| 1c89fe3 | David Henningsson | 12 December 2011, 06:01:17 UTC | ALSA: HDA: Set position fix to LPIB for an Atom/Poulsbo based device For the Asus 1101HA, reporting position by reading the DMA position buffer map seems unstable and often wrong. The reporter says that position_fix=LPIB works much better (although not 100%, but this is probably due to other issues). The controller chip is an Intel Poulsbo 8086:811b (rev 07) controller, and complete alsa-info is available here: https://launchpadlibrarian.net/86691768/alsa-info.txt.1TNwyE5Ea7 Cc: stable@kernel.org (3.0+) BugLink: http://bugs.launchpad.net/bugs/825709 Tested-by: Stefano Lodi Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 December 2011, 09:41:36 UTC |
| 0a34b42 | Takashi Iwai | 07 December 2011, 16:20:30 UTC | ALSA: hda/realtek - Fix lost speaker volume controls When there are the same or more number of HP pins are available, HP pins are used as the primary outputs instead of the speaker pins. But, in some cases (especially with ALC663 & co), some DACs are available only with a later pin and it's assigned to a speaker, and since the driver parses the pins from the lower NID, such a DAC was skipped eventually without assignments. This resulted in a regression, the missing speaker volume control in the new parser. As a workaround for this, now the driver retries the pin->DAC mapping again after restoring the speaker-pins as primary. This is still an ad hoc fix, but it works so far for most of Realtek codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 December 2011, 16:32:24 UTC |
| fbabc24 | Takashi Iwai | 07 December 2011, 16:14:20 UTC | ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins On systems with two speaker pins, the secondary speaker pin is mostly assigned to a bass speaker instead of a surround. Thus it makes more sense to rename the control properly. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 December 2011, 16:32:24 UTC |
| 766ddee | Takashi Iwai | 07 December 2011, 15:55:19 UTC | ALSA: hda/realtek - Don't create extra controls with channel suffix The multiple headphone or speaker pins are usually provided to output the same stream unlike line-out jacks (which are supposed to be multi-channel surrounds). Thus giving a mixer name like "Headphone Surround" is rather confusing. Instead, when multiple headphone volumes are available, use index with the same "Headphone" name. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 December 2011, 16:32:24 UTC |
| 6c39d6a | Takashi Iwai | 06 December 2011, 12:22:28 UTC | Merge branch 'fix/asoc' into for-linus | 06 December 2011, 12:22:28 UTC |
| a020428 | Takashi Iwai | 06 December 2011, 12:17:23 UTC | ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes Signed-off-by: Takashi Iwai <tiwai@suse.de> | 06 December 2011, 12:21:43 UTC |
| b521287 | Takashi Iwai | 06 December 2011, 12:19:25 UTC | Merge branch 'fix/hda-idt-fix' into fix/hda | 06 December 2011, 12:19:25 UTC |
| f1a7374 | Takashi Iwai | 04 December 2011, 12:44:06 UTC | ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs Some HP laptops with IDT 92HD75 codecs may use a GPIO > 4 for the mute LED, but currently the driver doesn't check this properly, and confuses the mute LED behavior. This ended up with the silent output on some HP laptops due to having another GPIO used as external amp control. This patch fixes the problem by checking the max GPIO count and comparing with the given value from DMI entry instead of magic fixed value 4 and 8, and adding a new field to indicate the VREF mute-LED behavior. Reported-and-tested-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Cc: <stable@kernel.org> [v3.1] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 06 December 2011, 12:18:46 UTC |
| cefcc03 | Mark Brown | 05 December 2011, 20:50:45 UTC | ASoC: Provide a more complete DMA driver stub Allow userspace applications to do more parameter setting by providing a more complete stub DMA driver specifying a wildcard set of formats and channels and essentially random values for the DMA parameters. This is required for useful runtime operation of the dummy DMA driver until we are able to figure out how to power up links and do hw_params() from DAPM. Sending to stable as without this the dummy driver is not terribly useful. Reported-by: Kyung-Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.com> Tested-by: Kyung-Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 06 December 2011, 10:05:07 UTC |
| 145294c | Mark Brown | 05 December 2011, 18:27:25 UTC | ASoC: Remove references to corgi and spitz from machine driver document They're not currently actively worked on, the hardware being rather obsolete by now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 05 December 2011, 19:29:54 UTC |
| 570a242 | Axel Lin | 04 December 2011, 08:11:16 UTC | ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C SND_SOC_MX27VIS_AIC32X4 selects SND_SOC_TLV320AIC32X4, but SND_SOC_TLV320AIC32X4 needs CONFIG_I2C. So we need to make SND_SOC_MX27VIS_AIC32X4 depend on I2C. otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/tlv320aic32x4.o sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_read': sound/soc/codecs/tlv320aic32x4.c:323: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_probe': sound/soc/codecs/tlv320aic32x4.c:641: error: 'i2c_master_send' undeclared (first use in this function) sound/soc/codecs/tlv320aic32x4.c:641: error: (Each undeclared identifier is reported only once sound/soc/codecs/tlv320aic32x4.c:641: error: for each function it appears in.) sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_modinit': sound/soc/codecs/tlv320aic32x4.c:763: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_exit': sound/soc/codecs/tlv320aic32x4.c:774: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/tlv320aic32x4.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 04 December 2011, 23:47:16 UTC |
| b971c37 | Axel Lin | 04 December 2011, 08:30:18 UTC | ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700 SND_SOC_RAUMFELD selects SND_SOC_CS4270 which needs CONFIG_I2C, and also selects SND_SOC_AK4104 which needs SPI_MASTER. Thus make SND_SOC_RAUMFELD depend on I2C && SPI_MASTER. Add depend on SPI_MASTER to fix below build error if CONFIG_SPI_MASTER is not selected. LD .tmp_vmlinux1 sound/built-in.o: In function `ak4104_spi_write': last.c:(.text+0x290cc): undefined reference to `spi_sync' sound/built-in.o: In function `ak4104_probe': last.c:(.text+0x292a0): undefined reference to `spi_write_then_read' sound/built-in.o: In function `ak4104_spi_probe': last.c:(.text+0x29398): undefined reference to `spi_setup' sound/built-in.o: In function `ak4104_init': last.c:(.init.text+0x4ec): undefined reference to `spi_register_driver' make: *** [.tmp_vmlinux1] Error 1 Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/cs4270.o sound/soc/codecs/cs4270.c: In function 'cs4270_i2c_probe': sound/soc/codecs/cs4270.c:657: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/cs4270.c: In function 'cs4270_init': sound/soc/codecs/cs4270.c:730: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/cs4270.c: In function 'cs4270_exit': sound/soc/codecs/cs4270.c:736: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/cs4270.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 SND_PXA2XX_SOC_HX4700 selects SND_SOC_AK4641 which needs CONFIG_I2C. Thus make SND_PXA2XX_SOC_HX4700 depend on I2C. Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/ak4641.o sound/soc/codecs/ak4641.c: In function 'ak4641_modinit': sound/soc/codecs/ak4641.c:646: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/ak4641.c: In function 'ak4641_exit': sound/soc/codecs/ak4641.c:656: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/ak4641.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 04 December 2011, 23:47:16 UTC |
| ef14977 | Axel Lin | 04 December 2011, 11:35:20 UTC | ASoC: uda1380: Return proper error in uda1380_modinit failure path Return proper error for uda1380_modinit if i2c_add_driver() fails. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 04 December 2011, 23:47:15 UTC |
| 36d54dc | Axel Lin | 03 December 2011, 10:38:25 UTC | ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C SND_KIRKWOOD_SOC_T5325 selects SND_SOC_ALC5623, but SND_SOC_ALC5623 needs CONFIG_I2C. So we need to make SND_KIRKWOOD_SOC_T5325 depend on I2C, otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/alc5623.o sound/soc/codecs/alc5623.c: In function 'alc5623_i2c_probe': sound/soc/codecs/alc5623.c:1002: error: implicit declaration of function 'i2c_smbus_read_word_data' sound/soc/codecs/alc5623.c:1009: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/alc5623.c: In function 'alc5623_modinit': sound/soc/codecs/alc5623.c:1096: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/alc5623.c: In function 'alc5623_modexit': sound/soc/codecs/alc5623.c:1108: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/alc5623.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Also fix the same issue for SND_KIRKWOOD_SOC_OPENRD. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 03 December 2011, 10:56:47 UTC |
| 87b86ad | Mark Brown | 14 August 2011, 04:39:20 UTC | ASoC: Mark WM8994 ADC muxes as virtual Since they don't actually have power bits but do have events associated with them it's important that we bootstrap their state properly which making them virtual does. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 02 December 2011, 17:44:37 UTC |
| cce4aa3 | Takashi Iwai | 02 December 2011, 14:29:12 UTC | ALSA: hda/realtek - Fix Oops in alc_mux_select() When no imux is available (e.g. a single capture source), alc_auto_init_input_src() may trigger an Oops due to the access to -1. Add a proper zero-check to avoid it. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 02 December 2011, 14:29:12 UTC |
| fc084e0 | David Dillow | 02 December 2011, 04:26:53 UTC | ALSA: sis7019 - give slow codecs more time to reset There are some AC97 codec and board combinations that have been observed to take a very long time to respond after the cold reset has completed. In one case, more than 350 ms was required. To allow users to have sound on those platforms, we'll wait up to 500ms for the codec to become ready. As a board may have multiple codecs, with some faster than others to reset, we add a module parameter to inform the driver which codecs should be present. Reported-by: KotCzarny <tjosko@yahoo.com> Signed-off-by: David Dillow <dave@thedillows.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 02 December 2011, 09:43:06 UTC |
| cf54d47 | Takashi Iwai | 01 December 2011, 15:32:18 UTC | Merge branch 'fix/asoc' into for-linus | 01 December 2011, 15:32:18 UTC |
| 88d6860 | Charles Chin | 01 December 2011, 10:21:00 UTC | ALSA: hda - Fix S3/S4 problem on machines with VREF-pin mute-LED The verb command in stac92xx_post_suspend caused the audio to stop working after resuming from S3 mode on HP laptops with the VREF-pin mute-LED control. Removing relevant post_suspend registering. Although removing D3 on AFG is no optimal solution, the impact should be small in comparison with the broken S3/S4. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 01 December 2011, 10:27:43 UTC |
| 4f8b6c7 | Marc Vertes | 29 November 2011, 11:21:17 UTC | ALSA: hda_intel - revert a quirk that affect VIA chipsets This quirk sould be reverted. It has the following probems: 1) The quirk was intended to "ASUS MV2-MX SE" motherboards only, but the ID used matches a much broader range, potentially all boards containing a VIA chipset model in the family of vendor VIA 0x1106 and audio device ID 0x3288, which encompasses VIA-VT82xx, VIA-VT1xx and VIA-VT20xx chipsets. 2) VIA chipsets rely on azx_via_get_position() to handle correctly dma transfers during capture. Using POS_FIX_LPIB instead of POS_FIX_VIACOMBO leads to partially corrupted input buffers during capture. The effects of this bug are not immediately visible, it took strong DSP expertise, some expensive signal generator and a spectrum analyzer to identify it and verify correct behaviour using original default. 3) It's almost certain that the quirk did not fix the real problem, if there was one. Refer to original submission: http://mailman.alsa-project.org/pipermail/alsa-devel/2010-February/025109.html Signed-of-by: Marc Vertes <mvertes@sigfox.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 November 2011, 12:04:03 UTC |
| 542c9a0 | Takashi Iwai | 29 November 2011, 12:01:30 UTC | ALSA: hda - Avoid touching mute-VREF pin for IDT codecs Some HP laptops use a pin VREF for controlling the mute LED, and such a pin shouldn't be powered off. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 November 2011, 12:01:30 UTC |
| bda6358 | Lars-Peter Clausen | 28 November 2011, 08:44:16 UTC | firmware: Sigma: Fix endianess issues Currently the SigmaDSP firmware loader only works correctly on little-endian systems. Fix this by using the proper endianess conversion functions. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 29 November 2011, 11:59:50 UTC |
| c56935b | Lars-Peter Clausen | 28 November 2011, 08:44:15 UTC | firmware: Sigma: Skip header during CRC generation The firmware header is not part of the CRC, so skip it. Otherwise the firmware will be rejected due to non-matching CRCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 29 November 2011, 11:59:44 UTC |
| 4f718a2 | Lars-Peter Clausen | 28 November 2011, 08:44:14 UTC | firmware: Sigma: Prevent out of bounds memory access The SigmaDSP firmware loader currently does not perform enough boundary size checks when processing the firmware. As a result it is possible that a malformed firmware can cause an out of bounds memory access. This patch adds checks which ensure that both the action header and the payload are completely inside the firmware data boundaries before processing them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 29 November 2011, 11:53:53 UTC |
| ae7cc70 | John F Leach | 29 November 2011, 00:41:27 UTC | ALSA: usb-audio - Support for Roland GAIA SH-01 Synthesizer Added table quirks entry for Roland GAIA SH-01 Synthesizer based upon Roland SH-201 table entry as template. USB MIDI and audio was tested with Muse and Audacity. Signed-off-by: John F Leach <jfleach@jfleach.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 November 2011, 07:23:15 UTC |
| fc8e6e8 | Mark Brown | 28 November 2011, 18:48:46 UTC | ASoC: Supply dcs_codes for newer WM1811 revisions Based on initial data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 28 November 2011, 23:18:38 UTC |
| fc07ecd | Mark Brown | 28 November 2011, 21:16:56 UTC | ASoC: Error out if we can't generate a LRCLK at all for WM8994 Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 28 November 2011, 22:10:05 UTC |
| f339240 | Takashi Iwai | 27 November 2011, 16:59:07 UTC | Merge branch 'fix/hda' into for-linus | 27 November 2011, 16:59:07 UTC |
| 187d333 | Takashi Iwai | 24 November 2011, 15:33:09 UTC | ALSA: hda - Fix jack-detection control of VT1708 VT1708 has no support for unsolicited events per jack-plug, the driver implements the workq for polling the jack-detection. The mixer element "Jack Detect" was supposed to control this behavior on/off, but this doesn't work properly as is now. The workq is always started and the HP automute is always enabled. This patch fixes the jack-detect control behavior by triggering / stopping the work appropriately at the state change. Also the work checks the internal state to continue scheduling or not. Cc: <stable@kernel.org> [v3.1] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 27 November 2011, 16:56:17 UTC |
| 92bb43e | Dan Carpenter | 24 November 2011, 11:48:24 UTC | ALSA: hda - cut and paste typo in cs420x_models[] The CS420X_IMAC27 was copied from the line before but CS420X_APPLE was clearly intented. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 27 November 2011, 16:56:07 UTC |
| 5b895ee | Mark Brown | 27 November 2011, 15:54:49 UTC | ASoC: Correct name of Speyside Main Speaker widget Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 27 November 2011, 16:03:51 UTC |
| 77088cc | Takashi Iwai | 23 November 2011, 16:07:16 UTC | Merge branch 'fix/asoc' into for-linus | 23 November 2011, 16:07:16 UTC |
| 5ff1ddf | Eric Miao | 23 November 2011, 14:37:00 UTC | ASoC: skip resume of soc-audio devices without codecs There are cases where there is no working codec on the soc-audio devices, and snd_soc_suspend() will skip such device when suspending. Yet its counterpart snd_soc_resume() does not check this, causing complaints about spinlock lockup: [ 176.726087] BUG: spinlock lockup on CPU#0, kworker/0:2/1067, d8ab82a8 [ 176.732539] [<80014a14>] (unwind_backtrace+0x0/0xec) from [<805b3fc8>] (dump_stack+0x20/0x24) [ 176.741082] [<805b3fc8>] (dump_stack+0x20/0x24) from [<80322208>] (do_raw_spin_lock+0x118/0x158) [ 176.749882] [<80322208>] (do_raw_spin_lock+0x118/0x158) from [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) [ 176.759723] [<805b7874>] (_raw_spin_lock_irqsave+0x5c/0x68) from [<8002a020>] (__wake_up+0x2c/0x5c) [ 176.768781] [<8002a020>] (__wake_up+0x2c/0x5c) from [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) [ 176.777666] [<804a6de8>] (soc_resume_deferred+0x3c/0x2b0) from [<8004ee20>] (process_one_work+0x2e8/0x50c) [ 176.787334] [<8004ee20>] (process_one_work+0x2e8/0x50c) from [<8004fd08>] (worker_thread+0x1c8/0x2e0) [ 176.796566] [<8004fd08>] (worker_thread+0x1c8/0x2e0) from [<80053ec8>] (kthread+0xa4/0xb0) [ 176.804843] [<80053ec8>] (kthread+0xa4/0xb0) from [<8000ea70>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 23 November 2011, 14:56:36 UTC |
| b284362 | Axel Lin | 23 November 2011, 04:46:11 UTC | ASoC: cs42l51: Fix off-by-one for reg_cache_size Just checking the code in cs42l51_fill_cache(): The cache pointer points to codec->reg_cache + 1. I think it is because CS42L51_FIRSTREG is 0x01, so codec->reg_cache[0] is not used here. Then we read CS42L51_NUMREGS bytes to cache. So we need reg_cache_size to be CS42L51_NUMREGS + 1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 23 November 2011, 11:34:21 UTC |
| 4ca8af5 | Paul Bolle | 23 November 2011, 09:39:10 UTC | ASoC: drop support for PlayPaq with WM8510 SoC Audio support for PlayPaq with WM8510 got added in commit 9aaca9683b ("[ALSA] Revised AT32 ASoC Patch"). That support depends on BOARD_PLAYPAQ. That Kconfig symbol didn't exist when that support got added in v2.6.27. It still doesn't. It has never been possible to even build this driver. Drop it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 23 November 2011, 10:28:38 UTC |
| 6107159 | Takashi Iwai | 23 November 2011, 06:52:15 UTC | ALSA: hda/realtek - Minor cleanup Use an inline function for the common pattern for assigning a capsrc. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 23 November 2011, 06:52:15 UTC |
| 6759dc3 | Takashi Iwai | 23 November 2011, 06:38:59 UTC | ALSA: hda/realtek - Fix missing inits of item indices for auto-mic When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(), the initialization of index field is missing. It may work without it casually when the original imux was created by the auto-parser, but it's definitely broken in the case of static configs where no imux was parsed beforehand. Because of this, the auto-mic switching doesn't work properly on some model options. This patch adds the missing initialization of index field. Reported-by: Dmitry Nezhevenko <dion@inhex.net> Cc: <stable@kernel.org> [v3.1] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 23 November 2011, 06:45:21 UTC |
| 6dfeb70 | Takashi Iwai | 22 November 2011, 19:00:31 UTC | ALSA: hda - Fix invalid pin and GPIO for Apple laptops with CS codecs The PCI SSID 8086:7270 is commonly used for multiple Apple machines, thus we can't use it as identifier for a unique model. Because of this conflict, some machines show weird behavior. For example, MacBook Air shows Front and Surround speakers although only Surround works due to the wrongly overridden pin-configuration for imac27. This patch fixes two things: - Stop the wrong pin-config override of imac27 by removing PCI SSID entry for avoiding the wrong mappings, - Add the generic GPIO setup for Apple machines by checking the codec SSID vendor bits Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 23 November 2011, 06:31:49 UTC |
| e2301a4 | Takashi Iwai | 22 November 2011, 18:58:56 UTC | ALSA: hda - Check subdevice mask in snd_hda_check_board_codec_sid_config() In snd_hda_check_board_codec_sid_config(), not only comparing with the exact value but allow the bit-mask comparison for vendor-only, etc. Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 23 November 2011, 06:31:36 UTC |
| 380c883 | Timur Tabi | 22 November 2011, 20:38:59 UTC | ASoC: mpc8610: tell the CS4270 codec that it's the master Commit ac601555 ("ASoC: Return early with -EINVAL if invalid dai format is detected") requires the machine driver to tell the CS4270 codec driver whether the CS4270 should be configured for master or slave operation. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 22 November 2011, 23:06:25 UTC |
| d66b853 | Daniel Mack | 22 November 2011, 16:17:23 UTC | ASoC: cs4720: use snd_soc_cache_sync() Replace the manual register restore mechanism in cs4270.c and call the generic snd_soc_cache_sync() handler instead. This factors code out in favour of core facilities and also fixes a bus confusion that is most probably caused by intermixing i2c-regmap functions and i2c_smbus_* accessors. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 22 November 2011, 23:06:07 UTC |
| 3d94a2a | Boojin Kim | 22 November 2011, 02:03:22 UTC | ASoC: SAMSUNG: Fix build error This patch adds <linux/modules.h> to fix following build errors. sound/soc/codecs/wm8994.c: In function 'wm8994_readable': sound/soc/codecs/wm8994.c:58: warning: unused variable 'wm8994' sound/soc/samsung/smdk_wm8994.c:176: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk_wm8994.c:176: warning: data definition has no type or storage class sound/soc/samsung/smdk_wm8994.c:176: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' sound/soc/samsung/smdk_wm8994.c:176: warning: function declaration isn't a prototype sound/soc/samsung/smdk_wm8994.c:177: error: expected declaration specifiers or '...' before string constant Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 22 November 2011, 19:40:29 UTC |
| 5c4b2aa | Axel Lin | 22 November 2011, 06:47:44 UTC | ASoC: max9877: Update register if either val or val2 is changed In the case of ((max9877_regs[reg] >> shift) & mask) != val but ((max9877_regs[reg2] >> shift) & mask) == val2, current code does not update the registers. Fix the logic to update registers if either val or val2 is changed. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 22 November 2011, 13:06:21 UTC |
| 72531c9 | Axel Lin | 22 November 2011, 01:46:51 UTC | ASoC: Fix wrong define for AD1836_ADC_WORD_OFFSET According to the datasheet: The BIT[5:4] of ADC Control Register 2 is to control the word width. 00 = 25 Bits 01 = 20 Bits 10 = 16 Bits 11 = Invalid Thus, the AD1836_ADC_WORD_OFFSET should be defined as 4. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org | 22 November 2011, 13:06:14 UTC |
| a370fc6 | Wu Fengguang | 22 November 2011, 08:46:23 UTC | ALSA: hda - fail ELD reading early With the ELD repoll mechanism, we can (and should) fail the ELD reading immediately when find something obviously wrong and let the caller retry after some delay. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 November 2011, 11:09:45 UTC |
| a298785 | Tim Blechmann | 22 November 2011, 10:15:45 UTC | ALSA: lx6464es - fix device communication via command bus commit 6175ddf06b6172046a329e3abfd9c901a43efd2e optimized the mem*io functions that have been used to send commands to the device. these optimizations somehow corrupted the communication with the lx6464es, that resulted the device to be unusable with kernels after 2.6.33. this patch emulates the memcpy_*_io functions via a loop to avoid these problems. Signed-off-by: Tim Blechmann <tim@klingt.org> LKML-Reference: <4ECB5257.4040600@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 November 2011, 10:53:11 UTC |
| afd00d7 | Tim Blechmann | 22 November 2011, 10:15:44 UTC | ALSA: lx6464es - command buffer API cleanup the command buffer is only accessed from one file, so we can declare the specific functions as static in that file Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 November 2011, 10:52:53 UTC |
| c6e8453 | Wu Fengguang | 18 November 2011, 22:59:32 UTC | ALSA: hda - repoll ELD content for multiple times Improve the one-shot ELD repoll to up to 6 retries. Up to now the 300ms looks sufficient for the test boxes. However I'm a bit worried about how well it can fit the wider user base. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 November 2011, 10:35:58 UTC |
| 05c7cc9 | Adrian Knoth | 21 November 2011, 15:15:36 UTC | ALSA: hdspm - Fix PCI ID for PCIe RME MADI cards Commit c09403dcc5698abf214329fbbf3cf8dbb5558bea has introduced a regression: PCIe versions of RME MADI were no longer detected, because the MADIface ID (0xd5) was used instead of the correct 0xd2. This commit fixes the problem. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 November 2011, 07:34:36 UTC |
| ed3e80c | Mark Brown | 21 November 2011, 11:55:41 UTC | ASoC: Ensure WM8731 register cache is synced when resuming from disabled Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org | 21 November 2011, 16:58:46 UTC |
| 1d9a91d | Mark Brown | 21 November 2011, 11:28:11 UTC | Merge branch 'DB_RANGE-size-fixes' of git://git.alsa-project.org/alsa-kprivate into for-3.2 | 21 November 2011, 11:28:11 UTC |
| 27533df | Dan Carpenter | 20 November 2011, 20:57:49 UTC | ALSA: cs5535 - Fix an endianness conversion desc->size is supposed to be a le16 type. On a big endian system the current code will set ->size to zero. We fixed a similar bug on the next line but missed this one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 21 November 2011, 11:03:55 UTC |
| ef0cd47 | Axel Lin | 19 November 2011, 06:41:07 UTC | ASoC: cs4271: Fix wrong mask parameter in some snd_soc_update_bits calls Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alexander Sverdlin <subaparts@yandex.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 20 November 2011, 20:58:21 UTC |
| 028aa63 | Clemens Ladisch | 20 November 2011, 14:15:31 UTC | ASoC: wm_hubs: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 20 November 2011, 14:46:52 UTC |
| a1320fe | Clemens Ladisch | 20 November 2011, 14:14:55 UTC | ASoC: wm9090: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the arrays. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 20 November 2011, 14:46:51 UTC |
| dac678f | Clemens Ladisch | 20 November 2011, 14:14:11 UTC | ASoC: wm8993: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 20 November 2011, 14:46:51 UTC |
| 43e9dc7 | Clemens Ladisch | 20 November 2011, 14:13:27 UTC | ASoC: wm8962: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the arrays. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 20 November 2011, 14:46:50 UTC |
| 740fb9d | Clemens Ladisch | 20 November 2011, 14:12:26 UTC | ASoC: sgtl5000: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 20 November 2011, 14:46:50 UTC |
| a19ea0b | Clemens Ladisch | 20 November 2011, 14:11:54 UTC | ASoC: rt5631: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent the last entry from being omitted. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 20 November 2011, 14:46:25 UTC |
| 0aed4a9 | Clemens Ladisch | 20 November 2011, 14:10:27 UTC | ASoC: adau1373: fix DB_RANGE size Give the correct number of entries to TLV_DB_RANGE_HEAD to prevent reading more data than actually is in the array. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> | 20 November 2011, 14:46:24 UTC |
| dbd1b54 | Takashi Iwai | 19 November 2011, 10:41:30 UTC | ALSA: hda - Add pin fix for Alienware M17x R3 Reported-by: Albert Pool <albertpool@solcon.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 November 2011, 10:41:30 UTC |
| 2391a0e | Timo Juhani Lindfors | 17 November 2011, 00:52:50 UTC | ASoC: wm8753: Skip noop reconfiguration of DAI mode This patch makes it possible to set DAI mode to its currently applied value even if codec is active. This is necessary to allow aplay -t raw -r 44100 -f S16_LE -c 2 < /dev/urandom & alsactl store -f backup.state alsactl restore -f backup.state to work without returning errors. This patch is based on a patch sent by Klaus Kurzmann <mok@fluxnetz.de>. Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org | 17 November 2011, 16:48:25 UTC |
| 05ee796 | Takashi Iwai | 16 November 2011, 17:05:11 UTC | ALSA: hda - Fix the connection selection of ADCs on Cirrus codecs spec->cur_adc isn't set until cs_capture_pcm_prepare() is called although the driver tries to select the connection at init time and at auto-mic switch. This results in the access to the widget NID 0, which is obviously invalid, also a wrong capture source. This patch fixes the issue by issuing the connect-select verb conditionally at appropriate places. Reported-and-tested-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 November 2011, 17:05:11 UTC |
| 25d7d59 | Takashi Iwai | 16 November 2011, 09:52:01 UTC | ALSA: hda - Update URLs in document Some stuff was moved from kernel.org to other places. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 November 2011, 09:53:38 UTC |
| 2d1b439 | Wu Fengguang | 16 November 2011, 08:29:48 UTC | ALSA: hda - move eld->spk_alloc fixup to hdmi_update_eld() It looks more natural and saves two lines of code. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 November 2011, 09:44:58 UTC |
| 744626d | Wu Fengguang | 16 November 2011, 08:29:47 UTC | ALSA: hda - delayed ELD repoll The Intel HDMI chips (ironlake at least) are found to have ~250ms delay between the ELD_Valid=1 hotplug event is send and the ELD buffer becomes actually readable. During the time the ELD buffer is mysteriously all 0. Fix it by scheduling a delayed work to re-read ELD buffer after 300ms. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 November 2011, 09:44:42 UTC |
| b95d68b | Wu Fengguang | 16 November 2011, 08:29:46 UTC | ALSA: hda - fix ELD memory leak memset(eld) clears eld->proc_entry which will leak the struct snd_info_entry when unloading module. Fix it by - memset only the fields before eld->eld_buffer - set eld->eld_valid to true _after_ all eld fields have been filled Cc: <stable@kernel.org> Cc: Pierre-louis Bossart <pierre-louis.bossart@intel.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 16 November 2011, 09:44:21 UTC |
| 0f768a7 | Timur Tabi | 14 November 2011, 22:35:26 UTC | ASoC: fsl_ssi: properly initialize the sysfs attribute object Commit 6992f533 ("sysfs: Use one lockdep class per sysfs attribute") requires 'struct attribute' objects to be initialized with sysfs_attr_init(). Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 15 November 2011, 11:59:09 UTC |
| 54dc6ca | Johannes Stezenbach | 14 November 2011, 16:23:16 UTC | ASoC: sta32x: preserve coefficient RAM The coefficient RAM must be saved in a shadow so it can be restored when the codec is powered on using regulator_bulk_enable(). Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org | 14 November 2011, 21:32:12 UTC |
| e53de8f | Jesper Juhl | 13 November 2011, 22:11:50 UTC | ALSA: hda/realtek: remove redundant semicolon Having just one semicolon after a break statement is enough. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 November 2011, 09:41:46 UTC |
| afef2cf | Charles Chin | 11 November 2011, 07:05:28 UTC | ALSA: hda - pwr_nids cleanup for IDT codecs Clean up and fix pwr_nids for 92HD71 / 73 / 83 family codecs; remove pwr_mapping which was incorrect. The original pwr_nids support of 92HD83xxx was incorrect and never actually worked before. Now we should have things working correctly without having to hack by DID anymore. It is also not necessary to explicitly turn on all the pins near the beginning of patch_stac92hd83xxx() now, the pins will go though initialization properly. Tested on 92HD66 / 71 / 73 / 75 / 83 / 89 / 91 demo boards. Signed-off-by: Charles Chin <Charles.Chin@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 11 November 2011, 07:05:28 UTC |
| d938e66 | Takashi Iwai | 10 November 2011, 18:52:08 UTC | Merge branch 'fix/misc' into for-linus | 10 November 2011, 18:52:08 UTC |
| 43df2a5 | Thomas Meyer | 10 November 2011, 18:38:43 UTC | ALSA: usb-audio: Use kmemdup rather than duplicating its implementation Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 10 November 2011, 18:51:45 UTC |
| 98d9701 | Jassi Brar | 10 November 2011, 11:49:07 UTC | MAINTAINERS: Drop inactive Samsung ASoC maintainer Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 10 November 2011, 12:11:59 UTC |
| 2f451d2 | Takashi Iwai | 10 November 2011, 11:36:46 UTC | ALSA: hda - Re-enable the check NO_PRESENCE misc bit We disabled the check of NO_PRESENCE bit of the default pin-config in commit f4419172 temporarily. One problem was that the first implementation was wrong -- the bit after the shift must be checked. However, this would still give many regressions on machines with broken BIOS. They set this bit wrongly even on active pins. A workaround is to check whether all pins contain this bit. As far as I've checked, broken BIOSen set this bit on all pins, no matter whether active or not. In such a case, the driver should ignore this bit check. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 10 November 2011, 11:36:46 UTC |
| 9e226b4 | Takashi Iwai | 10 November 2011, 11:34:24 UTC | ALSA: vmaster - Free slave-links when freeing the master element When freeing the vmaster master element, we should release slave-links properly, not only assumig that slaves will be freed soon later. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 10 November 2011, 11:34:24 UTC |
| aeb4b88 | Takashi Iwai | 10 November 2011, 11:28:38 UTC | ALSA: hda - Don't add elements of other codecs to vmaster slave When a virtual mater control is created, the driver looks for slave elements from the assigned card instance. But this may include the elements of other codecs when multiple codecs are on the same HD-audio bus. This works at the first time, but it'll give Oops when it's once freed and re-created via reconfig sysfs. This patch changes the element-look-up strategy to limit only to the mixer elements of the same codec. Reported-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 10 November 2011, 11:32:08 UTC |
| 7fb4f39 | Konstantin Ozerkov | 09 November 2011, 15:28:55 UTC | ALSA: intel8x0: improve virtual environment detection Detection code improved by PCI SSID usage. VM optimization now enabled only for known devcices (skip host devices forwarded to VM by VT-d or same kind of technology). For debug/troubleshooting purposes optimization can be forced (on/off) by module parameter: "inside_vm" (boolean). Known devices (PCI SSID): 1af4:1100: Reserved for KVM devices. Note this is not yet implemented for KVM's ICH/AC'97 emulation. 1ab8:xxxx: Parallels ICH/AC'97 emulated sound. [ fixed a minor coding-style issue by tiwai] Signed-off-by: Konstantin Ozerkov <kozerkov@parallels.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 09 November 2011, 17:34:28 UTC |
| 65c397d | Konstantin Ozerkov | 09 November 2011, 15:28:54 UTC | ALSA: intel8x0: move virtual environment detection code into one place This is refactoring patch: preparation for add improved detection code. Now all detection code placed in one place. Signed-off-by: Konstantin Ozerkov <kozerkov@parallels.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 09 November 2011, 17:33:07 UTC |
| 55c0008 | Alexey Fisher | 09 November 2011, 10:39:24 UTC | ALSA: snd_usb_audio: add Logitech HD Webcam c510 to quirk-384 Logitech HD Webcam c510 provide wrong mixer resolution. Add it to "res = 384" quirk. Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 09 November 2011, 11:22:38 UTC |
| f7f9bdf | Julian Wollrath | 09 November 2011, 09:02:40 UTC | ALSA: hda - fix internal mic on Dell Vostro 3500 laptop Fix the not working internal mic on Dell Vostro 3500 laptop by introducing the new model dell-vostro-3500. Signed-off-by: Julian Wollrath <jwollrath@web.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 09 November 2011, 10:03:29 UTC |
| bcca5fa | Takashi Iwai | 09 November 2011, 07:52:22 UTC | Merge branch 'fix/asoc' into for-linus | 09 November 2011, 07:52:22 UTC |
| 8d1c963 | David Henningsson | 08 November 2011, 19:37:26 UTC | ALSA: HDA: Remove quirk for Toshiba T110 According to the bug reporter, model=auto is needed to make the internal microphone work. BugLink: https://bugs.launchpad.net/bugs/819699 Reported-by: Andrej (agno01) Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 09 November 2011, 07:51:28 UTC |
| dcaaf9f | Takashi Iwai | 08 November 2011, 16:50:27 UTC | ALSA: usb-audio - Fix the missing volume quirks at delayed init In the recent usb-audio driver, the initialization of volume ranges may be delayed when the device doesn't respond well at the probing time. But the volume quirks for certain devices are applied only in mixer_ctl_feature_info() thus only at the very first probe and will be missing when the volume range is initialized later. This patch moves the volume quirk code to be always called from the volume-range extraction (get_min_max()), so that the quirks are properly applied in the later init time. Reported-and-tested-by: Alexey Fisher <bug-track@fisher-privat.net> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 November 2011, 16:50:27 UTC |
| adf4636 | Axel Lin | 05 November 2011, 06:49:21 UTC | ASoC: wm9081: Don't write WM9081_BIAS_ENA bit to WM9081_VMID_CONTROL register WM9081_BIAS_ENA is the bit[1] of WM9081_BIAS_CONTROL_1 register (05h). Current code incorrectly write it to WM9081_VMID_CONTROL(04h) register. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 08 November 2011, 15:39:36 UTC |
| f1e1035 | Axel Lin | 05 November 2011, 06:47:19 UTC | ASoC: wm9081: Fix reading wrong register for setting VMID 2*240k VMID Divider Enable and Select is controlled by BIT[2:1] of WM9081_VMID_CONTROL register (04h). Current code reads wrong register (WM9081_BIAS_CONTROL_1) for setting VMID 2*240k. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 08 November 2011, 15:39:32 UTC |
| 1dd6c07 | Mark Brown | 08 November 2011, 10:37:41 UTC | Merge branch 'for-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-3.2 | 08 November 2011, 10:37:41 UTC |
| dccc181 | Takashi Iwai | 08 November 2011, 06:52:19 UTC | ALSA: hda - Mute unused capture sources for Realtek codecs When a Realtek codec has a matrix-style capture-source selection, we need to scan all connections instead of only imux items. Otherwise some input might be kept unmuted. Although the corresponding input must be dead so there should be no input from it, it's still safer to mute the route completely. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 November 2011, 06:52:19 UTC |
| 5a9a517 | Denis V. Lunev | 07 November 2011, 16:33:25 UTC | ALSA: intel8x0: Improve comments for VM optimization The recently merged 228cf79376f1 looks a bit hackish while it is not. The change was quite simple. In a virtualized environment the patch unhacks old kludge introduced for old broken AC97 hardware. This patch adds proper comment to "unkludge" code. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Konstantin Ozerkov <kozerkov@parallels.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 November 2011, 06:51:21 UTC |
| 1ea6b8f | Linus Torvalds | 08 November 2011, 00:16:02 UTC | Linux 3.2-rc1 .. with new name. Because nothing says "really solid kernel release" like naming it after an extinct animal that just happened to be in the news lately. | 08 November 2011, 00:16:02 UTC |
| 075cb10 | Linus Torvalds | 08 November 2011, 00:14:26 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ... | 08 November 2011, 00:14:26 UTC |
| a3fbbde | Al Viro | 07 November 2011, 21:21:26 UTC | VFS: we need to set LOOKUP_JUMPED on mountpoint crossing Mountpoint crossing is similar to following procfs symlinks - we do not get ->d_revalidate() called for dentry we have arrived at, with unpleasant consequences for NFS4. Simple way to reproduce the problem in mainline: cat >/tmp/a.c <<'EOF' #include <unistd.h> #include <fcntl.h> #include <stdio.h> main() { struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1}; if (fcntl(0, F_SETLK, &fl)) perror("setlk"); } EOF cc /tmp/a.c -o /tmp/test then on nfs4: mount --bind file1 file2 /tmp/test < file1 # ok /tmp/test < file2 # spews "setlk: No locks available"... What happens is the missing call of ->d_revalidate() after mountpoint crossing and that's where NFS4 would issue OPEN request to server. The fix is simple - treat mountpoint crossing the same way we deal with following procfs-style symlinks. I.e. set LOOKUP_JUMPED... Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 07 November 2011, 22:58:06 UTC |
| 54a0f91 | Linus Torvalds | 07 November 2011, 20:38:11 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Fix live annotation in the --stdio interface perf top tui: Don't recalc column widths considering just the first page perf report: Add progress bar when processing time ordered events perf hists browser: Warn about lost events perf tools: Fix a typo of command name as trace-cmd perf hists: Fix recalculation of total_period when sorting entries perf header: Fix build on old systems perf ui browser: Handle K_RESIZE in dialog windows perf ui browser: No need to switch char sets that often perf hists browser: Use K_TIMER perf ui: Rename ui__warning_paranoid to ui__error_paranoid perf ui: Reimplement the popup windows using libslang perf ui: Reimplement ui__popup_menu using ui__browser perf ui: Reimplement ui_helpline using libslang perf ui: Improve handling sigwinch a bit perf ui progress: Reimplement using slang perf evlist: Fix grouping of multiple events | 07 November 2011, 20:38:11 UTC |
| d30cc16 | Tony Lindgren | 07 November 2011, 20:27:23 UTC | Merge branch 'fixes-modulesplit' into fixes | 07 November 2011, 20:27:23 UTC |
| a1bcc1d | Tony Lindgren | 07 November 2011, 20:27:10 UTC | ARM: OMAP: Fix export.h or module.h includes Commit 32aaeffbd4a7457bf2f7448b33b5946ff2a960eb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> | 07 November 2011, 20:27:10 UTC |
| 5558141 | Axel Lin | 07 November 2011, 20:27:10 UTC | ARM: OMAP: omap_device: Include linux/export.h Include linux/export.h to fix below build warning: CC arch/arm/plat-omap/omap_device.o arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> | 07 November 2011, 20:27:10 UTC |
| 94956ee | Linus Torvalds | 07 November 2011, 18:55:33 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ... | 07 November 2011, 18:55:33 UTC |
| 50e6963 | Al Viro | 07 November 2011, 16:39:57 UTC | vfs: d_invalidate() should leave mountpoints alone Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 07 November 2011, 18:54:10 UTC |
| e45a618 | david decotigny | 05 November 2011, 14:38:24 UTC | forcedeth: fix a few sparse warnings (variable shadowing) This fixes the following sparse warnings: drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 November 2011, 18:31:25 UTC |
| 0bdfea8 | Mandeep Baines | 05 November 2011, 14:38:23 UTC | forcedeth: Improve stats counters Rx byte count was off; instead use the hardware's count. Tx packet count was counting pre-TSO packets; instead count on-the-wire packets. Report hardware dropped frame count as rx_fifo_errors. - The count of transmitted packets reported by the forcedeth driver reports pre-TSO (TCP Segmentation Offload) packet counts and not the count of the number of packets sent on the wire. This change fixes the forcedeth driver to report the correct count. Fixed the code by copying the count stored in the NIC H/W to the value reported by the driver. - Count rx_drop_frame errors as rx_fifo_errors: We see a lot of rx_drop_frame errors if we disable the rx bottom-halves for too long. Normally, rx_fifo_errors would be counted in this case. The rx_drop_frame error count is private to forcedeth and is not reported by ifconfig or sysfs. The rx_fifo_errors count is currently unused in the forcedeth driver. It is reported by ifconfig as overruns. This change reports rx_drop_frame errors as rx_fifo_errors. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 November 2011, 18:31:24 UTC |
