| 1daa1cf | Linus Torvalds | 12 July 2015, 17:02:38 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - the high latency PIT detection fix, which slipped through the cracks for rc1 - a regression fix for the early printk mechanism - the x86 part to plug irq/vector related hotplug races - move the allocation of the espfix pages on cpu hotplug to non atomic context. The current code triggers a might_sleep() warning. - a series of KASAN fixes addressing boot crashes and usability - a trivial typo fix for Kconfig help text * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text x86/irq: Retrieve irq data after locking irq_desc x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable() x86/irq: Plug irq vector hotplug race x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8' x86/espfix: Init espfix on the boot CPU side x86/espfix: Add 'cpu' parameter to init_espfix_ap() x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig x86/kasan: Add message about KASAN being initialized x86/kasan: Fix boot crash on AMD processors x86/kasan: Flush TLBs after switching CR3 x86/kasan: Fix KASAN shadow region page tables x86/init: Clear 'init_level4_pgt' earlier x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate() | 12 July 2015, 17:02:38 UTC |
| 7b73216 | Linus Torvalds | 12 July 2015, 16:36:59 UTC | Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "This update from the timer departement contains: - A series of patches which address a shortcoming in the tick broadcast code. If the broadcast device is not available or an hrtimer emulated broadcast device, some of the original assumptions lead to boot failures. I rather plugged all of the corner cases instead of only addressing the issue reported, so the change got a little larger. Has been extensivly tested on x86 and arm. - Get rid of the last holdouts using do_posix_clock_monotonic_gettime() - A regression fix for the imx clocksource driver - An update to the new state callbacks mechanism for clockevents. This is required to simplify the conversion, which will take place in 4.3" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Prevent NULL pointer dereference time: Get rid of do_posix_clock_monotonic_gettime cris: Replace do_posix_clock_monotonic_gettime() tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build tick/broadcast: Handle spurious interrupts gracefully tick/broadcast: Check for hrtimer broadcast active early tick/broadcast: Return busy when IPI is pending tick/broadcast: Return busy if periodic mode and hrtimer broadcast tick/broadcast: Move the check for periodic mode inside state handling tick/broadcast: Prevent deep idle if no broadcast device available tick/broadcast: Make idle check independent from mode and config tick/broadcast: Sanity check the shutdown of the local clock_event tick/broadcast: Prevent hrtimer recursion clockevents: Allow set-state callbacks to be optional clocksource/imx: Define clocksource for mx27 | 12 July 2015, 16:36:59 UTC |
| c4bc680 | Linus Torvalds | 12 July 2015, 16:15:02 UTC | Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single fix for a cpu hotplug race vs. interrupt descriptors: Prevent irq setup/teardown across the cpu starting/dying parts of cpu hotplug so that the starting/dying cpu has a stable view of the descriptor space. This has been an issue for all architectures in the cpu dying phase, where interrupts are migrated away from the dying cpu. In the starting phase its mostly a x86 issue vs the vector space update" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hotplug: Prevent alloc/free of irq descriptors during cpu up/down | 12 July 2015, 16:15:02 UTC |
| 59c3cb5 | Linus Torvalds | 12 July 2015, 03:44:31 UTC | Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm Pull libnvdimm fixes from Dan Williams: "1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor bug fixes (patches 1-6) 2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10). Granted these are slightly large for a -rc update. They have been out for review in one form or another since the end of May and were deferred from the merge window while we settled on the "PMEM API" for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem, and wmb_pmem). Now that those apis are merged we implement them in the BLK driver to guarantee that mmio aperture moves stay ordered with respect to incoming read/write requests, and that writes are flushed through those mmio-windows and platform-buffers to be persistent on media. These pass the sub-system unit tests with the updates to tools/testing/nvdimm, and have received a successful build-report from the kbuild robot (468 configs). With acks from Rafael for the touches to drivers/acpi/" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h nfit: fix smatch "use after null check" report nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails libnvdimm: smatch cleanups in __nd_ioctl sparse: fix misplaced __pmem definition | 12 July 2015, 03:44:31 UTC |
| e492519 | Linus Torvalds | 11 July 2015, 18:24:15 UTC | Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Mostly slight adjusments for new drivers, but also one core fix for which finally the dependencies are now available as well" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Mark instantiated device nodes with OF_POPULATE i2c: jz4780: Fix return value if probe fails i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error path i2c: I2C_MT65XX should depend on HAS_DMA | 11 July 2015, 18:24:15 UTC |
| 8a7b8ff | Linus Torvalds | 11 July 2015, 18:16:04 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix (revert) for a recent regression in Synaptics driver and a fix for Elan i2c touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" Input: elan_i2c - change the hover event from MT to ST | 11 July 2015, 18:16:04 UTC |
| 4322f02 | Linus Torvalds | 11 July 2015, 18:08:21 UTC | Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A small set of fixes for problems found by smatch in new drivers that we added this rc and a handful of driver fixes that came in during the merge window" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: drivers: clk: st: Incorrect register offset used for lock_status clk: mediatek: mt8173: Fix enabling of critical clocks drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks drivers: clk: st: Fix flexgen lock init drivers: clk: st: Fix FSYN channel values drivers: clk: st: Remove unused code clk: qcom: Use parent rate when set rate to pixel RCG clock clk: at91: do not leak resources clk: stm32: Fix out-by-one error path in the index lookup clk: iproc: fix bit manipulation arithmetic clk: iproc: fix memory leak from clock name | 11 July 2015, 18:08:21 UTC |
| 9cb1680 | Linus Torvalds | 11 July 2015, 18:02:51 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "A bunch of fixes for radeon, intel, omap and one amdkfd fix. Radeon fixes are all over, but it does fix some cursor corruption across suspend/resume. i915 should fix the second warn you were seeing, so let us know if not. omap is a bunch of small fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) drm/radeon: disable vce init on cayman (v2) drm/amdgpu: fix timeout calculation drm/radeon: check if BO_VA is set before adding it to the invalidation list drm/radeon: allways add the VM clear duplicate Revert "Revert "drm/radeon: dont switch vt on suspend"" drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor() drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2) drm/radeon: Clean up reference counting and pinning of the cursor BOs drm/amdkfd: validate pdd where it acquired first Revert "drm/i915: Allocate context objects from stolen" drm/i915: Declare the swizzling unknown for L-shaped configurations drm/radeon: fix underflow in r600_cp_dispatch_texture() drm/radeon: default to 2048 MB GART size on SI+ drm/radeon: fix HDP flushing drm/radeon: use RCU query for GEM_BUSY syscall drm/amdgpu: Handle irqs only based on irq ring, not irq status regs. drm/radeon: Handle irqs only based on irq ring, not irq status regs. drm/i915: Use crtc_state->active in primary check_plane func drm/i915: Check crtc->active in intel_crtc_disable_planes drm/i915: Restore all GGTT VMAs on resume ... | 11 July 2015, 18:02:51 UTC |
| 2278cb0 | Linus Torvalds | 11 July 2015, 17:38:10 UTC | Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull selinux fixes from James Morris. * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix mprotect PROT_EXEC regression caused by mm change selinux: don't waste ebitmap space when importing NetLabel categories | 11 July 2015, 17:38:10 UTC |
| 31b7a57 | Linus Torvalds | 11 July 2015, 17:26:34 UTC | Merge branch 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This is an assortment of fixes. Most of the commits are from Filipe (fsync, the inode allocation cache and a few others). Mark kicked in a series fixing corners in the extent sharing ioctls, and everyone else fixed up on assorted other problems" * 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix wrong check for btrfs_force_chunk_alloc() Btrfs: fix warning of bytes_may_use Btrfs: fix hang when failing to submit bio of directIO Btrfs: fix a comment in inode.c:evict_inode_truncate_pages() Btrfs: fix memory corruption on failure to submit bio for direct IO btrfs: don't update mtime/ctime on deduped inodes btrfs: allow dedupe of same inode btrfs: fix deadlock with extent-same and readpage btrfs: pass unaligned length to btrfs_cmp_data() Btrfs: fix fsync after truncate when no_holes feature is enabled Btrfs: fix fsync xattr loss in the fast fsync path Btrfs: fix fsync data loss after append write Btrfs: fix crash on close_ctree() if cleaner starts new transaction Btrfs: fix race between caching kthread and returning inode to inode cache Btrfs: use kmem_cache_free when freeing entry in inode cache Btrfs: fix race between balance and unused block group deletion btrfs: add error handling for scrub_workers_get() btrfs: cleanup noused initialization of dev in btrfs_end_bio() btrfs: qgroup: allow user to clear the limitation on qgroup | 11 July 2015, 17:26:34 UTC |
| 84e3e9d | Linus Torvalds | 11 July 2015, 17:20:36 UTC | Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Kevin Hilman: "A fairly random colletion of fixes based on -rc1 for OMAP, sunxi and prima2 as well as a few arm64-specific DT fixes. This series also includes a late to support a new Allwinner (sunxi) SoC, but since it's rather simple and isolated to the platform-specific code, it's included it for this -rc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG arm: dts: vexpress: add missing CCI PMU device node to TC2 arm: dts: vexpress: describe all PMUs in TC2 dts GICv3: Add ITS entry to THUNDER dts arm64: dts: Add poweroff button device node for APM X-Gene platform ARM: dts: am4372.dtsi: disable rfbi ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2 ARM: dts: am4372: Add emif node Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep" ARM: sunxi: Enable simplefb in the defconfig ARM: Remove deprecated symbol from defconfig files ARM: sunxi: Add Machine support for A33 ARM: sunxi: Introduce Allwinner H3 support Documentation: sunxi: Update Allwinner SoC documentation ARM: prima2: move to use REGMAP APIs for rtciobrg ARM: dts: atlas7: add pinctrl and gpio descriptions ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps memory: omap-gpmc: Fix parsing of devices | 11 July 2015, 17:20:36 UTC |
| c4d029f | Thomas Gleixner | 11 July 2015, 12:26:34 UTC | tick/broadcast: Prevent NULL pointer dereference Dan reported that the recent changes to the broadcast code introduced a potential NULL dereference. Add the proper check. Fixes: e0454311903d "tick/broadcast: Sanity check the shutdown of the local clock_event" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 11 July 2015, 12:26:34 UTC |
| b9243b5 | Linus Torvalds | 10 July 2015, 23:54:37 UTC | Merge branch 'parisc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "We have one important patch from Dave Anglin and myself which fixes PTE/TLB race conditions which caused random segmentation faults on our debian buildd servers, and one patch from Alex Ivanov which speeds up the graphical text console on the STI framebuffer driver" * 'parisc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results stifb: Implement hardware accelerated copyarea | 10 July 2015, 23:54:37 UTC |
| 3dbbbe0 | James Morris | 10 July 2015, 23:13:45 UTC | Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/selinux into for-linus2 | 10 July 2015, 23:13:45 UTC |
| 892e8ca | Stephen Smalley | 10 July 2015, 13:40:59 UTC | selinux: fix mprotect PROT_EXEC regression caused by mm change commit 66fc13039422ba7df2d01a8ee0873e4ef965b50b ("mm: shmem_zero_setup skip security check and lockdep conflict with XFS") caused a regression for SELinux by disabling any SELinux checking of mprotect PROT_EXEC on shared anonymous mappings. However, even before that regression, the checking on such mprotect PROT_EXEC calls was inconsistent with the checking on a mmap PROT_EXEC call for a shared anonymous mapping. On a mmap, the security hook is passed a NULL file and knows it is dealing with an anonymous mapping and therefore applies an execmem check and no file checks. On a mprotect, the security hook is passed a vma with a non-NULL vm_file (as this was set from the internally-created shmem file during mmap) and therefore applies the file-based execute check and no execmem check. Since the aforementioned commit now marks the shmem zero inode with the S_PRIVATE flag, the file checks are disabled and we have no checking at all on mprotect PROT_EXEC. Add a test to the mprotect hook logic for such private inodes, and apply an execmem check in that case. This makes the mmap and mprotect checking consistent for shared anonymous mappings, as well as for /dev/zero and ashmem. Cc: <stable@vger.kernel.org> # 4.1.x Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <pmoore@redhat.com> | 10 July 2015, 20:45:29 UTC |
| 1604f87 | Linus Torvalds | 10 July 2015, 19:49:56 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes and clean-up from Catalin Marinas: - ACPI fix when checking the validity of the GICC MADT subtable - handle debug exceptions in the el*_inv exception entries - remove pointless register assignment in two compat syscall wrappers - unnecessary include path - defconfig update * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: entry32: remove pointless register assignment arm64: entry: handle debug exceptions in el*_inv arm64: Keep the ARM64 Kconfig selects sorted ACPI / ARM64 : use the new BAD_MADT_GICC_ENTRY macro ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro arm64: defconfig: Add Ceva ahci to the defconfig arm64: remove another unnecessary libfdt include path | 10 July 2015, 19:49:56 UTC |
| 01ab605 | John David Anglin | 01 July 2015, 21:18:37 UTC | parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results The increased use of pdtlb/pitlb instructions seemed to increase the frequency of random segmentation faults building packages. Further, we had a number of cases where TLB inserts would repeatedly fail and all forward progress would stop. The Haskell ghc package caused a lot of trouble in this area. The final indication of a race in pte handling was this syslog entry on sibaris (C8000): swap_free: Unused swap offset entry 00000004 BUG: Bad page map in process mysqld pte:00000100 pmd:019bbec5 addr:00000000ec464000 vm_flags:00100073 anon_vma:0000000221023828 mapping: (null) index:ec464 CPU: 1 PID: 9176 Comm: mysqld Not tainted 4.0.0-2-parisc64-smp #1 Debian 4.0.5-1 Backtrace: [<0000000040173eb0>] show_stack+0x20/0x38 [<0000000040444424>] dump_stack+0x9c/0x110 [<00000000402a0d38>] print_bad_pte+0x1a8/0x278 [<00000000402a28b8>] unmap_single_vma+0x3d8/0x770 [<00000000402a4090>] zap_page_range+0xf0/0x198 [<00000000402ba2a4>] SyS_madvise+0x404/0x8c0 Note that the pte value is 0 except for the accessed bit 0x100. This bit shouldn't be set without the present bit. It should be noted that the madvise system call is probably a trigger for many of the random segmentation faults. In looking at the kernel code, I found the following problems: 1) The pte_clear define didn't take TLB lock when clearing a pte. 2) We didn't test pte present bit inside lock in exception support. 3) The pte and tlb locks needed to merged in order to ensure consistency between page table and TLB. This also has the effect of serializing TLB broadcasts on SMP systems. The attached change implements the above and a few other tweaks to try to improve performance. Based on the timing code, TLB purges are very slow (e.g., ~ 209 cycles per page on rp3440). Thus, I think it beneficial to test the split_tlb variable to avoid duplicate purges. Probably, all PA 2.0 machines have combined TLBs. I dropped using __flush_tlb_range in flush_tlb_mm as I realized all applications and most threads have a stack size that is too large to make this useful. I added some comments to this effect. Since implementing 1 through 3, I haven't had any random segmentation faults on mx3210 (rp3440) in about one week of building code and running as a Debian buildd. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Helge Deller <deller@gmx.de> | 10 July 2015, 19:47:47 UTC |
| cb908ed | Alex Ivanov | 15 June 2015, 05:50:45 UTC | stifb: Implement hardware accelerated copyarea This patch adds hardware assisted scrolling. The code is based upon the following investigation: https://parisc.wiki.kernel.org/index.php/NGLE#Blitter A simple 'time ls -la /usr/bin' test shows 1.6x speed increase over soft copy and 2.3x increase over FBINFO_READS_FAST (prefer soft copy over screen redraw) on Artist framebuffer. Signed-off-by: Alex Ivanov <lausgans@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> | 10 July 2015, 19:44:19 UTC |
| 3cdeb9d | Linus Torvalds | 10 July 2015, 19:16:59 UTC | Merge tag 'powerpc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - opal-prd mmap fix from Vaidy - set kernel taint for MCEs from Daniel - alignment exception description from Anton - ppc4xx_hsta_msi build fix from Daniel - opal-elog interrupt fix from Alistair - core_idle_state race fix from Shreyas - hv-24x7 lockdep fix from Sukadev - multiple cxl fixes from Daniel, Ian, Mikey & Maninder - update MAINTAINERS to point at shared tree * tag 'powerpc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: cxl: Check if afu is not null in cxl_slbia powerpc: Update MAINTAINERS to point at shared tree powerpc/perf/24x7: Fix lockdep warning cxl: Fix off by one error allowing subsequent mmap page to be accessed cxl: Fail mmap if requested mapping is larger than assigned problem state area cxl: Fix refcounting in kernel API powerpc/powernv: Fix race in updating core_idle_state powerpc/powernv: Fix opal-elog interrupt handler powerpc/ppc4xx_hsta_msi: Include ppc-pci.h to fix reference to hose_list powerpc: Add plain English description for alignment exception oopses cxl: Test the correct mmio space before unmapping powerpc: Set the correct kernel taint on machine check errors cxl/vphb.c: Use phb pointer after NULL check powerpc/powernv: Fix vma page prot flags in opal-prd driver | 10 July 2015, 19:16:59 UTC |
| f0f2c07 | Ross Zwisler | 10 July 2015, 17:06:14 UTC | nfit: add support for NVDIMM "latch" flag Add support in the NFIT BLK I/O path for the "latch" flag defined in the "Get Block NVDIMM Flags" _DSM function: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf This flag requires the driver to read back the command register after it is written in the block I/O path. This ensures that the hardware has fully processed the new command and moved the aperture appropriately. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 10 July 2015, 18:43:50 UTC |
| c2ad295 | Ross Zwisler | 10 July 2015, 17:06:13 UTC | nfit: update block I/O path to use PMEM API Update the nfit block I/O path to use the new PMEM API and to adhere to the read/write flows outlined in the "NVDIMM Block Window Driver Writer's Guide": http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf This includes adding support for targeted NVDIMM flushes called "flush hints" in the ACPI 6.0 specification: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf For performance and media durability the mapping for a BLK aperture is moved to a write-combining mapping which is consistent with memcpy_to_pmem() and wmb_blk(). Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 10 July 2015, 18:35:45 UTC |
| 9d27a87 | Dan Williams | 10 July 2015, 18:07:03 UTC | tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test In preparation for fixing the BLK path to properly use "directed pcommit" enable the unit test infrastructure to emit mock "flush" tables. Writes to these flush addresses trigger a memory controller to flush its internal buffers to persistent media, similar to the x86 "pcommit" instruction. Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 10 July 2015, 18:07:03 UTC |
| f7ec836 | Dan Williams | 10 July 2015, 17:06:12 UTC | tools/testing/nvdimm: fix return code for unimplemented commands The implementation for the new "DIMM Flags" DSM relies on the -ENOTTY return code to indicate that the flags are unimplimented and to fall back to a safe default. As is the -ENXIO error code erroneoously indicates to fail enabling a BLK region. Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 10 July 2015, 17:50:50 UTC |
| b1b2e62 | Dan Williams | 10 July 2015, 17:06:11 UTC | tools/testing/nvdimm: mock ioremap_wt In the 4.2-rc1 merge the default_memremap_pmem() implementation switched from ioremap_nocache() to ioremap_wt(). Add it to the list of mocked routines to restore the ability to run the unit tests. Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 10 July 2015, 17:50:50 UTC |
| b864bc1 | Ross Zwisler | 10 July 2015, 17:06:10 UTC | pmem: add maintainer for include/linux/pmem.h The file include/linux/pmem.h was recently created to hold the PMEM API, and is logically part of the PMEM driver. Add an entry for this file to MAINTAINERS. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 10 July 2015, 17:50:50 UTC |
| dbf3c37 | Dmitry Torokhov | 10 July 2015, 17:11:07 UTC | Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" This reverts commit 63c4fda3c0bb841b1aad1298fc7fe94058fc79f8 as it causes issues with detecting 3-finger taps. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100481 Cc: stable@vger.kernel.org Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> | 10 July 2015, 17:11:07 UTC |
| ad2daa8 | Mark Rutland | 10 July 2015, 14:46:32 UTC | arm64: entry32: remove pointless register assignment We currently set x27 in compat_sys_sigreturn_wrapper and compat_sys_rt_sigreturn_wrapper, similarly to what we do with r8/why on 32-bit ARM, in an attempt to prevent sigreturns from being restarted. However, on arm64 we have always used pt_regs::syscallno for syscall restarting (for both native and compat tasks), and x27 is never inspected again before being overwritten in kernel_exit. This patch removes the pointless register assignments. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 10 July 2015, 15:47:13 UTC |
| 2d28b63 | Dave Airlie | 10 July 2015, 05:59:35 UTC | Merge tag 'omapdrm-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes omapdrm fixes for 4.2 Small fixes for omapdrm, including: * Fix packed 24 bit color formats * Ensure the planes are inside the crtc * Handle out-of-dma-memory error * tag 'omapdrm-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: drm/omap: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN drm/omap: fix align_pitch() for 24 bits per pixel drm/omap: fix omap_gem_put_paddr() error handling drm/omap: fix omap_framebuffer_unpin() error handling drm/omap: increase DMM transaction timeout drm/omap: check that plane is inside crtc drm/omap: return error if dma_alloc_writecombine fails | 10 July 2015, 05:59:35 UTC |
| 59e7a16 | Dave Airlie | 10 July 2015, 05:58:43 UTC | Merge tag 'drm-intel-fixes-2015-07-09' of git://anongit.freedesktop.org/drm-intel into drm-fixes Pile of fixes for either 4.2 issues or cc: stable. This should fix the 2nd kind of WARNING Linus's been seeing, please ask him to scream if that's not the case. * tag 'drm-intel-fixes-2015-07-09' of git://anongit.freedesktop.org/drm-intel: Revert "drm/i915: Allocate context objects from stolen" drm/i915: Declare the swizzling unknown for L-shaped configurations drm/i915: Use crtc_state->active in primary check_plane func drm/i915: Check crtc->active in intel_crtc_disable_planes drm/i915: Restore all GGTT VMAs on resume drm/i915/chv: fix HW readout of the port PLL fractional divider | 10 July 2015, 05:58:43 UTC |
| 008b3f1 | Dave Airlie | 10 July 2015, 05:56:19 UTC | Merge tag 'drm-amdkfd-fixes-2015-07-09' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes A single fix so far for 4.2: - checking a pointer is not null before using it * tag 'drm-amdkfd-fixes-2015-07-09' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: validate pdd where it acquired first | 10 July 2015, 05:56:19 UTC |
| 9d5715f | Dave Airlie | 10 July 2015, 05:55:48 UTC | Merge branch 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux into drm-fixes radeon and amdgpu fixes for 4.2. All over the place: - fix cursor corruption on resume and re-enable no VT switch on suspend - vblank fixes - fix gpuvm error messages - misc other fixes * 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: disable vce init on cayman (v2) drm/amdgpu: fix timeout calculation drm/radeon: check if BO_VA is set before adding it to the invalidation list drm/radeon: allways add the VM clear duplicate Revert "Revert "drm/radeon: dont switch vt on suspend"" drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor() drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2) drm/radeon: Clean up reference counting and pinning of the cursor BOs drm/radeon: fix underflow in r600_cp_dispatch_texture() drm/radeon: default to 2048 MB GART size on SI+ drm/radeon: fix HDP flushing drm/radeon: use RCU query for GEM_BUSY syscall drm/amdgpu: Handle irqs only based on irq ring, not irq status regs. drm/radeon: Handle irqs only based on irq ring, not irq status regs. | 10 July 2015, 05:55:48 UTC |
| 2c069a1 | Daniel Axtens | 09 July 2015, 23:04:25 UTC | cxl: Check if afu is not null in cxl_slbia The pointer to an AFU in the adapter's list of AFUs can be null if we're in the process of removing AFUs. The afu_list_lock doesn't guard against this. Say we have 2 slices, and we're in the process of removing cxl. - We remove the AFUs in order (see cxl_remove). In cxl_remove_afu for AFU 0, we take the lock, set adapter->afu[0] = NULL, and release the lock. - Then we get an slbia. In cxl_slbia we take the lock, and set afu = adapter->afu[0], which is NULL. - Therefore our attempt to check afu->enabled will blow up. Therefore, check if afu is a null pointer before dereferencing it. Cc: stable@vger.kernel.org Signed-off-by: Daniel Axtens <dja@axtens.net> Acked-by: Michael Neuling <mikey@neuling.org> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 10 July 2015, 01:44:25 UTC |
| 8dfbc0a | Kevin Hilman | 09 July 2015, 22:38:16 UTC | Merge tag 'omap-for-v4.2/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v4.2-rc1" from Tony Lindgren: Minor fixes for omaps against v4.2-rc1. Mostly just minor dts changes except for a GPMC fix to not use names for probing devices. Also a one liner clean-up to remove unecessary return from a void function. The summary for the changes being: - Fix probe for GPMC devices by reoving limitations based on device name - Remove unnecessary return from a void function - Revert beaglebone RTC sleep fix, we now have a better fix merged - Add am4372 EMIF node to fix a warning - Add am57xx-beagle-x15 power supply to fix USB2 if USB1 is disabled - Disable rfbi for am4372 as it does not have a driver * tag 'omap-for-v4.2/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372.dtsi: disable rfbi ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2 ARM: dts: am4372: Add emif node Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep" ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps memory: omap-gpmc: Fix parsing of devices | 09 July 2015, 22:38:16 UTC |
| d024bae | Kevin Hilman | 09 July 2015, 22:08:44 UTC | Merge tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner late changes for 4.2" from Maxime Ripard: Allwinner late changes for 4.2 A bunch of defconfig changes, and some patches to make the Allwinner H3 and A33 boot properly. * tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sunxi: Enable simplefb in the defconfig ARM: Remove deprecated symbol from defconfig files ARM: sunxi: Add Machine support for A33 ARM: sunxi: Introduce Allwinner H3 support Documentation: sunxi: Update Allwinner SoC documentation | 09 July 2015, 22:08:44 UTC |
| c4b5fd3 | Linus Torvalds | 09 July 2015, 20:35:39 UTC | Merge branch 'hpfs-patches' (patches from Mikulas Patocka) Merge hpfs updates from Mikulas Patocka. Mainly fstrim support, with some minor other cleanups. These were actually sent during the merge window, but I wanted to wait for the FSTRIM compat handling cleanup before applying them. Mikulas sent that earlier today. * emailed patches from Mikulas Patocka <mikulas@twibright.com>: hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead hpfs: kstrdup() out of memory handling hpfs: Remove unessary cast hpfs: add fstrim support | 09 July 2015, 20:35:39 UTC |
| a28e4b2 | Joe Perches | 27 March 2015, 03:47:10 UTC | hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead Removing unnecessary static buffers is good. Use the vsprintf %pV extension instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Cc: stable@vger.kernel.org # v2.6.36+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 20:35:31 UTC |
| ce65761 | Sanidhya Kashyap | 21 March 2015, 16:57:50 UTC | hpfs: kstrdup() out of memory handling There is a possibility of nothing being allocated to the new_opts in case of memory pressure, therefore return ENOMEM for such case. Signed-off-by: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 20:35:31 UTC |
| d7b0409 | Firo Yang | 23 April 2015, 09:28:45 UTC | hpfs: Remove unessary cast Avoid a pointless kmem_cache_alloc() return value cast in fs/hpfs/super.c::hpfs_alloc_inode() Signed-off-by: Firo Yang <firogm@gmail.com> Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 20:35:31 UTC |
| a27b5b9 | Mikulas Patocka | 28 June 2015, 13:16:57 UTC | hpfs: add fstrim support This patch adds support for fstrim to the HPFS filesystem. Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 20:35:30 UTC |
| 4f001fd | Pantelis Antoniou | 24 January 2015, 07:16:29 UTC | i2c: Mark instantiated device nodes with OF_POPULATE Mark (and unmark) device nodes with the POPULATE flag as appropriate. This is required to avoid multi probing when using I2C and device overlays containing a mux. This patch is also more careful with the release of the adapter device which caused a deadlock with muxes, and does not break the build on !OF since the node flag accessors are not defined then. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 09 July 2015, 20:25:54 UTC |
| eb8173e | Axel Lin | 30 June 2015, 03:41:58 UTC | i2c: jz4780: Fix return value if probe fails Current code returns 0 if fails to read clock-frequency DT property, fix it. Also add checking return value of clk_prepare_enable and propagate return value of devm_request_irq. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 09 July 2015, 20:17:31 UTC |
| 4c0a9f7 | Linus Torvalds | 09 July 2015, 20:13:11 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "There is a fix for CephFS and RBD when used within containers/namespaces, and a fix for the address learning the client is supposed to do when initially talking to the Ceph cluster. There are also two patches updating MAINTAINERS. One breaks out the common Ceph code shared by fs/ceph and drivers/block/rbd.c into a separate entry with the appropriate maintainers listed. The second adds a second reference to the github tree where the Ceph client development takes place (before it is pushed to korg and then to you). The goal here is to move closer to a situation where Ilya Dryomov or one of the other maintainers can push things to you if I am unavailable. Ilya has done most of the work preparing branches for upstream recently; you should not be surprised to hear from him if I am trapped in some internet-less wasteland or hit by a bus or something. In the meantime, we'll work on getting him added to the kernel web of trust" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: MAINTAINERS: add secondary tree for ceph modules MAINTAINERS: update ceph entries libceph: treat sockaddr_storage with uninitialized family as blank libceph: enable ceph in a non-default network namespace | 09 July 2015, 20:13:11 UTC |
| 7249481 | Axel Lin | 30 June 2015, 03:08:46 UTC | i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error path Free requested mailbox channel before return error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 09 July 2015, 20:13:10 UTC |
| fc0a1f0 | Geert Uytterhoeven | 26 June 2015, 12:12:10 UTC | i2c: I2C_MT65XX should depend on HAS_DMA If NO_DMA=y: ERROR: "dma_unmap_single" [drivers/i2c/busses/i2c-mt65xx.ko] undefined! ERROR: "dma_mapping_error" [drivers/i2c/busses/i2c-mt65xx.ko] undefined! ERROR: "dma_map_single" [drivers/i2c/busses/i2c-mt65xx.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 09 July 2015, 20:10:20 UTC |
| 9abea2d | Mikulas Patocka | 09 July 2015, 16:05:15 UTC | ioctl_compat: handle FITRIM The FITRIM ioctl has the same arguments on 32-bit and 64-bit architectures, so we can add it to the list of compatible ioctls and drop it from compat_ioctl method of various filesystems. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ted Ts'o <tytso@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 18:42:21 UTC |
| 3324603 | Paul Moore | 09 July 2015, 18:20:36 UTC | selinux: don't waste ebitmap space when importing NetLabel categories At present we don't create efficient ebitmaps when importing NetLabel category bitmaps. This can present a problem when comparing ebitmaps since ebitmap_cmp() is very strict about these things and considers these wasteful ebitmaps not equal when compared to their more efficient counterparts, even if their values are the same. This isn't likely to cause problems on 64-bit systems due to a bit of luck on how NetLabel/CIPSO works and the default ebitmap size, but it can be a problem on 32-bit systems. This patch fixes this problem by being a bit more intelligent when importing NetLabel category bitmaps by skipping over empty sections which should result in a nice, efficient ebitmap. Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Paul Moore <pmoore@redhat.com> | 09 July 2015, 18:20:36 UTC |
| 6f95772 | Linus Torvalds | 09 July 2015, 18:20:01 UTC | Fix firmware loader uevent buffer NULL pointer dereference The firmware class uevent function accessed the "fw_priv->buf" buffer without the proper locking and testing for NULL. This is an old bug (looks like it goes back to 2012 and commit 1244691c73b2: "firmware loader: introduce firmware_buf"), but for some reason it's triggering only now in 4.2-rc1. Shuah Khan is trying to bisect what it is that causes this to trigger more easily, but in the meantime let's just fix the bug since others are hitting it too (at least Ingo reports having seen it as well). Reported-and-tested-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Ming Lei <ming.lei@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 18:20:01 UTC |
| 6b7339f | Kirill A. Shutemov | 06 July 2015, 20:18:37 UTC | mm: avoid setting up anonymous pages into file mapping Reading page fault handler code I've noticed that under right circumstances kernel would map anonymous pages into file mappings: if the VMA doesn't have vm_ops->fault() and the VMA wasn't fully populated on ->mmap(), kernel would handle page fault to not populated pte with do_anonymous_page(). Let's change page fault handler to use do_anonymous_page() only on anonymous VMA (->vm_ops == NULL) and make sure that the VMA is not shared. For file mappings without vm_ops->fault() or shred VMA without vm_ops, page fault on pte_none() entry would lead to SIGBUS. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 July 2015, 18:12:48 UTC |
| 6e67b7a | Sage Weil | 09 July 2015, 15:47:37 UTC | MAINTAINERS: add secondary tree for ceph modules The Ceph kernel code is primarily developed in the github tree, and only pushed to the korg tree before going to Linus. If Sage is unavailable and another maintainer needs to push something upstream, pull requests may originate from the github tree instead of Sage's korg tree. Signed-off-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 09 July 2015, 17:37:39 UTC |
| 398ecff | Sage Weil | 09 July 2015, 15:46:14 UTC | MAINTAINERS: update ceph entries - The Ceph common code is used by both fs/ceph and drivers/block/rbd. Add a separate maintainers entry. - Add Ilya as libceph maintainer and cephfs submaintainer. - Attribute Documentation/ABI/testing/sysfs-bus-rbd to rbd. - ceph-devel@vger.kernel.org should be L, not M in rbd entry. Signed-off-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 09 July 2015, 17:30:34 UTC |
| c44bd69 | Ilya Dryomov | 09 July 2015, 10:57:52 UTC | libceph: treat sockaddr_storage with uninitialized family as blank addr_is_blank() should return true if family is neither AF_INET nor AF_INET6. This is what its counterpart entity_addr_t::is_blank_ip() is doing and it is the right thing to do: in process_banner() we check if our address is blank and if it is "learn" it from our peer. As it is, we never learn our address and always send out a blank one. This goes way back to ceph.git commit dd732cbfc1c9 ("use sockaddr_storage; and some ipv6 support groundwork") from 2009. While at at, do not open-code ipv6_addr_any() and use INADDR_ANY constant instead of 0. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com> | 09 July 2015, 17:30:34 UTC |
| 757856d | Ilya Dryomov | 25 June 2015, 14:47:45 UTC | libceph: enable ceph in a non-default network namespace Grab a reference on a network namespace of the 'rbd map' (in case of rbd) or 'mount' (in case of ceph) process and use that to open sockets instead of always using init_net and bailing if network namespace is anything but init_net. Be careful to not share struct ceph_client instances between different namespaces and don't add any code in the !CONFIG_NET_NS case. This is based on a patch from Hong Zhiguo <zhiguohong@tencent.com>. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com> | 09 July 2015, 17:30:34 UTC |
| 355c822 | Alex Deucher | 08 July 2015, 16:58:20 UTC | drm/radeon: disable vce init on cayman (v2) Cayman does not have vce. There were a few places in the shared cayman/TV code where we were trying to do vce stuff. v2: remove -ENOENT check Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 July 2015, 15:40:12 UTC |
| 0f11770 | Christian König | 08 July 2015, 14:58:48 UTC | drm/amdgpu: fix timeout calculation Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> | 09 July 2015, 15:40:11 UTC |
| dbedff0 | Christian König | 08 July 2015, 07:56:14 UTC | drm/radeon: check if BO_VA is set before adding it to the invalidation list Otherwise we try to clear BO_VAs without an address. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=91141 Signed-off-by: Christian König <christian.koenig@amd.com> Test-by: hadack@gmx.de Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 July 2015, 15:40:10 UTC |
| eb99070 | Christian König | 08 July 2015, 07:56:13 UTC | drm/radeon: allways add the VM clear duplicate We need to allways add the VM clear duplicate of the BO_VA, no matter what the old status was. Signed-off-by: Christian König <christian.koenig@amd.com> Test-by: hadack@gmx.de Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 July 2015, 15:40:10 UTC |
| d57c0ed | Alex Deucher | 08 July 2015, 18:08:12 UTC | Revert "Revert "drm/radeon: dont switch vt on suspend"" This reverts commit ac9134906b3f5c2b45dc80dab0fee792bd516d52. We've fixed the underlying problem with cursors, so re-enable this. | 09 July 2015, 15:40:09 UTC |
| 8991668 | Michel Dänzer | 07 July 2015, 07:27:30 UTC | drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor() Reviewed-by: Grigori Goronzy <greg@chown.ath.cx> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 July 2015, 15:40:02 UTC |
| f3cbb17 | Grigori Goronzy | 07 July 2015, 07:27:29 UTC | drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2) Everything is evicted from VRAM before suspend, so we need to make sure all BOs are unpinned and re-pinned after resume. Fixes broken mouse cursor after resume introduced by commit b9729b17. [Michel Dänzer: Add pinning BOs on resume] v2: [Alex Deucher: merge cursor unpin into fb unpin loop] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100541 Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 July 2015, 15:40:01 UTC |
| cd404af | Michel Dänzer | 07 July 2015, 07:27:28 UTC | drm/radeon: Clean up reference counting and pinning of the cursor BOs Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in radeon_crtc_cursor_set2, and use radeon_crtc->cursor_addr in radeon_set_cursor. This fixes radeon_cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Cc: stable@vger.kernel.org Reviewed-by: Grigori Goronzy <greg@chown.ath.cx> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 09 July 2015, 15:39:40 UTC |
| a0f6744 | Maninder Singh | 09 July 2015, 09:11:53 UTC | drm/amdkfd: validate pdd where it acquired first Currently pdd is validate after dereferencing it, which is not correct, Thus validate pdd before its first use. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> | 09 July 2015, 10:27:52 UTC |
| 1f6823f | Thomas Gleixner | 09 July 2015, 08:51:46 UTC | time: Get rid of do_posix_clock_monotonic_gettime All users gone. Remove it before we get another one. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 09 July 2015, 08:51:46 UTC |
| 0ec62aa | Thomas Gleixner | 09 July 2015, 08:51:46 UTC | cris: Replace do_posix_clock_monotonic_gettime() ktime_get_ts() is the proper interface today. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jesper Nilsson <jesper.nilsson@axis.com> | 09 July 2015, 08:51:46 UTC |
| 5261392 | Ville Syrjälä | 29 June 2015, 17:28:35 UTC | Revert "drm/i915: Allocate context objects from stolen" Stolen gets trashed during hibernation, so storing contexts there is not a very good idea. On my IVB machines this leads to a totally dead GPU on resume. A reboot is required to resurrect it. So let's not store contexts where they will get trampled. This reverts commit 149c86e74fe44dcbac5e9f8d145c5fbc5dc21261. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 09 July 2015, 07:40:16 UTC |
| 19ee835 | Chris Wilson | 29 June 2015, 13:01:19 UTC | drm/i915: Declare the swizzling unknown for L-shaped configurations The old style of memory interleaving swizzled upto the end of the first even bank of memory, and then used the remainder as unswizzled on the unpaired bank - i.e. swizzling is not constant for all memory. This causes problems when we try to migrate memory and so the kernel prevents migration at all when we detect L-shaped inconsistent swizzling. However, this issue also extends to userspace who try to manually detile into memory as the swizzling for an individual page is unknown (it depends on its physical address only known to the kernel), userspace cannot correctly swizzle objects. v2: Mark the global swizzling as unknown rather than adjust the value reported to userspace. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 09 July 2015, 07:36:44 UTC |
| 883a2df | Linus Torvalds | 09 July 2015, 00:34:51 UTC | Merge tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are fixes on top of the previous PM+ACPI pull requests (including one fix for a 4.1 regression) and two commits adding _CLS-based device enumeration support to the ACPI core and the ATA subsystem that waited for the latest ACPICA changes to be merged. Specifics: - Fix for an ACPI resources management regression introduced during the 4.1 cycle (that unfortunately went into -stable) effectively reverting the bad commit along with the recent fixups on top of it and using an alternative approach to address the underlying issue (Rafael J Wysocki). - Fix for a memory leak and an incorrect return value in an error code path in the ACPI LPSS (Low-Power Subsystem) driver (Rafael J Wysocki). - Fix for a leftover dangling pointer in an error code path in the new wakeup IRQ support code (Rafael J Wysocki). - Fix to prevent infinite loops (due to errors in other places) from happening in the core generic PM domains support code (Geert Uytterhoeven). - Hibernation documentation update/clarification (Uwe Geuder). - Support for _CLS-based device enumeration in the ACPI core and in the ATA subsystem (Suravee Suthikulpanit)" * tag 'pm+acpi-4.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / wakeirq: Avoid setting power.wakeirq too hastily ata: ahci_platform: Add ACPI _CLS matching ACPI / scan: Add support for ACPI _CLS device matching PM / hibernate: clarify resume documentation PM / Domains: Avoid infinite loops in attach/detach code ACPI / LPSS: Fix up acpi_lpss_create_device() ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage | 09 July 2015, 00:34:51 UTC |
| 331c584 | Linus Torvalds | 09 July 2015, 00:15:55 UTC | Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile fix from Chris Metcalf: "This fix eliminates a "section mismatch" warning caused by the new __ex_table checking code in modpost" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: modpost: work correctly with tile coldtext sections | 09 July 2015, 00:15:55 UTC |
| 9d993cc | Linus Torvalds | 09 July 2015, 00:14:54 UTC | Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module fix from Rusty Russell: "Single fix: missing rbtree removal in the module load failure path. Easy to trigger with bad params. Thanks to Peter Zijlstra and Arthur Marsh for going around on this one" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Fix load_module() error path | 09 July 2015, 00:14:54 UTC |
| 673c2c3 | Chris Metcalf | 08 July 2015, 21:07:41 UTC | modpost: work correctly with tile coldtext sections The tilegx and tilepro compilers use .coldtext for their unlikely executed text section name, so an __attribute__((cold)) function will (when compiled with higher optimization levels) land in the .coldtext section. Modify modpost to add .coldtext to the set of OTHER_TEXT_SECTIONS so we don't get warnings about referencing such a section in an __ex_table block, and then also modify arch/tile/lib/memcpy_user_64.c so that it uses plain ".coldtext" instead of ".coldtext.memcpy". The latter naming is a relic of an earlier use of -ffunction-sections, which we no longer use by default. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> | 08 July 2015, 22:53:49 UTC |
| 9ccd608 | Kristina Martsenko | 01 July 2015, 12:36:03 UTC | arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG Add a DTS file for the MP2 Cortex-A53 Soft Macrocell Model implemented on a LogicTile Express 20MG (V2F-1XV7) daughterboard. This is based on the version that's currently available from the ARM DTS repository [1]. [1] git://linux-arm.org/arm-dts.git Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> | 08 July 2015, 21:44:56 UTC |
| 3adf7aa | Sudeep Holla | 01 July 2015, 12:36:02 UTC | arm: dts: vexpress: add missing CCI PMU device node to TC2 The CCI device node was added to vexpress CA15_A7(i.e. TC2) much before the CCI PMU support and binding was added. This patch adds the missing PMU node so that CCI PMUs can be used on TC2. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> | 08 July 2015, 21:44:55 UTC |
| 4d44f2a | Mark Rutland | 01 July 2015, 12:36:01 UTC | arm: dts: vexpress: describe all PMUs in TC2 dts The dts for the CoreTile Express A15x2 A7x3 (TC2) only describes the PMUs of the Cortex-A15 CPUs, and not the Cortex-A7 CPUs. Now that we have a mechanism for describing disparate PMUs and their interrupts in device tree, this patch makes use of these to describe the PMUs for all CPUs in the system. For consistency, the existing A15 PMU interrupt-affinity property is reflowed across two lines. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> | 08 July 2015, 21:44:55 UTC |
| 758556b | Peter Zijlstra | 08 July 2015, 21:18:06 UTC | module: Fix load_module() error path The load_module() error path frees a module but forgot to take it out of the mod_tree, leaving a dangling entry in the tree, causing havoc. Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: Arthur Marsh <arthur.marsh@internode.on.net> Tested-by: Arthur Marsh <arthur.marsh@internode.on.net> Fixes: 93c2e105f6bc ("module: Optimize __module_address() using a latched RB-tree") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> | 08 July 2015, 21:27:12 UTC |
| efc5120 | Tirumalesh Chalamarla | 26 June 2015, 19:12:23 UTC | GICv3: Add ITS entry to THUNDER dts The PCIe host controller uses MSIs provided by GICv3 ITS. Enable it on Thunder SoCs by adding an entry to DT. Signed-off-by: Tirumalesh Chalamarla <tchalamarla@cavium.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> | 08 July 2015, 21:24:57 UTC |
| 8dfaf05 | Kevin Hilman | 08 July 2015, 21:20:12 UTC | Merge tag 'sirf-iobrg2regmap-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into fixes Merge "CSR SiRFSoC rtc iobrg move to regmap for 4.2" from Barry Song: move CSR rtc iobrg read/write API to be regmap this moves to general APIs, and all drivers will be changed based on it. * tag 'sirf-iobrg2regmap-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: prima2: move to use REGMAP APIs for rtciobrg | 08 July 2015, 21:20:12 UTC |
| b649125 | Kevin Hilman | 08 July 2015, 21:18:45 UTC | Merge tag 'atlas7-pinctrl-dts-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into fixes Merge "CSR atlas7 pinctrl descriptions for 4.2" from Barry Song: add atlas7 pinctrl dts stuff add atlas7 pin groups and gpio/pin mapping descriptions * tag 'atlas7-pinctrl-dts-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: dts: atlas7: add pinctrl and gpio descriptions | 08 July 2015, 21:18:45 UTC |
| 3d8cc14 | Y Vo | 26 June 2015, 08:01:47 UTC | arm64: dts: Add poweroff button device node for APM X-Gene platform This patch adds poweroff button device node to support poweroff feature on APM X-Gene Mustang platform. Signed-off-by: Y Vo <yvo@apm.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> | 08 July 2015, 21:09:18 UTC |
| 1b42804 | Mark Rutland | 07 July 2015, 17:00:49 UTC | arm64: entry: handle debug exceptions in el*_inv Currently we enable debug exceptions before reading ESR_EL1 in both el0_inv and el1_inv. If a debug exception is taken before we read ESR_EL1, the value will have been corrupted. As el*_inv is typically fatal, an intervening debug exception results in misleading debug information being logged to the console, but is not otherwise harmful. As with the other entry paths, we can use the ESR_EL1 value stashed earlier in the exception entry (in x25 for el0_sync{,_compat}, and x1 for el1_sync), giving us better error reporting in this case. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 08 July 2015, 17:03:48 UTC |
| 866a920 | Dan Carpenter | 03 July 2015, 08:54:28 UTC | drm/radeon: fix underflow in r600_cp_dispatch_texture() The "if (pass_size > buf->total)" can underflow so I have changed the type of size and pass_size to unsigned to avoid this problem. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 July 2015, 16:41:43 UTC |
| 5e3c4f9 | Grigori Goronzy | 02 July 2015, 23:54:12 UTC | drm/radeon: default to 2048 MB GART size on SI+ Newer ASICs have more VRAM on average and allocating more GART as well can have advantages. Also see commit edcd26e8. Ideally, we should scale GART size based on actual VRAM size, but that requires significant restructuring of initialization. v2: extract small helper, apply to error paths Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 July 2015, 16:41:41 UTC |
| 54e0398 | Grigori Goronzy | 02 July 2015, 23:54:11 UTC | drm/radeon: fix HDP flushing This was regressed by commit 39e7f6f8, although I don't know of any actual issues caused by it. The storage domain is read without TTM locking now, but the lock never helped to prevent any races. Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 July 2015, 16:41:40 UTC |
| 828202a | Grigori Goronzy | 02 July 2015, 23:54:10 UTC | drm/radeon: use RCU query for GEM_BUSY syscall We don't need to call the (expensive) radeon_bo_wait, checking the fences via RCU is much faster. The reservation done by radeon_bo_wait does not save us from any race conditions. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 July 2015, 16:41:39 UTC |
| bd83314 | Mario Kleiner | 03 July 2015, 04:03:07 UTC | drm/amdgpu: Handle irqs only based on irq ring, not irq status regs. This is a translation of the patch ... "drm/radeon: Handle irqs only based on irq ring, not irq status regs." ... for the vblank irq handling, to fix the same problem described in that patch on the new driver. Only compile tested due to lack of suitable hw. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> CC: Michel Dänzer <michel.daenzer@amd.com> CC: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 July 2015, 16:41:37 UTC |
| 07f18f0 | Mario Kleiner | 03 July 2015, 04:03:06 UTC | drm/radeon: Handle irqs only based on irq ring, not irq status regs. Trying to resolve issues with missed vblanks and impossible values inside delivered kms pageflip completion events showed that radeon's irq handling sometimes doesn't handle valid irqs, but silently skips them. This was observed for vblank interrupts. Although those irqs have corresponding events queued in the gpu's irq ring at time of interrupt, and therefore the corresponding handling code gets triggered by these events, the handling code sometimes silently skipped processing the irq. The reason for those skips is that the handling code double-checks for each irq event if the corresponding irq status bits in the irq status registers are set. Sometimes those bits are not set at time of check for valid irqs, maybe due to some hardware race on some setups? The problem only seems to happen on some machine + card combos sometimes, e.g., never happened during my testing of different PC cards of the DCE-2/3/4 generation a year ago, but happens consistently now on two different Apple Mac cards (RV730, DCE-3, Apple iMac and Evergreen JUNIPER, DCE-4 in a Apple MacPro). It also doesn't happen at each interrupt but only occassionally every couple of hundred or thousand vblank interrupts. This results in XOrg warning messages like "[ 7084.472] (WW) RADEON(0): radeon_dri2_flip_event_handler: Pageflip completion event has impossible msc 420120 < target_msc 420121" as well as skipped frames and problems for applications that use kms pageflip events or vblank events, e.g., users of DRI2 and DRI3/Present, Waylands Weston compositor, etc. See also https://bugs.freedesktop.org/show_bug.cgi?id=85203 After some talking to Alex and Michel, we decided to fix this by turning the double-check for asserted irq status bits into a warning. Whenever a irq event is queued in the IH ring, always execute the corresponding interrupt handler. Still check the irq status bits, but only to log a DRM_DEBUG message on a mismatch. This fixed the problems reliably on both previously failing cards, RV-730 dual-head tested on both crtcs (pipes D1 and D2) and a triple-output Juniper HD-5770 card tested on all three available crtcs (D1/D2/D3). The r600 and evergreen irq handling is therefore tested, but the cik an si handling is only compile tested due to lack of hw. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> CC: Michel Dänzer <michel.daenzer@amd.com> CC: Alex Deucher <alexander.deucher@amd.com> CC: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 08 July 2015, 16:41:36 UTC |
| 45820c2 | Linus Torvalds | 08 July 2015, 16:33:38 UTC | Fix broken audit tests for exec arg len The "fix" in commit 0b08c5e5944 ("audit: Fix check of return value of strnlen_user()") didn't fix anything, it broke things. As reported by Steven Rostedt: "Yes, strnlen_user() returns 0 on fault, but if you look at what len is set to, than you would notice that on fault len would be -1" because we just subtracted one from the return value. So testing against 0 doesn't test for a fault condition, it tests against a perfectly valid empty string. Also fix up the usual braindamage wrt using WARN_ON() inside a conditional - make it part of the conditional and remove the explicit unlikely() (which is already part of the WARN_ON*() logic, exactly so that you don't have to write unreadable code. Reported-and-tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Cc: Paul Moore <pmoore@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 July 2015, 16:33:38 UTC |
| dec4f79 | Daniel Vetter | 07 July 2015, 09:15:47 UTC | drm/i915: Use crtc_state->active in primary check_plane func Since commit 8c7b5ccb729870e606321b3703e2c2e698c49a95 Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Date: Tue Apr 21 17:13:19 2015 +0300 drm/i915: Use atomic helpers for computing changed flags we compute the plane state for a modeset before actually committing any changes, which means crtc->active won't be correct yet. Looking at future work in the modeset conversion targetting 4.3 the only places where crtc_state->active isn't accurate is when disabling other CRTCs than the one the modeset is for (when stealing connectors). Which isn't the case here. And that's also confirmed by an audit, we do unconditionally update crtc_state->active for the current pipe. We also don't need to update any other plane check functions since we only ever add the primary state to the modeset update right now. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 08 July 2015, 14:42:25 UTC |
| 63fef06 | Daniel Vetter | 07 July 2015, 09:15:46 UTC | drm/i915: Check crtc->active in intel_crtc_disable_planes This was lost in commit ce22dba92de22e951dee2ff89937a39754d2dd91 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Tue Apr 21 17:12:56 2015 +0300 drm/i915: Move toggling planes out of crtc enable/disable. and we still need that crtc->active check since the overall modeset flow doesn't yet take dpms state into account properly. Fixes WARNING backtraces on at least bdw/hsw due to the ips disabling code being upset about being run on a switched-off pipe. We don't need a corresponding change on the enable side since with the old setCrtc semantics we always force-enable the pipe after a modeset. And the dpms function intel_crtc_control already checks for ->active. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 08 July 2015, 14:42:25 UTC |
| a899418 | Thomas Gleixner | 05 July 2015, 17:12:30 UTC | hotplug: Prevent alloc/free of irq descriptors during cpu up/down When a cpu goes up some architectures (e.g. x86) have to walk the irq space to set up the vector space for the cpu. While this needs extra protection at the architecture level we can avoid a few race conditions by preventing the concurrent allocation/free of irq descriptors and the associated data. When a cpu goes down it moves the interrupts which are targeted to this cpu away by reassigning the affinities. While this happens interrupts can be allocated and freed, which opens a can of race conditions in the code which reassignes the affinities because interrupt descriptors might be freed underneath. Example: CPU1 CPU2 cpu_up/down irq_desc = irq_to_desc(irq); remove_from_radix_tree(desc); raw_spin_lock(&desc->lock); free(desc); We could protect the irq descriptors with RCU, but that would require a full tree change of all accesses to interrupt descriptors. But fortunately these kind of race conditions are rather limited to a few things like cpu hotplug. The normal setup/teardown is very well serialized. So the simpler and obvious solution is: Prevent allocation and freeing of interrupt descriptors accross cpu hotplug. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.063519515@linutronix.de | 08 July 2015, 09:32:25 UTC |
| 2c3d998 | Tvrtko Ursulin | 06 July 2015, 14:15:01 UTC | drm/i915: Restore all GGTT VMAs on resume When rotated and partial views were added no one spotted the resume path which assumes only one GGTT VMA per object and hence is now skipping rebind of alternative views. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> | 08 July 2015, 09:28:47 UTC |
| 69711ca | Sébastien Hinderer | 07 July 2015, 22:02:01 UTC | x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text Signed-off-by: Sébastien Hinderer <Sebastien.Hinderer@ens-lyon.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Samuel Thibault <Samuel.Thibault@ens-lyon.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 08 July 2015, 09:10:56 UTC |
| 9958084 | Michael Ellerman | 07 July 2015, 09:16:23 UTC | powerpc: Update MAINTAINERS to point at shared tree Now that we have a shared powerpc tree on kernel.org, point folks at that as the primary place to look for powerpc stuff. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 08 July 2015, 05:18:21 UTC |
| 442053e | Sukadev Bhattiprolu | 07 July 2015, 16:21:10 UTC | powerpc/perf/24x7: Fix lockdep warning The sysfs attributes for the 24x7 counters are dynamically allocated. Initialize the attributes using sysfs_attr_init() to fix following warning which occurs when CONFIG_DEBUG_LOCK_VMALLOC=y. [ 0.346249] audit: initializing netlink subsys (disabled) [ 0.346284] audit: type=2000 audit(1436295254.340:1): initialized [ 0.346489] BUG: key c0000000efe90198 not in .data! [ 0.346491] DEBUG_LOCKS_WARN_ON(1) [ 0.346502] ------------[ cut here ]------------ [ 0.346504] WARNING: at ../kernel/locking/lockdep.c:3002 [ 0.346506] Modules linked in: Reported-by: Gustavo Luiz Duarte <gustavold@linux.vnet.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Tested-by: Gustavo Luiz Duarte <gustavold@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 08 July 2015, 05:18:04 UTC |
| 10a5894 | Ian Munsie | 07 July 2015, 05:45:45 UTC | cxl: Fix off by one error allowing subsequent mmap page to be accessed It was discovered that if a process mmaped their problem state area they were able to access one page more than expected, potentially allowing them to access the problem state area of an unrelated process. This was due to a simple off by one error in the mmap fault handler introduced in 0712dc7e73e59d79bcead5d5520acf4e9e917e87 ("cxl: Fix issues when unmapping contexts"), which is fixed in this patch. Cc: stable@vger.kernel.org Fixes: 0712dc7e73e5 ("cxl: Fix issues when unmapping contexts") Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 08 July 2015, 05:17:47 UTC |
| 5caaf53 | Ian Munsie | 07 July 2015, 05:45:46 UTC | cxl: Fail mmap if requested mapping is larger than assigned problem state area This patch makes the mmap call fail outright if the requested region is larger than the problem state area assigned to the context so the error is reported immediately rather than waiting for an attempt to access an address out of bounds. Although we never expect users to map more than the assigned problem state area and are not aware of anyone doing this (other than for testing), this does have the potential to break users if someone has used a larger range regardless. I'm submitting it for consideration, but if this change is not considered acceptable the previous patch is sufficient to prevent access out of bounds without breaking anyone. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 08 July 2015, 05:17:46 UTC |
| 56551da | Pankaj Dev | 07 July 2015, 07:40:50 UTC | drivers: clk: st: Incorrect register offset used for lock_status Incorrect register offset used for sthi407 clockgenC Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Fixes: 51306d56ba81 ("clk: st: STiH407: Support for clockgenC0") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> | 07 July 2015, 23:05:08 UTC |
| d6ac4ff | Linus Torvalds | 07 July 2015, 22:19:09 UTC | Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: "These are late by a week; they should have been merged during the merge window, but unfortunately, the ARM kernel build/boot farms were indicating random failures, and it wasn't clear whether the cause was something in these changes or something during the merge window. This is a set of merge window fixes with some documentation additions" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: avoid unwanted GCC memset()/memcpy() optimisations for IO variants ARM: pgtable: document mapping types ARM: io: convert ioremap*() to functions ARM: io: fix ioremap_wt() implementation ARM: io: document ARM specific behaviour of ioremap*() implementations ARM: fix lockdep unannotated irqs-off warning ARM: 8397/1: fix vdsomunge not to depend on glibc specific error.h ARM: add helpful message when truncating physical memory ARM: add help text for HIGHPTE configuration entry ARM: fix DEBUG_SET_MODULE_RONX build dependencies ARM: 8396/1: use phys_addr_t in pfn_to_kaddr() ARM: 8394/1: update memblock limit after mapping lowmem ARM: 8393/1: smp: Fix suspicious RCU usage with ipi tracepoints | 07 July 2015, 22:19:09 UTC |
| 4f27395 | Tomas Winkler | 07 July 2015, 21:22:03 UTC | mei: nfc: fix deadlock on shutdown/suspend path In function mei_nfc_host_exit mei_cl_remove_device cannot be called under the device mutex as device removing flow invokes the device driver remove handler that calls in turn to mei_cl_disable_device which naturally acquires the device mutex. Also remove mei_cl_bus_remove_devices which has the same issue, but is never executed as currently the only device on the mei client bus is NFC and a new device cannot be easily added till the bus revamp is completed. This fixes regression caused by commit be9b720a0ccb ("mei_phy: move all nfc logic from mei driver to nfc") Prior to this change the nfc driver remove handler called to no-op disable function while actual nfc device was disabled directly from the mei driver. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 07 July 2015, 22:04:12 UTC |
| 8076ca4 | Rafael J. Wysocki | 07 July 2015, 20:48:25 UTC | Merge branch 'acpi-scan' * acpi-scan: ata: ahci_platform: Add ACPI _CLS matching ACPI / scan: Add support for ACPI _CLS device matching | 07 July 2015, 20:48:25 UTC |
| d0aee67 | Rafael J. Wysocki | 07 July 2015, 20:48:14 UTC | Merge branches 'acpi-pnp', 'acpi-soc', 'pm-domains' and 'pm-sleep' * acpi-pnp: ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage * acpi-soc: ACPI / LPSS: Fix up acpi_lpss_create_device() * pm-domains: PM / Domains: Avoid infinite loops in attach/detach code * pm-sleep: PM / hibernate: clarify resume documentation | 07 July 2015, 20:48:14 UTC |
| 3fc7aee | Rafael J. Wysocki | 07 July 2015, 20:47:43 UTC | Merge branch 'pm-wakeirq' * pm-wakeirq: PM / wakeirq: Avoid setting power.wakeirq too hastily | 07 July 2015, 20:47:43 UTC |
