Revision 1d08d70fb07cfcfc9e89ae1a2521411b1e1724e5 authored by Jameson Nash on 25 February 2020, 17:47:56 UTC, committed by Jameson Nash on 03 March 2020, 22:04:18 UTC
We want tmerge to form a smaller supertype, so we need to make sure the result is on the intersection of the supertype and simplicity lattice. Previously, we first only checked the supertype lattice, then considered the simplicity lattice only if that failed. fix #34834
1 parent 4eb0943
Makefile
JULIAHOME := $(abspath $(dir $(lastword $(MAKEFILE_LIST))))
include $(JULIAHOME)/Make.inc
VERSDIR := v`cut -d. -f1-2 < $(JULIAHOME)/VERSION`
default: $(JULIA_BUILD_MODE) # contains either "debug" or "release"
all: debug release
# sort is used to remove potential duplicates
DIRS := $(sort $(build_bindir) $(build_depsbindir) $(build_libdir) $(build_private_libdir) $(build_libexecdir) $(build_includedir) $(build_includedir)/julia $(build_sysconfdir)/julia $(build_datarootdir)/julia $(build_datarootdir)/julia/stdlib $(build_man1dir))
ifneq ($(BUILDROOT),$(JULIAHOME))
BUILDDIRS := $(BUILDROOT) $(addprefix $(BUILDROOT)/,base src src/flisp src/support src/clangsa ui doc deps stdlib test test/embedding test/llvmpasses)
BUILDDIRMAKE := $(addsuffix /Makefile,$(BUILDDIRS)) $(BUILDROOT)/sysimage.mk
DIRS := $(DIRS) $(BUILDDIRS)
$(BUILDDIRMAKE): | $(BUILDDIRS)
@# add Makefiles to the build directories for convenience (pointing back to the source location of each)
@echo '# -- This file is automatically generated in julia/Makefile -- #' > $@
@echo 'BUILDROOT=$(BUILDROOT)' >> $@
@echo 'include $(JULIAHOME)$(patsubst $(BUILDROOT)%,%,$@)' >> $@
julia-deps: | $(BUILDDIRMAKE)
configure-y: | $(BUILDDIRMAKE)
configure:
ifeq ("$(origin O)", "command line")
@if [ "$$(ls '$(BUILDROOT)' 2> /dev/null)" ]; then \
echo 'WARNING: configure called on non-empty directory $(BUILDROOT)'; \
read -p "Proceed [y/n]? " answer; \
else \
answer=y;\
fi; \
[ $$answer = 'y' ] && $(MAKE) configure-$$answer
else
$(error "cannot rerun configure from within a build directory")
endif
else
configure:
$(error "must specify O=builddir to run the Julia `make configure` target")
endif
$(foreach dir,$(DIRS),$(eval $(call dir_target,$(dir))))
$(foreach link,base $(JULIAHOME)/test,$(eval $(call symlink_target,$(link),$$(build_datarootdir)/julia,$(notdir $(link)))))
julia_flisp.boot.inc.phony: julia-deps
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/src julia_flisp.boot.inc.phony
# Build the HTML docs (skipped if already exists, notably in tarballs)
$(BUILDROOT)/doc/_build/html/en/index.html: $(shell find $(BUILDROOT)/base $(BUILDROOT)/doc \( -path $(BUILDROOT)/doc/_build -o -path $(BUILDROOT)/doc/deps -o -name *_constants.jl -o -name *_h.jl -o -name version_git.jl \) -prune -o -type f -print)
@$(MAKE) docs
julia-symlink: julia-ui-$(JULIA_BUILD_MODE)
ifeq ($(OS),WINNT)
@echo '@"%~dp0"\'"$(shell $(JULIAHOME)/contrib/relative_path.sh "$(BUILDROOT)" "$(JULIA_EXECUTABLE)" | tr / '\\')" '%*' > $(BUILDROOT)/julia.bat
chmod a+x $(BUILDROOT)/julia.bat
else
ifndef JULIA_VAGRANT_BUILD
@ln -sf "$(shell $(JULIAHOME)/contrib/relative_path.sh "$(BUILDROOT)" "$(JULIA_EXECUTABLE)")" $(BUILDROOT)/julia
endif
endif
julia-deps: | $(DIRS) $(build_datarootdir)/julia/base $(build_datarootdir)/julia/test
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/deps
julia-stdlib: | $(DIRS)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/stdlib
julia-base: julia-deps $(build_sysconfdir)/julia/startup.jl $(build_man1dir)/julia.1 $(build_datarootdir)/julia/julia-config.jl
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/base
julia-libccalltest: julia-deps
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/src libccalltest
julia-libllvmcalltest: julia-deps
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/src libllvmcalltest
julia-src-release julia-src-debug : julia-src-% : julia-deps julia_flisp.boot.inc.phony
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/src libjulia-$*
julia-ui-release julia-ui-debug : julia-ui-% : julia-src-%
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/ui julia-$*
julia-sysimg-ji : julia-stdlib julia-base julia-ui-$(JULIA_BUILD_MODE) | $(build_private_libdir)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT) -f sysimage.mk sysimg-ji JULIA_EXECUTABLE='$(JULIA_EXECUTABLE)'
julia-sysimg-bc : julia-stdlib julia-base julia-ui-$(JULIA_BUILD_MODE) | $(build_private_libdir)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT) -f sysimage.mk sysimg-bc JULIA_EXECUTABLE='$(JULIA_EXECUTABLE)'
julia-sysimg-release julia-sysimg-debug : julia-sysimg-% : julia-sysimg-ji julia-ui-%
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT) -f sysimage.mk sysimg-$*
julia-debug julia-release : julia-% : julia-sysimg-% julia-symlink julia-libccalltest julia-libllvmcalltest julia-base-cache
debug release : % : julia-%
docs: julia-sysimg-$(JULIA_BUILD_MODE)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/doc JULIA_EXECUTABLE='$(call spawn,$(JULIA_EXECUTABLE_$(JULIA_BUILD_MODE))) --startup-file=no'
check-whitespace:
ifneq ($(NO_GIT), 1)
@$(JULIAHOME)/contrib/check-whitespace.sh
else
$(warn "Skipping whitespace check because git is unavailable")
endif
release-candidate: release testall
@$(JULIA_EXECUTABLE) $(JULIAHOME)/contrib/add_license_to_files.jl #add license headers
@#Check documentation
@$(JULIA_EXECUTABLE) $(JULIAHOME)/doc/NEWS-update.jl #Add missing cross-references to NEWS.md
@$(MAKE) -C $(BUILDROOT)/doc html doctest=true linkcheck=true
@$(MAKE) -C $(BUILDROOT)/doc pdf
@# Check to see if the above make invocations changed anything important
@if [ -n "$$(git status --porcelain)" ]; then \
echo "Git repository dirty; Verify and commit changes to the repository, then retry"; \
exit 1; \
fi
@#Check that netload tests work
@#for test in test/netload/*.jl; do julia $$test; if [ $$? -ne 0 ]; then exit 1; fi; done
@echo
@echo To complete the release candidate checklist:
@echo
@echo 1. Remove deprecations in base/deprecated.jl
@echo 2. Update references to the julia version in the source directories, such as in README.md
@echo 3. Bump VERSION
@echo 4. Increase SOMAJOR and SOMINOR if needed.
@echo 5. Create tag, push to github "\(git tag v\`cat VERSION\` && git push --tags\)" #"` # These comments deal with incompetent syntax highlighting rules
@echo 6. Clean out old .tar.gz files living in deps/, "\`git clean -fdx\`" seems to work #"`
@echo 7. Replace github release tarball with tarballs created from make light-source-dist and make full-source-dist
@echo 8. Check that 'make && make install && make test' succeed with unpacked tarballs even without Internet access.
@echo 9. Follow packaging instructions in DISTRIBUTING.md to create binary packages for all platforms
@echo 10. Upload to AWS, update https://julialang.org/downloads and http://status.julialang.org/stable links
@echo 11. Update checksums on AWS for tarball and packaged binaries
@echo 12. Announce on mailing lists
@echo 13. Change master to release-0.X in base/version.jl and base/version_git.sh as in 4cb1e20
@echo
$(build_man1dir)/julia.1: $(JULIAHOME)/doc/man/julia.1 | $(build_man1dir)
@echo Copying in usr/share/man/man1/julia.1
@mkdir -p $(build_man1dir)
@cp $< $@
$(build_sysconfdir)/julia/startup.jl: $(JULIAHOME)/etc/startup.jl | $(build_sysconfdir)/julia
@echo Creating usr/etc/julia/startup.jl
@cp $< $@
$(build_datarootdir)/julia/julia-config.jl: $(JULIAHOME)/contrib/julia-config.jl | $(build_datarootdir)/julia
$(INSTALL_M) $< $(dir $@)
$(build_depsbindir)/stringreplace: $(JULIAHOME)/contrib/stringreplace.c | $(build_depsbindir)
@$(call PRINT_CC, $(HOSTCC) -o $(build_depsbindir)/stringreplace $(JULIAHOME)/contrib/stringreplace.c)
julia-base-cache: julia-sysimg-$(JULIA_BUILD_MODE) | $(DIRS) $(build_datarootdir)/julia
@JULIA_BINDIR=$(call cygpath_w,$(build_bindir)) $(call spawn, $(JULIA_EXECUTABLE) --startup-file=no $(call cygpath_w,$(JULIAHOME)/etc/write_base_cache.jl) \
$(call cygpath_w,$(build_datarootdir)/julia/base.cache))
# public libraries, that are installed in $(prefix)/lib
JL_TARGETS := julia
ifeq ($(BUNDLE_DEBUG_LIBS),1)
JL_TARGETS += julia-debug
endif
# private libraries, that are installed in $(prefix)/lib/julia
JL_PRIVATE_LIBS-0 := libccalltest libllvmcalltest
ifeq ($(USE_GPL_LIBS), 1)
JL_PRIVATE_LIBS-0 += libsuitesparse_wrapper
JL_PRIVATE_LIBS-$(USE_SYSTEM_SUITESPARSE) += libamd libcamd libccolamd libcholmod libcolamd libumfpack libspqr libsuitesparseconfig
endif
JL_PRIVATE_LIBS-$(USE_SYSTEM_PCRE) += libpcre2-8
JL_PRIVATE_LIBS-$(USE_SYSTEM_DSFMT) += libdSFMT
JL_PRIVATE_LIBS-$(USE_SYSTEM_GMP) += libgmp
JL_PRIVATE_LIBS-$(USE_SYSTEM_MPFR) += libmpfr
JL_PRIVATE_LIBS-$(USE_SYSTEM_LIBSSH2) += libssh2
JL_PRIVATE_LIBS-$(USE_SYSTEM_MBEDTLS) += libmbedtls libmbedcrypto libmbedx509
JL_PRIVATE_LIBS-$(USE_SYSTEM_CURL) += libcurl
JL_PRIVATE_LIBS-$(USE_SYSTEM_LIBGIT2) += libgit2
ifeq ($(OS),WINNT)
JL_PRIVATE_LIBS-$(USE_SYSTEM_ZLIB) += zlib
else
JL_PRIVATE_LIBS-$(USE_SYSTEM_ZLIB) += libz
endif
ifeq ($(USE_LLVM_SHLIB),1)
JL_PRIVATE_LIBS-$(USE_SYSTEM_LLVM) += libLLVM libLLVM-9
endif
ifeq ($(USE_SYSTEM_LIBM),0)
JL_PRIVATE_LIBS-$(USE_SYSTEM_OPENLIBM) += libopenlibm
endif
JL_PRIVATE_LIBS-$(USE_SYSTEM_BLAS) += $(LIBBLASNAME)
ifneq ($(LIBLAPACKNAME),$(LIBBLASNAME))
JL_PRIVATE_LIBS-$(USE_SYSTEM_LAPACK) += $(LIBLAPACKNAME)
endif
ifeq ($(OS),Darwin)
ifeq ($(USE_SYSTEM_BLAS),1)
ifeq ($(USE_SYSTEM_LAPACK),0)
JL_PRIVATE_LIBS-0 += libgfortblas
endif
endif
endif
# On FreeBSD, /lib/libgcc_s.so.1 is incompatible with Fortran; to use Fortran on FreeBSD,
# we need to link to the libgcc_s that ships with the same GCC version used by libgfortran.
# To work around this, we copy the GCC libraries we need, namely libgfortran, libgcc_s,
# and libquadmath, into our build library directory, $(build_libdir). We also add them to
# JL_PRIVATE_LIBS-0 so that they know where they need to live at install time.
ifeq ($(OS),FreeBSD)
define std_so
julia-deps: | $$(build_libdir)/$(1).so
$$(build_libdir)/$(1).so: | $$(build_libdir)
$$(INSTALL_M) $$(GCCPATH)/$(1).so* $$(build_libdir)
JL_PRIVATE_LIBS-0 += $(1)
endef
$(eval $(call std_so,libgfortran))
$(eval $(call std_so,libgcc_s))
$(eval $(call std_so,libquadmath))
endif # FreeBSD
ifeq ($(OS),WINNT)
# find the standard .dll folders
ifeq ($(XC_HOST),)
STD_LIB_PATH ?= $(PATH)
else
STD_LIB_PATH := $(shell LANG=C $(CC) -print-search-dirs | grep '^programs: =' | sed -e "s/^programs: =//")
STD_LIB_PATH += :$(shell LANG=C $(CC) -print-search-dirs | grep '^libraries: =' | sed -e "s/^libraries: =//")
ifneq (,$(findstring CYGWIN,$(BUILD_OS))) # the cygwin-mingw32 compiler lies about it search directory paths
STD_LIB_PATH := $(shell echo '$(STD_LIB_PATH)' | sed -e "s!/lib/!/bin/!g")
endif
endif
pathsearch = $(firstword $(wildcard $(addsuffix /$(1),$(subst :, ,$(2)))))
define std_dll
julia-deps-libs: | $$(build_bindir)/lib$(1).dll $$(build_depsbindir)/lib$(1).dll
$$(build_bindir)/lib$(1).dll: | $$(build_bindir)
cp $$(or $$(call pathsearch,lib$(1).dll,$$(STD_LIB_PATH)),$$(error can't find lib$1.dll)) $$(build_bindir)
$$(build_depsbindir)/lib$(1).dll: | $$(build_depsbindir)
cp $$(or $$(call pathsearch,lib$(1).dll,$$(STD_LIB_PATH)),$$(error can't find lib$1.dll)) $$(build_depsbindir)
JL_TARGETS += $(1)
endef
julia-deps: julia-deps-libs
# Given a list of space-separated libraries, return the first library name that is
# correctly found through `pathsearch`.
define select_std_dll
$(firstword $(foreach name,$(1),$(if $(call pathsearch,lib$(name).dll,$(STD_LIB_PATH)),$(name),)))
endef
$(eval $(call std_dll,$(call select_std_dll,gfortran-3 gfortran-4 gfortran-5)))
$(eval $(call std_dll,quadmath-0))
$(eval $(call std_dll,stdc++-6))
ifeq ($(ARCH),i686)
$(eval $(call std_dll,gcc_s_sjlj-1))
else
$(eval $(call std_dll,gcc_s_seh-1))
endif
$(eval $(call std_dll,ssp-0))
$(eval $(call std_dll,winpthread-1))
$(eval $(call std_dll,atomic-1))
endif
define stringreplace
$(build_depsbindir)/stringreplace $$(strings -t x - $1 | grep '$2' | awk '{print $$1;}') '$3' 255 "$(call cygpath_w,$1)"
endef
# Run fixup-libgfortran on all platforms but Windows and FreeBSD. On FreeBSD we
# pull in the GCC libraries earlier and use them for the build to make sure we
# don't inadvertently link to /lib/libgcc_s.so.1, which is incompatible with
# libgfortran, and on Windows we copy them in earlier as well.
ifeq (,$(findstring $(OS),FreeBSD WINNT))
julia-base: $(build_libdir)/libgfortran*.$(SHLIB_EXT)*
$(build_libdir)/libgfortran*.$(SHLIB_EXT)*: | $(build_libdir) julia-deps
-$(CUSTOM_LD_LIBRARY_PATH) PATH="$(PATH):$(build_depsbindir)" PATCHELF="$(PATCHELF)" $(JULIAHOME)/contrib/fixup-libgfortran.sh --verbose $(build_libdir)
JL_PRIVATE_LIBS-0 += libgfortran libgcc_s libquadmath
endif
install: $(build_depsbindir)/stringreplace $(BUILDROOT)/doc/_build/html/en/index.html
ifeq ($(BUNDLE_DEBUG_LIBS),1)
@$(MAKE) $(QUIET_MAKE) all
else
@$(MAKE) $(QUIET_MAKE) release
endif
@for subdir in $(bindir) $(datarootdir)/julia/stdlib/$(VERSDIR) $(docdir) $(man1dir) $(includedir)/julia $(libdir) $(private_libdir) $(sysconfdir) $(libexecdir); do \
mkdir -p $(DESTDIR)$$subdir; \
done
$(INSTALL_M) $(build_bindir)/julia $(DESTDIR)$(bindir)/
ifeq ($(BUNDLE_DEBUG_LIBS),1)
$(INSTALL_M) $(build_bindir)/julia-debug $(DESTDIR)$(bindir)/
endif
ifeq ($(OS),WINNT)
-$(INSTALL_M) $(filter-out $(build_bindir)/libjulia-debug.dll,$(wildcard $(build_bindir)/*.dll)) $(DESTDIR)$(bindir)/
-$(INSTALL_M) $(build_libdir)/libjulia.dll.a $(DESTDIR)$(libdir)/
# We have a single exception; we want 7z.dll to live in libexec, not bin, so that 7z.exe can find it.
-mv $(DESTDIR)$(bindir)/7z.dll $(DESTDIR)$(libexecdir)/
ifeq ($(BUNDLE_DEBUG_LIBS),1)
-$(INSTALL_M) $(build_bindir)/libjulia-debug.dll $(DESTDIR)$(bindir)/
-$(INSTALL_M) $(build_libdir)/libjulia-debug.dll.a $(DESTDIR)$(libdir)/
endif
-$(INSTALL_M) $(build_bindir)/libopenlibm.dll.a $(DESTDIR)$(libdir)/
else
# Copy over .dSYM directories directly for Darwin
ifneq ($(DARWIN_FRAMEWORK),1)
ifeq ($(OS),Darwin)
-cp -a $(build_libdir)/libjulia.*.dSYM $(DESTDIR)$(libdir)
-cp -a $(build_private_libdir)/sys.dylib.dSYM $(DESTDIR)$(private_libdir)
ifeq ($(BUNDLE_DEBUG_LIBS),1)
-cp -a $(build_libdir)/libjulia-debug.*.dSYM $(DESTDIR)$(libdir)
-cp -a $(build_private_libdir)/sys-debug.dylib.dSYM $(DESTDIR)$(private_libdir)
endif
endif
for suffix in $(JL_TARGETS) ; do \
for lib in $(build_libdir)/lib$${suffix}.*$(SHLIB_EXT)*; do \
if [ "$${lib##*.}" != "dSYM" ]; then \
$(INSTALL_M) $$lib $(DESTDIR)$(libdir) ; \
fi \
done \
done
else
# libjulia in Darwin framework has special location and name
$(INSTALL_M) $(build_libdir)/libjulia.$(SOMAJOR).$(SOMINOR).dylib $(DESTDIR)$(prefix)/$(framework_dylib)
@$(DSYMUTIL) -o $(DESTDIR)$(prefix)/$(framework_resources)/$(FRAMEWORK_NAME).dSYM $(DESTDIR)$(prefix)/$(framework_dylib)
@$(DSYMUTIL) -o $(DESTDIR)$(prefix)/$(framework_resources)/sys.dylib.dSYM $(build_private_libdir)/sys.dylib
ifeq ($(BUNDLE_DEBUG_LIBS),1)
$(INSTALL_M) $(build_libdir)/libjulia-debug.$(SOMAJOR).$(SOMINOR).dylib $(DESTDIR)$(prefix)/$(framework_dylib)_debug
@$(DSYMUTIL) -o $(DESTDIR)$(prefix)/$(framework_resources)/$(FRAMEWORK_NAME)_debug.dSYM $(DESTDIR)$(prefix)/$(framework_dylib)_debug
@$(DSYMUTIL) -o $(DESTDIR)$(prefix)/$(framework_resources)/sys-debug.dylib.dSYM $(build_private_libdir)/sys-debug.dylib
endif
endif
for suffix in $(JL_PRIVATE_LIBS-0) ; do \
for lib in $(build_libdir)/$${suffix}.*$(SHLIB_EXT)*; do \
if [ "$${lib##*.}" != "dSYM" ]; then \
$(INSTALL_M) $$lib $(DESTDIR)$(private_libdir) ; \
fi \
done \
done
for suffix in $(JL_PRIVATE_LIBS-1) ; do \
lib=$(build_private_libdir)/$${suffix}.$(SHLIB_EXT); \
$(INSTALL_M) $$lib $(DESTDIR)$(private_libdir) ; \
done
endif
# Install `7z` into libexec/
$(INSTALL_M) $(build_bindir)/7z$(EXE) $(DESTDIR)$(libexecdir)/
# Copy public headers
cp -R -L $(build_includedir)/julia/* $(DESTDIR)$(includedir)/julia
# Copy system image
$(INSTALL_M) $(build_private_libdir)/sys.$(SHLIB_EXT) $(DESTDIR)$(private_libdir)
ifeq ($(BUNDLE_DEBUG_LIBS),1)
$(INSTALL_M) $(build_private_libdir)/sys-debug.$(SHLIB_EXT) $(DESTDIR)$(private_libdir)
endif
# Copy in all .jl sources as well
mkdir -p $(DESTDIR)$(datarootdir)/julia/base $(DESTDIR)$(datarootdir)/julia/test
cp -R -L $(JULIAHOME)/base/* $(DESTDIR)$(datarootdir)/julia/base
cp -R -L $(JULIAHOME)/test/* $(DESTDIR)$(datarootdir)/julia/test
cp -R -L $(build_datarootdir)/julia/* $(DESTDIR)$(datarootdir)/julia
# Copy documentation
cp -R -L $(BUILDROOT)/doc/_build/html $(DESTDIR)$(docdir)/
# Remove various files which should not be installed
-rm -f $(DESTDIR)$(datarootdir)/julia/base/version_git.sh
-rm -f $(DESTDIR)$(datarootdir)/julia/test/Makefile
-rm -f $(DESTDIR)$(datarootdir)/julia/stdlib/$(VERSDIR)/*/source-extracted
-rm -f $(DESTDIR)$(datarootdir)/julia/stdlib/$(VERSDIR)/*/build-configured
-rm -f $(DESTDIR)$(datarootdir)/julia/stdlib/$(VERSDIR)/*/build-compiled
-rm -f $(DESTDIR)$(datarootdir)/julia/stdlib/$(VERSDIR)/*/build-checked
# Copy in beautiful new man page
$(INSTALL_F) $(build_man1dir)/julia.1 $(DESTDIR)$(man1dir)/
# Copy icon and .desktop file
mkdir -p $(DESTDIR)$(datarootdir)/icons/hicolor/scalable/apps/
$(INSTALL_F) $(JULIAHOME)/contrib/julia.svg $(DESTDIR)$(datarootdir)/icons/hicolor/scalable/apps/
-touch -c $(DESTDIR)$(datarootdir)/icons/hicolor/
mkdir -p $(DESTDIR)$(datarootdir)/applications/
$(INSTALL_F) $(JULIAHOME)/contrib/julia.desktop $(DESTDIR)$(datarootdir)/applications/
# Install appdata file
mkdir -p $(DESTDIR)$(datarootdir)/appdata/
$(INSTALL_F) $(JULIAHOME)/contrib/julia.appdata.xml $(DESTDIR)$(datarootdir)/appdata/
# Update RPATH entries and JL_SYSTEM_IMAGE_PATH if $(private_libdir_rel) != $(build_private_libdir_rel)
ifneq ($(private_libdir_rel),$(build_private_libdir_rel))
ifeq ($(OS), Darwin)
ifneq ($(DARWIN_FRAMEWORK),1)
for j in $(JL_TARGETS) ; do \
install_name_tool -rpath @executable_path/$(build_private_libdir_rel) @executable_path/$(private_libdir_rel) $(DESTDIR)$(bindir)/$$j; \
install_name_tool -add_rpath @executable_path/$(build_libdir_rel) @executable_path/$(libdir_rel) $(DESTDIR)$(bindir)/$$j; \
done
endif
else ifneq (,$(findstring $(OS),Linux FreeBSD))
for j in $(JL_TARGETS) ; do \
$(PATCHELF) --set-rpath '$$ORIGIN/$(private_libdir_rel):$$ORIGIN/$(libdir_rel)' $(DESTDIR)$(bindir)/$$j; \
done
endif
# Overwrite JL_SYSTEM_IMAGE_PATH in julia library
if [ $(DARWIN_FRAMEWORK) = 0 ]; then \
RELEASE_TARGET=$(DESTDIR)$(libdir)/libjulia.$(SHLIB_EXT); \
DEBUG_TARGET=$(DESTDIR)$(libdir)/libjulia-debug.$(SHLIB_EXT); \
else \
RELEASE_TARGET=$(DESTDIR)$(prefix)/$(framework_dylib); \
DEBUG_TARGET=$(DESTDIR)$(prefix)/$(framework_dylib)_debug; \
fi; \
$(call stringreplace,$${RELEASE_TARGET},sys.$(SHLIB_EXT)$$,$(private_libdir_rel)/sys.$(SHLIB_EXT)); \
if [ $(BUNDLE_DEBUG_LIBS) = 1 ]; then \
$(call stringreplace,$${DEBUG_TARGET},sys-debug.$(SHLIB_EXT)$$,$(private_libdir_rel)/sys-debug.$(SHLIB_EXT)); \
fi;
endif
# On FreeBSD, remove the build's libdir from each library's RPATH
ifeq ($(OS),FreeBSD)
$(JULIAHOME)/contrib/fixup-rpath.sh "$(PATCHELF)" $(DESTDIR)$(libdir) $(build_libdir)
$(JULIAHOME)/contrib/fixup-rpath.sh "$(PATCHELF)" $(DESTDIR)$(private_libdir) $(build_libdir)
$(JULIAHOME)/contrib/fixup-rpath.sh "$(PATCHELF)" $(DESTDIR)$(bindir) $(build_libdir)
# Set libgfortran's RPATH to ORIGIN instead of GCCPATH. It's only libgfortran that
# needs to be fixed here, as libgcc_s and libquadmath don't have RPATHs set. If we
# don't set libgfortran's RPATH, it won't be able to find its friends on systems
# that don't have the exact GCC port installed used for the build.
for lib in $(DESTDIR)$(private_libdir)/libgfortran*$(SHLIB_EXT)*; do \
$(PATCHELF) --set-rpath '$$ORIGIN' $$lib; \
done
endif
mkdir -p $(DESTDIR)$(sysconfdir)
cp -R $(build_sysconfdir)/julia $(DESTDIR)$(sysconfdir)/
ifeq ($(DARWIN_FRAMEWORK),1)
$(MAKE) -C $(JULIAHOME)/contrib/mac/framework frameworknoinstall
endif
distclean:
-rm -fr $(BUILDROOT)/julia-*.tar.gz $(BUILDROOT)/julia*.exe $(BUILDROOT)/julia-$(JULIA_COMMIT)
binary-dist: distclean
ifeq ($(USE_SYSTEM_BLAS),0)
ifeq ($(ISX86),1)
ifneq ($(OPENBLAS_DYNAMIC_ARCH),1)
@echo OpenBLAS must be rebuilt with OPENBLAS_DYNAMIC_ARCH=1 to use binary-dist target
@false
endif
endif
endif
ifneq ($(prefix),$(abspath julia-$(JULIA_COMMIT)))
$(error prefix must not be set for make binary-dist)
endif
ifneq ($(DESTDIR),)
$(error DESTDIR must not be set for make binary-dist)
endif
@$(MAKE) -C $(BUILDROOT) -f $(JULIAHOME)/Makefile install
cp $(JULIAHOME)/LICENSE.md $(BUILDROOT)/julia-$(JULIA_COMMIT)
ifeq ($(OS), Linux)
-$(JULIAHOME)/contrib/fixup-libstdc++.sh $(DESTDIR)$(libdir) $(DESTDIR)$(private_libdir)
# Copy over any bundled ca certs we picked up from the system during buildi
-cp $(build_datarootdir)/julia/cert.pem $(DESTDIR)$(datarootdir)/julia/
endif
# Copy in startup.jl files per-platform for binary distributions as well
# Note that we don't install to sysconfdir: we always install to $(DESTDIR)$(prefix)/etc.
# If you want to make a distribution with a hardcoded path, you take care of installation
ifeq ($(OS), Darwin)
-cat $(JULIAHOME)/contrib/mac/startup.jl >> $(DESTDIR)$(prefix)/etc/julia/startup.jl
endif
ifeq ($(OS), WINNT)
cd $(BUILDROOT)/julia-$(JULIA_COMMIT)/bin && rm -f llvm* llc.exe lli.exe opt.exe LTO.dll bugpoint.exe macho-dump.exe
# run Inno Setup to compile installer; /O flag specifies where to place installer and /F flag the installer name
$(call spawn,$(JULIAHOME)/dist-extras/inno/iscc.exe /DAppVersion=$(JULIA_VERSION) /DAppSourceFiles="$(call cygpath_w,$(BUILDROOT)/julia-$(JULIA_COMMIT))" /DAppHomeFiles="$(call cygpath_w,$(JULIAHOME))" /F"$(JULIA_BINARYDIST_FILENAME)" /O"$(call cygpath_w,$(BUILDROOT))" $(call cygpath_w,$(JULIAHOME)/contrib/windows/build-installer.iss))
chmod a+x "$(BUILDROOT)/$(JULIA_BINARYDIST_FILENAME).exe"
else
cd $(BUILDROOT) && $(TAR) zcvf $(JULIA_BINARYDIST_FILENAME).tar.gz julia-$(JULIA_COMMIT)
endif
rm -fr $(BUILDROOT)/julia-$(JULIA_COMMIT)
app:
$(MAKE) -C contrib/mac/app
@mv contrib/mac/app/$(JULIA_BINARYDIST_FILENAME).dmg $(BUILDROOT)
darwinframework:
$(MAKE) -C $(JULIAHOME)/contrib/mac/framework
light-source-dist.tmp: $(BUILDROOT)/doc/_build/html/en/index.html
ifneq ($(BUILDROOT),$(JULIAHOME))
$(error make light-source-dist does not work in out-of-tree builds)
endif
# Save git information
-@$(MAKE) -C $(JULIAHOME)/base version_git.jl.phony
# Create file light-source-dist.tmp to hold all the filenames that go into the tarball
echo "base/version_git.jl" > light-source-dist.tmp
# Download all stdlibs and include the tarball filenames in light-source-dist.tmp
@$(MAKE) -C stdlib getall NO_GIT=1
-ls stdlib/srccache/*.tar.gz >> light-source-dist.tmp
# Exclude git, github and CI config files
git ls-files | sed -E -e '/^\..+/d' -e '/\/\..+/d' -e '/appveyor.yml/d' >> light-source-dist.tmp
find doc/_build/html >> light-source-dist.tmp
# Make tarball with only Julia code + stdlib tarballs
light-source-dist: light-source-dist.tmp
# Prefix everything with "julia-$(commit-sha)/" or "julia-$(version)/" and then create tarball
# To achieve prefixing, we temporarily create a symlink in the source directory that points back
# to the source directory.
sed -e "s_.*_julia-${JULIA_COMMIT}/&_" light-source-dist.tmp > light-source-dist.tmp1
ln -s . julia-${JULIA_COMMIT}
tar -cz --no-recursion -T light-source-dist.tmp1 -f julia-$(JULIA_VERSION)_$(JULIA_COMMIT).tar.gz
rm julia-${JULIA_COMMIT}
source-dist:
@echo \'source-dist\' target is deprecated: use \'full-source-dist\' instead.
# Make tarball with Julia code plus all dependencies
full-source-dist: light-source-dist.tmp
# Get all the dependencies downloaded
@$(MAKE) -C deps getall NO_GIT=1
# Create file full-source-dist.tmp to hold all the filenames that go into the tarball
cp light-source-dist.tmp full-source-dist.tmp
-ls deps/srccache/*.tar.gz deps/srccache/*.tar.bz2 deps/srccache/*.tar.xz deps/srccache/*.tgz deps/srccache/*.zip deps/srccache/*.pem >> full-source-dist.tmp
# Prefix everything with "julia-$(commit-sha)/" or "julia-$(version)/" and then create tarball
# To achieve prefixing, we temporarily create a symlink in the source directory that points back
# to the source directory.
sed -e "s_.*_julia-${JULIA_COMMIT}/&_" full-source-dist.tmp > full-source-dist.tmp1
ln -s . julia-${JULIA_COMMIT}
tar -cz --no-recursion -T full-source-dist.tmp1 -f julia-$(JULIA_VERSION)_$(JULIA_COMMIT)-full.tar.gz
rm julia-${JULIA_COMMIT}
clean: | $(CLEAN_TARGETS)
@-$(MAKE) -C $(BUILDROOT)/base clean
@-$(MAKE) -C $(BUILDROOT)/doc clean
@-$(MAKE) -C $(BUILDROOT)/src clean
@-$(MAKE) -C $(BUILDROOT)/ui clean
@-$(MAKE) -C $(BUILDROOT)/test clean
@-$(MAKE) -C $(BUILDROOT)/stdlib clean
-rm -f $(BUILDROOT)/julia
-rm -f $(BUILDROOT)/*.tar.gz
-rm -f $(build_depsbindir)/stringreplace \
$(BUILDROOT)/light-source-dist.tmp $(BUILDROOT)/light-source-dist.tmp1 \
$(BUILDROOT)/full-source-dist.tmp $(BUILDROOT)/full-source-dist.tmp1
-rm -fr $(build_private_libdir)
# Teporarily add this line to the Makefile to remove extras
-rm -fr $(build_datarootdir)/julia/extras
cleanall: clean
@-$(MAKE) -C $(BUILDROOT)/src clean-flisp clean-support
@-$(MAKE) -C $(BUILDROOT)/deps clean-libuv
-rm -fr $(build_prefix) $(build_staging)
distcleanall: cleanall
@-$(MAKE) -C $(BUILDROOT)/stdlib distclean
@-$(MAKE) -C $(BUILDROOT)/deps distcleanall
@-$(MAKE) -C $(BUILDROOT)/doc cleanall
.PHONY: default debug release check-whitespace release-candidate \
julia-debug julia-release julia-stdlib julia-deps julia-deps-libs \
julia-ui-release julia-ui-debug julia-src-release julia-src-debug \
julia-symlink julia-base julia-sysimg julia-sysimg-ji julia-sysimg-release julia-sysimg-debug \
test testall testall1 test test-* test-revise-* \
clean distcleanall cleanall clean-* \
run-julia run-julia-debug run-julia-release run \
install binary-dist light-source-dist.tmp light-source-dist \
dist full-source-dist source-dist
test: check-whitespace $(JULIA_BUILD_MODE)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/test default JULIA_BUILD_MODE=$(JULIA_BUILD_MODE)
testall: check-whitespace $(JULIA_BUILD_MODE)
cp $(JULIA_SYSIMG) $(BUILDROOT)/local.$(SHLIB_EXT)
$(call spawn,$(JULIA_EXECUTABLE) -J $(call cygpath_w,$(BUILDROOT)/local.$(SHLIB_EXT)) -e 'true')
rm $(BUILDROOT)/local.$(SHLIB_EXT)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/test all JULIA_BUILD_MODE=$(JULIA_BUILD_MODE)
testall1: check-whitespace $(JULIA_BUILD_MODE)
@env JULIA_CPU_THREADS=1 $(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/test all JULIA_BUILD_MODE=$(JULIA_BUILD_MODE)
test-%: check-whitespace $(JULIA_BUILD_MODE)
@([ $$(( $$(date +%s) - $$(date -r $(build_private_libdir)/sys.$(SHLIB_EXT) +%s) )) -le 100 ] && \
printf '\033[93m HINT The system image was recently rebuilt. Are you aware of the test-revise-* targets? See CONTRIBUTING.md. \033[0m\n') || true
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/test $* JULIA_BUILD_MODE=$(JULIA_BUILD_MODE)
test-revise-%:
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/test revise-$* JULIA_BUILD_MODE=$(JULIA_BUILD_MODE)
# download target for some hardcoded windows dependencies
.PHONY: win-extras wine_path
win-extras:
@$(MAKE) -C $(BUILDROOT)/deps install-p7zip
mkdir -p $(JULIAHOME)/dist-extras
cd $(JULIAHOME)/dist-extras && \
$(JLDOWNLOAD) http://www.jrsoftware.org/download.php/is.exe && \
chmod a+x is.exe && \
$(call spawn, $(JULIAHOME)/dist-extras/is.exe /DIR="$(call cygpath_w,$(JULIAHOME)/dist-extras/inno)" /PORTABLE=1 /CURRENTUSER /VERYSILENT)
# various statistics about the build that may interest the user
ifeq ($(USE_SYSTEM_LLVM), 1)
LLVM_SIZE := llvm-size$(EXE)
else
LLVM_SIZE := $(build_depsbindir)/llvm-size$(EXE)
endif
build-stats:
@printf $(JULCOLOR)' ==> ./julia binary sizes\n'$(ENDCOLOR)
$(call spawn,$(LLVM_SIZE) -A $(call cygpath_w,$(build_private_libdir)/sys.$(SHLIB_EXT)) \
$(call cygpath_w,$(build_shlibdir)/libjulia.$(SHLIB_EXT)) \
$(call cygpath_w,$(build_bindir)/julia$(EXE)))
@printf $(JULCOLOR)' ==> ./julia launch speedtest\n'$(ENDCOLOR)
@time $(call spawn,$(build_bindir)/julia$(EXE) -e '')
@time $(call spawn,$(build_bindir)/julia$(EXE) -e '')
@time $(call spawn,$(build_bindir)/julia$(EXE) -e '')
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...