| 3a1c117 | Philipp Zabel | 03 May 2016, 12:39:29 UTC | drm/imx: parallel-display: use of_graph_get_endpoint_by_regs helper Instead of using of_graph_get_port_by_id() to get the port and then of_get_child_by_name() to get the first endpoint, get to the endpoint in a single step. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> | 30 May 2016, 07:14:00 UTC |
| 620011e | Philipp Zabel | 03 May 2016, 12:37:13 UTC | drm/imx: imx-ldb: use of_graph_get_endpoint_by_regs helper Instead of using of_graph_get_port_by_id() to get the port and then of_get_child_by_name() to get the first endpoint, get to the endpoint in a single step. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> | 30 May 2016, 07:14:00 UTC |
| ee89686 | Akshay Bhat | 27 April 2016, 20:23:34 UTC | dt-bindings: imx: ldb: Add ddc-i2c-bus property Document the ddc-i2c-bus property used by imx-ldb driver to read EDID information via I2C interface. Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> | 30 May 2016, 07:14:00 UTC |
| a6d206e | Steve Longerbeam | 27 April 2016, 20:23:33 UTC | drm/imx: imx-ldb: Add DDC support Add support for reading EDID over Display Data Channel. If no DDC adapter is available, falls back to hardcoded EDID or display-timings node as before. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> | 30 May 2016, 07:14:00 UTC |
| 0e6b525 | Shmulik Ladkani | 26 May 2016, 17:16:36 UTC | net: l2tp: Make l2tp_ip6 namespace aware l2tp_ip6 tunnel and session lookups were still using init_net, although the l2tp core infrastructure already supports lookups keyed by 'net'. As a result, l2tp_ip6_recv discarded packets for tunnels/sessions created in namespaces other than the init_net. Fix, by using dev_net(skb->dev) or sock_net(sk) where appropriate. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 May 2016, 07:03:53 UTC |
| 176b346 | Eric Garver | 26 May 2016, 16:28:05 UTC | Documentation: ip-sysctl.txt: clarify secure_redirects Clarify how secure_redirects works. Mention that RFC1122 always applies. Signed-off-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 May 2016, 05:40:53 UTC |
| 68bb399 | Edward Cree | 26 May 2016, 20:46:05 UTC | sfc: use flow dissector helpers for aRFS Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 May 2016, 05:38:55 UTC |
| 421eeea | Baozeng Ding | 26 May 2016, 13:07:42 UTC | ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr Fix a logic error to avoid potential null pointer dereference. Signed-off-by: Baozeng Ding <sploving1@gmail.com> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 May 2016, 05:36:25 UTC |
| 8665165 | Elad Kanfi | 26 May 2016, 12:00:06 UTC | net: nps_enet: Disable interrupts before napi reschedule Since NAPI works by shutting down event interrupts when theres work and turning them on when theres none, the net driver must make sure that interrupts are disabled when it reschedules polling. By calling napi_reschedule, the driver switches to polling mode, therefor there should be no interrupt interference. Any received packets will be handled in nps_enet_poll by polling the HW indication of received packet until all packets are handled. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 May 2016, 05:35:21 UTC |
| 0d08df6 | Andy Shevchenko | 26 May 2016, 11:43:52 UTC | net/lapb: tuse %*ph to dump buffers Use %*ph specifier to dump small buffers in hex format instead doing this byte-by-byte. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 May 2016, 05:33:25 UTC |
| 6756325 | Dan Carpenter | 26 May 2016, 06:46:22 UTC | ptp: oops in ptp_ioctl() If we pass ERR_PTR(-EFAULT) to kfree() then it's going to oops. Fixes: 2ece068e1b1d ('ptp: use memdup_user().') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 May 2016, 05:32:27 UTC |
| fabb13d | Arnd Bergmann | 25 May 2016, 14:50:46 UTC | fou: add Kconfig options for IPv6 support A previous patch added the fou6.ko module, but that failed to link in a couple of configurations: net/built-in.o: In function `ip6_tnl_encap_add_fou_ops': net/ipv6/fou6.c:88: undefined reference to `ip6_tnl_encap_add_ops' net/ipv6/fou6.c:94: undefined reference to `ip6_tnl_encap_add_ops' net/ipv6/fou6.c:97: undefined reference to `ip6_tnl_encap_del_ops' net/built-in.o: In function `ip6_tnl_encap_del_fou_ops': net/ipv6/fou6.c:106: undefined reference to `ip6_tnl_encap_del_ops' net/ipv6/fou6.c:107: undefined reference to `ip6_tnl_encap_del_ops' If CONFIG_IPV6=m, ip6_tnl_encap_add_ops/ip6_tnl_encap_del_ops are in a module, but fou6.c can still be built-in, and that obviously fails to link. Also, if CONFIG_IPV6=y, but CONFIG_IPV6_TUNNEL=m or CONFIG_IPV6_TUNNEL=n, the same problem happens for a different reason. This adds two new silent Kconfig symbols to work around both problems: - CONFIG_IPV6_FOU is now always set to 'm' if either CONFIG_NET_FOU=m or CONFIG_IPV6=m - CONFIG_IPV6_FOU_TUNNEL is set implicitly when IPV6_FOU is enabled and NET_FOU_IP_TUNNELS is also turned out, and it will ensure that CONFIG_IPV6_TUNNEL is also available. The options could be made user-visible as well, to give additional room for configuration, but it seems easier not to bother users with more choice here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels") Signed-off-by: David S. Miller <davem@davemloft.net> | 30 May 2016, 05:24:21 UTC |
| 9791d8e | Arnd Bergmann | 25 May 2016, 14:50:45 UTC | ipv6: hide ip6_encap_hlen/ip6_tnl_encap definitions A recent cleanup moved MAX_IPTUN_ENCAP_OPS along with some other definitions, but it is now invisible when CONFIG_INET is not defined, but still referenced from ip6_tunnel.h: In file included from net/xfrm/xfrm_input.c:17:0: include/net/ip6_tunnel.h:67:17: error: 'MAX_IPTUN_ENCAP_OPS' undeclared here (not in a function) ip6tun_encaps[MAX_IPTUN_ENCAP_OPS]; ^~~~~~~~~~~~~~~~~~~ This hides the ip6_encap_hlen and ip6_tnl_encap functions inside of CONFIG_INET so we don't run into the the problem. Alternatively we could move the macro out of the #ifdef again to restore the previous behavior Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 55c2bc143224 ("net: Cleanup encap items in ip_tunnels.h") Signed-off-by: David S. Miller <davem@davemloft.net> | 30 May 2016, 05:24:21 UTC |
| bd000b8 | Russell Currey | 07 April 2016, 06:28:27 UTC | powerpc/pseries/eeh: Refactor the configure_bridge RTAS tokens The RTAS calls "ibm,configure-pe" and "ibm,configure-bridge" perform the same actions, however the former can skip configuration if unnecessary. The existing code treats them as different tokens even though only one will ever be called. Refactor this by making a single token that is assigned during init. Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 30 May 2016, 03:50:12 UTC |
| 871e178 | Russell Currey | 07 April 2016, 06:28:26 UTC | powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge In the "ibm,configure-pe" and "ibm,configure-bridge" RTAS calls, the spec states that values of 9900-9905 can be returned, indicating that software should delay for 10^x (where x is the last digit, i.e. 990x) milliseconds and attempt the call again. Currently, the kernel doesn't know about this, and respecting it fixes some PCI failures when the hypervisor is busy. The delay is capped at 0.2 seconds. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 30 May 2016, 03:50:04 UTC |
| 7cafc0b | David S. Miller | 29 May 2016, 03:41:12 UTC | sparc64: Fix return from trap window fill crashes. We must handle data access exception as well as memory address unaligned exceptions from return from trap window fill faults, not just normal TLB misses. Otherwise we can get an OOPS that looks like this: ld-linux.so.2(36808): Kernel bad sw trap 5 [#1] CPU: 1 PID: 36808 Comm: ld-linux.so.2 Not tainted 4.6.0 #34 task: fff8000303be5c60 ti: fff8000301344000 task.ti: fff8000301344000 TSTATE: 0000004410001601 TPC: 0000000000a1a784 TNPC: 0000000000a1a788 Y: 00000002 Not tainted TPC: <do_sparc64_fault+0x5c4/0x700> g0: fff8000024fc8248 g1: 0000000000db04dc g2: 0000000000000000 g3: 0000000000000001 g4: fff8000303be5c60 g5: fff800030e672000 g6: fff8000301344000 g7: 0000000000000001 o0: 0000000000b95ee8 o1: 000000000000012b o2: 0000000000000000 o3: 0000000200b9b358 o4: 0000000000000000 o5: fff8000301344040 sp: fff80003013475c1 ret_pc: 0000000000a1a77c RPC: <do_sparc64_fault+0x5bc/0x700> l0: 00000000000007ff l1: 0000000000000000 l2: 000000000000005f l3: 0000000000000000 l4: fff8000301347e98 l5: fff8000024ff3060 l6: 0000000000000000 l7: 0000000000000000 i0: fff8000301347f60 i1: 0000000000102400 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000000000 i6: fff80003013476a1 i7: 0000000000404d4c I7: <user_rtt_fill_fixup+0x6c/0x7c> Call Trace: [0000000000404d4c] user_rtt_fill_fixup+0x6c/0x7c The window trap handlers are slightly clever, the trap table entries for them are composed of two pieces of code. First comes the code that actually performs the window fill or spill trap handling, and then there are three instructions at the end which are for exception processing. The userland register window fill handler is: add %sp, STACK_BIAS + 0x00, %g1; \ ldxa [%g1 + %g0] ASI, %l0; \ mov 0x08, %g2; \ mov 0x10, %g3; \ ldxa [%g1 + %g2] ASI, %l1; \ mov 0x18, %g5; \ ldxa [%g1 + %g3] ASI, %l2; \ ldxa [%g1 + %g5] ASI, %l3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %l4; \ ldxa [%g1 + %g2] ASI, %l5; \ ldxa [%g1 + %g3] ASI, %l6; \ ldxa [%g1 + %g5] ASI, %l7; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i0; \ ldxa [%g1 + %g2] ASI, %i1; \ ldxa [%g1 + %g3] ASI, %i2; \ ldxa [%g1 + %g5] ASI, %i3; \ add %g1, 0x20, %g1; \ ldxa [%g1 + %g0] ASI, %i4; \ ldxa [%g1 + %g2] ASI, %i5; \ ldxa [%g1 + %g3] ASI, %i6; \ ldxa [%g1 + %g5] ASI, %i7; \ restored; \ retry; nop; nop; nop; nop; \ b,a,pt %xcc, fill_fixup_dax; \ b,a,pt %xcc, fill_fixup_mna; \ b,a,pt %xcc, fill_fixup; And the way this works is that if any of those memory accesses generate an exception, the exception handler can revector to one of those final three branch instructions depending upon which kind of exception the memory access took. In this way, the fault handler doesn't have to know if it was a spill or a fill that it's handling the fault for. It just always branches to the last instruction in the parent trap's handler. For example, for a regular fault, the code goes: winfix_trampoline: rdpr %tpc, %g3 or %g3, 0x7c, %g3 wrpr %g3, %tnpc done All window trap handlers are 0x80 aligned, so if we "or" 0x7c into the trap time program counter, we'll get that final instruction in the trap handler. On return from trap, we have to pull the register window in but we do this by hand instead of just executing a "restore" instruction for several reasons. The largest being that from Niagara and onward we simply don't have enough levels in the trap stack to fully resolve all possible exception cases of a window fault when we are already at trap level 1 (which we enter to get ready to return from the original trap). This is executed inline via the FILL_*_RTRAP handlers. rtrap_64.S's code branches directly to these to do the window fill by hand if necessary. Now if you look at them, we'll see at the end: ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; ba,a,pt %xcc, user_rtt_fill_fixup; And oops, all three cases are handled like a fault. This doesn't work because each of these trap types (data access exception, memory address unaligned, and faults) store their auxiliary info in different registers to pass on to the C handler which does the real work. So in the case where the stack was unaligned, the unaligned trap handler sets up the arg registers one way, and then we branched to the fault handler which expects them setup another way. So the FAULT_TYPE_* value ends up basically being garbage, and randomly would generate the backtrace seen above. Reported-by: Nick Alcock <nix@esperi.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 May 2016, 01:55:54 UTC |
| b02b1fb | Linus Torvalds | 29 May 2016, 20:28:39 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of four fixes noticed in the merge window. The aacraid one is an optimisation, the mp3sas one fixes a spurious printk, the sd_check_events one fixes a theoretical race and the failed zero length commands fixes a bug in our completion/retry routines that has been causing problems in the field" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: aacraid: do not activate events on non-SRC adapters mpt3sas: add missing curly braces sd: get disk reference in sd_check_events() scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands | 29 May 2016, 20:28:39 UTC |
| d11c2a0 | David S. Miller | 29 May 2016, 04:21:31 UTC | sparc: Harden signal return frame checks. All signal frames must be at least 16-byte aligned, because that is the alignment we explicitly create when we build signal return stack frames. All stack pointers must be at least 8-byte aligned. Signed-off-by: David S. Miller <davem@davemloft.net> | 29 May 2016, 18:24:05 UTC |
| 1a695a9 | Linus Torvalds | 29 May 2016, 16:29:24 UTC | Linux 4.7-rc1 | 29 May 2016, 16:29:24 UTC |
| e0ab7af | George Spelvin | 29 May 2016, 12:05:56 UTC | hash_string: Fix zero-length case for !DCACHE_WORD_ACCESS The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf22d2 ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 May 2016, 14:33:47 UTC |
| f2a031b | George Spelvin | 29 May 2016, 05:26:41 UTC | Rename other copy of hash_string to hashlen_string The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by: George Spelvin <linux@sciencehorizons.net> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf22d2 ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 May 2016, 05:34:33 UTC |
| 037369b | Mikulas Patocka | 24 May 2016, 20:49:18 UTC | hpfs: implement the show_options method The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 May 2016, 23:50:24 UTC |
| 01d6e08 | Mikulas Patocka | 24 May 2016, 20:48:33 UTC | affs: fix remount failure when there are no options changed Commit c8f33d0bec99 ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0bec99 ("affs: kstrdup() memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 May 2016, 23:50:24 UTC |
| 44d5170 | Mikulas Patocka | 24 May 2016, 20:47:00 UTC | hpfs: fix remount failure when there are no options changed Commit ce657611baf9 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611baf9 ("hpfs: kstrdup() out of memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 May 2016, 23:50:24 UTC |
| 4029632 | Linus Torvalds | 28 May 2016, 23:41:39 UTC | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ... | 28 May 2016, 23:41:39 UTC |
| d66492b | Guenter Roeck | 28 May 2016, 22:26:02 UTC | fs: fix binfmt_aout.c build error Various builds (such as i386:allmodconfig) fail with fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return' fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token [ Oops. My bad, I had stupidly thought that "allmodconfig" covered this on x86-64 too, but it obviously doesn't. Egg on my face. - Linus ] Fixes: 5d22fc25d4fc ("mm: remove more IS_ERR_VALUE abuses") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 May 2016, 23:34:59 UTC |
| 7e0fb73 | Linus Torvalds | 28 May 2016, 23:15:25 UTC | Merge branch 'hash' of git://ftp.sciencehorizons.net/linux Pull string hash improvements from George Spelvin: "This series does several related things: - Makes the dcache hash (fs/namei.c) useful for general kernel use. (Thanks to Bruce for noticing the zero-length corner case) - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the above. - Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two 32-bit multiplies will do well enough. - Rids the world of the bad hash multipliers in hash_32. This finishes the job started in commit 689de1d6ca95 ("Minimal fix-up of bad hashing behavior of hash_64()") The vast majority of Linux architectures have hardware support for 32x32-bit multiply and so derive no benefit from "simplified" multipliers. The few processors that do not (68000, h8/300 and some models of Microblaze) have arch-specific implementations added. Those patches are last in the series. - Overhauls the dcache hash mixing. The patch in commit 0fed3ac866ea ("namei: Improve hash mixing if CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion. Replaced with a much more careful design that's simultaneously faster and better. (My own invention, as there was noting suitable in the literature I could find. Comments welcome!) - Modify the hash_name() loop to skip the initial HASH_MIX(). This would let us salt the hash if we ever wanted to. - Sort out partial_name_hash(). The hash function is declared as using a long state, even though it's truncated to 32 bits at the end and the extra internal state contributes nothing to the result. And some callers do odd things: - fs/hfs/string.c only allocates 32 bits of state - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes - Modify bytemask_from_count to handle inputs of 1..sizeof(long) rather than 0..sizeof(long)-1. This would simplify users other than full_name_hash" Special thanks to Bruce Fields for testing and finding bugs in v1. (I learned some humbling lessons about "obviously correct" code.) On the arch-specific front, the m68k assembly has been tested in a standalone test harness, I've been in contact with the Microblaze maintainers who mostly don't care, as the hardware multiplier is never omitted in real-world applications, and I haven't heard anything from the H8/300 world" * 'hash' of git://ftp.sciencehorizons.net/linux: h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h> | 28 May 2016, 23:15:25 UTC |
| 4684fe9 | George Spelvin | 25 May 2016, 18:19:49 UTC | h8300: Add <asm/hash.h> This will improve the performance of hash_32() and hash_64(), but due to complete lack of multi-bit shift instructions on H8, performance will still be bad in surrounding code. Designing H8-specific hash algorithms to work around that is a separate project. (But if the maintainers would like to get in touch...) Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp | 28 May 2016, 19:48:58 UTC |
| 7b13277 | George Spelvin | 25 May 2016, 15:06:09 UTC | microblaze: Add <asm/hash.h> Microblaze is an FPGA soft core that can be configured various ways. If it is configured without a multiplier, the standard __hash_32() will require a call to __mulsi3, which is a slow software loop. Instead, use a shift-and-add sequence for the constant multiply. GCC knows how to do this, but it's not as clever as some. Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> | 28 May 2016, 19:48:58 UTC |
| 14c44b9 | George Spelvin | 26 May 2016, 15:36:19 UTC | m68k: Add <asm/hash.h> This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647 for the original mc68000, which lacks a 32x32-bit multiply instruction. Yes, the amount of optimization effort put in is excessive. :-) Shift-add chain found by Yevgen Voronenko's Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.html Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org | 28 May 2016, 19:48:57 UTC |
| 468a942 | George Spelvin | 27 May 2016, 02:11:51 UTC | <linux/hash.h>: Add support for architecture-specific functions This is just the infrastructure; there are no users yet. This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares the existence of <asm/hash.h>. That file may define its own versions of various functions, and define HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones. Included is a self-test (in lib/test_hash.c) that verifies the basics. It is NOT in general required that the arch-specific functions compute the same thing as the generic, but if a HAVE_* symbol is defined with the value 1, then equality is tested. Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org Cc: Alistair Francis <alistai@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp | 28 May 2016, 19:48:31 UTC |
| 2a18da7 | George Spelvin | 23 May 2016, 11:43:58 UTC | fs/namei.c: Improve dcache hash function Patch 0fed3ac866 improved the hash mixing, but the function is slower than necessary; there's a 7-instruction dependency chain (10 on x86) each loop iteration. Word-at-a-time access is a very tight loop (which is good, because link_path_walk() is one of the hottest code paths in the entire kernel), and the hash mixing function must not have a longer latency to avoid slowing it down. There do not appear to be any published fast hash functions that: 1) Operate on the input a word at a time, and 2) Don't need to know the length of the input beforehand, and 3) Have a single iterated mixing function, not needing conditional branches or unrolling to distinguish different loop iterations. One of the algorithms which comes closest is Yann Collet's xxHash, but that's two dependent multiplies per word, which is too much. The key insights in this design are: 1) Barring expensive ops like multiplies, to diffuse one input bit across 64 bits of hash state takes at least log2(64) = 6 sequentially dependent instructions. That is more cycles than we'd like. 2) An operation like "hash ^= hash << 13" requires a second temporary register anyway, and on a 2-operand machine like x86, it's three instructions. 3) A better use of a second register is to hold a two-word hash state. With careful design, no temporaries are needed at all, so it doesn't increase register pressure. And this gets rid of register copying on 2-operand machines, so the code is smaller and faster. 4) Using two words of state weakens the requirement for one-round mixing; we now have two rounds of mixing before cancellation is possible. 5) A two-word hash state also allows operations on both halves to be done in parallel, so on a superscalar processor we get more mixing in fewer cycles. I ended up using a mixing function inspired by the ChaCha and Speck round functions. It is 6 simple instructions and 3 cycles per iteration (assuming multiply by 9 can be done by an "lea" instruction): x ^= *input++; y ^= x; x = ROL(x, K1); x += y; y = ROL(y, K2); y *= 9; Not only is this reversible, two consecutive rounds are reversible: if you are given the initial and final states, but not the intermediate state, it is possible to compute both input words. This means that at least 3 words of input are required to create a collision. (It also has the property, used by hash_name() to avoid a branch, that it hashes all-zero to all-zero.) The rotate constants K1 and K2 were found by experiment. The search took a sample of random initial states (I used 1023) and considered the effect of flipping each of the 64 input bits on each of the 128 output bits two rounds later. Each of the 8192 pairs can be considered a biased coin, and adding up the Shannon entropy of all of them produces a score. The best-scoring shifts also did well in other tests (flipping bits in y, trying 3 or 4 rounds of mixing, flipping all 64*63/2 pairs of input bits), so the choice was made with the additional constraint that the sum of the shifts is odd and not too close to the word size. The final state is then folded into a 32-bit hash value by a less carefully optimized multiply-based scheme. This also has to be fast, as pathname components tend to be short (the most common case is one iteration!), but there's some room for latency, as there is a fair bit of intervening logic before the hash value is used for anything. (Performance verified with "bonnie++ -s 0 -n 1536:-2" on tmpfs. I need a better benchmark; the numbers seem to show a slight dip in performance between 4.6.0 and this patch, but they're too noisy to quote.) Special thanks to Bruce fields for diligent testing which uncovered a nasty fencepost error in an earlier version of this patch. [checkpatch.pl formatting complaints noted and respectfully disagreed with.] Signed-off-by: George Spelvin <linux@sciencehorizons.net> Tested-by: J. Bruce Fields <bfields@redhat.com> | 28 May 2016, 19:45:29 UTC |
| ef703f4 | George Spelvin | 27 May 2016, 03:00:23 UTC | Eliminate bad hash multipliers from hash_32() and hash_64() The "simplified" prime multipliers made very bad hash functions, so get rid of them. This completes the work of 689de1d6ca. To avoid the inefficiency which was the motivation for the "simplified" multipliers, hash_64() on 32-bit systems is changed to use a different algorithm. It makes two calls to hash_32() instead. drivers/media/usb/dvb-usb-v2/af9015.c uses the old GOLDEN_RATIO_PRIME_32 for some horrible reason, so it inherits a copy of the old definition. Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Antti Palosaari <crope@iki.fi> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> | 28 May 2016, 19:42:51 UTC |
| 92d5677 | George Spelvin | 27 May 2016, 02:22:01 UTC | Change hash_64() return value to 32 bits That's all that's ever asked for, and it makes the return type of hash_long() consistent. It also allows (upcoming patch) an optimized implementation of hash_64 on 32-bit machines. I tried adding a BUILD_BUG_ON to ensure the number of bits requested was never more than 32 (most callers use a compile-time constant), but adding <linux/bug.h> to <linux/hash.h> breaks the tools/perf compiler unless tools/perf/MANIFEST is updated, and understanding that code base well enough to update it is too much trouble. I did the rest of an allyesconfig build with such a check, and nothing tripped. Signed-off-by: George Spelvin <linux@sciencehorizons.net> | 28 May 2016, 19:42:51 UTC |
| 917ea16 | George Spelvin | 20 May 2016, 17:31:33 UTC | <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() Finally, the first use of previous two patches: eliminate the separate ad-hoc string hash functions in the sunrpc code. Now hash_str() is a wrapper around hash_string(), and hash_mem() is likewise a wrapper around full_name_hash(). Note that sunrpc code *does* call hash_mem() with a zero length, which is why the previous patch needed to handle that in full_name_hash(). (Thanks, Bruce, for finding that!) This also eliminates the only caller of hash_long which asks for more than 32 bits of output. The comment about the quality of hashlen_string() and full_name_hash() is jumping the gun by a few patches; they aren't very impressive now, but will be improved greatly later in the series. Signed-off-by: George Spelvin <linux@sciencehorizons.net> Tested-by: J. Bruce Fields <bfields@redhat.com> Acked-by: J. Bruce Fields <bfields@redhat.com> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: linux-nfs@vger.kernel.org | 28 May 2016, 19:42:50 UTC |
| fcfd2fb | George Spelvin | 20 May 2016, 12:41:37 UTC | fs/namei.c: Add hashlen_string() function We'd like to make more use of the highly-optimized dcache hash functions throughout the kernel, rather than have every subsystem create its own, and a function that hashes basic null-terminated strings is required for that. (The name is to emphasize that it returns both hash and length.) It's actually useful in the dcache itself, specifically d_alloc_name(). Other uses in the next patch. full_name_hash() is also tweaked to make it more generally useful: 1) Take a "char *" rather than "unsigned char *" argument, to be consistent with hash_name(). 2) Handle zero-length inputs. If we want more callers, we don't want to make them worry about corner cases. Signed-off-by: George Spelvin <linux@sciencehorizons.net> | 28 May 2016, 19:42:50 UTC |
| f4bcbe7 | George Spelvin | 20 May 2016, 11:26:00 UTC | Pull out string hash to <linux/stringhash.h> ... so they can be used without the rest of <linux/dcache.h> The hashlen_* macros will make sense next patch. Signed-off-by: George Spelvin <linux@sciencehorizons.net> | 28 May 2016, 19:42:40 UTC |
| 4e8440b | Linus Torvalds | 28 May 2016, 19:38:50 UTC | Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "A fix for a regression introduced yesterday. The regression didn't show up here locally because I did not have PAGE_POISONING enabled. And buildbots discovered this only after it hit your tree. Thanks to Dan for the quick response" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: dev: use after free in detach | 28 May 2016, 19:38:50 UTC |
| a1842b2 | Linus Torvalds | 28 May 2016, 19:32:01 UTC | Merge tag 'chrome-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform Pull chrome platform updates from Olof Johansson "A handful of Chrome driver and binding changes this merge window: - a few patches to fix probing and configuration of pstore - a few patches adding Elan touchpad registration on a few devices - EC changes: a security fix dealing with max message sizes and addition of compat_ioctl support. - keyboard backlight control support There was also an accidential duplicate registration of trackpads on 'Leon', which was reverted just recently" * tag 'chrome-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: Revert "platform/chrome: chromeos_laptop: Add Leon Touch" platform/chrome: chromeos_laptop - Add Elan touchpad for Wolf platform/chrome: chromeos_laptop - Add elan trackpad option for C720 platform/chrome: cros_ec_dev - Populate compat_ioctl platform/chrome: cros_ec_lightbar - use name instead of ID to hide lightbar attributes platform/chrome: cros_ec_dev - Fix security issue platform/chrome: Add Chrome OS keyboard backlight LEDs support platform/chrome: use to_platform_device() platform/chrome: pstore: Move to larger record size. platform/chrome: pstore: probe for ramoops buffer using acpi platform/chrome: chromeos_laptop: Add Leon Touch | 28 May 2016, 19:32:01 UTC |
| 0723ab4 | Linus Torvalds | 28 May 2016, 19:23:12 UTC | Merge tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull more sound updates from Takashi Iwai: "This is the second update round for 4.7-rc1. Most of changes are about the pending ASoC updates and fixes, including a few new drivers. Below are some highlights: ASoC: - New drivers for MAX98371 and TAS5720 - SPI support for TLV320AIC32x4, along with the module split - TDM support for STI Uniperf IPs - Remaining topology API fixes / updates HDA: - A couple of Dell quirks and new Realtek codec support" * tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits) ALSA: hda - Fix headset mic detection problem for one Dell machine spi: spi-ep93xx: Fix the PTR_ERR() argument ALSA: hda/realtek - Add support for ALC295/ALC3254 ASoC: kirkwood: fix build failure ALSA: hda - Fix headphone noise on Dell XPS 13 9360 ASoC: ak4642: Enable cache usage to fix crashes on resume ASoC: twl6040: Disconnect AUX output pads on digital mute ASoC: tlv320aic32x4: Properly implement the positive and negative pins into the mixers rcar: src: skip disabled-SRC nodes ASoC: max98371 Remove duplicate entry in max98371_reg ASoC: twl6040: Select LPPLL during standby ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRS ASoC: simple-card: Add pm callbacks to platform driver ASoC: pxa: Fix module autoload for platform drivers ASoC: topology: Fix memory leak in widget creation ASoC: Add max98371 codec driver ASoC: rsnd: count .probe/.remove for rsnd_mod_call() ASoC: topology: Check size mismatch of ABI objects before parsing ASoC: topology: Check failure to create a widget ASoC: add support for TAS5720 digital amplifier ... | 28 May 2016, 19:23:12 UTC |
| 9ba55cf | Linus Torvalds | 28 May 2016, 19:04:17 UTC | Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Here are the outstanding target pending updates for v4.7-rc1. The highlights this round include: - Allow external PR/ALUA metadata path be defined at runtime via top level configfs attribute (Lee) - Fix target session shutdown bug for ib_srpt multi-channel (hch) - Make TFO close_session() and shutdown_session() optional (hch) - Drop se_sess->sess_kref + convert tcm_qla2xxx to internal kref (hch) - Add tcm_qla2xxx endpoint attribute for basic FC jammer (Laurence) - Refactor iscsi-target RX/TX PDU encode/decode into common code (Varun) - Extend iscsit_transport with xmit_pdu, release_cmd, get_rx_pdu, validate_parameters, and get_r2t_ttt for generic ISO offload (Varun) - Initial merge of cxgb iscsi-segment offload target driver (Varun) The bulk of the changes are Chelsio's new driver, along with a number of iscsi-target common code improvements made by Varun + Co along the way" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (29 commits) iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race cxgbit: Use type ISCSI_CXGBIT + cxgbit tpg_np attribute iscsi-target: Convert transport drivers to signal rdma_shutdown iscsi-target: Make iscsi_tpg_np driver show/store use generic code tcm_qla2xxx Add SCSI command jammer/discard capability iscsi-target: graceful disconnect on invalid mapping to iovec target: need_to_release is always false, remove redundant check and kfree target: remove sess_kref and ->shutdown_session iscsi-target: remove usage of ->shutdown_session tcm_qla2xxx: introduce a private sess_kref target: make close_session optional target: make ->shutdown_session optional target: remove acl_stop target: consolidate and fix session shutdown cxgbit: add files for cxgbit.ko iscsi-target: export symbols iscsi-target: call complete on conn_logout_comp iscsi-target: clear tx_thread_active iscsi-target: add new offload transport type iscsi-target: use conn_transport->transport_type in text rsp ... | 28 May 2016, 19:04:17 UTC |
| 1cbe06c | Linus Torvalds | 28 May 2016, 18:04:16 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma updates from Doug Ledford: "This is the second group of code for the 4.7 merge window. It looks large, but only in one sense. I'll get to that in a minute. The list of changes here breaks down as follows: - Dynamic counter infrastructure in the IB drivers This is a sysfs based code to allow free form access to the hardware counters RDMA devices might support so drivers don't need to code this up repeatedly themselves - SendOnlyFullMember multicast support - IB router support - A couple misc fixes - The big item on the list: hfi1 driver updates, plus moving the hfi1 driver out of staging There was a group of 15 patches in the hfi1 list that I thought I had in the first pull request but they weren't. So that added to the length of the hfi1 section here. As far as these go, everything but the hfi1 is pretty straight forward. The hfi1 is, if you recall, the driver that Al had complaints about how it used the write/writev interfaces in an overloaded fashion. The write portion of their interface behaved like the write handler in the IB stack proper and did bi-directional communications. The writev interface, on the other hand, only accepts SDMA request structures. The completions for those structures are sent back via an entirely different event mechanism. With the security patch, we put security checks on the write interface, however, we also knew they would be going away soon. Now, we've converted the write handler in the hfi1 driver to use ioctls from the IB reserved magic area for its bidirectional communications. With that change, Intel has addressed all of the items originally on their TODO when they went into staging (as well as many items added to the list later). As such, I moved them out, and since they were the last item in the staging/rdma directory, and I don't have immediate plans to use the staging area again, I removed the staging/rdma area. Because of the move out of staging, as well as a series of 5 patches in the hfi1 driver that removed code people thought should be done in a different way and was optional to begin with (a snoop debug interface, an eeprom driver for an eeprom connected directory to their hfi1 chip and not via an i2c bus, and a few other things like that), the line count, especially the removal count, is high" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (56 commits) staging/rdma: Remove the entire rdma subdirectory of staging IB/core: Make device counter infrastructure dynamic IB/hfi1: Fix pio map initialization IB/hfi1: Correct 8051 link parameter settings IB/hfi1: Update pkey table properly after link down or FM start IB/rdamvt: Fix rdmavt s_ack_queue sizing IB/rdmavt: Max atomic value should be a u8 IB/hfi1: Fix hard lockup due to not using save/restore spin lock IB/hfi1: Add tracing support for send with invalidate opcode IB/hfi1, qib: Add ieth to the packet header definitions IB/hfi1: Move driver out of staging IB/hfi1: Do not free hfi1 cdev parent structure early IB/hfi1: Add trace message in user IOCTL handling IB/hfi1: Remove write(), use ioctl() for user cmds IB/hfi1: Add ioctl() interface for user commands IB/hfi1: Remove unused user command IB/hfi1: Remove snoop/diag interface IB/hfi1: Remove EPROM functionality from data device IB/hfi1: Remove UI char device IB/hfi1: Remove multiple device cdev ... | 28 May 2016, 18:04:16 UTC |
| 8d057e3 | Benson Leung | 28 May 2016, 15:25:33 UTC | Revert "platform/chrome: chromeos_laptop: Add Leon Touch" This reverts commit bff3c624dc7261a084a4d25a0b09c3fb0fec872a. Board "Leon" is otherwise known as "Toshiba CB35" and we already have the entry that supports that board as of this commit : 963cb6f platform/chrome: chromeos_laptop - Add Toshiba CB35 Touch Remove this duplicate. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net> | 28 May 2016, 15:47:48 UTC |
| e6be18f | Dan Carpenter | 28 May 2016, 05:01:46 UTC | i2c: dev: use after free in detach The call to put_i2c_dev() frees "i2c_dev" so there is a use after free when we call cdev_del(&i2c_dev->cdev). Fixes: d6760b14d4a1 ('i2c: dev: switch from register_chrdev to cdev API') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 28 May 2016, 15:37:42 UTC |
| a8c5ddf | Anna-Maria Gleixner | 24 May 2016, 13:08:47 UTC | MIPS: Add missing FROZEN hotplug notifier transitions The corresponding FROZEN hotplug notifier transitions used on suspend/resume are ignored. Therefore the switch case action argument is masked with the frozen hotplug notifier transition mask. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: rt@linutronix.de Patchwork: https://patchwork.linux-mips.org/patch/13351/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:12 UTC |
| bb93078 | James Hogan | 24 May 2016, 08:35:11 UTC | MIPS: Build microMIPS VDSO for microMIPS kernels MicroMIPS kernels may be expected to run on microMIPS only cores which don't support the normal MIPS instruction set, so be sure to pass the -mmicromips flag through to the VDSO cflags. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13349/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:12 UTC |
| 13eb192 | James Hogan | 24 May 2016, 08:35:10 UTC | MIPS: Fix sigreturn via VDSO on microMIPS kernel In microMIPS kernels, handle_signal() sets the isa16 mode bit in the vdso address so that the sigreturn trampolines (which are offset from the VDSO) get executed as microMIPS. However commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") changed the offsets to come from the VDSO image, which already have the isa16 mode bit set correctly since they're extracted from the VDSO shared library symbol table. Drop the isa16 mode bit handling from handle_signal() to fix sigreturn for cores which support both microMIPS and normal MIPS. This doesn't fix microMIPS only cores, since the VDSO is still built for normal MIPS, but thats a separate problem. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13348/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:12 UTC |
| 5214cae | Antony Pavlov | 23 May 2016, 11:39:00 UTC | MIPS: devicetree: fix cpu interrupt controller node-names Here is the quote from [1]: The unit-address must match the first address specified in the reg property of the node. If the node has no reg property, the @ and unit-address must be omitted and the node-name alone differentiates the node from other nodes at the same level This patch adjusts MIPS dts-files and devicetree binding documentation in accordance with [1]. [1] Power.org(tm) Standard for Embedded Power Architecture(tm) Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. Chapter 2.2.1.1 Node Name Requirements Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13345/ Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:12 UTC |
| 94cc36b | Maciej W. Rozycki | 26 May 2016, 11:55:45 UTC | MIPS: VDSO: Build with `-fno-strict-aliasing' Avoid an aliasing issue causing a build error in VDSO: In file included from include/linux/srcu.h:34:0, from include/linux/notifier.h:15, from ./arch/mips/include/asm/uprobes.h:9, from include/linux/uprobes.h:61, from include/linux/mm_types.h:13, from ./arch/mips/include/asm/vdso.h:14, from arch/mips/vdso/vdso.h:27, from arch/mips/vdso/gettimeofday.c:11: include/linux/workqueue.h: In function 'work_static': include/linux/workqueue.h:186:2: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing] return *work_data_bits(work) & WORK_STRUCT_STATIC; ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1 with a CONFIG_DEBUG_OBJECTS_WORK configuration and GCC 5.2.0. Include `-fno-strict-aliasing' along with compiler options used, as required for kernel code, fixing a problem present since the introduction of VDSO with commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO"). Thanks to Tejun for diagnosing this properly! Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Tejun Heo <tj@kernel.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.3+ Patchwork: https://patchwork.linux-mips.org/patch/13357/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:12 UTC |
| 41cc07b | Matt Redfearn | 25 May 2016, 11:58:40 UTC | MIPS: Pistachio: Enable KASLR Allow KASLR to be selected on Pistachio based systems. Tested on a Creator Ci40. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13356/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:11 UTC |
| aedcfbe | Harvey Hunt | 25 May 2016, 10:06:35 UTC | MIPS: lib: Mark intrinsics notrace On certain MIPS32 devices, the ftrace tracer "function_graph" uses __lshrdi3() during the capturing of trace data. ftrace then attempts to trace __lshrdi3() which leads to infinite recursion and a stack overflow. Fix this by marking __lshrdi3() as notrace. Mark the other compiler intrinsics as notrace in case the compiler decides to use them in the ftrace path. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: <linux-mips@linux-mips.org> Cc: <linux-kernel@vger.kernel.org> Cc: <stable@vger.kernel.org> # 4.2.x- Patchwork: https://patchwork.linux-mips.org/patch/13354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:11 UTC |
| aa76042 | James Hogan | 27 May 2016, 21:25:23 UTC | MIPS: Fix 64-bit HTW configuration The Hardware page Table Walker (HTW) is being misconfigured on 64-bit kernels. The PWSize.PS (pointer size) bit determines whether pointers within directories are loaded as 32-bit or 64-bit addresses, but was never being set to 1 for 64-bit kernels where the unsigned long in pgd_t is 64-bits wide. This actually reduces rather than improves performance when the HTW is enabled on P6600 since the HTW is initiated lots, but walks are all aborted due I think to bad intermediate pointers. Since we were already taking the width of the PTEs into account by setting PWSize.PTEW, which is the left shift applied to the page table index *in addition to* the native pointer size, we also need to reduce PTEW by 1 when PS=1. This is done by calculating PTEW based on the relative size of pte_t compared to pgd_t. Finally in order for the HTW to be used when PS=1, the appropriate XK/XS/XU bits corresponding to the different 64-bit segments need to be set in PWCtl. We enable only XU for now to enable walking for XUSeg. Supporting walking for XKSeg would be a bit more involved so is left for a future patch. It would either require the use of a per-CPU top level base directory if supported by the HTW (a bit like pgd_current but with a second entry pointing at swapper_pg_dir), or the HTW would prepend bit 63 of the address to the global directory index which doesn't really match how we split user and kernel page directories. Fixes: cab25bc7537b ("MIPS: Extend hardware table walking support to MIPS64") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13364/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:11 UTC |
| 6446e6c | James Hogan | 27 May 2016, 21:25:22 UTC | MIPS: Add 64-bit HTW fields Add field definitions for some of the 64-bit specific Hardware page Table Walker (HTW) register fields in PWSize and PWCtl, in preparation for fixing the 64-bit HTW configuration. Also print these fields out along with the others in print_htw_config(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13363/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:11 UTC |
| f46d92e | Geert Uytterhoeven | 22 May 2016, 09:06:07 UTC | MAINTAINERS: Add file patterns for mips device tree bindings Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:11 UTC |
| 7ad2410 | Geert Uytterhoeven | 22 May 2016, 09:05:45 UTC | MAINTAINERS: Add file patterns for mips brcm device tree bindings Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13339/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:10 UTC |
| 5aadab0 | James Hogan | 20 May 2016, 22:28:41 UTC | MIPS: Simplify DSP instruction encoding macros Simplify the DSP instruction wrapper macros which use explicit encodings for microMIPS and normal MIPS by using the new encoding macros and removing duplication. To me this makes it easier to read since it is much shorter, but it also ensures .insn is used, preventing objdump disassembling the microMIPS code as normal MIPS. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13314/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:10 UTC |
| c84700c | James Hogan | 20 May 2016, 22:28:40 UTC | MIPS: Add missing tlbinvf/XPA microMIPS encodings Hardcoded MIPS instruction encodings are provided for tlbinvf, mfhc0 & mthc0 instructions, but microMIPS encodings are missing. I doubt any microMIPS cores exist at present which support these instructions, but the microMIPS encodings exist, and microMIPS cores may support them in the future. Add the missing microMIPS encodings using the new macros. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13313/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:10 UTC |
| 6e1b29c | James Hogan | 20 May 2016, 22:28:39 UTC | MIPS: Fix little endian microMIPS MSA encodings When the toolchain doesn't support MSA we encode MSA instructions explicitly in assembly. Unfortunately we use .word for both MIPS and microMIPS encodings which is wrong, since 32-bit microMIPS instructions are made up from a pair of halfwords. - The most significant halfword always comes first, so for little endian builds the halves will be emitted in the wrong order. - 32-bit alignment isn't guaranteed, so the assembler may insert a 16-bit nop instruction to pad the instruction stream to a 32-bit boundary. Use the new instruction encoding macros to encode microMIPS MSA instructions correctly. Fixes: d96cc3d1ec5d ("MIPS: Add microMIPS MSA support.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <Paul.Burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13312/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:10 UTC |
| 1c48a17 | James Hogan | 20 May 2016, 22:28:38 UTC | MIPS: Add missing VZ accessor microMIPS encodings Toolchains may be used which support microMIPS but not VZ instructions (i.e. binutis 2.22 & 2.23), so extend the explicitly encoded versions of the guest COP0 register & guest TLB access macros to support microMIPS encodings too, using the new macros. This prevents non-microMIPS instructions being executed in microMIPS mode during CPU probe on cores supporting VZ (e.g. M5150), which cause reserved instruction exceptions early during boot. Fixes: bad50d79255a ("MIPS: Fix VZ probe gas errors with binutils <2.24") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13311/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:10 UTC |
| 0dfa1c1 | James Hogan | 20 May 2016, 22:28:37 UTC | MIPS: Add inline asm encoding helpers To allow simplification of macros which use inline assembly to explicitly encode instructions, add a few simple abstractions to mipsregs.h which expand to specific microMIPS or normal MIPS encodings depending on what type of kernel is being built: _ASM_INSN_IF_MIPS(_enc) : Emit a 32bit MIPS instruction if microMIPS is not enabled. _ASM_INSN32_IF_MM(_enc) : Emit a 32bit microMIPS instruction if enabled. _ASM_INSN16_IF_MM(_enc) : Emit a 16bit microMIPS instruction if enabled. The macros can be used one after another since the MIPS / microMIPS macros are mutually exclusive, for example: __asm__ __volatile__( ".set push\n\t" ".set noat\n\t" "# mfgc0 $1, $%1, %2\n\t" _ASM_INSN_IF_MIPS(0x40610000 | %1 << 11 | %2) _ASM_INSN32_IF_MM(0x002004fc | %1 << 16 | %2 << 11) "move %0, $1\n\t" ".set pop" : "=r" (__res) : "i" (source), "i" (sel)); Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13310/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:09 UTC |
| 4939788 | Ralf Baechle | 21 May 2016, 22:39:18 UTC | MIPS: Spelling fix lets -> let's As noticed by Sergei in the discussion of Andrea Gelmini's patch series. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> | 28 May 2016, 10:35:09 UTC |
| a320a11 | Andrea Gelmini | 21 May 2016, 12:02:26 UTC | MIPS: VR41xx: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:09 UTC |
| 5004614 | Andrea Gelmini | 21 May 2016, 12:01:57 UTC | MIPS: oprofile: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: rric@kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Cc: oprofile-list@lists.sf.net Patchwork: https://patchwork.linux-mips.org/patch/13334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:09 UTC |
| e7e3346 | Andrea Gelmini | 21 May 2016, 12:01:51 UTC | MIPS: math-emu: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: macro@imgtec.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13333/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:09 UTC |
| 209b877 | Andrea Gelmini | 21 May 2016, 12:01:36 UTC | MIPS: lib: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:08 UTC |
| a90c59e | Andrea Gelmini | 21 May 2016, 12:01:27 UTC | MIPS: kernel: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: paul.burton@imgtec.com Cc: macro@imgtec.com Cc: james.hogan@imgtec.com Cc: jslaby@suse.cz Cc: adam.buchbinder@gmail.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13330/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:08 UTC |
| f5be47f | Andrea Gelmini | 21 May 2016, 12:01:20 UTC | MIPS: R6: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: macro@imgtec.com Cc: paul.burton@imgtec.com Cc: Leonid.Yegoshin@imgtec.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13329/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:08 UTC |
| a9e7e45 | Andrea Gelmini | 21 May 2016, 12:01:12 UTC | MIPS: IP22/IP28: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: adam.buchbinder@gmail.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13328/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:08 UTC |
| da66f8e | Andrea Gelmini | 21 May 2016, 12:00:40 UTC | MIPS: Cavium: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: david.daney@cavium.com Cc: janne.huttunen@nokia.com Cc: aaro.koskinen@nokia.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13324/ Patchwork: https://patchwork.linux-mips.org/patch/13325/ Patchwork: https://patchwork.linux-mips.org/patch/13326/ Patchwork: https://patchwork.linux-mips.org/patch/13327/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:07 UTC |
| 7a448b5 | Andrea Gelmini | 21 May 2016, 12:00:33 UTC | MIPS: MT: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13323/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:07 UTC |
| fb0f6e8 | Andrea Gelmini | 21 May 2016, 12:00:26 UTC | MIPS: Loongson64: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: chenhc@lemote.com Cc: viresh.kumar@linaro.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13322/ Patchwork: https://patchwork.linux-mips.org/patch/13332/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:07 UTC |
| dc3c273 | Andrea Gelmini | 21 May 2016, 12:00:18 UTC | MIPS: IP32: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13321/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:07 UTC |
| 87fd4e2 | Andrea Gelmini | 21 May 2016, 12:00:11 UTC | MIPS: IP27: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13320/ Patchwork: https://patchwork.linux-mips.org/patch/13335/ Patchwork: https://patchwork.linux-mips.org/patch/13336/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:07 UTC |
| e904b94 | Andrea Gelmini | 21 May 2016, 12:00:04 UTC | MIPS: BCM63xx: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13319/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:06 UTC |
| be9fde2 | Andrea Gelmini | 21 May 2016, 11:59:56 UTC | MIPS: Alchemy: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13318/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:06 UTC |
| 20430e7 | Andrea Gelmini | 21 May 2016, 11:59:48 UTC | MIPS: hazards.h: Fix typo Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: chenhc@lemote.com Cc: james.hogan@imgtec.com Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13317/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:06 UTC |
| 9b987c4 | Dan Carpenter | 08 November 2013, 09:44:31 UTC | MIPS: Lasat: A couple off by one bugs in picvue_proc.c These should be ">=" instead of ">" or we go past the end of the pvc_lines[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: linux-mips@linux-mips.org Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6124/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:06 UTC |
| 2b436a3 | Álvaro Fernández Rojas | 19 May 2016, 20:07:36 UTC | MIPS: ralink: add MT7628 EPHY LEDs pinmux support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13308/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:05 UTC |
| 07b50db | Álvaro Fernández Rojas | 19 May 2016, 20:07:35 UTC | MIPS: ralink: fix MT7628 wled_an pinmux gpio Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13307/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:05 UTC |
| d714682 | Álvaro Fernández Rojas | 19 May 2016, 20:07:34 UTC | MIPS: ralink: fix MT7628 pinmux typos Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13306/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:05 UTC |
| f03984c | James Hogan | 18 May 2016, 16:04:38 UTC | MIPS: Fix write_gc0_* macros when writing zero The versions of the __write_{32,64}bit_gc0_register() macros for when there is no virt support in the assembler use the "J" inline asm constraint to allow integer zero, but this needs to be accompanied by the "z" formatting string so that it turns into $0. Fix both macros to do this. Fixes: bad50d79255a ("MIPS: Fix VZ probe gas errors with binutils <2.24") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13289/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:05 UTC |
| 63a8802 | Matt Redfearn | 18 May 2016, 16:12:36 UTC | MIPS: CPS: Copy EVA configuration when starting secondary VPs. When starting secondary VPEs which support EVA and the SegCtl registers, copy the memory segmentation configuration from the running VPE to ensure that all VPEs in the core have a consistent virtual memory map. The EVA configuration of secondary cores is dealt with when starting the core via the CM. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13291/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:05 UTC |
| 5c33f8b | Matt Redfearn | 18 May 2016, 16:12:35 UTC | MIPS: Add definitions of SegCtl registers and use them The SegCtl registers are standard for MIPSr3..MIPSr5. Add definitions of these registers and use them rather than constants Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Chris Packham <judge.packham@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13290/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:04 UTC |
| dd31740 | Purna Chandra Mandal | 17 May 2016, 05:06:00 UTC | dt/bindings: Correct clk binding example for PIC32 gpio. Update binding example based on new clock binding scheme. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: linux-gpio@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13270/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:04 UTC |
| 761e52b | Purna Chandra Mandal | 17 May 2016, 05:05:59 UTC | dt/bindings: Correct clk binding example for PIC32 WDT. Update binding example based on new clock binding scheme. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13269/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:04 UTC |
| 58c3768 | Purna Chandra Mandal | 17 May 2016, 05:05:58 UTC | dt/bindings: Correct clk binding example for PIC32 DMT. Update binding example based on new clock binding scheme. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13268/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:04 UTC |
| 9c719d8 | Purna Chandra Mandal | 17 May 2016, 05:05:57 UTC | dt/bindings: Correct clk binding example for PIC32 serial. Update binding example based on new clock binding scheme. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: Andrei Pistirica <andrei.pistirica@microchip.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13267/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:04 UTC |
| 82cc37f | Purna Chandra Mandal | 17 May 2016, 05:05:56 UTC | dt/bindings: Correct clk binding example for PIC32 pinctrl Update binding example based on new clock binding scheme. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13266/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:04 UTC |
| 684b23c | Purna Chandra Mandal | 17 May 2016, 05:05:55 UTC | dt/bindings: Correct clk binding example for PIC32 SDHCI Update binding example based on new clock binding documentation. [1] Documentation/devicetree/bindings/clock/microchip,pic32.txt Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Joshua Henderson <digitalpeer@digitalpeer.com> Cc: Andrei Pistirica <andrei.pistirica@microchip.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13265/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:03 UTC |
| 0f2d988 | James Hogan | 17 May 2016, 23:08:49 UTC | MIPS: Fix incomplete separation of XPA CPU feature Commit 12822570a29b ("MIPS: Separate XPA CPU feature into LPA and MVH") wasn't fully applied, possibly due to a conflict with commit f270d881fa55 ("MIPS: Detect MIPSr6 Virtual Processor support"). This left decode_config5() referring to the non-existent MIPS_CPU_XPA, which breaks the build when XPA is enabled: arch/mips/kernel/cpu-probe.c In function ‘decode_config5’: arch/mips/kernel/cpu-probe.c:838:17: error: ‘MIPS_CPU_XPA’ undeclared (first use in this function) c->options |= MIPS_CPU_XPA; ^ Apply the missing hunk, dropping the CONFIG_XPA ifdef and setting the MIPS_CPU_MVH option when Config5.MVH is set. Fixes: 12822570a29b ("MIPS: Separate XPA CPU feature into LPA and MVH") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Link: https://patchwork.linux-mips.org/patch/13112/ Patchwork: https://patchwork.linux-mips.org/patch/13277/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:03 UTC |
| ba01cf0 | Paul Burton | 17 May 2016, 14:31:06 UTC | irqchip: mips-gic: Setup EIC mode on each CPU if it's in use When EIC mode is in use (cpu_has_veic is true) enable it on each CPU during GIC initialisation. Otherwise there may be a mismatch between the hardware default interrupt model & that expected by the kernel. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13274/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:03 UTC |
| d642e4e | Paul Burton | 17 May 2016, 14:31:05 UTC | MIPS: smp-cps: Clear Status IPL field when using EIC When using an external interrupt controller (EIC) the interrupt mask bits in the cop0 Status register are reused for the Interrupt Priority Level, and any interrupts with a priority lower than the field will be ignored. Clear the field to 0 by default such that all interrupts are serviced. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13273/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:03 UTC |
| 640356a | Paul Burton | 17 May 2016, 14:31:04 UTC | MIPS: Clear Status IPL field when using EIC When using an external interrupt controller (EIC) the interrupt mask bits in the cop0 Status register are reused for the Interrupt Priority Level, and any interrupts with a priority lower than the field will be ignored. Clear the field to 0 by default such that all interrupts are serviced. Without doing so we default to arbitrarily ignoring all or some subset of interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Joe Perches <joe@perches.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13272/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 28 May 2016, 10:35:02 UTC |
| ed2608f | Linus Torvalds | 28 May 2016, 02:14:35 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input subsystem updates from Dmitry Torokhov: "Just a few more driver fixes; new drivers will be coming in the next merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pwm-beeper - fix - scheduling while atomic Input: xpad - xbox one elite controller support Input: xpad - add more third-party controllers Input: xpad - prevent spurious input from wired Xbox 360 controllers Input: xpad - move pending clear to the correct location Input: uinput - handle compat ioctl for UI_SET_PHYS | 28 May 2016, 02:14:35 UTC |
| 06d2e78 | Linus Torvalds | 28 May 2016, 02:07:10 UTC | Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Here is the second pull request from I2C for this merge window: - one new feature (which nearly fell through the cracks): i2c-dev does now use the cdev API so it can handle >256 minors. Seems people do need that. - two fixes for the just added DMA feature for i2c-rcar - some typo fixes" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: dev: don't start function name with 'return' i2c: dev: switch from register_chrdev to cdev API i2c: xlr: rename ARCH_TANGOX to ARCH_TANGO i2c: at91: change log when dma configuration fails misc: at24: Fix typo in at24 header file i2c: rcar: should depend on HAS_DMA i2c: rcar: use dma_request_chan() | 28 May 2016, 02:07:10 UTC |
| 7d8eb50 | Linus Torvalds | 28 May 2016, 01:54:59 UTC | Merge branch 'for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: "This contains a nice FPU fixup from Eli Cooper for UML" * 'for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: add extended processor state save/restore support um: extend fpstate to _xstate to support YMM registers um: fix FPU state preservation around signal handlers | 28 May 2016, 01:54:59 UTC |
| 23a3e17 | Linus Torvalds | 28 May 2016, 01:49:29 UTC | Merge tag 'upstream-4.7-rc1' of git://git.infradead.org/linux-ubifs Pull UBI/UBIFS updates from Richard Weinberger: "This contains mostly cleanups and minor improvements of UBI and UBIFS" * tag 'upstream-4.7-rc1' of git://git.infradead.org/linux-ubifs: ubifs: ubifs_dump_inode: Fix dumping field bulk_read UBI: Fix static volume checks when Fastmap is used UBI: Set free_count to zero before walking through erase list UBI: Silence an unintialized variable warning UBI: Clean up return in ubi_remove_volume() UBI: Modify wrong comment in ubi_leb_map function. UBI: Don't read back all data in ubi_eba_copy_leb() UBI: Add ro-mode sysfs attribute | 28 May 2016, 01:49:29 UTC |
| e0714ec | Linus Torvalds | 28 May 2016, 00:20:27 UTC | nfs: fix anonymous member initializer build failure with older compilers Older versions of gcc don't understand named initializers inside a anonymous structure or union member. It can be worked around by adding the bracin gin the initializer for the anonymous member. Without this, gcc 4.4.4 will fail the build with CC fs/nfs/nfs4state.o fs/nfs/nfs4state.c:69: error: unknown field ‘data’ specified in initializer fs/nfs/nfs4state.c:69: warning: missing braces around initializer fs/nfs/nfs4state.c:69: warning: (near initialization for ‘zero_stateid.<anonymous>.data’) make[2]: *** [fs/nfs/nfs4state.o] Error 1 introduced in commit 93b717fd81bf ("NFSv4: Label stateids with the type") Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Anna Schumaker <Anna.Schumaker@netapp.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 28 May 2016, 00:20:27 UTC |
| d102a56 | Linus Torvalds | 28 May 2016, 00:14:05 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Followups to the parallel lookup work: - update docs - restore killability of the places that used to take ->i_mutex killably now that we have down_write_killable() merged - Additionally, it turns out that I missed a prerequisite for security_d_instantiate() stuff - ->getxattr() wasn't the only thing that could be called before dentry is attached to inode; with smack we needed the same treatment applied to ->setxattr() as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch ->setxattr() to passing dentry and inode separately switch xattr_handler->set() to passing dentry and inode separately restore killability of old mutex_lock_killable(&inode->i_mutex) users add down_write_killable_nested() update D/f/directory-locking | 28 May 2016, 00:14:05 UTC |
| 3767e25 | Al Viro | 27 May 2016, 15:06:05 UTC | switch ->setxattr() to passing dentry and inode separately smack ->d_instantiate() uses ->setxattr(), so to be able to call it before we'd hashed the new dentry and attached it to inode, we need ->setxattr() instances getting the inode as an explicit argument rather than obtaining it from dentry. Similar change for ->getxattr() had been done in commit ce23e64. Unlike ->getxattr() (which is used by both selinux and smack instances of ->d_instantiate()) ->setxattr() is used only by smack one and unfortunately it got missed back then. Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 28 May 2016, 00:09:16 UTC |
