Revision 1cbe06c3cf542d48eb22180163e00f91760ef8cd authored by Linus Torvalds on 28 May 2016, 18:04:16 UTC, committed by Linus Torvalds on 28 May 2016, 18:04:16 UTC
Pull more rdma updates from Doug Ledford:
"This is the second group of code for the 4.7 merge window. It looks
large, but only in one sense. I'll get to that in a minute. The list
of changes here breaks down as follows:
- Dynamic counter infrastructure in the IB drivers
This is a sysfs based code to allow free form access to the
hardware counters RDMA devices might support so drivers don't need
to code this up repeatedly themselves
- SendOnlyFullMember multicast support
- IB router support
- A couple misc fixes
- The big item on the list: hfi1 driver updates, plus moving the hfi1
driver out of staging
There was a group of 15 patches in the hfi1 list that I thought I had
in the first pull request but they weren't. So that added to the
length of the hfi1 section here.
As far as these go, everything but the hfi1 is pretty straight
forward.
The hfi1 is, if you recall, the driver that Al had complaints about
how it used the write/writev interfaces in an overloaded fashion. The
write portion of their interface behaved like the write handler in the
IB stack proper and did bi-directional communications. The writev
interface, on the other hand, only accepts SDMA request structures.
The completions for those structures are sent back via an entirely
different event mechanism.
With the security patch, we put security checks on the write
interface, however, we also knew they would be going away soon. Now,
we've converted the write handler in the hfi1 driver to use ioctls
from the IB reserved magic area for its bidirectional communications.
With that change, Intel has addressed all of the items originally on
their TODO when they went into staging (as well as many items added to
the list later).
As such, I moved them out, and since they were the last item in the
staging/rdma directory, and I don't have immediate plans to use the
staging area again, I removed the staging/rdma area.
Because of the move out of staging, as well as a series of 5 patches
in the hfi1 driver that removed code people thought should be done in
a different way and was optional to begin with (a snoop debug
interface, an eeprom driver for an eeprom connected directory to their
hfi1 chip and not via an i2c bus, and a few other things like that),
the line count, especially the removal count, is high"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (56 commits)
staging/rdma: Remove the entire rdma subdirectory of staging
IB/core: Make device counter infrastructure dynamic
IB/hfi1: Fix pio map initialization
IB/hfi1: Correct 8051 link parameter settings
IB/hfi1: Update pkey table properly after link down or FM start
IB/rdamvt: Fix rdmavt s_ack_queue sizing
IB/rdmavt: Max atomic value should be a u8
IB/hfi1: Fix hard lockup due to not using save/restore spin lock
IB/hfi1: Add tracing support for send with invalidate opcode
IB/hfi1, qib: Add ieth to the packet header definitions
IB/hfi1: Move driver out of staging
IB/hfi1: Do not free hfi1 cdev parent structure early
IB/hfi1: Add trace message in user IOCTL handling
IB/hfi1: Remove write(), use ioctl() for user cmds
IB/hfi1: Add ioctl() interface for user commands
IB/hfi1: Remove unused user command
IB/hfi1: Remove snoop/diag interface
IB/hfi1: Remove EPROM functionality from data device
IB/hfi1: Remove UI char device
IB/hfi1: Remove multiple device cdev
...
crc8.c
/*
* Copyright (c) 2011 Broadcom Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/crc8.h>
#include <linux/printk.h>
/*
* crc8_populate_msb - fill crc table for given polynomial in reverse bit order.
*
* table: table to be filled.
* polynomial: polynomial for which table is to be filled.
*/
void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial)
{
int i, j;
const u8 msbit = 0x80;
u8 t = msbit;
table[0] = 0;
for (i = 1; i < CRC8_TABLE_SIZE; i *= 2) {
t = (t << 1) ^ (t & msbit ? polynomial : 0);
for (j = 0; j < i; j++)
table[i+j] = table[j] ^ t;
}
}
EXPORT_SYMBOL(crc8_populate_msb);
/*
* crc8_populate_lsb - fill crc table for given polynomial in regular bit order.
*
* table: table to be filled.
* polynomial: polynomial for which table is to be filled.
*/
void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial)
{
int i, j;
u8 t = 1;
table[0] = 0;
for (i = (CRC8_TABLE_SIZE >> 1); i; i >>= 1) {
t = (t >> 1) ^ (t & 1 ? polynomial : 0);
for (j = 0; j < CRC8_TABLE_SIZE; j += 2*i)
table[i+j] = table[j] ^ t;
}
}
EXPORT_SYMBOL(crc8_populate_lsb);
/*
* crc8 - calculate a crc8 over the given input data.
*
* table: crc table used for calculation.
* pdata: pointer to data buffer.
* nbytes: number of bytes in data buffer.
* crc: previous returned crc8 value.
*/
u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc)
{
/* loop over the buffer data */
while (nbytes-- > 0)
crc = table[(crc ^ *pdata++) & 0xff];
return crc;
}
EXPORT_SYMBOL(crc8);
MODULE_DESCRIPTION("CRC8 (by Williams, Ross N.) function");
MODULE_AUTHOR("Broadcom Corporation");
MODULE_LICENSE("Dual BSD/GPL");
Computing file changes ...
