Revision 1e905d996cba39d82c1b82fb853cd22abe16245b authored by swift_jenkins on 06 April 2024, 00:02:48 UTC, committed by swift_jenkins on 06 April 2024, 00:02:48 UTC
CHANGELOG.md
# CHANGELOG
> [!NOTE]
> This is in reverse chronological order, so newer entries are added to the top.
## Swift 6.0
* Swift 5.10 missed a semantic check from [SE-0309][]. In type context, a reference to a
protocol `P` that has associated types or `Self` requirements should use
the `any` keyword, but this was not enforced in nested generic argument positions.
This is now an error as required by the proposal:
```swift
protocol P { associatedtype A }
struct Outer<T> { struct Inner<U> { } }
let x = Outer<P>.Inner<P>() // error
```
To correct the error, add `any` where appropriate, for example
`Outer<any P>.Inner<any P>`.
* Swift 5.10 accepted certain invalid opaque return types from [SE-0346][].
If a generic argument of a constrained opaque return type did not
satisfy the requirements on the primary associated type, the generic
argument was silently ignored and type checking would proceed as if it
weren't stated. This now results in a diagnostic:
```swift
protocol P<A> { associatedtype A: Sequence }
struct G<A: Sequence>: P {}
func f() -> some P<Int> { return G<Array<Int>>() } // error
```
The return type above should be written as `some P<Array<Int>>` to match
the return statement. The old broken behavior in this situation can also
be restored, by removing the erroneous constraint and using the more general
upper bound `some P`.
* [SE-0408][]:
A `for`-`in` loop statement can now accept a pack expansion expression,
enabling iteration over the elements of its respective value pack. This form
supports pattern matching, control transfer statements, and other features
available to a `Sequence`-driven `for`-`in` loop, except for the `where`
clause. Below is an example implementation of the equality operator for
tuples of arbitrary length using pack iteration:
```swift
func == <each Element: Equatable>(lhs: (repeat each Element),
rhs: (repeat each Element)) -> Bool {
for (left, right) in repeat (each lhs, each rhs) {
guard left == right else { return false }
}
return true
}
```
The elements of the value pack corresponding to the pack expansion expression
are evaluated on demand, meaning the i<sup>th</sup> element is evaluated on
the i<sup>th</sup> iteration:
```swift
func doSomething(_: some Any) {}
func evaluateFirst<each T>(_ t: repeat each T) {
for _ in repeat doSomething(each t) {
break
}
}
evaluateFirst(1, 2, 3)
// 'doSomething' will be called only on the first element of the pack.
```
* [SE-0352][]:
The Swift 6 language mode will open existential values with
"self-conforming" types (such as `any Error` or `@objc` protocols)
passed to generic functions. For example:
```swift
func takeError<E: Error>(_ error: E) { }
func passError(error: any Error) {
takeError(error) // Swift 5 does not open `any Error`, Swift 6 does
}
```
This behavior can be enabled prior to the Swift 6 language mode
using the upcoming language feature `ImplicitOpenExistentials`.
* [SE-0422][]:
Non-built-in expression macros can now be used as default arguments that
expand at each call site. For example, a custom `#CurrentFile` macro used as
a default argument in 'Library.swift' won't be expanded to `"Library.swift"`:
```swift
@freestanding(expression)
public macro CurrentFile() -> String = ...
public func currentFile(name: String = #CurrentFile) { name }
```
Instead, it will be expanded at where the function is called:
```swift
print(currentFile())
// Prints "main.swift"
```
The expanded code can also use declarations from the caller side context:
```swift
var person = "client"
greetPerson(/* greeting: #informalGreeting */)
// Prints "Hi client" if macro expands to "Hi \(person)"
```
* [SE-0417][]:
Tasks now gain the ability to respect Task Executor preference.
This allows tasks executing default actors (which do not declare a custom executor),
and nonisolated asynchronous functions to fall back to a preferred executor, rather than always
executing on the default global pool.
The executor preference may be stated using the `withTaskExecutorPreference` function:
```swift
nonisolated func doSomething() async { ... }
await withTaskExecutorPreference(preferredExecutor) {
doSomething()
```
Or when creating new unstructured or child-tasks (e.g. in a task group):
```swift
Task(executorPreference: preferredExecutor) {
// executes on 'preferredExecutor'
await doSomething() // doSomething body would execute on 'preferredExecutor'
}
```
* [SE-0413][]:
Functions can now specify the type of error that they throw as part of the
function signature. For example:
```swift
func parseRecord(from string: String) throws(ParseError) -> Record { ... }
```
A call to `parseRecord(from:)` will either return a `Record` instance or throw
an error of type `ParseError`. For example, a `do..catch` block will infer
the `error` variable as being of type `ParseError`:
```swift
do {
let record = try parseRecord(from: myString)
} catch {
// error has type ParseError
}
```
Typed throws generalizes over throwing and non-throwing functions. A function
that is specified as `throws` (without an explicitly-specified error type) is
equivalent to one that specifies `throws(any Error)`, whereas a non-throwing
is equivalent to one that specifies `throws(Never)`. Calls to functions that
are `throws(Never)` are non-throwing.
Typed throws can also be used in generic functions to propagate error types
from parameters, in a manner that is more precise than `rethrows`. For
example, the `Sequence.map` operation can propagate the thrown error type from
its closure parameter, indicating that it only throws errors of the same type
as that closure does:
```swift
extension Sequence {
func map<T, E>(_ body: (Element) throws(E) -> T) throws(E) -> [T] { ... }
}
```
When given a non-throwing closure as a parameter, `map` will not throw.
* [#70065][]:
With the implementation of [SE-0110][], a closure parameter syntax consisting
of only a parameter type — and no parameter name — was accidentally made legal
for certain unambiguous type syntaxes in Swift 4. For example:
```swift
let closure = { ([Int]) in }
```
Having been [gated](https://github.com/apple/swift/pull/28171) behind a
compiler warning since at least Swift 5.2, this syntax is now rejected.
* [#71075][]:
\_SwiftConcurrencyShims used to declare the `exit` function, even though it
might not be available. The declaration has been removed, and must be imported
from the appropriate C library module (e.g. Darwin or SwiftGlibc)
* [SE-0270][]:
The Standard Library now provides APIs for performing collection operations
over noncontiguous elements. For example:
```swift
var numbers = Array(1...15)
// Find the indices of all the even numbers
let indicesOfEvens = numbers.indices(where: { $0.isMultiple(of: 2) })
// Perform an operation with just the even numbers
let sumOfEvens = numbers[indicesOfEvens].reduce(0, +)
// sumOfEvens == 56
// You can gather the even numbers at the beginning
let rangeOfEvens = numbers.moveSubranges(indicesOfEvens, to: numbers.startIndex)
// numbers == [2, 4, 6, 8, 10, 12, 14, 1, 3, 5, 7, 9, 11, 13, 15]
// numbers[rangeOfEvens] == [2, 4, 6, 8, 10, 12, 14]
```
The standard library now provides a new `indices(where:)` function which creates
a `RangeSet` - a new type representing a set of discontiguous indices. `RangeSet`
is generic over its index type and can be used to execute operations over
noncontiguous indices such as collecting, moving, or removing elements from a
collection. Additionally, `RangeSet` is generic over any `Comparable` collection
index and can be used to represent a selection of items in a list or a refinement
of a filter or search result.
## Swift 5.10
### 2024-03-05 (Xcode 15.3)
* Swift 5.10 closes all known static data-race safety holes in complete strict
concurrency checking.
When writing code against `-strict-concurrency=complete`, Swift 5.10 will
diagnose all potential for data races at compile time unless an explicit
unsafe opt out, such as `nonisolated(unsafe)` or `@unchecked Sendable`, is
used.
For example, in Swift 5.9, the following code crashes at runtime due to a
`@MainActor`-isolated initializer being evaluated outside the actor, but it
was not diagnosed under `-strict-concurrency=complete`:
```swift
@MainActor
class MyModel {
init() {
MainActor.assertIsolated()
}
static let shared = MyModel()
}
func useShared() async {
let model = MyModel.shared
}
await useShared()
```
The above code admits data races because a `@MainActor`-isolated static
variable, which evaluates a `@MainActor`-isolated initial value upon first
access, is accessed synchronously from a `nonisolated` context. In Swift
5.10, compiling the code with `-strict-concurrency=complete` produces a
warning that the access must be done asynchronously:
```
warning: expression is 'async' but is not marked with 'await'
let model = MyModel.shared
^~~~~~~~~~~~~~
await
```
Swift 5.10 fixed numerous other bugs in `Sendable` and actor isolation
checking to strengthen the guarantees of complete concurrency checking.
Note that the complete concurrency model in Swift 5.10 is conservative.
Several Swift Evolution proposals are in active development to improve the
usability of strict concurrency checking ahead of Swift 6.
* [SE-0412][]:
Global and static variables are prone to data races because they provide memory that can be accessed from any program context. Strict concurrency checking in Swift 5.10 prevents data races on global and static variables by requiring them to be either:
1. isolated to a global actor, or
2. immutable and of `Sendable` type.
For example:
```swift
var mutableGlobal = 1
// warning: var 'mutableGlobal' is not concurrency-safe because it is non-isolated global shared mutable state
// (unless it is top-level code which implicitly isolates to @MainActor)
@MainActor func mutateGlobalFromMain() {
mutableGlobal += 1
}
nonisolated func mutateGlobalFromNonisolated() async {
mutableGlobal += 10
}
struct S {
static let immutableSendable = 10
// okay; 'immutableSendable' is safe to access concurrently because it's immutable and 'Int' is 'Sendable'
}
```
A new `nonisolated(unsafe)` modifier can be used to annotate a global or static variable to suppress data isolation violations when manual synchronization is provided:
```swift
// This global is only set in one part of the program
nonisolated(unsafe) var global: String!
```
`nonisolated(unsafe)` can be used on any form of storage, including stored properties and local variables, as a more granular opt out for `Sendable` checking, eliminating the need for `@unchecked Sendable` wrapper types in many use cases:
```swift
import Dispatch
// 'MutableData' is not 'Sendable'
class MutableData { ... }
final class MyModel: Sendable {
private let queue = DispatchQueue(...)
// 'protectedState' is manually isolated by 'queue'
nonisolated(unsafe) private var protectedState: MutableData
}
```
Note that without correct implementation of a synchronization mechanism to achieve data isolation, dynamic run-time analysis from exclusivity enforcement or tools such as the Thread Sanitizer could still identify failures.
* [SE-0411][]:
Swift 5.10 closes a data-race safety hole that previously permitted isolated
default stored property values to be synchronously evaluated from outside the
actor. For example, the following code compiles warning-free under
`-strict-concurrency=complete` in Swift 5.9, but it will crash at runtime at
the call to `MainActor.assertIsolated()`:
```swift
@MainActor func requiresMainActor() -> Int {
MainActor.assertIsolated()
return 0
}
@MainActor struct S {
var x = requiresMainActor()
var y: Int
}
nonisolated func call() async {
let s = await S(y: 10)
}
await call()
```
This happens because `requiresMainActor()` is used as a default argument to
the member-wise initializer of `S`, but default arguments are always
evaluated in the caller. In this case, the caller runs on the generic
executor, so the default argument evaluation crashes.
Under `-strict-concurrency=complete` in Swift 5.10, default argument values
can safely share the same isolation as the enclosing function or stored
property. The above code is still valid, but the isolated default argument is
guaranteed to be evaluated in the callee's isolation domain.
## Swift 5.9.2
### 2023-12-11 (Xcode 15.1)
* [SE-0407][]:
Member macros can specify a list of protocols via the `conformances` argument to the macro role. The macro implementation will be provided with those protocols that are listed but have not already been implemented by the type to which the member macro is attached, in the same manner as extension macros.
```swift
@attached(member, conformances: Decodable, Encodable, names: named(init(from:), encode(to:)))
@attached(extension, conformances: Decodable, Encodable, names: named(init(from:), encode(to:)))
macro Codable() = #externalMacro(module: "MyMacros", type: "CodableMacro")
```
## Swift 5.9
### 2023-09-18 (Xcode 15.0)
* [SE-0382][], [SE-0389][], [SE-0394][], [SE-0397][]:
Swift 5.9 includes a new macro system that can be used to eliminate boilerplate and provide new forms of expressive APIs. Macros are declared with the new `macro` introducer:
```swift
@freestanding(expression)
macro assert(_ condition: Bool) = #externalMacro(module: "PowerAssertMacros", type: "AssertMacro")
```
Macros have parameter and result types, like functions, but are defined as separate programs that operate on syntax trees (using [swift-syntax][]) and produce new syntax trees that are incorporated into the program. Freestanding macros, indicated with the `@freestanding` attribute, are expanded in source code with a leading `#`:
```swift
#assert(x + y == z) // expands to check the result of x + y == z and report failure if it's false
```
Macros can also be marked as `@attached`, in which case they will be meaning that they will be expanded using custom attribute syntax. For example:
```swift
@attached(peer, names: overloaded)
macro AddCompletionHandler() = #externalMacro(
module: "ConcurrencyHelperMacros",
type: "AddCompletionHandlerMacro"
)
@AddCompletionHandler
func fetchAvatar(from url: URL) throws -> Image { ... }
// expands to...
func fetchAvatar(from url: URL, completionHandler: @escaping (Result<Image, Error>) -> Void) {
Task.detached {
do {
let result = try await fetchAvatar(from: url)
completionHandler(.success(result))
} catch {
completionHandler(.failure(error))
}
}
}
```
Macros are implemented in separate programs, which are executed by the Swift compiler. The Swift Package Manager's manifest provides a new `macro` target type to describe macros:
```swift
import PackageDescription
import CompilerPluginSupport
let package = Package(
name: "ConcurrencyHelpers",
dependencies: [
.package(url: "https://github.com/apple/swift-syntax", from: "509.0.0"),
],
targets: [
.macro(name: "ConcurrencyHelperMacros",
dependencies: [
.product(name: "SwiftSyntaxMacros", package: "swift-syntax"),
.product(name: "SwiftCompilerPlugin", package: "swift-syntax")
]),
.target(name: "ConcurrencyHelpers", dependencies: ["ConcurrencyHelperMacros"]),
.testTarget(name: "ConcurrencyHelperMacroTests", dependencies: ["ConcurrencyHelperMacros"]),
]
)
```
* [SE-0380][]:
`if` and `switch` statements may now be used as expressions to:
* Return values from functions, properties, and closures (either with
implicit or explicit `return`)
* Throw errors using `throw`
* Assign values to variables
* Declare variables
Each branch of the `if` or `switch` must be a single expression, the value
of which becomes the value of the overall expression when that branch is
chosen.
```swift
let bullet =
if isRoot && (count == 0 || !willExpand) { "" }
else if count == 0 { "- " }
else if maxDepth <= 0 { "▹ " }
else { "▿ " }
```
```swift
public static func width(_ x: Unicode.Scalar) -> Int {
switch x.value {
case 0..<0x80: 1
case 0x80..<0x0800: 2
case 0x0800..<0x1_0000: 3
default: 4
}
}
```
* [#64927][]:
Swift 5.9 introduces warnings that catch conversions from an inout
argument in the caller to an `UnsafeRawPointer` in the callee
whenever the original type contains an object reference.
```swift
func inspectString(string: inout String) {
readBytes(&string)
// warning: forming an 'UnsafeRawPointer' to an inout variable of type String
// exposes the internal representation rather than the string contents.
}
```
```swift
func inspectData(data: inout Data) {
readBytes(&data)
// warning: forming an 'UnsafeRawPointer' to a variable of type 'T';
// this is likely incorrect because 'T' may contain an object reference.
}
```
Please see the "Workarounds for common cases" section link in github
issue #64927.
* Marking stored properties as unavailable with `@available` has been banned,
closing an unintentional soundness hole that had allowed arbitrary
unavailable code to run and unavailable type metadata to be used at runtime:
```swift
@available(*, unavailable)
struct Unavailable {
init() {
print("Unavailable.init()")
}
}
struct S {
@available(*, unavailable)
var x = Unavailable()
}
_ = S() // prints "Unavailable.init()"
```
Marking `deinit` as unavailable has also been banned for similar reasons.
* [SE-0366][]:
The lifetime of a local variable value can be explicitly ended using the
`consume` operator, forwarding ownership to the surrounding call, assignment,
or initialization without copying:
```swift
var x: [String] = []
x.append("apples")
x.append("bananas")
x.append("oranges")
process(consume x) // forward the current value, without copying
x = [] // start building a new value
x.append("broccoli")
x.append("cauliflower")
x.append("asparagus")
...
```
* [SE-0377][]:
Functions can now declare whether they take value parameters by `borrowing`
access to a value provided by the caller, or by `consuming` a value that the
callee is allowed to take ownership of:
```swift
struct HealthyFoods {
var values: [String] = []
// Ask to `consume` the parameter, since we want to use it
// to incorporate into our own `values` array
mutating func add(_ value: consuming String) {
values.append(value)
}
}
```
## Swift 5.8
### 2023-03-30 (Xcode 14.3)
* [SE-0376][]:
The `@backDeployed(before:)` attribute may now be used to extend the availability of a function to OS releases prior to the introduction of that function as ABI.
For example, suppose that `struct Temperature` was introduced in a macOS SDK framework in macOS 12. Later in macOS 13 the framework authors decided to add a `degreesFahrenheit` property as a convenience:
```swift
@available(macOS 12, *)
public struct Temperature {
public var degreesCelsius: Double
// ...
}
extension Temperature {
@available(macOS 12, *)
@backDeployed(before: macOS 13)
public var degreesFahrenheit: Double {
return (degreesCelsius * 9 / 5) + 32
}
}
```
Adding the `@backDeployed` attribute to `degreesFahrenheit` enables the framework author to make this new declaration available to apps with a minimum deployment target of macOS 12, even though the ABI entry point for `degreesFahrenheit` is only present in macOS 13 and up.
When a function with `@backDeployed` is called, the compiler wraps the invocation of the function in a thunk. The thunk checks whether the library entry point for the declaration is available at runtime, and invokes it if it is. Otherwise, a copy of the function that was emitted into the client is called instead.
* [#56139][]:
Сollection downcasts in cast patterns are now supported. For example:
```swift
func collectionDowncast(_ arr: [Any]) {
switch arr {
case let ints as [Int]:
// ...
case is [Bool]:
// ...
}
}
```
* [SE-0370][]:
The API of `UnsafeMutableRawPointer`, `UnsafeMutableBufferPointer`, `UnsafeMutableRawBufferPointer` were improved, adding previously missing initialization (and deinitialization) methods, including more performant initialization from `Collection` types.
For `UnsafeMutablePointer<T>` and `UnsafeMutableBufferPointer<T>`, method names containing the word "assign" were renamed to use the word "update", and many more were added. Every multi-element initialization method of `UnsafeMutablePointer` and `UnsafeMutableBufferPointer` now has a corresponding "update" method.
Slices of `UnsafeBufferPointer`, `UnsafeRawBufferPointer`, `UnsafeMutableBufferPointer` and `UnsafeMutableRawBufferPointer` now share the collection-like API of their base type. For example, given an initialized `b: UnsafeMutableBufferPointer<Int>`, the following lines are synonymous:
```swift
b.update(repeating: 0)
b[b.startIndex..<b.endIndex].update(repeating: 0)
```
* [SE-0365][]:
Implicit `self` is now permitted for `weak self` captures, after `self` is unwrapped.
For example, the usage of implicit `self` below is permitted:
```swift
class ViewController {
let button: Button
func setup() {
button.tapHandler = { [weak self] in
guard let self else { return }
dismiss() // refers to `self.dismiss()`
}
}
func dismiss() { ... }
}
```
In Swift 5 language modes, implicit `self` is permitted for `weak self` captures in _non-escaping_ closures even before `self` is unwrapped. For example, this code compiles successfully in Swift 5 language mode:
```swift
class ExampleClass {
func makeArray() -> [String] {
// `Array.map` takes a non-escaping closure:
["foo", "bar", "baaz"].map { [weak self] string in
double(string) // implicitly refers to `self!.double(string)`
}
}
func double(_ string: String) -> String {
string + string
}
}
```
In Swift 6, the above code will no longer compile. `weak self` captures in non-escaping closures now have the same behavior as captures in escaping closures (as described in [SE-0365][]). Code relying on the previous behavior will need to be updated to either unwrap `self` (e.g. by adding a `guard let self else return` statement), or to use a different capture method (e.g. using `[self]` or `[unowned self]` instead of `[weak self]`).
* [SE-0362][]:
The compiler flag `-enable-upcoming-feature X` can now be used to enable a specific feature `X` that has been accepted by the evolution process, but whose introduction into the language is waiting for the next major version (e.g., version 6). The `X` is specified by any proposal that falls into this category:
* `ConciseMagicFile` enables the new `#file` semantics in [SE-0274][].
* `ForwardTrailingClosures` disables the "backward" scanning behavior of [SE-0286][].
* `BareSlashRegexLiterals` enables the regex literal syntax of [SE-0354][].
Features can be detected in source code with `#if hasFeature(X)`.
## Swift 5.7
### 2022-09-12 (Xcode 14.0)
* [SE-0327][]:
There are a few notable changes in Swift 5.7 with respect to SE-0327.
First, the deinitializer and most kinds of initializers for `actor` types, and types constrained by a global actor like the `@MainActor`, have revised rules about what expressions are permitted in their body. The goal of these revisions has been to improve language expressivity and safety. In particular, many more programming patterns are now permitted in these initializers.
For example, a non-async initializer of an `actor` prior to Swift 5.7 would raise a diagnostic any time `self` escapes the initializer before returning. That diagnostic's purpose was to protect against a possible data race when accessing isolated stored proeprties. But, that diagnostic was emitted even if there was no dangerous racy access.
In Swift 5.7, the compiler now checks these initializers for dangerous accesses to isolated stored properties that occur after an escape of `self`:
```swift
actor Database {
// ... other properties ...
var rows: Int = 0
init(_ world: DataUser) {
defer {
print("last = \(self.rows)") // ❌ this access to 'rows' is illegal.
}
print("before = \(self.rows)") // ✅ this access to 'rows' is OK
world.publishDatabase(self) // ✅ passing 'self' is OK in Swift 5.7+
print("after = \(self.rows)") // ❌ this access to 'rows' is illegal.
Task { [weak self] in // ✅ capturing 'self' is OK in Swift 5.7+
while let db = self { await db.prune() }
}
}
}
```
This is a control-flow sensitive check, meaning an illegal access does not necessarily appear on a source line after an escape of `self` (in the example above, consider _when_ the `defer` is executed). The compiler will always point out one of the escapes of `self` that is causing an access to become illegal.
Next, delegating initializers of an actor are no longer always non-isolated. This means an `async` delegating initializer can do the same things as a non-delegating one.
Finally, the diagnostic about non-isolated default-value expressions introduced for Swift 5.6 in the Xcode 13.3 release has been removed. The proposed rule was not precise enough to avoid flagging an innocuous yet common pattern in SwiftUI code involving `@StateObject` properties and `@MainActor`.
* The Swift compiler no longer warns about redundant requirements in generic declarations. For example,
the following code diagnosed a warning in Swift 5.6 about the `T.Iterator : IteratorProtocol`
requirement being redundant, because it is implied by `T : Sequence`:
```swift
func firstElement<T: Sequence>(_: T) -> T.Element where T.Iterator: IteratorProtocol {...}
```
A redundant requirement does not indicate a coding error, and sometimes it is desirable to spell them
out for documentation purposes. For this reason these warnings are now disabled by default.
To restore the previous behavior, pass the `-Xfrontend -warn-redundant-requirements`
compiler flag.
* [SE-0338][]:
Non-isolated async functions now always execute on the global concurrent pool,
so calling a non-isolated async function from actor-isolated code will leave
the actor. For example:
```swift
class C { }
func f(_: C) async { /* always executes on the global concurrent pool */ }
actor A {
func g(c: C) async {
/* always executes on the actor */
print("on the actor")
await f(c)
}
}
```
Prior to this change, the call from `f` to `g` might have started execution of
`g` on the actor, which could lead to actors being busy longer than strictly
necessary. Now, the non-isolated async function will always hop to the global
cooperative pool, not run on the actor. This can result in a behavior change
for programs that assumed that a non-isolated async function called from a
`@MainActor` context will be executed on the main actor, although such
programs were already technically incorrect.
Additionally, when leaving an actor to execution on the global cooperative
pool, `Sendable` checking will be performed, so the compiler will emit a
diagnostic in the call to `f` if `c` is not of `Sendable` type.
* [SE-0350][]:
The standard library has a new `Regex<Output>` type.
This type represents an _extended regular expression_, allowing more fluent
string processing operations. A `Regex` may be created by
[initialization from a string][SE-0355]:
```swift
let pattern = "a[bc]+" // matches "a" followed by one or more instances
// of either "b" or "c"
let regex = try! Regex(pattern)
```
Or via a [regex literal][SE-0354]:
```swift
let regex = #/a[bc]+/#
```
In Swift 6, `/` will also be supported as a delimiter for `Regex` literals.
You can enable this mode in Swift 5.7 with the `-enable-bare-slash-regex`
flag. Doing so will cause some existing expressions that use `/` as an
operator to no longer compile; you can add parentheses or line breaks as a
workaround.
There are [new string-processing algorithms][SE-0357] that support
`String`, `Regex` and arbitrary `Collection` types.
* [SE-0329][]:
New types representing time and clocks were introduced. This includes a protocol `Clock` defining clocks which allow for defining a concept of now and a way to wake up after a given instant. Additionally a new protocol `InstantProtocol` for defining instants in time was added. Furthermore a new protocol `DurationProtocol` was added to define an elapsed duration between two given `InstantProtocol` types. Most commonly the `Clock` types for general use are the `SuspendingClock` and `ContinuousClock` which represent the most fundamental clocks for the system. The `SuspendingClock` type does not progress while the machine is suspended whereas the `ContinuousClock` progresses no matter the state of the machine.
```swift
func delayedHello() async throws {
try await Task.sleep(until: .now + .milliseconds(123), clock: .continuous)
print("hello delayed world")
}
```
`Clock` also has methods to measure the elapsed duration of the execution of work. In the case of the `SuspendingClock` and `ContinuousClock` this measures with high resolution and is suitable for benchmarks.
```swift
let clock = ContinuousClock()
let elapsed = clock.measure {
someLongRunningWork()
}
```
* [SE-0309][]:
Protocols with associated types and `Self` requirements can now be used as the
types of values with the `any` keyword.
Protocol methods that return associated types can be called on an `any` type;
the result is type-erased to the associated type's upper bound, which is another
`any` type having the same constraints as the associated type. For example:
```swift
protocol Surface {...}
protocol Solid {
associatedtype SurfaceType: Surface
func boundary() -> SurfaceType
}
let solid: any Solid = ...
// Type of 'boundary' is 'any Surface'
let boundary = solid.boundary()
```
Protocol methods that take an associated type or `Self` cannot be used with `any`,
however in conjunction with [SE-0352][], you can pass the `any` type to a function
taking a generic parameter constrained to the protocol. Within the generic context,
type relationships are explicit and all protocol methods can be used.
* [SE-0346][]:
Protocols can now declare a list of one or more _primary associated types_, which enable writing same-type requirements on those associated types using angle bracket syntax:
```swift
protocol Graph<Vertex, Edge> {
associatedtype Vertex
associatedtype Edge
}
```
You can now write a protocol name followed by type arguments in angle brackets, like
`Graph<Int, String>`, anywhere that a protocol conformance requirement may appear:
```swift
func shortestPath<V, E>(_: some Graph<V, E>, from: V, to: V) -> [E]
extension Graph<Int, String> {...}
func build() -> some Graph<Int, String> {}
```
A protocol name followed by angle brackets is shorthand for a conformance requirement,
together with a same-type requirement for the protocol's primary associated types.
The first two examples above are equivalent to the following:
```swift
func shortestPath<V, E, G>(_: G, from: V, to: V) -> [E]
where G: Graph, G.Vertex == V, G.Edge == E
extension Graph where Vertex == Int, Edge == String {...}
```
The `build()` function returning `some Graph<Int, String>` can't be written using a
`where` clause; this is an example of a constrained opaque result type, which is new expressivity in Swift 5.7.
* [SE-0353][]:
Protocols with primary associated types can now be used in existential types,
enabling same-type constraints on those associated types.
```swift
let strings: any Collection<String> = [ "Hello" ]
```
Note that language features requiring runtime support like dynamic casts
(`is`, `as?`, `as!`), as well as generic usages of parameterized existentials
in generic types (e.g. `Array<any Collection<Int>>`) involve additional
availability checks to use. Back-deploying usages in generic position can be
worked around with a generic type-erasing wrapper struct, which is now much
simpler to implement:
```swift
struct AnyCollection<T> {
var wrapped: any Collection<T>
}
let arrayOfCollections: [AnyCollection<T>] = [ /**/ ]
```
* [SE-0358][]:
Various protocols in the standard library now declare primary associated types, for
example `Sequence` and `Collection` declare a single primary associated type `Element`.
For example, this allows writing down the types `some Collection<Int>` and
`any Collection<Int>`.
* References to `optional` methods on a protocol metatype, as well as references to dynamically looked up methods on `AnyObject` are now supported on par with other function references. The type of such a reference (formerly an immediate optional by mistake) has been altered to that of a function that takes a single argument and returns an optional value of function type:
```swift
class Object {
@objc func getTag() -> Int { ... }
}
let getTag: (AnyObject) -> (() -> Int)? = AnyObject.getTag
@objc protocol Delegate {
@objc optional func didUpdateObject(withTag tag: Int)
}
let didUpdateObjectWithTag: (Delegate) -> ((Int) -> Void)? = Delegate.didUpdateObject
```
> **Warning**
> Due to the type change, selectors for aforementioned method references that require writing out their type explicitly for disambiguation will no longer compile. To fix this, simply adjust the written type, or resort to a `#if swift(<5.7)` directive when compatibility with older compiler versions is warranted. For example:
>
> ```swift
> #if swift(<5.7)
> let decidePolicyForNavigationAction = #selector(WKNavigationDelegate.webView(_:decidePolicyFor:decisionHandler:) as ((WKNavigationDelegate) -> (WKWebView, WKNavigationAction, @escaping (WKNavigationActionPolicy) -> Void) -> Void)?)
> #else
> let decidePolicyForNavigationAction = #selector(WKNavigationDelegate.webView(_:decidePolicyFor:decisionHandler:) as (WKNavigationDelegate) -> ((WKWebView, WKNavigationAction, @escaping (WKNavigationActionPolicy) -> Void) -> Void)?)
> #endif
> ```
* [SE-0349][]:
Loading data from raw memory represented by `UnsafeRawPointer`,
`UnsafeRawBufferPointer` and their mutable counterparts now supports unaligned
accesses. This previously required a workaround involving an intermediate
copy:
```swift
let result = unalignedData.withUnsafeBytes { buffer -> UInt32 in
var storage = UInt32.zero
withUnsafeMutableBytes(of: &storage) {
$0.copyBytes(from: buffer.prefix(MemoryLayout<UInt32>.size))
}
return storage
}
```
Now:
```swift
let result = unalignedData.withUnsafeBytes { $0.loadUnaligned(as: UInt32.self) }
```
Additionally, the counterpart `storeBytes(of:toByteOffset:as:)` had its
alignment restriction lifted, so that storing to arbitrary offsets of raw
memory can now succeed.
* [SE-0334][]:
- `UnsafeRawPointer` and `UnsafeMutableRawPointer` have new functionality for
pointer arithmetic, adding functions to obtain a pointer advanced to the next
or previous alignment boundary:
```swift
extension UnsafeRawPointer {
public func alignedUp<T>(for: T.type) -> UnsafeRawPointer
public func alignedDown<T>(for: T.type) -> UnsafeRawPointer
public func alignedUp(toMultipleOf alignment: Int) -> UnsafeRawPointer
public func alignedDown(toMultipleOf alignment: Int) -> UnsafeRawPointer
}
```
- It is now possible to use a pointer to `struct` to obtain a pointer to one
of its stored properties:
```swift
withUnsafeMutablePointer(to: &myStruct) {
let interiorPointer = $0.pointer(to: \.myProperty)!
return myCFunction(interiorPointer)
}
```
- Comparisons between pointers have been simplified by being more permissive.
Since pointers are representations of memory locations within a single pool of
underlying memory, Swift now allows comparing pointers without requiring type
conversions with the `==`, `!=`, `<`,`<=`,`>`, and `>=` operators.
* [SE-0333][]:
It is now possible to use the `withMemoryRebound<T>()` method on raw memory,
that is `UnsafeRawPointer` , `UnsafeRawBufferPointer` and their mutable
counterparts. Additionally, we clarified the semantics of
`withMemoryRebound<T>()` when used on typed memory (`UnsafePointer<Pointee>`,
`UnsafeBufferPointer<Pointee>` and their mutable counterparts). Whereas
`Pointee` and `T` were previously required to have the same stride, you can
now rebind in cases where `Pointee` is an aggregate of `T` or vice-versa. For
example, given an `UnsafeMutableBufferPointer<CGPoint>`, you can now use
`withMemoryRebound` to operate temporarily on a
`UnsafeMutableBufferPointer<CGFloat>`, because `CGPoint` is an aggregate of
`CGFloat`.
* [SE-0352][]:
It's now possible to call a generic function with a value of protocol type
in places that would previously fail because `any` types do not conform
to their protocols. For example:
```swift
protocol P {
associatedtype A
func getA() -> A
}
func takeP<T: P>(_ value: T) { }
func test(p: any P) {
takeP(p) // was an error "type 'any P' cannot conform to 'P'", now accepted
}
```
This operates by "opening" the value of protocol type and passing the
underlying type directly to the generic function.
* [SE-0347][]:
It's now possible to use a default value expression with a generic parameter type
to default the argument and its type:
```swift
func compute<C: Collection>(_ values: C = [0, 1, 2]) {
...
}
```
`compute` is now accepted by compiler and `[Int]` is going to be inferred
for `C` at call sites that do not provide the argument explicitly.
* [SE-0326][]:
It's now possible to infer parameter and result types from the body of a multi-statement
closure. The distinction between single- and multi-statement closures has been removed.
Use of closures becomes less cumbersome by removing the need to constantly specify explicit
closure types which sometimes could be pretty large e.g. when there are multiple parameters
or a complex tuple result type.
For example:
```swift
func map<T>(fn: (Int) -> T) -> T {
return fn(42)
}
func computeResult<U: BinaryInteger>(_: U) -> U { /* processing */ }
let _ = map {
if let $0 < 0 {
// do some processing
}
return computeResult($0)
}
```
The result type of `map` can now be inferred from the body of the trailing closure
passed as an argument.
* [SE-0345][]:
It is now possible to unwrap optional variables with a shorthand syntax that
shadows the existing declaration. For example, the following:
```swift
let foo: String? = "hello world"
if let foo {
print(foo) // prints "hello world"
}
```
is equivalent to:
```swift
let foo: String? = "hello world"
if let foo = foo {
print(foo) // prints "hello world"
}
```
* [SE-0340][]:
It is now possible to make declarations unavailable from use in asynchronous
contexts with the `@available(*, noasync)` attribute.
This is to protect the consumers of an API against undefined behavior that can
occur when the API uses thread-local storage, or encourages using thread-local
storage, across suspension points, or protect developers against holding locks
across suspension points which may lead to undefined behavior, priority
inversions, or deadlocks.
* [SE-0343][]:
Top-level scripts support asynchronous calls.
Using an `await` by calling an asynchronous function or accessing an isolated
variable transitions the top-level to an asynchronous context. As an
asynchronous context, top-level variables are `@MainActor`-isolated and the
top-level is run on the `@MainActor`.
Note that the transition affects function overload resolution and starts an
implicit run loop to drive the concurrency machinery.
Unmodified scripts are not affected by this change unless `-warn-concurrency` is
passed to the compiler invocation. With `-warn-concurrency`, variables in the
top-level are isolated to the main actor and the top-level context is isolated
to the main actor, but is not an asynchronous context.
* [SE-0336][]:
It is now possible to declare `distributed actor` and `distributed func`s inside of them.
Distributed actors provide stronger isolation guarantees than "local" actors, and enable additional checks to be made on return types and parameters of distributed methods, e.g. checking if they conform to `Codable`. Distributed methods can be called on "remote" references of distributed actors, turning those invocations into remote procedure calls, by means of pluggable and user extensible distributed actor system implementations.
Swift does not provide any specific distributed actor system by itself, however, packages in the ecosystem fulfill the role of providing those implementations.
```swift
distributed actor Greeter {
var greetingsSent = 0
distributed func greet(name: String) -> String {
greetingsSent += 1
return "Hello, \(name)!"
}
}
func talkTo(greeter: Greeter) async throws {
// isolation of distributed actors is stronger, it is impossible to refer to
// any stored properties of distributed actors from outside of them:
greeter.greetingsSent // distributed actor-isolated property 'name' can not be accessed from a non-isolated context
// remote calls are implicitly throwing and async,
// to account for the potential networking involved:
let greeting = try await greeter.greet(name: "Alice")
print(greeting) // Hello, Alice!
}
```
* The compiler now emits a warning when a non-final class conforms to a protocol that imposes a same-type requirement between `Self` and an associated type. This is because such a requirement makes the conformance unsound for subclasses.
For example, Swift 5.6 would allow the following code, which at runtime would construct an instance of `C` and not `SubC` as expected:
```swift
protocol P {
associatedtype A : Q where Self == Self.A.B
}
protocol Q {
associatedtype B
static func getB() -> B
}
class C : P {
typealias A = D
}
class D : Q {
typealias B = C
static func getB() -> C { return C() }
}
extension P {
static func getAB() -> Self {
// This is well-typed, because `Self.A.getB()` returns
// `Self.A.B`, which is equivalent to `Self`.
return Self.A.getB()
}
}
class SubC : C {}
// P.getAB() declares a return type of `Self`, so it should
// return `SubC`, but it actually returns a `C`.
print(SubC.getAB())
```
To make the above example correct, either the class `C` needs to become `final` (in which case `SubC` cannot be declared) or protocol `P` needs to be re-designed to not include the same-type requirement `Self == Self.A.B`.
* [SE-0341][]:
Opaque types can now be used in the parameters of functions and subscripts, when they provide a shorthand syntax for the introduction of a generic parameter. For example, the following:
```swift
func horizontal(_ v1: some View, _ v2: some View) -> some View {
HStack {
v1
v2
}
}
```
is equivalent to
```swift
func horizontal<V1: View, V2: View>(_ v1: V1, _ v2: V2) -> some View {
HStack {
v1
v2
}
}
```
With this, `some` in a parameter type provides a generalization where the
caller chooses the parameter's type as well as its value, whereas `some` in
the result type provides a generalization where the callee chooses the
resulting type and value.
* The compiler now correctly emits errors for `@available` attributes on stored properties with the `lazy` modifier or with attached property wrappers. Previously, the attribute was accepted on this subset of stored properties but the resulting binary would crash at runtime when type metadata was unavailable.
```swift
struct S {
@available(macOS 99, *) // error: stored properties cannot be marked potentially unavailable with '@available'
lazy var a: Int = 42
@available(macOS 99, *) // error: stored properties cannot be marked potentially unavailable with '@available'
@Wrapper var b: Int
}
```
* The compiler now correctly emits warnings for more kinds of expressions where a protocol conformance is used and may be unavailable at runtime. Previously, member reference expressions and type erasing expressions that used potentially unavailable conformances were not diagnosed, leading to potential crashes at runtime.
```swift
struct Pancake {}
protocol Food {}
extension Food {
var isGlutenFree: Bool { false }
}
@available(macOS 12.0, *)
extension Pancake: Food {}
@available(macOS 11.0, *)
func eatPancake(_ pancake: Pancake) {
if (pancake.isGlutenFree) { // warning: conformance of 'Pancake' to 'Food' is only available in macOS 12.0 or newer
eatFood(pancake) // warning: conformance of 'Pancake' to 'Food' is only available in macOS 12.0 or newer
}
}
func eatFood(_ food: Food) {}
```
* [SE-0328][]:
Opaque types (expressed with `some`) can now be used in structural positions
within a result type, including having multiple opaque types in the same
result. For example:
```swift
func getSomeDictionary() -> [some Hashable: some Codable] {
return [ 1: "One", 2: "Two" ]
}
```
## Swift 5.6
### 2022-03-14 (Xcode 13.3)
* [SE-0327][]:
In Swift 5 mode, a warning is now emitted if the default-value expression of an
instance-member property requires global-actor isolation. For example:
```swift
@MainActor
func partyGenerator() -> [PartyMember] { fatalError("todo") }
class Party {
@MainActor var members: [PartyMember] = partyGenerator()
// ^~~~~~~~~~~~~~~~
// warning: expression requiring global actor 'MainActor' cannot
// appear in default-value expression of property 'members'
}
```
Previously, the isolation granted by the type checker matched the isolation of
the property itself, but at runtime that is not guaranteed. In Swift 6,
such default-value expressions will become an error if they require isolation.
* Actor isolation checking now understands that `defer` bodies share the isolation of their enclosing function.
```swift
// Works on global actors
@MainActor
func runAnimation(controller: MyViewController) async {
controller.hasActiveAnimation = true
defer { controller.hasActiveAnimation = false }
// do the animation here...
}
// Works on actor instances
actor OperationCounter {
var activeOperationCount = 0
func operate() async {
activeOperationCount += 1
defer { activeOperationCount -= 1 }
// do work here...
}
}
```
* [SE-0335][]:
Swift now allows existential types to be explicitly written with the `any`
keyword, creating a syntactic distinction between existential types and
protocol conformance constraints. For example:
```swift
protocol P {}
func generic<T>(value: T) where T: P {
...
}
func existential(value: any P) {
...
}
```
* [SE-0337][]:
Swift now provides an incremental migration path to data race safety, allowing
APIs to adopt concurrency without breaking their clients that themselves have
not adopted concurrency. An existing declaration can introduce
concurrency-related annotations (such as making its closure parameters
`@Sendable`) and use the `@preconcurrency` attribute to maintain its behavior
for clients who have not themselves adopted concurrency:
```swift
// module A
@preconcurrency func runOnSeparateTask(_ workItem: @Sendable () -> Void)
// module B
import A
class MyCounter {
var value = 0
}
func doesNotUseConcurrency(counter: MyCounter) {
runOnSeparateTask {
counter.value += 1 // no warning, because this code hasn't adopted concurrency
}
}
func usesConcurrency(counter: MyCounter) async {
runOnSeparateTask {
counter.value += 1 // warning: capture of non-Sendable type 'MyCounter'
}
}
```
One can enable warnings about data race safety within a module with the
`-warn-concurrency` compiler option. When using a module that does not yet
provide `Sendable` annotations, one can suppress warnings for types from that
module by marking the import with `@preconcurrency`:
```swift
/// module C
public struct Point {
public var x, y: Double
}
// module D
@preconcurrency import C
func centerView(at location: Point) {
Task {
await mainView.center(at: location) // no warning about non-Sendable 'Point' because the @preconcurrency import suppresses it
}
}
```
* [SE-0302][]:
Swift will now produce warnings to indicate potential data races when
non-`Sendable` types are passed across actor or task boundaries. For
example:
```swift
class MyCounter {
var value = 0
}
func f() -> MyCounter {
let counter = MyCounter()
Task {
counter.value += 1 // warning: capture of non-Sendable type 'MyCounter'
}
return counter
}
```
* [SE-0331][]:
The conformance of the unsafe pointer types (e.g., `UnsafePointer`,
`UnsafeMutableBufferPointer`) to the `Sendable` protocols has been removed,
because pointers cannot safely be transferred across task or actor boundaries.
* References to `Self` or so-called "`Self` requirements" in the type signatures
of protocol members are now correctly detected in the parent of a nested type.
As a result, protocol members that fall under this overlooked case are no longer
available on values of protocol type:
```swift
struct Outer<T> {
struct Inner {}
}
protocol P {}
extension P {
func method(arg: Outer<Self>.Inner) {}
}
func test(p: P) {
// error: 'method' has a 'Self' requirement and cannot be used on a value of
// protocol type (use a generic constraint instead).
_ = p.method
}
```
* [SE-0324][]:
Relax diagnostics for pointer arguments to C functions. The Swift
compiler now accepts limited pointer type mismatches when directly
calling functions imported from C as long as the C language allows
those pointer types to alias. Consequently, any Swift
`Unsafe[Mutable]Pointer<T>` or `Unsafe[Mutable]RawPointer` may be
passed to C function arguments declared as `[signed|unsigned] char
*`. Swift `Unsafe[Mutable]Pointer<T>` can also be passed to C
function arguments with an integer type that differs from `T` only
in its signedness.
For example, after importing a C function declaration:
```c
long long decode_int64(const char *ptr_to_int64);
```
Swift can now directly pass a raw pointer as the function argument:
```swift
func decodeAsInt64(data: Data) -> Int64 {
data.withUnsafeBytes { (bytes: UnsafeRawBufferPointer) in
decode_int64(bytes.baseAddress!)
}
}
```
* [SE-0322][]:
The standard library now provides a new operation
`withUnsafeTemporaryAllocation` which provides an efficient temporarily
allocation within a limited scope, which will be optimized to use stack
allocation when possible.
* [SE-0320][]:
Dictionaries with keys of any type conforming to the new protocol
`CodingKeyRepresentable` can now be encoded and decoded. Formerly, encoding
and decoding was limited to keys of type `String` or `Int`.
* [SE-0315][]:
Type expressions and annotations can now include "type placeholders" which
directs the compiler to fill in that portion of the type according to the usual
type inference rules. Type placeholders are spelled as an underscore ("`_`") in
a type name. For instance:
```swift
// This is OK--the compiler can infer the key type as `Int`.
let dict: [_: String] = [0: "zero", 1: "one", 2: "two"]
```
* [SE-0290][]:
It is now possible to write inverted availability conditions by using the new `#unavailable` keyword:
```swift
if #unavailable(iOS 15.0) {
// Old functionality
} else {
// iOS 15 functionality
}
```
## Swift 5.5
### 2021-09-20 (Xcode 13.0)
* [SE-0323][]:
The main function is executed with `MainActor` isolation applied, so functions
and variables with `MainActor` isolation may be called and modified
synchronously from the main function. If the main function is annotated with a
global actor explicitly, it must be the main actor or an error is emitted. If
no global actor annotation is present, the main function is implicitly run on
the main actor.
The main function is executed synchronously up to the first suspension point.
Any tasks enqueued by initializers in Objective-C or C++ will run after the
main function runs to the first suspension point. At the suspension point, the
main function suspends and the tasks are executed according to the Swift
concurrency mechanisms.
* [SE-0313][]:
Parameters of actor type can be declared as `isolated`, which means that they
represent the actor on which that code will be executed. `isolated` parameters
extend the actor-isolated semantics of the `self` parameter of actor methods
to arbitrary parameters. For example:
```swift
actor MyActor {
func f() { }
}
func g(actor: isolated MyActor) {
actor.f() // okay, this code is always executing on "actor"
}
func h(actor: MyActor) async {
g(actor: actor) // error, call must be asynchronous
await g(actor: actor) // okay, hops to "actor" before calling g
}
```
The `self` parameter of actor methods are implicitly `isolated`. The
`nonisolated` keyword makes the `self` parameter no longer `isolated`.
* [#57081][]:
The compiler now correctly rejects the application of generic arguments to the
special `Self` type:
```swift
struct Box<T> {
// previously interpreted as a return type of Box<T>, ignoring the <Int> part;
// now we diagnose an error with a fix-it suggesting replacing `Self` with `Box`
static func makeBox() -> Self<Int> {...}
}
```
* [#57225][]:
The compiler now correctly rejects `@available` annotations on enum cases with
associated values with an OS version newer than the current deployment target:
```swift
@available(macOS 12, *)
public struct Crayon {}
public enum Pen {
case pencil
@available(macOS 12, *)
case crayon(Crayon)
}
```
While this worked with some examples, there is no way for the Swift runtime to
perform the requisite dynamic layout needed to support this in general, which
could cause crashes at runtime.
Note that conditional availability on stored properties in structs and classes
is not supported for similar reasons; it was already correctly detected and
diagnosed.
* [SE-0311][]:
Task local values can be defined using the new `@TaskLocal` property wrapper.
Such values are carried implicitly by the task in which the binding was made,
as well as any child-tasks, and unstructured task created from the tasks context.
```swift
struct TraceID {
@TaskLocal
static var current: TraceID?
}
func printTraceID() {
if let traceID = TraceID.current {
print("\(traceID)")
} else {
print("nil")
}
}
func run() async {
printTraceID() // prints: nil
TraceID.$current.withValue("1234-5678") {
printTraceID() // prints: 1234-5678
inner() // prints: 1234-5678
}
printTraceID() // prints: nil
}
func inner() {
// if called from a context in which the task-local value
// was bound, it will print it (or 'nil' otherwise)
printTraceID()
}
```
* [SE-0316][]:
A type can be defined as a global actor. Global actors extend the notion
of actor isolation outside of a single actor type, so that global state
(and the functions that access it) can benefit from actor isolation,
even if the state and functions are scattered across many different
types, functions and modules. Global actors make it possible to safely
work with global variables in a concurrent program, as well as modeling
other global program constraints such as code that must only execute on
the "main thread" or "UI thread". A new global actor can be defined with
the `globalActor` attribute:
```swift
@globalActor
struct DatabaseActor {
actor ActorType { }
static let shared: ActorType = ActorType()
}
```
Global actor types can be used as custom attributes on various declarations,
which ensures that those declarations are only accessed on the actor described
by the global actor's `shared` instance. For example:
```swift
@DatabaseActor func queryDB(query: Query) throws -> QueryResult
func runQuery(queryString: String) async throws -> QueryResult {
let query = try Query(parsing: queryString)
return try await queryDB(query: query) // 'await' because this implicitly hops to DatabaseActor.shared
}
```
The concurrency library defines one global actor, `MainActor`, which
represents the main thread of execution. It should be used for any code that
must execute on the main thread, e.g., for updating UI.
* [SE-0313][]:
Declarations inside an actor that would normally be actor-isolated can
explicitly become non-isolated using the `nonisolated` keyword. Non-isolated
declarations can be used to conform to synchronous protocol requirements:
```swift
actor Account: Hashable {
let idNumber: Int
var balance: Double
nonisolated func hash(into hasher: inout Hasher) { // okay, non-isolated satisfies synchronous requirement
hasher.combine(idNumber) // okay, can reference idNumber from outside the let
hasher.combine(balance) // error: cannot synchronously access actor-isolated property
}
}
```
* [SE-0300][]:
Async functions can now be suspended using the `withUnsafeContinuation`
and `withUnsafeThrowingContinuation` functions. These both take a closure,
and then suspend the current async task, executing that closure with a
continuation value for the current task. The program must use that
continuation at some point in the future to resume the task, passing in
a value or error, which then becomes the result of the `withUnsafeContinuation`
call in the resumed task.
* Type names are no longer allowed as an argument to a subscript parameter that expects a metatype type
```swift
struct MyValue {
}
struct MyStruct {
subscript(a: MyValue.Type) -> Int { get { ... } }
}
func test(obj: MyStruct) {
let _ = obj[MyValue]
}
```
Accepting subscripts with `MyValue` as an argument was an oversight because `MyValue` requires explicit `.self`
to reference its metatype, so correct syntax would be to use `obj[MyValue.self]`.
* [SE-0310][]:
Read-only computed properties and subscripts can now define their `get` accessor to be `async` and/or `throws`, by writing one or both of those keywords between the `get` and `{`. Thus, these members can now make asynchronous calls or throw errors in the process of producing a value:
```swift
class BankAccount: FinancialAccount {
var manager: AccountManager?
var lastTransaction: Transaction {
get async throws {
guard manager != nil else { throw BankError.notInYourFavor }
return await manager!.getLastTransaction()
}
}
subscript(_ day: Date) -> [Transaction] {
get async {
return await manager?.getTransactions(onDay: day) ?? []
}
}
}
protocol FinancialAccount {
associatedtype T
var lastTransaction: T { get async throws }
subscript(_ day: Date) -> [T] { get async }
}
```
Accesses to such members, like `lastTransaction` above, will require appropriate marking with `await` and/or `try`:
```swift
extension BankAccount {
func meetsTransactionLimit(_ limit: Amount) async -> Bool {
return try! await self.lastTransaction.amount < limit
// ^~~~~~~~~~~~~~~~ this access is async & throws
}
}
func hadWithdrawalOn(_ day: Date, from acct: BankAccount) async -> Bool {
return await !acct[day].allSatisfy { $0.amount >= Amount.zero }
// ^~~~~~~~~ this access is async
}
```
* [SE-0306][]:
Swift 5.5 includes support for actors, a new kind of type that isolates its instance data to protect it from concurrent access. Accesses to an actor's instance declarations from outside the must be asynchronous:
```swift
actor Counter {
var value = 0
func increment() {
value = value + 1
}
}
func useCounter(counter: Counter) async {
print(await counter.value) // interaction must be async
await counter.increment() // interaction must be async
}
```
* The determination of whether a call to a `rethrows` function can throw now considers default arguments of `Optional` type.
In Swift 5.4, such default arguments were ignored entirely by `rethrows` checking. This meant that the following example was accepted:
```swift
func foo(_: (() throws -> ())? = nil) rethrows {}
foo() // no 'try' needed
```
However, it also meant that the following was accepted, even though the call to `foo()` can throw and the call site is not marked with `try`:
```swift
func foo(_: (() throws -> ())? = { throw myError }) rethrows {}
foo() // 'try' *should* be required here
```
The new behavior is that the first example is accepted because the default argument is syntactically written as `nil`, which is known not to throw. The second example is correctly rejected, on account of missing a `try` since the default argument *can* throw.
* [SE-0293][]:
Property wrappers can now be applied to function and closure parameters:
```swift
@propertyWrapper
struct Wrapper<Value> {
var wrappedValue: Value
var projectedValue: Self { return self }
init(wrappedValue: Value) { ... }
init(projectedValue: Self) { ... }
}
func test(@Wrapper value: Int) {
print(value)
print($value)
print(_value)
}
test(value: 10)
let projection = Wrapper(wrappedValue: 10)
test($value: projection)
```
The call-site can pass a wrapped value or a projected value, and the property wrapper will be initialized using `init(wrappedValue:)` or `init(projectedValue:)`, respectively.
* [SE-0299][]:
It is now possible to use leading-dot syntax in generic contexts to access static members of protocol extensions where `Self` is constrained to a fully concrete type:
```swift
public protocol ToggleStyle { ... }
public struct DefaultToggleStyle: ToggleStyle { ... }
extension ToggleStyle where Self == DefaultToggleStyle {
public static var `default`: Self { .init() }
}
struct Toggle {
func applyToggle<T: ToggleStyle>(_ style: T) { ... }
}
Toggle(...).applyToggle(.default)
```
* Whenever a reference to `Self` does not impede the usage of a protocol as a value type, or a protocol member on a value of protocol type, the same is now true for references to `[Self]` and `[Key : Self]`:
```swift
protocol Copyable {
func copy() -> Self
func copy(count: Int) -> [Self]
}
func test(c: Copyable) {
let copy: Copyable = c.copy() // OK
let copies: [Copyable] = c.copy(count: 5) // also OK
}
```
* [SE-0296][]:
Asynchronous programming is now natively supported using async/await. Asynchronous functions can be defined using `async`:
```swift
func loadWebResource(_ path: String) async throws -> Resource { ... }
func decodeImage(_ r1: Resource, _ r2: Resource) async throws -> Image
func dewarpAndCleanupImage(_ i : Image) async -> Image
```
Calls to `async` functions may suspend, meaning that they give up the thread on which they are executing and will be scheduled to run again later. The potential for suspension on asynchronous calls requires the `await` keyword, similarly to the way in which `try` acknowledges a call to a `throws` function:
```swift
func processImageData() async throws -> Image {
let dataResource = try await loadWebResource("dataprofile.txt")
let imageResource = try await loadWebResource("imagedata.dat")
let imageTmp = try await decodeImage(dataResource, imageResource)
let imageResult = await dewarpAndCleanupImage(imageTmp)
return imageResult
}
```
* The `lazy` keyword now works in local contexts, making the following valid:
```swift
func test(useIt: Bool) {
lazy var result = getPotentiallyExpensiveResult()
if useIt {
doIt(result)
}
}
```
* [SE-0297][]:
An Objective-C method that delivers its results asynchronously via a completion handler block will be translated into an `async` method that directly returns the result (or throws). For example, the following Objective-C method from [CloudKit](https://developer.apple.com/documentation/cloudkit/ckcontainer/1640387-fetchshareparticipantwithuserrec):
```objc
- (void)fetchShareParticipantWithUserRecordID:(CKRecordID *)userRecordID
completionHandler:(void (^)(CKShareParticipant * _Nullable, NSError * _Nullable))completionHandler;
```
will be translated into an `async throws` method that returns the participant instance:
```swift
func fetchShareParticipant(
withUserRecordID userRecordID: CKRecord.ID
) async throws -> CKShare.Participant
```
Swift callers can invoke this `async` method within an `await` expression:
```swift
guard let participant = try? await container.fetchShareParticipant(withUserRecordID: user) else {
return nil
}
```
* [SE-0298][]:
The "for" loop can be used to traverse asynchronous sequences in asynchronous code:
```swift
for try await line in myFile.lines() {
// Do something with each line
}
```
Asynchronous for loops use asynchronous sequences, defined by the protocol
`AsyncSequence` and its corresponding `AsyncIterator`.
## Swift 5.4
### 2021-04-26 (Xcode 12.5)
* Protocol conformance checking now considers `where` clauses when evaluating if a `typealias` is a suitable witness for an associated type requirement. The following code is now rejected:
```swift
protocol Holder {
associatedtype Contents
}
struct Box<T> : Holder {}
// error: type 'Box<T>' does not conform to protocol 'Holder'
extension Box where T : Hashable {
typealias Contents = T
}
```
In most cases, the compiler would either crash or produce surprising results when making use of a `typealias` with an unsatisfied `where` clause, but it is possible that some previously-working code is now rejected. In the above example, the conformance can be fixed in one of various ways:
1) making it conditional (moving the `: Holder` from the definition of `Box` to the extension)
2) moving the `typealias` from the extension to the type itself
3) relaxing the `where` clause on the extension
* Availability checking now rejects protocols that refine less available protocols. Previously, this was accepted by the compiler but could result in linker errors or runtime crashes:
```swift
@available(macOS 11, *)
protocol Base {}
protocol Bad : Base {}
// error: 'Base' is only available in macOS 11 or newer
@available(macOS 11, *)
protocol Good : Base {} // OK
```
* The `@available` attribute is no longer permitted on generic parameters, where it had no effect:
```swift
struct Bad<@available(macOS 11, *) T> {}
// error: '@available' attribute cannot be applied to this declaration
struct Good<T> {} // equivalent
```
* If a type is made to conform to a protocol via an extension, the availability of the extension is now taken into account when forming generic types that use this protocol conformance. For example, consider a `Box` type whose conformance to `Hashable` uses features only available on macOS 11:
```swift
public struct Box {}
@available(macOS 11, *)
extension Box : Hashable {
func hash(into: inout Hasher) {
// call some new API to hash the value...
}
}
public func findBad(_: Set<Box>) -> Box {}
// warning: conformance of 'Box' to 'Hashable' is only available in macOS 11 or newer
@available(macOS 11, *)
public func findGood(_: Set<Box>) -> Box {} // OK
```
In the above code, it is not valid for `findBad()` to take a `Set<Box>`, since `Set` requires that its element type conform to `Hashable`; however the conformance of `Box` to `Hashable` is not available prior to macOS 11.
Note that using an unavailable protocol conformance is a warning, not an error, to avoid potential source compatibility issues. This is because it was technically possible to write code in the past that made use of unavailable protocol conformances but worked anyway, if the optimizer had serendipitously eliminated all runtime dispatch through this conformance, or the code in question was entirely unreachable at runtime.
Protocol conformances can also be marked as completely unavailable or deprecated, by placing an appropriate `@available` attribute on the extension:
```swift
@available(*, unavailable, message: "Not supported anymore")
extension Box : Hashable {}
@available(*, deprecated, message: "Suggest using something else")
extension Box : Hashable {}
```
If a protocol conformance is defined on the type itself, it inherits availability from the type. You can move the protocol conformance to an extension if you need it to have narrower availability than the type.
* When `swift` is run with no arguments, it starts a REPL (read eval print loop) that uses LLDB. The compiler also had a second REPL implementation, known as the "integrated REPL", formerly accessible by running `swift -frontend -repl`. The "integrated REPL" was only intended for use by compiler developers, and has now been removed.
Note that this does not take away the ability to put Swift code in a script and run it with `swift myScript.swift`. This so-called "script mode" is distinct from the integrated REPL, and continues to be supported.
* Property wrappers now work in local contexts, making the following valid:
```swift
@propertyWrapper
struct Wrapper<T> {
var wrappedValue: T
}
func test() {
@Wrapper var value = 10
}
```
* [#52471][]:
Function overloading now works in local contexts, making the following valid:
```swift
func outer(x: Int, y: String) {
func doIt(_: Int) {}
func doIt(_: String) {}
doIt(x) // calls the first 'doIt(_:)' with an Int value
doIt(y) // calls the second 'doIt(_:)' with a String value
}
```
* [SE-0284][]:
Functions, subscripts, and initializers may now have more than one variadic parameter, as long as all parameters which follow variadic parameters are labeled. This makes declarations like the following valid:
```swift
func foo(_ a: Int..., b: Double...) { }
struct Bar {
subscript(a: Int..., b b: Int...) -> [Int] { a + b }
init(a: String..., b: Float...) { }
}
```
* [SE-0287][]:
Implicit member expressions now support chains of member accesses, making the following valid:
```swift
let milky: UIColor = .white.withAlphaComponent(0.5)
let milky2: UIColor = .init(named: "white")!.withAlphaComponent(0.5)
let milkyChance: UIColor? = .init(named: "white")?.withAlphaComponent(0.5)
```
As is the case with the existing implicit member expression syntax, the resulting type of the chain must be the same as the (implicit) base, so it is not well-formed to write:
```swift
let cgMilky: CGColor = .white.withAlphaComponent(0.5).cgColor
```
(Unless, of course, appropriate `white` and `withAlphaComponent` members were defined on `CGColor`.)
Members of a "chain" can be properties, method calls, subscript accesses, force unwraps, or optional chaining question marks. Furthermore, the type of each member along the chain is permitted to differ (again, as long as the base of the chain matches the resulting type) meaning the following successfully typechecks:
```swift
struct Foo {
static var foo = Foo()
static var bar = Bar()
var anotherFoo: Foo { Foo() }
func getFoo() -> Foo { Foo() }
var optionalFoo: Foo? { Foo() }
subscript() -> Foo { Foo() }
}
struct Bar {
var anotherFoo = Foo()
}
let _: Foo? = .bar.anotherFoo.getFoo().optionalFoo?.optionalFoo![]
```
## Swift 5.3
### 2020-09-16 (Xcode 12.0)
* [SE-0279][] & [SE-0286][]:
Trailing closure syntax has been extended to allow additional labeled closures to follow the initial unlabeled closure:
```swift
// Single trailing closure argument
UIView.animate(withDuration: 0.3) {
self.view.alpha = 0
}
// Multiple trailing closure arguments
UIView.animate(withDuration: 0.3) {
self.view.alpha = 0
} completion: { _ in
self.view.removeFromSuperview()
}
```
Additionally, trailing closure arguments now match the appropriate parameter according to a forward-scan rule (as opposed to the previous backward-scan rule):
```swift
func takesClosures(first: () -> Void, second: (Int) -> Void = { _ in }) {}
takesClosures {
print("First")
}
```
In the above example, the trailing closure argument matches parameter `first`, whereas pre-Swift-5.3 it would have matched `second`. In order to ease the transition to this new rule, cases in which the forward-scan and backward-scan match a single trailing closure to different parameters, the backward-scan result is preferred and a warning is emitted. This is expected to be upgraded to an error in the next major version of Swift.
* [#49631][]:
Property observers such as `willSet` and `didSet` are now supported on `lazy` properties:
```swift
class C {
lazy var property: Int = 0 {
willSet { print("willSet called!") } // Okay
didSet { print("didSet called!") } // Okay
}
}
```
Note that the initial value of the property will be forced and made available as the `oldValue` for the `didSet` observer, if the property hasn't been accessed yet.
```swift
class C {
lazy var property: Int = 0 {
didSet { print("Old value: ", oldValue) }
}
}
let c = C()
c.property = 1 // Prints 'Old value: 0'
```
This could have side-effects, for example if the lazy property's initializer is doing other work.
* [#54108][]:
Exclusivity violations within code that computes the `default`
argument during Dictionary access are now diagnosed.
```swift
struct Container {
static let defaultKey = 0
var dictionary = [defaultKey:0]
mutating func incrementValue(at key: Int) {
dictionary[key, default: dictionary[Container.defaultKey]!] += 1
}
}
// error: overlapping accesses to 'self.dictionary', but modification requires exclusive access; consider copying to a local variable
// dictionary[key, default: dictionary[Container.defaultKey]!] += 1
// ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// note: conflicting access is here
// dictionary[key, default: dictionary[Container.defaultKey]!] += 1
// ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
```
The exclusivity violation can be avoided by precomputing the `default`
argument using a local variable.
```swift
struct Container {
static let defaultKey = 0
var dictionary = [defaultKey:0]
mutating func incrementValue(at key: Int) {
let defaultValue = dictionary[Container.defaultKey]!
dictionary[key, default: defaultValue] += 1
}
}
// No error.
```
* [SE-0268][]:
A `didSet` observer which does not refer to the `oldValue` in its body or does not explicitly request it by placing it in the parameter list (i.e. `didSet(oldValue)`) will no longer trigger a call to the property getter to fetch the `oldValue`.
```swift
class C {
var value: Int = 0 {
didSet { print("didSet called!") }
}
}
let c = C()
// This does not trigger a call to the getter for 'value'
// because the 'didSet' observer on 'value' does not
// refer to the 'oldValue' in its body, which means
// the 'oldValue' does not need to be fetched.
c.value = 1
```
* [SE-0276][]:
Catch clauses in a `do`-`catch` statement can now include multiple patterns in a comma-separated list. The body of a `catch` clause will be executed if a thrown error matches any of its patterns.
```swift
do {
try performTask()
} catch TaskError.someFailure(let msg),
TaskError.anotherFailure(let msg) {
showMessage(msg)
}
```
* [SE-0280][]:
Enum cases can now satisfy static protocol requirements. A static get-only property of type `Self` can be witnessed by an enum case with no associated values and a static function with arguments and returning `Self` can be witnessed by an enum case with associated values.
```swift
protocol P {
static var foo: Self { get }
static func bar(value: Int) -> Self
}
enum E: P {
case foo // matches 'static var foo'
case bar(value: Int) // matches 'static func bar(value:)'
}
```
* [SE-0267][]:
Non-generic members that support a generic parameter list, including nested type declarations, are now allowed to carry a contextual `where` clause against outer generic parameters. Previously, such declarations could only be expressed by placing the member inside a dedicated constrained extension.
```swift
struct Box<Wrapped> {
func boxes() -> [Box<Wrapped.Element>] where Wrapped: Sequence { ... }
}
```
Since contextual `where` clauses are effectively visibility constraints, overrides adopting this feature must be at least as visible as the overridden method. In practice, this implies any instance of `Derived` that can access `Base.foo` must also be able to access `Derived.foo`.
```swift
class Base<T> {
func foo() where T == Int { ... }
}
class Derived<U>: Base<U> {
// OK, <U where U: Equatable> has broader visibility than <T where T == Int>
override func foo() where U: Equatable { ... }
}
* [#42697][]:
Unapplied references to protocol methods are now supported. Previously this
only worked for methods defined in structs, enums and classes.
```swift
protocol Cat {
func play(catToy: Toy)
}
let fn = Cat.play(catToy:)
fn(myCat)(myToy)
```
* [SE-0266][]:
Enumerations with no associated values, or only `Comparable` associated values, can opt-in to synthesized `Comparable` conformance by declaring conformance to the `Comparable` protocol. The synthesized implementation orders the cases first by case-declaration order, and then by lexicographic order of the associated values (if any).
```swift
enum Foo: Comparable {
case a(Int), b(Int), c
}
// .a(0) < .a(1) < .b(0) < .b(1) < .c
```
* [SE-0269][]:
When an escaping closure explicitly captures `self` in its capture list, the
use of implicit `self` is enabled within that closure. This means that the
following code is now valid:
```swift
func doStuff(_ stuff: @escaping () -> Void) {}
class C {
var x = 0
func method() {
doStuff { [self] in
x += 1
}
}
}
```
This proposal also introduces new diagnostics for inserting `self` into the
closure's capture list in addition to the existing 'use `self.` explicitly'
fix-it.
## Swift 5.2
### 2020-03-24 (Xcode 11.4)
* [#54246][]:
When chaining calls to `filter(_:)` on a lazy sequence or collection, the
filtering predicates will now be called in the same order as eager filters.
```swift
let evens = (1...10).lazy
.filter { $0.isMultiple(of: 2) }
.filter { print($0); return true }
_ = evens.count
// Prints 2, 4, 6, 8, and 10 on separate lines
```
Previously, the predicates were called in reverse order.
* [apple/swift-corelibs-foundation#4326][]:
The compiler will now emit a warning when attempting to pass a temporary
pointer argument produced from an array, string, or inout argument to a
parameter which is known to escape it. This includes the various initializers
for the `UnsafePointer`/`UnsafeBufferPointer` family of types, as well as
memberwise initializers.
```swift
struct S {
var ptr: UnsafePointer<Int8>
}
func foo() {
var i: Int8 = 0
let ptr = UnsafePointer(&i)
// warning: initialization of 'UnsafePointer<Int8>' results in a
// dangling pointer
let s1 = S(ptr: [1, 2, 3])
// warning: passing '[Int8]' to parameter, but argument 'ptr' should be a
// pointer that outlives the call to 'init(ptr:)'
let s2 = S(ptr: "hello")
// warning: passing 'String' to parameter, but argument 'ptr' should be a
// pointer that outlives the call to 'init(ptr:)'
}
```
All 3 of the above examples are unsound because each argument produces a
temporary pointer only valid for the duration of the call they are passed to.
Therefore the returned value in each case references a dangling pointer.
* [#44797][]:
The compiler now supports local functions whose default arguments capture
values from outer scopes.
```swift
func outer(x: Int) -> (Int, Int) {
func inner(y: Int = x) -> Int {
return y
}
return (inner(), inner(y: 0))
}
```
* [#53830][]:
The compiler will now correctly strip argument labels from function references
used with the `as` operator in a function call. As a result, the `as` operator
can now be used to disambiguate a call to a function with argument labels.
```swift
func foo(x: Int) {}
func foo(x: UInt) {}
(foo as (Int) -> Void)(5) // Calls foo(x: Int)
(foo as (UInt) -> Void)(5) // Calls foo(x: UInt)
```
Previously this was only possible for functions without argument labels.
This change also means that a generic type alias can no longer be used to
preserve the argument labels of a function reference through the `as`
operator. The following is now rejected:
```swift
typealias Magic<T> = T
func foo(x: Int) {}
(foo as Magic)(x: 5) // error: Extraneous argument label 'x:' in call
```
The function value must instead be called without argument labels:
```swift
(foo as Magic)(5)
```
* [#53699][]:
A class-constrained protocol extension, where the extended protocol does
not impose a class constraint, will now infer the constraint implicitly.
```swift
protocol Foo {}
class Bar: Foo {
var someProperty: Int = 0
}
// Even though 'Foo' does not impose a class constraint, it is automatically
// inferred due to the Self: Bar constraint.
extension Foo where Self: Bar {
var anotherProperty: Int {
get { return someProperty }
// As a result, the setter is now implicitly nonmutating, just like it would
// be if 'Foo' had a class constraint.
set { someProperty = newValue }
}
}
```
* [SE-0253][]:
Values of types that declare `func callAsFunction` methods can be called
like functions. The call syntax is shorthand for applying
`func callAsFunction` methods.
```swift
struct Adder {
var base: Int
func callAsFunction(_ x: Int) -> Int {
return x + base
}
}
var adder = Adder(base: 3)
adder(10) // returns 13, same as `adder.callAsFunction(10)`
```
* `func callAsFunction` argument labels are required at call sites.
* Multiple `func callAsFunction` methods on a single type are supported.
* `mutating func callAsFunction` is supported.
* `func callAsFunction` works with `throws` and `rethrows`.
* `func callAsFunction` works with trailing closures.
* [SE-0249][]:
A `\Root.value` key path expression is now allowed wherever a `(Root) -> Value`
function is allowed. Such an expression is implicitly converted to a key path
application of `{ $0[keyPath: \Root.value] }`.
For example:
```swift
struct User {
let email: String
let isAdmin: Bool
}
users.map(\.email) // this is equivalent to: users.map { $0[keyPath: \User.email] }
```
* [#46789][]:
A method override is no longer allowed to have a generic signature with
requirements not imposed by the base method. For example:
```swift
protocol P {}
class Base {
func foo<T>(arg: T) {}
}
class Derived: Base {
override func foo<T: P>(arg: T) {}
}
```
will now be diagnosed as an error.
* [#48673][]:
Subscripts can now declare default arguments:
```swift
struct Subscriptable {
subscript(x: Int, y: Int = 0) {
...
}
}
let s = Subscriptable()
print(s[0])
```
## Swift 5.1
### 2019-09-20 (Xcode 11.0)
* [#51478][]:
Duplicate tuple element labels are no longer allowed, because it leads
to incorrect behavior. For example:
```swift
let dupLabels: (foo: Int, foo: Int) = (foo: 1, foo: 2)
enum Foo { case bar(x: Int, x: Int) }
let f: Foo = .bar(x: 0, x: 1)
```
will now be diagnosed as an error.
Note: You can still use duplicate argument labels when declaring functions and
subscripts, as long as the internal parameter names are different. For example:
```swift
func foo(bar x: Int, bar y: Int) {}
subscript(a x: Int, a y: Int) -> Int {}
```
* [SE-0244][]:
Functions can now hide their concrete return type by declaring what protocols
it conforms to instead of specifying the exact return type:
```swift
func makeMeACollection() -> some Collection {
return [1, 2, 3]
}
```
Code that calls the function can use the interface of the protocol, but
does not have visibility into the underlying type.
* [SE-0254][]:
Subscripts can now be declared `static` or (inside classes) `class`.
* [SE-0252][]:
The existing `@dynamicMemberLookup` attribute has been extended with a
support for strongly-typed keypath implementations:
```swift
@dynamicMemberLookup
struct Lens<T> {
let getter: () -> T
let setter: (T) -> Void
var value: T {
get {
return getter()
}
set {
setter(newValue)
}
}
subscript<U>(dynamicMember keyPath: WritableKeyPath<T, U>) -> Lens<U> {
return Lens<U>(
getter: { self.value[keyPath: keyPath] },
setter: { self.value[keyPath: keyPath] = $0 })
}
}
```
* [#51064][], [#51546][]:
More thorough checking has been implemented for restrictions around
escaping closures capturing `inout` parameters or values of noescape type.
While most code should not be affected, there are edge cases where
the Swift 5.0 compiler would accept code violating these restrictions.
This could result in runtime crashes or silent data corruption.
An example of invalid code which was incorrectly accepted by the Swift 5.0
compiler is an `@escaping` closure calling a local function which
references an `inout` parameter from an outer scope:
```swift
struct BadCaptureExample {
var escapingClosure: () -> ()
mutating func takesInOut(_ x: inout Int) {
func localFunction() {
x += 1
}
escapingClosure = { localFunction() }
}
}
```
The compiler now correctly diagnoses the above code by pointing out that
the capture of `x` by `localFunction()` is invalid, since `localFunction()`
is referenced from an `@escaping` closure.
This also addresses certain cases where the compiler incorrectly diagnosed
certain code as invalid, when in fact no violation of restrictions had
taken place. For example,
```swift
func takesNoEscape(_ fn: () -> ()) {
func localFunction() {
fn()
}
{ localFunction() }()
}
```
* [#45277][]:
Conversions between tuple types are now fully implemented.
Previously, the following would diagnose an error:
```swift
let values: (Int, Int) = (10, 15)
let converted: (Int?, Any) = values
* [SE-0242][]:
The memberwise initializer for structures now provide default values for variables that hold default expressions.
```swift
struct Dog {
var name = "Generic dog name"
var age = 0
// The synthesized memberwise initializer
init(name: String = "Generic dog name", age: Int = 0)
}
let sparky = Dog(name: "Sparky") // Dog(name: "Sparky", age: 0)
```
* [SE-0068][]:
It is now possible to use `Self` to refer to the innermost nominal
type inside struct, enum and class declarations. For example, the
two method declarations inside this struct are equivalent:
```swift
struct Box<Value> {
func transform1() -> Self { return self }
func transform2() -> Box<Value> { return self }
}
```
In classes, `Self` is the dynamic type of the `self` value, as before.
Existing restrictions on `Self` in declaration types still apply;
that is, `Self` can only appear as the return type of a method.
However, `Self` can now be used inside the body of a method
without limitation.
* [#50338][]:
Enum cases can now be matched against an optional enum without
requiring a '?' at the end of the pattern.
```swift
enum Foo { case zero, one }
let foo: Foo? = .zero
switch foo {
case .zero: break
case .one: break
case .none: break
}
```
* [#52244][]:
`weak` and `unowned` stored properties no longer inhibit the
automatic synthesis of `Equatable` or `Hashable` conformance.
* [#45293][]:
An `@autoclosure` parameter can now be declared with a typealias type.
```swift
class Foo {
typealias FooClosure = () -> String
func fooFunction(closure: @autoclosure FooClosure) {}
}
```
* [#50143][]:
Methods declared `@objc` inside a class can now return `Self`:
```swift
class MyClass : NSObject {
@objc func clone() -> Self { return self }
}
```
* [#44784][]:
Assigning '.none' to an optional enum which also has a 'none' case
or comparing such an enum with '.none' will now warn. Such expressions
create an ambiguity because the compiler chooses Optional.none
over Foo.none.
```swift
enum Foo { case none }
// Assigned Optional.none instead of Foo.none
let foo: Foo? = .none
// Comparing with Optional.none instead of Foo.none
let isEqual = foo == .none
```
The compiler will provide a warning along with a fix-it to
replace '.none' with 'Optional.none' or 'Foo.none' to resolve
the ambiguity.
* Key path expressions can now include references to tuple elements.
* Single-parameter functions accepting values of type `Any` are no
longer preferred over other functions.
```swift
func foo(_: Any) { print("Any") }
func foo<T>(_: T) { print("T") }
foo(0) // prints "Any" in Swift < 5.1, "T" in Swift 5.1
```
* [SE-0245][]:
`Array` and `ContiguousArray` now have `init(unsafeUninitializedCapacity:initializingWith:)`,
which provides access to the array's uninitialized storage.
## Swift 5.0
### 2019-03-25 (Xcode 10.2)
* [SE-0235][]:
The standard library now contains a `Result` type for manually propagating errors.
```swift
enum Result<Success, Failure: Error> {
case success(Success)
case failure(Failure)
}
```
This type serves a complementary role to that of throwing functions and initializers.
Use `Result` in situations where automatic error propagation or `try`-`catch`
blocks are undesirable, such as in asynchronous code or when accumulating the
results of successive error-producing operations.
* `Error` now conforms to itself. This allows for the use of `Error` itself as
the argument for a generic parameter constrained to `Error`.
* Swift 3 mode has been removed. Supported values for the `-swift-version`
flag are `4`, `4.2`, and `5`.
* [SE-0228][]:
String interpolation has been overhauled to improve its performance,
clarity, and efficiency.
Note that the old `_ExpressibleByStringInterpolation` protocol has been
removed; any code making use of this protocol will need to be updated
for the new design. An `#if compiler` block can be used to conditionalize
code between 4.2 and 5.0, for example:
```swift
#if compiler(<5.0)
extension MyType : _ExpressibleByStringInterpolation { ... }
#else
extension MyType : ExpressibleByStringInterpolation { ... }
#endif
```
* [SE-0213][]:
If `T` conforms to one of the `ExpressibleBy*` protocols and `literal` is a
literal expression, then `T(literal)` will construct a literal of type `T`
using the corresponding protocol, rather than calling a constructor member
of `T` with a value of the protocol's default literal type.
For example, expressions like `UInt64(0xffff_ffff_ffff_ffff)` are now valid,
where previously they would overflow the default integer literal type of `Int`.
* [SE-0230][]:
In Swift 5 mode, `try?` with an expression of Optional type will flatten the
resulting Optional, instead of returning an Optional of an Optional.
* [#48289][]:
In Swift 5 mode, `@autoclosure` parameters can no longer be forwarded to
`@autoclosure` arguments in another function call. Instead, you must explicitly
call the function value with `()`; the call itself is wrapped inside an
implicit closure, guaranteeing the same behavior as in Swift 4 mode.
Example:
```swift
func foo(_ fn: @autoclosure () -> Int) {}
func bar(_ fn: @autoclosure () -> Int) {
foo(fn) // Incorrect, `fn` can't be forwarded and has to be called
foo(fn()) // Ok
}
```
* [#50641][]:
Single-element labeled tuple expressions, for example `(label: 123)`, were
allowed in some contexts but often resulted in surprising, inconsistent
behavior that varied across compiler releases. They are now completely
disallowed.
Note that single-element labeled _types_, for example `var x: (label: Int)`,
have already been prohibited since Swift 3.
* [#43310][]:
In Swift 5 mode, a class method returning `Self` can no longer be overridden
with a method returning a non-final concrete class type. Such code is not
type safe and will need to be updated.
For example,
```swift
class Base {
class func factory() -> Self { ... }
}
class Derived : Base {
class override func factory() -> Derived { ... }
}
```
* In Swift 5 mode, the type of `self` in a convenience initializer of a non-final
class is now the dynamic `Self` type, and not the concrete class type.
* [#48153][]:
Protocols can now constrain their conforming types to those that subclasses a
given class. Two equivalent forms are supported:
```swift
protocol MyView : UIView { ... }
protocol MyView where Self : UIView { ... }
```
Note that Swift 4.2 accepted the second form, but it was not fully implemented
and could sometimes crash at compile time or run time.
* [#43248][]:
Extension binding now supports extensions of nested types which themselves are
defined inside extensions. Previously this could fail with some declaration orders,
producing spurious "undeclared type" errors.
* [#49687][]:
Exclusive memory access is now enforced at runtime by default in
optimized (`-O`/`-Osize`) builds. Programs that violate exclusivity will
trap at runtime with an "overlapping access" diagnostic
message. This can be disabled via a command line flag:
`-enforce-exclusivity=unchecked`, but doing so may result in undefined
behavior.
Runtime violations of exclusivity typically result from
simultaneous access of class properties, global variables (including
variables in top-level code), or variables captured by escaping
closures.
* [SE-0216][]:
The `@dynamicCallable` attribute enables nominal types to be "callable" via a
simple syntactic sugar. The primary use case is dynamic language
interoperability.
Toy example:
```swift
@dynamicCallable
struct ToyCallable {
func dynamicallyCall(withArguments: [Int]) {}
func dynamicallyCall(withKeywordArguments: KeyValuePairs<String, Int>) {}
}
let x = ToyCallable()
x(1, 2, 3) // desugars to `x.dynamicallyCall(withArguments: [1, 2, 3])`
x(label: 1, 2) // desugars to `x.dynamicallyCall(withKeywordArguments: ["label": 1, "": 2])`
```
* [#49799][]:
In Swift 5 mode, attempting to declare a static property with the same name as a
nested type is now always correctly rejected. Previously, it was possible to
perform such a redeclaration in an extension of a generic type.
For example:
```swift
struct Foo<T> {}
extension Foo {
struct i {}
// compiler error: Invalid redeclaration of 'i'
// (prior to Swift 5, this did not produce an error)
static var i: Int { return 0 }
}
```
* [#46831][]:
In Swift 5 mode, when casting an optional value to a generic placeholder type,
the compiler will be more conservative with the unwrapping of the value. The
result of such a cast now more closely matches the result you would get in a
non-generic context.
For example:
```swift
func forceCast<U>(_ value: Any?, to type: U.Type) -> U {
return value as! U
}
let value: Any? = 42
print(forceCast(value, to: Any.self))
// prints: Optional(42)
// (prior to Swift 5, this would print: 42)
print(value as! Any)
// prints: Optional(42)
```
* [SE-0227][]:
Key paths now support the `\.self` keypath, which is a `WritableKeyPath`
that refers to its entire input value:
```swift
let id = \Int.self
var x = 2
print(x[keyPath: id]) // prints 2
x[keyPath: id] = 3
print(x[keyPath: id]) // prints 3
```
* [SE-0214][]:
The `DictionaryLiteral` type has been renamed to `KeyValuePairs`.
A typealias preserves the old name for compatibility.
* [#45213][]
Default arguments are now printed in SourceKit-generated interfaces for Swift
modules, instead of just using a placeholder `default`.
* `unowned` and `unowned(unsafe)` variables now support Optional types.
* Designated initializers with variadic parameters are now correctly inherited
in subclasses.
* Extensions of concrete subclasses of generic classes can now contain
`@objc` members.
* Complex recursive type definitions involving classes and generics that would
previously cause deadlocks at run time are now fully supported.
* [#43036][]
In Swift 5 mode, when setting a property from within its own `didSet` or
`willSet` observer, the observer will now only avoid being recursively called
if the property is set on `self` (either implicitly or explicitly).
For example:
```swift
class Node {
var children = [Node]()
var depth: Int = 0 {
didSet {
if depth < 0 {
// Will not recursively call didSet, as setting depth on self (same
// with `self.depth = 0`).
depth = 0
}
// Will call didSet for each of the children, as we're not setting the
// property on self (prior to Swift 5, this did not trigger property
// observers to be called again).
for child in children {
child.depth = depth + 1
}
}
}
}
```
## Swift 4.2
### 2018-09-17 (Xcode 10.0)
* [SE-0202][]
The standard library now provides a unified set of randomization functionality.
Integer types, floating point types, and Bool all introduce a new static
method that creates a random value.
```swift
let diceRoll = Int.random(in: 1 ... 6)
let randomUnit = Double.random(in: 0 ..< 1)
let randomBool = Bool.random()
```
There are also additions to select a random element from a collection or
shuffle its contents.
```swift
let greetings = ["hey", "hello", "hi", "hola"]
let randomGreeting = greetings.randomElement()! // This returns an Optional
let newGreetings = greetings.shuffled() // ["hola", "hi", "hey", "hello"]
```
Core to the randomization functionality is a new `RandomNumberGenerator`
protocol. The standard library defines its own random number generator
called `SystemRandomNumberGenerator` which is backed by a secure and
thread-safe random number generator on each platform. All the randomization
functions have a `using:` parameter that take a `RandomNumberGenerator` that
users can pass in their own random number generator.
```swift
struct MersenneTwister: RandomNumberGenerator {
func next() -> UInt64 {
// implementation
}
}
var mt = MersenneTwister()
let diceRoll = Int.random(in: 1 ... 6, using: &mt)
```
* [SE-0194][]
The new CaseIterable protocol describes types which have a static
“allCases” property that is used to describe all of the cases of the
type. Swift will synthesize this “allCases” property for enums that
have no associated values. For example:
```swift
enum Suit: CaseIterable {
case heart
case club
case diamond
case spade
}
print(Suit.allCases) // prints [Suit.heart, Suit.club, Suit.diamond, Suit.spade]
```
* [SE-0185][]
Protocol conformances are now able to be synthesized in extensions in the same
file as the type definition, allowing automatic synthesis of conditional
conformances to `Hashable`, `Equatable` and `Codable` (both `Encodable` and
`Decodable`). For instance, if there is a generic wrapper type that can only
be `Equatable` when its wrapped type is also `Equatable`, the `==` method can
be automatically constructed by the compiler:
```swift
struct Generic<Param> {
var property: Param
}
extension Generic: Equatable where Param: Equatable {}
// Automatically synthesized inside the extension:
// static func ==(lhs: Generic, rhs: Generic) -> Bool {
// return lhs.property == rhs.property
// }
```
Code that wants to be as precise as possible should generally not
conditionally conform to `Codable` directly, but rather its two constituent
protocols `Encodable` and `Decodable`, or else one can only (for instance)
decode a `Generic<Param>` if `Param` is `Encodable` in addition to
`Decodable`, even though `Encodable` is likely not required:
```swift
// Unnecessarily restrictive:
extension Generic: Codable where Param: Codable {}
// More precise:
extension Generic: Encodable where Param: Encodable {}
extension Generic: Decodable where Param: Decodable {}
```
Finally, due to `Decodable` having an `init` requirement, it is not possible
to conform to `Decodable` in an extension of a non-final class: such a class
needs to have any `init`s from protocols be `required`, which means they need
to be in the class definition.
* [SE-0054][]
`ImplicitlyUnwrappedOptional<T>` is now an unavailable typealias of `Optional<T>`.
Declarations annotated with `!` have the type `Optional<T>`. If an
expression involving one of these values will not compile successfully with the
type `Optional<T>`, it is implicitly unwrapped, producing a value of type `T`.
In some cases this change will cause code that previously compiled to
need to be adjusted. Please see [this blog post](https://swift.org/blog/iuo/)
for more information.
* [SE-0206][]
The standard library now uses a high-quality, randomly seeded, universal
hash function, represented by the new public `Hasher` struct.
“Random seeding” varies the result of `hashValue` on each execution of a
Swift program, improving the reliability of the standard library's hashed
collections such as `Set` and `Dictionary`. In particular, random seeding
enables better protection against (accidental or deliberate) hash-flooding
attacks.
This change fulfills a long-standing prophecy in Hashable's documentation:
> Hash values are not guaranteed to be equal across different executions of
> your program. Do not save hash values to use during a future execution.
As a consequence of random seeding, the elements in `Set` and `Dictionary`
values may have a different order on each execution. This may expose some
bugs in existing code that accidentally relies on repeatable ordering.
Additionally, the `Hashable` protocol now includes an extra function
requirement, `hash(into:)`. The new requirement is designed to be much
easier to implement than the old `hashValue` property, and it generally
provides better hashing. To implement `hash(into:)`, simply feed the exact
same components of your type that you compare in `Equatable`'s `==`
implementation to the supplied `Hasher`:
```swift
struct Foo: Hashable {
var a: String?
var b: [Int]
var c: [String: Int]
static func ==(lhs: Foo, rhs: Foo) -> Bool {
return lhs.a == rhs.a && lhs.b == rhs.b && lhs.c == rhs.c
}
func hash(into hasher: inout Hasher) {
hasher.combine(a)
hasher.combine(b)
hasher.combine(c)
}
}
```
Automatic synthesis for `Hashable` ([SE-0185]) has been updated to generate
`hash(into:)` implementations. For example, the `==` and `hash(into:)`
implementations above are equivalent to the ones synthesized by the
compiler, and can be removed without changing the meaning of the code.
Synthesis has also been extended to support deriving `hashValue` from
`hash(into:)`, and vice versa. Therefore, code that only implements
`hashValue` continues to work in Swift 4.2. This new compiler functionality
works for all types that can implement `Hashable`, including classes.
Note that these changes don't affect Foundation's hashing interface. Classes
that subclass `NSObject` should override the `hash` property, like before.
In certain controlled environments, such as while running particular tests,
it may be helpful to selectively disable hash seed randomization, so that
hash values and the order of elements in `Set`/`Dictionary` values remain
consistent across executions. You can disable hash seed randomization by
defining the environment variable `SWIFT_DETERMINISTIC_HASHING` with the
value of `1`. The Swift runtime looks at this variable during process
startup and, if it is defined, replaces the random seed with a constant
value.
* [#42728][]
The behavior of `.description` and `.debugDescription` for floating-point
numbers has been changed. Previously these unconditionally printed a fixed
number of decimal digits (e.g. 15 and 17 for Double, respectively). They now
print exactly as many digits as are needed for the resulting string to
convert back to the original source value, and no more. For more details,
see the original bug report and the linked pull request.
* [SE-0193][]
Various function-like declarations can now be marked as `@inlinable`,
making their bodies available for optimizations from other modules.
Inlinable function bodies must only reference public declarations, unless
the referenced declaration is marked as `@usableFromInline`.
Note that the presence of the attribute itself does not force inlining or
any other optimization to be performed, nor does it have any effect on
optimizations performed within a single module.
* The C `long double` type is now imported as `Float80` on i386 and x86_64
macOS and Linux. The tgmath functions in the Darwin and glibc modules now
support `Float80` as well as `Float` and `Double`. Several tgmath
functions have been made generic over `[Binary]FloatingPoint` so that they
will automatically be available for any conforming type.
* [SE-0143][]
The standard library types `Optional`, `Array`, `ArraySlice`,
`ContiguousArray`, `Dictionary`, `Range`, and `ClosedRange` now conform to the
`Hashable` protocol when their element or bound types (as the case may be)
conform to `Hashable`. This makes synthesized `Hashable` implementations
available for types that include stored properties of these types.
* [SE-0196][]
Custom compile-time warnings or error messages can be emitted using the
`#warning(_:)` and `#error(_:)` directives.
```swift
#warning("this is incomplete")
#if MY_BUILD_CONFIG && MY_OTHER_BUILD_CONFIG
#error("MY_BUILD_CONFIG and MY_OTHER_BUILD_CONFIG cannot both be set")
#endif
```
* Public classes may now have internal `required` initializers. The rule for
`required` initializers is that they must be available everywhere the class
can be subclassed, but previously we said that `required` initializers on
public classes needed to be public themselves. (This limitation is a holdover
from before the introduction of the open/public distinction in Swift 3.)
* C macros containing casts are no longer imported to Swift if the type in the
cast is unavailable or deprecated, or produces some other diagnostic when
referenced. (These macros were already only imported under very limited
circumstances with very simple values, so this is unlikely to affect
real-world code.)
* [SE-0143][]
Runtime query of conditional conformances is now implemented. Therefore,
a dynamic cast such as `value as? P`, where the dynamic type of `value`
conditionally conforms to `P`, will succeed when the conditional
requirements are met.
## Swift 4.1
### 2018-03-29 (Xcode 9.3)
* [SE-0075][]
Compile-time testing for the existence and importability of modules is now
implemented as a build configuration test. The `canImport` test allows
the development of features that require a possibly-failing import
declaration across multiple platforms.
```swift
#if canImport(UIKit)
import UIKit
class MyView : UIView {}
#elseif canImport(AppKit)
import AppKit
class MyView : NSView {}
#else
class MyView : CustomView {}
#endif
```
* [SE-0189][]
If an initializer is declared in a different module from a struct, it must
use `self.init(…)` or `self = …` before returning or accessing `self`.
Failure to do so will produce a warning in Swift 4 and an error in Swift 5.
This is to keep a client app from accidentally depending on a library's
implementation details, and matches an existing restriction for classes,
where cross-module initializers must be convenience initializers.
This will most commonly affect code that extends a struct imported from C.
However, most imported C structs are given a zeroing no-argument initializer,
which can be called as `self.init()` before modifying specific properties.
Swift library authors who wish to continue allowing initialization on a
per-member basis should explicitly declare a public memberwise initializer
for clients in other modules to use.
* [SE-0166][] / [SE-0143][]
The standard library now defines the conformances of `Optional`,
`Array`, `Dictionary`, and `Set` to `Encodable` and `Decodable` as
conditional conformances, available only when their type parameters
conform to `Encodable` or `Decodable`, respectively.
* [SE-0188][]
Index types for most standard library collections now conform to `Hashable`.
These indices can now be used in key-path subscripts and hashed collections:
```swift
let s = "Hashable"
let p = \String.[s.startIndex]
s[keyPath: p] // "H"
```
* [SE-0143][] The standard library types `Optional`, `Array`, `ArraySlice`,
`ContiguousArray`, and `Dictionary` now conform to the `Equatable` protocol
when their element types conform to `Equatable`. This allows the `==` operator
to compose (e.g., one can compare two values of type `[Int : [Int?]?]` with
`==`), as well as use various algorithms defined for `Equatable` element
types, such as `index(of:)`.
* [SE-0157][] is implemented. Associated types can now declare "recursive"
constraints, which require that the associated type conform to the enclosing
protocol. The standard library protocols have been updated to make use of
recursive constraints. For example, the `SubSequence` associated type of
`Sequence` follows the enclosing protocol:
```swift
protocol Sequence {
associatedtype Element
associatedtype SubSequence: Sequence
where SubSequence.Element == Element,
SubSequence.SubSequence == SubSequence
// ...
}
protocol Collection: Sequence where Self.SubSequence: Collection {
// ...
}
```
As a result, a number of new constraints have been introduced into the
standard library protocols:
* Make the `Indices` associated type have the same traversal requirements as
its enclosing protocol, e.g., `Collection.Indices` conforms to
`Collection`, `BidirectionalCollection.Indices` conforms to
`BidirectionalCollection`, and so on
* Make `Numeric.Magnitude` conform to `Numeric`
* Use more efficient `SubSequence` types for lazy filter and map
* Eliminate the `*Indexable` protocols
* [SE-0161][] is fully implemented. KeyPaths now support subscript, optional
chaining, and optional force-unwrapping components.
* [SE-0186][]
It is no longer valid to use the ownership keywords `weak` and `unowned` for property declarations in protocols. These keywords are meaningless and misleading when used in a protocol as they don't have any effect.
In Swift 3 and 4 mode the following example will produce a warning with a fix-it to remove the keyword. In Swift 5 mode and above an error will be produced.
```swift
class A {}
protocol P {
weak var weakVar: A? { get set }
unowned var unownedVar: A { get set }
}
```
* [SE-0185][]
Structs and enums that declare a conformance to `Equatable`/`Hashable` now get an automatically synthesized implementation of `==`/`hashValue`. For structs, all stored properties must be `Equatable`/`Hashable`. For enums, all enum cases with associated values must be `Equatable`/`Hashable`.
```swift
public struct Point: Hashable {
public let x: Int
public let y: Int
public init(x: Int, y: Int) {
self.x = x
self.y = y
}
}
Point(3, 0) == Point(0, 3) // false
Point(3, 0) == Point(3, 0) // true
Point(3, 0).hashValue // -2942920663782199421
public enum Token: Hashable {
case comma
case identifier(String)
case number(Int)
}
Token.identifier("x") == .number(5) // false
Token.identifier("x") == .identifier("x") // true
Token.number(50).hashValue // -2002318238093721609
```
If you wish to provide your own implementation of `==`/`hashValue`, you still can; a custom implementation will replace the one synthesized by the compiler.
## Swift 4.0
### 2017-09-19 (Xcode 9.0)
* [SE-0165][] and [SE-0154][]
The standard library's `Dictionary` and `Set` types have some new features. You can now create a new dictionary from a sequence of keys and values, and merge keys and values into an existing dictionary.
```swift
let asciiTable = Dictionary(uniqueKeysWithValues: zip("abcdefghijklmnopqrstuvwxyz", 97...))
// ["w": 119, "n": 110, "u": 117, "v": 118, "x": 120, "q": 113, ...]
let vegetables = ["tomato", "carrot", "onion", "onion", "carrot", "onion"]
var vegetableCounts = Dictionary(zip(vegetables, repeatElement(1, count: Int.max)),
uniquingKeysWith: +)
vegetableCounts.merge([("tomato", 1)], uniquingKeysWith: +)
// ["tomato": 2, "carrot": 2, "onion": 3]
```
Filtering a set or a dictionary now results in the same type. You can also now transform just the values of a dictionary, keeping the same keys, using the `mapValues(_:)` method.
```swift
let vowels: Set<Character> = ["a", "e", "i", "o", "u"]
let asciiVowels = asciiTable.filter({ vowels.contains($0.key) })
asciiVowels["a"] // 97
asciiVowels["b"] // nil
let asciiHexTable = asciiTable.mapValues({ "0x" + String($0, radix: 16) })
// ["w": "0x77", "n": "0x6e", "u": "0x75", "v": "0x76", "x": "0x78", ...]
```
When using a key as a dictionary subscript, you can now supply a default value to be returned if the key is not present in the dictionary.
```swift
for veg in ["tomato", "cauliflower"] {
vegetableCounts[veg, default: 0] += 1
}
// ["tomato": 3, "carrot": 2, "onion": 3, "cauliflower": 1]
```
Use the new `init(grouping:by:)` initializer to convert an array or other sequence into a dictionary, grouped by a particular trait.
```swift
let buttons = // an array of button instances
let buttonsByStatus = Dictionary(grouping: buttons, by: { $0.isEnabled })
// How many enabled buttons?
print("Enabled:", buttonsByStatus[true]?.count ?? 0)
```
Additionally, dictionaries and sets now have a visible `capacity` property and a `reserveCapacity(_:)` method similar to arrays, and a dictionary's `keys` and `values` properties are represented by specialized collections.
* [SE-0161][] is partially implemented. Swift now natively supports key path
objects for properties. Similar to KVC key path strings in Cocoa, key path
objects allow a property to be referenced independently of accessing it
from a value:
```swift
struct Point {
var x, y: Double
}
let x = \Point.x
let y = \Point.y
let p = Point(x: 3, y: 4)
p[keyPath: x] // gives 3
p[keyPath: y] // gives 4
```
* Core Foundation types implicitly conform to Hashable (and Equatable), using
CFHash and CFEqual as the implementation. This change applies even to "Swift
3 mode", so if you were previously adding this conformance yourself, use
`#if swift(>=3.2)` to restrict the extension to Swift 3.1 and below.
([#44995][])
* [SE-0156][]
Protocol composition types can now contain one or more class type terms,
forming a class-constrained protocol composition.
For example:
```swift
protocol Paintable {
func paint()
}
class Canvas {
var origin: CGPoint
}
class Wall : Canvas, Paintable {
func paint() { ... }
}
func render(_: Canvas & Paintable) { ... }
render(Wall())
```
Note that class-constrained protocol compositions can be written and
used in both Swift 3 and Swift 4 mode.
Generated headers for Swift APIs will map class-constrained protocol
compositions to Objective-C protocol-qualified class types in both
Swift 3 and Swift 4 mode (for instance, `NSSomeClass & SomeProto &
OtherProto` in Swift becomes `NSSomeClass <SomeProto, OtherProto>`
in Objective-C).
Objective-C APIs which use protocol-qualified class types differ in
behavior when imported by a module compiled in Swift 3 mode and
Swift 4 mode. In Swift 3 mode, these APIs will continue to import as
protocol compositions without a class constraint
(eg, `SomeProto & OtherProto`).
In Swift 4 mode, protocol-qualified class types import as
class-constrained protocol compositions, for a more faithful mapping
of APIs from Objective-C to Swift.
Note that the current implementation of class-constrained protocol
compositions lacks three features outlined in the Swift evolution proposal:
- In the evolution proposal, a class-constrained is permitted to contain
two different classes as long as one is a superclass of the other.
The current implementation only allows multiple classes to appear in
the composition if they are identical.
- In the evolution proposal, associated type and class inheritance clauses
are generalized to allow class-constrained protocol compositions. The
current implementation does not allow this.
- In the evolution proposal, protocol inheritance clauses are allowed to
contain a class, placing a requirement that all conforming types are
a subclass of the given class. The current implementation does not
allow this.
These missing aspects of the proposal can be introduced in a future
release without breaking source compatibility with existing code.
* [SE-0142][]
Protocols and associated types can now contain `where` clauses that
provide additional restrictions on associated types. For example:
```swift
protocol StringRepresentable: RawRepresentable
where RawValue == String { }
protocol RawStringWrapper {
associatedtype Wrapped: RawRepresentable
where Wrapper.RawValue == String
}
```
* [SE-0160][]
In Swift 4 mode, a declaration is inferred to be `@objc` where it is required for semantic consistency of the programming model. Specifically, it is inferred when:
* The declaration is an override of an `@objc` declaration
* The declaration satisfies a requirement in an `@objc` protocol
* The declaration has one of the following attributes: `@IBAction`, `@IBOutlet`, `@IBInspectable`, `@GKInspectable`, or `@NSManaged`
Additionally, in Swift 4 mode, `dynamic` declarations that don't
have `@objc` inferred based on the rules above will need to be
explicitly marked `@objc`.
Swift 3 compatibility mode retains the more-permissive Swift 3
rules for inference of `@objc` within subclasses of
`NSObject`. However, the compiler will emit warnings about places
where the Objective-C entry points for these inference cases are
used, e.g., in a `#selector` or `#keyPath` expression, via
messaging through `AnyObject`, or direct uses in Objective-C code
within a mixed project. The warnings can be silenced by adding an
explicit `@objc`. Uses of these entrypoints that are not
statically visible to the compiler can be diagnosed at runtime by
setting the environment variable
`SWIFT_DEBUG_IMPLICIT_OBJC_ENTRYPOINT` to a value between 1 and 3
and testing the application. See the [migration discussion in
SE-0160](https://github.com/apple/swift-evolution/blob/main/proposals/0160-objc-inference.md#minimal-migration-workflow).
* [SE-0138](https://github.com/apple/swift-evolution/blob/main/proposals/0138-unsaferawbufferpointer.md#amendment-to-normalize-the-slice-type):
Slicing a raw buffer no longer results in the same raw buffer
type. Specifically, `Unsafe[Mutable]BufferPointer.SubSequence` now has type
`[Mutable]RandomAccessSlice<Unsafe[Mutable]RawBufferPointer>`. Therefore,
indexing into a raw buffer slice is no longer zero-based. This is required for
raw buffers to fully conform to generic `Collection`. Changing the slice type
resulted in the following behavioral changes:
Passing a region within buffer to another function that takes a buffer can no
longer be done via subscript:
Incorrect: `takesRawBuffer(buffer[i..<j])`
This now requires explicit initialization, using a `rebasing:` initializer,
which converts from a slice to a zero-based `Unsafe[Mutable]RawBufferPointer`:
Correct: `takesRawBuffer(UnsafeRawBufferPointer(rebasing: buffer[i..<j]))`
Subscript assignment directly from a buffer no longer compiles:
Incorrect: `buffer[n..<m] = smaller_buffer`
This now requires creation of a slice from the complete source buffer:
Correct: `buffer[n..<m] = smaller_buffer.suffix(from: 0)`
`UnsafeRawBufferPointer`'s slice type no longer has a nonmutating subscript
setter. So assigning into a mutable `let` buffer no longer compiles:
```swift
let slice = buffer[n..<m]
slice[i..<j] = buffer[k..<l]
```
The assigned buffer slice now needs to be a `var`.
```swift
var slice = buffer[n..<m]
slice[i..<j] = buffer[k..<l]
```
* [#44138][]:
Covariant method overrides are now fully supported, fixing many crashes
and compile-time assertions when defining or calling such methods.
Examples:
```swift
class Bed {}
class Nook : Bed {}
class Cat<T> {
func eat(snack: T) {}
func play(game: String) {}
func sleep(where: Nook) {}
}
class Dog : Cat<(Int, Int)> {
// 'T' becomes concrete
override func eat(snack: (Int, Int)) {}
// 'game' becomes optional
override func play(game: String?) {}
// 'where' becomes a superclass
override func sleep(where: Bed) {}
}
```
* [SE-0148][]:
Subscript declarations can now be defined to have generic parameter lists.
Example:
```swift
extension JSON {
subscript<T>(key: String) -> T?
where T : JSONConvertible {
// ...
}
}
```
* [SE-0110][]:
In Swift 4 mode, Swift's type system properly distinguishes between functions that
take one tuple argument, and functions that take multiple arguments.
* More types of C macros which define integer constants are supported by the
importer. Specifically the `+, -, *, /, ^, >>, ==, <, <=, >, >=` operators
are now recognized, and the previously-supported `<<, &&, ||, &, |`
operators always look through importable macros on each side of the operator.
Logical AND and OR macros (`&&` and `||`) are now imported as Boolean
constants, rather than integers of value 0 or 1.
```c
#define HIGHER (5 + 5)
#define THE_EDGE (INT64_MAX - 1)
#define FORTY_TWO (6 * 9)
#define SPLIT (THE_EDGE / FORTY_TWO)
#define HALF_AND_HALF (UINT64_MAX ^ UINT32_MAX)
#define SMALL (BITWIDTH == 32)
#define TINY (BITWIDTH <= 16)
#define LIMITED (SMALL || TINY) // now imported as Bool.
```
## Swift 3.1
### 2017-03-27 (Xcode 8.3)
* [SE-0080][]:
Adds a new family of conversion initializers to all numeric types that
either complete successfully without loss of information or return nil.
* Swift will now warn when an `NSObject` subclass attempts to override the
class `initialize` method. Swift doesn't guarantee that references to class
names trigger Objective-C class realization if they have no other
side effects, leading to bugs when Swift code attempted to override
`initialize`.
* [#45001][]
C functions that "return twice" are no longer imported into Swift. Instead,
they are explicitly made unavailable, so attempting to reference them will
result in a compilation error.
Examples of functions that "return twice" include `vfork` and `setjmp`.
These functions change the control flow of a program in ways that Swift
has never supported. For example, definitive initialization of variables,
a core Swift language feature, could not be guaranteed when these functions
were used.
Swift code that references these functions will no longer compile. Although
this could be considered a source-breaking change, it's important to note that
any use of these functions would have most likely crashed at runtime. Now,
the compiler will prevent them from being used in the first place.
* Indirect fields from C structures and unions are now always imported, while
they previously weren't imported if they belonged to a union. This is done by
naming anonymous fields. For example:
```c
typedef struct foo_t {
union {
int a;
double b;
};
} foo_t;
```
Get imported as:
```swift
struct foo_t {
struct __Unnamed_union___Anonymous_field0 {
var a : Int { get set }
var b : Double { get set }
}
var __Anonymous_field0 : foo_t.__Unnamed_union___Anonymous_field0
// a and b are computed properties accessing the content of __Anonymous_field0
var a : Int { get set }
var b : Double { get set }
}
```
Since new symbols are exposed from imported structure/unions, this may conflict
with existing code that extended C types in order to provide their own accessors
to the indirect fields.
* The `withoutActuallyEscaping` function from [SE-0103][] has been implemented.
To pass off a non-escaping closure to an API that formally takes an
`@escaping` closure, but which is used in a way that will not in fact
escape it in practice, use `withoutActuallyEscaping` to get an escapable
copy of the closure and delimit its expected lifetime. For example:
```swift
func doSimultaneously(_ f: () -> (), and g: () -> (), on q: DispatchQueue) {
// DispatchQueue.async normally has to be able to escape its closure
// since it may be called at any point after the operation is queued.
// By using a barrier, we ensure it does not in practice escape.
withoutActuallyEscaping(f) { escapableF in
withoutActuallyEscaping(g) { escapableG in
q.async(escapableF)
q.async(escapableG)
q.sync(flags: .barrier) {}
}
}
// `escapableF` and `escapableG` must be dequeued by the point
// `withoutActuallyEscaping` returns.
}
```
The old workaround of using `unsafeBitCast` to cast to an `@escaping` type
is not guaranteed to work in future versions of Swift, and will
now raise a warning.
* [#44055][]
Nested types may now appear inside generic types, and nested types may have their own generic parameters:
```swift
struct OuterNonGeneric {
struct InnerGeneric<T> {}
}
struct OuterGeneric<T> {
struct InnerNonGeneric {}
struct InnerGeneric<T> {}
}
extension OuterNonGeneric.InnerGeneric {}
extension OuterGeneric.InnerNonGeneric {}
extension OuterGeneric.InnerGeneric {}
```
* [#43621][]:
Constrained extensions allow same-type constraints between generic parameters and concrete types. This enables you to create extensions, for example, on `Array` with `Int` elements:
```swift
extension Array where Element == Int { }
```
* [SE-0045][]:
The `Sequence` protocol adds two new members `prefix(while:)` and
`drop(while:)` for common utility. `prefix(while:)` requests the longest subsequence
satisfying a predicate. `drop(while:)` requests the remaining
subsequence after dropping the longest subsequence satisfying a
predicate.
## Swift 3.0
### 2016-09-13 (Xcode 8.0)
* [SE-0101][]:
The functions `sizeof()`, `strideof()`, and `alignof()` have been removed.
Memory layout properties for a type `T` are now spelled
`MemoryLayout<T>.size`, `MemoryLayout<T>.stride`, and
`MemoryLayout<T>.alignment`, respectively.
* [SE-0136][]:
The functions `sizeofValue()`, `strideofValue()`, and `alignofValue()` have been renamed to `MemoryLayout.size(ofValue:)`, `MemoryLayout.stride(ofValue:)`,
and `MemoryLayout.alignment(ofValue:)`.
* [SE-0125][]:
The functions `isUniquelyReferenced()` and `isUniquelyReferencedNonObjC()`
have been removed. Call the function `isKnownUniquelyReferenced()` instead.
Classes using `isUniquelyReferenced()` needed to inherit from `NonObjectiveCBase`. The `NonObjectiveCBase` class has been removed.
The method `ManagedBufferPointer.holdsUniqueReference` has been renamed to
`ManagedBufferPointer.isUniqueReference`.
```swift
// old
class SwiftKlazz : NonObjectiveCBase {}
expectTrue(isUniquelyReferenced(SwiftKlazz()))
var managedPtr : ManagedBufferPointer = ...
if !managedPtr.holdsUniqueReference() {
print("not unique")
}
// new
class SwiftKlazz {}
expectTrue(isKnownUniquelyReferenced(SwiftKlazz()))
var managedPtr : ManagedBufferPointer = ...
if !managedPtr.isUniqueReference() {
print("not unique")
}
```
* [SE-0124][]:
Initializers on `Int` and `UInt` that accept an `ObjectIdentifier` must now use an explicit `bitPattern` label.
```swift
let x: ObjectIdentifier = ...
// old
let u = UInt(x)
let i = Int(x)
// new
let u = UInt(bitPattern: x)
let i = Int(bitPattern: x)
```
* [SE-0120][]:
The collection methods `partition()` and `partition(isOrderedBefore:)` have been removed from Swift. They are replaced by the method `partition(by:)` which takes a unary predicate.
Calls to the `partition()` method can be replaced by the following code.
```swift
// old
let p = c.partition()
// new
let p = c.first.flatMap({ first in
c.partition(by: { $0 >= first })
}) ?? c.startIndex
```
* [SE-0103][]:
Closure parameters are now non-escaping by default and do not require `@noescape` annotation. Use `@escaping` to indicate that a closure parameter can escape. `@autoclosure(escaping)` is now spelled `@autoclosure @escaping`. `@noescape` and `@autoclosure(escaping)` are deprecated.
* [SE-0115][]:
To clarify their roles, `*LiteralConvertible` protocols have been renamed to `ExpressibleBy*Literal`. The protocol requirements are unchanged.
* [SE-0107][]:
An `Unsafe[Mutable]RawPointer` type has been introduced. It replaces
`Unsafe[Mutable]Pointer<Void>`. Conversion from `UnsafePointer<T>`
to `UnsafePointer<U>` has been disallowed. `Unsafe[Mutable]RawPointer`
provides an API for untyped memory access, and an API for binding memory
to a type. Binding memory allows for safe conversion between pointer types.
For detailed instructions on how to migrate your code to the new API refer to the [UnsafeRawPointer migration guide](https://swift.org/migration-guide/se-0107-migrate.html). See also: See `bindMemory(to:capacity:)`, `assumingMemoryBound(to:)`, and
`withMemoryRebound(to:capacity:)`.
* [SE-0096][]:
The `dynamicType` keyword has been removed from Swift. It's replaced by a new primitive function `type(of:)`. Existing code
using the `.dynamicType` member to retrieve the type of an expression should migrate to this new primitive. Code using `.dynamicType` in conjunction with `sizeof` should migrate to the `MemoryLayout` structure introduced by [SE-0101][].
* [SE-0113][]:
The following two methods were added to `FloatingPoint`:
```swift
func rounded(_ rule: FloatingPointRoundingRule) -> Self
mutating func round( _ rule: FloatingPointRoundingRule)
```
These methods bind the IEEE 754 roundToIntegral operations. They provide the functionality of the C / C++ `round()`, `ceil()`, `floor()`, and `trunc()` functions along with other rounding operations.
Following onto [SE-0113][] and [SE-0067][], the following `Darwin.C` and `glibc` module mathematical operations now operate on any type conforming to `FloatingPoint`: `fabs`, `sqrt`, `fma`,
`remainder`, `fmod`, `ceil`, `floor`, `round`, and `trunc`.
See also: the changes associated with [SE-0067][].
* [SE-0067][]:
The `FloatingPoint` protocol has been expanded to include most IEEE 754
required operations. A number of useful properties have been added to the
protocol, representing quantities like the largest finite value or
the smallest positive normal value (these correspond to the macros such as
FLT_MAX defined in C).
While almost all of the changes are additive, four changes impact existing code:
- The `%` operator is no longer available for `FloatingPoint` types. It
was difficult to use correctly and its semantics did not match
those of the corresponding integer operation. This made it something of an attractive nuisance. The new method `formTruncatingRemainder(dividingBy:)`
provides the old semantics if they are needed.
- The static property `.NaN` has been renamed `.nan`.
- The static property `.quietNaN` was redundant and has been removed. Use
`.nan` instead.
- The predicate `isSignaling` has been renamed `isSignalingNaN`.
See also: the changes associated with [SE-0113][].
* [SE-0111][]:
Argument labels have been removed from Swift function types. They are now
part of the name of a function, subscript, or initializer. Calls to a function or initializer, and subscript uses, still require argument labels as they always have:
```swift
func doSomething(x: Int, y: Int) { }
doSomething(x: 0, y: 0) // argument labels are required
```
Unapplied references to functions or initializers no longer carry argument labels. For example:
```swift
let f = doSomething(x:y:) // inferred type is now (Int, Int) -> Void
```
Explicitly-written function types can no longer carry argument labels. You can still provide parameter names for documentation purposes using the '_' in the argument label position:
```swift
typealias CompletionHandler =
(token: Token, error: Error?) -> Void // error: function types cannot have argument labels
typealias CompletionHandler =
(_ token: Token, _ error: Error?) -> Void // okay: names are for documentation purposes
```
* [SE-0025][]:
The access level formerly known as `private` is now called `fileprivate`. A Swift 3 declaration marked `private` can no longer be accessed outside its lexical scope (essentially its enclosing curly braces `{}`). A `private` declaration at the top level of a file can be accessed anywhere within the same file, as it could in Swift 2.
* [SE-0131][]:
The standard library introduces the `AnyHashable` type for use in hashed heterogeneous collections. Untyped `NSDictionary` and `NSSet` Objective-C APIs now import as `[AnyHashable: Any]` and `Set<AnyHashable>`.
* [SE-0102][]:
Swift removes the `@noreturn` attribute on function declarations and replaces the attribute with an empty `Never` type:
```swift
@noreturn func fatalError(msg: String) { ... } // old
func fatalError(msg: String) -> Never { ... } // new
func performOperation<T>(continuation: @noreturn T -> ()) { ... } // old
func performOperation<T>(continuation: T -> Never) { ... } // new
```
* [SE-0116][]:
Swift now imports Objective-C `id` APIs as `Any`. In Swift 2, `id` imported as `AnyObject`. Swift also imports untyped `NSArray` and `NSDictionary` as `[Any]` and `[AnyHashable: Any]`, respectively.
* [SE-0072][]:
Swift eliminates implicit bridging conversions. Use `as` to force the conversion from a Swift value type to its corresponding object. For example, use `string as NSString`. Use `as AnyObject` to convert a Swift value to its boxed `id` representation.
* Collection subtype conversions and dynamic casts now work with protocol types:
```swift
protocol P {}; extension Int: P {}
var x: [Int] = [1, 2, 3]
var p: [P] = x
var x2 = p as! [Int]
```
* [#44739][]:
The `hasPrefix` and `hasSuffix` functions now consider the empty string to be a prefix and suffix of all strings.
* [SE-0128][]:
Some non-failable UnicodeScalar initializers now return an Optional. When a UnicodeScalar cannot be constructed, these initializers return nil.
```swift
// Old
var string = ""
let codepoint: UInt32 = 55357 // Invalid
let ucode = UnicodeScalar(codepoint) // Program crashes here.
string.append(ucode)
```
The updated initializers allow users to write code that safely works around invalid codepoints, like this example:
```swift
// New
var string = ""
let codepoint: UInt32 = 55357 // Invalid
if let ucode = UnicodeScalar(codepoint) {
string.append(ucode)
} else {
// do something else
}
```
* [SE-0095][]:
Swift removes the `protocol<...>` composition construct and introduces an infix type operator `&` in its place.
```swift
let a: Foo & Bar
let b = value as? A & B & C
func foo<T : Foo & Bar>(x: T) { ... }
func bar(x: Foo & Bar) { ... }
typealias G = GenericStruct<Foo & Bar>
```
Swift previously defined the empty protocol composition (the `Any` type) as `protocol<>`. This definition has been removed from the standard library. The `Any` keyword behavior remains unchanged.
* [SE-0091][]:
Swift permits you to define operators within types or their extensions. For example:
```swift
struct Foo: Equatable {
let value: Int
static func ==(lhs: Foo, rhs: Foo) -> Bool {
return lhs.value == rhs.value
}
}
```
You must declare these operators as `static` (or, within a class, `class
final`) and they must use the same signature as their global counterparts. As part of this change, protocol-declared operator requirements must be declared `static` explicitly:
```swift
protocol Equatable {
static func ==(lhs: Self, rhs: Self) -> Bool
}
```
Note: The type checker performance optimization described by [SE-0091][]
is not yet implemented.
* [SE-0099][]:
Condition clauses in `if`, `guard`, and `while` statements now use a more
regular syntax. Each pattern or optional binding must be prefixed with `case`
or `let` respectively, and all conditions are separated by `,` instead of
`where`.
```swift
// before
if let a = a, b = b where a == b { }
// after
if let a = a, let b = b, a == b { }
```
* [SE-0112][]:
The `NSError` type now bridges to the Swift `Error` protocol type (formerly `ErrorProtocol` in Swift 3, `ErrorType` in Swift 2)
in Objective-C APIs. `NSError` now bridges like other Objective-C types, e.g., `NSString` bridges to `String`.
For
example, the `UIApplicationDelegate` method
`applicate(_:didFailToRegisterForRemoteNotificationsWithError:)`
previously accepted an `NSError` argument:
```swift
optional func application(_ application: UIApplication,
didFailToRegisterForRemoteNotificationsWithError error: NSError)
```
Now it accepts an `Error` argument:
```swift
optional func application(_ application: UIApplication,
didFailToRegisterForRemoteNotificationsWithError error: Error)
```
Error types imported from Cocoa[Touch] maintain all of
the information in the corresponding `NSError`. You no longer `catch let as NSError` to extract, for example, the user-info
dictionary.
Specific error types now contain typed accessors for
their common user-info keys. For example:
```swift
catch let error as CocoaError where error.code == .fileReadNoSuchFileError {
print("No such file: \(error.url)")
}
```
Swift-defined error types can now provide localized error
descriptions by adopting the new `LocalizedError` protocol, e.g.,
```swift
extension HomeworkError : LocalizedError {
var errorDescription: String? {
switch self {
case .forgotten: return NSLocalizedString("I forgot it")
case .lost: return NSLocalizedString("I lost it")
case .dogAteIt: return NSLocalizedString("The dog ate it")
}
}
}
```
New `RecoverableError` and `CustomNSError` protocols
allow additional control over the handling of the error.
* [SE-0060][]:
Function parameters with defaulted arguments are specified in
declaration order. Call sites must now supply those arguments using that order:
```swift
func requiredArguments(a: Int, b: Int, c: Int) {}
func defaultArguments(a: Int = 0, b: Int = 0, c: Int = 0) {}
requiredArguments(a: 0, b: 1, c: 2)
requiredArguments(b: 0, a: 1, c: 2) // error
defaultArguments(a: 0, b: 1, c: 2)
defaultArguments(b: 0, a: 1, c: 2) // error
```
Labeled parameters with default arguments may still be elided, so long as included arguments follow declaration order:
```swift
defaultArguments(a: 0) // ok
defaultArguments(b: 1) // ok
defaultArguments(c: 2) // ok
defaultArguments(a: 1, c: 2) // ok
defaultArguments(b: 1, c: 2) // ok
defaultArguments(c: 1, b: 2) // error
```
* Traps from force-unwrapping nil `Optional`s now show the source location of the force unwrap operator.
* [SE-0093][]:
Slice types add a `base` property that allows public readonly access to their base collections.
* Nested generic functions may now capture bindings from the environment, for example:
```swift
func outer<T>(t: T) -> T {
func inner<U>(u: U) -> (T, U) {
return (t, u)
}
return inner(u: (t, t)).0
}
```
* Initializers are now inherited even if the base class or derived class is generic:
```swift
class Base<T> {
let t: T
init(t: T) {
self.t = t
}
}
class Derived<T> : Base<T> {
// init(t: T) is now synthesized to call super.init(t: t)
}
```
* [SE-0081][]:
"Move `where` clause to end of declaration" is now implemented. This change allows you to write `where` clauses after a declaration signature and before its body. For example, before this change was implemented, you'd write:
```swift
func anyCommonElements<T : SequenceType, U : SequenceType
where T.Generator.Element: Equatable, T.Generator.Element == U.Generator.Element>
(lhs: T, _ rhs: U) -> Bool
{
...
}
```
Now the `where` clause appears just before the body:
```swift
func anyCommonElements<T : SequenceType, U : SequenceType>(lhs: T, _ rhs: U) -> Bool
where T.Generator.Element: Equatable, T.Generator.Element == U.Generator.Element
{
...
}
```
The old form is currently accepted for compatibility. It will eventually be rejected.
* [SE-0071][]:
"Allow (most) keywords in member references" is implemented. This change allows the use of members after a dot without backticks, e.g. "foo.default", even though `default` is a keyword for `switch` statements.
* [SE-0057][]:
Objective-C lightweight generic classes are now imported as generic types
in Swift. Some limitations apply because Objective-C generics are not represented at runtime:
- When an ObjC generic class is used in a checked `as?`, `as!`, or `is` cast, the generic parameters are not checked at runtime. The cast succeeds if the operand is an instance of the ObjC class, regardless of parameters.
```swift
let x = NSFoo<NSNumber>(value: NSNumber(integer: 0))
let y: AnyObject = x
let z = y as! NSFoo<NSString> // Succeeds
```
- Swift subclasses can only inherit from an ObjC generic class when its generic parameters are fully specified.
```swift
// Error: Can't inherit ObjC generic class with unbound parameter T
class SwiftFoo1<T>: NSFoo<T> { }
// OK: Can inherit ObjC generic class with specific parameters
class SwiftFoo2<T>: NSFoo<NSString> { }
```
- Swift can extend ObjC generic classes but the extensions cannot be constrained, and definitions inside the extension don't have access to the class's generic parameters.
```swift
extension NSFoo {
// Error: Can't access generic param T
func foo() -> T {
return T()
}
}
// Error: extension can't be constrained
extension NSFoo where T: NSString {
}
```
- Foundation container classes `NS[Mutable]Array`, `NS[Mutable]Set`, and `NS[Mutable]Dictionary` are still imported as nongeneric classes for the time being.
* [SE-0036][]:
Enum elements can no longer be accessed as instance members in instance methods.
* As part of the changes for [SE-0055][] (see below), the *pointee* types of imported pointers (e.g. the `id` in `id *`) are no longer assumed to always be `_Nullable` even if annotated otherwise.
* An implicit or explicit annotation of `_Null_unspecified` on a pointee type still imports as `Optional`.
* [SE-0055][]:
The types `UnsafePointer`, `UnsafeMutablePointer`,
`AutoreleasingUnsafeMutablePointer`, `OpaquePointer`, `Selector`, and `Zone` (formerly `NSZone`) now represent non-nullable pointers, i.e. pointers that are never `nil`. A nullable pointer is now represented using `Optional`, e.g. `UnsafePointer<Int>?` For types imported from C, non-object pointers (such as `int *`) now have their nullability taken into account.
One possible area of difficulty is passing a nullable pointer to a function that uses C variadics. Swift will not permit this directly. As a workaround, use the following idiom to pass a pointer-sized integer value instead:
```swift
unsafeBitCast(nullablePointer, to: Int.self)
```
* [SE-0046][]:
Function parameters adopt consistent labeling across all function parameters. With this update, first parameter declarations match the existing behavior of the second and later parameters. This change makes the language simpler.
Functions that were written and called as follows:
```swift
func foo(x: Int, y: Int) {}
foo(1, y: 2)
func bar(a a: Int, b: Int) {}
bar(a: 3, b: 4)
```
Are now written as follows with the same behavior at call sites:
```swift
func foo(_ x: Int, y: Int) {}
foo(1, y: 2)
func bar(a: Int, b: Int) {}
bar(a: 3, b: 4)
```
* [SE-0037][]:
Comments are now treated as whitespace when determining whether an operator is prefix, postfix, or binary. For example, these now work:
```swift
if /*comment*/!foo { ... }
1 +/*comment*/2
```
Comments can no longer appear between a unary operator and its argument.
```swift
foo/* comment */! // no longer works
```
Parse errors resulting from this change can be resolved by moving the comment outside the expression.
* [SE-0031][]:
The location of the inout attribute moves to after the colon (`:`) and before the parameter type.
```swift
func foo(inout x: Int) {
}
```
will now be written as:
```swift
func foo(x: inout Int) {
}
```
* [SE-0053][]:
`let` is no longer accepted as a parameter attribute for functions. The compiler provides a fixit to remove it from the function declaration.
* [SE-0003][]:
`var` is no longer accepted as a parameter attribute for functions. The compiler provides a fixit to create a shadow copy in the function body.
```swift
func foo(var x: Int) {
}
```
will now be written as:
```swift
func foo(x: Int) {
var x = x
}
```
* The "none" members of imported NS_OPTIONS option sets are marked as unavailable when they are imported. Use `[]` to make an empty option set, instead of a None member.
* [SE-0043][]
Adds the ability to declare variables in multiple patterns in cases.
* [SE-0005][]
Allows the Clang importer to import ObjC symbols using substantially different Swift-like naming paradigms:
* These updates generalize the use of `swift_name`, allowing arbitrary C and Objective-C entity import names. This adds fine-grained control over the import process.
* Redundant type names are pruned (`documentForURL(_: NSURL)` becomes `document(for: URL)`). Selectors are guaranteed to never be empty, to be transformed into Swift keywords, to be vacuously named (like `get`, `set`, `with`, `for`). Additional pruning rules preserve readability and sense.
* Common arguments are sensibly defaulted where the Objective-C API strongly hints at the need for a default argument. (For example, nullable trailing closures default to `nil`, option sets to `[]`, and `NSDictionary` parameters to `[:]`.) First argument labels are added for defaulted arguments.
* Boolean properties are prepended with `is`, and read as assertions on the receiver.
* Non-type values, including enumerators, are lowercased.
* Classes that implement `compare(_:) -> NSComparisonResult` automatically import as `Comparable`.
* [SE-0040][]
Attributes change from using `=` in parameters lists
to using `:`, aligning with function call syntax.
```swift
// before
@available(*, unavailable, renamed="MyRenamedProtocol")
// after
@available(*, unavailable, renamed: "MyRenamedProtocol")
```
* [SE-0048][]
Generic typealiases are now supported. For example:
```swift
typealias StringDictionary<T> = Dictionary<String, T>
typealias IntFunction<T> = (T) -> Int
typealias MatchingTriple<T> = (T, T, T)
typealias BackwardTriple<T1, T2, T3> = (T3, T2, T1)
```
etc.
* [SE-0049][]
The `@noescape` attribute is extended to be a more general type attribute. You can now declare values of `@noescape` function type, e.g. in manually curried function signatures. You can now also declare local variables of `@noescape` type, and use `@noescape` in `typealiases`. For example, this is now valid code:
```swift
func apply<T, U>(@noescape f: T -> U,
@noescape g: (@noescape T -> U) -> U) -> U {
return g(f)
}
```
* [SE-0034][]
The `#line` directive (which resets the logical
source location for diagnostics and debug information) is renamed to `#sourceLocation`.
* [SE-0002][]
Curried function syntax (with successive parenthesized groups of arguments) is removed, and now produces a compile-time error. Use chained functional return types instead.
```swift
// Before
public func project(function f: FunctionType)(p0: CGPoint, p1: CGPoint)(x: CGFloat) -> CGPoint
// After
public func project(function f: FunctionType) -> (p0: CGPoint, p1: CGPoint) -> (x: CGFloat) -> CGPoint
```
* Generic signatures can now contain superclass requirements with generic parameter types, for example:
```swift
func f<Food : Chunks<Meat>, Meat : Molerat>(f: Food, m: Meat) {}
```
* Section markers are created in ELF binaries through special objects during link time. These objects allow for the deletion of `swift.ld` and the use of non-BFD linkers. A new argument to swiftc is provided to select the linker used, and the gold linker is set as the default for arm-based platforms.
* Catch blocks in `rethrows` functions may now `throw` errors. For example:
```swift
func process(f: () throws -> Int) rethrows -> Int {
do {
return try f()
} catch is SomeError {
throw OtherError()
}
}
```
* Throwing closure arguments of a rethrowing function may now be optional. For example:
```swift
func executeClosureIfNotNil(closure: (() throws -> Void)?) rethrows {
try closure?()
}
```
* [SE-0064][]:
The Objective-C selectors for the getter or setter of a property can now be referenced with `#selector`. For example:
```swift
let sel1 = #selector(getter: UIView.backgroundColor) // sel1 has type Selector
let sel2 = #selector(setter: UIView.backgroundColor) // sel2 has type Selector
```
* [SE-0062][]:
A key-path can now be formed with `#keyPath`. For example:
```swift
person.valueForKeyPath(#keyPath(Person.bestFriend.lastName))
```
## Swift 2.2
### 2016-03-21 (Xcode 7.3)
* [SE-0011][]:
Associated types in protocols can now be specified with a new `associatedtype`
declaration, to replace the use of `typealias`:
```swift
protocol P {
associatedtype Ty
}
```
The `typealias` keyword is still allowed (but deprecated and produces a warning)
in Swift 2.2. This warning will become an error in Swift 3.0.
* [SE-0002][]:
Curried function syntax has been deprecated, and is slated to be removed in
Swift 3.0.
* [SE-0004][]:
The `++` and `--` operators have been deprecated, and are slated to be removed in
Swift 3.0. As a replacement, please use `x += 1` on integer or floating point
types, and `x = x.successor()` on Index types.
* [SE-0029][]:
The implicit tuple splat behavior in function application has been deprecated
and will be removed in Swift 3.0. For example, this code:
```swift
func foo(a : Int, b : Int) { ... }
let x = (1, b: 2)
foo(x) // Warning, deprecated.
```
should move to being written as:
```swift
foo(x.0, x.b)
```
* [SE-0028][]:
New `#file`, `#line`, `#column`, and `#function` expressions have been introduced to
replace the existing `__FILE__`, `__LINE__`, `__COLUMN__`, and `__FUNCTION__` symbols.
The `__FILE__`-style symbols have been deprecated, and will be removed in
Swift 3.0.
* The operator identifier lexer grammar has been revised to simplify the rules
for operators that start with a dot ("."). The new rule is that an operator
that starts with a dot may contain other dots in it, but operators that start
with some other character may not contain dots. For example:
```swift
x....foo --> "x" "...." "foo"
x&%^.foo --> "x" "&%^" ".foo"
```
This eliminates a special case for the `..<` operator, folding it into a simple
and consistent rule.
* [SE-0007][]:
The "C-style for loop", which is spelled `for init; comparison; increment {}`
has been deprecated and is slated for removal in Swift 3.0.
* Three new doc comment fields, namely `- keyword:`, `- recommended:`
and `- recommendedover:`, allow Swift users to cooperate with code
completion engine to deliver more effective code completion results.
The `- keyword:` field specifies concepts that are not fully manifested in
declaration names. `- recommended:` indicates other declarations are preferred
to the one decorated; to the contrary, `- recommendedover:` indicates
the decorated declaration is preferred to those declarations whose names
are specified.
* Designated class initializers declared as failable or throwing may now
return `nil` or throw an error, respectively, before the object has been
fully initialized. For example:
```swift
class Widget : Gadget {
let complexity: Int
init(complexity: Int, elegance: Int) throws {
if complexity > 3 { throw WidgetError.TooComplex }
self.complexity = complexity
try super.init(elegance: elegance)
}
}
```
* All slice types now have `removeFirst()` and `removeLast()` methods.
* `ArraySlice.removeFirst()` now preserves element indices.
* Global `anyGenerator()` functions have been changed into initializers on
`AnyGenerator`, making the API more intuitive and idiomatic. They have been
deprecated in Swift 2.2, and will be removed in Swift 3.0.
* Closures appearing inside generic types and generic methods can now be
converted to C function pointers, as long as no generic type parameters
are referenced in the closure's argument list or body. A conversion of
a closure that references generic type parameters now produces a
diagnostic instead of crashing.
**(rdar://problem/22204968)**
* Anonymously-typed members of C structs and unions can now be accessed
from Swift. For example, given the following struct 'Pie', the 'crust'
and 'filling' members are now imported:
```swift
struct Pie {
struct { bool crispy; } crust;
union { int fruit; } filling;
}
```
Since Swift does not support anonymous structs, these fields are
imported as properties named `crust` and `filling` having nested types
named `Pie.__Unnamed_crust` and `Pie.__Unnamed_filling`.
**(rdar://problem/21683348)**
* [SE-0001][]:
Argument labels and parameter names can now be any keyword except
`var`, `let`, or `inout`. For example:
```swift
NSURLProtectionSpace(host: "somedomain.com", port: 443, protocol: "https",
realm: "Some Domain", authenticationMethod: "Basic")
```
would previously have required `protocol` to be surrounded in
back-ticks.
* [SE-0015][]:
Tuples (up to arity 6) whose elements are all `Comparable` or `Equatable` now
implement the full set of comparison/equality operators. The comparison
operators are defined in terms of
[lexicographical order](https://en.wikipedia.org/wiki/Lexicographical_order).
* The `@objc(SomeName)` attribute is now supported on enums and enum cases to
rename the generated Objective-C declaration.
**(rdar://problem/21930334)**
* [SE-0021][]:
When referencing a function or initializer, one can provide the
complete name, including argument labels. For example:
```swift
let fn1 = someView.insertSubview(_:at:)
let fn2 = someView.insertSubview(_:aboveSubview:)
let buttonFactory = UIButton.init(type:)
```
* [SE-0020][]:
There is a new build configuration function, `#if swift(>=x.y)`, which
tests if the current Swift language version is at least `x.y`. This
allows you to conditionally compile code for multiple language
versions in the same file, even with different syntax, by deactivating
parsing in inactive code blocks. For example:
```swift
#if swift(>=2.2)
// Only this code will be parsed in Swift 3.0
func foo(x: Int) -> (y: Int) -> () {}
#else
// This code is ignored entirely.
func foo(x: Int)(y: Int) {}
#endif
```
* [SE-0022][]:
The Objective-C selector of a Swift method can now be determined
directly with the #selector expression, e.g.,:
```swift
let sel = #selector(insertSubview(_:aboveSubview:)) // sel has type Selector
```
Along with this change, the use of string literals as selectors has
been deprecated, e.g.,
```swift
let sel: Selector = "insertSubview:aboveSubview:"
```
Generally, such string literals should be replaced with uses of
`#selector`, and the compiler will provide Fix-Its that use
`#selector`. In cases where this is not possible (e.g., when referring
to the getter of a property), one can still directly construct
selectors, e.g.:
```swift
let sel = Selector("propertyName")
```
Note that the compiler is now checking the string literals used to
construct Selectors to ensure that they are well-formed Objective-C
selectors and that there is an `@objc` method with that selector.
## Swift 2.1
### 2015-10-21 (Xcode 7.1)
* Enums imported from C now automatically conform to the `Equatable` protocol,
including a default implementation of the `==` operator. This conformance
allows you to use C enum pattern matching in switch statements with no
additional code. **(17287720)**
* The `NSNumber.unsignedIntegerValue` property now has the type `UInt` instead
of `Int`, as do other methods and properties that use the `NSUInteger` type
in Objective-C and whose names contain `unsigned..`. Most other uses of
`NSUInteger` in system frameworks are imported as `Int` as they were in
Xcode 7. **(19134055)**
* Field getters and setters are now created for named unions imported from C.
In addition, an initializer with a named parameter for the field is provided.
For example, given the following Objective-C `typedef`:
```objc
typedef union IntOrFloat {
int intField;
float floatField;
} IntOrFloat;
```
Importing this `typedef` into Swift generates the following interface:
```swift
struct IntOrFloat {
var intField: Int { get set }
init(intField: Int)
var floatField: Float { get set }
init(floatField: Float)
}
```
**(19660119)**
* Bitfield members of C structs are now imported into Swift. **(21702107)**
* The type `dispatch_block_t` now refers to the type
`@convention(block) () -> Void`, as it did in Swift 1.2.
This change allows programs using `dispatch_block_create` to work as expected,
solving an issue that surfaced in Xcode 7.0 with Swift 2.0.
**Note:** Converting to a Swift closure value and back is not guaranteed to
preserve the identity of a `dispatch_block_t`.
**(22432170)**
* Editing a file does not trigger a recompile of files that depend upon it if
the edits only modify declarations marked private. **(22239821)**
* Expressions interpolated in strings may now contain string literals.
For example, `My name is \(attributes["name"]!)` is now a valid expression.
**(14050788)**
* Error messages produced when the type checker cannot solve its constraint
system continue to improve in many cases.
For example, errors in the body of generic closures (for instance, the
argument closure to `map`) are much more usefully diagnosed. **(18835890)**
* Conversions between function types are supported, exhibiting covariance in
function result types and contravariance in function parameter types.
For example, it is legal to assign a function of type `Any -> Int` to a
variable of type `String -> Any`. **(19517003)**
## Swift 2.0
### 2015-09-17 (Xcode 7.0)
#### Swift Language Features
* New `defer` statement. This statement runs cleanup code when the scope is
exited, which is particularly useful in conjunction with the new error
handling model. For example:
```swift
func xyz() throws {
let f = fopen("x.txt", "r")
defer { fclose(f) }
try foo(f) // f is closed if an error is propagated.
let f2 = fopen("y.txt", "r")
defer { fclose(f2) }
try bar(f, f2) // f2 is closed, then f is closed if an error is propagated.
} // f2 is closed, then f is closed on a normal path
```
**(17302850)**
* Printing values of certain `enum` types shows the enum `case` and payload, if
any. This is not supported for `@objc` enums or certain enums with multiple
payloads. **(18334936)**
* You can specify availability information on your own declarations with the
`@available()` attribute.
For example:
```swift
@available(iOS 8.0, OSX 10.10, *)
func startUserActivity() -> NSUserActivity {
...
}
```
This code fragment indicates that the `startUserActivity()` method is
available on iOS 8.0+, on OS X v10.10+, and on all versions of any other
platform. **(20938565)**
* A new `@nonobjc` attribute is introduced to selectively suppress ObjC export
for instance members that would otherwise be `@objc`. **(16763754)**
* Nongeneric classes may now inherit from generic classes. **(15520519)**
* Public extensions of generic types are now permitted.
```swift
public extension Array { ... }
```
**(16974298)**
* Enums now support multiple generic associated values, for example:
```swift
enum Either<T, U> {
case Left(T), Right(U)
}
```
**(15666173)**
* **Protocol extensions**: Extensions can be written for protocol types.
With these extensions, methods and properties can be added to any type that
conforms to a particular protocol, allowing you to reuse more of your code.
This leads to more natural caller side "dot" method syntax that follows the
principle of "fluent interfaces" and that makes the definition of generic
code simpler (reducing "angle bracket blindness"). **(11735843)**
* **Protocol default implementations**: Protocols can have default
implementations for requirements specified in a protocol extension, allowing
"mixin" or "trait" like patterns.
* **Availability checking**. Swift reports an error at compile time if you call an
API that was introduced in a version of the operating system newer than the
currently selected deployment target.
To check whether a potentially unavailable API is available at runtime, use
the new `#available()` condition in an if or guard statement. For example:
```swift
if #available(iOS 8.0, OSX 10.10, *) {
// Use Handoff APIs when available.
let activity =
NSUserActivity(activityType:"com.example.ShoppingList.view")
activity.becomeCurrent()
} else {
// Fall back when Handoff APIs not available.
}
```
**(14586648)**
* Native support for C function pointers: C functions that take function pointer
arguments can be called using closures or global functions, with the
restriction that the closure must not capture any of its local context.
For example, the standard C qsort function can be invoked as follows:
```swift
var array = [3, 14, 15, 9, 2, 6, 5]
qsort(&array, array.count, sizeofValue(array[0])) { a, b in
return Int32(UnsafePointer<Int>(a).memory - UnsafePointer<Int>(b).memory)
}
print(array)
```
**(16339559)**
* **Error handling**. You can create functions that `throw`, `catch`, and manage
errors in Swift.
Using this capability, you can surface and deal with recoverable
errors, such as "file-not-found" or network timeouts. Swift's error handling
interoperates with `NSError`. **(17158652)**
* **Testability**: Tests of Swift 2.0 frameworks and apps are written without
having to make internal routines public.
Use `@testable import {ModuleName}` in your test source code to make all
public and internal routines usable. The app or framework target needs to be
compiled with the `Enable Testability` build setting set to `Yes`. The `Enable
Testability` build setting should be used only in your Debug configuration,
because it prohibits optimizations that depend on not exporting internal
symbols from the app or framework. **(17732115)**
* if statements can be labeled, and labeled break statements can be used as a
jump out of the matching if statement.
An unlabeled break does not exit the if statement. It exits the enclosing
loop or switch statement, or it is illegal if none exists. (19150249)
* A new `x?` pattern can be used to pattern match against optionals as a
synonym for `.Some(x)`. **(19382878)**
* Concatenation of Swift string literals, including across multiple lines, is
now a guaranteed compile-time optimization, even at `-Onone`. **(19125926)**
* Nested functions can now recursively reference themselves and other nested
functions. **(11266246)**
* Improved diagnostics:
- A warning has been introduced to encourage the use of let instead of var
when appropriate.
- A warning has been introduced to signal unused variables.
- Invalid mutation diagnostics are more precise.
- Unreachable switch cases cause a warning.
- The switch statement "exhaustiveness checker" is smarter.
**(15975935,20130240)**
* Failable convenience initializers are allowed to return `nil` before calling
`self.init`.
Designated initializers still must initialize all stored properties before
returning `nil`; this is a known limitation. **(20193929)**
* A new `readLine()` function has been added to the standard library.
**(15911365)**
* **SIMD Support**: Clang extended vectors are imported and usable in Swift.
This capability enables many graphics and other low-level numeric APIs
(for example, `simd.h`) to be usable in Swift.
* New `guard` statement: This statement allows you to model an early exit out
of a scope.
For example:
```swift
guard let z = bar() else { return }
use(z)
```
The `else` block is required to exit the scope (for example, with `return`,
`throw`, `break`, `continue`, and so forth) or end in a call to a `@noreturn`
function. **(20109722)**
* Improved pattern matching: `switch`/`case` pattern matching is available to
many new conditional control flow statements, including `if`/`case`,
`while`/`case`, `guard`/`case`, and `for-in`/`case`. `for-in` statements can
also have `where` clauses, which combine to support many of the features of
list comprehensions in other languages.
* A new `do` statement allows scopes to be introduced with the `do` statement.
For example:
```swift
do {
//new scope
do {
//another scope
}
}
```
#### Swift Enhancements and Changes
* A new keyword `try?` has been added to Swift.
`try?` attempts to perform an operation that may throw. If the operation
succeeds, the result is wrapped in an optional; if it fails (that is, if an
error is thrown), the result is `nil` and the error is discarded.
For example:
```swift
func produceGizmoUsingTechnology() throws -> Gizmo { ... }
func produceGizmoUsingMagic() throws -> Gizmo { ... }
if let result = try? produceGizmoUsingTechnology() { return result }
if let result = try? produceGizmoUsingMagic() { return result }
print("warning: failed to produce a Gizmo in any way")
return nil
```
`try?` always adds an extra level of `Optional` to the result type of the
expression being evaluated. If a throwing function's normal return type is
`Int?`, the result of calling it with `try?` will be `Int??`, or
`Optional<Optional<Int>>`. **(21692467)**
* Type names and enum cases now print and convert to `String` without
qualification by default. `debugPrint` or `String(reflecting:)` can still be
used to get fully qualified names. For example:
```swift
enum Fruit { case Apple, Banana, Strawberry }
print(Fruit.Apple) // "Apple"
debugPrint(Fruit.Apple) // "MyApp.Fruit.Apple")
```
**(21788604)**
* C `typedef`s of block types are imported as `typealias`s for Swift closures.
The primary result of this is that `typedef`s for blocks with a parameter of
type `BOOL` are imported as closures with a parameter of type `Bool` (rather
than `ObjCBool` as in the previous release). This matches the behavior of
block parameters to imported Objective-C methods. **(22013912)**
* The type `Boolean` in `MacTypes.h` is imported as `Bool` in contexts that allow
bridging between Swift and Objective-C types.
In cases where the representation is significant, `Boolean` is imported as a
distinct `DarwinBoolean` type, which is `BooleanLiteralConvertible` and can be
used in conditions (much like the `ObjCBool` type). **(19013551)**
* Fields of C structs that are marked `__unsafe_unretained` are presented in
Swift using `Unmanaged`.
It is not possible for the Swift compiler to know if these references are
really intended to be strong (+1) or unretained (+0). **(19790608)**
* The `NS_REFINED_FOR_SWIFT` macro can be used to move an Objective-C
declaration aside to provide a better version of the same API in Swift,
while still having the original implementation available. (For example, an
Objective-C API that takes a `Class` could offer a more precise parameter
type in Swift.)
The `NS_REFINED_FOR_SWIFT` macro operates differently on different declarations:
- `init` methods will be imported with the resulting Swift initializer having
`__` prepended to its first external parameter name.
```objc
// Objective-C
- (instancetype)initWithClassName:(NSString *)name NS_REFINED_FOR_SWIFT;
```
```swift
// Swift
init(__className: String)
```
- Other methods will be imported with `__` prepended to their base name.
```objc
// Objective-C
- (NSString *)displayNameForMode:(DisplayMode)mode NS_REFINED_FOR_SWIFT;
```
```swift
// Swift
func __displayNameForMode(mode: DisplayMode) -> String
```
- Subscript methods will be treated like any other methods and will not be
imported as subscripts.
- Other declarations will have `__` prepended to their name.
```objc
// Objective-C
@property DisplayMode mode NS_REFINED_FOR_SWIFT;
```
```swift
// Swift
var __mode: DisplayMode { get set }
```
**(20070465)**
* Xcode provides context-sensitive code completions for enum elements and
option sets when using the shorter dot syntax. **(16659653)**
* The `NSManaged` attribute can be used with methods as well as properties,
for access to Core Data's automatically generated Key-Value-Coding-compliant
to-many accessors.
```swift
@NSManaged var employees: NSSet
@NSManaged func addEmployeesObject(employee: Employee)
@NSManaged func removeEmployeesObject(employee: Employee)
@NSManaged func addEmployees(employees: NSSet)
@NSManaged func removeEmployees(employees: NSSet)
```
These can be declared in your `NSManagedObject` subclass. **(17583057)**
* The grammar has been adjusted so that lines beginning with '.' are always
parsed as method or property lookups following the previous line, allowing
for code formatted like this to work:
```swift
foo
.bar
.bas = 68000
```
It is no longer possible to begin a line with a contextual static member
lookup (for example, to say `.staticVar = MyType()`). **(20238557)**
* Code generation for large `struct` and `enum` types has been improved to reduce
code size. **(20598289)**
* Nonmutating methods of structs, enums, and protocols may now be partially
applied to their self parameter:
```swift
let a: Set<Int> = [1, 2, 3]
let b: [Set<Int>] = [[1], [4]]
b.map(a.union) // => [[1, 2, 3], [1, 2, 3, 4]]
```
**(21091944)**
* Swift documentation comments recognize a new top-level list
item: `- Throws: ...`
This item is used to document what errors can be thrown and why. The
documentation appears alongside parameters and return descriptions in Xcode
QuickHelp. **(21621679)**
* Unnamed parameters now require an explicit `_:` to indicate that they are
unnamed. For example, the following is now an error:
```swift
func f(Int) { }
```
and must be written as:
```swift
func f(_: Int) { }
```
This simplifies the argument label model and also clarifies why cases like
`func f((a: Int, b: Int))` do not have parameters named `a` and `b`.
**(16737312)**
* It is now possible to append a tuple to an array. **(17875634)**
* The ability to refer to the 0 element of a scalar value (producing the
scalar value itself) has been removed. **(17963034)**
* Variadic parameters can now appear anywhere in the parameter list for a
function or initializer. For example:
```swift
func doSomethingToValues(values: Int... , options: MyOptions = [], fn: (Int) -> Void) { ... }
```
**(20127197)**
* Generic subclasses of Objective-C classes are now supported. **(18505295)**
* If an element of an enum with string raw type does not have an explicit raw
value, it will default to the text of the enum's name. For example:
```swift
enum WorldLayer : String {
case Ground, BelowCharacter, Character
}
```
is equivalent to:
```swift
enum WorldLayer : String {
case Ground = "Ground"
case BelowCharacter = "BelowCharacter"
case Character = "Character"
}
```
**(15819953)**
* The `performSelector` family of APIs is now available for Swift code.
**(17227475)**
* When delegating or chaining to a failable initializer (for example, with
`self.init(...)` or `super.init(...)`), one can now force-unwrap the result with
`!`. For example:
```swift
extension UIImage {
enum AssetIdentifier: String {
case Isabella
case William
case Olivia
}
convenience init(assetIdentifier: AssetIdentifier) {
self.init(named: assetIdentifier.rawValue)!
}
}
```
**(18497407)**
* Initializers can now be referenced like static methods by referring to
`.init` on a static type reference or type object. For example:
```swift
let x = String.init(5)
let stringType = String.self
let y = stringType.init(5)
let oneTwoThree = [1, 2, 3].map(String.init).reduce("", combine: +)
```
`.init` is still implicit when constructing using a static type, as in
`String(5)`. `.init` is required when using dynamic type objects or when
referring to the initializer as a function value. **(21375845)**
* Enums and cases can now be marked indirect, which causes the associated
value for the enum to be stored indirectly, allowing for recursive data
structures to be defined. For example:
```swift
enum List<T> {
case Nil
indirect case Cons(head: T, tail: List<T>)
}
indirect enum Tree<T> {
case Leaf(T)
case Branch(left: Tree<T>, right: Tree<T>)
}
```
**(21643855)**
* Formatting for Swift expression results has changed significantly when
using `po` or `expr -O`. Customization that was introduced has been refined
in the following ways:
- The formatted summary provided by either `debugDescription` or
`description` methods will always be used for types that conform to
`CustomDebugStringConvertible` or `CustomStringConvertible` respectively.
When neither conformance is present, the type name is displayed and
reference types also display the referenced address to more closely mimic
existing behavior for Objective-C classes.
- Value types such as enums, tuples, and structs display all members
indented below the summary by default, while reference types will not. This
behavior can be customized for all types by implementing
`CustomReflectable`.
These output customizations can be bypassed by using `p` or `expr` without
the `-O` argument to provide a complete list of all fields and their values.
**(21463866)**
* Properties and methods using `Unmanaged` can now be exposed to Objective-C.
**(16832080)**
* Applying the `@objc` attribute to a class changes that class's compile-time
name in the target's generated Objective-C header as well as changing its
runtime name. This applies to protocols as well. For example:
```swift
// Swift
@objc(MyAppDelegate)
class AppDelegate : NSObject, UIApplicationDelegate {
// ...
}
```
```objc
// Objective-C
@interface MyAppDelegate : NSObject <UIApplicationDelegate>
// ...
@end
```
**(17469485)**
* Collections containing types that are not Objective-C compatible are no
longer considered Objective-C compatible types themselves.
For example, previously `Array<SwiftClassType>` was permitted as the type
of a property marked `@objc`; this is no longer the case. **(19787270)**
* Generic subclasses of Objective-C classes, as well as nongeneric classes
that inherit from such a class, require runtime metadata instantiation and
cannot be directly named from Objective-C code.
When support for generic subclasses of Objective-C classes was first added,
the generated Objective-C bridging header erroneously listed such classes,
which, when used, could lead to incorrect runtime behavior or compile-time
errors. This has been fixed.
The behavior of the `@objc` attribute on a class has been clarified such that
applying `@objc` to a class which cannot appear in a bridging header is now
an error.
Note that this change does not result in a change of behavior with valid
code because members of a class are implicitly `@objc` if any superclass of
the class is an `@objc` class, and all `@objc` classes must inherit from
NSObject. **(21342574)**
* The performance of `-Onone` (debug) builds has been improved by using
prespecialized instances of generics in the standard library. It produces
significantly faster executables in debug builds in many cases, without
impacting compile time. **(20486658)**
* `AnyObject` and `NSObject` variables that refer to class objects can be cast
back to class object types. For example, this code succeeds:
```swift
let x: AnyObject = NSObject.self
let y = x as! NSObject.Type
```
Arrays, dictionaries, and sets that contain class objects successfully
bridge with `NSArray`, `NSDictionary`, and `NSSet` as well. Objective-C APIs
that provide `NSArray<Class> *` objects, such as `-[NSURLSessionConfiguration
protocolClasses]`, now work correctly when used in Swift. **(16238475)**
* `print()` and reflection via Mirrors is able to report both the current
case and payload for all enums with multiple payload types. The only
remaining enum types that do not support reflection are `@objc` enums and
enums imported from C. **(21739870)**
* Enum cases with payloads can be used as functions. For example:
```swift
enum Either<T, U> { case Left(T), Right(U) }
let lefts: [Either<Int, String>] = [1, 2, 3].map(Either.Left)
let rights: [Either<Int, String>] = ["one", "two", "three"].map(Either.Right)
```
**(19091028)**
* `ExtensibleCollectionType` has been folded into
`RangeReplaceableCollectionType`. In addition, default implementations have
been added as methods, which should be used instead of the free Swift
module functions related to these protocols. **(18220295)**
#### Swift Standard Library
* The standard library moved many generic global functions (such as `map`,
`filter`, and `sort`) to be methods written with protocol extensions. This
allows those methods to be pervasively available on all sequence and
collection types and allowed the removal of the global functions.
* Deprecated enum elements no longer affect the names of nondeprecated
elements when an Objective-C enum is imported into Swift. This may cause
the Swift names of some enum elements to change. **(17686122)**
* All enums imported from C are `RawRepresentable`, including those not
declared with `NS_ENUM` or `NS_OPTIONS`. As part of this change, the value
property of such enums has been renamed `rawValue`. **(18702016)**
* Swift documentation comments use a syntax based on the Markdown format,
aligning them with rich comments in playgrounds.
- Outermost list items are interpreted as special fields and are highlighted
in Xcode QuickHelp.
- There are two methods of documenting parameters: parameter outlines and
separate parameter fields. You can mix and match these forms as you see
fit in any order or continuity throughout the doc comment. Because these
are parsed as list items, you can nest arbitrary content underneath them.
- Parameter outline syntax:
```swift
- Parameters:
- x: ...
- y: ...
```
- Separate parameter fields:
```swift
- parameter x: ...
- parameter y: ...
```
- Documenting return values:
```swift
- returns: ...
```
Other special fields are highlighted in QuickHelp, as well as rendering
support for all of Markdown. (20180161)
* The `CFunctionPointer<T -> U>` type has been removed. C function types are
specified using the new `@convention(c)` attribute. Like other function
types, `@convention(c) T -> U` is not nullable unless made optional. The
`@objc_block` attribute for specifying block types has also been removed and
replaced with `@convention(block)`.
* Methods and functions have the same rules for parameter names. You can omit
providing an external parameter name with `_`. To further simplify the model,
the shorthand `#` for specifying a parameter name has been removed, as have
the special rules for default arguments.
```swift
// Declaration
func printFunction(str: String, newline: Bool)
func printMethod(str: String, newline: Bool)
func printFunctionOmitParameterName(str: String, _ newline: Bool)
// Call
printFunction("hello", newline: true)
printMethod("hello", newline: true)
printFunctionOmitParameterName("hello", true)
```
**(17218256)**
* `NS_OPTIONS` types get imported as conforming to the `OptionSetType` protocol,
which presents a set-like interface for options. Instead of using bitwise
operations such as:
```swift
// Swift 1.2:
object.invokeMethodWithOptions(.OptionA | .OptionB)
object.invokeMethodWithOptions(nil)
if options @ .OptionC == .OptionC {
// .OptionC is set
}
```
Option sets support set literal syntax, and set-like methods such as contains:
```swift
object.invokeMethodWithOptions([.OptionA, .OptionB])
object.invokeMethodWithOptions([])
if options.contains(.OptionC) {
// .OptionC is set
}
```
A new option set type can be written in Swift as a struct that conforms to
the `OptionSetType` protocol. If the type specifies a `rawValue` property and
option constants as `static let` constants, the standard library will provide
default implementations of the rest of the option set API:
```swift
struct MyOptions: OptionSetType {
let rawValue: Int
static let TuringMachine = MyOptions(rawValue: 1)
static let LambdaCalculus = MyOptions(rawValue: 2)
static let VonNeumann = MyOptions(rawValue: 4)
}
let churchTuring: MyOptions = [.TuringMachine, .LambdaCalculus]
```
**(18069205)**
* Type annotations are no longer allowed in patterns and are considered part
of the outlying declaration. This means that code previously written as:
```swift
var (a : Int, b : Float) = foo()
```
needs to be written as:
```swift
var (a, b) : (Int, Float) = foo()
```
if an explicit type annotation is needed. The former syntax was ambiguous
with tuple element labels. **(20167393)**
* The `do`/`while` loop is renamed to `repeat`/`while` to make it obvious
whether a statement is a loop from its leading keyword.
In Swift 1.2:
```swift
do {
...
} while <condition>
```
In Swift 2.0:
```swift
repeat {
...
} while <condition>
```
**(20336424)**
* `forEach` has been added to `SequenceType`. This lets you iterate over
elements of a sequence, calling a body closure on each. For example:
```swift
(0..<10).forEach {
print($0)
}
```
This is very similar to the following:
```swift
for x in 0..<10 {
print(x)
}
```
But take note of the following differences:
- Unlike for-in loops, you can't use `break` or `continue` to exit the current
call of the body closure or skip subsequent calls.
- Also unlike for-in loops, using `return` in the body closure only exits from
the current call to the closure, not any outer scope, and won't skip
subsequent calls.
**(18231840)**
* The `Word` and `UWord` types have been removed from the standard library; use
`Int` and `UInt` instead. **(18693488)**
* Most standard library APIs that take closures or `@autoclosure` parameters
now use `rethrows`. This allows the closure parameters to methods like `map`
and `filter` to throw errors, and allows short-circuiting operators like `&&`,
`||`, and `??` to work with expressions that may produce errors.
**(21345565)**
* SIMD improvements: Integer vector types in the simd module now only support
unchecked arithmetic with wraparound semantics using the `&+`, `&-`, and `&*`
operators, in order to better support the machine model for vectors.
The `+`, `-`, and `*` operators are unavailable on integer vectors, and Xcode
automatically suggests replacing them with the wrapping operators.
Code generation for vector types in the simd module has been improved to
better utilize vector hardware, leading to dramatically improved performance
in many cases. **(21574425)**
* All `CollectionType` objects are now sliceable. `SequenceType` now has a notion
of `SubSequence`, which is a type that represents only some of the values but
in the same order. For example, the `ArraySubSequence` type is `ArraySlice`,
which is an efficient view on the `Array` type's buffer that avoids copying as
long as it uniquely references the `Array` from which it came.
The following free Swift functions for splitting/slicing sequences have been
removed and replaced by method requirements on the `SequenceType` protocol
with default implementations in protocol extensions. `CollectionType` has
specialized implementations, where possible, to take advantage of efficient
access of its elements.
```swift
/// Returns the first `maxLength` elements of `self`,
/// or all the elements if `self` has fewer than `maxLength` elements.
prefix(maxLength: Int) -> SubSequence
/// Returns the last `maxLength` elements of `self`,
/// or all the elements if `self` has fewer than `maxLength` elements.
suffix(maxLength: Int) -> SubSequence
/// Returns all but the first `n` elements of `self`.
dropFirst(n: Int) -> SubSequence
/// Returns all but the last `n` elements of `self`.
dropLast(n: Int) -> SubSequence
/// Returns the maximal `SubSequence`s of `self`, in order, that
/// don't contain elements satisfying the predicate `isSeparator`.
split(maxSplits maxSplits: Int, allowEmptySlices: Bool, @noescape isSeparator: (Generator.Element) -> Bool) -> [SubSequence]
```
The following convenience extension is provided for `split`:
```swift
split(separator: Generator.Element, maxSplit: Int, allowEmptySlices: Bool) -> [SubSequence]
```
Also, new protocol requirements and default implementations on
`CollectionType` are now available:
```swift
/// Returns `self[startIndex..<end]`
prefixUpTo(end: Index) -> SubSequence
/// Returns `self[start..<endIndex]`
suffixFrom(start: Index) -> SubSequence
/// Returns `prefixUpTo(position.successor())`
prefixThrough(position: Index) -> SubSequence
```
**(21663830)**
* The `print` and `debugPrint` functions are improved:
- Both functions have become variadic, and you can print any number of items
with a single call.
- `separator: String = " "` was added so you can control how the items are
separated.
- `terminator: String = "\n"` replaced `appendNewline: bool = true.` With
this change, `print(x, appendNewline: false)` is expressed as
`print(x, terminator: "")`.
- For the variants that take an output stream, the argument label `toStream`
was added to the stream argument.
The `println` function from Swift 1.2 has been removed. **(21788540)**
* For consistency and better composition of generic code, `ArraySlice` indices
are no longer always zero-based but map directly onto the indices of the
collection they are slicing and maintain that mapping even after mutations.
Before:
```swift
var a = Array(0..<10)
var s = a[5..<10]
s.indices // 0..<5
s[0] = 111
s // [111, 6, 7, 8, 9]
s.removeFirst()
s.indices // 1..<5
```
After:
```swift
var a = Array(0..<10)
var s = a[5..<10]
s.indices // 5..<10
s[5] = 99
s // [99, 6, 7, 8, 9]
s.removeFirst()
s.indices // 6..<10
```
Rather than define variants of collection algorithms that take explicit
subrange arguments, such as `a.sortSubrangeInPlace(3..<7)`, the Swift
standard library provides "slicing," which composes well with algorithms.
This enables you to write `a[3..<7].sortInPlace()`, for example. With most
collections, these algorithms compose naturally.
For example, before this change was incorporated:
```swift
extension MyIntCollection {
func prefixThroughFirstNegativeSubrange() -> SubSequence {
// Find the first negative element
let firstNegative = self.indexOf { $0 < 0 } ?? endIndex
// Slice off non-negative prefix
let startsWithNegative = self.suffixFrom(firstNegative)
// Find the first non-negative position in the slice
let end = startsWithNegative.indexOf { $0 >= 0 } ?? endIndex
return self[startIndex..<end]
}
}
```
The above code would work for any collection of `Int`s unless the collection
is an `Array<Int>`. Unfortunately, when array slice indices are zero-based,
the last two lines of the method need to change to:
```swift
let end = startsWithNegative.indexOf { $0 >= 0 }
?? startsWithNegative.endIndex
return self[startIndex..<end + firstNegative]
```
These differences made working with slices awkward, error-prone, and
nongeneric.
After this change, Swift collections start to provide a guarantee that, at
least until there is a mutation, slice indices are valid in the collection
from which they were sliced, and refer to the same elements. **(21866825)**
* The method `RangeReplaceableCollectionType.extend()` was renamed to
`appendContentsOf()`, and the `splice()` method was renamed to
`insertContentsOf()`. **(21972324)**
* `find` has been renamed to `indexOf()`, sort has been renamed to
`sortInPlace()`, and `sorted()` becomes `sort()`.
* `String.toInt()` has been renamed to a failable `Int(String)` initializer,
since initialization syntax is the preferred style for type conversions.
* `String` no longer conforms to `SequenceType` in order to prevent non-Unicode
correct sequence algorithms from being prominently available on String. To
perform grapheme-cluster-based, UTF-8-based, or UTF-16-based algorithms, use
the `.characters`, `.utf8`, and `.utf16` projections respectively.
* Generic functions that declare type parameters not used within the generic
function's type produce a compiler error. For example:
```swift
func foo<T>() { } // error: generic parameter 'T' is not used in function signature
```
* The `Dictionary.removeAtIndex(_:)` method now returns the key-value pair
being removed as a two-element tuple (rather than returning `Void`).
Similarly, the `Set.removeAtIndex(_:)` method returns the element being
removed. **(20299881)**
* Generic parameters on types in the Swift standard library have been renamed
to reflect the role of the types in the API. For example, `Array<T>` became
`Array<Element>`, `UnsafePointer<T>` became `UnsafePointer<Memory>`, and so
forth. **(21429126)**
* The `SinkType` protocol and `SinkOf` struct have been removed from the standard
library in favor of `(T) -> ()` closures. **(21663799)**
## Swift 1.2
### 2015-04-08 (Xcode 6.3)
#### Swift Language Changes
* The notions of guaranteed conversion and "forced failable" conversion are now
separated into two operators. Forced failable conversion now uses the `as!`
operator. The `!` makes it clear to readers of code that the cast may fail and
produce a runtime error. The `as` operator remains for upcasts
(e.g. `someDerivedValue as Base`) and type annotations (`0 as Int8`) which
are guaranteed to never fail. **(19031957)**
* Immutable (`let`) properties in `struct` and `class` initializers have been
revised to standardize on a general "`let`s are singly initialized but never
reassigned or mutated" model. Previously, they were completely mutable
within the body of initializers. Now, they are only allowed to be assigned
to once to provide their value. If the property has an initial value in its
declaration, that counts as the initial value for all initializers.
**(19035287)**
* The implicit conversions from bridged Objective-C classes
(`NSString`/`NSArray`/`NSDictionary`) to their corresponding Swift value types
(`String`/`Array`/`Dictionary`) have been removed, making the Swift type
system simpler and more predictable.
This means that the following code will no longer work:
```swift
import Foundation
func log(s: String) { println(x) }
let ns: NSString = "some NSString" // okay: literals still work
log(ns) // fails with the error
// "'NSString' is not convertible to 'String'"
```
In order to perform such a bridging conversion, make the conversion explicit
with the as keyword:
```swift
log(ns as String) // succeeds
```
Implicit conversions from Swift value types to their bridged Objective-C
classes are still permitted. For example:
```swift
func nsLog(ns: NSString) { println(ns) }
let s: String = "some String"
nsLog(s) // okay: implicit conversion from String to NSString is permitted
```
Note that these Cocoa types in Objective-C headers are still automatically
bridged to their corresponding Swift type, which means that code is only
affected if it is explicitly referencing (for example) `NSString` in a Swift
source file. It is recommended you use the corresponding Swift types (for
example, `String`) directly unless you are doing something advanced, like
implementing a subclass in the class cluster. **(18311362)**
* The `@autoclosure` attribute is now an attribute on a parameter, not an
attribute on the parameter's type.
Where before you might have used
```swift
func assert(predicate : @autoclosure () -> Bool) {...}
```
you now write this as
```swift
func assert(@autoclosure predicate : () -> Bool) {...}
```
**(15217242)**
* The `@autoclosure` attribute on parameters now implies the new `@noescape`
attribute.
* Curried function parameters can now specify argument labels.
For example:
```swift
func curryUnnamed(a: Int)(_ b: Int) { return a + b }
curryUnnamed(1)(2)
func curryNamed(first a: Int)(second b: Int) -> Int { return a + b }
curryNamed(first: 1)(second: 2)
```
**(17237268)**
* Swift now detects discrepancies between overloading and overriding in the
Swift type system and the effective behavior seen via the Objective-C runtime.
For example, the following conflict between the Objective-C setter for
`property` in a class and the method `setProperty` in its extension is now
diagnosed:
```swift
class A : NSObject {
var property: String = "Hello" // note: Objective-C method 'setProperty:'
// previously declared by setter for
// 'property' here
}
extension A {
func setProperty(str: String) { } // error: method 'setProperty'
// redeclares Objective-C method
//'setProperty:'
}
```
Similar checking applies to accidental overrides in the Objective-C runtime:
```swift
class B : NSObject {
func method(arg: String) { } // note: overridden declaration
// here has type '(String) -> ()'
}
class C : B {
func method(arg: [String]) { } // error: overriding method with
// selector 'method:' has incompatible
// type '([String]) -> ()'
}
```
as well as protocol conformances:
```swift
class MyDelegate : NSObject, NSURLSessionDelegate {
func URLSession(session: NSURLSession, didBecomeInvalidWithError:
Bool){ } // error: Objective-C method 'URLSession:didBecomeInvalidWithError:'
// provided by method 'URLSession(_:didBecomeInvalidWithError:)'
// conflicts with optional requirement method
// 'URLSession(_:didBecomeInvalidWithError:)' in protocol
// 'NSURLSessionDelegate'
}
```
**(18391046, 18383574)**
* The precedence of the Nil Coalescing Operator (`??`) has been raised to bind
tighter than short-circuiting logical and comparison operators, but looser
than as conversions and range operators. This provides more useful behavior
for expressions like:
```swift
if allowEmpty || items?.count ?? 0 > 0 {...}
```
* The `&/` and `&%` operators were removed, to simplify the language and
improve consistency.
Unlike the `&+`, `&-`, and `&*` operators, these operators did not provide
two's-complement arithmetic behavior; they provided special case behavior
for division, remainder by zero, and `Int.min/-1`. These tests should be
written explicitly in the code as comparisons if needed. **(17926954)**
* Constructing a `UInt8` from an ASCII value now requires the ascii keyword
parameter. Using non-ASCII unicode scalars will cause this initializer to
trap. **(18509195)**
* The C `size_t` family of types are now imported into Swift as `Int`, since
Swift prefers sizes and counts to be represented as signed numbers, even if
they are non-negative.
This change decreases the amount of explicit type conversion between `Int`
and `UInt`, better aligns with `sizeof` returning `Int`, and provides safer
arithmetic properties. **(18949559)**
* Classes that do not inherit from `NSObject` but do adopt an `@objc` protocol
will need to explicitly mark those methods, properties, and initializers
used to satisfy the protocol requirements as `@objc`.
For example:
```swift
@objc protocol SomethingDelegate {
func didSomething()
}
class MySomethingDelegate : SomethingDelegate {
@objc func didSomething() { ... }
}
```
#### Swift Language Fixes
* Dynamic casts (`as!`, `as?` and `is`) now work with Swift protocol types, so
long as they have no associated types. **(18869156)**
* Adding conformances within a Playground now works as expected.
For example:
```swift
struct Point {
var x, y: Double
}
extension Point : Printable {
var description: String {
return "(\(x), \(y))"
}
}
var p1 = Point(x: 1.5, y: 2.5)
println(p1) // prints "(1.5, 2.5)"
```
* Imported `NS_ENUM` types with undocumented values, such as
`UIViewAnimationCurve`, can now be converted from their raw integer values
using the `init(rawValue:)` initializer without being reset to `nil`. Code
that used `unsafeBitCast` as a workaround for this issue can be written to
use the raw value initializer.
For example,
```swift
let animationCurve =
unsafeBitCast(userInfo[UIKeyboardAnimationCurveUserInfoKey].integerValue,
UIViewAnimationCurve.self)
```
can now be written instead as
```swift
let animationCurve = UIViewAnimationCurve(rawValue:
userInfo[UIKeyboardAnimationCurveUserInfoKey].integerValue)!
```
**(19005771)**
* Negative floating-point literals are now accepted as raw values in enums.
**(16504472)**
* Unowned references to Objective-C objects, or Swift objects inheriting from
Objective-C objects, no longer cause a crash if the object holding the
unowned reference is deallocated after the referenced object has been
released. **(18091547)**
* Variables and properties with observing accessors no longer require an
explicit type if it can be inferred from the initial value expression.
**(18148072)**
* Generic curried functions no longer produce random results when fully
applied. **(18988428)**
* Comparing the result of a failed `NSClassFromString` lookup against `nil` now
behaves correctly. **(19318533)**
* Subclasses that override base class methods with co- or contravariance in
Optional types no longer cause crashes at runtime.
For example:
```swift
class Base {
func foo(x: String) -> String? { return x }
}
class Derived: Base {
override func foo(x: String?) -> String { return x! }
}
```
**(19321484)**
#### Swift Language Enhancements
* Swift now supports building targets incrementally, i.e. not rebuilding
every Swift source file in a target when a single file is changed.
The incremental build capability is based on a conservative dependency
analysis, so you may still see more files rebuilding than absolutely
necessary. If you find any cases where a file is not rebuilt when it should
be, please file a bug report. Running Clean on your target afterwards should
allow you to complete your build normally. **(18248514)**
* A new `Set` data structure is included which provides a generic collection of
unique elements with full value semantics. It bridges with `NSSet`, providing
functionality analogous to `Array` and `Dictionary`. **(14661754)**
* The `if-let` construct has been expanded to allow testing multiple optionals
and guarding conditions in a single `if` (or `while`) statement using syntax
similar to generic constraints:
```swift
if let a = foo(), b = bar() where a < b,
let c = baz() {
}
```
This allows you to test multiple optionals and include intervening boolean
conditions, without introducing undesirable nesting (for instance, to avoid
the optional unwrapping _"pyramid of doom"_).
Further, `if-let` now also supports a single leading boolean condition along
with optional binding `let` clauses. For example:
```swift
if someValue > 42 && someOtherThing < 19, let a = getOptionalThing() where a > someValue {
}
```
**(19797158, 19382942)**
* The `if-let` syntax has been extended to support a single leading boolean
condition along with optional binding `let` clauses.
For example:
```swift
if someValue > 42 && someOtherThing < 19, let a = getOptionalThing() where a > someValue {
}
```
**(19797158)**
* `let` constants have been generalized to no longer require immediate
initialization. The new rule is that a `let` constant must be initialized
before use (like a `var`), and that it may only be initialized: not
reassigned or mutated after initialization. This enables patterns such as:
```swift
let x: SomeThing
if condition {
x = foo()
} else {
x = bar()
}
use(x)
```
which formerly required the use of a `var`, even though there is no mutation
taking place. **(16181314)**
* `static` methods and properties are now allowed in classes (as an alias for
`class final`). You are now allowed to declare static stored properties in
classes, which have global storage and are lazily initialized on first
access (like global variables). Protocols now declare type requirements as
static requirements instead of declaring them as class requirements.
**(17198298)**
* Type inference for single-expression closures has been improved in several ways:
- Closures that are comprised of a single return statement are now type
checked as single-expression closures.
- Unannotated single-expression closures with non-`Void` return types can now
be used in `Void` contexts.
- Situations where a multi-statement closure's type could not be inferred
because of a missing return-type annotation are now properly diagnosed.
* Swift enums can now be exported to Objective-C using the `@objc` attribute.
`@objc` enums must declare an integer raw type, and cannot be generic or use
associated values. Because Objective-C enums are not namespaced, enum cases
are imported into Objective-C as the concatenation of the enum name and
case name.
For example, this Swift declaration:
```swift
// Swift
@objc
enum Bear: Int {
case Black, Grizzly, Polar
}
```
imports into Objective-C as:
```objc
// Objective-C
typedef NS_ENUM(NSInteger, Bear) {
BearBlack, BearGrizzly, BearPolar
};
```
**(16967385)**
* Objective-C language extensions are now available to indicate the nullability
of pointers and blocks in Objective-C APIs, allowing your Objective-C APIs
to be imported without `ImplicitlyUnwrappedOptional`. (See items below for
more details.) **(18868820)**
* Swift can now partially import C aggregates containing unions, bitfields,
SIMD vector types, and other C language features that are not natively
supported in Swift. The unsupported fields will not be accessible from
Swift, but C and Objective-C APIs that have arguments and return values of
these types can be used in Swift. This includes the Foundation `NSDecimal`
type and the `GLKit` `GLKVector` and `GLKMatrix` types, among others.
**(15951448)**
* Imported C structs now have a default initializer in Swift that initializes
all of the struct's fields to zero.
For example:
```swift
import Darwin
var devNullStat = stat()
stat("/dev/null", &devNullStat)
```
If a structure contains fields that cannot be correctly zero initialized
(i.e. pointer fields marked with the new `__nonnull` modifier), this default
initializer will be suppressed. **(18338802)**
* New APIs for converting among the `Index` types for `String`,
`String.UnicodeScalarView`, `String.UTF16View`, and `String.UTF8View` are
available, as well as APIs for converting each of the `String` views into
`String`s. **(18018911)**
* Type values now print as the full demangled type name when used with
`println` or string interpolation.
```swift
toString(Int.self) // prints "Swift.Int"
println([Float].self) // prints "Swift.Array<Swift.Float>"
println((Int, String).self) // prints "(Swift.Int, Swift.String)"
```
**(18947381)**
* A new `@noescape` attribute may be used on closure parameters to functions.
This indicates that the parameter is only ever called (or passed as an
`@noescape` parameter in a call), which means that it cannot outlive the
lifetime of the call. This enables some minor performance optimizations,
but more importantly disables the `self.` requirement in closure arguments.
This enables control-flow-like functions to be more transparent about their
behavior. In a future beta, the standard library will adopt this attribute
in functions like `autoreleasepool()`.
```swift
func autoreleasepool(@noescape code: () -> ()) {
pushAutoreleasePool()
code()
popAutoreleasePool()
}
```
**(16323038)**
* Performance is substantially improved over Swift 1.1 in many cases. For
example, multidimensional arrays are algorithmically faster in some cases,
unoptimized code is much faster in many cases, and many other improvements
have been made.
* The diagnostics emitted for expression type check errors are greatly
improved in many cases. **(18869019)**
* Type checker performance for many common expression kinds has been greatly
improved. This can significantly improve build times and reduces the number
of "expression too complex" errors. **(18868985)**
* The `@autoclosure` attribute has a second form, `@autoclosure(escaping)`, that
provides the same caller-side syntax as `@autoclosure` but allows the
resulting closure to escape in the implementation.
For example:
```swift
func lazyAssertion(@autoclosure(escaping) condition: () -> Bool,
message: String = "") {
lazyAssertions.append(condition) // escapes
}
lazyAssertion(1 == 2, message: "fail eventually")
```
**(19499207)**
#### Swift Performance
* A new compilation mode has been introduced for Swift called Whole Module
Optimization. This option optimizes all of the files in a target together
and enables better performance (at the cost of increased compile time). The
new flag can be enabled in Xcode using the `Whole Module Optimization` build
setting or by using the `swiftc` command line tool with the flag
`-whole-module-optimization`. **(18603795)**
#### Swift Standard Library Enhancements and Changes
* `flatMap` was added to the standard library. `flatMap` is the function that
maps a function over something and returns the result flattened one level.
`flatMap` has many uses, such as to flatten an array:
```swift
[[1,2],[3,4]].flatMap { $0 }
```
or to chain optionals with functions:
```swift
[[1,2], [3,4]].first.flatMap { find($0, 1) }
```
**(19881534)**
* The function `zip` was added. It joins two sequences together into one
sequence of tuples. **(17292393)**
* `utf16Count` is removed from `String`. Instead use count on the `UTF16` view
of the `String`.
For example:
```swift
count(string.utf16)
```
**(17627758)**
## Swift 1.1
### 2014-12-02 (Xcode 6.1.1)
* Class methods and initializers that satisfy protocol requirements now properly
invoke subclass overrides when called in generic contexts. For example:
```swift
protocol P {
class func foo()
}
class C: P {
class func foo() { println("C!") }
}
class D: C {
override class func foo() { println("D!") }
}
func foo<T: P>(x: T) {
x.dynamicType.foo()
}
foo(C()) // Prints "C!"
foo(D()) // Used to incorrectly print "C!", now prints "D!"
```
**(18828217)**
### 2014-10-09 (Xcode 6.1)
* Values of type `Any` can now contain values of function type. **(16406907)**
* Documentation for the standard library (displayed in quick help and in the
synthesized header for the Swift module) is improved. **(16462500)**
* Class properties don't need to be marked final to avoid `O(n)` mutations on
value semantic types. **(17416120)**
* Casts can now be performed between `CF` types (such as `CFString`, `CGImage`,
and `SecIdentity`) and AnyObject. Such casts will always succeed at run-time.
For example:
```swift
var cfStr: CFString = ...
var obj: AnyObject = cfStr as AnyObject
var cfStr = obj as CFString
```
**(18088474)**
* `HeapBuffer<Value, Element>`, `HeapBufferStorage<Value, Element>`, and
`OnHeap<Value>` were never really useful, because their APIs were
insufficiently public. They have been replaced with a single class,
`ManagedBuffer<Value, Element>`. See also the new function
`isUniquelyReferenced(x)` which is often useful in conjunction with
`ManagedBuffer`.
* The `Character` enum has been turned into a struct, to avoid
exposing its internal implementation details.
* The `countElements` function has been renamed `count`, for better
consistency with our naming conventions.
* Mixed-sign addition and subtraction operations, that were
unintentionally allowed in previous versions, now cause a
compilation error.
* OS X apps can now apply the `@NSApplicationMain` attribute to their app delegate
class in order to generate an implicit `main` for the app. This works like
the `@UIApplicationMain` attribute for iOS apps.
* Objective-C `init` and factory methods are now imported as failable
initializers when they can return `nil`. In the absence of information
about a potentially-`nil` result, an Objective-C `init` or factory
method will be imported as `init!`.
As part of this change, factory methods that have NSError**
parameters, such as `+[NSString
stringWithContentsOfFile:encoding:error:]`, will now be imported as
(failable) initializers, e.g.,
```swift
init?(contentsOfFile path: String,
encoding: NSStringEncoding,
error: NSErrorPointer)
```
* Nested classes explicitly marked `@objc` will now properly be included in a
target's generated header as long as the containing context is also
(implicitly or explicitly) `@objc`. Nested classes not explicitly marked
`@objc` will never be printed in the generated header, even if they extend an
Objective-C class.
* All of the `*LiteralConvertible` protocols, as well as
`StringInterpolationConvertible`, now use initializers for their
requirements rather than static methods starting with
`convertFrom`. For example, `IntegerLiteralConvertible` now has the
following initializer requirement:
```swift
init(integerLiteral value: IntegerLiteralType)
```
Any type that previously conformed to one of these protocols will
need to replace its `convertFromXXX` static methods with the
corresponding initializer.
## Swift 1.0
### 2014-09-15 (Xcode 6.0)
* Initializers can now fail by returning `nil`. A failable initializer is
declared with `init?` (to return an explicit optional) or `init!` (to return
an implicitly-unwrapped optional). For example, you could implement
`String.toInt` as a failable initializer of `Int` like this:
```swift
extension Int {
init?(fromString: String) {
if let i = fromString.toInt() {
// Initialize
self = i
} else {
// Discard self and return 'nil'.
return nil
}
}
}
```
The result of constructing a value using a failable initializer then becomes
optional:
```swift
if let twentytwo = Int(fromString: "22") {
println("the number is \(twentytwo)")
} else {
println("not a number")
}
```
In the current implementation, struct and enum initializers can return `nil`
at any point inside the initializer, but class initializers can only return
`nil` after all of the stored properties of the object have been initialized
and `self.init` or `super.init` has been called. If `self.init` or
`super.init` is used to delegate to a failable initializer, then the `nil`
return is implicitly propagated through the current initializer if the
called initializer fails.
* The `RawRepresentable` protocol that enums with raw types implicitly conform
to has been redefined to take advantage of failable initializers. The
`fromRaw(RawValue)` static method has been replaced with an initializer
`init?(rawValue: RawValue)`, and the `toRaw()` method has been replaced with
a `rawValue` property. Enums with raw types can now be used like this:
```swift
enum Foo: Int { case A = 0, B = 1, C = 2 }
let foo = Foo(rawValue: 2)! // formerly 'Foo.fromRaw(2)!'
println(foo.rawValue) // formerly 'foo.toRaw()'
```
### 2014-09-02
* Characters can no longer be concatenated using `+`. Use `String(c1) +
String(c2)` instead.
### 2014-08-18
* When force-casting between arrays of class or `@objc` protocol types
using `a as [C]`, type checking is now deferred until the moment
each element is accessed. Because bridging conversions from NSArray
are equivalent to force-casts from `[NSArray]`, this makes certain
Array round-trips through Objective-C code `O(1)` instead of `O(N)`.
### 2014-08-04
* `RawOptionSetType` now implements `BitwiseOperationsType`, so imported
`NS_OPTIONS` now support the bitwise assignment operators `|=`, `&=`,
and `^=`. It also no longer implements `BooleanType`; to check if an option
set is empty, compare it to `nil`.
* Types implementing `BitwiseOperationsType` now automatically support
the bitwise assignment operators `|=`, `&=`, and `^=`.
* Optionals can now be coalesced with default values using the `??` operator.
`??` is a short-circuiting operator that takes an optional on the left and
a non-optional expression on the right. If the optional has a value, its
value is returned as a non-optional; otherwise, the expression on the right
is evaluated and returned:
```swift
var sequence: [Int] = []
sequence.first ?? 0 // produces 0, because sequence.first is nil
sequence.append(22)
sequence.first ?? 0 // produces 22, the value of sequence.first
```
* The optional chaining `?` operator can now be mutated through, like `!`.
The assignment and the evaluation of the right-hand side of the operator
are conditional on the presence of the optional value:
```swift
var sequences = ["fibonacci": [1, 1, 2, 3, 4], "perfect": [6, 28, 496]]
sequences["fibonacci"]?[4]++ // Increments element 4 of key "fibonacci"
sequences["perfect"]?.append(8128) // Appends to key "perfect"
sequences["cubes"]?[3] = 3*3*3 // Does nothing; no "cubes" key
```
Note that optional chaining still flows to the right, so prefix increment
operators are *not* included in the chain, so this won't type-check:
```swift
++sequences["fibonacci"]?[4] // Won't type check, can't '++' Int?
```
### 2014-07-28
* The swift command line interface is now divided into an interactive driver
`swift`, and a batch compiler `swiftc`:
```
swift [options] input-file [program-arguments]
Runs the script 'input-file' immediately, passing any program-arguments
to the script. Without any input files, invokes the repl.
swiftc [options] input-filenames
The familiar swift compiler interface: compiles the input-files according
to the mode options like -emit-object, -emit-executable, etc.
```
* For greater clarity and explicitness when bypassing the type system,
`reinterpretCast` has been renamed `unsafeBitCast`, and it has acquired
a (required) explicit type parameter. So
```swift
let x: T = reinterpretCast(y)
```
becomes
```swift
let x = unsafeBitCast(y, T.self)
```
* Because their semantics were unclear, the methods `asUnsigned` (on
the signed integer types) and `asSigned` (on the unsigned integer
types) have been replaced. The new idiom is explicit construction
of the target type using the `bitPattern:` argument label. So,
```swift
myInt.asUnsigned()
```
has become
```swift
UInt(bitPattern: myInt)
```
* To better follow Cocoa naming conventions and to encourage
immutability, The following pointer types were renamed:
| Old Name | New Name |
|---------------------------------|----------------------------------------|
| `UnsafePointer<T>` | `UnsafeMutablePointer<T>` |
| `ConstUnsafePointer<T>` | `UnsafePointer<T>` |
| `AutoreleasingUnsafePointer<T>` | `AutoreleasingUnsafeMutablePointer<T>` |
Note that the meaning of `UnsafePointer` has changed from mutable to
immutable. As a result, some of your code may fail to compile when
assigning to an `UnsafePointer.memory` property. The fix is to
change your `UnsafePointer<T>` into an `UnsafeMutablePointer<T>`.
* The optional unwrapping operator `x!` can now be assigned through, and
mutating methods and operators can be applied through it:
```swift
var x: Int! = 0
x! = 2
x!++
// Nested dictionaries can now be mutated directly:
var sequences = ["fibonacci": [1, 1, 2, 3, 0]]
sequences["fibonacci"]![4] = 5
sequences["fibonacci"]!.append(8)
```
* The `@auto_closure` attribute has been renamed to `@autoclosure`.
* There is a new `dynamic` declaration modifier. When applied to a method,
property, subscript, or initializer, it guarantees that references to the
declaration are always dynamically dispatched and never inlined or
devirtualized, and that the method binding can be reliably changed at runtime.
The implementation currently relies on the Objective-C runtime, so `dynamic`
can only be applied to `@objc-compatible` declarations for now. `@objc` now
only makes a declaration visible to Objective-C; the compiler may now use
vtable lookup or direct access to access (non-dynamic) `@objc` declarations.
```swift
class Foo {
// Always accessed by objc_msgSend
dynamic var x: Int
// Accessed by objc_msgSend from ObjC; may be accessed by vtable
// or by static reference in Swift
@objc var y: Int
// Not exposed to ObjC (unless Foo inherits NSObject)
var z: Int
}
```
`dynamic` enables KVO, proxying, and other advanced Cocoa features to work
reliably with Swift declarations.
* Clang submodules can now be imported:
```swift
import UIKit.UIGestureRecognizerSubclass
```
* The numeric optimization levels `-O[0-3]` have been removed in favor of the
named levels `-Onone` and `-O`.
* The `-Ofast` optimization flag has been renamed to `-Ounchecked`. We will accept
both names for now and remove `-Ofast` in a later build.
* An initializer that overrides a designated initializer from its
superclass must be marked with the `override` keyword, so that all
overrides in the language consistently require the use of
`override`. For example:
```swift
class A {
init() { }
}
class B : A {
override init() { super.init() }
}
```
* Required initializers are now more prominent in several ways. First,
a (non-final) class that conforms to a protocol that contains an
initializer requirement must provide a required initializer to
satisfy that requirement. This ensures that subclasses will also
conform to the protocol, and will be most visible with classes that
conform to `NSCoding`:
```swift
class MyClass : NSObject, NSCoding {
required init(coder aDecoder: NSCoder!) { /*... */ }
func encodeWithCoder(aCoder: NSCoder!) { /* ... */ }
}
```
Second, because `required` places a significant requirement on all
subclasses, the `required` keyword must be placed on overrides of a
required initializer:
```swift
class MySubClass : MyClass {
var title: String = "Untitled"
required init(coder aDecoder: NSCoder!) { /*... */ }
override func encodeWithCoder(aCoder: NSCoder!) { /* ... */ }
}
```
Finally, required initializers can now be inherited like any other
initializer:
```swift
class MySimpleSubClass : MyClass { } // inherits the required init(coder:).
```
### 2014-07-21
* Access control has been implemented.
- `public` declarations can be accessed from any module.
- `internal` declarations (the default) can be accessed from within the
current module.
- `private` declarations can be accessed only from within the current file.
There are still details to iron out here, but the model is in place.
The general principle is that an entity cannot be defined in terms of another
entity with less accessibility.
Along with this, the generated header for a framework will only include
public declarations. Generated headers for applications will include public
and internal declarations.
* `CGFloat` is now a distinct floating-point type that wraps either a
`Float` (on 32-bit architectures) or a `Double` (on 64-bit
architectures). It provides all of the same comparison and
arithmetic operations of Float and Double, and can be created using
numeric literals.
* The immediate mode `swift -i` now works for writing `#!` scripts that take
command line arguments. The `-i` option to the swift driver must now come at
the end of the compiler arguments, directly before the input filename. Any
arguments that come after `-i` and the input filename are treated as arguments
to the interpreted file and forwarded to `Process.arguments`.
* Type inference for `for..in` loops has been improved to consider the
sequence along with the element pattern. For example, this accepts
the following loops that were previously rejected:
```swift
for i: Int8 in 0..<10 { }
for i: Float in 0.0...10.0 { }
```
* Introduced the new `BooleanLiteralConvertible` protocol, which allows
user-defined types to support Boolean literals. `true` and `false`
are now `Boolean` constants and keywords.
* The `@final`, `@lazy`, `@required` and `@optional` attributes are now
considered to be declaration modifiers - they no longer require (or allow) an
`@` sign.
* The `@prefix`, `@infix`, and `@postfix` attributes have been changed to
declaration modifiers, so they are no longer spelled with an `@` sign.
Operator declarations have been rearranged from `operator prefix +` to
`prefix operator +` for consistency.
### 2014-07-03
* C function pointer types are now imported as `CFunctionPointer<T>`, where `T`
is a Swift function type. `CFunctionPointer` and `COpaquePointer` can be
explicitly constructed from one another, but they do not freely convert, nor
is `CFunctionPointer` compatible with Swift closures.
Example: `int (*)(void)` becomes `CFunctionPointer<(Int) -> Void>`.
* The interop model for pointers in C APIs has been simplified. Most code that
calls C functions by passing arrays, UnsafePointers, or the addresses of
variables with `&x` does not need to change. However, the `CConstPointer` and
`CMutablePointer` bridging types have been removed, and functions and methods
are now imported as and overridden by taking UnsafePointer and
`ConstUnsafePointer` directly. `Void` pointers are now imported as
`(Const)UnsafePointer<Void>`; `COpaquePointer` is only imported for opaque
types now.
* `Array` types are now spelled with the brackets surrounding the
element type. For example, an array of `Int` is written as:
```swift
var array: [Int]
```
* `Dictionary` types can now be spelled with the syntax `[K : V]`, where `K`
is the key type and `V` is the value type. For example:
```swift
var dict: [String : Int] = ["Hello" : 1, "World" : 2]
```
The type `[K : V]` is syntactic sugar for `Dictionary<K, V>`; nothing
else has changed.
* The `@IBOutlet` attribute no longer implicitly (and invisibly) changes the type
of the declaration it is attached to. It no longer implicitly makes variables
be an implicitly unwrapped optional and no longer defaults them to weak.
* The `\x`, `\u` and `\U` escape sequences in string literals have been
consolidated into a single and less error prone `\u{123456}` syntax.
### 2014-06-23
* The half-open range operator has been renamed from `..` to `..<` to reduce
confusion. The `..<` operator is precedented in Groovy (among other languages)
and makes it much more clear that it doesn't include the endpoint.
* Class objects such as `NSObject.self` can now be converted to `AnyObject` and
used as object values.
* Objective-C protocol objects such as `NSCopying.self` can now be used as
instances of the `Protocol` class, such as in APIs such as XPC.
* Arrays now have full value semantics: both assignment and
initialization create a logically-distinct object
* The `sort` function and array method modify the target in-place. A
new `sorted` function and array method are non-mutating, creating
and returning a new collection.
### 2014-05-19
* `sort`, `map`, `filter`, and `reduce` methods on `Array`s accept trailing
closures:
```swift
let a = [5, 6, 1, 3, 9]
a.sort{ $0 > $1 }
println(a) // [9, 6, 5, 3, 1]
println(a.map{ $0 * 2 }) // [18, 12, 10, 6, 2]
println(a.map{ $0 * 2 }.filter{ $0 < 10}) // [6, 2]
println(a.reduce(1000){ $0 + $1 }) // 1024 (no kidding)
```
* A lazy `map()` function in the standard library works on any `Sequence`.
Example:
```swift
class X {
var value: Int
init(_ value: Int) {
self.value = value
println("created X(\(value))")
}
}
// logically, this sequence is X(0), X(1), X(2), ... X(50)
let lazyXs = map(0..50){ X($0) }
// Prints "created X(...)" 4 times
for x in lazyXs {
if x.value == 4 {
break
}
}
```
* There's a similar lazy `filter()` function:
```swift
// 0, 10, 20, 30, 40
let tens = filter(0..50) { $0 % 10 == 0 }
let tenX = map(tens){ X($0) } // 5 lazy Xs
let tenXarray = Array(tenX) // Actually creates those Xs
```
* Weak pointers of classbound protocol type work now.
* `IBOutlets` now default to weak pointers with implicit optional type (`T!`).
* `NSArray*` parameters and result types of Objective-C APIs are now
imported as `AnyObject[]!`, i.e., an implicitly unwrapped optional
array storing `AnyObject` values. For example, `NSView`'s constraints
property
```objc
@property (readonly) NSArray *constraints;
```
is now imported as
```swift
var constraints: AnyObject[]!
```
Note that one can implicitly convert between an `AnyObject[]` and an
`NSArray` (in both directions), so (for example) one can still
explicitly use `NSArray` if desired:
```swift
var array: NSArray = view.constraints
```
Swift arrays bridge to `NSArray` similarly to the way Swift
strings bridge to `NSString`.
* `ObjCMutablePointer` has been renamed `AutoreleasingUnsafePointer`.
* `UnsafePointer` (and `AutoreleasingUnsafePointer`)'s `set()` and `get()`
have been replaced with a property called `memory`.
- Previously you would write:
```swift
val = p.get()
p.set(val)
```
- Now you write:
```swift
val = p.memory
p.memory = val
```
* Removed shorthand `x as T!`; instead use `(x as T)!`
- `x as T!` now means "x as implicitly unwrapped optional".
* Range operators `..` and `...` have been switched.
- `1..3` now means 1,2
- `1...3` now means 1,2,3
* The pound sign (`#`) is now used instead of the back-tick (\`) to mark
an argument name as a keyword argument, e.g.,
```swift
func moveTo(#x: Int, #y: Int) { ... }
moveTo(x: 5, y: 7)
```
* Objective-C factory methods are now imported as initializers. For
example, `NSColor`'s `+colorWithRed:green:blue:alpha` becomes
```swift
init(red: CGFloat, green: CGFloat, blue: CGFloat, alpha: CGFloat)
```
which allows an `NSColor` to be created as, e.g.,
```swift
NSColor(red: 0.5, green: 0.25, blue: 0.25, alpha: 0.5)
```
Factory methods are identified by their kind (class methods), name
(starts with words that match the words that end the class name),
and result type (`instancetype` or the class type).
* Objective-C properties of some `CF` type are no longer imported as `Unmanaged`.
* REPL mode now uses LLDB, for a greatly-expanded set of features. The colon
prefix now treats the rest of the line as a command for LLDB, and entering
a single colon will drop you into the debugging command prompt. Most
importantly, crashes in the REPL will now drop you into debugging mode to
see what went wrong.
If you do have a need for the previous REPL, pass `-integrated-repl`.
* In a UIKit-based application, you can now eliminate your 'main.swift' file
and instead apply the `@UIApplicationMain` attribute to your
`UIApplicationDelegate` class. This will cause the `main` entry point to the
application to be automatically generated as follows:
```swift
UIApplicationMain(argc, argv, nil,
NSStringFromClass(YourApplicationDelegate.self))
```
If you need nontrivial logic in your application entry point, you can still
write out a `main.swift`. Note that `@UIApplicationMain` and `main.swift` are
mutually exclusive.
### 2014-05-13
* weak pointers now work with implicitly unchecked optionals, enabling usecases
where you don't want to `!` every use of a weak pointer. For example:
```swift
weak var myView : NSView!
```
of course, they still work with explicitly checked optionals like `NSView?`
* Dictionary subscripting now takes/returns an optional type. This allows
querying a dictionary via subscripting to gracefully fail. It also enables
the idiom of removing values from a dictionary using `dict[key] = nil`.
As part of this, `deleteKey` is no longer available.
* Stored properties may now be marked with the `@lazy` attribute, which causes
their initializer to be evaluated the first time the property is touched
instead of when the enclosing type is initialized. For example:
```swift
func myInitializer() -> Int { println("hello\n"); return 42 }
class MyClass {
@lazy var aProperty = myInitializer()
}
var c = MyClass() // doesn't print hello
var tmp = c.aProperty // prints hello on first access
tmp = c.aProperty // doesn't print on subsequent loads.
c = MyClass() // doesn't print hello
c.aProperty = 57 // overwriting the value prevents it from ever running
```
Because lazy properties inherently rely on mutation of the property, they
cannot be `let`s. They are currently also limited to being members of structs
and classes (they aren't allowed as local or global variables yet) and cannot
be observed with `willSet`/`didSet` yet.
* Closures can now specify a capture list to indicate with what strength they
want to capture a value, and to bind a particular field value if they want to.
Closure capture lists are square-bracket delimited and specified before the
(optional) argument list in a closure. Each entry may be specified as `weak`
or `unowned` to capture the value with a weak or unowned pointer, and may
contain an explicit expression if desired. Some examples:
```swift
takeClosure { print(self.title) } // strong capture
takeClosure { [weak self] in print(self!.title) } // weak capture
takeClosure { [unowned self] in print(self.title) } // unowned capture
```
You can also bind arbitrary expression to named values in the capture list.
The expression is evaluated when the closure is formed, and captured with the
specified strength. For example:
```swift
// weak capture of "self.parent"
takeClosure { [weak tmp = self.parent] in print(tmp!.title) }
```
The full form of a closure can take a signature (an argument list and
optionally a return type) if needed. To use either the capture list or the
signature, you must specify the context sensitive `in` keyword. Here is a
(weird because there is no need for `unowned`) example of a closure with both:
```swift
myNSSet.enumerateObjectsUsingBlock { [unowned self] (obj, stop) in
self.considerWorkingWith(obj)
}
```
* The word `with` is now removed from the first keyword argument name
if an initialized imported from Objective-C. For example, instead of
building `UIColor` as:
```swift
UIColor(withRed: r, green: g, blue: b, alpha: a)
```
it will now be:
```swift
UIColor(red: r, green: g, blue: b, alpha: a)
```
* `Dictionary` can be bridged to `NSDictionary` and vice versa:
- `NSDictionary` has an implicit conversion to `Dictionary<NSObject,
AnyObject>`. It bridges in O(1), without memory allocation.
- `Dictionary<K, V>` has an implicit conversion to `NSDictionary`.
`Dictionary<K, V>` bridges to `NSDictionary` iff both `K` and `V` are
bridged. Otherwise, a runtime error is raised.
Depending on `K` and `V` the operation can be `O(1)` without memory
allocation, or `O(N)` with memory allocation.
* Single-quoted literals are no longer recognized. Use double-quoted literals
and an explicit type annotation to define `Characters` and `UnicodeScalars`:
```swift
var ch: Character = "a"
var us: UnicodeScalar = "a"
```
### 2014-05-09
* The use of keyword arguments is now strictly enforced at the call
site. For example, consider this method along with a call to it:
```swift
class MyColor {
func mixColorWithRed(red: Float, green: Float, blue: Float) { /* ... */ }
}
func mix(color: MyColor, r: Float, g: Float, b: Float) {
color.mixColorWithRed(r, g, b)
}
```
The compiler will now complain about the missing `green:` and
`blue:` labels, with a Fix-It to correct the code:
```
color.swift:6:24: error: missing argument labels 'green:blue:' in call
color.mixColorWithRed(r, g, b)
^
green: blue:
```
The compiler handles missing, extraneous, and incorrectly-typed
argument labels in the same manner. Recall that one can make a
parameter a keyword argument with the back-tick or remove a keyword
argument with the underscore.
```swift
class MyColor {
func mixColor(`red: Float, green: Float, blue: Float) { /* ... */ }
func mixColorGuess(red: Float, _ green: Float, _ blue: Float) { /* ... */ }
}
func mix(color: MyColor, r: Float, g: Float, b: Float) {
color.mixColor(red: r, green: g, blue: b) // okay: all keyword arguments
color.mixColorGuess(r, g, b) // okay: no keyword arguments
}
```
Arguments cannot be re-ordered unless the corresponding parameters
have default arguments. For example, given:
```swift
func printNumber(`number: Int, radix: Int = 10, separator: String = ",") { }
```
The following three calls are acceptable because only the arguments for
defaulted parameters are re-ordered relative to each other:
```swift
printNumber(number: 256, radix: 16, separator: "_")
printNumber(number: 256, separator: "_")
printNumber(number: 256, separator: ",", radix: 16)
```
However, this call:
```swift
printNumber(separator: ",", radix: 16, number: 256)
```
results in an error due to the re-ordering:
```
printnum.swift:7:40: error: argument 'number' must precede argument 'separator'
printNumber(separator: ",", radix: 16, number: 256)
~~~~~~~~~~~~~~ ^ ~~~
```
* `;` can no longer be used to demarcate an empty case in a switch statement,
use `break` instead.
### 2014-05-07
* The compiler's ability to diagnose many common kinds of type check errors has
improved. (`expression does not type-check` has been retired.)
* Ranges can be formed with floating point numbers, e.g. `0.0 .. 100.0`.
* Convenience initializers are now spelled as `convenience init` instead of with
the `-> Self` syntax. For example:
```swift
class Foo {
init(x : Int) {} // designated initializer
convenience init() { self.init(42) } // convenience initializer
}
```
You still cannot declare designated initializers in extensions, only
convenience initializers are allowed.
* Reference types using the CoreFoundation runtime are now imported as
class types. This means that Swift will automatically manage the
lifetime of a `CFStringRef` the same way that it manages the lifetime
of an `NSString`.
In many common cases, this will just work. Unfortunately, values
are returned from `CF`-style APIs in a wide variety of ways, and
unlike Objective-C methods, there simply isn't enough consistency
for Swift to be able to safely apply the documented conventions
universally. The framework teams have already audited many of the
most important `CF`-style APIs, and those APIs should be imported
without a hitch into Swift. For all the APIs which haven't yet
been audited, we must import return types using the `Unmanaged` type.
This type allows the programmer to control exactly how the object
is passed.
For example:
```swift
// CFBundleGetAllBundles() returns an Unmanaged<CFArrayRef>.
// From the documentation, we know that it returns a +0 value.
let bundles = CFBundleGetAllBundles().takeUnretainedValue()
// CFRunLoopCopyAllModes() returns an Unmanaged<CFArrayRef>.
// From the documentation, we know that it returns a +1 value.
let modes = CFRunLoopCopyAllModes(CFRunLoopGetMain()).takeRetainedValue()
```
You can also use `Unmanaged` types to pass and return objects
indirectly, as well as to generate unbalanced retains and releases
if you really require them.
The API of the Unmanaged type is still in flux, and your feedback
would be greatly appreciated.
### 2014-05-03
* The `@NSManaged` attribute can be applied to the properties of an
`NSManagedObject` subclass to indicate that they should be handled by
CoreData:
```swift
class Employee : NSManagedObject {
@NSManaged var name: String
@NSManaged var department: Department
}
```
* The `@weak` and `@unowned` attributes have become context sensitive keywords
instead of attributes. To declare a `weak` or `unowned` pointer, use:
```swift
weak var someOtherWindow : NSWindow?
unowned var someWindow : NSWindow
```
... with no `@` on the `weak`/`unowned`.
### 2014-04-30
* Swift now supports a `#elseif` form for build configurations, e.g.:
```swift
#if os(OSX)
typealias SKColor = NSColor
#elseif os(iOS)
typealias SKColor = UIColor
#else
typealias SKColor = Green
#endif
```
* You can now use the `true` and `false` constants in build configurations,
allowing you to emulate the C idioms of `#if 0` (but spelled `#if false`).
* `break` now breaks out of switch statements.
* It is no longer possible to specify `@mutating` as an attribute, you may only
use it as a keyword, e.g.:
```swift
struct Pair {
var x, y : Int
mutating func nuke() { x = 0; y = 0 }
}
```
The former `@!mutating` syntax used to mark setters as non-mutating is now
spelled with the `nonmutating` keyword. Both mutating and nonmutating are
context sensitive keywords.
* `NSLog` is now available from Swift code.
* The parser now correctly handles expressions like `var x = Int[]()` to
create an empty array of integers. Previously you'd have to use syntax like
`Array<Int>()` to get this. Now that this is all working, please prefer to
use `Int[]` consistently instead of `Array<Int>`.
* `Character` is the new character literal type:
```swift
var x = 'a' // Infers 'Character' type
```
You can force inference of `UnicodeScalar` like this:
```swift
var scalar: UnicodeScalar = 'a'
```
`Character` type represents a Unicode extended grapheme cluster (to put it
simply, a grapheme cluster is what users think of as a character: a base plus
any combining marks, or other cases explained in
[Unicode Standard Annex #29](http://unicode.org/reports/tr29/)).
### 2014-04-22
* Loops and switch statements can now carry labels, and you can
`break`/`continue` to those labels. These use conventional C-style label
syntax, and should be dedented relative to the code they are in. An example:
```swift
func breakContinue(x : Int) -> Int {
Outer:
for a in 0..1000 {
Switch:
switch x {
case 42: break Outer
case 97: continue Outer
case 102: break Switch
case 13: continue // continue always works on loops.
case 139: break // break will break out of the switch (but see below)
}
}
}
```
* We are changing the behavior of `break` to provide C-style semantics, to allow
breaking out of a switch statement. Previously, break completely ignored
switches so that it would break out of the nearest loop. In the example above,
`case 139` would break out of the `Outer` loop, not the `Switch`.
In order to avoid breaking existing code, we're making this a compile time
error instead of a silent behavior change. If you need a solution for the
previous behavior, use labeled break.
This error will be removed in a week or two.
* Cocoa methods and properties that are annotated with the
`NS_RETURNS_INNER_POINTER` attribute, including `-[NSData bytes]` and
`-[{NS,UI}Color CGColor]`, are now safe to use and follow the same lifetime
extension semantics as ARC.
### 2014-04-18
* Enabling/disabling of asserts
```swift
assert(condition, msg)
```
is enabled/disabled dependent on the optimization level. In debug mode at
`-O0` asserts are enabled. At higher optimization levels asserts are disabled
and no code is generated for them. However, asserts are always type checked
even at higher optimization levels.
Alternatively, assertions can be disabled/enabled by using the frontend flag
`-assert-config Debug`, or `-assert-config Release`.
* Added optimization flag `-Ofast`. It disables all assertions (`assert`), and
runtime overflow and type checks.
* The "selector-style" function and initializer declaration syntax is
being phased out. For example, this:
```
init withRed(red: CGFloat) green(CGFloat) blue(CGFloat) alpha(CGFloat)
```
will now be written as:
```swift
init(withRed red: CGFloat, green: CGFloat, blue: CGFloat, alpha: CGFloat)
```
For each parameter, one can have both an argument API name (i.e.,
`withRed`, which comes first and is used at the call site) and an
internal parameter name that follows it (i.e. `red`, which comes
second and is used in the implementation). When the two names are
the same, one can simply write the name once and it will be used for
both roles (as with `green`, `blue`, and `alpha` above). The
underscore (`_`) can be used to mean "no name", as when the
following function/method:
```
func murderInRoom(room:String) withWeapon(weapon: String)
```
is translated to:
```swift
func murderInRoom(_ room: String, withWeapon weapon: String)
```
The compiler now complains when it sees the selector-style syntax
and will provide Fix-Its to rewrite to the newer syntax.
Note that the final form of selector syntax is still being hammered
out, but only having one declaration syntax, which will be very
close to this, is a known.
* Stored properties can now be marked with the `@NSCopying` attribute, which
causes their setter to be synthesized with a copy to `copyWithZone:`. This may
only be used with types that conform to the `NSCopying` protocol, or option
types thereof. For example:
```swift
@NSCopying var myURL : NSURL
```
This fills the same niche as the (`copy`) attribute on Objective-C properties.
### 2014-04-16
* Optional variables and properties are now default-initialized to `nil`:
```swift
class MyClass {
var cachedTitle: String? // "= nil" is implied
}
```
* `@IBOutlet` has been improved in a few ways:
- `IBOutlets` can now be `@unchecked` optional.
- An `IBOutlet` declared as non-optional, i.e.,
```swift
@IBOutlet var button: NSButton
```
will be treated as an `@unchecked` optional. This is considered to
be the best practice way to write an outlet, unless you want to explicitly
handle the null case - in which case, use `NSButton?` as the type. Either
way, the `= nil` that was formerly required is now implicit.
* The precedence of `is` and `as` is now higher than comparisons, allowing the
following sorts of things to be written without parens:
```swift
if x is NSButton && y is NSButtonCell { ... }
if 3/4 as Float == 6/8 as Float { ... }
```
* Objective-C blocks are now transparently bridged to Swift closures. You never
have to write `@objc_block` when writing Objective-C-compatible methods anymore.
Block parameters are now imported as unchecked optional closure types,
allowing `nil` to be passed.
### 2014-04-09
* `Dictionary` changes:
- `Elements` are now tuples, so you can write
```swift
for (k, v) in d {
// ...
}
```
- `keys` and `values` properties, which are `Collections` projecting
the corresponding aspect of each element. `Dictionary` indices are
usable with their `keys` and `values` properties, so:
```swift
for i in indices(d) {
let (k, v) = d[i]
assert(k == d.keys[i])
assert(v == d.values[i])
}
```
* Semicolon can be used as a single no-op statement in otherwise empty cases in
`switch` statements:
```swift
switch x {
case 1, 2, 3:
print("x is 1, 2 or 3")
default:
;
}
```
* `override` is now a context sensitive keyword, instead of an attribute:
```swift
class Base {
var property: Int { return 0 }
func instanceFunc() {}
class func classFunc() {}
}
class Derived : Base {
override var property: Int { return 1 }
override func instanceFunc() {}
override class func classFunc() {}
}
```
### 2014-04-02
* Prefix splitting for imported enums has been revised again due to feedback:
- If stripping off a prefix would leave an invalid identifier (like `10_4`),
leave one more word in the result than would otherwise be there
(`Behavior10_4`).
- If all enumerators have a `k` prefix (for `constant`) and the enum doesn't,
the `k` should not be considered when finding the common prefix.
- If the enum name is a plural (like `NSSomethingOptions`) and the enumerator
names use the singular form (`NSSomethingOptionMagic`), this is considered
a matching prefix (but only if nothing follows the plural).
* Cocoa APIs that take pointers to plain C types as arguments now get imported
as taking the new `CMutablePointer<T>` and `CConstPointer<T>` types instead
of `UnsafePointer<T>`. These new types allow implicit conversions from
Swift `inout` parameters and from Swift arrays:
```swift
let rgb = CGColorSpaceCreateDeviceRGB()
// CGColorRef CGColorCreate(CGColorSpaceRef, const CGFloat*);
let white = CGColorCreate(rgb, [1.0, 1.0, 1.0])
var s = 0.0, c = 0.0
// void sincos(double, double*, double*);
sincos(M_PI/2, &s, &c)
```
Pointers to pointers to ObjC classes, such as `NSError**`, get imported as
`ObjCMutablePointer<NSError?>`. This type doesn't work with arrays, but
accepts inouts or `nil`:
```swift
var error: NSError?
let words = NSString.stringWithContentsOfFile("/usr/share/dict/words",
encoding: .UTF8StringEncoding,
error: &error)
```
`Void` pointer parameters can be passed an array or inout of any type:
```swift
// + (NSData*)dataWithBytes:(const void*)bytes length:(NSUInteger)length;
let data = NSData.dataWithBytes([1.5, 2.25, 3.125],
length: sizeof(Double.self) * 3)
var fromData = [0.0, 0.0, 0.0]
// - (void)getBytes:(void*)bytes length:(NSUInteger)length;
data.getBytes(&fromData, length: sizeof(Double.self) * 3)
```
Note that we don't know whether an API reads or writes the C pointer, so
you need to explicitly initialize values (like `s` and `c` above) even if
you know that the API overwrites them.
This pointer bridging only applies to arguments, and only works with well-
behaved C and ObjC APIs that don't keep the pointers they receive as
arguments around or do other dirty pointer tricks. Nonstandard use of pointer
arguments still requires `UnsafePointer`.
* Objective-C pointer types now get imported by default as the `@unchecked T?`
optional type. Swift class types no longer implicitly include `nil`.
A value of `@unchecked T?` can be implicitly used as a value of `T`.
Swift will implicitly cause a reliable failure if the value is `nil`,
rather than introducing undefined behavior (as in Objective-C ivar
accesses or everything in C/C++) or silently ignoring the operation
(as in Objective-C message sends).
A value of `@unchecked T?` can also be implicitly used as a value of `T?`,
allowing you explicitly handle the case of a `nil` value. For example,
if you would like to just silently ignore a message send a la Objective-C,
you can use the postfix `?` operator like so:
```swift
fieldsForKeys[kHeroFieldKey]?.setEditable(true)
```
This design allows you to isolate and handle `nil` values in Swift code
without requiring excessive "bookkeeping" boilerplate to use values that
you expect to be non-`nil`.
For now, we will continue to import C pointers as non-optional
`UnsafePointer` and `C*Pointer` types; that will be evaluated separately.
We intend to provide attributes for Clang to allow APIs to opt in to
importing specific parameters, return types, etc. as either the
explicit optional type `T?` or the simple non-optional type `T`.
* The "separated" call syntax, i.e.,
```
NSColor.colorWithRed(r) green(g) blue(b) alpha(a)
UIColor.init withRed(r) green(g) blue(b) alpha(a)
```
is being removed. The compiler will now produce an error and provide
Fix-Its to rewrite calls to the "keyword-argument" syntax:
```swift
NSColor.colorWithRed(r, green: g, blue: b, alpha: a)
UIColor(withRed: r, green:g, blue:b, alpha: a)
```
* The `objc` attribute now optionally accepts a name, which can be
used to provide the name for an entity as seen in Objective-C. For
example:
```swift
class MyType {
var enabled: Bool {
@objc(isEnabled) get {
// ...
}
}
}
```
The `@objc` attribute can be used to name initializers, methods,
getters, setters, classes, and protocols.
* Methods, properties and subscripts in classes can now be marked with the
`@final` attribute. This attribute prevents overriding the declaration in any
subclass, and provides better performance (since dynamic dispatch is avoided
in many cases).
### 2014-03-26
* Attributes on declarations are no longer comma separated.
Old syntax:
```
@_silgen_name("foo"), @objc func bar() {}
```
New syntax:
```swift
@_silgen_name("foo") @objc
```
The `,` was vestigial when the attribute syntax consisted of bracket lists.
* `switch` now always requires a statement after a `case` or `default`.
Old syntax:
```swift
switch x {
case .A:
case .B(1):
println(".A or .B(1)")
default:
// Ignore it.
}
```
New syntax:
```swift
switch x {
case .A, .B(1):
println(".A or .B(1)")
default:
() // Ignore it.
}
```
The following syntax can be used to introduce guard expressions for patterns
inside the `case`:
```swift
switch x {
case .A where isFoo(),
.B(1) where isBar():
...
}
```
* Observing properties can now `@override` properties in a base class, so you
can observe changes that happen to them.
```swift
class MyAwesomeView : SomeBasicView {
@override
var enabled : Bool {
didSet {
println("Something changed")
}
}
...
}
```
Observing properties still invoke the base class getter/setter (or storage)
when accessed.
* An `as` cast can now be forced using the postfix `!` operator without using
parens:
```swift
class B {}
class D {}
let b: B = D()
// Before
let d1: D = (b as D)!
// After
let d2: D = b as D!
```
Casts can also be chained without parens:
```swift
// Before
let b2: B = (((D() as B) as D)!) as B
// After
let b3: B = D() as B as D! as B
```
* `as` can now be used in `switch` cases to match the result of a checked cast:
```swift
func printHand(hand: Any) {
switch hand {
case 1 as Int:
print("ace")
case 11 as Int:
print("jack")
case 12 as Int:
print("queen")
case 13 as Int:
print("king")
case let numberCard as Int:
print("\(numberCard)")
case let (a, b) as (Int, Int) where a == b:
print("two ")
printHand(a)
print("s")
case let (a, b) as (Int, Int):
printHand(a)
print(" and a ")
printHand(b)
case let (a, b, c) as (Int, Int, Int) where a == b && b == c:
print("three ")
printHand(a)
print("s")
case let (a, b, c) as (Int, Int, Int):
printHand(a)
print(", ")
printHand(b)
print(", and a ")
printHand(c)
default:
print("unknown hand")
}
}
printHand(1, 1, 1) // prints "three aces"
printHand(12, 13) // prints "queen and a king"
```
* Enums and option sets imported from C/Objective-C still strip common
prefixes, but the name of the enum itself is now taken into consideration as
well. This keeps us from dropping important parts of a name that happen to be
shared by all members.
```objc
// NSFileManager.h
typedef NS_OPTIONS(NSUInteger, NSDirectoryEnumerationOptions) {
NSDirectoryEnumerationSkipsSubdirectoryDescendants = 1UL << 0,
NSDirectoryEnumerationSkipsPackageDescendants = 1UL << 1,
NSDirectoryEnumerationSkipsHiddenFiles = 1UL << 2
} NS_ENUM_AVAILABLE(10_6, 4_0);
```
```swift
// Swift
let opts: NSDirectoryEnumerationOptions = .SkipsPackageDescendants
```
* `init` methods in Objective-C protocols are now imported as
initializers. To conform to `NSCoding`, you will now need to provide
```swift
init withCoder(aDecoder: NSCoder) { ... }
```
rather than
```swift
func initWithCoder(aDecoder: NSCoder) { ... }
```
### 2014-03-19
* When a class provides no initializers of its own but has default
values for all of its stored properties, it will automatically
inherit all of the initializers of its superclass. For example:
```swift
class Document {
var title: String
init() -> Self {
self.init(withTitle: "Default title")
}
init withTitle(title: String) {
self.title = title
}
}
class VersionedDocument : Document {
var version = 0
// inherits 'init' and 'init withTitle:' from Document
}
```
When one does provide a designated initializer in a subclass, as in
the following example:
```swift
class SecureDocument : Document {
var key: CryptoKey
init withKey(key: CryptoKey) -> Self {
self.init(withKey: key, title: "Default title")
}
init withKey(key: CryptoKey) title(String) {
self.key = key
super.init(withTitle: title)
}
}
```
the compiler emits Objective-C method stubs for all of the
designated initializers of the parent class that will abort at
runtime if called, and which indicate which initializer needs to be
implemented. This provides memory safety for cases where an
Objective-C initializer (such as `-[Document init]` in this example)
appears to be inherited, but isn't actually implemented.
* `nil` may now be used as a Selector value. This allows calls to Cocoa methods
that accept `nil` selectors.
* `[]` and `[:]` can now be used as the empty array and dictionary literal,
respectively. Because these carry no information about their element types,
they may only be used in a context that provides this information through type
inference (e.g. when passing a function argument).
* Properties defined in classes are now dynamically dispatched and can be
overridden with `@override`. Currently `@override` only works with computed properties
overriding other computed properties, but this will be enhanced in coming weeks.
### 2014-03-12
* The `didSet` accessor of an observing property now gets passed in the old value,
so you can easily implement an action for when a property changes value. For
example:
```swift
class MyAwesomeView : UIView {
var enabled : Bool = false {
didSet(oldValue):
if oldValue != enabled {
self.needsDisplay = true
}
}
...
}
```
* The implicit argument name for set and willSet property specifiers has been
renamed from `(value)` to `(newValue)`. For example:
```swift
var i : Int {
get {
return 42
}
set { // defaults to (newValue) instead of (value)
print(newValue)
}
}
```
* The magic identifier `__FUNCTION__` can now be used to get the name of the
current function as a string. Like `__FILE__` and `__LINE__`, if
`__FUNCTION__` is used as a default argument, the function name of the caller
is passed as the argument.
```swift
func malkovich() {
println(__FUNCTION__)
}
malkovich() // prints "malkovich"
func nameCaller(name: String = __FUNCTION__) -> String {
return name
}
func foo() {
println(nameCaller()) // prints "foo"
}
func foo(x: Int) bar(y: Int) {
println(nameCaller()) // prints "foo:bar:"
}
```
At top level, `__FUNCTION__` gives the module name:
```swift
println(nameCaller()) // prints your module name
```
* Selector-style methods can now be referenced without applying arguments
using member syntax `foo.bar:bas:`, for instance, to test for the availability
of an optional protocol method:
```swift
func getFrameOfObjectValueForColumn(ds: NSTableViewDataSource,
tableView: NSTableView,
column: NSTableColumn,
row: Int) -> AnyObject? {
if let getObjectValue = ds.tableView:objectValueForTableColumn:row: {
return getObjectValue(tableView, column, row)
}
return nil
}
```
* The compiler now warns about cases where a variable is inferred to have
`AnyObject`, `AnyClass`, or `()` type, since type inference can turn a simple
mistake (e.g. failing to cast an `AnyObject` when you meant to) into something
with ripple effects. Here is a simple example:
```
t.swift:4:5: warning: variable 'fn' inferred to have type '()', which may be unexpected
var fn = abort()
^
t.swift:4:5: note: add an explicit type annotation to silence this warning
var fn = abort()
^
: ()
```
If you actually did intend to declare a variable of one of these types, you
can silence this warning by adding an explicit type (indicated by the Fixit).
See **rdar://15263687 and rdar://16252090** for more rationale.
* `x.type` has been renamed to `x.dynamicType`, and you can use `type` as a
regular identifier again.
### 2014-03-05
* C macros that expand to a single constant string are now imported as global
constants. Normal string literals are imported as `CString`; `NSString` literals
are imported as `String`.
* All values now have a `self` property, exactly equivalent to the value
itself:
```swift
let x = 0
let x2 = x.self
```
Types also have a `self` property that is the type object for that
type:
```swift
let theClass = NSObject.self
let theObj = theClass()
```
References to type names are now disallowed outside of a constructor call
or member reference; to get a type object as a value, `T.self` is required.
This prevents the mistake of intending to construct an instance of a
class but forgetting the parens and ending up with the class object instead:
```swift
let x = MyObject // oops, I meant MyObject()...
return x.description() // ...and I accidentally called +description
// instead of -description
```
* Initializers are now classified as **designated initializers**, which
are responsible for initializing the current class object and
chaining via `super.init`, and **convenience initializers**, which
delegate to another initializer and can be inherited. For example:
```swift
class A {
var str: String
init() -> Self { // convenience initializer
self.init(withString: "hello")
}
init withString(str: String) { // designated initializer
self.str = str
}
}
```
When a subclass overrides all of its superclass's designated
initializers, the convenience initializers are inherited:
```swift
class B {
init withString(str: String) { // designated initializer
super.init(withString: str)
}
// inherits A.init()
}
```
Objective-C classes that provide `NS_DESIGNATED_INITIALIZER`
annotations will have their init methods mapped to designated
initializers or convenience initializers as appropriate; Objective-C
classes without `NS_DESIGNATED_INITIALIZER` annotations have all of
their `init` methods imported as designated initializers, which is
safe (but can be verbose for subclasses). Note that the syntax and
terminology is still somewhat in flux.
* Initializers can now be marked as `required` with an attribute,
meaning that every subclass is required to provide that initializer
either directly or by inheriting it from a superclass. To construct
```swift
class View {
@required init withFrame(frame: CGRect) { ... }
}
func buildView(subclassObj: View.Type, frame: CGRect) -> View {
return subclassObj(withFrame: frame)
}
class MyView : View {
@required init withFrame(frame: CGRect) {
super.init(withFrame: frame)
}
}
class MyOtherView : View {
// error: must override init withFrame(CGRect).
}
```
* Properties in Objective-C protocols are now correctly imported as properties.
(Previously the getter and setter were imported as methods.)
* Simple enums with no payloads, including `NS_ENUM`s imported
from Cocoa, now implicitly conform to the Equatable and Hashable protocols.
This means they can be compared with the `==` and `!=` operators and can
be used as `Dictionary` keys:
```swift
enum Flavor {
case Lemon, Banana, Cherry
}
assert(Flavor.Lemon == .Lemon)
assert(Flavor.Banana != .Lemon)
struct Profile {
var sweet, sour: Bool
}
let flavorProfiles: Dictionary<Flavor, Profile> = [
.Lemon: Profile(sweet: false, sour: true ),
.Banana: Profile(sweet: true, sour: false),
.Cherry: Profile(sweet: true, sour: true ),
]
assert(flavorProfiles[.Lemon].sour)
```
* `val` has been removed. Long live `let`!
* Values whose names clash with Swift keywords, such as Cocoa methods or
properties named `class`, `protocol`, `type`, etc., can now be defined and
accessed by wrapping reserved keywords in backticks to suppress their builtin
meaning:
```swift
let `class` = 0
let `type` = 1
let `protocol` = 2
println(`class`)
println(`type`)
println(`protocol`)
func foo(Int) `class`(Int) {}
foo(0, `class`: 1)
```
### 2014-02-26
* The `override` attribute is now required when overriding a method,
property, or subscript from a superclass. For example:
```swift
class A {
func foo() { }
}
class B : A {
@override func foo() { } // 'override' is required here
}
```
* We're renaming `val` back to `let`. The compiler accepts both for this week,
next week it will just accept `let`. Please migrate your code this week, sorry
for the back and forth on this.
* Swift now supports `#if`, `#else` and `#endif` blocks, along with target
configuration expressions, to allow for conditional compilation within
declaration and statement contexts.
Target configurations represent certain static information about the
compile-time build environment. They are implicit, hard-wired into the
compiler, and can only be referenced within the conditional expression of an
`#if` block.
Target configurations are tested against their values via a pseudo-function
invocation expression, taking a single argument expressed as an identifier.
The argument represents certain static build-time information.
There are currently two supported target configurations:
`os`, which can have the values `OSX` or `iOS`
`arch`, which can have the values `i386`, `x86_64`, `arm` and `arm64`
Within the context of an `#if` block's conditional expression, a target
configuration expression can evaluate to either `true` or `false`.
For example:
```swift
#if arch(x86_64)
println("Building for x86_64")
#else
println("Not building for x86_64")
#endif
class C {
#if os(OSX)
func foo() {
// OSX stuff goes here
}
#else
func foo() {
// non-OSX stuff goes here
}
#endif
}
```
The conditional expression of an `#if` block can be composed of one or more of
the following expression types:
- A unary expression, using `!`
- A binary expression, using `&&` or `||`
- A parenthesized expression
- A target configuration expression
For example:
```swift
#if os(iOS) && !arch(I386)
...
#endif
```
Note that `#if`/`#else`/`#endif` blocks do not constitute a preprocessor, and
must form valid and complete expressions or statements. Hence, the following
produces a parser error:
```swift
class C {
#if os(iOS)
func foo() {}
}
#else
func bar() {}
func baz() {}
}
#endif
```
Also note that "active" code will be parsed, typechecked and emitted, while
"inactive" code will only be parsed. This is why code in an inactive `#if` or
`#else` block will produce parser errors for malformed code. This allows the
compiler to detect basic errors in inactive regions.
This is the first step to getting functionality parity with the important
subset of the C preprocessor. Further refinements are planned for later.
* Swift now has both fully-closed ranges, which include their endpoint, and
half-open ranges, which don't.
```swift
(swift) for x in 0...5 { print(x) } ; print('\n') // half-open range
01234
(swift) for x in 0..5 { print(x) } ; print('\n') // fully-closed range
012345
```
* Property accessors have a new brace-based syntax, instead of using the former
"label like" syntax. The new syntax is:
```swift
var computedProperty: Int {
get {
return _storage
}
set {
_storage = value
}
}
var implicitGet: Int { // This form still works.
return 42
}
var storedPropertyWithObservingAccessors: Int = 0 {
willSet { ... }
didSet { ... }
}
```
* Properties and subscripts now work in protocols, allowing you to do things
like:
```swift
protocol Subscriptable {
subscript(idx1: Int, idx2: Int) -> Int { get set }
var prop: Int { get }
}
func foo(s: Subscriptable) {
return s.prop + s[42, 19]
}
```
These can be used for generic algorithms now as well.
* The syntax for referring to the type of a type, `T.metatype`, has been
changed to `T.Type`. The syntax for getting the type of a value, `typeof(x)`,
has been changed to `x.type`.
* `DynamicSelf` is now called `Self`; the semantics are unchanged.
* `destructor` has been replaced with `deinit`, to emphasize that it
is related to `init`. We will refer to these as
`deinitializers`. We've also dropped the parentheses, i.e.:
```swift
class MyClass {
deinit {
// release any resources we might have acquired, etc.
}
}
```
* Class methods defined within extensions of Objective-C classes can
now refer to `self`, including using `instancetype` methods. As a
result, `NSMutableString`, `NSMutableArray`, and `NSMutableDictionary`
objects can now be created with their respective literals, i.e.,
```swift
var dict: NSMutableDictionary = ["a" : 1, "b" : 2]
```
### 2014-02-19
* The `Stream` protocol has been renamed back to `Generator,` which is
precedented in other languages and causes less confusion with I/O
streaming.
* The `type` keyword was split into two: `static` and `class`. One can define
static functions and static properties in structs and enums like this:
```swift
struct S {
static func foo() {}
static var bar: Int = 0
}
enum E {
static func foo() {}
}
```
`class` keyword allows one to define class properties and class methods in
classes and protocols:
```swift
class C {
class func foo() {}
class var bar: Int = 0
}
protocol P {
class func foo() {}
class var bar: Int = 0
}
```
When using `class` and `static` in the extension, the choice of keyword
depends on the type being extended:
```swift
extension S {
static func baz() {}
}
extension C {
class func baz() {}
}
```
* The `let` keyword is no longer recognized. Please move to `val`.
* The standard library has been renamed to `Swift` (instead of `swift`) to be
more consistent with other modules on our platforms.
* `NSInteger` and other types that are layout-compatible with Swift standard
library types are now imported directly as those standard library types.
* Optional types now support a convenience method named "cache" to cache the
result of a closure. For example:
```swift
class Foo {
var _lazyProperty: Int?
var property: Int {
return _lazyProperty.cache { computeLazyProperty() }
}
}
```
### 2014-02-12
* We are experimenting with a new message send syntax. For example:
```swift
SKAction.colorizeWithColor(SKColor.whiteColor()) colorBlendFactor(1.0) duration(0.0)
```
When the message send is too long to fit on a single line, subsequent lines
must be indented from the start of the statement or declaration. For
example, this is a single message send:
```swift
SKAction.colorizeWithColor(SKColor.whiteColor())
colorBlendFactor(1.0)
duration(0.0)
```
while this is a message send to colorizeWithColor: followed by calls
to `colorBlendFactor` and `duration` (on self or to a global function):
```swift
SKAction.colorizeWithColor(SKColor.whiteColor())
colorBlendFactor(1.0) // call to 'colorBlendFactor'
duration(0.0) // call to 'duration'
```
* We are renaming the `let` keyword to `val`. The `let` keyword didn't work
out primarily because it is not a noun, so "defining a let" never sounded
right. We chose `val` over `const` and other options because `var` and `val`
have similar semantics (making syntactic similarity useful), because `const`
has varied and sordid connotations in C that we don't want to bring over, and
because we don't want to punish the "preferred" case with a longer keyword.
For migration purposes, the compiler now accepts `let` and `val` as synonyms,
`let` will be removed next week.
* Selector arguments in function arguments with only a type are now implicitly
named after the selector chunk that contains them. For example, instead of:
```swift
func addIntsWithFirst(first : Int) second(second : Int) -> Int {
return first+second
}
```
you can now write:
```swift
func addIntsWithFirst(first : Int) second(Int) -> Int {
return first+second
}
```
if you want to explicitly want to ignore an argument, it is recommended that
you continue to use the `_` to discard it, as in:
```swift
func addIntsWithFirst(first : Int) second(_ : Int) -> Int {...}
```
* The `@inout` attribute in argument lists has been promoted to a
context-sensitive keyword. Where before you might have written:
```swift
func swap<T>(a : @inout T, b : @inout T) {
(a, b) = (b, a)
}
```
You are now required to write:
```swift
func swap<T>(inout a : T, inout b : T) {
(a, b) = (b, a)
}
```
We made this change because `inout` is a fundamental part of the type
system, which attributes are a poor match for. The inout keyword is
also orthogonal to the `var` and `let` keywords (which may be specified in
the same place), so it fits naturally there.
* The `@mutating` attribute (which can be used on functions in structs,
enums, and protocols) has been promoted to a context-sensitive keyword.
Mutating struct methods are now written as:
```swift
struct SomeStruct {
mutating func f() {}
}
```
* Half-open ranges (those that don't include their endpoint) are now
spelled with three `.`s instead of two, for consistency with Ruby.
```swift
(swift) for x in 0...5 { print(x) } ; print('\n') // new syntax
01234
```
Next week, we'll introduce a fully-closed range which does include
its endpoint. This will provide:
```swift
(swift) for x in 0..5 { print(x) } ; print('\n') // coming soon
012345
```
These changes are being released separately so that users have a
chance to update their code before its semantics changes.
* Objective-C properties with custom getters/setters are now imported
into Swift as properties. For example, the Objective-C property
```swift
@property (getter=isEnabled) BOOL enabled;
```
was previously imported as getter (`isEnabled`) and setter
(`setEnabled`) methods. Now, it is imported as a property (`enabled`).
* `didSet`/`willSet` properties may now have an initial value specified:
```swift
class MyAwesomeView : UIView {
var enabled : Bool = false { // Initial value.
didSet: self.needsDisplay = true
}
...
}
```
they can also be used as non-member properties now, e.g. as a global
variable or a local variable in a function.
* Objective-C instancetype methods are now imported as methods that
return Swift's `DynamicSelf` type. While `DynamicSelf` is not
generally useful for defining methods in Swift, importing to it
eliminates the need for casting with the numerous `instancetype` APIs,
e.g.,
```swift
let tileNode: SKSpriteNode = SKSpriteNode.spriteNodeWithTexture(tileAtlas.textureNamed("tile\(tileNumber).png"))!
```
becomes
```swift
let tileNode = SKSpriteNode.spriteNodeWithTexture(tileAtlas.textureNamed("tile\(tileNumber).png"))
```
`DynamicSelf` will become more interesting in the coming weeks.
### 2014-02-05
* `if` and `while` statements can now conditionally bind variables. If the
condition of an `if` or `while` statement is a `let` declaration, then the
right-hand expression is evaluated as an `Optional` value, and control flow
proceeds by considering the binding to be `true` if the `Optional` contains a
value, or `false` if it is empty, and the variables are available in the true
branch. This allows for elegant testing of dynamic types, methods, nullable
pointers, and other Optional things:
```swift
class B : NSObject {}
class D : B {
func foo() { println("we have a D") }
}
var b: B = D()
if let d = b as D {
d.foo()
}
var id: AnyObject = D()
if let foo = id.foo {
foo()
}
```
* When referring to a member of an `AnyObject` (or `AnyClass`) object
and using it directly (such as calling it, subscripting, or
accessing a property on it), one no longer has to write the `?` or
`!`. The run-time check will be performed implicitly. For example:
```swift
func doSomethingOnViews(views: NSArray) {
for view in views {
view.updateLayer() // no '!' needed
}
}
```
Note that one can still test whether the member is available at
runtime using `?`, testing the optional result, or conditionally
binding a variable to the resulting member.
* The `swift` command line tool can now create executables and libraries
directly, just like Clang. Use `swift main.swift` to create an executable and
`swift -emit-library -o foo.dylib foo.swift` to create a library.
* Object files emitted by Swift are not debuggable on their own, even if you
compiled them with the `-g` option. This was already true if you had multiple
files in your project. To produce a debuggable Swift binary from the command
line, you must compile and link in a single step with `swift`, or pass object
files AND swiftmodule files back into `swift` after compilation.
(Or use Xcode.)
* `import` will no longer import other source files, only built modules.
* The current directory is no longer implicitly an import path. Use `-I .` if
you have modules in your current directory.
### 2014-01-29
* Properties in structs and classes may now have `willSet:` and `didSet:`
observing accessors defined on them:
For example, where before you may have written something like this in a class:
```swift
class MyAwesomeView : UIView {
var _enabled : Bool // storage
var enabled : Bool { // computed property
get:
return _enabled
set:
_enabled = value
self.needDisplay = true
}
...
}
```
you can now simply write:
```swift
class MyAwesomeView : UIView {
var enabled : Bool { // Has storage & observing methods
didSet: self.needDisplay = true
}
...
}
```
Similarly, if you want notification before the value is stored, you can use
`willSet`, which gets the incoming value before it is stored:
```swift
var x : Int {
willSet(value): // value is the default and may be elided, as with set:
println("changing from \(x) to \(value)")
didSet:
println("we've got a value of \(x) now.\n")
}
```
The `willSet`/`didSet` observers are triggered on any store to the property,
except stores from `init()`, destructors, or from within the observers
themselves.
Overall, a property now may either be "stored" (the default), "computed"
(have a `get:` and optionally a `set:` specifier), or an observed
(`willSet`/`didSet`) property. It is not possible to have a custom getter
or setter on an observed property, since they have storage.
Two known-missing bits are:
- **(rdar://problem/15920332) didSet/willSet variables need to allow initializers**
- **(rdar://problem/15922884) support non-member didset/willset properties**
Because of the first one, for now, you need to explicitly store an initial
value to the property in your `init()` method.
* Objective-C properties with custom getter or setter names are (temporarily)
not imported into Swift; the getter and setter will be imported individually
as methods instead. Previously, they would appear as properties within the
Objective-C class, but attempting to use the accessor with the customized
name would result in a crash.
The long-term fix is tracked as **(rdar://problem/15877160)**.
* Computed 'type' properties (that is, properties of types, rather
than of values of the type) are now permitted on classes, on generic
structs and enums, and in extensions. Stored 'type' properties in
these contexts remain unimplemented.
The implementation of stored 'type' properties is tracked as
**(rdar://problem/15915785)** (for classes) and **(rdar://problem/15915867)**
(for generic types).
* The following command-line flags have been deprecated in favor of new
spellings. The old spellings will be removed in the following week's build:
| Old Spelling | New Spelling |
|--------------------------|-------------------------------|
| `-emit-llvm` | `-emit-ir` |
| `-triple` | `-target` |
| `-serialize-diagnostics` | `-serialize-diagnostics-path` |
* Imported `NS_OPTIONS` types now have a default initializer which produces a
value with no options set. They can also be initialized to the empty set with
`nil`. These are equivalent:
```swift
var x = NSMatchingOptions()
var y: NSMatchingOptions = nil
```
### 2014-01-22
* The swift binary no longer has an SDK set by default. Instead, you must do
one of the following:
- pass an explicit `-sdk /path/to/sdk`
- set `SDKROOT` in your environment
- run `swift` through `xcrun`, which sets `SDKROOT` for you
* `let` declarations can now be used as struct/class properties. A `let`
property is mutable within `init()`, and immutable everywhere else.
```swift
class C {
let x = 42
let y : Int
init(y : Int) {
self.y = y // ok, self.y is mutable in init()
}
func test() {
y = 42 // error: 'y' isn't mutable
}
}
```
* The immutability model for structs and enums is complete, and arguments are
immutable by default. This allows the compiler to reject mutations of
temporary objects, catching common bugs. For example, this is rejected:
```swift
func setTo4(a : Double[]) {
a[10] = 4.0 // error: 'a' isn't mutable
}
...
setTo4(someArray)
```
since `a` is semantically a copy of the array passed into the function. The
proper fix in this case is to mark the argument is `@inout`, so the effect is
visible in the caller:
```swift
func setTo4(a : @inout Double[]) {
a[10] = 4.0 // ok: 'a' is a mutable reference
}
...
setTo4(&someArray)
```
Alternatively, if you really just want a local copy of the argument, you can
mark it `var`. The effects aren't visible in the caller, but this can be
convenient in some cases:
```swift
func doStringStuff(var s : String) {
s += "foo"
print(s)
}
```
* Objective-C instance variables are no longer imported from headers written in
Objective-C. Previously, they would appear as properties within the
Objective-C class, but trying to access them would result in a crash.
Additionally, their names can conflict with property names, which confuses
the Swift compiler, and there are no patterns in our frameworks that expect
you to access a parent or other class's instance variables directly. Use
properties instead.
* The `NSObject` protocol is now imported under the name
`NSObjectProtocol` (rather than `NSObjectProto`).
### 2014-01-15
* Improved deallocation of Swift classes that inherit from Objective-C
classes: Swift destructors are implemented as `-dealloc` methods that
automatically call the superclass's `-dealloc`. Stored properties are
released right before the object is deallocated (using the same
mechanism as ARC), allowing properties to be safely used in
destructors.
* Subclasses of `NSManagedObject` are now required to provide initial
values for each of their stored properties. This permits
initialization of these stored properties directly after +alloc to
provide memory safety with CoreData's dynamic subclassing scheme.
* `let` declarations are continuing to make slow progress. Curried
and selector-style arguments are now immutable by default, and
`let` declarations now get proper debug information.
### 2014-01-08
* The `static` keyword changed to `type`. One can now define "type
functions" and "type variables" which are functions and variables
defined on a type (rather than on an instance of the type), e.g.,
```swift
class X {
type func factory() -> X { ... }
type var version: Int
}
```
The use of `static` was actively misleading, since type methods
on classes are dynamically dispatched (the same as Objective-C
`+` methods).
Note that `type` is a context-sensitive keyword; it can still be
used as an identifier.
* Strings have a new native UTF-16 representation that can be
converted back and forth to `NSString` at minimal cost. String
literals are emitted as UTF-16 for string types that support it
(including Swift's `String`).
* Initializers can now delegate to other initializers within the same
class by calling `self.init`. For example:
```swift
class A { }
class B : A {
var title: String
init() {
// note: cannot access self before delegating
self.init(withTitle: "My Title")
}
init withTitle(title: String) {
self.title = title
super.init()
}
}
```
* Objective-C protocols no longer have the `Proto` suffix unless there
is a collision with a class name. For example, `UITableViewDelegate` is
now imported as `UITableViewDelegate` rather than
`UITableViewDelegateProto`. Where there is a conflict with a class,
the protocol will be suffixed with `Proto`, as in `NSObject` (the
class) and `NSObjectProto` (the protocol).
### 2014-01-01
* Happy New Year
* Division and remainder arithmetic now trap on overflow. Like with the other
operators, one can use the "masking" alternatives to get non-trapping
behavior. The behavior of the non-trapping masking operators is defined:
```swift
x &/ 0 == 0
x &% 0 == 0
SIGNED_MIN_FOR_TYPE &/ -1 == -1 // i.e. Int8: -0x80 / -1 == -0x80
SIGNED_MIN_FOR_TYPE &% -1 == 0
```
* Protocol conformance checking for `@mutating` methods is now implemented: an
`@mutating` struct method only fulfills a protocol requirement if the protocol
method was itself marked `@mutating`:
```swift
protocol P {
func nonmutating()
@mutating
func mutating()
}
struct S : P {
// Error, @mutating method cannot implement non-@mutating requirement.
@mutating
func nonmutating() {}
// Ok, mutating allowed, but not required.
func mutating() {}
}
```
As before, class methods never need to be marked `@mutating` (and indeed, they
aren't allowed to be marked as such).
### 2013-12-25
* Merry Christmas
* The setters of properties on value types (structs/enums) are now `@mutating` by
default. To mark a setter non-mutating, use the `@!mutating` attribute.
* Compiler inserts calls to `super.init()` into the class initializers that do
not call any initializers explicitly.
* A `map` method with the semantics of Haskell's `fmap` was added to
`Array<T>`. Map applies a function `f: T->U` to the values stored in
the array and returns an `Array<U>`. So,
```swift
(swift) func names(x: Int[]) -> String[] {
return x.map { "<" + String($0) + ">" }
}
(swift) names(Array<Int>())
// r0 : String[] = []
(swift) names([3, 5, 7, 9])
// r1 : String[] = ["<3>", "<5>", "<7>", "<9>"]
```
### 2013-12-18
* Global variables and static properties are now lazily initialized on first
use. Where you would use `dispatch_once` to lazily initialize a singleton
object in Objective-C, you can simply declare a global variable with an
initializer in Swift. Like `dispatch_once`, this lazy initialization is thread
safe.
Unlike C++ global variable constructors, Swift global variables and
static properties now never emit static constructors (and thereby don't
raise build warnings). Also unlike C++, lazy initialization naturally follows
dependency order, so global variable initializers that cross module
boundaries don't have undefined behavior or fragile link order dependencies.
* Swift has the start of an immutability model for value types. As part of this,
you can now declare immutable value bindings with a new `let` declaration,
which is semantically similar to defining a get-only property:
```swift
let x = foo()
print(x) // ok
x = bar() // error: cannot modify an immutable value
swap(&x, &y) // error: cannot pass an immutable value as @inout parameter
x.clear() // error: cannot call mutating method on immutable value
getX().clear() // error: cannot mutate a temporary
```
In the case of bindings of class type, the bound object itself is still
mutable, but you cannot change the binding.
```swift
let r = Rocket()
r.blastOff() // Ok, your rocket is mutable.
r = Rocket() // error: cannot modify an immutable binding.
```
In addition to the `let` declaration itself, `self` on classes, and a few
other minor things have switched to immutable bindings.
A pivotal part of this is that methods of value types (structs and enums) need
to indicate whether they can mutate self - mutating methods need to be
disallowed on let values (and get-only property results, temporaries, etc) but
non-mutating methods need to be allowed. The default for a method is that it
does not mutate `self`, though you can opt into mutating behavior with a new
`@mutating` attribute:
```swift
struct MyWeirdCounter {
var count : Int
func empty() -> Bool { return count == 0 }
@mutating
func reset() {
count = 0
}
...
}
let x = MyWeirdCounter()
x.empty() // ok
x.reset() // error, cannot mutate immutable 'let' value
```
One missing piece is that the compiler does not yet reject mutations of self
in a method that isn't marked `@mutating`. That will be coming soon. Related
to methods are properties. Getters and setters can be marked mutating as
well:
```swift
extension MyWeirdCounter {
var myproperty : Int {
get:
return 42
@mutating
set:
count = value*2
}
}
```
The intention is for setters to default to mutating, but this has not been
implemented yet. There is more to come here.
* A `map` method with the semantics of Haskell's `fmap` was added to
`Optional<T>`. Map applies a function `f: T->U` to any value stored in
an `Optional<T>`, and returns an `Optional<U>`. So,
```swift
(swift) func nameOf(x: Int?) -> String? {
return x.map { "<" + String($0) + ">" }
}
(swift)
(swift) var no = nameOf(.None) // Empty optional in...
// no : String? = <unprintable value>
(swift) no ? "yes" : "no" // ...empty optional out
// r0 : String = "no"
(swift)
(swift) nameOf(.Some(42)) // Non-empty in
// r1 : String? = <unprintable value>
(swift) nameOf(.Some(42))! // Non-empty out
// r2 : String = "<42>"
```
* Cocoa types declared with the `NS_OPTIONS` macro are now available in Swift.
Like `NS_ENUM` types, their values are automatically shortened based
on the common prefix of the value names in Objective-C, and the name can
be elided when type context provides it. They can be used in `if` statements
using the `&`, `|`, `^`, and `~` operators as in C:
```swift
var options: NSJSONWritingOptions = .PrettyPrinted
if options & .PrettyPrinted {
println("pretty-printing enabled")
}
```
We haven't yet designed a convenient way to author `NS_OPTIONS`-like types
in Swift.
### 2013-12-11
* Objective-C `id` is now imported as `AnyObject` (formerly known as
`DynamicLookup`), Objective-C `Class` is imported as `AnyClass`.
* The casting syntax `x as T` now permits both implicit conversions
(in which case it produces a value of type `T`) and for
runtime-checked casts (in which case it produces a value of type `T?`
that will be `.Some(casted x)` on success and `.None` on failure). An
example:
```swift
func f(x: AnyObject, y: NSControl) {
var view = y as NSView // has type 'NSView'
var maybeView = x as NSView // has type NSView?
}
```
* The precedence levels of binary operators has been redefined, with a much
simpler model than C's. This is with a goal to define away classes of bugs
such as those caught by Clang's `-Wparentheses` warnings, and to make it
actually possible for normal humans to reason about the precedence
relationships without having to look them up.
We ended up with 6 levels, from tightest binding to loosest:
```
exponentiative: <<, >>
multiplicative: *, /, %, &
additive: +, -, |, ^
comparative: ==, !=, <, <=, >=, >
conjunctive: &&
disjunctive: ||
```
* The `Enumerable` protocol has been renamed `Sequence`.
* The `Char` type has been renamed `UnicodeScalar`. The preferred
unit of string fragments for users is called `Character`.
* Initialization semantics for classes, structs and enums init methods are now
properly diagnosed by the compiler. Instance variables now follow the same
initialization rules as local variables: they must be defined before use. The
initialization model requires that all properties with storage in the current
class be initialized before `super.init` is called (or, in a root class, before
any method is called on `self,` and before the final return).
For example, this will yield an error:
```swift
class SomeClass : SomeBase {
var x : Int
init() {
// error: property 'self.x' not initialized at super.init call
super.init()
}
}
```
A simple fix for this is to change the property definition to `var x = 0`,
or to explicitly assign to it before calling `super.init()`.
* Relatedly, the compiler now diagnoses incorrect calls to `super.init()`. It
validates that any path through an initializer calls `super.init()` exactly once,
that all ivars are defined before the call to super.init, and that any uses
which require the entire object to be initialized come after the `super.init`
call.
* Type checker performance has improved considerably (but we still
have much work to do here).
### 2013-12-04
* The "slice" versus "array" subtlety is now dead. `Slice<T>` has been folded
into `Array<T>` and `T[]` is just sugar for `Array<T>`.
### 2013-11-20
* Unreachable code warning has been added:
```swift
var y: Int = 1
if y == 1 { // note: condition always evaluates to true
return y
}
return 1 // warning: will never be executed
```
* Overflows on integer type conversions are now detected at runtime and, when
dealing with constants, at compile time:
```swift
var i: Int = -129
var i8 = Int8(i)
// error: integer overflows when converted from 'Int' to 'Int8'
var si = Int8(-1)
var ui = UInt8(si)
// error: negative integer cannot be converted to unsigned type 'UInt8'
```
* `def` keyword was changed back to `func`.
### 2013-11-13
* Objective-C-compatible protocols can now contain optional
requirements, indicated by the `@optional` attribute:
```swift
@class_protocol @objc protocol NSWobbling {
@optional def wobble()
}
```
A class that conforms to the `NSWobbling` protocol above can (but does
not have to) implement `wobble`. When referring to the `wobble`
method for a value of type `NSWobbling` (or a value of generic type
that is bounded by `NSWobbling`), the result is an optional value
indicating whether the underlying object actually responds to the
given selector, using the same mechanism as messaging `id`. One can
use `!` to assume that the method is always there, `?` to chain the
optional, or conditional branches to handle each case distinctly:
```swift
def tryToWobble(w : NSWobbling) {
w.wobble() // error: cannot call a value of optional type
w.wobble!() // okay: calls -wobble, but fails at runtime if not there
w.wobble?() // okay: calls -wobble only if it's there, otherwise no-op
if w.wobble {
// okay: we know -wobble is there
} else {
// okay: we know -wobble is not there
}
}
```
* Enums from Cocoa that are declared with the `NS_ENUM` macro are now imported
into Swift as Swift enums. Like all Swift enums, the constants of the Cocoa
enum are scoped as members of the enum type, so the importer strips off the
common prefix of all of the constant names in the enum when forming the Swift
interface. For example, this Objective-C declaration:
```objc
typedef NS_ENUM(NSInteger, NSComparisonResult) {
NSOrderedAscending,
NSOrderedSame,
NSOrderedDescending,
};
```
shows up in Swift as:
```swift
enum NSComparisonResult : Int {
case Ascending, Same, Descending
}
```
The `enum` cases can then take advantage of type inference from context.
In Objective-C, you would write:
```objc
NSNumber *foo = [NSNumber numberWithInt: 1];
NSNumber *bar = [NSNumber numberWithInt: 2];
switch ([foo compare: bar]) {
case NSOrderedAscending:
NSLog(@"ascending\n");
break;
case NSOrderedSame:
NSLog(@"same\n");
break;
case NSOrderedDescending:
NSLog(@"descending\n");
break;
}
```
In Swift, this becomes:
```swift
var foo: NSNumber = 1
var bar: NSNumber = 2
switch foo.compare(bar) {
case .Ascending:
println("ascending")
case .Same:
println("same")
case .Descending:
println("descending")
}
```
* Work has begun on implementing static properties. Currently they are supported
for nongeneric structs and enums.
```swift
struct Foo {
static var foo: Int = 2
}
enum Bar {
static var bar: Int = 3
}
println(Foo.foo)
println(Bar.bar)
```
### 2013-11-06
* `func` keyword was changed to `def`.
* Implicit conversions are now allowed from an optional type `T?` to another
optional type `U?` if `T` is implicitly convertible to `U`. For example,
optional subclasses convert to their optional base classes:
```swift
class Base {}
class Derived : Base {}
var d: Derived? = Derived()
var b: Base? = d
```
### 2013-10-30
* Type inference for variables has been improved, allowing any
variable to have its type inferred from its initializer, including
global and instance variables:
```swift
class MyClass {
var size = 0 // inferred to Int
}
var name = "Swift"
```
Additionally, the arguments of a generic type can also be inferred
from the initializer:
```swift
// infers Dictionary<String, Int>
var dict: Dictionary = ["Hello": 1, "World": 2]
```
### 2013-10-23
* Missing return statement from a non-`Void` function is diagnosed as an error.
* `Vector<T>` has been replaced with `Array<T>`. This is a complete rewrite to use
value-semantics and copy-on-write behavior. The former means that you never
need to defensively copy again (or remember to attribute a property as "copy")
and the latter yields better performance than defensive copying. `Dictionary<T>`
is next.
* `switch` can now pattern-match into structs and classes, using the syntax
`case Type(property1: pattern1, property2: pattern2, ...):`.
```swift
struct Point { var x, y: Double }
struct Size { var w, h: Double }
struct Rect { var origin: Point; var size: Size }
var square = Rect(Point(0, 0), Size(10, 10))
switch square {
case Rect(size: Size(w: var w, h: var h)) where w == h:
println("square")
case Rect(size: Size(w: var w, h: var h)) where w > h:
println("long rectangle")
default:
println("tall rectangle")
}
```
Currently only stored properties ("ivars" in ObjC terminology) are
supported by the implementation.
* Array and dictionary literals allow an optional trailing comma:
```swift
var a = [1, 2,]
var d = ["a": 1, "b": 2,]
```
### 2013-10-16
* Unlike in Objective-C, objects of type `id` in Swift do not
implicitly convert to any class type. For example, the following
code is ill-formed:
```swift
func getContentViewBounds(window : NSWindow) -> NSRect {
var view : NSView = window.contentView() // error: 'id' doesn't implicitly convert to NSView
return view.bounds()
}
```
because `contentView()` returns an `id`. One can now use the postfix
`!` operator to allow an object of type `id` to convert to any class
type, e.g.,
```swift
func getContentViewBounds(window : NSWindow) -> NSRect {
var view : NSView = window.contentView()! // ok: checked conversion to NSView
return view.bounds()
}
```
The conversion is checked at run-time, and the program will fail if
the object is not an NSView. This is shorthand for
```swift
var view : NSView = (window.contentView() as NSView)!
```
which checks whether the content view is an `NSView` (via the `as
NSView`). That operation returns an optional `NSView` (written
`NSView?`) and the `!` operation assumes that the cast succeeded,
i.e., that the optional has a value in it.
* The unconditional checked cast syntax `x as! T` has been removed. Many cases
where conversion from `id` is necessary can now be handled by postfix `!`
(see above). Fully general unconditional casts can still be expressed using
`as` and postfix `!` together, `(x as T)!`.
* The old "square bracket" attribute syntax has been removed.
* Overflows on construction of integer and floating point values from integer
literals that are too large to fit the type are now reported by the compiler.
Here are some examples:
```swift
var x = Int8(-129)
// error: integer literal overflows when stored into 'Int8'
var y: Int = 0xFFFF_FFFF_FFFF_FFFF_F
// error: integer literal overflows when stored into 'Int'
```
Overflows in constant integer expressions are also reported by the compiler.
```swift
var x: Int8 = 125
var y: Int8 = x + 125
// error: arithmetic operation '125 + 125' (on type 'Int8') results in
// an overflow
```
* Division by zero in constant expressions is now detected by the compiler:
```swift
var z: Int = 0
var x = 5 / z // error: division by zero
```
* Generic structs with type parameters as field types are now fully supported.
```swift
struct Pair<T, U> {
var first: T
var second: U
}
```
### 2013-10-09
* Autorelease pools can now be created using the `autoreleasepool` function.
```swift
autoreleasepool {
// code
}
```
Note that the wrapped code is a closure, so constructs like `break` and
`continue` and `return` do not behave as they would inside an Objective-C
`@autoreleasepool` statement.
* Enums can now declare a "raw type", and cases can declare "raw values",
similar to the integer underlying type of C enums:
```swift
// Declare the underlying type as in Objective-C or C++11, with
// ': Type'
enum AreaCode : Int {
// Assign explicit values to cases with '='
case SanFrancisco = 415
case EastBay = 510
case Peninsula = 650
case SanJose = 408
// Values are also assignable by implicit auto-increment
case Galveston // = 409
case Baltimore // = 410
}
```
This introduces `fromRaw` and `toRaw` methods on the enum to perform
conversions from and to the raw type:
```swift
/* As if declared:
extension AreaCode {
// Take a raw value, and produce the corresponding enum value,
// or None if there is no corresponding enum value
static func fromRaw(raw:Int) -> AreaCode?
// Return the corresponding raw value for 'self'
func toRaw() -> Int
}
*/
AreaCode.fromRaw(415) // => .Some(.SanFrancisco)
AreaCode.fromRaw(111) // => .None
AreaCode.SanJose.toRaw() // => 408
```
Raw types are not limited to integer types--they can additionally be
character, floating-point, or string values:
```swift
enum State : String {
case CA = "California"
case OR = "Oregon"
case WA = "Washington"
}
enum SquareRootOfInteger : Float {
case One = 1.0
case Two = 1.414
case Three = 1.732
case Four = 2.0
}
```
Raw types are currently limited to simple C-like enums with no payload cases.
The raw values are currently restricted to simple literal values; expressions
such as `1 + 1` or references to other enum cases are not yet supported.
Raw values are also currently required to be unique for each case in an enum.
Enums with raw types implicitly conform to the `RawRepresentable` protocol,
which exposes the fromRaw and toRaw methods to generics:
```swift
protocol RawRepresentable {
typealias RawType
static func fromRaw(raw: RawType) -> Self?
func toRaw() -> RawType
}
```
* Attribute syntax has been redesigned (see **(rdar://10700853)** and
**(rdar://14462729)**) so that attributes now precede the declaration and use
the `@` character to signify them. Where before you might have written:
```swift
func [someattribute=42] foo(a : Int) {}
```
you now write:
```swift
@someattribute=42
func foo(a : Int) {}
```
This flows a lot better (attributes don't push the name for declarations away),
and means that square brackets are only used for array types, collection
literals, and subscripting operations.
* The `for` loop now uses the Generator protocol instead of the `Enumerator`
protocol to iterate a sequence. This protocol looks like this:
```swift
protocol Generator {
typealias Element
func next() -> Element?
}
```
The single method `next()` advances the generator and returns an
Optional, which is either `.Some(value)`, wrapping the next value out
of the underlying sequence, or `.None` to signal that there are no
more elements. This is an improvement over the previous Enumerator
protocol because it eliminates the separate `isEmpty()` query and
better reflects the semantics of ephemeral sequences like
un-buffered input streams.
### 2013-10-02
* The `[byref]` attribute has been renamed to `[inout]`. When applied to a logical
property, the getter is invoked before a call and the setter is applied to
write back the result. `inout` conveys this better and aligns with existing
Objective-C practice better.
* `[inout]` arguments can now be captured into closures. The semantics of a
inout capture are that the captured variable is an independent local variable
of the callee, and the inout is updated to contain the value of that local
variable at function exit.
In the common case, most closure arguments do not outlive the duration of
their callee, and the observable behavior is unchanged. However, if the
captured variable outlives the function, you can observe this. For example,
this code:
```swift
func foo(x : [inout] Int) -> () -> Int {
func bar() -> Int {
x += 1
return x
}
// Call 'bar' once while the inout is active.
bar()
return bar
}
var x = 219
var f = foo(&x)
// x is updated to the value of foo's local x at function exit.
println("global x = \(x)")
// These calls only update the captured local 'x', which is now independent
// of the inout parameter.
println("local x = \(f())")
println("local x = \(f())")
println("local x = \(f())")
println("global x = \(x)")
```
will print:
```
global x = 220
local x = 221
local x = 222
local x = 223
global x = 220
```
In no case will you end up with a dangling pointer or other unsafe construct.
* `x as T` now performs a checked cast to `T?`, producing `.Some(t)` if the
cast succeeds, or `.None` if the cast fails.
* The ternary expression (`x ? y : z`) now requires whitespace between the
first expression and the question mark. This permits `?` to be used
as a postfix operator.
* A significant new piece of syntactic sugar has been added to ease working
with optional values. The `?` postfix operator is analogous to `!`, but
instead of asserting on None, it causes all the following postfix
operators to get skipped and return `None`.
In a sense, this generalizes (and makes explicit) the Objective-C behavior
where message sends to `nil` silently produce the zero value of the result.
For example, this code
```swift
object?.parent.notifyChildEvent?(object!, .didExplode)
```
first checks whether `object` has a value; if so, it drills to its
parent and checks whether that object implements the `notifyChildEvent`
method; if so, it calls that method. (Note that we do not yet have
generalized optional methods.)
This code:
```swift
var titleLength = object?.title.length
```
checks whether `object` has a value and, if so, asks for the length of
its title. `titleLength` will have type `Int?`, and if `object` was
missing, the variable will be initialized to None.
* Objects with type `id` can now be used as the receiver of property
accesses and subscript operations to get (but not set) values. The
result is of optional type. For example, for a variable `obj` of
type `id`, the expression
```swift
obj[0]
```
will produce a value of type `id`, which will either contain the
result of the message send objectAtIndexedSubscript(0) (wrapped in an
optional type) or, if the object does not respond to
`objectAtIndexedSubscript:`, an empty optional. The same approach
applies to property accesses.
* `_` can now be used not only in `var` bindings, but in assignments as well,
to ignore elements of a tuple assignment, or to explicitly ignore values.
```swift
var a = (1, 2.0, 3)
var x = 0, y = 0
_ = a // explicitly load and discard 'a'
(x, _, y) = a // assign a.0 to x and a.2 to y
```
### 2013-09-24
* The `union` keyword has been replaced with `enum`. Unions and enums
are semantically identical in swift (the former just has data
associated with its discriminators) and `enum` is the vastly more
common case. For more rationale, please see
[docs/proposals/Enums.rst](https://github.com/apple/swift/blob/main/docs/proposals/Enums.rst)
* The Optional type `T?` is now represented as an `enum`:
```swift
enum Optional<T> {
case None
case Some(T)
}
```
This means that, in addition to the existing Optional APIs, it can be
pattern-matched with switch:
```swift
var x : X?, y : Y?
switch (x, y) {
// Both are present
case (.Some(var a), .Some(var b)):
println("both")
// One is present
case (.Some, .None):
case (.None, .Some):
println("one")
// Neither is present
case (.None, .None):
println("neither")
}
```
* Enums now allow multiple cases to be declared in a comma-separated list
in a single `case` declaration:
```swift
enum Color {
case Red, Green, Blue
}
```
* The Objective-C `id` and `Class` types now support referring to
methods declared in any class or protocol without a downcast. For
example, given a variable `sender` of type `id`, one can refer to
`-isEqual: with:`
```swift
sender.isEqual
```
The actual object may or may not respond to `-isEqual`, so this
expression returns result of optional type whose value is determined via a
compiler-generated `-respondsToSelector` send. When it succeeds, the
optional contains the method; when it fails, the optional is empty.
To safely test the optional, one can use, e.g.,
```swift
var senderIsEqual = sender.isEqual
if senderIsEqual {
// this will never trigger an "unrecognized selector" failure
var equal = senderIsEqual!(other)
} else {
// sender does not respond to -isEqual:
}
```
When you *know* that the method is there, you can use postfix `!` to
force unwrapping of the optional, e.g.,
```swift
sender.isEqual!(other)
```
This will fail at runtime if in fact sender does not respond to `-isEqual:`.
We have some additional syntactic optimizations planned for testing
an optional value and handling both the success and failure cases
concisely. Watch this space.
* Weak references now always have optional type. If a weak variable
has an explicit type, it must be an optional type:
```swift
var [weak] x : NSObject?
```
If the variable is not explicitly typed, its type will still be
inferred to be an optional type.
* There is now an implicit conversion from `T` to `T?`.
### 2013-09-17
* Constructor syntax has been improved to align better with
Objective-C's `init` methods. The `constructor` keyword has been
replaced with `init`, and the selector style of declaration used for
func declarations is now supported. For example:
```swift
class Y : NSObject {
init withInt(i : Int) string(s : String) {
super.init() // call superclass initializer
}
}
```
One can use this constructor to create a `Y` object with, e.g.,
```swift
Y(withInt:17, string:"Hello")
```
Additionally, the rules regarding the selector corresponding to such
a declaration have been revised. The selector for the above
initializer is `initWithInt:string:`; the specific rules are
described in the documentation.
Finally, Swift initializers now introduce Objective-C entry points,
so a declaration such as:
```swift
class X : NSObject {
init() {
super.init()
}
}
```
Overrides `NSObject`'s `-init` method (which it calls first) as well
as introducing the 'allocating' entry point so that one can create a
new `X` instance with the syntax `X()`.
* Variables in top-level code (i.e. scripts, but not global variables in
libraries) that lack an initializer now work just like local variables:
they must be explicitly assigned-to sometime before any use, instead of
being default constructed. Instance variables are still on the TODO
list.
* Generic unions with a single payload case and any number of empty cases
are now implemented, for example:
```swift
union Maybe<T> {
case Some(T)
case None
}
union Tristate<T> {
case Initialized(T)
case Initializing
case Uninitialized
}
```
Generic unions with multiple payload cases are still not yet implemented.
### 2013-09-11
* The implementation now supports partial application of class and struct
methods:
```swift
(swift) class B { func foo() { println("B") } }
(swift) class D : B { func foo() { println("D") } }
(swift) var foo = B().foo
// foo : () -> () = <unprintable value>
(swift) foo()
B
(swift) foo = D().foo
(swift) foo()
D
```
Support for partial application of Objective-C class methods and methods in
generic contexts is still incomplete.
### 2013-09-04
* Local variable declarations without an initializer are no longer implicitly
constructed. The compiler now verifies that they are initialized on all
paths leading to a use of the variable. This means that constructs like this
are now allowed:
```swift
var p : SomeProtocol
if whatever {
p = foo()
} else {
p = bar()
}
```
where before, the compiler would reject the definition of `p` saying that it
needed an initializer expression.
Since all local variables must be initialized before use, simple things like
this are now rejected as well:
```swift
var x : Int
print(x)
```
The fix is to initialize the value on all paths, or to explicitly default
initialize the value in the declaration, e.g. with `var x = 0` or with
`var x = Int()` (which works for any default-constructible type).
* The implementation now supports unions containing protocol types and weak
reference types.
* The type annotation syntax, `x as T`, has been removed from the language.
The checked cast operations `x as! T` and `x is T` still remain.
### 2013-08-28
* `this` has been renamed to `self`. Similarly, `This` has been renamed to
`Self`.
* Swift now supports unions. Unlike C unions, Swift's `union` is type-safe
and always knows what type it contains at runtime. Union members are labeled
using `case` declarations; each case may have a different set of
types or no type:
```swift
union MaybeInt {
case Some(Int)
case None
}
union HTMLTag {
case A(href:String)
case IMG(src:String, alt:String)
case BR
}
```
Each `case` with a type defines a static constructor function for the union
type. `case` declarations without types become static members:
```swift
var br = HTMLTag.BR
var a = HTMLTag.A(href:"http://www.apple.com/")
// 'HTMLTag' scope deduced for '.IMG' from context
var img : HTMLTag = .IMG(src:"http://www.apple.com/mac-pro.png",
alt:"The new Mac Pro")
```
Cases can be pattern-matched using `switch`:
```swift
switch tag {
case .BR:
println("<br>")
case .IMG(var src, var alt):
println("<img src=\"\(escape(src))\" alt=\"\(escape(alt))\">")
case .A(var href):
println("<a href=\"\(escape(href))\">")
}
```
Due to implementation limitations, recursive unions are not yet supported.
* Swift now supports autolinking, so importing frameworks or Swift libraries
should no longer require adding linker flags or modifying your project file.
### 2013-08-14
* Swift now supports weak references by applying the `[weak]` attribute to a
variable declaration.
```swift
(swift) var x = NSObject()
// x : NSObject = <NSObject: 0x7f95d5804690>
(swift) var [weak] w = x
// w : NSObject = <NSObject: 0x7f95d5804690>
(swift) w == nil
// r2 : Bool = false
(swift) x = NSObject()
(swift) w == nil
// r3 : Bool = true
```
Swift also supports a special form of weak reference, called `[unowned]`, for
references that should never be `nil` but are required to be weak to break
cycles, such as parent or sibling references. Accessing an `[unowned]`
reference asserts that the reference is still valid and implicitly promotes
the loaded reference to a strong reference, so it does not need to be loaded
and checked for nullness before use like a true `[weak]` reference.
```swift
class Parent {
var children : Array<Child>
func addChild(c:Child) {
c.parent = this
children.append(c)
}
}
class Child {
var [unowned] parent : Parent
}
```
### 2013-07-31
* Numeric literals can now use underscores as separators. For example:
```swift
var billion = 1_000_000_000
var crore = 1_00_00_000
var MAXINT = 0x7FFF_FFFF_FFFF_FFFF
var SMALLEST_DENORM = 0x0.0000_0000_0000_1p-1022
```
* Types conforming to protocols now must always declare the conformance in
their inheritance clause.
* The build process now produces serialized modules for the standard library,
greatly improving build times.
### 2013-07-24
* Arithmetic operators `+`, `-`, `*`, and `/` on integer types now do
overflow checking and trap on overflow. A parallel set of masking operators,
`&+`, `&-`, `&*`, and `&/`, are defined to perform two's complement wrapping
arithmetic for all signed and unsigned integer types.
* Debugger support. Swift has a `-g` command line switch that turns on
debug info for the compiled output. Using the standard lldb debugger
this will allow single-stepping through Swift programs, printing
backtraces, and navigating through stack frames; all in sync with
the corresponding Swift source code. An unmodified lldb cannot
inspect any variables.
Example session:
```
$ echo 'println("Hello World")' >hello.swift
$ swift hello.swift -c -g -o hello.o
$ ld hello.o "-dynamic" "-arch" "x86_64" "-macosx_version_min" "10.9.0" \
-framework Foundation lib/swift/libswift_stdlib_core.dylib \
lib/swift/libswift_stdlib_posix.dylib -lSystem -o hello
$ lldb hello
Current executable set to 'hello' (x86_64).
(lldb) b top_level_code
Breakpoint 1: where = hello`top_level_code + 26 at hello.swift:1, addre...
(lldb) r
Process 38592 launched: 'hello' (x86_64)
Process 38592 stopped
* thread #1: tid = 0x1599fb, 0x0000000100000f2a hello`top_level_code + ...
frame #0: 0x0000000100000f2a hello`top_level_code + 26 at hello.shi...
-> 1 println("Hello World")
(lldb) bt
* thread #1: tid = 0x1599fb, 0x0000000100000f2a hello`top_level_code + ...
frame #0: 0x0000000100000f2a hello`top_level_code + 26 at hello.shi...
frame #1: 0x0000000100000f5c hello`main + 28
frame #2: 0x00007fff918605fd libdyld.dylib`start + 1
frame #3: 0x00007fff918605fd libdyld.dylib`start + 1
```
Also try `s`, `n`, `up`, `down`.
### 2013-07-17
* Swift now has a `switch` statement, supporting pattern matching of
multiple values with variable bindings, guard expressions, and range
comparisons. For example:
```swift
func classifyPoint(point:(Int, Int)) {
switch point {
case (0, 0):
println("origin")
case (_, 0):
println("on the x axis")
case (0, _):
println("on the y axis")
case (var x, var y) where x == y:
println("on the y = x diagonal")
case (var x, var y) where -x == y:
println("on the y = -x diagonal")
case (-10..10, -10..10):
println("close to the origin")
case (var x, var y):
println("length \(sqrt(x*x + y*y))")
}
}
```
### 2013-07-10
* Swift has a new closure syntax. The new syntax eliminates the use of
pipes. Instead, the closure signature is written the same way as a
function type and is separated from the body by the `in`
keyword. For example:
```swift
sort(fruits) { (lhs : String, rhs : String) -> Bool in
return lhs > rhs
}
```
When the types are omitted, one can also omit the parentheses, e.g.,
```swift
sort(fruits) { lhs, rhs in lhs > rhs }
```
Closures with no parameters or that use the anonymous parameters
(`$0`, `$1`, etc.) don't need the `in`, e.g.,
```swift
sort(fruits) { $0 > $1 }
```
* `nil` can now be used without explicit casting. Previously, `nil` had
type `NSObject`, so one would have to write (e.g.) `nil as! NSArray`
to create a `nil` `NSArray`. Now, `nil` picks up the type of its
context.
* `POSIX.EnvironmentVariables` and `swift.CommandLineArguments` global variables
were merged into a `swift.Process` variable. Now you can access command line
arguments with `Process.arguments`. In order to access environment variables
add `import POSIX` and use `Process.environmentVariables`.
<!-- References -->
[SE-0001]: <https://github.com/apple/swift-evolution/blob/main/proposals/0001-keywords-as-argument-labels.md>
[SE-0002]: <https://github.com/apple/swift-evolution/blob/main/proposals/0002-remove-currying.md>
[SE-0003]: <https://github.com/apple/swift-evolution/blob/main/proposals/0003-remove-var-parameters.md>
[SE-0004]: <https://github.com/apple/swift-evolution/blob/main/proposals/0004-remove-pre-post-inc-decrement.md>
[SE-0005]: <https://github.com/apple/swift-evolution/blob/main/proposals/0005-objective-c-name-translation.md>
[SE-0006]: <https://github.com/apple/swift-evolution/blob/main/proposals/0006-apply-api-guidelines-to-the-standard-library.md>
[SE-0007]: <https://github.com/apple/swift-evolution/blob/main/proposals/0007-remove-c-style-for-loops.md>
[SE-0008]: <https://github.com/apple/swift-evolution/blob/main/proposals/0008-lazy-flatmap-for-optionals.md>
[SE-0009]: <https://github.com/apple/swift-evolution/blob/main/proposals/0009-require-self-for-accessing-instance-members.md>
[SE-0010]: <https://github.com/apple/swift-evolution/blob/main/proposals/0010-add-staticstring-unicodescalarview.md>
[SE-0011]: <https://github.com/apple/swift-evolution/blob/main/proposals/0011-replace-typealias-associated.md>
[SE-0012]: <https://github.com/apple/swift-evolution/blob/main/proposals/0012-add-noescape-to-public-library-api.md>
[SE-0013]: <https://github.com/apple/swift-evolution/blob/main/proposals/0013-remove-partial-application-super.md>
[SE-0014]: <https://github.com/apple/swift-evolution/blob/main/proposals/0014-constrained-AnySequence.md>
[SE-0015]: <https://github.com/apple/swift-evolution/blob/main/proposals/0015-tuple-comparison-operators.md>
[SE-0016]: <https://github.com/apple/swift-evolution/blob/main/proposals/0016-initializers-for-converting-unsafe-pointers-to-ints.md>
[SE-0017]: <https://github.com/apple/swift-evolution/blob/main/proposals/0017-convert-unmanaged-to-use-unsafepointer.md>
[SE-0018]: <https://github.com/apple/swift-evolution/blob/main/proposals/0018-flexible-memberwise-initialization.md>
[SE-0019]: <https://github.com/apple/swift-evolution/blob/main/proposals/0019-package-manager-testing.md>
[SE-0020]: <https://github.com/apple/swift-evolution/blob/main/proposals/0020-if-swift-version.md>
[SE-0021]: <https://github.com/apple/swift-evolution/blob/main/proposals/0021-generalized-naming.md>
[SE-0022]: <https://github.com/apple/swift-evolution/blob/main/proposals/0022-objc-selectors.md>
[SE-0023]: <https://github.com/apple/swift-evolution/blob/main/proposals/0023-api-guidelines.md>
[SE-0024]: <https://github.com/apple/swift-evolution/blob/main/proposals/0024-optional-value-setter.md>
[SE-0025]: <https://github.com/apple/swift-evolution/blob/main/proposals/0025-scoped-access-level.md>
[SE-0026]: <https://github.com/apple/swift-evolution/blob/main/proposals/0026-abstract-classes-and-methods.md>
[SE-0027]: <https://github.com/apple/swift-evolution/blob/main/proposals/0027-string-from-code-units.md>
[SE-0028]: <https://github.com/apple/swift-evolution/blob/main/proposals/0028-modernizing-debug-identifiers.md>
[SE-0029]: <https://github.com/apple/swift-evolution/blob/main/proposals/0029-remove-implicit-tuple-splat.md>
[SE-0030]: <https://github.com/apple/swift-evolution/blob/main/proposals/0030-property-behavior-decls.md>
[SE-0031]: <https://github.com/apple/swift-evolution/blob/main/proposals/0031-adjusting-inout-declarations.md>
[SE-0032]: <https://github.com/apple/swift-evolution/blob/main/proposals/0032-sequencetype-find.md>
[SE-0033]: <https://github.com/apple/swift-evolution/blob/main/proposals/0033-import-objc-constants.md>
[SE-0034]: <https://github.com/apple/swift-evolution/blob/main/proposals/0034-disambiguating-line.md>
[SE-0035]: <https://github.com/apple/swift-evolution/blob/main/proposals/0035-limit-inout-capture.md>
[SE-0036]: <https://github.com/apple/swift-evolution/blob/main/proposals/0036-enum-dot.md>
[SE-0037]: <https://github.com/apple/swift-evolution/blob/main/proposals/0037-clarify-comments-and-operators.md>
[SE-0038]: <https://github.com/apple/swift-evolution/blob/main/proposals/0038-swiftpm-c-language-targets.md>
[SE-0039]: <https://github.com/apple/swift-evolution/blob/main/proposals/0039-playgroundliterals.md>
[SE-0040]: <https://github.com/apple/swift-evolution/blob/main/proposals/0040-attributecolons.md>
[SE-0041]: <https://github.com/apple/swift-evolution/blob/main/proposals/0041-conversion-protocol-conventions.md>
[SE-0042]: <https://github.com/apple/swift-evolution/blob/main/proposals/0042-flatten-method-types.md>
[SE-0043]: <https://github.com/apple/swift-evolution/blob/main/proposals/0043-declare-variables-in-case-labels-with-multiple-patterns.md>
[SE-0044]: <https://github.com/apple/swift-evolution/blob/main/proposals/0044-import-as-member.md>
[SE-0045]: <https://github.com/apple/swift-evolution/blob/main/proposals/0045-scan-takewhile-dropwhile.md>
[SE-0046]: <https://github.com/apple/swift-evolution/blob/main/proposals/0046-first-label.md>
[SE-0047]: <https://github.com/apple/swift-evolution/blob/main/proposals/0047-nonvoid-warn.md>
[SE-0048]: <https://github.com/apple/swift-evolution/blob/main/proposals/0048-generic-typealias.md>
[SE-0049]: <https://github.com/apple/swift-evolution/blob/main/proposals/0049-noescape-autoclosure-type-attrs.md>
[SE-0050]: <https://github.com/apple/swift-evolution/blob/main/proposals/0050-floating-point-stride.md>
[SE-0051]: <https://github.com/apple/swift-evolution/blob/main/proposals/0051-stride-semantics.md>
[SE-0052]: <https://github.com/apple/swift-evolution/blob/main/proposals/0052-iterator-post-nil-guarantee.md>
[SE-0053]: <https://github.com/apple/swift-evolution/blob/main/proposals/0053-remove-let-from-function-parameters.md>
[SE-0054]: <https://github.com/apple/swift-evolution/blob/main/proposals/0054-abolish-iuo.md>
[SE-0055]: <https://github.com/apple/swift-evolution/blob/main/proposals/0055-optional-unsafe-pointers.md>
[SE-0056]: <https://github.com/apple/swift-evolution/blob/main/proposals/0056-trailing-closures-in-guard.md>
[SE-0057]: <https://github.com/apple/swift-evolution/blob/main/proposals/0057-importing-objc-generics.md>
[SE-0058]: <https://github.com/apple/swift-evolution/blob/main/proposals/0058-objectivecbridgeable.md>
[SE-0059]: <https://github.com/apple/swift-evolution/blob/main/proposals/0059-updated-set-apis.md>
[SE-0060]: <https://github.com/apple/swift-evolution/blob/main/proposals/0060-defaulted-parameter-order.md>
[SE-0061]: <https://github.com/apple/swift-evolution/blob/main/proposals/0061-autoreleasepool-signature.md>
[SE-0062]: <https://github.com/apple/swift-evolution/blob/main/proposals/0062-objc-keypaths.md>
[SE-0063]: <https://github.com/apple/swift-evolution/blob/main/proposals/0063-swiftpm-system-module-search-paths.md>
[SE-0064]: <https://github.com/apple/swift-evolution/blob/main/proposals/0064-property-selectors.md>
[SE-0065]: <https://github.com/apple/swift-evolution/blob/main/proposals/0065-collections-move-indices.md>
[SE-0066]: <https://github.com/apple/swift-evolution/blob/main/proposals/0066-standardize-function-type-syntax.md>
[SE-0067]: <https://github.com/apple/swift-evolution/blob/main/proposals/0067-floating-point-protocols.md>
[SE-0068]: <https://github.com/apple/swift-evolution/blob/main/proposals/0068-universal-self.md>
[SE-0069]: <https://github.com/apple/swift-evolution/blob/main/proposals/0069-swift-mutability-for-foundation.md>
[SE-0070]: <https://github.com/apple/swift-evolution/blob/main/proposals/0070-optional-requirements.md>
[SE-0071]: <https://github.com/apple/swift-evolution/blob/main/proposals/0071-member-keywords.md>
[SE-0072]: <https://github.com/apple/swift-evolution/blob/main/proposals/0072-eliminate-implicit-bridging-conversions.md>
[SE-0073]: <https://github.com/apple/swift-evolution/blob/main/proposals/0073-noescape-once.md>
[SE-0074]: <https://github.com/apple/swift-evolution/blob/main/proposals/0074-binary-search.md>
[SE-0075]: <https://github.com/apple/swift-evolution/blob/main/proposals/0075-import-test.md>
[SE-0076]: <https://github.com/apple/swift-evolution/blob/main/proposals/0076-copying-to-unsafe-mutable-pointer-with-unsafe-pointer-source.md>
[SE-0077]: <https://github.com/apple/swift-evolution/blob/main/proposals/0077-operator-precedence.md>
[SE-0078]: <https://github.com/apple/swift-evolution/blob/main/proposals/0078-rotate-algorithm.md>
[SE-0079]: <https://github.com/apple/swift-evolution/blob/main/proposals/0079-upgrade-self-from-weak-to-strong.md>
[SE-0080]: <https://github.com/apple/swift-evolution/blob/main/proposals/0080-failable-numeric-initializers.md>
[SE-0081]: <https://github.com/apple/swift-evolution/blob/main/proposals/0081-move-where-expression.md>
[SE-0082]: <https://github.com/apple/swift-evolution/blob/main/proposals/0082-swiftpm-package-edit.md>
[SE-0083]: <https://github.com/apple/swift-evolution/blob/main/proposals/0083-remove-bridging-from-dynamic-casts.md>
[SE-0084]: <https://github.com/apple/swift-evolution/blob/main/proposals/0084-trailing-commas.md>
[SE-0085]: <https://github.com/apple/swift-evolution/blob/main/proposals/0085-package-manager-command-name.md>
[SE-0086]: <https://github.com/apple/swift-evolution/blob/main/proposals/0086-drop-foundation-ns.md>
[SE-0087]: <https://github.com/apple/swift-evolution/blob/main/proposals/0087-lazy-attribute.md>
[SE-0088]: <https://github.com/apple/swift-evolution/blob/main/proposals/0088-libdispatch-for-swift3.md>
[SE-0089]: <https://github.com/apple/swift-evolution/blob/main/proposals/0089-rename-string-reflection-init.md>
[SE-0090]: <https://github.com/apple/swift-evolution/blob/main/proposals/0090-remove-dot-self.md>
[SE-0091]: <https://github.com/apple/swift-evolution/blob/main/proposals/0091-improving-operators-in-protocols.md>
[SE-0092]: <https://github.com/apple/swift-evolution/blob/main/proposals/0092-typealiases-in-protocols.md>
[SE-0093]: <https://github.com/apple/swift-evolution/blob/main/proposals/0093-slice-base.md>
[SE-0094]: <https://github.com/apple/swift-evolution/blob/main/proposals/0094-sequence-function.md>
[SE-0095]: <https://github.com/apple/swift-evolution/blob/main/proposals/0095-any-as-existential.md>
[SE-0096]: <https://github.com/apple/swift-evolution/blob/main/proposals/0096-dynamictype.md>
[SE-0097]: <https://github.com/apple/swift-evolution/blob/main/proposals/0097-negative-attributes.md>
[SE-0098]: <https://github.com/apple/swift-evolution/blob/main/proposals/0098-didset-capitalization.md>
[SE-0099]: <https://github.com/apple/swift-evolution/blob/main/proposals/0099-conditionclauses.md>
[SE-0100]: <https://github.com/apple/swift-evolution/blob/main/proposals/0100-add-sequence-based-init-and-merge-to-dictionary.md>
[SE-0101]: <https://github.com/apple/swift-evolution/blob/main/proposals/0101-standardizing-sizeof-naming.md>
[SE-0102]: <https://github.com/apple/swift-evolution/blob/main/proposals/0102-noreturn-bottom-type.md>
[SE-0103]: <https://github.com/apple/swift-evolution/blob/main/proposals/0103-make-noescape-default.md>
[SE-0104]: <https://github.com/apple/swift-evolution/blob/main/proposals/0104-improved-integers.md>
[SE-0105]: <https://github.com/apple/swift-evolution/blob/main/proposals/0105-remove-where-from-forin-loops.md>
[SE-0106]: <https://github.com/apple/swift-evolution/blob/main/proposals/0106-rename-osx-to-macos.md>
[SE-0107]: <https://github.com/apple/swift-evolution/blob/main/proposals/0107-unsaferawpointer.md>
[SE-0108]: <https://github.com/apple/swift-evolution/blob/main/proposals/0108-remove-assoctype-inference.md>
[SE-0109]: <https://github.com/apple/swift-evolution/blob/main/proposals/0109-remove-boolean.md>
[SE-0110]: <https://github.com/apple/swift-evolution/blob/main/proposals/0110-distinguish-single-tuple-arg.md>
[SE-0111]: <https://github.com/apple/swift-evolution/blob/main/proposals/0111-remove-arg-label-type-significance.md>
[SE-0112]: <https://github.com/apple/swift-evolution/blob/main/proposals/0112-nserror-bridging.md>
[SE-0113]: <https://github.com/apple/swift-evolution/blob/main/proposals/0113-rounding-functions-on-floatingpoint.md>
[SE-0114]: <https://github.com/apple/swift-evolution/blob/main/proposals/0114-buffer-naming.md>
[SE-0115]: <https://github.com/apple/swift-evolution/blob/main/proposals/0115-literal-syntax-protocols.md>
[SE-0116]: <https://github.com/apple/swift-evolution/blob/main/proposals/0116-id-as-any.md>
[SE-0117]: <https://github.com/apple/swift-evolution/blob/main/proposals/0117-non-public-subclassable-by-default.md>
[SE-0118]: <https://github.com/apple/swift-evolution/blob/main/proposals/0118-closure-parameter-names-and-labels.md>
[SE-0119]: <https://github.com/apple/swift-evolution/blob/main/proposals/0119-extensions-access-modifiers.md>
[SE-0120]: <https://github.com/apple/swift-evolution/blob/main/proposals/0120-revise-partition-method.md>
[SE-0121]: <https://github.com/apple/swift-evolution/blob/main/proposals/0121-remove-optional-comparison-operators.md>
[SE-0122]: <https://github.com/apple/swift-evolution/blob/main/proposals/0122-use-colons-for-subscript-type-declarations.md>
[SE-0123]: <https://github.com/apple/swift-evolution/blob/main/proposals/0123-disallow-value-to-optional-coercion-in-operator-arguments.md>
[SE-0124]: <https://github.com/apple/swift-evolution/blob/main/proposals/0124-bitpattern-label-for-int-initializer-objectidentfier.md>
[SE-0125]: <https://github.com/apple/swift-evolution/blob/main/proposals/0125-remove-nonobjectivecbase.md>
[SE-0126]: <https://github.com/apple/swift-evolution/blob/main/proposals/0126-refactor-metatypes-repurpose-t-dot-self-and-mirror.md>
[SE-0127]: <https://github.com/apple/swift-evolution/blob/main/proposals/0127-cleaning-up-stdlib-ptr-buffer.md>
[SE-0128]: <https://github.com/apple/swift-evolution/blob/main/proposals/0128-unicodescalar-failable-initializer.md>
[SE-0129]: <https://github.com/apple/swift-evolution/blob/main/proposals/0129-package-manager-test-naming-conventions.md>
[SE-0130]: <https://github.com/apple/swift-evolution/blob/main/proposals/0130-string-initializers-cleanup.md>
[SE-0131]: <https://github.com/apple/swift-evolution/blob/main/proposals/0131-anyhashable.md>
[SE-0132]: <https://github.com/apple/swift-evolution/blob/main/proposals/0132-sequence-end-ops.md>
[SE-0133]: <https://github.com/apple/swift-evolution/blob/main/proposals/0133-rename-flatten-to-joined.md>
[SE-0134]: <https://github.com/apple/swift-evolution/blob/main/proposals/0134-rename-string-properties.md>
[SE-0135]: <https://github.com/apple/swift-evolution/blob/main/proposals/0135-package-manager-support-for-differentiating-packages-by-swift-version.md>
[SE-0136]: <https://github.com/apple/swift-evolution/blob/main/proposals/0136-memory-layout-of-values.md>
[SE-0137]: <https://github.com/apple/swift-evolution/blob/main/proposals/0137-avoiding-lock-in.md>
[SE-0138]: <https://github.com/apple/swift-evolution/blob/main/proposals/0138-unsaferawbufferpointer.md>
[SE-0139]: <https://github.com/apple/swift-evolution/blob/main/proposals/0139-bridge-nsnumber-and-nsvalue.md>
[SE-0140]: <https://github.com/apple/swift-evolution/blob/main/proposals/0140-bridge-optional-to-nsnull.md>
[SE-0141]: <https://github.com/apple/swift-evolution/blob/main/proposals/0141-available-by-swift-version.md>
[SE-0142]: <https://github.com/apple/swift-evolution/blob/main/proposals/0142-associated-types-constraints.md>
[SE-0143]: <https://github.com/apple/swift-evolution/blob/main/proposals/0143-conditional-conformances.md>
[SE-0144]: <https://github.com/apple/swift-evolution/blob/main/proposals/0144-allow-single-dollar-sign-as-valid-identifier.md>
[SE-0145]: <https://github.com/apple/swift-evolution/blob/main/proposals/0145-package-manager-version-pinning.md>
[SE-0146]: <https://github.com/apple/swift-evolution/blob/main/proposals/0146-package-manager-product-definitions.md>
[SE-0147]: <https://github.com/apple/swift-evolution/blob/main/proposals/0147-move-unsafe-initialize-from.md>
[SE-0148]: <https://github.com/apple/swift-evolution/blob/main/proposals/0148-generic-subscripts.md>
[SE-0149]: <https://github.com/apple/swift-evolution/blob/main/proposals/0149-package-manager-top-of-tree.md>
[SE-0150]: <https://github.com/apple/swift-evolution/blob/main/proposals/0150-package-manager-branch-support.md>
[SE-0151]: <https://github.com/apple/swift-evolution/blob/main/proposals/0151-package-manager-swift-language-compatibility-version.md>
[SE-0152]: <https://github.com/apple/swift-evolution/blob/main/proposals/0152-package-manager-tools-version.md>
[SE-0153]: <https://github.com/apple/swift-evolution/blob/main/proposals/0153-compensate-for-the-inconsistency-of-nscopyings-behaviour.md>
[SE-0154]: <https://github.com/apple/swift-evolution/blob/main/proposals/0154-dictionary-key-and-value-collections.md>
[SE-0155]: <https://github.com/apple/swift-evolution/blob/main/proposals/0155-normalize-enum-case-representation.md>
[SE-0156]: <https://github.com/apple/swift-evolution/blob/main/proposals/0156-subclass-existentials.md>
[SE-0157]: <https://github.com/apple/swift-evolution/blob/main/proposals/0157-recursive-protocol-constraints.md>
[SE-0158]: <https://github.com/apple/swift-evolution/blob/main/proposals/0158-package-manager-manifest-api-redesign.md>
[SE-0159]: <https://github.com/apple/swift-evolution/blob/main/proposals/0159-fix-private-access-levels.md>
[SE-0160]: <https://github.com/apple/swift-evolution/blob/main/proposals/0160-objc-inference.md>
[SE-0161]: <https://github.com/apple/swift-evolution/blob/main/proposals/0161-key-paths.md>
[SE-0162]: <https://github.com/apple/swift-evolution/blob/main/proposals/0162-package-manager-custom-target-layouts.md>
[SE-0163]: <https://github.com/apple/swift-evolution/blob/main/proposals/0163-string-revision-1.md>
[SE-0164]: <https://github.com/apple/swift-evolution/blob/main/proposals/0164-remove-final-support-in-protocol-extensions.md>
[SE-0165]: <https://github.com/apple/swift-evolution/blob/main/proposals/0165-dict.md>
[SE-0166]: <https://github.com/apple/swift-evolution/blob/main/proposals/0166-swift-archival-serialization.md>
[SE-0167]: <https://github.com/apple/swift-evolution/blob/main/proposals/0167-swift-encoders.md>
[SE-0168]: <https://github.com/apple/swift-evolution/blob/main/proposals/0168-multi-line-string-literals.md>
[SE-0169]: <https://github.com/apple/swift-evolution/blob/main/proposals/0169-improve-interaction-between-private-declarations-and-extensions.md>
[SE-0170]: <https://github.com/apple/swift-evolution/blob/main/proposals/0170-nsnumber_bridge.md>
[SE-0171]: <https://github.com/apple/swift-evolution/blob/main/proposals/0171-reduce-with-inout.md>
[SE-0172]: <https://github.com/apple/swift-evolution/blob/main/proposals/0172-one-sided-ranges.md>
[SE-0173]: <https://github.com/apple/swift-evolution/blob/main/proposals/0173-swap-indices.md>
[SE-0174]: <https://github.com/apple/swift-evolution/blob/main/proposals/0174-filter-range-replaceable.md>
[SE-0175]: <https://github.com/apple/swift-evolution/blob/main/proposals/0175-package-manager-revised-dependency-resolution.md>
[SE-0176]: <https://github.com/apple/swift-evolution/blob/main/proposals/0176-enforce-exclusive-access-to-memory.md>
[SE-0177]: <https://github.com/apple/swift-evolution/blob/main/proposals/0177-add-clamped-to-method.md>
[SE-0178]: <https://github.com/apple/swift-evolution/blob/main/proposals/0178-character-unicode-view.md>
[SE-0179]: <https://github.com/apple/swift-evolution/blob/main/proposals/0179-swift-run-command.md>
[SE-0180]: <https://github.com/apple/swift-evolution/blob/main/proposals/0180-string-index-overhaul.md>
[SE-0181]: <https://github.com/apple/swift-evolution/blob/main/proposals/0181-package-manager-cpp-language-version.md>
[SE-0182]: <https://github.com/apple/swift-evolution/blob/main/proposals/0182-newline-escape-in-strings.md>
[SE-0183]: <https://github.com/apple/swift-evolution/blob/main/proposals/0183-substring-affordances.md>
[SE-0184]: <https://github.com/apple/swift-evolution/blob/main/proposals/0184-unsafe-pointers-add-missing.md>
[SE-0185]: <https://github.com/apple/swift-evolution/blob/main/proposals/0185-synthesize-equatable-hashable.md>
[SE-0186]: <https://github.com/apple/swift-evolution/blob/main/proposals/0186-remove-ownership-keyword-support-in-protocols.md>
[SE-0187]: <https://github.com/apple/swift-evolution/blob/main/proposals/0187-introduce-filtermap.md>
[SE-0188]: <https://github.com/apple/swift-evolution/blob/main/proposals/0188-stdlib-index-types-hashable.md>
[SE-0189]: <https://github.com/apple/swift-evolution/blob/main/proposals/0189-restrict-cross-module-struct-initializers.md>
[SE-0190]: <https://github.com/apple/swift-evolution/blob/main/proposals/0190-target-environment-platform-condition.md>
[SE-0191]: <https://github.com/apple/swift-evolution/blob/main/proposals/0191-eliminate-indexdistance.md>
[SE-0192]: <https://github.com/apple/swift-evolution/blob/main/proposals/0192-non-exhaustive-enums.md>
[SE-0193]: <https://github.com/apple/swift-evolution/blob/main/proposals/0193-cross-module-inlining-and-specialization.md>
[SE-0194]: <https://github.com/apple/swift-evolution/blob/main/proposals/0194-derived-collection-of-enum-cases.md>
[SE-0195]: <https://github.com/apple/swift-evolution/blob/main/proposals/0195-dynamic-member-lookup.md>
[SE-0196]: <https://github.com/apple/swift-evolution/blob/main/proposals/0196-diagnostic-directives.md>
[SE-0197]: <https://github.com/apple/swift-evolution/blob/main/proposals/0197-remove-where.md>
[SE-0198]: <https://github.com/apple/swift-evolution/blob/main/proposals/0198-playground-quicklook-api-revamp.md>
[SE-0199]: <https://github.com/apple/swift-evolution/blob/main/proposals/0199-bool-toggle.md>
[SE-0200]: <https://github.com/apple/swift-evolution/blob/main/proposals/0200-raw-string-escaping.md>
[SE-0201]: <https://github.com/apple/swift-evolution/blob/main/proposals/0201-package-manager-local-dependencies.md>
[SE-0202]: <https://github.com/apple/swift-evolution/blob/main/proposals/0202-random-unification.md>
[SE-0203]: <https://github.com/apple/swift-evolution/blob/main/proposals/0203-rename-sequence-elements-equal.md>
[SE-0204]: <https://github.com/apple/swift-evolution/blob/main/proposals/0204-add-last-methods.md>
[SE-0205]: <https://github.com/apple/swift-evolution/blob/main/proposals/0205-withUnsafePointer-for-lets.md>
[SE-0206]: <https://github.com/apple/swift-evolution/blob/main/proposals/0206-hashable-enhancements.md>
[SE-0207]: <https://github.com/apple/swift-evolution/blob/main/proposals/0207-containsOnly.md>
[SE-0208]: <https://github.com/apple/swift-evolution/blob/main/proposals/0208-package-manager-system-library-targets.md>
[SE-0209]: <https://github.com/apple/swift-evolution/blob/main/proposals/0209-package-manager-swift-lang-version-update.md>
[SE-0210]: <https://github.com/apple/swift-evolution/blob/main/proposals/0210-key-path-offset.md>
[SE-0211]: <https://github.com/apple/swift-evolution/blob/main/proposals/0211-unicode-scalar-properties.md>
[SE-0212]: <https://github.com/apple/swift-evolution/blob/main/proposals/0212-compiler-version-directive.md>
[SE-0213]: <https://github.com/apple/swift-evolution/blob/main/proposals/0213-literal-init-via-coercion.md>
[SE-0214]: <https://github.com/apple/swift-evolution/blob/main/proposals/0214-DictionaryLiteral.md>
[SE-0215]: <https://github.com/apple/swift-evolution/blob/main/proposals/0215-conform-never-to-hashable-and-equatable.md>
[SE-0216]: <https://github.com/apple/swift-evolution/blob/main/proposals/0216-dynamic-callable.md>
[SE-0217]: <https://github.com/apple/swift-evolution/blob/main/proposals/0217-bangbang.md>
[SE-0218]: <https://github.com/apple/swift-evolution/blob/main/proposals/0218-introduce-compact-map-values.md>
[SE-0219]: <https://github.com/apple/swift-evolution/blob/main/proposals/0219-package-manager-dependency-mirroring.md>
[SE-0220]: <https://github.com/apple/swift-evolution/blob/main/proposals/0220-count-where.md>
[SE-0221]: <https://github.com/apple/swift-evolution/blob/main/proposals/0221-character-properties.md>
[SE-0222]: <https://github.com/apple/swift-evolution/blob/main/proposals/0222-lazy-compactmap-sequence.md>
[SE-0223]: <https://github.com/apple/swift-evolution/blob/main/proposals/0223-array-uninitialized-initializer.md>
[SE-0224]: <https://github.com/apple/swift-evolution/blob/main/proposals/0224-ifswift-lessthan-operator.md>
[SE-0225]: <https://github.com/apple/swift-evolution/blob/main/proposals/0225-binaryinteger-iseven-isodd-ismultiple.md>
[SE-0226]: <https://github.com/apple/swift-evolution/blob/main/proposals/0226-package-manager-target-based-dep-resolution.md>
[SE-0227]: <https://github.com/apple/swift-evolution/blob/main/proposals/0227-identity-keypath.md>
[SE-0228]: <https://github.com/apple/swift-evolution/blob/main/proposals/0228-fix-expressiblebystringinterpolation.md>
[SE-0230]: <https://github.com/apple/swift-evolution/blob/main/proposals/0230-flatten-optional-try.md>
[SE-0235]: <https://github.com/apple/swift-evolution/blob/main/proposals/0235-add-result.md>
[SE-0242]: <https://github.com/apple/swift-evolution/blob/main/proposals/0242-default-values-memberwise.md>
[SE-0244]: <https://github.com/apple/swift-evolution/blob/main/proposals/0244-opaque-result-types.md>
[SE-0245]: <https://github.com/apple/swift-evolution/blob/main/proposals/0245-array-uninitialized-initializer.md>
[SE-0249]: <https://github.com/apple/swift-evolution/blob/main/proposals/0249-key-path-literal-function-expressions.md>
[SE-0252]: <https://github.com/apple/swift-evolution/blob/main/proposals/0252-keypath-dynamic-member-lookup.md>
[SE-0253]: <https://github.com/apple/swift-evolution/blob/main/proposals/0253-callable.md>
[SE-0254]: <https://github.com/apple/swift-evolution/blob/main/proposals/0254-static-subscripts.md>
[SE-0266]: <https://github.com/apple/swift-evolution/blob/main/proposals/0266-synthesized-comparable-for-enumerations.md>
[SE-0267]: <https://github.com/apple/swift-evolution/blob/main/proposals/0267-where-on-contextually-generic.md>
[SE-0268]: <https://github.com/apple/swift-evolution/blob/main/proposals/0268-didset-semantics.md>
[SE-0269]: <https://github.com/apple/swift-evolution/blob/main/proposals/0269-implicit-self-explicit-capture.md>
[SE-0270]: <https://github.com/apple/swift-evolution/blob/main/proposals/0270-rangeset-and-collection-operations.md>
[SE-0274]: <https://github.com/apple/swift-evolution/blob/main/proposals/0274-magic-file.md>
[SE-0276]: <https://github.com/apple/swift-evolution/blob/main/proposals/0276-multi-pattern-catch-clauses.md>
[SE-0279]: <https://github.com/apple/swift-evolution/blob/main/proposals/0279-multiple-trailing-closures.md>
[SE-0280]: <https://github.com/apple/swift-evolution/blob/main/proposals/0280-enum-cases-as-protocol-witnesses.md>
[SE-0284]: <https://github.com/apple/swift-evolution/blob/main/proposals/0284-multiple-variadic-parameters.md>
[SE-0286]: <https://github.com/apple/swift-evolution/blob/main/proposals/0286-forward-scan-trailing-closures.md>
[SE-0287]: <https://github.com/apple/swift-evolution/blob/main/proposals/0287-implicit-member-chains.md>
[SE-0290]: <https://github.com/apple/swift-evolution/blob/main/proposals/0290-negative-availability.md>
[SE-0293]: <https://github.com/apple/swift-evolution/blob/main/proposals/0293-extend-property-wrappers-to-function-and-closure-parameters.md>
[SE-0296]: <https://github.com/apple/swift-evolution/blob/main/proposals/0296-async-await.md>
[SE-0297]: <https://github.com/apple/swift-evolution/blob/main/proposals/0297-concurrency-objc.md>
[SE-0298]: <https://github.com/apple/swift-evolution/blob/main/proposals/0298-asyncsequence.md>
[SE-0299]: <https://github.com/apple/swift-evolution/blob/main/proposals/0299-extend-generic-static-member-lookup.md>
[SE-0300]: <https://github.com/apple/swift-evolution/blob/main/proposals/0300-continuation.md>
[SE-0302]: <https://github.com/apple/swift-evolution/blob/main/proposals/0302-concurrent-value-and-concurrent-closures.md>
[SE-0306]: <https://github.com/apple/swift-evolution/blob/main/proposals/0306-actors.md>
[SE-0309]: <https://github.com/apple/swift-evolution/blob/main/proposals/0309-unlock-existential-types-for-all-protocols.md>
[SE-0310]: <https://github.com/apple/swift-evolution/blob/main/proposals/0310-effectful-readonly-properties.md>
[SE-0311]: <https://github.com/apple/swift-evolution/blob/main/proposals/0311-task-locals.md>
[SE-0313]: <https://github.com/apple/swift-evolution/blob/main/proposals/0313-actor-isolation-control.md>
[SE-0315]: <https://github.com/apple/swift-evolution/blob/main/proposals/0315-placeholder-types.md>
[SE-0316]: <https://github.com/apple/swift-evolution/blob/main/proposals/0316-global-actors.md>
[SE-0320]: <https://github.com/apple/swift-evolution/blob/main/proposals/0320-codingkeyrepresentable.md>
[SE-0322]: <https://github.com/apple/swift-evolution/blob/main/proposals/0322-temporary-buffers.md>
[SE-0323]: <https://github.com/apple/swift-evolution/blob/main/proposals/0323-async-main-semantics.md>
[SE-0324]: <https://github.com/apple/swift-evolution/blob/main/proposals/0324-c-lang-pointer-arg-conversion.md>
[SE-0326]: <https://github.com/apple/swift-evolution/blob/main/proposals/0326-extending-multi-statement-closure-inference.md>
[SE-0327]: <https://github.com/apple/swift-evolution/blob/main/proposals/0327-actor-initializers.md>
[SE-0328]: <https://github.com/apple/swift-evolution/blob/main/proposals/0328-structural-opaque-result-types.md>
[SE-0329]: <https://github.com/apple/swift-evolution/blob/main/proposals/0329-clock-instant-duration.md>
[SE-0331]: <https://github.com/apple/swift-evolution/blob/main/proposals/0331-remove-sendable-from-unsafepointer.md>
[SE-0333]: <https://github.com/apple/swift-evolution/blob/main/proposals/0333-with-memory-rebound.md>
[SE-0334]: <https://github.com/apple/swift-evolution/blob/main/proposals/0334-pointer-usability-improvements.md>
[SE-0335]: <https://github.com/apple/swift-evolution/blob/main/proposals/0335-existential-any.md>
[SE-0336]: <https://github.com/apple/swift-evolution/blob/main/proposals/0336-distributed-actor-isolation.md>
[SE-0337]: <https://github.com/apple/swift-evolution/blob/main/proposals/0337-support-incremental-migration-to-concurrency-checking.md>
[SE-0338]: <https://github.com/apple/swift-evolution/blob/main/proposals/0338-clarify-execution-non-actor-async.md>
[SE-0340]: <https://github.com/apple/swift-evolution/blob/main/proposals/0340-swift-noasync.md>
[SE-0341]: <https://github.com/apple/swift-evolution/blob/main/proposals/0341-opaque-parameters.md>
[SE-0343]: <https://github.com/apple/swift-evolution/blob/main/proposals/0343-top-level-concurrency.md>
[SE-0345]: <https://github.com/apple/swift-evolution/blob/main/proposals/0345-if-let-shorthand.md>
[SE-0346]: <https://github.com/apple/swift-evolution/blob/main/proposals/0346-light-weight-same-type-syntax.md>
[SE-0347]: <https://github.com/apple/swift-evolution/blob/main/proposals/0347-type-inference-from-default-exprs.md>
[SE-0349]: <https://github.com/apple/swift-evolution/blob/main/proposals/0349-unaligned-loads-and-stores.md>
[SE-0350]: <https://github.com/apple/swift-evolution/blob/main/proposals/0350-regex-type-overview.md>
[SE-0352]: <https://github.com/apple/swift-evolution/blob/main/proposals/0352-implicit-open-existentials.md>
[SE-0353]: <https://github.com/apple/swift-evolution/blob/main/proposals/0353-constrained-existential-types.md>
[SE-0354]: <https://github.com/apple/swift-evolution/blob/main/proposals/0354-regex-literals.md>
[SE-0355]: <https://github.com/apple/swift-evolution/blob/main/proposals/0355-regex-syntax-run-time-construction.md>
[SE-0357]: <https://github.com/apple/swift-evolution/blob/main/proposals/0357-regex-string-processing-algorithms.md>
[SE-0358]: <https://github.com/apple/swift-evolution/blob/main/proposals/0358-primary-associated-types-in-stdlib.md>
[SE-0362]: <https://github.com/apple/swift-evolution/blob/main/proposals/0362-piecemeal-future-features.md>
[SE-0365]: <https://github.com/apple/swift-evolution/blob/main/proposals/0365-implicit-self-weak-capture.md>
[SE-0366]: <https://github.com/apple/swift-evolution/blob/main/proposals/0366-move-function.md>
[SE-0370]: <https://github.com/apple/swift-evolution/blob/main/proposals/0370-pointer-family-initialization-improvements.md>
[SE-0376]: <https://github.com/apple/swift-evolution/blob/main/proposals/0376-function-back-deployment.md>
[SE-0377]: <https://github.com/apple/swift-evolution/blob/main/proposals/0377-parameter-ownership-modifiers.md>
[SE-0380]: <https://github.com/apple/swift-evolution/blob/main/proposals/0380-if-switch-expressions.md>
[SE-0382]: https://github.com/apple/swift-evolution/blob/main/proposals/0382-expression-macros.md
[SE-0389]: https://github.com/apple/swift-evolution/blob/main/proposals/0389-attached-macros.md
[SE-0394]: https://github.com/apple/swift-evolution/blob/main/proposals/0394-swiftpm-expression-macros.md
[SE-0397]: https://github.com/apple/swift-evolution/blob/main/proposals/0397-freestanding-declaration-macros.md
[SE-0407]: https://github.com/apple/swift-evolution/blob/main/proposals/0407-member-macro-conformances.md
[SE-0408]: https://github.com/apple/swift-evolution/blob/main/proposals/0408-pack-iteration.md
[SE-0411]: https://github.com/apple/swift-evolution/blob/main/proposals/0411-isolated-default-values.md
[SE-0417]: https://github.com/apple/swift-evolution/blob/main/proposals/0417-task-executor-preference.md
[SE-0412]: https://github.com/apple/swift-evolution/blob/main/proposals/0412-strict-concurrency-for-global-variables.md
[SE-0413]: https://github.com/apple/swift-evolution/blob/main/proposals/0413-typed-throws.md
[SE-0422]: https://github.com/apple/swift-evolution/blob/main/proposals/0422-caller-side-default-argument-macro-expression.md
[#64927]: <https://github.com/apple/swift/issues/64927>
[#42697]: <https://github.com/apple/swift/issues/42697>
[#42728]: <https://github.com/apple/swift/issues/42728>
[#43036]: <https://github.com/apple/swift/issues/43036>
[#43248]: <https://github.com/apple/swift/issues/43248>
[#43310]: <https://github.com/apple/swift/issues/43310>
[#43621]: <https://github.com/apple/swift/issues/43621>
[#44055]: <https://github.com/apple/swift/issues/44055>
[#44138]: <https://github.com/apple/swift/issues/44138>
[#44739]: <https://github.com/apple/swift/issues/44739>
[#44784]: <https://github.com/apple/swift/issues/44784>
[#44797]: <https://github.com/apple/swift/issues/44797>
[#44995]: <https://github.com/apple/swift/issues/44995>
[#45001]: <https://github.com/apple/swift/issues/45001>
[#45213]: <https://github.com/apple/swift/issues/45213>
[#45277]: <https://github.com/apple/swift/issues/45277>
[#45293]: <https://github.com/apple/swift/issues/45293>
[apple/swift-corelibs-foundation#4326]: <https://github.com/apple/swift-corelibs-foundation/issues/4326>
[#46789]: <https://github.com/apple/swift/issues/46789>
[#46831]: <https://github.com/apple/swift/issues/46831>
[#48153]: <https://github.com/apple/swift/issues/48153>
[#48289]: <https://github.com/apple/swift/issues/48289>
[#48673]: <https://github.com/apple/swift/issues/48673>
[#49631]: <https://github.com/apple/swift/issues/49631>
[#49687]: <https://github.com/apple/swift/issues/49687>
[#49799]: <https://github.com/apple/swift/issues/49799>
[#50143]: <https://github.com/apple/swift/issues/50143>
[#50338]: <https://github.com/apple/swift/issues/50338>
[#50641]: <https://github.com/apple/swift/issues/50641>
[#51064]: <https://github.com/apple/swift/issues/51064>
[#51478]: <https://github.com/apple/swift/issues/51478>
[#51546]: <https://github.com/apple/swift/issues/51546>
[#52244]: <https://github.com/apple/swift/issues/52244>
[#52471]: <https://github.com/apple/swift/issues/52471>
[#53699]: <https://github.com/apple/swift/issues/53699>
[#53830]: <https://github.com/apple/swift/issues/53830>
[#54108]: <https://github.com/apple/swift/issues/54108>
[#54246]: <https://github.com/apple/swift/issues/54246>
[#57081]: <https://github.com/apple/swift/issues/57081>
[#57225]: <https://github.com/apple/swift/issues/57225>
[#56139]: <https://github.com/apple/swift/issues/56139>
[#70065]: <https://github.com/apple/swift/pull/70065>
[#71075]: <https://github.com/apple/swift/pull/71075>
[swift-syntax]: https://github.com/apple/swift-syntax
Computing file changes ...