| 1a60864 | Linus Torvalds | 15 January 2014, 08:07:36 UTC | Merge tag 'md/3.13-fixes' of git://neil.brown.name/md Pull late md fixes from Neil Brown: "Half a dozen md bug fixes. All of these fix real bugs the people have hit, and are tagged for -stable. Sorry they are late .... Christmas holidays and all that. Hopefully they can still squeak into 3.13" * tag 'md/3.13-fixes' of git://neil.brown.name/md: md: fix problem when adding device to read-only array with bitmap. md/raid10: fix bug when raid10 recovery fails to recover a block. md/raid5: fix a recently broken BUG_ON(). md/raid1: fix request counting bug in new 'barrier' code. md/raid10: fix two bugs in handling of known-bad-blocks. md/raid5: Fix possible confusion when multiple write errors occur. | 15 January 2014, 08:07:36 UTC |
| 145830d | Linus Torvalds | 15 January 2014, 08:06:14 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "One nouveau regression fix on older cards, i915 black screen fixes, and a revert for a strange G33 intel problem" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: fix null ptr dereferences on some boards Revert "drm: copy mode type in drm_mode_connector_list_update()" drm/i915/bdw: make sure south port interrupts are enabled properly v2 drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init() drm/i915: fix DDI PLLs HW state readout code | 15 January 2014, 08:06:14 UTC |
| 703a8c2 | Dave Airlie | 15 January 2014, 05:01:11 UTC | Merge branch 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Single regression fix for nouveau * 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix null ptr dereferences on some boards | 15 January 2014, 05:01:11 UTC |
| fdd239a | Ben Skeggs | 14 January 2014, 04:56:22 UTC | drm/nouveau: fix null ptr dereferences on some boards Regression from "device: populate master subdev pointer only when fully constructed" Reported-by: Bob Gleitsmann <rjgleits@bellsouth.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 15 January 2014, 04:24:05 UTC |
| 8313b8e | NeilBrown | 11 December 2013, 23:13:33 UTC | md: fix problem when adding device to read-only array with bitmap. If an array is started degraded, and then the missing device is found it can be re-added and a minimal bitmap-based recovery will bring it fully up-to-date. If the array is read-only a recovery would not be allowed. But also if the array is read-only and the missing device was present very recently, then there could be no need for any recovery at all, so we simply include the device in the read-only array without any recovery. However... if the missing device was removed a little longer ago it could be missing some updates, but if a bitmap is present it will be conditionally accepted pending a bitmap-based update. We don't currently detect this case properly and will include that old device into the read-only array with no recovery even though it really needs a recovery. This patch keeps track of whether a bitmap-based-recovery is really needed or not in the new Bitmap_sync rdev flag. If that is set, then the device will not be added to a read-only array. Cc: Andrei Warkentin <andreiw@vmware.com> Fixes: d70ed2e4fafdbef0800e73942482bb075c21578b Cc: stable@vger.kernel.org (3.2+) Signed-off-by: NeilBrown <neilb@suse.de> | 14 January 2014, 05:44:08 UTC |
| e8b8491 | NeilBrown | 05 January 2014, 23:35:34 UTC | md/raid10: fix bug when raid10 recovery fails to recover a block. commit e875ecea266a543e643b19e44cf472f1412708f9 md/raid10 record bad blocks as needed during recovery. added code to the "cannot recover this block" path to record a bad block rather than fail the whole recovery. Unfortunately this new case was placed *after* r10bio was freed rather than *before*, yet it still uses r10bio. This is will crash with a null dereference. So move the freeing of r10bio down where it is safe. Cc: stable@vger.kernel.org (v3.1+) Fixes: e875ecea266a543e643b19e44cf472f1412708f9 Reported-by: Damian Nowak <spam@nowaker.net> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181 Signed-off-by: NeilBrown <neilb@suse.de> | 14 January 2014, 05:44:08 UTC |
| 5af9bef | NeilBrown | 14 January 2014, 04:16:10 UTC | md/raid5: fix a recently broken BUG_ON(). commit 6d183de4077191d1201283a9035ce57a9b05254d md/raid5: fix newly-broken locking in get_active_stripe. simplified a BUG_ON, but removed too much so now it sometimes fires when it shouldn't. When the STRIPE_EXPANDING flag is set, the stripe_head might be on a special list while multiple stripe_heads are collected, or it might not be on any list, even a 'free' list when the refcount is zero. As long as STRIPE_EXPANDING is set, it will be found and added back to a list eventually. So both of the BUG_ONs which test for the ->lru being empty or not need to avoid the case where STRIPE_EXPANDING is set. The patch which broke this was marked for -stable, so this patch needs to be applied to any branch that received 6d183de4 Fixes: 6d183de4077191d1201283a9035ce57a9b05254d Cc: stable@vger.kernel.org (any release to which above was applied) Signed-off-by: NeilBrown <neilb@suse.de> | 14 January 2014, 05:44:07 UTC |
| 41a336e | NeilBrown | 14 January 2014, 00:56:14 UTC | md/raid1: fix request counting bug in new 'barrier' code. The new iobarrier implementation in raid1 (which keeps normal writes and resync activity separate) counts every request what is not before the current resync point in either next_window_requests or current_window_requests. It flags that the request is counted by setting ->start_next_window. allow_barrier follows this model exactly and decrements one of the *_window_requests if and only if ->start_next_window is set. However wait_barrier(), which increments *_window_requests uses a slightly different test for setting -.start_next_window (which is set from the return value of this function). So there is a possibility of the counts getting out of sync, and this leads to the resync hanging. So change wait_barrier() to return a non-zero value in exactly the same cases that it increments *_window_requests. But was introduced in 3.13-rc1. Reported-by: Bruno Wolff III <bruno@wolff.to> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68061 Fixes: 79ef3a8aa1cb1523cc231c9a90a278333c21f761 Cc: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> | 14 January 2014, 05:44:07 UTC |
| b50c259 | NeilBrown | 13 January 2014, 23:38:09 UTC | md/raid10: fix two bugs in handling of known-bad-blocks. If we discover a bad block when reading we split the request and potentially read some of it from a different device. The code path of this has two bugs in RAID10. 1/ we get a spin_lock with _irq, but unlock without _irq!! 2/ The calculation of 'sectors_handled' is wrong, as can be clearly seen by comparison with raid1.c This leads to at least 2 warnings and a probable crash is a RAID10 ever had known bad blocks. Cc: stable@vger.kernel.org (v3.1+) Fixes: 856e08e23762dfb92ffc68fd0a8d228f9e152160 Reported-by: Damian Nowak <spam@nowaker.net> URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181 Signed-off-by: NeilBrown <neilb@suse.de> | 14 January 2014, 05:44:07 UTC |
| 1cc03eb | NeilBrown | 06 January 2014, 02:19:42 UTC | md/raid5: Fix possible confusion when multiple write errors occur. commit 5d8c71f9e5fbdd95650be00294d238e27a363b5c md: raid5 crash during degradation Fixed a crash in an overly simplistic way which could leave R5_WriteError or R5_MadeGood set in the stripe cache for devices for which it is no longer relevant. When those devices are removed and spares added the flags are still set and can cause incorrect behaviour. commit 14a75d3e07c784c004b4b44b34af996b8e4ac453 md/raid5: preferentially read from replacement device if possible. Fixed the same bug if a more effective way, so we can now revert the original commit. Reported-and-tested-by: Alexander Lyakas <alex.bolshoy@gmail.com> Cc: stable@vger.kernel.org (3.2+ - 3.2 will need a different fix though) Fixes: 5d8c71f9e5fbdd95650be00294d238e27a363b5c Signed-off-by: NeilBrown <neilb@suse.de> | 14 January 2014, 05:44:07 UTC |
| abce1ec | Dave Airlie | 14 January 2014, 02:50:49 UTC | Revert "drm: copy mode type in drm_mode_connector_list_update()" This reverts commit 3fbd6439e4639ecaeaae6c079e0aa497a1ac3482. This caused some strange booting lockup issues on an Intel G33 belonging to Daniel Vetter, very unusual, I was hoping Daniel would track this down, but it looks like instead I'll have to hack a different fix for -next. Signed-off-by: Dave Airlie <airlied@redhat.com> | 14 January 2014, 02:50:49 UTC |
| c0eeb85 | Dave Airlie | 14 January 2014, 02:44:48 UTC | Merge tag 'drm-intel-fixes-2014-01-13' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Black screen fixes, one for hsw+bdw each and a regression fix for locking+load detection. * tag 'drm-intel-fixes-2014-01-13' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915/bdw: make sure south port interrupts are enabled properly v2 drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init() drm/i915: fix DDI PLLs HW state readout code | 14 January 2014, 02:44:48 UTC |
| a6da83f | Linus Torvalds | 13 January 2014, 03:59:05 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fix from Ben Herrenschmidt: "Here's one regression fix for 3.13 that I would appreciate if you could still pull in. It was an "interesting" one to debug, basically it's an old bug that got somewhat "exposed" by new code breaking the boot on PA Semi boards (yes, it does appear that some people are still using these!)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Check return value of instance-to-package OF call | 13 January 2014, 03:59:05 UTC |
| 061f49e | Linus Torvalds | 13 January 2014, 00:28:49 UTC | Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Sorry, meant to push out this batch earlier this weekend" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, fpu, amd: Clear exceptions in AMD FXSAVE workaround ftrace/x86: Load ftrace_ops in parameter not the variable holding it | 13 January 2014, 00:28:49 UTC |
| 10348f5 | Benjamin Herrenschmidt | 12 January 2014, 22:49:17 UTC | powerpc: Check return value of instance-to-package OF call On PA-Semi firmware, the instance-to-package callback doesn't seem to be implemented. We didn't check for error, however, thus subsequently passed the -1 value returned into stdout_node to thins like prom_getprop etc... Thus caused the firmware to load values around 0 (physical) internally as node structures. It somewhat "worked" as long as we had a NULL in the right place (address 8) at the beginning of the kernel, we didn't "see" the bug. But commit 5c0484e25ec03243d4c2f2d4416d4a13efc77f6a "powerpc: Endian safe trampoline" changed the kernel entry point causing that old bug to now cause a crash early during boot. This fixes booting on PA-Semi board by properly checking the return value from instance-to-package. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Olof Johansson <olof@lixom.net> --- | 12 January 2014, 22:49:17 UTC |
| 7e22e91 | Linus Torvalds | 12 January 2014, 10:04:18 UTC | Linux 3.13-rc8 | 12 January 2014, 10:04:18 UTC |
| 3dc91d4 | Steven Rostedt | 10 January 2014, 02:46:34 UTC | SELinux: Fix possible NULL pointer dereference in selinux_inode_permission() While running stress tests on adding and deleting ftrace instances I hit this bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_inode_permission+0x85/0x160 PGD 63681067 PUD 7ddbe067 PMD 0 Oops: 0000 [#1] PREEMPT CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000 RIP: 0010:[<ffffffff812d8bc5>] [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160 RSP: 0018:ffff88007ddb1c48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840 RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000 RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54 R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000 R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000 FS: 00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0 Call Trace: security_inode_permission+0x1c/0x30 __inode_permission+0x41/0xa0 inode_permission+0x18/0x50 link_path_walk+0x66/0x920 path_openat+0xa6/0x6c0 do_filp_open+0x43/0xa0 do_sys_open+0x146/0x240 SyS_open+0x1e/0x20 system_call_fastpath+0x16/0x1b Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff RIP selinux_inode_permission+0x85/0x160 CR2: 0000000000000020 Investigating, I found that the inode->i_security was NULL, and the dereference of it caused the oops. in selinux_inode_permission(): isec = inode->i_security; rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd); Note, the crash came from stressing the deletion and reading of debugfs files. I was not able to recreate this via normal files. But I'm not sure they are safe. It may just be that the race window is much harder to hit. What seems to have happened (and what I have traced), is the file is being opened at the same time the file or directory is being deleted. As the dentry and inode locks are not held during the path walk, nor is the inodes ref counts being incremented, there is nothing saving these structures from being discarded except for an rcu_read_lock(). The rcu_read_lock() protects against freeing of the inode, but it does not protect freeing of the inode_security_struct. Now if the freeing of the i_security happens with a call_rcu(), and the i_security field of the inode is not changed (it gets freed as the inode gets freed) then there will be no issue here. (Linus Torvalds suggested not setting the field to NULL such that we do not need to check if it is NULL in the permission check). Note, this is a hack, but it fixes the problem at hand. A real fix is to restructure the destroy_inode() to call all the destructor handlers from the RCU callback. But that is a major job to do, and requires a lot of work. For now, we just band-aid this bug with this fix (it works), and work on a more maintainable solution in the future. Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home Cc: stable@vger.kernel.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 January 2014, 09:53:13 UTC |
| eecc1e4 | Hugh Dickins | 12 January 2014, 09:25:21 UTC | thp: fix copy_page_rep GPF by testing is_huge_zero_pmd once only We see General Protection Fault on RSI in copy_page_rep: that RSI is what you get from a NULL struct page pointer. RIP: 0010:[<ffffffff81154955>] [<ffffffff81154955>] copy_page_rep+0x5/0x10 RSP: 0000:ffff880136e15c00 EFLAGS: 00010286 RAX: ffff880000000000 RBX: ffff880136e14000 RCX: 0000000000000200 RDX: 6db6db6db6db6db7 RSI: db73880000000000 RDI: ffff880dd0c00000 RBP: ffff880136e15c18 R08: 0000000000000200 R09: 000000000005987c R10: 000000000005987c R11: 0000000000000200 R12: 0000000000000001 R13: ffffea00305aa000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f195752f700(0000) GS:ffff880c7fc20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000093010000 CR3: 00000001458e1000 CR4: 00000000000027e0 Call Trace: copy_user_huge_page+0x93/0xab do_huge_pmd_wp_page+0x710/0x815 handle_mm_fault+0x15d8/0x1d70 __do_page_fault+0x14d/0x840 do_page_fault+0x2f/0x90 page_fault+0x22/0x30 do_huge_pmd_wp_page() tests is_huge_zero_pmd(orig_pmd) four times: but since shrink_huge_zero_page() can free the huge_zero_page, and we have no hold of our own on it here (except where the fourth test holds page_table_lock and has checked pmd_same), it's possible for it to answer yes the first time, but no to the second or third test. Change all those last three to tests for NULL page. (Note: this is not the same issue as trinity's DEBUG_PAGEALLOC BUG in copy_page_rep with RSI: ffff88009c422000, reported by Sasha Levin in https://lkml.org/lkml/2013/3/29/103. I believe that one is due to the source page being split, and a tail page freed, while copy is in progress; and not a problem without DEBUG_PAGEALLOC, since the pmd_same check will prevent a miscopy from being made visible.) Fixes: 97ae17497e99 ("thp: implement refcounting for huge zero page") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # v3.10 v3.11 v3.12 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 January 2014, 09:47:15 UTC |
| 518d00b | Ming Lei | 26 December 2013, 13:31:37 UTC | block: null_blk: fix queue leak inside removing device When queue_mode is NULL_Q_MQ and null_blk is being removed, blk_cleanup_queue() isn't called to cleanup queue, so the queue allocated won't be freed. This patch calls blk_cleanup_queue() for MQ to drain all pending requests first and release the reference counter of queue kobject, then blk_mq_free_queue() will be called in queue kobject's release handler when queue kobject's reference counter drops to zero. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 January 2014, 09:22:42 UTC |
| 26bef13 | Linus Torvalds | 12 January 2014, 03:15:52 UTC | x86, fpu, amd: Clear exceptions in AMD FXSAVE workaround Before we do an EMMS in the AMD FXSAVE information leak workaround we need to clear any pending exceptions, otherwise we trap with a floating-point exception inside this code. Reported-by: halfdog <me@halfdog.net> Tested-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/CA%2B55aFxQnY_PCG_n4=0w-VG=YLXL-yr7oMxyy0WU2gCBAf3ydg@mail.gmail.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> | 12 January 2014, 03:15:52 UTC |
| 228fdc0 | Linus Torvalds | 10 January 2014, 23:37:11 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "Famouse last words: "final pull request" :-) I'm sending this because Jason Wang's fixes are pretty important 1) Add missing per-cpu stats initialization to ip6_vti. Otherwise lockdep spits out a call trace. From Li RongQing. 2) Fix NULL oops in wireless hwsim, from Javier Lopez 3) TIPC deferred packet queue unlink must NULL out skb->next to avoid crashes. From Erik Hugne 4) Fix access to uninitialized buffer in nf_nat netfilter code, from Daniel Borkmann 5) Fix lifetime of ipv6 loopback and SIT tunnel addresses, otherwise they basically timeout immediately. From Hannes Frederic Sowa 6) Fix DMA unmapping of TSO packets in bnx2x driver, from Michal Schmidt 7) Do not allow L2 forwarding offload via macvtap device, the way things are now it will not end up being forwaded at all. From Jason Wang 8) Fix transmit queue selection via ndo_dfwd_start_xmit(), fixing things like applying NETIF_F_LLTX to the wrong device (!!) and eliding the proper transmit watchdog handling 9) qlcnic driver was not updating tx statistics at all, from Manish Chopra" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: qlcnic: Fix ethtool statistics length calculation qlcnic: Fix bug in TX statistics net: core: explicitly select a txq before doing l2 forwarding macvlan: forbid L2 fowarding offload for macvtap bnx2x: fix DMA unmapping of TSO split BDs ipv6: add link-local, sit and loopback address with INFINITY_LIFE_TIME bnx2x: prevent WARN during driver unload tipc: correctly unlink packets from deferred packet queue ipv6: pcpu_tstats.syncp should be initialised in ip6_vti.c netfilter: only warn once on wrong seqadj usage netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper NFC: Fix target mode p2p link establishment iwlwifi: add new devices for 7265 series mac80211: move "bufferable MMPDU" check to fix AP mode scan mac80211_hwsim: Fix NULL pointer dereference | 10 January 2014, 23:37:11 UTC |
| e2bc447 | Linus Torvalds | 10 January 2014, 23:33:03 UTC | Merge tag 'xfs-for-linus-v3.13-rc8' of git://oss.sgi.com/xfs/xfs Pull xfs bugfixes from Ben Myers: "Here we have a bugfix for an off-by-one in the remote attribute verifier that results in a forced shutdown which you can hit with v5 superblock by creating a 64k xattr, and a fix for a missing destroy_work_on_stack() in the allocation worker. It's a bit late, but they are both fairly straightforward" * tag 'xfs-for-linus-v3.13-rc8' of git://oss.sgi.com/xfs/xfs: xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK() xfs: fix off-by-one error in xfs_attr3_rmt_verify | 10 January 2014, 23:33:03 UTC |
| 324c66f | Linus Torvalds | 10 January 2014, 23:26:27 UTC | Merge branch 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED fix from Bryan Wu: "Pali Rohár and Pavel Machek reported the LED of Nokia N900 doesn't work with our latest 3.13-rc6 kernel. Milo fixed the regression here" * 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: lp5521/5523: Remove duplicate mutex | 10 January 2014, 23:26:27 UTC |
| cff539b | Linus Torvalds | 10 January 2014, 23:25:02 UTC | Merge tag 'pm+acpi-3.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Recent commits modifying the lists of C-states in the intel_idle driver introduced bugs leading to crashes on some systems. Two fixes from Jiang Liu. - The ACPI AC driver should receive all types of notifications, but recent change made it ignore some of them. Fix from Alexander Mezin. - intel_pstate's validity checks for MSRs it depends on are not sufficient to catch the lack of support in nested KVM setups, so they are extended to cover that case. From Dirk Brandewie. - NEC LZ750/LS has a botched up _BIX method in its ACPI tables, so our ACPI battery driver needs a quirk for it. From Lan Tianyu. - The tpm_ppi driver sometimes leaks memory allocated by acpi_get_name(). Fix from Jiang Liu. * tag 'pm+acpi-3.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: close avn_cstates array with correct marker Revert "intel_idle: mark states tables with __initdata tag" ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters. ACPI / TPM: fix memory leak when walking ACPI namespace ACPI / AC: change notification handler type to ACPI_ALL_NOTIFY | 10 January 2014, 23:25:02 UTC |
| c43a5eb | Linus Torvalds | 10 January 2014, 23:23:57 UTC | Merge tag 'mfd-fixes-3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes Pull MFD fix from Samuel Ortiz: "This is the 2nd MFD pull request for 3.13 It only contains one fix for the rtsx_pcr driver. Without it we see a kernel panic on some machines, when resuming from suspend to RAM" * tag 'mfd-fixes-3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: rtsx_pcr: Disable interrupts before cancelling delayed works | 10 January 2014, 23:23:57 UTC |
| e70988d | Milo Kim | 03 December 2013, 01:21:44 UTC | leds: lp5521/5523: Remove duplicate mutex It can be a problem when a pattern is loaded via the firmware interface. LP55xx common driver has already locked the mutex in 'lp55xx_firmware_loaded()'. So it should be deleted. On the other hand, locks are required in store_engine_load() on updating program memory. Reported-by: Pali Rohár <pali.rohar@gmail.com> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com> Cc: <stable@vger.kernel.org> | 10 January 2014, 22:48:07 UTC |
| 09f2344 | Jesse Barnes | 10 January 2014, 21:13:09 UTC | drm/i915/bdw: make sure south port interrupts are enabled properly v2 We were apparently relying on the defaults on BDW, which resulted in no hotplug or AUX interrupts. So be sure to call the ibx_irq_preinstall to enable all interrupts. v2: use preinstall instead of redundant SDIER write References: https://bugs.freedesktop.org/show_bug.cgi?id=72834 References: https://bugs.freedesktop.org/show_bug.cgi?id=72833 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 10 January 2014, 21:35:15 UTC |
| 1f4a63b | Chuansheng Liu | 07 January 2014, 08:53:34 UTC | xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK() In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to call destroy_work_on_stack() which frees the debug object to pair with INIT_WORK_ONSTACK(). Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 6f96b3063cdd473c68664a190524ed966ac0cd92) | 10 January 2014, 18:39:38 UTC |
| bba719b | Jie Liu | 01 January 2014, 11:28:03 UTC | xfs: fix off-by-one error in xfs_attr3_rmt_verify With CRC check is enabled, if trying to set an attributes value just equal to the maximum size of XATTR_SIZE_MAX would cause the v3 remote attr write verification procedure failure, which would yield the back trace like below: <snip> XFS (sda7): Internal error xfs_attr3_rmt_write_verify at line 191 of file fs/xfs/xfs_attr_remote.c <snip> Call Trace: [<ffffffff816f0042>] dump_stack+0x45/0x56 [<ffffffffa0d99c8b>] xfs_error_report+0x3b/0x40 [xfs] [<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffffa0d99ce5>] xfs_corruption_error+0x55/0x80 [xfs] [<ffffffffa0dbef6b>] xfs_attr3_rmt_write_verify+0x14b/0x1a0 [xfs] [<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d96edd>] _xfs_buf_ioapply+0x6d/0x390 [xfs] [<ffffffff81184cda>] ? vm_map_ram+0x31a/0x460 [<ffffffff81097230>] ? wake_up_state+0x20/0x20 [<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d9726b>] xfs_buf_iorequest+0x6b/0xc0 [xfs] [<ffffffffa0d97315>] xfs_bdstrat_cb+0x55/0xb0 [xfs] [<ffffffffa0d97906>] xfs_bwrite+0x46/0x80 [xfs] [<ffffffffa0dbfa94>] xfs_attr_rmtval_set+0x334/0x490 [xfs] [<ffffffffa0db84aa>] xfs_attr_leaf_addname+0x24a/0x410 [xfs] [<ffffffffa0db8893>] xfs_attr_set_int+0x223/0x470 [xfs] [<ffffffffa0db8b76>] xfs_attr_set+0x96/0xb0 [xfs] [<ffffffffa0db13b2>] xfs_xattr_set+0x42/0x70 [xfs] [<ffffffff811df9b2>] generic_setxattr+0x62/0x80 [<ffffffff811e0213>] __vfs_setxattr_noperm+0x63/0x1b0 [<ffffffff81307afe>] ? evm_inode_setxattr+0xe/0x10 [<ffffffff811e0415>] vfs_setxattr+0xb5/0xc0 [<ffffffff811e054e>] setxattr+0x12e/0x1c0 [<ffffffff811c6e82>] ? final_putname+0x22/0x50 [<ffffffff811c708b>] ? putname+0x2b/0x40 [<ffffffff811cc4bf>] ? user_path_at_empty+0x5f/0x90 [<ffffffff811bdfd9>] ? __sb_start_write+0x49/0xe0 [<ffffffff81168589>] ? vm_mmap_pgoff+0x99/0xc0 [<ffffffff811e07df>] SyS_setxattr+0x8f/0xe0 [<ffffffff81700c2d>] system_call_fastpath+0x1a/0x1f Tests: setfattr -n user.longxattr -v `perl -e 'print "A"x65536'` testfile This patch fix it to check the remote EA size is greater than the XATTR_SIZE_MAX rather than more than or equal to it, because it's valid if the specified EA value size is equal to the limitation as per VFS setxattr interface. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 85dd0707f0cad26d60f2dc574d17a5ab948d10f7) | 10 January 2014, 18:38:41 UTC |
| d6e9c89 | Shahed Shaikh | 09 January 2014, 17:41:05 UTC | qlcnic: Fix ethtool statistics length calculation o Consider number of Tx queues while calculating the length of Tx statistics as part of ethtool stats. o Calculate statistics lenght properly for 82xx and 83xx adapter Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 January 2014, 18:25:29 UTC |
| 1ac6762 | Manish Chopra | 09 January 2014, 17:41:04 UTC | qlcnic: Fix bug in TX statistics o Driver was not updating TX stats so it was not populating statistics in `ifconfig` command output. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 January 2014, 18:25:29 UTC |
| f663dd9 | Jason Wang | 10 January 2014, 08:18:26 UTC | net: core: explicitly select a txq before doing l2 forwarding Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 January 2014, 18:23:08 UTC |
| b13ba1b | Jason Wang | 10 January 2014, 08:18:25 UTC | macvlan: forbid L2 fowarding offload for macvtap L2 fowarding offload will bypass the rx handler of real device. This will make the packet could not be forwarded to macvtap device. Another problem is the dev_hard_start_xmit() called for macvtap does not have any synchronization. Fix this by forbidding L2 forwarding for macvtap. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 January 2014, 18:23:08 UTC |
| c4d7099 | David S. Miller | 10 January 2014, 18:21:22 UTC | Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== For the mac80211 bits, Johannes says: "I have a fix from Javier for mac80211_hwsim when used with wmediumd userspace, and a fix from Felix for buffering in AP mode." For the NFC bits, Samuel says: "This pull request only contains one fix for a regression introduced with commit e29a9e2ae165620d. Without this fix, we can not establish a p2p link in target mode. Only initiator mode works." For the iwlwifi bits, Emmanuel says: "It only includes new device IDs so it's not vital. If you have a pull request to net.git anyway, I'd happy to have this in." ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 10 January 2014, 18:21:22 UTC |
| 95e92fd | Michal Schmidt | 09 January 2014, 13:36:27 UTC | bnx2x: fix DMA unmapping of TSO split BDs bnx2x triggers warnings with CONFIG_DMA_API_DEBUG=y: WARNING: CPU: 0 PID: 2253 at lib/dma-debug.c:887 check_unmap+0xf8/0x920() bnx2x 0000:28:00.0: DMA-API: device driver frees DMA memory with different size [device address=0x00000000da2b389e] [map size=1490 bytes] [unmap size=66 bytes] The reason is that bnx2x splits a TSO BD into two BDs (headers + data) using one DMA mapping for both, but it uses only the length of the first BD when unmapping. This patch fixes the bug by unmapping the whole length of the two BDs. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 January 2014, 18:18:07 UTC |
| 21e20e2 | Linus Torvalds | 10 January 2014, 08:57:23 UTC | Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux Pull clock fixes from Mike Turquette: "Late fixes for clock drivers. All of these fixes are for user-visible regressions, typically boot failures or other unsafe system configuration that causes badness" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: clk-divider: fix divisor > 255 bug clk: exynos: File scope reg_save array should depend on PM_SLEEP clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock ARM: dts: exynos5250: Fix MDMA0 clock number clk: samsung: exynos5250: Add MDMA0 clocks clk: samsung: exynos5250: Fix ACP gate register offset clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks clk: samsung: exynos4: Correct SRC_MFC register | 10 January 2014, 08:57:23 UTC |
| 2aa63ce | Linus Torvalds | 10 January 2014, 08:54:49 UTC | Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for Renesas platforms to fixup DMA masks (this started causing errors once the DMA API added checks for valid masks in 3.13)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: mackerel: Fix coherent DMA mask ARM: shmobile: kzm9g: Fix coherent DMA mask ARM: shmobile: armadillo: Fix coherent DMA mask | 10 January 2014, 08:54:49 UTC |
| 7ad228b | Ville Syrjälä | 07 January 2014, 14:15:36 UTC | drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init() When the pipe A force quirk is applied the code will attempt to grab a crtc mutex during intel_modeset_setup_hw_state(). If we're already holding all crtc mutexes this will obviously deadlock every time. So instead of using drm_modeset_lock_all() just grab the mode_config.mutex. This is enough to avoid the unlocked mutex warnings from certain lower level functions. The regression was introduced in: commit 027476642811f8559cbe00ef6cc54db230e48a20 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Dec 2 11:08:06 2013 +0200 drm/i915: Take modeset locks around intel_modeset_setup_hw_state() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org [danvet: Add cc: stable since the offending commit has that, too.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 10 January 2014, 07:46:19 UTC |
| 07edd74 | Hannes Frederic Sowa | 08 January 2014, 14:43:22 UTC | ipv6: add link-local, sit and loopback address with INFINITY_LIFE_TIME In the past the IFA_PERMANENT flag indicated, that the valid and preferred lifetime where ignored. Since change fad8da3e085ddf ("ipv6 addrconf: fix preferred lifetime state-changing behavior while valid_lft is infinity") we honour at least the preferred lifetime on those addresses. As such the valid lifetime gets recalculated and updated to 0. If loopback address is added manually this problem does not occur. Also if NetworkManager manages IPv6, those addresses will get added via inet6_rtm_newaddr and thus will have a correct lifetime, too. Reported-by: François-Xavier Le Bail <fx.lebail@yahoo.com> Reported-by: Damien Wyart <damien.wyart@gmail.com> Fixes: fad8da3e085ddf ("ipv6 addrconf: fix preferred lifetime state-changing behavior while valid_lft is infinity") Cc: Yasushi Asano <yasushi.asano@jp.fujitsu.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 January 2014, 04:07:47 UTC |
| 9a2620c | Yuval Mintz | 07 January 2014, 10:07:41 UTC | bnx2x: prevent WARN during driver unload Starting with commit 80c33dd "net: add might_sleep() call to napi_disable" bnx2x fails the might_sleep tests causing a stack trace to appear whenever the driver is unloaded, as local_bh_disable() is being called before napi_disable(). This changes the locking schematics related to CONFIG_NET_RX_BUSY_POLL, preventing the need for calling local_bh_disable() and thus eliminating the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 10 January 2014, 02:46:06 UTC |
| 13de22c | Rafael J. Wysocki | 10 January 2014, 02:08:58 UTC | Merge branch 'pm-cpuidle' * pm-cpuidle: intel_idle: close avn_cstates array with correct marker Revert "intel_idle: mark states tables with __initdata tag" | 10 January 2014, 02:08:58 UTC |
| 8839099 | Jiang Liu | 09 January 2014, 07:30:27 UTC | intel_idle: close avn_cstates array with correct marker Close avn_cstates array with correct marker to avoid overflow in function intel_idle_cpu_init(). [rjw: The problem was introduced when commit 22e580d07f65 was merged on top of eba682a5aeb6 (intel_idle: shrink states tables).] Fixes: 22e580d07f65 (intel_idle: Fixed C6 state on Avoton/Rangeley processors) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 10 January 2014, 02:06:06 UTC |
| 1739f09 | Steven Rostedt | 13 November 2013, 20:20:04 UTC | ftrace/x86: Load ftrace_ops in parameter not the variable holding it Function tracing callbacks expect to have the ftrace_ops that registered it passed to them, not the address of the variable that holds the ftrace_ops that registered it. Use a mov instead of a lea to store the ftrace_ops into the parameter of the function tracing callback. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20131113152004.459787f9@gandalf.local.home Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.8+ | 09 January 2014, 21:24:29 UTC |
| 0f74d82 | John W. Linville | 09 January 2014, 15:19:01 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem | 09 January 2014, 15:19:01 UTC |
| ba0dc81 | Jiang Liu | 09 January 2014, 07:30:26 UTC | Revert "intel_idle: mark states tables with __initdata tag" This reverts commit 9d046ccb98085f1d437585f84748c783a04ba240. Commit 9d046ccb98085 marks all state tables with __initdata, but the state table may be accessed when doing CPU online, which then causing system crash as below: [ 204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8 [ 204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062 [ 204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio [ 204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48 [ 204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013 [ 204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000 [ 204.290311] RIP: 0010:[<ffffffff814aa1c0>] [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.300184] RSP: 0018:ffff880440fadd28 EFLAGS: 00010286 [ 204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007 [ 204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120 [ 204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001 [ 204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e [ 204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000 [ 204.346743] FS: 00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000 [ 204.355919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0 [ 204.370520] Stack: [ 204.372853] 000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307 [ 204.381519] ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000 [ 204.390196] 000000000000001e 0000000000000002 0000000000000002 0000000000000000 [ 204.398856] Call Trace: [ 204.401683] [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70 [ 204.408638] [<ffffffff8185a230>] notifier_call_chain+0x100/0x150 [ 204.415553] [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10 [ 204.422772] [<ffffffff81072163>] cpu_notify+0x23/0x50 [ 204.428616] [<ffffffff810723b2>] _cpu_up+0x132/0x1a0 [ 204.434361] [<ffffffff8107249d>] cpu_up+0x7d/0xa0 [ 204.439819] [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90 [ 204.446345] [<ffffffff81554625>] device_online+0x45/0xa0 [ 204.452471] [<ffffffff815546ce>] online_store+0x4e/0x80 [ 204.458511] [<ffffffff815519a8>] dev_attr_store+0x18/0x30 [ 204.464744] [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0 [ 204.471681] [<ffffffff81217ef1>] vfs_write+0xe1/0x160 [ 204.477524] [<ffffffff8121889c>] SyS_write+0x4c/0x90 [ 204.483270] [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f [ 204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79 [ 204.515723] RIP [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.522996] RSP <ffff880440fadd28> [ 204.526976] CR2: ffffffff8227cce8 [ 204.530766] ---[ end trace 336f56cc3d1cfc8c ]--- Fixes: 9d046ccb98085 (intel_idle: mark states tables with __initdata tag) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 09 January 2014, 13:13:05 UTC |
| 7d1c153 | Linus Torvalds | 09 January 2014, 01:09:26 UTC | Merge branch 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "This patch fixes the kmap/kunmap implementation on parisc and finally makes AIO work on parisc" * 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Ensure full cache coherency for kmap/kunmap | 09 January 2014, 01:09:26 UTC |
| f882915 | Linus Torvalds | 09 January 2014, 01:08:23 UTC | Merge branch 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Late fixes for libata. Nothing too interesting. Adding missing PM callbacks to satat_sis and an additional PCI ID for ahci" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_sis: missing PM support ahci: add PCI ID for Marvell 88SE9170 SATA controller | 09 January 2014, 01:08:23 UTC |
| f8dae00 | John David Anglin | 06 January 2014, 02:25:00 UTC | parisc: Ensure full cache coherency for kmap/kunmap Helge Deller noted a few weeks ago problems with the AIO support on parisc. This change is the result of numerous iterations on how best to deal with this problem. The solution adopted here is to provide full cache coherency in a uniform manner on all parisc systems. This involves calling flush_dcache_page() on kmap operations and flush_kernel_dcache_page() on kunmap operations. As a result, the copy_user_page() and clear_user_page() functions can be removed and the overall code is simpler. The change ensures that both userspace and kernel aliases to a mapped page are invalidated and flushed. This is necessary for the correct operation of PA8800 and PA8900 based systems which do not support inequivalent aliases. With this change, I have observed no cache related issues on c8000 and rp3440. It is now possible for example to do kernel builds with "-j64" on four way systems. On systems using XFS file systems, the patch recently posted by Mikulas Patocka to "fix crash using XFS on loopback" is needed to avoid a hang caused by an uninitialized lock passed to flush_dcache_page() in the page struct. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Helge Deller <deller@gmx.de> | 08 January 2014, 22:02:57 UTC |
| 2eff7c7 | John W. Linville | 08 January 2014, 18:36:17 UTC | Merge tag 'nfc-fixes-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes Samuel Ortiz <sameo@linux.intel.com> says: "This is the first NFC fixes pull request for 3.13. It only contains one fix for a regression introduced with commit e29a9e2ae165620d. Without this fix, we can not establish a p2p link in target mode. Only initiator mode works." Signed-off-by: John W. Linville <linville@tuxdriver.com> | 08 January 2014, 18:36:17 UTC |
| 778037e | James Hogan | 16 December 2013, 10:41:38 UTC | clk: clk-divider: fix divisor > 255 bug Commit 6d9252bd9a4bb (clk: Add support for power of two type dividers) merged in v3.6 added the _get_val function to convert a divisor value to a register field value depending on the flags. However it used the type u8 for the div field, causing divisors larger than 255 to be masked and the resultant clock rate to be too high. E.g. in my case an 11bit divider was supposed to divide 24.576 MHz down to 32.768KHz. The divisor was correctly calculated as 750 (0x2ee). This was masked to 238 (0xee) resulting in a frequency of 103.26KHz. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Mike Turquette <mturquette@linaro.org> | 08 January 2014, 16:33:12 UTC |
| 0882dae | Paulo Zanoni | 08 January 2014, 13:12:27 UTC | drm/i915: fix DDI PLLs HW state readout code Properly zero the refcounts and crtc->ddi_pll_set so the previous HW state doesn't affect the result of reading the current HW state. This fixes WARNs about WRPLL refcount if we have an HDMI monitor on HSW and then suspend/resume. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64379 Tested-by: Qingshuai Tian <qingshuai.tian@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 08 January 2014, 14:54:09 UTC |
| ceb3b02 | Dave Airlie | 08 January 2014, 07:57:45 UTC | Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/nouveau/linux-2.6 into drm-fixes misc fixes for nouveau, one more msi rearm, regression fix for old bioses crash and leak fixes. * 'drm-nouveau-next' of git://anongit.freedesktop.org/nouveau/linux-2.6: drm/nouveau/nouveau: fix memory leak in nouveau_crtc_page_flip() drm/nouveau/bios: fix offset calculation for BMPv1 bioses drm/nouveau: return offset of allocated notifier drm/nouveau/bios: make jump conditional drm/nvce/mc: fix msi rearm on GF114 drm/nvc0/gr: fix mthd data submission drm/nouveau: populate master subdev pointer only when fully constructed | 08 January 2014, 07:57:45 UTC |
| a3f28ef | Dave Airlie | 08 January 2014, 07:55:44 UTC | Merge tag 'drm-intel-fixes-2014-01-08' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just a revert (gen4 backlight seems a lost cause) and a tlb coherency fix for bdw, plus the patch to sign up Jani for co-maintainer. Thanks to Ben for taking care of -fixes while I've enjoyed a bit of vacation. * tag 'drm-intel-fixes-2014-01-08' of git://people.freedesktop.org/~danvet/drm-intel: MAINTAINERS: Updates for drm/i915 Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM" drm/i915/bdw: Flush system agent on gen8 also | 08 January 2014, 07:55:44 UTC |
| bbc6319 | Christian Engelmayer | 29 December 2013, 22:08:54 UTC | drm/nouveau/nouveau: fix memory leak in nouveau_crtc_page_flip() Fix a memory leak in the nouveau_crtc_page_flip() error handling path. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 08 January 2014, 06:17:48 UTC |
| 5d2f476 | Ilia Mirkin | 07 January 2014, 17:33:59 UTC | drm/nouveau/bios: fix offset calculation for BMPv1 bioses The only BIOS on record that needs the 14 offset has a bios major version 2 but BMP version 1.01. Another bunch of BIOSes that need the 18 offset have BMP version 2.01 or 5.01 or higher. So instead of looking at the bios major version, look at the BMP version. BIOSes with BMP version 0 do not contain a detectable script, so always return 0 for them. See https://bugs.freedesktop.org/show_bug.cgi?id=68835 Reported-by: Mauro Molinari <mauromol@tiscali.it> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 08 January 2014, 05:56:10 UTC |
| a04c0e2 | David S. Miller | 07 January 2014, 23:38:03 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== The following patchset contains two patches: * fix the IRC NAT helper which was broken when adding (incomplete) IPv6 support, from Daniel Borkmann. * Refine the previous bugtrap that Jesper added to catch problems for the usage of the sequence adjustment extension in IPVs in Dec 16th, it may spam messages in case of finding a real bug. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 07 January 2014, 23:38:17 UTC |
| 732256b | Erik Hugne | 07 January 2014, 20:51:36 UTC | tipc: correctly unlink packets from deferred packet queue When we pull a received packet from a link's 'deferred packets' queue for processing, its 'next' pointer is not cleared, and still refers to the next packet in that queue, if any. This is incorrect, but caused no harm before commit 40ba3cdf542a469aaa9083fa041656e59b109b90 ("tipc: message reassembly using fragment chain") was introduced. After that commit, it may sometimes lead to the following oops: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: tipc CPU: 4 PID: 0 Comm: swapper/4 Tainted: G W 3.13.0-rc2+ #6 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880017af4880 ti: ffff880017aee000 task.ti: ffff880017aee000 RIP: 0010:[<ffffffff81710694>] [<ffffffff81710694>] skb_try_coalesce+0x44/0x3d0 RSP: 0018:ffff880016603a78 EFLAGS: 00010212 RAX: 6b6b6b6bd6d6d6d6 RBX: ffff880013106ac0 RCX: ffff880016603ad0 RDX: ffff880016603ad7 RSI: ffff88001223ed00 RDI: ffff880013106ac0 RBP: ffff880016603ab8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88001223ed00 R13: ffff880016603ad0 R14: 000000000000058c R15: ffff880012297650 FS: 0000000000000000(0000) GS:ffff880016600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000805b000 CR3: 0000000011f5d000 CR4: 00000000000006e0 Stack: ffff880016603a88 ffffffff810a38ed ffff880016603aa8 ffff88001223ed00 0000000000000001 ffff880012297648 ffff880016603b68 ffff880012297650 ffff880016603b08 ffffffffa0006c51 ffff880016603b08 00ffffffa00005fc Call Trace: <IRQ> [<ffffffff810a38ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffa0006c51>] tipc_link_recv_fragment+0xd1/0x1b0 [tipc] [<ffffffffa0007214>] tipc_recv_msg+0x4e4/0x920 [tipc] [<ffffffffa00016f0>] ? tipc_l2_rcv_msg+0x40/0x250 [tipc] [<ffffffffa000177c>] tipc_l2_rcv_msg+0xcc/0x250 [tipc] [<ffffffffa00016f0>] ? tipc_l2_rcv_msg+0x40/0x250 [tipc] [<ffffffff8171e65b>] __netif_receive_skb_core+0x80b/0xd00 [<ffffffff8171df94>] ? __netif_receive_skb_core+0x144/0xd00 [<ffffffff8171eb76>] __netif_receive_skb+0x26/0x70 [<ffffffff8171ed6d>] netif_receive_skb+0x2d/0x200 [<ffffffff8171fe70>] napi_gro_receive+0xb0/0x130 [<ffffffff815647c2>] e1000_clean_rx_irq+0x2c2/0x530 [<ffffffff81565986>] e1000_clean+0x266/0x9c0 [<ffffffff81985f7b>] ? notifier_call_chain+0x2b/0x160 [<ffffffff8171f971>] net_rx_action+0x141/0x310 [<ffffffff81051c1b>] __do_softirq+0xeb/0x480 [<ffffffff819817bb>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810b8c42>] ? handle_fasteoi_irq+0x72/0x100 [<ffffffff81052346>] irq_exit+0x96/0xc0 [<ffffffff8198cbc3>] do_IRQ+0x63/0xe0 [<ffffffff81981def>] common_interrupt+0x6f/0x6f <EOI> This happens when the last fragment of a message has passed through the the receiving link's 'deferred packets' queue, and at least one other packet was added to that queue while it was there. After the fragment chain with the complete message has been successfully delivered to the receiving socket, it is released. Since 'next' pointer of the last fragment in the released chain now is non-NULL, we get the crash shown above. We fix this by clearing the 'next' pointer of all received packets, including those being pulled from the 'deferred' queue, before they undergo any further processing. Fixes: 40ba3cdf542a4 ("tipc: message reassembly using fragment chain") Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reported-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 January 2014, 21:15:24 UTC |
| 657e5d1 | Li RongQing | 07 January 2014, 07:39:43 UTC | ipv6: pcpu_tstats.syncp should be initialised in ip6_vti.c initialise pcpu_tstats.syncp to kill the calltrace [ 11.973950] Call Trace: [ 11.973950] [<819bbaff>] dump_stack+0x48/0x60 [ 11.973950] [<819bbaff>] dump_stack+0x48/0x60 [ 11.973950] [<81078dcf>] __lock_acquire.isra.22+0x1bf/0xc10 [ 11.973950] [<81078dcf>] __lock_acquire.isra.22+0x1bf/0xc10 [ 11.973950] [<81079fa7>] lock_acquire+0x77/0xa0 [ 11.973950] [<81079fa7>] lock_acquire+0x77/0xa0 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<8183862d>] ip_tunnel_get_stats64+0x6d/0x230 [ 11.973950] [<8183862d>] ip_tunnel_get_stats64+0x6d/0x230 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<811cf8c1>] ? __nla_reserve+0x21/0xd0 [ 11.973950] [<811cf8c1>] ? __nla_reserve+0x21/0xd0 [ 11.973950] [<817ca7ab>] dev_get_stats+0xcb/0x130 [ 11.973950] [<817ca7ab>] dev_get_stats+0xcb/0x130 [ 11.973950] [<817d5409>] rtnl_fill_ifinfo+0x569/0xe20 [ 11.973950] [<817d5409>] rtnl_fill_ifinfo+0x569/0xe20 [ 11.973950] [<810352e0>] ? kvm_clock_read+0x20/0x30 [ 11.973950] [<810352e0>] ? kvm_clock_read+0x20/0x30 [ 11.973950] [<81008e38>] ? sched_clock+0x8/0x10 [ 11.973950] [<81008e38>] ? sched_clock+0x8/0x10 [ 11.973950] [<8106ba45>] ? sched_clock_local+0x25/0x170 [ 11.973950] [<8106ba45>] ? sched_clock_local+0x25/0x170 [ 11.973950] [<810da6bd>] ? __kmalloc+0x3d/0x90 [ 11.973950] [<810da6bd>] ? __kmalloc+0x3d/0x90 [ 11.973950] [<817b8c10>] ? __kmalloc_reserve.isra.41+0x20/0x70 [ 11.973950] [<817b8c10>] ? __kmalloc_reserve.isra.41+0x20/0x70 [ 11.973950] [<810da81a>] ? slob_alloc_node+0x2a/0x60 [ 11.973950] [<810da81a>] ? slob_alloc_node+0x2a/0x60 [ 11.973950] [<817b919a>] ? __alloc_skb+0x6a/0x2b0 [ 11.973950] [<817b919a>] ? __alloc_skb+0x6a/0x2b0 [ 11.973950] [<817d8795>] rtmsg_ifinfo+0x65/0xe0 [ 11.973950] [<817d8795>] rtmsg_ifinfo+0x65/0xe0 [ 11.973950] [<817cbd31>] register_netdevice+0x531/0x5a0 [ 11.973950] [<817cbd31>] register_netdevice+0x531/0x5a0 [ 11.973950] [<81892b87>] ? ip6_tnl_get_cap+0x27/0x90 [ 11.973950] [<81892b87>] ? ip6_tnl_get_cap+0x27/0x90 [ 11.973950] [<817cbdb6>] register_netdev+0x16/0x30 [ 11.973950] [<817cbdb6>] register_netdev+0x16/0x30 [ 11.973950] [<81f574a6>] vti6_init_net+0x1c4/0x1d4 [ 11.973950] [<81f574a6>] vti6_init_net+0x1c4/0x1d4 [ 11.973950] [<81f573af>] ? vti6_init_net+0xcd/0x1d4 [ 11.973950] [<81f573af>] ? vti6_init_net+0xcd/0x1d4 [ 11.973950] [<817c16df>] ops_init.constprop.11+0x17f/0x1c0 [ 11.973950] [<817c16df>] ops_init.constprop.11+0x17f/0x1c0 [ 11.973950] [<817c1779>] register_pernet_operations.isra.9+0x59/0x90 [ 11.973950] [<817c1779>] register_pernet_operations.isra.9+0x59/0x90 [ 11.973950] [<817c18d1>] register_pernet_device+0x21/0x60 [ 11.973950] [<817c18d1>] register_pernet_device+0x21/0x60 [ 11.973950] [<81f574b6>] ? vti6_init_net+0x1d4/0x1d4 [ 11.973950] [<81f574b6>] ? vti6_init_net+0x1d4/0x1d4 [ 11.973950] [<81f574c7>] vti6_tunnel_init+0x11/0x68 [ 11.973950] [<81f574c7>] vti6_tunnel_init+0x11/0x68 [ 11.973950] [<81f572a1>] ? mip6_init+0x73/0xb4 [ 11.973950] [<81f572a1>] ? mip6_init+0x73/0xb4 [ 11.973950] [<81f0cba4>] do_one_initcall+0xbb/0x15b [ 11.973950] [<81f0cba4>] do_one_initcall+0xbb/0x15b [ 11.973950] [<811a00d8>] ? sha_transform+0x528/0x1150 [ 11.973950] [<811a00d8>] ? sha_transform+0x528/0x1150 [ 11.973950] [<81f0c544>] ? repair_env_string+0x12/0x51 [ 11.973950] [<81f0c544>] ? repair_env_string+0x12/0x51 [ 11.973950] [<8105c30d>] ? parse_args+0x2ad/0x440 [ 11.973950] [<8105c30d>] ? parse_args+0x2ad/0x440 [ 11.973950] [<810546be>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 11.973950] [<810546be>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 11.973950] [<81f0cd27>] kernel_init_freeable+0xe3/0x182 [ 11.973950] [<81f0cd27>] kernel_init_freeable+0xe3/0x182 [ 11.973950] [<81f0c532>] ? do_early_param+0x7a/0x7a [ 11.973950] [<81f0c532>] ? do_early_param+0x7a/0x7a [ 11.973950] [<819b5b1b>] kernel_init+0xb/0x100 [ 11.973950] [<819b5b1b>] kernel_init+0xb/0x100 [ 11.973950] [<819cebf7>] ret_from_kernel_thread+0x1b/0x28 [ 11.973950] [<819cebf7>] ret_from_kernel_thread+0x1b/0x28 [ 11.973950] [<819b5b10>] ? rest_init+0xc0/0xc0 [ 11.973950] [<819b5b10>] ? rest_init+0xc0/0xc0 Before 469bdcefdc ("ipv6: fix the use of pcpu_tstats in ip6_vti.c"), the pcpu_tstats.syncp is not used to pretect the 64bit elements of pcpu_tstats, so not appear this calltrace. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 January 2014, 19:12:46 UTC |
| 47f9564 | Daniel Vetter | 07 January 2014, 08:24:31 UTC | MAINTAINERS: Updates for drm/i915 Jani for co-maintainer! Jani has been a really active bug-scrubber in the past few months. I've asked him whether he wants to do this in a more official capacity and he agreed. I've already chatted with Dave and Jesse and they support this. Note that everyone can't now just relax because "Jani will do all the bug scrubbing" - au contraire expect more nagging and poking now that we have more bandwidth. Longer-term the plan is to share more of the maintainer duties, but we need to fix up the infrastructure a bit first (like moving the git repo to a common location). While at it also add the newly set-up patchwork instance. Cc: Dave Airlie <airlied@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 07 January 2014, 08:33:16 UTC |
| c1ccaa6 | Bob Gleitsmann | 05 January 2014, 22:59:07 UTC | drm/nouveau: return offset of allocated notifier Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 07 January 2014, 03:38:06 UTC |
| 6d60792 | Ilia Mirkin | 06 January 2014, 01:07:02 UTC | drm/nouveau/bios: make jump conditional This fixes a hang in VBIOS scripts of the form "condition; jump". The jump used to always be executed, while now it will only be executed if the condition is true. See https://bugs.freedesktop.org/show_bug.cgi?id=72943 Reported-by: Darcy Brás da Silva <dardevelin@cidadecool.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org | 07 January 2014, 03:37:55 UTC |
| 6e9cbb4 | Sid Boyce | 05 January 2014, 23:12:05 UTC | drm/nvce/mc: fix msi rearm on GF114 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 07 January 2014, 03:37:54 UTC |
| 854cc0e | Kelly Doran | 20 December 2013, 17:07:26 UTC | drm/nvc0/gr: fix mthd data submission If the initial data element is 0, it will never be written, even though the value from the previous method may be there. Signed-off-by: Kelly Doran <kel.p.doran@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 07 January 2014, 03:37:54 UTC |
| 61b365a | Ben Skeggs | 26 November 2013, 23:46:56 UTC | drm/nouveau: populate master subdev pointer only when fully constructed Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 07 January 2014, 03:37:36 UTC |
| ef350bb | Linus Torvalds | 07 January 2014, 00:22:42 UTC | Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfix from Ted Ts'o: "Fix a regression introduced in v3.13-rc6" * tag 'ext4_for_linus_stable' of http://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix bigalloc regression | 07 January 2014, 00:22:42 UTC |
| a707271 | Linus Torvalds | 07 January 2014, 00:16:28 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "I'm hoping this is the very last batch of networking fixes for 3.13, here goes nothing: 1) Fix crashes in VLAN's header_ops passthru. 2) Bridge multicast code needs to use BH spinlocks to prevent deadlocks with timers. From Curt Brune. 3) ipv6 tunnels lack proper synchornization when updating percpu statistics. From Li RongQing. 4) Fixes to bnx2x driver from Yaniv Rosner, Dmitry Kravkov and Michal Kalderon. 5) Avoid undefined operator evaluation order in llc code, from Daniel Borkmann. 6) Error paths in various GSO offload paths do not unwind properly, in particular they must undo any modifications they have made to the SKB. From Wei-Chun Chao. 7) Fix RX refill races during restore in virtio-net, from Jason Wang. 8) Fix SKB use after free in LLC code, from Daniel Borkmann. 9) Missing unlock and OOPS in netpoll code when VLAN tag handling fails. 10) Fix vxlan device attachment wrt ipv6, from Fan Du. 11) Don't allow creating infiniband links to non-infiniband devices, from Hangbin Liu. 12) Revert FEC phy reset active low change, it breaks things. From Fabio Estevam. 13) Fix header pointer handling in 6lowpan header building code, from Daniel Borkmann. 14) Fix RSS handling in be2net driver, from Vasundhara Volam. 15) Fix modem port indexing in HSO driver, from Dan Williams" * http://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) bridge: use spin_lock_bh() in br_multicast_set_hash_max ipv6: don't install anycast address for /128 addresses on routers hso: fix handling of modem port SERIAL_STATE notifications isdn: Drop big endian cpp checks from telespci and hfc_pci drivers be2net: fix max_evt_qs calculation for BE3 in SR-IOV config be2net: increase the timeout value for loopback-test FW cmd be2net: disable RSS when number of RXQs is reduced to 1 via set-channels xen-netback: Include header for vmalloc net: 6lowpan: fix lowpan_header_create non-compression memcpy call fec: Revert "fec: Do not assume that PHY reset is active low" bnx2x: fix VLAN configuration for VFs. bnx2x: fix AFEX memory overflow bnx2x: Clean before update RSS arrives bnx2x: Correct number of MSI-X vectors for VFs bnx2x: limit number of interrupt vectors for 57711 qlcnic: Fix bug in Tx completion path infiniband: make sure the src net is infiniband when create new link {vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properly cxgb4: allow large buffer size to have page size netpoll: Fix missing TXQ unlock and and OOPS. ... | 07 January 2014, 00:16:28 UTC |
| 77410ba | Rafael J. Wysocki | 06 January 2014, 21:49:08 UTC | Merge branches 'acpi-battery' and 'pm-cpufreq' * acpi-battery: ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS * pm-cpufreq: intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters. | 06 January 2014, 21:49:08 UTC |
| fe0d692 | Curt Brune | 06 January 2014, 19:00:32 UTC | bridge: use spin_lock_bh() in br_multicast_set_hash_max br_multicast_set_hash_max() is called from process context in net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function. br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock), which can deadlock the CPU if a softirq that also tries to take the same lock interrupts br_multicast_set_hash_max() while the lock is held . This can happen quite easily when any of the bridge multicast timers expire, which try to take the same lock. The fix here is to use spin_lock_bh(), preventing other softirqs from executing on this CPU. Steps to reproduce: 1. Create a bridge with several interfaces (I used 4). 2. Set the "multicast query interval" to a low number, like 2. 3. Enable the bridge as a multicast querier. 4. Repeatedly set the bridge hash_max parameter via sysfs. # brctl addbr br0 # brctl addif br0 eth1 eth2 eth3 eth4 # brctl setmcqi br0 2 # brctl setmcquerier br0 1 # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done Signed-off-by: Curt Brune <curt@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 21:39:47 UTC |
| 88ad314 | Hannes Frederic Sowa | 06 January 2014, 16:53:14 UTC | ipv6: don't install anycast address for /128 addresses on routers It does not make sense to create an anycast address for an /128-prefix. Suppress it. As 32019e651c6fce ("ipv6: Do not leave router anycast address for /127 prefixes.") shows we also may not leave them, because we could accidentally remove an anycast address the user has allocated or got added via another prefix. Cc: François-Xavier Le Bail <fx.lebail@yahoo.com> Cc: Thomas Haller <thaller@redhat.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 21:32:43 UTC |
| e5e97ee | Dan Williams | 06 January 2014, 16:07:29 UTC | hso: fix handling of modem port SERIAL_STATE notifications The existing serial state notification handling expected older Option devices, having a hardcoded assumption that the Modem port was always USB interface #2. That isn't true for devices from the past few years. hso_serial_state_notification is a local cache of a USB Communications Interface Class SERIAL_STATE notification from the device, and the USB CDC specification (section 6.3, table 67 "Class-Specific Notifications") defines wIndex as the USB interface the event applies to. For hso devices this will always be the Modem port, as the Modem port is the only port which is set up to receive them by the driver. So instead of always expecting USB interface #2, instead validate the notification with the actual USB interface number of the Modem port. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 21:29:44 UTC |
| a90b403 | Lan Tianyu | 06 January 2014, 14:50:37 UTC | ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS The AML method _BIX of NEC LZ750/LS returns a broken package which skips the first member "Revision" (ACPI 5.0, Table 10-234). Add a quirk for this machine to skip member "Revision" during parsing the package returned by _BIX. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=67351 Reported-and-tested-by: Francisco Castro <fcr@adinet.com.uy> Cc: 3.8+ <stable@vger.kernel.org> " 3.8+ Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 06 January 2014, 21:28:57 UTC |
| 6cbd7ee | Dirk Brandewie | 06 January 2014, 18:59:16 UTC | intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters. KVM environments do not support APERF/MPERF MSRs. intel_pstate cannot operate without these registers. The previous validity checks in intel_pstate_msrs_not_valid() are insufficent in nested KVMs. References: https://bugzilla.redhat.com/show_bug.cgi?id=1046317 Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 06 January 2014, 21:16:14 UTC |
| 22d3b76 | Guenter Roeck | 06 January 2014, 04:31:39 UTC | isdn: Drop big endian cpp checks from telespci and hfc_pci drivers With arm:allmodconfig, building the Teles PCI driver fails with telespci.c:294:2: error: #error "not running on big endian machines now" Similar, building the driver for HFC PCI-Bus cards fails with hfc_pci.c:1647:2: error: #error "not running on big endian machines now" Remove the big endian cpp check from both drivers to fix the build errors. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 20:50:51 UTC |
| e46316c | John W. Linville | 06 January 2014, 19:20:07 UTC | Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes | 06 January 2014, 19:20:07 UTC |
| a50f9d5 | John W. Linville | 06 January 2014, 19:19:18 UTC | Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 | 06 January 2014, 19:19:18 UTC |
| d0abafa | Eric Whitney | 06 January 2014, 19:00:23 UTC | ext4: fix bigalloc regression Commit f5a44db5d2 introduced a regression on filesystems created with the bigalloc feature (cluster size > blocksize). It causes xfstests generic/006 and /013 to fail with an unexpected JBD2 failure and transaction abort that leaves the test file system in a read only state. Other xfstests run on bigalloc file systems are likely to fail as well. The cause is the accidental use of a cluster mask where a cluster offset was needed in ext4_ext_map_blocks(). Signed-off-by: Eric Whitney <enwlinux@gmail.com> | 06 January 2014, 19:00:23 UTC |
| ce08884 | David S. Miller | 06 January 2014, 18:09:26 UTC | Merge branch 'be2net' Sathya Perla says: ==================== be2net: patch set Pls apply the following bug fixes to the 'net' tree. Thanks. Suresh Reddy (2): be2net: increase the timeout value for loopback-test FW cmd be2net: fix max_evt_qs calculation for BE3 in SR-IOV config Vasundhara Volam (1): be2net: disable RSS when number of RXQs is reduced to 1 via set-channels ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 18:09:26 UTC |
| e3dc867 | Suresh Reddy | 06 January 2014, 07:32:25 UTC | be2net: fix max_evt_qs calculation for BE3 in SR-IOV config The driver wrongly assumes 16 EQs/vectors are available for each BE3 PF. When SR-IOV is enabled, a BE3 PF can support only a max of 8 EQs. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 18:09:21 UTC |
| 5eeff63 | Suresh Reddy | 06 January 2014, 07:32:24 UTC | be2net: increase the timeout value for loopback-test FW cmd The loopback test FW cmd may need upto 15 seconds to complete on certain PHYs. This patch also fixes the name of the completion variable used to synchronize FW cmd completions as it not used by the flashing cmd alone anymore. Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 18:09:21 UTC |
| da1388d | Vasundhara Volam | 06 January 2014, 07:32:23 UTC | be2net: disable RSS when number of RXQs is reduced to 1 via set-channels When *only* the default RXQ is used, the RSS policy must be disabled so that all IP and no-IP traffic is placed into the default RXQ. If not, IP traffic is dropped. Also, issue the RSS_CONFIG cmd only if FW advertises RSS capability for the interface. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 18:09:21 UTC |
| f2661ad | Jesper Dangaard Brouer | 04 January 2014, 13:10:43 UTC | netfilter: only warn once on wrong seqadj usage Avoid potentially spamming the kernel log with WARN splash messages when catching wrong usage of seqadj, by simply using WARN_ONCE. This is a followup to commit db12cf274353 (netfilter: WARN about wrong usage of sequence number adjustments) Suggested-by: Flavio Leitner <fbl@redhat.com> Suggested-by: Daniel Borkmann <dborkman@redhat.com> Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 06 January 2014, 13:23:17 UTC |
| 2690d97 | Daniel Borkmann | 31 December 2013, 15:28:39 UTC | netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper Commit 5901b6be885e attempted to introduce IPv6 support into IRC NAT helper. By doing so, the following code seemed to be removed by accident: ip = ntohl(exp->master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip); sprintf(buffer, "%u %u", ip, port); pr_debug("nf_nat_irc: inserting '%s' == %pI4, port %u\n", buffer, &ip, port); This leads to the fact that buffer[] was left uninitialized and contained some stack value. When we call nf_nat_mangle_tcp_packet(), we call strlen(buffer) on excatly this uninitialized buffer. If we are unlucky and the skb has enough tailroom, we overwrite resp. leak contents with values that sit on our stack into the packet and send that out to the receiver. Since the rather informal DCC spec [1] does not seem to specify IPv6 support right now, we log such occurences so that admins can act accordingly, and drop the packet. I've looked into XChat source, and IPv6 is not supported there: addresses are in u32 and print via %u format string. Therefore, restore old behaviour as in IPv4, use snprintf(). The IRC helper does not support IPv6 by now. By this, we can safely use strlen(buffer) in nf_nat_mangle_tcp_packet() and prevent a buffer overflow. Also simplify some code as we now have ct variable anyway. [1] http://www.irchelp.org/irchelp/rfc/ctcpspec.html Fixes: 5901b6be885e ("netfilter: nf_nat: support IPv6 in IRC NAT helper") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> | 06 January 2014, 13:17:17 UTC |
| be505f6 | Alexander van Heukelum | 28 December 2013, 20:00:39 UTC | Revert "drm/i915: assume all GM45 Acer laptops use inverted backlight PWM" My Acer 8510TZ stops displaying anything when X starts with Linus' current tree. I bisected it down to commit ee1452d74584. This patch reverts commit ee1452d74584. After the revert, everything works as before. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Reported-by: Dylan Borg <borgdylan@hotmail.com> (for a Acer Extensa 5635Z) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 06 January 2014, 10:16:39 UTC |
| 058840c | Ben Widawsky | 24 December 2013, 23:18:54 UTC | drm/i915/bdw: Flush system agent on gen8 also gem_gtt_cpu_tlb seems to indicate that it is needed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72869 Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 06 January 2014, 10:11:04 UTC |
| 497d221 | Mike Turquette | 06 January 2014, 05:36:43 UTC | Merge tag 'samsung-clk-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-fixes Samsung Clock fixes for 3.13-rc7 * Several patches fixing up incorrectly defined register addresses and bitfield offsets that could lead to undefined operation when accessing respective registers or bitfields. 1) clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks 2a) clk: samsung: exynos5250: Fix ACP gate register offset 2b) clk: samsung: exynos5250: Add MDMA0 clocks 2c) ARM: dts: exynos5250: Fix MDMA0 clock number 3) clk: samsung: exynos4: Correct SRC_MFC register All three issues have been present since Exynos5250 and Exynos4 clock drivers were added by commits 6e3ad26816b72 ("clk: exynos5250: register clocks using common clock framework") and e062b571777f5 ("clk: exynos4: register clocks using common clock framework") respectively. * Patch to fix automatic disabling of Exynos5250 sysreg clock that could cause undefined operation of several peripherals, such as USB, I2C, MIPI or display block. 4) clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock Present since Exynos5250 clock drivers was added by commits 6e3ad26816b72 ("clk: exynos5250: register clocks using common clock framework"). * Patch fixing compilation warning in clk-exynos-audss driver when CONFIG_PM_SLEEP is disabled. 5) clk: exynos: File scope reg_save array should depend on PM_SLEEP Present since the driver was added by commit 1241ef94ccc3 ("clk: samsung: register audio subsystem clocks using common clock framework"). | 06 January 2014, 05:36:43 UTC |
| f35f76e | Josh Boyer | 05 January 2014, 15:24:01 UTC | xen-netback: Include header for vmalloc Commit ac3d5ac27735 ("xen-netback: fix guest-receive-side array sizes") added calls to vmalloc and vfree in the interface.c file without including <linux/vmalloc.h>. This causes build failures if the -Werror=implicit-function-declaration flag is passed. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 01:34:36 UTC |
| 965801e | Daniel Borkmann | 06 January 2014, 00:45:50 UTC | net: 6lowpan: fix lowpan_header_create non-compression memcpy call In function lowpan_header_create(), we invoke the following code construct: struct ipv6hdr *hdr; ... hdr = ipv6_hdr(skb); ... if (...) memcpy(hc06_ptr + 1, &hdr->flow_lbl[1], 2); else memcpy(hc06_ptr, &hdr, 4); Where the else path of the condition, that is, non-compression path, calls memcpy() with a pointer to struct ipv6hdr *hdr as source, thus two levels of indirection. This cannot be correct, and likely only one level of pointer was intended as source buffer for memcpy() here. Fixes: 44331fe2aa0d ("IEEE802.15.4: 6LoWPAN basic support") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 01:25:24 UTC |
| 7d30622 | Fabio Estevam | 06 January 2014, 00:08:25 UTC | fec: Revert "fec: Do not assume that PHY reset is active low" In order to keep DT compatibility we need to revert this, otherwise the original dts files will no longer work with this driver change. This reverts commit 7a399e3a2e05bc580a78ea72371b3896827f72e1. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 01:24:28 UTC |
| 723a6c7 | David S. Miller | 06 January 2014, 01:23:12 UTC | Merge branch 'bnx2x' Yuval Mintz says: ==================== bnx2x: Bug fixes patch series Most of what this parch series contains is SR-IOV related bug fixes. Additionally, it contains some small fixes for legacy devices/modes. Please consider applying these patches to `net'. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 01:23:12 UTC |
| e8379c7 | Yuval Mintz | 05 January 2014, 16:33:54 UTC | bnx2x: fix VLAN configuration for VFs. If the hypervisor configures a vlan for the VF via the PF, the expected result is that only packets tagged by said vlan will be received by the VF (and that vlan will be silently removed). Due to an incorrect manipulation of vlan filters in the driver, the VF can receive untagged traffic even if the hypervisor configured some vlan for it. This patch corrects the behaviour. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 01:22:33 UTC |
| 9dfef3a | Yuval Mintz | 05 January 2014, 16:33:53 UTC | bnx2x: fix AFEX memory overflow There are 2 different (related) flows in the slowpath configuration that utilize the same pointer and cast it to different structs; This is obviously incorrect as the intended allocated memory is that of the smaller struct, possibly causing the flow utilizing the larger struct to corrupt other slowpath configuration. Since both flows are exclusive, set the allocated memory to be a union of both structs. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 01:22:25 UTC |
| 5b62291 | Michal Kalderon | 05 January 2014, 16:33:52 UTC | bnx2x: Clean before update RSS arrives When a PF receives a VF message indicating a change in RSS properties it should clean the flags' bit-fields; Otherwise, it's possible that some random values will be considered as flags by the lower layers configuring the RSS in FW. Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 01:22:24 UTC |
| 89e18ae | Michal Kalderon | 05 January 2014, 16:33:51 UTC | bnx2x: Correct number of MSI-X vectors for VFs Number of VFs in PCIe configuration space is zero-based. Driver incorrectly sets the number of VFs to be larger by one than what actually is feasible by HW, which might cause later VFs to fail to allocate their MSI-X interrupts. Signed-off-by: Michal Kalderon <michals@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 01:22:24 UTC |
| e848582 | Dmitry Kravkov | 05 January 2014, 16:33:50 UTC | bnx2x: limit number of interrupt vectors for 57711 Original straightforward division may lead to zeroing number of SB and null-pointer dereference when device is short of MSIX vectors or lacks MSIX capabilities. Reported-by: Vladislav Zolotarov <vladz@cloudius-systems.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 06 January 2014, 01:22:24 UTC |
| f0a679a | Linus Torvalds | 06 January 2014, 01:20:45 UTC | Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Another set of small fixes for ARM, covering various areas. Laura fixed a long standing issue with virt_addr_valid() failing to handle holes in memory. Steve found a problem with dcache flushing for compound pages. I fixed another bug in footbridge stuff causing time to tick slowly, and also a problem with the AES code which can cause linker errors. A patch from Rob which fixes Xen problems induced by a lack of consistency in our naming of ioremap_cache() - which thankfully has very few users" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7933/1: rename ioremap_cached to ioremap_cache ARM: fix "bad mode in ... handler" message for undefined instructions CRYPTO: Fix more AES build errors ARM: 7931/1: Correct virt_addr_valid ARM: 7923/1: mm: fix dcache flush logic for compound high pages ARM: fix footbridge clockevent device | 06 January 2014, 01:20:45 UTC |
| c8d1507 | Rafael J. Wysocki | 05 January 2014, 21:57:25 UTC | Merge branches 'acpi-ac' and 'acpi-tpm' * acpi-ac: ACPI / AC: change notification handler type to ACPI_ALL_NOTIFY * acpi-tpm: ACPI / TPM: fix memory leak when walking ACPI namespace | 05 January 2014, 21:57:25 UTC |
| df45c71 | Jiang Liu | 19 December 2013, 12:38:15 UTC | ACPI / TPM: fix memory leak when walking ACPI namespace In function ppi_callback(), memory allocated by acpi_get_name() will get leaked when current device isn't the desired TPM device, so fix the memory leak. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 05 January 2014, 14:54:21 UTC |
| 50a2bc5 | Alexander Mezin | 04 January 2014, 02:07:59 UTC | ACPI / AC: change notification handler type to ACPI_ALL_NOTIFY With kernel 3.13rc5 there are no AC adapter notifications on my laptop. Commit cc8ef5270734 "ACPI / AC: convert ACPI ac driver to platform bus" changed the driver to listen to device notifications only. However, AML code on my laptop notifies the driver with zero event. This patch changes the driver to listen to all events again. Fixes: cc8ef5270734 (ACPI / AC: convert ACPI ac driver to platform bus) References: https://bugzilla.kernel.org/show_bug.cgi?id=67821 Signed-off-by: Alexander Mezin <mezin.alexander@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 05 January 2014, 14:42:42 UTC |
| 0a5ccc8 | Rob Herring | 03 January 2014, 15:17:44 UTC | ARM: 7933/1: rename ioremap_cached to ioremap_cache ioremap_cache is more aligned with other architectures. There are only 2 users of this in the kernel: pxa2xx-flash and Xen. This fixes Xen build failures on arm64: drivers/tty/hvc/hvc_xen.c:233:2: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] drivers/xen/grant-table.c:1174:3: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] drivers/xen/xenbus/xenbus_probe.c:778:4: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 05 January 2014, 14:00:01 UTC |
| 29c350b | Russell King | 03 January 2014, 15:01:39 UTC | ARM: fix "bad mode in ... handler" message for undefined instructions The array was missing the final entry for the undefined instruction exception handler; this commit adds it. Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 05 January 2014, 14:00:00 UTC |
