Revision 21f1b8a6636c4dbde4aa1ec0343f42eaf653ffcc authored by Paolo Abeni on 26 April 2019, 10:50:44 UTC, committed by David S. Miller on 28 April 2019, 02:07:24 UTC
Currently, the UDP GRO code path does bad things on some edge
conditions - Aggregation can happen even on packet with different
lengths.

Fix the above by rewriting the 'complete' condition for GRO
packets. While at it, note explicitly that we allow merging the
first packet per burst below gso_size.

Reported-by: Sean Tong <seantong114@gmail.com>
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent fbef947
Raw File
yam.h
/*****************************************************************************/

/*
 *	yam.h  -- YAM radio modem driver.
 *
 *	Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
 *	Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
 *
 *	This program is free software; you can redistribute it and/or modify
 *	it under the terms of the GNU General Public License as published by
 *	the Free Software Foundation; either version 2 of the License, or
 *	(at your option) any later version.
 *
 *	This program is distributed in the hope that it will be useful,
 *	but WITHOUT ANY WARRANTY; without even the implied warranty of
 *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *	GNU General Public License for more details.
 *
 *	You should have received a copy of the GNU General Public License
 *	along with this program; if not, write to the Free Software
 *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *  Please note that the GPL allows you to use the driver, NOT the radio.
 *  In order to use the radio, you need a license from the communications
 *  authority of your country.
 *
 *
 */

/*****************************************************************************/

#define SIOCYAMRESERVED	(0)
#define SIOCYAMSCFG 	(1)	/* Set configuration */
#define SIOCYAMGCFG 	(2)	/* Get configuration */
#define SIOCYAMSMCS 	(3)	/* Set mcs data */

#define YAM_IOBASE   (1 << 0)
#define YAM_IRQ      (1 << 1)
#define YAM_BITRATE  (1 << 2) /* Bit rate of radio port ->57600 */
#define YAM_MODE     (1 << 3) /* 0=simplex 1=duplex 2=duplex+tempo */
#define YAM_HOLDDLY  (1 << 4) /* duplex tempo (sec) */
#define YAM_TXDELAY  (1 << 5) /* Tx Delay (ms) */
#define YAM_TXTAIL   (1 << 6) /* Tx Tail  (ms) */
#define YAM_PERSIST  (1 << 7) /* Persist  (ms) */
#define YAM_SLOTTIME (1 << 8) /* Slottime (ms) */
#define YAM_BAUDRATE (1 << 9) /* Baud rate of rs232 port ->115200 */

#define YAM_MAXBITRATE  57600
#define YAM_MAXBAUDRATE 115200
#define YAM_MAXMODE     2
#define YAM_MAXHOLDDLY  99
#define YAM_MAXTXDELAY  999
#define YAM_MAXTXTAIL   999
#define YAM_MAXPERSIST  255
#define YAM_MAXSLOTTIME 999

#define YAM_FPGA_SIZE	5302

struct yamcfg {
	unsigned int mask;		/* Mask of commands */
	unsigned int iobase;	/* IO Base of COM port */
	unsigned int irq;		/* IRQ of COM port */
	unsigned int bitrate;	/* Bit rate of radio port */
	unsigned int baudrate;	/* Baud rate of the RS232 port */
	unsigned int txdelay;	/* TxDelay */
	unsigned int txtail;	/* TxTail */
	unsigned int persist;	/* Persistence */
	unsigned int slottime;	/* Slottime */
	unsigned int mode;		/* mode 0 (simp), 1(Dupl), 2(Dupl+delay) */
	unsigned int holddly;	/* PTT delay in FullDuplex 2 mode */
};

struct yamdrv_ioctl_cfg {
	int cmd;
	struct yamcfg cfg;
};

struct yamdrv_ioctl_mcs {
	int cmd;
	unsigned int bitrate;
	unsigned char bits[YAM_FPGA_SIZE];
};
back to top