modefromsid mount option) for special file types - stronger encryption (gcm256), disabled by default until tested more broadly - allow querying owner when server reports 'well known SID' on query dir with SMB3.1.1 POSIX extensions * tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (30 commits) SMB3: add support for recognizing WSL reparse tags cifs: remove bogus debug code smb3.1.1: fix typo in compression flag cifs: move smb version mount options into fs_context.c cifs: move cache mount options to fs_context.ch cifs: move security mount options into fs_context.ch cifs: add files to host new mount api smb3: do not try to cache root directory if dir leases not supported smb3: fix stat when special device file and mounted with modefromsid cifs: Print the address and port we are connecting to in generic_ip_connect() SMB3: Resolve data corruption of TCP server info fields cifs: make const array static, makes object smaller SMB3.1.1: Fix ids returned in POSIX query dir smb3: add dynamic trace point to trace when credits obtained smb3.1.1: do not fail if no encryption required but server doesn't support it cifs: Return the error from crypt_message when enc/dec key not found. smb3.1.1: set gcm256 when requested smb3.1.1: rename nonces used for GCM and CCM encryption smb3.1.1: print warning if server does not support requested encryption type smb3.1.1: add new module load parm enable_gcm_256 ... | 23 October 2020, 18:41:39 UTC |
| c4728cf | Linus Torvalds | 23 October 2020, 18:33:41 UTC | Merge tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull clone/dedupe/remap code refactoring from Darrick Wong: "Move the generic file range remap (aka reflink and dedupe) functions out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to reduce clutter in the first two files" * tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: move the generic write and copy checks out of mm vfs: move the remap range helpers to remap_range.c vfs: move generic_remap_checks out of mm | 23 October 2020, 18:33:41 UTC |
| 2e34ae0 | Helge Deller | 23 October 2020, 18:23:47 UTC | ata: pata_ns87415.c: Document support on parisc with superio chip I tested this driver on my HP PA-RISC C3000 workstation and it does work with the built-in TEAC CD-532E-B CD-ROM drive. So drop the TODO item and adjust the file header. Signed-off-by: Helge Deller <deller@gmx.de> | 23 October 2020, 18:23:47 UTC |
| 94bd571 | Mauro Carvalho Chehab | 23 October 2020, 16:32:55 UTC | ata: fix some kernel-doc markups Some functions have different names between their prototypes and the kernel-doc markup. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 23 October 2020, 18:20:32 UTC |
| 24f7bb8 | Mauro Carvalho Chehab | 23 October 2020, 16:32:54 UTC | block: blk-mq: fix a kernel-doc markup Fix a typo: blk_mq_run_hw_queue -> blk_mq_run_hw_queues Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 23 October 2020, 18:20:17 UTC |
| f9a705a | Linus Torvalds | 23 October 2020, 18:17:56 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ... | 23 October 2020, 18:17:56 UTC |
| 44a4c9e | Helge Deller | 22 October 2020, 16:40:07 UTC | parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage The commit 75ae04206a4d ("parisc: Define O_NONBLOCK to become 000200000") changed the O_NONBLOCK constant to have only one bit set (like all other architectures). This change broke some existing userspace code (e.g. udevadm, systemd-udevd, elogind) which called specific syscalls which do strict value checking on their flag parameter. This patch adds wrapper functions for the relevant syscalls. The wrappers masks out any old invalid O_NONBLOCK flags, reports in the syslog if the old O_NONBLOCK value was used and then calls the target syscall with the new O_NONBLOCK value. Fixes: 75ae04206a4d ("parisc: Define O_NONBLOCK to become 000200000") Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Meelis Roos <mroos@linux.ee> Tested-by: Jeroen Roovers <jer@xs4all.nl> | 23 October 2020, 18:14:07 UTC |
| 9313f80 | Linus Torvalds | 23 October 2020, 18:00:57 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: "vhost, vdpa, and virtio cleanups and fixes A very quiet cycle, no new features" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: MAINTAINERS: add URL for virtio-mem vhost_vdpa: remove unnecessary spin_lock in vhost_vring_call vringh: fix __vringh_iov() when riov and wiov are different vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK s390: virtio: PV needs VIRTIO I/O device protection virtio: let arch advertise guest's memory access restrictions vhost_vdpa: Fix duplicate included kernel.h vhost: reduce stack usage in log_used virtio-mem: Constify mem_id_table virtio_input: Constify id_table virtio-balloon: Constify id_table vdpa/mlx5: Fix failure to bring link up vdpa/mlx5: Make use of a specific 16 bit endianness API | 23 October 2020, 18:00:57 UTC |
| 090a7d0 | Linus Torvalds | 23 October 2020, 17:54:13 UTC | Merge tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code | 23 October 2020, 17:54:13 UTC |
