Revision 1d5a474240407c38ca8c7484a656ee39f585399c authored by Martin Habets on 02 January 2022, 08:41:22 UTC, committed by Jakub Kicinski on 05 January 2022, 02:14:21 UTC
The RX page_ring is an optional feature that improves performance. When allocation fails the driver can still function, but possibly with a lower bandwidth. Guard against dereferencing a NULL page_ring. Fixes: 2768935a4660 ("sfc: reuse pages to avoid DMA mapping/unmapping costs") Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Reported-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/164111288276.5798.10330502993729113868.stgit@palantir17.mph.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1 parent 6f89ecf
null_blk.rst
.. SPDX-License-Identifier: GPL-2.0
========================
Null block device driver
========================
Overview
========
The null block device (``/dev/nullb*``) is used for benchmarking the various
block-layer implementations. It emulates a block device of X gigabytes in size.
It does not execute any read/write operation, just mark them as complete in
the request queue. The following instances are possible:
Multi-queue block-layer
- Request-based.
- Configurable submission queues per device.
No block-layer (Known as bio-based)
- Bio-based. IO requests are submitted directly to the device driver.
- Directly accepts bio data structure and returns them.
All of them have a completion queue for each core in the system.
Module parameters
=================
queue_mode=[0-2]: Default: 2-Multi-queue
Selects which block-layer the module should instantiate with.
= ============
0 Bio-based
1 Single-queue (deprecated)
2 Multi-queue
= ============
home_node=[0--nr_nodes]: Default: NUMA_NO_NODE
Selects what CPU node the data structures are allocated from.
gb=[Size in GB]: Default: 250GB
The size of the device reported to the system.
bs=[Block size (in bytes)]: Default: 512 bytes
The block size reported to the system.
nr_devices=[Number of devices]: Default: 1
Number of block devices instantiated. They are instantiated as /dev/nullb0,
etc.
irqmode=[0-2]: Default: 1-Soft-irq
The completion mode used for completing IOs to the block-layer.
= ===========================================================================
0 None.
1 Soft-irq. Uses IPI to complete IOs across CPU nodes. Simulates the overhead
when IOs are issued from another CPU node than the home the device is
connected to.
2 Timer: Waits a specific period (completion_nsec) for each IO before
completion.
= ===========================================================================
completion_nsec=[ns]: Default: 10,000ns
Combined with irqmode=2 (timer). The time each completion event must wait.
submit_queues=[1..nr_cpus]: Default: 1
The number of submission queues attached to the device driver. If unset, it
defaults to 1. For multi-queue, it is ignored when use_per_node_hctx module
parameter is 1.
hw_queue_depth=[0..qdepth]: Default: 64
The hardware queue depth of the device.
Multi-queue specific parameters
-------------------------------
use_per_node_hctx=[0/1]: Default: 0
Number of hardware context queues.
= =====================================================================
0 The number of submit queues are set to the value of the submit_queues
parameter.
1 The multi-queue block layer is instantiated with a hardware dispatch
queue for each CPU node in the system.
= =====================================================================
no_sched=[0/1]: Default: 0
Enable/disable the io scheduler.
= ======================================
0 nullb* use default blk-mq io scheduler
1 nullb* doesn't use io scheduler
= ======================================
blocking=[0/1]: Default: 0
Blocking behavior of the request queue.
= ===============================================================
0 Register as a non-blocking blk-mq driver device.
1 Register as a blocking blk-mq driver device, null_blk will set
the BLK_MQ_F_BLOCKING flag, indicating that it sometimes/always
needs to block in its ->queue_rq() function.
= ===============================================================
shared_tags=[0/1]: Default: 0
Sharing tags between devices.
= ================================================================
0 Tag set is not shared.
1 Tag set shared between devices for blk-mq. Only makes sense with
nr_devices > 1, otherwise there's no tag set to share.
= ================================================================
zoned=[0/1]: Default: 0
Device is a random-access or a zoned block device.
= ======================================================================
0 Block device is exposed as a random-access block device.
1 Block device is exposed as a host-managed zoned block device. Requires
CONFIG_BLK_DEV_ZONED.
= ======================================================================
zone_size=[MB]: Default: 256
Per zone size when exposed as a zoned block device. Must be a power of two.
zone_nr_conv=[nr_conv]: Default: 0
The number of conventional zones to create when block device is zoned. If
zone_nr_conv >= nr_zones, it will be reduced to nr_zones - 1.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...