Revision 1e8143db755f745a9842984de5e8b423f583aea2 authored by Linus Torvalds on 27 May 2016, 20:56:02 UTC, committed by Linus Torvalds on 27 May 2016, 20:56:02 UTC
Pull x86 platform driver updates from Darren Hart: "Mostly minor updates and cleanups. One new power management controller driver for Intel Core SoCs. platform/x86: - Add PMC Driver for Intel Core SoC dell-rbtn: - Ignore ACPI notifications if device is suspended thinkpad_acpi: - save kbdlight state on suspend and restore it on resume intel_menlow: - reduce code duplication asus-wmi: - provide access to ALS control ideapad-laptop: - add a new WMI string for ESC key surfacepro3_button: - Add a warning when switching to tablet mode sony-laptop: - Avoid oops on module unload for older laptops intel_telemetry: - Constify telemetry_core_ops structures fujitsu-laptop: - Use IS_ENABLED() instead of checking for built-in or module asus-laptop: - correct error handling in sysfs_acpi_set - remove redundant initializers - correct error handling in asus_read_brightness() fujitsu-laptop: - Support radio LED" * tag 'platform-drivers-x86-v4.7-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: Add PMC Driver for Intel Core SoC dell-rbtn: Ignore ACPI notifications if device is suspended thinkpad_acpi: save kbdlight state on suspend and restore it on resume intel_menlow: reduce code duplication asus-wmi: provide access to ALS control ideapad-laptop: add a new WMI string for ESC key surfacepro3_button: Add a warning when switching to tablet mode sony-laptop: Avoid oops on module unload for older laptops intel_telemetry: Constify telemetry_core_ops structures fujitsu-laptop: Use IS_ENABLED() instead of checking for built-in or module asus-laptop: correct error handling in sysfs_acpi_set asus-laptop: remove redundant initializers asus-laptop: correct error handling in asus_read_brightness() fujitsu-laptop: Support radio LED
cma.c
/*
* Contiguous Memory Allocator
*
* Copyright (c) 2010-2011 by Samsung Electronics.
* Copyright IBM Corporation, 2013
* Copyright LG Electronics Inc., 2014
* Written by:
* Marek Szyprowski <m.szyprowski@samsung.com>
* Michal Nazarewicz <mina86@mina86.com>
* Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* Joonsoo Kim <iamjoonsoo.kim@lge.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License or (at your optional) any later version of the license.
*/
#define pr_fmt(fmt) "cma: " fmt
#ifdef CONFIG_CMA_DEBUG
#ifndef DEBUG
# define DEBUG
#endif
#endif
#define CREATE_TRACE_POINTS
#include <linux/memblock.h>
#include <linux/err.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/log2.h>
#include <linux/cma.h>
#include <linux/highmem.h>
#include <linux/io.h>
#include <trace/events/cma.h>
#include "cma.h"
struct cma cma_areas[MAX_CMA_AREAS];
unsigned cma_area_count;
static DEFINE_MUTEX(cma_mutex);
phys_addr_t cma_get_base(const struct cma *cma)
{
return PFN_PHYS(cma->base_pfn);
}
unsigned long cma_get_size(const struct cma *cma)
{
return cma->count << PAGE_SHIFT;
}
static unsigned long cma_bitmap_aligned_mask(const struct cma *cma,
int align_order)
{
if (align_order <= cma->order_per_bit)
return 0;
return (1UL << (align_order - cma->order_per_bit)) - 1;
}
/*
* Find a PFN aligned to the specified order and return an offset represented in
* order_per_bits.
*/
static unsigned long cma_bitmap_aligned_offset(const struct cma *cma,
int align_order)
{
if (align_order <= cma->order_per_bit)
return 0;
return (ALIGN(cma->base_pfn, (1UL << align_order))
- cma->base_pfn) >> cma->order_per_bit;
}
static unsigned long cma_bitmap_pages_to_bits(const struct cma *cma,
unsigned long pages)
{
return ALIGN(pages, 1UL << cma->order_per_bit) >> cma->order_per_bit;
}
static void cma_clear_bitmap(struct cma *cma, unsigned long pfn,
unsigned int count)
{
unsigned long bitmap_no, bitmap_count;
bitmap_no = (pfn - cma->base_pfn) >> cma->order_per_bit;
bitmap_count = cma_bitmap_pages_to_bits(cma, count);
mutex_lock(&cma->lock);
bitmap_clear(cma->bitmap, bitmap_no, bitmap_count);
mutex_unlock(&cma->lock);
}
static int __init cma_activate_area(struct cma *cma)
{
int bitmap_size = BITS_TO_LONGS(cma_bitmap_maxno(cma)) * sizeof(long);
unsigned long base_pfn = cma->base_pfn, pfn = base_pfn;
unsigned i = cma->count >> pageblock_order;
struct zone *zone;
cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
if (!cma->bitmap)
return -ENOMEM;
WARN_ON_ONCE(!pfn_valid(pfn));
zone = page_zone(pfn_to_page(pfn));
do {
unsigned j;
base_pfn = pfn;
for (j = pageblock_nr_pages; j; --j, pfn++) {
WARN_ON_ONCE(!pfn_valid(pfn));
/*
* alloc_contig_range requires the pfn range
* specified to be in the same zone. Make this
* simple by forcing the entire CMA resv range
* to be in the same zone.
*/
if (page_zone(pfn_to_page(pfn)) != zone)
goto err;
}
init_cma_reserved_pageblock(pfn_to_page(base_pfn));
} while (--i);
mutex_init(&cma->lock);
#ifdef CONFIG_CMA_DEBUGFS
INIT_HLIST_HEAD(&cma->mem_head);
spin_lock_init(&cma->mem_head_lock);
#endif
return 0;
err:
kfree(cma->bitmap);
cma->count = 0;
return -EINVAL;
}
static int __init cma_init_reserved_areas(void)
{
int i;
for (i = 0; i < cma_area_count; i++) {
int ret = cma_activate_area(&cma_areas[i]);
if (ret)
return ret;
}
return 0;
}
core_initcall(cma_init_reserved_areas);
/**
* cma_init_reserved_mem() - create custom contiguous area from reserved memory
* @base: Base address of the reserved area
* @size: Size of the reserved area (in bytes),
* @order_per_bit: Order of pages represented by one bit on bitmap.
* @res_cma: Pointer to store the created cma region.
*
* This function creates custom contiguous area from already reserved memory.
*/
int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
unsigned int order_per_bit,
struct cma **res_cma)
{
struct cma *cma;
phys_addr_t alignment;
/* Sanity checks */
if (cma_area_count == ARRAY_SIZE(cma_areas)) {
pr_err("Not enough slots for CMA reserved regions!\n");
return -ENOSPC;
}
if (!size || !memblock_is_region_reserved(base, size))
return -EINVAL;
/* ensure minimal alignment required by mm core */
alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order);
/* alignment should be aligned with order_per_bit */
if (!IS_ALIGNED(alignment >> PAGE_SHIFT, 1 << order_per_bit))
return -EINVAL;
if (ALIGN(base, alignment) != base || ALIGN(size, alignment) != size)
return -EINVAL;
/*
* Each reserved area must be initialised later, when more kernel
* subsystems (like slab allocator) are available.
*/
cma = &cma_areas[cma_area_count];
cma->base_pfn = PFN_DOWN(base);
cma->count = size >> PAGE_SHIFT;
cma->order_per_bit = order_per_bit;
*res_cma = cma;
cma_area_count++;
totalcma_pages += (size / PAGE_SIZE);
return 0;
}
/**
* cma_declare_contiguous() - reserve custom contiguous area
* @base: Base address of the reserved area optional, use 0 for any
* @size: Size of the reserved area (in bytes),
* @limit: End address of the reserved memory (optional, 0 for any).
* @alignment: Alignment for the CMA area, should be power of 2 or zero
* @order_per_bit: Order of pages represented by one bit on bitmap.
* @fixed: hint about where to place the reserved area
* @res_cma: Pointer to store the created cma region.
*
* This function reserves memory from early allocator. It should be
* called by arch specific code once the early allocator (memblock or bootmem)
* has been activated and all other subsystems have already allocated/reserved
* memory. This function allows to create custom reserved areas.
*
* If @fixed is true, reserve contiguous area at exactly @base. If false,
* reserve in range from @base to @limit.
*/
int __init cma_declare_contiguous(phys_addr_t base,
phys_addr_t size, phys_addr_t limit,
phys_addr_t alignment, unsigned int order_per_bit,
bool fixed, struct cma **res_cma)
{
phys_addr_t memblock_end = memblock_end_of_DRAM();
phys_addr_t highmem_start;
int ret = 0;
#ifdef CONFIG_X86
/*
* high_memory isn't direct mapped memory so retrieving its physical
* address isn't appropriate. But it would be useful to check the
* physical address of the highmem boundary so it's justifiable to get
* the physical address from it. On x86 there is a validation check for
* this case, so the following workaround is needed to avoid it.
*/
highmem_start = __pa_nodebug(high_memory);
#else
highmem_start = __pa(high_memory);
#endif
pr_debug("%s(size %pa, base %pa, limit %pa alignment %pa)\n",
__func__, &size, &base, &limit, &alignment);
if (cma_area_count == ARRAY_SIZE(cma_areas)) {
pr_err("Not enough slots for CMA reserved regions!\n");
return -ENOSPC;
}
if (!size)
return -EINVAL;
if (alignment && !is_power_of_2(alignment))
return -EINVAL;
/*
* Sanitise input arguments.
* Pages both ends in CMA area could be merged into adjacent unmovable
* migratetype page by page allocator's buddy algorithm. In the case,
* you couldn't get a contiguous memory, which is not what we want.
*/
alignment = max(alignment,
(phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order));
base = ALIGN(base, alignment);
size = ALIGN(size, alignment);
limit &= ~(alignment - 1);
if (!base)
fixed = false;
/* size should be aligned with order_per_bit */
if (!IS_ALIGNED(size >> PAGE_SHIFT, 1 << order_per_bit))
return -EINVAL;
/*
* If allocating at a fixed base the request region must not cross the
* low/high memory boundary.
*/
if (fixed && base < highmem_start && base + size > highmem_start) {
ret = -EINVAL;
pr_err("Region at %pa defined on low/high memory boundary (%pa)\n",
&base, &highmem_start);
goto err;
}
/*
* If the limit is unspecified or above the memblock end, its effective
* value will be the memblock end. Set it explicitly to simplify further
* checks.
*/
if (limit == 0 || limit > memblock_end)
limit = memblock_end;
/* Reserve memory */
if (fixed) {
if (memblock_is_region_reserved(base, size) ||
memblock_reserve(base, size) < 0) {
ret = -EBUSY;
goto err;
}
} else {
phys_addr_t addr = 0;
/*
* All pages in the reserved area must come from the same zone.
* If the requested region crosses the low/high memory boundary,
* try allocating from high memory first and fall back to low
* memory in case of failure.
*/
if (base < highmem_start && limit > highmem_start) {
addr = memblock_alloc_range(size, alignment,
highmem_start, limit,
MEMBLOCK_NONE);
limit = highmem_start;
}
if (!addr) {
addr = memblock_alloc_range(size, alignment, base,
limit,
MEMBLOCK_NONE);
if (!addr) {
ret = -ENOMEM;
goto err;
}
}
/*
* kmemleak scans/reads tracked objects for pointers to other
* objects but this address isn't mapped and accessible
*/
kmemleak_ignore(phys_to_virt(addr));
base = addr;
}
ret = cma_init_reserved_mem(base, size, order_per_bit, res_cma);
if (ret)
goto err;
pr_info("Reserved %ld MiB at %pa\n", (unsigned long)size / SZ_1M,
&base);
return 0;
err:
pr_err("Failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M);
return ret;
}
/**
* cma_alloc() - allocate pages from contiguous area
* @cma: Contiguous memory region for which the allocation is performed.
* @count: Requested number of pages.
* @align: Requested alignment of pages (in PAGE_SIZE order).
*
* This function allocates part of contiguous memory on specific
* contiguous memory area.
*/
struct page *cma_alloc(struct cma *cma, size_t count, unsigned int align)
{
unsigned long mask, offset;
unsigned long pfn = -1;
unsigned long start = 0;
unsigned long bitmap_maxno, bitmap_no, bitmap_count;
struct page *page = NULL;
int ret;
if (!cma || !cma->count)
return NULL;
pr_debug("%s(cma %p, count %zu, align %d)\n", __func__, (void *)cma,
count, align);
if (!count)
return NULL;
mask = cma_bitmap_aligned_mask(cma, align);
offset = cma_bitmap_aligned_offset(cma, align);
bitmap_maxno = cma_bitmap_maxno(cma);
bitmap_count = cma_bitmap_pages_to_bits(cma, count);
for (;;) {
mutex_lock(&cma->lock);
bitmap_no = bitmap_find_next_zero_area_off(cma->bitmap,
bitmap_maxno, start, bitmap_count, mask,
offset);
if (bitmap_no >= bitmap_maxno) {
mutex_unlock(&cma->lock);
break;
}
bitmap_set(cma->bitmap, bitmap_no, bitmap_count);
/*
* It's safe to drop the lock here. We've marked this region for
* our exclusive use. If the migration fails we will take the
* lock again and unmark it.
*/
mutex_unlock(&cma->lock);
pfn = cma->base_pfn + (bitmap_no << cma->order_per_bit);
mutex_lock(&cma_mutex);
ret = alloc_contig_range(pfn, pfn + count, MIGRATE_CMA);
mutex_unlock(&cma_mutex);
if (ret == 0) {
page = pfn_to_page(pfn);
break;
}
cma_clear_bitmap(cma, pfn, count);
if (ret != -EBUSY)
break;
pr_debug("%s(): memory range at %p is busy, retrying\n",
__func__, pfn_to_page(pfn));
/* try again with a bit different memory target */
start = bitmap_no + mask + 1;
}
trace_cma_alloc(pfn, page, count, align);
pr_debug("%s(): returned %p\n", __func__, page);
return page;
}
/**
* cma_release() - release allocated pages
* @cma: Contiguous memory region for which the allocation is performed.
* @pages: Allocated pages.
* @count: Number of allocated pages.
*
* This function releases memory allocated by alloc_cma().
* It returns false when provided pages do not belong to contiguous area and
* true otherwise.
*/
bool cma_release(struct cma *cma, const struct page *pages, unsigned int count)
{
unsigned long pfn;
if (!cma || !pages)
return false;
pr_debug("%s(page %p)\n", __func__, (void *)pages);
pfn = page_to_pfn(pages);
if (pfn < cma->base_pfn || pfn >= cma->base_pfn + cma->count)
return false;
VM_BUG_ON(pfn + count > cma->base_pfn + cma->count);
free_contig_range(pfn, count);
cma_clear_bitmap(cma, pfn, count);
trace_cma_release(pfn, pages, count);
return true;
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...